LG Electronics USA 32PC5DVCUG PLASMA TV/MONITOR User Manual SAC30708021 Edit1 en
LG Electronics USA PLASMA TV/MONITOR SAC30708021 Edit1 en
User manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 860880 |
| Application ID | tKMg6fB3zbiGI7gSEbIsfg== |
| Document Description | User manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 131.89kB (1648614 bits) |
| Date Submitted | 2007-10-29 00:00:00 |
| Date Available | 2007-10-29 00:00:00 |
| Creation Date | 2007-10-24 13:39:13 |
| Producing Software | Acrobat Distiller 4.0.5 for Macintosh |
| Document Lastmod | 2007-10-24 13:41:17 |
| Document Title | SAC30708021-Edit1-en |
| Document Creator | 3.3: LaserWriter 8 Z1-8.7.1 |
| Document Author: | sun |
PLASMA TV OWNER’S MANUAL 32PC5DVC Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the back cover and quote this information to your dealer when you require service. www.lgcommercial.com WARNING / CAUTION WARNING / CAUTION To prevent fire or shock hazards, do not expose this product to rain or moisture. TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING/CAUTION TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. NOTE TO CABLE/TV INSTALLER This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of the cable entry as practical. FCC NOTICE Class B digital device This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. CAUTION Do not attempt to modify this product in any way without written authorization from LG Electronics. Unauthorized modification could void the user’s authority to operate this product SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Important safety instructions shall be provided with each apparatus. This information shall be given in a separate booklet or sheet, or be located before any operating instructions in an instruction for installation for use and supplied with the apparatus. This information shall be given in a language acceptable to the country where the apparatus is intended to be used. The important safety instructions shall be entitled “Important Safety Instructions”. The following safety instructions shall be included where applicable, and, when used, shall be verbatim as follows. Additional safety information may be included by adding statements after the end of the following safety instruction list. At the manufacturer’s option, a picture or drawing that illustrates the intent of a specific safety instruction may be placed immediately adjacent to that safety instruction: Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong, The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Only use attachments/accessories specified by the manufacturer. Unplug this apparatus when unused for long periods of time. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers)that produce heat. 9 Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 10 Never touch this apparatus or antenna during a thunder or lighting storm. 11 Do not allow a impact shock or any objects to fall into the product, and do not drop onto the screen with something. 12 Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has exposed to rain or moisture, does not operate normally, or has been dropped. 13 CAUTION concerning the Power Cord : Most appliances recommend they be placed upon a dedicated circuit; that is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner's manual to be certain. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. 14 Outdoor use marking : WARNING - To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. 15 Wet Location Marking : Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on or over apparatus. 16 GROUNDING Ensure that you connect the earth ground wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes. Power Supply Short-circuit Breaker 17 DISCONNECTING DEVICE FROM MAINS Mains plug is the disconnecting device. The plug must remain readily operable. CONTENTS WARNING / CAUTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 PICTURE CONTROL SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Picture Size (Aspect Ratio) Control . . . . . . . . . . . . . . . . . . 32 Preset Picture Settings - Picture Mode - Preset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 - Color Tone - Preset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Manual Picture Adjustment - Picture Mode - User Mode . . . . . . . . . . . . . . . . . . . . . . . . 36 - Color Tone - User Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 XD (Picture Improvement Technology) . . . . . . . . . . . . . 38 Advanced - Black (Darkness) Level . . . . . . . . . . . . . . . . . . . 39 Image Sticking Minimization (ISM) Method . . . . . . 40 Low-Power Picture Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Picture Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 INTRODUCTION Feature of this TV ............................................. PREPARATION Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Front Panel Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Back Panel Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Stand Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Back Cover for Wire Arrangement . . . . . . . . . . . . . . . . . . . . . 10 Use Power Cord Holder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Desktop Pedestal Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Production Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Antenna or Cable Connection . . . . . . . . . . . . . . . . . . . . . . . . . . 12 EXTERNAL EQUIPMENT SETUP HD Receiver Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 DVD Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 VCR Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Headphone Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 PC Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 WATCHING TV / CHANNEL CONTROL Remote Control Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Turning On TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Channel Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Volume Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 On-Screen Menus Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Channel Search - Auto Scan (Auto Tuning) . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 - Add / Delete Channel (Manual Tuning) . . . . . . 29 - Channel Editing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Key Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 SOUND & LANGUAGE CONTROL Preset Sound Setting (Sound Mode) . . . . . . . . . . . . . . . . 43 Sound Setting Adjustment - User Mode . . . . . . . . . . . 44 Balance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Stereo/SAP Broadcasts Setup . . . . . . . . . . . . . . . . . . . . . . . . . . 46 Audio Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 On-Screen Menus Language Selection . . . . . . . . . . . . . 48 Caption Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 - Analog Broadcasting System Captions . . . . . . . 50 - Digital Broadcasting System Captions . . . . . . . . 51 - Caption Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 TIME SETTING Clock Setting - Auto Clock Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 - Manual Clock Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 Auto On/Off Time Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 Sleep Time Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 Auto Shut-off Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 PARENTAL CONTROL / RATINGS Set Password & Lock System . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 Movie & TV Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 APPENDIX Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 Product Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 INTRODUCTION FEATURE OF THIS TV LG's own special digital image generator, consisting of a full digital image processor, six different main picture quality factors. Manufactured under license from Dolby Laboratories. “Dolby “and the double-D symbol are trademarks of Dolby Laboratories. High-definition television. High-resolution digital television broadcast and playback system composed of roughly a million or more pixels, 16:9 aspect-ratio screens, and AC3 digital audio. A subset of digital television, HDTV formats include 1080i and 720p resolutions. HDMITM, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing." PREPARATION ACCESSORIES SO AD MU JU UT TIM ER TV FA SA ST PO ER UR CK IT AD MU BA JU TIM ER FA ST TE CC INPU VO MEN UN SO CH EX PICT TE CC BA NP VO UN PREPARATION Ensure that the following accessories are included with your product. If an accessory is missing, please contact the dealer where you purchased the product. User must use shielded signal interface cables (D-sub 15 pin cable) with ferrite cores to maintain standard compliance for the product. CH CK EX IT 1.5V 1.5V LCD TV EN TE Owner's Manual http://www.lgusa.com www.lg.ca Copyright© 2007 LGE, All Rights Reserved. Owner’s Manual Protection Cover (Refer to p.11) CD Manual Power Cord Holder (Refer to p.11) Option Extras Remote Control, Batteries Power Cord 4-Bolts for stand assembly (Refer to p.10) * Slightly wipe stained spot on the exterior only with the polishing cloth for the product exterior if there is stain or fingerprint on surface of the exterior. * Do not wipe roughly when removing stain. Please be cautions of that excessive pressure may cause scratch or discoloration. D-sub 15 pin Cable Polishing Cloth PREPARATION FRONT PANEL INFORMATION Here shown may be somewhat different from your TV. ■ NOTE: If your product has a protection tape attached, remove the tape. And then wipe the product with a cloth (If a polishing cloth is included with your product, use it). PREPARATION ■ Remote Control Sensor Power/Standby Indicator Illuminates red in standby mode. Illuminates green when the set is switched on. INPUT MENU VOL ENTER INPUT POWER Button INPUT Button CH MENU MENU Button ENTER ENTER Button VOL VOLUME (F,G)Buttons CH CHANNEL (E,D)Buttons BACK PANEL INFORMATION ■ Here shown may be somewhat different from your TV. PREPARATION RS-232C IN (CONTROL & SERVICE) COMPONENT IN RGB IN (PC) ANTENNA/CABLE IN HDMI/DVI IN AUDIO IN (RGB/DVI) HEADPHONE AV IN EXCLUSIVE SERVICE ANTENNA/CABLE IN Connect over-the air signals to this jack. Connect cable signals to this jack. AV IN (Audio/Video) Connect audio/video output from an external device to these jacks. RS-232C IN (CONTROL & SERVICE) PORT For service. HEADPHONE INPUT Plug the headphone into the headphone socket. RGB (PC) IN Connect the output from a PC. AUDIO (RGB/DVI) IN Connect the audio from a PC or DTV. HDMI/DVI IN Connect a HDMI signal to this jack. Or DVI (Video) signal to this jack with a HDMI to DVI cable. COMPONENT IN Connect a component video/audio device to these jacks. Power Cord Socket For operation with AC power. Caution: Never attempt to operate the TV on DC power. EXCLUSIVE SERVICE PREPARATION STAND INSTALLATION ■ Here shown may be somewhat different from your TV. PREPARATION Carefully place the product screen side down on a cushioned surface that will protect product and screen from damage. Assemble the product stand with the product as shown. Install the 4 bolts securely, in the back of the product in the holes provided. BACK COVER FOR WIRE ARRANGEMENT Arrange the cables as shown picture. 10 USE POWER CORD HOLDER ■ Here shown may be somewhat different from your TV. PREPARATION After connecting the power cord to the AC input terminal, remove the bolt at the hole on the back cover and fix the power cord at the rear side of the TV by using the bracket for fixing the power cord. DESKTOP PEDESTAL INSTALLATION For proper ventilation, allow a clearance of 4 inches on all four sides from the wall. 4 inches 4 inches CAUTION 4 inches 4 inches Ensure adequate ventilation by following the clearance recommendations. PROTECTION COVER When installing the wall-mounted unit, use the protection cover for desk-type stand installation. 11 PREPARATION ANTENNA OR CABLE CONNECTION 1. Antenna (Analog or Digital) PREPARATION Wall Antenna Socket or Outdoor Antenna without a Cable Box Connections. For optimum picture quality, adjust antenna direction if needed. Multi-family Dwellings/Apartments (Connect to wall antenna socket) Wall Antenna Socket ANTENNA/CABLE IN RF Coaxial Wire (75 ohm) Outdoor Antenna (VHF, UHF) Single-family Dwellings /Houses (Connect to wall jack for outdoor antenna) Copper Wire Be careful not to bend the bronze wire when connecting the antenna. 2. Cable ANTENNA/CABLE IN Cable TV Wall Jack RF Coaxial Wire (75 ohm) ANTENNA/CABLE IN UHF Signal Amplifier Antenna VHF To improve the picture quality in a poor signal area, please purchase a signal amplifier and install properly. If the antenna needs to be split for two TV’s, install a 2-Way Signal Splitter. ■ If the antenna is not installed properly, contact your dealer for assistance. ■ ■ ! NOTE 12 The TV will let you know when the analog, cable, and digital channel scans are complete. EXTERNAL EQUIPMENT SETUP ■ To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment. HD RECEIVER SETUP This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you do receive digital signals from a digital set-top box or other digital external device, refer to the figure as shown below. 1. How to connect Connect the video outputs (Y, PB, PR) of the digital set top box to the C O M P O N E N T I N ( Y , PB , PR ) jacks on the set. Match the jack colors (Y = green, PB = blue, and PR = red). COMPONENT IN GB IN PC) UDIO IN GB/DVI) HEADPHONE EXCLUSIVE SERVICE Connect the audio output of the digital set-top box to the C O M P O N E N T I N ( L , R ) jacks on the set. AV IN EXTERNAL EQUIPMENT SETUP When connecting Component cable 2. How to use ■ Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box. operation) ■ PB PR Select C o m p o n e n t input source by using the I N P U T button on the remote control. Y, CB/PB, CR/PR Signal Component HDMI 480i Yes No 480p Yes Yes 720p Yes Yes 1080i Yes Yes Resolution Horizontal Frequency(KHz) Vertical Frequency(Hz) 720x480i 15.73 15.73 59.94 60.00 720x480p 31.47 31.50 59.94 60.00 1280x720p 44.96 45.00 59.94 60.00 1920x1080i 33.72 33.75 59.94 60.00 13 EXTERNAL EQUIPMENT SETUP When connecting HDMI cable 1. How to connect EXTERNAL EQUIPMENT SETUP Connect the digital set-top box to H D M I / D V I I N jack on the set. No separated audio connection is necessary. HDMI supports both audio and video. 2. How to use ■ Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.) ■ Select H D M I input source by using the I N P U T button on the remote control. ! NOTE RS-232C IN (CONTROL & SERVICE) RGB IN (PC) ANTENNA/CABLE IN When connected, the TV will tell a connected device what resolution it supports and the resolution it prefers. If the device supports this Auto HDMI function, the player output resolution will be automatically set to 720p. If the device does not support Auto HDMI, you need to set the output resolution appropriately. HDMI/DVI-DTV mode 14 HDMI-DTV OUTPUT Resolution Horizontal Frequency(KHz) Vertical Frequency(Hz) 720x480p 31.47 31.47 59.94 60.00 1280x720p 44.96 45.00 59.94 60.00 1920x1080i 33.72 33.75 59.94 60.00 HDMI/DVI IN AUDIO IN (RGB/DVI) When connecting HDMI to DVI cable DVI-DTV OUTPUT EXTERNAL EQUIPMENT SETUP RS-232C IN (CONTROL & SERVICE) RGB IN (PC) COMPONENT IN ANTENNA/CABLE IN HDMI/DVI IN AUDIO IN (RGB/DVI) HEADPHONE AV IN EXCLUSIVE SERVICE 1. How to connect Connect the DVI output of the digital set-top box to the H D M I / D V I I N jack on the set. Connect the audio output of the digital set-top box to the A U D I O I N ( R G B / D V I) jack on the set. 2. How to use ■ Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.) ■ Select H D M I input source by using the I N P U T button on the remote control. 15 EXTERNAL EQUIPMENT SETUP DVD SETUP When connecting Component cable 1. How to connect EXTERNAL EQUIPMENT SETUP Connect the video outputs (Y, PB, PR) of the DVD to the C O M P O N E N T I N ( Y , PB , PR ) jacks on the set. Match the jack colors (Y = green, PB = blue, and PR = red). Connect the audio outputs of the DVD to the C O M P O N E N T I N ( L , R ) jacks on the set. COMPONENT IN GB IN (PC) AUDIO IN RGB/DVI) HEADPHONE AV IN EXCLUSIVE SERVICE 2. How to use ■ Turn on the DVD player, insert a DVD. ■ Select C o m p o n e n t input source by using the I N P U T button on the remote control. ■ Refer to the DVD player's manual for operating instructions. PB PR Component Input ports To get better picture quality, connect a DVD player to the component input ports as shown below. Component ports on the TV Video output ports on DVD player 16 PB PR PB PR B-Y R-Y Cb Cr Pb Pr When connecting HDMI cable 1. How to connect Connect the HDMI output of the DVD to the H D M I / D V I I N jack on the set. No separated audio connection is necessary. HDMI supports both audio and video. EXTERNAL EQUIPMENT SETUP HDMI-DVD OUTPUT 2. How to use ■ Select H D M I input source by using the I N P U T button on the remote control. ■ Refer to the DVD player's manual for operating instructions. ! NOTE When connected, the TV will tell a connected device what resolution it supports and the resolution it prefers. If the device supports this Auto HDMI function, the player output resolution will be automatically set to 720p. If the device does not support Auto HDMI, you need to set the output resolution appropriately. To get the best picture quality, adjust the output resolution of the DVD to 720p. RS-232C IN (CONTROL & SERVICE) RGB IN (PC) ANTENNA/CABLE IN HDMI/DVI IN AUDIO IN (RGB/DVI) 17 EXTERNAL EQUIPMENT SETUP VCR SETUP To avoid picture noise (interference), leave an adequate distance between the VCR and TV. ■ If the 4:3 picture format is used; the fixed images on the sides of the screen may remain visible on the screen. This phenomenon is common to all manufactures and in consequence the manufactures warranty does not cover the product bearing this phenomenon. ■ EXTERNAL EQUIPMENT SETUP When connecting with an antenna RS-232C IN (CONTROL & SERVICE) RGB IN (PC) ANTENNA/CABLE IN VIDEO S-VIDEO ANT OUT OUTPUT SWITCH ANT IN Wall Jack HDMI/DVI IN AUDIO IN (RGB/DVI) Antenna 1. How to connect Connect the RF antenna out socket of the VCR to the A N T E N N A / C A B L E I N socket on the set. Connect the antenna cable to the RF antenna in socket of the VCR. 2. How to use 18 ■ Set VCR output switch to 3 or 4 and then tune TV to the same channel number. ■ Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.) 1. How to connect V I D E O jacks between TV and Connect the A U D I O/V VCR. Match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red) COMPONENT IN B IN C) DIO IN B/DVI) HEADPHONE AV IN EXCLUSIVE SERVICE 2. How to use ■ Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.) ■ Select A V input source by using the I N P U T button on the remote control. ! NOTE ANT IN S-VIDEO ANT OUT OUTPUT SWITCH VIDEO EXTERNAL EQUIPMENT SETUP When connecting with a RCA cable If you have a mono VCR, connect the audio cable from the VCR to the A U D I O L / M O N O jack of the set. 19 EXTERNAL EQUIPMENT SETUP HEADPHONE SETUP You can listen to the sound through the headphone. 1. How to connect EXTERNAL EQUIPMENT SETUP 20 Plug the headphone into the headphone socket. To adjust the headphone volume, press the V O L + or - button. If you press the M U T E button, the sound from the headphone is switched off. COMPONENT IN HEADPHONE AV IN EXCLUSIVE SERVICE PC SETUP This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. When connecting D-sub 15pin cable 1. How to connect Connect the PC audio output to the A U D I O I N ( R G B / D V I) jack on the set. NTENNA/CABLE IN Turn on the PC and the TV. ■ Select R G B - P C input source by using the I N P U T button on the remote control. AUDIO IN (RGB/DVI) HDMI/DVI IN 2. How to use ■ RGB IN (PC) RGB OUTPUT When connecting HDMI to DVI cable EXTERNAL EQUIPMENT SETUP Connect the RGB output of the PC to the R G B I N ( P C) jack on the set. RS-232C IN (CONTROL & SERVICE) AUDIO 1. How to connect Connect the DVI output of the PC to the H D M I / D V I I N jack on the set. Connect the PC audio output to the A U D I O I N ( R G B / D V I) jack on the set. DVI-PC OUTPUT 2. How to use ■ Turn on the PC and the TV. ■ Select H D M I input source by using the I N P U T button on the remote control. AUDIO AUDIO RS-232C IN (CONTROL & SERVICE) RGB IN (PC) NA/CABLE IN HDMI/DVI IN AUDIO IN (RGB/DVI) HEAD 21 EXTERNAL EQUIPMENT SETUP ! NOTES EXTERNAL EQUIPMENT SETUP To get the the best picture quality, adjust the PC graphics card to 852x480. Depending on the graphics card, DOS mode may not work if a HDMI to DVI Cable is in use. If the video doesn’t fit the screen, try pressing the ADJUST button to adjust the screen position of TV. Check the image on your TV. There may be noise associated with the resolution, vertical pattern, contrast or brightness in PC mode. If noise is present, change the PC output to another resolution, change the refresh rate to another rate or Supported Display Specifications RGB-PC, HDMI/DVI-PC mode 22 Resolution Horizontal Frequency(KHz) Vertical Frequency(Hz) 640x350 31.47 70.09 720x400 31.468 70.08 640x480 31.469 59.94 848x480 29.83 59.659 852x480 32.0 60.491 800x600 37.879 60.31 1024x768 48.363 60.00 adjust the brightness and contrast on the PICTURE menu until the picture is clear. If the refresh rate of the PC graphic card can not be changed, change the PC graphic card or consult the manufacturer of the PC graphic card. Avoid keeping a fixed image on the screen for a long period of time. The fixed image may become permanently imprinted on the screen. The synchronization input form for Horizontal and Vertical frequencies is separate. Screen Setup for PC mode FAV ADJUST Overview MUTE VOL MENU Auto Config. 640 x 480 Resolution 848 x 480 Position 852 x 480 EXIT BACK Size Phase Reset Adjustment for screen Resolution, Position, Size, and Phase Press the A D J U S T button and then use D or E button to select R e s o l u t i o n, P o s i t i o n, S i z e, or P h a s e. Press the ENTER button and then use D E make appropriate adjustments. ■ The P h a s e adjustment range is 0 ~ + 6 3. ■ The S i z e adjustment range is - 3 0 ~ + 3 0. Press the ENTER button. F G button to ADJUST Prev OK Select Auto Config. This function is to adjust picture position and minimizes image shaking automatically. Resolution This function allows you select resolution of XGA/WXGA. Position This function is to adjust picture to left/right and up/down as you prefer. Size This function is to minimize any vertical bars or stripes visible on the screen background. And the horizontal screen size will also change. Phase This function allows you to remove any horizontal noise and clear or sharpen the image of characters. Reset This function is to initialize the adjusted value. EXTERNAL EQUIPMENT SETUP When the RGB input of the set is connected to a PC output, select the RGB-PC as the main input mode. After connecting RGB-PC to PC output and checking the screen quality. When you change the resolution, select the proper resolution in present input to see the best picture appearance. CH CC Auto Config. Auto Configuration and Initializing (Reset to original factory values) Resolution Position Size Start Auto configuration Phase Press the A D J U S T button and then use D or E button to select A u t o . C o n f i g . or R e s e t. Press the ENTER button and then use F or G button to select Y e s. Yes ADJUST Prev F G OK Select Auto Config. Resolution Position Initialize Settings Size No Reset Press the ENTER button. Phase Yes No Reset ADJUST Prev F G OK Select 23 WATCHING TV / CHANNEL CONTROL REMOTE CONTROL FUNCTIONS When using the remote control, aim it at the remote control sensor on the TV. SAP Analog mode: Selects MTS sound (Mono, Stereo, or a SAP) G p.50 DTV mode: Changes the audio language. POWER INPUT TV PICTURE SAP SOUND TIMER PICTURE Selects the factory preset picture depend on the viewing environment. G p.34 WATCHING TV / CHANNEL CONTROL SOUND Selects the factory preset sound for type of program. G p.43 TIMER Select the amount of time before your TV turns off automatically. G p.56 VOLUME UP Increase/decrease the sound level. /DOWN ADJUST Adjust the screen Auto config., Resolution, Position, Size Phase and Reset. G p.23 FAV ADJUST VOL MUTE Switch the sound on or off. G p.26 CC Select a closed caption. G p.49 MUTE CC MENU BACK CHANNEL Select available channels. UP/DOWN MENU Displays the main menu. ENTER BACK Tune to the last channel viewed. Return to the previous menu. EXIT Clear all on-screen displays and return to TV viewing from any menu. THUMBSTICK Navigate the on-screen menus and adjust the system set(Up/Down/Left tings to your preference. Right/ENTER) 24 CH EXIT POWER Turns your TV on or off. TV In AV, Component, RGB-PC, and HDMI input sources, screen returns to the last TV channel. INPUT External input modes rotate in regular sequence: TV, AV, Component, RGB-PC, and HDMI. (AV, Component, RGB-PC, and HDMI input sources are linked automatically, only if a device is connected.) — (DASH) Used to enter a program number for multiple program channels such as 2-1, 2-2, etc. FAV Scroll through the programmed Favorite channels. G p.30 Installing Batteries WATCHING TV / CHANNEL CONTROL NUMBER button Remote control effective range POWER INPUT TV SAP PICTURE ■ ■ ■ Open the battery compartment cover on the back side and install the batteries matching correct polarity (+ with +, - with -). Install two 1.5V AAA batteries. Don’t mix old or used batteries with new ones. Close cover. SOUND TIMER FAV ■ Use a remote control up to 7 meters distance and 30 degree (left/right) within the receiving unit scope. ■ Dispose of used batteries in a recycle bin to preserve environment. 25 WATCHING TV / CHANNEL CONTROL TURNING ON TV POWER TV First, connect power cord correctly. At this moment, the TV switches to standby mode. ■ In standby mode to turn TV on, press the , INPUT, C H (D or E) button on the TV or press the POWER, INPUT, T V, CH (+ or -)), Number (0~9 9 ) button on the remote control. WATCHING TV / CHANNEL CONTROL Select the viewing source by using the INPUT button on the remote control. ■ This TV is programmed to remember which power state it was last set to, even if the power cord is out. INPUT PICTURE SOUND SAP TIMER FAV ADJUST VOL MUTE CH CC MENU BACK EXIT When finished using the TV, press the POWER button on the remote control. The TV reverts to standby mode. ! NOTE If you intend to be away on vacation, disconnect the power plug from the wall power outlet. CHANNEL SELECTION Press the C H (+ or -)) or NUMBER buttons to select a channel number. FAV ADJUST VOL MUTE CH CC VOLUME ADJUSTMENT Adjust the volume to suit your personal preference. Press the V O L (+ or -)) button to adjust the volume. If you want to switch the sound off, press the M U T E button. 26 You can cancel the Mute function by pressing the M U T E or VOL (+ or -)) button. MUTE CH CC MENU FAV ADJUST VOL BACK EXIT ON-SCREEN MENUS SELECTION Your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual. Press the M E N U button and then use D or E button to select the each menu. Press the G button and then use D E F G PICTURE Auto Tuning Picture Mode : User Manual Tuning Color Temperature : Cool Channel Edit XD Advanced Aspect Ratio : 16:9 Picture Reset LOCK For Canada For USA Lock System : Off Lock System AUDIO : Off Set Password Set Password Movie Rating TV Rating-English TV Rating-Children TV Rating-French TV Rating-General Downloadable Rating Sound Mode : Standard Balance :0 WATCHING TV / CHANNEL CONTROL SETUP button to display the available menus. Downloadable Rating TIME OPTION Language : English Clock : - - - -, - - - -, - - : - - - - Key Lock : Off Off Time : Off Caption : Off On Time : Off ISM Method : Off Sleep Time : Off Low Power : Off Auto Sleep : Off 27 WATCHING TV / CHANNEL CONTROL CC CHANNEL SEARCH MENU BACK EXIT Auto Scan (Auto Tuning) ENTER WATCHING TV / CHANNEL CONTROL Automatically finds all channels available through antenna or cable inputs, and stores them in memory on the channel list. Run Auto Tuning again after any Antenna/Cable connection changes. A password is required to gain access to Auto Tuning menu if the Lock System is turned on. Auto Tuning Press the M E N U button and then use D or E button to select the S E T U P menu. Press the G button and then use D or E button to select A u t o T u n i n g. Manual Tuning Channel Edit Press the E N T E R button to begin the channel search. Allow A u t o T u n i n g to complete the channel search cycle for A N T E N N A and C A B L E. Auto Tuning Manual Tuning Selection ( G or leads you to the Auto Tuning screen. Channel Edit Auto Tuning Manual Tuning Selection ( G or Auto Tuning... leads you Processing to the Auto Tuning screen. Channel Edit DTV Ch. 23 Found Channel(s) : 16 Press to stop the current scan and start TV channel scan. Next BACK Prev 28 CC MENU EXIT BACK Add/Delete Channel (Manual Tuning) ENTER A password is required to gain access to Manual Tuning menu if the Lock System is turned on. If selecting DTV or CADTV input signal, you can view the on-screen signal strength monitor to see the quality of the signal being received. Press the G button and then use select M a n u a l T u n i n g. or or button Manual Tuning Channel Edit button to Press the G button and then use D or select T V, D T V, C A T V, and C A D T V. button to Auto Tuning Manual Tuning Channel Edit Select channel type and RF-Channel number DTV Press the G button and then use D or E button to select channel you want to add or delete. Press the E N T E R button to add or delete the channel. Press the E X I T button to return to TV viewing or press the B A C K button to return to the previous menu. WATCHING TV / CHANNEL CONTROL Auto Tuning Press the M E N U button and then use to select the S E T U P menu. Auto Tuning Manual Tuning Channel Edit Select channel type and RF-Channel number DTV 12 DTV 12-0 Bad Press Normal Good to delete the channel. 29 WATCHING TV / CHANNEL CONTROL FAV ADJUST Channel Editing MUTE VOL CH CC WATCHING TV / CHANNEL CONTROL There are two different ways in order to add or delete scanned channels. One is "Custom List" and the other is "Favorite List" in the channel list. Both of them are available after Auto Tuning on the SETUP menu. A Custom List can be created by toggling each channel on or off with ENTER button. You can create your own Favorite List. Use the F A V button on the remote control when a channel is highlighted and then add or delete the channel to/from your Favorite List. MENU BACK EXIT ENTER Auto Tuning Manual Tuning Channel Edit Press the M E N U button and then use to select the SETUP menu. or Press the G button and then use select C h a n n e l E d i t. or button to button Auto Tuning TV Manual Tuning Press the G button and then use D or select T V, D T V, C A T V, and C A D T V. button to Channel Edit 2-0 4-0 6-0 9-0 11-0 13-0 14-0 Press the G button and then use D or E button to select channel and then use the ENTER button to add or delete it. Press FAV button to add the channel to the Favorite List. The surfing icon will appear in back of that channel number. FAV Favorite Add/Delete Auto Tuning TV Manual Tuning 2-0 Channel Edit 4-0 6-0 9-0 11-0 Press the E X I T button to return to TV viewing or press the B A C K button to return to the previous menu. 13-0 14-0 FAV Favorite Add/Delete 30 CC KEY LOCK MENU BACK The TV can be set up so that it can only be used with the remote control. This feature can be used to prevent unauthorized viewing by locking out the front panel controls. This TV is programmed to remember which option it was last set to even if you turn the TV off. ENTER Press the G button and then use select K e y L o c k. or or button : English Key Lock : Off Caption : Off ISM Method : Off Low Power : Off button to Press the G button and then use select O n or O f f. or button to Language Key Lock Caption WATCHING TV / CHANNEL CONTROL Language Press the M E N U button and then use to select the O P T I O N menu. EXIT Off On ISM Method Press the E X I T button to return to TV viewing or press the B A C K button to return to the previous menu. Low Power 31 PICTURE CONTROL PICTURE SIZE (ASPECT RATIO) CONTROL CC MENU This feature allows an analog picture with a 4:3 aspect ratio is displayed on your TV. When you receive an analog picture with a 4:3 aspect ratio on your 16:9 TV, you need to specify how the picture is to be displayed. ■ RGB-PC input source use 4:3 or 16:9 aspect ratio. BACK EXIT ENTER ! NOTE PICTURE CONTROL If a fixed image is displayed on the screen for a long time, the image may become imprinted on the screen and remain visible. This phenomenon is common to all manufactures and in consequence the manufactures warranty does not cover the product bearing this phenomenon. Press the M E N U button and then use to select the P I C T U R E menu. or button Picture Mode : User Color Temperature : Cool XD Advanced Aspect Ratio : 16:9 Picture Reset Press the G button and then use select A s p e c t R a t i o. or button to Press the G button and then use D or E button to select the desired picture option ( S e t B y P r o g r a m, 4 : 3, 1 6 : 9, H o r i z o n, or Z o o m) . Picture Mode Color Temperature XD Set By Program Advanced Aspect Ratio Press the E X I T button to return to TV viewing or press the B A C K button to return to the previous menu. Picture Reset 4:3 16:9 Horizon Zoom 32 Set by program Horizon Selects the proper picture proportion to match the source’s image. The screen size is, more enlarged at both sides, to create a spectacular view. (4:3 16:9) Zoom Choose Zoom when you want to view the picture without any alteration. However, the top and bottom portions of the picture will be cropped. PICTURE CONTROL (16:9 4:3) 4:3 Choose 4:3 when you want to view a picture with an original 4:3 aspect ratio. 16:9 Adjust the picture horizontally, in a linear proportion to fill the entire screen. 33 PICTURE CONTROL PRESET PICTURE SETTINGS POWER TV Picture Mode - Preset Picture Mode adjusts the TV for the best picture appearance. Select the preset value in the Picture Mode menu based on the program category. D y n a m i c, S t a n d a r d, M i l d Settings are preset for the optimum picture quality at the factory and are not adjustable. In the U s e r mode only, user can directly adjust the contrast, brightness, color, sharpness, tint. INPUT PICTURE SOUND SAP FAV ADJUST VOL PICTURE CONTROL ■ Press the E X I T button to save and return to TV viewing. You can also use the PICTURE menu to adjust P i c t u r e M o d e. Picture Mode : User Picture Mode Color Temperature : Cool Color Temperature Standard XD XD Mild Advanced Advanced User Picture Reset 34 MUTE Press the P I C T U R E button repeatedly to select the picture appearance setup option as below : D y n a m i c, S t a n d a r d, M i l d, and U s e r (your own settings). Aspect Ratio : 16:9 TIMER Aspect Ratio Picture Reset Dynamic CH VOL MUTE CH CC MENU BACK EXIT Color Tone - Preset Choose one of three automatic color adjustments. Set to warm to enhance hotter colors such as red, or set to cool to see less intense colors with more blue. When selecting Picture Mode options (Dynamic, Standard and Mild), C o l o r T e m p e r a t u r e is automatically change. When selecting Picture Mode options (User), you can choose the C o l o r T e m p e r a t u r e. or button Picture Mode : User Color Temperature : Cool PICTURE CONTROL Press the M E N U button and then use to select the P I C T U R E menu. ENTER XD Advanced Aspect Ratio : 16:9 Picture Reset Press the G button and then use select C o l o r T e m p e r a t u r e. or button to Press the G button and then use D or E button to select either C o o l, M e d i u m, W a r m or U s e r. Press the E X I T button to return to TV viewing or press the B A C K button to return to the previous menu. Picture Mode Color Temperature G Cool XD Medium Advanced Warm Aspect Ratio User Picture Reset 35 PICTURE CONTROL MANUAL PICTURE ADJUSTMENT MUTE VOL CH CC MENU BACK EXIT Picture Mode - User Mode Adjust the picture appearance to suit your preference and viewing situations. PICTURE CONTROL Press the M E N U button and then use to select the P I C T U R E menu. or button ENTER Picture Mode : User Color Temperature : Cool XD Advanced Aspect Ratio : 16:9 Picture Reset Press the G button and then use select P i c t u r e M o d e. or button to Press the G button and then use select U s e r. or button to Picture Mode Dynamic Color Temperature Standard XD Mild Advanced User Aspect Ratio Press the G button and then use D or E button to select the desired picture option ( C o n t r a s t , B r i g h t n e s s, C o l o r, S h a r p n e s s, or T i n t) . Picture Reset Selection ( G or leads you to the detailed setting screen. Press the G button and then use make appropriate adjustments. or button to Press the E X I T button to return to TV viewing or press the B A C K button to return to the previous menu. User Contrast 85 Brightness 50 Color 50 Sharpness 50 Tint Press BACK to confirm. Contrast 85 36 MUTE VOL CH CC MENU BACK EXIT Color Tone - User Mode You can also adjust the detailed settings (Red, Green, Blue) by selecting the C o l o r T e m p e r a t u r e - U s e r menu. This feature operate only if the picture mode set U s e r. or button Picture Mode : User Color Temperature : Cool PICTURE CONTROL Press the M E N U button and then use to select the P I C T U R E menu. ENTER XD Advanced Aspect Ratio : 16:9 Picture Reset Press the G button and then use select C o l o r T e m p e r a t u r e. or button to Press the G button and then use select U s e r. Press the G button and then use select R e d, G r e e n, or B l u e. Press the G button and then use make appropriate adjustments. ■ or or button to button to Picture Mode Color Temperature Cool XD Medium Advanced Warm Aspect Ratio User Picture Reset Selection ( G or leads you to the detailed setting screen. or button to The adjustment range of R e d, G r e e n, or B l u e is 20~ +20. Press the E X I T button to return to TV viewing or press the B A C K button to return to the previous menu. User Red Green Blue Press BACK to confirm. Red 0 F 37 PICTURE CONTROL XD - PICTURE IMPROVEMENT TECHNOLOGY VOL MENU PICTURE CONTROL or button CH CC XD is LG’s unique picture improving technology to display a real HD source through an advanced digital signal processing algorithm. When selecting Picture Mode options (Dynamic, Standard, and Mild), XD is automatically changed to Auto. When selecting Picture Mode option (User), you can choose the Auto / Manual. When selecting the Manual, you can adjust the XD Contrast, XD Color and XD Noise. Press the M E N U button and then use to select the P I C T U R E menu. MUTE BACK EXIT ENTER Picture Mode : User Color Temperature : Cool XD Advanced Aspect Ratio : 16:9 Picture Reset Press the G button and then use select X D. Press the G button and then use select A u t o or M a n u a l. or or button to button to Picture Mode Color Temperature Selecting the Manual 1. Press the G button and then use F or G button to select X D C o n t r a s t, X D C o l o r or X D N o i s e. ■ XD C o n t r a s t : Optimizing the contrast automatically according to the brightness of the reflection. ■ X D C o l o r : Adjusting the colors of the reflection automatically to reproduce as closely as possible to the natural colors. ■ X D N o i s e : Removing the noise up to the point where it does not damage the original picture. 2. Use the D or E button to select O n or O f f. 38 Press the E X I T button to return to TV viewing or press the B A C K button to return to the previous menu. XD Manual Advanced Aspect Ratio XD Contrast On Picture Reset XD Color On XD Noise On ADVANCED - BLACK (DARKNESS) LEVEL VOL MUTE CH CC MENU BACK EXIT Adjusting the contrast and the brightness of the screen using the black level of the screen. This feature operates only in AV or HDMI mode. ENTER Press the M E N U button and then use to select the P I C T U R E menu. or button Picture Mode : User Color Temperature : Cool PICTURE CONTROL XD Advanced Aspect Ratio : 16:9 Picture Reset Press the G button and then use select A d v a n c e d. Press the G button and then use select B l a c k l e v e l L o w or H i g h. or or button to button to Picture Mode Color Temperature Low The screen gets darker. ■ High The screen gets brighter. ■ Press the E X I T button to return to TV viewing or press the B A C K button to return to the previous menu. XD Advanced Black Level Low Aspect Ratio Picture Reset 39 PICTURE CONTROL IMAGE STICKING MINIMIZATION (ISM) METHOD VOL MUTE MENU BACK CH CC A frozen still picture from a PC/video game displayed on the screen for prolonged periods will result in a ghost image. Use our unique method to minimize any fixed image on the screen. EXIT ENTER Press the M E N U button and then use to select the O P T I O N menu. or Press the G button and then use select I S M M e t h o d. or button to button PICTURE CONTROL Language Press the G button and then use D or E button to select either N o r m a l, O r b i t e r, I n v e r s i o n, or W h i t e W a s h. Normal If image sticking is never a problem, ISM is not necessary - set to Normal. ■ Orbiter Orbiter may help prevent ghost images. However, it is best not to allow any fixed image to remain on the screen. To avoid a ghost image on the screen, the image will move once per 2 minutes: Left Right Upside Downside Right Left Downside Upside. ■ Inversion Inversion will automatically invert the plasma display panel color every 30 minutes. ■ White Wash White Wash removes ghost images from the screen. Use sparingly. Watch the TV normally for a while before using this feature to see if the ghost image disappears on its own. : Off Caption : Off ISM Method : Off Low Power : Off ■ ! NOTE 40 : English Key Lock An excessive ghosted image may be impossible to clear entirely with White Wash. To return to normal viewing, press the any button. Press E X I T button to return to TV viewing or press M E N U button to return to the previous menu. Language Input Label SimpLink Key Lock Caption ISM Method Normal Low Power Orbiter Set ID Inversion White Wash LOW - POWER PICTURE MODE MUTE VOL CH CC MENU BACK EXIT Low power reduces the display power consumption. ENTER Press the G button and then use select L o w P o w e r. or or button PICTURE CONTROL Language Press the M E N U button and then use to select the O P T I O N menu. : English Key Lock : Off Caption : Off ISM Method : Off Low Power : Off button to Press the G button and then use select O n or O f f. or button to Language Key Lock Caption ■ When you select O n, the screen darkens. ISM Method Low Power Off On Press the E X I T button to return to TV viewing or press the B A C K button to return to the previous menu. 41 PICTURE CONTROL PICTURE RESET MUTE VOL CH CC MENU BACK EXIT Use to quickly reset all the Picture menu options to their original factory preset values. ENTER PICTURE CONTROL Press the M E N U button and then use to select the P I C T U R E menu. Press the G button and then use select Picture Reset. or button Picture Mode : User Color Temperature : Cool XD Advanced or button to Aspect Ratio : 16:9 Back Light : 100 Picture Reset Press the G button to reset the Picture menu options to original values. Picture Mode Color Temperature XD Advanced Aspect Ratio Back Light Picture Reset Selection ( G or resets to the factory setting (defaults). 42 SOUND & LANGUAGE CONTROL PRESET SOUND SETTINGS (SOUND MODE) POWER TV Sound Mode lets you enjoy the best sound without any special adjustment because the TV sets the appropriate sound options based on the program content. Standard, Music, Movie, and Sports are preset for good sound quality at the factory and are not adjustable. INPUT PICTURE SOUND SAP TIMER FAV ADJUST VOL ■ Press the S O U N D button repeatedly to select the appropriate sound setup as below : S t a n d a r d, M u s i c, M o v i e, S p o r t s, and U s e r (your own settings). Press the E X I T button to save and return to TV viewing. You can also adjust S o u n d M o d e in the AUDIO menu. Sound Mode : Standard Sound Mode Balance :0 Balance Standard CH SOUND & LANGUAGE CONTROL MUTE Music Movie Sports User 43 SOUND & LANGUAGE CONTROL SOUND SETTING ADJUSTMENT - USER MODE MUTE VOL CH CC MENU BACK EXIT Adjust the sound to suit your taste and room situations. ENTER SOUND & LANGUAGE CONTROL Press the M E N U button and then use to select the A U D I O menu. or Press the G button and then use select S o u n d M o d e. or button to Press the G button and then use select U s e r. or Sound Mode : Standard Balance :0 button Sound Mode Standard Balance Music Movie button to Sports User Selection ( G or leads you to the detailed setting screen. Press the G button and then use D or E button to T r e b l e or B a s s). select the desired sound option (T User Press the G button and then use make appropriate adjustments. or button to Press the E X I T button to return to TV viewing or press the B A C K button to return to the previous menu. Treble 50 Bass 50 Press BACK to confirm. Treble 85 F 44 BALANCE VOL MUTE CH CC MENU BACK EXIT Adjust the left/right sound of speaker to suit your taste and room situations. ENTER or Press the G button and then use select B a l a n c e. or button to button Sound Mode : Standard Balance :0 Press the G button and then use make appropriate adjustments. or button to Sound Mode Balance Press the E X I T button to return to TV viewing or press the B A C K button to return to the previous menu. SOUND & LANGUAGE CONTROL Press the M E N U button and then use to select the A U D I O menu. Balance 45 SOUND & LANGUAGE CONTROL STEREO/SAP BROADCASTS SETUP POWER TV This TV can receive MTS stereo programs and any SAP (Secondary Audio Program) that accompanies the stereo program if the station transmits an additional sound signal as well as the original one and when you select Stereo or SAP on the remote control. Mono sound is automatically received if the broadcast is only in Mono; even though Stereo or SAP has been selected. Select Mono if you want to listen to the mono sound in remote areas during stereo/SAP broadcasting. Stereo or SAP can be received in Analog channel. SOUND & LANGUAGE CONTROL 46 Use the S A P button to select your desired MTS mode in analog signal. Each time you press the S A P button, M o n o, S t e r e o, or S A P appear in turn. ■ If other languages available on the digital signal, select them with the S A P button. Press E X I T button to save and return to TV viewing. INPUT PICTURE SOUND SAP TIMER FAV ADJUST VOL MUTE CH AUDIO LANGUAGE MUTE VOL CH CC MENU EXIT BACK Other languages may be available if a digital signal is provided by the broadcasting station. This feature operates only in DTV/CADTV mode. ENTER Language Press the G button and then use select L a n g u a g e. or or button : English Key Lock : Off Caption : Off ISM Method : Off Low Power : Off button to Press the G button and then use select A u d i o. or button to Language Key Lock Menu English Audio English Caption ISM Method Low Power button to select E n g l i s h, S p a n i s h, or Use D or F r e n c h. Press the E X I T button to return to TV viewing or press the B A C K button to return to the previous menu. SOUND & LANGUAGE CONTROL Press the M E N U button and then use to select the O P T I O N menu. 47 SOUND & LANGUAGE CONTROL ON-SCREEN MENUS LANGUAGE SELECTION MUTE VOL CH CC MENU EXIT BACK The menus can be shown on the screen in the selected language. First select your language. ENTER Language Press the M E N U button and then use D or E button to select the O P T I O N menu. SOUND & LANGUAGE CONTROL Press the G button and then use select L a n g u a g e . Press the G button and then use select M e n u . or or button to button to : English Key Lock : Off Caption : Off ISM Method : Off Low Power : Off Language Key Lock Menu English Audio English Caption ISM Method Use D or E button to select your desired language. From this point on, the on-screen menus will be shown in the selected language. Low Power 48 Press the E X I T button to return to TV viewing or press the B A C K button to return to the previous menu. CAPTION MODE VOL MUTE CH CC MENU BACK EXIT Caption must be provided to help people with hearing loss watch TV. ENTER Use the C C button to select Caption O n or O f f. ■ SOUND & LANGUAGE CONTROL ■ When selecting O f f, Sub-menus for Analog, DTV, and Digital Option become disabled. Press the E X I T button to save and return to TV viewing. You can also adjust C a p t i o n in the OPTION menu. Language : English Language Key Lock : Off Key Lock Caption : Off Caption ISM Method : Off ISM Method Analog Text1 Low Power : Off Low Power Digital Service3 Mode On Digital Option 49 SOUND & LANGUAGE CONTROL MUTE VOL CH CC MENU EXIT BACK Analog Broadcasting System Captions Select a caption mode for displaying captioning information if provided on a program. Analog caption displays information at any position on the screen and is usually the program's dialog. Caption/Text, if provided by the broadcaster, would be available for both digital and analog channels on the Antenna/Cable. This TV is programmed to memorize the caption/text mode which was last set when you turn the power off. This function is only available when C a p t i o n Mode is set O n. SOUND & LANGUAGE CONTROL Press the M E N U button and then use D or E button to select the O P T I O N menu. Press the G button and then use select C a p t i o n . or button to Press the G button and then use select A n a l o g . or button to ENTER Language : English Key Lock : Off Caption : Off ISM Method : Off Low Power : Off Language Key Lock Caption Use D or E button to select C C 1 ~ 4 , T e x t 1 ~ 4 Mode On ISM Method Analog Text1 Low Power Digital Service3 Digital Option CAPTION The term for the words that scroll across the bottom of the TV screen; usually the audio portion of the program provided for the hearing impaired. ■ TEXT The term for the words that appear in a large black frame and almost cover the entire screen; usually messages provided by the broadcaster. ■ 50 Press the E X I T button to return to TV viewing or press the B A C K button to return to the previous menu. MUTE VOL CH CC MENU EXIT BACK Digital Broadcasting System Captions Choose the language you want the DTV/CADTV Captions to appear in. Other Languages can be chosen for digital sources only if they are included on the program. This function in only available when Caption Mode is set On. ENTER Language Press the G button and then use select C a p t i o n. or or button : English Key Lock : Off Caption : Off ISM Method : Off Low Power : Off button to Press the G button and then use select D i g i t a l. or button to Language Key Lock Caption Use D or E button to select S e r v i c e 1 ~ S e r v i c e 6. Press the E X I T button to return to TV viewing or press the B A C K button to return to the previous menu. Mode On ISM Method Analog Text1 Low Power Digital Service3 Digital Option SOUND & LANGUAGE CONTROL Press the M E N U button and then use to select the O P T I O N menu. 51 SOUND & LANGUAGE CONTROL MUTE VOL CH CC MENU BACK EXIT Caption Option Customize the DTV/CADTV captions that appear on your screen. This function in only available when Caption Mode is set On. Press the M E N U button and then use to select the O P T I O N menu. or ENTER button Language SOUND & LANGUAGE CONTROL Press the G button and then use select C a p t i o n. Press the G button and then use select D i g i t a l O p t i o n. or or button to : English Key Lock : Off Caption : Off ISM Method : Off Low Power : Off button to Language Press the G button and then use select C u s t o m. or button to Key Lock Caption Mode ISM Method Analog Text1 On Low Power Digital Service3 Digital Option Use F or G button to customize the S t y l e, F o n t, etc., to your preference. A preview icon is provided at the bottom of the screen, use it to see the caption language. S i z e : Set the word size. ■ F o n t : Select a typeface for the text. ■ T e x t C o l o r : Choose a color for the text. ■ T e x t O p a c i t y : Specify the opacity for the text color. ■ B g (B a c k g r o u n d) C o l o r : Select a background color. ■ B g (B a c k g r o u n d) O p a c i t y : Select the opacity for the background color. ■ E d g e T y p e : Select an edge type. ■ E d g e C o l o r : Select a color for the edges. ■ Selection ( G or ) leads you to the Caption Option Screen. Language Key Lock Caption ISM Method Low Power Style Mode On D E Custom Size Analog Text1 A Standard Font Font 1 Digital Service3 Text Color White Digital Option Text Opacity Solid Bg Color Black Bg Opacity Solid Selection ( GType or ) leads you Edge None to the Caption Option Screen. Edge Color Black 52 Press the E X I T button to return to TV viewing or press the B A C K button to return to the previous menu. TIME SETTING CLOCK SETTING MUTE VOL CH CC MENU EXIT BACK Auto Clock Setup The time is set automatically from a digital channel signal. The digital channel signal includes information for the current time provided by the broadcasting station. Set the clock manually if the current time is set incorrectly by the auto clock function. Press the G button and then use select C l o c k. Clock or or button : - - - -, - - - -, - - : - - - - Off Time : Off On Time : Off Sleep Time : Off Auto sleep : Off button to Press the G button and then use select A u t o. or button to Clock Off Time On Time Press the G button and then use D or E button to select your viewing area time zone: U.S.A : E a s t e r n , C e n t r a l , M o u n t a i n , P a c i f i c , A l a s k a or H a w a i i. Canada : E a s t e r n , C e n t r a l , M o u n t a i n , P a c i f i c , N e w F . l a n d or A t l a n t i c. Sleep Time Auto Year Date Time ----- / --- : -- -- Auto sleep Time Zone Eastern Daylight Saving Auto Clock Press the G button and then use D or E button to select A u t o, O f f, O n, depending on whether or not your viewing area observes Daylight Saving time. TIME SETTING Press the M E N U button and then use to select the T I M E menu. ENTER Off Time On Time Sleep Time Auto Year Date Time --- ---/ -: -- -- Auto sleep Time Zone Press the E X I T button to return to TV viewing or press the B A C K button to return to the previous menu. Daylight Saving Eastern G Auto 53 TIME SETTING MUTE VOL CH CC MENU EXIT BACK Manual Clock Setup If the current time setting is wrong, reset the clock manually. ENTER Clock TIME SETTING Press the M E N U button and then use to select the T I M E menu. Press the G button and then use select C l o c k. or or button : - - - -, - - - -, - - : - - - - Off Time : Off On Time : Off Sleep Time : Off Auto sleep : Off button to Press the G button and then use select M a n u a l. or button to Clock Off Time On Time Press the G button and then use F or G button to select either the year, date, or time option. Once selected, use the D or E button to set the year, date, and time options. Sleep Time Manual Year Date Time --- ---/ -: -- 54 Press the E X I T button to return to TV viewing or press the B A C K button to return to the previous menu. -- Auto sleep AUTO ON/OFF TIME SETTING MUTE VOL CC MENU Press the M E N U button and then use to select the T I M E menu. or ENTER button Clock Press the G button and then use select O f f T i m e or O n T i m e. or Press the G button and then use D or E button to select O n. ■ To cancel the O n / O f f t i m e function, select O f f. button to : - - - -, - - - -, - - : - - - - Off Time : Off On Time : Off Sleep Time : Off Auto sleep : Off TIME SETTING EXIT BACK This function operates only if the current time has been set. The O f f T i m e function overrides the O n T i m e function if they are both set to the same time. The TV must be in standby mode for the O n T i m e to work. If you do not press any button within 2 hours after the TV turns on with the O n T i m e function, the TV will automatically revert to standby mode. CH Clock Press the G button and then use D or E button to set the hour. Off Time On Time Sleep Time Off On Auto sleep Press the G button and then use D or E button to set the minutes. Time Ch. Vol. Only On Time Press the G button and then use select the channel at turn-on. or 6 : 30 AM TV 2-0 17 button to Press the G button and then use D or E button to set the sound level at turn-on. Press the E X I T button to return to TV viewing or press the B A C K button to return to the previous menu. 55 TIME SETTING SLEEP TIME SETTING POWER TV The Sleep Time turns the TV off at the preset time. Note that this setting is cleared when the TV is turned off. INPUT PICTURE SOUND SAP TIMER FAV ADJUST VOL Press the T I M E R button repeatedly to select the number of minutes. First the O f f option appears on the screen, followed by the following sleep timer options : 10, 20, 30, 60, 90, 120, 180, and 240 minutes. TIME SETTING When the number of minutes you want is displayed on the screen, press the E N T E R button. The timer begins to count down from the number of minutes selected. To check the remaining minutes before the TV turns off, press the T I M E R button once. To cancel the Sleep Time, press the T I M E R button repeatedly to select O f f. ■ You can also set up the S l e e p T i m e in the T I M E menu. Clock : - - - -, - - - -, - - : - - - - Clock Off Off Time : Off Off Time 10 min On Time : Off On Time Sleep Time : Off Sleep Time Auto sleep : Off Auto sleep 20 min 30 min 60 min 90 min 120 min 180 min 240 min 56 MUTE CH AUTO SHUT-OFF SETTING MUTE VOL CH CC MENU BACK EXIT If set to on and there is no input signal, the TV turns off automatically after 10 minutes. ENTER Press the G button and then use select A u t o s l e e p. or or button Clock : Oct 19, 2007, 03:44 AM Off Time : Off On Time : Off Sleep Time : Off Auto sleep : Off button to Press the G button and then use select O n or O f f. or button to Clock Off Time TV will be automatically turned off, in case of No Signal for 10 minutes. On Time Press the E X I T button to return to TV viewing or press the B A C K button to return to the previous menu. TIME SETTING Press the M E N U button and then use to select the T I M E menu. Sleep Time Auto sleep Off On 57 PARENTAL CONTROL / RATINGS Parental Control can be used to block specific ratings. The Parental Control Function (V-Chip) is used to block program viewing based on the ratings sent by the broadcasting station. The default setting is to allow all programs to be viewed. Viewing can be blocked by choosing the type of the program and the categories. It is also possible to block all program viewing for a time period. To use this function, the following must be done : 1. Set ratings and categories to be blocked. 2. Specify a password 3. Enable the lock V-Chip rating and categories Rating guidelines are provided by broadcasting stations. Most television programs and television movies can be blocked by TV Rating and/or Individual Categories. Movies that have been shown at the theaters or direct-to-video movies use the Movie Rating System (MPAA) only. Ratings for Television programs including made-for-TV movies : TV-G (General audience) ■ TV-PG (Parental guidance suggested) ■ TV-14 (Parents strongly cautioned) ■ PARENTAL CONTROL / RATING TV-MA (Mature audience only) (All children) ■ TV-Y ■ TV-Y7 (Children 7 years older) ■ SET PASSWORD & LOCK SYSTEM Setting up Your Password Set up blocking schemes to block specific ratings. A password is required to gain access to this menu. For Canada For USA Lock System Press the M E N U button and then use the D or E button to select the L O C K menu. Then, press the G button. Enter the password as requested. ■ The TV is set up with the initial password “0-0-0-0”. ■ 58 : Off Lock System : Off Set Password Set Password Movie Rating TV Rating-English TV Rating-Children TV Rating-French TV Rating-General Downloadable Rating Downloadable Rating Set Password Change the password by inputting a new password twice. Lock System After inputting the password, use the D or E button to choose S e t p a s s w o r d. Press the G button and then choose any 4 digits for your new password. As soon as the 4 digits are entered, re-enter the same 4 digits on the C o n f i r m. Then your changed password has been memorized. For Canada For USA : Off Lock System : Off Set Password Set Password Movie Rating TV Rating-English TV Rating-Children TV Rating-French TV Rating-General Downloadable Rating Downloadable Rating Lock System Press the E X I T button to return to TV viewing or press the B A C K button to return to the previous menu. Set Password Movie Rating New Confirm * * * * * * * * TV Rating-Children TV Rating-General Downloadable Rating ! NOTE Lock System Enables or disables the blocking scheme you set up previously. After inputting the password, use the D or E button to choose L o c k S y s t e m. Press the G button and then use the D or E button to select O n or O f f. ■ When you select O n, the Lock System is enable. For Canada For USA Lock System : Off Lock System : Off Set Password Set Password Movie Rating TV Rating-English TV Rating-Children TV Rating-French TV Rating-General Downloadable Rating Downloadable Rating PARENTAL CONTROL / RATING If you ever forget your password, key in ‘7’, ‘7’, ‘7’, ‘7’ on the remote control. Lock System Set Password Off On Movie Rating Press the E X I T button to return to TV viewing or press the B A C K button to return to the previous menu. TV Rating-Children TV Rating-General Downloadable Rating 59 PARENTAL CONTROL /RATINGS MOVIE & TV RATING Movie Rating (MPAA) - for USA only Blocks movies according to the movie ratings limits specified, so children cannot view certain movies. You can set the ratings limit by blocking out all the movies with the ratings above a specified level. Keep in mind that the movie ratings limit only applies to movies shown on TV, not TV programs, such as soap operas. Lock System After inputting the password, use the choose M o v i e R a t i n g. or : Off Set Password button to Movie Rating TV Rating-Children TV Rating-General Press the G button and then use the D or E button to select G , P G, P G - 1 3, R , N C - 1 7 or X . Downloadable Rating G (General audience) PG (Parental guidance suggested) ■ PG-13 (Parents strongly cautioned) ■ R (Restricted) ■ NC-17 (No one 17 and under admitted) ■ X (Adult only) ■ Blocking Off (Permits all programs) ■ ■ Blocking off : Permits all programs Lock System Set Password Movie Rating TV Rating-Children TV Rating-General If you set PG-13 : G and PG movies will be available, PG-13, R, NC-17 and X will be blocked. Downloadable Rating PARENTAL CONTROL / RATING Press E X I T button to return to TV viewing or press B A C K button to return to the previous menu. For USA Downloadable Rating After inputting the password, use the choose D o w n l o a d a b l e R a t i n g. Lock System or button to For Canada : Off Press the G button and then use the D or E button to select D i m 0, D i m 1, D i m 2, or D i m 3. Press the G button and then use the select D 1 L 1, D 1 L 2, or D 1 L 3. Press E X I T button to return to TV viewing or press B A C K button to return to the previous menu. Movie Rating TV Rating-English TV Rating-Children TV Rating-French TV Rating-General Downloadable Rating or E button to Downloadable Rating Set Password Movie Rating TV Rating-Children TV Rating-General ! NOTE : Off Set Password Downloadable Rating Lock System Set Password Lock System Downloadable Rating G Humer Sports Cruelty language Sadness This function may become available in the future and will be available only for digital channel signal. This function operates only when TV has received Region5 Rating data. 60 PG PG-13 NC-17 Blocking Off Based on rating table, your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual. TV Rating Children - for USA only Prevents children from watching certain children's TV programs, according to the ratings limit set. The children rating does not apply to other TV programs. Unless you block certain TV programs intended for mature audiences in the TV Rating - sub menu, your children can view those programs. Lock System : Off Set Password Movie Rating TV Rating-Children TV Rating-General After inputting the password, use the choose T V R a t i n g - C h i l d r e n. or button to Press the G button and then use the select A g e, or F a n t a s y V i o l e n c e. Press the G button and then use the select block options. or button to Downloadable Rating or button to Lock System Set Password Movie Rating Age(applies to TV-Y, TV-Y7) ■ Fantasy Violence(applies to TV-Y7) ■ TV Rating-Children Age Fantasy Violence TV Rating-General Downloadable Rating Press the E X I T button to return to TV viewing or press the B A C K button to return to the previous menu. TV Rating General - for USA only Based on the ratings, blocks certain TV programs that you and your family do not want to view. Lock System : Off Set Password Movie Rating After inputting the password, use the choose T V R a t i n g - G e n e r a l. or button to TV Rating-Children TV Rating-General Downloadable Rating Press the G button and then use the D or E button to select A g e, D i a l o g u e, L a n g u a g e, S e x or V i o l e n c e. Press the G button and then use the D or E button to select block options. Age(applies to TV-G,TV-PG,TV-14,TV-MA) ■ Dialogue-sexual dialogue (applies to TV-PG,TV-14) ■ Language-adult language (applies to TV-PG,TV-14,TV-MA) ■ Sex-sexual situations (applies to TV-PG,TV-14,TV-MA) ■ Violence (applies to TV-PG,TV-14,TV-MA) ■ PARENTAL CONTROL / RATING Lock System Set Password Movie Rating TV Rating-Children TV Rating-General Downloadable Rating Age Dialogue Language Sex Press the E X I T button to return to TV viewing or press the B A C K button to return to the previous menu. Violence 61 PARENTAL CONTROL /RATINGS TV Rating English - for CANADA only Selecting canadian english language rating system. Lock System After inputting the password, use the choose T V R a t i n g - E n g l i s h. or button to : Off Set Password TV Rating-English TV Rating-French Press the G button and then use the D or E button to select E , C , C 8 +, G , P G, 1 4 +, 1 8 +, or B l o c k i n g O f f. E (Exempt) C (Children) ■ C8+ (Children eight years and older) ■ G (General programming, suitable for all audiences) ■ PG (Parental Guidance ) ■ 14+ (Viewers 14 years and older) ■ 18+ (Adult programming) ■ Blocking Off (Permits all programs) Downloadable Rating ■ ■ Lock System Blocking off : permits all programs Set Password TV Rating-English TV Rating-French Downloadable Rating Press E X I T button to return to TV viewing or press B A C K button to return to the previous menu. C8+ PG 14+ 18+ Blocking Off PARENTAL CONTROL / RATING TV Rating French - for CANADA only Selecting canadian french language rating system. After inputting the password, use the D or E button to choose T V R a t i n g - F r e n c h. Press the G button and then use the D or E button to select E , G , 8 a n s +, 1 3 a n s +, 1 6 a n s +, 1 8 a n s +, or B l o c k i n g o f f. Lock System : Off Set Password TV Rating-English TV Rating-French E(Exempt) ■ G(General) ■ 8ans+ (General-Not convenient for little children) ■ 13ans+ (Not convenient for children of 13 years and younger) ■ 16ans+ (Not convenient for children of 16 years and younger) ■ 18ans+ (This programs is only for adults) ■ Blocking off (Permits all programs) Downloadable Rating ■ 62 Press E X I T button to return to TV viewing or press B A C K button to return to the previous menu. Lock System Blocking off : permits all programs Set Password TV Rating-English TV Rating-French Downloadable Rating 8 ans+ 13 ans+ 16 ans+ 18 ans+ Blocking Off APPENDIX TROUBLESHOOTING The operation does not work normally. Check to see if there is any object between the product and the remote control causing obstruction. Ensure you are pointing the remote control directly at the TV. ■ Ensure that the batteries are installed with correct polarity (+ to +, - to -). ■ Ensure that the correct remote operating mode is set: TV, VCR etc. ■ Install new batteries. ■ The remote control doesn’t work Power is suddenly turned off Is the sleep timer set? ■ Check the power control settings. Power interrupted. ■ No broadcast on station tuned with Auto off activated. ■ The video function does not work. Check whether the product is turned on. ■ Try another channel. The problem may be with the broadcast. ■ Is the power cord inserted into wall power outlet? ■ Check your antenna direction and/or location. ■ Test the wall power outlet, plug another product’s power cord into the outlet where the product’s power cord was plugged in. ■ No picture &No sound ■ This is normal, the image is muted during the product startup process. Please contact your service center, if the picture has not appeared after five minutes. Adjust Color in menu option. Keep a sufficient distance between the product and the VCR. ■ Try another channel. The problem may be with the broadcast. ■ Are the video cables installed properly? ■ Activate any function to restore the brightness of the picture. ■ APPENDIX Picture appears slowly after switching on ■ No or poor color or poor picture Horizontal/vertical bars or picture shaking ■ Check for local interference such as an electrical appliance or power tool. Station or cable product experiencing problems, tune to another station. ■ Station signal is weak, reorient antenna to receive weaker station. ■ Check for sources of possible interference. ■ Poor reception on some channels Lines or streaks in pictures ■ Check antenna (Change the direction of the antenna). 63 APPENDIX The audio function does not work. Press the VOL or VOLUME button. ■ Sound muted? Press MUTE button. ■ Try another channel. The problem may be with the broadcast. ■ Are the audio cables installed properly? ■ Picture OK & No sound No output from one of the speakers Unusual sound from inside the product ■ Adjust Balance in menu option. ■ A change in ambient humidity or temperature may result in an unusual noise when the product is turned on or off and does not indicate a fault with the product. There is a problem in PC mode. (Only PC mode applied) The signal is out of range APPENDIX Vertical bar or stripe on background & Horizontal Noise & Incorrect position Screen color is unstable or single color 64 Adjust resolution, horizontal frequency, or vertical frequency. ■ Check the input source. ■ ■ Work the Auto configure or adjust clock, phase, or H/V position. (Option) Check the signal cable. ■ Reinstall the PC video card. ■ MAINTENANCE Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you can enjoy your new TV. Caution: Be sure to turn the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen Here’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it’s almost dry, and then use it to wipe the screen. Make sure the excess water is off the screen, and then let it air-dry before you turn on your TV. Cleaning the Cabinet To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth. ■ Please be sure not to use a wet cloth. ■ Extended Absence CAUTION If you expect to leave your TV dormant for a long time (such as a vacation), it’s a good idea to unplug the power cord to protect against possible damage from lightning or power surges. APPENDIX 65 APPENDIX PRODUCT SPECIFICATIONS ■ The specifications shown above may be changed without prior notice for quality improvement. 32PC5DVC (32PC5DVC-UG) MODELS Including stand 819.9 x 603.8 x 255.4 mm Dimensions (Width x Height x Depth) 32.3 x 23.8 x 10.1 inches Excluding stand 32.3 x 21.8 x 3.1 inches 819.9 x 554.2 x 78.1 mm Weight including stand 36.8 pounds / 16.7 kg excluding stand 34.8 pounds / 15.8 kg AC100-240V ~ 50/60Hz Power requirement Television System NTSC-M, ATSC, 64 & 256 QAM Program Coverage VHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV 1-135 75 ohm External Antenna Impedance Operating Temperature 32 ~ 104°F (0 ~ 40°C) Operating Humidity Less than 80% Storage Temperature -4 ~ 140°F (-20 ~ 60°C) Environment condition APPENDIX 66 Storage Humidity Less than 85%
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Create Date : 2007:10:24 13:39:13 Producer : Acrobat Distiller 4.0.5 for Macintosh Author : sun Creator : 3.3: LaserWriter 8 Z1-8.7.1 Title : SAC30708021-Edit1-en Modify Date : 2007:10:24 13:41:17+09:00 Page Count : 70EXIF Metadata provided by EXIF.tools