L and Y Audio LB282 BLUETOOTH SPEAKER User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2528579
Application ID	AQ1lkYHhWfLCGi/aixAOsQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	21.16kB (264506 bits)
Date Submitted	2015-02-10 00:00:00
Date Available	2015-02-10 00:00:00
Creation Date	2015-02-05 15:26:01
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2015-02-05 15:26:01
Document Title	Bubble Pods(LB-282)璇存槑涔?.01.LB28200AY
Document Creator	PScript5.dll Version 5.2
Document Author:	Administrator

Product Introduction
Technical information
Power on/off
Press the button “
User Guide
Power: 5w
Micphone
HFC Function（Hands Free Call )
Volume+
LED indicator
Bluetooth key
(Bluetooth: Blue LED
(LINE IN: Red LED)
” to turn the speaker on or off.
Pairing and connecting bluetooth devices
1.Press the “
” key to turn on the power, the blue LED will flash.
Then speaker step into pairing mode waiting for pair automatically.
V4.0, A2DP AVECP
Power
Model: Bubble Pods
Trade Mark: DREAMWAVE
Thank you for purchasing Bubble Pods BLUETOOTH SPEAKER!
Bubble Pods built in bluetooth V4.0 with 5watts output.The compact size easy to carry
out and enjoy the music from smart phone everywhere .Hope you will like it!!
45 mm driver,
360° omnidirectional sound effect
Volume-
Charge led
DC 5V
Rechargeable li-ion battery
1800mAh, 5 hours at max
volume.full bass status
SIZE:100x78x46mm
IPX5
NET Weight: 0.185 kg
10
20
2. Turn your Bluetooth device connection on,then searching the “Bubble Pods” on your
device list.
4.The speaker indicates pairing is complete when the Bluetooth indicater changes from flash
to slow flash and the speaker emits a tone.
5.Due to safety issue,the initial volume will be min every time power on. Please adjust the
volume from button.
6. Once the connection complete,the speaker will connect to latest device automatically.
7. Bubble Pods include microphone.Once you have income call, the music will pause automatically.
Then press“
”to pick up the phone call .When phone call complete,the music will play
again.
8. When music play.you also can press“
”to pause/play the music.
Note:Most standard Bluetooth device can connect with Bubble Pods automatically.
But few some mobile phones should be connected by manually.
3. After find the “Bubble Pods”,please connect with the speaker.After connection
complete,Then you are ready to enjoy the music from Bubble Pods.
Using the LINE IN the connector
A stereo audio cable with 3.5 mm plugs each end is required connect the audio output of
PC or MP3/CD –players,ect device to the LINE IN input on the speaker.
Adjust the volume on the connected device to near maximum,then use the Bubble Pods speaker
volume buttons to adjust the volume level.
Special features
1. Bluetooth wireless signal transmission protocol.
2. Line in input,compatible with PC,MP3/CD,mobile devices and other audio sources.
3.Support phone hands-free.
Battery Charging
Recommended charging time is three hours to fully charge the battery. The indicator of the
charging status lights When the battery charging .Charging status lights went out When the
battery full charge. Connect it to DC 5V IN to reactivate the speaker when the speaker not
turn on.
Note:Battery performance varies with the content played and loudness at which it is played .
In typical usage, the speaker battery lasts up to four hours.
Note：
*If the device is not connected to the Bluetooth speaker ,please shut down and several
seconds after the restart , and connect with the Bluetooth speaker .
LINE IN
www.godreamwave.com
CAUTION
How It Works
Charging speaker
(Red LED light until complete charging)
Trouble shooting
Wire connection
●
●
Applicable To: All DreamWave Bluetooth speakers
The trouble shooting steps in this article apply if audio is intermittent,
crackling or distorted when streaming via Bluetooth.
Bubble Pods X 1
Micro USB to USB cable X 1
AUX cable X 1
Recommended use
PC/DVD Player/iPod/CD Player/MP3
User guide X 1
1.Try playing other audio files. Ensure that audio can play fine from the same audio device
when using a headphone.
2.If Step 1 is not the case, try listening to audio by connecting the speaker to the
Bluetooth device using the Aux-in cable. This will isolate if it's a Bluetooth connection
issue or not. Remember to disconnect/un-pair the Bluetooth connection first.
3.If the issue only happens when connecting via Bluetooth, do the following:
a.Make sure what you are connecting is this speaker ( select “Bubble Pods” within the
Bluetooth list on your device )
b.Make sure the volume is not in the minimum
c.Adjust the distance between the speaker and the Bluetooth device.
d.Reset the speaker to its factory default settings.
e.Clear the current pairing entry from your Bluetooth device.
f.To isolate ,close other devices Bluetooth
g.Try re-pairing the speaker and the Bluetooth device.
4.If the issue happens when connecting either on Bluetooth or Aux-in, please contact
DreamWave Customer Support via email.
FCC Warning:
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
・ Reorient or relocate the receiving antenna.
・ Increase the separation between the equipment and receiver.
・ Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
・ Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer
could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled
environment. This device and its antenna must not be located or operating in conjunction with
any other antenna or transmitter.
The device has been evaluated to meet general RF exposure requirement. The device can be
used in portable exposure condition without restriction.
This symbol indicates that there are important operation & maintenance
instructions in the literature accompanying this unit.
RISK OF ELECTRIC SHOCK,DO NOT OPEN
This symbol indicates that there are important operation & maintenance
instructions in the literature accompanying this unit.
To reduce the risk of fire or electrical shock,do not expose this product to rain or
WARING moisture.The product must not be exposed to dripping and splashing and no object
filled with liquids-such as a vase of flowers-should be placed on the product.
CAUTION Changes or modifications not expressly approves by the manufacturer could void
the user is authority to operate this device.
CAUTION To prevent,electric shock ,match wide blade of plug to wide slot,full insert.
FCC ID :2AD2BLB282

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-701
Startup Profile                 : Print
Producer                        : Acrobat Distiller 7.0 (Windows)
Create Date                     : 2015:02:05 15:26:01+08:00
Modify Date                     : 2015:02:05 15:26:01+08:00
Metadata Date                   : 2015:02:05 15:25:52+08:00
Creator Tool                    : PScript5.dll Version 5.2
Thumbnail Width                 : 256
Thumbnail Height                : 52
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 8337 bytes, use -b option to extract)
Document ID                     : uuid:B7BB3D3708ADE411B32EC2345DD0B781
Instance ID                     : uuid:f5ccea67-492d-41e9-aa11-de57c9720655
Derived From Instance ID        : uuid:4d401610-1612-4e60-a70d-085814069bab
Derived From Document ID        : xmp.did:BF1BD94C45ACE411A842C11C494C2735
Derived From Rendition Class    : proof:pdf
Has Visible Overprint           : False
Has Visible Transparency        : False
N Pages                         : 1
Max Page Size W                 : 690.871181
Max Page Size H                 : 365.477778
Max Page Size Unit              : Millimeters
Font Name                       : ArialMT, RTWSYueGoTrial-Light, AdobeSongStd-Light
Font Family                     : Arial, 造字工房悦黑体验版, Adobe 宋体 Std
Font Face                       : Regular, 细体, L
Font Type                       : Open Type, Open Type, Open Type
Font Version                    : Version 3.00, Version 1.000;PS 1;hotconv 1.0.57;makeotf.lib2.0.21895, Version 1.002;PS 1;Core 1.0.38;makeotf.lib1.6.6565
Font Composite                  : False, False, False
Font File Name                  : ARIAL.TTF, RTWSYueGoTrial-Light.otf, AdobeSongStd-Light.otf
Plate Names                     : Cyan, Magenta, Yellow, Black
Swatch Groups Group Name        : 默认色板组
Swatch Groups Group Type        : 0
Swatch Groups Colorants L       : 56.078400
Swatch Groups Colorants A       : 59
Swatch Groups Colorants B       : 44
Swatch Groups Colorants Swatch Name: 新建颜色色板
Swatch Groups Colorants Type    : PROCESS
Swatch Groups Colorants Tint    : 100.000000
Swatch Groups Colorants Mode    : CMYK
Swatch Groups Colorants Cyan    : 0.000000
Swatch Groups Colorants Magenta : 0.000000
Swatch Groups Colorants Yellow  : 0.000000
Swatch Groups Colorants Black   : 100.000000
Format                          : application/postscript
Title                           : Bubble Pods(LB-282)璇存槑涔?.01.LB28200AY
Creator                         : Administrator
Page Count                      : 1
Author                          : Administrator

EXIF Metadata provided by EXIF.tools