Kunhuang Technology CUBERB Bluetooth Speaker User Manual
KUNHUANG TECHNOLOGY CO., LTD. Bluetooth Speaker
User manual
lllIIETIIII'I'II °°‘ SPEAKER PACKAGE CONTENTS: 0 u. :‘ 1.Bluetooth Speaker ‘7 * >174?“ ”Wu“ 2,User's Manual 3.use cable M51“. 4.Audi0 cable “'"‘”""°"' QHARQINQ THE §PEAKER2 Before using the speaker for the first time, charge It for at least 12 hours. 1.Plug the USB cable into the port on the speaker, plug the other end into the USB port on the computer ZRed LED will turn on to indicate unit is charging. 3,Red LED wrll turn oft when fully charged. PAIRING THE DEVICE 1.Place the speaker near the Bluetooth enabled device 2.Push the ON/OFF button to ON. blue LED will flash 3 times slowly then flash quickly. the speaker enter into pairing mode. 3.Fo|low the instruction of your device to search the speaker, 4.Find the speaker called 'Speaker-DZ" and enter the PIN “0000‘ if need. 5,Blue LED will flash slowly when complete. BASIC INSTRUCTIONS Blue LED stays on when playing the music. The speaker will beep every 20 seconds when the battery is low. To turn off the speaker. push the ONIOFF button to OFF. To turn on the speaker, push the ONIOFF button to ON, the speaker will beep and blue LED will flash slowly. LEDLMDJQAIQB Charging: Red LED on Fully Charged: Red LED off Pairing Mode: Blue LED flash quickly Connected: Blue LED flash slowly Playing: Blue LED stays on TECHNICAL SPECS: Bluetooth standard: 2.1 Bluetooth agreementzAZ DP Working Distance: 30ft. Frequency Range: 100Hz < 20KHz SIN Rati £:'-Bl]Db Distortion Factor: 521.0% Playing time: 3-4 hours Charge time: 4 hours regular. 12 hours initial. SAFETYAND GENERAL INFORMATION: Do not expose the device to water or attempt to disassemble the device. If exposed or disassembled, user may be at risk from electric short. Handle this product with care. without proper care the device may not function properly. Do not use a product in the aircraft and in the hospital. Do not expose the device under the sunlight directly. Device may get warm during charging. FCC COMPLIANCE STATEMENT To assure continued compliance. any changes or modifications not expessly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This device complies with Part 15 of the FCC Rules, Operation is subject to the following two conditions: (1 ) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that maycause undesired operation. F R i nEx r t m n: This equipment complies with FCC RF radiation exposurelimits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Title : 全页照片 Author : bovey Creator : pdfFactory Pro www.pdffactory.com Producer : pdfFactory Pro 3.51 (Windows 7 Ultimate Chinese (Simplified)) Create Date : 2013:05:30 16:31:52+08:00 Page Count : 1EXIF Metadata provided by EXIF.tools