LEGENDSKY TECH INTEGRAL-V01 Integral User Manual Integral usermanual
LEGENDSKY TECH CO., LIMITED Integral Integral usermanual
user manual
Integral
UserManualIntegralFWRev1.0
Disclaimer: 3rd party and/or custom firmware providing extra features are not covered in this
manual.
2 4K Integral – User Manual
TableofContents
Overview …...................................................................................................
... 3
Connecting
Cables …........................................................................................ 4
Power
Status/LED ….........................................................................................
5
Reset HPD/Factory
Default…...........................................................................6
EDID Mode
Selection ......................................................................................7
CEC Trigger
Button ……….................................................................................. 8
Input Switching and Matrix
Mode................................................................... 9
HDCP
Settings………………………..…………………………………………………
…………………. 10
Audio
Settings…...............................................................................................
11
Integral USB GUI for Windows
PC..............................................................…… 12
Integral Total Control
APP............................................................................... 14
Frequently Asked Questions
(FAQ) ............................................................... 16
Specifications...............................................................................................
.... 19
Disclaimer: 3rd party and/or custom firmware providing extra features are not covered in this
manual.
3 4K Integral – User Manual
Overview
The HDfury team would like to thank you personally for purchasing the Integral!
This unique HDMI2.0a and HDCP2.2 device with support of 4K60 4:4:4 600MHz 18Gbps
bandwidth will allow you to solve any HDCP error, Split any SD/HD/Full HD/4K or PC signals up
to 600MHz, replace or extract HDMI audio, Input any CEC commands, Update and switch
between multiple edid banks and more. Operations can be completed through slide switch and
push buttons on the unit, via wired USB connection or through wireless Bluetooth connection
with any Smartphone or Tablet running Android. (IOS support underway)
Disclaimer: 3rd party and/or custom firmware providing extra features are not covered in this
manual.
4 4K Integral – User Manual
Disclaimer: 3rd party and/or custom firmware providing extra features are not covered in this
manual.
5 4K Integral – User Manual
ConnectingCables
To use your Integral:
• Connect a HDMI input cable to the HDMI input.
• Connect a HDMI output cable to the HDMI output.
• Connect the Integral power supply.
• Connect any additional HDMI input/output cable or any audio input /output cable (optional).
Disclaimer: 3rd party and/or custom firmware providing extra features are not covered in this
manual.
6 4K Integral – User Manual
As shipped, the Integral defaults to HDCP1.4 on the Bottom output port. Top Output port can be
configured to any HDCP revision. Make sure that you are using 600MHz certified HDMI 4K
cable if you plan to set up a 4K60 4:4:4 600MHz 18Gbps link in your setup.
Power/StatusLED
The Integral logo will glow Green when in use. When the Integral first receives an HDMI signal
the logo will quickly turn on, then off, and then on permanently to indicate that the 4-letters
handshake has been completed.
The status of the green logo may be used for troubleshooting:
Logo OFF: Insufficient power. Use the Integral power supply.
Logo BLINKING (on for split second, off for 5 seconds): The Integral is receiving
power and is ready to accept an HDMI signal.
Disclaimer: 3rd party and/or custom firmware providing extra features are not covered in this
manual.
7 4K Integral – User Manual
Logo ON: The Integral is powered and receiving and decoding the HDMI signal.
ResetHPD(ShortPress)orResettofactorydefault(LongPress)
The Integral offers 2 functions per push button.
Short Press on Reset Button will generate Hot Plug Detection event.
Long Press (over 10s for security) will reset the integral to factory default.
Disclaimer: 3rd party and/or custom firmware providing extra features are not covered in this
manual.
8 4K Integral – User Manual
EDIDModeSelection
EDID slide switch have 3 positions.
Switch should be set to middle position to allow control via USB, IR or Bluetooth device.
EDID Automix Mode: Create EDID based on mutual least capabilities so both displays will
always show a picture and audio. Use this mode for 4K60 4:4:4 TVs.
Custom Use [BT]: this can be updated via BT or via USB. By default, it’s a 4K60 4:2:0 with Full
Audio capabilities.
Fixed EDID with L/R Audio: This mode is a 1080p60 2channel stereo basic table.
Disclaimer: 3rd party and/or custom firmware providing extra features are not covered in this
manual.
9 4K Integral – User Manual
CECTriggerButton
CEC Trigger Button allows you to send two custom CEC commands on the HDMI/CEC network.
Integral TOP output port is the CEC master output.
Short Press on CEC Trigger Button will send CEC1 command.
Long Press (over 2sec) on CEC Trigger Button will send CEC2 command.
By default CEC1 is 0F:04 (Display View On, it will turn ON HDMI/CEC capable unit)
By default CEC2 is 0F:36 (Standy, it will turn OFF HDMI/CEC capable device)
Note: To send LIVE CEC commands or to update the default CEC commands please refer to
the USB GUI for Windows software at page ?? or the smartphone/tablet APP for Android (iOS
support underway) at page ??.
Disclaimer: 3rd party and/or custom firmware providing extra features are not covered in this
manual.
10 4K Integral – User Manual
InputSwitchingandMatrixmode
Input Switch / Matrix Mode Button allow you to switch active inputs or enter Matrix mode.
Short Press will switch the active input channels.
Long Press (over 2sec) will enter the Matrix Mode (only available up to 4K30/300MHz).
Blue LEDs on the unit are showing active input channel (when one LED is ON) or Matrix Mode
(when both LEDs are ON).
Note: You can switch channel from USB GUI for Windows software, see page ?? or via
smartphone/tablet APP for Android (iOS support underway) at page ??.
Disclaimer: 3rd party and/or custom firmware providing extra features are not covered in this
manual.
11 4K Integral – User Manual
HDCPSettings
HDCP slide switch have 3 positions.
Switch should be set to middle position to allow control via USB, IR or Bluetooth device.
HDCP 2.2 Mode: In this mode you always have HDCP 2.2 on TOP output port and HDCP 1.4
on bottom output port.
HDCP Auto [BT]: In this mode the Integral unit undertakes dynamically all HDCP conversion to
always output a working signal. The bottom output is always HDCP 1.4, the top output is
dynamic.
HDCP 1.4: In this mode, you always have a HDCP1.4 signal on both output ports.
Disclaimer: 3rd party and/or custom firmware providing extra features are not covered in this
manual.
12 4K Integral – User Manual
AudioSettings
Audio slide switch have 3 positions.
Switch should be set to middle position to allow control via USB, IR or Bluetooth device.
Audio Replaced from Jack: HDMI output sound replaced by 44.1kHz (or 48kHz) audio from
Jack input. In splitter mode both HDMI outputs will offer the new replaced audio from Jack. The
S/PDIF and L/R outputs continue to output the original HDMI audio normally
Audio Auto [BT]: This slide switch position allows change via BT or via USB. By default, it’s set
to HDMI.
Audio from HDMI: HDMI audio pass-through mode.
Disclaimer: 3rd party and/or custom firmware providing extra features are not covered in this
manual.
13 4K Integral – User Manual
IntegralUSBGUI(PCWindowsSoftware)
Disclaimer: 3rd party and/or custom firmware providing extra features are not covered in this
manual.
14 4K Integral – User Manual
The USB GUI for Windows PC allows you the following control:
- Display Firmware revision
- Display Active input and output link information (such as resolution, bandwidth, etc..)
- Allow to switch active input
- Turn on/off autoswitch feature.
- Select Audio source.
- Select HDCP rules
- Enable/Disable 4:4:4 > 4:2:0 conversion
- Select EDID table, Read, Write, Load, Save, Checksum.
- Send Live HDMI CEC command.
- Save CEC1 SP/ CEC2 LP commands.
- Send Live HDR and InfoFrame Metadata.
Grab it from the Download Tab on the Integral product page: here.
Please note that the 4K60 4:4:4 > 4:2:0 conversion only affect TOP output. Bottom output will
still offer a 4K60 4:4:4 direct path.
When activated, the autoswitch feature will let the Integral unit autoswitch to active signal when
current signal is lost.
Disclaimer: 3rd party and/or custom firmware providing extra features are not covered in this
manual.
15 4K Integral – User Manual
IntegralTotalControlAPPforAndroid
Disclaimer: 3rd party and/or custom firmware providing extra features are not covered in this
manual.
16 4K Integral – User Manual
Main Features of the Android Total Control APP for Integral
This APP request Bluetooth authorization and SD card/file writing permission.
It will allow you to control and operate your HDfury Integral and your Home Theater setup.
It can perform the following:
- Reset/HPD.
- Read/Modify and Upload Configuration.
- Switch Input channel.
- Set Auto switching mode.
- Enter/Exit Matrix mode.
- Define HDCP rules and fix HDCP error.
- Sound input/output selection.
- Mute/Unmute all sound output from Integral
- EDID table selection.
- Convert 4K60 4:4:4 > 4K60 4:2:0
- Send live CEC command to the HDMI/CEC network.
- Setup CEC rules and access CEC customs commands.
- Define CEC press button (Short and Long press)
- Display current link speed and infoframe information.
- Display active link(s).
Grab it from Google Play Market: here.
Disclaimer: 3rd party and/or custom firmware providing extra features are not covered in this
manual.
17 4K Integral – User Manual
You can create your own menu and add custom commands at any time through an editable
XML menu file. You can pair, connect and use the Bluetooth APP even when no signals is going
through the Integral, in such conditions, the Bluetooth range is over >20m. However, the
Bluetooth range will be highly affected by the resolution in use because of EMI, below you can
find the average working distance for Bluetooth based on the processed signal resolution and
refresh rate.
1080p60 and below: Bluetooth working range is about 10 meters.
4K60 4:2:0 and below: Bluetooth working range is about 5 meters.
4K60 4:4:4: Bluetooth working range is about 2 meters. (We recommend using IR for wireless
control in 600MHz)
Known issues:
- Sony Z serie devices have issue with BT range, there is not much we can do about it as it is a
global issue affecting mostly all Sony Z serie devices as you can read/find on google. The
Google Play market offers APK that claims to solve the Bluetooth issue on Sony but we did not
see any noticeable improvement using them. Current working range for Sony Z serie devices is
about 5 or 6 meters.
FAQ
Can we pass-through 4K60 4:4:4 and have one output at 4K60 4:2:0 ?
Yes, when activated, the 4K60 4:4:4 > 4K60 4:2:0 conversion will only affect the TOP output,
BOTTOM output will stay a direct path at 4K60 4:4:4.
What is the Bluetooth working range ?
You can pair, connect and use the Bluetooth APP even when no signals is going through the
Integral, in such conditions, the Bluetooth range is over >20m. However, the Bluetooth range
will be highly affected by the resolution in use because of EMI, below you can find the average
working distance for Bluetooth based on the processed signal resolution and refresh rate.
1080p60 and below: Bluetooth working range is about 10 meters.
4K60 4:2:0 and below: Bluetooth working range is about 5 meters.
4K60 4:4:4: Bluetooth working range is about 2 meters. (We recommend using IR for wireless
control in 600MHz)
My display is supposed to accept 4K60 4:4:4 signal but it does not work ?
For most UHD TV set we tried, there are always extra configuration options to active in order to
achieve a 4K60 4:4:4 600MHz link. For ex, on samsung: in order to enable the 444 colorspace
for 4k in Samsung TV:s you must go to "settings" and "hdmi" and "UHD color" and enable it.
Then also you must assign the HDMI port1 as "PC" in the tools menu. Only after these two
steps will 600MHz be accepted. Similar activation trick is require on most UHD TV. Additionally,
most UHD TV only have certain specific ports that are 600MHz capable.
Disclaimer: 3rd party and/or custom firmware providing extra features are not covered in this
manual.
18 4K Integral – User Manual
I have a PC mode on my TV (or a PC monitor) what resolutions are supported for
graphics mode ?
All PC graphics mode within the 600Mhz bandwidth are supported, including ultra high
resolution such as WQSXGA, QUXGA, QFHD, WQUXGA, 4K.
What output resolution does the Integral support in HDTV mode ?
All known SD, HD, Full HD and UHD formats are supported including: 480p50, 480p60, 576p50,
576p60, 720p50, 720p60, 720p100, 720p120, 1080i25, 1080i30, 1080p24, 1080p25, 1080p30,
1080p48, 1080p50, 1080p60, 1080p72, 1080p75, 1080p96, 1440p50, 1440p60, 2160p24,
2160p25, 2160p30, 2160p50, 2160p60 (these are examples only, anything within the 600MHz
bandwidth is supported.)
What version of HDMI does the Integral work with? Do I need HDMI 1.3/1.4a/2.0a? Does it
matter?
It does not matter. HDfury Integral works with any version of HDMI from 1.0 and up.
Do I need to set anything special in my HDMI source device to set resolution correctly?
No. The HDfury Integral will be detected as 2160p60 4:4:4 capable device by your source and
always accept and process the highest quality stream from your source devices. There is no
need to set the HDMI source to any specific resolution.
Is there any latency (delay) introduced to the signal?
Virtually none. The latency added is in the order of a few pixel clocks only. Nothing noticeable at
all.
What is the USB port for?
To supply power from the supplied USB power unit and for firmware upgrades when new
(additional) functions and enhancements are offered.
What about long HDMI cable runs? Can I expect issues?
For 600MHz user must use "high speed" cables, or 600MHz/18Gbps certified. For 4K30, 1080p
or less almost all cables are ok. HDfury Integral acts as an HDMI repeater device. So having a
HDfury Integral in the path will amplify and recover the signal. You should not need any passive
(or active) HDMI amplifiers, especially if you put HDfury Integral in the middle of your cable run.
If you previously had to use an amplifier, the HDfury Integral can most likely take its place. The
HDfury Integral has been used with 50 foot (and longer) HDMI cables without issues.
How are the new lossless audio formats via HDMI input handled ? E.g. DTS-HD/MA and
DD/E-AC3 : Are they stripped down to DTS core or Dolby Digital respectively to fit the
requirements of the S/PDIF standard ?
Lossless audio is transmit through HDMI output only. HDfury Integral does not compress or
otherwise create loss to the incoming audio. Only stereo and 5.1 sound can be output via
SPDIF output and analog output.
Disclaimer: 3rd party and/or custom firmware providing extra features are not covered in this
manual.
19 4K Integral – User Manual
How do I hook up the audio from the Integral ?
The Integral has both analog and digital (TOSLINK) audio output in one connector labeled "D/A"
along with a headphone symbol. It's a 2-in-1 connector meaning that you can plug in either a
3.5mm stereo analog jack or a digital mini-TOLINK (3.5mm mini-jack) cable and get stereo
analog sound or 5.1 Dolby/DTS digital sound out of the Integral. See further below for pictures
of both types of connectors/cables.
Integral 3.5mm mini-TOSLINK digital audio cable:
If you'd like to use a "regular" TOSLINK cable, use a 3.5mm Mini-TOSLINK to regular TOSLINK
adapter:
A 3.5mm stereo audio cable can be used for connecting the Integral to a TV if you do not have a
home theater setup (you only have 2 speakers in your TV):
Do I need to use the HDfury4 power supply?
Disclaimer: 3rd party and/or custom firmware providing extra features are not covered in this
manual.
20 4K Integral – User Manual
Yes. Due to the advanced features, the HDfury4S draws more power than previous HDfury
models. The HDfury4 power supply must be used at all times.
Is the Integral power supply the same as that used by the HDfury1, HDfury2, and
GammaX?
No. The power supply for the HDfury1, HDfury2 and GammaX kits are 0.5A max current. The
HDfury3 is 1A max current. The Integral power supply can supply up to 2.0A. Do not use an
HDfury1, HDfury2, or GammaX power supplies with the Integral.
What sort of power supply does the Integral use?
Integral power supply adheres to these requirements:
- Provides REGULATED (+/- 5%) 5VDC power with 2.0A min DC current
- Delivers the power through a mini usb connector.
Trying to use an AC/DC adaptor that doesn't adhere to these three requirements may destroy
the Integral. Do not use the power supply from the HDfury1, HDfury2, or GammaX with the
Integral.
Disclaimer: 3rd party and/or custom firmware providing extra features are not covered in this
manual.
21 4K Integral – User Manual
HighlightFeatures:
HDR and Infoframe Metadata Live Injector
Integral is capable of injecting live Infoframe and HDR metadata at any resolution and in real
time.
Proof of concept is already available from the USB GUI PC windows software available.
Further software solution for a complete live and real time handling of infoframe and HDR
metadata will be offered and announced shortly through an exclusive partnership underway.
Unique HDCP Doctor
Providing a total of 6 HDCP 1.4 and 2.2 engines for decryption/encryption, HDfury Integral
offers a total HDCP workaround solution including HDCP 1.4 > HDCP 2.2 and HDCP 1.4 >
HDCP 2.2 both ways conversion within the same unit.
It is capable of connecting any HDCP1.x or HDCP2.x source devices to any HDCP1.x or HDCP
2.x sink devices.
Each RX block decrypts the input first whether its 1.x or 2.x. Then each output port can
individually encrypts it to 1.4(both) or 2.2(only top port) or not encrypt it at all.
Dual conversion can be operated on both channels simultaneously.
Display HDCP 2.2 Content with Non-Compliant Devices
HDCP 2.2 is the new copy-protection scheme for 4K UHD content.Not only it is not backward
compatible but many recent 4K devices don’t even support it.
Source devices, including media servers and head-ends like Netflix, will encode their 4K content
with this new scheme. TVs must be HDCP 2.2-enabled to play it, and everything in the video
chain including switches and receivers must be compliant as well, or the display will go dark
and/or display a HDCP error.
Bad news for consumers who have purchased expensive, high-bandwidth, processor-rich
switchers and receivers to accommodate 4K. While the newer products may support the
bandwidth needs of 4K, they won’t play copy-protected works until Integral is an active part of
the setup.
2×2 Splitter up to 4K60 4:4:4 600MHz 18Gbps
Splitting any signal up to 4K60 4:4:4 600MHz signal is now a reality, thanx to IR/BT or push
button, you can easily switch between 2 inputs that will be replicated to 2 outputs. HDCP
conversion can be configured and applied on the fly in order to always output the type of signal
that your display or sink device is expecting.
4K60 4:4:4 600MHz 18Gbps > 4K60 4:2:0 300 MHz 10.2Gbps conversion
Disclaimer: 3rd party and/or custom firmware providing extra features are not covered in this
manual.
22 4K Integral – User Manual
Mostly all UHD TV sold until recently can only accept 4K60 when it comes in the form of a 4K60
4:2:0 300MHz signal, However upcoming sources and current high end graphics cards are
outputting 4K60 4:4:4 (600MHz – 18 Gbps). Integral is solving that arising issue.
HDMI Audio Extracting
HDfury Integral can extract HDMI audio and has a simultaneous output of analog L/R stereo
and optical S/PDIF via 3.5mm combo jack connector.
External Audio Replacing
Mini jack input connector (or Mic/Line IN) option is available to replace the audio in any
HDMI/DVI-D stream up to 4K60 4:4:4 600MHz 18Gbps.
Audio replacing only work on one channel, the secondary channel is a direct path from HDMI to
HDMI.
Useful in presentation areas or for simply streaming your phone/tablet music to your HDMI amp.
EDID Management
Improved EDID Management solution with either a Custom uploaded EDID, Self generated
Automix EDID or a Fixed basic EDID.
AutoMix EDID feature will create a custom EDID by mixing both sink EDID connected to the
splitter output ports.
Custom and manual EDID utility available from the download section.
HDMI/CEC TOTAL COMMANDER
HDfury Integral offers an unique CEC commands manager, with CEC compatible equipment.
CEC commands allow a HDMI source to send instructions and operate check on connected
HDMI devices.
Using the Integral’s Android/Apple APP for smartphone/tablet, user can configure custom CEC
commands and send them LIVE or based on trigger event.
As a practical use case example: it is capable of turning your display OFF when the source
device is turned OFF.
Concretely, it could turn off your HDTV when you power off your PS4.
TOTAL CONTROL
HDfury Integral APP is available for mobile and tablet running Android or iOS.
You can control HDfury Integral using your mobile phone or tablet via a bluetooth connection.
IR control and various physical buttons for configurations are also available.
2×2 Matrix up to 4K30 4:4:4 300MHz
Matrix solution is available for HDMI stream up to 4K30 4:4:4 300MHz 10.2Gbps.
Disclaimer: 3rd party and/or custom firmware providing extra features are not covered in this
manual.
23 4K Integral – User Manual
MainSpecifications
2x Input / 2x Output Splitter (HDMI2.0a/HDMI1.4/DVI1.0 compatible)
■ 4K60 4:4:4 600MHz 18Gbps Pass through
■ 4K60 4:4:4 600MHz 18Gbps > 4K60 4:2:0 300MHz 10.2Gbps conversion
HDCP Doctor (HDCP Workaround solution to any HDCP error)
■ HDCP 2.2 > HDCP 1.4 conversion
■ HDCP 1.4 > HDCP 2.2 conversion
■ HDCP x.x > HDCP x.x conversion
Dual HDMI2.0a & HDMI 1.4 combined
Dual HDCP 1.4 & HDCP 2.2 combined
CEC Support: For inter-device control between both inputs and the primary output (TOP) HDMI channel.
CEC command: USB configuration for automation, trigger via events, push button or via IR/Bluetooth
External Audio Replacing : input external sound or switch sound between input
Audio Extracting: Audio De-Embedder of Optical & Analog L/R
EDID management via USB or BT*
■ Improved EDID Management solution with either a Custom uploaded EDID, Self generated Automix EDID or a
Fixed basic EDID.
■ AutoMix EDID feature will create a custom EDID by mixing both sink EDID connected to the splitter output ports.
■ Custom and manual EDID utility available from the download section.
HDR & InfoFrame Live Injector.
HDMI Booster/Extender: Capable of extending 1080p resolution up to 15m. in and 15m. out (30m. total for 1080p),
UHD resolution up to 10m.
HDMI Doctor: Solves most HDMI integration issues such as HDCP, EDID, HPD, and audio breakout.
HDMI Equalevel: Precise signal equalization towards both input and output signals perfectly delivers the best
possible picture quality.
Hot-Plug control: Force the input device to always see an active connection.
Licensing: Fully licensed and compatible with all HDMI and HDCP technologies.
Deep Color Support
Flexible/Portable/Plug’n Play
3D Ready: Capability to pass 3D stereoscopic signal formats.
Just like any recent HDfury hardware, it comes with USB upgradable firmware that allow you to unleash furious
features.
Disclaimer: 3rd party and/or custom firmware providing extra features are not covered in this
manual.
24 4K Integral – User Manual
SupportedAudio/VideoSignals
Supported Format: SD/HD/FullHD/UHD/4K30/4K60, basically INPUT/OUTPUT any video format up to 4K60 4:4:4
600Mhz 18Gbps
Supported resolution examples:
480p/720p/1080i/1080p24/1080p25/1080p30/1080p50/1080p60/1440p50/1440p60/2160p24/2160p25/2160p30/2160
p50/2160p60
Support all VESA mode video format (PC Resolutions) up to ultra high resolution such as WQSXGA, QUXGA,
QFHD, WQUXGA, 4K
Support any Audio format such as PCM at up to 192kHz, compressed audio (IEC61937), DSD, DST,DTS,DTS-HD,
Dolby True HD, DTS-MA and HBR.
TechnicalSpecifications
Optical S/PDIF output
Analog stereo mini jack output.
Audio: PCM at up to 192kHz, compressed audio (IEC61937), DSD, DST,DTS,DTS-HD, Dolby True HD, DTS-MA
and HBR.
Mic In (Line In) sampling at 44.1/48kHz
DDC Signal: 5V p-p (TTL)
Power Supply: External 5 Volt 2 Amp USB (same as most smartphone/tablet PSU)
Power Consumption: <2Watts
Product Dimensions: 3.6” x 2.5” x 1”, Weight: 4 oz
Shipping Dimensions: 6.3” x 4.2” x 3.3”, Weight: 16 oz
Enclosure: Black PVC/Gold metal with Green/Blue Led
Regulation: CE, FCC, RoHS, WEEE
Disclaimer: 3rd party and/or custom firmware providing extra features are not covered in this
manual.
25 4K Integral – User Manual
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
Team HDfury thanks you for your support
For help visit: http://www.HDfury.com
Disclaimer: 3rd party and/or custom firmware providing extra features are not covered in this
manual.
26 4K Integral – User Manual