LG Electronics USA 42LEVSB LCD TV/Monitor User Manual 1

Download:
Mirror Download [FCC.gov]
Document ID	768842
Application ID	vlMHANMvEUbB4lnWPD+/rg==
Document Description	User Manual 1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	265.52kB (3318975 bits)
Date Submitted	2007-03-15 00:00:00
Date Available	2007-03-15 00:00:00
Creation Date	2007-03-14 14:04:30
Producing Software	Adobe Acrobat 7.0 Image Conversion Plug-in
Document Lastmod	2007-03-14 14:04:56
Document Title	User Manual 1
Document Creator	Adobe Acrobat 7.0

LCD TV
OWNER’S MANUAL
LCD TV MODELS
37LBSD / 42LB5D / 47LBSD
SZLBSD
32LB4D / 37LB4D / 42LB4D
Please read this manual carefully before operating your set
Retain it for future reference
Record model number and serial number of the set.
See the label attached on the back cover and quote this
information to your dealer when you require service.
ENERGY STAR is a set of power-saving
guidelines issued by me u.s.
Environmenlal Protection Agency(EPA).
A; an runner STAR
Partner LGE use,
lue. he; determined
am this prnducl
meal: the ENERGY
ENERGV STAR STAR guidelines for
energy efficiency.
com / www.|g.ca
(filmpum
[2727
HE} katrademark alum lam nu.
lmSnrmund x1 mhnnlngy is inmmnmad under
New lrom ms labs, lnr.
K, W wifl: Hus Inga disphys Full | m Do net hold the CABLE MANAGEMENT when mavlng the product.
— If the product is dmpped, yen may be injured ar the product may be broken.
I Here shown may be somewhat different from your TV.
37/42/47/52LBSD
0 Connect the cables as necessary.
To connect an additional equipment. see the
External equipment Connections section.
9 Install the CABLE MANAGEMENT as shown.
Bundle the cables using the supplied twist
holder.
How to remove the cable management
Hold the CABLE MANAGEMENT with both
hands and pull it upward.
0 NOTE
h- Benet hold: the CABLE MANAGEME‘N‘Nhen mingthepmduct
— Mike product is dropped. yew may‘be‘inimedpr timerp'rednczl: may be broken.
CAB" MANAtIMENT
NOLLVUVdElHd I
15
PREPARATION
DESKTOP PEDESTAL INSTALLATION
- For proper ventilation, allow a clearance of 4 in. on each side and the top, 2.36 in. on the bottom, and 4 in.
1 from the wall.
z:
rn
g 32/57/42LB‘D 37/42/47/52LBSD
4 India
Mndm find-u "mun 4mm
VESA WALL MOUNTING
This product accepts a VESA-compliant mounting interface pad. (optional)
There 4 threaded holes are available for attaching the bracket.
32/37/42LB4D 37/42/47/521850
comm
m min: my 7an)
mum."
Jofinlm Mm"!
13mm»: mw (mm-m
I am
“wreath magmas inflmilmmwrwmflr‘Wfimmc“MESA"
fillwaflfingljflrpcthnme
16
ANTENNA OR CABLE CONNECTION
1. Antenna (analog or digital)
Wall Antenna Socket or Outdoor Antenna without a Cable Box
Connections. For optimum picture quality. adjust antenna direc-
tion if needed.
Multi-farnily Dwellings/Apartments
Wall (Connect tn wall anienna sozkd)
Antenna » ANrENNA/
Socket
Outdoor
Antenna
(VHF. UHF) Single—family Dwellings [Homes 4
,‘(Cnnned to wall jack for outdoor antenna) {brim “er
Be careful not to bend the bronze wire
when connefling the anienna.
2. Cable
ANTENNA/
CABLEIN @
Cable TV I
Wall Jack
ar Coaxial Wire (75 ohm)
3. Using both cable and antenna
Antenna i l
>—‘ _ _ 5 Diplexer ANTENNN
RF Coaxial Wire (7 ohm) (Signal CABLE IN T
Combinnerl
Cable TV
Wall jack
RF Coaxial Wire (75 ohm)
ANTENNA!
UH F CABLE lN
Antenna Si |
5“ rm
”f Amplifier ‘
- To improve the picture quality in a poor signal area. please purchase a signal amplifier and install properly.
- If the antenna needs to be split for two TV's. install a Z-Way Signal Splitter.
- If the antenna is not installed properly, contact your dealer for assislance.
0 NOTE 9 The TV will let you know When the analog, cable, and digital channel scans are complete.
N0 IthlVd3Hcl
17
EXTERNAL EQUIPMENT SETUP
anus lN3WdIn03 "lVNtIEIlX3 I
18
HD RECEIVER SETUP
This TV can receive Digital 0ver-the~air/Cable signals without an external digital set-top box. However, if you
do neceive digital signals from a digital set-top box or otherdigital external device, refer to the figure as
shown below.
This TV supports HDCP (High-bandwidth Digital Contents Protection) protocol for Digital Contents.
When connecting Component cable
I. How to connect
0 Connect the video outputs (Y. PB, PR) at" the digital set
top box to the COMPONENT IN VIDEO 1 jacks on
the set Match the jack colors
(Y = green. PB = blue. and PR = red).
9 Connect the audio output of the digital set-top box to
the COMPONENT IN AUDIO Hacks on the set.
iii! é],
CIJMFi'lNENT m'
2. How to use
I Turn on the digital set-top box
(Refer to the owner's manual for the digital set'top box.)
- Select COMPONENT I input source with using the INPUT
button on the remote control.
- Itconnected to COMPONENT IN 2 input. select COMPO—
NENT 2 input source.
Componeri HDMl/DVII , 2 ol 3
Yes No
Yes Yes
Yes Yes
Yes Yes
Yes Yes
When connecting D-sub 15 pin cable
1. How to connect
0 Connect the KGB output of the digital set-top box to
the RGB (PC) jack on the set.
8 Connect the audio outputs of the set'top box to the
AUDIO (RGB/DVI) jack on the set.
2. How to use
- Turn on the PC and the set.
I Select KGB-PC Input source with using the INPUT button
on the remote control.
When connecting HDMI cable
1. How to connect
Connect the digital set-top box to HDMl/DVI Ni.
2 or 3 jack on the set.
a No sepamted audio connection is necessary.
2. How to use
- Turn on the digital set-top box.
(Refer to the owner's manual fol the digital set-top box.)
I SelectHDMIl , HDMIZ or HDMIZ input source With using
the INPUT button on the remote control.
l II the digital set-top box player does not support Auto HDMI.
you need to set the output iesulution appropriately.
AUDIO
(MB/DVD
HDMI/DVI IN REED-“CI
COMPi
v i>a
; WEEK)
minimum"
clfllEIS lN3WdlflO] ”lVNtllLX] I
19
EXTERNAL EQUIPMENT SETUP
anus lN3WdIfl03 WNHEILX3 I
20
When connecting HDMI to DVI cable
RGE IN
AUDIO
HDMI/DVI IN (KGB/DVI)
1. How to connect
0 Connect the DVI output of the digital set-top box to the HDMl/DVI Ni, 2 or 3 jack on the set.
a Connect the audio output of the dig'tal set‘top box to the AUDlO(RGB/DVI) jack on the set.
2. How to use
- Turn on the digital set-top box. (Refer to the owner's manual for the digital set-top box.)
- Select HDMI'I. HDMI2 or HDMI! input source with using the INPUT button on the remote control.
DVD SETUP
When connecting Component cable
I. How to connect
0 Connect the video outputs (Yt PB. PR) of the DVD to
the COMPONENT lN VlDEO'I jacks on the set.
Match the jack colors
(Y = glean, Pu = blue, and PR = red).
9 Connect the audio outputs of the DVD to the
COMPONENT IN AUDIOl jacks on the set
Milt!
2. How to use C'JMPr'lNENT m'
I Turn on the DVD player: insert a DVD
I Select COMPONENT 1 input source with using the
INPUT button on the remote control,
I ”connected to COMPONENT IN 2 input. select COM-
PONENT 2 input source.
I Refer to the DVD player's manual for operating instruc-
tions.
Component Input ports
To get better picture quality, connect a DVD player to the component input ports as shown below.
Component ports on the TV v V PI Pf
' y p. s ' a *
Video output ports v Pb Pr
on DVD player Y B)! m;
v d, g,
clfllElS 1N3Wd|n03 ”IVNtllLXE I
EXTERNAL EQUIPMENT SETUP
dl’lHS lNElINdIflO} WNHlLXEI I
22
When connecting with an S-Video cable
1. How to connect
0 Connect the S-VIDEO output of the DVD to the
S-VlDEO input on the set.
9 Connect the audio outputs of the DVD to the AUDlO
input jacks on the set,
2. How to use
- Turn on the DVD player. insert a DVD.
- Select AVl input source with using the lNFUT button on
the remote control.
- lfconnected tnAV IN 2, select AVZ input source.
- Refer to the DVD player's manual for opemting instructions.
When connecting HDMI cable
1. How to connect
0 Connect the HDMI output ol the DVD to the
HDMI/DVI IN1, 2 or 3 jack on the set.
a No separated audio connection is necessary.
2. How to use
- Select HDMl'I. HDMIZ or HDMB input source with using
the lNPUT button on the remote control.
- Reler to the DVD player's manual for operating instruc-
tions.
- If the DVD does not support Auto HDMI. you need to set
the output resolution appropriately.
HDMI/DVI IN
RGBlPCl m
COMPON
VCR SETUP
- To avoid picture noise (interference), leave an adequate distance between the VCR and TV
I If the 4:3 picture format is used; the fixed images on the sides of the screen may remain visible
on the screen.
When connecting with an antenna
anus 1N3Wdlfl03 "IVNHlLXE I
Wall lack
bum liflzlj um -l." f-
1. How to connect
0 Connect the RF antenna out socket of the VCR to the Antenna socket on the set.
a Connect the antenna cable to the RF antenna “1 socket of the VCR.
2‘ How to use
I Set VCR output switch to 3 or 4 and then tune TV to the same channel number.
I Inserta video tape into the VCR and press PLAY on the VCR (Reler to the VCR owner's manual.)
23
EXTERNAL EQUIPMENT SETUP
anus lNEleIflOEl ”IVNHEILX3 I
24
When connecting with a RCA cable
1. How to connect
“ Connect the AUDIO/VIDEOiacks between TV and
VCR. Match the jack colors(V-deo x yellow, Audio Lett =
whiteand Audio Right = red)
2. How to use
- Insert a video tape into the VCR and press PLAY on the
VCR. (Refer to the VCR owner's manual.)
- Select AVI input source with using the INPUT button on
the remote control.
- ”connected to AV IN 2.3electAV2 input source.
When connecting with an S~Video cable
1. How to connect
0 Connect the s-vmso output of the VCR to the s-
vmso input on the set. The picture quality is
improved: compared to normal composite (RCA cable)
input.
0 Connect the audio outputs of the VCR to the AUDIO
input jacks on the set.
2. How to use
- Insert a video tape into the VCR and press PLAY on the VCR.
(Refer to the VCR owner's manual.)
- Select AVl input source with using the INPUT button on the
remote control.
- If connected to AV IN 2. selectAVZ input source.
0 NOTE
) ”you have a mono VCR, con—
nect the audio cable from the
VCR to the AUDIO
L/MONOjack ofthe set.
we
S—VI muse unq—mo—n <
A CAUTION
D Do not connect in both Video
and S-Video at the same time.
OTHER A/V SOURCE SETUP
32 inches 37/42/47/52 inches
_‘/ ‘3
6T“ ‘
Camcorder
J Camcorder
Video Game Set
1. How to connect
a Connect the AUDIO/VIDEOjacks between TV and
external equipment. Match the jack colors.
(Video = yellow, Audio Left = white, and Audio Right = red)
2. How to use
I SelectAVZ input source with using the INPUT button on
the remote control,
' Ii connected to AV lN 1 input. selectAV1 input source,
- Operate the corresponding external equipment.
dfllES lN3WdIflO] "IVNtllLXE I
EXTERNAL EQUIPMENT SETUP
dflHS lNEIWdIflOEl TVNH31X3 I
26
PC SETUP
This TV provides Plug and Pla)l capability, meaning that the PC adjusts automatically to the TV's settings.
When connecting D~sub 15 pin cable
1. How to connect
0 Connect the RGB output of the PC to the RGB
(PC) jack on the set.
9 Connect the PC audio output to the AUDIO
(RCB/DVI) jack on the set.
2. How to use
- Turn on the PC and the set.
I Select KGB-PC input source with using the INPUT button
on the remote control,
0 NOTE
> Check the image on your TV. There may be noise associated
with the resolution. vertical pattern, contrast or brightness in
PC mode. If noise is present. change the PC output to another
resolution. change the refresh rate to another rate or adjust
the brightness and contrast on the VIDEO menu until the
picture is clear. If the refresh rate of the PC graphic card can
not be changed. change the PC graphic card or consult the
manufacturer of the PC graphic card.
AUDIO
HGNPC) (RGBIDVI)
When connecting HDMI to DVI cable
RGB IN
UD
”WW“ ‘N RGB(PC) (aéaé‘iu
F.0M.~;r»r:" w.
1. How to connect
Connect the DVI output of the PC to the HDMI/DVl IN'I . 2 ou 3 jack on the set.
(Use the HDMI to DVI cable)
6 Connect the PC audio output to the AUDIO(RCB/Dvl) jack on the set.
2. How to use
- Turn on the PC and the set
l Select HDMI] , HDMIZ or HDMI! input source with using the INPUT button on the remote control.
0 NOTE
b lf the PC has a DVI output and no HDMI output. a separated audio connection is necessary.
b If the PC does not support Auto DVI, you need to set the output resolution appropriately. To get the
best picture quality, adjust the output resolution olPC graphics cards output resolution to 1920x1030,
60 Hz.(32/37/42LB4 D models: 1360x768. GOHZ)
clfllEIS 1N3Wd|fl03 iVNtllLX] I
27
EXTERNAL EQUIPMENT SETUP
dfll3S lN3WdIfl03 TVNH31X3 I
28
0 NOTES
b Depending on the graphics card, DOS mode may
not work ifa HDMI in DVI Cable is in use.
> Check the image on your TV, There may be noise
associated with the resolution, vertical pattern,
conttast or brightness in PC mode. lfncise is
present change the PC output to another resolu‘
tion. change the refresh rate to another rate or
adjust the brightness and contrast on the PIC-
TURE menu until the picture is clear. Ifthe refresh
rate of the PC glaphic card can not be changed,
change the PC graphit card or consult the manu-
facturer of the PC graphic card.
b Avoid keeping a fixed image on the screen for a
long period of time. The fixed image may become
permanently imprinted on the screen.
> The synchronization input Form for Horizontal and
Vertical frequencies is separate.
Supported Display Specifications (RGB/HDMl-PC) Supported Display Specifications (HDMI-DTV)
R _ l . Horizontai Vernal R 1 t Horlzontai Vertlcsl
M W3" FrequencyiKHz) Frequency(Hz) 5“ ” '°" Fr66116ncy(KHz) Frequencyin)
54011350 31 468 70.09 31 .47 60.00
”OM“ 3147 59 94
7203400 31 469 7008
1280x720 45.00 60.00
31.469 59.94 44.96 59.94
640x480 32861 72.80
37500 75.00 33.75 60.00
33.72 59.94
35.156 56.25 6250 60.00
32879 60.31 67432 59939
500x600 46.077 72.16 1920x1080 2700 24.00
46.875 75.00 26.97 23.94
33.75 30.00
48.363 60.00 33.71 29.97
1024x768 56.476 70.06
60.023 73.02
12304758 47776 59.70 . . .
HBDX758 50’259 74-293 Suppnrted Dlsplay Speclficauons (Y, Cu/PB, CR/PR)
Ho lords? V mtai
1360x768 47.712 60.015 nzy(Hz)
63.961 60.020 6000
1250111024 79.976 75.025 720x480 59-94
59.94
1600x1200 75.00 60.00 6000
1920x1050 67.50 60.00 1280x720 45-00 5°~°°
44.96 59.94
33.75 60.00
37.72 59.94
' RGwc mode only: 128m768(H‘-60.2'89, 1174393) 6750 60 00
67.432 59.939
1920x1080 2700 2400
26.97 23.94
33,75 30,00
33,71 29,97
dflllS lNBWdIHOE "IVNHZLLXE I
EXTERNAL EQUIPM ENT SETUP
Screen Setup for PC mode
Overview
When the RGB input. of the set is connected to a PC Ou tpu t. Select
RGB-PC with using the INPUT button on the remote control.
When you change the resolution, select the proper resolution in
present input to see the best picture appearance.
mum Mode
Color Vnmvarntuu
0 Press the MENU human and then use A or V button xo
to select the PICTURE menu. Advanced
Aspm mlu
mum Rem
dflHS lN3W
u— size
,_: , Phase
0 Press the ENTER button and then use A aV or 1 />
button to make appropriate adjustments
5 The Phase adjustment range is -16 ~ +16.
v The Size adjustment range ls -30~ +3<1
13 “mm
000
Resolution X(J\(l0l4, IZRO. 1160) y pA?)
32
AUDIO OUT SETUP
Send the TVs audio to external audio equipment via the Audio Output port.
I. How to connect
Analog
a Connect audio outputs to the TV'sAUDIO OUT jacks.
9 Set the “TV Speaker option - Off" in the AUDIO menu,
(, p10). See the external audio equipment instruction
manual for operation.
Digital
Connect one end of the optical or coaxial cable to the
TV‘s OPTICAL or COAXIAL port of DIGITAL AUDIO
OUT.
Connect the other end of the optical or coaxial cable
to the digital audio input on the audio equipment
Set the “TV Speaker option - Oil" in the AUDIO menu,
(> p70) See the external audio equipment instruction
manual for operation.
ONOTE
> When connecting with external audio equipment, such as
amplifers or speakers, please turn the TV speakers off.
(> P”)
A CAUTION
P Do not look into the optical output port. Looking at the
laser beam may damage your vision.
P Block the SPDIF out(opticaI/coaxial) about the contenu
with ACPfAuclio Copy Protection) function.
DIGITAI AUDIO OUT
OPTICAL comm,
AV IN 1
dfllEIS lN3Wd|n03 ”IVNtIlLXE I
33
WATCHING TV /CHANNEL CONTROL
REMOTE CONTROL FUNCTIONS
When using the remote control, aim it at the remote control sensor on the TV.
MEDIAHosr
mode control I Controls the MEDIA-Hus? mode.
buttons
VCR/DVD I Control video cassette recorders or DVD players.
buttons
MENU Displays the main menu.
I Adjust brightness on screen.
BRIGHT +/. I It turns to the default settings brightness by changing
mode source,
THUMBSTICK ' _ '
(Up/Dwn/Left I Nawgate the on screen menus and adjust the system
Right/ENTER) settings to your preference.
EXIT Clear all on-screen displays and return to TV viewingfrom
any menu.
lOHlNOD "I3NNVHD / A1 ONIHDLVM I
TIMER Select the amount of time before your TV turns cffautn-
matically.» p.80
RATlO Change the aspect ratio.» p.54
SIMPLINK See a list ofAV devices connected to TV.
When you toggle this button, the SimpLink menu appears
at the screen.
VOLUME up Increase/decrease the sound level.
/DOWN
MUTE Switch the sound on or offi ’ p58
FAV Scroll through the programmed Favorite channels.
CHANNEL -
UP/DOWN Select available channels,
NUMBER button
BACK Tune tn the last channel viewed.
_ (DASH) Used to enter a program number for multiple
program channels such as 2-1 , 2-2, etc,
POWER Turns your TV or any other programmed equipment on or OFF, depending on the mode,
TV INPUT In AV 1-2. Component 1-2, ROB-PC. HDMIl . HDMIZ and HDMIS input sources, screen returns to
the last TV channel,
INPUT External input modes rotate in regular sequence: Antenna, Cable, AV] -2. Component 1 -2, RGBAPC.
HDMIl. HDMIZ, HDMI3 (Antenna, Cable. AV 12. Component 1-2, KGB-PC, HDMIl. HDMI2.
HDMI3 input sources are linked automatically. only if these are connected ).
l MODE Select the remote operating mode: TV. DVD. VCR. AUDIO. CABLE or STB,
' If the mode olanother product is selected, a button on the remote control which is not used
for the selected product can control the TV.
| MEDlAnosr Enter to the MEDIANosT mode.
Inside the Sliding Cover
PICTURE Adjust the factory preset picture depend
on the viewing environment.
SOUND Select the appropriate type of sound for
type of program
SAP Select MTS sound: Mono, Stereo, and SAP
analog mode. Change the audio language
DTV mode. > p. 69
CC Select the Caption On/OFE > p.73
MARK Enter the selected functions. P [1.49
7 USB ElECT Remove the USB device. > p31
Installing Batteries Remote control effective range
31’37’4ZLMD swan/mast)
“Open the battery compartment cover on the
backside and install the batteries matching cor-
rect polarity (+with +,-with -).
' Use a remote control up to 7 meters distance and 30
' Install two 1.5 V AA batteries. Don't mix old or degree (lelVright) within the receiving unit scope.
used batteries with new ones.
llDispose of used batteries in a recycle bin to pre-
'Close cover. serve environment.
"IOULNOD TleNVHD / It.|. DNlHJlVM I
35
WATCHING TV /CHANNEL CONTROL
TURNING ON TV
TOHlNOD 13NNVH) / A1 ON HDLVM I
36
0 First, connect power cord correctly.
At this moment, the TV switches to standby mode.
- In standby mode, press the (b/I (or ON/OFF). INPUT,
CH (A or 7) button on the TV or press the POWER,
INPUT. TV INPUT, CH(A or V). Number (0-9) but-
ton on the remote control.
a Select the viewing source by using the INPUT button on
the remote control.
I This TV is programmed to remember whieh mode it was
last set 113. even ifyou turn the TV off,
9 When finished using the TV. press the POWERbunon on
the remote control. The TV reverts to standby mode.
0 NOTE
b If you intend to be away on vacation, disconnect
the power plug from the wall power outlet.
b When the TV is turned on, the indicator will blink
red before the picture is seen.
CHANNEL SELECTION
0 Press the CH A or V or NUMBER buttons to select a
channel number.
"IOHlNOD ENNVHD / A]. DNIHDlVM I
37
WATCHING TV /CHANNEL CONTROL
10H1N0313NNVH) / Al DNIHDlVM I
38
VOLUME ADJUSTMENT
Adjust the volume to suit your personal preference.
Press the VOLA or V human to adjust the volume.
If you want to switch the sound ofl’. press the MUTE but-
(on.
You can cancel the Mute function by pressing the MUTEor
VOL A or V button,
D;
lei»
m 4
El
me
I3]
5)

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
Linearized                      : No
Page Count                      : 40
PDF Version                     : 1.6
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:beb09420-10dd-4490-b48a-78ed4f555ff6
Modify Date                     : 2007:03:14 14:04:56+09:00
Create Date                     : 2007:03:14 14:04:30+09:00
Metadata Date                   : 2007:03:14 14:04:56+09:00
Document ID                     : uuid:67717b97-a89d-4a16-8aea-c5a15dfdd926
Format                          : application/pdf
Creator                         : Adobe Acrobat 7.0
Producer                        : Adobe Acrobat 7.0 Image Conversion Plug-in

EXIF Metadata provided by EXIF.tools