LG Electronics USA 42LG500HUA LCD TV MONITOR User Manual User s Manual H ok

Download:
Mirror Download [FCC.gov]
Document ID	1057148
Application ID	0+iOA7Irdjxk/x/3uWRa2A==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	202.4kB (2529951 bits)
Date Submitted	2009-01-15 00:00:00
Date Available	2009-03-01 00:00:00
Creation Date	2009-01-14 17:04:36
Producing Software	Acrobat Distiller 7.0.5 (Windows)
Document Lastmod	2009-01-14 17:05:14
Document Title	Microsoft Word - User_s Manual_H_ok.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	EMC CENTER

Order Number
: GETEC-C1-09-010
Test Report Number
: GETEC-E3-09-011
APPENDIX H
: USER’S MANUAL
EUT Type: LCD TV/Monitor
FCC ID.: BEJ42LG500HUA
FCC Class B Certification
LCD TV PLASMA TV
OWNER’S MANUAL
LCD TV MODELS
32LC5DC
32LC50CS
32LC5DCS
32LC50CB
32LX50C
32LC5DCB
37LC5DC
32LX50CS
37LC50C
37LC5DCB
37LC5DC1
37LC50CB
42LC5DC
42LB50C
42LC50C
32LX5DC
32LX5DCS
32LG500H
37LG500H
42LB5DC
42LG500H
32LC50C
PLASMA TV MODEL
42PX8DC
42PG65C
42PG60C
Please read this manual carefully before operating
your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached on the back cover and quote
this information to your dealer when you require
service.
www.lgcommercial.com
WARNING / CAUTION
WARNING / CAUTION
To prevent fire or shock hazards, do not expose
this product to rain or moisture.
TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK). NO
USER SERVICEABLE PARTS INSIDE. REFER TO
QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead
symbol, within an equilateral triangle,
is intended to alert the user to the
presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to
the presence of important operating and maintenance (servicing) instructions in the literature
accompanying the appliance.
WARNING/CAUTION
TO REDUCE THE RISK OF FIRE AND ELECTRIC
SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.
NOTE TO CABLE/TV INSTALLER
This reminder is provided to call the CATV system
installer’s attention to Article 820-40 of the National
Electric Code (U.S.A.). The code provides guidelines for
proper grounding and, in particular, specifies that the
cable ground shall be connected to the grounding system of the building, as close to the point of the cable
entry as practical.
FCC NOTICE
Class B digital device
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However,
there is no guarantee that interference will not
occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to
try to correct the interference by one or more of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment
and receiver.
- Connect the equipment to an outlet on a circuit
different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV
technician for help.
Any changes or modifications not expressly
approved by the party responsible for compliance
could void the user’s authority to operate the
equipment.
CAUTION
Do not attempt to modify this product in any way
without written authorization from LG Electronics.
Unauthorized modification could void the user’s
authority to operate this product
SAFETY INSTRUCTION
IMPORTANT SAFETY INSTRUCTIONS
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
Only use attachments/accessories specified by
the manufacturer.
Use only with the cart, stand, tripod, bracket,
or table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use
caution when moving the cart/apparatus
combination to avoid injury from tip-over.
Unplug this apparatus during lighting storms or
when unused for long periods of time.
10
Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate
normally, or has been dropped.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
(including amplifiers)that produce heat.
Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has
two blades with one wider than the other. A
grounding type plug has two blades and a third
grounding prong, The wide blade or the third
prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
SAFETY INSTRUCTION
11
Never touch this apparatus or antenna during a
thunder or lighting storm.
12
When mounting a TV on the wall, make sure not to
install the TV by the hanging power and signal
cables on the back of the TV.
13
Do not allow an impact shock or any objects to fall
into the product, and do not drop onto the screen
with something.
14
CAUTION concerning the Power Cord :
It is recommend that appliances be placed upon a
dedicated circuit; that is, a single outlet circuit which
powers only that appliance and has no additional
outlets or branch circuits. Check the specification
page of this owner's manual to be certain.
Do not connect too many appliances to the same
AC power outlet as this could result in fire or electric shock.
Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords,
frayed power cords, or damaged or cracked wire
insulation are dangerous. Any of these conditions
could result in electric shock or fire. Periodically
examine the cord of your appliance, and if its
appearance indicates damage or deterioration,
unplug it, discontinue use of the appliance, and
have the cord replaced with an exact replacement
part by an authorized servicer. Protect the power
cord from physical or mechanical abuse, such as
being twisted, kinked, pinched, closed in a door, or
walked upon. Pay particular attention to plugs, wall
outlets, and the point where the cord exits the
appliance.
Do not make the TV with the power cord plugged
in. Do not use a damaged or loose power cord. Be
sure do grasp the plug when unplugging the power
cord. Do not pull on the power cord to unplug the
TV.
15
WARNING - To reduce the risk of fire or electrical
shock, do not expose this product to rain, moisture
or other liquids. Do not touch the TV with wet
hands. Do not install this product near flammable
objects such as gasoline or candles or expose the
TV to direct air conditioning.
16
Do not expose to dripping or splashing and do not
place objects filled with liquids, such as vases, cups,
etc. on or over the apparatus (e.g. on shelves above
the unit).
17
GROUNDING
Ensure that you connect the earth ground wire to
prevent possible electric shock. (i.e. a TV with a
three-prong grounded AC plug must be connected
to a three-prong grouned AC outlet) If grounding
methods are not possible, have a qualified electrician install a separate circuit breaker.
Do not try to ground the unit by connecting it to
telephone wires, lightening rods, or gas pipes.
Power
Supply
Short-circuit
Breaker
18
DISCONNECTING DEVICE FROM MAINS
Mains plug is the disconnecting device. The plug
must remain readily operable.
19
Keep the product away from direct sunlight.
20
ANTENNAS
Outdoor antenna grounding
If an outdoor antenna is installed, follow the precautions below. An outdoor antenna system should not
be located in the vicinity of overhead power lines or
other electric light or power circuits, or where it can
come in contact with such power lines or circuits as
death or serious injury can occur.
Be sure the antenna system is grounded so as to provide some protection against voltage surges and
built-up static charges.
Section 810 of the National Electrical Code (NEC) in
the U.S.A. provides information with respect to proper grounding of the mast and supporting structure,
grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of
antenna discharge unit, connection to grounding
electrodes and requirements for the grounding electrode.
Antenna grounding according to the
National Electrical Code, ANSI/NFPA 70
Ground Clamp
Cleaning
When cleaning, unplug the power cord and scrub
gently with a soft cloth to prevent scratching. Do not
spray water or other liquids directly on the TV as
electric shock may occur. Do not clean with chemicals such as alcohol, thinners or benzene.
22
Moving
Make sure the product is turned off, unplugged
and all cables have been removed. It may take 2 or
more people to carry larger TVs. Do not press
against or put stress on the front panel of the TV.
23
Ventilation
Install your TV where there is proper ventilation. Do
not install in a confined space such as a bookcase.
Do not cover the product with cloth or other materials (e.g.) plastic while plugged in. Do not install in
excessively dusty places.
24
If you smell smoke or other odors coming from the
TV or hear strange sounds, unplug the power cord
contact an authorized service center.
25
Do not press strongly upon the panel with a hand or
sharp object such as nail, pencil or pen, or make a
scratch on it.
Antenna Lead in Wire
Antenna Discharge Unit
(NEC Section 810-20)
Electric Service
Equipment
21
Grounding Conductors
(NEC Section 810-21)
Ground Clamps
Power Service Grounding
Electrode System (NEC
Art 250, Part H)
NEC: National Electrical Code
FEATURES OF THIS TV
On Disposal
a. The fluorescent lamp used in this product contains a small amount of mercury.
b. Do not dispose of this product with general
household waste.
c. Disposal of this product must be carried out in
accordance to the regulations of your local
authority.
FOR LCD TV
PREPARATION
If the TV feels cold to the touch, there may be a
small “flicker” when it is turned on. This is normal,
there is nothing wrong with TV.
Some minute dot defects may be visible on the
screen, appearing as tiny red, green, or blue spots.
However, they have no adverse effect on the monitor's performance.
Avoid touching the LCD screen or holding your finger(s) against it for long periods of time. Doing so
may produce some temporary distortion effects on
the screen.
PREPARATION
ACCESSORIES
Ensure that the following accessories are included with your product. If an accessory is missing, please contact the dealer where you purchased the product.
User must use shielded signal interface cables (D-sub 15 pin cable) with ferrite cores to maintain standard
compliance for the product.
PU
TV T
INP
MU
PIP
EZ
LT
UT
PO
WE
MO
TV
DE
DV
TV
PIP
PIC
CH PO
VC
STEZ SOU - PIP W
B ND
CH ER
RA
+ PIP
TIO
SW
INPUDV
AP
T D
INF
CC
VCO
INP
UT
INP
TV
CC
XIT
INP
ME
ENNU RA
TE TIO
SA
RE
TURN ENTE
ME
NU
MU
LT
PIC
TIM
IT
PIP
CH
PIP
PIP
SA
SWA
CD Manual
PIP
INPU
RA
TIO
SA
EN
TER
VO
TIM
ER
CH
MU
TE
PAG
1.5V 1.5V
CH
DE
ME
NU
or
FLASHB
http://www.lgusa.com
www.lg.ca
PIP
Owner’s Manual,
Setup & Operation Guide
for Commercial Mode
Copyright© 2007 LGE,
All Rights Reserved.
CHE
TE
MO
VC
PIP
CH
+ PIP
SW
INPU
AP
INF
CC
EX
PAG
MU
TV
ER
CH
Owner's Manual
PO
WE
CH
ND
LCD TV PLASMA TV
UT
DV
PIP
EZ SOU
INFO
VO
UT
PIP
EZ
FLAS
BACK H
Remote Control,
Batteries
Power Cord
* Slightly wipe stained spot on the exterior only
with the polishing cloth for the product exterior if there is stain or fingerprint on surface of
the exterior.
Polishing Cloth
This feature is not available
for all models.
* Do not wipe roughly when removing stain.
Please be cautions of that excessive pressure
may cause scratch or discoloration.
PREPARATION
LCD TV model only
Option Extras
x2
M4xL22
Torx plus
Star head screw
(Refer to p.7, 15)
Protective Bracket and Bolt for
Power Cord
PREPARATION
(This feature is not available for all models.)
D-sub 15 pin Cable
(Refer to P.12-13, 15)
Only 32/37/42LC5DC*, 32/37/42LC50C*, 42LB5DC, 42LB50C models
Cable Holder
1-Bolt for fixing the
Cable Management
Cable Holder
(Refer to p.12) (Refer to p.12-13)
(Refer to p.12-13)
4-Bolts for stand
assembly
(Refer to p.16)
Only 32/37LC5DC*,
32/37LC50C* models
Only 32/37/42LG500H models
x4
or
x4
Bolts for stand assembly Screw for stand fixing Protection Cover
(Refer to P.15)
(Refer to P.19)
Cable Holder
Plasma TV models only
75 ohm Round Cable
(Except 42PG60C/65C)
D-sub 15 Pin Cable
(Except 42PG60C/65C)
Only 42PG65C model
x4
Cable Management Clip
Bolts for stand
assembly
(Refer to P.14)
Cable Holder
(Except 42PX8DC)
Plug in type
holder
FRONT PANEL CONTROLS
■
Here shown may be somewhat different from your TV.
32/37/42LC5DC*,32/37/42LC50C*, 42LB5DC, 42LB50C
PREPARATION
CH
CHANNEL Buttons
VOL
VOLUME Buttons
ENTER
ENTER Button
MENU
MENU Button
INPUT
INPUT Button
POWER Button
Remote Control Sensor
Power/Standby Indicator
Illuminates red when the TV is in standby mode.
Illuminates green when the TV is switched on.
x4
Tighten the stand with the
four screws (provided as parts
of the TV).
or
x2
Tighten the two of these four screws and
x 2 the two Torx plus star head screws (provided as parts of the TV) to secure the TV.
Tighten the two Torx plus star head screws
with a star head driver bit (not provided
as parts of the TV).
PREPARATION
32LX5DC*, 32LX50C*
PREPARATION
Remote Control Sensor
Power/Standby
Indicator
Illuminates red when the
TV is in standby mode.
Illuminates green when
the TV is switched on.
CH
VOL
ENTER
MENU
INPUT
ON/OFF
ON/OFF Button
INPUT Button
MENU Button
ENTER Button
VOLUME Buttons
CHANNEL Buttons
32/37/42LG500H
CH
Intelligent Sensor
Adjusts picture according to the surrounding
conditions
Power/Standby Indicator
Illuminates red in standby mode.
Illuminates blue when the set is switched on.
VOL
CHANNEL
Buttons
VOLUME
Buttons
ENTER
ENTER Button
MENU
MENU Button
INPUT
INPUT Button
Remote Control Sensor
POWER Button
42PX8DC
INPUT
ENTER
PREPARATION
This TV’s stand is sold, separately.
INPUT
Remote Control Sensor
Power/Standby
Indicator
Illuminates red when the
TV is in standby mode.
Illuminates green when
the TV is switched on.
MENU
ENTER
VOL
CH
POWER Button
INPUT Button
MENU Button
ENTER Button
VOLUME Buttons
CHANNEL Buttons
42PG60C, 42PG65C
Remote Control Sensor
POWER Button
Power/Standby Indicator
Illuminates red in standby mode.
Illuminates blue when the set is switched
on.
INPUT
ENTER
S t a n d (Only 42PG65C model)
INPUT
INPUT
MENU
INPUT
Button
MENU
VOL
ENTER
MENU
INPUT
ENTER
ENTER
MENU
Button
VOL
VOL
ENTER
Button
CH
CH
CH
VOLUME (-,+)
Buttons
CHANNEL (E, D)
Buttons
PREPARATION
BACK PANEL INFORMATION
Here shown may be somewhat different from your TV.
32/37/42LC5DC*,32/37/42LC50C*,
42LB5DC, 42LB50C
32LX5DC*, 32LX50C*
42PX8DC
S-VIDEO
R AUDIO RL/MONO VIDEO S-VIDEO
AV IN 2
ANTENNA IN
AV IN 2
11
11
M.P.I.
42PG60C, 42PG65C
NTENNA IN
S-VIDEO
VIDEO
OR
VIDEO L/MONO AUDIO
PREPARATION
11
AV IN 2
O R
L/MONO AUDIO
■
32/37/42LG500H
M.P.I.
S-VIDEO
VIDEO L/MONO AUDIO R
AV IN 2
AV IN 2
11
11
ANTENNA IN
M.P.I.
13
12
ANTENNA IN
M.P.I.
32/37/42LC5DC*, 32/37/42LC50C*,
42LB5DC, 42LB50C, 32LX5DC*, 32LX50C*, 42PX8DC
DIGITAL
AUDIO
OUT
(OPTICAL)
HDMI/DVI IN
RESET
SERVICE ONLY
M.P.I.
UPDATE
REMOTE
CONTROL
OUT
RGB IN
10
RJP
INTERFACE
VIDEO
COMPONENT IN
1(DVI)
10
VIDEO L/MONO AUDIO R
S-VIDEO
AUDIO
S-VIDEO
(MONO)
AUDIO
AV IN 1
VIDEO
SPEAKER
OUT
AUDIO
IN
42PG60C, 42PG65C
10
RGB IN
DIGITAL
AUDIO OUT
RJP
SPEAKER
INTERFACE OUT
AUDIO
(RGB / DVI)
RGB(PC)
REMOTE
CONTROL
OUT
OPTICAL
SERVICE ONLY
COMPONENT IN
DVI IN
AUDIO
VIDEO
AUDIO
S-VIDEO
VIDEO L (MONO)
PREPARATION
UPDATE
RESET
AV IN 1
HDMI IN
32/37/42LG500H
OPTICAL
DIGITAL SPEAKER OUT
AUDIO OUT
HDMI/DVI IN
RESET
RGB IN
1(DVI)
RGB(PC)
UPDATE
AUDIO
(RGB/DVI)
RS-232C IN
(SERVICE ONLY)
AV IN 1
RJP
INTERFACE
AUDIO
VIDEO
10
COMPONENT IN
S-VIDEO
HDMI/DVI IN, HDMI IN
Connect a HDMI (DVI) connection to either input.
DIGITAL AUDIO OUT
Connect digital audio from various types of equipment.
Note: In standby mode, these ports do not work.
3 13
REMOTE
CONTROL OUT
AUDIO
L/MONO
VIDEO
AV (Audio/Video) IN
Connect audio/video output from an external
device to these jacks.
S-VIDEO
Connect S-Video out from an S-VIDEO device.
COMPONENT IN
Connect a component video/audio device to these
jacks.
M.P.I
RESET/UPDATE/REMOTE CONTROL OUT
10
RJP INTERFACE
SERVICE ONLY
11
RGB IN (PC)
Connect the output from a PC.
AUDIO IN (RGB, DVI)
Connect the audio from a PC or DTV.
Power Cord Socket
For operation with AC power.
Caution: Never attempt to operate the TV on DC
power.
12
ANTENNA IN
Connect over-the air signals to this jack.
SPEAKER OUT 8Ω
11
PREPARATION
STAND INSTALLATION
32/37LC5DC*, 32/37LC50C*
Carefully place the product screen side down
on a cushioned surface that will protect product and screen from damage.
Assemble the product stand with the product
as shown.
PREPARATION
16
42PG65C
Carefully place the TV screen side down on a
cushioned surface to protect the screen from
damage.
NOTE
After inserting the MPI slot/card, install the
product stand.
Assemble the product stand with the product as
shown.
Tighten the 4 bolts securely using the holes in
the back of the TV.
Securely install the 4 bolts provided as shown
below.
ATTACHING THE TV TO A WALL
This feature is not available for all models.
We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards.
Additionally, we recommend that the TV be attached to a wall so it cannot be pulled in a forward direction,
potentially causing injury or damaging the product.
Caution: Please make sure that children don’t climb on or hang from the TV.
■
PREPARATION
■
Insert the TV brackets (or eye-bolts) and bolts to tighten the product to the wall as shown in the picture.
* If your product has the bolts in the eye-bolts position before inserting the eye-bolts, loosen the bolts.
Secure the wall brackets with the bolts (not provided as parts of the product, must purchase separately) on
the wall. Match the height of the bracket that is mounted on the wall to the holes in the product.
Ensure the eye-bolts or brackets are tightened securely.
■
Use a sturdy rope (not provided as parts of the product, must purchase separately) to tie the product. It is safer to tie the rope so it
becomes horizontal between the wall and the product.
SWIVEL STAND
20° (37LC5DC1, 42LC5DC, 42LC50C,
42PX8DC,
42LB5DC, 42LB50C, 42PG65C models)
90° (32LX5DC/S, 32LX50C/S, 32LC5DC/S,
32LC50C/S, 37LC5DC, 37LC50C, 32/37/42LG500H
models)
The TV can be conveniently swivelled on its stand 20°or 90° to the left or right to provide the optimum viewing angle.
17
PREPARATION
ATTACHING THE TV TO A DESK
■
Here shown may be somewhat different from your TV.
The TV must be attached to a desk so it cannot be pulled in a forward/backward direction, potentially causing injury or damaging the product.
10 mm)
* S c r e w s - M 5 x L ( t a b l e d e p t h + 8~1
ex) table depth-15mm: Bolts - M5 x 25
32/37/42LC5DC*, 32/37/42LC50C*, 42LB5DC, 42LB50C
PREPARATION
Stand
4-Screws
(not provided as parts of the product)
Desk
32LX5DC*, 32LX50C*
Stand
4-Screws
(not provided as parts of the product)
42PX8DC
Stand
2-Screws
(not provided as parts of the product)
42PG65C
Stand
4-Screws
(not provided as parts of the product)
Desk
32/37/42LG500H
Stand
4-Screws
(not provided as parts of the product)
18
Desk
32/37/42LG500H
Stand
1-Screw
(provided as parts of the product)
Desk
PREPARATION
WARNING
To prevent TV from falling over, the TV should be securely attached to the floor/wall per installation
instructions. Tipping, shaking, or rocking the machine may cause injury.
VESA WALL MOUNTING
This product accepts a VESA-compliant mounting interface pad. (optional)
There 4 threaded holes are available for attaching the bracket.
■ This feature is not available for all models.
Model
VESA
(A * B)
32LC5DC*, 32LC50C*, 32LX5DC*,
32LX50C*, 32LG500H
200 * 100
37LG500H, 42LG500H
200 * 200
32/37/42LC5DC*, 32/37/42LC50C*,
42LB5DC, 42LB50C
600 * 400
42PG60C
400 * 400
42PX8DC
600 * 400
Product
LCD TV
PLASMA TV
NOTE
Screw length needed depends on the wall mount used. For further information, refer to the VESA
Wall Mounting Instruction Guide.
DESKTOP PEDESTAL INSTALLATION
For proper ventilation, allow a clearance of 4inches on each
side from the wall.
■
Image shown may differ from your TV.
■
This feature is not available for all models.
4 inches
4 inches
4 inches
4 inches
CAUTION
Ensure adequate ventilation by following the clearance recommendations.
19
PREPARATION
ANTENNA OR CABLE CONNECTION
1. Antenna (Analog or Digital)
Wall Antenna Socket or Outdoor Antenna without a Cable Box
Connections.
For optimum picture quality, adjust antenna direction if needed.
PREPARATION
Multi-family Dwellings/Apartments
(Connect to wall antenna socket)
Wall
Antenna
Socket
ANTENNA IN
M.P.I.
RF Coaxial Wire (75 ohm)
Outdoor
Antenna
(VHF, UHF)
Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)
Copper Wire
Be careful not to bend the bronze wire
when connecting the antenna.
2. Cable
ANTENNA IN
M.P.I.
Cable TV
Wall Jack
RF Coaxial Wire (75 ohm)
ANTENNA IN
UHF
M.P.I.
Signal
Amplifier
Antenna
VHF
To improve the picture quality in a poor signal area, please purchase a signal amplifier and install properly.
If the antenna needs to be split for two TV’s, install a 2-Way Signal Splitter.
■ If the antenna is not installed properly, contact your dealer for assistance.
■
■
NOTE
20
The TV will let you know when the analog, cable, and digital channel scans are complete.
EXTERNAL EQUIPMENT SETUP
■
■
To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment.
This part of external equipment setup mainly use picture for LCD TV(Except 32/37/42LG500H) models.
HD RECEIVER SETUP
This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you
do receive digital signals from a digital set-top box or other digital external device, refer to the figure as shown
below.
When connecting Component cable
EXTERNAL EQUIPMENT SETUP
1. How to connect
Connect the video outputs (Y, PB, PR) of the digital set
top box to the C O M P O N E N T I N V I D E O jacks on
the set. Match the jack colors
(Y = green, PB = blue, and PR = red).
PB
PR
DIGITAL
AUDIO
OUT
(OPTICAL)
HDMI/DVI IN
■
■
M.P.I.
1(DVI)
2. How to use
Connect the audio output of the digital set-top box to
the C O M P O N E N T I N A U D I O jacks on the set.
Turn on the digital set-top box.
(Refer to the owner’s manual for the digital set-top box.)
Select C o m p o n e n t input source with using the I N P U T
button on the remote control.
Signal
Component
HDMI1/DVI,
HDMI2
480i
Yes
No
480p
Yes
Yes
720p
Yes
Yes
1080i
Yes
Yes
1080p
Yes
Yes
RJP
RFACE
VIDEO
AUDIO
S-VIDEO
COMPONENT IN
* 42LB5DC, 42LB50C model only
21
EXTERNAL EQUIPMENT SETUP
When connecting HDMI cable
1. How to connect
EXTERNAL EQUIPMENT SETUP
Connect the digital set-top box to H D M I / D V I I N
1 ( D V I ) or 2 jack on the set.
No separated audio connection is necessary.
HDMI supports both audio and video.
HDMI/DVI IN
M.P.I
1(DVI)
2. How to use
■
■
Turn on the digital set-top box.
(Refer to the owner’s manual for the digital set-top box.)
VIDEO
RJP
INTERFACE
Select H D M I 1 / D V I or H D M I 2 input source with using
the I N P U T button on the remote control.
COMPONENT IN
NOTE
If the device does not support Auto HDMI, you need to set
the output resolution appropriately.
HDMI-DTV OUTPUT
22
DIGITAL
AUDIO
OUT
(OPTICAL)
AUDIO
When connecting HDMI to DVI cable
DIGITAL
AUDIO
OUT
(OPTICAL)
HDMI/DVI IN
RESET
SERVICE ONLY
M.P.I.
1(DVI)
UPDATE
REMOTE
CONTROL
OUT
RGB IN
VIDEO
RJP
INTERFACE
AUDIO
COMPONENT IN
S-VIDEO
(MONO)
AUDIO
AV IN 1
VIDEO
SPEAKER AUDIO
IN
OUT
(RGB, DVI)
DVI-DTV OUTPUT
EXTERNAL EQUIPMENT SETUP
1. How to connect
Connect the DVI output of the digital set-top box to the H D M I / D V I I N 1 ( D V I ) or 2 jack on the set.
Connect the audio output of the digital set-top box to the A U D I O I N ( R G B , D V I ) jack on the set.
2. How to use
■
Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.)
■
Select H D M I 1 / D V I or H D M I 2 input source with using the I N P U T button on the remote control.
23
EXTERNAL EQUIPMENT SETUP
DVD SETUP
When connecting Component cable
1. How to connect
EXTERNAL EQUIPMENT SETUP
Connect the video outputs (Y, PB, PR) of the DVD to
the C O M P O N E N T I N V I D E O jacks on the set.
Match the jack colors
(Y = green, PB = blue, and PR = red).
Connect the audio outputs of the DVD to the
C O M P O N E N T I N A U D I O jacks on the set.
2. How to use
PB
PR
■
Select C o m p o n e n t input source with using the I N P U T
button on the remote control.
DIGITAL
AUDIO
OUT
(OPTICAL)
RJP
ERFACE
VIDEO
AUDIO
COMPONENT IN
Refer to the DVD player's manual for operating instructions.
Component Input ports
To get better picture quality, connect a DVD player to the component input ports as shown below.
Component ports on the TV
Video output ports
on DVD player
24
PB
PR
PB
PR
B-Y
R-Y
Cb
Cr
Pb
Pr
M.P.I.
1(DVI)
Turn on the DVD player, insert a DVD.
HDMI/DVI IN
■
■
S-VIDEO
When connecting with an S-Video cable
AUDIO
1. How to connect
Connect the S-VIDEO output of the DVD to the
S - V I D E O input on the set.
Connect the audio outputs of the DVD to the A U D I O
input jacks on the set.
■
Turn on the DVD player, insert a DVD.
■
■
Select A V 1 input source with using the I N P U T button on
the remote control.
If connected to A V I N 2, select A V 2 input source.
■
Refer to the DVD player's manual for operating instructions.
GITAL
UDIO
OUT
TICAL)
RESET
REMOTE
CONTROL
OUT
M.P.I.
UPDATE
S-VIDEO
AUDIO
NT IN
(MONO)
VIDEO
AUDIO
AV IN 1
SPE
When connecting HDMI cable
1. How to connect
Connect the HDMI output of the DVD to the
H D M I / D V I I N 1 ( D V I ) or 2 jack on the set.
No separated audio connection is necessary.
HDMI supports both audio and video.
DIGITAL
AUDIO
OUT
(OPTICAL)
HDMI/DVI IN
2. How to use
■
Select H D M I 1 / D V I or H D M I 2 input source with using
the I N P U T button on the remote control.
■
Refer to the DVD player's manual for operating instructions.
EXTERNAL EQUIPMENT SETUP
2. How to use
S-VIDEO
M.P.I
1(DVI)
VIDEO
RJP
INTERFACE
AUDIO
COMPONENT IN
NOTE
If the device does not support Auto HDMI, you need to
set the output resolution appropriately.
HDMI-DVD OUTPUT
25
EXTERNAL EQUIPMENT SETUP
VCR SETUP
To avoid picture noise (interference), leave an adequate distance between the VCR and TV.
■ Use the ISM feature in the Option menu to avoid having a fixed image remain on the screen for a long period
of time. (Only Plasma TV model). If the 4:3 picture format is used; the fixed images on the sides of the screen
may remain visible on the screen. This phenomenon is common to all manufactures and in consequence the
manufactures warranty does not cover the product bearing this phenomenon.
■
When connecting with an antenna
EXTERNAL EQUIPMENT SETUP
ANTENNA IN
M.P.I.
M.P
.I.
S-VIDEO
VIDEO
ANT OUT
ANT IN
OUTPUT
SWITCH
Wall Jack
Antenna
1. How to connect
Connect the RF antenna out socket of the VCR to the A n t e n n a socket on the set.
Connect the antenna cable to the RF antenna in socket of the VCR.
2. How to use
26
■
Set VCR output switch to 3 or 4 and then tune TV to the same channel number.
■
Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.)
(
ANT IN
S-VIDEO
ANT OUT
OUTPUT
SWITCH
When connecting with a RCA cable
1. How to connect
V I D E O jacks between TV and
Connect the A U D I O/V
VCR. Match the jack colors (Video = yellow, Audio Left
= white, and Audio Right = red)
M.P.I.
TAL
DIO
UT
CAL)
VIDEO
RESET
SERV
REMOTE
CONTROL
OUT
M.P.I.
UPDATE
■
Insert a video tape into the VCR and press PLAY on the
VCR. (Refer to the VCR owner’s manual.)
(MONO)
S-VIDEO
AUDIO
VIDEO
AUDIO
T IN
AV IN 1
Select A V 1 input source with using the I N P U T button on
the remote control.
■ If connected to A V I N 2, select A V 2 input source.
SPEAKE
OUT
■
NOTE
If you have a mono VCR, connect the audio cable from the
VCR to the A U D I O
L / M O N O jack of the set.
EXTERNAL EQUIPMENT SETUP
2. How to use
When connecting with an S-Video cable
1. How to connect
ANT IN
S-VIDEO
ANT OUT
OUTPUT
SWITCH
VIDEO
M.P.I.
Connect the S-VIDEO output of the VCR to the
S - V I D E O input on the set.
Connect the audio outputs of the VCR to the A U D I O
input jacks on the set.
RESET
SER
M.P.I.
2. How to use
■
GITAL
AUDIO
OUT
PTICAL)
UPDATE
Insert a video tape into the VCR and press PLAY on the VCR.
(Refer to the VCR owner’s manual.)
AUDIO
■
Select A V 1 input source with using the I N P U T button on
the remote control.
■
If connected to A V I N 2, select A V 2 input source.
ENT IN
The picture quality is improved: compared to normal
composite (RCA cable) input.
(MONO)
AUDIO
AV IN 1
VIDEO
SPEAK
OUT
CAUTION
NOTE
S-VIDEO
REMOTE
CONTROL
OUT
Do not connect to both Video
and S-Video at the same time. In
the event that you connect both
Video and the S-Video cables,
only the S-Video will work.
27
EXTERNAL EQUIPMENT SETUP
OTHER A/V SOURCE SETUP
Camcorder
1. How to connect
Video Game Set
V I D E O jacks
Connect the A U D I O/V
between TV and external equipment.
Match the jack colors.
(Video = yellow, Audio Left = white, and
Audio Right = red)
VIDEO
■
Select A V 2 input source with using the
I N P U T button on the remote control.
■
If connected to A V I N 1 input, select A V 1
input source.
■
Operate the corresponding external equipment.
S-VIDEO
VIDEO L/MONO AUDIO R
EXTERNAL EQUIPMENT SETUP
2. How to use
AV IN 2
DIGITAL AUDIO OUTPUT
i.e) 32/37/42LC5DC*, 32/37/42LC50C*,
42LB5DC, 42LB50C
Send the TV’s audio to external audio equipment via the Digital Audio Output (Optical) port.
1. How to connect
Connect one end of an optical cable to the TV Digital
Audio (Optical) Output port.
Connect the other end of the optical cable to the
digital audio (optical) input on the audio equipment.
DIGITAL
AUDIO
OUT
(OPTICAL)
HDMI/DVI IN
Set the “TV Speaker option - Off” in the AUDIO
menu. (G p . 5 8). See the external audio equipment
instruction manual for operation.
NOTE
When connecting with external audio equipments, such as amplifiers or speakers, please turn the TV speakers off. (G p . 5 8)
CAUTION
28
Do not look into the optical output port. Looking at the
laser beam may damage your vision.
M.P.I.
1(DVI)
RJP
NTERFACE
VIDEO
AUDIO
COMPONENT IN
S-V
PC SETUP
This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings.
When connecting D-sub 15pin cable
SERVICE ONLY
1. How to connect
REMOTE
CONTROL
OUT
ATE
RGB IN
(MONO)
VIDEO
AUDIO
IN
(RGB, DVI)
SPEAKER
OUT
AUDIO
AV IN 1
EXTERNAL EQUIPMENT SETUP
Connect the RGB output of the PC to the R G B I N
jack on the set.
Connect the PC audio output to the A U D I O I N
( R G B , D V I ) jack on the set.
2. How to use
■
Turn on the PC and the set.
■
Select R G B - P C input source with using the I N P U T button
on the remote control.
When connecting HDMI to DVI cable
RGB OUTPUT
AUDIO
1. How to connect
Connect the DVI output of the PC to the H D M I / D V I
I N 1 ( D V I ) jack on the set.
DIGITA
AUDIO
OUT
(OPTICA VICE ONLY
HDMI/DVI IN
1(DVI)
RGB IN
Connect the PC audio output to the A U D I O I N
( R G B / D V I) jack on the set.
ER
VIDEO
RJP
INTERFACE
COMPONENT
AUDIO
IN
(RGB, DVI)
2. How to use
■
Turn on the PC and the set
■
Select H D M I 1 / D V I input source with using the I N P U T
button on the remote control.
DVI-PC OUTPUT
AUDIO
29
EXTERNAL EQUIPMENT SETUP
NOTES
Depending on the graphics card, DOS mode may
not work if a HDMI to DVI Cable is in use.
Check the image on your TV. There may be noise
associated with the resolution, vertical pattern,
contrast or brightness in PC mode. If noise is present, change the PC output to another resolution,
change the refresh rate to another rate or adjust
the brightness and contrast on the VIDEO menu
until the picture is clear. If the refresh rate of the
EXTERNAL EQUIPMENT SETUP
Supported Display Specifications (RGB/HDMI1-PC)
Resolution
Horizontal
Frequency(KHz)
Vertical
Frequency(Hz)
640x350
31.469
70.08
640x480
31.469
37.861
37.500
59.94
72.80
75.00
800x600
35.156
37.879
48.077
46.875
56.25
60.31
72.18
75.00
1024x768
48.363
56.476
60.023
60.00
70.06
75.02
1280x768
47.700
60.00
1360x768
47.720
59.799
1366x768
47.130
59.658
PC graphic card can not be changed, change the
PC graphic card or consult the manufacturer of
the PC graphic card.
Avoid keeping a fixed image on the screen for a
long period of time. The fixed image may become
permanently imprinted on the screen.
The synchronization input form for Horizontal and
Vertical frequencies is separate.
Supported Display Specifications (HDMI2-DTV)
Resolution
Horizontal
Frequency(KHz)
Vertical
Frequency(Hz)
720x480
31.500
31.469
60.00
59.94
1280x720
44.960
45.000
59.94
60.00
1920x1080i
33.720
33.750
59.94
60.00
Supported Display Specifications (Y, CB /PB, CR /PR)
Resolution
Horizontal
Frequency(KHz)
Vertical
Frequency(Hz)
720x480
15.73
15.73
31.47
31.50
59.94
60.00
59.94
60.00
1280x720
44.96
45.00
59.94
60.00
1920x1080i
33.72
33.75
59.94
60.00
Supported Display Specifications (RGB/HDMI1-DTV)
Resolution
720x480
Horizontal
Frequency(KHz)
Vertical
Frequency(Hz)
31.50
60.00
31.47(HDMI1-DTV:31.469) 59.94
* RGB-DOS mode only: 640x350
1280x720
44.96
45.00
59.94
60.00
1920x1080i
33.72
33.75
59.94
60.00
* Except 42PG60C/65C models in HDMI1-PC mode.
30
* 42LB5DC, 42LB50C
Supported Display Specifications (RGB/HDMI1-PC)
Horizontal
Frequency(KHz)
Vertical
Frequency(Hz)
31.469
70.08
640x480
31.469
37.861
37.500
Supported Display Specifications (HDMI2-DTV)
Horizontal
Frequency(KHz)
Vertical
Frequency(Hz)
720x480
31.500
31.469
60.00
59.94
59.94
72.80
75.00
1280x720
44.960
45.000
59.94
60.00
800x600
35.156
37.879
48.077
46.875
56.25
60.31
72.18
75.00
1920x1080
33.720
33.750
67.500
59.94
60.00
60.00
1024x768
48.363
56.476
60.023
60.00
70.06
75.02
1280x768
47.700
60.00
1360x768
47.720
59.799
1366x768
47.130
59.658
1280x1024
63.668
59.895
65.317
59.978
640x350
(RGB only)
(RGB only)
1400x1050
(RGB only)
1600x1200
74.537
59.869
1920x1080
66.587
59.934
1920x1200
74.038
59.950
Supported Display Specifications (Y, CB /PB, CR /PR)
Resolution
Horizontal
Frequency(KHz)
Vertical
Frequency(Hz)
720x480
15.73
15.73
31.47
31.50
59.94
60.00
59.94
60.00
1280x720
44.96
45.00
59.94
60.00
1920x1080
33.72
33.75
67.50
59.94
60.00
60.00
EXTERNAL EQUIPMENT SETUP
Resolution
Resolution
* RGB-DOS mode only: 640x350
Supported Display Specifications (RGB/HDMI1-DTV)
Resolution
720x480
Horizontal
Frequency(KHz)
Vertical
Frequency(Hz)
31.50
60.00
31.47(HDMI1-DTV:31.469) 59.94
1280x720
44.96
45.00
59.94
60.00
1920x1080
33.72
33.75
59.94
60.00
59.94
67.43(HDMI1-DTV:67.5)
31
WATCHING TV / CHANNEL CONTROL
REMOTE CONTROL FUNCTIONS
When using the remote control, aim it at the remote control sensor on the TV.
POWER Turns your TV or any other programmed equipment on
or off, depending on mode.
TV INPUT
In AV 1-2, Component, RGB, HDMI1/DVI, and HDMI2
input sources, screen returns to the last TV channel.
External input modes rotate in regular sequence: TV, AV1INPUT 2, Component, RGB, HDMI1/DVI and HDMI2.
INPUT
TV
MODE
TV
POWER
INPUT
DVD
MULTI
VCR
PIP CH - PIP CH + PIP INPUT
PIP
EZ PIC
EZ SOUND
INFO
SWAP
MULTI Selects: RGB,HDMI1/DVI, HDMI2 and Component input
sources.
WATCHING TV / CHANNEL CONTROL
Adjusts brightness on screen.
MENU
EXIT
RATIO
SAP
PIP CH +/- Changes the PIP channel. G p . 4 2
PIP INPUT Select the connected input source for the sub-picture. G p.41
ENTER
Selects the factory preset picture depend on the viewing
EZ PIC environment. p.45
TIMER
EZ SOUND Selects the factory preset sound for type of program.
p.55
SWAP(or PIP
SWAP) Exchange the main/sub images. G p . 4 2
VCR/DVD Control video cassette recorders or DVD players.
control buttons
NUMBER button
— (DASH) Used to enter a program number for multiple program
channels such as 2-1, 2-2, etc.
FLASH BACK Tune to the last channel viewed.
32
CC
PIP Switches the sub picture Double Window or off mode. G p.41-42
CH PAGE
VOL
MUTE
FLASH
BACK
(Only 42PG60C, 42PG65C, 32/37/42LG500H models)
TV
POWER
DVD
CC
INPUT
VCR
STB
RATIO
MODE Select the remote’s operating mode: TV, DVD, VCR (or
STB).
RATIO Change the aspect ratio.
p.43- 4 4
CC Select a closed caption. G p.62 (*In DTV/CADTV mode G p.63)
THUMBSTICK Navigate the on-screen menus and adjust the system set(Up/Down/Left tings to your preference.
ENTER
/Right/ENTER)
EXIT(or Clears all on-screen displays and returns to TV viewing
RETURN) from any menu.
MENU
INFO i
MENU Displays the main menu.
INFO Display information at the top of the screen.
TIMER
CH
VOL
MUTE
FLASHBK
PIP
PIP CH-
VOLUME UP Increase/decrease the sound level.
/DOWN
TIMER Select the amount of time before your TV turns off automatically. G p .6 9
MUTE Switch the sound on or off. G p.34
CHANNEL Select available channels.
UP/DOWN
PAGE Move from one full set of screen information to the next one.
UP/DOWN
WATCHING TV / CHANNEL CONTROL
RETURN
SAP
PIP CH+ PIP SWAP PIP INPUT
Installing Batteries
■
Open the battery compartment cover on the back
side and install the batteries matching correct
polarity (+ with +, - with -).
■
Install two 1.5V AA batteries(or 1.5V AAA)
Don’t mix old or used batteries with new ones.
■
Close cover.
33
MOVIE & TV RATING
Movie Rating (MPAA) -for USA only
Blocks movies according to the movie ratings limits specified, so children cannot view
certain movies. You can set the ratings limit by blocking out all the movies with the
ratings above a specified level. Keep in mind that the movie ratings limit only applies
to movies shown on TV, not TV programs, such as soap operas.
SETUP
VIDEO
After inputting the password, use the D or E or
or
button to choose M o v i e R a t i n g.
AUDIO
TIME
OPTION
Press the G or
button and then use the D or E
or
or
button to select G , P G, P G - 1 3, R ,
N C - 1 7 or X .
■ G (General audiences)
■ PG (Parental guidance suggested)
■ PG-13 (Parents strongly cautioned)
■ R (Restricted)
■ NC-17 (No one 17 and under admitted)
■ X (Adult only)
■ Blocking Off (Permits all programs)
SCREEN
Movie Rating
TV Rating-Children
TV Rating-General
Downloadable Rating
SETUP
VIDEO
AUDIO
TIME
OPTION
SCREEN
LOCK
If you set PG-13: G and PG movies will be available,
PG-13, R, NC-17 and X will be blocked.
Lock System
Set Password
Block Channel
Movie Rating
TV Rating-Children
TV Rating-General
Aux. Block
Downloadable Rating
For USA
SETUP
VIDEO
TIME
OPTION
SCREEN
or
Lock System
Set Password
Block Channel
Movie Rating
TV Rating-Children
TV Rating-General
LOCK
Aux. Block
PG
PG-13
NC-17
Blocking Off
For Canada
Lock System
Set Password
Block Channel
TV Rating-English
TV Rating-French
Aux. Block
Downloadable Rating
Downloadable Rating
button and then use the D or E or
Press the G or
or
button to select D i m 0, D i m 1, D i m 2, or D i m 3.
SETUP
Press the
or
or
VIDEO
or
button and then use the D or E
button to select D 1 L 1, D 1 L 2, or D 1 L 3.
AUDIO
TIME
OPTION
Press E X I T or R E T U R N button to return to TV viewing
or press M E N U button to return to the previous menu.
SCREEN
LOCK
Lock System
Set Password
Block Channel
Movie Rating
TV Rating-Children
TV Rating-General
Downloadable Rating
Dim0
Dim1
Dim2
Dim3
PARENTAL CONTROL / RATING
Downloadable Rating
After inputting the password, use the D or E or
button to choose D o w n l o a d a b l e R a t i n g.
Block Channel
Aux. Block
AUDIO
Set Password
LOCK
Press E X I T or R E T U R N button to return to TV viewing or press M E N U button to return to the previous
menu.
Lock System
Aux. Block
Downloadable Rating G
NOTE
This function may become available in the future and
will be available only for digital channel signal.
This function operates only when TV has received
Region5 Rating data.
Based on rating table, your TV's OSD (On
Screen Display) may differ slightly from what
is shown in this manual.
77
PARENTAL CONTROL /RATINGS
TV Rating Children -for USA only
Prevents children from watching certain children's TV programs, according to
the ratings limit set. The children rating does not apply to other TV programs.
Unless you block certain TV programs intended for mature audiences in the TV
Rating - sub menu, your children can view those programs.
SETUP
VIDEO
AUDIO
TIME
OPTION
After inputting the password, use the D or E or
button to choose T V R a t i n g - C h i l d r e n.
SCREEN
or
Lock System
Set Password
Block Channel
Movie Rating
TV Rating-Children
TV Rating-General
LOCK
Aux. Block
Downloadable Rating
button and then use the D or E or
Press the G or
or
button to select A g e, or F a n t a s y V i o l e n c e.
button and then use the D or E or
Press the G or
or
button to select block options.
SETUP
VIDEO
AUDIO
Age (applies to TV-Y, TV-Y7)
■ Fantasy Violence (applies to TV-Y7)
■
TIME
OPTION
SCREEN
Lock System
Set Password
Block Channel
Movie Rating
TV Rating-Children
TV Rating-General
Age
Fantasy Violence
LOCK
Aux. Block
Press E X I T or R E T U R N button to return to TV viewing
or press M E N U button to return to the previous menu.
Downloadable Rating
TV Rating General -for USA only
Based on the ratings, blocks certain TV programs that you
and your family do not want to view.
SETUP
PARENTAL CONTROL / RATING
After inputting the password, use the D or E or
button to choose T V R a t i n g - G e n e r a l.
VIDEO
or
AUDIO
TIME
OPTION
button and then use the D or E or
Press the G or
or
button to select A g e, D i a l o g u e, L a n g u a g e,
S e x or V i o l e n c e.
button and then use the D or E or
Press the G or
or
button to select block options.
Age (applies to TV-G,TV-PG,TV-14,TV-MA)
■ Dialogue-sexual dialogue (applies to TV-PG,TV-14)
■ Language-adult language (applies to TV-PG,TV-14,TV-MA)
■ Sex-sexual situations (applies to TV-PG,TV-14,TV-MA)
■ Violence (applies to TV-PG,TV-14,TV-MA)
■
SCREEN
Press E X I T or R E T U R N button to return to TV viewing
or press M E N U button to return to the previous menu.
Set Password
Block Channel
Movie Rating
TV Rating-Children
TV Rating-General
LOCK
Aux. Block
Downloadable Rating
SETUP
VIDEO
AUDIO
TIME
OPTION
SCREEN
Lock System
Set Password
Block Channel
Movie Rating
TV Rating-Children
TV Rating-General
LOCK
Aux. Block
Lock System
Downloadable Rating
Age
Dialogue
Language
Sex
Violence
78
TV Rating English - for CANADA only
Prevents children from watching certain children's TV programs, according to
the ratings limit set. The children rating does not apply to other TV programs.
Unless you block certain TV programs intended for mature audiences in the TV
Rating - sub menu, your children can view those programs.
SETUP
VIDEO
AUDIO
TIME
OPTION
After inputting the password, use the D or E or
button to choose T V R a t i n g - E n g l i s h.
or
Set Password
Block Channel
TV Rating-English
TV Rating-French
Aux. Block
LOCK
Downloadable Rating
Press the G or
button and then use the D or E or
or
button to select E, C, C 8 +, G, P G, 1 4 +, 1 8 +,
or Blocking Off.
E(Exempt)
C(Children)
■ C8+(Children eight years and older)
■ G(General programming, suitable for all audiences)
■ PG(Parental Guidance )
■ 14+(Viewers 14 years and older)
■ 18+(Adult programming)
■ Blocking Off(Permits all programs)
■
SETUP
VIDEO
■
SCREEN
Lock System
AUDIO
TIME
OPTION
SCREEN
Lock System
Set Password
Block Channel
TV Rating-English
TV Rating-French
Aux. Block
LOCK
Downloadable Rating
C8+
PG
14+
18+
Blocking Off
Press E X I T or R E T U R N button to return to TV viewing
or press M E N U button to return to the previous menu.
TV Rating French - for CANADA only
Based on the ratings, blocks certain TV programs that you
and your family do not want to view.
After inputting the password, use the D or E or
button to choose T V R a t i n g - F r e n c h.
or
SETUP
VIDEO
AUDIO
TIME
button and then use the D or E or
Press the G or
or
button to select E, G, 8 ans+, 13 ans+, 16 ans+,
18 ans+, or Blocking Off.
■ E(Exempt)
■ G(General)
■ 8 ans+(General-Not convenient for little children)
■ 13 ans+(Not convenient for children of 13 years and
younger)
■ 16 ans+(Not convenient for children of 16 years and
younger)
■ 18 ans+(This programs is only for adults)
■ Blocking Off(Permits all programs)
OPTION
SCREEN
Press E X I T or R E T U R N button to return to TV viewing
or press M E N U button to return to the previous menu.
Set Password
Block Channel
TV Rating-English
TV Rating-French
Aux. Block
LOCK
Downloadable Rating
SETUP
VIDEO
AUDIO
TIME
OPTION
SCREEN
Lock System
Set Password
Block Channel
TV Rating-English
TV Rating-French
Aux. Block
LOCK
Downloadable Rating
Lock System
PARENTAL CONTROL / RATING
8 ans+
13 ans+
16 ans+
18 ans+
Blocking Off
79
APPENDIX
TROUBLESHOOTING
The operation does not work normally.
Check to see if there is any object between the product and the remote control
causing obstruction. Ensure you are pointing the remote control directly at the TV.
■ Ensure that the batteries are installed with correct polarity (+ to +, - to -).
■ Ensure that the correct remote operating mode is set: TV, VCR etc.
■ Install new batteries.
■
The remote control
doesn’t work
Power is suddenly
turned off
Is the sleep timer set?
■ Check the power control settings. Power interrupted.
■ No broadcast on station tuned with Auto off activated.
■
The video function does not work.
Check whether the product is turned on.
Try another channel. The problem may be with the broadcast.
■ Is the power cord inserted into wall power outlet?
■ Check your antenna direction and/or location.
■ Test the wall power outlet, plug another product’s power cord into the outlet
where the product’s power cord was plugged in.
■
■
No picture &No sound
Picture appears slowly
after switching on
■
This is normal, the image is muted during the product startup process. Please
contact your service center, if the picture has not appeared after five minutes.
Adjust Color in menu option.
■ Keep a sufficient distance between the product and the VCR.
■ Try another channel. The problem may be with the broadcast.
■ Are the video cables installed properly?
■ Activate any function to restore the brightness of the picture.
■
APPENDIX
No or poor color
or poor picture
Horizontal/vertical bars
or picture shaking
■
Check for local interference such as an electrical appliance or power tool.
Station or cable product experiencing problems, tune to another station.
Station signal is weak, reorient antenna to receive weaker station.
■ Check for sources of possible interference.
■
Poor reception on
some channels
Lines or streaks
in pictures
80
■
■
Check antenna (Change the direction of the antenna).
The audio function does not work.
Press the VOL or VOLUME button.
■ Sound muted? Press MUTE button.
■ Try another channel. The problem may be with the broadcast.
■ Are the audio cables installed properly?
■
Picture OK & No sound
No output from one
of the speakers
Unusual sound from
inside
the product
■
Adjust Balance in menu option.
■
A change in ambient humidity or temperature may result in an unusual noise
when the product is turned on or off and does not indicate a fault with the
product.
There is a problem in PC mode. (Only PC mode applied)
The signal is out of range
Vertical bar or stripe on
background &
Horizontal Noise &
Incorrect position
Adjust resolution, horizontal frequency, or vertical frequency.
Check the input source.
■
Work the Auto configure or adjust clock, phase, or H/V position. (Option)
■
Check the signal cable.
Reinstall the PC video card.
■
APPENDIX
Screen color is unstable
or single color
■
■
81
APPENDIX
MAINTENANCE
Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you can
enjoy your new TV.
Caution: Be sure to turn the power off and unplug the power cord before you begin any cleaning.
Cleaning the Screen
Here’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm
water and a little fabric softener or dish washing detergent. Wring the cloth until it’s almost dry, and then
use it to wipe the screen.
Make sure the excess water is off the screen, and then let it air-dry before you turn on your TV.
Cleaning the Cabinet
To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth.
■ Please be sure not to use a wet cloth.
■
Extended Absence
CAUTION
If you expect to leave your TV dormant for a long time (such as a vacation), it’s a good idea to unplug
the power cord to protect against possible damage from lightning or power surges.
PRODUCT SPECIFICATIONS
MODELS
Dimensions
(Width x Height
x Depth)
APPENDIX
Weight
42PG65C
(42PG65C-UA)
41.1 x 28.9 x12.1 inches
1044.4 x 735.4 x 308.0 mm
With stand
(Only 42PG65C)
Without stand
With stand (Only 42PG65C)
Without stand
MODELS
82
42PG60C
(42PG60C-UA)
41.1 x 26.7x 3.1 inches
1044.4 x680.5x 79.6mm
41.1 x 26.7x 4.2 inches
1044.4 x680.5x 107.6mm
55.1 pounds / 25.0 kg
61.2 pounds / 27.8 kg
55.1 pounds / 25.0 kg
32LG500H
(32LG500H-UA)
37LG500H
(37LG500H-UA)
42LG500H
(42LG500H-UA)
36.1 x 26.9 x 11.5 inches 40.4 x 28.8 x 11.5 inches
918.6 x 684.8 x 293.4 mm 1026.2 x 734.0 x 293.4 mm
Dimensions
(Width x Height
x Depth)
With stand
31.3 x 23.5 x 8.9 inches
797 x 597 x 227.3 mm
Without stand
31.3 x 21.9 x 3.9 inches
797 x 558.6 x 100.5 mm
36.1 x 24.9 x 3.4 inches
918.6 x 632.8 x 88 mm
40.4 x 27.0 x 4.4 inches
1026.2 x 687.9 x 111.8 mm
Weight
With stand
Without stand
21.6 pounds / 9.82 kg
18.3 pounds / 8.34 kg
41.6 pounds / 18.8 kg
35.2 pounds / 15.9 kg
49.1 pounds / 22.3 kg
43.2 pounds / 19.6 kg
PRODUCT SPECIFICATIONS
32LC5DC/S/B
(32LC5DC/S/B-UA)
32LC50C/S/B
(32LC50C/S/B-UA)
37LC5DC/1/B
(37LC5DC/1/B-UA)
37LC50C/B
(37LC50C/B-UA)
42LC5DC
(42LC5DC-UA)
42LC50C
(42LC50C-UA)
32LX5DC/S
(32LX5DC/S-UA)
32LX50C/S
(32LX50C/S-UA)
Width x Height x Depth
(inches/mm)
With Stand
31.8 x 23.9 x 9.8 inches
806.6 x 607.5 x 249.0 mm
31.8 x 21.7 x 3.8 inches
806.6 x 552.3 x 97.2 mm
Without Stand
33.7 pounds / 15.3kg
27.6 pounds / 12.5 kg
Weight (pounds / kg)
With Stand
Without Stand
Width x Height x Depth
(inches/mm)
With Stand
36.5 x 27.4 x 10.4 inches
926.8 x 695.8 x 264.6 mm
Without Stand
36.5 x24.8 x 4.2 inches
926.8 x 629.8 x 107.4 mm
Weight (pounds / kg)
With Stand
Without Stand
47.2 pounds / 21.4 kg
36.8 pounds / 16.7 kg
Width x Height x Depth
(inches/mm)
With Stand
40.7 x 29.6 x 11.6 inches
1033.1 x 750.7 x 294.2 mm
Without Stand
40.7 x 27.0x 4.3 inches
1033.1 x 686.5 x 110.2 mm
Weight (pounds / kg)
With Stand
Without Stand
61.3 pounds / 27.8 kg
47.2 pounds / 21.4 kg
Width x Height x Depth
(inches/mm)
With Stand
36.3 x 24.2 x 11.3 inches
922.0 x 615.0x 288.0 mm
Without Stand
36.3 x 21.5 x 3.9 inches
922.0 x 546.0 x 98.0 mm
Weight (pounds / kg)
With Stand
39.0 pounds / 17.7 kg
30.4 pounds / 13.8 kg
Without Stand
Width x Height x Depth
(inches/mm)
42PX8DC
(42PX8DC-UA)
Weight (pounds / kg)
With Stand
46.7 x 28.1 x 10.6 inches
1186.0 x 714.0 x 270.0 mm
Without Stand
46.7 x 25.7 x 3.9 inches
1186.0 x 654.0 x 99.0 mm
With Stand
72.5 pounds / 32.9 kg
55.6 pounds / 25.2 kg
Without Stand
Width x Height x Depth
(inches/mm)
With Stand
Without Stand
Weight (pounds / kg)
40.7 x 29.6 x 11.6 inches
1033.1 x 750.7 x 294.2 mm
40.7 x 27.0x 4.3 inches
1033.1 x 686.5 x 110.2 mm
61.3 pounds / 27.8 kg
47.2 pounds / 21.4 kg
With Stand
Without Stand
Power requirement
AC100-240V ~ 50/60Hz
Television System
NTSC-M, ATSC, 64 & 256 QAM
Program Coverage
VHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV 1-135
External Antenna Impedance
Operating Temperature Range
■
75 ohm
32 ~ 104°F (0 ~ 40°C)
Operating Humidity Range
Less than 80%
Storage Temperature Range
-4 ~ 140°F (-20 ~ 60°C)
Storage Humidity Range
APPENDIX
42LB5DC
(42LB5DC-UA)
42LB50C
(42LB50C-UA)
Less than 85%
The specifications shown above may be changed without prior notice for quality improvement.
83
APPENDIX
PROGRAMMING THE REMOTE CONTROL
The provided universal remote control can be programmed to operate most remote-controllable devices.
Note that the remote may not control all models of other brands.
Programming a code into a remote mode
To find out whether your remote control can operate each device without programming, turn on the device
(such as a VCR) and press the corresponding mode button on the remote.
After that, press the POWER button. If the device is turned off and it responds properly the remote control
need not be programmed. If not, the remote should be programmed to operate the device. The programming procedures are explained below.
Press the M E N U and M U T E button continuously at the same time for two seconds; the currently selected
device button is illuminated.
If you don't press any button for 20 seconds, the light on the mode button will be turned off. In that case,
you have to repeat from step 2.
Enter the appropriate code from the code table on the following pages. When pressing the button, the
light blinks at a time. If the device turned off, the programming is successful.
Press the M E N U button to store the code. After blinking twice, this code is stored.
Test the remote control functions to see if the device responds properly. If not, steps 2-5.
APPENDIX
Remote Control Code
DVD
Brand
Codes
APEX DIGITAL
022
DENON
020
GE
005
HARMAN KARDON
JVC
012
LG
001
MAGNAVOX
013
MARANTZ
024
84
014
006
027
010 016 025
Brand
Codes
Brand
Codes
MITSUBISHI
NAD
ONKYO
PANASONIC
PHILIPS
PIONEER
PROCEED
PROSCAN
002
023
008
003
013
004
021
005
RCA
SAMSUNG
SONY
THOMPSON
TOSHIBA
YAMAHA
ZENITH
005
011
007
005
019
009
010
017
009
026
006
006
015
006
008
018
016 025
VCR
Brand
AIWA
AKAI
Codes
Codes
Brand
MAGNAVOX
031 033 034 041
067 068
012 031 033 067
SAMSUNG
043 046 124
146
MARANTZ
069
033
023
037
031
103
039 043
129
033
MARTA
MATSUI
MEI
MEMOREX
040
033
007
108
116
135
041
010 064
110 111
117 119
MGA
MINOLTA
MITSUBISHI
101
027
031
003
033
101
045
013
013
049
151
034
024
012
048
043
053
066
133
023 039 043
053
017
031
037
131
008
025
034
046
138
009
033
109
136
012
018
063
033
033
013
066
063 072
144 147
031
050
150
034
048
012
106
027
035
101
153
010
045
026 034
137 150
015 033
101
033 043
055 060
152
039 043
MTC
MULTITECH
NEC
NORDMENDE
OPTONICA
PANASONIC
PENTAX
PHILCO
PHILIPS
PILOT
PIONEER
PORTLAND
PULSAR
QUARTZ
QUASAR
RCA
REALISTIC
013 020
114 123
009 013 014
034 101 106
RICO
RUNCO
SALORA
013
063
031
031
067
101
013
108
072
011
033
013
040
107
145
003
031
053
058
148
014
030
033
010
034
102
046
020
020
051
014 031
053 072
134 139
059
045 046
059 061
040
034
023 039 043
054
070 074 083
140 145
020 031 033
034 067
033 034 054
071 101
021 048
014
066
020
041
109
147
008
033
054
075
033
062
140
145
034
063
144
010 014
034 040
101
Codes
032
105
113
125
SANSUI
022
SANYO
003
102
SCOTT
017
131
SEARS
003
013
031
101
SHARP
031
SHINTOM
024
SONY
003
056
077
SOUNDESIGN
034
STS
013
SYLVANIA
031
067
SYMPHONIC
034
TANDY
010
TATUNG
039
TEAC
034
TECHNICS
031
TEKNIKA
019
101
THOMAS
034
TMK
006
TOSHIBA
008
059
TOTEVISION
040
UNITECH
040
VECTOR RESEARCH 012
VICTOR
048
VIDEO CONCEPTS 012
VIDEOSONIC
040
WARDS
003
031
053
YAMAHA
012
ZENITH
034
058
040 102 104
107 109 112
115 120 122
043 048 135
007 010 014
134
037 112 129
008 009 010
014 017 020
042 073 081
054 149
009 031 052
057 058 076
078 149
033 034 059
034
043
039 043
033 070
031 033 034
013 042 047
082 112 131
101
APPENDIX
034
016
125
AMPRO
072
ANAM
031
AUDIO DYNAMICS 012
BROKSONIC
035
CANON
028
CAPEHART
108
CRAIG
003
CURTIS MATHES 031
DAEWOO
005
065
112
DAYTRON
108
DBX
012
DYNATECH
034
ELECTROHOME 059
EMERSON
006
029
036
129
FISHER
003
FUNAI
034
GE
031
107
GO VIDEO
132
HARMAN KARDON
HITACHI
004
043
INSTANTREPLAY 031
JCL
031
JCPENNY
012
040
JENSEN
043
JVC
012
048
130
KENWOOD
014
047
LG (GOLDSTAR) 001
101
LLOYD
034
LXI
003
017
MAGIN
040
Brand
034 046
013
033
054
034
048
072
017
034
131
039
056
080
024
040
043
101
85
APPENDIX
SET ID
Use this function to specify a TV ID number.
SETUP
VIDEO
Press the M E N U button and then use D or E or
or
button to select the OPTION menu.
AUDIO
TIME
Aspect Ratio
Caption/Text
Caption Options
Language
OPTION
SCREEN
ISM Method
Low Power
LOCK
Press the G or
button and then use
or
button to select Set ID.
Set ID
or E or
Press the G or
button and then use D or E or
or
button to adjust Set ID to choose the
desired TV ID number. The adjustment range of Set ID
is 1~99.
SETUP
VIDEO
AUDIO
TIME
OPTION
APPENDIX
86
Press E X I T or R E T U R N button to return to TV viewing or press M E N U button to return to the previous
menu.
SCREEN
LOCK
Aspect Ratio
Caption/Text
Caption Options
Language
ISM Method
Low Power
Set ID
IR CODES
(Hexa)
Code
Function
Note
Code
0F
TV INPUT
Remote control Button (Some models) D6
0B
INPUT
Remote control Button
08
POWER
Remote control Button (Power On/Off)
98
MULTI
Remote control Button (Some models)
79
RATIO
Remote control Button
0E
TIMER
Remote control Button
10-19
Number Key 0-9
Remote control Button
4C
- (Dash)
Remote control Button
1A
FLASH BACK
Remote control Button
09
MUTE
Remote control Button
02
VOL +
Remote control Button
03
VOL -
Remote control Button
00
CH + ,
Remote control Button
01
CH - ,
Remote control Button
39
CC
Remote control Button
40
D ,
Remote control Button
41
Remote control Button
07
F ,
Remote control Button
06
G ,
Remote control Button
(Hexa)
C4
POWER ON
C5
POWER OFF
5A
D0
COMPONENT
D5
RGB-PC
CE
CC
77
Ratio 16:9
EXIT, RETURN
Remote control Button
0A
SAP
Remote control Button
PIP CH +
Remote control Button
61
PIP INPUT
Remote control Button
63
SWAP, PIP SWAP
Remote control Button
Discrete IR Code
Discrete IR Code
Discrete IR Code
(Only 16:9 Mode)
Ratio Zoom
Discrete IR Code
(Only Zoom1 Mode)
APPENDIX
71
Discrete IR Code
(Only 4:3 Mode)
5B
Remote control Button
HDMI2
Ratio 4:3
Remote control Button (Some models) AF
PIP CH -
HDMI1/DVI
76
EZ PIC
72
Discrete IR Code
(HDMI2 Input Selection)
4D
Remote control Button
Discrete IR Code
(HDMI1/DVI Input Selection)
Remote control Button (Some models)
Remote control Button
Discrete IR Code
(RGB-PC Input Selection)
EZ SOUND
INFO
Discrete IR Code
(Component Input Selection)
52
PIP
AV2
BF
Remote control Button
60
AV1
(AV2 Input Selection)
Remote control Button
AA
Discrete IR Code
(AV1 Input Selection)
ENTER
Remote control Button (Some models)
Discrete IR Code
(Only Power Off)
MENU
E0
Discrete IR Code
(Only Power On)
43
Remote control Button (Some models)
TV
Note
(TV Input Selection)
44
E1
Function
87
Regulatory Information cont.
FCC Compliance Statement
respecte toutes les exigences du Règlement sur le
matériel brouilleur du Canada.
This equipment has been tested and found to comply
within the limits of a Class B digital device pursuant to Part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation.
NOTICE
The regulations are applied only to the products with the
ID LABEL indicating specific requirements.
CE Conformity Notice (for Europe)
This equipment generates, uses, and can radiate radio
frequency energy and if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a particular
installation.
Products with the “CE” Marking comply with the EMC
Directive(89/336/EEC) and LOW VOLTAGE Directive
(73/23/EEC) issued by the Commission of the European
Community.
Compiance with these directives implies conformity to the
following European Norms :
• EN 55022
; Radio Frequency Interference
• EN 55024
; Electromagnetic Immunity
• EN 61000-3-2
; Power Line Harmonics
• EN 61000-3-3
; Voltage Fluctuations
• EN 60950-1
; Product Safety
If this equipment does cause harmful interference to radio
or television reception (which can be determined by
turning the equipment on and off), the user is encouraged
to try to correct the interference by using one or more of
the following measures:
NOTICE
The regulations are applied only to the products with the
ID LABEL indicating specific requirements.
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
the receiver.
Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV
technician for help.
Low Radiation Compliance (MPR II)
This monitor meets one of the strictest guidelines available
today for low radiation emissions, offering the user extra
shielding and an antistatic screen coating. These
guidelines, set forth by a government agency in Sweden,
limit the amount of emission allowed in the Extremely Low
Frequency (ELF) and Very Low Frequency (VLF)
electromagnetic range.
Caution: Changes or modifications not expressly approved
by the party responsible for compliance could void the
user's (or your) authority to operate the equipment. Only
peripherals (digital input/output devices, terminals, printers,
etc.) certified to comply with the Class B limits may be
attached to this monitor. Operation with non-certified
peripherals is likely to result in interference to radio and TV
reception. Only shielded signal cables may be used with
this System.
TCO'99 (TCO'99 applied model only)
NOTICE
The regulations are applied only to the products with the
ID LABEL indicating specific requirements.
Congratulations!
You have just purchased a TCO’99 approved and labelled
product! Your choice has provided you with a product
developed for professional use. Your purchase has also
contributed to reducing the burden on the environment and
also to the further development of environmentally
adapted electronics products.
Canadian DOC Notice
This Class B digital apparatus meets all requirements of
the Canadian Interference-Causing Equipment
Regulations. Cet appareil numérique de la classe B
01
Regulatory Information cont.
Why do we have environmentally labelled computers?
In many countries, environmental labelling has become an
established method for encouraging the adaptation of
goods and services to the environment. With the growing
manufacture and usage of electronic equipment
throughout the world, there is a recognized concern for the
materials and substances used by electronic products
with regards to their eventual recycling and disposal. By
proper selection of these materials and substances, the
impact on the environment can be minimized.
visual ergonomics.
Below you will find a brief summary of the ecological
requirements met by this product. The complete
ecological criteria document can be found at TCO
Development’s website http://www.tcodevelopment.com
or may be ordered from:
TCO Development
SE-114 94 STOCKHOLM, Sweden
Fax: +46 8 782 92 07
Email : development@tco.se
Information regarding TCO’99 approved and labelled
products may also be obtained at
http://www.tcodevelopment.com
There are also other characteristics of a computer, such as
energy consumption levels, that are important from the
viewpoints of both the work (internal) and natural (external)
environments. Electronic equipment in offices is often left
running continuously, resulting in unnecessary
consumption of large amounts of energy and additional
power generation. From the standpoint of carbon dioxide
emissions alone, it is vital to save energy.
Ecological requirements
Flame retardants
Flame retardants may be present in printed wiring board
laminates, cables, and housings. Their purpose is to
prevent, or at least to delay the spread of fire. Up to 30%
by weight of the plastic in a computer casing can consist of
flame retardant substances. Many flame retardants
contain bromine or chlorine, and these flame retardants
are chemically related to PCBs (polychlorinated
biphenyls). Both the flame retardants containing bromine
or chlorine and the PCBs are suspected of giving rise to
health effects, including reproductive damage in fisheating birds and mammals, due to the bio-accumulative*
processes when not disposed of in accordance with strict
standards for disposal.
What does labelling involve?
The product meets the requirements for the TCO’99
scheme which provides for international and environmental
labelling of personal computers and/or displays.
The labelling scheme was developed as a joint effort by the
TCO (The Swedish Confederation of Professional
Employees), Svenska Naturskyddsforeningen
(The Swedish Society for Nature Conservation) and
Statens Energimyndighet (The Swedish National
Energy Administration).
Approval requirements cover a wide range of issues:
ecology, ergonomics, emission of electrical and magnetical
fields, energy consumption and electrical safety.
TCO’99 requires that plastic components weighing more
than 25 grams shall not contain flame retardants with
organically bound bromine or chlorine. Flame retardants
are allowed in the printed wiring board laminates due to
the lack of commercially available alternatives.
Ecological criteria impose restrictions on the presence and
use of heavy metals, brominated and chlorinated flame
retardants, and other substances. The product must be
prepared for recycling and the manufacturing site(s) shall
be certified according to ISO14001 or EMAS registered.
Cadmium**
Cadmium is present in rechargeable batteries and in the
colour-generating layers of certain computer displays.
TCO’99 requires that batteries, the colour-generating
layers of display screens, and the electrical or electronics
components shall not contain any cadmium.
Energy requirements include a demand that the system
unit and/or display, after a certain period of inactivity,
shall reduce its power consumption to a lower level in one
or more stages. The length of time to reactivate the system
unit shall be reasonable for the user.
Mercury**
Mercury is sometimes found in batteries, relays and
switches. TCO’99 requires that batteries shall not contain
any mercury. It also demands that mercury is not present
in any of the electrical or electronics components
associated with the labelled unit. There is however one
Labelled products must meet strict environmental
demands, for example, in respect of the reduction of
electrical and magnetical fields as well as work load and
02
Regulatory Information cont.
•
exception. Mercury is, for the time being, permitted in the
back light system of flat panel monitors as there today is
no commercially available alternative. TCO aims on
removing this exception when a mercury free alternative is
available.
Noise emissions
Ecology
• The product must be prepared for recycling and the
manufacturer must have a certified environmental
management system such as EMAS or ISO 14 001
• Restrictions on
chlorinated and brominated flame retardants and
polymers
heavy metals such as cadmium, mercury and lead.
Lead**
Lead can be found in picture tubes, display screens,
solders and capacitors. TCO’99 permits the use of lead
due to the lack of commercially available alternatives, but
in future requirements TCO Development aims at
restricting the use of lead.
_____________________________________________
The requirements included in this label have been
developed by TCO Development in co-operation with
scientists, experts, users as well as manufacturers all over
the world. Since the end of the 1980s TCO has been
involved in influencing the development of IT equipment in
a more user-friendly direction. Our labelling system started
with displays in 1992 and is now requested by users and
IT-manufacturers all over the world.
* Bio-accumulative is defined as substances which
accumulate in living organisms.
**Lead, Cadmium and Mercury are heavy metals
which are bio-accumulative.
TCO’03 (TCO’03 applied model only)
For more information, please visit
www.tcodevelopment.com
English
Congratulations!
The display you have just purchased carries the TCO’03
Displays label.
This means that your display is designed,manufactured
and tested according to some of the strictest quality and
environmental requirements in the world. This makes for a
high performance product, designed with the user in focus
that also minimizes the impact on our natural environment.
Some of the features of the TCO’03 Display requirements:
Information for Environmental Preservation
LGE. announced the 'LG Declaration for a Cleaner
Environment' in 1994, and this ideal has served as a
guiding managerial principle ever since. The Declaration is
a foundation that has allowed us to undertake
environmentally friendly activities in careful consideration
of economic, environmental, and social aspects.
We promote activities for environmental preservation, and
we specifically develop our products to embrace the
concept of environment-friendly.
We minimize the hazardous materials contained in our
products. For example, there is no cadmium to be found in
our monitors.
Ergonomics
• Good visual ergonomics and image quality in order to
improve the working environment for the user and to
reduce sight and strain problems. Important
parameters are luminance, contrast, resolution,
reflectance, colour rendition and image stability.
Information for recycling
This monitor may contain parts which could be hazardous
to the environment. It is important that this monitor be
recycled after use.
Energy
• Energy-saving mode after a certain time – beneficial
both for the user and the environment
• Electrical safety
LGE. handles all waste monitors through an
environmentally acceptable recycling method. There are
several take-back and recycling systems currently in
Emissions
• Electromagnetic fields
03
Regulatory Information cont.
operation worldwide. Many parts will be reused and
recycled, while harmful substances and heavy metals are
treated by an environmentally friendly method.
If you want to find out more information about our
recycling program, please contact your local LG vendor or
a corporate representative of LG.
Wir richten unsere Firmenpolitik auf eine sauberere
Umwelt hin aus, indem wir umweltspezifische Aspekte als
wichtigen Punkt in die Weiterentwicklung unseres
Unternehmens einfließen lassen. Zusätzliche
Informationen über unsere ‘grüne’ Firmenpolitik erhalten
Sie auf unserer Website.
http://www.lge.com/about/environment/html/Recycling.jsp
We set our vision and policies on a cleaner world by
selecting the issue of the global environment as a task for
corporate improvement. Please visit our website for more
information about our ‘green’ policies.
http://www.lge.com/about/environment/html/Recycling.jsp
Français
Information sur la protection del’environnement
LGE. a publié sa 'Déclaration en faveur d’un
environnement plus propre' en 1994 et celle-ci est restée,
depuis lors, un principe directeur de notre entreprise.
Cette déclaration a servi de base à notre réflexion et nous
a permis de prendre en compte à la fois les aspects
économiques et sociaux de nos activités, tout en
respectant l’environnement.
Deutsch
Informationen zur Erhaltung der Umwelt
Im Jahr 1994 verkündete LGE die 'LG Declaration for a
Cleaner Environment' (LG Erklärung für eine sauberere
Umwelt). Seitdem dient dieses Ideal als führendes Prinzip
des Unternehmens. Diese Erklärung war die Basis für die
Durchführung von
umweltfreundlichen Aktivitäten, wobei wirtschaftliche,
umweltbezogene und soziale Aspekte in die
Überlegungen mit einbezogen wurden.
Wir fördern Aktivitäten zum Schutz der Umwelt und die
Entwicklung unserer Produkte ist darauf ausgerichtet,
unserem Konzept bezüglich Umweltfreundlichkeit gerecht
zu werden.
Wir sind darauf bedacht, den Anteil der in unseren
Produkten enthaltenen schädlichen Materialien zu
minimieren. So ist in unseren Monitoren beispielsweise
kein Kadmium zu finden.
Nous encourageons les activités en faveur de la
préservation de l’environnement et c’est dans cet esprit
que nous développons nos produits : nous réduisons au
minimum les matières dangereuses qui entrent dans leur
composition et l’on ne trouve pas de cadmium, par
exemple, dans nos moniteurs.
Information sur le recyclage
Ce moniteur peut contenir des composants qui présentent
un risque pour l’environnement. Il est donc important que
celui-ci soit recyclé après usage.
LGE. traite les moniteurs en fin de cycle conformément à
une méthode de recyclage respectueuse de
l’environnement. Nous reprenons nos produits et les
recyclons dans plusieurs sites répartis dans le monde
entier. De nombreux composants sont réutilisés et
recyclés, et les matières dangereuses, ainsi que les
métaux lourds, sont traités selon un procédé écologique.
Si vous souhaitez plus de renseignements sur notre
programme de recyclage, veuillez contacter votre
revendeur LG ou un l’un de nos représentants.
Informationen zum Thema Recycling
Dieser Monitor enthält Teile, die umweltschädlich sein
können. Es ist unbedingt erforderlich, dass der Monitor
recycelt wird, nachdem er außer Dienst gestellt wurde.
Bei LGE. werden alle ausrangierten Monitore in einem
unter umweltbezogenen Aspekten geeigneten Verfahren
recycelt. Augenblicklich sind weltweit mehrere
Rücknahme- und Recyclingsysteme im Einsatz. Viele
Teile werden wieder verwendet und recycelt. Schädliche
Substanzen und Schwermetalle werden durch
umweltverträgliche Verfahren behandelt.
Falls Sie mehr über unser Recyclingprogramm erfahren
möchten, wenden Sie sich bitte an Ihren lokalen LGHändler oder einen Unternehmensvertreter von LG.
Nous voulons agir pour un monde plus propre et croyons
au rôle de notre entreprise dans l’amélioration de
l’environnement. Pour plus de renseignements sur notre
politique “verte”, rendez visite à notre site :
http://www.lge.com/about/environment/html/Recycling.jsp
04
Regulatory Information cont.
Italiano
respetan el medio ambiente siempre teniendo en cuenta
aspectos sociales,
económicos y medioambientales.
Informazioni per la tutela dell’ambiente
La LGE. ha annunciato nel 1994 la cosiddetta 'LG
Declaration for a Cleaner Environment' (Dichiarazione di
LG a favore di un ambiente più pulito), un ideale che da
allora funge da principio ispiratore della gestione
aziendale. La dichiarazione rappresenta il fondamento che
consente di intraprendere attività a favore dell'ambiente
tenendo conto degli aspetti economici, ambientali e
sociali.Noi della LG, promuoviamo attività a favore della
tutela dell'ambiente sviluppando appositamente i nostri
prodotti per cogliere il concetto del rispetto dell’ambiente
riducendo i materiali dannosi presenti nei nostri prodotti.
Ad esempio nei nostri monitor non è presente il cadmio.
Promocionamos actividades orientadas a la conservación
del medio ambiente y desarrollamos nuestros productos
específicamente para que se ajusten a la filosofía que
protege el entorno.
Reducimos al máximo el uso de materiales de riesgo en
nuestros productos. Un ejemplo de ello es la ausencia
total de cadmio en nuestros monitores.
Información para el reciclaje
Este monitor puede contener piezas que entrañen riesgos
medioambientales. Es importante reciclar este monitor
después de su utilización.
LGE. trata todos los monitores usados siguiendo un
método de reciclaje que no daña al entorno. Contamos
con diversos sistemas de recuperación y reciclaje que
funcionan a nivel mundial en la actualidad. Es posible
reciclar y reutilizar muchas de las piezas, mientras que las
sustancias dañinas y los metales pesados se tratan
siguiendo un método que no perjudique al medio
ambiente. Si desea obtener más información acerca del
programa de reciclaje, póngase en contacto con su
proveedor local de LG o con un representante empresarial
de nuestra marca.
Informazioni per il riciclaggio
Il monitor può presentare componenti che potrebbero
risultare eventualmente dannosi per l'ambiente. È
importante che il monitor sia riciclato al termine del suo
utilizzo.
La LGE. gestisce tutti i monitor di rifiuto con un metodo di
riciclaggio soddisfacente dal punto di vista ambientale. In
tutto il mondo sono attualmente in funzione numerosi
sistemi di riciclaggio e recupero. I diversi componenti sono
riutilizzati e riciclati, mentre le sostanze dannose e i metalli
pesanti vengono trattati con un metodo rispettoso
dell’ambiente.
Se si desiderano maggiori informazioni in merito al
programma di riciclaggio, è consigliabile rivolgersi al
proprio rivenditore LG o ad un rappresentante aziendale
della LG.
Basamos nuestra visión y nuestras políticas en un mundo
más limpio y para ellos optamos por un entorno global
como tarea principal de nuestra evolución como empresa.
Visite nuestra página Web para obtener más información
sobre nuestras políticas ecológicas.
http://www.lge.com/about/environment/html/Recycling.jsp
Noi della LG impostiamo la nostra visione e le nostre
politiche a favore di un mondo più pulito ponendo la
questione dell'ambiente dal punto di vista globale come
una mansione rivolta al miglioramento della nostra
azienda. Vi invitiamo a visitare il nostro sito internet per
ulteriori informazioni sulla nostra politica “verde”.
http://www.lge.com/about/environment/html/Recycling.jsp
Português
Informações relacionadas à preservação
ambiental
A LGE. anunciou a 'LG Declaration for a Cleaner
Environment' (Declaração da LG para um ambiente mais
limpo) em 1994 e esse ideal tem servido desde então
como um princípio administrativo de orientação. A
Declaração é a base que nos tem permitido realizar
atividades favoráveis ao ambiente com consideração
atenta aos aspectos econômicos, ambientais e sociais.
Espanõl
Información para la conservación
medioambiental
LGE. presentó la 'Declaración para un entorno más limpio
de LG' en 1994 y este ideal ha servido para guiar nuestros
principios empresariales desde entonces. La Declaración
es la base que nos ha permitido llevar a cabo tareas que
Promovemos atividades de preservação ambiental e
desenvolvemos nossos produtos para englobar
05
Regulatory Information cont.
especificamente o conceito de favorável ao ambiente.
Reduzimos os materiais perigosos contidos em nossos
produtos. Por exemplo, não há cádmio em nossos
monitores.
Informatie met betrekking tot recycling
Deze monitor bevat materialen die schadelijk zouden
kunnen zijn voor het milieu. Het is belangrijk dat deze
monitor aan het einde van zijn levensduur wordt
gerecycled.
Informações relacionadas à reciclagem
Este monitor pode conter peças que podem representar
riscos ao ambiente. É importante que ele seja reciclado
após o uso.
LGE. verwerkt alle afvalmonitors via een milieuvriendelijke
recyclingmethode. Hiervoor worden er momenteel
wereldwijd verscheidene inname- en recyclingsystemen
gehanteerd. Een groot aantal onderdelen wordt opnieuw
gebruikt en gerecycled, waarbij schadelijke stoffen en
zware metalen volgens een milieuvriendelijke methode
worden verwerkt.
Voor meer informatie over ons recyclingprogramma kunt u
contact opnemen met uw plaatselijke LGvertegenwoordiger of een LG-vestiging.
A LGE. cuida de todos os monitores descartados através
de um método de reciclagem agradável ao ambiente. Há
vários sistemas de devolução e reciclagem atualmente
em operação no mundo. Muitas peças serão reutilizadas
e recicladas e as substâncias nocivas e os metais
pesados passarão por tratamento através de um método
favorável ao ambiente.
Para obter mais informações sobre nosso programa de
reciclagem, entre em contato com seu fornecedor LG
local ou com um representante corporativo da LG.
Definimos nossa visão e nossas políticas relacionadas a
um mundo mais limpo selecionando a questão do
ambiente global como uma tarefa de aprimoramento
corporativo. Visite nosso site para obter mais informações
sobre nossas políticas de meio ambiente.
http://www.lge.com/about/environment/html/Recycling.jsp
Onze visie en ons beleid met betrekking tot een schonere
wereld vloeien voort uit het feit dat wij het milieu hebben
aangemerkt als een onderwerp dat speciale aandacht
verdient binnen onze onderneming. Bezoek onze website
voor meer informatie over ons 'groene' beleid.
http://www.lge.com/about/environment/html/Recycling.jsp
Russian
»ÌÙÓχˆËˇ ÔÓ Óı‡Ì ÓÍÛʇ˛˘ÂÈ Ò‰˚
Nederlands
¬ 1994 „Ó‰Û ÍÓÔÓ‡ˆËˇ LGE ÓÔÛ·ÎËÍÓ‚‡Î‡
'ƒÂÍ·‡ˆË˛ LG ÔÓ Óı‡Ì ÓÍÛʇ˛˘ÂÈ Ò‰˚',
ÍÓÚÓ‡ˇ Ò ÚÂı ÔÓ ÒÎÛÊËÚ ÓÒÌÓ‚Ì˚Ï ÔË̈ËÔÓÏ
ÛÔ‡‚ÎÂÌˡ. Õ‡ ÓÒÌÓ‚Â ˝ÚÓÈ ‰ÂÍ·‡ˆËË Ï˚ ÒÏÓ„ÎË
Ô‰ÔËÌˇÚ¸ ‰ÂÈÒڂˡ, Ó·ÂÒÔ˜˂‡˛˘ËÂ
·ÂÁÓÔ‡ÒÌÓÒÚ¸ ÓÍÛʇ˛˘ÂÈ Ò‰˚, Û‰ÂΡˇ ÔË ˝ÚÓÏ
‰ÓÎÊÌÓ ‚ÌËχÌË ˝ÍÓÌÓÏ˘ÂÒÍËÏ, ˝ÍÓÎӄ˘ÂÒÍËÏ Ë
ÒӈˇθÌ˚Ï ‡ÒÔÂÍÚ‡Ï.
Informatie met betrekking tot het behoud van
het milieu
LGE. publiceerde in 1994 de 'LG Declaration for a Cleaner
Environment' (de LG-verklaring met betrekking tot een
schoner milieu). Deze verklaring en het ideaal van een
schoner milieu fungeren sindsdien als een bestuurlijke
leidraad voor onze onderneming. Op basis van deze
verklaring ontplooien wij milieuvriendelijke activiteiten,
waarbij er zowel met sociale en economische aspecten,
als met milieuaspecten zorgvuldig rekening wordt
gehouden.
Ã˚ ÒÚËÏÛÎËÛÂÏ ‰ÂˇÚÂθÌÓÒÚ¸ ÔÓ Óı‡ÌÂ
ÓÍÛʇ˛˘ÂÈ Ò‰˚, Û‰ÂΡˇ ÓÒÓ·Ó ‚ÌËχÌËÂ
‡Á‡·ÓÚÍ ̇¯ÂÈ ÔÓ‰Û͈ËË ‚ ÒÓÓÚ‚ÂÚÒÚ‚ËË Ò
ÍÓ̈ÂÔˆËÂÈ ˝ÍÓÎӄ˘ÂÒÍÓÈ ·ÂÁÓÔ‡ÒÌÓÒÚË.
Ã˚ Ò‚Ó‰ËÏ Í ÏËÌËÏÛÏÛ ÒÓ‰ÂʇÌË ÓÔ‡ÒÌ˚ı
‚¢ÂÒÚ‚ ‚ ̇¯ÂÈ ÔÓ‰Û͈ËË. Õ‡ÔËÏÂ, ‚ ̇¯Ëı
ÏÓÌËÚÓ‡ı ‚˚ Ì ̇ȉÂÚ ͇‰Ïˡ.
Wij ondersteunen activiteiten die zijn gericht op het
behoud van het milieu en wij houden bij het ontwikkelen
onze producten specifiek rekening met de
milieuvriendelijkheid van onze producten.
Wij minimaliseren het gebruik van schadelijke stoffen in
onze producten. Er wordt bijvoorbeeld geen cadmium
verwerkt in onze monitors.
»ÌÙÓχˆËˇ ÔÓ ÛÚËÎËÁ‡ˆËË ÓÚıÓ‰Ó‚
›ÚÓÚ ÏÓÌËÚÓ ÏÓÊÂÚ ÒÓ‰Âʇڸ ÍÓÏÔÓÌÂÌÚ˚,
ÍÓÚÓ˚ ÏÓ„ÛÚ Ì‡ÌÂÒÚË Û˘Â· ÓÍÛʇ˛˘ÂÈ Ò‰Â.
06
Regulatory Information cont.
ÕÂÓ·ıÓ‰ËÏÓ ÛÚËÎËÁËÓ‚‡Ú¸ ÏÓÌËÚÓ ÔÓÒÎÂ
ËÒÔÓθÁÓ‚‡Ìˡ.
KÓÔÓ‡ˆËˇ LGE ÔÂÂ‡·‡Ú˚‚‡ÂÚ ‚Ò ·‡ÍÓ‚‡ÌÌ˚Â
ÏÓÌËÚÓ˚ Ò ÔÓÏÓ˘¸˛ ˝ÍÓÎӄ˘ÂÒÍË ÔËÂÏÎÂÏÓ„Ó
ÏÂÚÓ‰‡ ÛÚËÎËÁ‡ˆËË ÓÚıÓ‰Ó‚. œÓ ‚ÒÂÏÛ ÏËÛ
‰ÂÈÒÚ‚Û˛Ú ÒËÒÚÂÏ˚ ÛÚËÎËÁ‡ˆËË ÓÚıÓ‰Ó‚ Ë ‚ÓÁ‚‡Ú‡
ËÒÔÓθÁÓ‚‡ÌÌÓÈ ÔÓ‰Û͈ËË. ÃÌÓ„Ë ÍÓÏÔÓÌÂÌÚ˚
·Û‰ÛÚ ‚ÚÓ˘ÌÓ ËÒÔÓθÁÓ‚‡Ì˚ Ë ÛÚËÎËÁËÓ‚‡Ì˚, ‚ ÚÓ
‚ÂÏˇ Í‡Í ‚‰Ì˚ ‚¢ÂÒÚ‚‡ Ë ÚˇÊÂÎ˚ ÏÂÚ‡ÎÎ˚
·Û‰ÛÚ Ó·‡·ÓÚ‡Ì˚ Ò ÔÓÏÓ˘¸˛ ˝ÍÓÎӄ˘ÂÒÍË
ÔËÂÏÎÂÏÓ„Ó ÏÂÚÓ‰‡.
«‡ ·ÓΠÔÓ‰Ó·ÌÓÈ ËÌÙÓχˆËÂÈ ÔÓ Ì‡¯ÂÈ
ÔÓ„‡ÏÏ ÛÚËÎËÁ‡ˆËË ÓÚıÓ‰Ó‚ Ó·‡˘‡ÈÚÂÒ¸ Í
ÏÂÒÚÌÓÏÛ ÔÓÒÚ‡‚˘ËÍÛ ËÎË Ô‰ÒÚ‡‚ËÚÂβ
ÍÓÔÓ‡ˆËË LG.
Ã˚ ÓËÂÌÚËÛÂÏÒˇ ̇ Ó·ÂÒÔ˜ÂÌË ˝ÍÓÎӄ˘ÂÒÍÓÈ
·ÂÁÓÔ‡ÒÌÓÒÚË, ÒÚ‡‚ˇ Ò· ˆÂθ˛ „ÎÓ·‡Î¸ÌÛ˛ Á‡˘ËÚÛ
ÓÍÛʇ˛˘ÂÈ Ò‰˚. ƒÓÔÓÎÌËÚÂθÌÛ˛ ËÌÙÓχˆË˛
Ó Ì‡¯ÂÈ ÔÓÎËÚËÍ ÔÓ Óı‡Ì ÓÍÛʇ˛˘ÂÈ Ò‰˚ ‚˚
ÏÓÊÂÚ ̇ÈÚË Ì‡ ̇¯ÂÏ Ò‡ÈÚÂ:
http://www.lge.com/about/environment/html/Recycling.jsp
EPA (EPA applied model only)
ENERGY STAR is a set of power-saving guidelines
issued by the U.S. Environmental Protection
Agency(EPA).
As an ENERGY STAR Partner LGE U. S.
A.,Inc. has determined that this product
meets the ENERGY STAR guidelines for
energy efficiency.
NOM MARK (Mexico only)
07
Regulatory Information cont.
WEEE
un bidone della spazzatura barrato da una croce
significa che il prodotto è coperto dalla direttiva
europea 2002/96/EC.
2.Tutti i prodotti elettrici ed elettronici dovrebbero
essere smaltiti separatamente rispetto alla
raccolta differenziata municipale, mediante
impianti di raccolta specifici designati dal
governo o dalle autorità locali.
3.Il corretto smaltimento delle apparecchiature
obsolete contribuisce a prevenire possibili
conseguenze negative sulla salute umana e
sull'ambiente.
4.Per informazioni più dettagliate sullo smaltimento
delle apparecchiature obsolete, contattare il
comune, il servizio di smaltimento rifiuti o il
negozio in cui è stato acquistato il prodotto.
(for Europe )
English
Disposal of your old appliance
1.When this crossed-out wheeled bin symbol is attached
to a product it means the product is covered by the
European Directive 2002/96/EC.
2.All electrical and electronic products should be
disposed of separately from the municipal waste
stream via designated collection facilities appointed by
the government or the local authorities.
3.The correct disposal of your old appliance will help
prevent potential negative consequences for the
environment and human health.
4.For more detailed information about disposal of your
old appliance, please contact your city office, waste
disposal service or the shop where you purchased the
product.
Swedish
Kassering av din gamla apparat
1.När den här symbolen med en överkryssad
soptunna på hjul sitter på en produkt innebär det
att den regleras av European Directive
2002/96/EC.
2.Alla elektriska och elektroniska produkter bör
kasseras via andra vägar än de som finns för
hushållsavfall, helst via för ändamålet avsedda
uppsamlingsanläggningar som myndigheterna
utser.
3.Om du kasserar din gamla apparat på rätt sätt
så bidrar du till att förhindra negativa
konsekvenser för miljön och människors hälsa.
4.Mer detaljerad information om kassering av din
gamla apparat kan får av kommunen,
renhållningsverket eller den butik där du köpte
produkten.
French
Élimination de votre ancien appareil
1.Ce symbole, représentant une poubelle sur
roulettes barrée d'une croix, signifie que le
produit est couvert par la directive européenne
2002/96/EC.
2.Les éléments électriques et électroniques
doivent être jetés séparément, dans les videordures prévus à cet effet par votre municipalité.
3.Une élimination conforme aux instructions aidera
à réduire les conséquences négatives et risques
éventuels pour l'environnement et la santé
humaine.
4.Pour plus d'information concernant l'élimination
de votre ancien appareil, veuillez contacter votre
mairie, le service des ordures ménagères ou
encore la magasin où vous avez acheté ce
produit.
Dutch
Uw oude toestel wegdoen
1.Als het symbool met de doorgekruiste verrijdbare
afvalbak op een product staat, betekent dit dat
het product valt onder de Europese Richtlijn
2002/96/EC.
2.Elektrische en elektronische producten mogen
niet worden meegegeven met het huishoudelijk
afval, maar moeten worden ingeleverd bij
speciale inzamelingspunten die door de lokale of
landelijke overheid zijn aangewezen.
3.De correcte verwijdering van uw oude toestel
helpt negatieve gevolgen voor het milieu en de
menselijke gezondheid voorkomen.
Italian
Smaltimento delle apparecchiature obsolete
1.Quando su un prodotto è riportato il simbolo di
08
Regulatory Information cont.
4.Wilt u meer informatie over de verwijdering van
uw oude toestel? Neem dan contact op met uw
gemeente, de afvalophaaldienst of de winkel
waar u het product hebt gekocht.
eller de lokale myndigheder.
3.Korrekt bortskaffelse af dit gamle apparat er med
til at forhindre mulige skadevirkninger på miljøet
og menneskelig sundhed.
4.Mere detaljerede oplysninger om bortskaffelse af
dit gamle apparat kan fås ved at kontakte dit
lokale kommunekontor, renovationsselskab eller
den butik, hvor du købte produktet.
Finnish
Vanhojen laitteiden hävittäminen
1.Tämä merkki tuotteessa tarkoittaa, että tuote
kuuluu sähkö- ja elektroniikkalaiteromusta
annetun EU-direktiivin 2002/96/EY
soveltamisalaan.
2.Kaikki elektroniset laitteet ovat ongelmajätettä,
joten ne on toimitettava paikalliseen
keräyspisteeseen.
3.Vanhan laitteen asianmukainen hävittäminen
ehkäisee mahdollisia ympäristöön ja
terveyteen kohdistuvia haittavaikutuksia.
4.Lisätietoa vanhan laitteen hävittämisestä saat
ottamalla yhteyden paikallisiin viranomaisiin,
kierrätyskeskukseen tai myymälään, josta ostit
laitteen.
Greek
∞fiÚÚÈ„Ë Ù˘ ·ÏÈ¿˜ Û·˜ Û˘Û΢‹˜
1.ŸÙ·Ó ¤Ó· ÚÔ˚fiÓ ‰È·ı¤ÙÂÈ ÙÔ ‰‡Ì‚ÔÏÔ ÂÓfi˜
‰È·ÁÚ·Ì̤ÓÔ˘ οϷıÔ˘ ·ÔÚÚÈÌÌ¿ÙˆÓ, ÙfiÙ ÙÔ ÚÔ˚fiÓ
ηχÙÂÙ·È ·fi ÙËÓ E˘Úˆ·˚΋ O‰ËÁ›· 2002/96/EOK.
2.H ·fiÚÚÈ„Ë fiÏˆÓ ÙˆÓ ËÏÂÎÙÚÈÎÒÓ Î·È ËÏÂÎÙÚÔÓÈÎÒÓ
ÚÔ˚fiÓÙˆÓ Ú¤ÂÈ Ó· Á›ÓÂÙ·È ¯ˆÚÈÛÙ¿ ·fi Ù· ÁÂÓÈο
ÔÈÎȷο ·ÔÚÚ›ÌÌ·Ù· ̤ۈ ηıÔÚÈṲ̂ӈÓ
ÂÁηٷÛÙ¿ÛÂˆÓ Û˘ÏÏÔÁ‹˜ ·ÔÚÚÈÌÌ¿ÙˆÓ, ÔÈ Ôԛ˜
¤¯Ô˘Ó ‰ËÌÈÔ˘ÚÁËı› ›Ù ·fi ÙËÓ Î˘‚¤ÚÓËÛË ‹ ·fi ÙȘ
ÙÔÈΤ˜ ·Ú¯¤˜.
3.H ÛˆÛÙ‹ ·fiÚÚÈ„Ë Ù˘ ·ÏÈ¿˜ Û·˜ Û˘Û΢‹˜ ı·
‚ÔËı‹ÛÂÈ ÛÙËÓ ·ÔÙÚÔ‹ Èı·ÓÒÓ ·ÚÓËÙÈÎÒÓ Û˘ÓÂÈÒÓ
ˆ˜ ÚÔ˜ ÙÔ ÂÚÈ‚¿ÏÏÔÓ Î·È ÙËÓ ˘Á›· ÙÔ˘ ·ÓıÚÒÔ˘.
4.°È· ÈÔ ÏÂÙÔÌÂÚ›˜ ÏËÚÔÊÔڛ˜ Û¯ÂÙÈο Ì ÙËÓ
·fiÚÚÈ„Ë Ù˘ ·ÏÈ¿˜ Û·˜ Û˘Û΢‹˜, ÂÈÎÔÈÓˆÓ‹ÛÙ ÌÂ
ÙÔ ·ÚÌfi‰›Ô ÙÔÈÎfi ÁÚ·Ê›Ô, ˘ËÚÂÛ›· ‰È¿ıÂÛ˘ ÔÈÎÈ·ÎÒÓ
·ÔÚÚÈÌÌ¿ÙˆÓ ‹ ÙÔ Ì·Á·Í› ·fi ÙÔ ÔÔ›Ô ·ÁÔÚ¿Û·ÙÂ ÙÔ
ÚÔ˚fiÓ.
German
Entsorgung von Altgeräten
1.Wenn dieses Symbol eines durchgestrichenen
Abfalleimers auf einem Produkt angebracht ist,
unterliegt dieses Produkt der europäischen
Richtlinie 2002/96/EC.
2.Alle Elektro- und Elektronik-Altgeräte müssen
getrennt vom Hausmüll über dafür staatlich
vorgesehenen Stellen entsorgt werden.
3.Mit der ordnungsgemäßen Entsorgung des alten
Geräts vermeiden Sie Umweltschäden und eine
Gefährdung der persönlichen Gesundheit.
4.Weitere Informationen zur Entsorgung des alten
Geräts erhalten Sie bei der Stadtverwaltung,
beim Entsorgungsamt oder in dem Geschäft, wo
Sie das Produkt erworben haben.
Spanish
Cómo deshacerse de aparatos eléctricos y
electrónicos viejos
1.Si en un producto aparece el símbolo de un contenedor
de basura tachado, significa que éste se acoge a la
Directiva 2002/96/CE.
2.Todos los aparatos eléctricos o electrónicos se deben
desechar de forma distinta del servicio municipal de
recogida de basura, a través de puntos de recogida
designados por el gobierno o las autoridades locales.
3.La correcta recogida y tratamiento de los dispositivos
inservibles contribuye a evitar riesgos potenciales para el
medio ambiente y la salud pública.
4.Para obtener más información sobre cómo deshacerse de
sus aparatos eléctricos y electrónicos viejos, póngase en
contacto con su ayuntamiento, el servicio de recogida de
basuras o el establecimiento donde adquirió el producto.
Danish
Sådan smider du dit gamle apparat ud
1.Når der er et tegn med et kryds over en
skraldespand, betyder det, at produktet er
omfattet af EU-direktiv 2002/96/EC.
2.Alle elektriske og elektroniske produkter skal
smides ud et andet sted end gennem den
kommunale affaldsordning ved hjælp af specielle
indsamlingsfaciliteter, der er organiseret af staten
09
Regulatory Information cont.
Portuguese
Hungarian
Slovak
Polish
Czech
Croatian
10
Regulatory Information cont.
Estonian
Latvian
Lithuanian
11

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : 3.1-702
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Create Date                     : 2009:01:14 17:04:36+09:00
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2009:01:14 17:05:14+09:00
Metadata Date                   : 2009:01:14 17:05:14+09:00
Format                          : application/pdf
Title                           : Microsoft Word - User_s Manual_H_ok.doc
Creator                         : EMC CENTER
Document ID                     : uuid:ed4bf55e-81f6-4cb8-8ebb-df13c6a4a8b0
Instance ID                     : uuid:12e49be5-8d81-48f0-a187-58bdbccc740e
Has XFA                         : No
Page Count                      : 53
Author                          : EMC CENTER

EXIF Metadata provided by EXIF.tools