Kyocera K5502 Tri-Band CDMA Phone User Manual 82 A6238 1EN

Kyocera Communications, Inc Tri-Band CDMA Phone 82 A6238 1EN

Contents

User Manual

User Guide 1user guideLuno™ S2100DRAFT
2Luno S2100 User GuideThis manual is based on the production version of the Kyocera S2100 phone. Software changes may have occurred after this printing. Kyocera reserves the right to make changes in technical and product specifications without prior notice.The Kyocera Communications Inc. (“KCI”) products described in this manual may include copyrighted KCI and third party software stored in semiconductor memories or other media. Laws in the United States and other countries preserve for KCI and third party software providers certain exclusive rights for copyrighted software, such as the exclusive rights to distribute or reproduce the copyrighted software. Accordingly, any copyrighted software contained in the KCI products may not be modified, reverse engineered, distributed or reproduced in any manner not permitted by law. Furthermore, the purchase of the KCI products shall not be deemed to grant—either directly or by implication, estoppel, or otherwise—any license under the copyrights, patents, or patent applications of KCI or any third party software provider, except for the normal, non-exclusive royalty-free license to use that arises by operation of law in the sale of a product.Kyocera is a registered trademark of Kyocera Corporation. Brick Attack and Race 21 are trademarks of Kyocera Wireless Corp. QUALCOMM is a registered trademark of QUALCOMM Incorporated.Openwave is a trademark of Openwave Systems Incorporated. eZiText is a registered trademark of Zi Corporation. TransFlash is a trademark of SanDisk Corporation. Bluetooth trademarks are owned by Bluetooth SIG, Inc. and used by Kyocera Communications Inc. under license.All other trademarks are the property of their respective owners.Copyright © 2010 Kyocera Corporation. All rights reserved. Ringer Tones Copyright © 2000-2010 Kyocera Corporation.82-A6238-1EN, Rev. 001IC NoticeOperation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. The term “IC” before the radio certification number only signifies that Industry Canada technical specifications were met.• This Class B digital apparatus complies with Canadian ICES-003.• Cet appareil numérique de la classe B est confome à la norme NMB-003 du Canada.FCC NoticeThis device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. To maintain compliance with FCC RF exposure guidelines, if you wear a phone on your body, use the Kyocera Communications Inc. (KCI) supplied and approved accessory designed for this product. Using accessories that are not supplied or approved by KCI may violate FCC RF exposure guidelines.Other accessories used with this device for body-worn operations must not contain any metallic components and must provide at least 15 mm separation distance including the antenna and the user’s body.THIS MODEL PHONE MEETS THE GOVERNMENT’S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES.Your wireless phone is a radio transmitter and receiver. It is designed and manufactured to not exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include DRAFTGeneric
User Guide 3a substantial safety margin designed to assure the safety of all persons, regardless of age and health.The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg.*Tests for SAR are conducted using standard operating positions specified by the FCC with the phone transmitting at its highest certified power level in all tested frequency bands.Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output.Before a phone model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the government-adopted requirement for safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the body) as required by the FCC for each model.Body-worn measurements differ among phone models, depending upon availability of accessories and FCC requirements. While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement for safe exposure.The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF emission guidelines. The highest reported SAR values of this phone are:Cellular CDMA mode (Part 22):Head: 1.01 W/kg; Body-worn: 0.72 W/kgPCS mode (Part 24):Head: 1.46 W/kg; Body-worn: 0.64 W/kgAWS mode (Part 27):Head: 0.99 W/kg; Body-worn: 0.78 W/kgSAR information on this model phone is on file with the FCC and can be found under the Display Grant section www.fcc.gov/oet/ea/fccid after searching on the FCC ID: OVF-K5502.Additional information on SAR can be found on the Cellular Telecommunications and Internet Association (CTIA) web-site at www.ctia.org.* In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue.Bluetooth® CertificationFor information about S2100 Bluetooth Certification, visit the Bluetooth Qualification Program Web site at www.bluetooth.org/tpg/listings.cfm.CautionThe user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the warranty and user’s authority to operate the equipment.Optimize your Phone’s PerformanceUse the instructions in this guide to learn how to optimize the performance and life of your phone and battery.Air BagsIf you have an air bag, DO NOT place installed or portable phone equipment or other objects over the air bag or in the air bag deployment area. If equipment is not properly installed, you and your passengers risk serious injury.Medical DevicesPacemakers—Warning to pacemaker wearers: Wireless phones, when in the ‘on’ position, have been shown to interfere with pacemakers. The phone should be kept at least six (6) inches away from the pacemaker to reduce risk.DRAFT
4The Health Industry Manufacturers Association and the wireless technology research community recommend that you follow these guidelines to minimize the potential for interference.• Always keep the phone at least six inches (15 centimeters) away from your pacemaker when the phone is turned on.• Do not carry your phone near your heart.• Use the ear opposite the pacemaker.• If you have any reason to suspect that interference is taking place, turn off your phone immediately.Hearing aids—Some digital wireless phones may interfere with hearing aids. In the event of such interference, you may want to call the customer service line to discuss alternatives.Other medical devices—If you use any other personal medical device, consult the manufacturer of the device to determine if it is adequately shielded from external RF energy. Your physician may be able to help you obtain this information.In health care facilities—Turn your phone off in health care facilities when instructed. Hospitals and health care facilities may be using equipment that is sensitive to external RF energy.Potentially unsafe areasPosted facilities—Turn your phone off in any facility when posted notices require you to do so.Aircraft—FCC regulations prohibit using your phone on a plane that is in the air. Turn your phone off or switch it to Airplane Mode before boarding aircraft.Vehicles—RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles. Check with the manufacturer of the device to determine if it is adequately shielded from external RF energy.Blasting areas—Turn off your phone where blasting is in progress. Observe restrictions, and follow any regulations or rules.Potentially explosive atmospheres—Turn off your phone when you are in any area with a potentially explosive atmosphere. Obey all signs and instructions. Sparks in such areas could cause an explosion or fire, resulting in bodily injury or death. Areas with a potentially explosive atmosphere are often, but not always, clearly marked.They include:• fueling areas such as gas stations• below deck on boats• transfer or storage facilities for fuel or chemicals• vehicles using liquefied petroleum gas, such as propane or butane• areas where the air contains chemicals or particles such as grain, dust, or metal powders• any other area where you would normally be advised to turn off your vehicle engineUse with CareUse only in normal position (to ear). Avoid dropping, hitting, bending, or sitting on the phone.Avoid Magnetic EnvironmentsKeep the phone away from magnets which can cause improper functioning of the phone.Keep Your Phone DryKeep the phone dry. Damage can result if the phone gets wet. Water damage is not covered under warranty.Resetting the PhoneIf the screen seems frozen and the keypad does not respond to key presses, reset the phone by completing the following steps:1. Remove the battery cover.2. Remove and replace the battery.If the problem persists, return the phone to the dealer for service.AccessoriesUse only Kyocera-approved accessories with Kyocera phones. Use of any unauthorized accessories may be dangerous and will void the phone warranty if said accessories cause damage or a defect to the phone.DRAFT
User Guide 5Radio Frequency (RF) EnergyYour telephone is a radio transmitter and receiver. When it is on, it receives and sends out RF energy. Your service provider’s network controls the power of the RF signal. This power level can range from 0.006 to 0.6 watts.In August 1996, the U.S. Federal Communications Commission (FCC) adopted RF exposure guidelines with safety levels for hand-held wireless phones. These guidelines are consistent with the safety standards previously set by both U.S. and international standards bodies in the following reports:• ANSI C95.1 (American National Standards Institute, 1992)• NCRP Report 86 (National Council on Radiation Protection and Measurements, 1986)• ICNIRP (International Commission on Non-Ionizing Radiation Protection, 1996)Your phone complies with the standards set by these reports and the FCC guidelines.E911 MandatesWhere service is available, this phone complies with the Phase I and Phase II E911 Mandates issued by the FCC.Hearing Aid Compatibility (HAC) with Mobile PhonesSome mobile phones and hearing devices (hearing aids and cochlear implants), when used together, result in buzzing, humming, or whining noises detected by the user.Some hearing devices are more immune than others to this interference noise, and phones also vary in the amount of interference they generate.The wireless telephone industry has developed ratings for some of their mobile phones, to assist hearing device users in finding phones that may be compatible with their hearing devices. Not all phones have been rated.Phones that are rated have the rating on their box or a label on the box. The ratings are not guarantees and results will vary depending on the user’s hearing device and hearing loss. If your hearing device happens to be vulnerable to interference, you may not be able to use a rated phone successfully. Trying out the phone with your hearing device is the best way to evaluate it for your personal needs.M-Ratings—Phones rated M3 or M4 meet FCC requirements and are likely to generate less interference to hearing devices than phones that are not labeled. M4 is the better/higher of the two ratings.T-Ratings—Phones rated T3 or T4 meet FCC requirements and are likely to be more usable with a hearing device’s telecoil (“T Switch” or “Telephone Switch”) than unrated phones. T4 is the better/higher of the two ratings. (Note that not all hearing devices have telecoils in them.)Hearing devices may also be measured for immunity to this type of interference. Your hearing device manufacturer or hearing health professional may help you choose the proper rating for your mobile phone. The more immune your hearing aid is, the less likely you are to experience interference noise from mobile phones.For more information about hearing aid compatibility, visit the FCC’s Consumer & Governmental Affairs Bureau Web site at www.fcc.gov/cgb/dro.Kyocera Communications Inc.www.kyocera-wireless.comTo purchase accessories, visit kyocera.superiorcommunications.comDRAFT
6DRAFT
User Guide 7Table of Contents1 Get Started . . . . . . . . . . . . . . . . . . . . . . . . 9Phone Battery . . . . . . . . . . . . . . . . . . . . . . . 9Phone Overview . . . . . . . . . . . . . . . . . . . . 11Main Menu . . . . . . . . . . . . . . . . . . . . . . . . 15Guide Conventions . . . . . . . . . . . . . . . . . . 162 Call Features . . . . . . . . . . . . . . . . . . . . . 17Power Phone Up. . . . . . . . . . . . . . . . . . . . 17Make Phone Calls. . . . . . . . . . . . . . . . . . . 17Answer Phone Calls . . . . . . . . . . . . . . . . . 17End Phone Calls . . . . . . . . . . . . . . . . . . . . 17Activate Voice Dialing. . . . . . . . . . . . . . . 18Volume Control . . . . . . . . . . . . . . . . . . . . 18Use Speed Dialing . . . . . . . . . . . . . . . . . . 18Emergency Services . . . . . . . . . . . . . . . . . 183 Text Entry . . . . . . . . . . . . . . . . . . . . . . . . 20Text Entry Modes . . . . . . . . . . . . . . . . . . . 20Text Entry Quick Reference. . . . . . . . . . . 224 Recent Calls. . . . . . . . . . . . . . . . . . . . . . 23Recent Calls Menu . . . . . . . . . . . . . . . . . . 23Work with Call Lists. . . . . . . . . . . . . . . . . 23Erase Call List Records . . . . . . . . . . . . . . 24Work with Call Timers. . . . . . . . . . . . . . . 25View Data Counter . . . . . . . . . . . . . . . . . . 255 Contacts . . . . . . . . . . . . . . . . . . . . . . . . . 26Contacts Menu . . . . . . . . . . . . . . . . . . . . . 26Access Contacts . . . . . . . . . . . . . . . . . . . . 26Add Contacts . . . . . . . . . . . . . . . . . . . . . . 27Use Contacts. . . . . . . . . . . . . . . . . . . . . . . 27Customize Contacts . . . . . . . . . . . . . . . . . 28Erase Contacts . . . . . . . . . . . . . . . . . . . . . 30Contact Groups . . . . . . . . . . . . . . . . . . . . . 30Speed Dial List . . . . . . . . . . . . . . . . . . . . . 32Voice Dial List . . . . . . . . . . . . . . . . . . . . . 32Check Contacts . . . . . . . . . . . . . . . . . . . . .326 Media Gallery. . . . . . . . . . . . . . . . . . . . . 33Media Gallery Menu . . . . . . . . . . . . . . . . .33Images . . . . . . . . . . . . . . . . . . . . . . . . . . . .33Sounds . . . . . . . . . . . . . . . . . . . . . . . . . . . .34Media File Options. . . . . . . . . . . . . . . . . . .34Erase Media Files. . . . . . . . . . . . . . . . . . . .367 Settings . . . . . . . . . . . . . . . . . . . . . . . . . 37Settings Menu . . . . . . . . . . . . . . . . . . . . . .37Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . .38Convenience. . . . . . . . . . . . . . . . . . . . . . . .39Display . . . . . . . . . . . . . . . . . . . . . . . . . . . .42Sounds . . . . . . . . . . . . . . . . . . . . . . . . . . . .44Voice Features . . . . . . . . . . . . . . . . . . . . . .45Accessories. . . . . . . . . . . . . . . . . . . . . . . . .46Network . . . . . . . . . . . . . . . . . . . . . . . . . . .47Security . . . . . . . . . . . . . . . . . . . . . . . . . . .49Check Memory Status . . . . . . . . . . . . . . . .49Phone Info . . . . . . . . . . . . . . . . . . . . . . . . .498 Messaging . . . . . . . . . . . . . . . . . . . . . . . 50Messaging Menu . . . . . . . . . . . . . . . . . . . .50Send Messages. . . . . . . . . . . . . . . . . . . . . .51Manage Received Messages . . . . . . . . . . .56Manage Voicemail . . . . . . . . . . . . . . . . . . .58Manage Sent Messages . . . . . . . . . . . . . . .58Manage Browser Alerts . . . . . . . . . . . . . . .59Message Settings . . . . . . . . . . . . . . . . . . . .59Erase Messages . . . . . . . . . . . . . . . . . . . . .62Check Message Count . . . . . . . . . . . . . . . .629 Camera. . . . . . . . . . . . . . . . . . . . . . . . . . 63Camera Tips. . . . . . . . . . . . . . . . . . . . . . . .63Take a Picture. . . . . . . . . . . . . . . . . . . . . . .63Other Camera Options . . . . . . . . . . . . . . . .63DRAFT
810 Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . .65Tools Menu . . . . . . . . . . . . . . . . . . . . . . . .65Voice Memo . . . . . . . . . . . . . . . . . . . . . . .65Scheduler . . . . . . . . . . . . . . . . . . . . . . . . . .66Alarm Clock. . . . . . . . . . . . . . . . . . . . . . . .68Use Tip Calculator. . . . . . . . . . . . . . . . . . .69Use Calculator . . . . . . . . . . . . . . . . . . . . . .69Use Timer . . . . . . . . . . . . . . . . . . . . . . . . .70Use Stopwatch . . . . . . . . . . . . . . . . . . . . . .70World Clock. . . . . . . . . . . . . . . . . . . . . . . .70Memopad. . . . . . . . . . . . . . . . . . . . . . . . . .7111 Browser . . . . . . . . . . . . . . . . . . . . . . . . . .72Launch Browser. . . . . . . . . . . . . . . . . . . . .72Browse the Web. . . . . . . . . . . . . . . . . . . . .72Add a Bookmark . . . . . . . . . . . . . . . . . . . . 7212 Downloads . . . . . . . . . . . . . . . . . . . . . . .73How does BREW Work?. . . . . . . . . . . . . .73Download an Application . . . . . . . . . . . . .73Access Help for Downloads . . . . . . . . . . .7313 Voice Commands . . . . . . . . . . . . . . . . . .74Call a Contact . . . . . . . . . . . . . . . . . . . . . .74Call a Number . . . . . . . . . . . . . . . . . . . . . .74Use a Shortcut . . . . . . . . . . . . . . . . . . . . . .74Find a Contact . . . . . . . . . . . . . . . . . . . . . .7514 Get Help. . . . . . . . . . . . . . . . . . . . . . . . . .76User Guide. . . . . . . . . . . . . . . . . . . . . . . . .76Customer Support . . . . . . . . . . . . . . . . . . .76Qualified Service . . . . . . . . . . . . . . . . . . . .76Phone Accessories . . . . . . . . . . . . . . . . . . .76Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77DRAFT
User Guide 91 Get StartedPhone BatteryInstall the Battery1. Hold the phone face down.2. Find notch directly below the back cover. It is square. Using your thumbnail, lift the cover to remove.3. Place the battery in the battery casing with the metal contacts facing toward the bottom of the phone. The metal contacts of the battery must make contact with the metal contacts of the battery casing.4. Replace the battery door by lining up the notches with the openings at the top and on each side of the battery casing.5. Snap the cover into place.Charge the Battery1. Connect the AC adapter to the Micro-USB jack on the side of the phone.2. Plug the adapter into a wall outlet.The battery icon in the upper-right corner of the screen tells you whether the phone is:– Charging (the icon is animated)– Partially charged – Fully charged You must have at least a partial charge in the battery to make or receive calls. You can safely recharge the battery at any time, even if it has a partial charge.Note: Before removing the battery, make sure the phone is powered off.DRAFT
10 Phone BatteryBattery Safety Guidelines• Do not disassemble or open the battery.• Do not crush, bend, deform, puncture, or shred the battery.• Do not attempt to insert foreign objects into the battery.• Do not immerse the battery or expose it to water or other liquids. Even if a battery appears to dry out and operate normally, internal parts can slowly corrode and pose a safety hazard.• Always keep the battery between 15 °C and 25 °C (59 °F and 77 °F). Do not expose the battery to extremes of temperature (heat or cold), fire, or other hazards such as a cooking surface, iron, or radiator.• Never use any damaged battery.• Only use the battery for its intended phone.• Only use the battery with a qualified charger. Use of an unqualified battery charger may present a risk of fire, explosion, leakage, or other hazard. If you are unsure about whether a charger is qualified, contact customer support.• Do not short-circuit the battery or allow metallic conductive objects—such as keys, coins, or jewelry—to contact the battery’s terminals.• Replace the battery only with another qualified battery. Use of an unqualified battery may present a risk of fire, explosion, leakage, or other hazard. If you are unsure about whether a replacement battery is compatible, contact customer support.• Promptly dispose of used batteries in accordance with local regulations and recycle if possible. Do not dispose as household waste.• Supervise all battery usage by children.• Avoid dropping the phone or battery. If the phone or battery is dropped, especially on a hard surface, an internal short-circuit can occur and pose a safety hazard. If you suspect battery damage, take it to a service center for inspection.• Improper battery use may result in a fire, explosion, or other hazard.Common Causes of Battery Drain• Playing games or using the Web.• Taking pictures with the flash on.• Keeping backlighting on.• Operating when far away from a base station or cell site.• Using data cables or accessories.• Operating when no service is available, or service is available intermittently.• High earpiece and ringer volume settings.• Repeating sound, vibration, or lighted alerts.DRAFT
User Guide 11Phone OverviewGet to Know Your PhoneThe phone is shown here in the open position.1. Earpiece speaker.2. Home screen.3.Left softkey selects items that appear on the lower left of the display. At the home screen, you can select Messaging.4.Navigation key scrolls through lists and text entry fields and accesses the following shortcuts from the home screen.– Scroll left to launch Browser.– Scroll right to go to Tools > Voice Memo.– Scroll up to create a custom menu shortcut.– Scroll down to go to Recent Calls > All.5.Speakerphone key activates the speakerphone and answers incoming calls.6.Send key starts or answers a call. Press once to display the recent calls list or twice to redial the last number dialed. Press and hold to activate voice commands.7. Keypad for entering numbers, letters, or symbols.8.* Shift key changes the text mode in text entry.9.Right softkey selects items that appear on the lower right of the display. At the home screen, you can select Contacts.10.OK key selects a menu item or option. At the home screen, you go to the main menu when you press the OK key. 11.Back key erases characters in text entry and returns you to the previous screen when navigating through menus.12.End key turns the phone on and off, ends a call or browser session, and returns you to the home screen.13.# Space key enters a space during text entry. Press and hold to activate or deactivate Silent mode.14.0 Next key cycles through word choices during text entry.15. Microphone.OK12ABC DEFJKLGHI. ,MNOTUVNEXTSPACESHIFTPQRS WXYZ34567809*#1253 94611101214131578DRAFT
12 Phone OverviewThe phone is shown here in the closed position. When the phone is closed, the keys are locked to prevent accidental key presses.1. Jack for a hands-free headset (sold separately).2. Camera lens.3.Volume key raises or lowers ringer volume.4.Camera key activates camera mode. Press and hold the Camera key to activate camera mode.5. External screen displays time and phone status.6. Jack for AC adapter (included) and Micro-USB cable (sold separately).7. Speakerphone speaker.Warning: Inserting an accessory into the incorrect jack will damage the phone.Attach the Lanyard1. Hold the phone face down.2. Find notch directly below the back cover. It is square. Using your thumbnail, lift the cover to remove.3. Thread the lanyard around the notch on the upper left side.4. Replace the battery door by lining up the notches with the openings at the top and on each side of the battery casing.5. Snap the cover into place.6314257DRAFT
User Guide 13Screen IconsThese icons may appear on your phone’s screen.The phone is operating in IS2000 (1X) digital mode.The phone is in airplane mode.The alarm clock is set.The phone is set to auto answer.The battery is fully charged. The more black bars, the greater the charge.The phone is transferring data with Bluetooth.A headset or other hands free device is in operation.A headset or other hands free device is transferring data.Bluetooth wireless technology is disabled (Off).Bluetooth wireless technology is enabled (On).The phone is in camera mode.The battery will not charge.Data service is available and active on your phone. Check with your service provider for availability.Data service is available, but the phone is dormant.(blinking) The phone is receiving high-speed data.(blinking) The phone is sending high-speed data.The phone is operating in IS95 digital mode.Content is DRM protected.Position location is set to emergency services only.Position location is set to your service provider and to emergency services.The phone has a high speed data connection.A call is in progress.The phone is set to light up instead of ring.New message.New photo and text message.New photo and voice message.New photo message.New photo, voice and text message.New text message.New voice and text message.New voice message.DRAFT
14 Phone OverviewThe phone is not receiving a signal. You cannot make or receive calls.The phone is roaming outside of its home service area.The phone is in privacy mode or is accessing a secure Web site.The phone is receiving a signal. You can make and receive calls. Fewer bars indicate a weaker signal.The speaker phone is turned on.A T-coil hearing aid is in operation.A traffic channel is active.The phone is in TTY device mode.The phone is set to vibrate or to vibrate and then ring.DRAFT
User Guide 15Main MenuFrom the home screen, press the OK key to access the main menu.Idle State > Level 1 > Level 2Menu Recent CallsAccess these options: All, Incoming, Outgoing, Missed, Erase Call List, Call Timers, and Kilobyte Counter.ContactsAccess these options: View All, Add New, Groups, Speed Dial List, Voice Dial List, Erase Contacts, and Contacts Count.Media GalleryAccess these options: Images, Sounds, and Delete All.SettingsAccess these options: Bluetooth, Convenience, Display, Sounds, Voice Features, Accessories, Network, Security, Memory Status, and Phone Info.MessagingAccess these options: New Text Msg, New Pic Msg, Voicemail, Inbox, Browser Alerts, Sent Msgs, Outbox, Saved Msgs, Drafts, Msg Settings, Erase Msgs, and Message Count.CameraTake a picture.ToolsAccess these options: Voice Memo, Scheduler, Alarm Clock, Tip Calculator, Calculator, Timer, Stopwatch, World Clock, and Memopad.BrowserBrowse the web.DownloadsDownload an application.Note: The menu items on your phone can change depending on the options provided by your service provider. Check with your service provider.DRAFT
16 Guide ConventionsGuide ConventionsIn this guide, the following conventions are used when describing phone features.Select means to press the Left softkey, Right softkey or OK key to select an item seen on the display. For example, “Select Menu” tells you to physically press the left softkey to choose Menu from the display.Press means to press a phone key. For example, “Press the Send key to make a phone call” tells you to physically press the Send key on your phone.Scroll means to use the Navigation key to move through a list on the display. For example, “Scroll through your contacts list to choose a contact” means to physically press the Navigation key up or down to scroll through the list on the display.> (greater than symbol) tells you to select an option from a menu or list. For example, “Menu > Settings” means to:1. Press the left softkey to select Menu.2. Scroll to the Settings option.3. Press the OK key to select Settings.DRAFT
User Guide 172 Call FeaturesThis section describes the basic features related to calls.Power Phone Up• To turn your phone on, press and hold the End key until the phone display lights up.• To turn your phone off, press and hold the End key until the phone plays a short musical sound and turns off.Make Phone CallsMake sure you are in an area where a signal can be received. Look for the signal strength icon on the home screen. The more bars, the stronger the signal. If there are no bars, move to where the signal strength is better.When the phone has been idle for a time, it cycles into power save mode. Press any key to return to normal operating mode.There are several ways you can make a phone call.Call Using a Number1. Enter a phone number.2. Press the Send key.Call Using a Contact1. From View All, highlight a contact.2. Press the Send key.Call Using Voice CommandsYou can use voice commands to call a contact from your voice dial list or to dial a phone number. For more information, see “Voice Commands” on page 74.Redial a Number1. Press the Send key to open your call history.2. Highlight a phone number or contact and press the Send key.Note: To redial the last number called, received or missed, press the Send key twice.Answer Phone CallsWhen a call comes in, the phone rings, vibrates, or lights up. The phone number of the caller also appears if it is not restricted. If the number is stored in your contacts list, the contact’s name appears. There are several ways you can answer a phone call.Answer Using EarpiecePress the Send key.Answer Using SpeakerphonePress the Speakerphone key.End Phone CallsPress the End key.DRAFT
18 Activate Voice DialingActivate Voice Dialing1. Press and hold the Send key.2. Follow the prompts.For more information, see “Voice Commands” on page 74.Volume ControlAdjust Volume during a CallPress the Volume key up or down to adjust the earpiece volume during a call. Use the SpeakerphoneYour phone has a built-in speakerphone.• To turn on the speakerphone, press the Speakerphone key. The speakerphone icon appears on the home screen when the speakerphone is on.• To turn off the speakerphone, press the Speakerphone key again.Note: If you press the Speakerphone key during an incoming call, you will answer the call.Silence an Incoming Call• To silence the phone without answering the call, press the Back key or press the Volume key up or down.• To silence the phone and answer the call, press the Back key or press the Volume key up or down and then press the Send key.Use Speed DialingSpeed dialing allows you to assign a one- or two-digit shortcut to a contact. Before you can use speed dialing you must save a phone number as a contact and assign a speed dial location to it. See “Assign Speed Dials to Contacts” on page 29. To call a contact that has a speed dial location:1. Enter the one- or two-digit speed dial location.2. Press the Send key.Emergency ServicesCall Emergency ServicesYou can call an emergency code even if your phone is locked or your account is restricted. When you call, your phone enters emergency mode. This enables the emergency service exclusive access to your phone to call you back, if necessary. To make or receive regular calls after dialing the code, you must exit this mode.To dial an emergency code:1. Enter the 3-digit emergency code.2. Press the Send key.Note: Regardless of the 3-digit emergency code (911, 111, 999, 000, etc.), your phone operates as described above.DRAFT
User Guide 19Exit Emergency ServicesWhen you have completed the emergency call:1. Select Exit.2. Select Exit again to confirm your choice.Note: To determine who has access to your location, see “Set Location Information” on page 48.DRAFT
20 Text Entry Modes3 Text EntryYou can enter letters, numbers, and symbols in contacts, text messages, and your banner.Text Entry ModesThe text entry screen has the following features:1. The number of remaining characters you can type.2. Text entry fields.3. Current capitalization setting.4. Current text entry mode.Note: The entry mode defaults depending on the task you are doing. For example, when entering a phone number, you are in a number mode. When entering a name for a contact, you are in a letter mode.Enter Numbers with Number KeypadFrom the text entry field, select Options > Numbers Only to enter a number when you press a key once.The icon indicates you are in Numbers Only input mode. Press and hold the * Shift key to switch input modes.Enter Letters with Number KeypadFrom the text entry field, select Options > Normal Alpha to enter letters. You can enter text in the following ways:• To enter a letter, press a key once for the first letter, twice for the second letter, and so on. If your phone is set to Spanish, accented letters are available. Wait for the cursor to move right and enter the next character. Press the # Space key to enter a space.• To change case mode for a single letter, press that key until you see the letter case you want. To change the case mode, press the * Shift key.• To enter a number, press and hold a number key until the number appears on the screen.The icon indicates you are in Normal Alpha input mode. Press and hold the * Shift key to switch input modes.DRAFT
User Guide 21Rapid Entry with Number KeypadFrom the text entry field, select Options > Rapid Entry to check words you are trying to spell against a dictionary of common words. You can enter text in the following ways:• To enter words, press a key once. For example, to enter the word “Glow” press the 4 > 5 > 6 keys. If the word doesn’t match what you want, press 0 Next key to look at other word matches. When you see the word you want, scroll right.• To change case mode, press the * Shift key.• To enter a number, press and hold a number key until the number appears on the screen.The icon indicates you are in Rapid Entry input mode. Press and hold the * Shift input key to switch input modes.Enter Symbols with Number KeypadWhile entering text in Normal Alpha mode, you can enter symbols by pressing the 1 key until you see the symbol you want. Using this method, you have access to the following symbols:. @ ? ! - , & : ‘To access the full set of symbols:1. From the text entry field, select Options > Add Symbols.2. Scroll up or down to view the list of symbols.3. Press the number key corresponding to the symbols to enter it.DRAFT
22 Text Entry Quick ReferenceText Entry Quick ReferenceThis table gives instructions for entering letters, numbers, and symbols.To... Do this...Enter a letterUse Normal Alpha mode and press a key until you see the letter your want.Enter a numberUse Numbers Only mode and press a key.Enter a symbolUse Normal Alpha mode and press the 1 key until you see the symbol you want.Enter a spacePress the # Space key.Erase a characterPress the Back key.Erase all charactersPress and hold the Back key.Move the cursor right or leftScroll left or right.Move the cursor up or downScroll up or down.Change input modePress and hold the * Shift key.Change case modePress the * Shift key.Capitalize any letterIn Normal Alpha mode, press the * Shift key. Choose uppercase.Lowercase any letterIn Normal Alpha mode, press the * Shift key. Choose lowercase.Initial capsIn Normal Alpha mode, press the * Shift key. Choose sentence case.Select options on the bottom of the screenPress the appropriate left or right softkey.DRAFT
User Guide 234 Recent CallsRecent Calls MenuSelect Recent Calls from the main menu to access the following functions:Work with Call ListsReturn Any Call1. From All, highlight a number.2. Press the Send key to call the number or select Options to access more features.This list contains all calls made and received.Return a Received Call1. From Incoming, highlight a number.2. Press the Send key to call the number or select Options to access more features.This list contains all calls received.Return an Outgoing Call1. From Outgoing, highlight a number.2. Press the Send key to call the number or select Options to access more features.This list contains all calls you have made.Level 1 > Level 2 > Level 3Recent Calls AllSee a list of all voice calls.IncomingSee a list of all voice calls you have received.OutgoingSee a list of all voice calls you have made.MissedSee a list of all voice calls you have missed.Erase Call ListAccess these options: All, Incoming, Outgoing, and Missed.Call TimersAccess these options: Life Timer, Recent Calls, Home Calls, Roam Calls, Incoming Calls, and Outgoing Calls.Kilobyte CounterSee how much data you have sent and received.DRAFT
24 Erase Call List RecordsReturn a Missed Call1. From Missed, highlight a number.2. Press the Send key to call the number or select Options to access more features.This list contains all calls you received, but did not answer.Manage a Missed Call AlertWhen you have missed a call, a “Missed Call” alert appears on your screen. You can do one of the following:• To clear the screen, select Dismiss.• To view the call details, select View or press the OK key.• To return the call, select View and press the Send key.Call List OptionsSave Number from Call List1. At a call list, highlight a number.2. Select Options > Save.3. Select Save New Contact to create a new contact or Add to Existing to add a number to an existing contact.View Contact from Call List1. At a call list, highlight a contact.2. Select Options > View to see the contact details screen.Send Text Message from Call List1. At a call list, highlight a contact.2. Select Options > Send Text Msg.3. Complete your text message and select Send.Send Multimedia Message from Call List1. At a call list, highlight a contact.2. Select Options > Send Pic Msg.3. Complete your multimedia message and select Send.Erase Call List RecordsErase a Single Record1. At a call list, highlight a contact.2. Select Options > Erase Record > Yes.Erase a Call ListFrom Erase Call List, select a call list to erase records from. For example to erase all records from the incoming call list, select Incoming > Yes.Erase All Call ListsFrom Erase Call List, select All > Yes to erase all records from all call lists.DRAFT
User Guide 25Work with Call TimersView All Calls TimerSelect Life Timer to view the number of calls and the total call time. Select Done when finished.This timer tracks all calls made and received for life of the phone and cannot be reset.View Recent Calls TimerSelect Recent Calls to view the number of calls and the total call time. Select Done when finished.This timer tracks all calls made and received since you last reset the timer. To reset this timer to zero, select Reset > Yes.View Home Calls TimerSelect Home Calls to view the number of calls and the total call time. Select Done when finished.This timer tracks all calls made and received in your home network since you last reset the timer. To reset this timer to zero, select Reset > Yes.View Roam Calls TimerSelect Roam Calls to view the number of calls and the total call time. Select Done when finished.This timer tracks all roaming calls made and received since you last reset the timer. To reset this timer to zero, select Reset > Yes.Your phone can alert you with a short beep ten seconds before each minute passes during a call. For more information, see “Enable Minute Alert” on page 41.View Incoming Calls TimerSelect Incoming Calls to view the number of calls and the total call time. Select Done when finished.This timer tracks all calls received since you last reset the timer. To reset this timer to zero, select Reset > Yes.View Outgoing Calls TimerSelect Outgoing Calls to view the number of calls and the total call time. Select Done when finished.This timer tracks all calls made since you last reset the timer. To reset this timer to zero, select Reset > Yes.View Data CounterSelect Kilobyte Counter to view the amount of kilobytes sent during data calls. Select Done when finished.This timer tracks kilobytes sent during data calls made, data calls received, and for the life of the phone. To reset the data counter to zero, select Options > Reset > Yes.DRAFT
26 Contacts Menu5ContactsUse Contacts to store information about a person or company.Contacts MenuSelect Contacts from the main menu to access the following functions:Access ContactsAccess Contacts List1. From View All, enter the first letter of your desired contact and scroll to highlight it. 2. Do one of the following:–Press the Send key to call the contact.–Press the OK key to view the contact’s details.– Select New to create a new contact.– Select Options to access more functions.View Contact Details1. From View All, select a contact.2. At the contact details screen, highlight a number, address or note.3. Select the detail you want to view. For example, to view a phone number, select Options > View Number.Level 1 > Level 2 > Level 3Contacts View AllAccess your existing contacts list.Add NewAdd a new entry to your contacts list.GroupsView your groups of contacts.Speed Dial ListView your contacts assigned with speed dials.Voice Dial ListView your contacts assigned with voice dials.Erase ContactsAccess these options: Contacts Only, Groups Only, Erase All.Contacts CountCheck how much contact space you have used.DRAFT
User Guide 27Use Frequent ListWith Frequent List enabled, you can view 15 of your most frequently called contacts. See “Enable Frequent List” on page 41.Use Fast FindWith Fast Find enabled, you can press one or two keys to view closer matches in your contacts list. See “Call Contact using Fast Find” on page 41.Add ContactsAdd Contacts from Home Screen1. From the home screen, enter a phone number to save (include the area code).2. Select Save > Save New Contact.3. Enter a name for the contact.4. Enter additional phone numbers, email addresses, and other contact details. (Scroll up or down to move through the contact fields.)5. When done, select Save.Add Contacts from Contacts Menu1. From Add New, enter a name for the contact. Scroll down to the next field when done.2. Enter a primary number for the contact.3. Enter additional phone numbers, email addresses, and other contact details. (Scroll up or down to move through the contact fields.)4. When done, select Save.Add a Code or ExtensionWhen saving the phone number of an automated service, you may include a pause for dialing an extension.1. From the home screen, enter a phone number.2. Select Options and a type of pause:–Time Pause causes the phone to stop dialing for two seconds.–Hard Pause causes the phone to wait until you select Release while making the call.3. Enter the remaining numbers and select Save > Save New Contact.4. Complete the contact information and select Save.Use ContactsCall Contacts1. From View All, select a contact.2. At the contact details screen, highlight a number.3. Select Options > Call.DRAFT
28 Customize ContactsSend a Text Message to Contacts1. From View All, select a contact.2. At the contact details screen, highlight a number or email address.3. Select Options > Send Text Msg.4. Complete your text message and select Send.Send a Multimedia Message to Contacts1. From View All, select a contact.2. At the contact details screen, highlight a number or email address.3. Select Options > Send Pic Msg.4. Complete your multimedia message and select Send.Send a Contact vCard1. From View All, select a contact.2. At the contact details screen, highlight the contact name.3. Select Options > Send as vCard > Via MMS Msg (to attach to a multimedia message), Via Bluetooth (to send to a Bluetooth-enabled device), or To Printer (to print on a Bluetooth-enabled device).4. Complete the appropriate task to send the contact information.Note: If your phone has no Bluetooth feature, you may send the contact information with a message only.Customize ContactsEdit Contact Details1. From View All, select a contact.2. At the contact details screen, select Edit.3. Enter additional phone numbers, email addresses, and other contact details. (Scroll up or down to move through the contact fields.)4. When done, select Save.Assign Number Types1. From View All, select a contact.2. At the contact details screen, select Edit.3. Press down twice to scroll to the number type dropdown and press the OK key.4. Select a number type. The appropriate icon appears next to the number in your contacts list.5. Select Save.Assign Ringers to Contacts1. From View All, select a contact.2. At the contact details screen, highlight the contact name.3. Select Options > Ringer > Assign Ringer and a ringer from the list. (Scroll to play the ringers.)DRAFT
User Guide 29Assign Message Tones to Contacts1. From View All, select a contact.2. At the contact details screen, highlight the contact name.3. Select Options > Msg Tone > Assign Msg Tone and a ringer from the list. (Scroll to play the ringers.)Assign Pictures to Contacts1. From View All, select a contact.2. At the contact details screen, highlight the contact name.3. Select Options > Picture > Assign Picture to assign a picture.Add a Prefix to Phone NumbersUse Prepend to add a prefix, such as an area code, to a phone number:1. From View All, select a contact.2. At the contact details screen, highlight a number.3. Select Options > Prepend to enter the prefix at the beginning of the number.4. Select Save.Assign Speed Dials to Contacts1. From View All, select a contact.2. At the contact details screen, highlight a number.3. Select Options > Add Speed Dial.4. Select a location from the list to assign the speed dial number.Change Primary NumbersWhen a contact has more than one number, the first number becomes the primary number by default. To change the contact’s primary number:1. From View All, select a contact.2. At the contact details screen, highlight a number.3. Select Options > Primary Number > Yes.Add Contacts to Groups1. From View All, select a contact.2. At the contact details screen, highlight a number or email address.3. Select Options > Add to Group.4. Select groups from the list provided. A checkmark appears next to each selection. You can also remove a checkmark.5. When finished, select Done.Visit Web Addresses1. From View All, select a contact.2. At the contact details screen, highlight a Web address.3. Select Options > Launch Web.DRAFT
30 Erase ContactsErase ContactsErase Contact Details1. From View All, select a contact.2. At the contact details screen, highlight a number, address or note.3. Select your desired erase option and then select Yes. For example, to erase an address, select Options > Erase Address > Yes.Erase an Entire Contact1. From View All, select a contact.2. At the contact details screen, highlight the contact name.3. Select Options > Erase Contact > Yes to erase the entire contact.Erase All ContactsFrom Erase Contacts, select Contacts Only > Yes > Yes to erase all your contacts.Note: You cannot recover deleted information.Erase All Contacts and GroupsFrom Erase Contacts, select Erase All > Yes > Yes to erase all your contacts and groups.Note: You cannot recover deleted information.Contact GroupsYou can assign your contacts to groups. Your phone comes with default groups. You can also create your own groups.View Groups1. Select Groups to view your preloaded groups, followed by the custom groups you have created. 2. Highlight a group and do one of the following:–Press the OK key to view the group details.–Select New to create a new group.–Select Options to access more functions.Create a New Group1. From Groups, select New.2. Enter a name for the group and select Next.3. Select contacts from the list provided. A checkmark appears next to each selection. You can also remove checkmarks.4. When finished, select Done.Your new group appears the next time you view your groups list.Send Text Messages to Groups1. From Groups, highlight a group.2. Select Options > Send Text Msg.3. Complete your text message and select Send.Send Multimedia Messages to Groups1. From Groups list, highlight a group.2. Select Options > Send Pic Msg.3. Complete your multimedia message and select Send.DRAFT
User Guide 31Add or Remove Contacts from Groups1. From Groups, highlight a group.2. Select Options > Edit.3. If you are modifying a group you created, select Next. Otherwise, go to the next step.4. Select contacts from the list provided. A checkmark appears next to each contact in the group. Press the OK key to add or remove checkmarks.5. When finished, select Done.Assign Ringers to Groups1. From Groups, select a group.2. At the group details screen, scroll to the group name.3. Select Options > Ringer > Assign Ringer and a ringer from the list. (Scroll to play the ringers.)Assign Message Tones to Groups1. From Groups, select a group.2. At the group details screen, scroll to the group name.3. Select Options > Msg Tone > Assign Msg Tone and a ringer from the list. (Scroll to play the ringers.)Assign Pictures to Groups1. From Groups, select a group you have created.2. At the group details screen, scroll to the group name.3. Select Options > Picture > Assign Picture to assign a picture.Send a Group vCard1. At the Groups list, highlight a group.2. Select Options > Send > Via Bluetooth.3. Complete the appropriate task to send the group information.Create a Message GroupYou can create a group specifically for messaging, based on a contact group.1. From Groups, highlight a group.2. Select Options > Create Msg Group.3. Modify the name for the group and select Next.4. Select contacts from the list provided. A checkmark appears next to each contact in the group. Press the OK key to add or remove checkmarks.5. When finished, select Done.Your new message group appears the next time you view your message groups list.Erase a Group1. From Groups, highlight a group.2. Select Options > Erase > Yes.DRAFT
32 Speed Dial ListErase All GroupsFrom Erase Contacts, select Groups Only > Yes > Yes to erase all your groups.Note: You cannot recover deleted information or erase preloaded groups.Speed Dial ListAssign Speed Dial Numbers1. From Speed Dial List, highlight an unassigned number (marked as empty).2. Select Assign.3. At the contacts list, select a contact.4. At the contact details screen, select a phone number.Clear Speed Dial Numbers1. From Speed Dial List, highlight an assigned number.2. Select Erase > Yes.Voice Dial ListEnable Voice Dial TagsYour phone creates a voice dial tag for each contact that has a name field which is not blank or a name that is more than five syllables. You can enable or disable the voice dial tags associated with your contacts.1. From Voice Dial List, press the OK key to add or remove checkmarks. A checkmark appears next to each enabled voice dial. (Scroll through the list to play the voice dial tags.)2. When done, select Save.Search Contact VoiceYou can use voice commands to find a contact in your voice dial list. For more information, see “Find a Contact” on page 75.Check ContactsSelect Contacts Count to check how many contacts you have stored.DRAFT
User Guide 336 Media GalleryUse Media Gallery to retrieve and playback media files and other downloads.Media Gallery MenuSelect Media Gallery from the main menu to access the following functions:ImagesSend a Picture1. From Camera Pictures, select a picture.2. Select Send > Via EMS Msg (to attach to an enhanced message), Via MMS Msg (to attach to a multimedia message), Via Bluetooth (to send to a Bluetooth-enabled device), or To Printer (to print on a Bluetooth-enabled device).3. Complete the appropriate task.Note: If your phone has no Bluetooth feature, you may send the file with a message only.Send an Image1. From Saved Images, select an image.2. Select Send > Via EMS Msg (to attach to an enhanced message), Via MMS Msg (to attach to a multimedia message), Via Bluetooth (to send to a Bluetooth-enabled device), or To Printer (to print on a Bluetooth-enabled device).3. Complete the appropriate task.Note: If your phone has no Bluetooth feature, you may send the file with a message only.Level 1 > Level 2 > Level 3Media Gallery ImagesAccess these options: Camera Pictures, Saved Images, Wallpapers, Wallpaper Shuffle, Screensavers, and Caller IDs.SoundsAccess these options: Saved Sounds, Ringers, Ringer Shuffle, and Voice Memos.Delete AllAccess these options: Camera Pics Only, Images Only, Sounds Only, and Delete All.DRAFT
34 SoundsChange the Default Wallpaper1. From Wallpapers, select a wallpaper.2. Select Set Default.Edit the Wallpaper Shuffle1. From Wallpaper Shuffle, select Edit. With no wallpapers saved, you need to add files. 2. Select Add to include a file in the shuffle, Remove to remove a file from the shuffle, or Options to access more features.3. When finished, select Options > Done.Change the Default Screensaver1. From Screensavers, select a screensaver.2. Select Set Default.Assign a Caller ID1. From Caller IDs, select an image.2. Select Assign.3. At the contacts list, select a contact.SoundsSend a Sound1. From Saved Sounds, highlight a sound.2. Select Send > Via EMS Msg (to attach to an enhanced message), Via MMS Msg (to attach to a multimedia message), or Via Bluetooth (to send to a Bluetooth-enabled device).3. Complete the appropriate task.Note: If your phone has no Bluetooth feature, you may send the file with a message only.Assign a Ringer1. From Ringers, highlight a ringer.2. Select Assign and choose how you want to assign the ringer.3. Complete the appropriate task.Edit the Ringer Shuffle1. From Ringer Shuffle, select Edit. 2. Select Add to include a file in the shuffle, Remove to remove a file from the shuffle, or Options to access more features.3. When finished, select Options > Done.You can only edit the shuffle with at least a file added.Play a Voice Memo1. From Voice Memos, highlight a memo you have recorded.2. Select Play.Use the Navigation key to control the playback tools displayed.Media File OptionsRename a File1. From a media file list, highlight a file.2. Select Options > Rename.3. Enter a new name and select Save.You can only rename unlocked files. Preloaded files on your phone are always locked.DRAFT
User Guide 35Send a File1. From a media file list, highlight a file.2. Select Options > Send > Via EMS Msg (to attach to an enhanced message), Via MMS Msg (to attach to a multimedia message), Via Bluetooth (to send to a Bluetooth-enabled device), or To Printer (to print on a Bluetooth-enabled device). The options available depend on the file type.3. Complete the appropriate task.Note: If your phone has no Bluetooth feature, you may send the file with a message only.Send a File to an Online Location1. From a media file list, highlight a file.2. Select Options > Send to Online.Assign a File1. From a media file list, highlight a file.2. Select Options > Assign and choose how to assign the file.3. Complete the appropriate task.Lock a File1. From a media file list, highlight a file.2. Select Options > Lock to protect a file from being accidently erased. To unlock the file, select Options > Unlock.Play a File1. From a media file list, highlight a file.2. Select Options > Play.Use the Navigation key to control the playback tools displayed.Add Files to a Shuffle1. From a media file list, highlight a file.2. Select Options > Shuffle to add the file to the applicable shuffle.View File Details1. From a media file list, highlight a file.2. Select Options > Details to view the details such as file size or save date.3. Select OK to exit.Modify a File1. From a media file list, select a file.2. Select Options > Modify.3. Select Options and an option to rotate, resize, and so on.4. When done, select Save to save over an existing file or as a new one.Use the Zoom1. From a media file list, select a file.2. Select Options > Zoom.3. Use the Navigation key to zoom in and out.4. Select Cancel to exit.DRAFT
36 Erase Media FilesView a Slideshow1. From Camera Pictures, select Options > Slideshow to play the slideshow of the files contained in the current folder.2. Select Pause (to stop), Play (to resume), or Options (to access more features).With Options selected, your phone automatically pauses the slideshow.3. When you are done, select Options > Exit. Erase Media FilesErase a Single File1. From a media file list, highlight a file.2. Select Options > Erase > Yes.You can only erase unlocked files. Preloaded files on your phone are always locked.Erase All Files in a FolderFrom a media file list, select Options > Erase All > Yes.Note: You can only erase unlocked files. Preloaded files on your phone are always locked.Erase All PicturesFrom Delete All, select Camera Pics Only > Yes to erase all files in the Camera Pictures folder.Note: You can only erase unlocked files.Erase All Image FilesFrom Delete All, select Images Only > Yes to erase all files in the Images folder.Note: You can only erase unlocked files. Preloaded files on your phone are always locked.Erase All Sound FilesFrom Delete All, select Sounds Only > Yes to erase all files in the Sounds folder.Note: You can only erase unlocked files. Preloaded files on your phone are always locked.Erase All Media FilesFrom Delete All, select Delete All > Yes to erase all files in the Media Gallery folder.Note: You can only erase unlocked files. Preloaded files on your phone are always locked.DRAFT
User Guide 377 SettingsSettings MenuSelect Settings from the main menu to access the following functions:Level 1 > Level 2 > Level 3Settings BluetoothAccess these options: On/Off, My Devices, and Settings.ConvenienceAccess these options: Set Time/Date (with Airplane Mode enabled), Airplane Mode, Auto-Hyphen, 1-Touch Dialing, Answer Hold, Fast Find, Frequent List, Minute Alert, Missed Call Alert, Open to Answer, Any Key Answer, and Customize Keys.DisplayAccess these options: Set Wallpaper, Wallpaper Shuffle, Set Screensaver, Themes, Main Menu View, My Banner, Backlighting, Brightness, Language, and Time/Date Format.SoundsAccess these options: Ringers, Ringer Mode, Volume, Flip Sounds, Pwr On/Off Sound, and Keypad.Voice FeaturesAccess these options: Automatic Add, Expert Mode, Display Results, Digit Lengths, Voice Answer, and Voice Training.AccessoriesAccess these options: Headset Sounds, Auto-Answer, Com Port Speed, TTY Device, and T-coil Hearing Aid.NetworkAccess these options: Privacy Alert, Voice Privacy, Roam/Svc Alert, Roam Option, Set Phone Line, Location, Web Alert, and Roam Call Alert.SecurityAccess these options: Lock Phone, Limit Calls, and New Lock Code.Memory StatusCheck how much memory your phone is using.Phone InfoAccess these options: Build Info, Icon Keys, and User Guide.DRAFT
38 BluetoothBluetoothThe Bluetooth® wireless technology (not available on all phones) enables wireless connectivity with accessories such as portable or installed hands-free car kits, phones, handsets, computers, and so on. For details, check with your service provider.You must use a Bluetooth device (compatible with Class 2 Bluetooth wireless technology, version 1.2) in order to use this phone wirelessly. Bluetooth accessories display a symbol on your phone.Enable BluetoothBefore you can connect your phone with a Bluetooth device, you need to enable the Bluetooth feature on your phone.From On/Off, select On.Pair with a DeviceTo enable your phone to communicate with a Bluetooth device, you need to "pair" the device with your phone. The following instructions describe the process. You may also need to reference the user guide provided with your Bluetooth device.1. Prepare the Bluetooth device (accessory) for pairing as described in the device’s user guide.2. From My Devices, select Find New. Your phone then searches and detects any available Bluetooth devices in the vicinity.You must enable the Bluetooth feature on your phone.3. At the device list, highlight a device and select Add.Accept the pairing if prompted.4. If necessary, enter the password provided with the Bluetooth device and select OK.With the password accepted, the device appears in your device list.Use Bluetooth DevicesConnect to a DeviceBefore you can use Bluetooth, you must get your phone ready to communicate with a device. This is called “connecting.” To connect your phone to a Bluetooth device, from My Devices, highlight a device and select Connect.A notification appears confirming the connection. You can now use the device with your phone.Disconnect from a DeviceFrom My Devices, highlight a connected device and select Disconnect.Rename a Device1. From My Devices, highlight a device.2. Select Options > Rename.3. Enter a new name and select Save.DRAFT
User Guide 39Delete a DeviceYou can delete a Bluetooth device that you have paired your phone with.1. From My Devices, highlight a device.2. Select Options > Delete > Yes.View Device ServicesA Bluetooth device paired with your phone may have more than one service profile (such as Headset, Handsfree, and so on). Do the following to check the services available:1. From My Devices, highlight a device.2. Select Options > Services.3. At the service list, highlight a profile and select Connect to change the active profile.Change Bluetooth SettingsFrom Settings, you can modify the following Bluetooth features.Change Phone’s NameYou can change the name presented for other Bluetooth devices’ search of your phone.From My Name, enter a new name and select Save.Limit VisibilityYou can limit the time your phone is visible to other Bluetooth devices.From Visibility, select an option to set the phone visible for your selected time before becoming invisible.View Supported ServicesSelect Services to view a list of the Bluetooth service profiles your phone supports.Enable OBEX AuthenticationFrom OBEX Authentication, select Enabled.With object exchange (OBEX) authentication enabled, you need a user name and password to transfer files via Bluetooth.ConvenienceUse these settings to make your phone more convenient to use.Set Date and TimeIn Airplane mode, you can set the time and date manually.Note: You can only access Set Time/Date with Airplane Mode enabled.1. From Set Time/Date, do the following to change the date:– Scroll left or right to move between the month, day, and year fields.– Scroll up or down to change the month, day, and year.2. Press the OK key to save the date.3. Do the following to change the time:– Scroll left or right to move between the hour, minute, and AM/PM fields.– Scroll up or down to change the hour, minute, and AM/PM.4. Press the OK key to save the time.5. Select Done.DRAFT
40 ConvenienceEnable Airplane ModeWhile in an airplane, it is normally required that you turn off your mobile phone because it emits RF signals that interfere with air traffic control. In airplane mode, however, your phone does not emit RF signals. You cannot make or receive calls, send text messages, use the Browser or Bluetooth, but you can play games, use the Scheduler, set the clock, and make emergency calls to designated emergency numbers. Please check with uniformed personnel before operating your phone in Airplane mode.From Airplane Mode, select Enabled > OK to activate airplane mode.With airplane mode enabled, you can also set the time and date manually.Enable Auto-HyphenationAuto-hyphenation, when enabled, automatically inserts hyphens into your phone numbers to be consistent with the U.S. dialing plan (or the North American Numbering Plan).From Auto-Hyphen, select Enabled to turn on auto-hyphenation.Use 1-Touch DialingThe 1-Touch Dialing feature is the fastest way to call a speed dial location. To call a contact with speed dial, press and hold the speed dialing location.If it is a two-digit location, press the first digit briefly, then press and hold the second digit.Note: To use 1-Touch dialing, you must enable 1-Touch dialing on your phone and have a speed dial location assigned to a contact.From 1-Touch Dialing, select Enabled to turn on 1-touch dialing.Answer HoldEnable Hold CallUse Answer Hold to place incoming calls on hold until you are ready to answer them.1. From Answer Hold, select Enabled.If you have not recorded a hold message, you need to record one, such as “Please hold. I’ll answer in a minute.”2. Record the message twice, as prompted.3. Select Save or Options and one of the following:–Play to replay your message.–Re-Record to record your message again.–Exit to exit.The next time a call comes in, you can place it on hold.Place a Call on HoldYou can place a call on hold with Answer Hold enabled.Note: If you are already on a call and you receive another call, you cannot place the DRAFT
User Guide 41incoming call on hold. With no call waiting enabled, the call goes to Voicemail.When a call comes in, do the following:1. Select Options > Answer Hold to place the caller on hold with your recorded hold message.2. Select Answer to speak to the caller on hold or End Call to hang up without speaking.Change Hold Call Message1. From Answer Hold, select Re-Record Msg.2. Record the message twice, as prompted.3. Select Save to save the message or Options and one of the following:–Play to replay your message.–Re-Record to record your message again.–Exit to exit.Call Contact using Fast Find1. From Fast Find, select Enabled to turn on fast find. 2. From the home screen, press the keys corresponding to the letters of the name you want to find. A matching contact or speed dial entry appears. 3. Scroll to your desired contact and press the Send key to call the number. Enable Frequent ListFrom Frequent List, select Enabled. With Frequent List enabled, the last 15 of your most frequently called contacts appear at the beginning of your contacts list. Scroll past the straight line to view the entire contacts list.Enable Minute AlertFrom Minute Alert, select Enabled. Your phone alerts you with a short beep ten seconds before each minute passes during a call.Set Missed Call AlertFrom Missed Call Alert, select an alert type for missed calls.If you select an & Remind alert, the phone notifies you once when receiving a new message and notifies you again every five minutes. To stop a reminder alert, select Ignore.Enable Open to AnswerFrom Open to Answer, select Enabled to answer calls by opening the phone.Enable Any Key AnswerFrom Any Key Answer, select Enabled to answer calls when you press any key on the keypad.DRAFT
42 DisplayCustomize KeysYou can modify the Navigation key and Left softkey settings to set up your desired shortcut.1. From Customize Keys, select UP Key, LEFT Key, RIGHT Key, DOWN Key, or Left Soft Key.2. Select your desired menu option for the targeted key shortcut.Create a Custom Menu1. From the home screen, scroll up and hold.2. Select Edit.3. Select features from the list provided. A check mark appears next to each selection. You can also remove checkmarks.4. Select Save after selecting all your options.Your new selections appear the next time you select your custom menu.DisplaySet WallpaperYou can select a wallpaper for your phone’s home screen.1. From Set Wallpaper, select Camera Pictures, Saved Images, or Wallpapers.To turn off wallpaper, select None.2. Select a file. You may need to resize or crop the file.3. Select Done.Wallpaper ShuffleEnable Wallpaper ShuffleFrom Wallpaper Shuffle, select Enable to turn on wallpaper shuffle.Edit Wallpaper Shuffle1. From Wallpaper Shuffle, select Edit.2. Select Add (to include a file in the shuffle) or Remove (to remove a file from the shuffle).3. When finished, select Options > Done.View Wallpaper Shuffle1. From Wallpaper Shuffle, select View. The files in your shuffle appear.2. Select Edit to modify the shuffle list or press the Back key to exit.Set Wallpaper Shuffle Interval1. From Wallpaper Shuffle, select Set Shuffle Time.2. Select an interval time from the list. Your wallpaper changes to another file in the shuffle at the selected interval time.Set ScreensaverScreensavers appear on the home screen, activated ten seconds after the last keypress. Incoming calls and alerts override the screensavers.1. From Set Screensaver, select Camera Pictures, Saved Images, or Screensavers.To turn off screensaver, select None.DRAFT
User Guide 432. Select a file. You may need to resize or crop the file.3. Select Done.Set ThemeFrom Themes, select a color theme for the display background.Set Main Menu ViewFrom Main Menu View, select one of the following:•Grid displays icons of each menu item, with its name at the top of the screen.•List displays a list of all menu items.The next time you view the Menu, your selected menu style appears.Set Greeting BannerThe banner is the personal label for your phone, appearing on the home screen above the time and date.1. From My Banner, select Edit.2. Press the Back key to clear the current banner.3. Enter your new text (up to 14 characters).4. Select Save.BacklightingSet Display DurationFrom Backlighting, select Display Duration and one of the following:•Always Dim forces the backlight to remain dim before turning off.•7 Seconds, 10 Seconds, 15 Seconds, or 30 Seconds turns backlighting on for the set time after your last keypress.•Always Bright forces the backlight to remain bright before turning off.Set Keypad DurationFrom Backlighting, select Keypad Duration and one of the following:•Off forces the backlight to remain dim before turning off.•7 Seconds, 10 Seconds, 15 Seconds, 30 Seconds, or 60 Seconds turns backlighting on for the set time after your last keypress.•Same as Display matches the setting for the Display Duration.Set Brightness1. From Brightness, scroll to change the brightness level.2. Select Save.Set LanguageFrom Language, select a language.Set Time and Date FormatFrom Time/Date Format, select a time and date format.DRAFT
44 SoundsSoundsYour phone has several settings that control the sound. You can select from a variety of ringers and adjust the volume.RingersFrom Ringers, you can modify the following settings.Set RingersFrom Ringer Type, select a ringer. (Scroll down the list to play the ringers.)Enable Roam RingerFrom Roam Ringer, select Enabled to activate a specific ringer for roaming calls.Ringer Shuffle– Enable Ringer ShuffleFrom Ringer Shuffle, select Enable to turn on the ringer shuffle.– Edit Ringer Shuffle1. From Ringer Shuffle, select Edit.2. Select Add (to include the file in the shuffle) or Remove (to remove the file from the shuffle).3. When finished, select Options > Done.– View Ringer Shuffle1. From Ringer Shuffle, select View. Only the files used in your shuffle appear.2. Select Edit to modify the shuffle list or press the Back key to exit.Set Ringer ModeYour phone is set to make sounds when you receive calls, press keys, navigate through menus, and receive alerts (such as new messages). You can silence all sounds and set the phone to vibrate or light up when you receive calls and alerts.From Ringer Mode, select one of the following:•Normal Sounds rings for the incoming call or alert (in effect, returning the phone to a non-silent mode).•Vibrate Only vibrates for the duration of the incoming call or other alerts.•Vibe Then Ring vibrates for the first ten seconds and then rings for the remainder of the incoming call alert.•Lights Only lights up for the duration of the incoming call or other alerts.You can also press and hold the # Space key to toggle between Vibrate Only mode and Normal Sounds mode.Note: The phone rings when attached to an external power source (such as a charger), even if all sounds have been silenced.VolumeFrom Volume, you can modify the following settings.Set Ringer Volume1. From Ringer Volume, scroll right or left to set the ringer volume.2. Press the OK key to save.DRAFT
User Guide 45Set Speakerphone Volume1. From Speakerphone Volume, scroll right or left to set the speakerphone volume.2. Press the OK key to save.Set Earpiece Volume1. From Earpiece Volume, scroll right or left to set the earpiece volume.2. Press the OK key to save.Set Keypad Volume1. From Key Volume, scroll right or left to set the keypad volume.2. Press the OK key to save.Enable Smart VolumeFrom Smart Volume, select Enabled to automatically adjust the volume during a call, based on surrounding noise levels.Set Flip Sounds1. From Flip Sounds, select Flip Open or Flip Close.2. Select a sound. (Scroll down the list to play the sounds.)Set Power On/Off Sounds1. From Pwr On/Off Sound, select Power On Sound or Power Off Sound.2. Select a sound to play when your phone powers on or off. (Scroll down the list to play the sounds.)KeypadFrom Keypad, you can modify the following settings.Set Key Press SoundsFrom Key Sounds, select Tone, Click, or Off to set the sounds you hear when pressing the keypad.Set Key Tone LengthFrom Key Length, select Normal or Long to set the length of the keypad tone.Voice FeaturesUse the following features to customize the voice commands.Enable Automatic AddFrom Automatic Add, select Enabled to automatically add a contact to your voice dial list when you create a new contact.Set Expert ModeUse Expert Mode to speak a command after you hear a tone instead of following the initial voice prompts.From Expert Mode, select one of the following:•Normal sets the phone to default voice prompts.•Expert sets the phone to sound tones instead of voice prompts.DRAFT
46 AccessoriesSet Display ResultsYou can set the phone to display up to three voice recognition contacts when calling or searching for a contact with voice commands.From Display Results, select Single Best or Three Best.Set Digit LengthsYou can set the number of digits used for a phone number in your voice dial list.From Digit Lengths, select one of the following options:•North American recognizes only 7, 10, and 1 + 10 digits in a phone number.•Permit All allows 4-14 digits in a phone number.Voice AnswerEnable Voice AnswerYou can set your phone to answer a call with your voice when using a hands-free accessory.1. From Auto-Answer, select Disabled.2. From Ringer Mode, select Normal Sounds.3. From Headset Sounds, select Out of Headset.4. From Voice Answer, select With Accessory.Answer Using Voice AnswerWhen you receive an incoming call, the phone prompts “Incoming call, answer?” With the caller recognized as a contact entry in your phone, the phone prompts “Incoming call from (Name), answer?” Do one of the following:• Say “Yes” or press any key except the End key to answer the call.• Say “No” or press the End key to ignore the call.• Remain silent. The voice alert repeats twice and the phone rings once before returning to the home screen.Use Voice TrainingIf your phone has trouble recognizing your voice, you can train your phone to recognize your specific voice for numbers.1. From Voice Training, read the message and select OK > Train Numbers > OK.2. Follow the prompts for each number until training is complete.Note: You must read the numbers digit by digit for voice training to work.AccessoriesSet Headset SoundsWith a headset attached to your phone, you can play the ringer through the headset or phone speaker.From Headset Sounds, select Out of Phone (ringing from the phone speaker) or Out of Headset (ringing from the headset).DRAFT
User Guide 47Enable Auto-AnswerFrom Auto-Answer, select After 5 Seconds. The phone automatically answers after five seconds with a headset attached.Set Com Port SpeedFrom Com Port Speed, select a data rate at which your phone connects to a laptop or PC.Check with your service provider for details.Connect to TTY DeviceYou can connect the phone to a teletype (TTY) device for the hearing impaired. (TTY device sold separately.)Note: Enable TTY only when using the phone with a TTY device.1. Connect the TTY device to your phone.2. From TTY Device, select OK to clear the notification.3. Select one of the following:–TTY Off disables TTY.–TTY On enables TTY devices.–TTY On + Talk enables TTY devices and voice carry over.–TTY On + Hear enables TTY devices and hearing carry over.Note: You can also enter ##889 with your keypad and select TTY to enable TTY.Connect to Hearing Aid DeviceWith a T-coil hearing aid device (sold separately) connected, you can enable the hearing aid feature.1. Connect the T-coil hearing aid device to your phone.2. From T-coil Hearing Aid, select OK > Enabled.NetworkEnable Privacy AlertFrom Privacy Alert, select Enabled to set your phone to alert you when enhanced digital CDMA privacy is lost or regained.Enable Voice PrivacyFrom Voice Privacy, select Enhanced to use enhanced digital CDMA privacy.Enable Roaming Service AlertUse this setting if you want the phone to alert you when you roam outside of your home service area.From Roam/Svc Alert, select one of the following:•Disabled turns roaming service alert off.•When No Svc alerts you with three tones decreasing in pitch when service is lost and three tones increasing in pitch when service is acquired again.•On Roam Change alerts you with two decreasing tones when roaming service is acquired and three increasing tones when home area service is acquired again.•On Any Change alerts you with three increasing tones if there is a change in roaming service or three decreasing tones if the phone loses service.DRAFT
48 NetworkSet Roaming RestrictionsYou can restrict your phone from making a call when roaming.From Roam Option, select Automatic (to allow roaming) or No Roaming (to disallow roaming).Set Phone LineYour phone can have two service accounts, or phone lines, associated with it. Each phone line has its own phone number.Note: You must first establish a second phone line with your service provider. Once established, a second phone number becomes available in the menu for selection.From Set Phone Line, read the note and select OK and one of the phone lines.When using one line, you cannot receive calls from the other. It would be as if the phone were “off” for that number. Your voicemail, however, still takes messages. All contacts and settings are shared for both lines.Set Location InformationUse Location to share your location information with network services other than emergency services (for example, 911, 111, 999 and 000) in serviced areas. This feature works only when your phone is in digital mode. You do have the option of turning off the locator to emergency services.From Location, select one of the following:•911 Only (default) shares your position information only with emergency services when you call your 3-digit emergency code.•Location On shares your position information, in addition to emergency services.Set Web AlertsYou can set an alert to confirm the start or end of a browser session.From Web Alert, select one of the following:•At Start prompts when you start a session.•At End prompts when you end a session.•Both prompts when you start and end a session.•No Prompts sets for no prompts.Enable Roaming Call AlertYou can set the phone to warn you before you answer or place a call while roaming.Note: Call prompt is disabled when the phone is in Emergency Mode.From Roam Call Alert, select Enabled.The phone emits a distinctive ring to indicate when you are roaming during a call. To accept or place a call while roaming, you must press1.DRAFT
User Guide 49SecurityThis section describes the security features on your phone. You can adjust these features to prevent access to your personal information. All security features are shielded by a four-digit lock code (typically 0000 or the last 4 digits of your phone number).Lock PhoneSet Lock PhoneWith your phone locked, you can call only emergency numbers or your service provider’s customer service number. You can still receive incoming calls.1. From Security, enter your four-digit lock code.2. Select Lock Phone > OK and one of the following:–Lock Now locks the phone immediately.–On Power Up locks the phone every time you turn it on.Unlock the Phone1. From the home screen, select Unlock.2. Enter your four-digit lock code.Set Limit CallsYou can limit the calls that can be made from your phone to emergency numbers, your contacts, and your service provider’s numbers.1. From Security, enter your four-digit lock code.2. Select Limit Calls and one of the following:–No Limit does not limit calls.–Limit Outgoing limits outgoing calls while incoming calls still work.–Limit All limits both incoming and outgoing calls.Change Lock CodeChange your lock code from the default.1. From Security, enter your four-digit lock code.2. Select New Lock Code > Yes.3. Enter a new four-digit code.4. Re-enter your new lock code.Check Memory StatusFrom Memory Status, check how much memory is being used by your phone.Phone InfoView Version InformationSelect Build Info to check your phone’s software and hardware information.View Phone IconsSelect Icon Keys to view the icons used in your phone.Access User GuideFrom User Guide, access the user guide for your phone.DRAFT
50 Messaging Menu8 MessagingUse Messaging to send, receive, and erase messages from your phone.Messaging MenuSelect Messaging from the main menu to access the following functions:Level 1 > Level 2 > Level 3Messaging New Text MsgCompose a text message.New Pic MsgCompose a multimedia message.VoicemailShows how many voicemails are waiting.InboxShows a list of received text and multimedia messages.Browser AlertsShows how many alerts are waiting.Sent MsgsShows a list of messages you have successfully sent.OutboxShows a list of messages you have sent, but are pending or failed.Saved MsgsShows a list of messages you have saved.DraftsShows a list of messages that have been started, but saved to be completed at a later time.Msg SettingsAccess these options: Alerts, Chat View, Msg List View, Signature, QuickText, Auto Retrieve, CC and BCC, Callback Number, Save to Sent, Auto-Erase, Default Text, Text Msg Receipt, Pic Msg Receipt, Voicemail Number, and Erase Recent List.Erase MsgsAccess these options: Inbox, Outbox, Sent Msgs, Saved Msgs, Drafts, and All.Message CountCheck how many messages you have.Note: The menu items on your phone can change depending on the options provided by your service provider. Check with your service provider.DRAFT
User Guide 51Send MessagesCreate a Text MessageYou can only send text messages to phone numbers capable of receiving them or to email addresses if supported.1. From New Text Msg, enter a recipient’s phone number or email address. (Select Options to access contacts, groups or recently used addresses. Scroll down to move to the next field when done.)You can message up to ten recipients at once. Use comma or spaces to separate addresses. 2. Enter the message. (Select Options to access more features.)3. When done, select Send.Create a Multimedia MessageYou can only send multimedia messages to phone numbers capable of receiving them or to email addresses. If the character and file size limit for a single multimedia message is exceeded, the message must be edited to meet the size limitation.Note: Multimedia messaging is not available on all phones. Check with your service provider.1. From New Pic Msg, enter a recipient’s phone number or email address. (Select Options to access contacts, groups or recently used addresses. Scroll down to move to the next field when done.)You can message up to ten recipients at once. Use comma or spaces to separate addresses.2. Repeat the first step for CC and BCC, if needed.3. Enter a subject.4. Enter a message.5. Attach an image file. (Select Options to access more features.)6. Attach a sound file. (Select Options to access more features.)7. When done, select Send.Receive Calls while Creating MessagesIf you receive a call while creating a message a notification appears. Do one of the following:•Select Ignore to ignore the call and return to the message screen.•Press the Send key to answer the call and your phone automatically saves the message to Drafts.Enter Message RecipientsThe following describes how to add recipients to your messages, depending on the services provided. Check with your service provider for availability.DRAFT
52 Send MessagesAdd Recipients from Contacts1. At the compose message screen, select Options > Contacts when entering a phone number or email address.2. Select a contact from the contacts list.3. Select a number or address.4. Complete your message.Add Recipients from Recent List1. At the compose message screen, select Options > Recent List when entering a phone number or email address.2. Select a number or address.3. Complete your message.Add Recipients from Recent Calls1. At the compose message screen, select Options > Recent Calls when entering a phone number or email address.2. Select a number.3. Complete your message.Send to Groups1. At the compose message screen, select Options > Groups when entering a phone number or email address.2. Select a group.3. Complete your message.Save Recipients as Contacts1. At the compose message screen, select Options > Save Address when entering a phone number or email address.2. Select a number or address.3. Select Options > Save New Contact (to create a new contact) or Options > Add to Contact (to add the number or address to an existing contact).Add Recipients from Message Text1. At the compose message screen, select Options > Add Address when entering the text to add more recipients.2. Enter a number or address to add.3. Complete your message.Send Messages to Online Location1. At the compose message screen, select Options > Online Album when entering a phone number or email address to upload the message to your online photo album.2. Complete your message.Save Messages to DraftsAt the compose message screen, select Options > Save Message when entering the text. Your phone saves the message to Drafts for you to complete at a later time.DRAFT
User Guide 53Complete Messages in Drafts1. From Drafts, highlight your desired message.2. Select Edit or Options > Edit.3. Complete your message.Use Preset TextAdd Preset Text1. At the compose message screen, select Options > Insert QuickText when entering the text.2. Select a preset text entry.3. Complete your message.Save Messages as Preset Text1. At the compose message screen, select Options > Save as QuickText when entering the text to use it later as preset text.2. Complete your message.Save Received Messages as Preset TextWhen viewing a received message, select Options > Save as QuickText to use it later as preset text.Attaching Files to MessagesThe following describes how to select Options to add various files to your messages when entering the text, depending on the services provided.Add Memos to Messages1. At the compose message screen, select Options > Insert Note when entering the text.2. Select a memo.3. Complete your message.Add Pictures to Messages1. At the compose message screen, select Options > Insert Picture when entering the text.2. Select a file.3. Complete your message.Add Sounds to Messages1. At the compose message screen, select Options > Insert Sound when entering the text.2. Select a file.3. Complete your message.Add Contacts to Messages1. At the compose message screen, select Options > Insert Contact when entering the text.2. Select a contact from your contacts list.3. Complete your message.DRAFT
54 Send MessagesAdd Slides to MessagesUse slides in a multimedia message to send multiple files of the same type, such as pictures or voice memos. A multimedia message may have up to ten slides.1. At the compose message screen, select Options > Add New Slide when entering the text.2. Select a slide and add more files or text if needed.To navigate through the slides, select Options > Next Slide or Previous Slide. To erase the current slide, select Options > Erase Slide.3. Complete your message.You can only attach a limited number of files.Add Media Files to Messages1. At the compose message screen, select Options > Media Gallery when adding a media file.2. Select a file to add to your message.To remove a media file, select the applicable option. For example, to remove a sound, select Options > Remove Sound.3. Complete your message.Take Pictures for Messages1. At the compose message screen, select Options > Take a Picture when adding an image.2. Take a picture.3. Select it to add to your message.4. Complete your message.Record Sounds for Messages1. At the compose message screen, select Options > Record Sound when adding a sound.2. Record a sound.3. Select it to add to your message.4. Complete your message.Set Writing Language1. At the compose message screen, select Options > Writing Language to change the language you compose your message in.2. Complete your message.Preview Messages1. At the compose message screen, select Options > Preview Message when entering the message or media file.2. Do one of the following:– If the message has more than one slide, select Next to view the next slide.– If the message has only one slide, select Send to send message.–Select Options to access more features.Set Individual Message SettingsThe following describes how to set message settings for individual messages.DRAFT
User Guide 55Note: Your selection of each of the following message settings overrides that selected for all messages from Msg Settings.Request a Message Receipt1. When entering a message, select Options > Msg Settings > Msg Receipt > Request to request a message delivery notice.2. Complete your message.Set Message Priority1. When entering a message, select Options > Msg Settings > Set Priority to set the priority level.2. Complete your message.Change the Callback Number1. When entering the message, select Options > Msg Settings > Callback Number.2. Enter your callback number and select OK.3. Complete your message.Send Messages Later1. When entering a message, select Options > Msg Settings > Send Later.2. Select Immediate or Set Time to set a specific time to send the message.3. Press the OK key to change the time.– Scroll left or right to move between the hour, minute, and AM/PM.– Scroll up or down to change the hour, minute, and AM/PM.4. Select Next.5. Press the OK key to change the date.– Scroll left or right to move between the month, day, and year.– Scroll up or down to change the month, day, and year.6. Select Done.7. Complete your message. Your phone will save the message and send it later.Set the Validity Period1. When entering a message, select Options > Msg Settings > Validity Period.2. Select Set Time to set how long to keep your message valid before removing it from the phone if not sent.3. Press the OK key to change the time.– Scroll left or right to move between the hour, minute, and AM/PM.– Scroll up or down to change the hour, minute, and AM/PM.4. Select Next.5. Press the OK key to change the date.– Scroll left or right to move between the month, day, and year.– Scroll up or down to change the month, day, and year.6. Select Done.7. Complete your message.DRAFT
56 Manage Received MessagesSet the Slide Interval1. When entering the message, select Options > Msg Settings > Slide Interval.2. Select a time interval for the slides.3. Complete your message.Set CC and BCC Fields1. When entering the message, select Options > Msg Settings > CC and BCC to enable or disable the CC and BCC address fields.2. Complete your message.Manage Received MessagesReply to Text MessagesWhen receiving a message, your phone displays a notification and the message icon appears at the top of your screen. The message icon flashes with an urgent message alert if the message is urgent.1. When a message notification appears, select Inbox (to view the message) or Ignore (to clear the notification).An icon appears at the top of your screen when you have an unread message.2. From Inbox, highlight a message and select View > Reply (to compose your message) or Options (to access more features).3. Complete your message and select Send.Reply to Multimedia Messages (with Auto Retrieve)When receiving a message in auto retrieve mode, your phone automatically downloads it with a notification.Note: If receiving a message during a call, the phone downloads the message after the call.1. At a message notification, select View (to view the message) or Later (to check it later).2. After viewing the message, select Reply or Options > Reply if the message has more than one slide.Select Options to access more features.3. Complete your message and select Send.Reply to Multimedia Messages (with Prompt)When receiving a message in prompt mode, your phone displays a notification showing a new message is available for download.1. At the download notification, select Yes (to download the message) or Options (to retrieve it later or erase it without downloading).2. At the message notification, select View (to view the message) or Later (to check it later).3. Select Reply or Options > Reply if the message has more than one slide.Select Options to access more features.4. Complete your message and select Send.Select Options to access more features.DRAFT
User Guide 57Forward Messages1. When viewing a received message, select Options > Forward.2. Enter a number or address.3. Complete your message and select Send.Reply to all Recipients1. When viewing a received message, select Options > Reply All to send your reply to all the message recipients.2. Complete the message and select Send.Reply with a Copy of the Message1. When viewing a received message, select Options > Reply with Copy. The original message appears in your reply message.2. Complete your message and select Send.Call SenderWhen viewing a received message, select Options > Call to call the sender.Save Received MessagesWhen viewing a received message, select Options > Save Message to save it to Saved Msgs.View RecipientsWhen viewing a received message, select Options > Recipients to check all recipients of the message.View Sender InformationWhen viewing a received message, select Options > Sender to view an existing contact, add to an existing contact, or create a new contact depending on the sender.Lock MessagesWhen viewing a received message, select Options > Lock Msg to protect it from accidental deletion. To unlock the message, select Options > Unlock Msg.Sort Messages in Inbox1. From Inbox, select Options > Sort.2. Select a sort option.Go to Web Addresses in MessagesWhen viewing a received message, select Options > Launch Browser to go to a web address included in the message.Manage Attached FilesPlay Attached FilesWhen viewing a received message with files attached, select Options > Play (to play an attached file), Stop (to stop playing), or Mute (to turn off the sound).Save Attached FilesWhen viewing a received message with files attached, select the applicable save option to save the attached files, including graphics, sounds, contacts (vCard), or events (vCal). For example, to save a contact, select Options > Save Contact.DRAFT
58 Manage VoicemailView Messages with Multiple SlidesWhen viewing a received message containing multiple slides, use the following options to navigate through the slides.•Next to view the next slide.•Options > Replay to restart the message from the beginning slide.•Options > Pause to pause at the current slide.•Options > Resume to resume playing the slides.•Options > Done to exit the message.View Message InformationWhen viewing a received message, select Options > Message Info to view the message priority, sent time, size, etc.Replay MessagesWhen viewing a received message, select Options > Replay to restart the message (including a slide or sound if contained) from the beginning.Manage VoicemailConfigure your VoicemailBefore your phone can receive voicemail messages, you need to set up a password and record a personal greeting with your service provider.When you have set up your voicemail, all unanswered calls to your phone are automatically transferred to voicemail, even if your phone is in use or turned off.1. Press and hold the 1 key.2. Follow the system prompts to create a password and record a greeting.Check your VoicemailWhen you receive a voicemail message, a notification with a voicemail message icon appears at the top of your screen.• At the voicemail notification, select Call to call your voicemail number and follow the system prompts to retrieve the message.Select Ignore to clear the notification without checking messages. The notification icon remains on top of the screen until you listen to the message.• When only the voicemail message icon appears on top of the screen, select Voicemail and follow the system prompts to retrieve the message.Manage Sent MessagesCheck Message Status in Sent FolderUse the following symbols to check the Sent folder for the status of messages successfully sent.The scheduled message will be sent at the scheduled time. You cannot cancel delivery of the message.DRAFT
User Guide 59Check Message Status in OutboxUse the following symbols to check your Outbox for the status of messages sent but still in process.Unable to Send MessagesYou may not be able to send or receive messages if your phone’s memory is nearly full, or if digital service is not available at the time. To free up memory, erase old messages. See “Erase Messages” on page 62.Appended MessagesIf you go over the character limit for a single message, the phone may automatically append an empty segment to your message to make space.Warning: Your service provider may charge you for each message segment.When you start a message, the maximum character limit appears once you are in the message entry field. This number counts down as you enter characters, until it reaches 0.If you continue to enter text after this counter reaches 0, a message segment may be appended. When you reach the message size limit, you are prompted to edit the message or alerted that the message is being appended.Note: Appended messages may not be available on all phones. Check with your service provider.Manage Browser Alerts1. From Browser Alerts, select an alert.2. Select Connect to launch the browser. Message SettingsThe following message settings affect all messages unless you change them for individual messages.Set Message Alerts1. From Alerts, select Msg Alert.2. Select an alert for messages.If you select an & Remind alert, the phone notifies you once when receiving a new message and notifies you again every five minutes. To stop a reminder alert, select Ignore.The message was sent. You cannot cancel delivery of the message.The message has been received.The message has been sent to more than one recipient.The message is pending and will be sent when possible. You can cancel delivery of the message.The message cannot be sent because service is not available. An alert appears on your phone if the message cannot be sent.DRAFT
60 Message SettingsSet Page Alerts1. From Alerts, select Page Alert.2. Select an alert for pages.If you select an & Remind alert, the phone notifies you once when receiving a new message and notifies you again every five minutes. To stop a reminder alert, select Ignore.Set Voicemail Alerts1. From Alerts, select Voicemail Alert.2. Select an alert for voicemails.If you select an & Remind alert, the phone notifies you once when receiving a new message and notifies you again every five minutes. To stop a reminder alert, select Ignore.Set Chat ViewFrom Chat View, select Conversation to group sent and received messages by contact, phone number, or address. To view messages in the order they are received or sent, select Classic.Set Message List ViewFrom Msg List View, select one of the following to set your message list display:•Sender & Preview displays the sender and first part of messages.•Sender & Date-Time displays the sender and sent time of messages.•Msg Preview displays the first part of messages.•Sender displays the message sender.Set your SignatureYou can create a signature to appear at the end of all outgoing messages.1. From Signature, enter your signature.2. Select OK to save the signature.Note: The signature counts towards the character limit of your message.Edit Preset MessagesYour phone comes with preset messages, such as “Please call me,” which you can insert into the body of a text message. You can edit or create up to 40 preset messages.1. From QuickText, do one of the following:– Scroll to a preset message and select Edit.–Select New Msg to create a new preset message.2. Enter or edit the text.3. Select Save.Note: You can also save messages you have written or received as preset messages.Enable Auto RetrieveFrom Auto Retrieve, select one of the following:•Disabled turns off auto retrieve and prompts you before downloading any multimedia messages.•Enabled turns on auto retrieve to automatically download multimedia messages.DRAFT
User Guide 61Enable CC/BCC FieldsFrom CC and BCC, select Disabled (to hide the CC and BCC fields) or Enabled (to show them).Set Callback Number1. From Callback Number, enter a new number to change your default callback number.2. Select OK to save the number.Enable Save to SentFrom Save to Sent, select Enabled to automatically save outgoing messages to the Sent Msgs folder.Enable Auto-EraseUse Auto-Erase to set your phone to erase messages automatically when it needs memory for incoming messages.From Auto-Erase, select one of the following:•Disabled erases no messages.•Inbox Msgs erases old messages in Inbox when memory is needed.•Sent Msgs erases old messages in Sent Msgs when memory is needed.•Both erases old messages in both Inbox and Sent Msgs when memory is needed.Set Default TextYou can change the default text entry mode when creating a text message. This setting applies only to the Message field, not the Send To field.From Default Text, select Normal Alpha (to enter text letter by letter) or Rapid Entry (to enter text with word recognition).Request Text Message ReceiptsFrom Text Msg Receipt, select Request to request a notification when a recipient has received your text message.Request Multimedia Message ReceiptsFrom Pic Msg Receipt, select Request to request a notification when a recipient has received your multimedia message.Set your Voicemail NumberOften your service provider automatically programs your voicemail number (the number your phone calls to retrieve voicemail). To change it:1. From Voicemail Number, select Edit.2. Enter your voicemail number. (Use Options > Time Pause or Hard Pause to enter pauses.)3. Select Save.Erase Recent ListFrom Erase Recent List, select Yes to clear the list of recipients you have recently sent messages to.DRAFT
62 Erase MessagesErase MessagesErasing old messages frees up memory in your phone. You can erase messages as you send or read them, erase them one at a time, or erase them all at once.Erase a Single MessageWhen viewing a received message, select Options > Erase > Yes.Note: You can erase a scheduled message, but cannot cancel its delivery.Erase Messages from a FolderFrom Erase Msgs, select a folder to erase messages from. For example, to erase received messages, select Inbox > Yes.Note: You cannot recover deleted information.Erase All MessagesFrom Erase Msgs, select All > Yes to erase all messages from all folders, except for voicemail messages.Note: You cannot recover deleted information.Check Message CountFrom Message Count screen, check how many messages you have stored.DRAFT
User Guide 639 CameraCamera TipsYour phone has a camera. Before using your phone’s camera, here are some tips:• You cannot activate the camera while on an active call or while browsing the Internet.• Once the camera is active, the home screen acts as the viewfinder.• If you get a “Low memory” error, check your resolution and quality compression settings.• If there is no activity within 30 seconds after you turn your camera on, the camera times out and returns to the previous launch point.• Menu settings and options can only be accessed when the camera is active.• Numbers in the top right corner indicate the number of snapshots remaining before the phone runs out of memory.Take a Picture1. To activate the camera, press and hold the Camera key. You can also select Camera from the main menu.2. Focus on the image using the phone’s display as a viewfinder.3. To take a picture, press the OK key. The picture is saved to Camera Pictures.4. Select Send > Via EMS Msg (to attach to an enhanced message), Via MMS Msg (to attach to a multimedia message), Via Bluetooth (to send to a Bluetooth-enabled device), or To Printer (to print on a Bluetooth-enabled device).Select Erase to delete the picture from your phone. 5. Press the End key to exit camera mode.Note: If your phone has no Bluetooth feature, you may send the file with a message only.Other Camera OptionsCamera Setting OptionsAdjust the ResolutionFrom camera mode, select Options > Settings > Resolution and a size for your pictures.Numbers in the bottom left corner indicate the current resolution setting.Set Self TimerFrom camera mode, select Options > Settings > Self Timer and a time.The icon indicates the timer is activated. When you take a picture, a beep plays three seconds from the time the shutter snaps the picture.DRAFT
64 Other Camera OptionsEnable Date/Time StampFrom camera mode, select Options > Settings > Date/Time > On to place a date/time stamp on each picture taken.The icon indicates when the date/time stamp is on.Enable Multishot ModeFrom camera mode, select Options > Settings > Multishot > On to take multiple pictures.The icon indicates multishot mode is enabled. When you take a picture, press and hold the OK key to take multiple pictures. A single tone plays for each picture taken.Your camera is set to a lower resolution during multishot mode. The resolution setting returns to the previous setting when you are done.Set Shutter Sound1. From camera mode, select Options > Settings > Shutter Sound.2. Select a sound to play when the shutter takes a picture.Set White Balance1. From camera mode, select Options > Settings > White Balance.2. Scroll left or right to select the white balance setting. Look at the display to see how each setting looks.Set Color Tone1. From camera mode, select Options > Settings > Color Tone.2. Scroll left or right to select a color tone. Look at the viewfinder to see how each setting looks.Set Picture QualityFrom camera mode, select Options > Settings > Picture Quality and a quality level for your picture.When you select a higher quality level, the size of the file is bigger.Set Brightness Level1. From camera mode, select Options > Brightness.2. Scroll left or right to change the brightness level. Press the OK key to set the brightness.Go to Camera PicturesFrom camera mode, select Options > Camera Pictures to see all of the pictures you have taken. These are located in Camera Pictures.Take a Picture in a Frame1. From camera mode, select Options > Frames.2. Scroll left or right to view the frames available.3. Select OK to choose a frame.4. Take a picture with the frame. The frame is part of the image and can not be removed.DRAFT
User Guide 6510 ToolsTools MenuSelect Tools from the main menu to access the following functions:Voice MemoUse Voice Memo to record and play back audio memos.Record Voice Memos1. From Voice Memo, select Record New.2. Record your voice memo and select Stop when done.3. Select Save.If you receive an incoming call while recording a memo, the memo is saved and the incoming call screen appears.Play Voice Memos1. From Recorded Memos, highlight a memo.2. Select Play to play the memo or Options to access more features.Level 1 > Level 2 > Level 3Tools Voice MemoAccess these options: Record New and Recorded Memos.SchedulerSchedule an appointment.Alarm ClockSet an alarm.Tip CalculatorCalculate a tip.CalculatorPerform basic calculations.TimerSet a countdown timer.StopwatchUse a stopwatch timer.World ClockView times from different time zones.MemopadAccess these options: New Memo and View Memos.DRAFT
66 SchedulerSchedulerUse Scheduler to schedule events and set reminder alerts.Create an Event1. From Add New Event, enter a name. Scroll down to move to the next field when done.2. Press the OK key to select an event type from the list.3. Press the OK key to change the date, if needed. – Scroll left or right to move between month, day, and year fields.– Scroll up or down to change month, day, and year.Press the OK key to save and move to the next field.4. Press the OK key to change the time, if needed.– Scroll left or right to move between hour, minute, and AM/PM fields.– Scroll up or down to change hour, minute, and AM/PM.Press the OK key to save and move to the next field.5. Press the OK key to change the duration, if needed.– Scroll left or right to move between hour and minute fields.– Scroll up or down to change hour and minute.Press the OK key to save and move to the next field.6. Press the OK key to select a priority from the list.7. Press the OK key to select a reminder from the list.8. Press the OK key to select a reminder sound from the list.9. Press the OK key to select During Event to enable silent mode or Off to have normal sounds.10. Press the OK key to select a recurring event from the list, if needed.11. Select Save.View EventsView Events by Month1. From View Month, scroll through the month view. (Days with events are highlighted.)2. Press the OK key to select a date.3. Do one of the following:– Scroll left or right to move to another date.– Select an event.– Scroll to a time and select Add New to create a new event.–Select Options to access more features.DRAFT
User Guide 67View Events by DateFrom View Day, do one of the following:• Scroll left or right to move to another date.• Select an event.• Scroll to a time and select Add New to create a new event.• Select Options to access more features.Go to a Specific Date1. From Go to Date, scroll left or right to move between month, day, and year fields. Scroll up or down to change month, day, or year.2. Press the OK key to select the date.View Events by ListFrom View All Events, select an event from the list or Options to access more features.Return to the Current DateFrom View Day, select Options > Go to Today to return to the current date.Sort Events by TimeFrom View All Events, select Options > Sort by Time to sort events by time.Sort Events by TypeFrom View All Events, select Options > Sort by Type to sort events by their assigned type.Sort Events by PriorityFrom View All Events, select Options > Sort by Priority to sort events by their assigned priority.Modify EventsEdit an Event1. From View Day, select an event.2. At the event details screen, select Options > Edit.3. Modify the event and select Save.Send an Event1. From View Day, select an event.2. At the event details screen, select Options > Send > Via MMS Msg (to attach the file to a multimedia message), Via Bluetooth (to send the file to a Bluetooth-enabled device), or To Printer (to print the file on a Bluetooth-enabled device).3. Complete the appropriate task.Note: If your phone has no Bluetooth feature, you may only send the file with a message.Copy an Event1. From View Day, select an event.2. At the event details screen, select Options > Copy.3. Enter a new name for the event.4. Complete the event and select Save.DRAFT
68 Alarm ClockErase EventsErase an Event1. From View Day, select an event.2. At the event details screen, select Options > Erase > Yes.Erase the Current Day’s EventsFrom View Day, select Options > Erase Today’s Events > Yes to erase all events on that day.Erase All EventsFrom View All Events, select Options > Erase All Events > Yes to erase all events from the phone.Note: You cannot recover deleted information.Erase All Past EventsFrom View All Events, select Options > Erase All Past Events > Yes to erase all past events from the phone.Note: You cannot recover deleted information.Change Scheduler SettingsFrom Settings, you can modify the following features.Set Scheduler Hours1. From Scheduler Hours, modify the start and end times. – Scroll left or right to move between hour, minute, and AM/PM fields.– Scroll up or down to change hour, minute, and AM/PM.2. Select Save when done. Erase Events AutomaticallyFrom Auto Erase, select an option from the list to set when to automatically erase your past events.Set Event PriorityFrom Priority, select an option to set every event you create with this priority type.Set Event ReminderFrom Reminder, select an option to set every event you create with this reminder setting.Set Event Reminder AlertFrom Reminder Sound, select an option to set every event you create with this reminder alert. (Scroll to listen to sounds.)Set Event Silent ModeFrom Silent Mode, select an option to set every event you create with this silent mode.Alarm ClockYou can set up to four alerts with your phone’s three alarm clocks and one quick alarm.Note: The alert occurs only if the phone is on.DRAFT
User Guide 69Set an Alarm1. From Alarm Clock, scroll to one of the alarms and select Set.2. Press the OK key to change the time, if needed.– Scroll left or right to move between hour, minute and AM/PM fields.– Scroll up or down to change hour, minute and AM/PM.Press the OK key to save time and move to the next field.3. Press the OK key to select a sound from the list.4. Press the OK key to select a recurring alarm from the list, if needed.5. Press the OK key to enter a note.6. Select Save.When the alarm rings, select Stop to turn off the alarm or Snooze to set the alarm to ring in another ten minutes.Set the Quick Alarm1. From Alarm Clock, scroll to the quick alarm and select Set.2. Choose a time. (A notification shows the quick alarm is on.)When the quick alarm rings, select Off to turn off the alarm, or Reset to set the quick alarm again.Change Alarm Clock SettingsFrom Settings, you can modify the following features.Set Snooze DurationFrom Snooze Duration, select an option to set how long before the alarm goes off again when you hit the snooze.Set Snooze LimitFrom Snooze Limit, select an option to set how many times you can hit the snooze.Use Tip Calculator1. From Tip Calculator, enter the amount of your bill.2. Select the percentage you want to tip.3. Enter the number of people sharing the bill (or enter 1 if paying the entire bill).4. Select Next to view the final bill.5. Select Done when finished.Use Calculator1. From Calculator, enter the first number.2. Select a mathematical operation:– Scroll left to multiply.– Scroll right to divide.– Scroll up to add.– Scroll down to subtract.Your selection will appear highlighted.DRAFT
70 Use Timer3. Enter the second number, and press the OK key to view the result.4. Select Exit to return to the menu, or Options and one of the following:–Square squares the entered value.–Square Root shows the square root of the entered value.–Cube cubes the entered value.–MS replaces the value currently stored in memory with the displayed result on the screen.–M+ adds displayed result on the screen to the value currently stored in memory.–MR displays value currently stored in memory on the screen.–MC clears value currently stored in memory.Use TimerThe timer counts down for the specified time. It beeps when that amount of time has elapsed.1. From Timer, select Set.2. Enter the time length.– Scroll left or right to move between hours, minutes, or seconds fields.– Scroll up or down to change hours, minutes, or seconds.3. Select Sound, and choose from the list to modify the sound.4. To work the timer, select from the following options:–Start begins the countdown.–Stop pauses the countdown.–Reset clears the timer.When the countdown is complete, select Off to silence the alarm.Use StopwatchFrom Stopwatch, select from the following options:•Start begins counting.•Stop pauses counting.•Reset clears the stopwatch.Press the Back key to exit.World ClockUse World Clock to check times in cities around the world in relation to your local time.Set World Clock1. From World Clock, first scroll left or right to select a time zone.2. Check your local time and date on the first line, followed by your selected world city and its time and date.Search World Clock1. From World Clock, select Options > Search City or Search Country.2. Enter the first letter(s) of your desired city or country.3. Select a city or country from the list.DRAFT
User Guide 71MemopadWrite a Memo1. From New Memo, enter the memo.2. Select Save.View a MemoFrom View Memos, select View to open a memo or Options to access more features.Edit a Memo1. From View Memos, highlight a memo.2. Select Options > Edit.3. Edit the memo, and select Save.Send a Memo1. From View Memos, highlight a memo.2. Select Options > Send as SMS.3. Complete the message, and select Send.Call a Number in a MemoIf you have a phone number in a memo, you can call it.1. From View Memos, highlight a memo.2. Select Options > Use Numbers.3. Select a number, and press the Send key.Lock a MemoYou can lock a memo to prevent it from being edited or erased.1. From View Memos, highlight a memo.2. Select Options > Lock Memo.To unlock a memo, select Unlock Memo.Erase a Memo1. From View Memos, highlight a memo.2. Select Options > Erase > Yes.Erase All MemosFrom View Memos, select Options > Erase All > Yes.Note: Selecting Erase All only erases unlocked memos.DRAFT
72 Launch Browser11 BrowserYou can use your phone to browse the Internet if you have obtained phone Internet services from your service provider and if over-the-air Internet access is available in your area.Launch BrowserSelect Browser to launch the browser. An alert appears notifying of airtime fees, if you have enabled web alerts. Select OK to continue.If this is the first time you have connected to the Internet, a message informs you that security is not yet enabled for your browser. Select Yes to enable security.Browse the WebA browser home page with a list of bookmarks and some browser menu options appear when you are connected to the Web. The lock icon appears in a secure session. You can do the following:• To choose a site, scroll to the link and press the OK key.• An underline and an arrow indicate that there is more text. Scroll down to view the rest of the text.•Press the Back key to return to the previous screen.•Press the End key to exit.• Select Options to access more browser features.Add a Bookmark1. Surf to the Web page you want to bookmark and select Options > Add to Bookmarks.2. Edit the bookmark’s details, if needed.3. Select Options > Save to save the bookmark.To access your saved bookmarks, select Options > Bookmarks from any web page. Scroll to a bookmark and press the OK key.DRAFT
User Guide 7312 DownloadsHow does BREW Work?Your Kyocera phone has the added ability to download and manage applications through BREW.You connect to the server, download applications, and then manage them as you like. When you choose an application, you have the option of choosing a demo, various limited use options, or the full version—all varying in price. If you choose a demo, BREW lets you know when it has expired. If you choose a priced version, the amount is added to your phone bill. BREW also lets you know if you are running out of memory. At that point, you can either disable an application or remove it completely.Once applications are loaded, you can update to newer versions as they become available.For more information about BREW capabilities and application pricing, contact your service provider.Download an Application1. From Downloads, select Mobileshop > Catalog. When a connection is made, a list of application types appears.2. Select an application type. A list of applications appears. Long titles scroll left as you highlight them.3. Select an application. A list of usages appears. There may be one or more usages available. Prices are specified for each usage.4. Select a usage for the application. You are prompted to confirm your purchase.5. Select Yes to confirm. The application downloads to your phone. Download times may vary.To open the application now, select Yes. If you select No, you return to Downloads, where you see a link to your new application.Note: Your connection to the application server automatically ends after 30 seconds, unless you connect again to download more apps. If you want to end the connection manually, press the End key on your phone.Access Help for DownloadsFrom Downloads, select Help to get instructions on how to run and manage your downloaded applications.DRAFT
74 Call a Contact13 Voice CommandsYou can execute certain commands through voice recognition. To control the settings associated with voice commands, see “Voice Features” on page 45.Call a Contact1. From the home screen, press and hold the Send key. The phone prompts, “Say a command”.2. Say “Contact” and the name of the person you want to call.The phone prompts, “Please repeat” or “Say a name” if it does not recognize the name. If the name you spoke matches a contact in the voice dial list, the phone prompts: “Name, correct?” Say “Yes” to make the call, “No” to select a similar name, or “Cancel” to cancel the phone call.If the phone finds multiple voice tags that sound like the name you said, the phone will list the names. You will be asked to verify which name you want to call. Say “Yes” when you hear the correct name. Say “No” when you hear an incorrect name.3. Press the End key to end the call.To modify your voice dial list, see “Enable Voice Dial Tags” on page 32.Call a Number1. From the home screen, press and hold the Send key. The phone prompts, “Say a command”.2. Say “Dial Number” and then speak the digits of the number you want to call. If you pause, the phone prompts you, “Did you say <number>” or “Say a number” if it does not recognize the name. Say “Yes” to make the call, “No” to cancel the phone call.3. Press the End key to end the call.Use a Shortcut1. From the home screen, press and hold the Send key. The phone prompts, “Say a command”.2. Say the name of the menu item you want to access or say “Shortcuts” to view a list of menu items. The phone prompts, “Say one of the shortcuts”.3. Say the name of the menu item you want to access.DRAFT
User Guide 75Find a Contact1. From the home screen, press and hold the Send key. The phone prompts, “Say a command”.2. Say “Find Contact”. The phone prompts, “Say a name”.The phone prompts, “Please repeat” or “Say a name” if it does not recognize the name. If the name you spoke matches a contact in the voice dial list, the phone prompts: “Name, correct?” Say “Yes” to display the contact, “No” to select a similar name, or “Cancel” to cancel the search.Note: You can only search for contacts that are in the voice dial list.DRAFT
76 User Guide14 Get HelpUser GuideFrom Phone Info, select User Guide to access the user guide for your phone. You can also find the user guide at www.kyocera-wireless.com/support.Customer SupportYour service provider’s customer support department may be accessible directly from your phone when you dial a number, such as *611 (check with your service provider). They can answer questions about your phone, phone bill, call coverage area, and specific features available to you, such as call forwarding or voicemail. For questions about the phone features, refer to the materials provided with your phone, or visit www.kyocera-wireless.com.For additional questions, you may contact the Kyocera Communications Inc. Customer Care Center in any of the following ways:• Web site: www.kyocera-wireless.com.• Email: phone-help@kyocera-wireless.com.• Phone (U. S. and Canada): 1-800-349-4478 or 1-858-882-2000 (press 2 for Product Information).Before requesting support, please try to reproduce and isolate the problem. When you contact the Customer Care Center, be ready to provide the following information:• The name of your service provider.• The actual error message or problem you are experiencing.• The steps you took to reproduce the problem.• The phone’s mobile equipment identifier (MEID).Note: From Phone Info, select Build Info. Scroll down to MEID (dec). The 18-digit number is the MEID number. If your phone uses an electronic service number (ESN), ESN replaces MEID.Qualified ServiceIf the problem with your phone persists, return the phone with all accessories and packaging to the dealer for qualified service.Phone AccessoriesTo shop for phone accessories, visit kyocera.superiorcommunications.com.DRAFT
User Guide 77IndexNumerics1-touch dialing, 40Aaccessories, 76headsets, 46T-coil hearing aid, 47TTY device, 47airplane mode, 40set date and time, 39alarm clock, 68, 69snooze duration, 69snooze reminder, 69alertsbrowser, 48calls, 34, 44lights only, 44messages, 59minute, 41missed calls, 41pages, 60roaming, 44, 47, 48scheduler, 68vibrate, 44voice privacy, 47voicemail, 60applicationsdownloading, 73auto-hyphenation, 40Bbacklighting, 43banner, 43batterycharging, 9drain, 10installing, 9recharging, 9safety guidelines, 10Bluetooth, 38activating, 38adding devices, 38changing phone name, 39connecting, 38connecting devices, 38deleting devices, 39OBEX authentication, 39pairing, 38, 39renaming devices, 38visibility, 39bookmarks, 72browseralerts, 48, 59bookmarks, 72launching, 72navigating, 72Ccalculator, 69calendar, see schedulercall history, see call listscall listsall, 23erasing, 24incoming, 23missed, 24outgoing calls, 23saving numbers, 24sending messages, 24DRAFT
78viewing contacts, 24call logs, see call listscall timersall, 25data, 25home, 25incoming, 25outgoing, 25recent, 25roaming, 25caller IDs, 34callsalerts, 44answering, 17any key answer, 41auto answer, 47call lists, 23emergency, 18, 19ending, 17limiting, 49making, 17missed, 41open to answer, 41placing on hold, 41redialing, 17silencing, 18timing, 41voice answer, 46voice commands, 74camera, 63brightness, 64color tone, 64date stamp, 64multishot, 64picture quality, 64resolution, 63self timer, 63shutter sound, 64taking pictures, 63white balance, 64CDMA privacy, 47com port speed, 47contact groups, 30contacts, 26adding, 27adding prefixes, 29assigning alerts, 28, 29assigning pictures, 29calling, 27changing primary number, 29checking memory, 32editing, 28erasing, 30groups, 30number types, 28sending messages, 28sending vCard, 28viewing, 26voice search, 75web addresses, 29contacts list, 26conventions, using this guide, 16countdown timer, 70customer support, 76Ddata counter, 25display, 42brightness, 43language, 43time and date, 43downloads, 73help, 73drafts folder, 53DRAFT
User Guide 79Eearpiece, 17emergency calls, 18, 19emergency services, 48Ffast find, 41flip sounds, 45frequent list, 41Ggroupsadding, 30, 31adding contacts, 29assigning alerts, 31assigning pictures, 31editing, 31erasing, 31, 32sending messages, 30sending vCard, 31viewing, 30groups list, 30Hheadset sounds, 46headsetsauto answer, 47voice answer, 46help, getting, 76hold callsactivating, 40changing message, 41Iicons, 13imageserasing, 36sending, 33inbox, 56incoming calls, 23Internet, 72Kkeypadsetting sounds, 45tone length, 45Llanguage, 43lanyard, 12location information, 48lock code, 49Mmedia filesadding to shuffle, 35assigning, 35details, 35erasing, 36locking, 35modifying, 35online locations, 35playing, 35renaming, 34sending, 35zoom, 35media gallery, 33memopad, 71calling numbers, 71creating memos, 71editing memos, 71erasing memos, 71locking memos, 71sending memos, 71viewing memos, 71memory status, 49menusDRAFT
80contacts, 26custom, 42main, 15media gallery, 33messaging, 50recent calls, 23setting main view, 43settings, 37tools, 65message groups, 31messagesadding addresses, 52adding contacts, 52adding groups, 52adding media files, 54adding preset text, 53, 60adding slides, 54alerts, 59appended, 59attaching contacts, 53attaching notes, 53attaching pictures, 53, 54attaching sounds, 53, 54callback number, 55, 61calling numbers, 57checking status, 58, 59completing drafts, 53creating, 51delivery receipts, 55, 61erasing, 61, 62forwarding, 57incoming calls, 51list view, 60locking, 57online locations, 52playing attachments, 57previewing, 54read receipts, 56recent calls, 52recent list, 52, 61replaying, 58replying, 56, 57saving, 57, 61saving addresses, 52saving attachments, 57saving drafts, 52saving preset text, 53sending later, 55setting priority, 55signature, 60slide intervals, 56sorting, 57unable to send, 59validity period, 55viewing information, 58viewing recipients, 57viewing sender, 57viewing slides, 58web addresses, 57writing language, 54missed calls, 24multimedia, 33multimedia messages, 51auto retrieve, 56, 60CC/BCC fields, 61prompt, 56Nnavigation shortcuts, 11, 42notificationsmessages, 56voicemail, 58number prefixes, 29number types, 28DRAFT
User Guide 81OOBEX authentication, 39outbox, 59outgoing calls, 23Ppagesalerts, 60phoneaccessories, 76answering calls, 17build information, 49changing lock code, 49codes, 27extensions, 27icons, 13, 49locking, 49making calls, 17overview, 11service, 76switching numbers, 48turning on, 17user guide, 49, 76picture messages, see multimedia messagespictureserasing, 36frames, 64sending, 33slideshow, 36taking, 54, 63viewing, 64power on sounds, 45preset text, 53, 60primary number, 29Qquick alarm, 69Rringer shuffleactivating, 44editing, 34, 44viewing, 44ringersassigning, 34roamingalerts, 44, 47, 48restrictions, 48Sscheduler, 66alerts, 68auto erase, 68copying events, 67creating events, 66day view, 67editing events, 67erasing events, 68event priority, 68event reminders, 68finding dates, 67finding events, 67month view, 66sending events, 67silent mode, 68sorting events, 67work hours, 68screensavers, 34, 42security, 49sent messages folder, 58, 61settingsaccessories, 46alarm clock, 69Bluetooth, 39camera, 63DRAFT
82convenience, 39display, 42network, 47scheduler, 44, 45, 68security, 49sounds, 44voice commands, 45silent mode, 44slideshow, 36smart sound, 45soundserasing, 36power, 45recording, 54sending, 34silence all, 44speakerphone, 17, 18speed dial listadding contact, 29editing, 32using, 18stopwatch, 70support, customer, 76symbols, 21TT-coil hearing aid, 47teletype device, 47text entry, 20, 22letters, 20modes, 20, 61numbers, 20rapid entry, 21symbols, 21text messages, 51, 56themes, 43timer, 70tip calculator, 69tools, 65alarm clock, 68calculator, 69memopad, 71scheduler, 66stopwatch, 70timer, 70tip calculator, 69voice memos, 65world clock, 70Uuser guide, 49, 76Vvibrate mode, 44voice commands, 45, 74display results, 46expert mode, 45finding contacts, 75making calls, 74shortcuts, 74voice training, 46voice dial listautomatic add, 45digit lengths, 46editing, 32voice dialing, 18voice memos, 65playing, 34, 65recording, 65voicemailalerts, 60changing number, 61checking, 58configuring, 58volumeDRAFT
User Guide 83adjusting, 18earpiece, 45keypad, 45ringers, 44smart sound, 45speakerphone, 45Wwallpaper shuffleactivating, 42editing, 34, 42time interval, 42viewing, 42wallpapers, 34, 42web browser, 72world clock, 70DRAFT
Kyocera Communications Inc.www.kyocera-wireless.com82-A6238-1EN, Rev. 001DRAFT

Navigation menu