LCN 2610 Series Product Guide Automatic Operators LCN2610productguide

User Manual: LCN LCN 2610 Series Product Guide - Automatic Operators Product Guide

Open the PDF directly: View PDF PDF.
Page Count: 4

LCN CLOSERS
121 W.RAILROAD AVE.
P.O. BOX 100
PRINCETON, IL, USA 61356-0100
PHONE 800-526-2400
FAX 800-248-1460
www.lcn.ingersollrand.com
8/07
11
FEATURES
LCN 2610 SERIES
TOP JAMB (PULL SIDE)
TOP JAMB (PUSH SIDE)
MOUNTING
PARALLEL ARM
POWDER COAT
PLATED
PLASTIC
METAL
NON-HANDED
NON-SIZED
ACCESSIBILITY*
COVER CYLINDERFINISH
POWER OPERATOR
CONCEALED
HOLD-OPEN
STANDARD (SINGLE)
REGULAR (DOUBLE)
EXTRA DUTY ARM
*ARM FUNCTION
CUSH-N-STOP
SPRING CUSH
Meets ADA requirements (power mode).
* See individual series for maximum manual opening.
The 2610 AUTO EQUALIZER
is LCN’s pneumatically powered
MULTI-DOOR solution. This low-
energy power operator provides
easy access for people with
disabilities, the elderly, or the
frail. Designed primarily for
manual opening applications that
occasionally require automatic
opening.
Multi-Door Solution
Utilizes a 10,000,000 Cycle Heavy
Duty Door Closer
Quiet, Efficient & Reliable
Requires Control Boxes with
integral compressor or control
box using auxiliary air supply.
No Guard Rails/Safety Mats
Required
The 2610 Series is UL228 and meets
the provisions of ANSI Standard
A117.1, A156.19 and the Americans
with Disabilities Act.
Ideal for multi-door applications since cost per door leaf decrease
significantly as the number of door leaves increases.
Standard 2610 series closer shipped with single lever (standard) arm,
mounting/finish plate, standard track and wood and machine screw
pack. See 2610 Series page 13 for options.
Meets ADA requirements (power mode).
Sized cylinders for interior doors to 4’0” and exterior doors to 3’0”.
Handed for right or left swinging doors.
Requires additional system components. See CONTROL BOX
pages 28-30 and ACTUATORS & ACCESSORIES, pages 199-215.
Standard or optional custom powder coated finish.
Optional plated finish on arm, fasteners, and mounting/finish plate.
CONCEALED (IN FRAME) MOUNTING
LCN CLOSERS
121 W.RAILROAD AVE.
P.O. BOX 100
PRINCETON, IL, USA 61356-0100
PHONE 800-526-2400
FAX 800-248-1460
www.lcn.ingersollrand.com
8/07
12
Butt Hinges should not exceed 5” (127 mm) in width.
Auxiliary Stop is recommended.
Head Frame minimum 4” (102 mm) x 4” for hollow metal or aluminum
tube construction.
Top Rail 13/8” (35 mm) mortise required.
5/16” (8 mm) cutout required at top of the door, push side only.
System Diagram See “AUTOMATIC OPERATORS” section pages 8-9 for
typical system wiring, and page 30 for electrical and pneumatic data for
control boxes.
CONCEALED MOUNTING
For interior or exterior doors.
Single acting cylinder in head frame.
Concealed arm and track in door
top rail.
MAXIMUM OPENING
Butt hinge template allows 90° power
opening and 160° manual opening.
Consult factory for all pivot
mounted installations.
LCN 2610 SERIES
MOUNTING DETAILS
Special Templates
Customized installation templates
or products may be available to
solve unusual applications.
Contact LCN for assistance.
LCN CLOSERS
121 W.RAILROAD AVE.
P.O. BOX 100
PRINCETON, IL, USA 61356-0100
PHONE 800-526-2400
FAX 800-248-1460
www.lcn.ingersollrand.com
8/07
13
LCN 2610 SERIES
ACCESSORIES
3038
CYLINDERS
CYLINDER ONLY, 2610-3971
Standard, handed, cast iron cylinder.
NOTE: For various applications see “Table of Sizes” page 14.
CYLINDER ASSEMBLY, 2610-3071
Standard, handed, cast iron cylinder and mounting plate.
NOTE: For various applications see “Table of Sizes” page 14.
ARMS
STANDARD ARM, 2610-3077T
Handed arm.
Track roller not included with arm.
TRACK
STANDARD TRACK, 2610-3038
Standard non-handed track.
Will not accept hold open clip or bumper assembly.
INSTALLATION ACCESSORIES
TRACK ROLLER, 2610-3034
Quiet, low friction roller assembly.
Shoulder dimension “X” = 1/16” (1 mm).
3077T
3034
3071
3971
LCN CLOSERS
121 W.RAILROAD AVE.
P.O. BOX 100
PRINCETON, IL, USA 61356-0100
PHONE 800-526-2400
FAX 800-248-1460
www.lcn.ingersollrand.com
8/07
14
LCN 2610 SERIES
ORDERING INFORMATION
TABLE OF SIZES Select closer based on width of door.
Sized 2610 series cylinders available in size 3 or 4.
Closing power of all 2610 Series closers may be increased 15%.
Indicates recommended range of door width for closer size.
NOTE: Minimum door width 30" (762 mm).
HOW-TO-ORDER
2610 SERIES CLOSERS
1. SELECT CYLINDER SIZE.
2613
2614
2. SPECIFY HAND.
RH
LH
3. SPECIFY FINISH.
Standard Powder Coat ____________
Aluminum, Dark Bronze, Tan, Statuary,
Light Bronze, Black, Brass.
Closer will be shipped with:
- STANDARD ARM,
- TRACK ROLLER,
- STANDARD TRACK,
- WOOD and MACHINE SCREW PACK,
unless options listed below are selected.
CLOSER OPTIONS
FINISH
Custom Powder Coat (RAL) _________
Plated Finish, US ________________
SCREW PACK
TB*, Wood & Machine Screw (TBWMS)
TORX Machine Screw (TORX)
TB* & TORX Machine Screw (TBTRX)
*Specify door thickness if other than 1 3/4”.
SPECIAL TEMPLATE
ST-_________
size 4
2614
EXTERIOR (and VESTIBULE) DOOR WIDTH
30"
762mm
36"
914mm
INTERIOR DOOR WIDTH
30"
762mm
38"
965mm
48"
1219mm
size 2 size 3 size 4
2613
2614
Minimum
Door
Width
Minimum
Door
Width

Navigation menu