LG Electronics USA 42LDBT LCD TV/Monitor User Manual MFL34797004 Edit1
LG Electronics USA LCD TV/Monitor MFL34797004 Edit1
Contents
- 1. Users Manual 1
- 2. Users Manual 2
- 3. Users Manual 3
Users Manual 2
EXTERNAL EQUIPMENT SETUP VCR SETUP VIDEO AUDIO To avoid picture noise (interference), leave an adequate distance between the VCR and TV ■ Use the ISM feature in the Option menu to avoid having a fixed image remain on the screen for a long period of time. If the 4:3 picture format is used; the fixed images on the sides of the screen may remain visible on the screen. This phenomenon is common to all manufactures and in consequence the manufactures warranty does not cover the product bearing this phenomenon. ■ When connecting with an antenna EXTERNAL EQUIPMENT SETUP RGB IN (PC) HDMI/DVI IN REMOTE AUDIO IN (RGB/DVI) CONTROL IN ANTENNA/ CABLE IN OPTICAL S-VIDEO VIDEO ANT OUT RS-232C IN (CONTROL & SERVICE) DIGITAL AUDIO OUT S-VIDEO ANT IN OUTPUT SWITCH Wall Jack Antenna 1. How to connect Connect the RF antenna out socket of the VCR to the A n t e n n a socket on the set. Connect the antenna cable to the RF antenna in socket of the VCR. 2. How to use ■ Set VCR output switch to 3 or 4 and then tune TV to the same channel number. ■ Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.) AUDIO 20 VIDEO ( VIDEO When connecting with a RCA cable 1. How to connect ANT IN S-VIDEO ANT OUT OUTPUT SWITCH VIDEO AUDIO Select A V 1 input source with using the I N P U T button on the remote control. ■ If connected to A V I N 2, select A V 2 input source. ■ OPTICAL (MONO) DIGITAL AUDIO OUT S-VIDEO VIDEO AUDIO AV IN 1 Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.) ! NOTE If you have a mono VCR, connect the audio cable from the VCR to the A U D I O L / M O N O jack of the set. When connecting with an S-Video cable 1. How to connect Connect the S-VIDEO output of the VCR to the S - V I D E O input on the set. Connect the audio outputs of the VCR to the A U D I O input jacks on the set. S-VIDEO ANT OUT OUTPUT SWITCH VIDEO VIDEO AUDIO 2. How to use ■ Select A V 1 input source with using the I N P U T button on the remote control. OPTICAL DIGITAL AUDIO OUT If connected to A V I N 2, select A V 2 input source. The picture quality is improved: compared to normal composite (RCA cable) input. VIDEO AUDIO CAUTION ! NOTE (MONO) S-VIDEO AV IN 1 ■ Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.) AV OUT ■ COMPONENT IN ANT IN EXTERNAL EQUIPMENT SETUP ■ AV OUT 2. How to use COMPONENT IN V I D E O jacks between TV and Connect the A U D I O/V VCR. Match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red) VIDEO AUDIO Do not connect to both Video and S-Video at the same time. In the event that you connect both Video and the S-Video cables, only the S-Video will work. 21 EXTERNAL EQUIPMENT SETUP OTHER A/V SOURCE SETUP Camcorder 1. How to connect VIDEO 2. How to use ■ ■ Select A V 2 input source with using the I N P U T button on the remote control. If connected to A V I N 1 input, select A V 1 input source. Operate the corresponding external equipment. This TV finds the connected input sources automatically for AV1, AV2, Component 1-2, RGB, HDMI1/DVI and HDMI2 sources are connected. AV IN 2 S-VIDEO ■ VIDEO L/MONO AUDIO R EXTERNAL EQUIPMENT SETUP V I D E O jacks Connect the A U D I O/V between TV and external equipment. Match the jack colors. (Video = yellow, Audio Left = white, and Audio Right = red) ! NOTE 22 Video Game Set PC SETUP This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. ERVICE RGB IN (PC) When connecting D-sub 15pin cable 1. How to connect HDMI/DVI IN REMOTE AUDIO IN (RGB/DVI) CONTROL IN Connect the PC audio output to the A U D I O I N ( R G B / D V I) jack on the set. OPTICAL RS-232C IN (CONTROL & SERVICE) 2. How to use ■ ■ Turn on the PC and the set. Select R G B - P C input source in main input option of SETUP menu. ( G p.67) ! NOTE AUDIO DIGITAL AUDIO OUT EXTERNAL EQUIPMENT SETUP Connect the RGB output of the PC to the R G B I N ( P C) jack on the set. RGB OUTPUT Check the image on your TV. There may be noise associated with the resolution, vertical pattern, contrast or brightness in PC mode. If noise is present, change the PC output to another resolution, change the refresh rate to another rate or adjust the brightness and contrast on the VIDEO menu until the picture is clear. If the refresh rate of the PC graphic card can not be changed, change the PC graphic card or consult the manufacturer of the PC graphic card. 23 EXTERNAL EQUIPMENT SETUP When connecting HDMI to DVI cable 1. How to connect EXTERNAL EQUIPMENT SETUP Connect the DVI output of the PC to the H D M I / D V I I N 1 or 2 jack on the set. Connect the PC audio output to the A U D I O I N ( R G B / D V I ) jack on the set. SERVICE RGB IN (PC) HDMI/DVI IN REMOTE AUDIO IN (RGB/DVI) CONTROL ANTENNA/ CABLE IN RS-232C IN (CONTROL & SERVICE 2. How to use ■ ■ Turn on the PC and the set Select H D M I 1 / D V I or H D M I 2 input source with using the I N P U T button on the remote control. ! NOTE 24 If the PC has a DVI output and no HDMI output, a separated audio connection is necessary. If the PC does not support Auto DVI, you need to set the output resolution appropriately. To get the best picture quality, adjust the output resolution of PC graphics card's output resolution to 1024x768, 60Hz. DVI-PC OUTPUT AUDIO ! NOTES To get the the best picture quality, adjust the PC graphics card to 1024x768, 60Hz. Depending on the graphics card, DOS mode may not work if a HDMI to DVI Cable is in use. When Source Devices are connected with HDMI/DVI Input, the output PC Resolution (VGA, SVGA, XGA, WXGA), Position and Size may not fit on the Screen. Press the ADJUST button to adjust the screen Position of the TV SET and contact a PC graphics card service center. When Source Devices connected with HDMI/DVI Input, output TV SET Resolution (480p, 720p, 1080i, 1080p) and TV SET Display fit EIA/CEA861-B Specification to Screen. If not, refer to the Manual of HDMI/DVI Source Devices or contact your service center. If the HDMI/DVI Source Device is not connected to the Cable or if there is a poor cable connection, "No signal" is displayed in the HDMI/DVI Input. In this case, that Video Resolution is not supported. If "Invalid Format" is displayed, refer to the Source Device manual or contact your service center. Avoid keeping a fixed image on the screen for a long period of time. The fixed image may become permanently imprinted on the screen. The synchronization input form for Horizontal and Vertical frequencies is separate. Supported Display Specifications EXTERNAL EQUIPMENT SETUP HDMI1/DVI-DTV, HDMI2-DTV mode RGB-PC, HDMI1/DVI-PC mode Resolution Horizontal Frequency(KHz) Vertical Frequency(Hz) 640x350 31.469 70.08 720x400 31.469 70.08 640x480 31.469 59.94 800x600 37.879 60.31 1024x768 48.363 60.00 1280x768 47.776 59.87 1360x768 47.720 59.799 1366x768 47.130 59.65 Resolution Horizontal Frequency(KHz) Vertical Frequency(Hz) 720x480 31.469 31.500 59.94 60.00 1280x720 44.960 45.000 59.94 60.00 1920x1080i 33.720 33.750 59.94 60.00 1920x1080p 27.000 33.750 24.00 30.00 * RGB-PC mode only: 640x350, 720X400 25 EXTERNAL EQUIPMENT SETUP Screen Setup for PC mode PICTURE SOUND CC SAP ADJUST Overview EXTERNAL EQUIPMENT SETUP When RGB connect to PC output and select the RGB-PC in Input source, this function is used. When HDM/DVI connect to PC output and select HDMI/DVI input, this function is used. After connecting RGB-PC or HDMI/DVI to PC input and checking the screen quality. When you change the resolution, select the proper resolution in present input to see the best picture appearance. Adjustment for screen Resolution, Position, Size, and Phase 1024 x 768 1280 x 768 1360 x 768 1366 x 768 Press the A D J U S T button and then use D or E button to select R e s o l u t i o n, P o s i t i o n, S i z e, or P h a s e. Press the ENTER button and then use D E F G button to make appropriate adjustments. ■ The P h a s e adjustment range is - 1 6 ~ + 1 6. In HDMI/DVI-PC mode, Phase is not available. ■ The S i z e adjustment range is - 3 0 ~ + 3 0. In HDMI/DVI-PC mode, S i z e is not available. Press the ENTER button. Initializing (Reset to original factory values) Close Resolution This function allows you select resolution of XGA/WXGA. Position This function is to adjust picture to left/right and up/down as you prefer. Size This function is to minimize any vertical bars or stripes visible on the screen background. And the horizontal screen size will also change. Phase This function allows you to remove any horizontal noise and clear or sharpen the image of characters. To initialize the adjusted values Press the A D J U S T button and then use D or E button to select R e s e t. Press the ENTER button and then use F or G button to select Y e s. 26 Press the ENTER button. Close AV OUT SETUP The TV has a special signal output capability which allows you to hook up the second TV or monitor. NT IN 1. How to connect ICAL L AUDIO UT (MONO) S-VIDEO VIDEO AUDIO ! NOTE Component1-2, RGB-PC, HDMI1/DVI, HDMI2, DTV input sources cannot be used for AV out. We recommend to use the AV OUT jacks for VCR recording. VIDEO S-VIDEO DIGITAL AUDIO OUTPUT EXTERNAL EQUIPMENT SETUP See the Operating Manual of the second TV or monitor for further details regarding that device’s input settings. AV IN 1 Connect the second TV or monitor to the TV’s AV OUT jacks. AV OUT Send the TV’s audio to external audio equipment via the Digital Audio Output (Optical) port. 1. How to connect Connect one end of an optical cable to the TV Digital Audio (Optical) Output port. Connect the other end of the optical cable to the digital audio (optical) input on the audio equipment. Set the “TV Speaker option - Off” in the AUDIO menu. (G p . 8 4). See the external audio equipment instruction manual for operation. (PC) REMOTE AUDIO IN (RGB/DVI) CONTROL IN OPTICAL RS-232C IN (CONTROL & SERVICE) DIGITAL AUDIO OUT S-VIDEO VIDEO ! NOTE When connecting with external audio equipments, such as amplifiers or speakers, please turn the TV speakers off. (G p . 8 4) CAUTION Do not look into the optical output port. Looking at the laser beam may damage your vision. 27 WATCHING TV / CHANNEL CONTROL REMOTE CONTROL FUNCTIONS When using the remote control, aim it at the remote control sensor on the TV. MODE Select the remote operating mode: TV, DVD, VCR, AUDIO, CABLE or STB. INPUT TV INPUT POWER VCR/DVD Control video cassette recorders or DVD players. control buttons MENU Displays the main menu. BRIGHT -/ + AUDIO Adjust the brightness on screen. It turns to the default settings brightness by changing mode source. WATCHING TV / CHANNEL CONTROL HT - BRIG MENU VCR STB BRIG HT + THUMBSTICK Navigate the on-screen menus and adjust the system set(Up/Down/Left tings to your preference. Right/ENTER) ENTER EXIT Clear all on-screen displays and return to TV viewing from any menu. TIMER Select the amount of time before your TV turns off automatically. G p . 9 0 EXIT INK TIMER RATIO SIMPL RATIO Change the aspect ratio. G p.92-93 VOL MUTE FAV CH SIMPLINK C? G p.92-93 VOLUME UP Increase/decrease the sound level. /DOWN MUTE Switch the sound on or off. G p.38 FAV Scroll through the programmed Favorite channels. CHANNEL Select available channels. UP/DOWN NUMBER button — (DASH) Used to enter a program number for multiple program channels such as 2-1, 2-2, etc. BACK Tune to the last channel viewed. Illuminates the remote control LIGHT buttons of selected mode. 28 DVD MODE CABLE TV BACK POWER Turns your TV or any other programmed equipment on or off, depending on the mode. TV INPUT In AV 1-2, Component 1-2, RGB-PC (or RGB-DTV), HDMI1/DVI, and HDMI2 input sources, screen returns to the last TV channel. INPUT External input modes rotate in regular sequence: Antenna, Cable, AV1-2, Component 1-2, RGBPC (or RGB-DTV), HDMI1/DVI and HDMI2. (AV 1-2, Component 1-2, RGB-PC (or RGB-DTV), HDMI1/DVI, and HDMI2 input sources are linked automatically, only if these are connected.) PICTURE Adjust the factory preset picture depend on the viewing environment. G p . 6 9 SOUND Select the appropriate type of sound for type of program. G p . 8 0 SAP PICTURE SOUND BACK SAP Analog mode: Selects MTS sound (Mono, Stereo, and a SAP) DTV mode: Change the audio language. CC Select a closed caption. G p . 9 4 (*In DTV/CADTV mode G p . 9 5) CC ADJUST Installing Batteries ADJUST Adjust the screen position, size and phase in PC mode. G p . WATCHING TV / CHANNEL CONTROL Inside the Sliding Cover Remote control effective range INPUT TV INPUT INPUT TV INPUT POWER POWER ■ ■ ■ Open the battery compartment cover on the back side and install the batteries matching correct polarity (+with +,-with -). Install two 1.5V AA batteries. Don’t mix old or used batteries with new ones. Close cover. DVD MODE CABLE TV AUDIO VCR DVD MODE CABLE TV STB AUDIO BRIGH T- MENU BRIGHT BRIGH T- MENU VCR STB BRIGHT ■ Use a remote control up to 7 meters distance and 30 degree (left/right) within the receiving unit scope. ■ Dispose of used batteries in a recycle bin to preserve environment. 29 WATCHING TV / CHANNEL CONTROL TURNING ON TV INPUT TV INPUT POWER First, connect power cord correctly. At this moment, the TV switches to standby mode. ■ In standby mode to turn TV on, press the , INPUT, C H (D or E) button on the TV or press the POWER, INPUT, TV INPUT, C H (D or 9 ) button on the remote control. E), Number (0~9 Select the viewing source by using the TV INPUT, INPUT button on the remote control. ■ This TV is programmed to remember which power state it was last set to, even if the power cord is out. TV EXIT VOL DVD MODE VCR NK SIMPLI RATIO TIMER MUTE CH FAV BACK WATCHING TV / CHANNEL CONTROL PICTURE SOUND SAP CC When finished using the TV, press the POWER button on the remote control. The TV reverts to standby mode. ! NOTE If you intend to be away on vacation, disconnect the power plug from the wall power outlet. When the TV is turned on, the indicator will blink green before the picture is seen. CHANNEL SELECTION EXIT VOL Press the C H D NK SIMPLI RATIO TIMER MUTE CH FAV or NUMBER buttons to select a channel number. VOLUME ADJUSTMENT BACK PICTURE SOUND SAP CC Adjust the volume to suit your personal preference. EXIT Press the V O L D or E button to adjust the volume. VOL 30 NK SIMPLI RATIO TIMER MUTE CH FAV If you want to switch the sound off, press the M U T E button. You can cancel the Mute function by pressing the M U T E or V O L D or E button. ON-SCREEN MENUS SELECTION Your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual. Press the M E N U button and then use D or E button to select the each menu. Press the G button and then use D E F G button to display the available menus. EZ Scan EZ Picture Manual Scan Color Temperature Channel Edit XD DTV Signal Advanced Input Source Video Reset Input Label Set ID LOCK For USA For Canada AUDIO Lock System Lock System Audio Language Set Password Set Password EZ Sound Block Channel Block Channel Balance Movie Rating TV Rating-English TV Speaker TV Rating-Children TV Rating-French TV Rating-General Input Block WATCHING TV / CHANNEL CONTROL VIDEO SETUP Input Block TIME OPTION Aspect Ratio Auto Clock Caption/Text Manual Clock Caption Option Off Timer Language On Timer ISM Method Sleep Timer Low Power Auto Off 31 WATCHING TV / CHANNEL CONTROL AUTO SCAN (EZ SCAN) INPUT TV INPUT POWER Automatically finds all channels available through antenna or cable inputs, and stores them in memory on the channel list. Run EZ Scan again after any Antenna/Cable connection changes. A password is required to gain access to EZ Scan menu if the Lock System is turned on. DVD MODE CABLE TV AUDIO HT - VCR STB MENU BRIG BRIG HT + ENTER EXIT NK SIMPLI RATIO TIMER WATCHING TV / CHANNEL CONTROL EZ Scan Press the M E N U button and then use D or E button to select the S E T U P menu. Manual Scan Channel Edit DTV Signal Input Source Input Label Press the G button and then use D or E button to select E Z S c a n. Set ID Press the E N T E R button to begin the channel search. Allow E Z S c a n to complete the channel search cycle for A N T E N N A and C A B L E. EZ Scan Manual Scan Selection ( G or leads you to the EZ scan screen. Channel Edit DTV Signal Input Source Input Label Set ID EZ Scan Manual Scan Channel Edit Selection ( G or leads you to the EZ scan screen. Processing EZ scan... DTV Signal Input Source Input Label Set ID ANTENNA Ch.20 0 channel(s) found Press to stop the current scan and start DIGITAL ANTENNA channel scan. Next MENU Previous 32 ADD/DELETE CHANNEL (MANUAL SCAN) INPUT TV INPUT POWER A password is required to gain access to Manual Scan menu if the Lock System is turned on. DVD MODE CABLE TV AUDIO VCR STB MENU HT - BRIG BRIG HT + ENTER EXIT NK SIMPLI RATIO EZ Scan Press the M E N U button and then use D or E button to select the SETUP menu. Manual Scan Channel Edit DTV Signal Input Source Input Label Press the G button and then use D or E button to select Manual Scan. Set ID Press the G button and then use D or E button to select T V, D T V, C A T V, and C A D T V. EZ Scan Manual Scan Channel Edit Press the G button and then use D or E button to select channel you want to add or delete. Select channel type and RF-channel number. TV DTV Signal Input Source WATCHING TV / CHANNEL CONTROL TIMER Input Label Set ID Press the ENTER button to add or delete the channel. Press the E X I T button to return to TV viewing or press M E N U button to return to the previous menu. EZ Scan Manual Scan Channel Edit DTV Signal Input Source Select channel type and RF-channel number. TV TV 2-0 Input Label Set ID Press to delete the channel. 33 WATCHING TV / CHANNEL CONTROL CHANNEL EDITING INPUT TV INPUT POWER WATCHING TV / CHANNEL CONTROL There are two different ways in order to add or delete scanned channels. One is "Custom List" and the other is "Favorite List" in the channel list. Both of them are available after EZ Scan on the SETUP menu. A Custom List can be created by toggling each channel on or off with ENTER button. The channels in the Custom List are displayed in black color, and the channels deleted from the Custom List are displayed in gray color. Once a channel is highlighted you can add or delete the channel by referring to the small window at the top-left corner of the screen. You can create your own Favorite List. Use the F A V button on the remote control when a channel is highlighted and then add or delete the channel to/from your Favorite List. DVD MODE CABLE TV AUDIO HT - MENU BRIG VCR STB BRIG HT + ENTER EXIT TIMER NK SIMPLI RATIO EZ Scan Manual Scan Channel Edit Press the M E N U button and then use D or E button to select the SETUP menu. DTV Signal Input Source Input Label Set ID Press the G button and then use D or E button to select C h a n n e l E d i t. Press the G button. You will now see a screen filled with channel numbers and a preview picture. EZ Scan Manual Scan Channel Edit DTV Signal Selection ( G or ) leads you to the channel edit screen. Input Source Use D E F G button to select a channel and then use the ENTER button to add or delete it. Press FAV button to add the channel to the Favorite List. The heart-mark will appear in front of that channel number. Input Label Set ID Press E X I T button to return to TV viewing or press M E N U button to return to the previous menu. 34 DTV SIGNAL STRENGTH INPUT TV INPUT POWER This feature displays the DTV signal levels being received and indicates whether you need to adjust your antenna or digital cable input. The higher the signal strength, the less likely you are to experience picture degradation. DTV Signal: This function is only available when the input signal is DTV or CADTV. DVD MODE CABLE TV AUDIO HT - MENU BRIG VCR STB BRIG HT + ENTER EXIT NK SIMPLI RATIO EZ Scan Press the M E N U button and then use D or E button to select the S E T U P menu. Manual Scan Channel Edit DTV Signal Input Source Input Label Press the G button and then use D or E button to select D T V S i g n a l . View the on-screen signal strength monitor to see the quality of the signal being received. Set ID EZ Scan Manual Scan Channel Edit Press E X I T button to return to TV viewing or press M E N U button to return to the previous menu. Bad Normal Good DTV Signal WATCHING TV / CHANNEL CONTROL TIMER Input Source Input Label Set ID 35 WATCHING TV / CHANNEL CONTROL INPUT SOURCE SELECTION INPUT TV INPUT POWER Changes the picture source so you can watch your off-air TV, cable TV, VCR, DVD, or any other devices that are connected to your TV. DVD MODE CABLE TV AUDIO HT - MENU BRIG VCR STB BRIG HT + ENTER EXIT WATCHING TV / CHANNEL CONTROL Press the M E N U button and then use to select the S E T U P menu. or TIMER NK SIMPLI RATIO EZ Scan button Manual Scan Channel Edit DTV Signal Input Source Input Label Press the G button and then use select I n p u t S o u r c e . or button to Set ID Press the G button and then use D or E button to select the source: T V, A V 1, A V 2, C o m p o n e n t 1, C o m p o n e n t 2, R G B - P C, H D M I 1 / D V I, or H D M I 2. EZ Scan TV Manual Scan AV1 Channel Edit AV2 Component1 DTV Signal Input Source Press E X I T button to return to TV viewing or press M E N U button to return to the previous menu. Component2 Input Label RGB-PC Set ID HDMI1/DVI HDMI2 36 INPUT LABEL INPUT TV INPUT POWER Sets a label to each input source which is not in use when you press the INPUT button. DVD MODE CABLE TV AUDIO HT - VCR STB MENU BRIG BRIG HT + ENTER EXIT NK SIMPLI RATIO EZ Scan Press the M E N U button and then use D or E button to select the S E T U P menu. Manual Scan Channel Edit DTV Signal Input Source Input Label Press the G button and then use D or E button to select I n p u t L a b e l. Set ID Press the G button and then use D or E button to select the source: A V 1, A V 2, C o m p o n e n t 1, C o m p o n e n t 2, R G B - P C, H D M I 1 / D V I or H D M I 2. Press the F or G button to select the label. EZ Scan AV1 Cable Box Manual Scan AV2 VCR Channel Edit Component1 DVD DTV Signal Component2 Set Top Box Input Label Set ID Press E X I T button to return to TV viewing or press M E N U button to return to the previous menu. RGB-PC Input Source PC HDMI1/DVI HDMI2 WATCHING TV / CHANNEL CONTROL TIMER Game Satellite 37 WATCHING TV / CHANNEL CONTROL MENU HT - BRIG HT + BRIG This Enables you to control and play other AV devices connected to TV through HDMI cable without additional cables and settings. In order to control AV devices connected to TV without Simplink, user had to switch the input mode of TV and use additional remote control bundled to the AV devices. Simplink provides an easy solution to control all connected devices with one remote control. ENTER EXIT VOL TIMER RATIO MUTE SIMPLI NK CH FAV WATCHING TV / CHANNEL CONTROL Aspect Ratio Press the M E N U button and then use to select the O P T I O N menu. or button Caption/Text Caption Option Language ISM Method Low Power Press the G button and then use select S i m p L i n k. Press the G button and then use select O n or O f f. or or button to button to SimpLink Aspect Ratio Caption/Text Caption Option Press E X I T button to return to TV viewing or press M E N U button to return to the previous menu. Language ISM Method Low Power SimpLink Off On ! NOTE While Auto Tuning is proceeding, Simplink does not work. G Except Auto Tuning, Simplink stops the current activity or clears Display OSD on the screen. After Simplink workes, only Info. OSD resumes the display. G While Menu, XSTUDIO is proceeding, Simplink does not work. 38 Simplink Functions R e c o r d i n g / D i s c p l a y b a c k : Control connected AV devices by pressing the D E F G, E N T E R buttons and buttons for play, stop, pause, fast reverse, fast forward, chapter skip. ■ D i r e c t P l a y : After connecting AV devices to TV, you can directly control the devices and play media without additional settings. ■ S e l e c t A V d e v i c e : Enables you to select one of AV devices connected to TV and play it. ■ P o w e r o f f a l l d e v i c e s : When you power off TV, all connected devices are turned off. ■ S w i t c h a u d i o - o u t : Offers an easy way to switch audio-out. ■ (A device, which is connected to TV through HDMI cable but does not support Simplink, does not provide this function) DVD ■ HDD ■ DVD ■ DVD ■ P l a y e r H / T : DVD player embeddedH/T device. e m b e d d e d D V D R e c o r d e r ( R H ) : DVD recorder with HDD. R e c o r d e r C o m b o ( R - C o m b i ) : DVD Recorder integrating VCR. P l a y e r : Pre-recorded discs playback only. SimpLink Menu WATCHING TV / CHANNEL CONTROL AV devices supporting SimpLink Selected Device When no device is connected (displayed in gray) When a device is connected (displayed in bright color) T V v i e w i n g: Switch to the previous TV channel regardless of the current mode. D I S C p l a y b a c k: Select and play connected discs. When multiple discs are available, the titles of discs are conveniently displayed at the bottom of the screen. V C R p l a y b a c k: Play and control the connected VCR. H D D R e c o r d i n g s p l a y b a c k: Play and control recordings stored in HDD. A u d i o O u t t o H o m e t h e a t r e / A u d i o O u t t o T V: Select Home theatre or TV speaker for Audio Out. 39
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf Linearized : No Page Count : 20 PDF Version : 1.6 Has XFA : No XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:1ccaaede-dcde-40cc-95e8-da9f7faf16fa Modify Date : 2007:01:11 20:19:35+09:00 Create Date : 2007:01:11 20:19:06+09:00 Metadata Date : 2007:01:11 20:19:35+09:00 Document ID : uuid:4a308ad5-ff8b-4320-bad0-722c9cfceb75 Format : application/pdf Title : MFL34797004-Edit1 Creator : 3.3: LaserWriter 8 8.7.1 Author : sun Producer : Acrobat Distiller 4.0.5 for MacintoshEXIF Metadata provided by EXIF.tools