Kvh Industries Tracvision G4 Users Manual Technical

2015-02-09

• Welcome Page
• Table of Contents
• 1 - Introduction
  • 1.1 - TracVision G4 System Overview
  • 1.2 - TracVision G4 Components
  • 1.3 - Materials Provided With the TracVision G4
• 2 - Installation
  • 2.1 - Planning the Installation
  • 2.2 - Mounting the TracVision Antenna
  • 2.3 - Mounting the GyroTrac Sensor
  • 2.4 - Mounting the ADCU
  • 2.5 - Connecting the IRD(s)
  • 2.6 - Wiring the ADCU
  • 2.7 - Calibrating the Sensor
  • 2.8 - Activating/Programming the IRD
  • 2.9 - Installing Satellites Using the ADCU
  • 2.10 - Setting the Skew Angle (European Systems Only)
  • 2.11 - Checking Out the System
  • 2.12 - Changing Geographic Location
• 3 - Using the ADCU Interface
  • 3.1 - Startup and Self-test
  • 3.2 - Data Display and Accessing the Main Menu
  • 3.3 - Setup Display Mode
  • 3.4 - Set Data Outputs Mode
  • 3.5 - Set Configuration Mode
  • 3.6 - Control Compass Mode
  • 3.7 - Antenna Status Mode
  • 3.8 - Control Antenna Mode
• 4 - Troubleshooting
  • 4.1 - Troubleshooting Matrix
  • 4.2 - Causes and Remedies for Common Operational Issues
  • 4.3 - GyroTrac-specific Issues
  • 4.4 - IRD Troubleshooting
  • 4.5 - Antenna Gyro and LNB Faults
  • 4.6 - Computer Diagnostics
  • 4.7 - Maintenance Port Parser Commands
• 5 - Maintenance
  • 5.1 - Warranty/Service Information
  • 5.2 - Preventive Maintenance
  • 5.3 - TracVision G4 Field Replaceable Units
  • 5.4 - Replacing the Main PCB and Fuses
  • 5.5 - Replacing the RF PCB
  • 5.6 - Replacing the Antenna Gyro Assembly
  • 5.7 - Replacing the Elevation Motor and Belt
  • 5.8 - Replacing the LNB
  • 5.9 - GyroTrac Field Replaceable Units
  • 5.10 - Preparing for Shipment
• Appendices
  • Appendix A - System Specifications
  • Appendix B - TracVision G4 Baseplate Mounting Holes Template
  • Appendix C - ADCU Flush Mount Panel Template
  • Appendix D - Comprehensive TracVision G4 System Wiring Diagram
  • Appendix E - Optional Rotating Card Display
  • Appendix F - Startup Data Sequences
  • Appendix G - GyroTrac Data Outputs
  • Appendix H - Maintenance Port Parser Commands
• Warranty Page