LCN 1460 Drop Plate Installation Guide LCN1460Drop Instructions
User Manual: LCN LCN 1460 Drop Plate Installation Guide Installation Guide
Open the PDF directly: View PDF 
.
Page Count: 7
| Download | |
| Open PDF In Browser | View PDF |
*28460* 1460 Series 28460 Drop Plate Installation Instructions Pull side Arm Mounted On: 1461-18 Drop Plate 1461-18FC Drop Plate 1461-18DS1 Drop Plate 1461 PULL SIDE (DOOR MOUNT) DROP PLATES 115 16 1 7 16 11 14 = UPTO 110° 1 8 4 = 111°TO 180° 1 2 5 12 2 38 7 = UPTO 110° 4 = 111°TO 180° 2 38 Left Hand Door Shown Right Hand Door Opposite Push Side Arm Mounted On: 1461-18 Drop Plate 1461 PUSH SIDE (TOP JAMB) DROP PLATES 7 34 = UPTO 110° 4 18 = 111°TO 180° 1 2 2 38 5 12 2 38 1 2 2 38 11 58 = UPTO 110° 7 7 8 = 111°TO 180° 115 16 Left Hand Door Shown Right Hand Door Opposite 7 16 1 2 3 1 15 3 1 1 14 1 2 116 2 8 2 4 11 13 25 4 18 5 12 4 32 38 49 60 70 102 7 7 34 7 78 8 14 11 14 11 58 12 34 105 140 178 197 200 210 286 295 324 1461-18 1461-18FC 1461-18DS1 General Notes: 1. On Top Jamb & Hinge Face Mounts. Locate Closer & Shoe From CL Of Pivot or Swing Clear Hinge Pin When Used. 2. On Top Jamb Mounting When Overhead Stop is Used, Shoe Must Be Lowered To Clear Holder. 3. For 180° Opening On Hinge Face Mounts, Max Buttsize Is 5" X 5" 4 Reinforcing Per ANSI/SDI-100 Recommended For Hollow Metal Doors and Frames. 5. Closer Size Is 12 34 x 2 34 x 2 38 Customer Service 1-877-671-7011 www.allegion.com Push Side Parellel Arm Mounted On: 1461-18PA Drop Plate 1461FC-18PA Drop Plate 1461-PADS1 Drop Plate P1461 Push Side (Door Mount) Drop Plates 11 116 1161 11 116 11 16 5 16 1 34 1161 11 14 = Upto 100° 8 34 = 101°to 180° 7 8 1 2 5 14 = Upto 100° 2 3 4 = 101°to 180° 2 38 5 12 2 38 Left Hand Door Shown Right Hand Door Opposite 5 16 8 3 1 2 1 2 13 5 1 4 11 16 7 8 17 22 5 1 2 8 3 4 3 3 11 1161 116 1 34 2 8 2 4 27 43 44 60 70 1 112 12 34 89 133 140 222 292 324 1461-18PA 1461FC-18PA 1461-PADS1 General Notes: 1. On Top Jamb & Hinge Face Mounts. Locate Closer & Shoe From CL Of Pivot Or Swing Clear Hinge Pin When Used. 2. On Top Jamb Mounting When Overhead Stop Is Used, Shoe Must Be Lowered To Clear Holder. 3. For 180° Opening On P1460, Max Butt Size Is 5" X 5", Max. Reveal For P1460 Mount Is 3 1/2. 4 Reinforcing Per ANSI/SDI-100 Recommended For Hollow Metal Doors And Frames. 5. Closer Size Is 12 34 X 2 34 X 2 38 1461 Cush Drop Plates 11 116 Push Side, Parellelarm Mounted On: 1461-18PA Drop Plate 1461FC-18PA Drop Plate 1461-PADS1 Drop Plate 11 116 1161 1161 5 16 11 16 2 38 3163 5 12 11 169 = 85° 11 161 = 90° 1461-18PA 10 169 = 95° 7 8 1 2 2 38 5 12 1461FC-18PA 2 38 3 3 8 = 85° 2 5 8 = 90° 2 18 = 95° Lefthand Door Shown Righthand Door Opposite 1461-PADS1 Push Side, Parallel Arm Mounted For Spring Cush Drop Plates 11 116 1 1 16 11 116 1161 9 16 15 16 2 58 3167 11 169 = 85° 11 161 = 90° 10 169 = 95° 1 2 5 12 2 38 3 3 8 = 85° 2 5 8 = 90° 2 1 8 = 95° 7 8 2 38 Lefthand Door Shown Righthand Door Opposite 5 34 General Notes: 1. If door is hung on pivots Locate closer and shoe from CL of pivot point. 2. Closer size 12 1/4 x 2 3/4 x 2 3/8. 3.Top rail less than 4 3/4 Requires drop plate. 4.All dimensions applicable For hold open or dead stop. 5. Delayed action optional. 6. Reinforcing per. ANSI/SDI-100 Recommended for hollow Metal door and frames. 7. 5/8 maximum allowable side Stop. 8. Using fasters prodvided Mount drop plate with (4) 1/4 - 14 x 1 3/8 S.R.T. Mount closer to drop plates (4) 1/4 - 20 x 1/2 P.H.M.S. Increase this dimension to 15/16 for spring cush FC * 1461 EDA Drop Plates 11 116 1 1 16 Push Side, Parellel Arm Mounted On: 1461-18PA Drop Plate 1461FC-18PA Drop Plate 1461-PADS1 11 116 1161 5 16 11 16 1 34 5 12 5 10 8 1 2 2 14 2 38 1 52 7 8 2 38 Left Hand Door Shown Right Hand Door Opposite 1461-18PA 1461FC-18PA 1461-18PADS1 General Notes: 1. If door is hung on pivots locate closer and shoe from c of pivot point. (consult L factory if using swing clear hinges.) 2. Closer size 12 1/4 x 2 3/4 x 2 3/8. 3. Top rail less than 4 3/4 requires drop plate. 4. All dimensions applicable for hold open. 5. Delayed action optional. 6. Reinforcing per ANSI/SDI-100 recommended for hollow metal door and frames. 7. 5/8 maximum allowable side stop. 8. Using fasters provided mount drop plate with (4) 1/4 - 14 x 1 3/8 S.R.T. mount closer to drop plates with (4) 1/4 - 20 x 1/2 p.H.M.S. Max. Butt hinge size 5 x 5. Pull Side Arm Mounted On: 1461-18 Drop Plate 1461-18FC Drop Plate 1461-18DS1 Drop Plate 1460T/1461T Pull Side (Door Mount) Drop Plates 21 34 3 7 8 7 16 1 2 2 38 415 16 5 12 1 8 2 38 Right Hand Door Shown Left Hand Door Opposite Push Side Arm Mounted On: 1461-18 Drop Plate 1461-18FC Drop Plate 1461 Pull Side (Top Jamb) Drop Plates 2 2 38 5 12 2 38 1 2 1 2 13 16 2 58 1 8 21 34 Right Hand Door Shown Left Hand Door Opposite 1 8 3 7 16 11 1 2 13 13 16 7 8 1 3 3 3 4 15 16 5 2 12 4 21 4 76 125 140 324 552 1461-18 1461-18FC 1461-18DS1 General Notes: 1. Locate closer & track from C L of pivot or swing clear hinge pin when used. 2. If butt, frame and wall conditions permit. Pull side mountings allow 180° of opening. 3. Optional hold-open available. Adjustable from 85° - 100°. 4 Reinforcing per ANSI/SDI-100 recommended for hollow metal doors and frames. 5. Closer size is 12 34 x 2 34 x 2 38 6. Delay action optional. 3 5 3 1 28 28 24 21 22 51 60 67 70 Push Side Parellel Arm Mounted On: 1461-18PA Drop Plate 1461FC-18PA Drop Plate 1461-PADS1 Drop Plate 1460T/1461T Push Side (Door Mount) Drop Plates 7 8 1 14 5 38 4 5 38 9 34 1 2 1 78 5 12 2 38 9 16 FROM STOP 2 38 Left Hand Door Shown Right Hand Door Opposite 1 2 13 9 16 14 4 5 3 8 7 3 3 1 14 1 8 2 8 2 4 7 8 22 32 5 1 2 44 60 9 12 3 4 70 3 4 102 137 140 248 324 1461-18PA 1461FC-18PA 1461-PADS1 General notes: 1. Locate closer & track from CL of pivot or swing clear hinge pin when used. 2. If butt, frame and wall conditions permit. Pull side mountings allow 180° of opening. 3. Optional hold-open available. Adjustable from 85° - 100°. 4 Reinforcing per ANSI/SDI-100 recommended for hollow metal doors and frames. 5. Closer size is 12 34 x 2 34 x 2 38 6. Delay action optional. © Allegion 2014 Printed in U.S.A. 28460 Rev. 01/14-c 25.500 4.25 Front Front 11.000 11.000 BEGINNING SHEET folded SHEET Additional Notes: 1. None Revision History C D E F G H Revision Description: A > Revised Artwork 042801 Material White Paper Notes 1. printed two sides 2. printed black 3. tolerance ± .13 4. printed in country may vary 5. drawings not to scale Edited By Approved By EC Number Release Date D. Myers M. Sasso 042801 01-01-14 Title 1461 Drop Plate Installation Instructions Creation Date 09-21-11 Created By N/A Software: InDesign CS6 Number Revision 28460 Activity 3899 Hancock Expwy Security, CO 80911 c © Allegion 2014
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes XMP Toolkit : Adobe XMP Core 5.3-c011 66.145661, 2012/02/06-14:56:27 Create Date : 2013:12:04 09:11:57-07:00 Metadata Date : 2013:12:04 09:11:59-07:00 Modify Date : 2013:12:04 09:11:59-07:00 Creator Tool : Adobe InDesign CS6 (Windows) Instance ID : uuid:a6b10d4d-8eba-4e1d-bc46-49c9d1634f87 Original Document ID : xmp.did:516915126ECCE1118A0D8AD340C27D6B Document ID : xmp.id:8744CDC3FE5CE311B4B88E8E7DE561F5 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:8644CDC3FE5CE311B4B88E8E7DE561F5 Derived From Document ID : xmp.did:47A44EA0A139E21197309D1C525C39AC Derived From Original Document ID: xmp.did:516915126ECCE1118A0D8AD340C27D6B Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CS6 (Windows) History Changed : / History When : 2013:12:04 09:11:57-07:00 Format : application/pdf Producer : Adobe PDF Library 10.0.1 Trapped : False Page Count : 7 Creator : Adobe InDesign CS6 (Windows)EXIF Metadata provided by EXIF.tools