LANKE XUNTONG TECHNOLOGY PTR5528 Bluetooth low energy 4.0 modules User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3303533
Application ID	6Gav4aY2T+hUWGm9jAf1bQ==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	24.57kB (307170 bits)
Date Submitted	2017-03-03 00:00:00
Date Available	2017-03-03 00:00:00
Creation Date	2017-12-24 15:09:17
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-12-24 15:09:17
Document Title	Users Manual
Document Creator	Acrobat PDFMaker 11 Word 版
Document Author:	MCU

PTR5528
Bluetooth Low Energy 4.0 Module
Fingertip-size Bluetooth Low Energy System on Module
Embedded Cortex™ M0 32 bit processor
The PTR5528 ultra-low power Bluetooth Low Energy/2.4GHz Proprietary Multi-protocol
modules based on the nRF51822 from Nordic Semiconductor. The module with an ARM®
Cortex™ M0 32 bit processor, embedded 2.4GHz transceiver, and integrated antenna,
provide a complete solution with no additional RF design, allowing faster time to market,
while simplifying designs, reducing BOM costs, also reduce the burden of Regulatory
approvals to enter the world market. Making you more quickly into the Bluetooth smart
application and remove the worries
Features

System on Module(SOM) base on Nordic nRF51822

Bluetooth Low Energy/2.4GHz Proprietary Multi-protocol support

Complete Bluetooth Low Energy stack/profiles solution (Bluetooth 4.x and Higher)

ARM® Cortex™-M0 32 bit processor, 256 kB flash memory, 16 kB RAM

2.4 GHz transceiver, Max TX Power +4dBm, -93 dBm sensitivity@BLE

11 General Purpose I/O, Configurable mapping Pins, Simple layout of external application

Internal RC Oscillator 32.768 kHz(± 250 ppm).

Flexible real-time counter and Two 16 bit and one 24 bit timers with counter mode

AES Coprocessor, Random Number Generator ,Watchdog Timer ,Temperature sensor

Rich set of Peripheral: ADC, SPI, 2-wire , and UART. Programmable Peripheral Interconnect(PPI)

Internal RC Oscillator 32.768 kHz(± 250 ppm).

Ultra small fingertip size, about 11.5mmx9mmx1.5mm with Antenna.
COPYRIGHT ©2016 ALL RIGHTS RESERVED
XunTong Tech
TEL: +86 755 26675941
E-mail: nrf@freqchina.com
Typical Applications:
















- 2.4 GHz Bluetooth low energy systems
- Proprietary 2.4 GHz systems
- Sports and leisure equipment
- Mobile phone accessories
- Health Care and Medical
- Consumer Electronics, Game pads
- Human Interface Devices, Remote control
- Building environment control / monitoring
- RFID, Security Applications
- Bluetooth Low Energy GateWay
- iBeacons™, Eddystone™, Indoor navigation
- Low-Power Sensors
- Connected Appliances
- Lighting Products
- Fitness devices
- Wearables
Quick Specifications:
Bluetooth
Version
Bluetooth 4.x and Higher
Security
AES-128
Radio
Frequency
2.400GHz to 2.4835 GHz
Modulations
GFSK at 250Kbps，1 Mbps, 2 Mbps data rates
Transmit power
MAX +4 dBm RF output
Receiver sensitivity
-93 dBm (BLE mode)
Antenna
On board
Current Consumption
TX @ +4 dBm
~16 mA
TX @ 0 dBm
~10.5 mA
TX @ -4 dBm
~8 mA
TX @ -16 dBm
~6 mA
TX @ -20 dBm
~5.5 mA
RX only @ 1 Mbps
~13 mA
MCU running @16MHz code from Flash
~4.4 mA
MCU running @16MHz code from RAM
~2.4 mA
SYSTEM ON
~2.3 uA
SYSTEM OFF
~420 nA
Operating conditions
Power supply
1.9~3.6V
Operating temperature
-25~+85 °C
COPYRIGHT ©2016 ALL RIGHTS RESERVED
XunTong Tech
TEL: +86 755 26675941
E-mail: nrf@freqchina.com
Pin Description of Module（Top View）:
Pin No.
10
11
12
13
14
15
16
Name
P0.18
SWCLK
SWDIO
P0.09
P0.08
P0.05
P0.03
P0.02
P0.00
P0.27
P0.26
P0.24
P0.21
VCC
GND
ANT
Description
Note
I/O
Debug and flash programming
Debug and flash programming
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
Power Suply（1.9～3.6V）
Power Ground
EXT ANTENNA
COPYRIGHT ©2016 ALL RIGHTS RESERVED
XunTong Tech
ADC IN 6
ADC IN 4
ADC IN 3
ADC IN 1
ADC IN 0
Can connect to ext antenna if need.
TEL: +86 755 26675941
E-mail: nrf@freqchina.com
Block diagram:
General Purpose I/O:
The general purpose I/O is organized as one port enabling access and control of the 32 available
GPIO pins through one port. Each GPIO can be accessed individually with the following user
configurable features:
 Input/output direction
 Output drive strength
 Internal pull-up and pull-down resistors
 Wake-up from high or low level triggers on all pins
 Trigger interrupt on all pins
 All pins can be used by the PPI task/event system; the maximum number of pins that can be
interfaced through the PPI at the same time is limited by the number of GPIOTE channels
 All pins can be individually configured to carry serial interface or quadrature demodulator
signals
HW debug and flash programming of Module:
The Module support the two pin Serial Wire Debug (SWD) interface and offers flexible and powerful
mechanism for non-intrusive debugging of program code. Breakpoints, single stepping, and
instruction trace capture of code execution flow are part of this support.
Pin
Flash Program interface
SWDIO
Debug and flash programming I/O
SWCLK
Debug and flash programming I/O
This is the hardware debug and flash programming of module, J-Link Lite support, please refer
www.segger.com.
COPYRIGHT ©2016 ALL RIGHTS RESERVED
XunTong Tech
TEL: +86 755 26675941
E-mail: nrf@freqchina.com
PCB Layout（TOP VIEW）:
Recommended RF Layout & Ground Plane:
The module integrated antenna requires a suitable ground plane to radiate effectively. The area
under and extending out from the antenna portion of the module should be kept clear of copper and
other metal. The module should be placed at the edge of the PCB with the antenna edge facing out.
Reducing the ground plane will reduce the effective radiated power.
COPYRIGHT ©2016 ALL RIGHTS RESERVED
XunTong Tech
TEL: +86 755 26675941
E-mail: nrf@freqchina.com
Ordering Information:
Part Number
Description
PTR5528
Bluetooth Low Energy System on Module
PTR5528-EVB
Evaluation boards for module，with key, LED, I/O extend，sock
for coin cell battery.
Absolute Maximum Ratings:
Symbol
VCC_MAX
VIO_MAX
VIO_MAX
TS
Parameter
Voltage on supply pin
Voltage on GPIO pins (VCC > 3.6V)
Voltage on GPIO pins (VCC ≤ 3.6V)
Storage Temperature Range
Min.
Max.
Unit
-0.3
-0.3
-0.3
-40
3.9
3.9
VCC + 0.3V
125
°C
Important Notice:



Reserves the right to make corrections, modifications, and/or improvements to the product and/or
its specifications at any time without notice.
Assumes no liability for the user’s product and/or applications.
Products are not authorized for use in safety-critical applications, including but not limited to
life-support applications.
ATTENTION!
Electrostatic Sensitive Device
Observe Precaution for handling.
COPYRIGHT ©2016 ALL RIGHTS RESERVED
XunTong Tech
TEL: +86 755 26675941
E-mail: nrf@freqchina.com

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 1
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:f7974a52-9f8d-11f2-0000-02c7314339d4
Producer                        : GPL Ghostscript 9.18
Modify Date                     : 2017:07:13 02:17:28Z
Create Date                     : 2017:07:13 02:17:28Z
Creator Tool                    : UnknownApplication
Document ID                     : uuid:f7974a52-9f8d-11f2-0000-02c7314339d4
Format                          : application/pdf
Title                           : Untitled

EXIF Metadata provided by EXIF.tools