LG Electronics USA 37LEVSB LCD TV/Monitor User Manual 2
LG Electronics USA LCD TV/Monitor 2
Contents
- 1. User Manual 1
- 2. User Manual 2
- 3. User Manual 3
User Manual 2
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 768856 |
| Application ID | 80OtjZftzRC03QxARmnzkQ== |
| Document Description | User Manual 2 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 286.35kB (3579335 bits) |
| Date Submitted | 2007-03-15 00:00:00 |
| Date Available | 2007-03-15 00:00:00 |
| Creation Date | 2007-03-14 14:05:40 |
| Producing Software | Adobe Acrobat 7.0 Image Conversion Plug-in |
| Document Lastmod | 2007-03-14 14:06:09 |
| Document Title | User Manual 2 |
| Document Creator | Adobe Acrobat 7.0 |
Your TV's OSD (On Screen Display) may differ slightly from what is shown in this manuals
Press the
SETUP
517W
OPTION
Auto mnmq
Manual Vunlng
chum gem
Lock ‘ysmn
m Wigwam
mm mm
anin Nanny
w mung-chum"
rv Rntlng»6°nwnl
Imam mm
ungu-qe
mm mm
mum»
Key Lent
caption
snln
Press the button and then use .,
For Canada
Luck Syn."-
su Passwlud
mach» (hanrul
w m "91an
w Ranngvhlnm
mwt Block
PICTURE
AUDIO
TIME
, button and then use or '/ button to select each menu.
- button to display the available menus,
mum Mods
Calm rampmmm
xo
Adm-(«1
Amm am
pm" Run
Susan
Sound Mods
Amu mum.
mam
rv make.
dent
ONTlma
on me
sxm nmn
Auto slew
Slandavd
On
On
6 “3-44 m
"IOHlNOD 13NNVHD / Al DNIHDlVM
39
WATCHING TV /CHANNEL CONTROL
CHANNEL SETUP
Auto Scan(Auto Tuning)
Automatically finds all channels available through antenna or
cable inputs, and stores them in memory on the channel list.
Run Auto Tuning again after any Antenna/Cable connection
changes.
A password is required to gain access to Auto Tuning menu if
the Lock System is turned on.
“W ‘l m in...“
0 Press the MENU button and then use A or V but» ' mmmimmg
ton to select the SETUP menu. (hum-Ink
9 Press the b button and then use A or 7 button to
select Auto Tuning
"IOHLNOD T3NNVH3 / Al DNIHDLVM I
a Press the ENTER button to begin the channel
search. Allow Auto Tuning to complete the channel ' Aum mums
search cycle for ANTENNA and CABLE "WW" '“"‘"9
channel m:
int-(halt mat I—INM lo
a." ham luv-Ira «mi
0 NOTE
mm";
Auto Vunlnq
Manual Tuning
mm M, ‘E WWW
- ,
mm, mm
in "H“ mum-nun
unu-
v-sa anneal-n
”nut-u mum
human-l at
Analog TV antenna
Digital DTV antenna ___
Analog CATV cable “a flaw
Digital CADTV cable
Add/Delete Channel(ManuaI Tuning)
A password is required to gain access to Manual Tuning
menu if the Lock System is turned on.
If selecting DTV or CADTV input signal, you can view the
on-screen signal strength monitor to see the quality of
the signal being received.
WP Auto Yunlflc
Press the MENU button and then use A or V button _ 7’ Manual Vunmg
to select the SETUP menu, manna Edlt
Press the P button and then use A or V button to
select Manual Tuning,
Press the b button and then use A or V button to
selett DTV. TV‘ CADTV. and CATV, Auto mnmg
mi humu thlhvaafl
(tunnel Edit nah-um: ”Mb“
”3“ ,1 2_ l
Press the V button and then use A or V butmn to
select channel number you want to add or delete.
Press the ENTER button to add or delete for the
channel number,
r am mnma
‘ m; 7 “magnum“;
a Press EXIT button to return to TV viewing or press 01 | a iiduvmmmhfl
MENU button to return to the previous menu. ”W E “
0 NOTE
D This dig'tal channel number is a physical channel
number, which is cliFFerent from the normal channel
number shown in Channel Edit,
"IOtllNOD HNNVHD / Al DNlHDlVM I
WATCHING TV /CHANNEL CONTROL
"lOtllNOIJ "I3NNVHD / Al DNIHDIVM I
42
Channel Editing
From the default channel list created from the Auto Tuning
channel search, you can create two different types of channel
lists in memory: "custom list" and "favorite channel list”.
A custom list can be created by toggling each channel on or off
with ENTER button. The channels in the Custom List are dis-
played in black and the channels deleted from the Custom List
are displayed in gray. Once a channel is highlighted you can add
or delete the channel by referring to the small window at the
topAleit corner of the screen.
You can create your own Favorite List. Use the FAV button on
the remote control when a channel is highlighted and then add
or delete the channel to/from your Favorite List.
SFflIF l Mlle Tuning
Press the MENU button and then use A or 7 button _ manual mama
to select the SETUP menu. thannd (an
Press the b button and then use A or V button to
selectchannel Edit.
Press the P button. You will now see a screen filled
with channel numbers and a preview picture.
mm mm
Manual lunlng
Use A V 1 P button (a select a channel and then ("W‘fl W"
use the ENTER button to add or delete it. Press
FAV button to add the channel to the Favorite List,
The surfing icon will appear in front of that channel
number.
9 Press EXIT button to return to TV viewing or press
MENU button to return to the previous menu.
> whammmwm.
an...“- m...
INPUT LIST
Press theINPUT button to display external device that is
connected to the unit. on screen.
Press the ENTER button to change the input to the active
external device. Use the A or V button to select the
input source
input my
mum
mm
w 1
ComDont-nfl
o IfaII external input sources are connected:
Antenna — Cable |—>| AV! l—l AV2 — Component!
I l
| HDMIS — HDMIZ .—| HDMH | —| RCB-PCJ .— ComponentZ
e if no external input sources are not connected:
Antenna 0—4
lOleOD HNNVHD / Al DNIHDlVM I
e If there is any external input source connected:
(ex: When connected only to AV 2)
Antenna —> —o -
t—l
Antanna: Select it when watching the DTV/TVA
Cable: Select it when watching the CADTV/CATV.
AV 1, AV 2 : Select it when watching the VCR or external equipment.
Component 1-2 : Select it when using the DVD or the Digital set-top box depend on connector,
KGB-PC : Select it when using PC depend on connector.
HDMl, HDMI2, HDMl3 : Select it when using DVD, PC or Digital set-top box depend on connector.
WATCHING TV /CHANNEL CONTROL
This operates only for the devices with the w
This allows you to control and play other AV devices
connected to the display through HDMI cable without
additional cables and settings.
SimpLink Preparations
®m|=L|nK
logo. Please check the ©MH-lfl‘logo.
"IOHLNOD T3NNVH3 / Al ON HDWM I
44
3 Connect the HDMI/DVI IN I, 2 or 3 terminal of the
TV to the rear terminal (HDMI output) of the
SimpLink device with the HDMI cable. ‘ ‘ Langungq
Afterconnecting the HDMI jack for the home theater 22:52“
with svmlenlt function in the above method. connect i mm
the DIGITAL AUDIO OUT OPTICAL on the back of “my,"
the TV to the DIGITAL AUDIO OUT terminal on the ““ seim
back of the simpLink device with the Optical cable,
Press the MENU button and then use A or 7 button
to select the OPTION menu.
u "my.
Input label
Press the b button and then use A or 7 button to
select SimpLink.
Simpunk
m taut
new.
(spun
mm
Press the b button and then use A or V button to
select On .
009
9 Press EXIT button to return to TV viewingor press
MENU button to return to the previous menu.
0 NOTE
b When operating the external device with SimpLink. press the TV button among the MODE button on
the remote controlv
bWhen you switch the In ut source with the INPUT button on the remote control, you can stop the
operation of device worEed by Simptink.
b When you select or operate the media device with home theater iunction, the speaker automatically
switches to home theater speaker (HT speaker).
b When u execute ‘Photo List, Music List 'Iunction during DVD playback included in home theater sup-
porte the SimpLink stops and the applicable function is executed after switching the input to TV.
SimpLink Functions
Dlred Play
Alter connecting AV devices to TV, you an dimdy (onlml (he dwicesand play media
without adcilional setting).
Sal-d AV dlvico
lnnhlm mu Io wlul one (1! AV dukex mum-t led In Iv and play il.
Disc playbad
Control conneded AVdEIiCéS by messing the CE - 3 -E: @' E)- E.3,
lvl P. ENTER bllllmm and bullum. Fox play, imnw, map, LN "true, ha! lmwnnl
duplex skip.
Power off all dtvice:
When you power all TV‘ all connected de-icesare tumed olfi
Switch audio-out
Ol'lrn. All MW w.|\' In wild: Audio am.
(A device. “hldl is connected m TV through HDMI (able but dais no! support
Simplink does not ptMide this function)
After selecting the TV button of the MODE on the remote cmuol‘
pvess (he SIMPLINK button.
Use A V 1 b button to select the desired device and then mess
the ENTER buncn,
(.l)l|ll0l ll)llrll‘(lN| [W tlwitetsbvaxtiny‘ "to (E . 3 vi
a. Q. gig. AVG D. ENTER buttons.
Simplink Menu
0 TV viewing : Sir-ild1 to the pie/ious TV
channel negaldlexs 04 die current mode.
ODISC playback: Sch-(I and phv diun. bS-lmed Dw'xe
Wlwn lnulliplr dis-<5 .Ill‘ Available, "K‘
Iillrs of Ilw l‘kth .no mnvrniunlly rli».
| I ll . ,
played 4 In- lm 0!" u! Ihe wet-n > Wluvmn “vim.“
a VCR playback : I'Liv and mutual Ihe ‘W‘lmm‘l‘i’lh‘di'm
gonna led V( R.
0 "DD Recnrdillxi Playback: I’l.|v and ,, Wilma MB
(unlml l('( onlinm almed in “DD. m (Media
man (do!)
oAudio Out lo HT spnqu/Audiu
Oul lo IV: Sch! Ml spunk“ m IV
xprnlwr lnr Amie Onl.
10NINOT) TlNNVHT) / Al fiNIIIDIVM
WATCHING TV /CHANNEL CONTROL
INPUT LABEL
Is
In
502
.\
5/
Sets a label to each input sounce which is not in use when you
press INPUT buttnn.
II
unqunue
Press the MENU button and then use A or 7 but- . r. "mu”. 1.4
ton to select the OPTION menu. Sbmpunk
Key Lad
, ‘ ("man
5»: m
o Press the b button and then use A or 7 button to
select Input Label.
"IOHlNOD 13NNVH3 / Al DNIHDIVM I
o Press the P button and then use A or V button to
select the source: AVI. AVZ, Componentl .
| nngunqk
ComponentZ, RGB-PC, HDMII, HDMI2 or HDMIK. w NW“ A“, an... 59, I
Svmpum AV? VCR
my (m Compenem' mm
um" (ampenentz M1
0 Press the 4 or P button to select the label. smb new: vcn
NDMI‘ Gem. 4
Hum: saumu
Moms Clhle Fox
9 Press EXIT button to return to TV viewing or press
MENU buttun to return to the previous menu.
MEDIAHosr
ENTRY MODES [Media Host Menu]
When you connect a USB device or press the Q button, this screen is
displayed, automatically.
In USB device, you can not add a new folder or delete the existing folder. i \ Must Us!
0 Press the A or V button to select the desired item.
a Press the ENTER button to move to Photo List or MUSic List of
USB device
9 Press the USB EJECT button of remote control before removing
the USB device.
0 NOTE
’ Press the USE EjECT button of remote control before removing the USB device.
P Only a USB storage device is recognizable.
P If the USB storage device is connected through a USB hub, the device is not recognizable.
P A USB storage device using an automatic recognition program may not be recognized,
P A USB storage device which uses its own driver may not be recognized.
P in case ofa card reader. up to four memory cards are concurrently recognizable.
P The recognition speed ofa USB storage device may depend on each device.
P Please do not turn off the TV or unplug the USB device when the connected USB storage
device is working. When such device is suddenly separated or unplugged, the stored files or
the USB storage device may be damaged. To unplug the USB storage device. please press the
USE EJECI' button on the remote control, and then unplug it safely.
P Please do notconnect the USB storage device which was artificially maneuvered on the PC.
The device may cause the product to malfunction or fail to be played. Never forget to use only
a USB storage device which has normal music files or image files.
’ Please use only a USB storage device which was formatted as a FAT or a NTFS file system pro-
vided with the Windows operating system. In case of a storage device formatted as a different
utility program which is not supported by Windows. it may not be recognized.
P in case ofa hard disk drive (HDD) formatted as NTFS. writing and deletion are not allowable.
7 Please connect power to a USB storage device which requires an external power supply. If not,
the device may not be recognized.
’ Please connect a USB storage device with cable is offered by USB maker. if connected with
cable is not offered by USE maker or an excessively long cable, the device may not be recog-
nized.
> Some USB storage devices may not be supported or operated smoothly.
P If the name ofa folder or file is too long, it will not be displayed or recognized.
lSOH vrcnw I
lSOH VIGEIN I
48
MEDIAHosr
PHOTO LIST
It's available to playback the photo file(‘.jpg) in the USB device.
The On Screen Display may be different from your set‘ Images
are an example to assist with the TV operation.
Screen Components
0 Usable usa memory
0 Current page/Total pages
0 Toto! number of marked
thumbnail photos
0 Corresponding buttons
on the remote control
"a
m- Lnu r»: ,
Photo Selection and PopUp Menu
As shown, up to 15 thumbnail photos are listed per page.
Use the CH A or v button to navigate in the thumbnail
photo page.
Use the MARK button to mark or unmark a photo. When
one or more photos are marked, you can view individual
photos or a slide show of the marked photos. If no photos
are marked. you can view all photos individually or all pho»
tos in the folder in a slide show.
Use A V 1 P button to navigate the appropriate thumb-
nail photos, then press the ENTER button to show the
PopUp menu.
> View: Display the selected rtern.
P Mark All: Mark all photos on the screen.
P Delete: Delete the selected photo item.
> Cancel : Close the pop-up menu.
Repeatedly, press ExlT button to return to TV viewingor
press the button to return to the Media Host menu
lSOH VIGHIN
49
lSOH VICHIN I
50
MEDIAHosr
Set up the menu in Full-Sized Screen
You can change the settings to display photos stored on a USB
device. on a full-sized screen.
Detailed operations are available on full-sized photo view screen.
0 Use the CH A or 7 button to navigate the thumbnail
photo page.
0 Use A V 4 P button to navigate the appropriate thumb-
nail photos, then press the ENTER button to show the
PopUp menu.
9 Use A v button to Move to the View menu, then press
the ENTER buttons
0 The selected photo is displayed in full size.
> Slide Show: When no picture is selected. all photos
in the current folder are displayed during slide show,
When selected. the selected photos are displayed
during slide Show, To start slide Show. press ENTER
button on m .
' fit the time interval of the slide Show in Option.
' A slide show continues for a maximum of4 hours.
After 4 hours, the slide show will end and go to TV
mode or external input mode.
, BGM : Listen to music while viewing photos in full
size. To start BGM. press ENTER button on EEZEI.
' Set the BGM device and album in Option.
> (Rotate): Rotate photos,
' Rotates the photo 90", ISO", 270", 360" (lotk-
wise upon ENTER button on (Rotate).
7 Delete 1 Delete photoss Use‘ or P button to select
Delete and press ENTER button.
Thu Mm l-llio D, i photo may change [he silo ol
the photo displayed on the «men In mu (in.
Q m yum-ix n: 411-117
—i-~5b
’ Option : Set values for Slide Speed and Music
folder. Use 1 or bbunon to select Optionand
press ENTER button.
1 Use 1 or P button and ENTER button to set va|<
ues. Then go no and press ENTER to save
the settings.
' You cannot change Music Folder while BGM is
playing.
> Hide : Hide the menu on the full-sized screen. Use
1 or P button to selett Hide and press ENTER
button.
I To see the menu again on the full-sized screen.
press ENTER button to display,
Use A V 4 P button to select the previous or next photo.
Use A V 4 P button to select and control the menu on
the full-sized screen.
Use EXIT button to go back to the photo list from the full-
sized screen.
Repeatedly, press EXIT button to return to TV viewing or
press @ button to return to the Media Host menu.
lSOH VIGEIIN I
51
lSOH VIGEIN I
52
MEDIAHosr
MUSIC LIST
Purchased music files(".MP3) may contain copyright restrictions.
Playback of these files may not be supported by this modeL
Music file on your USB device can be played by this unit.
The On Screen Display may be different from your set. Images
are an example to assist with the TV operation.
Screen Components
0 Usable USB memory
m” p 1m
1 =
U Bill I! Had
Warm N m. I'lwn
w Hll m
Wherever Ynu mil I‘m IWIII Stay va Vnu.
Sm: Humm-
0 Current page/Total page;
0 Total number of marked musics Allflise
0 Current playing time/Total play- m "M",
ing time Insatiallle
9 Corresponding buttons
on the remote contnol
Music Selection and PopUp Menu
As shown , up to 8 music titles are listed per page.
Use the CH A or V button to navrgate in the music titles
page.
Use MARKbutton to mark or unmark a music. When one or
more music files are marked. the marked musics will be
played in sequence. For example. if you want to listen to
only one music repeatedly. just mark the music only and
play it. If no music is marked. all the music in the folder will
be played in sequence.
Use A V button to navigate the appropriate musics. then
press the ENTER button to show up the pop-up menu.
> Play (Duringshop) Play the selected musics.
Once a music finishes playing, the next selected
one will be played. When there are no selected
musics to play. the next one in the current folder
will be played. it you go to a different folder and
press the ENTER button, the current music in play-
back will stop.
’ Stop Play (During playback) : Stop the playing
musics.
> Play With Photo : Start playing the selected musics
and then move to the Photo List.
’ Mark All: Mark all musics in the folder.
> Delete: Delete the selected musics.
' Cancel : Close the popup menu.
Repeatedly. press EXlT button to return to TV viewing or
press button to return to the Media Host menu.
' if you don't press any button for a while during the play-
ing. the play information box (as shown in the below) will
float as a screen saver
' The Screen Saver'?
Screen saver is to prevent screen pixel damage due to an
fixed image remainingon the screen for 3 extended period
ot time.
m.
mu n i): lyi-
n, i mm i~i|'.1uini|ii\‘nt
uni-m
m." w
ii an. m
‘lfli’t imi
lSOH VICHIN
0 NOTE
P When music is playing, is dis-
played in front of the music title.
P A damaged or corrupted music
does not play but displays 00:00
in playtime.
P A music downloaded from a paid
service with copyright protection
does not start but displays inap-
propriate information in playtime
V Ifyou press ENTER- E . EXIT
buttons. screen saver is stopped.
’THEE"'M®
buttons on the remote control are
also available in this mode.
53
1OHLNOI) Eltlfllifld I
54
PICTURE CONTROL
PICTURE SIZE (ASPECT RATIO)CONTROL
This feature lets you choose the way an analog picture with a 4:3 aspect ratio is dis-
played on your TV When you receive an analog picture with a 4:3 aspect ratio on
your 16:9 TV, you need to specify how the picture is to be displayed.
- RGBJ’C input source use 4:3 or 16:9 aspect ratio.
0 You can also adjust Aspect Ratio in the PICTURE menu,
Set by program Zoom 1
Selects the proper picture proportion to match Choose Zoom 1 when you want to view the
the source's image. picture without any alteration. However, the top
and bottom portions of the picture Will be
(4:3-' 4:3) (16:9" 16:9) cropped.
4:3
Choose 4:3 when you want to View a picture
with an original 4:3 aspect ratio.
Zoom 2
Choose Zoom 2 when you want the picture to
be altered. both vertically extended and
cropped, The picture takings halfway trade off
between alteration and screen coverage.
16:9
Adjust the picture horizontally in a linear pro-
portion to fill the entire screen
PRESET PICTURE SETTINGS
Picture Mode -Preset
Picture Mode adjusts the TV for the best picture appearance.
Select the preset value in the Picture Mode menu based on the
program category
Intelligent Eye. Dynamic, Standard, Mild Settings are preset for
optimum picture quality at the factory and are not adjustable.
In the User Land User 2 modes only, user can directly
adjust the contrast. brightness. color, sharpness, tint.
0 Press the PICTURE button repeatedly to select the picture
appearance setup option as shown below:
Intelligent Eye, Dynamic. Standard, Mild, Userl. and
UserZ (your own settings),
a Press the EMT button to save and return to TV viewing.
I You can also use the PICTURE menu to adjust Picture Mode.
a mare m ode
mar map-mm.
xn
Mama
mm mm
m nuw Run!
sum
. nae
mm Vemws'amre
xe
Advanced
mom Fan 0
mum ram
sum
llilq-m m
Dynmue
Standard
Mus
4 User |
um z
"IOHLNOD EHILDId I
55
PICTURE CONTROL
Color Tone —Preset
Choose one ofthree automatic color adjustments. Set to warm
to enhance hotter colors such as red, or set to cool to see less
intense colors with more blue.
When selecting Picture Mode options (Dynamic, Standard and
Mild). Color Temperature is automatically change.
When selecting Picture Mode options (User I and User 2), you
can choose the Color Temperature.
hnumMudn
Press the MENU button and then use A or V button comrummm
to select the PICTURE menu. 1 ‘ xn
Adv/mud
Mum Ratio
Plume Reset
Press the D button and then use A or V button to 505"
select Color Temperature.
TOHLNOD 38fl13|d I
Press the b button and then use A or V button to
select either Cool, Medium, Warm or User. ”MEMO“
pL-v‘hnv- s
X!)
Advanced
Press EXIT button to return to TV viewingor press ‘ ‘ Aged aurru
MENU button to return to the previous menu. » ‘ mam-um
5mm
MANUAL PlCTURE ADJUSTMENT
Picture Mode -User Mode
Adjust the picture appearance to suit your preference and
viewing situations.
Press the MENU button and then use A or V button
to select the PICTURE menu.
Press the 5 button and then use A or V button to
selett Picture Mode.
Press the b button and then use A or V button to
select User 1 or User 2.
Press the P button and then use A or 7 button to
select the desired picture option (Contrast,
Brightness, Color. Sharpness. or Tint).
Press the P button and then use 1 or b button to
make appropriate adjustments.
Press EXIT button to return to TV viewing or press
MENU button to return to the previous menu
' Fill/”WEE
mum. Mud-
(clot mmmuuu
7: D
Adam-d
Awm Rana
Flume Reset
wean
mum Made
Color Ympemrure
x0
Advanad
Aspen Ratio
51 mm Rum
Sum
EllgHm-x
color
smmms
Intelligent m
Dynamir
Standard
Mlld
‘mlxvu l>uullllutqur w
my mum mm, nm‘m
n nlmnmu[um-mini n
"IOtllNOD EHfllDId I
57
PICTURE CONTROL
“IOHLNOD 380l3|d I
QGQQO
58
Color Tone -User Mode
You can also adjust the detailed settings(Red, Green. Blue)
by selecting the User menu.
This feature operate only if the picture mode set User 1 or
User 2.
Press the MENU button and then use A or V button
to select the PlCTURF. menu.
Press the b button and then use A or V button to
select Color Temperature
Press the P button and then use A or V button to
select User.
Press the P button and then use A or V button to
select Red. Green. or Blue.
Press the > button and then use 4 or Vbutton to
make appropriate adjustments.
- The adjustment range of Red, Green or Blue
is -20~ +20.
6 Press EXIT button to return to TV viewing or press
MENU button to return to the previous menu.
‘ [mm was
i (olnr Yempeflmue
rxn
' l Auvanud
‘ wen mum
in m re mm
5mm
Picture Mode
“WW (Marla-n lawn-
xn
Advamed
Ass-«x Hallo
‘ mm.- rum
5mm
sum-m.» m a 1 “my.“ k.
rr .. -- rrrrr
XD - PICTURE IMPROVEMENT TECHNOLOGY
XD is LG Electronics unique picture improving technology to display a real HD
source through an digital signal processing algorithm.
When selecting Picture Mode options (Dynamic, Standard and Mild), XD is
automatically change to Auto.
When selecting Picture Mode options (User I and User 2), you can choose
the Auto / Manual and when selecting Manual, you can adjust the X0
Contrast, XD color and XD Noise.
mum Mods
a Press the MENU button and then use A or V button ' -‘ ColarYfimpanture
to select the PICTURE menus _ xn
Admitted
Amen Ruth‘s
mum: Rem
@ Press the 7 button and then use A or V button to We"
select XD.
Press the P butth and then use 1 or > button to
select Auto or Manual.
Plnun: use.
' Selecting the Manual > Manual
is Press the V button and then use A or V button to
select XD Contrast. XD Colnrur XD Noise. ”mm“ ”mm“ “"
Picture mm xn colov &
- XD Contrast : Optimizing the contrast automatically 5m" x“ W“ °" l
according to the bry'itness of the reflection
- XD Color :Adjusting the colors of the reflec-
tion automatically to reproduce as closely as 0 0 0
possible to the natural colors.
- XD Noise : Remfiv-ghmiseupbthepohtmereit
dos not damage the urigiral picture
2. Use the 4 or b button to select On or Off.
0 Press EXIT button to |eturn to TV viewing or press
MENU button to return to the previous menu.
TOtIlNOZ) EHILLDId I
PICTURE CONTROL
ADVANCED -ClNEMA 3:2 PULLDOWN MODE
Set up the TV for the best picture appeaiance for viewing
movies.
This feature is disable only in ROB-PC. HDMII , HDMIZv
HDMIS or Component] .2(except 480i) mode.
When you operate Cinema (3:2 Pull-Down Mode or Cinema
Correction Mode). the TV will adjust 24 fps video from
movies to 30 fps video for display (This function is only
available in TV(Analug, DTV), AV] , AVZ, Component 480i
moder)
Press the MENU button and then use A or V button
to select the PlCTURE menu.
Press the b button and then use A or V button to
select Advanced.
10HLN03 38fl13|d I
Press the P button and then use A or V button to
select Cinema 3:2 Mode.
Press the b button and then use 1 or b button to
select On or OPE
Press EXIT button to return to TV viewingor press
MENU button to return to the previous menu,
60
‘ leue Mode
film/Rf
color ran-palm":
xn
Advanted
WM l
(elm Yanueramrs
w l
7 , qua-m 1 2 was on
mm in", mm um M
Dlnuu mm mm tow
Susan
09°
ADVANCED-BLACK(DARKNESS) LEVEL
Adjusting the contrast and the brightness of the screen
using the black level of the screen.
This feature operates only in HDMI! , HDMIZ, HDMI3 or
AV] , AVZ mode.
mam. mm
Press the MENU button and then use A or V button (nlurhmpuatuvl
to select the PlCTURE menu. ‘ ‘ W
Advamld
Aspklflntlu
Pictuwflqzct
Press the P button and then use A or V butwn to “m"
select Advanced.
Press the b button and then use A or 7 button to
select Black level.
hm": mm
(nlnr Tsmpsmtwe
' primal
‘ 1 KB
Press the b button and then use 4 or b button to
select Lowerigh.
. Axpln an“
mm. new
Screen
- Low
The reflection of the screen gets darker.
- High
The reflection of the screen gets brighter.
Press EXIT button to return to TV viewing or press
MENU button to return to the previous menu.
- clmfi-zmm uni
m level
mm
000
iOHlNOD EHFLLDId I
6]
PICTURE CONTROL
TOHLNOI) HHHLDId I
62
ADVANCED -TRUM
(Only 32/37/42LB4D models)
Set up the TV for best picture with film judder canzellation that pro-
vides stunningly steady movements
This feature is disable in ROB-PC, HDMI-PC made.
And when HDMI is set to the PC in Input Label. TruM is also dis-
Press the MENU button and then use A or V button
to select the PICTURE menu,
select Advanced.
Press the P button and then use A or 7 button to
select TruM.
Press the P button and then use 1 or P button to
select Off, LonerHigh.
9 Press the b button and then use A or 7 button to
- Low
Set amount of filmjudder to law.
1 High
Set amount oifilln judder to high.
‘ Ii you have some problem in viewing picture. set
TruM to Lower Off,
6 Press EXIT button to return to TV vrewingor press
MENU button to return to the previous menu,
Mum Moan
Color Yemveratuys
xn
Advanced
mm Ram:
Plume nut
5am
Pldwe u we
Calm rumwamre
xu
A u «Kt-l
Aspeuflaue
pm" um
5mm-
. Gm mm. m
mm lwll
TruM
Low
ngh i
000
PICTURE RESET
Use to quickly reset all the Picture menu options to their origi-
nal factory preset values.
a Press the MENU button and then use A or V button
to select the PlCTURE menu.
a Press the P button and then use A or 7 button to
select Picture Reset
a Press the P button to reset the Picture menu options
to original values,
WM
mum Mu du
(film hmpmm.
xo
Adm-mud
“pm mm,
mm We“!
SUeen
mm Mode
Calm Yuma-ram"
x0
Am med
"mm- 1»
mm mun-Maw,»
on.
iOHlNOD EHFLLDId I
63
"IOHLNOD 33VflDNV1 7 GNnOS I
SOUND & LANGUAGE CONTROL
AUTO VOLUME LEVELER(AUTO VOLUME )
Scans for changes in sound levels during commercials, then
adjusts the sound to match the specified audio level. Auto
Volume makes sure that the volume level remains consistent
whether you are watching a commercial or a regular TV pm-
gram‘
sot-mamas
Press the MENU button and then use A or 7 button “mm“,
to select the AUDIO menu. ‘ hum
w 5mm
Press the b button and then use A or V button to
select Auto Volume.
Press the P button and then use A or V button to
select On or Off.
sauna Made
- r A“ haiunn
vv speak-a
Press EXIT button to return to TV viewing or press
MENU button to return to the previous menu
PRESET SOUND SETTINGS (Sound Mode)
Sound Mode lets you enjoy the best sound without any special
adjustment because the TV sets the appropriate sound options
based on the program content.
Standard, Music, Movie, Sports and User are preset for good
sound quality at the factory and are not adjustable.
“ Press the SOUND button repeatedly to select the appropriate sound
setup as shown below :
Standard, Music, Movie, Sports and User (your own settings).
a Press EXIT button to return to TV viewing.
I You can also adjust Sound Mode in the AUDIO menu,
sound Mode star-mm
Auto volume on ’ i AmnValum-
Ezlanen a M...“
rvsmku On rvspamv
4 Standard
Mum
mum
snafu
Um
"IOHLNOD EIDVI’IDNVI l? GNflOS I
65
SOUND & LANGUAGE CONTROL
SOUND SETTING ADJUSTMENT-USER MODE
Adjust the sound to suit your taste and room situations.
Press the MENU button and then use A or 7 button
to select the AUDIO menu.
Press the b button and then use A or 7 button to
select Sound Mode.
Press the b human and then use A or 7 button to
select User.
Press the P button and then use A or V button to
select the desired sound option (Treble, Bass ,or
Front Surround ).
"IOHLNOD 33VflDNV1 7 GNflOS I
66
mm: Mode
Auto Mm...
w'l 0st
p ‘UEW ‘ Trabln
l um
mm: Surround
Standard
Musk
Maul-
Snails
mum m 1! saw. u,
r»,- «mulled my“. lug-m
000
9 Press the b button and then use 1 or P button to
make applopriate adjustments.
' Selecting the Front Surround
Press the P button and then use Q or 5 button to
select Off, ID EchoSuund System or SRS (Sound
Retrieval System)Tru5urchnd XT.
6 Press EXlT button to return to TV viewing or press
MENU button to return to the previous menu.
SRS TruSurround XT
Takes advantage Dt'any multi~channe| format without
needing to add extra speakers or equipment. Dialog
clarity, bass enrichment. and the addition of stereo
audio enhancement produces an immersive sound
experience from standard stereo material.
SD EchaSound System
Creates a stunning simulated stereo effect from any
mono sound and a realistic thee-dimensional sound
with a very wide and deep sound stage.
. 41mm
mm su'muml
4 50 alwsumismem
"IOtllNOD EDVnDNV'l 1? GNflOS I
67
SOUND & LANGUAGE CONTROL
"IOHLNOD EDVflDNVI 7 GNnOS I
68
BALANCE
Adjust the left/right sound of speaker to suit your taste and
room situations
Sound Mane
Press the MENU button and then use A or V button . Mom“,
to select the AUDIO menu. " ' » Galina:
rv 5mm
Press the P button and then use A or V button to
select Balance.
Press the b button and then use 4 or P button to
make appropriate adjustments, 5m“ “We
mm V-flume
sum.
rv Spnkw
Press EXIT button to return to TV viewing or mess
MENU button to return to the previous menu.
a 4mm
smmam
an
On
mun n,
STEREO/SAP BROADCAST SETUP
This TV can receive MTS stereo programs and any SAP
(Secondary Audio Program) that accompanies the stereo pro-
gram it the station tiansmits an additional sound signal as well
as the original one and when you select Stereo or SAP on the
remote control.
Mono sound is automatically received if the broadcast is only in
Mono; even though Stereo or SAP has been selected.
Select Mono ifyou want to listen to the mono sound in remote
areas during stereo/SAP broadcasting.
Stereo or SAP can be received in Analog channel.
0 Use the SAP button to select your desired MTS modem analog signals Each
time you press the SAP button. Mono, Stereo. or SAP appear in turn,
I If other languages available on the digital signal. select them with the SAP
buttons
9 Press EXIT button to save and return to TV viewing.
"IOHLNOD EDVnDNVT ’8 GNnOS I
69
SOUND & LANGUAGE CONTROL
"IOHlNOD 33VflDNV1 7 GNflOS I
70
TV SPEAKERS ON/OFF SETUP
Turn the TV speakers off if using external audio equipment.
Feature turns the TV Speakers option On or Offr
Press the MENU button and then use A or V button
to select the AUDIO menu.
Press the b button and then use A or V button to
select TV Speaker,
Press the b button and then use A or 7 button to
select Onor Off.
Press EXIT button to return to TV viewing or press
MENU button to return to the previous menu.
Sound M nun
Autn Volumn
sound Mode
Auto whim.
him in
sunam
On
On
AUDIO LANGUAGE
Other languages may be available ifa digital signal is provided
by the broadcasting station.
This feature operate only in DTV/CADTV mode.
tang-4.795
Press the MENU button and then use A or 7 button mpuv um:
to select the OPTION menu. ' 7 smwtmlr.
Xv; ludt
(aption
sew)
Press the P button and then use A or 7 button to
select Language.
Press the b button and then use A or 7 button to
select Audio.
ms
‘- lnnm mm
Press the b button and then use 4 or P button to SlmpNM
select : English, Spanish, or French. m with
w v.
" ‘ mono"
sq m
Press EXIT button to return to TV viewing or press
MENU button to return to the previous menu.
lnnwnqe
Input tabel
SimDUnk
Kev mt
Cannon
sen m
"IOHLNOD aovnouw 19 GNflOS I
71
SOUND & LANGUAGE CONTROL
"IOHLNOD HDVflDNVl 7 GNI’IOS I
72
ON-SCREEN MENUS LANGUAGE SELECTION
The menus can be shown on the screen in the selected
language. First seleet your language.
Press the MENU button and then use A or V but-
ton to select the OPTION menu.
Press the P button and then use A or V button to
select Language,
Press the 5 button and then use A or 7 button to
select Menu.
Press the P button and then use 4 or P button
to select your desired language}
From this point on. the onscreen menus will be
shown in the selected language.
Press EXIT button to return to TV viewrng or press
MENU button to return to the previous menu.
m vwr
unqu-w
mpm Lane]
Srmphnk
m to button and then use 1 or > button to mun.
select Custom. . m Lock
arnmv “pm"
SEND
9 Use A or V button to customize the Style, Font,
etc. to your preference.
A preview icon is provided at the bottom of the
screen. use |t to see the caption language.
“amt-mum“. m m.
mm m-
TOHlNOD BDVHDNW “8 GNI’IOS I
l Size: Set the size the words will appear in.
- Font: Select a typeface For the words,
Language
- Text Color: Choose a color for the text. . lnwl rm. inn <_ .
- Text Opacity: Specify the opacity for the text color U 2293: if“
- Bg (Background)Color. Select a background color mnw , “Nah" MM
. r ‘ Tennpadty %
- Bg (Background)0paclty: Select the opac|ty for Egcolm izlflj
, x n my sum
the background color. 5:11:an WIS]
l Edge Type: Select an edge type. Edge («or arm
I Edge Color: Select a color for the edges.
6 Press EXIT button to return to TV viewing or press
0 9
MENU button to return to the previous menu.
76
TIME SETTING
CLOCK SETTING
Auto Clock Setup
The time is set automatically from a digital channel signal.
The digital channel signal includes information for the current
time provided by the broadcasting station.
Set the clock manually if the current time is set incorrectly by
the auto clock function.
Press the MENU button and then use A or V button
to select the TIME menu.
Press the P button and then use A or 7 button to
select Clock
Press the b button and then use A or 7 button to
select Auto
Press the P button and then use A or V button to
select your viewing area time zone :
USA : Eastern, Central, Mountain. Pacific, Alaska or
Hawaii.
Canada : Eastern Central, Mountain, Pacific,
New ”and or Atlantic.
Press the b button and then use A or V button to
select Auto, Off, On, depending on whether or not
your viewing area observes Daylight Saving time.
Press EXIT button to return to TV viewing or press
MENU button to return to the previous menu.
ow.
off limo
on Tim:
Slm rime
Auto sun;
on nm
on m.
Slaw lime
Auto 5 gen
cm “we
on Hm!
SINp m...
Auto sum
mr
um
mt .
m..- wm inst-m
Mum
Saturn Aura
mm Hm}
pm...
SDVIW Am i
0000
DNILHS awu I
77
TIME SETTING
DNIlHS 3WIJ. I
78
Manual Clock Setup
If the current time setting is wrong, reset the clock manually.
Press the MENU buttnn and then use A or V button
to select the TIME menu.
Press the P button and then use A or 7 button to
select Clock
Press the b button and then use A or V button to
select Manual.
Press the b button and then use 1 or b button to
select either the year. date. or time option. Once
selected, use the A or V button to set the year, date,
and time options.
Press EXIT button to return to TV viewing or press
MENU button to return to the previous menu.
(1 m
on Time
On 14m
Slew Vin-e
Auto Slaw
(hm.
on w...
an Tlma
«use run.
Auto Nina
om? ms can-um
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf Linearized : No Page Count : 40 PDF Version : 1.6 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:94efa5ac-1e1c-451e-b814-8b084daeb294 Modify Date : 2007:03:14 14:06:09+09:00 Create Date : 2007:03:14 14:05:40+09:00 Metadata Date : 2007:03:14 14:06:09+09:00 Document ID : uuid:d4c97aa1-19a3-49e2-98c4-0d4e1e83ac58 Format : application/pdf Creator : Adobe Acrobat 7.0 Producer : Adobe Acrobat 7.0 Image Conversion Plug-inEXIF Metadata provided by EXIF.tools