LG ELECTRONICS GT8110C Digital Spread Spectrum Cordless Telephone User Manual manual

LG Electronics, Inc. Digital Spread Spectrum Cordless Telephone manual

EUT users manual for confirmation number EA97001

Note: This report may not be duplicated without prior written consent of Bay Area ComplianceLaboratory Corporation. This report must not be used by the client to claim productendorsement by NVLAP or any agency of the U.S. Government.FCC PART 15 Subpart CEUT Users ManualFORLG INFORMATION & COMMUNICATIONS, LTD.LG Kangseo B/D, 36, Munlae-Dong, 6-Ga,Youngdungpo-Gu, Seoul, 150-096, KoreaFCC ID: FFMGT8110CMarch 9, 2000This Report Concerns: Original ReportEquipment Type:Digital Spread SpectrumCordless Phone – HouseholdAppliancesTest Engineer: Thomas Huang / John ChanTest Date: February 25, 2000Reviewed By:John Y. Chan – Engineering ManagerPrepared By: Bay Area Compliance Laboratory Corporation230 Commercial Street, Suite 2Sunnyvale, CA 94086(408) 732-9162
LG Information & Communications, Ltd. FCC ID: FFMGT8110CReport # EUT User manual.doc FCC Part 15 Subpart C Test ReportPage 2 of 32TABLE OF CONTENTS1 - GENERAL INFORMATION....................................................................................................................................31.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT)................................................................................ 31.2 OBJECTIVE................................................................................................................................................................. 31.3 RELATED SUBMITTAL(S)/GRANT(S)......................................................................................................................... 31.4 TEST METHODOLOGY ............................................................................................................................................... 31.5 TEST FACILITY .......................................................................................................................................................... 31.6 TEST EQUIPMENT LIST.............................................................................................................................................. 41.7 EQUIPMENT UNDER TEST (EUT).............................................................................................................................. 4APPENDIX A – AGENT AUTHORIZATION LETTER............................................................................................ 5APPENDIX B – USER MANUAL.................................................................................................................................. 7FCC PART 15 WARNING:................................................................................................................................................ 9
LG Information & Communications, Ltd. FCC ID: FFMGT8110CReport # EUT User manual.doc FCC Part 15 Subpart C Test ReportPage 3 of 321 - GENERAL INFORMATION1.1 Product Description for Equipment Under Test (EUT)The LG Information & Communications, Ltd., FCC ID FFMGT8110C or the "EUT" as referred to in thisreport is a Digital Spread Spectrum Cordless Phone which has 20 channel possible in the 904-926MHz Bandwidth, and the transmission range up to 3 Kft in open sight, 600 ft in inhabited area (longerrange than analog 900MHz cordless phone).The EUT was composed of two parts: one is the handset which measures 7” L x 2.25” W x 1.00” H, theother is the base which measures 7.125” L x 5.5” W x 2.00” H.1.2 ObjectiveThis type approval report is prepared on behalf of LG Information & Communications, Ltd. in accordancewith Part 2, Subpart J, Part 15, Subparts A and B of the Federal Communication Commissions rules.The objective of the manufacturer is to demonstrate compliance with FCC rules for Output Power, 6 dBBandwidth, Power Density, Band Edge, Spurious Emission, Processing Gain, Antenna Gain, andConducted and Radiated Emission.1.3 Related Submittal(s)/Grant(s)No Related Submittals1.4 Test MethodologyAll measurements contained in this report were conducted with ANSI C63.4 –1992, American NationalStandard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical andElectronic Equipment in the range of 9 kHz to 40 GHz. All radiated and conducted emissionsmeasurement was performed at Bay Area Compliance Laboratory, Corp. The radiated testing wasperformed at an antenna-to-EUT distance of 3 meters.1.5 Test FacilityThe Open Area Test site used by Bay Area Compliance Laboratory Corporation to collect radiated andconducted emission measurement data is located in the back parking lot of the building at 230 CommercialStreet, Suite 2, Sunnyvale, California, USA.Test sites at Bay Area Compliance Laboratory Corporation has been fully described in reports submitted tothe Federal Communication Commission (FCC) and Voluntary Control Council for Interference (VCCI).The details of these reports has been found to be in compliance with the requirements of Section 2.948 ofthe FCC Rules on February 11 and December 10, 1997 and Article 8 of the VCCI regulations onDecember 25, 1997. The facility also complies with the radiated and AC line conducted test site criteriaset forth in ANSI C63.4-1992.The Federal Communications Commission and Voluntary Control Council for Interference has the reportson file and is listed under FCC file 31040/SIT 1300F2 and VCCI Registration No.: C-674 and R-657. Thetest sites has been approved by the FCC and VCCI for public use and is listed in the FCC Public AccessLink (PAL) database.
LG Information & Communications, Ltd. FCC ID: FFMGT8110CReport # EUT User manual.doc FCC Part 15 Subpart C Test ReportPage 4 of 32Additionally, Bay Area Compliance Laboratory Corporation is a National Institute of Standards andTechnology (NIST) accredited laboratory, under the National Voluntary Laboratory Accredited Program(NVLAP). The scope of the accreditation covers the FCC Method - 47 CFR Part 15 - Digital Devices,IEC/CISPR 22: 1993, and AS/NZS 3548: Electromagnetic Interference - Limits and Methods ofMeasurement of Information Technology Equipment test methods under NVLAP Lab Code 200167-0.1.6 Test Equipment ListManufacturer Description Model SerialNumber Cal. DueDataHP SpectrumAnalyzer 8566B 2610A02165 12/6/00HP SpectrumAnalyzer 8593B 2919A00242 12/20/00HP Amplifier 8349B 2644A02662 12/20/00HP Quasi-PeakAdapter 85650A 917059 12/6/00HP Amplifier 8447E 1937A01046 12/6/00A.H. System Horn Antenna SAS0200/571 261 12/27/00Com-Power Log PeriodicAntenna AL-100 16005 11/2/00Com-Power BiconicalAntenna AB-100 14012 11/2/00Solar Electronics LISN 8012-50-R-24-BNC 968447 12/28/00Com-Power LISN LI-200 12208 12/20/00Com-Power LISN LI-200 12005 12/20/00BACL Data EntrySoftware DES1 0001 12/20/00Rohde & Schwarz Signal Generator SMIQ03B 1125.5555.03 7/10/2002Rohde & Schwarz I/Q ModulationGenerator AMIQ 1110.2003.02 8/10/20021.7 Equipment Under Test (EUT)Manufacturer Description Model SerialNumber FCC IDLG Information &Communications, Ltd. Handset GT-8110C None FFMGT8110CLG Information &Communications, Ltd. Base GT-8110C None FFMGT8110C
LG Information & Communications, Ltd. FCC ID: FFMGT8110CReport # EUT User manual.doc FCC Part 15 Subpart C Test ReportPage 5 of 32Appendix A – AGENT AUTHORIZATION LETTER
LG Information & Communications, Ltd. FCC ID: FFMGT8110CReport # EUT User manual.doc FCC Part 15 Subpart C Test ReportPage 6 of 32
LG Information & Communications, Ltd. FCC ID: FFMGT8110CReport # EUT User manual.doc FCC Part 15 Subpart C Test ReportPage 7 of 32Appendix B – USER MANUAL
LG Information & Communications, Ltd. FCC ID: FFMGT8110CReport # EUT User manual.doc FCC Part 15 Subpart C Test ReportPage 8 of 32
LG Information & Communications, Ltd. FCC ID: FFMGT8110CReport # EUT User manual.doc FCC Part 15 Subpart C Test ReportPage 9 of 32FCC Part 15 Warning:Changes or modifications to this unit not expressly approved by the party responsible for compliance couldvoid the user’s authority to operate the equipment.
LG Information & Communications, Ltd. FCC ID: FFMGT8110CReport # EUT User manual.doc FCC Part 15 Subpart C Test ReportPage 10 of 32COMPANY LETTERHEADDIGITAL SECURITY CODE:The model(s) GT-8110C has the circuitry for digital security code to provideprotection against unintentional access. For each model, one of 16777216 kinds ofdigital security code is randomly selected and fixed in each telephone as it ismanufactured.D.S.Kim / Quality Engineering Dept.LG Information & Communications, Ltd.
LG Information & Communications, Ltd. FCC ID: FFMGT8110CReport # EUT User manual.doc FCC Part 15 Subpart C Test ReportPage 11 of 32
LG Information & Communications, Ltd. FCC ID: FFMGT8110CReport # EUT User manual.doc FCC Part 15 Subpart C Test ReportPage 12 of 32 USER’S MANUAL
LG Information & Communications, Ltd. FCC ID: FFMGT8110CReport # EUT User manual.doc FCC Part 15 Subpart C Test ReportPage 13 of 32GT-8110C (900MHz DSST WITH CALLER ID AND CALLWAITING ID) MANUALThis equipment has tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of theFCC Rules, These limits are designed to provide reasonable protection against harmful interference in a residentialinstallation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used inaccordance with the installation.If this equipment does cause harmful interference to radio or television reception, which can be determined byturning the equipment off and on, the user is encouraged to try to correct the interference by one or more of thefollowing measurements:o Reorient or relocate the receiving antenna.o Increase the separation between the equipment and receiver.o Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.o Consult the dealer or an experienced radio/TV technician for help. ++ CAUTION Changes or modification to device not expressly approved by LGIC could void the user’s authority to operate this equipment. Copyright 2000 by LGIC. All rights reserved. MODEL GT-8110C1999 LGIC. No part of this publication may reproduced, transcribed, stored in a retrieval system,or translated into any language in any form, by any means, without the written permission of LGIC.GETTING TO KNOW YOUR NEW PHONE Your new GT-8110C telephone gives you the ultimate in cordless telephone sound quality with the luxury of Caller ID and Call Waiting ID If this is your first cordless telephone, you'11 soon discover that your cordless is similar to regular telephone, except without the cord. If you've owned a cordless in the past, you'll discover that the GT8110C telephone is the most powerful and full-functioned Call Waiting ID cordless telephone on the market. Some key features are: m 60 name and number Caller ID/Call Waiting ID memory m 20 name and number programmable memory m Hearing-aid compatibility m High quality digital security communication m Dual mode voice mail serviceable (FSK , STUTTER) Unlike regular telephones, your cordless does not work during power failures. Because of this restriction, we do not recommend you have only cordless telephone in your residence.
LG Information & Communications, Ltd. FCC ID: FFMGT8110CReport # EUT User manual.doc FCC Part 15 Subpart C Test ReportPage 14 of 32UNPACKING YOUR PHONE In addition to this handbook, check that you have:7 Foot Line Cord for Wall Mounting D-AA600 x 3 3.6V 600mA Battery (This might not be pre-installed in your handset) AC Adapter
LG Information & Communications, Ltd. FCC ID: FFMGT8110CReport # EUT User manual.doc FCC Part 15 Subpart C Test ReportPage 15 of 32LOCATING KEYS, LIGHT, AND SWITCHESON THE BASE ¬ The PAGE key - is a homing system for finding the handset. If you press the PAGE key once, the handset beeps for 15seconds. - IN USE light - becomes lit when the GT8110C is being used. ® CHARGE light - comes on solid when the handset is in the base.RJ-11MDJACKDCJACKPAGEIN USECHARGENEWCALV. MAILTONE/PULSESWITCH
LG Information & Communications, Ltd. FCC ID: FFMGT8110CReport # EUT User manual.doc FCC Part 15 Subpart C Test ReportPage 16 of 32KeysTALK key-Turns the phone on or off so you can dial or talk.Voice mail key-. Directly access your V.Mail serviceDialing keys-Control manual dialing.Scroll keys 3 4 Scrolls through your Callers logRedial key- Redials your last out- bound call or inserts a pause in a number when entering numbers into memory. ¯ VOICE MAIL light – flashes slowly to alert you when you receive new messages in your Voice mail messages mail box. MESSAGE WAITING appears on the display. NEWCALL light – flashes more slowly when you receive new calls. This light continues to flash until you review the newcalls.ON THE HANDSET DELETE Key- Removes records from the Callers log or from memory dialing. MEM key-Allows you to store frequently dialed numbers and to dial directly from the speed dialing list. FLASH key- Allows you to switch between a call and a Call Waiting call. PGM key-Allows you to program your setting up your function or to edit a name and number in memory. VOLUME UP/DOWN KEY- Allows you to adjust the loudness of the handset earpiece, or the ringerVOLUMEss12 : 22 PM 12 / 01 CALL 01 ))1- 555 – 123 - 4567SMITH JOHNDEV.MttTALK2 ABC3 DEF4 GHI5 JKL6 MNO7 PQRS8 TUV9 WXYZ*70 OPER10#+1MUTE FLASH MEMèçPGM 1RE/PA
LG Information & Communications, Ltd. FCC ID: FFMGT8110CReport # EUT User manual.doc FCC Part 15 Subpart C Test ReportPage 17 of 32 or allows you to edit the character at Memory mode. CALLBACK key - Allows you to dial 7digits directly when you review the caller ID list. Allows you to dial 10digits directly when you review the caller ID list. Allows you to dial 1+10digits directly long distance when you review the caller ID list. (1+7digits)*70 OPER10#+1
LG Information & Communications, Ltd. FCC ID: FFMGT8110CReport # EUT User manual.doc FCC Part 15 Subpart C Test ReportPage 18 of 32 HEADSET Jack Allows you to add a headset to the handset (not included, but available by order.)HEADSET JACK
LG Information & Communications, Ltd. FCC ID: FFMGT8110CReport # EUT User manual.doc FCC Part 15 Subpart C Test ReportPage 19 of 32SETTING UP YOUR PHONE Now that you've checked the contents of the carton, it only takes a few steps to set up your phone.STEP 1. CHOOSE A CENTRAL LOCATION FOR THE BASE UNIT The base should be away from all other electronic equipment such as a personal computer, microwave, stereo ,or television. It is also a good idea to place the unit away from noisy areas, or from heat sources such as a radiator or direct sunlight.STEP 2. PLUG IN CORDS You can set your GT8110C telephone on a tabletop or you can mount the phone on a wall. When on a tabletop, you can place the handset with either the keys facing downward or upward. If you decide to use the wall mount position, you can also place the handset with the same-ward.To use on a tabletop or desk: 1.Take the long telephone line cord that comes with the phone and plug one end into the labeled TEL-LINE 2.Thread the long line cord through the channel in the housing to secure the cord. 3.Take the remaining end and plug it into the wall jack. 4.Plug the adapter tips into the adapter jack. Be sure that the tip is all the way into the jack. 5.Thread the adapter cord through the channel on the left-hand side of the bracket.To mount on a wall: 1.Locate the handset hook. It is a small square plastic piece located at the bottom of the handset receiver well. 2. Slide the handset hook up and turn it around so that the tab is the top. 3.Remove the mounting bracket from the bottom of the phone by pressing down on the two clips near the top.
LG Information & Communications, Ltd. FCC ID: FFMGT8110CReport # EUT User manual.doc FCC Part 15 Subpart C Test ReportPage 20 of 32 10. Insert the other end of the line cord into the wall jack. 11. Align the holes in the bracket over the wall-plate posts. 12. Slide the phone down until the phone is secure.STEP 3. PLUG IN THE ADAPTER Plug the adapter into an electrical outlet. Without AC power, your phone does not operate.STEP 4. ADD THE BATTERY TO THE HANDSET Use this procedure to install or to replace a "dead" battery. 6. Insert the 8 inch line cord into phone jack marked TEL LINE. 7. Thread the line cord through the channel on the right-hand side of the bracket to secure the cord. 8. Plug the adapter tip into the adapter jack. Be sure that the tip is all the way into the jack. 9. Thread the adapter cord through the channel on the left-hand side of the bracket.4. Turn the mounting bracket around so that the larger part the wedge is set the bottom of the phone.5. Use the same method to replace the bracket.
LG Information & Communications, Ltd. FCC ID: FFMGT8110CReport # EUT User manual.doc FCC Part 15 Subpart C Test ReportPage 21 of 32 ++ CAUTION Use only nickel-cadium(Ni-Cad)battery in the phone. 5. Replace the battery door.STEP 5. TURN THE HANDSET ON You MUST install the battery on the handset to turn on and use your phone. 1. Check the power is on and appears on the display 2. You'll hear the handset's ready tones and the 'READY' message appears on the display.STEP 6. CHARGE THE HANDSET Before you use the phone for the first time, you need to charge the battery for at least 6 hours. Place the handset in the base of the phone. The charge light the base then comes on. Whenever you need to charge your handset, you hear short beeps and see the 'LOW BATTERY' message. Press TALK and listen for dial tone to test for a fully charged handset. 1. Press down on the battery cover and slide the battery cover down to expose the battery well. 2. Locate the battery connectors inside the battery well. If you are replacing a dead battery, remove the old battery by pulling firmly on the battery cords. 3. Insert the battery plug into the connector. It is polarized and only insert in one direction. 4. Place the battery in the battery well.READY
LG Information & Communications, Ltd. FCC ID: FFMGT8110CReport # EUT User manual.doc FCC Part 15 Subpart C Test ReportPage 22 of 32STEP 7. Beginning the programming Sequence Most of the programming options appear in one screens. Press PGM key, SETUP PROGRAM appears on the screen. When you make a selection, the check mark, “33” moves to the selection you have made to use s or t key. After making a selection, the next programming screens appear. If you make a mistake, press ←← (review) key to go back to the previous prompt or start the programming sequence again. When you do not want to go on programming sequence, press PGM to save the previous items and you willexit the programming mode. To begin the programming sequence, press PGM keys and SETUP PROGRAM appears on the screen.STEP 8. Setting area code Many regions are changing how customers use their area codes. In order to dial from your call records and directory records, the GT8110C needs to distinguish between local and long distancenumbers.  If your region has seven digit dialing (you don't need to dial your area code when making a local call), enter your local area code as described in to set your local area code below.  If your region requires that you always dial ten digits when making local calls, also follow the procedure under to set other local area codes. If you are unsure on how your region works, please contact your local telephone co. TO ENTER AN AREA CODE, use the keypad. If you make a mistake, retype the area code. 8-1 To set your local area code If you set your area code, the GT-8110C telephone removes the area code from a call record within your own area. You need to program the code in order to dial with call records. 1. Press " PGM " key 2. Press →→ (REVIEW) key. The my area code screen display.SETUP PROGRAMMY AREA CODE_
LG Information & Communications, Ltd. FCC ID: FFMGT8110CReport # EUT User manual.doc FCC Part 15 Subpart C Test ReportPage 23 of 32 3. Press s or t key to enter your area code. The numbers appear on the display as you press the dial keys. If you make a mistake, press "DEL"key, and reenter the area code.STEP 9. SET VOICE MAIL If you subscribe to voice mail service from your local telephone company, The GT8110C can automatically alert you whenever you have new voice mail message in your mail box. 1. Press →→ (REVIEW) key 2. Press s or t key to set Voice Mail to ON or OFF. Setting this feature does not subscribe or cancel VOICE MAIL service. You must contact your local telephone Company to request a change in services.STEP 10. Turning on Callwaiting ID If you subscribe to CALL WAITING ID, turn this position ON 1. Press →→ (REVIEW) key 2. Press s or t key to set CALL WAITING ID to ON or OFF. Setting this feature does not subscribe or cancel CALL WAITING ID service. You must contact your local telephone company to request a change in services.STEP 11. Adding More units If you subscribe to call waiting ID and this is first call waiting ID unit (the display appears as 1’ST CWIDUNIT?) you must select "YES" However, if you already have a call waiting ID unit, you must select "NO". If you do not program this option correctly, you might not receive call waiting ID records consistently. 1. Press →→ (REVIEW) key 2. Press s or t key to set 1’ST CWID UNIT to YES or NO.VOICE MAIL33ON OFFCALL WAITING ID33ON OFF1ST CWID UNIT?33YES NO
LG Information & Communications, Ltd. FCC ID: FFMGT8110CReport # EUT User manual.doc FCC Part 15 Subpart C Test ReportPage 24 of 32STEP 12. SELECTING YOUR LANGUAGE You can choose between two different languages, English or Spanish. The screen SELECT LANGUAGE appears 1. Press →→ (REVIEW) key2. Press s or t key to set SELECT LANGUAGE to ENG or ESP.STEP 13. ANSWER PHONE WHEN PICKED UP There are two ways that the GT8110C can answer a call. The GT8110C can instantly answer incoming calls when you remove it from the cradle, or the phone can be set to answer after pressing the TALK key.. 1. Press →→ (REVIEW) key2. Press s or t key to set AUOT ANSWER to ON or OFF. If you set AUTO ANSWER to ON, GT8110C automatically answer incoming calls when removed from the cradle and also you could press any key to connect after incoming calls If you set AUTO ANSWER to OFF, press only TALK key before answering incoming calls.STEP 14. SET RING ON or OFF If you don't need to hear the ring sound and select RING ON or OFF. 1. Press →→ (REVIEW) key3. Press s or t key to set RING to ON or OFF.STEP 15. ADJUSTING THE CONTRAST 1. Press →→ (REVIEW) key2. To lighten the display, press s key while also pressings key repeatedly until you get the desired results. To darken the display, press t key while also pressing t key repeatedly until you get the desired results.SELECT LANGUAGE33ENG ESPAUTO ANSWER33ON OFFRING33ON OFFCONTRAST
LG Information & Communications, Ltd. FCC ID: FFMGT8110CReport # EUT User manual.doc FCC Part 15 Subpart C Test ReportPage 25 of 32STEP 16. COMPLETED SETUP Once you have finished installing your GT8110C, Your phone appears “READY” on the screenSTEP 17. SELECTING TONE/PUSE (T/P SWITCH) DIALING * If your home is equipped with touch-tone dialing service, set the T/P switch T(TONE) on the base. * If you only have rotary(pulse) dialing service, set the T/P switch P(PULSE) on the base.USING YOUR PHONE You can make calls many different ways with the GT8110C.DIALING 1. Press TALK key on the handset. 2. Use the number pad to dial the phone number. The phone number appears on the display as you enter the number. You also hear beeps for each digit as you dial. 3. Listen for a connection. 4. Press TALK to end your call.REDIALING Redial is a really fast method of calling your last number. Redial dials the last number you called whether you dialed it manually, or it was from a Call Record or the memory list. For more information on dialing from call records, See Dialing From Call Records on page 17. Redial is two-ways with the GT8110C * 1’ST method: Press TALK and press RE/PA * 2’nd method: Press RE/PA key, your phone is automatically connected and redialedUSING SPEED DIALING Another short cut for dialing is using speed dialing. First, create a speed dial list,SETUP COMPLETE
LG Information & Communications, Ltd. FCC ID: FFMGT8110CReport # EUT User manual.doc FCC Part 15 Subpart C Test ReportPage 26 of 32 as described in Creating Speed Dialing List on page 14. Then: 1. Press MEMO key. It displays " DIRECTORY "2. Press ←← or →→ (REVIEW) key and it displays " NAME and NUMBER " in MEMEORY 4. Press TALK to dial The phone automatically dials out whatever is shown on the display.USING FLASH To access your custom calling services, like Call Waiting, while you are on the telephone, press FLASH key.USING PAUSE If you want to add a three-second pause to number in your speed dialing list, press RE/PA key while creating the speed dial entry. For example, if you had a memory location dedicated to your voice mailbox, you might want add a pause in a dialing string for your PIN number. For more information about programming speed dialing numbers, see Creating a speed Dialing List on page 14.FINDING CLEAR RECEPTION Your GT8110C automatically selects 1 of 20 channels at the beginning of the call for the best reception.REACHING MAXIMUM RANGE The GT8110C handset and base communicate up to a certain maximum range. Weather, power lines, or other cordless telephones can affect this distance. The GT8110C beeps whenever you are on the phone and the handset moves out of range from the base. If you do not move back within range in 30 seconds, you lose your connection.CREATING A SPEED DIALING LIST In addition to your Call Records, you can store up to 20 speed dial names and numbers in memory. You can either enter name and number, or you can transfer a Call Record into your speed-dialing list. MANUAL METHOD 1. Press “ MEMO “ KEY at the 'READY' message.2. Press " PGM " key to edit a character and number.3. It displays like this.The cursor is blinking on the name field.DIRECTORY 015556667777SMITH JOHNDIRECTORY
LG Information & Communications, Ltd. FCC ID: FFMGT8110CReport # EUT User manual.doc FCC Part 15 Subpart C Test ReportPage 27 of 324. Enter the name, character by character. You can have up to 21 characters in the name field,(The 3'rdLine)DIRECTORY ADRESS NUMBER FIELD NAME FIELD a. Locate the character on the dialing keys 2 through 9. b. Press once to enter the first character, twice for the second character, etc. For example, to choose a P, press PQRS7 once, but to select an S, press PQRS7 four times. c. Use the ←← or →→ (REVIEW) Keys to move back and forth through the name. Use the 6 or 5 keys to move up and down.d. Create a space between names or words, by pressing the →→ (REVIEW) key twice after the lastcharacter.e. Special SymbolsYou can also use the 1 key to get the following symbols in the name field: & ïï ’ ïï ( ïï ) ïï . ïï 1 5. Enter the telephone number, area code first, using the dialing key pad. (2'nd Line number field) You can have up to 32 digits in the number field, If you make a mistake entering the telephone number, you must: a. Press PGM key to leave speed dialing list. b. Press PGM key to enter the speed dialing list again. c. Or, Use the ←← or →→ (REVIEW) keys to find the digit and press DEL key and re-enter the telephone number and the name. 6. Press MEMO key to store the complete record. The phone gives you a confirmation tone to let you know that the record is stored. CALLER ID METHOD A quick way to add to your speed dial list is to copy a Caller ID Call Record. At THE 'READY' screen: 1.Locate the Call Record that you want to copy using ←← or →→ (REVIEW) keys. 01 5 5 5 – 5 5 5 5SMITH JOHNNUMBER STORED10 : 35 PM 10 / 25 CALL 25 5 5 5 – 5 5 5 5SMITH JOHN
LG Information & Communications, Ltd. FCC ID: FFMGT8110CReport # EUT User manual.doc FCC Part 15 Subpart C Test ReportPage 28 of 32 2. Press MEMO key . You now see some of the information from the Call Record and displays "NUMBER STORED" and displays call record again. 3. The number of the memory location automatically is entered. DELETING SPEED DIALING NUMBERS You can erase unwanted speed dial numbers one-at-a-time. 1. Press MEMO key to see your speed dial list. 2. Use ←← or →→ (REVIEW) key to find the memory location you want. 3. Press DEL key once, and the GT-8110C asks if you want to delete this entry.4. Press DEL key again to delete the speed dial number. The GT-8110C clears the number, gives you a confirmation beep If you do not wish to delete the number, press MEMO key to cancel.ADJUSTING THE HANDSET VOLUME1. Press TALK key2. Press the s or t key to increase or decrease the VOLUME.The handset sounds an error tone when it reaches the upper or lower limits.ADJUSTING HANDSET RINGER VOLUME Press the s or t key on the handset while the phone is not in-use. You hear the sound of the ringer as you adjust the volume between the two levels.USER SLECTABLE RINGER TONES There are four user-selectable ringer tones available for this phone.1. While in the Stand-by mode, press the FLASH button2. Press a key (1 to 4) to select a ringer tone mode.NUMBER STORED 051 8 8 8 6 6 6 5 5 5 5DELETE ?
LG Information & Communications, Ltd. FCC ID: FFMGT8110CReport # EUT User manual.doc FCC Part 15 Subpart C Test ReportPage 29 of 32USING CALLER ID AND CALL WAITING ID One of the best features of your phone is Caller ID, which allows you to see information about an incoming call before you pick up the phone. With Caller ID service from your local telephone company, the GT-8110C telephone displays and records information about the call in a log. Possibly even better than Caller ID is Call Waiting ID. In addition to providing normal Caller ID information, Call Waiting ID allows you to see caller information while you are on a call. Now you can have the information you need to choose whether or not to answer a waiting call. Before you use these features on your GT-8110C telephone, you must first subscribe to the services through your local telephone company, and set "CALL WAITING ID ON or OFF" correctly during the SETTING UP YOUR PHONE procedure. For more details on CALLWAITING ID ON/OFF, see STEP 10. Turning on Callwaiting ID on page 11.RECEIVING NEW CALLS When you receive a new call, the information is stored under CALLER area. When you press ←← or →→ (REVIEW) key , it tells you: m How many total calls you have. m How many new calls you have since you last reviewed your calls. When you receive a call, the GT-8110C displays the caller information sent by the Telephone Company, called a Call Record. The call record consists of the following information: mm The caller's name( If available ) mm The caller's telephone number m The time and date of the call m A call record number m NEW CALL LCD display m MESSAGE WAITING (VOICE MAIL) indicator10 : 35 PM 10 / 25 25 5 5 5 – 5 5 5 5SMITH JOHNNEWALL : 23 NEW : 03 ))MESSAGE WAITING
LG Information & Communications, Ltd. FCC ID: FFMGT8110CReport # EUT User manual.doc FCC Part 15 Subpart C Test ReportPage 30 of 32REVIEWING CALL RECORDS To review a call Record: 1. Press ←← or →→ (REVIEW) to see how many new calls you have. 2. Use ←← or →→ (REVIEW) key to move though the Call Record list. * Press →→ (REVIEW) key to see the most recent call record. * Press ←← (REVIEW) key to see earlier calls. When you reach either end of the Call Record list, you see an 'END OF LIST' message. If you continue to press ←← or →→ (REVIEW) key, you scroll through the list again.DIALING FROM CALL RECORDS You can use your Call Records as a short-cut method of dialing. 1. Press ←← or →→ (REVIEW) key to see your Call Records. 2. Use ←← or →→ (REVIEW) key to find the desired Call Record. 3. Press , or key to dial. Allows you to dial 7digits directly when you review the caller ID list. Allows you to dial 10digits directly when you review the caller ID list. Allows you to dial 1+10digits directly long distance when you review the caller ID list. (1+7digits) The phone dials whatever is shown on the display.END OF LIST0 OPER10#+1*70 OPER10#+1*7
LG Information & Communications, Ltd. FCC ID: FFMGT8110CReport # EUT User manual.doc FCC Part 15 Subpart C Test ReportPage 31 of 32SAVING CALL RECORDS Your phone stores up to 60 Call Records before the memory becomes full. When the next call comes in, the oldest record drops off and makes room for the new Call Records. To save specific calls, delete old and unnecessary call records to keep from filling your phone's memory.DELETING CALL RECORDS You can either delete a single record or you can delete all Call Records at one time. To delete a single record: 1. Press to ←← or →→ (REVIEW) key to see your Call Records. 2. Use ←← or →→ (REVIEW) key to find the desired Call Record. 3. Press DEL key once, and the GT-8110C asks if you want to erase this Call Record. 4. Press DEL key again to erase the Call Record. The GT-8110C deletes the Call Record, gives you a confirmation beep, If you do not wish to delete the Call Record, press ←← or →→ (REVIEW) key to cancel. To delete all Call Records:1. Press ←← or →→ (REVIEW) key. The display shows you how many call records you have.2. Press DEL keyAnd the GT-8110C Asks if you want to delete all Call Records.3. Press DEL key again And theGT-8110C clears all Call Records, gives you a confirmation beep.10 : 35 PM 10 / 25 CALL 25 5 5 5 – 5 5 5 5DELETE ?ALL : 23 NEW : 03DELETE A LL ?
LG Information & Communications, Ltd. FCC ID: FFMGT8110CReport # EUT User manual.doc FCC Part 15 Subpart C Test ReportPage 32 of 32VOICE MAILSEEING LONG RECORDS If you receive long records on caller ID information, you could see that to use the s or t key. the s or t key allows you to scroll back and forth to see long records.1. Press ←← or →→ (REVIEW) key. The display shows you long records 2. Press s or t key to see remain numbersVOICE MAIL Voice Mail Service your calls when you are away from your phone or even while you are on the phone. The indicator Light flashes whenever you have message in your mailbox. And once you have programmed your Voice Mail key with your personal access codes, you can get your message at the touch of a button. You must subscribe to Voice Mail Service in order for this feature on your phone. To Program the Voice Mail Key. Using this method, you can store up to 32 digits per key-You can program digits, flash, pause, * or # , such as your mailbox number, your PIN, and any other additional codes that youneed.1. press MEMO key2. press VOICEMAIL key3. press PGM keyand then you will see the following display, The 2’nd line cursor(Number field) is blinking.4. You can store digits, # , * , Flash , Pause up to 32 digits5. press PGM key to cancel6. Press MEMO key to store To Use Voice Mail Once you have programmed your Voice Mail key, you can access your mail box by pressing l VOICE MAIL key10 : 35 PM 10 / 25 CALL 25ÜÜ55566677778902SMITH JOHN10 : 35 PM 10 / 25 CALL 2544455566677778ÛÛSMITH JOHN
LG Information & Communications, Ltd. FCC ID: FFMGT8110CReport # EUT User manual.doc FCC Part 15 Subpart C Test ReportPage 33 of 32CALLNOTES Not to use Voice Mail If you are not subscribing to a voice mail service from your local telephone company and you set VOICEMAIL to OFF in Set up Program mode, The GT8110C automatically change your voice mail key into Speed dial key. To Program the SPEED DIAL Key. Using this method, you can store up to 32 digits per key-You can program digits, flash, pause, * or # , such as your mailbox number, your PIN, and any other additional codes that youneed. 1. press MEMO key 2. press VOICEMAIL key 3. press PGM key and then, you will see the following display, The 2’nd line cursor(Number field) is blinking. You can store digits, # , * , Flash , Pause up to 32 digits 4. press PGM key to cancel4. Press MEMO key to store To Use SPEED DIAL Once you have programmed your SPEED DIAL key, you can access by pressing l VOICE MAILkeyVOICE MAILON 33OFF
LG Information & Communications, Ltd. FCC ID: FFMGT8110CReport # EUT User manual.doc FCC Part 15 Subpart C Test ReportPage 34 of 32READING DISPLAY MESSAGESThe GT-8110C informs you of status by displaying the following messages :Message DisplayALL CALLS & NEW CALLS: This message lets you knowhow many call records you have, and how many of those callrecords are new, In this example, you have 23 call records,and 3 new calls.CHARGING: The handset BATTERY is getting low.Place the handset in the base in order to recharge.DELETE ALL?: You pressed the DEL keyafter pressing the ←← or →→ (REVIEW) keyDELETE ? : To delete a single record, You pressed DEL keyafter pressing the ←← or →→ (REVIEW) key. END OF LIST: You have reached the end of the call records.Press either ←← or →→ (REVIEW) key to see other records.INCOMPLETE DATA : The message sent is incomplete dataThis message usually indicates temporary interference.There is no problem with the phone.MESSAGE WAITING : The GT8110C (base LED) flashesslowly to alert you and appears on the display“ Message waiting “ When you receive new messagesin your mail box.NO CALLS:There are no call records in the caller ID memory.ALL : 23 NEW : 03CHARGINGDELETE ALL ?END OF LISTINCOMPLETE DATA ))MESSAGE WAITING10 : 35 PM 10 / 25 CALL 25 5 5 5 – 5 5 5 5DELETE ?NO CALLS
LG Information & Communications, Ltd. FCC ID: FFMGT8110CReport # EUT User manual.doc FCC Part 15 Subpart C Test ReportPage 35 of 32Message DisplayNUMBER ONLY:Either name service is not available in your area,or you are subscribing to a number-only service.PRIVATE: The caller has purposely chosen toblock his/her phone number.TALK:The handset is on and ready for you to dial.PAGING :The Base is calling the handset.UNAVAILABLE: The Caller ID information, such as the name,or both the name and number, might not be available from thecaller’s area.LONG DISTANCE : The message sent is a long distance call.You might see this message alternate with other messages.LOW BATTERY :The handset is needed to replace the cradle.10 : 35 PM 10 / 25 CALL 25 5 5 5 – 5 5 5 510 : 35 PM 10 / 25 CALL 25 P R I V A T ET A L KPAGING10 : 35 PM 10 / 25 CALL 25 5 5 5 – 5 5 5 5UNAVAILABLE10 : 35 PM 10 / 25 CALL 25UNAVAILABLE10 : 35 PM 10 / 25 CALL 25 5 5 5 – 5 5 5 5SMITH JOHN10 : 35 PM 10 / 25 CALL 25 5 5 5 – 5 5 5 5LONG DISTANCELOW BATTERY
LG Information & Communications, Ltd. FCC ID: FFMGT8110CReport # EUT User manual.doc FCC Part 15 Subpart C Test ReportPage 36 of 32Message DisplayOUT OF RANGE:If you use the handset too far away from the base unitduring a call, the handset will alertyou by audio warning beeps(when using talk) and OUT OF RANGE appears on the display.NUMBER STORED : When you save the call records in thedirectory or create a speed dialing list, you will see the displaylike this.Forwarded CALLS : The message sent is a forwarded calls.You might see the 3 type messages alternate with othermessages.NEW CALL: This message lets you know that you have aNew messagesOUT OF RANGENUMBER STORED10 : 35 PM 10 / 25 CALL 25 5 5 5 – 5 5 5 5SMITH JOHN10 : 35 PM 10 / 25 CALL 25 5 5 5 – 5 5 5 5CFW. UNIVERSAL10 : 35 PM 10 / 25 CALL 25 5 5 5 – 5 5 5 5CFW. BUSY10 : 35 PM 10 / 25 CALL 25 5 5 5 – 5 5 5 5CFW. NO ANSWERNEWREADY
LG Information & Communications, Ltd. FCC ID: FFMGT8110CReport # EUT User manual.doc FCC Part 15 Subpart C Test ReportPage 37 of 32TROUBLESHOOTINGAre you having trouble with your phone?Here are some of the most common problem areas and solutions.SYMPTOM CORRECTIVE ACTIONNo dial tone * Verify that the line cord is connected and secure. * Check to see that you are not out of range to the base. * Check that the AC adapter is plugged into the outlet. * Check that the handset is fully charged. * Check to see that the Battery is connected inside the battery compartment.Phone doesn’t * Verify that the LINE CORD and AC adapter are plugged in correctly.ring * Check that the RING ON/OFF in your set up program mode. * Determine if you have too many communication devices hooked to a single line. A communication device can be a phone, modem, or facsimile (FAX) machine. Contact your local phone company business office for help calculating the limit for your residence or business. * Move the handset closer the baseThe phone has * Check to see that you are not out of range to the base.Static or fades * Check that the handset is fully charged.In and outCaller ID / * Verify that the CALLWAITING ID function is set correctlyCall Waiting ID See Step Turning CALLWAITNG ID ON or OFF on SETUP programdoesn’t work * Check your service. Call your local phone company’s Business Office to ensure thatproperly your services are active. ** Check for a power outage in your home area ** Check the AC adapter ** Check that the extension phone is being used.Charge Light ** Check whether the handset is making contact in the cradle.does Not work ** Check the AC adapter Be sure that the adapter is not damaged and that it is securely plugged into a working outlet. Also check that the wall plug is not controlled by a wall switch.Phone doesnot ** You might not have programmed your area code correctly.dial outcorrectly Please see Set up program my Area Codewhen using callrecords
LG Information & Communications, Ltd. FCC ID: FFMGT8110CReport # EUT User manual.doc FCC Part 15 Subpart C Test ReportPage 38 of 32Blank or faint ** Check the contrast control for the displayscreen see set up your program ** Check the AC adopter Be sure that the adapter is not damaged and that it is securely plugged into a working Outlet and the phone jack. Also check that the wall plug is not controlled by a wall switch or a power strip. ** You might not have received your first call record.SYMPTOM CORRECTIVE ACTIONNO DATA ** Check your service. Call your local phone company to ensure that youhave Caller ID or Call Waiting ID service. ** Check the answering machine. Ensure that your answering machine is set to answer after two rings. ** You answered the call before two rings. ** Check call Forwarding. Ensure that Call Forwarding is turned off. ** Contact your local phone company’s Service Department If the problem continues for more than 24 hours. Your local phone company central office may be temporarily experiencing an overload.INCOMPLETE DATA ** Call information was distorted before reaching the unit. Normal static on the telephone line can cause a line error and an INCOMPLETE DATA message. If this condition persists, check with your local telephone company to ensure that there is not a problem with your phone line.Handset does not ** Check that the AC adapter is plugged in and operating correctly.Charge. ** Check whether the handset is making contact in the cradle.PAGE key does ** The handset is not communicating with the base.not page The handset is either turned off, out of range, or the battery needs recharging.the handsetHandset does not ** Check the AC adapter. Be sure that the adapter is not damaged and thatwork it is securely plugged into a working Outlet and the phone jack. Also check that the wall plug is not controlled by a wall switch or a power strip. ** Verify that the handset is turned on ** place the in the cradle for several seconds. Ensure the handset is making contact in the cradle. ** Recharge the battery.

Navigation menu