Kti Networks Multi Tool Kgc 311 Users Manual Installation Guide
KGC-311 to the manual 74608e3f-a6e9-4d39-aab6-75791e1e7124
2015-02-09
: Kti-Networks Kti-Networks-Kti-Networks-Multi-Tool-Kgc-311-Users-Manual-569024 kti-networks-kti-networks-multi-tool-kgc-311-users-manual-569024 kti-networks pdf
Open the PDF directly: View PDF 
.
Page Count: 3
| Download | |
| Open PDF In Browser | View PDF |
Features Multimode to Single Mode Optical Fiber Media Converters KGC-311 Series Installation Guide DOC.070808-KGC311 General The KGC-311 is a mode to mode optical fiber converter series which provide the following conversions: No packet length limitation Provides LEDs for easy network monitoring Specifications Fiber Optic Interfaces (SFP-A & SFP-B Ports) Compliance IEEE 802.3z 1000BASE-SX/LX std. IEEE 802.3u 100BASE-FX std. Connectors SFP for pluggable fiber transceiver Data Speed 1000Mbps, full duplex (SW1-3: Off) 100Mbps. full duplex (SW1-3: On) Cable Types SFP-A MMF - 50/125, 62.5/125 µm SFP-B SMF - 9/125 µm Eye Safety compliance IEC825 Class 1 Center Interface Interface Connector For center chassis mounting FutureBus DC Power Input Interface Operating Voltages Power consumption DC Jack (-D6.3mm/+D2.0mm) DC input +5V ~ +12V max 2W @+7.5VDC input 3 4 Provides two SFP slots to support standard SFP fiber transceivers 2 Supports both 1000Mbps Gigabit Ethernet fiber and 100Mbps Fast Ethernet fiber applications Transparent conversion to any type of packet frame 1 Provides media conversion between single mode and multimode optical fiber media types 1000BASE-SX MM fiber to/from 1000BASE-LX SM fiber 100BASE-FX MM fiber to/from 100BASE-FX SM fiber Complies with IEEE 802.3z 1000Base-SX/LX and IEEE 802.3u 100Base-FX standard Center chassis installation : support installation in a center chassis rack with benefits of central software management, central power and redundant power backup. Diversified mounting support : desktop mounting, wall mounting, optional Din-Rail support Support wide range of single mode fiber options: short reach up to long reach, Bi-directional single fiber, and CWDM Low power consumption Mechanical Dimension (base) Housing Weight W 108mm x D 72.5mm x H 23mm Enclosed metal with no fan 206g LED Indicators PWR ON OFF GE/FE ON OFF SFP-A OL ON OFF SFP-B OL ON OFF Power on Power off GE MM to GE SM FE MM to FE SM SFP-A port optical signal detected No optical signal SFP-B port optical signal detected No optical signal Environmental Operating Temperature -5 ~ 55oC Storage Temperature -20 ~ 85oC Relative Humidity 10% ~ 70% Design Compliance FCC Part 15 Class B, CE / CISPR 22 Class B, IEC60950 Safety Desktop Mounting SW (Configuration Switches) SW1 ON - Gigabit Ethernet MM to SM OFF - Fast Ethernet MM to SM SW2 ~ SW5 Reserved The device can be mounted on a desktop or shelf. Make sure that there is proper heat dissipation from and adequate ventilation around the device. Do not place heavy objects on the device. Wall Mounting The device provides a mounting hole on the bottom case as shown in the figure. Use the hole for a wall mounting. Typical Applications Gigabit Ethernet 1000Mbps MMF to 1000Mbps SMF Applying Power Before you begin the installation, check the AC voltage of your area. The AC power adapter which is used to supply the DC power for the device should have the AC voltage matching the commercial power voltage in your area. The DC power input of the converter is: DC IN 0.24A min. @ 7.5V Fast Ethernet 100Mbps MMF to 100Mbps SMF Installing SFP Fiber Transceiver To install an fiber transceiver into an SFP slot, the steps are: 1. Turn off the power to the device unit. 2. Insert the SFP fiber transceiver into the slot. Normally, a bail is provided for every SFP transceiver. Hold the bail and make insertion. 3. Until the SFP transceiver is seated securely in the slot, place the bail in lock position. Note that SFP-A is reserved for MM transceiver and SFP-B is reserved for Single mode transceiver. DIN-Rail Mounting For a Din-Rail chassis, the media converter can support mounting on a Din-Rail. An optional Din-Rail bracket, KC-3DR can be purchased separately. Consult your dealer for details. The following figures show an example after bracket installation: 5 6 7 8 FCC NOTICE This device complies with Part 15 Class B the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including the interference that may cause undesired operation. CE NOTICE indicates compliance of this equipMarking by the symbol ment to the EMC directive of the European Community. Such marking is indicative that this equipment meets or exceeds the following technical standards: Center Chassis Installation The media converter can also be installed in KC-1300 center chassis. The center chassis provides the power supply to the converter also with optional power redundancy. Up to 16 units can be installed in one chassis. Unscrew and remove the cover of the center connector before inserting the converter into the chassis. Refer to the operation manual of center chassis KC1300 for more information. EMC Class B EN61000-6-3 EN55022 EN61000-3-2 EN61000-3-3 EN61000-6-1 EN55024 EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 EN61000-4-8 EN61000-4-11 IEC61000-6-1 CISPR22 IEC61000-3-2 IEC61000-3-3 IEC61000-6-1 CISPR24 IEC 61000-4-2 IEC 61000-4-3 IEC 61000-4-4 IEC 61000-4-5 IEC 61000-4-6 IEC 61000-4-8 IEC 61000-4-11 The information contained in this document is subject to change without prior notice. Copyright (C) All Rights Reserved. Trademarks Ethernet is a registered trademark of Xerox Corp. Fast Ethernet MM to SM (KGC-311-Fxxx) KGC-311 Series Model Optical Specifications DOC.070808-KGC311 Model -FSL3 SFP-A (MM) LC 1310nm MM 2km SFP-B (SM) LC 1310nm SMF 30km -FSL6 LC 1310nm MM 2km LC 1310nm SMF 60km -FSL10 LC 1310nm MM 2km LC 1310nm SMF 100km -FW3520 LC 1310nm MM 2km BiDi LC single fiber 20km Tx 1310nm Rx 1550nm -FW5320 LC 1310nm MM 2km BiDi LC single fiber 20km Tx 1550nm Rx 1310nm * BiDi: Model -FWxxxx use SM single fiber for bi-directional transmission. Model -FSL3 SFP-A (MM) Tx power Rx sens. -20 ~ -14 -31 SFP-B (SM) Tx power Rx sens. -15 ~ -8 -34 -FSL6 -20 ~ -14 -31 -5 ~ 0 -35 -FSL10 -20 ~ -14 -31 -5 ~ 0 -35 -FW3520 -20 ~ -14 -31 -14 ~ -8 -32 -FW5320 -20 ~ -14 -31 -14 ~ -8 -32 Model -LX SFP-A (MM) Tx power Rx sens. -9.5 ~ -4 -18 SFP-B (SM) Tx power Rx sens. -9.5 ~ -3 -20 -LX20 -9.5 ~ -4 -18 -8 ~ -2 -23 -LX30 -9.5 ~ -4 -18 -4 ~ +3 -23 -LX50 -9.5 ~ -4 -18 -4 ~ +1 -23 -LX70 -9.5 ~ -4 -18 0 ~ +5 -23 -W3510 -9.5 ~ -4 -18 -9 ~ -3 -21 -W5310 -9.5 ~ -4 -18 -9 ~ -3 -21 -W3410 -9.5 ~ -4 -18 -9 ~ -3 -21 -W4310 -9.5 ~ -4 -18 -9 ~ -3 -21 Gigabit Ethernet MM to SM (KGC-311-xxxx) Model -LX SFP-A (MM) LC 850nm MM 500m SFP-B (SM) LC 1310nm SMF 10km -LX20 LC 850nm MM 500m LC 1310nm SMF 20km -LX30 LC 850nm MM 500m LC 1310nm SMF 30km -LX50 LC 850nm MM 500m LC 1550nm SMF 50km -LX70 LC 850nm MM 500m LC 1550nm SMF 70km -W3510 LC 850nm MM 500km BiDi LC SM SF 10km Tx 1310nm Rx 1550nm -W5310 LC 850nm MM 500km BiDi LC SM SF 10km Tx 1550nm Rx 1310nm -W3410 LC 850nm MM 500km BiDi LC SM SF 10km Tx 1310nm Rx 1490nm -W4310 LC 850nm MM 500km BiDi LC SM SF 10km Tx 1490nm Rx 1310nm All models listed are shipped with a pre-installed SFP fiber transceiver.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : Yes Create Date : 2007:09:11 11:21:45 Producer : Acrobat Distiller 4.0 for Windows Title : KGC-311 Installation Guide Subject : KGC-311 Installation Guide Author : Creator : Adobe PageMaker 7.0 Modify Date : 2007:09:11 11:21:51+08:00 Page Count : 3EXIF Metadata provided by EXIF.tools