KA1KSTMXSLA KA1KSTMXRDA 1200W Deluxe Stand Mixer User Manual KA1KSTMX A

2015-09-18

: Kogan Ka1Kstmx-A KA1KSTMX-A usermanuals files

Open the PDF directly: View PDF PDF.
Page Count: 6

General Safety Instructions
Read the operating instructions carefully before putting the appliance into
operation and keep a copy of the instructions handy for future reference. If you
give this device to other people, please also pass on these operating
instructions.
The appliance is designed exclusively for private use. This appliance is not
fit for commercial use. Do not use it outdoors. Keep it away from sources
of heat, direct sunlight, humidity (never dip it into any liquid) and sharp
edges. Do not use the appliance with wet hands. If the appliance is humid
or wet, unplug it immediately.
When cleaning or putting it away, switch off the appliance and pull the
plug out from the socket (pull on the plug, not the cable). If the appliance
is not being used, remove any attached accessories.
Do not operate the machine without supervision. If you should leave the
working space, always switch the machine off or remove the plug from
the socket (pull the plug itself, not the lead).
Check the appliance and the cable for damage on a regular basis. Do not
use the appliance if it is damaged.
Do not try to repair the appliance on your own. Always contact the Kogan
customer service team. To avoid exposure to danger, always have a faulty
cable replaced only by a Kogan technician.
Pay careful attention to the “Special Safety Instructions” section.
Children and Frail Individuals
In order to ensure children's safety, please keep all packaging (plastic
bags, boxes, polystyrene etc..) out of their reach.
In order to protect children or frail individuals from hazards, please ensure
that this device is only ever used under supervision. This device is not a
toy. Do not allow small children to play with it.
Special Safety Instructions
Do not interfere with any safety switches.
Do not insert anything into the rotating hooks while the machine is
working.
Place the machine on a smooth, flat and stable working surface.
Do not insert the mains plug of the machine into a power socket without
having first installed all of the necessary accessories.
Remove and discard all packaging materials and stickers before use.
This appliance is for household use only. Do not use in moving vehicles or
on boats. Do not use outdoors, and do not use for any purposes other
than its intended use.
Unplug the mixer when the work is done.
Never raise the arm until the motor has completely stopped working and
all accessories have stopped moving completely.
Never immerse the motor into water for cleaning.
Keep children away when operating. Children should never be allowed to
use this product.
This appliance can be used by persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if they have been
given instruction concerning use of the appliance in a safe way and if they
understand the hazards involved.
Do not use the appliance near the edge of a countertop or table. Ensure
the surface is level, clean and free or water and other substances. Please
be aware that vibration during use may cause the appliance to move in
unexpected ways.
Do not use the appliance on (or close to) a hot gas or electric burner, or
where it could touch a heated oven or surface.
Do not allow the cord to hang over the edge of a countertop or to
become knotted.
To avoid electric shock, do not immerse the cord, plug or motor base in
water or any other liquids.
Installation of a residual current device (such as a standard safety switch
on your wall socket) is recommended to provide additional safety
protection when using appliances. It is advisable that a safety switch (with
a rated residual operating current not more than 30mA) be installed in the
electrical circuit supplying the appliance.
In order to avoid the possible hazard of the unit starting by itself due to
inadvertent resetting of the overload protector on the motor, do not
attach an external switching device (such as a timer) or connect the
appliance to a circuit that can switch the unit on and off.
Do not operate the appliance with a damaged cord or plug, after the
appliance malfunctions, or if the appliance is dropped or damaged in any
way. Stop use immediately and contact the Kogan customer support
team.
Only use the bowl, accessories and attachments that are supplied. The use
of accessories not supplied by Kogan.com may result in fire, electric
shock, damage to the unit or personal injury.
Always ensure the appliance is fully assembled securely before operating.
If the motor appears to be straining under a heavy load, do not operate
continuously for longer than 10 seconds at a time. Allow the motor to rest
for 1 minute between uses on heavy loads.
Never leave the appliance unattended while in use.
Keep fingers, hands, hair and clothing away from the accessories during
use. Always unplug the appliance and unplug at the wall before raising the
arm.
Be careful when handling or cleaning the accessories as they can be
sharp.
Do not raise the arm while the blender is operating.
Never attempt to use appliance with damaged accessories or with any
foreign utensils inside the bowl.
Never mix boiling hot liquids. Allow the temperature to drop before
putting into the lowering the arm and turning unit on.
Do not expose the bowl and accessories to temperature extremes. For
example do not lower extremely cold beaters into extremely hot mixture.
Before moving the mixer, cleaning or putting it away, always turn the
blender off and unplug it at the wall.
Never run the mixer while empty.
Do not overfill.
DANGER OF OVERLOADING! Please use the device either as a mincer or a
mixer, but never both functions at the same time.
Component Overview
Main Components and Standard Accessories
1 Drive Shaft 6 Power Cord
2 Cap of arm 7 Mixing Bowl
3a Front Protector 8a Stirrer
3b Jar Protector 8b Kneading Hook
4 Arm raising/lowering lever 8c Whisk
5 Pulse operator and lever regulator
Using the Mixing Bowl
WARNING: AVOID INJURIES BY ENSURING THE UNIT IS UNPLUGGED FROM
THE WALL POWER SOCKET BEFORE SETTING MIXER UP!
1. Place the mixing bowl into its holding device, then turn the bowl in the
direction of the LOCK until it locks into place.
2. In order to lift the arm, press the lever (4) downwards in the direction of
the arrow. The arm will now move upwards.
3. Mount the required utensil by inserting the top into the drive shaft, then
lock the cotter pin into the shaft by turning utensil to the right.
4. Fill the bowl with your ingredients. (Do not overfill the machine – the
maximum quantity of ingredients is 1.5kg)
5. Lower the arm using the lever (4).
6. Insert the mains plug into the wall power socket.
7. Switch the machine on, using the level regulator to a speed between 1 and
6 (depending on the mixture).
8. For pulse operations (kneading at short intervals), turn the switch to the
“PULSE” position. The switch has to be held in this position according to
the desired mixing duration length. When the switch is released, it will
return automatically to the “0” position.
Levels and Hook Usage for Mixtures of less than 1.5kg
Levels Use Type of Mixture
1 – 2 Kneading Hook Heavy mixtures (bread or short pastry)
3 – 4 Stirrer Medium-heavy mixtures (crepes or sponge)
5 – 6 Whisk Light mixtures (cream, egg white, blancmange)
Pulse Whisk Intervals (mixing under sponge, egg white etc...)
Note: with heavy mixtures, do not operate the machine for more than ten
minutes. Allow it to cool down for a further ten minutes.
Note: use the splash guard to protect against liquid mixture spillage.
9. After kneading/stirring, turn the switch (5) back to the “0” position as
soon as the mixture has formed a ball. Remove the mains plug from the
wall socket.
10. Press the lever (4) downwards and the arm will be raised.
11. The mixture can now be released with the help of a spatula from the
mixing bowl.
12. The mixing bowl can now be removed by turning it to the left.
13. Clean the parts as described under the “Cleaning” section.
WARNING: BE SURE TO UNPLUG THE MAINS PLUG FROM THE WALL BEFORE
RAISING THE ARM AND REMOVING THE BOWL.
Cleaning
Remove the mains plug from the power socket before cleaning.
Never immerse the unit housing with the motor in water!
Do not use any sharp objects or abrasive detergents.
Only a damp cloth should be used to clean the outside of the housing.
All components (mixing bowls, hooks etc...) that come into contact with
food can be cleaned with soapy water.
Note: No components are suitable for dishwasher cleaning.

Navigation menu