Konica Minolta Bizhub C300 Users Manual Scanning Guide V6.0_Colour_V1.2

C451 to the manual e95d78fa-61af-4caa-8ecf-6d53789e60b6

2014-12-13

: Konica-Minolta Konica-Minolta-Bizhub-C300-Users-Manual-124532 konica-minolta-bizhub-c300-users-manual-124532 konica-minolta pdf

Open the PDF directly: View PDF .
Page Count: 45

Download
Open PDF In Browser	View PDF

Scanning Guide for Colour Machines
This guide covers the following machines:

•

C250/C252/C300/C351/C352/C450
- Emperon and Fiery Controllers IC-402 & IC-406

•

C200/C203/C253/C353/C451/C550/C650
- Emperon and Fiery Controller IC-409

•

C350 - Embedded Controller and the Fiery IC-401

•

Bizhub C10

Version 6.0
Colour V1.2

CONTENTS
Page 3

Scanning Tips & Tricks

Phase 3 onward Machines - With the Emperon Controller
C250/C252/C300/C351/C352/C450
Scan to HDD
Scan to E-mail
Scan to FTP
Scan to SMB

Page 4
Page 6
Page 8
Page 9

Phase 3 onward Machines – C450/C351/C300/C352
With the Fiery Controllers IC-402 V2.01 & IC406 V1.01
Scan to HDD
Scan to E-mail
Scan to FTP
Scan to SMB (same as Emperon)

Page 10
Page 12
Page 14
Page 15

C203/C253/C353/C451/C550/C650 with Emperon Controller
Scan to HDD
Scan to E-mail
Scan to FTP
Scan to SMB

Page 16
Page 18
Page 20
Page 21

C253/C353/C451/C550/C650 with the Fiery IC-409
Configuration 1
Configuration 2

Page 22
Page 24

Bizhub C10
Scan to E-mail

Page 25

C350 with the Embedded Controller
Scan to HDD
Scan to E-mail
Scan to FTP

Page 27
Page 29
Page 31

C350 with the Fiery IC-401
Scan to HDD
Scan to E-mail
Scan to FTP

Page 33
Page 35
Page 37

C200 lite
Scan to Email

Page 38

Created by Hotline Support
Konica Minolta Hotline Support (UK)

Scanning – Tips & Tricks
FTP
- PageScope Cabinet and the FTP Utility will not run on Windows 2003 , Vista or Server
2008, use the IIS service within these Operating SystemsPageScope Cabinet needs to be open before scanning, or the FTP Service placed in the
Startup folder of the PC. (see the Konica Minolta FTP & SMB Setup Guide for Windows)

SMB
* - On Windows 2003 Domain Controller Server, you may find that you need to change
the Domain Security Setting
Security Options\Microsoft Network Security\Digitally Sign Communications=(Always)
should be changed to “Disable”
The Server must then be rebooted for the modified policy to take effect
* This should only be changed by the I.T dept of the customer
- Scanning to 1st folder ensure all permissions are set for everyone, scanning to nested
folders no other permissions are required – directory set on copier= eg:
“1stfoldername\scan\*\*” etc - Scanning to a mapped drive – make sure you place a /
before the share name of the folder within that mapped drive. Folder names etc are case
sensitive.

E-mail
- If you are connecting to an Exchange Server, Relay must be enabled for the Konica
Minolta device on the server itself.
- Alternatively a new account needs to be created on the SMTP server, and
‘SMTP Authentication’ needs to be enabled under the ‘E-mail Transmission’
settings on the MFP.
(Please note that ‘SMTP Authentication’ is not available on all machines)
- In order for ANY Fiery print controller to scan to e-mail, an e-mail account needs to be
set up on the e-mail server as if the machine were a new employee.
- Remember to make sure Binary Division is disabled under the E-mail SMTP Settings.

HDD
- If using the PageScope Box Operator or the HDD TWAIN Driver to retrieve scans,
please make sure you are using the correct version for the version of firmware the
machine is running on.
Version 3.1.0.2 Box Operator should be backwardly compatible with all versions of
firmware, but will not be compatible with newer versions.
- Older versions of Box Operator will not connect to newer versions of firmware and need
to be upgraded at the same time as the firmware.
The latest version of Box Operator can be downloaded from our website:
www.konicaminolta.eu
3

Created by Hotline Support
Konica Minolta Hotline Support (UK)

Konica Minolta
C250/C252/C300/C351/C352/C450 with Emperon Controller
SCAN TO HDD
1) Using Internet Explorer, type the IP address of the Konica Minolta machine into
the address bar and press Go
2) Click on ‘Box’ at the top of the screen

3) Click on ‘Create User Box’

Created by Hotline Support
Konica Minolta Hotline Support (UK)

4) Click Next

5) Type in your User Box Number, Name and Password.
6) Click Apply
7) A message saying ‘Completed’ will be displayed. Click OK.
CREATING A ONE TOUCH BUTTON
1) Click on SCAN at the top of the screen
2) Click on New Registration
3) Choose the type of button you wish to create. I.E. User Box
4) Click Next
5) Fill out the details for your box. The Name is the name of the button that will
appear on the machine. The User Box No. must relate to the User Box you
created previously. The Index is the index the button will appear under on the
machine.

Created by Hotline Support
Konica Minolta Hotline Support (UK)

SCAN TO E-MAIL
1) Using Internet Explorer, type the IP address of the Konica Minolta machine into
the address bar and press Go
2) Click on Logout to logout of Public Mode. You will need to confirm you want to
logout.
3) Login to the Admin Mode by typing in the admin code of 12345678
4) Click on the orange Network tab
5) Click on E-mail Setting down the left hand side of the page
6) Click on E-mail TX (SMTP)
7) Ensure that ‘E-mail TX Setting’ and ‘Scan to E-mail’ are turned ‘ON’
8) Enter in the IP address or Host Name of the E-mail server
9) Enter an ‘Admin. Email Address’ & ‘Device Mail Address’. Neither of these
addresses need to be real.
10) If required, turn on ‘SMTP Authentication’ and enter a user name and
password of a user set up on the e-mail server. It is recommended that if you
need to use this setting, that a new e-mail account for the Konica Minolta device
is created on the e-mail server.

11) Binary division by default is turned off. If enabled, the machine will send
separate scanned images. For example, if you scan in a 10 page document, you
may end up receiving 10 separate e-mails or you may received a .dat file.
12) Click Apply and then OK
13) Log out of Administrator mode and confirm that you wish to log out
6

Created by Hotline Support
Konica Minolta Hotline Support (UK)

CREATING A ONE TOUCH BUTTON
1) Following on from the instructions on page 6, log back in as a Public User
2) Click on SCAN at the top of the screen
3) Click on New Registration
4) Choose the type of button you wish to create. I.E. E-mail
5) Click Next
6) Enter in the Name of the button you wish to appear on the machine, the Index
in which it is to appear under, and the E-mail Address you require your e-mails
sending to.

7) Click Apply and it should display the following screen. Click OK

Created by Hotline Support
Konica Minolta Hotline Support (UK)

SCAN TO FTP
For information on configuring either PageScope Cabinet or IIS, please refer to
the Konica Minolta FTP & SMB Setup Guide for Windows.
PageScope Cabinet
IIS – XP
IIS – Vista
IIS – Server 2008

Page 4
Page 5
Page 6
Page 12

1) Using Internet Explorer, type the IP address of the Konica Minolta machine into
the address bar and press Go
2) Click on the ‘Scan’ tab at the top of the screen
3) Click on ‘New Registration’ and then choose ‘FTP’ from the list
4) Enter a ‘Name’ for your one touch button. (This is the name of the button that
will appear on the machine).
* Specify the ‘Index’ under which your one touch button is to appear on
the machine
* Enter the IP address or Host Name of the PC running the FTP service
* If in PageScope Cabinet/IIS you have set the FTP Root Folder to the
actual folder on the PC where you wish the scans to be placed (“PC Root
Folder”), the ‘File Path’ on the machine only needs to have a / (forward
slash) typed into the box. The / means “root folder”. If however you
wants the scans to be placed in a folder which is inside the “PC Root
Folder”, lets say called Hotline you would need to put /Hotline
* Enter a user name or password that is either configured within
PageScope Cabinet, or if you are using IIS, that of a user on the PC

5) Click Apply and OK.
8

Created by Hotline Support
Konica Minolta Hotline Support (UK)

SCAN TO SMB
1) Create and configure shared folder on your C drive as on pages 20-26 of the
Konica Minolta FTP & SMB Setup Guide for Windows.
2) Using Internet Explorer, type the IP address of the Konica Minolta machine into
the address bar and press Go
3) Click on the SCAN tab at the top
4) Click on New Registration and choose SMB
5) Enter in the Name of the button to appear on the machine and select the
Index in which it is to appear under.
6) Type in the IP Address of the computer as the ‘Host Address’. You can also
use the Computer Name found under the Properties of My Computer by putting a
tick in the box ‘Please check to enter host name’. This must be typed in using
upper case.
7) Type in the SHARE NAME of the folder you created in step 1

8) Type in the User Name and Password the customer uses when they log into
their computer first thing in the morning. If this does not work, a new user must
be set up on the PC just for SMB scanning.
9) Click Apply and then OK
9

Created by Hotline Support
Konica Minolta Hotline Support (UK)

Konica Minolta – C300/C351/C352/C450 With the Fiery Controllers
(IC-402 & IC-406)
SCAN TO HDD
1) Using Internet Explorer, type the IP address of the Konica Minolta machine into
the address bar and press Go
2) Click on Login (Fiery) and type in the Administrator password for the Fiery
which is: Fiery.1
3) Click on the ‘Box’ tab at the top of the screen and click ‘Create’

4) Type in the Mailbox Name and password you require for your box. This is
case sensitive. This is the information you will need to type into either Web
Scan or Fiery Remote Scan 5 to retrieve the scanned images. Click Apply

5) Logout of the Fiery Screen

Created by Hotline Support
Konica Minolta Hotline Support (UK)

CREATING A ONE TOUCH BUTTON
1) Click on SCAN at the top of the screen
2) Click on New Registration
3) Choose the type of button you wish to create. I.E. User Box (Scan)/(Store
Scanner)
4) Click Next
5) Enter in the Name of the button you wish to appear on the machine and
the Index which it should appear under. The ‘User Box Name.’ is the name
of the box you created when you logged in to the Fiery screen.

6) Click Apply

Created by Hotline Support
Konica Minolta Hotline Support (UK)

SCAN TO E-MAIL
PLEASE NOTE THAT AN E-MAIL ACCOUNT MUST BE SET UP ON THE E-MAIL
SERVER PRIOR TO SETTING UP THE MACHINE
1) Using Internet Explorer, type the IP address of the Fiery/machine into the address bar
and press Go
2) Click on Fiery Web Tools and the new look Web Tools will be displayed

3) Click on Configure, which will give you a summary of the current settings

Created by Hotline Support
Konica Minolta Hotline Support (UK)

4) Click on ‘Launch Configure’ and you will be prompted for a password. The
password is the same as all new Fiery’s: Fiery.1
5) Click OK
6) Click on Network\Services\E-mail and the following screen will be displayed.
7) Enter in the required details.

8) Click Apply and reboot the Fiery by clicking ‘Reboot’ in the bottom left hand corner
of the screen.
CREATING A ONE TOUCH BUTTON
1) Click on SCAN at the top of the screen
2) Click on New Registration
3) Choose the type of button you wish to create. I.E. E-mail
4) Click Next
5) Enter in the Name of the button you wish to appear on the machine, the Index in
which it is to appear under, and the E-mail Address you require your e-mails sending
to.

Created by Hotline Support
Konica Minolta Hotline Support (UK)

SCAN TO FTP
This setup for FTP scanning is the same as the Emperon controller. Please refer
to Page 22 for machine configuration, and for information on configuring either
PageScope Cabinet or IIS, please refer to the following pages of the Konica
Minolta FTP & SMB Setup Guide for Windows.
PageScope Cabinet
IIS – XP
IIS – Vista
IIS – Server 2008

Page 4
Page 5
Pages 6
Page 12

However, you do need to enable FTP by opening up Web Tools from the web
interface of the machine.
1) Click on Configure then Launch Configuration.
2) Click on Network\Services\Scan and put a tick in the FTP box.
3) Reboot the Fiery by clicking the Reboot button in the bottom left hand corner of
the screen.

Created by Hotline Support
Konica Minolta Hotline Support (UK)

SCAN TO SMB
1) Create a shared folder on your C drive as on pages 20-26 of the Konica
Minolta FTP & SMB Setup Guide for Windows.
2) Using Internet Explorer, type the IP address of the Konica Minolta machine into
the address bar and press Go
3) Click on the SCAN tab at the top
4) Click on New Registration and choose SMB
5) Enter in the Name of the button to appear on the machine and select the
Index in which it is to appear under.
6) Type in the IP Address of the computer as the ‘Host Address’. You can also
use the Computer Name found under the Properties of My Computer by putting a
tick in the box ‘Please check to enter host name’. This must be typed in using
upper case.
7) Type in the SHARE NAME of the folder you created in step 1

Created by Hotline Support
Konica Minolta Hotline Support (UK)

C203/C253/C353/C451/C550/C650 with the Emperon
Controller
SCAN TO HDD
1) Using Internet Explorer, type the IP address of the machine into the
address bar and press Go
2) Click on the ‘Box’ tab at the top of the screen
3) Click on ‘Create User Box’

4) Enter a ‘User Box Name’, ‘Password’ if required and ‘Index’ under which the
machine will place the box.

Created by Hotline Support
Konica Minolta Hotline Support (UK)

5) Click ‘OK’ and ‘OK’ again to the ‘Completed’ message
CREATING A ONE TOUCH BUTTON
1) Click on the ‘Store Address’ tab
2) Click on ‘New Registration’
3) Choose ‘User Box’ from the next screen and click ‘OK’
4) Leave the ‘Use Opening Number’ option selected.
* Give your scan button a name. (This is the name of the button that will
appear on the machine).
* Select the ‘Index’ under which that button is to appear.
* Enter the number for the box you created previously. If you are unsure
what this box number was, click ‘Search from List’. You can then select
the box and click ‘OK’

5) Click ‘OK’ and then ‘OK’ again
Your box is now registered.

Created by Hotline Support
Konica Minolta Hotline Support (UK)

SCAN TO E-MAIL
1) Using Internet Explorer, type the IP address of the Konica Minolta machine into
the address bar and press Go
2) Log in to Administrator Mode using the default password of: 12345678
3) Under the ‘Maintenance’ screen, click on ‘Machine Setting’
4) Enter an ‘Administrator Name’ and ‘Admin E-mail Address’

5) Click ‘OK’ and ‘OK’ again.
6) Click on the ‘Network’ tab at the top of the screen
7) Down the left hand side of the screen, click ‘Email Setting’, then ‘E-mail TX
(SMTP)’

Created by Hotline Support
Konica Minolta Hotline Support (UK)

8) Ensure that ‘E-mail TX Setting’ and ‘Scan to E-mail’ are turned ‘ON’
9) Enter in the IP address or Host Name of the E-mail server
10) Enter a ‘Device Mail Address’
11) If required, turn on ‘SMTP Authentication’ and enter a user name and
password of a user set up on the e-mail server. It is recommended that if you
need to use this setting, that a new e-mail account for the Konica Minolta device
is created on the e-mail server.
12) Ensure that ‘Binary Division’ is turned ‘OFF’
13) Click ‘OK’ and log out of Administrator Mode
CREATING A ONE TOUCH BUTTON
1) Log in to the web interface as a ‘Public User’
2) Click on the ‘Store Address’ tab
3) Click on ‘New Registration’ and choose ‘E-mail’ from the next screen.
4) Enter a ‘Name’ for your button. (This is the name of the button that will
appear on the machine.
* Choose the ‘Index’ under which this button will appear
* Enter the e-mail address of the recipient

5) Click ‘OK’ and then ‘OK’ again
Your button is now configured.
19

Created by Hotline Support
Konica Minolta Hotline Support (UK)

SCAN TO FTP
For information on configuring either PageScope Cabinet or IIS, please refer to
the following pages of the Konica Minolta FTP & SMB Setup Guide for
Windows.
PageScope Cabinet
IIS – XP
IIS – Vista
IIS – Server 2008

Page 4
Page 5
Pages 6
Page 12

1) Using Internet Explorer, type the IP address of the Konica Minolta machine into
the address bar and press Go
2) Click on the ‘Store Address’ tab at the top of the screen
3) Click on ‘New Registration’ and then choose ‘FTP’ from the list
4) Leave the ‘Use Opening Number’ option selected.
* Enter a name for your one touch button. (This is the name of the button
that will appear on the machine).
* Specify the ‘Index’ under which your one touch button is to appear on
the machine
* Enter the IP address or Host Name of the PC running the FTP service
* If in PageScope Cabinet/IIS you have set the FTP Root Folder to the
actual folder on the PC where you wish the scans to be placed (“PC Root
Folder”), the Directory on the machine only needs to have a / (forward
slash) typed into the box. The / means “root folder”. If however you
wants the scans to be placed in a folder which is inside the “PC Root
Folder”, lets say called Hotline you would need to put /Hotline
* Enter a user name or password that is either configured within
PageScope Cabinet, or if you are using IIS, that of a user on the PC.

5) Click ‘OK’ and then ‘OK’ again.
Your button is now configured.
20

Created by Hotline Support
Konica Minolta Hotline Support (UK)

SCAN TO SMB
1) Create a shared folder on your C drive as on pages 20-26 of the Konica
Minolta FTP & SMB Setup Guide for Windows.
2) Using Internet Explorer, type the IP address of the Konica Minolta machine into
the address bar and press Go
3) Click on the ‘Store Address’ tab at the top of the screen
4) Click on ‘New Registration’ and then choose ‘SMB’ from the list
5) Enter in the ‘Name’ of the button to appear on the machine and select the
‘Index’ in which it is to appear under.
6) Type in the IP Address of the computer as the ‘Host Address’. You can also
use the Computer Name (found under the Properties of My Computer) by putting
a tick in the box ‘Please check to enter host name’. This must be typed in using
upper case.
7) Type in the SHARE NAME of the folder you created in step 1

Created by Hotline Support
Konica Minolta Hotline Support (UK)

C253/C353/C451/C550/C650 with the Fiery IC-409
There are 2 ways of configuring the C253/C353/C451/C550/C650 with the
IC-409 attached. Please make sure you check which configuration you have
before you commence setup of scanning.

Configuration 1
Figure 1

Figure 2

* There will be a short black crossover cable connected from the top LAN connection
of the copier (Figure 1), to the COPIER connection on the Fiery (Figure 2).
* The LAN cable for the network will be plugged in to the LAN port on the Fiery.
The machine will have two IP addresses. One for the Fiery and one for the main
body. When browsing the web interface, you need to use the correct IP address for
what you want to browse.
The IP address of the Main Body can be found by printing a Configuration Page from
the Fiery. It cannot be found under the Network Settings on the main body of the
machine. At the machine, follow the steps below:
1)
2)
3)
4)

Press
Press
Press
Press

the Utility\Counter button
Controller Details on the touch screen
Menu
the button next to Print Pages and then the button next to Configuration

Created by Hotline Support
Konica Minolta Hotline Support (UK)

The machine will then print 2 pages. The IP address of the machine can be found at
the end of the second page.
Scan to E-mail
With this configuration, the machine will first look to the main body for scan settings.
If the main body of the machine and the Fiery both have SMTP settings entered, the
machine will send e-mails from the main body. If only the Fiery is configured, the
Fiery will send the e-mail instead.
Scan to HDD/FTP/SMB - these are all handled by the Emperon controller.
Please refer to the relevant pages - HDD 16-17, FTP 20 & SMB 21 for
details.
Scan to E-mail through the Emperon controller, please refer to pages 18 - 19
Scan to E-mail through the Fiery IC-409 – please refer to pages 12 - 13 for
configuration
CREATING A ONE TOUCH BUTTON
1) Log in to the web interface as a ‘Public User’
2) Click on the ‘Store Address’ tab
3) Click on ‘New Registration’ and choose ‘E-mail’ from the next screen.
4) Enter a ‘Name’ for your button. (This is the name of the button that will appear on
the machine.
* Choose the ‘Index’ under which this button will appear
* Enter the e-mail address of the recipient

5) Click ‘OK’ and then ‘OK’ again
Your button is now configured.
23

Created by Hotline Support
Konica Minolta Hotline Support (UK)

Configuration 2

Figure 1

Figure 2

Figure 1: A network cable must be plugged into the main body LAN port
Figure 2: A network cable must be plugged into the LAN port on the Fiery
The machine now has two IP addresses. One for the Fiery, one for the main body.
When browsing the web interface, you need to use the correct IP address for what
you want to browse.

All scanning is handled by the main body only.
Please refer to pages 16 - 21.
--When connecting via supplied crossover cable-If the Fiery is assigned an IP from the LAN, which has addresses above then the Fiery
will assign the Copier Engine with an IP above the one it has been given from the LAN,
This is a Psudo address and will not affect the LAN side of the Fiery.
eg: Fiery=192.168.0.100, Copier Engine=192.168.0.101.
(It is still advisable not to use two IP addresses either side of the one allocated to the
Fiery)
From the Copier main Body it will show an IP in the 172.?.?.? range which will be the
Copiers’ true IP address as given by the DHCP function of the Fiery.
ALL of the Emperon functions are available via the Psudo IP address

Created by Hotline Support
Konica Minolta Hotline Support (UK)

Bizhub C10
Scan to E-mail
1) Using Internet Explorer, type the IP address of the Konica Minolta machine into the
address bar and press Go
2) Login to the web interface using the password of: MagiMFP
3) Click on the yelllow Network tab at the top of the screen and down the left hand
side, select ‘Email’.

4) * Make sure that ‘Send’ is enabled.
* Enter in a Sender Name
* Enter in an E-mail address (this does not have to be a real address but it is what
will appear in your Inbox)
* Enter a Default Subject
* Enter the IP address of the e-mail server in to ‘SMTP Server Address’
* If the e-mail server requires authentication, enable the Authentication settings
and enter the details provided by your Network Administrator.
5) When all of these details have been entered, click ‘Apply’.
You now need to create a Speed Dial button for all users that require scan to e-mail.
Please continue to the next page for instructions.

Created by Hotline Support
Konica Minolta Hotline Support (UK)

TO CREATE A SPEED DIAL BUTTON
1) Following on from the instructions on page 25
2) Click on the Fax\E-mail tab at the top of the screen
3) On the left of the screen, click on Speed Dial Setting
4) Click on the Speed Dial number you wish to register. This can range from 001
to 100.
5) Choose E-mail from the drop down list and click ‘Apply’
6) On the next screen that appears, enter in a ‘Destination Name’ (this is the
name of the user) and a ‘Destination Address’ (this is the users e-mail address)
7) Click ‘Apply’ and log out of Admin Mode

You Speed Dial button is now configured and ready for use.

Created by Hotline Support
Konica Minolta Hotline Support (UK)

C350 with the Embedded Controller
SCAN TO HDD – remember to permit the Box Function under Utility - Admin Mode
- 2/4

1) Using Internet Explorer, type the IP address of the Konica Minolta machine into
the address bar and press Go
2) Click on File at the top of the screen and then Create

3) Enter a User Box Name and Password. Remember that this is case sensitive
and the User Box Name must be entered in CAPITAL LETTERS. These will be the
details you will use to retrieve you scans through the web interface or the Box
Utility.

4) Click Create
5) Click on Scan at the top of the page
6) Click on Index 1
27

Created by Hotline Support
Konica Minolta Hotline Support (UK)

7) Click on the first set of available 3 dots under Index 1, Sub-Index, Index 1-1

(You can rename the Index’s by typing a new name into the box and clicking Apply)
8) Choose File (Scan to HDD) and click Next
9) Fill in the Destination Name button (this is the name of the button you wish to
appear on the machine), the User Box (drop this box down and choose the User
Box you created earlier), and give the box a password.

10) Click Apply

Created by Hotline Support
Konica Minolta Hotline Support (UK)

SCAN TO E-MAIL
1) Using Internet Explorer, type the IP address of the machine into the
address bar and press Go
2) Log in the Administrator Mode by typing the Administrator’s Code of eight
zeros in to the Log-in box. Click Log-in with your mouse
3) Click on Network at the top and then E-mail/Internet Fax – Send

4) Enter the IP address of the SMTP server and click Apply
5) Click on Scan at the top of the screen
6) Enter a Device Name and E-Mail Address (From). The e-mail address does not
have to be a real e-mail address.

Created by Hotline Support
Konica Minolta Hotline Support (UK)

7) Log-out
CREATING A ONE TOUCH BUTTON
1) Click on SCAN at the top of the screen
2) Click on the first set of available 3 dots under one of the Indexes
3) Choose the type of button you wish to create. I.E. E-mail
4) Click Next
5) Enter in the Name of the button that will appear on the machine and the
e-mail address of the user

Created by Hotline Support
Konica Minolta Hotline Support (UK)

SCAN TO FTP
1) Using Internet Explorer, type the IP address of the Konica Minolta machine into
the address bar and press Go
2) Login to the web page by entering the Administrator Code of eight zeros. Click
on Login with your mouse.
3) Click on Network and then FTP Server/FTP Server Registration

4) Click on one of the 5 sets of three dots. Enter in the details of the PC which is
running the FTP service. For information on configuring either PageScope Cabinet
or IIS, please refer to the following pages of the Konica Minolta FTP & SMB
Setup Guide for Windows.
PageScope Cabinet
IIS – XP
IIS – Vista
IIS – Server 2008

Page 4
Page 5
Pages 6
Page 12

Created by Hotline Support
Konica Minolta Hotline Support (UK)

CREATING A ONE TOUCH BUTTON
1) Click on SCAN at the top of the screen
2) Click on the first available set of 3 dots under one of the Indexes
3) Choose the type of button you wish to create. I.E. FTP (Scan to FTP
Server)
4) Click Next
5) Enter in the Name of the button that will appear on the machine, and then
choose the registered server you created previously from the drop down list
and then click Apply.

Created by Hotline Support
Konica Minolta Hotline Support (UK)

C350 with the Fiery IC-401
SCAN TO HDD
1) Using Internet Explorer, type the IP address of the machine into the
address bar and press Go
2) Enter the Admin Password of four zeros in and click on with your mouse
3) Click on File at the top of the screen

4) Click on Create
5) Type in a Mailbox Name and a password
6) Click Apply

Created by Hotline Support
Konica Minolta Hotline Support (UK)

7) Logout
8) Click on the Scan tab at the top of the screen
9) Click on Index 1 and rename it to HDD and click Apply
10) Click on the first set of available 3 dots and choose Scan to Mailbox as the
destination
11) Type the Name of the button that you wish to appear on the machine and
the mailbox details they require.

12) Click Create

Created by Hotline Support
Konica Minolta Hotline Support (UK)

SCAN TO E-MAIL ***PLEASE NOTE*** In order for ANY Fiery print
controller to scan to e-mail, an e-mail account needs to be set up on the e-mail
server as if the machine were a new employee. These details must then be input
into the Fiery as below
1) Using Internet Explorer, type the IP address of the machine into the
address bar and press Go
2) Click on the Fiery WebTools link

3) Login into the Fiery as an Administrator using the password: Fiery.1
4) Click on Web Setup

Created by Hotline Support
Konica Minolta Hotline Support (UK)

5) Click on Network Setup

6) Click on ‘Service 3’ at the top of the page and enter in the details of the
customers e-mail server.

CREATING A ONE TOUCH BUTTON
1) Click on SCAN at the top of the screen
2) Click on the first set of available 3 dots under one of the Indexes
3) Choose the type of button you wish to create. I.E. Scan to E-mail
4) Click Next
5) Enter in the Name of the button that will appear on the machine and the
e-mail address of the user
36

Created by Hotline Support
Konica Minolta Hotline Support (UK)

Page 4
Page 5
Pages 6
Page 12

1) Using Internet Explorer, type the IP address of the Konica Minolta machine into
the address bar and press Go
2) Click on the SCAN tab at the top
3) Under one of the Indexes click on the first set of available 3 dots
4) Choose Scan to FTP and click Next
5) The Destination Name is as you want the button to appear on the machine
6) The Host Address is the IP address of the PC with Pagescope Cabinet installed
7) The User Name and Password is what has been set up under either PageScope
Cabinet or IIS.
If in Pagescope Cabinet/IIS you have set the FTP Root Folder to the actual folder
on the PC where you wish the scans to be placed (“PC Root Folder”), the
Directory on the machine only needs to have a / (forward slash) typed into the
box. The / means “root folder”. If however you wants the scans to be placed in
a folder which is inside the “PC Root Folder”, lets say called Hotline you would
need to put /Hotline

8) Click Create
37

Created by Hotline Support
Konica Minolta Hotline Support (UK)

Bizhub C200 lite
SCAN TO E-MAIL
These Settings can only be configured at the Machine.
1. Press “Utility/Counter”
2. Press “Admin”

3. Enter Admin Code, Default =12345678

4. Scroll to Screen 2/2 and Press “Network Settings”

Created by Hotline Support
Konica Minolta Hotline Support (UK)

5. Press “SMTP TX Settings”

6. Press “SMTP Server Address” enter your email server IP address. Note: if your
machine does not show the Screen as below and the Network uses Authentication
please contact your Service Centre.
7. Press “E-Mail Address” and enter an email address for the copier

8. Press all buttons marked “OK” and “Close” until back to main screen. Note: You may
need to restart the copier from the mains power socket.
Steps 4-6 above will require knowledge of your Network
NB: The document(s) must be inserted into the ADF head first (landscape) in order for
them to be the correct orientation for the recipient
Document(s) will be sent as PDF format as factory default, and can be changed within the
user Settings, please refer to the manual.

Created by Hotline Support
Konica Minolta Hotline Support (UK)

Adding E-Mail Addresses via the Copier Panel
1. Press Utility/Counter

2. Press “One-Touch/Box Reg”

3. Press “One-Touch”

Created by Hotline Support
Konica Minolta Hotline Support (UK)

4. Select first available empty box and press “OK”(to rename Tabs refer to manual)

5. Type a name for the button and Press “Next”

6. Select “PC” and “E-Mail” and Press “Next”

Created by Hotline Support
Konica Minolta Hotline Support (UK)

7. Type the recipient’s Email address and Press “Next”

8. Confirmation Screen as shown below appears and if all correct press “OK”

9. Screen appears showing newly created one-touch button. Press “OK/Close” until
back to main screen.

Created by Hotline Support
Konica Minolta Hotline Support (UK)

Selecting Address when sending
1. Press “Fax/Scan”

2. Place documents in feeder and press recipient one-touch button then press the
copier start button.

Created by Hotline Support
Konica Minolta Hotline Support (UK)

Adding E-mail Addresses via the Web Interface
In your Web Browser Address Bar Type the Copier’s Network IP Address;
Eg:10.120.3.20
The Copiers Web Interface will then be displayed if your Browser is configure to connect
via a proxy server you may have problems connecting in this instance consult your IT
dept.
By typing in the “Register Index” Box and clicking “Apply” you can assign meaningful
names to the copier address index as shown
1. Click on any available or existing index (eg:#000) to add new recipient Email Address,
or on the 3 bars in an adjacent box under Index to open a new panel

2. Then Select “TX:PC (E-mail)”, click “Next”

Created by Hotline Support
Konica Minolta Hotline Support (UK)

3. Type the name and email address of the recipient and click “Apply” then “OK”

You have now completed the creation of a new Email recipient; repeat the above steps to
add more recipients.

Created by Hotline Support
Konica Minolta Hotline Support (UK)

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
XMP Toolkit                     : 3.1-702
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2008:10:21 13:44:40+01:00
Create Date                     : 2008:10:21 13:39:35+01:00
Metadata Date                   : 2008:10:21 13:44:40+01:00
Format                          : application/pdf
Title                           : Microsoft Word - Konica Minolta Scanning Guide V6.0_Colour_V1.2.doc
Creator                         : UK013206
Document ID                     : uuid:714f6f6f-62c3-4615-a4bf-39e4461489e6
Instance ID                     : uuid:8e8a3c31-033d-43a5-ae66-acb18c6fd1ce
Page Count                      : 45
Author                          : UK013206

EXIF Metadata provided by EXIF.tools

Konica Minolta Bizhub C300 Users Manual Scanning Guide V6.0_Colour_V1.2

C451 to the manual e95d78fa-61af-4caa-8ecf-6d53789e60b6

Navigation menu

Versions of this User Manual:

Views

Navigation