Korea Data Systems Co KD-1731T User Manual 33759
Korea Data Systems Co Ltd 33759
8
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 33759 |
| Application ID | HYGQLqQHYWkVFLW4+S/Zng== |
| Document Description | 8 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 28.23kB (352894 bits) |
| Date Submitted | 1999-04-22 00:00:00 |
| Date Available | 1999-04-22 00:00:00 |
| Creation Date | 2001-06-28 11:32:34 |
| Producing Software | Acrobat Distiller 4.0 for Windows |
| Document Lastmod | 2001-06-28 11:32:37 |
| Document Title | 33759.pdf |
| Document Author: | jsoscia |
APPENDIX D:
USER’S MANUAL
«am?» “ff-m ‘asfiamsm.
~ -:v:~r:A- - < f-«m t‘t‘bifi: they»vnufifwmfi-MWM ‘
MODEL N0. : KD-1731 T
17” Multi-Scan Color Monitor
(16‘0”diag, Viewing area)
L?= WHY asv, an
~mummm mama.- .sWQTAm$-2—‘M'WW ; u;
A Afiwfiifw» -- wfiw :
[ABLE OF CONIENTS
lNTRODUCTXON
FCC Compliance Sia‘fime
Safety instructions
Gefleraw mformazior‘.
Monitor Features ..
Ecuioment Checku
GETTING STARTED
Qulck SetvUp
F'mt Contro‘ Pane
Cfi-Screen Display .
0) on!»
ON-SCREEN CONTROLS
Menu Descriptmns
REFERENCE
Tlmmg Gulde «
Specwflcauons
STANDARD NEW PRODUCT WARRANTY
REGISTRATION CARD
3 .. afoul-1561.14 . it; ow mmmwnw mmmwmmammm
, was ‘*MW.%£§FWWK »
1!"
FCC COMPLIANCE S ATEMENT
f". has been tested and found to comply with the limits
digital dewce, aursuant 50 Part 15 of FCC Rules. These
“e 20 prow ce reasonaaie crotection against harmful
i. ten’erence :n a residential installation. Triis equipment generates,
uses. and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions. may cause harmful
interference to radio commurications, However, there is no guarantee
that interference Will not occur in a particular installation. if this
equipment does cause harmful interference to radio or television
reception. which can be determined by turning the equipment off and
on. the user is encouraged to try to correct the interference by one or
more of the followmg measures:
. Reorient or relocate the receiving antenna.
- increase the separation between the equipment and receiver,
- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
- Consult the dealer or an experienced radio/television
technician for help.
Notice 11
The changes or modifications not expressly aoproved by the party
responsible for compliance could void the user‘s authority to operate
the equipment.
Notice 2:
Shielded interface cables. if any. must be used in order to comply with
the emission limits.
DOC CLASS 8 NOTICE
This digital apparatus does not exceed Class B limits for radio noise
emission for a digital apparatus as set out in the Radio interference
. eguiations o‘ the Canadiar‘ Departrii ": o" Communications.
LAFEIY INSIRUCiIONS
u.
10
ese instructcns. Save these instructions for !a:er use
‘ors marker: Ol” toe orccuct.
aafmrgs ahc ms:
L‘npiug tnis product from me wall outlet before cleaning. Do not
use liquid cleaners or aerosol cleaners. Use a damp cloth for
cleaning.
Do not use this product near water,
Do not place this product on an unstable cart. stand, or table. The
product may fall, causing serious damage to the product.
Slots and openings in the cabinet and the back or bottom are
provided for ventilation:to ensure reliable operation of the product
are to protect it from overheating, these openings must not be
blocked or covered. The openings should never be blocked by
placing the product on a bed, sofa, rug. or other similar suifacet
This product should never be placed near or over a radiator or heat
register, or in a built in installation unless proper ventilation is
DiOVided.
This product should be operated from the type of power indicated
on the marking label. If you are not sure of the type of power
available, consult your dealer or local power company.
Do not allow anything to rest on the power cord. Do not locate
this product where persons will walk on the cord.
if an extension cord is used with this product. make sure that the
total of the ampere ratings on the products plugged into the
extension cord does not exceed the extensnon cord ampere rating.
also Make sure that the total of all products plugged into the wall
outlet does not exceed 15 amoeres,
Neve' push objects of any k:hd into this product through cabinet
siczs as they may touch dangerous voltage pomts or short out
parts that could result in a risk of fire or electric shock. Never
spill liquid of any kind on the product.
iii
«h We“ wmwres’wwam;whsgw.
”M.mu M ,_ 0.4,
‘fin‘e s we»);
fWL-Mfi‘iflflw
, at» . -,
SAFETY INSiRUCiIONS
men)? . -,
11. Do not attempt to service this product yourself. as opening or
removing covers may ecpose you to cangerccs voltage oomzs :'
o:"er risks. Refer all sew cicg io sewce personnel
12.
13.
14.
Unplug this product from the wall outlet and refer sewlcmg to
qualified service personnel under the following conditions:
a.
b,
c.
d.
When the power cord or plug is damaged or lrayed.
if liquid has been spilled into the produc:.
If the product has been exposed to rain or waterr
If the product does not operate normally when the operating
instructions are followed. Adjust only these controls that are
covered by the operating instructions since improper adyusb
ment of other controls may result in damage and Win often
require extensive work by a qualified technician to restore the
product to normal operation.
If the product has been dropped or the cabinet has been
damaged
Use only the proper type of power supply cord set (provided in
your manual accessories box) for this units It should be a
detachable typezuL listed/GSA certified, type SVT/SJT, rated as
10A 125V minimum, VDE approved or its equivalent.
The Socket-Outlet is to be installed near the equipment and is
easily accessible,
This product is manufactured in accordance with Quality assurance ;
i system approved by 180 9001 certification process.
iv
“vi —. ‘.'Artv','"‘
GENERAL INFORMATION
Congratulations on selecting this high resolution multiscan color
~or ' '.
is mgr performance Clsolay contains the latest technology of flat
screen cesign 2rd microprocessor control. This monitor has been
equipped With both automatic and manual adjustments.
The automatic controls are factory preset and feature automatic
factory frequency scanning.
The manual controls feature use digital aoiustments to personalize
l‘e display in various applications.
The ergonomic characteristics of the antiglare flat screen, high
refresh rates, and tilt swivel base allow comfortable usage when
operating for a long period of time ll’l high resolutions.
This operating manual describes the functions and features in more
jetail so that you may obtain the maximum performance of your
honitor.
MONIIOR FEAlURES
- Multiscanning at horizontal frequenCies of 3OKHz to YOKHz,
vertical frequencies of 50Hz to 3.4th
. 17 inch(16" viewable) Sony Trinitron’ picture tube
' 0.25mm aperture grille pitch
0 Microprocessorcased design with digital controls
~ Windows' 95 St 98 plug and playlVESA' DDC28/DDC2B+/DDCZBi)
~ 11 Preset modes
- Overscan capability for increased viewable area
- Contoatible WlU‘. standard lBM VGA. extended VGAi Super VGA,
IBM XGA. XGA/E, as well as all VESA‘ ergonomic standards
- Compatible With Apple’ Macintoshm
- Universal power supply
- [MPR lll compliant (T0092) iiCOQS)
- VESA” Display Power Management SignalinngMS’“) compatible
-»‘v;—',
, \
a“? my ,,
EQUIPMENT CHECKLIST
Determine the most convenient iocation for your manner.
Make sure that you have enough room to install cables and
connect the ."".ON(O(10 the system unit and power supply
Open the shipping carton and check the contents of the package
The package shouid Include the foilowing items:
“ 17" Color Monitor
’ AC Power Cord
* Owner's Manual
Nore : If any uem(s) are missmg or damaged, contact your dealer
immediateiy.
2 Remove the monitor from its shipping canon(see figure 1).
Save the carton and Dackaging materials in case you need to
reiccate the monitor.
QUICK stil'up
Setting up your monitor is easy. All you have to do is make a
few Simple connections and adjustments. The procedure is as
follows:
1. Start up
Switch the power off to both your monitor and computer. The
location of the power swttcn is on the lower right hand corner
of the monitor:
2. Power cable Connection.
Connect the female end of the power cable to the power
input on the back of the monitore Next. plug the male cable to
the wall outlet for power.
To power input of monitor.
To AC outlet
To PC inlet
More 2
3. Signal cable connection
Connect the 15 pin signal cable to the your computer.
Lock ooth screws to ensure grounding.
PiN NO DESCRIPTION PIN NO DESCRIPTlON
’—“——~’fi 1 1 Video rec l 9. N. C
A l.“ °‘°1°’°‘95.J 2 v ceo ree' 10, Emma
k“ \°é?鑧'>?c’>96y“ c ' 3 V‘oeo oiue . 11 Ground
—/ A N C ‘ i2 SDA
D 1- ‘ ‘ 5 DDC Fleur ‘ T3. HorASvoc
WW QPIY‘ connector ‘ o Viceo rec C’Oufic l 14 Ver-S nc
F5“: 7 Video reeo crounc 15 SCL
8 Video blue crouno
to
Power ON
Switch ON the power to both your color monitor and computer.
Adjusting the Picture
Adjust the controls. if necessary. to get the best picture.
A description of the functions of the controls may be found in
the next section.
Adjusting the Tilt~Swive| Base
The t||t~swivel base can be adjusted for your maximum
vlewmg comfort, it can be adjusted through angles of 90'
horizontally and 15‘ vertically,
so.
F Que a
Note:
Due to the sensitivity of this monitor to earth‘s magnetic
field, you may experience minor irregularities in the display if
you swivel the monitor through more than 90" while the
monitor is ON. If such behavior occurs. please turn the monitor
OFF ano ON again. The display should retUrn to normal.
7. Setup of the Video Circuitry
To use the full potential of this product, it is necessary to
first set the Video circuitry of the computer according to the
maximum capabilities of this monitor.
This can be expressed in any of the following ways:
-1280X1024 GOHZ
-1024>< 768 BSHZ
- BOOX 600 lOOHZ
640x 480 lOOHZ
iRONT CONTROL PANEL
here are a few switches that are located on your monitor.
'he power indicator and adlustable controls allows the user to
naximize the display for individual preferences.
'he description of these functions are as follows :
rrmt Control Panel
DIGlTAL CONTFOL PANEL 7 7 POWER ON/DFF SWITCH
PMR INDICATOR
1. Power ON/OFF Switch
Press the button to turn the power ON or OFF. There will be
a short delay before the display appears.
2, Power lndicalor
This power indicator illuminates when the power is switched ON
and the power cord is properly attached.
MODE ON 1 STANDBY l SUSPEND 1 OFF l
Pcwerlncicator‘l Green 1 Amber 1 infiwggfig L Gfirémlfcri
UN-SEREEN DlSPLAY
DIGITAL CONTROL PANEL
The digital control panel is located at the bottom of your color monitor.
if you are not satisfied with the factory settings, use these controls to
program those you prefer in each resoiution.
Then, these adjusted settings are kept in memory even if you change
resolution or turn off the monitor.
C®®®
from control panel
1.Enter @
This button will enable the On Screen Display(OSD~instructions
for using the 050 are described in the following section).
This button is also used to select the function in the Main Menu
or to save the setting in the Sub Menu.
2.Exit/ Degauss (8
This button manually degausses the CRT It may be used if the
display becomes discolored or washed out in appearance. This
button can also be used to exit from the OSD.
3.Up 6
Use this button to move down the OSD selection menu and
adjust the attribute of the monitor while in 050 mode. Pressing this
button out of the OSD menu allows you to increase the level of
contrast of the display screen.
4. Down 9
Use this button to move up the OSD selection menu and adjust the
attribute of the monitor while in OSD mode. Pressing this button out
of the OSD menu allows you to decrease the level of contrast of
the display screen.
lENU DESCRIFIIONS
ON SCREEN CONTROL ON SCREEN CONTROL
wmmsr
69/6 : SELECT
O : ENTER
ID
Ell
§
1024 x 1su@ 75 n:
seamen?)
Press sTo Exit
Menu Descriptions
CONTRAST O
Adjusts the black level of the display.
amen'mess {©1-
Adjusts the luminosity level of the display.
H - POSITION(HORIZONTAL POSITION) E
Select this control and then use the - and + buttons to center the image
horizontally on the screen.
H ~ SIZE(HORIZONTAL SIZE) E
Select this control and then use the - and + buttons to expand or
decrease the image math to horlzontally fill the sateen.
V-POSITIONWERTICAL POSITION) 8
Select this control and then use the - and + buttons to center the image
vertically on the screen.
V-SIZEWERTICAL SIZE) CD
Select thls control and then use the - and + buttons to adjust the image
height to vertically fill the screen.
SIDE - PIN(PINCUSHION) [m
Select this control‘ then use the A and + buttons to strelghten the sndes
of the image by pulling them ln opposing d‘lrections.
pm BALANCE
Select this control, then use the - and + buttons to straighten the sides of the
image by pulling them in the corresponding direction.
CORNER PIN
Select this control, then use the - and + buttons to straighten the top and
ENTER bottom oomers of the image by pulling them in opposing directions.
TRAPEZDID
Select this control. then use the - and + buttons to even the widths of the top
and bottom of the display (pulling me sides in opposite directions).
PARALLELOGRAM E]
Select this control, then use the - and +buttons to center the top and bottom
of me display (pulling the sides in the corresponding direction).
MOIRE @
Select this control, then press the + and - buttons to be disappeared the moire.
ROTATION
Use the - and + buttons to rotate the image until me sides of the image
are parallel to the edge of the bezel.
COLOR CONTROL(TEMPERATURE)
Select this control, then use the 4 and + buttons to scroll to the desired
color temperature. Use the ENTER button to select either the 9300K,
GSOOK or SSOOK or USER, for a custom setting.
COLOR CONTROL
q'cntons 1 Cows! :
come a Catch A
9mm
— _: 7Ma
—: sai-
—: 597.
6/6: sneer
9: ENTER
9: semen
R - cmmasm {E
Select "COLOR 4: USER" then use the ENTER button to scroll up and
down the RGB menu to R (Red). Use the - and + buttons to adjust the red
level of the display.
communism @
Select “COLOR 4: USER" then use the ENTER button to scroll up and
down the RGB menu to G (Green). Use the - and + buttons to adjust the
green level of the display.
MA!N(BLUE).
Select ”color 4: USER” then use the ENTER button to scroll up and down
the RGB menu to B (Blue). Use the - and + buttons to adjust the blue
level of the display,
LANGUAGE 9
Select this control, then use the + and - buttons to choose from : English,
German(deutsch). Spanish(espafiol), ltalian(italianb) or Frenchmancais)
osn posmou
Select this control. then use the ENTER button to select in which
direction to move the OSD menu. Use the - and + buttons to move the
menu.
RECALL 0
Resets the display settings to the original factory reset values. Press and
hold down the Enter button until the progress bar disappears.
TIMING GUIDE
The 17" color monitor is a multifrequency monitor. it operates at
horizontal frequencies between 30 KHz and 70 KHz, vertical frequencies
between 50 Hz and 140 Hz. Because of its microprocessor-based
design, it offers auto-synchronization and auto-sizing capabilities
This monitor offers 11 ore-programmed settings as listed in the table
below.
TABLE
Preset Resolution Frequency
Horizontal l Vertical Horizontal l Vertical
M1 720 400 315 KHZ 70 Hz
VGA M2 540 480 i 31.5 KHz 60 Hz
l M3 640 _ 430 1] 375 KHZ 75 Hz
l M4 800 500 45.9 KHz 75 Hz
VESA M5 1024 l 768 i 60.0 KHz ‘ 75 Hz
1 M6 1152 l 864 l 67.5 KHz 75 Hz
_ _‘_M7 1280 . 1024 us 9 KHz 60 Hz
VESA MB 540 480 a 43.3 KHz 85 Hz
(mm!— M9 800 600 i 53.7 KHz 35 Hz
W0 M104 1024 768 1 68.7 KHz as Hz
,MAC M11 832 624 i 49.7 KHz 75 Hz
. in addition to 11 factory modest there are 20 additional user modes.
l! more than 20 modes are innutaec. it Will be overrided in accordance with saving
order of additional modes.
- In case of using Macintosh, you must need Mac adapter
10
iPEClFlCATIONS
Picture tube
Resolution
17" ll 6.0" viewable) nonglare. anti-static,
, dark Sony Trintron® tube with tinted aperture
1 grill and 90° deflection
Aperture Grille Pitch 0.25mm
1280lH) >< 1024Nl
Non-interlaced (addressable)
Maxrmum Dot Clock
108MH1
Video input Analog, positive going
signal(0.7V p—p)
—f
Horizontal input l'l‘L, positive or negative
going pulset2.4~5V p—p)
4— —\
Vertical input
TTL, positive or negative
going pulselZA-EV p-p)
Scan frequency
’ Horizontal: 30~110KHz
Vertical: 50~140Hz
Standard display area
300mm(Hl x 225mle1/
llvB‘lHl x 8v9'(Vl
_l
Display color Unlimited
Power input 100~240V AC, 50/60Hz
Fuse ratlng 250V, 3 3.0A(UL, CSA, TOV) or T 3415A(TUV)
Power consumption
On . Less than 120W
Stand by: Less than 15W
Suspend z Less than 15W
Off : Less than BW
Operating 0 To 40 Degree C.
:empera:ure ‘ y
Dimensrons ’ 410mm(Wj x407mmlHl x439mmlDll
16.l"(W) x 16.0"(Hl x 17 310)
Werght g 19.1Kg (net) /42.0 lbs
11
nu: USA
STANDARD NEW PRODUCT WARRANTY
Korea Data Systems, lnc.[l(DSlwarrants your new monitor product against defects in material
and workmanship for a period ol threelal years from the date of the original purchase of the new
product. This lirri- ed warranty covers the enouser lor threel3l years on parts, twol2) years on
the CRT, and on “ year on l or for new produc: purchases only Ar“ product delect not
originating r'rom oe cts in rn rials or workmanship Will no: be considered covered under
warranty
in the unlikely event that a component should fail during its threeyear warranty penod due to a
defect in materials or woflrmanship, KDS wil repair or replace at its opuon. the entire monitor with
a new or recertified monitor at equal or greater value For units. which fall within the first thirty
t30ldays following the date ol purchase, try-warranty replacement will cover parts and labor, KOS
will replace the deleczive preduct wtth new product of equal or greater value For units which lail
beyond thirty (30l days, but Within the firs: twelveltzl months pl ownership in»warranty
replacement Wl" cover pans and labor.
Fur unis which latl beyond the first twetveltzl months or ownership, charges lot labor wtll appty
to iii—warranty repairs. In-warranty replacement Will cover parts, For units which lail beyond the
first Menty-tourtZAlmonths or ownership, and up to the and of the three-year warranty period.
charges for labor Will apply to in - warranty repairs, ll replacement ol the picture tubelCl-‘m or
main control board is required parts. replacement charges wrll apply for those parts . lit-warranty
replacement Will cover remaining parts, For any warranty replacement. the customer is
responsible for one—way freight charges to a specified KDS service center All parts and labor
warranty coverage lisred above is limited by the exclusions listed below under WARRANTY
EXCLUSlON.‘ Replacement product will continue to be covered under the original owner's
three-year warranty period, or for a period ot' 90 days, whidiever is greater, Replacement product
will be shipped to the customer at KDS' excerlse to any point in the eonn’nental USA To take
advantage ol wairanty semaes mil
KDS Customer Service Department at1300l283- 1.711
ENHANCED WARRANTY OPTION
KDS will upgrade the standard threelBl year limited warranty on new monitor product purchases
to include all pans and labor lot three years from the date of original purchase upon realest This
enhancement must be requested wrthin ninerylSOldays of original purchase date This warranty
enhancement offer is subiect to change, and replaces any previous otters. Contact KDS
CustomerSevnelcrdetat'sonmongandpaymeitrnethoos lorwarrantyenhanoement
WARRANTY EXCLUSIONS
The limited wartmty does m: cover “fie raw: ackee, searcher; broken or mooted dam: other
com-tent cart-age or $3 rat have seen alt-era: med o'remweo or scratching cracungor Dreams
of me CRT ‘ , res mused cy'axxien'c l'TllSSJSé a: - negligence.
mmeical - ‘ imcrooe' swam; or alte'atio-s and repairs not taro-x w (DS or he
arthonzec agents. This iimneo wanan aces not me: renai‘ of manners Whose Omar quality degreoes
through normal usage (35 Shall not ze iaoJe "For any moenal or consequenbal damages rssulmg from
the use of this product
The lmiteo warranty gves you specnic ngnts. anc vcu many haxe other rights which may wry from sate
to state
REGISTRATION CARD
Extended Warranty Options:
(Below are two warranty enhancement options which increase the
standard limited warranty coverage)
neckl
_0ptiun 1: TwolZl year labor warranty enhancement
(this option extends the limited one“) year labor Warranty to twclzl years]
_0ption 2: Threel3) year full warranty enhancement
llhrs option extends coverage anall monitor components andlabor wthreelalysars)
reflect an extended warranty the preferred opu’on must be
tecked' and payment must be included with this form. Payment may
made via check, VISA or Master Card.)
ke checks payable to KDS, USA and mail with this completed form.
rdil Card Information
Type ofcardrwsA or Masler Cardlclrcle one)
Name on Card:
edit Card Number:
piration Date:
'our Information:
at Name.____ Last Name a
mpany
dress
/, ST Zip
ephone
FAX
roduct Information:
adel (You may place one of the labels from the box here)
rial Number
te Purchased
1“
eturn Information:
ese detach and return completed from to
stomer SENICE
. USA me
)O EdlSOrl Way
Ien Grove, CA 92841
800-283-1311
714-379-5592
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : Yes Create Date : 2001:06:28 11:32:34 Producer : Acrobat Distiller 4.0 for Windows Author : jsoscia Title : 33759.pdf Modify Date : 2001:06:28 11:32:37-04:00 Page Count : 19EXIF Metadata provided by EXIF.tools