TP TL WPA7510KIT Quick Installation Guide
7106507481 Tl-Wpa7510 Kit Qig V1 7106507481_TL-WPA7510 KIT_QIG_V1 7106507481_TL-WPA7510 KIT_QIG_V1 static.tp-link.com 3:
2017-10-24
: Kogan Tp Tl-Wpa7510Kit Quick Installation Guide TP--TL-WPA7510KIT_Quick_Installation_Guide TP--TL-WPA7510KIT usermanuals files
Open the PDF directly: View PDF 
.
Page Count: 2
| Download | |
| Open PDF In Browser | View PDF |
3 Quick Installation Guide Pair the powerline devices. A Press the adapter‘s Pair button for 1 second. TL-WPA7510 KIT The Power LED starts blinking. Note: If the LED does not blink, press the button again. B Within 2 minutes, press the extender’s Pair button for 1 second. The Power LED starts blinking. When the Powerline LED turns on, the pairing process is complete. On * TL-WPA7510 KIT (European version) is used for demonstration in this QIG. Blinking On Pair Wi-Fi LED Pair Reset Blinking Within 2 minutes 1000 bps 0M 100 Adapter TL-PA7010 Extender TL-WPA7510 4 s Mbp 1000 2 Adapter TL-PA7010 ine rl we Po Plug in the adapter and extender in the same room. Wait for about 30 seconds until the extender’s 2.4GHz and 5GHz Wi-Fi LEDs turn on. Mbp 1000 Mb ps s Extender TL-WPA7510 Relocate the extender to the Wi-Fi “dead” zone on the same electrical circuit. Connect your devices to the internet using the default SSID (network name) and password on the Wi-Fi Info Card provided. Note: If the Powerline LED turns red, it means the signal strength is poor. Try another wall outlet. Note: If only one wall outlet is available, plug both devices into a power strip for setup, then relocate to wall outlets before enjoying the internet. le ab C ne t 1 Et he r LAN Router Tips: Want to unify Wi-Fi networks or personalize your network? See the back page for instructions. Attention In te r ne t Plug powerline devices into wall outlets. Do not use power strips after setup. Wall Outlet Power Strip Personalize Your Network Unify Wi-Fi Networks via Wi-Fi Auto-Sync Wi-Fi Auto-Sync enables you to easily create one unified Wi-Fi network throughout your home. Copy SSID and Password from Your Router via WPS Note: If your router doesn’t have a WPS button, manually change the extender’s Wi-Fi settings via the tpPLC app, tpPLC Utility, or web interface. 1. Plug in the extender in the same room as your router. Wait until the extender’s Wi-Fi LEDs turn on. Manage your powerline devices using any of the methods below. You can change the SSID and password, set Wi-Fi schedules, create a guest network and more. Auto-Sync Settings to More Extenders If you have more extenders, simply plug in and pair each one with the existing adapter to join the network. Then the Wi-Fi settings will automatically sync from the existing extender to the new ones. Note: For more extender models that support Wi-Fi Auto-Sync, visit http://www.tp-link.com. 2. Press your router’s WPS button. Within 2 minutes, press the extender’s Wi-Fi button for 1 second. The extender’s Wi-Fi LEDs start blinking. When they stay on, Wi-Fi settings are copied. Network C Network A Blinking Reset Pair LED WPS Wi-Fi Within 2 minutes WAN On Network B Network A DIFFERENT SSID & Password LAN 100 For easy management via your smartphone or tablet, download the app from the App Store or Google Play, or simply scan the QR code. Scan to download Note: If Wi-Fi settings are not copied within 2 minutes, manually change the extender’s Wi-Fi settings. WPS tpPLC App SAME Auto-Sync SSID & Password tpPLC App tpPLC Utility For easy management via your computer, download the utility on the product’s Support page at http://www.tp-link.com. Note: For detailed instructions, refer to the utility manual on the product’s Support page. 0M Wireless Router bps Extender 3. Relocate the extender and enjoy the internet using your router’s SSID and password. Web Interface Network A Network A To access all settings, connect to an extender wirelessly and visit http://tplinkplc.net. Use ‘admin’ for both username and password upon initial login. Note: For detailed instructions, refer to the product manual on the product’s Support page. SAME SSID & Password 1000Mbps Button Legend LED Wi-Fi ©2017 TP-Link 7106507481 REV1.1.0 Pair Reset Extender TL-WPA7510 1000 Mbp s Reset Press for at least 5 seconds until all LEDs turn off to reset the extender to factory default settings. Pair Press for 1 second on two powerline devices within two minutes to pair them. Press for about 8 seconds until the Powerline LED is off to leave the current powerline network. LED Press for 1 second to turn all LEDs on or off. Wi-Fi Press for 1 second to begin or stop copying Wi-Fi settings from the router. Press for about 5 seconds to turn Wi-Fi on or off. If you personalize any extender with LED schedules or other Wi-Fi settings (such as Wi-Fi schedules and guest network), the settings will also automatically sync to other extenders in the same powerline network. Frequently Asked Questions Q1. How do I reset my extender to factory default settings? A. With the extender plugged into an electrical outlet, press and hold the Reset button until all LEDs turn off. When the LEDs turn back on, the reset process is complete. Q2. What should I do if there is no internet connection in my powerline network? A1. Make sure all powerline adapters and extenders are on the same electrical circuit. A2. Make sure the Powerline LEDs pair all devices again. are lit on all of your powerline devices. If they are not, A3. Make sure all devices are correctly and securely connected. A4. Check if you have an internet connection by connecting the computer directly to the modem or router. Q3. What should I do if a successfully-paired extender does not reconnect after it is relocated? A1. Make sure all powerline adapters and extenders are on the same electrical circuit. A2. Try to pair the extender again, and make sure the Powerline LED is on. A3. Check for possible interference due to a washing machine, air conditioner or other household appliance that may be too close to one of the powerline devices. Plug the appliance into the integrated electrical socket to remove the electrical noise if your powerline device has an integrated electrical socket. For technical support and more information, please visit http://www.tp-link.com/support, or simply scan the QR code. TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC and 2011/65/EU. The original EU declaration of conformity may be found at http://www.tp-link.com/en/ce.