LG Electronics USA 22LCHI LCD TV/Monitor User Manual SAC30708007 Edit1 en

LG Electronics USA LCD TV/Monitor SAC30708007 Edit1 en

Manual

© Copyright 2007, LG Electronics USA, Inc.Installation and Operating Guide | Warranty Model Numbers |19LS4D, 22LS4D |LCD TV
1WARNING / CAUTIONWARNING / CAUTIONTo prevent fire or shock hazards, do not exposethis product to rain or moisture.FCC NOTICEClass B digital deviceThis equipment has been tested and found to complywith the limits for a Class B digital device, pursuant toPart 15 of the FCC Rules. These limits are designedto provide reasonable protection against harmfulinterference in a residential installation. This equipmentgenerates, uses and can radiate radio frequency energyand, if not installed and used in accordance with theinstructions, may cause harmful interference to radiocommunications. However, there is no guarantee thatinterference will not occur in a particular installation.If this equipment does cause harmful interference toradio or television reception, which can be determinedby turning the equipment off and on, the user isencouraged to try to correct the interference by oneor more of the following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment andreceiver.- Connect the equipment to an outlet on a circuitdifferent from that to which the receiver is connected.- Consult the dealer or an experienced radio/TVtechnician for help.Any changes or modifications not expressly approvedby the party responsible for compliance could voidthe user’s authority to operate the equipment.CAUTIONDo not attempt to modify this product in any waywithout written authorization from LG Electronics.Unauthorized modification could void the user’sauthority to operate this product The lightning flash with arrowheadsymbol, within an equilateral triangle, isintended to alert the user to the presenceof uninsulated “dangerous voltage” within theproduct’s enclosure that may be of sufficientmagnitude to constitute a risk of electric shock topersons.The exclamation point within an equilateraltriangle is intended to alert the user tothe presence of important operating andmaintenance (servicing) instructions in the litera-ture accompanying the appliance.TO REDUCE THE RISK OF ELECTRIC SHOCKDO NOT REMOVE COVER (OR BACK). NOUSER SERVICEABLE PARTS INSIDE. REFER TOQUALIFIED SERVICE PERSONNEL.WARNING/CAUTIONTO REDUCE THE RISK OF FIRE AND ELECTRICSHOCK, DO NOT EXPOSE THIS PRODUCT TORAIN OR MOISTURE.NOTE TO CABLE/TV INSTALLERThis reminder is provided to call the CATV systeminstaller’s attention to Article 820-40 of the NationalElectric Code (U.S.A.). The code provides guidelines forproper grounding and, in particular, specifies that thecable ground shall be connected to the grounding systemof the building, as close to the point of the cable entryas practical.
2IMPORTANT SAFETY INSTRUCTIONSSAFETY INSTRUCTIONSImportant safety instructions shall be provided with each apparatus. This information shall be given in a separatebooklet or sheet, or be located before any operating instructions in an instruction for installation for use andsupplied with the apparatus. This information shall be given in a language acceptable to the country where the apparatus is intended to be used. The important safety instructions shall be entitled “Important Safety Instructions”. The following safetyinstructions shall be included where applicable, and, when used, shall be verbatim as follows. Additional safetyinformation may be included by adding statements after the end of the following safety instruction list. At themanufacturer’s option, a picture or drawing that illustrates the intent of a specific safety instruction may beplaced immediately adjacent to that safety instruction:Read these instructions.Keep these instructions.Heed all warnings.Follow all instructions.Do not use this apparatus near water.Clean only with dry cloth.Do not block any ventilation openings. Install inaccordance with the manufacturer’s instructions.Do not install near any heat sources such asradiators, heat registers, stoves, or other apparatus(including amplifiers)that produce heat.Do not defeat the safety purpose of the polarizedor grounding-type plug. A polarized plug hastwo blades with one wider than the other. Agrounding type plug has two blades and a thirdgrounding prong, The wide blade or the thirdprong are provided for your safety. If the providedplug does not fit into your outlet, consult anelectrician for replacement of the obsolete outlet.Protect the power cord from being walked onor pinched particularly at plugs, conveniencereceptacles, and the point where they exit fromthe apparatus.Only use attachments/accessories specified bythe manufacturer.Unplug this apparatus when unused for longperiods of time.Owner ManualOwner ManualOwner ManualOwner ManualOwner ManualOwner ManualOwner ManualOwner ManualOwner ManualOwner ManualOwner ManualOwner ManualOwner ManualOwner ManualOwner Manual12345678Owner ManualOwner Manual
3Use only with the cart, stand, tripod, bracket,or table specified by the manufacturer, or soldwith the apparatus. When a cart is used, usecaution when moving the cart/apparatuscombination to avoid injury from tip-over.Never touch this apparatus or antenna duringa thunder or lighting storm. Do not allow a impact shock or any objects tofall into the product, and do not drop onto thescreen with something.Refer all servicing to qualified service personnel.Servicing is required when the apparatus hasbeen damaged in any way, such as power-supplycord or plug is damaged, liquid has beenspilled or objects have fallen into the apparatus,the apparatus has exposed to rain or moisture,does not operate normally, or has beendropped.CAUTION concerning the Power Cord :Most appliances recommend they be placedupon a dedicated circuit; that is, a single outletcircuit which powers only that appliance andhas no additional outlets or branch circuits.Check the specification page of this owner'smanual to be certain.Do not overload wall outlets. Overloaded walloutlets, loose or damaged wall outlets, extensioncords, frayed power cords, or damaged orcracked wire insulation are dangerous. Any ofthese conditions could result in electric shockor fire. Periodically examine the cord of yourappliance, and if its appearance indicates dam-age or deterioration, unplug it, discontinue useof the appliance, and have the cord replacedwith an exact replacement part by an authorizedservicer. Protect the power cord from physicalor mechanical abuse, such as being twisted,kinked, pinched, closed in a door, or walkedupon. Pay particular attention to plugs, walloutlets, and the point where the cord exits theappliance.Outdoor use marking :WARNING - To reduce the risk of fire or elec-tric shock, do not expose this appliance to rainor moisture.Wet Location Marking : Apparatus shall not beexposed to dripping or splashing and noobjects filled with liquids, such as vases, shallbe placed on or over apparatus.GGRROOUUNNDDIINNGGEnsure that you connect the earth ground wireto prevent possible electric shock. If groundingmethods are not possible, have a qualifiedelectrician install a separate circuit breaker. Do not try to ground the unit by connecting itto telephone wires, lightening rods, or gas pipes.DDIISSCCOONNNNEECCTTIINNGG DDEEVVIICCEE FFRROOMM MMAAIINNSSMains plug is the disconnecting device. Theplug must remain readily operable.Owner ManualOwner ManualOwner ManualOwner ManualOwner ManualOwner ManualOwner ManualOwner ManualOwner ManualOwner ManualOwner ManualOwner Manual91210111314151617Power SupplyShort-circuitBreaker
4CONTENTSWARNING / CAUTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . 2INTRODUCTIONFeature of this TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6PREPARATIONAccessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7Front Panel Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8Back Panel Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Stand Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Detaching Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11Back Cover for Wire Arrangement . . . . . . . . . . . . . . . . . . . . . 12Positioning your display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13VESA Wall Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14Desktop Pedestal Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14Kensington Security System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15Attaching the TV to a Desk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15Antenna or Cable Connection . . . . . . . . . . . . . . . . . . . . . . . . . . 16EXTERNAL EQUIPMENT SETUPHD Receiver Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17DVD Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20VCR Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22Headphone Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24PC Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25WATCHING TV / CHANNEL CONTROLRemote Control Key Functions . . . . . . . . . . . . . . . . . . . . . . . . . 28Turning On TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29Channel Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29Volume Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29On-Screen Menus Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30Channel Search- Auto Scan (Auto Tuning) . . . . . . . . . . . . . . . . . . . . . . . . . . . 32- Add / Delete Channel (Manual Tuning) . . . . . . 33- Channel Editing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34Key Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 PICTURE CONTROLPicture Size (Aspect Ratio) Control . . . . . . . . . . . . . . . . . . 36Preset Picture Settings- Picture Mode - Preset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38- Color Tone - Preset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39Manual Picture Adjustment- Picture Mode - User Mode . . . . . . . . . . . . . . . . . . . . . . . . 40- Color Tone - User Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . 41DB - Digital Booster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42Advanced - Black (Darkness) Level . . . . . . . . . . . . . . . . . . . 43Picture Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44SOUND & LANGUAGE CONTROLPreset Sound Setting (Sound Mode) . . . . . . . . . . . . . . . . 45Sound Setting Adjustment - User Mode . . . . . . . . . . . 46Balance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47Stereo/SAP Broadcasts Setup . . . . . . . . . . . . . . . . . . . . . . . . . . 48Audio Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49On-Screen Menus Language Selection . . . . . . . . . . . . . 50Caption Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51- Analog Broadcasting System Captions . . . . . . . 52- Digital Broadcasting System Captions . . . . . . . . 53- Caption Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
5TIME SETTINGClock Setting- Auto Clock Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55- Manual Clock Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56Auto On/Off Timer Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57Sleep Timer Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58Auto Shut-off Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59PARENTAL CONTROL / RATINGSSet Password & Lock System- Setting up Your Password . . . . . . . . . . . . . . . . . . . . . . . . . 60- Set Password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61- Lock System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61Movie & TV Rating- Movie Rating (MPAA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62- TV Rating Children & General . . . . . . . . . . . . . . . . . . . 63APPENDIXTroubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66Product Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
6FEATURE OF THIS TVINTRODUCTIONIf the TV feels cold to the touch, there may be a small “flicker” when it is turned on. This is normal, there is noth-ing wrong with TV.Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots. However, theyhave no adverse effect on the monitor's performance.Avoid touching the LCD screen or holding your finger(s) against it for long periods of time. Doing so may producesome temporary distortion effects on the screen.On Disposala. The fluorescent lamp used in this product contains a small amount of mercury.b. Do not dispose of this product with general household waste.c. Disposal of this product must be carried out in accordance to the regulations of your local authority.LG's own special digital image generator, consistingof a full digital image processor, six different mainpicture quality factors.High-definition television. High-resolution digitaltelevision broadcast and playback system composedof roughly a million or more pixels, 16:9 aspect-ratioscreens, and AC3 digital audio. A subset of digitaltelevision, HDTV formats include 1080i and 720presolutions.Manufactured under license from Dolby Laboratories.“Dolby“and the double-D symbol are trademarks ofDolby Laboratories. HDMITM, the HDMI logo and High-DefinitionMultimedia Interface are trademarks or registeredtrademarks of HDMI Licensing.".
PREPARATION7PREPARATIONACCESSORIESEnsure that the following accessories are included with your product. If an accessory is missing, please contactthe dealer where you purchased the product. User must use shielded signal interface cables (D-sub 15 pin cable) with ferrite cores to maintain standardcompliance for the product.OOppttiioonn EExxttrraassD-sub 15 pin CableOwner's Manual1.5V 1.5VOwner’s Manual CD Manual123456780-9VOLCHBACKMUTEADJUSTEXITCCFAVSOUNDTIMERNPUT123456780-9VOLCHENTERPOWERBACKMUTEMENUADJUSTEXITCCSAPFAVPICTURESOUNDTIMERTVINPUTRemote Control,BatteriesPower CordLCD TVOwner's Manualhttp://www.zenith.comP/NO.SAC30708007 (0706-REV00)Copyright© 2007 LG Electronics USA, Inc.,All Rights Reserved.Cable Management* Slightly wipe stained spot on the exterior only with the polishingcloth for the product exterior if there is stain or fingerprint onsurface of the exterior.* Do not wipe roughly when removing stain. Please be cautions ofthat excessive pressure may cause scratch or discoloration.Polishing Cloth
PREPARATION8FRONT PANEL INFORMATIONPREPARATION■Here shown may be somewhat different from your TV.Remote Control SensorPower/Standby IndicatorIlluminates red in standby mode.When the TV is turned on, the indicatorblinks green and then illuminates greenbefore the picture is displayed.INPUT MENU VOL CH/IENTERCHANNEL(EE,DD)ButtonsVOLUME(FF,GG)ButtonsMENUButtonENTERButtonINPUTButtonPOWERButtonGGIf your product has a protection tape attached, remove the tape.And then wipe the product with a cloth (If a polishing cloth is included with your product, use it).NOTE!
PREPARATION9BACK PANEL INFORMATIONSERVICE ONLYHDMI/DVI INConnect a HDMI signal to this jack.Or DVI (Video) signal to this jack with a HDMI toDVI cable.AV IN (Audio/Video)Connect audio/video output from an externaldevice to these jacks.S-VIDEO Connect S-Video out from an S-VIDEO device.ANTENNA/CABLE INConnect over-the air signals to this jack.Connect cable signals to this jack.RGB (PC) INConnect the output from a PC.AUDIO IN (RGB/DVI)Connect the audio from a PC or DTV.COMPONENT INConnect a component video/audio device tothese jacks.HEADPHONE INPUTPlug the headphone into the headphone socket.RS-232C IN (CONTROL & SERVICE) PORTFor external control devices.Power Cord SocketFor operation with AC power. Caution: Never attempt to operate the TV on DCpower.165789234VIDEOAUDIO(MONO)S-VIDEOANTENNA/CABLE INRS-232C IN(SERVICE ONLY)RGB (PC) INAUDIO IN(RGB/DVI)SERVICEONLYAV INH/PHDMI/DVI IN VIDEOAUDIOCOMPONENT IN8 7 6123549■Here shown may be somewhat different from your TV.
PREPARATION10STAND INSTALLATIONPREPARATION■Here shown may be somewhat different from your TV.Insert the SSTTAANNDD BBOODDYYinto the product until clicking sound.Carefully place the product screen side down on a cushioned surface that will protect product and screenfrom damage.Assemble the parts of the SSTTAANNDD BBOODDYYwith CCOOVVEERR BBAASSEEof the product.SSTTAANNDD BBOODDYY314Hold the HHIINNGGEE BBOODDYYand bend it upward.2HHIINNGGEE BBOODDYYCCOOVVEERR BBAASSEE
PREPARATION11DETACHING STANDCarefully place the product screen side down ona cushioned surface that will protect product andscreen from damage.Pull cover base backward while pressing buttonon stand body.Shake the base while pulling, it will separate fromstand body.Pull stand body to separate from set while press-ing the 2 latches.■Here shown may be somewhat different from your TV.1 2435Hold the HHIINNGGEE BBOODDYYand bend it upward.HHIINNGGEE BBOODDYY
PREPARATION12BACK COVER FOR WIRE ARRANGEMENTPREPARATIONConnect the cables as necessary.To connect an additional equipment, see the EEXXTTEERRNNAALL EEQQUUIIPPMMEENNTTSSEETTUUPPsection.Install the CCAABBLLEE MMAANNAAGGEEMMEENNTTas shown.First, press the cable management. Hold the CCAABBLLEE MMAANNAAGGEEMMEENNTTwith both hands and pull it upward.NOTE!GGDo not hold the CCAABBLLEE MMAANNAAGGEEMMEENNTT when moving the product.- If the product is dropped, you may be injured or the product may be broken.How to remove the CABLE MANAGEMENT■Here shown may be somewhat different from your TV.12
PREPARATION13POSITIONING YOUR DISPLAY■Here shown may be somewhat different from your TV.■Adjust the position of the panel in various ways for maximum comfort.• Tilt range12~1030
PREPARATION14VESA WALL MOUNTINGPREPARATIONFor proper ventilation, allow a clearance of 4inches on all four sides from the wall.GGEnsure adequate ventilation by following the clearance recommendations.CAUTIONDESKTOP PEDESTAL INSTALLATIONThis product accepts a VESA-compliant mounting interface pad. (optional)There 4 threaded holes are available for attaching the bracket.GGScrew length needed depends on the wall mount used. For further information, refer to the VESAWall Mounting Instruction Guide.NOTE!100 mm100 mm4 inches4 inches4 inches 4 inches
PREPARATION15KENSINGTON SECURITY SYSTEMATTACHING THE TV TO A DESK (Only 23 inches)- The TV is equipped with a Kensington Security System connector on the back panel. Connect theKensington Security System cable as shown below.- For the detailed installation and use of the Kensington Security System, refer to the user’s guide providedwith the Kensington Security System.For further information, contact hhttttpp::////wwwwww..kkeennssiinnggttoonn..ccoomm, the internet homepage of theKensington company. Kensington sells security systems for expensive electronic equipment such as note-book PCs and LCD projectors.NOTE- The Kensington Security System is an optional accessory.The TV must be attached to a desk so it cannot be pulled in a forward/backward direction, potentially causinginjury or damaging the product. GGThis apparatus must be securely attached to the floor/wall per installation instructions. Tipping, shak-ing, or rocking the machine may cause injury/death.WARNINGDeskStand2-Screws (M3x25)(not provided as partsof the product)
PREPARATION16ANTENNA OR CABLE CONNECTIONPREPARATION1. Antenna (Analog or Digital)Wall Antenna Socket or Outdoor Antenna without a Cable BoxConnections.For optimum picture quality, adjust antenna direction if needed.2. CableWallAntennaSocketOutdoorAntenna(VHF, UHF)Cable TVWall JackMulti-family Dwellings/Apartments(Connect to wall antenna socket)RF Coaxial Wire (75 ohm)RF Coaxial Wire (75 ohm)Single-family Dwellings /Houses(Connect to wall jack for outdoor antenna)Be careful not to bend the bronze wirewhen connecting the antenna.Copper WireANTENNA/CABLE INANTENNA/CABLE INANTENNA/CABLE INANTENNA/CABLE INGGThe TV will let you know when the analog, cable, and digital channel scans are complete.NOTE!■To improve the picture quality in a poor signal area, please purchase a signal amplifier and install properly. ■If the antenna needs to be split for two TV’s, install a 2-Way Signal Splitter.■If the antenna is not installed properly, contact your dealer for assistance.AntennaUHFSignalAmplifierVHF3. Using both cable and antennaCable TVWall JackAntennaRF Coaxial Wire (75 ohm)RF Coaxial Wire (75 ohm)Diplexer(SignalCombiner)
EXTERNAL EQUIPMENT SETUP17HD RECEIVER SETUPEXTERNAL EQUIPMENT SETUPThis TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if youdo receive digital signals from a digital set-top box or other digital external device, refer to the figure as shownbelow.■To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment.IDEOAUDIO(MONO)S-VIDEORGB (PC) INAUDIO IN(RGB/DVI)AV INH/PANTENNA/CABLE INVIDEOAUDIOCOMPONENT INY L RPBPRWhen connecting Component cable121. How to connectConnect the video outputs (Y, PB, PR)of the digital set top box to the CCOOMMPPOONNEENNTT IINN VVIIDDEEOO jacks onthe set. Match the jack colors (Y = green, PB= blue, and PR= red).Connect the audio output of the digital set-top box to the CCOOMMPPOONNEENNTT IINN AAUUDDIIOO jacks on the set.212. How to use■Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box. operation)■Select CCoommppoonneenntt input source by using the IINNPPUUTTbutton on the remote control.
EXTERNAL EQUIPMENT SETUP18EXTERNAL EQUIPMENT SETUPWhen connecting HDMI cableConnect the digital set-top box to HHDDMMII//DDVVII IINNjack on the set.No separated audio connection is necessary.HDMI supports both audio and video.1. How to connect2. How to use■Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.)■Select HHDDMMII//DDVVIIinput source by using the IINNPPUUTTbutton on the remote control.21VIDEOAUDIO(MONO)S-VIDEORS-232C IN(SERVICE ONLY)SERVICEONLYHDMI/DVI INAV INH/PANTENNVIDEOCOHDMI-DTV OUTPUT1GGWhen connected, the TV will tell a connected device whatresolution it supports and the resolution it prefers. If thedevice supports this Auto HDMI function, the player outputresolution will be automatically set to 720p.GGIf the device does not support Auto HDMI, you need to setthe output resolution appropriately. NOTE!
EXTERNAL EQUIPMENT SETUP19When connecting HDMI to DVI cableVIDEOAUDIO(MONO)S-VIDEORS-232C IN(SERVICE ONLY)RGB (PC) INAUDIO IN(RGB/DVI)SERVICEONLYHDMI/DVI INAV INH/PANTENNA/CABLE INVIDEOAUDIOCOMPONENT INL RDVI-DTV OUTPUTConnect the DVI output of the digital set-top box to the HHDDMMII//DDVVII IINN jack on the set.Connect the audio output of the digital set-top box to the AAUUDDIIOO IINN ((RRGGBB//DDVVII))jack on the set.1. How to connect■Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.)■Select HHDDMMII//DDVVIIinput source by using the IINNPPUUTTbutton on the remote control.2. How to use2112
EXTERNAL EQUIPMENT SETUP20DVD SETUPEXTERNAL EQUIPMENT SETUPWhen connecting Component cableVIDEOAUDIO(MONO)S-VIDEORGB (PC) INAUDIO IN(RGB/DVI)AV INH/PANTENNA/CABLE INVIDEOAUDIOCOMPONENT INY L RPBPRComponent Input portsTo get better picture quality, connect a DVD player to the component input ports as shown below.Component ports on the TVYPBPRVideo output ports on DVD playerYYYYPBB-YCbPbPRR-YCrPrConnect the video outputs (Y, PB, PR)of the DVD to theCCOOMMPPOONNEENNTT IINN VVIIDDEEOO jacks on the set.Match the jack colors (Y = green, PB= blue, and PR= red).Connect the audio outputs of the DVD to the CCOOMMPPOONNEENNTT IINN AAUUDDIIOO jacks on the set.1. How to connect2. How to use■Turn on the DVD player, insert a DVD.■Select CCoommppoonneenntt input source by using the IINNPPUUTTbutton on the remote control.■Refer to the DVD player's manual for operating instructions.2112
EXTERNAL EQUIPMENT SETUP21When connecting with an S-Video cableVIDEOAUDIO(MONO)S-VIDEO32C INCE ONLY)RGB (PC) INAU(RGDVI INAV INH/PANTENNA/CABLE INVIDEOAUDIOCOMPONENT INL R S-VIDEOAUDIO12Connect the S-VIDEO output of the DVD to theSS--VVIIDDEEOOinput on the set.Connect the audio outputs of the DVD to the AAUUDDIIOOinput jacks on the set.1. How to connect2. How to use■Turn on the DVD player, insert a DVD.■Select AAVV input source by using the IINNPPUUTTbutton on theremote control.■Refer to the DVD player's manual for operating instructions.21VIDEOAUDIO(MONO)S-VIDEORS-232C IN(SERVICE ONLY)SERVICEONLYHDMI/DVI INAV INH/PANTEVIDECHDMI-DVD OUTPUT1When connecting HDMI cableConnect the HDMI output of the DVD to theHHDDMMII//DDVVII IINNjack on the set.No separated audio connection is necessary.HDMI supports both audio and video.1. How to connect2. How to use■Select HHDDMMII//DDVVIIinput source by using the IINNPPUUTTbutton on the remote control.■Refer to the DVD player's manual for operating instructions.21GGWhen connected, the TV will tell a connected device whatresolution it supports and the resolution it prefers. If thedevice supports this Auto HDMI function, the player out-put resolution will be automatically set to 720p.GGIf the device does not support Auto HDMI, you need toset the output resolution appropriately. To get the best picture quality, adjust the output resolutionof the DVD to 720p.NOTE!
EXTERNAL EQUIPMENT SETUP22VCR SETUPEXTERNAL EQUIPMENT SETUPWhen connecting with an antenna■To avoid picture noise (interference), leave an adequate distance between the VCR and TV.■If the 4:3 picture format is used; the fixed images on the sides of the screen may remain visible on thescreen. This phenomenon is common to all manufactures and in consequence the manufactures warrantydoes not cover the product bearing this phenomenon.VIDEOAUDIO(MONO)S-VIDEORS-232C IN(SERVICE ONLY)RGB (PC) INAUDIO IN(RGB/DVI)SERVICEONLYHDMI/DVI INAV INH/PANTENNA/CABLE INVIDEOAUDIOCOMPONENT INL R S-VIDEOVIDEOOUTPUTSWITCHANT INANT OUTWall JackAntenna12Connect the RF antenna out socket of the VCR to the AANNTTEENNNNAA//CCAABBLLEE IINNsocket on the set.Connect the antenna cable to the RF antenna in socket of the VCR.1. How to connect■Set VCR output switch to 3 or 4 and then tune TV to the same channel number.■Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.)2. How to use21
EXTERNAL EQUIPMENT SETUP23When connecting with a RCA cableGGDo not connect to both Videoand S-Video at the same time. Inthe event that you connect bothVideo and the S-Video cables,only the S-Video will work.CAUTIONGGThe picture quality is improved: compared to normalcomposite (RCA cable) input.NOTE!VIDEOAUDIO(MONO)S-VIDEORS-232C IN(SERVICE ONLY)RSERVICEONLYHDMI/DVI INAV INH/PANTENNVIDEOCOML RS-VIDEO VIDEOOUTPUTSWITCHANT INANT OUTVIDEOAUDIO(MONO)S-VIDEOS-232C INVICE ONLY)RGB (PC) INA(MI/DVI INAV INH/PANTENNA/CABLE INVIDEOAUDIOCOMPONENT INL R S-VIDEOAUDIOConnect the AAUUDDIIOO/VVIIDDEEOOjacks between TV andVCR. Match the jack colors (Video = yellow, Audio Left= white, and Audio Right = red)1. How to connect2. How to use■Insert a video tape into the VCR and press PLAY on theVCR. (Refer to the VCR owner’s manual.)■Select AAVV input source by using the IINNPPUUTTbutton on theremote control.When connecting with an S-Video cableConnect the S-VIDEO output of the VCR to theSS--VVIIDDEEOO input on the set.Connect the audio outputs of the VCR to the AAUUDDIIOOinput jacks on the set.1. How to connect2. How to use■Insert a video tape into the VCR and press PLAY on the VCR.(Refer to the VCR owner’s manual.)■Select AAVV input source by using the IINNPPUUTTbutton on theremote control.121GGIf you have a mono VCR, connect the audio cable fromthe VCR to the AAUUDDIIOO LL//MMOONNOOjack of the set.NOTE!112
EXTERNAL EQUIPMENT SETUP24HEADPHONE SETUPEXTERNAL EQUIPMENT SETUPYou can listen to the sound through the headphone.Plug the headphone into the headphone socket.To adjust the headphone volume, press the VVOOLL + or- button. If you press the MMUUTTEEbutton, the soundfrom the headphone is switched off.1. How to connect21VIDEOA(MONRS-232C IN(SERVICE ONLY)SERVICEONLYHDMI/DVI INH/P
EXTERNAL EQUIPMENT SETUP25PC SETUPThis TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. When connecting D-sub 15pin cableAUDIO(MONO)S-VIDEORGB (PC) INAUDIO IN(RGB/DVI)AV INH/PVIDEOAUDIOCOMPONENT INAUDIORGB OUTPUTConnect the RGB output of the PC to the RRGGBB ((PPCC))IINNjack on the set.Connect the PC audio output to the AAUUDDIIOO IINN((RRGGBB//DDVVII))jack on the set.1. How to connect2. How to use■Turn on the PC and the TV.■Select RRGGBB--PPCCinput source by using the IINNPPUUTTbuttonon the remote control.2112When connecting HDMI to DVI cableConnect the DVI output of the PC to the HHDDMMII//DDVVIIIINNjack on the set.Connect the PC audio output to the AAUUDDIIOO IINN((RRGGBB//DDVVII))jack on the set.1. How to connect2. How to use■Turn on the PC and the TV.■Select HHDDMMII//DDVVIIinput source by using the IINNPPUUTTbut-ton on the remote control.21VIDEOAUDIO(MONO)RS-232C IN(SERVICE ONLY)SERVICEONLYHDMI/DVI INAV INH/PDVI-PC OUTPUT AUDIOAUDIO IN(RGB/DVI)DIO12
EXTERNAL EQUIPMENT SETUP26EXTERNAL EQUIPMENT SETUPGGTo get the the best picture quality, adjust the PCgraphics card to 1024x768, 60Hz.GGDepending on the graphics card, DOS mode maynot work if a HDMI to DVI Cable is in use.GGIf the video doesn’t fit the screen, try pressing theADJUST button to adjust the screen position of TV.GGCheck the image on your TV. There may be noiseassociated with the resolution, vertical pattern,contrast or brightness in PC mode. If noise ispresent, change the PC output to another resolu-tion, change the refresh rate to another rate oradjust the brightness and contrast on the VIDEOmenu until the picture is clear. If the refresh rate ofthe PC graphic card can not be changed, changethe PC graphic card or consult the manufacturer ofthe PC graphic card.GGAvoid keeping a fixed image on the screen for along period of time. The fixed image may becomepermanently imprinted on the screen.GGThe synchronization input form for Horizontal andVertical frequencies is separate.NOTES!Supported Display Specifications * RGB-PC mode onlyHorizontal Vertical Frequency(KHz)Frequency(Hz)31.469 70.0831.469 70.0831.469 59.9437.879 60.3148.363 60.0047.776 59.8747.712 60.0160.023 60.0031.469 59.9431.500 60.0044.96 59.9445.000 60.0033.72 59.9433.75 60.00Resolution 720x4001360x768640x350640x480800x6001024x7681280x7681366x768720x4801280x7201920x1080* HDMI mode only
EXTERNAL EQUIPMENT SETUP27Screen Setup for PC modeOverviewWhen the RGB input of the set is connected to a PC output, selectthe RGB-PC as the main input mode.When HDMI connect to PC output and select HDMI/DVI input, thisfunction is used.After connecting RGB-PC or HDMI/DVI to PC output and checkingthe screen quality.When you change the resolution, select the proper resolution in pre-sent input to see the best picture appearance.Adjustment for screen Resolution, Position, Size,and PhasePress the AADDJJUUSSTTbutton and then use DD or EEbutton toselect RReessoolluuttiioonn, PPoossiittiioonn, SSiizzee, or PPhhaassee.Press the EENNTTEERRbutton and then use DD EE FFGG button tomake appropriate adjustments.■The PPhhaasseeadjustment range is 00 ~++6644.In HDMI/DVI-PC mode, PPhhaassee is not available.■The SSiizzeeadjustment range is --3300 ~++3300.In HDMI/DVI-PC mode, SSiizzeeis not available.Press the EENNTTEERRbutton.Auto Configuration and Initializing (Reset tooriginal factory values)Press the AADDJJUUSSTTbutton and then use DD or EEbutton toselect AAuuttooor RReesseett.Press the EENNTTEERR button and then use FFor GG button toselect YYeess.Press the EENNTTEERRbutton.ENTERBACKCCMENU EXIT1231231 2 31 2 3ResolutionPositionSizePhaseAutoResetSelectPrev OkDDEEADJUST1024 x 7681280 x 7681360 x 768RReessoolluuttiioonnThis function allows you selectresolution of XGA/WXGA.PPoossiittiioonnThis function is to adjust picture toleft/right and up/down as you prefer.SSiizzeeThis function is to minimize any ver-tical bars or stripes visible on thescreen background. And the hori-zontal screen size will also change. PPhhaasseeThis function allows you toremove any horizontal noise andclear or sharpen the image of char-acters.AAuuttooThis function is to adjust pictureposition and minimizes image shakingautomatically.RReesseettThis function is to initialize theadjusted value.Initialize SettingsYes NoSelectPrev OkFFGGADJUSTResolutionPositionSizePhaseAutoResetStart Auto configurationYes NoSelectPrev OkFFGGADJUSTResolutionPositionSizePhaseAutoReset
WATCHING TV / CHANNEL CONTROL28REMOTE CONTROL FUNCTIONSWATCHING TV / CHANNEL CONTROLWhen using the remote control, aim it at the remote control sensor on the TV.123456780-9VOL CHENTERPOWERBACKMUTEMENUADJUSTEXITCCSAPFAVPICTURE SOUNDTIMERTVINPUTSAPPICTURESOUNDTIMERVOLUME UP/DOWNADJUSTMUTECCCHANNELUP/DOWNMENUBACKEXITTHUMBSTICK(Up/Down/LeftRight/ENTER)Analog mode: Selects MTS sound (Mono, Stereo, or aSAP) GGpp..4488DTV mode: Changes the audio language.Selects the factory preset picture depend on the viewingenvironment. GGpp..3388Selects the factory preset sound for type of program. GGpp..4455Select the amount of time before your TV turns off auto-matically. GGpp..5588Increase/decrease the sound level.Adjust the screen resolution, position, size and phase. GGpp..2277Switch the sound on or off. GGpp..3300Select a closed caption. GGpp..5511Select available channels.Displays the main menu. Tune to the last channel viewed.Clear all on-screen displays and return to TV viewing fromany menu.Navigate the on-screen menus and adjust the system set-tings to your preference.
WATCHING TV / CHANNEL CONTROL29■Open the battery compartment cover on the backside and install the batteries matching correctpolarity (+ with +, - with -).■Install two 1.5V AAA batteries. Don’t mix old orused batteries with new ones.■Close cover.■Use a remote control up to 7 meters distanceand 30 degree (left/right) within the receivingunit scope.■Dispose of used batteries in a recycle bin topreserve environment.123456780-9POWERSAPFAVPICTURE SOUNDTIMERTVINPUTInstalling Batteries Remote control effective rangeNUMBER buttonTurns your TV or any other programmed equipment on or off, depending on the mode.In AV, Component, RGB-PC, and HDMI/DVI input sources, screen returns to the last TV channel.External input modes rotate in regular sequence: TV, AV, Component, RGB-PC, and HDMI/DVI.(AV, Component, RGB-PC, and HDMI/DVI input sources are linked automatically, only if adevice is connected.)Used to enter a program number for multiple program channels such as 2-1, 2-2, etc.Scroll through the programmed Favorite channels. GGpp..3344POWERTVINPUT— (DASH)FAV
WATCHING TV / CHANNEL CONTROL30TURNING ON TVWATCHING TV / CHANNEL CONTROLNOTE!GGIf you intend to be away on vacation, disconnect the power plug from the wall power outlet.First, connect power cord correctly. At this moment, the TV switches to standby mode.■In standby mode to turn TV on, press the , IINNPPUUTT,CCHH ((DD or EE))button on the TV or press the PPOOWWEERR, IINNPPUUTT, TTVV, CCHH ((+ or -)),NNuummbbeerr ((00~99))button on the remote control.Select the viewing source by using the IINNPPUUTTbutton on the remote con-trol.■This TV is programmed to remember which power state it was last setto, even if the power cord is out.When finished using the TV, press the PPOOWWEERRbutton on the remotecontrol. The TV reverts to standby mode.123456780-9VOL CHPOWERBACKMUTEADJUSTCCSAPFAVMENU EXITPICTURE SOUNDTIMERTV INPUT123123456780-9VOL CHMUTEADJUSTCCFAVPress the CCHH((+ or -))or NNUUMMBBEERRbuttons to select a channel number.1VOLUME ADJUSTMENTCHANNEL SELECTIONPress the VVOOLL((+ or -))button to adjust the volume.If you want to switch the sound off, press the MMUUTTEEbutton. You can cancel the Mute function by pressing the MMUUTTEEor VVOOLL ((+ or -))button.0-VOL CHBACKMUTEADJUSTCCFAVMENU EXITAdjust the volume to suit your personal preference.123
WATCHING TV / CHANNEL CONTROL31ON-SCREEN MENUS SELECTIONPress the MMEENNUUbutton and then use DD or EE button to select the each menu.Press the GG button and then use DD EE FF GG button to display the available menus.Your TV's OSD (On Screen Display)may differ slightly from what is shown in this manual.21SETUP PICTURETIMEAUDIOSound Mode : StandardBalance : 0Clock : Oct 19, 2007, 03:44 AMOff Time : OffOn Time : OffSleep Time : OffAuto Sleep : OffLanguage : EnglishKey Lock : OffCaption : OffLock System : OffSet PasswordMovie RatingTV Rating-ChildrenTV Rating-GeneralOPTIONLOCKAuto TuningManual TuningChannel EditPicture Mode : UserColor Temperature : CoolDBAdvancedAspect Ratio : 16:9Picture Reset
WATCHING TV / CHANNEL CONTROL32CHANNEL SEARCHWATCHING TV / CHANNEL CONTROLPress the MMEENNUUbutton and then use DD or EE buttonto select the SSEETTUUPPmenu.Press the GG button and then use DD or EE button toselect AAuuttoo TTuunniinngg.Press the EENNTTEERRbutton to begin the channel search.Allow AAuuttoo TTuunniinnggto complete the channel searchcycle for AANNTTEENNNNAAand CCAABBLLEE.Automatically finds all channels available through antennaor cable inputs, and stores them in memory on the channellist. Run Auto Tuning again after any Antenna/Cable connectionchanges. A password is required to gain access to Auto Tuning menuif the Lock System is turned on.231123ENTERBACKCCMENU EXITAuto Scan (Auto Tuning)Auto TuningManual TuningChannel EditAuto Tuning GManual TuningChannel EditSelection ( Gor ) leads you to the Auto Tuning screen.Auto Tuning GManual TuningChannel EditSelection ( Gor ) leads you to the Auto Tuning screen.Processing Auto Tuning...TV CH 23Found Channel(s): 16Press to stop thecurrent scan and startTV channel scan.MENU PrevNext
WATCHING TV / CHANNEL CONTROL33A password is required to gain access to Manual Tuningmenu if the Lock System is turned on.If selecting DTV or CADTV input signal, you can view theon-screen signal strength monitor to see the quality of thesignal being received.Press the MMEENNUUbutton and then use DD or EE buttonto select the SSEETTUUPPmenu.Press the GG button and then use DD or EE button toselect MMaannuuaall TTuunniinngg.Press the GG button and then use DD or EE button toselect TTVV, DDTTVV, CCAATTVV, and CCAADDTTVV.Press the GG button and then use DD or EE button toselect channel you want to add or delete.Press the EENNTTEERRbutton to add or delete the channel.Press the EEXXIITT button to return to TV viewing orpress MMEENNUU button to return to the previous menu.ENTERBACKCCMENU EXIT214365123 4 5Add/Delete Channel (Manual Tuning)Auto TuningManual Tuning GChannel EditSelect channel type and RF-channel number.DTV 2Auto TuningManual TuningChannel EditSelect channel type and RF-channel number.DTV GG12delete the channel.DTV 12-0DDEEBad Normal GoodAuto TuningManual TuningChannel Edit
WATCHING TV / CHANNEL CONTROL34WATCHING TV / CHANNEL CONTROLThere are two different ways in order to add or deletescanned channels. One is "Custom List" and the other is"Favorite List" in the channel list. Both of them are availableafter Auto Tuning on the SETUP menu. A Custom List can be created by toggling each channel onor off with ENTER button. The channels in the Custom Listare displayed in black, and the channels deleted from theCustom List are displayed in gray. Once a channel is high-lighted you can add or delete the channel by referring to thesmall window at the top-left corner of the screen.You can create your own Favorite List. Use the FFAAVVbuttonon the remote control when a channel is highlighted andthen add or delete the channel to/from your Favorite List.Press the MMEENNUUbutton and then use DD or EE buttonto select the SSEETTUUPPmenu.Press the GG button and then use DD or EE button toselect CChhaannnneell EEddiitt.Press the GG button and then use DD or EE button toselect channel and then use the EENNTTEERRbutton to addor delete it. Press FFAAVVbutton to add the channel to the Favorite List.The surfing icon will appear in back of that channelnumber.Press EEXXIITTbutton to return to TV viewing or pressMMEENNUUbutton to return to the previous menu.0-VOL CHENTERBACKMUTEADJUSTCCFAVMENU EXIT2134123 4Channel EditingAuto TuningManual TuningChannel EditAuto TuningManual TuningChannel Edit GTVDDEE2-04-06-09-011-013-014-0Add/DeleteFavoriteFAVAuto TuningManual TuningChannel Edit GDDEEGDDEETVAdd/DeleteFavorite2-04-06-09-011-013-014-0FAV
WATCHING TV / CHANNEL CONTROL35KEY LOCKENTERBACKCCMENU EXITThe TV can be set up so that it can only be used with theremote control. This feature can be used to prevent unauthorized viewingby locking out the front panel controls.This TV is programmed to remember which option it waslast set to even if you turn the TV off.Press the MMEENNUUbutton and then use DD or EE buttonto select the OOPPTTIIOONNmenu.Press the GG button and then use DD or EE button toselect KKeeyy lloocckk. Press the GG button and then use DD or EE button toselect OOnnor OOffff.Press EEXXIITTbutton to return to TV viewing or pressMMEENNUUbutton to return to the previous menu.234112 3Language : EnglishKey Lock : OffCaption : OffLanguageKey Lock GCaptionOffOn
PICTURE CONTROL36PICTURE SIZE (ASPECT RATIO) CONTROLPICTURE CONTROLENTERBACKCCMENU EXITThis feature allows an analog picture with a 4:3 aspect ratio is displayed on your TV.When you receive an analog picture with a 4:3 aspect ratio on your 16:9 TV, youneed to specify how the picture is to be displayed. ■ RGB-PC input source use 4:3 or 16:9 aspect ratio.NOTE!GGIf a fixed image is displayed on the screen for a long time, the image maybecome imprinted on the screen and remain visible.This phenomenon is common to all manufactures and in consequence themanufactures warranty does not cover the product bearing this phenomenon.Press the MMEENNUUbutton and then use DD or EE buttonto select the PPIICCTTUURREEmenu.Press the GG button and then use DD or EE button toselect AAssppeecctt RRaattiioo.Press the GG button and then use DD or EE button toselect the desired picture option ((SSeett BByy PPrrooggrraamm,44::33,1166::99,FFuullll,HHoorriizzoonn, or ZZoooomm)).Press EEXXIITTbutton to return to TV viewing or pressMMEENNUUbutton to return to the previous menu.2341132Picture ModeColor TemperatureDBAdvancedAspect Ratio GPicture ResetSet By Program4:316:9FullHorizonZoomPicture Mode : UserColor Temperature : CoolDBAdvancedAspect Ratio : 16:9 Picture Reset
PICTURE CONTROL37Set by programSelects the proper picture proportion to matchthe source’s image.4:3Choose 4:3 when you want to view a picturewith an original 4:3 aspect ratio.16:9Adjust the picture horizontally, in a linear pro-portion to fill the entire screen.HorizonThe screen size is, more enlarged at both sides,to create a spectacular view.ZoomChoose Zoom when you want to view the pic-ture without any alteration. However, the topand bottom portions of the picture will becropped.ZoomSet By ProgramSet By Program(4:3 4:3)(16:9 16:9)4:316 : 9Horizon
PICTURE CONTROL38PRESET PICTURE SETTINGSPICTURE CONTROL123456780-9VOL CHPOWERMUTEADJUSTSAPFAVPICTURE SOUNDTIMERTV INPUTPicture Mode - PresetPress the PPIICCTTUURREEbutton repeatedly to select the pictureappearance setup option as below :DDyynnaammiicc, SSttaannddaarrdd, MMiilldd, and UUsseerr (your own settings).Press the EEXXIITTbutton to save and return to TV viewing.Picture Mode adjusts the TV for the best picture appearance.Select the preset value in the Picture Mode menu based on theprogram category.DDyynnaammiicc,SSttaannddaarrdd,MMiillddSettings are preset for the optimumpicture quality at the factory and are not adjustable.In the UUsseerr mode only, user can directly adjust the contrast,brightness, color, sharpness, tint.■You can also use the PPIICCTTUURREEmenu to adjust PPiiccttuurree MMooddee.21Picture Mode : UserColor Temperature : CoolDBAdvancedAspect Ratio : 16:9 Picture ResetPicture ModeColor Temperature GDBAdvancedAspect RatioPicture ResetDynamicStandardMildUser
PICTURE CONTROL39VOL CHENTERBACKMUTECCMENU EXITColor Tone - PresetChoose one of three automatic color adjustments. Set towarm to enhance hotter colors such as red, or set to coolto see less intense colors with more blue.When selecting Picture Mode options (Dynamic, Standardand Mild), CCoolloorr TTeemmppeerraattuurreeis automatically change.When selecting Picture Mode options (User), you canchoose the CCoolloorr TTeemmppeerraattuurree.Press the MMEENNUUbutton and then use DD or EE buttonto select the PPIICCTTUURREEmenu.Press the GG button and then use DD or EE button toselect CCoolloorr TTeemmppeerraattuurree. Press the GG button and then use DD or EE button toselect either CCooooll,MMeeddiiuumm, WWaarrmm or UUsseerr.Press EEXXIITTbutton to return to TV viewing or pressMMEENNUUbutton to return to the previous menu.234112 3Picture ModeColor Temperature GDBAdvancedAspect RatioPicture ResetCoolMediumWarmUserPicture Mode : UserColor Temperature : CoolDBAdvancedAspect Ratio : 16:9 Picture Reset
PICTURE CONTROL40MANUAL PICTURE ADJUSTMENTPICTURE CONTROLVOL CHENTERBACKMUTECCMENU EXITPicture Mode - User ModeAdjust the picture appearance to suit your preference andviewing situations.Press the MMEENNUUbutton and then use DD or EE buttonto select the PPIICCTTUURREEmenu.Press the GG button and then use DD or EE button toselect PPiiccttuurree MMooddee.Press the GG button and then use DD or EE button toselect UUsseerr.Press the GG button and then use DD or EE button toselect the desired picture option ((BBaacckklliigghhtt,CCoonnttrraasstt,BBrriigghhttnneessss,CCoolloorr,SShhaarrppnneessss, or TTiinntt)).■BBaacckklliigghhttTo control the brightness of screen, adjust thebrightness of LCD panel. Press the GG button and then use FFor GGbutton tomake appropriate adjustments.Press EEXXIITTbutton to return to TV viewing or pressMMEENNUUbutton to return to the previous menu.234561Backlight 100EEPicture Mode : UserColor Temperature : CoolDBAdvancedAspect Ratio : 16:9 Picture ResetEEUserBacklight 100 GContrast 85Brightness 50Color 50Sharpness 50Tint 0 R GPress to confirm.MENUPicture ModeColor TemperatureDBAdvancedAspect RatioPicture ResetDynamicStandardMildUser GSelection ( Gor ) leads you to thedetailed setting screen.2 3145
PICTURE CONTROL41VOL CHENTERBACKMUTECCMENU EXITYou can also adjust the detailed settings (Red, Green, Blue)by selecting the CCoolloorr TTeemmppeerraattuurree--UUsseerrmenu.This feature operate only if the picture mode set UUsseerr.Color Tone - User ModePress the MMEENNUUbutton and then use DD or EE buttonto select the PPIICCTTUURREEmenu.Press the GG button and then use DD or EE button toselect CCoolloorr TTeemmppeerraattuurree. Press the GG button and then use DD or EE button toselect UUsseerr.Press the GG button and then use DD or EE button toselect RReedd, GGrreeeenn, or BBlluuee.Press the GG button and then use FF or GG button tomake appropriate adjustments.■The adjustment range of RReedd, GGrreeeenn, or BBlluueeis -20~+20.Press EEXXIITTbutton to return to TV viewing or pressMMEENNUUbutton to return to the previous menu.2345612 3145Picture ModeColor TemperatureDBAdvancedAspect RatioPicture ResetScreenPress to confirm.MENUCoolMediumWarmUser GUserRed 0 GGreen 0Blue 0Picture Mode : UserColor Temperature : CoolDBAdvancedAspect Ratio : 16:9 Picture ResetRed 0 FFGEESelection ( Gor ) leads you to thedetailed setting screen.EE
PICTURE CONTROL42DB - DIGITAL BOOSTERPICTURE CONTROLVOL CHENTERBACKMUTECCMENU EXITPress the MMEENNUUbutton and then use DD or EE buttonto select the PPIICCTTUURREEmenu.Press the GG button and then use DD or EE button toselect DDBB.Press the GG button and then use FF or GG button toselect AAuuttoo or MMaannuuaall.Press EEXXIITTbutton to return to TV viewing or pressMMEENNUUbutton to return to the previous menu.DB is LG Electronic’s unique picture improving technologyto display a real HD source through an advanced dig-italsignal processing algorithm.When selecting Picture Mode options (Dynamic, Standard,and Mild), DB is automatically changed to Auto.When selecting Picture Mode option (User), you canchoose the Auto / Manual.When selecting the Manual, you can adjust the DB Contrast,DB color and DB Noise.23412 31Picture Mode : UserColor Temperature : CoolDBAdvancedAspect Ratio : 16:9 Picture ResetPicture ModeColor Temperature DB GAdvancedAspect RatioPicture ResetManualDB Contrast OnDB Color OnDB Noise OnSSeelleeccttiinngg tthhee MMaannuuaall1. Press the EE button and then use DD or EE but-ton to select DDBB CCoonnttrraasstt, DDBB CCoolloorrorDDBB NNooiissee.■DDBB CCoonnttrraasstt:: Optimizing the contrastautomatically according to the brightness ofthe reflection. ■DDBB CCoolloorr::Adjusting the colors of thereflection automatically to reproduce asclosely as possible to the natural colors. ■DDBB NNooiissee :: Removing the noise up to thepoint where it does not damage the originalpicture.2. Use the DD or EE button to select OOnnor OOffff.
PICTURE CONTROL43ADVANCED - BLACK (DARKNESS) LEVELVOL CHENTERBACKMUTECCMENU EXITPress the MMEENNUUbutton and then use DD or EE buttonto select the PPIICCTTUURREEmenu.Press the GG button and then use DD or EE button toselect AAddvvaanncceedd. Press the GG button and then use DD or EE button toselect BBllaacckk lleevveell LLoowwor HHiigghh.■LLoowwThe screen gets darker. ■HHiigghhThe screen gets brighter. Press EEXXIITTbutton to return to TV viewing or pressMMEENNUUbutton to return to the previous menu.Adjusting the contrast and the brightness of the screenusing the black level of the screen. This feature operates only in AV1, AV2, HDMI1/DVI, orHDMI2 mode.23412 31Picture ModeColor TemperatureDB Advanced GAspect RatioPicture ResetBlack Level LowPicture Mode : UserColor TemperatureDBAdvanced : HighAspect Ratio : 16:9 Picture Reset
VOL CHENTERBACKMUTECCMENU EXITPICTURE CONTROL44PICTURE RESETPICTURE CONTROLPress the MMEENNUUbutton and then use DD or EE buttonto select the PPIICCTTUURREEmenu.Press the GG button and then use DD or EE button toselect PPiiccttuurree RReesseett. Press the GG button to reset the Picture menu optionsto original values.Use to quickly reset all the Picture menu options to theiroriginal factory preset values.2312 31Picture ModeColor TemperatureDB Advanced Aspect RatioPicture Reset GPicture Mode : UserColor Temperature : CoolDBAdvancedAspect Ratio : 16:9 Picture ResetSelection ( Gor ) resets to the factorysettings (default).
SOUND & LANGUAGE CONTROL45123456780-9VOL CHPOWERMUTEADJUSTSAPFAVPICTURE SOUNDTIMERTV INPUTPRESET SOUND SETTINGS (SOUND MODE)SOUND & LANGUAGE CONTROLSound Mode lets you enjoy the best sound without any specialadjustment because the TV sets the appropriate sound optionsbased on the program content.Standard, Music, News, Movie, and Sports are preset for goodsound quality at the factory and are not adjustable.Press the SSOOUUNNDDbutton repeatedly to select the appropri-ate sound setup as below : SSttaannddaarrdd, MMuussiicc, MMoovviiee, SSppoorrttss, and UUsseerr (your ownsettings).Press EEXXIITTbutton to return to TV viewing.■ You can also adjust SSoouunndd MMooddeein the AAUUDDIIOOmenu.21Sound Mode GBalanceStandardMusicMovieSportsUserSound Mode : StandardBalance : 0
SOUND & LANGUAGE CONTROL46SOUND &LANGUAGE CONTROLVOL CHENTERBACKMUTECCMENU EXITSOUND SETTING ADJUSTMENT - USER MODEPress the MMEENNUUbutton and then use DD or EE buttonto select the AAUUDDIIOOmenu.Press the GG button and then use DD or EE button toselect SSoouunndd MMooddee. Press the GG button and then use DD or EE button toselect UUsseerr.Press the GG button and then use DD or EE button toselect the desired sound option (TTrreebblleeor BBaassss).Press the GG button and then use FF or GG button tomake appropriate adjustments.Press EEXXIITTbutton to return to TV viewing or pressMMEENNUUbutton to return to the previous menu.Adjust the sound to suit your taste and room situations. 234561Sound Mode BalanceStandardMusicMovieSportsUser GUserTreble 50 GBass 50Press to confirm.MENU2 3451Sound Mode : StandardBalance : 0Treble 85 FF GEESelection ( Gor ) leads you to thedetailed setting screen.EE
SOUND & LANGUAGE CONTROL47BALANCEVOL CHENTERBACKMUTECCMENU EXITPress the MMEENNUUbutton and then use DD or EE buttonto select the AAUUDDIIOOmenu.Press the GG button and then use DD or EE button toselect BBaallaannccee. Press the GG button and then use FF or GG button tomake appropriate adjustments.Press EEXXIITTbutton to return to TV viewing or pressMMEENNUUbutton to return to the previous menu.Adjust the left/right sound of speaker to suit your taste androom situations.L RBalance 02341123Sound ModeBalance 0 L RSound Mode : StandardBalance : 0
SOUND & LANGUAGE CONTROL48STEREO/SAP BROADCASTS SETUPSOUND &LANGUAGE CONTROL123456780-9VOL CHPOWERMUTEADJUSTSAPFAVPICTURE SOUNDTIMERTV INPUTThis TV can receive MTS stereo programs and any SAP(Secondary Audio Program)that accompanies the stereo programif the station transmits an additional sound signal as well as theoriginal one and when you select Stereo or SAP on the remotecontrol.Mono sound is automatically received if the broadcast is only inMono; even though Stereo or SAP has been selected.Select Mono if you want to listen to the mono sound in remoteareas during stereo/SAP broadcasting. Stereo or SAP can be received in Analog channel.Use the SSAAPPbutton to select your desired MTS mode inanalog signal. Each time you press the SSAAPPbutton, MMoonnoo,SStteerreeoo, or SSAAPPappear in turn. ■If other languages available on the digital signal, selectthem with the SSAAPPbutton.Press EEXXIITTbutton to save and return to TV viewing.21
SOUND & LANGUAGE CONTROL49AUDIO LANGUAGE VOL CHENTERBACKMUTECCMENU EXITOther languages may be available if a digital signal isprovided by the broadcasting station. This feature operates only in DTV/CADTV mode.Press the MMEENNUUbutton and then use DD or EE buttonto select the OOPPTTIIOONNmenu.Press the GG button and then use DD or EE button toselect LLaanngguuaaggee. Press the GG button and then use DD or EE button toselect AAuuddiioo.Press the GG button and then use FF or GG button toselect EEnngglliisshh, SSppaanniisshh, or FFrreenncchh.Press EEXXIITTbutton to return to TV viewing or pressMMEENNUUbutton to return to the previous menu.234512 314Language : EnglishKey Lock : OffCaption : OffLanguage GKey LockCaptionLanguageKey LockCaptionMenu EnglishAudio FFEnglish GGMenu EnglishAudio English
SOUND & LANGUAGE CONTROL50ON-SCREEN MENUS LANGUAGE SELECTIONSOUND &LANGUAGE CONTROLVOL CHENTERBACKMUTECCMENU EXITThe menus can be shown on the screen in the selectedlanguage. First select your language.Press the MMEENNUU button and then use DD or EE buttonto select the OOPPTTIIOONN menu.Press the GG button and then use DD or EEbutton toselect LLaanngguuaaggee..Press the GG button and then use DD or EEbutton toselect MMeennuu..Press the GG button and then use FF or GG button toselect your desired language. From this point on, the on-screen menus will be shownin the selected language.Press the EEXXIITTbutton to return to TV viewing orpress MMEENNUU to return to the previous menu.123452 314Language : EnglishKey Lock : OffCaption : OffLanguage GKey LockCaptionLanguageKey LockCaptionMenu FFEnglish GGAudio EnglishMenu EnglishAudio English
SOUND & LANGUAGE CONTROL51CAPTION MODEVOL CHENTERBACKMUTECCMENU EXITCaption must be provided to help people with hearing losswatch TV.Language : EnglishKey Lock : OffCaption : OffLanguageKey LockCaptionMode FFOn GGAnalog Text1Digital Service3Digital OptionUse the CCCCbutton to select Caption OOnnor OOffff. ■ When selecting OOffff, Sub-menus for Analog, DTV, andDigital Option become disabled.Press EEXXIITTto save and return to TV viewing.21■ You can also adjust CCaappttiioonnin the OOPPTTIIOONNmenu.
SOUND & LANGUAGE CONTROL52SOUND &LANGUAGE CONTROLVOL CHENTERBACKMUTECCMENU EXITAnalog Broadcasting System CaptionsSelect a caption mode for displaying captioning information ifprovided on a program. Analog caption displays information atany position on the screen and is usually the program's dialog.Caption/Text, if provided by the broadcaster, would be availablefor both digital and analog channels on the Antenna/Cable.This TV is programmed to memoririze the caption/text modewhich was last set when you turn the power off.This function is only available when CCaappttiioonnMode is set OOnn.Press the MMEENNUU button and then use DD or EE buttonto select the OOPPTTIIOONN menu.Press the GG button and then use DD or EEbutton toselect CCaappttiioonn..Press the GG button and then use DD or EEbutton toselect AAnnaalloogg..Press the GG button and then use FF or GG button toselect CCCC11, CCCC22, CCCC33, CCCC44, TTeexxtt11, TTeexxtt22,TTeexxtt33or TTeexxtt44■CCAAPPTTIIOONNThe term for the words that scroll across the bottom ofthe TV screen; usually the audio portion of the programprovided for the hearing impaired. ■TTEEXXTTThe term for the words that appear in a large blackframe and almost cover the entire screen; usually mes-sages provided by the broadcaster.Press the EEXXIITTbutton to return to TV viewing orpress MMEENNUU to return to the previous menu.1234513 42Language : EnglishKey Lock : OffCaption : OffLanguageKey LockCaptionMode OnAnalog FFText1 GGDigital Service3Digital Option
SOUND & LANGUAGE CONTROL53VOL CHENTERBACKMUTECCMENU EXITPress the MMEENNUUbutton and then use DD or EE buttonto select the OOPPTTIIOONNmenu.Press the GG button and then use DD or EE button toselect CCaappttiioonn. Press the GG button and then use DD or EE button toselect DDiiggiittaall. Press the GG button and then use FF or GG button toselect SSeerrvviiccee11~SSeerrvviiccee66.Press EEXXIITTbutton to return to TV viewing or pressMMEENNUUbutton to return to the previous menu.Choose the language you want the DTV/CADTV Captionsto appear in.Other Languages can be chosen for digital sources only ifthey are included on the program.This function in only available when Caption Mode is setOn.23451Digital Broadcasting System Captions13 42Language : EnglishKey Lock : OffCaption : OffLanguageKey LockCaptionMode OnAnalog Text1Digital FFService3 GGDigital Option
VOL CHENTERBACKMUTECCMENU EXITSOUND & LANGUAGE CONTROL54SOUND &LANGUAGE CONTROLCaption OptionCustomize the DTV/CADTV captions that appear on yourscreen.This function in only available when Caption Mode is setOn.Press the MMEENNUUbutton and then use DD or EE buttonto select the OOPPTTIIOONNmenu.Press the GG button and then use DD or EE button toselect CCaappttiioonn. Press the GG button and then use DD or EE button toselect DDiiggiittaall OOppttiioonn. Press the GG button and then use FF or GG button toselect CCuussttoomm. Use DD or EE button to customize the SSttyyllee, FFoonntt,etc., to your preference. A preview icon is provided at the bottom of thescreen, use it to see the caption language.■SSiizzee: Set the word size.■FFoonntt: Select a typeface for the text.■TTeexxtt CCoolloorr: Choose a color for the text.■TTeexxtt OOppaacciittyy: Specify the opacity for the text color.■BBgg ((BBaacckkggrroouunndd))CCoolloorr: Select a background color.■BBgg ((BBaacckkggrroouunndd))OOppaacciittyy: Select the opacity for thebackground color.■EEddggee TTyyppee: Select an edge type.■ddggee CCoolloorr: Select a color for the edges.Press EEXXIITTbutton to return to TV viewing or pressMMEENNUUbutton to return to the previous menu.23456112 34 5Language : EnglishKey Lock : OffCaption : OffLanguageKey LockCaptionMode OnAnalog Text1Digital Service3Digital Option GSelection ( Gor ) leads youto the Caption Option Screen.LanguageKey LockCaptionMode OnAnalog Text1Digital Service3Digital Option GSelection ( Gor ) leads youto the Caption Option Screen.Style CustomSize A StandardFont Font 0Text Color WhiteText OpacitySolid Bg Color BlackBg Opacity SolidEdge Type NoneEdge Color Black
TIME SETTING55CLOCK SETTINGTIME SETTINGVOL CHENTERBACKMUTECCMENU EXITAuto Clock SetupThe time is set automatically from a digital channel signal. The digital channel signal includes information for thecurrent time provided by the broadcasting station.Set the clock manually if the current time is set incorrectlyby the auto clock function.Press the MMEENNUUbutton and then use DD or EE buttonto select the TTIIMMEEmenu.Press the GG button and then use DD or EE button toselect CClloocckk. Press the GG button and then use DD or EE button toselect AAuuttoo.Press the GG button and then use DD or EE button toselect your viewing area time zone: EEaasstteerrnn, CCeennttrraall,MMoouunnttaaiinn, PPaacciiffiicc, AAllaasskkaaor HHaawwaaiiii.Press the GG button and then use DD or EE button toselect AAuuttoo, OOffff, OOnn, depending on whether or notyour viewing area observes Daylight Saving time.Press EEXXIITTbutton to return to TV viewing or pressMMEENNUUbutton to return to the previous menu.23456113254Clock GOff TimeOn TimeSleep TimeAuto SleepTime Zone EasternAutoDaylightSavingClock : Oct 19, 2006, 03:44 AMOff Time : OffOn Time : OffSleep Time : OffAuto Sleep : OffYear - - - -Date - - / - -Time - - : - - - -AutoClock GOff TimeOn TimeSleep TimeAuto SleepAutoYear - - - -Date - - / - -Time - - : - - - -AutoTime Zone EasternDaylightSavingDDEEGDDEEG
TIME SETTING56TIME SETTINGVOL CHENTERBACKMUTECCMENU EXITManual Clock SetupPress the MMEENNUUbutton and then use DD or EE buttonto select the TTIIMMEEmenu.Press the GG button and then use DD or EE button toselect CClloocckk. Press the GG button and then use DD or EE button toselect MMaannuuaall.Press the GG button and then use FF or GG button toselect either the year, date, or time option. Onceselected, use the DD or EE button to set the year, date,and time options.Press EEXXIITTbutton to return to TV viewing or pressMMEENNUUbutton to return to the previous menu.If the current time setting is wrong, reset the clock manually.23451132Clock GOff TimeOn TimeSleep TimeAuto SleepClock : Oct 19, 2007, 03:44 AMOff Time : OffOn Time : OffSleep Time : OffAuto Sleep : OffYear - - - -Date - - / - -Time - - : - - - -ManualDDEEG
TIME SETTING57AUTO ON/OFF TIMER SETTINGVOL CHENTERBACKMUTECCMENU EXITPress the MMEENNUUbutton and then use DD or EE buttonto select the TTIIMMEEmenu.Press the GG button and then use DD or EE button toselect OOffff TTiimmee or OOnn TTiimmee. Press the GG button and then use DD or EE button toselect OOnn.■To cancel the OOnn//OOffffttiimmee function, select OOffff.Press the GG button and then use DD or EE button to setthe hour.Press the GG button and then use DD or EE button to setthe minutes.OOnnllyy OOnn ttiimmeerr Press the GG button and then use DD or EE button toselect the channel at turn-on.Press the GG button and then use DD or EE button to setthe sound level at turn-on.Press EEXXIITTbutton to return to TV viewing or pressMMEENNUUbutton to return to the previous menu.2345671The timer function operates only if the current time hasbeen set.The Off-Timer function overrides the On-Timer function ifthey are both set to the same time.The TV must be in standby mode for the On-Timer to work.If you do not press any button within 2 hours after the TVturns on with the On Timer function, the TV will automati-cally revert to standby mode.132 54 6ClockOff TimeOn Time GSleep TimeAuto SleepOffOnTime 6 : 30 AMCh. TV 2-0Vol 17Clock : Oct 19, 2007, 03:44 AMOff Time : OffOn Time : OffSleep Time : OffAuto Sleep : Off
TIME SETTING58TIME SETTINGSLEEP TIMER SETTING123456780-9VOL CHPOWERMUTEADJUSTSAPFAVPICTURE SOUNDTIMERTV INPUTPress the TTIIMMEERRbutton repeatedly to select the number ofminutes. First the OOffffoption appears on the screen, followedby the following sleep timer options : 10, 20, 30, 60, 90,120, 180, and 240 minutes.When the number of minutes you want is displayed on thescreen, press the EENNTTEERRbutton. The timer begins to countdown from the number of minutes selected.To check the remaining minutes before the TV turns off, pressthe TTIIMMEERRbutton once.To cancel the Sleep Timer, press the TTIIMMEERRbutton repeat-edly to select OOffff.The Sleep Timer turns the TV off at the preset time.Note that this setting is cleared when the TV is turned off.■ You can also set up the SSlleeeepp TTiimmeerrin the TTIIMMEEmenu.2341ClockOff TimeOn TimeSleep Time GAuto SleepOff10 min20 min30 min60 min90 min120 min180 min240 minClock : Oct 19, 2006, 03:44 AMOff Time : OffOn Time : OffSleep Time : OffAuto Sleep : Off
TIME SETTING59AUTO SHUT-OFF SETTINGVOL CHENTERBACKMUTECCMENU EXITIf set to on and there is no input signal, the TV turns offautomatically after 10 minutes.Press the MMEENNUUbutton and then use DD or EE buttonto select the TTIIMMEEmenu.Press the GG button and then use DD or EE button toselect AAuuttoo SSlleeeepp. Press the GG button and then use DD or EE button toselect OOnnor OOffff.Press EEXXIITTbutton to return to TV viewing or pressMMEENNUUbutton to return to the previous menu.2341132ClockOff TimeOn TimeSleep TimeAuto Sleep GOffOnTV will be automatically turned off, in case ofNo Signal for 10 minutes.Clock : Oct 19, 2007, 03:44 AMOff Time : OffOn Time : OffSleep Time : OffAuto Sleep : Off
PARENTAL CONTROL / RATING60PARENTAL CONTROL / RATINGSParental Control can be used to block specific channels, ratings and other viewing sources.The Parental Control Function (V-Chip) is used to block program viewing based on the ratingssent by the broadcasting station. The default setting is to allow all programs to be viewed.Viewing can be blocked by choosing the type of the program and the categories. It is also possi-ble to block all program viewing for a time period. To use this function, the following must bedone :1. Set ratings and categories to be blocked.2. Specify a password3. Enable the lockV-Chip rating and categoriesRating guidelines are provided by broadcasting stations. Most television programs and televisionmovies can be blocked by TV Rating and/or Individual Categories. Movies that have been shownat the theaters or direct-to-video movies use the Movie Rating System (MPAA)only.Ratings for Television programs including made-for-TV movies :■TV-G (General audience)■TV-PG (Parental guidance suggested)■TV-14 (Parents strongly cautioned)■TV-MA (Mature audience only)■TV-Y (All children)■TV-Y7 (Children 7 years older)SET PASSWORD & LOCK SYSTEMSet up blocking schemes to block specific channels, ratings, andexternal viewing sources.A password is required to gain access to this menu.Press the MMEENNUUbutton and then use the DD or EE buttonto select the LLOOCCKKmenu. Then, press the GG button.■Enter the password as requested.■The TV is set up with the initial password “0-0-0-0”.VOL CHENTERBACKMUTECCMENU EXITEnter Password1Enter Password****Setting up Your Password
PARENTAL CONTROL / RATING61After inputting the password, use the DD or EE buttonto choose SSeett ppaasssswwoorrdd.Press the GG button and then choose any 4 digits foryour new password.As soon as the 4 digits are entered, re-enter the same4 digits on the CCoonnffiirrmm.Then your changed password has been memorized.Press EEXXIITTto return to TV viewing or press MMEENNUUto return to the previous menu.Change the password by inputting a new password twice. Lock SystemSet Password GMovie RatingTV Rating-ChildrenTV Rating-GeneralNewConfirm231********12NOTE!GGIf you ever forget your password, key in ‘7’, ‘7’, ‘7’, ‘7’on the remote control.After inputting the password, use the DD or EE buttonto choose LLoocckk SSyysstteemm.Press the GG button and then use the DD or EE buttonto select OOnnor OOffff.■When you select OOnn, the Lock System is enable.Press EEXXIITTbutton to return to TV viewing or pressMMEENNUUbutton to return to the previous menu.Enables or disables the blocking scheme you set up previously.Lock System GSet PasswordMovie RatingTV Rating-ChildrenTV Rating-GeneralOffOn23112Set PasswordLock SystemLock System : OffSet PasswordMovie RatingTV Rating-ChildrenTV Rating-GeneralLock System : OffSet PasswordMovie RatingTV Rating-ChildrenTV Rating-General
PARENTAL CONTROL / RATING62PARENTAL CONTROL /RATINGSENTERBACKCCMENU EXITMOVIE & TV RATINGMovie Rating (MPAA)Blocks movies according to the movie ratings limits speci-fied, so children cannot view certain movies. You can setthe ratings limit by blocking out all the movies with theratings above a specified level. Keep in mind that themovie ratings limit only applies to movies shown on TV,not TV programs, such as soap operas.After inputting the password, use the DD or EE buttonto choose MMoovviiee RRaattiinngg.Press the GG button and then use the DD or EE buttonto select GG, PPGG, PPGG--1133, RR, NNCC--1177or XX.■G (General audience) ■PG (Parental guidance suggested)■PG-13 (Parents strongly cautioned) ■R (Restricted)■NC-17 (No one 17 and under admitted)■X (Adult only)■Blocking Off (Permits all programs) Press EEXXIITTbutton to return to TV viewing or pressMMEENNUUbutton to return to the previous menu.GGIf you set PG-13 : G and PG movies will be available,PG-13, R, NC-17 and X will be blocked.Lock SystemSet PasswordMovie Rating GTV Rating-ChildrenTV Rating-GeneralBlocking off : permits all programsGPGPG-13RNC-17XBlocking Off23112Lock System : OffSet PasswordMovie RatingTV Rating-ChildrenTV Rating-General
PARENTAL CONTROL / RATING63TV Rating ChildrenAfter inputting the password, use the DD or EE button tochoose TTVV RRaattiinngg--CChhiillddrreenn.Press the GG button and then use the DD or EE button toselect AAggee, or FFaannttaassyy VViioolleennccee.Press the GG button and then use the DD or EE button toselect block options.■Age(applies to TV-Y, TV-Y7) ■Fantasy Violence(applies to TV-Y7)Press EEXXIITTbutton to return to TV viewing or pressMMEENNUUbutton to return to the previous menu.Prevents children from watching certain children's TV pro-grams, according to the ratings limit set. The children ratingdoes not apply to other TV programs. Unless you block cer-tain TV programs intended for mature audiences in the TVRating - sub menu, your children can view those programs.TV Rating GeneralAfter inputting the password, use the DD or EE button tochoose TTVV RRaattiinngg--GGeenneerraall.Press the GG button and then use the DD or EE button toselect AAggee, DDiiaalloogguuee, LLaanngguuaaggee, SSeexxor VViioolleennccee.Press the GG button and then use the DD or EE button toselect block options.■Age(applies to TV-G,TV-PG,TV-14,TV-MA)■Dialogue-sexual dialogue (applies to TV-PG,TV-14)■Language-adult language (applies to TV-PG,TV-14,TV-MA)■Sex-sexual situations (applies to TV-PG,TV-14,TV-MA)■Violence (applies to TV-PG,TV-14,TV-MA)Press EEXXIITTbutton to return to TV viewing or pressMMEENNUUbutton to return to the previous menu.Based on the ratings, blocks certain TV programs that youand your family do not want to view.Lock SystemSet PasswordMovie RatingTV Rating-Children GTV Rating-GeneralAgeFantasy ViolenceLock SystemSet PasswordMovie RatingTV Rating-ChildrenTV Rating-General GAgeDialogueLanguageSexViolence2312311212Lock System : OffSet PasswordMovie RatingTV Rating-ChildrenTV Rating-GeneralLock System : OffSet PasswordMovie RatingTV Rating-ChildrenTV Rating-General
PARENTAL CONTROL / RATING64APPENDIXTROUBLESHOOTINGTThhee ooppeerraattiioonn ddooeess nnoott wwoorrkk nnoorrmmaallllyy..TThhee vviiddeeoo ffuunnccttiioonn ddooeess nnoott wwoorrkk..No picture &No soundNo or poor coloror poor picturePoor reception on some channelsLines or streaksin picturesHorizontal/vertical barsor picture shakingPicture appears slowly after switching onThe remote controldoesn’t workPower is suddenly turned off■Check to see if there is any object between the product and the remote controlcausing obstruction. Ensure you are pointing the remote control directly at the TV.■Ensure that the batteries are installed with correct polarity (+ to +, - to -).■Ensure that the correct remote operating mode is set: TV, VCR etc.■Install new batteries.■Is the sleep timer set?■Check the power control settings. Power interrupted.■No broadcast on station tuned with Auto off activated.■Check whether the product is turned on.■Try another channel. The problem may be with the broadcast.■Is the power cord inserted into wall power outlet?■Check your antenna direction and/or location.■Test the wall power outlet, plug another product’s power cord into the outletwhere the product’s power cord was plugged in.■This is normal, the image is muted during the product startup process. Pleasecontact your service center, if the picture has not appeared after five minutes.■Adjust Color in menu option.■Keep a sufficient distance between the product and the VCR.■Try another channel. The problem may be with the broadcast.■Are the video cables installed properly?■Activate any function to restore the brightness of the picture. ■Check for local interference such as an electrical appliance or power tool.■Station or cable product experiencing problems, tune to another station.■Station signal is weak, reorient antenna to receive weaker station.■Check for sources of possible interference.■Check antenna (Change the direction of the antenna).
APPENDIX65TThheerree iiss aa pprroobblleemm iinn PPCC mmooddee.. ((OOnnllyy PPCC mmooddee aapppplliieedd))■Adjust resolution, horizontal frequency, or vertical frequency.■Check the input source.■Work the Auto configure or adjust clock, phase, or H/V position. (Option)■Check the signal cable.■Reinstall the PC video card.The signal is out of rangeScreen color is unstableor single colorVertical bar or stripe on background &Horizontal Noise &Incorrect position■Press the VOL or VOLUME button.■Sound muted? Press MUTE button.■Try another channel. The problem may be with the broadcast.■Are the audio cables installed properly?■Adjust Balance in menu option.■A change in ambient humidity or temperature may result in an unusual noisewhen the product is turned on or off and does not indicate a fault with theproduct.Picture OK & No soundUnusual sound frominsidethe productNo output from one of the speakersTThhee aauuddiioo ffuunnccttiioonn ddooeess nnoott wwoorrkk..
APPENDIX66MAINTENANCEAPPENDIXEarly malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you canenjoy your new TV. Caution: Be sure to turn the power off and unplug the power cord before you begin any cleaning.Cleaning the ScreenHere’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarmwater and a little fabric softener or dish washing detergent. Wring the cloth until it’s almost dry, and thenuse it to wipe the screen.Make sure the excess water is off the screen, and then let it air-dry before you turn on your TV.Cleaning the Cabinet■To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth.■Please be sure not to use a wet cloth.Extended AbsenceGG If you expect to leave your TV dormant for a long time (such as a vacation), it’s a good idea to unplugthe power cord to protect against possible damage from lightning or power surges.CAUTION21
APPENDIX67PRODUCT SPECIFICATIONS■The specifications shown above may be changed without prior notice for quality improvement.19LS4D(19LS4D-UA)22LS4D(22LS4D-UA)MODELS18.0 x 15.6 x 6.8 inches456.8 x 396.6 x 172.0mm18.0 x 14.5 x 2.8 inches456.8 x 368.5 x 70.5 mm11.5 pounds / 5.2 kg10.1 pounds / 4.6 kg20.7 x 17.4 x 7.4 inches525.4 x 441.6 x 187.4 mm20.7 x 16.3 x 2.7 inches525.4 x 413.0 x 68.6 mm12.8 pounds / 5.8 kg11.5 pounds / 5.2 kgAC100-240V ~ 50/60HzNTSC-M, ATSC, 64 & 256 QAMVHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV 1-13575 ohm32 ~ 104°F (0 ~40°C)Less than 80%-4 ~ 140°F (-20 ~60°C)Less than 85%Dimensions(Width x Height x Depth)WeightPower requirementTelevision SystemProgram CoverageExternal Antenna ImpedanceEnvironment conditionIncluding standExcluding standincluding standexcluding standOperating TemperatureOperating HumidityStorage TemperatureStorage Humidity

Navigation menu