L and Y Audio LB271H BLUETOOTH SPEAKER User Manual

Shenzhen L&Y; Aduio Co., LTD BLUETOOTH SPEAKER

User Manual

Download: L and Y Audio LB271H BLUETOOTH SPEAKER User Manual
Mirror Download [FCC.gov]L and Y Audio LB271H BLUETOOTH SPEAKER User Manual
Document ID2528717
Application IDQUG1s6xWoh6FRCLHk2EMmQ==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize16.93kB (211605 bits)
Date Submitted2015-02-10 00:00:00
Date Available2015-02-10 00:00:00
Creation Date0000-00-00 00:00:00
Producing SoftwareAcrobat Distiller 7.0 (Windows)
Document Lastmod0000-00-00 00:00:00
Document TitleVox(LB-271)璇存槑涔?.01.LB271H00Y
Document CreatorPScript5.dll Version 5.2
Document Author: Administrator

b.When most branded Bluetooth devices are connected,the Bluetooth device
can control the play/pause/previous song/next song functions.
c.The device supports Hands Free Profile.With support for HFP.the device can
Installation:
Product Introduction:
control a paired mobile phone in order to make and receive hands-free voice calls
1. Press STANDBY button to switch the unit on and the standby indicator will light up.
2. Insert audio cable into LINE IN and the device will switch to LINE IN mode
automatically.
3. When you have finished listening,press the STANDBY button on the front panel
to turn it off. The power indicator will switch off and the machine wll go into
User Manual
1.Standby mode
2.Hands-free/Play/Pause
3.Volume 4.Volume +
Model:Vox
5.Line in
6.USB 5V recharge
7.DC input 15V
Trade Mark: DREAMWAVE
Thank you for purchasing Vox BLUETOOTH SPEAKER!
Vox built in bluetooth V4.0 with 20watts output.The compact size easy to carry
*Enjoy music playback for up to 20
hours at 50% of max volume output.
out and enjoy the music from smart phone everywhere .Hope you will like it!!
www.godreamwave.com
LINE IN
5V
1A POWER OUT
15V
DC IN
Use of the power bank function will
decrease playback time .Dreamwave
will not ensure compatibility with third
party devices or charging cables
Due to continuous product development,
specifications may be subject to
change without prior notification.
standby mode.
4. Bluetooth instruction guide:
a.When the product is in buletooth mode ,it will automatically pair with the last paired
device and the LED will blink twice per second.Once it is paired the LED will blink once
every two seconds
b. When a device does not pair within 20 seconds,press the PLAY/PAUSE button for
three seconds.The LED will blink twice per second and it will start to search for devices .
Once the device name Vox is selected for pairing,a password prompt will be
displayed.To connect,key in password “0000” The LED will blink once every two
seconds once the connection is successful.
c. To disconnect a paired device,press PLAY/PAUSE button for three seconds.
Note that transmission works within a distance of 10 meters.
5. Hands free profile:
After the mobile phone is paired to the device press the PLAY/PAUSE button to
receive incoming calls.Stay within 20-30 cm of the device for better communication.
Press PLAY/PAUSE again to end the call. To decline an incoming call, press the
PLAY/PAUSE button for seconds .Press twice to redial the last call.
6. Bluetooth indicator status:
a.When reconnecting to the last paired device,the LED will blink twice per second.
d. Smart saving power features:This device has micro-controllers for smart power
saving.When the device detects no input signals for 5 minutes,it will enter into
standby mode in order to save power.
b. Once the device is successfully paired, the LED will blink once every two seconds.
c.When searching for a device,the LED will blink once every second.
LINE IN
5V
1A POWER OUT
15V
DC IN
7. Failure problems:
a.When there is a failure while searching for devices,turn the power off and then
on again.Wait 20 seconds until the LED starts to blink once every second and the
RECOMMENDED USE
product will start to search for devices again.
b.When you are not ablle to pair a new device,turn off the last paired device in order
to pair the new device.
8. Attention:When the machine is in Bluetooth mode and a Bluetooth device is
disconnected or powers off, ensure that you wait for more than 30 seconds before
MENU
PC / DVD Player / iPod / CD / MP3
trying to reconnect.
9. Insert the power jack into the DC input to charge the machine. It takes
approximately 6 hours to fully charge the machine and it can be charged while
playing music.While charging,the power indicator will blink and it will stop blinking
when charging is complete
NOTE:
Insert the plugs fully into the jacks. Loose connections may produce a
humming sound or other noise interference.
Connection instructions
NOTE:
The original adaptor must be used to charge the product as other adaptors
will damage the device.
a.Most branded.Bluetooth devices that have previously been paired with this Bluetooth
speaker will automatically re-connect. If your mobile phone does not automatically
re-connect then you must connect manually.
1.Insert 3.5 mm signal audio input jack.
2.Insert the mini USB cable from the machine into the devices USB jack to charge.
Note:Battery performance varies with the content played and loudness at which it is
played.In typical usage,the speaker battery lasts up to four hours.
Note:
*If the device is not connected to the Bluetooth speaker,please shut down and
several seconds after the restart,and connect with the Bluetooth speaker.
The speaker automatically shut down after 30 minutes when no device to connect
the Bluetooth speaker or no music playing.
Trouble shooting
Vox X 1
User guide X 1
●
●
3.5mm AUX cable X 1
Applicable To: All DreamWave Bluetooth speakers
The trouble shooting steps in this article apply if audio is intermittent,
crackling or distorted when streaming via Bluetooth.
AC adapter X 1
1.Try playing other audio files. Ensure that audio can play fine from the same audio device
when using a headphone.
Charge cable X 1
2.If Step 1 is not the case, try listening to audio by connecting the speaker to the
Bluetooth device using the Aux-in cable. This will isolate if it's a Bluetooth connection
issue or not. Remember to disconnect/un-pair the Bluetooth connection first.
Vox
3.If the issue only happens when connecting via Bluetooth, do the following:
Technical information
a.Make sure what you are connecting is this speaker ( select “Vox” within the
Bluetooth list on your device )
b.Make sure the volume is not in the minimum
c.Adjust the distance between the speaker and the Bluetooth device.
Power: 20w
HFC Function(Hands Free Call )
d.Reset the speaker to its factory default settings.
e.Clear the current pairing entry from your Bluetooth device.
f.To isolate ,close other devices Bluetooth
V4.0, A2DP AVECP
Rechargeable li-ion battery
6000mAh, up to 18hours
play time at about 2/3 of
full volume,7 hours at max
volume.full bass stabus.
USB port 5V/1A output rechargeable
power bank for mobile devices
10
20
g.Try re-pairing the speaker and the Bluetooth device.
4.If the issue happens when connecting either on Bluetooth or Aux-in, please contact
DreamWave Customer Support via email.
FCC Warning:
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
・ Reorient or relocate the receiving antenna.
・ Increase the separation between the equipment and receiver.
・ Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
・ Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer
could void your authority to operate this equipment.
CAUTION
This symbol indicates that there are important operation & maintenance
instructions in the literature accompanying this unit.
RISK OF ELECTRIC SHOCK,DO NOT OPEN
This symbol indicates that there are important operation & maintenance
instructions in the literature accompanying this unit.
WARING
To reduce the risk of fire or electrical shock,do not expose this product to rain or
moisture.The product must not be exposed to dripping and splashing and no object
filled with liquids-such as a vase of flowers-should be placed on the product.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approves by the manufacturer could void
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled
environment. This device and its antenna must not be located or operating in conjunction
with any other antenna or transmitter.
CAUTION the user is authority to operate this device.
The device has been evaluated to meet general RF exposure requirement. The device can be
used in portable exposure condition without restriction.
CAUTION To prevent,electric shock ,match wide blade of plug to wide slot,full insert.
SIZE:120x120x264mm
NET Weight: 1.9 kg
2 full range,2passive driver,
2 tweeter HI-FI digital amplifier,
360° omnidirectional sound,
Anti-Distortion circuitry.
FCC ID: 2AD2BLB271H

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Creation Date--Text             : 
Mod Date--Text                  : 
Create Date                     : 2015:02:05 14:55:11+08:00
Modify Date                     : 2015:02:05 14:55:11+08:00
Metadata Date                   : 2015:02:05 14:55+08:00
Creator Tool                    : PScript5.dll Version 5.2
Thumbnail Width                 : 256
Thumbnail Height                : 144
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 17991 bytes, use -b option to extract)
Document ID                     : uuid:49F47BE703ADE4118F9AD60834676278
Instance ID                     : uuid:b2f5f069-e46e-433a-ba21-aaa3171f7ec7
Derived From Instance ID        : uuid:382053fd-e185-4ddb-902a-65925e81cf01
Derived From Document ID        : xmp.did:BD1BD94C45ACE411A842C11C494C2735
Derived From Rendition Class    : proof:pdf
N Pages                         : 1
Has Visible Transparency        : False
Has Visible Overprint           : False
Max Page Size W                 : 486.902235
Max Page Size H                 : 406.494396
Max Page Size Unit              : Millimeters
Font Name                       : Arial-BoldMT, ArialMT, AvantGardeITCbyBT-Book, RTWSYueGoTrial-Light, AdobeSongStd-Light
Font Family                     : Arial, Arial, AvantGarde Bk BT, 造字工房悦黑体验版, Adobe 宋体 Std
Font Face                       : Bold, Regular, Book, 细体, L
Font Type                       : Open Type, Open Type, TrueType, Open Type, Open Type
Font Version                    : Version 3.00, Version 3.00, mfgpctt-v1.52 Tuesday, January 12, 1993 3:55:26 pm (EST), Version 1.000;PS 1;hotconv 1.0.57;makeotf.lib2.0.21895, Version 1.002;PS 1;Core 1.0.38;makeotf.lib1.6.6565
Font Composite                  : False, False, False, False, False
Font File Name                  : ARIALBD.TTF, ARIAL.TTF, TT0154M_.TTF, RTWSYueGoTrial-Light.otf, AdobeSongStd-Light.otf
Plate Names                     : Cyan, Magenta, Yellow, Black
Swatch Groups Group Name        : 默认色板组
Swatch Groups Group Type        : 0
Swatch Groups Colorants Swatch Name: AutoCAD Color 1
Swatch Groups Colorants Type    : PROCESS
Swatch Groups Colorants Tint    : 100.000000
Swatch Groups Colorants Mode    : RGB
Swatch Groups Colorants Red     : 0
Swatch Groups Colorants Green   : 0
Swatch Groups Colorants Blue    : 0
Format                          : application/postscript
Title                           : Vox(LB-271)璇存槑涔?.01.LB271H00Y
Creator                         : Administrator
Page Count                      : 1
Author                          : Administrator
EXIF Metadata provided by EXIF.tools
FCC ID Filing: 2AD2BLB271H

Navigation menu