Koden Electronics RB715A Marine Radar RA41C User Manual 08

Download:
Mirror Download [FCC.gov]
Document ID	111100
Application ID	kNG5zIS4SpD2PVoP9uNgyQ==
Document Description	08
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Microsoft Word - pdf
Filesize	10.77kB (134657 bits)
Date Submitted	2000-07-30 00:00:00
Date Available	2000-12-12 00:00:00
Creation Date	2000-07-31 07:03:50
Producing Software	Acrobat Distiller 4.0 for Windows
Document Lastmod	2000-07-31 07:03:51
Document Title	08

5.3 Basic Operations
xxx = keys to press
5.3.1 Powering On and Off
POWER ON
POWER
Press "POWER"key to power on.
2 minutes timer and "RADAR OFF" are displayed.
Keep pressing "POWER" key to power off.
SCREEN
BRILL
Press the "BRIL" key.
Control bar is indicated on the screen.
.75
.25
HU
brilliance
Select brilliance.
Up/Down
key backlight
1:58
OFF
Adjust brilliance with RADAR
knob.
Select key backlight.
Control knob
Up/Down
Adjust key backlight
with
BRILLIANCE
50
Control knob
KEY BACK LIGHT 4
knob.
ENT
Press "ENT"key to return.
Radar turns into "ST'BY"mode when 2 minutes timer is finished and
"ST'BY" is displayed.
5.3.2 Transmitting
START
Press "POWER" key to
POWER
operate,
appears
radar
on
‚V
‚T
picture
the
AT
‚Q
‚T
‚g
‚t
screen.
Another press "POWER" key,
radar
turns
to
stand-by
mode.
Keep pressing "POWER" key more than 3 seconds, radar
turns to power off.
CHANGE
RANGE
RANG UP or
Pressing "RANGE UP" key produces a long-distance range,
RANGE DOWN
"RANGE
DOWN"
30
key
short-distance
range.
5.3.3 Adjusting brilliance of screen and key-backlight
xxx = keys to press
(1) Press the "BRILL" key. (Bar and figure indicating brightness, and figure indicating backlight appears on the screen.)
(2) Select brilliance or key-backlight with the up-down cursor.
(3) Adjust each item with the control knob.
(4) When the adjustment is finished, press either the "BRILL" key or the "ENT" key to exit
from the adjustment screen. (Pressing some other key after adjustment will lead to the
function of the pressed key.)
BRIL
→ BRIL or ENT
→
Control knob (Adjustment of brilliance)
→
Up/Down (Adjustment of brightness, panel) → Other function key Shift to other functions
. 75
. 25
HU
ST’BY
BRILLIAM CE
50
KEY BACKLIGNT 4
5.3.4 Changing Distance Range (RANGE UP, RANGE DOWN)
Pressing "RANGE UP" key produces a long-distance range, and "RANGE DOWN" key a
short-distance range.
••RADOME SCANNER (RA40C)
•0.25
0.5
0.75
1.5
12
24
Number of
rings
RANGE
0.125
Range ring
interval
0.062
0.125
0.25
0.25
0.25
0.5
0.5
0.75
1.5
12
24
RADOME SCANNER (RA41C)
RANGE
0.125
0.25
36
Number of rings
Range ring interval
0.0625
0.125
0.25
0.25
0.25
0.5
0.25
48
OPEN SCANNER (RA42C)
RANGE
0.125
0.5
0.75
1.5
12
24
Number of rings
Range ring interval
0.0625
0.125
0.25
0.25
0.25
0.5
5.3.5 Automatic adjustment (AUTO)
AUTO adjusts the GAIN, STC and FTC automatically.
If the "AUTO" key is pressed while GAIN, STC, or FTC are under manual settings, they
will all be switched to AUTO or HBR(Harbor) mode.
Pressing "AUTO" key, AT1, AT2 and HBR changes in turn. Pressing STC key, all
31
controls return to manual state.
Use when find navigation way in much echo such as port area, narrow channel,
small islands area. The control condition is similar to slightly down GAIN.
AT2 Use at open sea to suppress the sea clutter. The control condition is similar to
high GAIN.
HBR Use at in a bay area, inlet, or a harbor. The control condition becomes manual
STC by
using the value established HARBOR of ADJUST menu.
Note) Refer to "Setting STC circuit(STC)" in section 5.5.4.5.4(6).
Note) When you select HBR mode, FTC will be switched to MANU mode.
AT1
* What happens if GAIN, STC, and FTC keys are pressed during AUTO operation?
1) If GAIN key is pressed,
Only GAIN enters a manual state.
2) If FTC key is pressed,
Only FTC enters manual state.
3) If STC key is pressed,
STC, GAIN, and FTC enter manual state.
5.3.6 Sensitivity adjustment (GAIN)
(1)
When the "GAIN" key is pressed, the GAIN
display on the left side of the screen will be
. 75
.25
HU
reversed as
G 35 and the adjustable state will be entered.
ST’BY
(2) When the control knob is turned, the figure will
be shifted within a range of 0 and 99, and the
sensitivity can be manually adjusted.
G 50
When
the "AUTO" key is pressed, all (GAIN, STC and
FTC) will enter an AUTO state.
(3)
After the adjustment is finished, press the
"GAIN" key to exit from the adjustment state. If
some other function key is pressed, shift to
that function will take place.
(a) To make adjustments by MANUAL (When the GAIN key is pressed under AUTO operation,
shift to a manual operation will take place.)
GAIN
→ Control knob
→
GAIN -------------------------The adjustment state is ended.

µθ>
Other function key • ------Shift to other functions
µθ> AUTO
µθ>
AUTO ------------------------GAIN, STC, and FTC are set at AUTO and the
adjustment state is ended.
(b) To switch from the MANUAL state
AUTO -------------------------------------------------------------------------Set GAIN, STC and FTC at AUTO
5.3.7 Removing sea clutter (STC)
32
(1) When the "STC" key is pressed, the STC display on the left side of the screen will be
reversed as S 35 and the adjustable state will be entered.
(2) When the control knob is turned, the figure will be shifted within a range of 0 and 99,
and the STC can be manually adjusted. When the "AUTO" key is pressed, all (GAIN,
STC and FTC) will enter an AUTO state.
(3) After the adjustment is finished, press the "STC" key to exit from the adjustment state.
If some other function key is pressed, shift to that function will take place.
(a) To make adjustments by MANUAL (When the STC key is pressed under AUTO operation,
shift to a manual operation will take place.)
STC
→ Control knob →
STC ----------------------------The adjustment state is ended.

→
Other function key • --------Shift to other functions
→ AUTO
→
AUTO --------------------------STC, GAIN, and FTC are set at AUTO and the
adjustment state is ended.
NOTE) When you select MANU mode, GAIN and FTC will be switched to MANU mode, too.
(b) To switch from the MANUAL state
AUTO -------------------------------------------------------------------------Set STC, GAIN and FTC at AUTO
5.3.8 Removing rain and snow clutter (FTC)
(1) When the "FTC" key is pressed, the FTC display
on the left side of the screen will be reversed as
F 500 and the adjustable state will be entered.
. 75
.25
HU
(2) When the control knob is turned, the figure will
ST’BY
be shifted within a range of 0 and 99, and the
sensitivity can be manually adjusted.
When
F 50
the "AUTO" key is pressed, all (GAIN, STC and
FTC) will enter an AUTO state.
(3)
After the adjustment is finished, press the
"FTC" key to exit from the adjustment state. If
some other function key is pressed, shift to
that function will take place.
(a) To make adjustments by MANUAL (When the FTC key is pressed under AUTO operation,
shift to a manual operation will take place.)
FTC
→ Control knob
→
FTC

µθ>
Other function key -------Shift to other functions
µθ> AUTO
µθ>
AUTO ------------------------GAIN, STC, and FTC are set at AUTO and the
-------------------------The adjustment state is ended.
adjustment state is ended.
(b) To switch from the MANUAL state
AUTO -------------------------------------------------------------------------Set GAIN, STC and FTC at AUTO
33
5.3.9 Man Over Board (MOB)
Pressing the MOB key will send the own ship's position data to the external equipment
through NMEA port with "WPL" format. There is no change on the screen.
To check the MOB position data, select "MOB" from the "WINDOW" menu in the "SETUP".
The position of MOB and current position will be displayed on the screen. If press the "MOB"
key while watching the MOB screen, MOB data will be cleared and return to previous screen.
If press other keys, MOB data will be remained and return to previous screen.
34

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : Yes
Create Date                     : 2000:07:31 07:03:50
Producer                        : Acrobat Distiller 4.0 for Windows
Modify Date                     : 2000:07:31 07:03:51-04:00
Page Count                      : 5

EXIF Metadata provided by EXIF.tools