Kyocera E6790 PDA Phone User Manual AT T Kyocera Charger S W EN

Kyocera Corporation PDA Phone AT T Kyocera Charger S W EN

User Manual

Download: Kyocera E6790 PDA Phone User Manual AT T Kyocera Charger S W EN
Mirror Download [FCC.gov]Kyocera E6790 PDA Phone User Manual AT T Kyocera Charger S W EN
Document ID2720185
Application ID7btK8taXQr7taJWEfp5b/g==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize43.76kB (547022 bits)
Date Submitted2015-08-20 00:00:00
Date Available2016-02-16 00:00:00
Creation Date2015-07-23 17:55:00
Producing SoftwareAcrobat Distiller 9.5.5 (Windows)
Document Lastmod2015-08-18 10:23:59
Document TitleAT&T_Kyocera_Charger_S&W_EN.book
Document CreatorFrameMaker 10.0.2
Document Author: 14Apr_Dell

Safety &
Warranty
Information
Important Safety Information
This section contains important operational and safety information that
will help you safely use your phone. Failure to read and follow the
information provided in this section may result in serious bodily injury,
death, or property damage.
Para la versión en español, visite nuestro sitio web en
http://www.kyoceramobile.com/support/phone/ y seleccione su
teléfono.
General Precautions
There are several simple guidelines to operating your phone properly and
maintaining safe, satisfactory service.
● To maximize performance, do not touch the portions of your phone
where the internal antennas are located while using the phone.
● Speak directly into the mouthpiece.
● Do not expose your phone to direct sunlight for extended periods of
time (such as on the dashboard of a car).
● Although your phone is quite sturdy, it is a complex piece of
equipment and can be broken. Avoid dropping, hitting, bending, or
sitting on it.
● Any changes or modifications to your phone not expressly approved in
this document could void your warranty for this equipment and void
your authority to operate this equipment.
Note: For the best care of your phone, only Kyocera-authorized
personnel should service your phone and accessories. Failure to
do so may be dangerous and void your warranty.
Important Safety Information
Maintaining Safe Use of and Access to Your
Phone
Do Not Rely on Your Phone for Emergency Calls
Mobile phones operate using radio signals, which cannot guarantee
connection in all conditions. Therefore you should never rely solely upon
any mobile phone for essential communication (e.g., medical
emergencies). Emergency calls may not be possible on all cellular
networks or when certain network services or mobile phone features are
in use. Check with your local service provider for details.
Using Your Phone While Driving
Talking on your phone while driving (or operating the phone without a
hands-free device) is prohibited in some jurisdictions. Laws vary as to
specific restrictions. Remember that safety always comes first.
Following Safety Guidelines
To operate your phone safely and efficiently, always follow any special
regulations in a given area. Turn your phone off in areas where use is
forbidden or when it may cause interference or danger.
Medical Devices
If you have a medical device, including an implantable medical device
such as a pacemaker or defibrillator, consult your healthcare provider and
the device manufacturer’s directions before using this mobile phone.
Persons with implantable medical devices:
● Should always keep the mobile phone more than six (6) inches from
the implantable medical device when the mobile phone is turned ON.
● Should not carry the mobile phone in the breast pocket.
Important Safety Information
● Should use the ear opposite the implantable medical device to
minimize the potential for interference.
● Should turn OFF the mobile phone immediately if you have any reason
to suspect that interference is taking place.
Using Your Phone Near Other Electronic Devices
Most modern electronic equipment is shielded from radio frequency (RF)
signals. However, RF signals from wireless phones may affect
inadequately shielded electronic equipment.
RF signals may affect improperly installed or inadequately shielded
electronic operating systems or entertainment systems in motor vehicles.
Check with the manufacturer or their representative to determine if these
systems are adequately shielded from external RF signals. Also check with
the manufacturer regarding any equipment that has been added to your
vehicle.
Consult the manufacturer of any personal medical devices, such as
pacemakers and hearing aids, to determine if they are adequately
shielded from external RF signals.
Note: Always turn off the phone in healthcare facilities, and request
permission before using the phone near medical equipment.
Using Your Phone On Airplanes
On airplanes, follow applicable airline regulations and always follow the
flight crew’s instructions concerning the use of your phone.
Turning Off Your Phone in Dangerous Areas
To avoid interfering with blasting operations, turn your phone off when in
a blasting area or in other areas with signs indicating two-way radios
should be turned off. Construction crews often use remote-control RF
devices to set off explosives.
Important Safety Information
Turn your phone off when you’re in any area that has a potentially
explosive atmosphere. Although it’s rare, your phone and accessories
could generate sparks. Sparks can cause an explosion or fire, resulting in
bodily injury or even death. These areas are often, but not always, clearly
marked. They include:
● Fueling areas such as gas stations.
● Below deck on boats.
● Fuel or chemical transfer or storage facilities.
● Areas where the air contains chemicals or particles such as grain,
dust, or metal powders.
● Any other area where you would normally be advised to turn off your
vehicle’s engine.
Note: Never transport or store flammable gas, flammable liquids, or
explosives in the compartment of your vehicle that contains your
phone or accessories.
Note: Your phone complies with the Standards for Hazardous Location
Equipment. Refer to the following section ‘Using Your Phone in
Hazardous Locations’ for details.
Using Your Phone in Hazardous Locations
Your phone complies with the Standards for Hazardous Location
Equipment as a Nonincendive Electrical Equipment for use in a Class I,
Division 2, Groups A, B, C & D with a Temperature Code of T4.
Precautions
● Ensure that your phone is not exposed to the temperature outside the
limits stated below.
▪ Ambient Temperature:
-4° F to 131° F (-20° C to 55° C)
▪ Charging Temperature:
32° F to 122° F (0° C to 50° C)
Important Safety Information
▪ Storage Temperature:
▪ Less than one month:
-4° F to 140° F (-20° C to 60° C)
▪ More than one month:
-4° F to 113° F (-20° C to 45° C)
● Do not charge your phone in Division 2 hazardous locations.
● Use only the charger provided with your phone: battery charger
SCP-46ADT and USB data cable SCP-17SDC.
● The headset jack cover, charger/USB port cover, and battery door
must be properly sealed in Division 2 hazardous locations.
● Do not connect anything to the headset jack or the charger/USB
port in Division 2 hazardous locations.
● Do not open the battery door in Division 2 hazardous locations.
Detecting Damages
If you suspect any compromise on the safety of your phone, immediately
stop the operation and remove it from the hazardous locations. Some
examples where the safety of the phone may be impaired are when:
● the exterior of the phone has a visible damage, or the markings or
inscriptions are illegible.
● the phone has been damaged in transit, improperly stored, or subjected
to excessive loads.
● malfunctions occur.
● permitted limit values have been exceeded.
WARNING: EXPLOSION HAZARD - SUBSTITUTION OF COMPONENTS
MAY IMPAIR SUITABILITY FOR USE IN CLASS I, DIVISION 2.
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN
INCORRECT TYPE. USE ONLY BATTERY MODEL SCP-65LBPS.
DISPOSE OF USED BATTERIES ACCORDING TO THE
INSTRUCTIONS.
Important Safety Information
4009869
Conforms to ANSI/ISA Std. 12.12.01 & UL Std. 60950-1
You can also find the ETL mark through the Settings menu.
From the Home screen, tap Apps
> Settings
About phone
> Compliance information.
Restricting Children’s Access to Your Phone
Your phone is not a toy. Do not allow children to play with it as they could
hurt themselves and others, damage the phone or make calls that
increase your invoice.
Important Safety Information
Waterproof Capability
Your DuraForce XD is waterproof and meets IPX5, protection against
sprayed water and IPX8 standards, submersible for up to 30 minutes at a
depth not exceeding 1.8 meters (about 6 feet). Exposing your phone to
water outside these limits or not following the precautions can result in
water damage and will invalidate the Consumer Limited Warranty.
To ensure that your phone maintains waterproof capability, the following
precautions must be observed.
● Make sure the charger/USB port and headset jack covers and battery
door are properly seated, with no foreign objects obstructing the seals.
● Do not spray or immerse your phone in liquids other than fresh water or
tap water, such as detergent, beverages, or chlorinated or treated water.
Certain liquids such as salt water and chlorinated water are corrosive
over time. Should your phone be accidentally exposed to other liquids,
rinse the phone gently in clean fresh water.
● Do not expose your phone to water heated in excess of 104° F (40° C).
● Your phone is inoperable under water and should be dried as quickly
as possible when wet.
● Do not use the charger/USB port for charging, data transmission, etc.
until the phone is completely dry.
● Do not use the headset jack to plug in an accessory until the phone is
completely dry.
If your phone gets wet:
Water in the phone’s open microphone and speaker ports may affect
outbound audio quality and speaker performance. These are temporary
conditions and will subside once the phone is dry.
1. Do not open the battery door as this may allow water to get inside
the sealed portion of the phone.
2. Wipe the phone surfaces with a dry clean cloth.
3. Water in the phone’s open ports may affect sound quality and
should be removed with puffs of air directly into the ports. Phone
audio may not operate properly until ports are dry. Apply a dry
Important Safety Information
clean cloth to the open areas and crevices to remove the moisture
left on the phone: microphones; speakers; all physical keys;
headset jack cover; and charger/USB port cover.
4. Repeat the process until the phone is completely dry.
Charging
● Dry your phone with a clean cloth before charging.
● Do not touch the charger, charging cable, or charger/USB port with wet
hands. Doing so may cause electric shock, injury, or product failure.
● Do not charge your phone in a wet or damp place, such as in a
bathroom or near a kitchen sink.
Important Safety Information
Using Your Phone With a Hearing Aid Device
When some wireless phones are used with certain hearing devices
(including hearing aids and cochlear implants), users may detect a noise
which can interfere with the effectiveness of the hearing device.
Some hearing devices are more immune than others to this interference
noise, and phones also vary in the amount of interference noise they may
generate. ANSI standard C63.19 was developed to provide a
standardized means of measuring both wireless phone and hearing
devices to determine usability rating categories for both.
Ratings have been developed for mobile phones to assist hearing device
users in finding phones that may be compatible with their hearing device.
Not all phones have been rated for compatibility with hearing devices.
Phones that have been rated have a label located on the box. Your
DuraForce XD has an M3 and a T3 rating.
These ratings are not guarantees. Results will vary depending on the
user’s hearing device and the individual's type and degree of hearing
loss. If a hearing device is particularly vulnerable to interference noise;
even a phone with a higher rating may still cause unacceptable noise
levels in the hearing device. Trying out the phone with your hearing
device is the best way to evaluate it for your personal needs.
M-Ratings: Phones rated M3 or M4 meet FCC requirements for hearing
aid compatibility and are likely to generate less interference to hearing
devices than unrated phones. (M4 is the better/higher of the two ratings.)
T-Ratings: Phones rated T3 or T4 meet FCC requirements and are likely
to be more usable with a hearing device’s telecoil (“T Switch” or
“Telephone Switch”) than unrated phones. (T4 is the better/higher of the
two ratings. Note that not all hearing devices have telecoils in them.)
Note: This phone has been tested and rated for use with hearing aids
for some of the wireless technologies that it uses. However, there may
be some newer wireless technologies used in this phone that have
not been tested yet for use with hearing aids. It is important to try
the different features of this phone thoroughly and in different
locations, using your hearing aid or cochlear implant, to
determine if you hear any interfering noise. Consult your service
Important Safety Information
provider or the manufacturer of this phone for information on
hearing aid compatibility. If you have questions about return or
exchange policies, consult your service provider or phone retailer.
Hearing aid devices may also be measured for immunity to interference
noise from wireless phones and should have ratings similar to phones.
Ask your hearing healthcare professional for the rating of your hearing
aid. Add the rating of your hearing aid and your phone to determine
probable usability:
● Any combined rating equal to or greater than six offers excellent use.
● Any combined rating equal to five is considered normal use.
● Any combined rating equal to four is considered usable.
Thus, if you pair an M3 hearing aid with an M3 phone, you will have a
combined rating of six for “excellent use.” This is synonymous for T
ratings.
More information about hearing aid compatibility may be found at:
www.fcc.gov, www.fda.gov, and www.accesswireless.org.
Getting the Best Hearing Device Experience With
Your Phone
To further minimize interference, move the phone around to find the point
with least interference.
10 Important Safety Information
Caring for the Battery
The guidelines listed below help you get the most out of your battery’s
performance.
Protecting Your Battery
● Recently there have been some public reports of wireless phone
batteries overheating, catching fire, or exploding. It appears that
many, if not all, of these reports involve counterfeit or inexpensive,
aftermarket-brand batteries with unknown or questionable
manufacturing standards. Use only manufacturer-approved batteries
and accessories. Buying the right batteries and accessories is the best
way to ensure they’re genuine and safe.
● Do not disassemble or open, crush, bend or deform, or puncture or
shred the battery.
● Do not modify or remanufacture, attempt to insert foreign objects into
the battery, immerse or expose to water or other liquids, expose to
fire, explosion, or other hazard.
● Avoid dropping the phone or battery. If the phone or battery is
dropped, especially on a hard surface, and the user suspects damage,
take it to a service center for inspection.
● Improper battery use may result in a fire, explosion or other hazard.
● Do not short-circuit a battery or allow metallic conductive objects to
contact battery terminals.
● Keep the metal contacts on top of the battery clean.
● Battery usage by children should be supervised.
Important Safety Information 11
Charging
● Only use the battery with a qualified charger. Use of an unqualified
battery charger may present a risk of fire, explosion, leakage, or other
hazard. If you are unsure about whether a charger is qualified, contact
customer support.
● In order to avoid damage, charge the battery only in temperatures that
range from 32° F to 113° F (0° C to 45° C).
● Don’t use the battery charger in direct sunlight or in high humidity
areas, such as the bathroom.
● The battery may need recharging if it has not been used for a long
period of time.
● It’s best to replace the battery when it no longer provides acceptable
performance. It can be recharged hundreds of times before it needs
replacing.
● Replace the battery only with another qualified battery. Use of an
unqualified battery may present a risk of fire, explosion, leakage, or
other hazard. If you are unsure about whether a replacement battery is
compatible, contact customer support.
Common Causes of Battery Drain
● Playing games or using the Web.
● Keeping backlighting on.
● Operating the phone far away from a base station or cell site.
● Using data cables or accessories.
● Operating the phone when no service is available, or service is
available intermittently.
● High volume settings.
● Repeating sound, vibration, or lighted alerts.
12 Important Safety Information
Storing
● Don’t store the battery in high temperature areas for long periods of
time. It’s best to follow these storage rules:
▪ Less than one month:
-4° F to 140° F (-20° C to 60° C)
▪ More than one month:
-4° F to 113° F (-20° C to 45° C)
Disposal of Lithium Ion (Li-Ion) Batteries
● Promptly dispose of used batteries in accordance with local
regulations.
● Never dispose of the battery by incineration.
● Do not handle a damaged or leaking Li-Ion battery, as you can be
burned.
● For safe disposal options of your Li-Ion batteries, contact your nearest
authorized service center.
Special Note: Be sure to dispose of your battery properly. In some
areas, the disposal of batteries in household or business
trash may be prohibited.
Important Safety Information 13
Radio Frequency (RF) Energy
Understanding How Your Phone Operates
Your phone is a radio transmitter and receiver. When it’s turned on, it
receives and transmits radio frequency (RF) signals. Your phone is
designed to transmit just enough RF power to reach the network. The
system handling your call controls the RF power level. Depending on
network conditions, your phone may operate at an actual Specific
Absorption Rates (SAR) level below the maximum value specified. Your
phone is designed not to exceed the recommended international
guidelines for limits on RF exposure.
Knowing Radio Frequency Safety
The design of your phone complies with updated NCRP standards
described below.
In 1991–92, the Institute of Electrical and Electronics Engineers (IEEE)
and the American National Standards Institute (ANSI) joined in updating
ANSI’s 1982 standard for safety levels with respect to human exposure to
RF signals. More than 120 scientists, engineers and physicians from
universities, government health agencies and industries developed this
updated standard after reviewing the available body of research. In 1993,
the Federal Communications Commission (FCC) adopted this updated
standard in a regulation. In August 1996, the FCC adopted hybrid
standard consisting of the existing ANSI/IEEE standard and the guidelines
published by the National Council of Radiation Protection and
Measurements (NCRP).
Body-Worn Operation
To maintain compliance with FCC RF exposure guidelines, always use an
appropriate accessory if using the phone for body worn operations.
Accessories used with this phone for body worn operations must not
contain any metallic components and must provide at least 0.39 inches
(1.0 centimeter) separation distance between the user’s body and the
14 Important Safety Information
phone, including antennas. Body worn accessories that do not meet
these requirements may not comply with FCC RF exposure requirements
and should be avoided.
For more information about RF exposure, visit the FCC website at
www.fcc.gov.
Specific Absorption Rates (SAR) for Wireless Phones
The SAR value corresponds to the relative amount of RF energy absorbed
into the head of a user of a wireless handset.
The SAR value of a phone is the result of an extensive testing, measuring
and calculation process. It does not represent how much RF the phone
emits. All phone models are tested at their highest value in strict
laboratory settings. But when in operation, the SAR of a phone can be
substantially less than the level reported to the FCC. This is because of a
variety of factors including its proximity to a base station antenna, phone
design and other factors. What is important to remember is that each
phone meets strict federal guidelines. Variations in SARs do not
represent a variation in safety.
All phones must meet the federal standard, which incorporates a
substantial margin of safety. As stated above, variations in SAR values
between different model phones do not mean variations in safety. SAR
values at or below the federal standard of 1.6 W/kg are considered safe
for use by the public.
The highest reported SAR values of the DuraForce XD are:
Head: 0.93 W/kg
Body-worn: 1.19 W/kg
Hotspot: 1.19 W/kg
In the US, the SAR limit for mobile devices used by the public is 1.6
watts/kg (W/kg) averaged over 1 gram of tissue for the body or head.
Phone models may have different versions and more than one value.
Changes in design or components may occur over time and some
changes could affect SAR values. More information on the phone’s SAR
can be found on the following FCC website: http://fcc.gov/oet/ea/.
Important Safety Information 15
FCC Radio Frequency Emission
This phone meets the FCC Radio Frequency Emission Guidelines.
FCC ID number: V65E6790.
FCC Notice
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of
the following measures:
● Reorient the direction of the internal antennas.
● Increase the separation between the equipment and receiver.
● Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
● Consult the dealer or an experienced radio/TV technician for help.
16 Important Safety Information
Owner’s Record
The model number, regulatory number, and serial number are located on
the label inside the battery compartment. Record the serial number in the
space provided below. This will be helpful if you need to contact us about
your phone in the future.
Model: DuraForce XD
Serial No.:
Important: Carefully read our End User License Agreement at our
website http://www.kyoceramobile.com/support/
phone/ before using or otherwise accessing the
software or services provided with your Kyocera
device.
Important Safety Information 17
Manufacturer’s Warranty
Kyocera Communications Inc. (“KYOCERA”) offers you a limited warranty
that the enclosed product or products (the “Product”) will be free from
defects in material and workmanship for a period that expires one year
from the date of sale of the Product to you, provided that you are the
original end-user purchaser of the Product and provided that your
purchase was made from an authorized supplier. Transfer or resale of a
Product will automatically terminate warranty coverage with respect to
that Product.
This limited warranty is not transferable to any third party, including but
not limited to any subsequent purchaser or owner of the Product.
KYOCERA shall, at its sole and absolute discretion, either repair or
replace a Product (which unit may use refurbished parts of similar quality
and functionality) if found by KYOCERA to be defective in material or
workmanship, or if KYOCERA determines that it is unable to repair or
replace such Product, KYOCERA shall refund the purchase price for such
Product, provided that the subject Product (i) is returned, with
transportation prepaid, to a KYOCERA authorized service center within
the one year warranty period, and (ii) is accompanied by a proof of
purchase in the form of a bill of sale or receipted invoice which evidences
that the subject Product is within the one year warranty period (“Proof of
Purchase”). After the one year warranty period, you must pay all
shipping, parts and labor charges. This limited warranty does not cover
and is void with respect to the following: (i) Products which have been
improperly installed, repaired, maintained or modified (including the
antenna); (ii) Products which have been subjected to misuse (including
Products used in conjunction with hardware electrically or mechanically
incompatible or Products used with software, accessories, goods or
ancillary or peripheral equipment not supplied or expressly authorized by
KYOCERA for use), abuse, accident, physical damage, abnormal use or
operation, improper handling or storage, neglect, exposure to fire, water
(except for product certified for protection against water; see the Kyocera
product website for details on your Product) or excessive moisture or
dampness or extreme changes in climate or temperature; (iii) Products
operated outside published maximum ratings; (iv) cosmetic damage; (v)
Products on which warranty stickers or Product serial numbers have
18 Manufacturer’s Warranty
been removed, altered, or rendered illegible; (vi) customer instruction;
(vii) cost of installation, set up, removal or reinstallation; (viii) signal
reception problems (unless caused by defect in material or
workmanship); (ix) damage the result of fire, flood, acts of God or other
acts which are not the fault of KYOCERA and which the Product is not
specified to tolerate, including damage caused by mishandling and blown
fuses; (x) consumables (such as memory cards, fuses, etc.); (xi) third
party software or applications, data and equipment not originally supplied
with the Product; (xii) any Product in which the software has not been
updated to the current version; (xiii) any Product in which the operating
system has been unlocked (allowing installation of a third party operating
system); or (xiv) any Products which have been opened, repaired,
modified or altered by anyone other than KYOCERA or a KYOCERA
authorized service center. Before returning any Product for service, be
sure to back up data and remove any confidential, proprietary, or
personal information from the Product. KYOCERA is not responsible for
damage to or loss of any software, applications, data or removable
storage media.
USE ONLY APPROVED ACCESSORIES WITH KYOCERA PHONES. USE OF
ANY UNAUTHORIZED ACCESSORIES MAY BE DANGEROUS AND WILL
INVALIDATE THE PHONE WARRANTY IF SAID ACCESSORIES CAUSE
DAMAGE OR A DEFECT TO THE PHONE.
KYOCERA SPECIFICALLY DISCLAIMS LIABILITY FOR ANY AND ALL
DIRECT, INDIRECT, SPECIAL, GENERAL, PUNITIVE, EXEMPLARY,
AGGRAVATED, INCIDENTAL OR CONSEQUENTIAL DAMAGES, EVEN IF
ADVISED OF THE POSSIBILITY THEREOF, WHETHER FORESEEABLE OR
UNFORESEEABLE OF ANY KIND WHATSOEVER, INCLUDING BUT NOT
LIMITED TO LOSS OF PROFITS, UNANTICIPATED BENEFITS OR REVENUE,
ANTICIPATED PROFITS ARISING OUT OF USE OF OR INABILITY TO USE
ANY PRODUCT (FOR EXAMPLE, WASTED AIRTIME CHARGES DUE TO
THE MALFUNCTION OF A PRODUCT) OR CONTRIBUTION OR INDEMNITY
IN RESPECT OF ANY CLAIM RELATED TO A PRODUCT.
REPAIR OR REPLACEMENT OF A DEFECTIVE PRODUCT OR REFUND OF
THE PURCHASE PRICE RELATING TO A DEFECTIVE PRODUCT, AS
PROVIDED UNDER THIS WARRANTY, ARE YOUR SOLE AND EXCLUSIVE
REMEDIES FOR BREACH OF THE LIMITED WARRANTY, AND SUBJECT TO
Manufacturer’s Warranty 19
THIS WARRANTY, THE PRODUCTS ARE APPROVED AND ACCEPTED BY
YOU “AS IS”.
KYOCERA MAKES NO OTHER WARRANTIES, REPRESENTATIONS OR
CONDITIONS OF ANY KIND, ORAL OR VERBAL, EXPRESS OR IMPLIED,
STATUTORY OR OTHERWISE, WITH RESPECT TO THE PRODUCTS,
INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OR
CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE OR AGAINST INFRINGEMENT OR ANY IMPLIED WARRANTY OR
CONDITION ARISING OUT OF TRADE USAGE OR OUT OF A COURSE OF
DEALING OR COURSE OF PERFORMANCE. NO DEALER, DISTRIBUTOR,
AGENT OR EMPLOYEE IS AUTHORIZED TO MAKE ANY MODIFICATION OR
ADDITION TO THIS WARRANTY.
Some jurisdictions do not allow the exclusion or limitation of incidental or
consequential damages, or allow limitations on how long an implied
warranty lasts, so the above limitations or exclusions may not apply to
you. This limited warranty gives you specific legal rights, and you may
also have other rights which vary from jurisdiction to jurisdiction. For
warranty service information, please call the following telephone number
from anywhere in the continental United States and Canada: 1-800-3494478 or 858-882-1401.
20 Manufacturer’s Warranty
© 2015 Kyocera Corporation. All rights reserved. KYOCERA is a
registered trademark of Kyocera Corporation. All other trademarks are
the property of their respective owners.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract, Print high-res
Page Mode                       : UseOutlines
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Producer                        : Acrobat Distiller 9.5.5 (Windows)
Creator Tool                    : FrameMaker 10.0.2
Modify Date                     : 2015:08:18 10:23:59+08:00
Create Date                     : 2015:07:23 17:55Z
Metadata Date                   : 2015:08:18 10:23:59+08:00
Format                          : application/pdf
Title                           : AT&T_Kyocera_Charger_S&W_EN.book
Creator                         : 14Apr_Dell
Document ID                     : uuid:d30526f9-b92a-4408-be92-ab4d1c66beff
Instance ID                     : uuid:4d634e6a-6e48-43c7-9d21-0fc1bc336c24
Page Count                      : 24
Author                          : 14Apr_Dell
EXIF Metadata provided by EXIF.tools
FCC ID Filing: V65E6790

Navigation menu