Kuppersbusch Usa 604 2 Users Manual
2015-02-05
: Kuppersbusch-Usa Kuppersbusch-Usa-604-2-Users-Manual-407653 kuppersbusch-usa-604-2-users-manual-407653 kuppersbusch-usa pdf
Open the PDF directly: View PDF 
.
Page Count: 12
| Download | |
| Open PDF In Browser | View PDF |
User’s guide EKE 854.2/804.2/604.2 KC 906.2 072452 I31 223947 I31 with pan recognition For your information... Content Carefully read the information in this manual before you use your appliance. You’ll find important information about safety and how to use, maintain and service your appliance so that it enjoys a long service life. Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Disposing of the packaging and the old appliance . . . . . . For your information.... . . . . . . . . . . . . . . . . . . . . . . . . . Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . Before using the first time. . . . . . . . . . . . . . . . . . . . . . . Your appliance at a glance . . . . . . . . . . . . . . . . . . . . . . Using the cook top . . . . . . . . . . . . . . . . . . . . . . . . . . . . If you experience any problems, first be sure to read the chapter titled “What to do if trouble occurs...”. Usually it's easy to solve minor problems yourself and avoid unnecessary service costs. Please keep this manual in a safe place and pass it on to new owners for their information and safety. The following symbols are used in this operating manual: warning triangle will alert you about possible health risks or things [ The that can cause potential damage to your appliance. F You'll find useful hints and information when you see this symbol. Warranty 3 3 3 4 4 5 5 Sensor sensivity reset Switch on a cooking zone (Stand-by-mode) The cooking setting Using the automatic boost function Switching off a cooking zone: Switching off the cooking surface Using a frying or dual-circuit cooking zone without the pan recognition sensor Cooking zone heating indicator The pan recognition function . . . . . . . . . . . . . . . . . . . . . 7 This warranty is extended to the original purchaser and succeeding owners for products purchased for ordinary home use. It does not cover its use in a commercial situation. Should the appliance be sold by the original purchaser during the warranty period, the new owner will continue to be protected until the expiration date of the original purchaser's warranty period. Save your dated receipt or other evidence of the installation/occupancy date. Proof of original purchase date is needed to obtain service under warranty. The warranty applies even if the owner should move during the warranty period. KÜPPERSBUSCH does not assume any responsibility for consequential or incidental damages. This warranty provides you with certain legal rights. You may also have other rights which may vary from state to state. What Is Covered For one full year from the date of the original purchase, we will provide parts, service and labor in your home to repair or replace any part of the cook top that fails because of a defect in materials or workmanship. This service is provided free of charge. All warranty service will be provided by our authorized Customer Care professionals during normal business hours. What Isn’t Covered 1. Service by an unauthorized agency will not be reimbursed. Likewise, the warranty doesn't cover any damage or repairs due to service performed by an unauthorized agency, or by the use of unauthorized parts. 2. Service visits to teach you how to use the appliance. 3. Service visits to correct the installation. You are responsible for providing electrical wiring and other connecting facilities. 4. Reset circuit breakers or replacement of home fuses. 5. Damage resulting from accident, alteration, misuse, improper installation, abuse or installation not in accordance with local electrical codes, or improper storage of the appliance. 6. Repairs due to other than normal household use. Deactivate the pan recognition function Re-activate the pan recognition function The automatic pan size sensor of the dual circuit zone/frying zone Time limit function (holiday function) Child proof lock (sensor-lock). . . . . . What happens if... . . . . . . . . . . . . . Selecting pots and pans . . . . . . . . . Cleaning and care . . . . . . . . . . . . . ............... ............... ............... ............... ............... 7 8 8 8 9 Please pay attention to the information about the cleaning scraper Cleaning the cooking surface Remove caking Care of the cooking surface What to do if trouble occurs... . . . . . . . . . . . . . . . . . . . . 9 After Sales Service. . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 For technical information and/or replacement parts, please contact the Küppersbusch Customer Care line at 1-800-459-0844 For the most efficient assistance, please have the Model and Serial numbers for the appliance available. Disposing of the packaging and the old appliance Be sure to dispose of the transport packaging properly. Disposal should not have a negative impact on the environment. Recycling the packaging saves raw materials and reduces the amount of waste. Be sure to dispose of your old appliance properly, as well. Even if it can no longer be used, it still contains useful materials. Before discarding an old appliance, disconnect the power cord to prevent it from becoming a hazard. KC 906.2 and EKE Users Guide USA with pan recognition 3 Safety instructions ■ The cooktop must be built into a countertop opening! Do not use the appliance if it has not been installed! ■ Be sure the appliance is properly installed and grounded by a qualified technician. ■ The appliance may only be installed and connected to the power supply, maintained, and repaired by a qualified electrician in accordance with safety regulations. Do not repair or replace any part of the appliance unless specifically recommended in this manual. Work performed incorrectly puts your safety at risk. ■ This appliance is for residential use only. Use for any other purpose is at the owner’s risk and could be dangerous. The manufacturer can’t be held responsible for damage caused by improper use of this appliance. ■ Danger of burning! The cook top becomes hot during operation. CAUTION: Keep children away from this appliance. ■ CAUTION! Items of interest to children should not be stored in cabinets above a cooktop. A child can be seriously injured by climbing on a cooktop to reach them. ■ Do not leave children alone or unattended in the area where the appliance is in use. They should never be allowed to sit or stand on any part of the appliance. ■ Don’t touch the cooking surface or areas near it. The cooking surface may be hot even though it’s dark in color. Areas near it may become hot enough to cause burns. During and after use, do not touch the surface, or let clothing or other flammable materials come in contact with it until it’s had time to cool. ■ ■ Use the proper pan size. This appliance is equipped with different sized surface units. Use flat-bottomed cookware that is large enough to cover the surface unit heating element. The use of undersized cookware will leave a portion of the heating element exposed and direct contact could result in the ignition of clothing. Using a proper relationship between cookware and burners wil also improve efficiency. Review “Selecting pots and pans“ on page 7. Flammable materials should not be stored near surface units. Don’t put combustible or flammable objects on the cooking top. They could be ignited if the burners are unintentionally turned on. ■ Do not use aluminium foil to line the surface unit drip bowls. ■ The glass ceramic surface is very durable and can easily withstand light to medium impacts and loads distributed over large areas. Be sure to avoid concentrated loads (i.e. spice bottles) from falling on the surface to avoid cracking or breaking of the cooking surface. extinguisher. ■ Don’t switch the cooking surface on unless you’re using it for cooking. Never use a cooking zone without a pot or pan set on it. Never use the appliance to heat a room! ■ Immediately switch off the cooking zone after using with the respective minus key and not just by pot recognition. ■ Never leave the cooking surface unattended at high heat settings. Boilover can cause smoking and greasy spillovers that may ignite. ■ Wear proper apparel. Loose-fitting or hanging garments should not come in contact with the cooking surface. Dish cloths, potholders and aprons should not be stored near the surface units. ■ To reduce the risk of burns, ignition of flammable materials, and spillage due to unintentional contact with the untensil, the handle of an utensil should be positioned so that it is turned inward, and does not extend over adjacent surface units. ■ Use only dry potholders. Moist or damp potholders on hot surfaces may result in burns from steam. Do not let potholder touch a hot surface. Do not use a towel or other bulky cloth. ■ CAUTION! Only certain types of glass, glass/ceramic, ceramic, earthenware, or other glazed utensils can be used on the range-top without breaking, due to the sudden change in temperature. Follow the manufacturer’s instructions! ■ Do not place non-food items on the cooking surface when it's hot. ■ Be careful when working with attachments! The connecting cord must not come in contact with the hot cooking surface. ■ Do not put plastic on the cooking surface. Things that can melt (i.e. plastics, foils or sugar), must be kept away from the cooking surface. Be sure to immediately remove or lift off any melted item from the hot cooking surface. Use the supplied cleaning scraper in order to avoid damage to the cooking surface. ■ Clean and remove any burned-on materials. Don’t heat these materials repeatedly. ■ Lime deposits are harmful to the cooking surface. ■ If a wet sponge or cloth is used to wipe spills on a hot cooking area, be careful to avoid steam burn. Some cleaners can produce noxious fumes if applied to a hot surface. Please follow the cleaning and maintenance instructions carefully! ■ ■ CAUTION! If the cooking surface becomes cracked or fractured, quit using the appliance immediately. Disconnect the power and call Customer Service. Cleaning solutions and spills may penetrate the broken cooktop and create a risk of electric shock. ■ Never flambé under the cooker hood. The fat in the filter can ignite! ■ The connecting cable must not come in contact with the hot cooking surface. ■ CAUTION: Overheated greases and oils may ignite themselves. Prepare meals with greases and oils very carefully and control the heat. Should fats or oils ignite, do not use water to extinguish them! Smother the fire or flame or use a dry chemical or foam-type 4 Before using the first time – Before using the appliance the first time, be sure to clean the cooking surface with a mixture of water and mild detergent on a clean cloth. Then wipe the surface dry with a non-fluffy cloth. KC 906.2 and EKE Users Guide USA with pan recognition Your appliance at a glance Using the cook top EKE 854.1 KC 906.2 [ Read the safety instructions! Sensor sensivity reset Important: Make sure no objects are on the sensors while the sensor sensitivity is being set. F After initial connection and after a power failure the abbreviations “'%0” appear briefly in the LED displays. Rotating circles are then displayed. This means the sensors are being self-tested and the button sensitivity reset simultaneously. – Acknowledge this display by touching the Off-sensor. Make sure no objects are lying on the sensors! These symbols are switched off immediately. EKE 804.2 – Otherwise, remove objects and briefly disconnect the cooking zone from the main power source. Switch on a cooking zone (Stand-by-mode) F Before you start to use a cooking zone, put the cook top into the standby mode. F When you turn the cooking surface on, you will hear a short buzzing noise as it heats. This is design-specific and does not affect the quality and operation of the appliance. – Press the sensor-button for approx. 2 seconds. The LED-display above the sensor lights up and the appliance is in operation (stand-by mode). EKE 604.2 The stand-by mode automatically switches itself off, – if no cooking zone is activated within 20 seconds (after 10 seconds an acoustic signal will indicate that the appliance will switch itself off after another 10 seconds) or – if the appliance is not used 1 minute after starting operation. The cooking setting You have 9 cooking settings available. Cooking setting Suitable for 1 Dual circuit cooking zone 1-3 Heating, warming, browning, defrosting 2 Sensor buttons for cooking settings 4-5 Steaming, poaching, boiling 3 Off-sensor 6-8 Roasting, deep-frying 4 Stand-by-Sensor 5 Child proof lock (sensor-lock) 6 Normal cooking zone 7 Normal cooking zones, usably as a frying zone 8 Frying zone KC 906.2 and EKE Users Guide USA with pan recognition 9 Heating large quantities Select the required cooking setting with the plus- or- minus sensor. It will be indicated in the display. If you use the minus sensor, you will start with a boost. If you use the plussensor, you start without a boost. 5 Switching off a cooking zone: When pressing the plus sensor, the cooking zone starts at cooking setting 5, without boost. and When pressing the minus sensor, the cooking zone starts at cooking setting 9. This automatically starts the automatic boost. – Press the plus- and -minus sensor at the same time. The “0” position is visible for about 2 seconds after the appliance switches off. Switching off the cooking surface All the cooking zones can be switched off quickly with the offsensor. Using the automatic boost function All cooking zones are equipped with an automatic boost function. Maximum power is used for the boost. The time period of the boost depends on the selected cooking setting. After the elapsed time, the cooking zone automatically switches back to the selected cooking setting. If the cooking zone is yet not in use – Press the minus sensor until the required cooking setting is displayed. The boost function switches on automatically. Using a frying or dual-circuit cooking zone without the pan recognition sensor As a rule, only the smaller cooking zone diameter is heated. However, when using frying pans and large saucepans, you may decide to switch on the outer cooking zone circuit. Switching on the frying or dual-circuit zone: – Press the cooking zone symbol next to the plus/minus sensor. A dot at the bottom right of the display for the cooking level indicates that the function has been switched on. During automatic operation an “A” lights up in the display alternately with the selected cooking setting. If you are already using the cooking zone – Press the plus sensor again after reaching cooking setting 9. The automatic boost function is activated. Select the required cooking setting. – Pressing the cooking zone symbol will once again deactivate the dual circuit cooking zone or frying zone. Model EKE 854.1 and KC 906.2 only: To heat a frying pan, you can use the two small, closely adjacent cooking zones. The temperature must be controlled via the setting controls for both cooking zones. We recommend that you set both cooking zones at the same cooking level. 2X “A” lights up in the display alternately with the selected cooking setting. 6 KC 906.2 and EKE Users Guide USA with pan recognition Cooking zone heating indicator Even though the cooking zone is turned off, an “H” will appear in the display as long as the cooking zone is still hot. IIf this circle lights us, there is a defect in the pan recognition function. However, you can continue to use the cooking zone. The automatic pan size sensor of the dual circuit zone/frying zone The pan recognition function the respective minus key, immediately switch off the cooking zone. [ Using Do not turn it off just by pot recognition. have deactivated the pan recognition function and you switch off [ Iftheyoucooking zone, the pan recognition function is activated again! F Only operate he pan recognition function with utensils made of metal! If the pan recognition function is activated, the dual circuit zone has a sensor to detect the size of the pan being used. When a small pan is placed on the cooking zone, only the inner ring will switch on. If the entire zone is covered by the pan, both rings will switch on. Please note that the outer ring must always be completely covered, even if you are using pans with a rounded base. All cooking zones have a pan recognition function. This means the cooking zone will recognize whether a saucepan has been put on the cooking zone or not. The dual-circuit zone can also detect the saucepan size (see “The automatic pan size sensor of the dual circuit zone/frying zone” at the next page). If a suitable pan is put on the cooking zone, “U” is indicated by the display. Moving the pan during cooking can cause the outer ring to switch off if it hasn’t been completely covered. If no pan or an unsuitable pan is put on the cooking zone, an underlined “U” is indicated. If the cooking zone is on and there is no pan or pot on it, the cooking zone automatically switches itself off after 1 minute. This means you must switch on the cooking zone to cook again, which reactivates the pan recognition! Time limit function Deactivate the pan recognition function F When glass pans or other pans that are unsuitable for use with the saucepan sensor are used, you must deactivate the pan recognition function. This must be done for each and every cooking zone. – Press the plus and minus sensor at the same time before selecting the cooking setting. and A circle will appear in the display next to the selected cooking setting. The appliance is equipped with an automatic time limit function. This function makes sure that the appliance isn’t in operation for an extended period of time. The time period of the time limit depends on the selected cooking setting, i.e. The higher the selected cooking setting, the faster the appliance is switched off. Cooking setting Switching off time after 9 8 7 6 1 hours 5 3 hours 4 4 hours 3 2 5 hours 1 10 hours The function to limit operation time works separately for each cooking zone.. KC 906.2 and EKE Users Guide USA with pan recognition 7 Child proof lock (sensor-lock) Selecting pots and pans Operating the sensor lock prevents unauthorized people from using the appliance. In order to activate this lock, the cooking area has to be in operation. Only certain types of glass, glass/ceramic, ceramic, earthen[ CAUTION! ware, or other glazed cookware are suitable for range-top service without breaking due to the sudden change in temperature. Follow the manufacturer's instructions! Activating childproof lock: Press the sensor lock (2 seconds). The childproof lock can be activated if the cooking area is in operation. It will only allow the selection of a lower cooking setting or the off switch. F The lock is indicated by 3 flashing control indicators. . Only pots and pans made of metal can be used with the pan recognition function. To use other kinds of utensils, please deactivate the pan recognition function. You can save time and power by using ideal pots and pans. ■ Use pots and pans with flat, smooth bottoms. Uneven bottom surfaces can increase energy usage and the amount of time needed to start the cooking process.. ■ ■ Be careful: Switching off the cooking area doesn’t deactivate the childproof lock! Pans with rough bottom surfaces will scratch the glass-ceramic cooking area when they are moved around. Use a pan with a diameter at least as large as the cooking area. Using undersized cookware will expose a portion of the heating element to direct contact and may result in ignition of clothing. Deactivating the child proof lock: at once, after max. 3 Sek. ■ Press the sensors beneath the two left flashing control indicators at once. For less than three seconds press the sensor under the flashing control indicator on the right. Whenever possible, always place a lid on the pan. It will help you save a lot of energy. Liquids and foods will only boil over if the temperature is set too high. The cooking zones enable you to set the required temperature precisely. With a little practice, you’ll learn how to choose the perfect cooking settings so nothing will boil over--even when a lid is on.! Note: When the power supply has been interrupted, the childproof lock is no longer active. What happens if... ■ ■ ■ ■ 8 ...you press two or more sensor keys – at the same time? (i.e. when a pan is mistakenly put onto the sensor key?) No function is activated. An audible signal will sound after 10 seconds. The appliance will switch off automatically after 20 seconds. ...you continue to press a sensor button even after having set the highest cooking setting? An audible signal will sound after 10 seconds. After 20 seconds the appliance will switch off automatically. ...there is a power outage? The appliance won’t automatically switch on again. If the childproof lock was activated before the power failure, it will be deactivated. ...the electronics overheat? The cooktop will automatically switch off. All 4 LED indicators will flash and a cyclical signal will be heard. KC 906.2 and EKE Users Guide USA with pan recognition Cleaning and care What to do if trouble occurs... and food containing sugar (i.e. marmalade) and melted plastic [ Sugar must immediately be removed from the hot cooking surface with the unscrew the appliance! Only a qualified technician should perform [ Never repairs!! cleaning scraper. If not, the cooking surface can be ruined while it’s cooling down. and/or pressure cleaning machines can’t be used to clean the [ Steam appliance! This can damage the unit, and result in the risk of personal However, there are some problems that you can handle yourself. First, check and see if there have been any operating errors. Remember – repairs during the warranty period are not free of charge if they are caused by operating errors or non-observance of the following instructions: injury. of burning! Make sure the appliance has cooled down before [ Risk cleaning. If a wet sponge or cloth is used to wipe spills on a hot surface, you could be burned by the resulting steam. Be aware that some cleaners can produce noxious fumes if applied to a hot surface. [ Please note the instructions regarding cleansers. F Clean the cooking surface after every use. Food residue that hasn’t been removed will burn into the surface the next time it’s turned on and then these incrustations may be permanent. F Cleanser residues can cause discoloration the next time you turn on the cook top. Cloths and sponges that have been used to clean other surfaces can cause discoloring, too. F VSR O-FIX-C is the perfect cleanser for glass ceramic. You can get it from KÜPPERSBUSCH Customer Service. Do not use any - aggressive or bleaching cleaning agents that contain active oxygen, chlorine or corrosive components. - abrasive or aggressive cleaning or scouring agents like steel wool, soap-filled steel wool, metal or plastic sponges or similar agents with an abrasive surface. Please note the information for the cleaning scraper [ CAUTION! Risk of cutting! The blade of the cleaning scraper is very sharp! Always keep the cleaning scraper flat on the surface and push the caking away. not scratch the surface with the edge of [ Do the scraper and don’t damage the sealing with the edge. Problem Cooking surface can’t be switched off. The LED indicator for the cooking level or heat indicator does not light up or only partly lights up. Possible cause Regulator or electronic component is defective. LED indicator defective. Solution See below: “What is to be done if...” Call Customer Service. of burning, as there [ Risk is no temperature warn- ing. Circulating dash symbols on No problem; this is the If no objects have been lying all 4 LED displays. normal display after a on or obstructing the senpower interruption. sors, confirm this by pressing the Off-sensor. Horizontal dashes that are Failure of electronic Switch off the fuse. Call Cusshown on the display run- component. tomer Service. ning from top to bottom. Cooking area doesn’t heat. Fuse is defective. Check the fuse and replace, if necessary. Childproof lock Deactivate child proof lock. activated. Cooking area is defec- Call Customer Service. tive. Do not, under any cirInner circuit of the cumstances, continue to dual-circuit zone is use the outer circuit defective. That’s still working! It will destroy the glass ceramic surface. Call Customer Service. Individual / all sensors do See below: “What is to be not react to touch. done if...” [ What do you do if… ... one or more sensors don’t react to touch? Cleaning the cooking surface – Use the cleaning scraper to remove all food residue and fat splashes from the hot cooking surface. – When the cooking surface has cooled, clean it with water and a small amount of detergent, with a cleanser for glass ceramic surfaces or with VSR O-FIX-C. A soft brush or a soft sponge can also be used. – Wipe off the surface with clear water. – Dry it thoroughly. Remove caking Possible cause: The sensors constantly adapt in sensitivity to ambient conditions. Unfavorable conditions (i.e. if something is laying on a sensor) may cause the sensors not to react for several minutes.) Wait for about 15 minutes or pull the appropriate fuse and then re-insert it. Repeat this procedure if necessary! The keys have adapted and will react to touch again. ... one or more sensors don’t react to touch despite repeating this procedure? Possible cause: Faulty sensor key or component. If you’ve repeated the procedure and the keys still don’t react, pull the fuse again and then contact our Customer Service. ... the circle next to the cooking setting lights up? Heavy food residue should be soaked first. Use a wet cloth for best results. It will be easier to remove the food residue. Possible cause: Defect of the pan recognition function. Care of the cooking surface If this circle lights up, there is a defect in the pan recognition function,. You can nevertheless continue to use the cooking zone. Clean the glass ceramic surfaces with a cleanser to protect it from discoloring, and reduce the danger of damage from sugar. It can also remove stains and discoloration KC 906.2 and EKE Users Guide USA with pan recognition 9 After Sales Service In the event of a problem that you can’t easily fix yourself, or for spare part service, please contact the Küppersbusch Customer Care line at .1-800-459-0844 F Always have the information from the identification panel handy when calling Customer Service. The panel is located on the underside of the cook top and on the cover page of this manual. Model 10 Production number KC 906.2 and EKE Users Guide USA with pan recognition KÜPPERSBUSCH 112 N. East Street, Suite C Tampa, Florida 33602 Telephone: 813-229-7096 Fax: 813-229-0982 Customer Care line: 1 - 800 - 459 - 0844 www.kuppersbuschusa.com KÜPPERSBUSCH is a brand of Teka USA, Inc.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : Yes Create Date : 1910:20:31 81:10:43 Producer : Acrobat Distiller 3.01 for Windows Author : Köster Creator : Windows NT 4.0 Title : Untitled Document Modify Date : 2002:08:08 14:11:50-04:00 Page Count : 12EXIF Metadata provided by EXIF.tools