Kolf REM40 RF Remote User Manual REM40 FCCID

Download:
Mirror Download [FCC.gov]
Document ID	820079
Application ID	b8XhIM+2xejv9eq06FPqFg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	181.03kB (2262850 bits)
Date Submitted	2007-07-24 00:00:00
Date Available	2007-07-24 00:00:00
Creation Date	2007-07-19 10:26:52
Producing Software	Adobe PDF library 7.77
Document Lastmod	2007-07-19 10:26:53
Document Title	REM40 FCCID
Document Creator	Adobe Illustrator CS2

RF Remote
Model: REM40
Operating Manual
Power connection VOLUME“)
— Connect the receiver wire connector to the \
marine radio connector.
- Connect the receiver power cord (red) to the , w l s
position pole of 12V DC power source, The installed VOLUME 1 .) Sm"
red LED will light on.
1. Encode/decode setting
' . Set the encode switch ofthe transmitter ,7
to the desired combination.
Remove the receiver switch cover.
Press the (learn) button briefly. The Green a
LED will remain on for 5 seconds. ENCODE
Prel any key on thc transmitter (Remote Kcy Pad) SWWH
brielly while the Green LED is illuminated.
e. The Green LED of the reeei r will blink for
few seconds and then turn ott, Encoding is completed.
57
P-
2. Change of code setting
a, Press and hold the (learn) button. Green LED will illuminate, LEARN
b. Release the button aftcr the green LED comes off.
e Repeat procedure (1) to set new coding.
3. To operate the remote switch i
a. Press "Power" to turn on the radio. GREEN >
b Press “Power" again to turn offthe radio. LED
o Press “Mode” to change mode status:
Radio, CD player, SIRIUS or AUX.
e. Press “Mute" to silence the radio’s sound.
f. Press “Tune —“ or “Tune +" to search radio stations.
g. Press "Vol +” or “Vol —" to adjust sound volume,
NOTE:
I'Hli MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV
INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS
EQUIPMENT. SUCII MODIFICATIONS COULD DAMAGE THE EQUIPMENT.
This equipment has been tested and found to comply with the limits for a Class B digital device
following Part 15 ofthe FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. '1 his equipment generates, uses and can radiate radio
frequency energy and, ifnut installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in
a particular installation.
If this equipment does cause harmful interference to radio or television reception. which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference
by one or motc ofthe following mcasutcs:
.. Reorient ur relocate the receiving antenna.
—— Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected,
-- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 ofthc FCC Rules, Operation is subject to the following two conditions:
(I) this device may not cause harmful interference, and (2) mi device must accept any interference
received, including interference that may cause undesired operation.
FCC ID: U9F REM40
MADE IN CHINA
This device complies with part 15 of the FCC
Rules. Operation is subject to the following
two conditions: 11) this device may not cause
JBL harmful interference, and (2) this device must
accept any interference received, including
REM40 interference that may cause undesired
operation.
RED LED
INDICATOR
MoDE
ruNEtrr
POWER
rouse)
MUTE

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Modify, Copy, Annotate, Fill forms, Extract, Print high-res
XMP Toolkit                     : 3.1.1-111
Format                          : application/pdf
Title                           : REM40 FCCID
Creator Tool                    : Adobe Illustrator CS2
Create Date                     : 2007:07:19 10:26:52+08:00
Modify Date                     : 2007:07:19 10:26:53+08:00
Metadata Date                   : 2007:07:19 10:26:53+08:00
Thumbnail Width                 : 160
Thumbnail Height                : 256
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 16691 bytes, use -b option to extract)
Document ID                     : uuid:82D8DB029B35DC11B1A1E41E0249745D
Instance ID                     : uuid:14c2303a-ae38-44fd-bb26-9ce63006dbab
Derived From Instance ID        : uuid:81D8DB029B35DC11B1A1E41E0249745D
Derived From Document ID        : uuid:BCB5CF38E634DC11A8B891917D9E3589
Producer                        : Adobe PDF library 7.77
Page Count                      : 1
Creator Version                 : 12
Container Version               : 9
Creator                         : Adobe Illustrator(R) 12.0
For                             : Sun, KOLF
Bounding Box                    : 73 41 539 798
Image Height                    : 757
Image Width                     : 466
Image Size                      : 466x757
Megapixels                      : 0.353

EXIF Metadata provided by EXIF.tools