Kyocera KWC-M200 Transmitter Module User Manual 82 M8862 1
Kyocera Communications, Inc Transmitter Module 82 M8862 1
Kyocera >
Contents
user manual part 3
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 513259 |
| Application ID | Kb2O+G6LqUs8zCQ0MGEuSg== |
| Document Description | user manual part 3 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 105.62kB (1320274 bits) |
| Date Submitted | 2005-02-08 00:00:00 |
| Date Available | 2005-02-08 00:00:00 |
| Creation Date | 2005-02-08 10:11:44 |
| Producing Software | Acrobat Distiller 4.0 for Windows |
| Document Lastmod | 2005-02-08 10:11:59 |
| Document Title | 82-M8862-1.book |
| Document Creator | FrameMaker 6.0 |
jçÇìäÉ=qÉëíáåÖ=~åÇ=fåíÉÖê~íáçå UOJjUUSOJN=oÉîK=MMP 11. Conical - Dual-Band for PCS & GPS 68 Manufacture: QUALCOMM Inc. Model Number: CV90-53293 Rated Gain: 1 dBi at 1850 Mhz / 1.6 dBi at 1990 Mhz Kyocera 200 Module Data Book Kyocera Proprietary UOJjUUSOJN=oÉîK=MMP jçÇìäÉ=qÉëíáåÖ=~åÇ=fåíÉÖê~íáçå 12. Multi Mode/Multi Band for Cellular, PCS & GPS Manufacture: QUALCOMM Inc. Model Number: CV90-J2108 Rated Gain: 2.9 dBi at 1850 / 4dBi at 1990 Mhz Module Testing and Integration Kyocera Proprietary Kyocera 200 Module Data Book 69 jçÇìäÉ=qÉëíáåÖ=~åÇ=fåíÉÖê~íáçå UOJjUUSOJN=oÉîK=MMP c~Åíçêó=íÉëíë Each Module undergoes functional testing per specifications using the RF test connector. No radiated tests are performed. The 50 ohm coaxial RF interfaces are verified. The manufactured end item needs to be verified for functionality of the antenna system and audio circuits if used. oÉÖ~êÇáåÖ=ÇÉîÉäçéãÉåí=~åÇ=íÉëíáåÖ=çÑ=lbj=ÇÉîáÅÉ=ìëáåÖ=jçÇìäÉW OEM must follow standards for voice and data as indicated by TIA. OEM must follow standards for AT commands to send data to the Module/phone. OEM may require constant activation of device by desired carrier for ongoing testing. oÉÖ~êÇáåÖ=ÅÉêíáÑáÅ~íáçå=çÑ=ÇÉîáÅÉ=çå=Å~êêáÉêDë=åÉíïçêâ=Ñçê=rKpK=ã~êâÉíW Upon accepting the Module as a tested component to the OEM’s device, the carrier provides direction to the OEM as to further testing that may be required on the OEM’s part. Please note that service providers may require the OEM’s product to pass some basic over-the-air testing before it can be active on a provider’s network. This will ensure the service provider that the network will not be adversely affected during an OEM’s product development. 70 Kyocera 200 Module Data Book Kyocera Proprietary NO jçÇìäÉ=aÉîÉäçéÉêÛë háí The Module Developer’s Kit (MDK) is used to assist in development of end-user applications for the CDMA Module. The MDK facilitates integration through the serial and digital codec pulse code modulation (PCM) interface options. Contents of the MDK are illustrated below. Module and Interface Board 9-pin RS 232 Cable Assembly* (qty: 2) Audio Headset* Travel Charger* Module Documentation** CD-ROM MMCX-to-SMA Adapter (qty: 2) Module Developer’s Kit * Kit may include alternate components. ** Documentation includes Data Book (this document), User’s Guide, and Reference Guide. Kyocera Proprietary Kyocera 200 Module Data Book 71 jçÇìäÉ=aÉîÉäçéÉêÛë háí UOJjUUSOJN=oÉîK=MMP It should be clearly understood that the software in the MDK (specifically, the code in the Kyocera 200 Module User’s Guide, 82-M8863-1) is provided for sample purposes only. The MDK software is not warranted as the basis for a deployed implementation. 72 Kyocera 200 Module Data Book Kyocera Proprietary Warranty and Product Support NP t~êê~åíó=~åÇ=mêçÇìÅí=pìééçêí The KWC CDMA Module Developer’s Kit arrives having been tested as described in the Module Testing & Integration chapter. Testing should be duplicated at the integrator’s/customer’s facility. KWC can provide advice as to the type of test equipment needed. This Module testing should be separate from the testing to be performed on the end product (with the Module installed). KWC offers a warranty for the CDMA Module, from the date of shipment from KWC’s facility. This warranty provides the customer with a remedy for defective Modules within the warranty period and subject to all other warranty provisions. KWC requests that the integrator retain several Modules as backup in case of failure. It is assumed that you maintain a first level of returned Module testing in your QA department prior to returning the Module to KWC. This alleviates the question of whether the failure is in the Module or the end product. “No trouble found” (NTF) occurrences on Modules returned to KWC will result in fees. KWC reserves the right, at its own discretion, to repair, replace, or issue a trade credit for any defective Module under warranty. Warranty repair excludes warranty claims on products that have been subject to misuse, neglect, improper storage or installation, or that have been repaired, modified, or altered by a facility other than a KWC-authorized service center or a KWC-certified repair center. In all cases, the final testing of the KWC line is the sole controlling determination of Module performance. Kyocera Proprietary Kyocera 200 Module Data Book 73 t~êê~åíó=~åÇ=mêçÇìÅí=pìééçêí 74 Kyoera 200 Module Data Book UOJjUUSOJN=oÉîK=MMP Kyocera Proprietary jÉÅÜ~åáÅ~ä=péÉÅáÑáÅ~íáçåë Mechanical Specifications NQ j~íáåÖ=ÅçååÉÅíçêë The following connectors mate with the Module. Module RF Connector Mate Standard MMCX plug, available from several manufacturers including Amp, Radiall, and Telegartner Module Interface Connector Mate Manufacturer: MOLEX Inc., www.molex.com Manufacturer’s Part Number: 54230-0509 Kyocera MCN: 449-24545-0509 Mechanical Specifications Mechanical Specifications 54230-0509 is the tape and reel version with only a fitting nail/solder tab for retention. 54230-0508 is the tape and reel version with fitting nail and pcb peg (goes into the pcb and helps pick and place alignment). Although the -0509 is not on the Molex Web site, it is available. Parts can be ordered based on the manufacturer’s part number, not Kyocera’s internal MCN (Material Control Number). Other suppliers for this part are: Mechanical Specifications eeParts, Inc., http://www.eeparts.com 1150 Hayden Dr, Ste 100 Carrolton, TX 75006 Phone: 469-574-2333/Fax: 469-574-2389 Mechanical Specifications Sager Electronics, http://www.sager.com 97 Libbey Industrial Pkwy Weymouth, MA 02189 Phone: 800-SAGER-800 aê~ïáåÖë The following technical drawings are included in this chapter: Kyocera Proprietary Land pattern and pin assignment for Module interface mating connector Mounting hole and land pattern placement guidelines with recommended mounting hardware Module overall dimensioned drawing Module exploded view Kyocera 200 Module Data Book 75 jÉÅÜ~åáÅ~ä=péÉÅáÑáÅ~íáçåë UOJjUUSOJN=oÉîK=MMP Land pattern and pin assignment for the Module interface mating connector 76 Kyocera 200 Module Data Book Kyocera Proprietary jÉÅÜ~åáÅ~ä=péÉÅáÑáÅ~íáçåë Mechanical Specifications 1.00 .039 51.80 2.039 UOJjUUSOJN=oÉîK=MMP 57.00 2.244 Mechanical Specifications Keep area clear of components and conductive traces 33.75 13.29 4x 2.40 0.94 2x 31.75 1.250 Mechanical Specifications 2x Mechanical Specifications 0.00 50.80 2.000 53.80 2.118 2x 29.17 1.148 3.00 .118 Pin 1 Mechanical Specifications 0.00 8.00 .315 Mounting hole and land pattern placement guidelines Kyocera Proprietary Kyocera 200 Module Data Book 77 jÉÅÜ~åáÅ~ä=péÉÅáÑáÅ~íáçåë UOJjUUSOJN=oÉîK=MMP 56.4 48.2 64.85 11.42 Module interface connector Mounting holes (4X) Module outside dimensions (mm) 78 Kyocera 200 Module Data Book Kyocera Proprietary UOJjUUSOJN=oÉîK=MMP jÉÅÜ~åáÅ~ä=péÉÅáÑáÅ~íáçåë Mechanical Specifications Label Top cover Mechanical Specifications Cover screws (6x) CCA Mechanical Specifications Mechanical Specifications Mounting holes (4X) Module exploded view Mechanical Specifications Kyocera Proprietary Kyocera 200 Module Data Book 79 jÉÅÜ~åáÅ~ä=péÉÅáÑáÅ~íáçåë 80 Kyocera 200 Module Data Book UOJjUUSOJN=oÉîK=MMP Kyocera Proprietary Assignments and Signal Definitions NR ^ëëáÖåãÉåíë=~åÇ=páÖå~ä=aÉÑáåáíáçåë Assignments and Signal Definitions =páÖå~ä=ÇÉÑáåáíáçåë=çÑ=RMJéáå=jçÇìäÉ=áåíÉêÑ~ÅÉ=ÅçååÉÅíçê EfåéìíLçìíéìí=~êÉ=áå=êÉÑÉêÉåÅÉ=íç=jçÇìäÉKF Comment Modem Signal Level Type VPH_PWR Power to the CDMA transceiver 3.6 VDC min to 4.2 VDC max Power input(6) GND Signal and power return GROUND VPH_PWR Power to the CDMA transceiver 3.6 VDC min to 4.2 VDC max GND Signal and power return GROUND VPH_PWR Power to the CDMA transceiver 3.6 VDC min to 4.2 VDC max GND Signal and power return GROUND VPH_PWR Power to the CDMA transceiver 3.6 VDC min to 4.2 VDC max GND Signal and power return GROUND VPH_PWR Power to the CDMA transceiver 3.6 VDC min to 4.2 VDC max 10 GND Signal and power return GROUND 11 VEXT# Indicates that external power is being used 0 to VPH_PWR max Analog control 12 N/C No connection 13 N/C No connection 14 LED_EN# Enable external LED 0 to VPH_PWR max Analog control 15 N/C No connection 16 LED_DRV External LED drive 10 mA LED drive Analog output Kyocera Proprietary Power input(6) Power input(6) Power input(6) Power input(6) Kyocera 200 Module Data Book 81 Assignments and Signal Definitions Pin # Signal Name Assignments and Signal Assignments and Signal Definitions Definitions 50-pin Module interface connector pin assignments (viewed looking down on connector) ^ëëáÖåãÉåíë=~åÇ=páÖå~ä=aÉÑáåáíáçåë UOJjUUSOJN=oÉîK=MMP =páÖå~ä=ÇÉÑáåáíáçåë=çÑ=RMJéáå=jçÇìäÉ=áåíÉêÑ~ÅÉ=ÅçååÉÅíçê EfåéìíLçìíéìí=~êÉ=áå=êÉÑÉêÉåÅÉ=íç=jçÇìäÉKF Pin # Signal Name Comment Modem Signal Level Type 17 N/C No connection 18 XCVR_DET Indicates that transceiver is on 19 N/C No connection 20 N/C No connection 21 XCVR_EN# CDMA transceiver primary 0 to VPH_PWR max power enable Analog input 22 MSM_DP_TXD UART1 - transmit data VOH(min) = 2.4V, VOL(max) = 0.5V Digital output(1) 23 MSM_DP_RXD UART1 - receive data VIH(min) = 1.9V, VIL(max) = 0.9V 24 MSM_DP_CTS# UART1 - clear to send VIH(min) = 1.9V, VIL(max) = 0.9V 25 MSM_DP_RTS# UART1 - ready for receive VOH(min) = 2.4V, VOL(max) = 0.5V Digital output(1) 26 MSM_DP_DTR# UART1 - data terminal ready VIH(min) = 1.9V, VIL(max) = 0.9V Digital input(2,3) 27 MSM_DP_RI# UART1 - ring indicator VOH(min) = 2.4V, VOL(max) = 0.5V 28 MSM_DP_DCD# UART1 - data carrier detect VOH(min) = 2.4V, VOL(max) = 0.5V Digital output(1) 29 HS_PRES# Headset detection input to MSM VIH(min) = 1.9V, VIL(max) = 0.9V Digital input(2,3) 30 GND Signal and power return GROUND 31 MSM_DP_TXD2 UART2 - transmit data VOH(min) = 2.4V, VOL(max) = 0.5V 32 MSM_DP_RXD2 UART2 - receive data VIH(min) = 1.9V, VIL(max) = 0.9V 33 MSM_DP_CTS2# UART2 - clear to send VIH(min) = 1.9V, VIL(max) = 0.9V 34 MSM_DP_RTS2# UART2 - ready for receive VOH(min) = 2.4V, VOL(max) = 0.5V 35 GND Signal and power return GROUND 36 CAR_SCL Analog Carkit SCL line VOH(min) = 2.4V, VOL(max) = 0.5V 37 CAR_SDA Analog Carkit SDA line VOH(min) = 2.4V, VOL(max) = 0.5V 38 CAR_MIC+ Analog carkit microphone input VIH(min) = 1.9V, VIL(max) = 0.9V Analog input(2) 39 CAR_SPKR+ Analog Carkit Speaker output VOH(min) = 2.4V, VOL(max) = 0.5V Analog output(1) 40 GND Signal and power return GROUND 82 Kyocera 200 Module Data Book Digital output(2) Digital input(2) Digital input(2) Digital output(1) Digital output(1) Digital input(2) Digital input(2) Digital output(1) Input/output Input/output(1) Kyocera Proprietary UOJjUUSOJN=oÉîK=MMP ^ëëáÖåãÉåíë=~åÇ=páÖå~ä=aÉÑáåáíáçåë Assignments and Signal Definitions =páÖå~ä=ÇÉÑáåáíáçåë=çÑ=RMJéáå=jçÇìäÉ=áåíÉêÑ~ÅÉ=ÅçååÉÅíçê EfåéìíLçìíéìí=~êÉ=áå=êÉÑÉêÉåÅÉ=íç=jçÇìäÉKF Modem Signal Level Type 41 HS_SPEAKER Headset speaker audio output 1.5Vpp, 8.8mW into 32 ohm load Analog output(1) 42 GND Signal and power return GROUND 43 MAIN_MIC+ Main microphone positive input 1.8VDC nominal, -3Mv rms 44 MAIN_MIC- Handset microphone negative terminal GROUND 45 GND Signal and power return GROUND 46 EAR_SPKR+ Main speaker positive audio output 1.2VDC nominal, 3V pp with pin 47 47 EAR_SPKR- Main speaker negative audio terminal 1.2VDC nominal, 3V pp with pin 46 48 HS_MIC+ Headset microphone input 1.8VDC nominal, ~3Mv rms 49 GND Ground for headset microphone GROUND 50 LSPKR_ON Loudspeaker amp control output VOH(min) = 2.4V, VOL(max) = 0.5V Electret microphone input(4) Bridge amp output(5) Electret microphone input(4) Digital output(2) Notes: 1. Input connected directly to MSM. Do not exceed V(max) of 3.1V; damage to MSM may result. 2. Output connected directly to MSM. Do not exceed V(max) of 2.8V; damage to MSM may result. 3. 10K ohm pull-up resistor inside Module. 4. Input for standard electret microphone. 1.8V supplied via 2.2K ohm resistor inside Module. 5. Pins 46 and 47 are bridge (differential) amp outputs capable of driving 35 mW into a 32 ohm speaker connected between these pins. 6. 1200 mA required for full analog transmission capabilities. Assignments and Signal Assignments and Signal Definitions Definitions Comment Assignments and Signal Definitions Pin # Signal Name Assignments and Signal Definitions Kyocera Proprietary Kyocera 200 Module Data Book 83 ^ëëáÖåãÉåíë=~åÇ=páÖå~ä=aÉÑáåáíáçåë 84 Kyocera 200 Module Data Book UOJjUUSOJN=oÉîK=MMP Kyocera Proprietary Module Developer’s Kit Schematic NS jçÇìäÉ=aÉîÉäçéÉêÛë=háí=pÅÜÉã~íáÅ Module Developer’s Kit Schematic There are two earlier versions of the Module Developer’s Kit (MDK) interface board. If the interface board in your MDK has an identifier of either K4020 or K4021, you may request a schematic diagram by emailing module-support@kyocera-wireless.com. Module Developer’s Kit Schematic Module Developer’s Kit Schematic Module Developer’s Kit Schematic Kyocera Proprietary Kyocera 200 Module Data Book 85 jçÇìäÉ=aÉîÉäçéÉêÛë=háí=pÅÜÉã~íáÅ 86 Kyocera 200 Module Data Book UOJjUUSOJN=oÉîK=MMP Kyocera Proprietary
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Modify Date : 2005:02:08 10:11:59-05:00 Create Date : 2005:02:08 10:11:44-05:00 Title : 82-M8862-1.book Creator : FrameMaker 6.0 Producer : Acrobat Distiller 4.0 for Windows Page Count : 19 Mod Date : 2005:02:08 10:11:59-05:00 Creation Date : 2005:02:08 10:11:44-05:00 Metadata Date : 2005:02:08 10:11:59-05:00EXIF Metadata provided by EXIF.tools