L Bean 0Ksv1 Users Manual RAR802_MANUAL R3
OKSV1 to the manual 4fe66cbc-e8ac-4a52-8586-b1ce65b3dffe
2015-02-05
: L-L-Bean L-L-Bean-0Ksv1-Users-Manual-357979 l-l-bean-0ksv1-users-manual-357979 l-l-bean pdf
Open the PDF directly: View PDF 
.
Page Count: 2
| Download | |
| Open PDF In Browser | View PDF |
1. RESET: Reset unit to default settings MAIN UNIT - SOLAR PANEL 2. °C / °F: Select temperature The solar panel is an energy saving feature, which is an environmentally friendly way to provide additional power to the main unit and prolongs battery life. However, it cannot replace battery power entirely. REMOTE SENSOR Solar First Watch Weather Station with Indoor / Outdoor Temperature Model:0KSV1 2 SENSOR DATA TRANSMISSION 1 4 5 3 USER MANUAL EN To search for a sensor: Press and hold + MODE. The sensor reception icon in the remote sensor area shows the status: ICON DESCRIPTION INTRODUCTION 1. LED status indicator 2. Wall mount hole NOTE Please keep this manual handy as you use your new product. It contains practical step-by-step instructions, as well as technical specifications and warnings you should know about. 3. Battery compartment 4. RESET hole 5. CHANNEL switch OVERVIEW GETTING STARTED Thank you for selecting this Weather Station. FRONT VIEW 1 2 6 Main unit is searching for sensor(s). A channel has been found. The sensor cannot be found. IMPORTANT Set up the remote outdoor sensor first before setting the main unit. TIP The transmission range may vary depending on many factors. You may need to experiment with various locations to get the best results. REMOTE SENSOR – INSERT BATTERIES MANUALLY SET CLOCK The main unit can collect data from up to 3 sensors. To set the clock manually: To set up the sensor: 1. Press and hold MODE. 1. Open the battery compartment. 2. Press 2. Insert the battery, matching the polarities. 3. Press MODE to confirm. 3. Select a channel then press RESET. 4. The settings order is: time zone,12/24 hr format, hour, minute, year, calendar mode (day – month / month – day), month, day and language. 4. Close the battery door. 7 3 8 4 9 5. Place the sensor within 30 m (98 ft) of the main unit using the table stand or wall mount. TIP Ideal placements for the sensor would be in any location on the exterior of the home at a height of not more than 1.5 m (5 ft) and which can shield it from direct sunlight or wet conditions for an accurate reading. 5 2. Remote sensor reception indicator Time zone offset sets the clock +/- 23 hours from the received clock signal time. Select the time zone: (P) Pacific, (E) Eastern, (C) Central or (M) Mountain. NOTE The language options are English (E), German (D), French (F), Italian (I), Spanish (S) and Russian (R). TEMPERATURE 3. Indoor temperature To toggle temperature unit: Press °C / °F. 4. MODE: Change settings / display / : Increase / decrease value; activate / deactivate clock reception signal; : toggle between outdoor channels (1-3) 6. Outdoor temperature 1.5 m (5 ft) 7. Time zone 8. Clock with weekday To toggle between each outdoor sensor’s readings: Press repeatedly. OR Press and hold + MEM for 2 seconds to initiate auto toggle of outdoor channels. . To end press To toggle between current, minimum and maximum records: Press MEM repeatedly. 9. MEM: View current, maximum and minimum temperature BACK VIEW NOTE • Press RESET after each battery change or channel selection. • Use alkaline batteries for longer usage and consumer grade lithium batteries in temperatures below freezing. To clear the records: Press and hold MEM. RESET Press RESET to return to the default settings. PRECAUTIONS • • • MAIN UNIT – INSERT BATTERIES 1 2 RAR802_MANUAL R3.indd 1 to change the settings. To select display mode: Press MODE to choose between clock with seconds, clock with weekday or calendar. 1. Solar panel 5. or 1. Remove the battery compartment. • 2. Insert the batteries, matching the polarities. • 3. Press RESET after each battery change. LOCATION MEANING • Clock / alarm Main unit batteries low • Outdoor temperature Sensor battery low • Do not subject the unit to excessive force, shock, dust, temperature or humidity. Do not cover the ventilation holes with any items such as newspapers, curtains etc. Do not immerse the unit in water. If you spill liquid over it, dry it immediately with a soft, lint-free cloth. Do not clean the unit with abrasive or corrosive materials. Do not tamper with the unit’s internal components. This invalidates the warranty. Only use fresh batteries. Do not mix new and old batteries. Images shown in this manual may differ from the actual display. When disposing of this product, ensure it is 1/6/12 11:40:37 • • • • collected separately for special treatment and not as normal household waste. Placement of this product on certain types of wood may result in damage to its finish for which Oregon Scientific will not be responsible. Consult the furniture manufacturer’s care instructions for information. The contents of this manual may not be reproduced without the permission of the manufacturer. Do not dispose old batteries as unsorted municipal waste. Collection of such waste separately for special treatment is necessary. Please note that some units are equipped with a battery safety strip. Remove the strip from the battery compartment before first use. NOTE The technical specifications for this product and the contents of the user manual are subject to change without notice. NOTE Features and accessories will not be available in all countries. For more information, please contact your local retailer. SPECIFICATIONS TYPE DESCRIPTION MAIN UNIT LxWxH 75 x 33 x 120 mm (2.95 x 1.30 x 4.72 in) Weight 112 g (3.95 oz) without battery Temperature range -5°C/23°F to 50°C/122°F Signal frequency 433 MHz Power 2 x UM-4 (AAA) 1.5 V batteries REMOTE UNIT (THN132N) LxWxH 96 x 50 x 22 mm (3.78 x 1.97 x 0.87 in) Weight 62g (2.22 ounces) Transmission range 30m (98 ft) unobstructed Temperature range -20°C/-4°F to 60°C/140°F (Alkaline batteries) -30°C/-22°F to 60°C/140°F (Lithium batteries) Power 1 x UM-3 (AA) 1.5 V batteries L.L.BEAN GUARANTEE Our products are guaranteed to give 100% satisfaction in every way. Return anything purchased from us at anytime if it proves otherwise. We do not want you to have anything from L.L. Bean that is not completely satisfactory. The L.L. Bean 24hr customer service number is: 1-800-341-4341. P/N:300102858-00003-10 RAR802_MANUAL R3.indd 2 1/6/12 11:40:39
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Page Count : 2 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:343b2d70-3818-11e1-9290-000d93b00e9c Create Date : 2011:12:27 14:51:16Z Metadata Date : 2012:01:06 11:40:40+08:00 Modify Date : 2012:01:06 11:40:40+08:00 Creator Tool : Adobe InDesign CS (3.0) Rendition Class : proof:pdf Derived From Instance ID : e36d8dd7-7246-11e0-b58e-80d4138f689f Derived From Document ID : adobe:docid:indd:adcc9489-71b5-11e0-9ea2-ef4b81edc853 Document ID : adobe:docid:indd:8f2f0957-322c-11e1-aaf7-c2c9560c4720 Manifest Link Form : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream Manifest Reference Instance ID : uuid:2740e7b8-e40e-49b1-8152-b54c81d8de11, uuid:d7d3f1d9-4578-4962-b91d-5827ecf513b7, uuid:70c371df-b812-4095-9671-f1341cd02c37, uuid:35ffed80-ed8b-11db-a53f-000a95cf62c0 Manifest Reference Document ID : uuid:1ca9b967-9f16-4390-9a46-9b0d45589368, uuid:dcd39943-883f-40db-9267-239e6a747104, uuid:5183af52-177b-47fa-ad0a-a6dde287cbc9, uuid:35ffe412-ed8b-11db-a53f-000a95cf62c0 Format : application/pdf Title : RAR802_MANUAL R3.indd Trapped : False Creator : Adobe InDesign CS (3.0) Producer : Adobe PDF Library 6.0EXIF Metadata provided by EXIF.tools