PTPSMREP1PA Pestill Possum Repeller User Manual PTPSMREP1PA2 QSG
2016-03-31
: Kogan Ptpsmrep1Pa2-Qsg PTPSMREP1PA2-QSG usermanuals files
Open the PDF directly: View PDF 
.
Page Count: 7
This quick start guide is designed to help you get started in the safe and effective
operation of your unit. Please keep a copy of it handy for future reference.
Table of Contents
Product Introduction......................................................................................................................................1
Safety Warnings...............................................................................................................................................1
Product Layout................................................................................................................................................2
How It Works....................................................................................................................................................2
Ultrasonic......................................................................................................................................................2
Strobe Light.................................................................................................................................................2
Alarm..............................................................................................................................................................2
Turbo..............................................................................................................................................................3
Usage...................................................................................................................................................................3
Using the A/C adapter.............................................................................................................................3
Installing the Batteries.............................................................................................................................3
Turning the device ON and OFF..........................................................................................................3
Turning the strobe ON/OFF..................................................................................................................3
Settings...............................................................................................................................................................4
Manufacturer Settings.............................................................................................................................4
Frequency Dial............................................................................................................................................4
Sensitivity Dial............................................................................................................................................4
Placement.....................................................................................................................................................4
Mounting to a Wall....................................................................................................................................5
Product Specifications..................................................................................................................................5
Training a Pet....................................................................................................................................................5
9 Ways to Keep Pests Away.......................................................................................................................6
Product Introduction
The repeller is the most advanced outdoor anti-pest product on the market today. It will
provide dramatic results without the use of poisons or chemicals and is completely safe
for humans and pets, while not harming the animals you wish to keep away either.
It can be powered by mains power or via four C batteries (not included), is
weatherproof in design and should be used outdoors.
It is equipped with an infra-red motion sensor that will activate when pests are in range.
The strobe light and alarm are secondary functions.
Safety Warnings
•Read instructions fully before using product.
•Do not restrict airflow around the unit. Do not position behind furniture or
curtains. For best results, position unit in an open space.
•Do not attempt to open the unit.
•The repeller is not a toy, so please do not allow small children to play with it. Do
not allow the unit to come into close range of your ears due to the ultrasonic
tones.
•Please consider other people and their privacy and comfort before using the
alarm and strobe light.
1
Product Layout
How It Works
The unit has three different components that use different scientific methods to get rid
of pests. Ultrasonic, strobe light and the alarm.
Ultrasonic
A high pressure ultrasonic sound that is only barely audible to human ears. This pest
repelling technique emits a disorientating siren that startles and frightens away
unwanted animals from your backyard or while out on a camping trip.
Using a variable pulse generator, the pest repeller emits a range of fluctuating sound
waves so that pests do not get accustomed to them.
Once the unit is switched on, the tone will automatically sound and pests will begin to
be warded off immediately.
Note: if you have any insects or rodents as pets, we recommend you keep your pets
away from this device.
Strobe Light
The strobe light will be most effective at night to fighten away night-time visitors. A
disorientating flashing light at a strobe frequency of 10 flashes per 20 seconds will be
emitted from the unit.
Alarm
The high-pitched alarm is a great way to scare off larger animals such as dogs, foxes
and cats (as well as unwanted people sneaking around your property at night) with a
sound that can be heard up to 600 metres away.
This option is ideal in isolated or remote locations, however short usage in a residential
zone from a human intruder would also be highly effective. If you do not wish to use this
function, turn the “sonic volume” dial to zero.
2
Turbo
When activated, the Turbo turns on all functions for 20 seconds (Ultrasonic, sonic and
strobe). This can startle an intruder or large animal from entering your campsite or
yard, giving you time to get help or leave the area.
This function will work even when the device is in standby mode, and can function 24
hours a day regardless of the Operating Time set.
To adjust the volume of the alarm, remove the back cover and adjust the Sonic Volume.
Usage
Plug the unit into your A/C mains power or install the batteries.
Using the A/C adapter
Remove the back cover of the unit by gently pulling it off. Plug one end of the A/C
adaptor into the 9 volt port jack located beside the sensitivity dial. Plug the other end
into any standard wall socket. Place the A/C cord through the notch cut out on the
bottom of the unit, then replace the back cover by snapping it back into place.
Unplugging the unit will revert it to the manufacturers settings. Both alarm and strobe
settings will be off while the ultrasonic setting will be on.
Note: when operating the unit via the A/C adaptor, the unit will automatically switch to
battery power in the event of power failure.
Installing the Batteries
The unit uses four C sized batteries. To install batteries, remove the back panel by gently
pulling it off. Install the batteries to match the positive and negative poles printed in the
unit. With the batteries in place, replace the back cover of the unit until is snaps closed.
Turning the device ON and OFF
The device itself does not have an ON/OFF switch. To turn it off, unplug it, remove the
batteries or use the standby mode on the remote control. When the unit is plugged in
or the batteries are installed, it will trigger a red sensor light within 20 seconds. The
light will stay on for about 20 seconds, after which the device will be ready to operate.
To create an audio and visual assault on the animals senses, driving them from your
property, the strobe light will flash repeatedly in quick succession. The strobe light will
only function at night.
Turning the strobe ON/OFF
Adjust the ultrasonic switch to any setting except for power off. Once the unit is on, it
will be triggered automatically by flashing for two seconds. To turn off, simply adjust
the ultrasonic switch to power off.
3
Settings
You can set custom settings to the unit via the simple set of control switches.
CONT. SWEEP will activate a
range of sonic and ultrasonic
frequencies at random
intervals. Motion detection is
deactivated in this mode.
To set the unit to
proximity sensor
operation, adjust the
switch to MOTION
SENSOR.
To set the unit to
continuous operation,
adjust the switch to
CONSTANT.
Manufacturer Settings
The main function of this product is the ultrasonic feature. The sensor settings gives you
the choice to have the unit work only when the sensor is triggered. The continue setting
gives you the option to have the ultrasonic function for 20 seconds, then pause for 20
seconds in a cycle.
For the most effective operation of the unit, we suggest you use the continuous mode
to keep pests away.
Frequency Dial
There are several types of pests listed around the frequency dial, which
matches the frequencies that are ideal for repelling them. Turn the dial to the
setting that best suits your needs. If you need to repel more than one type of
pest, set the dial somewhere within the ranges of both pests. Adjust the
frequency slightly every few weeks to avoid allowing the pests to adapt to the
sound.
Sensitivity Dial
Your device can be set to activate only when animals come into range. Set the mode
switch to "motion sensor" to select this feature. When an animal or human enters the
range of the device, it will activate the ultrasonic and sonic alarms. The sensitivity dial
adjusts the distance at which the device's motion detection sensor will work.
Placement
It is important to place the device where it will be most effective. Place the unit near the
height of the animal you want to repel, facing the area that they most like to frequent.
Do not place the unit on the ground as this will limit the effective range of the device. It
can be mounted on a wall, tree, fence, stairs or even mailbox. If the device is mounted
off the ground but substantially higher than the animals eye level, tilt it downwards
somewhat.
For animals that nest in trees, such as birds or possums, place the device in the tree or
on your rooftop. The ultrasonic frequency has a range of approximately 20 metres,
however the closer the animal is to the unit, the more effective it will be.
Ultrasonic signals cannot penetrate solid surfaces, so ensure that there are no windows,
doors, fences or other items inbetween the device and the area you want to cover.
4
Mounting to a Wall
Two screws and fasteners are included with this unit for mounting on walls. Simply drill
screws into a suitable or upright surface. Align the
back of the unit where the two mounting holes are to the screw heads.
Note: if installing outdoors, it is recommended that you place the unit at least 3 feet
above the ground for optimum range. Make sure that the speaker is facing the area you
want covered and that the A/C outlet is protected from the weather.
Product Specifications
AC Adapter: 240V, 9VDC/400mA x 1
Batteries: 4 x 1.5V C size batteries (not included)
Ultrasonic Frequency: 15kHz to 25KHz (adjustable)
Output Sound Pressure: 0 ~ 110dB
Working Current: Up to 300mA
Optimum Distances: Infra-red sensor 30 feet
Effective range 5000 square feet
Training a Pet
Some people try the device on their pets to see if it works, or to train the pet to not
enter a particular area. It is important to remember that your pet is used to living in
comfort in your home. While he or she may be annoyed by the sound, they may not be
deterred from the room. As far as your pet is concerned, they have full access to your
house. An outdoor animal on the other hand, is sensitive to noise and alert to danger.
The same way that the alarm will repel an intruder, the ultrasonic signal will repel an
unwanted animal.
If you do want to use the ultrasonic device to deter your cat or dog from a certain part
of the house, you will need to train them. When the device activates, show them
through behavioural training what they should do. Demonstrate that when it is time for
them to leave the room, they will hear the noise and that leaving the room will stop the
noise. Dogs will be easier to train than cats.
Note: just like your pet, wild animals will have certain habits and behaviours that can
change over time. If they are accustomed to finding food in your backyard, they may
continue to come even if they are disturbed by the ultrasonic noise, especially if they
cannot find food elsewhere. The device is designed to work in combination with other
good pest management practices, such as those given below.
5
9 Ways to Keep Pests Away
Many pests can be kept away from your living spaces by following these rules.
1. Keep the garbage lid closed in your kitchen.
2. Store all food in airtight containers.
3. Pet food and water should be put away overnight.
4. Repair plumbing leaks and cracks.
5. Drain liquids and wash recyclable containers before recycling them.
6. The accumulation of paper products such as cardboard boxes, bags, newspapers
etc... should be avoided.
7. Keep grass short around the foundations of the house and trees/shrubs should be
planted away from the house.
8. Screen all vent openings such as crawl spaces, attics, laundry vents and heating
ducts.
9. Repair and adjust broken or damaged windows and screen doors.
If you have any further questions regarding the use of this product, please contact
the Kogan.com customer support team.
6
