LG Electronics USA 42LD450CUA LCD TV/MONITOR User Manual LD452C LD451C UA manual 1005

LG Electronics USA LCD TV/MONITOR LD452C LD451C UA manual 1005

Contents

User Manual-1

PREPARATIONPREPARATION28VESA WALL MOUNTINGInstall your wall mount on a solid wall perpendicular to the floor. When attaching to other building mate-rials, please contact your nearest installer.If installed on a ceiling or slanted wall, it may fall and result in severe personal injury.We recommend that you use an LG brand wall mount when mounting the TV to a wall.LG recommends that wall mounting be performed by a qualified professional installer.ModelVESA (A * B)ABStandard Screw Quantity Wall Mounting Bracket(sold separately)19LE5300,22LE5300,22LE5500,26LE5300,26LE5500100 * 100 M4 4LSW100B, LSW100BG 32LE5300,32LD420, 32LD450,32LD520, 32LD452C200 * 100 M4 4LSW100B, LSW100BG37LE5300,37LD450, 37LD450C,37LD452C, 42LE5300,42LE530C,42LE7300,42LD450, 42LD450C,42LD420,42LD520,42LD630,42LD451C,42LD452C47LE5300,47LE530C,47LE7300,47LD450,47LD450C,47LD420, 47LD520,47LD630,47LD451C, 47LD452C200 * 200 M6 4LSW200B, LSW200BG 55LE5300,55LE530C,55LE7300,55LD520, 55LD520C,55LD630400 * 400 M6 4LSW400B, LSW400BG, DSW400BG
29PREPARATIONCAUTIONŹ Do not install your wall mount kit while your TV is turned on. It may result in personal injury due to electric shock.!NOTE Ź Screw length needed depends on the wall mount used. For further information, refer to the instructions included with the mount.Ź Standard dimensions for wall mount kits are shown in the table.Ź When purchasing our wall mount kit, a detailed installation manual and all parts necessary for assembly are provided.Ź Do not use screws longer than the standard dimension, as they may cause damage to the inside to the TV.Ź For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may differ depending on their specifications.Ź Do not use screws that do not comply with the VESA standard screw specifications. Do not use fasten the screws too strongly, this may damage the TV or cause the TV to a fall, leading to personal injury. LG is not liable for these kinds of accidents.Ź LG is not liable for TV damage or personal injury when a non-VESA or non specified wall mount is used or the consumer fails to follow the TV installation instructions.Place the ring spacers on the set before installing the wall mounting bracket so that the inclination of the backside of the set can be adjusted perpendicularly.For 26LE5300, 26LE55004-RING SPACERS
PREPARATIONPREPARATION3032/37/42/47LD450, 37/42/47LD450C, 32/42/47LD420, 32/42/47/55LD520, 55LD520C, 42/47/55LD630, 42/47LD451C, 32/37/42/47LD452CCABLE MANAGEMENTᯫ Image shown may differ from your TV.Connect the cables as necessary.To connect additional equipment, see the EXTERNAL EQUIPMENT SETUP section.For 37/42/47LD450C, 55LD520C, 32/37/42/47LD452C: Secure the power cord with the PROTECTIVE BRACKET/SCREW on the TV back cover. It will help prevent the power cable from being removed by accident.Open the CABLE MANAGEMENT CLIP as shown.Put the cables inside the CABLE MANAGEMENT CLIP and snap it closed.CABLE MANAGEMENT CLIPPROTECTIVE BRACKET/SCREW
31PREPARATIONCABLE HOLDERCABLE HOLDER2After connecting the cables as necessary, install the CABLE HOLDER as shown and bundle the cables.1Secure the power cord with the CABLE HOLDER on the TV back cover. It will help prevent the power cable from being removed by accident.32/37/42/47/55LE5300, 42/47/55LE530C42/47/55LE730019/22/26LE5300, 22/26LE5500After connecting the cables as necessary, install the CABLE HOLDER as shown and bundle the cables. 1 Install the CABLE MANAGEMENT CLIP as shown.2Connect the cables as necessary.To connect additional equipment, see the EXTERNAL EQUIPMENT SETUP section.1Connect the cables as necessary.To connect additional equipment, see the EXTERNAL EQUIPMENT SETUP section.Install CABLE HOLDER as shown and bundle the cables.CABLE HOLDERFOR DESK-TYPE STAND FOR WALL MOUNTCABLE MANAGEMENT CLIPCABLE HOLDER
PREPARATIONPREPARATION32DESKTOP PEDESTAL INSTALLATIONSWIVEL STAND (Except 19/22LE5300, 22LE5500)After installing the TV, you can adjust the TV set manually to the left or right direction by 20 º to suit your viewing position.ᯫ Image shown may differ from your TV.For proper ventilation, allow a clearance of 10.1 cm (4 inch) on all four sides from the wall.10.1 cm (4 inch)10.1 cm (4 inch)10.1 cm (4 inch)10.1 cm (4 inch)CAUTIONŹ Ensure adequate ventilation by following the clearance recommendations.Ź Do not mount near or above any type of heat source.KENSINGTON SECURITY SYSTEMᯫ This feature is not available for all models.- The TV is equipped with a Kensington Security System con-nector on the back panel. Connect the Kensington Security System cable as shown below.- For the detailed installation and use of the Kensington Security System, refer to the user’s guide provided with the Kensington Security System. For further information, contact http://www.kensington.com, the internet homepage of the Kensington company. Kensington sells security systems for expensive electronic equipment such as notebook PCs and LCD projectors.NOTE: The Kensington Security System is an optional accessory.
33PREPARATIONATTACHING THE TV TO A DESK(For 32/42LD420, 32/37/42LD450, 37/42LD450C, 32/42LD520, 42LD630, 32LE5300, 42LD451C, 32/37/42LD452C) The TV must be attached to a desk so it cannot be pulled in a forward/backward direction, poten-tially causing injury or damaging the product. ᯫ Image shown may differ from your TV.1-Screw ( provided as parts of the product)DeskStandWARNINGŹ To prevent TV from falling over, the TV should be securely attached to the floor/wall per installa-tion instructions. Tipping, shaking, or rocking the machine may cause injury.4-Screws(not provided as parts of the product)DeskStandFor 37/42/47LD450C, 32/37/42/47LD452CŹ Recommended screw size: M5 x L (*L: Table depth + 8~10 mm) ex) Table depth: 15mm, Screw: M5 x 25For 55LD520C4-Screws(not provided as parts of the product)
PREPARATIONPREPARATION34SECURING THE TV TO THE WALL TO PREVENT FALLING WHEN THE TV IS USED ON A STAND We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards. Additionally, we recommend that the TV be attached to a wall so it cannot be pulled in a forward direction, potentially causing injury or damaging the product. Caution: Please make sure that children don’t climb on or hang from the TV. ᯫInsert the eye-bolts (or TV brackets and bolts) to tighten the product to the wall as shown in the picture. * If your product has the bolts in the eye-bolts position before inserting the eye-bolts, loosen the bolts. * Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes. Secure the wall brackets with the bolts (sold separately) to the wall. Match the height of the bracket that is mounted on the wall to the holes in the product. Ensure the eye-bolts or brackets are tightened securely.ᯫ Use a sturdy rope (sold separately) to tie the product. It is safer to tie the rope so it becomes horizontal between the wall and the product.ᯫ You should purchase necessary components to prevent the TV from tipping over (when not using a wall mount).ᯫ Image shown may differ from your TV.!NOTEŹ Use a platform or cabinet strong enough and large enough to support the size and weight of the TV.Ź To use the TV safely make sure that the height of the bracket on the wall and the one on the TV are the same.
35PREPARATIONANTENNA OR CABLE CONNECTIONᯫ To prevent damage do not connect to the power outlet until all connections are made between the devices.ᯫ Image shown may differ from your TV.1. Antenna (Analog or Digital) Wall Antenna Socket or Outdoor Antenna without a Cable Box Connections. For optimum picture quality, adjust antenna direction if needed.2. CableWall Antenna SocketOutdoor Antenna (VHF, UHF)Cable TV Wall JackMulti-family Dwellings/Apartments(Connect to wall antenna socket)RF Coaxial Wire (75 Ω)RF Coaxial Wire (75 Ω)Single-family Dwellings /Houses(Connect to wall jack for outdoor antenna)Be careful not to bend the copper wire when connecting the antenna.Copper Wireᯫ If the antenna needs to be split for two TV’s, install a 2-Way Signal Splitter.ᯫ For much more information about antennas visit our Knowledgebase at http://lgknowledgebase.com. Search for antenna.ANTENNA/CABLE INANTENNA/CABLE IN
EXTERNAL EQUIPMENT SETUPEXTERNAL EQUIPMENT SETUP36HD RECEIVER SETUPᯫ To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment.ᯫ IThis part of EXTERNAL EQUIPMENT SETUP mainly use picture of for 26LE5300/26LE5500.Y, C B/PB, CR/PR1. How to connect1Connect the video outputs (Y, P B, PR) of the digital set-top box to the COMPONENT IN VIDEO or 1/2* jacks on the TV. Match the jack colors (Y = green, PB = blue, and PR = red).2Connect the audio output of the digital set-top box to the COMPONENT IN AUDIO or 1/2* jacks on the TV.2. How to useᯫ Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box operation.) ᯫ Select the Component or Component1/2* input source on the TV using the INPUT button on the remote control.Component ConnectionThis TV can receive digital over-the-air/digital cable signals without an external digital set-top box. However, if you do receive digital signals from a digital set-top box or other digital external device.Resolution Horizontal Frequency(kHz)Vertical Frequency(Hz)720x480i 15.73 59.9415.73 60.00720x480p 31.47 59.9431.50 60.001280x720p 44.96 59.9445.00 60.001920x1080i33.72 59.9433.75 60.001920x1080p26.97 23.97627.00 24.0033.71 29.9733.75 30.0067.432 59.9467.50 60.00EXTERNAL EQUIPMENT SETUPANTENNA/CABLE INGB IN (PC)AUDIO INRGB/DVIVI)OPTICAL DIGITALAUDIO OUTAV INRS-232C IN(CONTROL&SERVICE)12VIDEOAUDIOL(MONO)RVIDEO AUDIOYPBPRL RCOMPONENT INY L RPBPR1 2* Component2: For 32/37/42/47/55LE5300, 42/47/55LE7300, 42/47/55LE530CUSB ININ 4H/PAV IN2VIDEO / AUDIOY PB PR / AUDIO COMPONENT IN2Y LRPBPRFor 32/37/42/47/55LE5300, 42/47/55LE7300, 42/47/55LE530C12
37EXTERNAL EQUIPMENT SETUPHDMI Connection1. How to connect1Connect the digital set-top box to HDMI/DVI IN 1, 2, 3*, or 4** jack on the TV.2No separate audio connection is necessary.HDMI supports both audio and video.2. How to useᯫ Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.) ᯫ Select the HDMI1, HDMI2, HDMI3*, or HDMI4** input source on the TV using the INPUT button on the remote control.!NOTEŹ If an HDMI cable doesn’t support High Speed HDMI, it can cause flickers or no screen display. In this case use the latest cables that support High Speed HDMI.Ź HDMI Audio Supported Format: Dolby Digital (32 kHz, 44.1 kHz, 48 kHz), Linear PCM (32 kHz, 44.1 kHz, 48 kHz)HDMI-DTVResolution Horizontal Frequency(kHz)Vertical Frequency(Hz)720x480p 31.47 59.9431.50 60.001280x720p 44.96 59.9445.00 60.001920x1080i33.72 59.9433.75 60.001920x1080p26.97 23.97627.00 24.0033.71 29.9733.75 30.0067.432 59.9467.50 60.00DC-INRGB IN (PC)AUDIO INRGB/DVIOPTICAL DIGITALAUDIO OUTCOMPONENT INAV INRS-232C IN(CONTROL&SERVICE)VIDEOAUDIOL(MONO)RVIDEO AUDIOYPBPRL R(DVI)/DVI IN1 2HDMI OUTPUT1* HDMI3: For 26LE5300, 26LE5500, 32/42/47/55LD520, 55LD520C, 42/47/55LD630** HDMI4: For 32/37/42/47/55LE5300, 42/47/55LE7300, 42/47/55LE530C
EXTERNAL EQUIPMENT SETUPEXTERNAL EQUIPMENT SETUP38DVI to HDMI Connection1. How to connect1Connect the DVI output of the digital set-top box to the HDMI/DVI IN 1 or 2* jack on the TV.2Connect the digital set-top box audio output to the AUDIO IN (RGB/DVI) jack on the TV.2. How to useᯫ Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.) ᯫ Select the HDMI1 or HDMI2* input source on the TV using the INPUT button on the remote control.!NOTEŹ A DVI to HDMI cable or adapter is required for this con-nection. DVI doesn't support audio, so a separate audio connection is necessary.DC-INRGB IN (PC)AUDIO INRGB/DVIOPTICAL DIGITALAUDIO OUTCOMPONENT INAV INRS-232C IN(CONTROL&SERVICE)VIDEOAUDIOL(MONO)RVIDEO AUDIOYPBPRL R(DVI)/DVI IN12L R DVI OUTPUTAUDIO12* HDMI2: For 32/42/47/55LD520, 55LD520C, 42/47/55LD630
39EXTERNAL EQUIPMENT SETUPDVD SETUPComponent Input portsTo get better picture quality, connect a DVD player to the component input ports as shown below.1. How to connect1Connect the video outputs (Y, P B, PR) of the DVD to the COMPONENT IN VIDEO or 1/2* jacks on the TV. Match the jack colors (Y = green, PB = blue, and PR = red).2Connect the audio outputs of the DVD to the COMPONENT IN AUDIO or 1/2* jacks on the TV.2. How to useᯫ Turn on the DVD player, insert a DVD.ᯫ Select the Component or Component1/2* input source on the TV using the INPUT button on the remote control.ᯫ Refer to the DVD player’s manual for operating instructions.Component Connection Component ports on the TVYPBPRVideo output ports on DVD playerYPBPRYB-YR-YYCbCrYPbPrANTENNA/CABLE INRGB IN (PC)AUDIO INRGB/DVI(DVI)OPTICAL DIGITALAUDIO OUTAV INRS-232C IN(CONTROL&SERVICE)1 2VIDEOAUDIOL(MONO)RVIDEO AUDIOYPBPRL RCOMPONENT INY L RPBPR12USB ININ 4H/PAV IN2VIDEO / AUDIOY PB PR / AUDIO COMPONENT IN2Y LRPBPRFor 32/37/42/47/55LE5300, 42/47/55LE7300, 42/47/55LE530C12* Component2: For 32/37/42/47/55LE5300, 42/47/55LE7300, 42/47/55LE530C
EXTERNAL EQUIPMENT SETUPEXTERNAL EQUIPMENT SETUP40Composite (RCA) Connection1. How to connect1Connect the AUDIO/VIDEO jacks between TV and DVD. Match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red)2. How to useᯫ Turn on the DVD player, insert a DVD.ᯫ Select the AV or AV1/2* input source on the TV using the INPUT button on the remote control. ᯫ Refer to the DVD player's manual for operating instructions.ANTENNA/CABLE INGB IN (PC)AUDIO INRGB/DVIDVI)OPTICAL DIGITALAUDIO OUTCOMPONENT INRS-232C IN(CONTROL&SERVICE)12VIDEO AUDIOYPBPRL RAV INVIDEOAUDIOL(MONO)RL RVIDEOAUDIODC-INRGB IN (PC)AUDIO INRGB/DVIOPTICAL DIGITALAUDIO OUTCOMPONENT INAV INRS-232C IN(CONTROL&SERVICE)VIDEOAUDIOL(MONO)RVIDEO AUDIOYPBPRLR(DVI)/DVI IN1 2HDMI OUTPUT11HDMI Connection1. How to connect1Connect the HDMI output of the DVD to the HDMI/DVI IN 1, 2, 3*, or 4** jack on the TV.2No separate audio connection is necessary.HDMI supports both audio and video.2. How to useᯫ Select the HDMI1, HDMI2, HDMI3*, or HDMI4** input source on the TV using the INPUT button on the remote control.ᯫ Refer to the DVD player's manual for operating instructions.!NOTEŹ If an HDMI cable doesn’t support High Speed HDMI, it can cause flickers or no screen display. In this case use the latest cables that support High Speed HDMI.Ź HDMI Audio Supported Format: Dolby Digital (32 kHz, 44.1 kHz, 48 kHz), Linear PCM (32 kHz, 44.1 kHz, 48 kHz)* AV2: Except 19/22/26LE5300, 22/26LE5500* HDMI3: For 26LE5300, 26LE5500, 32/42/47/55LD520, 55LD520C, 42/47/55LD630** HDMI4: For 32/37/42/47/55LE5300, 42/47/55LE7300, 42/47/55LE530C
41EXTERNAL EQUIPMENT SETUPVCR SETUPAntenna ConnectionNNAUDIOO)RAUDIOL RANTENNA/CABLE INL RS-VIDEO VIDEOAUDIOOUTPUTSWITCHANT INANT OUTWall JackAntenna1. How to connect1Connect the RF antenna out socket of the VCR to the ANTENNA/CABLE IN socket on the TV.2Connect the antenna cable to the RF antenna in socket of the VCR.2. How to useᯫ Set VCR output switch to 3 or 4 and then tune TV to the same channel num-ber.ᯫ Insert a video tape into the VCR and press PLAY on the VCR (Refer to the VCR owner’s manual).12Composite (RCA) ConnectionANTENNA/CABLE INB IN (PC)AUDIO INRGB/DVIVI)OPTICAL DIGITALAUDIO OUTCOMPONENT INRS-232C IN(CONTROL&SERVICE)2VIDEO AUDIOYPBPRL RAV INVIDEOAUDIOL(MONO)RS-VIDEOOUTPUTSWITCHANT INANT OUTL RVIDEOAUDIO1. How to connect1Connect the AUDIO/VIDEO jacks between TV and VCR. Match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red)2. How to useᯫ Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.) ᯫ Select the AV or AV1/2* input source on the TV using the INPUT button on the remote control. !NOTEŹ If you have a mono VCR, connect the audio cable from the VCR to the AUDIO L(MONO) jack of the TV.1* AV2: Except 19/22/26LE5300, 22/26LE5500
EXTERNAL EQUIPMENT SETUPEXTERNAL EQUIPMENT SETUP42OTHER A/V SOURCE SETUPANTENNA/CABLE INDC-INRGB IN (PC)AUDIO INRGB/DVI(DVI)OPTICAL DIGITALAUDIO OUT/DVI INCOMPONENT INRS-232C IN(CONTROL&SERVICE)1 2VIDEO AUDIOYPBPRL RAV INVIDEOAUDIOL(MONO)RL RVIDEOCamcorderVideo Game Set1. How to connect1Connect the AUDIO/VIDEO jacks between TV and external equipment. Match the jack colors.(Video = yellow, Audio Left = white, and Audio Right = red)2. How to useᯫ Select the AV or AV1/2* input source on the TV using the INPUT button on the remote control.ᯫ Operate the corresponding external equipment.1* AV2: Except 19/22/26LE5300, 22/26LE5500
43EXTERNAL EQUIPMENT SETUPUSB CONNECTIONUSB ININ 3H/PMemory Keyor1. How to connect1 Connect the USB device to the USB IN jack on the side of TV. 2. How to useᯫ After connecting the USB IN jack, you use the USB function. (Źp.78)HEADPHONE SETUP (Except 37/42/47LD450C, 32/37/42/47LD452C)H/PYou can listen to the sound through the headphone.1. How to connect1Plug the headphone into the head-phone socket.2To adjust the headphone volume, press the VOL +/- button. If you press the MUTE button, the sound from the headphone is switched off.!NOTEŹ AUDIO menu options are disabled when connecting a headphone.Ź When changing AV MODE with a headphone con-nected, the change is applied to video but not to audio.Ź Optical Digital Audio Out is not available when con-necting a headphone.
EXTERNAL EQUIPMENT SETUPEXTERNAL EQUIPMENT SETUP44ANTENNA/CABLE INRGB IN (PC)AUDIO INRGB/DVI(DVI)/DVI INCOMPONENT INAV INRS-232C IN(CONTROL&SERVICE)1 2VIDEOAUDIOL(MONO)RVIDEO AUDIOYPBPRL ROPTICAL DIGITALAUDIO OUTAUDIO OUT CONNECTIONSend the TV’s audio to external audio equipment via the Audio Output port.If you want to enjoy digital broadcasting through 5.1-channel speakers, connect the OPTICAL DIGITAL AUDIO OUT terminal on the back of TV to a Home Theater (or amp). !NOTEŹ When connecting with external audio equipment, such as amplifiers or speakers, you can turn the TV speakers off in the menu. (Źp.119)CAUTIONŹ Do not look into the optical output port. Looking at the laser beam may damage your vision.Ź Audio with ACP (Audio Copy Protection) function may block digital audio output.1. How to connect1Connect one end of the optical cable to the TV port of OPTICAL DIGITAL AUDIO OUT.2Connect the other end of the optical cable to the digital audio input on the audio equip-ment.3Set the “TV Speaker option - Off” in the AUDIO menu. (Źp.119). See the external audio equipment instruction manual for operation.12
45EXTERNAL EQUIPMENT SETUPDC-IN(DVI)OPTICAL DIGITALAUDIO OUT/DVCOMPONENT INAV INRS 232C IN(CONTROL&SERVICE)VIDEOAUDIOL(MONO)RVIDEO AUDIOYPBPRLRGB IN (PC)AUDIO INRGB/DVIRGB OUTPUT AUDIOPC SETUPThis TV provides Plug and Play capability, meaning that a PC adjusts automatically to the TV’s set-tings. 1. How to connect1Connect the VGA output of the PC to the RGB IN (PC) jack on the TV.2Connect PC audio output to the AUDIO IN (RGB/DVI) jack on the TV.2. How to useᯫ Turn on the PC and the TV.ᯫ Select the RGB-PC input source on the TV using the INPUT button on the remote control.VGA (D-Sub 15 Pin) Connection1 2
EXTERNAL EQUIPMENT SETUPEXTERNAL EQUIPMENT SETUP46DVI to HDMI Connection1. How to connect1Connect the DVI output of the PC to the HDMI/DVI IN 1 or 2* jack on the TV.2Connect the PC audio output to the AUDIO IN (RGB/DVI) jack on the TV.2. How to useᯫ Turn on the PC and the TV.ᯫ Select the HDMI1 or HDMI2* input source on the TV using the INPUT button on the remote control.DC-INRGB IN (PC)AUDIO INRGB/DVIOPTICAL DIGITALAUDIO OUTCOMPONENT INAV INRS-232C IN(CONTROL&SERVICE)VIDEOAUDIOL(MONO)RVIDEO AUDIOYPBPRL R(DVI)/DVI IN12DVI OUTPUTAUDIO12* HDMI2: For 32/42/47/55LD520, 55LD520C, 42/47/55LD630
47EXTERNAL EQUIPMENT SETUPSupported Display Specifications (RGB-PC, HDMI-PC)!NOTEŹTo get the the best picture quality, adjust the PC graphics card to 1360 x 768 (19/22/26LE5300, 22/26LE5500) or 1920 x 1080 (Other models).ŹDepending on the graphics card, DOS mode may not work if a HDMI to DVI Cable is in use.ŹIn PC mode, there may be noise associated with the resolution, vertical pattern, contrast or bright-ness. If noise is present, change the PC output to another resolution, change the refresh rate to another rate or adjust the brightness and contrast on the PICTURE menu until the picture is clear.ŹAvoid keeping a fixed image on the screen for a long period of time. The fixed image may become permanently imprinted on the screen.ŹThe synchronization input form for Horizontal and Vertical frequencies is separate.ŹDepending on the graphics card, some resolution settings may not allow the image to be posi-tioned on the screen properly.ŹWhen selecting HDMI-PC, set the “Input Label - PC” in the OPTION menu. Resolution Horizontal Frequency(kHz)Vertical Frequency(Hz)640x350 31.468 70.09720x400 31.469 70.08640x480 31.469 59.94800x600 37.879 60.311024x768 48.363 60.001280x768 47.776 59.871360x76847.712 60.0151280x102463.981 60.021600x120075.00 60.001920x1080RGB-PC66.587 59.9341920x1080HDMI-PC67.50 60.00Except 19/22/26LE5300, 22/26LE5500Except 32/37/42/47/55LE5300, 42/47/55LE7300, 42/47/55LE530C
EXTERNAL EQUIPMENT SETUPEXTERNAL EQUIPMENT SETUP48Screen Setup for PC modeYou can choose the resolution in RGB-PC mode.The Position, Phase, and Size can also be adjusted.You can choose this option only when the PC resolution is set to 1024X768, 1280X768 or 1360X768.Selecting Resolution1MENUSelect PICTURE.2ENTERSelect Screen (RGB-PC).3ENTERSelect Resolution.4ENTERSelect the desired resolution.5ENTER3,&785( ᯒ0RYHᯙ(QWHU  ؒ%ULJKWQHVV  ؒ6KDUSQHVV  ؒ&RORU   ؒ7LQW   ؒ&RORU7HPS   ؒ$GYDQFHG&RQWURO  ؒ3LFWXUH5HVHWؒ 6FUHHQ5*%3&5*:&ᯙᯰᯡ[۳[۳[$XWR&RQILJ5HVROXWLRQ3RVLWLRQ6L]H3KDVH5HVHW6&5((1ᯒ0RYHᰙ3UHY
49EXTERNAL EQUIPMENT SETUPAutomatically adjusts picture position and minimizes image instability. After adjustment, if the image is still not correct, try using the manual settings or a different resolution or refresh rate on the PC.Auto Configure1MENUSelect PICTURE.2ENTERSelect Screen (RGB-PC).3ENTERSelect Auto Config..4ENTERSelect Yes .5ENTERStart Auto Configuration.ᯫ If the position of the image is still not correct, try Auto adjustment again.ᯫ If picture needs to be adjusted again after Auto adjustment in RGB-PC, you can adjust the Position, Size or Phase.3,&785( ᯒ0RYHᯙ(QWHU  ؒ%ULJKWQHVV  ؒ6KDUSQHVV  ؒ&RORU   ؒ7LQW   ؒ&RORU7HPS   ؒ$GYDQFHG&RQWURO  ؒ3LFWXUH5HVHWؒ 6FUHHQ5*%3&5*:&ᯙᯰ$XWR&RQILJ5HVROXWLRQ3RVLWLRQ6L]H3KDVH5HVHW$XWR&RQILJ<HV 1R6&5((1ᯒ0RYHᰙ3UHY
EXTERNAL EQUIPMENT SETUPEXTERNAL EQUIPMENT SETUP50If the picture is not clear after auto adjustment or if text is shaking, adjust the picture phase manually.This feature operates only in RGB-PC mode.Adjustment for screen Position, Size, and Phase1MENUSelect PICTURE.2ENTERSelect Screen (RGB-PC).3ENTERSelect Position, Size, or Phase.4ENTERMake appropriate adjustments.5ENTERᯫ Position: This function is to adjust picture to left/right and up/down as you prefer. ᯫ Size: This function is to minimize any vertical bars or stripes visible on the screen background. And the horizon-tal screen size will also change.ᯫ Phase: This function allows you to remove any horizontal noise and clear or sharpen the image of char-acters.3,&785( ᯒ0RYHᯙ(QWHU  ؒ%ULJKWQHVV  ؒ6KDUSQHVV  ؒ&RORU   ؒ7LQW   ؒ&RORU7HPS   ؒ$GYDQFHG&RQWURO  ؒ3LFWXUH5HVHWؒ 6FUHHQ5*%3&5*:&ᯙᯰ$XWR&RQILJ5HVROXWLRQ3RVLWLRQ6L]H3KDVH5HVHWۻ܁۽ۿ6&5((1ᯒ0RYHᰙ3UHY
51EXTERNAL EQUIPMENT SETUPReturns Position, Size, and Phase to the default initial settings.This feature operates only in RGB-PC mode.Screen Reset (Reset to original initial values)1MENUSelect PICTURE.2ENTERSelect Screen (RGB-PC).3ENTERSelect Reset.4ENTERSelect Yes .5ENTERStart Reset.3,&785( ᯒ0RYHᯙ(QWHU  ؒ%ULJKWQHVV  ؒ6KDUSQHVV  ؒ&RORU   ؒ7LQW   ؒ&RORU7HPS   ؒ$GYDQFHG&RQWURO  ؒ3LFWXUH5HVHWؒ 6FUHHQ5*%3&5*:&ᯙᯰ$XWR&RQILJ3RVLWLRQ5HVROXWLRQ6L]H3KDVH5HVHW7R6HW<HV 1R6&5((1ᯒ0RYHᰙ3UHY
WATCHING TV / CHANNEL CONTROLWATCHING TV / CHANNEL CONTROL52ENERGYCHVOL1234567809PAGESAVINGTVAV MODEINPUTFAVRATIOMUTEENTERMARKLISTFLASHBKMENU INFOQ.MENUBACK EXITREMOTE CONTROL FUNCTIONSWhen using the remote control, aim it at the remote control sensor on the TV.The remote control may differ from the images below.WATCHING TV / CHANNEL CONTROLPOWER Turns the TV on from standby or off to standby.ENERGY SAVINGAdjusts the Energy Saving setting. Źp.104AV MODE Toggles through preset Video and Audio modes. Źp.75INPUT Rotates through inputs. Also switches the TV on from standby. Źp.70TV Returns to the last TV channel. NUMBER button— (DASH) Used to enter a program number for multiple program channels such as 2-1, 2-2, etc. LIST Displays the channel table. Źp.67FLASHBK Tunes to the last channel viewed.MENU Displays the main menu or clears all on-screen displays and return to TV viewing.INFO Displays channel information at the bottom of the screen.Q.MENU Opens the list of Quick Menu options. Źp.59THUMBSTICK(Up/Down/LeftRight/ENTER)Navigates the on-screen menus and adjusts the system settings to your preference.BACK Allows the user to move return one step in an interactive application or other user interaction function.SIMPLINK See a list of AV devices connected to TV.When you toggle this button, the SIMPLINK menu appears at the screen. Źp.76EXIT Clears all on-screen displays and return to TV viewing.
53WATCHING TV / CHANNEL CONTROLᯫ Open the battery compartment cover on the back side and install the batteries matching correct polar-ity.ᯫ Install two 1.5V AAA batteries. Don’t mix old or used batteries with new ones.ᯫ Close cover.Installing BatteriesVOLUME UP/DOWN Adjusts the volume.FAV Scroll through the programmed Favorite channels. Źp.66MARK Select the input to apply the Picture Wizard settings. Źp.103Use to mark or unmark a photo/music/movie. Źp.83, 88, 94RATIO Changes the aspect ratio. Źp.100MUTE Switches the sound on or off. Źp.54CHANNELUP/DOWNChanges the channel.PAGEUP/DOWNMoves from one full set of screen information to the next one.COLOR BUTTONAccess special functions in some menus.USB, SIMPLINK Control buttons• Controls MY MEDIA menu (Movie List, Photo List, Music List)• Controls the SIMPLINK compatible devices.
WATCHING TV / CHANNEL CONTROLWATCHING TV / CHANNEL CONTROL54TURNING ON THE TVCHANNEL SELECTIONVOLUME ADJUSTMENTAdjust the volume to suit your personal preference.1First, connect power cord correctly. At this moment, the TV switches to standby mode.ᯫ In standby mode to turn TV on, press the / I, INPUT, CH (ᰜor ᰝ) button on the TV or press the , INPUT, CH (ᰜor ᰝ), Number (0-9) button on the remote control.2 Select the viewing source by using the INPUT button on the remote control.3When finished using the TV, press the POWER button on the remote control. The TV reverts to standby mode.!NOTEŹ If you intend to be away on vacation, disconnect the power plug from the wall power outlet.Ź If you do not complete the Initial setting, it will appear whenever the TV is switched on until the Initial setting procedure is completed.1Press the CH (ᰜor ᰝ) or NUMBER buttons to select a channel number.1 Press the VOL (+ or -) button to adjust the volume.2If you want to switch the sound off, press the MUTE button. 3You can cancel the Mute function by pressing the MUTE or VOL (+ or -) button.
55WATCHING TV / CHANNEL CONTROLINITIAL SETTINGThis Function guides the user to easily set the essential items for viewing the TV for the first time when purchasing the TV. It will be displayed on the screen when turning the TV on for the first time. It can also be activated from the user menus.Step 1. Selecting LanguageStep 2. Mode settingᯫ Default selection is “Home Use”. We recommend setting the TV to “Home Use” mode for the best picture in your home environment.ᯫ “Store Demo” Mode is only intended for use in retail environments. Customers can adjust the “Picture menu - Picture mode” manually while inspecting the TV, but the TV will automatically return to preset in-store mode after 5 minutes.ᯫ “Store Demo” Mode is an optimal setting for displaying at stores. “Store Demo” mode initializes the TV to set the image quality.1Select Menu Language.2ENTER1Select Home Use.2ENTER6WHS0RGH6HWWLQJ6HOHFWLQJWKHHQYLURQPHQW&KRRVHWKHVHWWLQJPRGH\RXZDQW6HOHFW>+RPH8VH@ZKHQVHWWLQJ79XSLQKRPH<RXFDQDGMXVWSLFWXUHTXDOLW\DFFRUGLQJO\WKURXJK3LFWXUH0RGHPHQXRSWLRQᰙ3UHYLRXV ᯙ1H[W:(/&20(7KDQN\RXIRUFKRRVLQJ/*ᯙ1H[W6WHS/DQJXDJH(QJOLVK(VSDµRO)UDQ«DLV䭢⍴㮻L+RPH8VH 6WRUH'HPRؒ 'HPR0RGH 2IIFor 19/22/26/32/37/42/47/55LE5300, 22/26LE5500, 42/47/55LE7300, 37/42/47LD450C, 55LD520C, 32/42/47/55LD520, 42/47/55LD630, 42/47/55LE530C, 32/37/42/47LD452C
WATCHING TV / CHANNEL CONTROLWATCHING TV / CHANNEL CONTROL56Step 4. Time ZoneStep 5. Auto Tuning1Select Time Zone option.2Select Daylight Saving option.3ENTER1ENTERCheck your antenna connection and start Auto Tuning.6WHS7LPH=RQHᰙ3UHYLRXV ᯙ1H[W7LPH=RQH ܁(DVWHUQ۽'D\OLJKW6DYLQJ $XWR6WHS$XWR7XQLQJᰙ3UHYLRXV ᯙ1H[W%HIRUHVWDUWLQJEHVXUHWKDWWKH79DQWHQQDLVFRQQHFWHGStep 3. Power Indicator (For LED LCD TV)1Select On or Off.2ENTER6WHS3RZHU,QGLFDWRUᰙ3UHYLRXV ᯙ1H[W6WDQGE\/LJKW ܁2II۽ᯫ This function is disable in “Step2. Mode Setting - Store Demo”.
57WATCHING TV / CHANNEL CONTROLON-SCREEN MENUS SELECTIONYour TV's OSD (On Screen Display) may differ slightly from that shown in this manual.1MENUDisplay each menu.2ENTERSelect a menu item.3ENTERAccept the current selection.4EXITReturn to TV viewing.&+$11(/237,213,&785($8',2 7,0(/2&.3,&785( ᯒ0RYHᯙ(QWHUؒ $VSHFW5DWLR ؒ 3LFWXUH:L]DUGؒ ᰚ(QHUJ\6DYLQJ 2IIؒ 3LFWXUH0RGH 6WDQGDUG  ؒ%DFNOLJKW   ؒ&RQWUDVW   ؒ%ULJKWQHVV   ؒ6KDUSQHVV7,0( ᯒ0RYHᯙ(QWHUؒ &ORFNؒ 2II7LPH 2IIؒ 2Q7,PH 2IIؒ 6OHHS7LPHU 2II/2&. ᯒ0RYHᯙ(QWHUؒ 6HW3DVVZRUGؒ /RFN6\VWHP 2Q  ؒ%ORFN&KDQQHO  ؒ0RYLH5DWLQJ  ؒ795DWLQJ&KLOGUHQ  ؒ795DWLQJ*HQHUDO  ؒ'RZQORDGDEOH5DWLQJ ؒ ,QSXW%ORFN237,21 ᯒ0RYHᯙ(QWHUؒ /DQJXDJHؒ &DSWLRQ 2IIؒ 3RZHU,QGLFDWRUؒ ,QLWLDO6HWWLQJؒ 6HW,' ؒ 0RGH6HWWLQJ +RPH8VH$8',2 ᯒ0RYHᯙ(QWHUؒ $XWR9ROXPH 2IIؒ &OHDU9RLFH,, 2IIᰕؒ %DODQFH  ؒ 6RXQG0RGH 6WDQGDUG ؒ,QILQLWH6RXQG2II  ؒ7UHEOH   ؒ%DVV   ؒ5HVHW/5&+$11(/ ᯒ0RYHᯙ(QWHUؒ $XWR7XQLQJؒ 0DQXDO7XQLQJؒ &KDQQHO(GLWؒ 6HW3DVVZRUGؒ /RFN6\VWHP 2Q  ؒ%ORFN&KDQQHO  ؒ795DWLQJ(QJOLVK  ؒ795DWLQJ)UHQFK  ؒ'RZQORDGDEOH5DWLQJ  ؒ,QSXW%ORFNؒ .H\/RFN 2IIFor USAFor Canada
WATCHING TV / CHANNEL CONTROLWATCHING TV / CHANNEL CONTROL58,13870<0(',$,QSXW/LVW ᯒ0RYH ᯙ(QWHU79 86% $9 &RPSRQHQW 5*%3& +'0,+'0, +'0,0RYLH/LVW0<0(',$ᯕ,QSXW/DEHO ᰙ([LW3KRWR/LVW 0XVLF/LVWi.e)Except 32/42/47LD420, 32/37/42/47LD450, 37/42/47LD450C, 32/42/47/55LD520, 55LD520C, 42/47/55LE530C, 42/47LD451C, 32/37/42/47LD452C([WUD&RQWHQWVFor 32/37/42/47LD452C
59WATCHING TV / CHANNEL CONTROL$ᯙ܁$VSHFW5DWLR۽ ᯳Aspect Ratio: Selects your desired picture format. ᰗPicture Mode: Selects the desired preset picture setting.ᰘ Sound Mode: Selects the desired preset sound setting.ᰄMulti Audio: Changes the audio language (Digital signal).ᰄSAP: Selects MTS sound (Analog signal).᯴Sleep Timer: Select the amount of time before your TV turns off automatically.ᰃ Del/Add: Select channel you want to add or delete.ᰔCaption: Select on or off.᯲USB Device: Select “Eject” in order to eject a USB device.QUICK MENU Your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual.Q.Menu (Quick Menu) is a menu of features which users might use frequently.1Q.MENUDisplay each menu.2ENTERMake appropriate adjustments.3EXITReturn to TV viewing.ᰙ([LW
WATCHING TV / CHANNEL CONTROLWATCHING TV / CHANNEL CONTROL60CUSTOMER SUPPORTPicture Test / Sound TestThis function is a customer support function that can execute picture and sound tests.۳3LFWXUH7HVWᯡ6RXQG7HVW۳3URGXFW6HUYLFH,QIR&ORVH1R<HV'R\RXKDYHDVRXQGSUREOHPLQWKLVVFUHHQ""1MENUSelect Customer Support.2ENTERSelect Picture Test or Sound Test.3ENTERSelect Yes .4BACKReturn to the previous menu.EXITReturn to TV viewing.ᯡ3LFWXUH7HVW۳6RXQG7HVW۳3URGXFW6HUYLFH,QIR&ORVH1R<HV'R\RXKDYHDSUREOHPLQWKLVWHVWVFUHHQ""5('
61WATCHING TV / CHANNEL CONTROLProduct/Service Info.۳3LFWXUH7HVW۳6RXQG7HVWᯡ3URGXFW6HUYLFH,QIR&ORVHThis function shows support and product information.Customer Service Center can differ by country.1MENUSelect Customer Support.2ENTERSelect Product/Service Info..You can check the various product/Service infomation based on your model.3BACKReturn to the previous menu.EXITReturn to TV viewing.5('
WATCHING TV / CHANNEL CONTROLWATCHING TV / CHANNEL CONTROL62SIMPLE MANUALYou can easily and effectively access the TV information by viewing a simple manual on the TV.During the Simple Manual operation, audio will be muted.1MENUSelect Simple Manual.2Select the part of the manual you would like to see.Go to the Index page.Play the Simple Manual automatically or manually.3EXITReturn to TV viewing.5('%/8(*5((1
63WATCHING TV / CHANNEL CONTROLCHANNEL SETUPAuto Scan (Auto Tuning)Automatically finds all channels available through antenna or cable inputs, and stores them in memory on the channel list. Run this function if you change your residence or move the TV. Auto Tuning memorizes only the channels available at the time.1MENUSelect CHANNEL.2ENTERSelect Auto Tuning.3ENTERSelect Start.4ENTERRun Auto tuning.5BACKReturn to the previous menu.EXITReturn to TV viewing.ᯫ The TV will ask for a password if parental control has been activated (LOCK Menu). Use the password you set up in the LOCK Menu to allow a channel search.ᯫ The maximum number of channels the TV can store is 1000. ᯫ Found channels are grouped in the order of DTV, TV, Cable DTV and Cable TV.&+$11(/ &+$11(/ᯒ0RYHᯙ(QWHU ᯒ0RYHᯙ(QWHUᯱᯙؒ $XWR7XQLQJؒ 0DQXDO7XQLQJؒ &KDQQHO(GLWؒ $XWR7XQLQJؒ 0DQXDO7XQLQJؒ &KDQQHO(GLW&KHFN\RXUDQWHQQDFRQQHFWLRQ7KHSUHYLRXVFKDQQHOLQIRUPDWLRQZLOOEHXSGDWHGGXULQJ$XWR7XQLQJ$QWHQQD&DEOH6WDUW&ORVH
WATCHING TV / CHANNEL CONTROLWATCHING TV / CHANNEL CONTROL64Add/Delete Channel (Manual Tuning)When selecting DTV or Cable DTV input signal in Manual Tuning, you can view the on-screen signal strength monitor to see the quality of the signal being received.1MENUSelect CHANNEL.2ENTERSelect Manual Tuning.3ENTERSelect DTV, TV, Cable DTV, or Cable TV.4Select channel you want to add or delete.5ENTERSelect Add or Delete.6BACKReturn to the previous menu.EXITReturn to TV viewing.ᯫ The TV will ask for a password if parental control has been activated (LOCK Menu). Use the password you set up in the LOCK Menu to allow a channel search.ᯫ The maximum number of channels the TV can store is 1000. &+$11(/ ᯒ0RYHᯙ(QWHUؒ $XWR7XQLQJؒ 0DQXDO7XQLQJؒ &KDQQHO(GLW&+$11(/ ᯒ0RYHᯙ(QWHUᯐᯙؒ $XWR7XQLQJؒ 0DQXDO7XQLQJؒ &KDQQHO(GLW&KDQQHO6HOHFWFKDQQHOW\SHDQG5)FKDQQHOQXPEHU܁'79۽&ORVH'HOHWH'79ؒ6LJQDO6WUHQJWKؒ6LJQDO4XDOLW\
65WATCHING TV / CHANNEL CONTROLChannel EditingThe channels in the Channel Edit List are displayed in black and the channels deleted from the Channel Edit List are displayed in blue.When a channel number is deleted, it means that you will be unable to select it using CHنهbutton during TV viewing. If you wish to select the deleted channel, directly enter the channel number with the NUMBER buttons or select it in the Channel Edit menu.ᯫ Keep pressing the ᰜbutton and use the or ! buttons to move between DTV, TV, Cable DTV and Cable TV.1MENUSelect CHANNEL.2ENTERSelect Channel Edit.3ENTERSelect a channel.4Add or delete a channel.Block or unblock the channel.You can block/unblock channels even if you select “Lock system-Off” in the LOCK menu.ENTERSwitch to the chosen channel number.CHPAGEMove the pages when the channel list is too long.5BACKReturn to the previous menu.EXITReturn to TV viewing.%/8(<(//2:5-13-1 7-1ᯙ&+&KDQJH'79 79 &DEOH'79 &DEOH79ᯒ1DYLJDWLRQ ᱇3DJH&KDQJH ᯕ%ORFN8QEORFN ᯕ$GG'HOHWH᱆)DYRULWH&K&KDQQHO(GLW 3DJHᱭ)DYRULWH&K*URXS ᰙ3UHYLRXV)DYRULWH*URXS $&+$11(/ ᯒ0RYHᯙ(QWHUᯙᯰؒ $XWR7XQLQJؒ 0DQXDO7XQLQJؒ &KDQQHO(GLW
WATCHING TV / CHANNEL CONTROLWATCHING TV / CHANNEL CONTROL66WATCHING TV / CHANNEL CONTROLFAVORITE CHANNEL SETUPFavorite Channels are a convenient feature that lets you quickly select channels of your choice without waiting for the TV to select all the in-between channels.1FAVMARKDisplay the Favorite channel list.1Select a channel.2ENTERSwitch to the chosen channel number.1CHPAGETurn the pages.2EXITReturn to TV viewing.Selecting a channel in the favorite channel listPaging through a favorite channel listDisplaying the favorite channel listᯫ You can also setup Favorite List in the CHANNEL menu - Channel Edit.12345067891orCHPAGESelect your desired channel.2FAVMARKSelect your desired favorite channel group from A to D.3Register or cancel the current channel in favorite channel list.Go to the “CHANNEL menu - Channel Edit”.4EXITReturn to TV viewing.<(//2:%/8(FAVORITE CHANNEL LISTᯚᯛ)DYRULWH&K*URXSᯚᯛ)DYRULWH&K*URXS)DYRULWH/LVW)DYRULWH/LVWᰙ([LWᰙ([LW܁*URXS$۽܁*URXS$۽DTVDTVDTVDTVᯕ&K5HJᯕ&K5HJᯕ&K(GLWᯕ&K(GLWᯱᯙᯱᯙ
WATCHING TV / CHANNEL CONTROL67CHANNEL LISTYou can check which channels are stored in the memory by displaying the channel list.&KDQQHO/LVW ᰙ([LWDTVᯢDTVᯕ&K(GLW1Select a channel.2ENTERSwitch to the chosen channel number.1LISTDisplay the Channel List.Tune to the “CHANNEL menu - Channel Edit”.1CHPAGETurn the pages.2EXITReturn to TV viewing.Selecting a channel in the channel listPaging through a channel listDisplaying Channel List%/8(This padlock is displayed when the channel is locked with parental control.ᯱᯙ
WATCHING TV / CHANNEL CONTROLWATCHING TV / CHANNEL CONTROL68Displaying Channel InformationCHANNEL INFORMATION1INFOShow the current channel program Information on the screen.2Show a previous or next channel’s program infor-mation3EXITReturn to TV viewing.᯵0XOWLOLQJXDO᯸᯿&DSWLRQᰇLᯢ793*'/69%ULHI,QIR7LWOH7HVW᯦'79&11 ᯐ&K&KDQJH۽1H[Wᯙ:DWFK$0 $01RLQIRUPDWLRQ6DUDK%UDGOH\6WHYH*UD\DQG%UHQGRQ3RQJLDSUHVHQWWKHODWHVWLQIDVKLRQWKHDUWVHQWHUWDLQPHQWOLIHVW\OHDQGFRRNLQJZLWKUHJXODUDQGVSHFLDOJXHVWV6DUDK%UDGOH\6WHYH*UD\DQG%UHQGRQ3RQJLDSUHVHQWWKHODWHVWLQIDVKLRQWKHDUWVHQWHUWDLQPHQWOLIHVW\OHDQGFRRNLQJᯱᯕ8Sᯕ'RZQ
69WATCHING TV / CHANNEL CONTROLCHANNEL BRIEF INFORMATIONBrief Info shows the present screen information.1ENTERShows the current channel’s brief info screen.2ENTERReturn to TV viewing.1 Program title2 Day, Month, Year, Present time3 Program start time4 Program progress bar5 Program finish time6 Banner information6XQ)HE$0᯵0XOWLOLQJXDO᯸᯿&DSWLRQᰇLᯢ793*'/69$0 $0%ULHI,QIR7LWOH7HVW1H[W$01HZV&11᯦'79ᱏ᯻6 3 11 4 5 2᯵Multilingual : The program contains two or more audio servic-es. Use the Q.MENU menu to select wanted Audio. ᯿Caption : The program contains one or more caption services. Use the Q.MENU menu to select wanted Closed caption. ᯸Dolby Digital: The program contains a Dolby Digital audio signal in TV and HDMI input source.ᰆThe original aspect ratio of the video is 4:3ᰇThe original aspect ratio of the video is 16:9 (wide)480i480p720p1080i1080pThe video resolution is 720x480iThe video resolution is 720x480pThe video resolution is 1280x720pThe video resolution is 1920x1080iThe video resolution is 1920x1080pᯢV-Chip: The program contains V-Chip information. Refer to the LOCK menu: A (Age), D (Dialogue), L (Language), S (Sex), V (Violence), FV (Fantasy Violence)
WATCHING TV / CHANNEL CONTROLWATCHING TV / CHANNEL CONTROL70ᯫ When new external device is connected, this popup menu is displayed automatically. If selecting Ye s, you can select input source that you want to appreciate.ᯫ But, when selecting “SIMPLINK - On”, popup menu for HDMI input will not be displayed.INPUT LISTOnly these input signals which are connected to a TV can be activated and selected.1INPUTENTERSelect the desired input source.ᯫ TV: Select it to watch over-the-air, cable and digital cable broadcasts.ᯫ AV: Select them to watch a VCR or other external equipment.ᯫ Component: Select them to watch DVD or a Digital set-top box.ᯫ RGB-PC: Select it to view PC input.ᯫ HDMI: Select them to watch high definition devices.,QSXW/LVW ᯒ0RYH ᯙ(QWHU79 86% $9 &RPSRQHQW 5*%3& +'0,+'0, +'0,ᯕ,QSXW/DEHO ᰙ([LWDisconnected inputs are inactive (grayed out)1R<HV1HZH[WHUQDOLQSXWLVFRQQHFWHG'R\RXZDQWWRXVHWKLV"$9i.e)
71WATCHING TV / CHANNEL CONTROLie) Change the input label using Blue buttonINPUT LABELThis indicates which device is connected to which input port. 1INPUTSelect the desired input source.2Select the label.3BACKReturn to the previous menu.EXITReturn to TV viewing.,QSXW/LVW ᯒ0RYH ᯙ(QWHU79 86% $9 &RPSRQHQW 5*%3& +'0,+'0, +'0,,QSXW/DEHO$9 ܁9&5 ۽&RPSRQHQW ܁۽5*%3& ܁۽+'0, ܁۽+'0, ܁۽ᯝ&ORVHᯕ,QSXW/DEHO ᰙ([LW%/8(i.e) i.e)
WATCHING TV / CHANNEL CONTROLWATCHING TV / CHANNEL CONTROL72RESET TO FACTORY DEFAULT (INITIAL SETTING)This function resets the TV to factory default and erases all stored channels.ᯫ When selecting “Lock System - On” in the LOCK menu, the message to enter the password appears.ᯫ If you forget your password, press “0-3-2-5” on the remote control.1MENUSelect OPTION.ENTERSelect Initial Setting.3ENTERSelect Yes .4ENTERTV turns off automatically and starts factory reset.237,21 ᯒ0RYHᯙ(QWHUᯐᯙؒ /DQJXDJHؒ &DSWLRQ 2IIؒ 3RZHU,QGLFDWRUؒ ,QLWLDO6HWWLQJؒ 6HW,' ؒ 0RGH6HWWLQJ +RPH8VH237,21 ᯒ0RYHᯙ(QWHUᯐᯙؒ /DQJXDJHؒ &DSWLRQ 2IIؒ 3RZHU,QGLFDWRUؒ ,QLWLDO6HWWLQJؒ 6HW,' ؒ 0RGH6HWWLQJ +RPH8VH1R<HV$OOXVHUVHWWLQJVDQGFKDQQHOVHWWLQJVZLOOEHUHVHW6WLOOFRQWLQXH"

Navigation menu