LESHI Video Technology C390S Battery video alarm camera with 2.4G WiFi User Manual

Download:
Mirror Download [FCC.gov]
Document ID	4195177
Application ID	SYHPwcbj8AUNKDAiItLytw==
Document Description	user manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	76.9kB (961210 bits)
Date Submitted	2019-03-08 00:00:00
Date Available	2019-03-08 00:00:00
Creation Date	0000-00-00 00:00:00
Document Lastmod	0000-00-00 00:00:00
Document Title	user manual

Freecom®
C390/C390S Battery
video alarm camera
User Manual V1.0
Shenzhen Leshi Video Technology Co., Ltd,
www.freecamglobal.com
n Accessories
@ _ AnttheftIne x1
® Manual x3
B) casos
Type— charging cable xt
® _ Ant—theftine xt
® Manual x3
Oremmrmeem
aneman
0 0 @ ®
® . Type—e charging cable xt
@ . Magnetic bracket xt
@  Screwsetx1
o+3 91
@ | Magnetic bracket xt
@ _ Screw setxt
® _ Extension cable x1 (1 moters)
Bracket for solar panel xt
Camera Indicator Light Status
Indicator ightstatus |_beseription Solution
Indicator biue Walting for
lightis biinking configuration
It it blnks over 2 minutes and stll cant
Indicator red Gannecting tothe | connect success, please reset device
Hightis binking wini and theck the routers WE agnal
Tndigator ignt Nommal operation
Eor o power oll
The C390/C390S is a smart siren and flash alarm camera that can
be battery powered for long—term operation.
« It only works when the PIR triggers the alarm or APP wakes up
remotely. It usually keeps online with the way of deep sleep and
low power consumption.
* The C390/C3008 Can auto "woken up" if it detects the motion
events within its field of alarm, Simultaneously push pictures
and notify users and automatically recording in the cloud.
*C390/390$ can wake up at once at anywhereanytime and get
remote live view on Mobile phone.
* Automatic sound and light alarm at night.
* Long—term work under normal sunshine conditions in most
parts of the world (only for €3908).
n Exterior diagram
Prior operation of the camera, please carefuly read and follow the installation
and operation instructions.
A) C390
Cauton vam
Light Ant—ineftIno . [ Sposker
mounting hole ~@ u>
Lens _. ® ?”
M Inicator l‘sf Magneti bracket
status light a
WiFi key
Power switch
Typec
PR Power port
8) casos
Pover supoly
catle
Power state indicator
Solar panel Status
— Power catle indicator light status
Blue Light on lemal charging
Power statendlcator Lightoff No charging
n Installation IMlustration
1) Check the strength of the WiFi zow x
signal at the location where you — | x
would like to position your camera lesx = | 2
by using your smartphone. Cms
B Technical parameters
Htems Specifications
Product model C390 casos
lens 2.6mm / 120 degrees
Video H264 encoding
Audo support two—way audio
wiei Support IEEBO2.1thigh protocoI(24GHe)
Infrared LED Support
PIR moton delecion Molion detect range = $—27 feat parons for se up
Storage Bullin TF card or Cloud storage
pap Support
Low—Battery power
indicator APP support
Solar panel 1 Maxllr;l:)r;nnAu%lg?Jle is
6800mAh,10—20 times 6800mh, Charged the sofar
tragered/day.The battery panel can keep the camera
Battery Standby long last over 180 days, . |. actvates 10—20 times per day
Ht tme operatng,
Dimension Gamera7463"112mm _ Solar panel:154"144"40mm
Net weight Camera:2609 _ Solar power kit480g
Waterproot evel iess
2) Switch on the camer
3) For the time the blue light is blinking, if not, please press the WiFi key for
3—5 seconds for reset, Add the camera to the app. (Please refer to the APP
instruction manua)
4) The indicator light operation process from—blue light blinks—red light
blinks—off The camera enters normal operation mode (sleeping mode}.
5) Install the solar panel (only for C3908).
6) Positioning your camera and install it
390 installation:
Tear off the sticker and paste it on a chosen location,drll the holes and drive
in expansion bolts.
Installation for the solar panel:
Prior installation of the camera, please charge it
over 6 hours to a DCSV/1A regular smartphone
power adaptor until the charging indicator light
goes off by using the enclosed USB cable.
Notice
3908 Installation
+ adustng
Mapee
Scow
1. Place the bracket aligned with the sticker, screw the bracket into the hole
which driled on the wall and screw the solar panel on the bracket afterwards.
2 Ideal location for installation.
2.1 Choose a location and direction where has as the most sufficient sunlight
as possible for the solar panel installation.
2.2 Mount the solar panel on a wall or roof and connect the power line to the
camera. The yellow indicatior on the panel and camera will be solid on when
catch the sunshine.
ECC ID:2AJPAC3908
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmfulinterference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
NOTE 1: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules, These
limits are designed. to provide reasonable protection against. harmful
interference in a residential installation, This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
~Reorient or relocate the receiving antenna.
~ Increase the separation between the equipment and receiver.
«Connect the equipment nto an outlet on a ciroult diferent from that to which
the receiver is connected.
«Consult the dealer or an experienced radioTV technician for help.
NOTE 2: Any changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the users authority to
operate the equipment.
This device must be installed to provide a separation distance of at least 20
em from all persons and must not be collocated or operating in conjunction
with any other antenna or transmitter.
Fig. 1
Th number of wake s tmes(Day Averige sunstine tme fou)
Black 0
mea 1
Be 2
Green
Note: The shaded area maans
charging the equipment
arifaly nccoring to
proctea stuaton.
Conthuous woring time
ofcamern (day)
If the camera detects false alerts frequently,you have
option to turn off the motion detection function by
selecting "Security" in APP and turn off the "Motion
Detection" function in "Protection" menu.
Notice
B o
1 Device adding failure?
Fallure device adding to the app
Solutions:
® Make sure your router working properly(only supports 2.4GHz WiFi),
and "Mac addressing limitation® option is "not enabled® .
@® Check the WiFi indicator light status, i it blinks red, reset the camera by
pressing on the WiFi key for 3—5 seconds, enter password of the router and
make sure there is sufficient WiFi signal. repeat device adding process.
2 Can I use the PC to read the camera TF card contents?
When the camera connecting WiFi, the recorded videos can be playbacked
on the app.The PC software can also derive the videos as AVI format in
LAN. Or use the card reader connects the TF card to the computer,playback
on the PC software,
3 Why the camera battery goes out so quickly?
® The camera is triggered frequently by frequent moving objects.—Turn
off the " Motion Detection" or adjust the camera direction out from the filed
with frequent moving objects for reduction of camera triggering.
@® Solar charging can only maintain normal camera operations. if solar
energy is not sufficient enough for camera consumption. under this
condition, you need to charge the camera with a power adaptor manually
when you are reminded of low power.
* Please follow the link: www—freecamglobal.com
for more FAQ(Frequently Asked Questions) solutions
Contact: Mr Dong(Jot Darter Inc)
ADD: 222 Yamato Road Suite 106—130
Boca Raton, FL 33431 US
Phone : 302:229—7880 . joeseasky@gmail.com
soom.oe—ts000r—18

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Page Count                      : 2

EXIF Metadata provided by EXIF.tools