Leedarson Lighting RC4X1WN-A3 Remote User Manual 4 02

LEEDARSON LIGHTING CO., LTD. Remote 4 02

USERS MANUAL

1.Group SelectionPress the group button you want to control.e.g. For Light 1--- Press group button 1--- Group indicator on--- Now you can playIf you want to control all bulbs please press (1-4) button.e.g. Press (1-4) button---All group indicator on----Now you can playRemote Control User GuideRemote Control User GuideRemote Control User Guide Commission DevicesOn/Off & Dim Control ButtonsStatus IndicatorRemote OverviewStatus Indicator:ON/Off/Dim Control ButtonsGroup Selection IndicatorsGroup Selection ButtonsProgram ButtonOn/OffGroup 1Group 3Dim upQuick toggling between highestand lowest dimming levelDim downGroup Selection IndicatorsGroup Selection ButtonsRemote is in Standby mode or Selected Group is OFFLED’s indicate selected group.LED’s will be OFF in standby mode.Group 2Group 4All Groups(slow)(fast)Selected Group is ONFinding Network Channel(when batteries are inserted)Commisioning a bulb6.ResetReset: Set remote to factory default and delete all stored data.Key combination: PRG->ON/OFF->DOWN->ON/OFFAfter pressing all the keys in sequence above, indicator LED will flash for 5 sec and then the remote is reset done.Group 1Group 3Group 2Group 4All Groups4.Releasing (Un-Pairing) LightsReleasing (Un-Pairing) Lights: To release the lights that already in the certain group.Caution: All lights in this certain group will be released. To release a single light, keep other lights in the same group powered off by wall switch.Press and hold PRG-> The certainGroup ID button ->release PRGAll lights in this groupare set to factory defaultUser connects bulbto new networkOr after 5 minLight is added to device list as newNetwork close Brightness is at 5%.Press & hold Press once ReleaseLight finishes On Restarted by wall switchBlinks twice2.ON/OFFON/OFF: Every single press turns ON or OFF all the Lights in selected group(s).3.DimmingDimming: Dimming the lights that already commissioned to the remote.UP/DOWN: Every single press the light up/down in selectedgroup(s) by one level until max/min. Level is reached.Remark: There are totally 16 brightness dimming levels.Dimming(Shortcut): Every single press toggles the light in selected group(s) between max and min, Dimming level.Dim upQuick toggling between highestand lowest dimming levelDim down5.Commissioning (Pairing) LightsCommissioning (Pairing) Lights: Follow instruction below to commission new smart lights. In case you buy new smart lightsor the current smart lights are set to Factory Default. Light (Factory Default) must start OnWith your RemoteRestarted by wall switchSuccessfully paired to RemoteLight blinks twice,Once commissioned to aremote, it’s no longer visible to other remotesIn case of a time-out,the bulb will turn off the radio and become a standard non-controllable lightFailPress and hold one of the groupbutton for 3s that you want thelight to join. 105*280mm(4折 折后尺寸105*70mm)back
FCC WARNING This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Navigation menu