Korea Creadic Life ADPOP SIGN PAD User Manual ADPP Manual hwp
Korea Creadic Life Co., Ltd. SIGN PAD ADPP Manual hwp
Contents
- 1. Users Manual
- 2. User Manual
Users Manual
User’s Manual Rev.1.0 AD-POP wireless http://www.kcladpop.com/ Table of Contents 1. Introduction 1.1. Outline 1.2. Operating Precautions 2. Installation & usage 2.1. ADPOP & Accessories 2.2. ADPOP Features 2.3. Dimensions 2.4. Power supply 2.5. LCD display 2.6. Self Test 2.6.1Test of Card Reading Function 3. Service Center Information 1. Introduction 1.1. outline The ADPOP is terminal equipment for serving the ideal payment solution by NFC, WiFi, QR code, advertisement, mobile coupon and points. Mobile banking system, Retail, point of sales, other industrial area are required to this terminal equipment. The general features of ADPOP are as follows: 1.2. Operating Precautions Please follow the precautions below to enjoy and maintain the full performance of the terminal equipment. 1.2.1 Using the ADPOP ● Be careful not to drop or bump the ADPOP on a hard surface. ● Do not install the ADPOP in direct sunlight or such areas. Suitable environment for the use of the equipment is as follows: Operating temperature :-10°C to 50°C Relative humidity : 15% to 80% ● Do not install the ADPOP near devices that generate strong electromagnetic fields such as a copy machine. ● Do not disassemble the product and do not use alcohol, thinner or benzene to clean the surface of the product. ● Switch the POWER OFF when not in use. ● Please do not use the product when driving or walking in a street, otherwise it may cause a car accident. ● To avoid dropping or strong impact to the product, do not let the ADPOP be shaken violently, otherwise, it may cause damage to the screen or display incorrectly. 2. Insstallatio on & ussage 2.1. ADPOP & Accessories Your AD DPOP box should include these items. If an ny items are e damaged or missing g, please contact you ur dealer fo or assistancce. ADPOP Battery y charger adaptor User’s Manual 2.2. ADPOP Features ▶ Part Name TFT-LCD Touch Screen 7 inch / Digital RFID/NFC Signature PAD Card Reader Camera Ethernet USB to Serial Power Connection WiFi module 2.3. D Dimensio ons 2.4 Po ower sup pply P is the pro oduct thatt battery iss incorpora ated in rear part of p product, th herefore ADPOP users can c separatte battery from rear part. If the performanc ce of batte ery will be slow down or not working, please conta act with A/S Center. For recharging the e battery pa ack, insertt the Battery Charge er to the charge conne ector of the ADPOP. NOTE : ● The battery is consumable e parts and d when purcchasing, co ompared to the use ho our is grad dually decre eases. (Warrranty 6 month) ● If the ADPOP iss not used for a long time, unplu ug the pow wer cord fro om the ADP POP and outlet. ● The recharging time depe ends on the e voltage le evel and am mbient temp perature off the batte ery. Normally, if takes about 3 to o 4 hours to o recharge a battery p pack. ● You must use only the supplied adap pter. 2.5 LCD display 2.5.1 LCD display Power Display status of POWER On OR Off . if LCD flick on and off, need to be charged. Link Display status of connection with other device. Card If Display is On, NFC card reading is available. Sign If Display is On, signing available 2.5.2 Button [Light] Display Light setting [Volume] Volume setting Credit Choose Credit Company for payment Company setting 2.6 Self Test 2.6.1 Test of Card Reading Function In pressing button Card selection and Turn on the power, it will be converted to test acceptability of card processing. After card reading, the result of test will be printed. 3. Service Center Information Korea Creadic Life Co., Ltd. Address : 3rd floor, Kolon building, 9-1, Dangsandong 1-ga, Yeongdeungpogu, Seoul, Korea 150-800 Tel : 82-2-2676-4238 FCC Information to User This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is con-nected. • Consult the dealer or an experienced radio/TV technician for help. Caution Modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC Compliance Information : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation IMPORTANT NOTE: FCC RF Radiation Exposure Statement: This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. IMPORTANT Safety Instruction: 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this equipment near water. 6) Do not using near any heat sources such as radiators, heat resisters, stove, or other equipment that produce heat.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No XMP Toolkit : 3.1-702 Producer : Acrobat Distiller 9.4.0 (Windows) Creator Tool : PScript5.dll Version 5.2.2 Modify Date : 2012:09:21 17:39:45+09:00 Create Date : 2012:08:13 16:56:20+09:00 Metadata Date : 2012:09:21 17:39:45+09:00 Format : application/pdf Title : ADPP Manual-영문.hwp Creator :EXIF Metadata provided by EXIF.toolsDocument ID : uuid:3b61587f-a441-4398-b8c8-d104c80ba6d6 Instance ID : uuid:9d9ca495-1785-470c-a2f0-c8d584eb901b Has XFA : No Page Count : 14 Author :