LG Electronics USA 42LG70UG LCD TV/MONITOR User Manual SAC30708020 Edit1 en 6

LG Electronics USA LCD TV/MONITOR SAC30708020 Edit1 en 6

Contents

User manual 2 of 2

WATCHING TV / CHANNEL CONTROL51QUICK MENUDisplay each menu.Make appropriate adjustments.■AAssppeecctt  RRaattiioo: Selects your desired picture format. ■PPoowweerr  SSaavviinngg  (Plasma TV Only): Adjusts screenbrightness to reduce the power consumption of theTV.■BBaacckklliigghhtt  (LCD TV  Only): Adjust the brightnessof LCD panel to control the brightness of the screen.■CClleeaarr  VVooiiccee: By differentiating the human soundrange  from  others,  it  helps  make  human  voicessound better.■PPiiccttuurree  MMooddee: Selects the factory preset picturedepend on the viewing environment.■SSoouunndd  MMooddee: Selects the factory preset sound fortype of program.■CCaappttiioonn: Select on or off.■MMuullttii  AAuuddiioo: Changes the audio language (Digitalsignal).SSAAPP: Selects MTS sound (Analog signal).■SSlleeeepp  TTiimmeerr:  Select  the  amount  of  time  beforeyour TV turns off automatically.■DDeell//AAdddd//FFaavv: Select channel you want to add/deleteor add the channel to the Favorite List.■UUSSBB  EEjjeecctt:  Select  “USB  Eject”  in  order  to  ejectUSB device.Your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual.Q.Menu (Quick Menu) is a menu of features which users might use frequently.1Q. MENU2LCD TVQ.Menu3FF16:9     GGVividOffStandardOffEnglishOffAddEjectAspect RatioBacklightClear VoicePicture ModeSound ModeCaptionMulti AudioSleep TimerDel/Add/FavUSB EjectCHPlasma TVQ.MenuClose Close3FF16:9     GGVividOffStandardOffEnglishOffAddEjectAspect RatioPower SavingClear VoicePicture ModeSound ModeCaptionMulti AudioSleep TimerDel/Add/FavUSB EjectCH3Q. MENUReturn to TV viewing.Except 32/37/42LG30
WATCHING TV / CHANNEL CONTROL52INITIAL SETTINGWATCHING TV / CHANNEL CONTROLThis Function guides the user to easily set the essential items for viewing the TV for the first time when pur-chasing the TV. If will be displayed on the screen when turning the TV on for the first time. It can also be acti-vated from the user menus.Select HHoommeeMode.12ENTERSelect AAuuttooor MMaannuuaall.Select desired time option.13ENTER2YearCurrent Time Setting2007Month 11Date 15Hour 5 PMMinute 52Time Zone EasternDaylight SavingOffFF            Auto GGExitEnterRETURNStep2. Time SettingSelecting the environment.Choose the setting mode you want.In StoreHomeExitEnterRETURNStep1. Mode SettingStep1. Mode settingStep2. Time setting■Default selection is “HHoommee”. We recommend setting the TV to “HHoommee” mode for the best picture in yourhome environment.■“IInn--ssttoorree” Mode is only intended for use in retail environments. Customers can adjust the “PPiiccttuurreemenu -PPiiccttuurree  mmooddee” manually while inspecting the  TV, but the TV will automatically return to  preset  in-storemode after 5 minutes.■“IInn--ssttoorree” Mode is an optimal setting for displaying at stores. “In-Store” mode initializes the TV to set theimage  quality  and  operates  “TTrruuMMoottiioonn  DDeemmoo(For  37/42/47/52LG60,  42/47/52LG70,  42LGX)”  or“LLooccaall  DDiimmmmiinngg  DDeemmoo(For 47LG90)” after a certain period of time.!
WATCHING TV / CHANNEL CONTROL53Select OOSSDD  LLaanngguuaaggee  SSeettttiinnggorAAuuddiioo  LLaanngguuaaggee  SSeettttiinngg.Start AAuuttoo  TTuunniinngg.Select your desired language.13ENTER1ENTER2Auto Tuning can change channel map.Do you want to start Auto Tuning?EnterExitEnterRETURNStep4. Auto TuningExitEnterRETURNStep3. Option Setting1. OSD Language SettingFFEnglish GG2. Audio Language Setting FrenchStep3. Option settingStep4. Auto Tuning■ You can also adjust IInniittiiaall  SSeettttiinnggin the OOPPTTIIOONN  menu.NOTE!
WATCHING TV / CHANNEL CONTROL54ON-SCREEN MENUS SELECTIONWATCHING TV / CHANNEL CONTROLYour TV's OSD (On Screen Display) may differ slightly from that shown in this manual.NOTE!GGIISSMM  MMeetthhoodd, PPoowweerr  SSaavviinngg: OnlyPPllaassmmaa  TTVV.GGBBaacckklliigghhtt,,  PPoowweerr  IInnddiiccaattoorr,,TTrruuMMoottiioonn  DDeemmoo: Only LLCCDD  TTVV.(But,  TTrruuMMoottiioonn  DDeemmoo:  Only  for3377//4422//4477//5522LLGG6600,,  4422//4477//5522LLGG7700,,  4422LLGGXX,,4477LLGG9900)GGSSeett  IIDD: Except 3322//3377//4422//4477//5522LLGG6600,,  4422LLGGXX.GGLLooccaall  DDiimmmmiinngg, LLooccaall  DDiimmmmiinnggDDeemmoo: Only 4477LLGG9900Display each menu.Select a menu item.Enter to the pop up menu.1MENU32ENTERENTERReturn to TV viewing.4MENUEnterMoveAuto TuningManual TuningChannel EditCHANNELCHANNELOPTIONPICTURELOCKAUDIOINPUTTIMEUSBEnterMoveAspect Ratio   : 16:9Picture Mode  : Standard• Backlight 80 • Contrast 90• Brightness 50• Sharpness 60• Color 60• Tint 0PICTUREEEnterMoveAuto Volume : OffClear Voice : OnBalance 0Sound Mode : Standard• SRS TruSurround XT:Off• Treble 50• Bass 50• ResetAUDIOELREnterMoveClock :Feb/21/2008  2:10 AMOff Time : OffOn Time : OffSleep Timer : OffAuto Sleep : OffTIMEEnterMovePHOTO LISTMUSIC LISTUSBEnterMoveAntennaCableAV1AV2Component1Component2RGB-PCHDMI1INPUTEEnterMoveLock System            : OffSet PasswordBlock ChannelMovie RatingTV Rating-ChildrenTV Rating-GeneralDownloadable RatingInput BlockLOCKLock System            : OffSet PasswordBlock ChannelTV Rating-EnglishTV Rating-FrenchDownloadable RatingInput BlockEnterMoveLanguage : EnglishInput LabelSIMPLINK : OnKey Lock : OffCaption : OffISM Method : NormalPower Saving : Level 0Set ID : 1OPTIONFor USA For CanadaEAll models (Except 32/37/42LG30)RG
WATCHING TV / CHANNEL CONTROL55Only for 32/37/42LG30Display each menu.Select a menu item.Enter to the pop up menu.1MENU32ENTERENTERReturn to TV viewing.4MENUEnterMoveAuto TuningManual TuningChannel EditCHANNELCHANNELTIMEPICTUREOPTIONAUDIOLOCKEnterMoveAspect Ratio   : 16:9Picture Mode  : Standard• Backlight 80 • Contrast 90• Brightness 50• Sharpness 60• Color 60• Tint 0PICTUREEEnterMoveAuto Volume : OffClear Voice : OnBalance 0Sound Mode : Standard• SRS TruSurround XT:Off• Treble 50• Bass 50• ResetAUDIOELREnterMoveClock :Feb/21/2008  2:10 AMOff Time : OffOn Time : OffSleep Timer : OffAuto Sleep : OffTIMEEnterMoveLock System            : OffSet PasswordBlock ChannelMovie RatingTV Rating-ChildrenTV Rating-GeneralDownloadable RatingInput BlockLOCKEnterMoveLanguage : EnglishInput LabelSIMPLINK : OnKey Lock : OffCaption : OffSet ID : 1Power IndicatorInitial Setting : HomeOPTIONLock System            : OffSet PasswordBlock ChannelTV Rating-EnglishTV Rating-FrenchDownloadable RatingInput BlockFor USA For CanadaRG
WATCHING TV / CHANNEL CONTROL56CHANNEL SETUPWATCHING TV / CHANNEL CONTROLAuto Scan (Auto Tuning)Automatically finds all channels available through antenna or cable inputs, and stores them in memory on thechannel list. Run Auto Tuning again after any Antenna/Cable connection changes. Select CCHHAANNNNEELL.Select AAuuttoo  TTuunniinngg.Select YYeess.Run AAuuttoo  ttuunniinngg.EnterMoveCHANNELEnterMoveCHANNEL1MENU32ENTERENTER4ENTERAuto TuningManual TuningChannel EditAuto TuningManual TuningChannel EditPress ‘Yes’ button to beginauto tuning.YesNo■A password is required to gain access toAuto Tuning menu if the Lock System isturned on.5RETURNReturn to the previous menu.MENUReturn to TV viewing.
WATCHING TV / CHANNEL CONTROL57Select CCHHAANNNNEELL.1MENU2ENTERIf selecting DTV or CADTV input signal, you can view the on-screen signal strength monitor to see the qualityof the signal being received.Add/Delete Channel (Manual Tuning)EnterMoveCHANNELEnterMoveCHANNELChannelSelect channel type and RF-channel number.FF              DTVGG2CloseDeleteAuto TuningManual TuningChannel EditDTV 2-1Bad              Normal            GoodSelect MMaannuuaall  TTuunniinngg.Select DDTTVV, TTVV, CCAADDTTVV, or CCAATTVV.Select channel you want to addor delete.3ENTER4Select AAdddd  or DDeelleettee.5ENTERAuto TuningManual TuningChannel Edit■A password is required to gain access toManual Tuning menu if the Lock Systemis turned on.6RETURNReturn to the previous menu.MENUReturn to TV viewing.
WATCHING TV / CHANNEL CONTROL58CHANNEL SETUPWATCHING TV / CHANNEL CONTROLSelect a channel.Select channel you want to add ordelete.3ENTER4ENTERA custom list can be created by toggling each channel on or off with ENTER button. The channels in the CustomList are displayed in black and the channels deleted from the Custom List are displayed in gray. Once a channel is highlighted you can add or delete the channel by referring to the small window at the top-right corner of the screen.Channel EditingEnterMoveCHANNELAuto TuningManual TuningChannel EditSelect CCHHAANNNNEELL.1MENU2ENTERSelect CChhaannnneell  EEddiitt.RETURNReturn to TV viewing.Return to the previous menu.5MENUAdd/Delete Move PageCHMove PreviousMENU ExitRETURN
WATCHING TV / CHANNEL CONTROL59INPUT LISTOnly these input signals which are connected to a TV can be activated and selected.Select the desired input source.■You  can  also  select  the  desired  input  source  in  the  IINNPPUUTT  menu(Except 32/37/42LG30).1INPUTAntenna Cable AV1 AV2 Component1HDMI3 HDMI2 HDMI1 RGB-PCComponent2Antenna Cable AV1 AV2 Component1ENTER■AAnntteennnnaa: Select it to watch over-the-air broadcasts.■CCaabbllee: Select it to watch cable and digital cable.■AAVV: Select them to watch a VCR or other external equipment.■CCoommppoonneenntt: Select them to watch DVD or a Digital set-top box.■RRGGBB--PPCC: Select it to view PC input.■HHDDMMII: Select them to watch high definition devices.Antenna Cable AV1 AV2 Component1Input LabelQ.MENU ExitRETURNSelect  a  desired  input  source  (exceptAAnntteennnnaaor  CCaabbllee).  Then,  you  can  selectyour desired Input Label with using Q. MENUbutton. GGpp..6600Disconnected inputs are inactive (grayed out)ie)32/37/42LG30, 37/42/47/52LG50, 32LG70Antenna Cable AV1 AV2 Component1HDMI4 HDMI3 HDMI2 HDMI1 RGB-PCComponent2Plasma TV, 42/47/52LG70, 47LG90Antenna Cable AV Component1HDMI4 HDMI3 HDMI2 HDMI1 RGB-PCComponent232/37/42/47/52LG60, 42LGX
WATCHING TV / CHANNEL CONTROL60INPUT LABELWATCHING TV / CHANNEL CONTROLYou can set a label for each input source when it's not in use.EnterMoveOPTIONLanguage : EnglishInput LabelSIMPLINK : OnKey Lock : OffCaption : OffISM Method : NormalPower Saving : Level 0Set ID : 1EESelect OOPPTTIIOONN.Select IInnppuutt  LLaabbeell.Select the label.1MENU2ENTERSelect the source.3ENTER45RETURNReturn to the previous menu.MENUReturn to TV viewing.With using OPTION menuSelect the source.Select the label.1INPUT2Q. MENU3RETURNReturn to the previous menu.MENUReturn to TV viewing.With using INPUT button■When new external device is connected, this popup menu is displayed automatically. If selecting YYeess, you can select input source that you want to appreciate.■But, when selecting “SSIIMMPPLLIINNKK- OOnn”, popup menu for HDMI input will not be displayed.NoYes!New external device is connected.Do you want to enjoy this?!Select input source that you want to appreciate.AV1AV2Component1AV1 FFGGAV2Component1HDMI1RGB-PCComponent2HDMI2HDMI3CloseAV1 FFGGAV2Component1HDMI1RGB-PCComponent2HDMI2HDMI3HDMI4CloseFFGGAVComponent1HDMI1RGB-PCComponent2HDMI2HDMI3HDMI4ClosePlasma TV, 42/47/52LG70,47LG9032/37/42/47/52LG60,42LGX32/37/42LG30,37/42/47/52LG50,32LG70
WATCHING TV / CHANNEL CONTROL61AV MODEYou can select the optimal images and sounds.1AV MODE2Off CinemaGame SportOff CinemaGame SportPress the AAVV  MMOODDEEbutton repeatedly to select the desired source.ENTER■If you select  “CCiinneemmaa  //CCiinneemmaa”in  AV  mode,  CCiinneemmaa  will  be  selectedboth  for  “PICTURE  menu  -  PictureMode”  and  “AUDIO  menu  -  SoundMode” respectively.■If  you  select  “OOffff”  in  AV  mode,  the“PPiiccttuurree  MMooddee” and  “SSoouunndd  MMooddee”return to previous selected value. All models (Except 50/60PG60, 50/60PG70)Only for 50/60PG60, 50/60PG70
WATCHING TV / CHANNEL CONTROL62WATCHING TV / CHANNEL CONTROLThis function operates only with devices with the  logo.The TV might not function properly when using it with other products with HDMI-CEC function.This allows you to control and play other AV devices connected with HDMI cable without additional cables andsettings.To start using SIMPLINK, turn it on in the user menus.EnterMoveOPTIONSelect OOPPTTIIOONN.Select SSIIMMPPLLIINNKK.Select OOnn  or OOffff.EnterMoveOPTIONE1MENU32ENTERENTERLanguage : EnglishInput LabelSIMPLINK : OnKey Lock : OffCaption : OffISM Method : NormalPower Saving : Level 0Set ID : 1Language : EnglishInput LabelSIMPLINK : OnKey Lock : OffCaption : OffISM Method : NormalPower Saving : Level 0Set ID : 1OffOnNOTE!GGConnect the HDMI/DVI IN or HDMI IN terminal of the TV to the rear terminal (HDMI terminal) of theSIMPLINK device with the HDMI cable. GGWhen you switch the Input source with the INPUT button on the remote control, the SIMPLINK devicewill stop.GGWhen you select a device with home theater functionality, the sound output automatically switches tothe home theater speakers.GGIf a connected SIMPLINK home theater system doesn't play the audio from the TV, connect the DIGITALAUDIO OUT terminal on the back of the TV to the DIGITAL AUDIO IN terminal on the back of the SIM-PLINK device with an OPTICAL cable.E4RETURNReturn to the previous menu.MENUReturn to TV viewing.
WATCHING TV / CHANNEL CONTROL63■DDiirreecctt  PPllaayy::  After connecting AV devices to the TV, you can directly control the devices and play media with-out additional settings.■SSeelleecctt  AAVV  ddeevviiccee::  Enables you to select one of the AV devices connected to TV.■DDiisscc  ppllaayybbaacckk::  Control connected AV devices by pressing the  , ENTER, G, A, ll  ll, FF and GG buttons. ■PPoowweerr  ooffff  aallll  ddeevviicceess::  When you power off the TV, all connected devices are turned off.■SSwwiittcchh  aauuddiioo--oouutt::  Offers an easy way to switch audio-out.■SSyynncc  PPoowweerr  oonn::  When you play the connected AV device, TV will automatically turn on.(A device, which is connected to the TV through a HDMI cable but does not support SIMPLINK, does not providethis function)Note: To operate SIMPLINK, an HDMI cable over Version 1.2 with *CEC function should be used. (*CEC: ConsumerElectronics Control).SIMPLINK Menu TTVV  vviieewwiinngg:  Switch  to  the  previous  TVchannel regardless of the current mode.DDIISSCC  ppllaayybbaacckk:  Select  and  play  discs.When multiple discs are available, the titlesof  discs  are  conveniently  displayed at  thebottom of the screen.VVCCRR  ppllaayybbaacckk:  Control  the  connectedVCR.HHDDDD  RReeccoorrddiinnggss  ppllaayybbaacckk:  Controlrecordings stored in HDD.AAuuddiioo  OOuutt  ttoo  HHoommee  TThheeaatteerr  ssppeeaakk--eerr//AAuuddiioo  OOuutt  ttoo  TTVV:  Select  HomeTheater  speaker  or  TV  speaker  for  AudioOut.SIMPLINK Functions12345GGWhen no device is connected(displayed in gray)GGSelected  DeviceGGWhen a device is connected(displayed in bright color)12345Display SSIIMMPPLLIINNKK  menu.Select the desired device.Control connected AV devices.1TV32ENTERENTER
USBUSBENTRY MODES64When you connect a USB device, this screen is displayed automatically.In USB device, you can not add a new folder or delete the existing folder.Precautions when using the USB deviceGGOnly a USB storage device is recognizable. GGIf the USB storage device is connected through aUSB hub, the device is not recognizable.GGA USB storage device using an automatic recogni-tion program may not be recognized.GGA  USB  storage  device  which  uses  its  own  drivermay not be recognized.GGIn case of a card reader, up to four memory cardsare concurrently recognizable.GGThe  recognition  speed  of  a  USB  storage  devicemay depend on each device.GGPlease do not turn off the TV or unplug the USBdevice when the connected USB storage device isworking.  When such device is suddenly separatedor unplugged, the stored files or the USB storagedevice may be damaged. GGPlease  do  not  connect  the  USB  storage  devicewhich was artificially maneuvered on the PC.  Thedevice may cause the product to malfunction orfail to be played.  Never forget to use only a USBstorage  device  which  has  normal  music  files  orimage files.GGPlease use only a  USB  storage device which  wasformatted as a FAT or NTFS file system providedwith the Windows operating system.  In case of astorage device formatted as a different utility pro-gram which is not supported by Windows, it maynot be recognized.GGPlease  connect  power  to  a  USB  storage  devicewhich  requires an  external  power  supply.   If  not,the device may not be recognized.GGPlease connect a USB storage device with cable isoffered by USB maker.  If connected with cable isnot offered by USB maker or an excessively longcable, the device may not be recognized.GGSome USB storage devices may not be supportedor operated smoothly.GGFile  alignment  method  of  USB  storage  device  issimilar to Window XP and filename can recognizeup to 100 English characters.GGPlease  backup  important  files  because  data  onUSB device may be damaged. Data management isconsumer's responsibility and as a result, the man-ufacturer does not cover data damage.When removing the USB deviceConnect the USB device to the UUSSBB  IINNjacks on the side of TV. 3Select PPHHOOTTOO  LLIISSTT  or MMUUSSIICCLLIISSTT1MI IN 3 USB INPHOTO LIST MUSIC LISTSelect UUSSBB  EEjjeecctt.Select the UUSSBB  EEjjeeccttmenu before removing theUSB device.2ENTER1Q. MENU2ENTER* Except 32/37/42LG30■It doesn’t support USB HDD■This TV supports JPG and MP3.
PHOTO LISTUSB65You can view .JPG files from USB storage devices.The On Screen Display on your model may be slightly different.Screen ComponentsMoves to upper level filePreview: Display thethumbnail/folder name ofthe photo in the selectedfolderCurrent page/Total pagesTotal number of marked photosUsable USB memoryCorresponding buttons onthe remote controlSupported photo file: *.JPG■You can play JPG files only.■Only baseline scan is supported among JPG.USB DevicePage 1/1 No MarkedPHOTO LISTUpperFree Space 150MBNavigate PopUp Menu Move Page Mark Exit2Folders, 4Files3 4 5112Select UUSSBB.Select PPHHOOTTOO  LLIISSTT.2TOP FOLDERDrive11MENUENTERENTER123456Drive1CH FAV RETURN6
USB66USBPhoto Selection and Popup MenuUSB DevicePage 1/1No MarkedPHOTO LISTUpperFree Space 150MB2Folders, 4FilesUSB DevicePage 1/1No MarkedPHOTO LISTUpperFree Space 150MB1366x768  125KBSelect the target folder or drive.Select the desired photos.2Show the Popup menu.31■Use the CCHH  button to navigation in thephoto page.■Use the FFAAVVbutton to mark or unmark aphoto. When one or more photos are marked,you can view individual photos or a slide showof the marked photos. If no photos are marked,you can view all photos individually or all pho-tos in the folder in a slide show.TOP FOLDERDrive14Select the desired  Popup menu.ENTERENTERENTERNavigate Move Page Mark ExitCH FAV RETURNPopUp MenuNavigate Move Page Mark ExitCH FAV RETURNPopUp MenuDrive1Drive1ButterflyUpper Photo X.Box 1366x768125KBView Mark AllDeleteCancelWhen  you  select  a  file  (not folder),  this  PopUpmenu is displayed.GGVViieeww: Display the selected item. GGMMaarrkk  AAllll: Mark all photos on the screen.GGUUnnmmaarrkk  AAllll: Deselect all marked photos.GGDDeelleettee: Delete the selected photo item.GGCCaanncceell: Close the pop-up menu.
USB67Full Screen MenuYou can change the Photo List view so that it fills the screen. More operations are available in fullscreen mode.■Use the CCHH  button to navigation in thephoto page.The aspect ratio of a photo may change the size ofthe photo displayed on the screen in full size.1/17Sideshow BGM Delete Option HideSelect the target folder or drive.Select the desired photos.Show the Popup menu.5Select VViieeww.The selected photo is displayed infull size.2314ENTERENTERENTERUSB DevicePage 1/1No MarkedPHOTO LISTUpperFree Space 150MB2Folders, 4FilesUSB DevicePage 1/1No MarkedPHOTO LISTUpperFree Space 150MB1366x768  125KBTOP FOLDERDrive1Navigate Move Page Mark ExitCH FAV RETURNPopUp MenuNavigate Move Page Mark ExitCH FAV RETURNPopUp MenuDrive1Drive1ButterflyUpper Photo X.Box 1366x768125KBView Mark AllDeleteCancel
USB68USB1/17Sideshow BGM Delete Option HideSelect the SSiiddeesshhooww, BBGGMM,  ((RRoottaattee)),DDeelleettee,OOppttiioonn, or HHiiddee..Press FF  GGto set the time interval between slides.Slide Speed Fast Cancel...Music FolderENTER■Use  button to select the previous ornext photo. ■Use  button to select and controlthe menu on the full-sized screen.ENTER6GGSSiiddeesshhooww:  Selected photos  are  displayed during  theslide show. If no photo is selected, all photos in the cur-rent folder are displayed during slide show.■Set the time interval of the slide show in OOppttiioonn.■A  slide  show  continues  for  a  maximum  of  4  hours.After 4 hours, the slide show will end and go to TVmode or external input mode.GGBBGGMM: Listen to music while viewing photos in full size. ■Set the BGM device and album in OOppttiioonn.GG((RRoottaattee)): Rotate photos.■Rotates the photo 90°, 18 0 °, 270°, 360°clockwise.GGDDeelleettee: Delete photos.GGOOppttiioonn:  Set  values  for  SSlliiddee  SSppeeeeddand  MMuussiiccFFoollddeerr. ■Use button and EENNTTEERRbutton to set values.Then go to  and press EENNTTEERRto save the set-tings.■You  cannot  change  MMuussiicc  FFoollddeerrwhile  BGM  isplaying.GGHHiiddee  : Hide the menu on the full-sized screen.■To see the menu again on the full-sized screen, pressEENNTTEERR  button to display.NOTE!GGThis TV will not be able to decodemost  JPEG  images  saved  using  theProgressive option.
MUSIC LISTUSB69You can use the Music List menu to play MP3 files form a USB storage device. This TV cannot play back copy-protected files. The On Screen Display on your model may be slightly different.Screen ComponentsSupported music file: *.MP3Bit rate range 40Kbps ~320Kbps• Sampling rate (Sampling Frequency)MPEG1 : 32000, 44100, 48000HzMPEG2 : 16000, 24000, 22050HzMPEG2.5 : 16 ~48KHzMoves to upper level filePreview: If any album jacketfor the file exists, this jack-et is displayed.Current page/Total pagesTotal number of markedmusicsUsable USB memoryCorresponding buttons onthe remote control134562Select UUSSBB.Select MMUUSSIICC  LLIISSTT.12MENUENTERENTERUSB DeviceMUSIC LISTUpperFree Space 150MB3945 KB, 128 KbpsTitle Play TimeUpperGood ByeArirang 04:1205:303 4 512Navigate PopUp Menu Move Page Mark ExitCH FAV RETURN6Page 1/1 No MarkedDrive1Arirang
USBUSB70Music Selection and Popup Menu■Use the CCHH  button to navigation inthe music page.■Use FFAAVVbutton to mark or unmark a musicfile. If no music is marked, all the music in thefolder will be played in sequence. When one ormore music files are marked, the marked musicfiles will be played in sequence. If you want tolisten to only one song repeatedly, just markthat one file and play.Up to 6 music titles are listed per page.Select the target folder or drive.Select the desired musics.Show the Popup menu.Select the desired Popup menu.2314ENTERENTERENTER5RETURNReturn to TV viewingUSB DevicePage 1/1No MarkedMUSIC LISTUpperFree Space 150MB3945 KB, 128 KbpsDrive1ArirangNavigate Move Page Mark ExitCH FAV RETURNPopUp MenuPlay TimeTitleUpperGood ByeArirangUSB DevicePage 1/1No MarkedMUSIC LISTUpperFree Space 150MB3945 KB, 128 KbpsDrive1ArirangNavigate Move Page Mark ExitCH FAV RETURNPopUp MenuPlay TimeTitleUpperGood ByeArirang05:3004:123945 KB128 KbpsPlay Play with PhotoMark AllDeleteCancelGGPPllaayy  (During stop): Play the selected music.Once a song finishes playing, the next selectedone will be played. When there are no selectedmusics to play, the next one in the current fold-er will be played. If you go to a different folderand  press  the  EENNTTEERRbutton,  the  currentmusic in playback will stop.GGPPllaayy  MMaarrkkeedd: Play the selected musics. Oncea music finishes playing, the next selected onewill be played automatically.GGSSttoopp  PPllaayy  (During playback): Stop the play-ing musics.GGPPllaayy  wwiitthh  PPhhoottoo: Start playing the selectedmusics and then move to the Photo List. GGMMaarrkk  AAllll: Mark all musics in the folder.GGUUnnmmaarrkk  AAllll: Deselect all marked music.GGDDeelleettee: Delete the selected music.GGCCaanncceell: Close the pop-up menu.
USB71■The play information box (as shown below) will automaticallymove across the screen when there is no user input to pre-vent a fixed image remaining on the screen for a extendedperiod of time.NOTE!GGWhen music is playing,  is displayed in front of the music play time.GGA damaged or corrupted music file that does not play displays 00:00 as the play time.GGMusic files with copy-protection will not play.GGPress EENNTTEERR, AA, or RREETTUURRNN  button to stop the screen saver.GGThis TV can not play music files less than 16 Kbytes.
PICTURE CONTROL72PICTURE SIZE (ASPECT RATIO) CONTROLPICTURE CONTROLThis feature lets you choose the way an analog picture with a 4:3 aspect ratio is displayed on your TV.■ RGB-PC input source use 4:3 or 16:9 aspect ratio.NOTE!GGIf a fixed image is displayed on the screen for a long time, the image could become imprinted on thescreen and remain visible. This phenomenon is common to all manufacturers and is not covered by warranty. Although, after watch-ing video that did not fill the screen, any after-image from the black bars will normally dissipate after a fewminutes.■You can also adjust AAssppeecctt  RRaattiioointhe QQ--MMeennuu.EnterMovePICTUREEEnterMovePICTUREERGAspect Ratio   : 16:9Picture Mode  : Standard• Backlight 80 • Contrast 90• Brightness 50• Sharpness 60• Color 60• Tint 0Aspect Ratio   : 16:9Picture Mode  : Standard• Backlight 80 • Contrast 90• Brightness 50• Sharpness 60• Color 60• Tint 0 RGSet By Program4:316:9Zoom1Zoom2Just ScanSelect PPIICCTTUURREE.Select AAssppeecctt  RRaattiioo. Select the desired picture format.1MENU32ENTERENTER4RETURNReturn to the previous menu.MENUReturn to TV viewing.
PICTURE CONTROL73Set by programSelects the proper picture proportion to matchthe source’s image. 4:3Choose  4:3  when  you  want  to  view  a  picturewith an original 4:3 aspect ratio.16:9Adjust  the  picture  horizontally,  in  a  linear  pro-portion to fill the entire screen.Zoom 1Choose Zoom 1 when you want to view the pic-ture without any alteration. However, the top andbottom portions of the picture will be cropped.Zoom 2Choose Zoom 2 when you want the picture to bealtered,  both  vertically  extended  and  cropped.The  picture  taking  a  halfway  trade  off  betweenalteration and screen coverage.Just ScanNormally the edges of video signals are cropped1-2%.  Just  Scan  turns  off  this  cropping  andshows the complete video. Notes: If there is noise on the edges of the originalsignal, it will be visible when Just Scan is activated.JJuusstt  SSccaannoperates only inDTV/CADTV/Component/HDMI-DTV/DVI-DTV(720p/1080i/1080p) input source.(4:3 4:3)(16:9 16:9)
PICTURE CONTROL74PRESET PICTURE SETTINGSPICTURE CONTROLPicture Mode - PresetThere are factory presets for picture settings available in the user menus. You can use a preset, change eachsetting manually, or use the Intelligent Sensor.EnterMovePICTUREESelect PPIICCTTUURREE.Select PPiiccttuurree  MMooddee.Select IInntteelllliiggeenntt  SSeennssoorr  (Except32/37/42LG30, Plasma TV), VViivviidd,SSttaannddaarrdd, CCiinneemmaa//CCiinneemmaa(Only for 50/60PG60, 50/60PG70) ,SSppoorrtt, or GGaammee.■When selecting IInntteelllliiggeenntt  SSeennssoorr(Except 32/37/42LG30, Plasma TV), the most suitable picture is automaticallyadjusted  according  to  the  surroundingconditions.■VViivviidd,  SSttaannddaarrdd,  CCiinneemmaa//CCiinneemmaa, SSppoorrtt, and GGaammeeSettings arepreset for the optimum picture quality atthe factory and are not adjustable.■You  can  also  adjust  PPiiccttuurree  MMooddeeinthe QQ..  MMeennuu.■Cinema  (Only  for  50/60PG60,50/60PG70):  This  is  cinema  qualitymode to  provide you the  experience ofwatching a movie at home. The user willbe able enjoy the best level of satisfac-tory screen quality in any movie withoutany  separate adjustments.  Cinemaexpresses  the  optimal  screen  qualitywhen it is darkest.■When  selecting CCiinneemmaa,  Aspectratio changes to Just scan.■(Thomlinson  Holman’s  Experiment)  is  theaudio  and  video  certification  standard  of  THXestablished  by  George  Lucas,  who  directed  themovie Star Wars, and Thomlinson. This is the product to be certified in THX displayarea and guarantees screen quality that exceeds thedisplay standard specification in both hardware andsoftware. 1MENU32ENTERENTERAspect Ratio   : 16:9Picture Mode  : Standard• Backlight 80 • Contrast 90• Brightness 50• Sharpness 60• Color 60• Tint 0 RGIntelligent SensorVividStandardCinemaSportGameExpert1Expert2VividStandardCinemaSportGameExpert1Expert2VividStandardCinemaSportGameExpert1Expert24RETURNReturn to the previous menu.MENUReturn to TV viewing.32/37/42LG30,42/50PG2550/60PG60,50/60PG7037/42/47/52LG50, 32/37/42/47/52LG60,32/42/47/52LG70,42LGX, 47LG90
PICTURE CONTROL75Color Tone - PresetChoose one of three automatic color adjustments. Set to warm to enhance hotter colors such as red, or set tocool to see less intense colors with more blue.EnterMovePICTUREESelect PPIICCTTUURREE.Select CCoolloorr  TTeemmppeerraattuurree.1MENU3ENTERSelect CCooooll, MMeeddiiuumm, or WWaarrmm.4• Brightness 50• Sharpness 60• Color 60• Tint 0• Advanced Control• ResetScreen (RGB-PC)TruMotion DemoSelect AAddvvaanncceedd  CCoonnttrrooll.2ENTER5RETURNReturn to the previous menu.MENUReturn to TV viewing.RGEnterMovePICTUREE• Brightness 50• Sharpness 60• Color 60• Tint 0• Advanced Control• ResetScreen (RGB-PC)TruMotion DemoRGColor TemperatureFFMedium  GGFresh ContrastOffFresh ColorOffNoise ReductionOffGammaMediumBlack LevelLowEye CareOffReal CinemaOffTruMotionHighClose
PICTURE CONTROL76MANUAL PICTURE ADJUSTMENTPICTURE CONTROLPicture Mode - User ModeAdjust the picture appearance to suit your preference and viewing situations.LCD TV only: This feature is disable in “PPiiccttuurree  MMooddee--IInntteelllliiggeenntt  SSeennssoorr”.50/60PG60, 50/60PG70 only: This feature is disabled in “PPiiccttuurree  MMooddee--  CCiinneemmaa”.EnterMovePICTURESelect PPIICCTTUURREE.Make appropriate adjustments.Select BBaacckklliigghhtt  (Only LCD TV), CCoonnttrraasstt,BBrriigghhttnneessss, SShhaarrppnneessss, CCoolloorr, or TTiinntt.1MENUSelect PPiiccttuurree  MMooddee.2ENTERSelect VViivviidd,SSttaannddaarrdd, CCiinneemmaa, SSppoorrtt, or GGaammee.3ENTER4ENTER5ENTEREAspect Ratio   : 16:9Picture Mode  : Standard• Backlight 80 • Contrast 90• Brightness 50• Sharpness 60• Color 60• Tint 0 RG• Backlight 80EEEEEEEEEnter6RETURNReturn to the previous menu.MENUReturn to TV viewing.
PICTURE CONTROL77Select your desired menu option.Select PPIICCTTUURREE.Select PPiiccttuurree  MMooddee.Select EExxppeerrtt  CCoonnttrrooll.Select EExxppeerrtt11or EExxppeerrtt22.1MENU32ENTERENTER4ENTER5ENTERMake appropriate adjustments.6Picture Mode - Expert ControlBy segmenting categories, EExxppeerrtt11and EExxppeerrtt22provide more categories which users can set as they seefit, offering the optimal picture quality for users.EnterMovePICTUREEAspect Ratio   : 16:9Picture Mode  : Standard• Backlight 80 • Contrast 90• Brightness 50• Sharpness 60• Color 60• Tint 0 RGSportGameExpert1Expert27RETURNReturn to the previous menu.MENUReturn to TV viewing.EnterMovePICTUREE• Brightness 50• Sharpness 60• Color 60• Tint 0• Expert Control• ResetScreen (RGB-PC)TruMotion DemoRGFFOff      GGFresh ContrastNoise ReductionOffGamma MediumBlack Level OffOffReal CinemaColor StandardSDWhite Balance Normal•Method 2 Points•Red Contrast 50•Green Contrast50•Blue Contrast 50E
PICTURE CONTROL78PICTURE IMPROVEMENT TECHNOLOGYPICTURE CONTROLFresh Contrast: Optimizes the contrast automatically according to the brightness of the reflection.Fresh Color: Adjusts the color of the reflection automatically to reproduce as close as possible natural colors.Noise Reduction: Removes interference up to the point where it does not damage the original picture.Gamma: High gamma values display whitish images and low gamma values display high contrast images.Color Gamut (Only for 47LG90): Select the range of colors that can be expressed.This feature is disabled in“PPiiccttuurree  MMooddee--VViivviidd, SSppoorrtt”.Select PPIICCTTUURREE.Select AAddvvaanncceedd  CCoonnttrrooll.Select  FFrreesshh  CCoonnttrraasstt,  FFrreesshh  CCoolloorr,  NNooiisseeRReedduuccttiioonn, GGaammmmaa, or CCoolloorr  GGaammuutt.1MENU32ENTERENTER5RETURNReturn to the previous menu.MENUReturn to TV viewing.Select your desired options.4EnterMovePICTUREE• Brightness 50• Sharpness 60• Color 60• Tint 0• Advanced Control• ResetScreen (RGB-PC)TruMotion DemoRGEnterMovePICTUREE• Brightness 50• Sharpness 60• Color 60• Tint 0• Advanced Control• ResetScreen (RGB-PC)TruMotion DemoRGColor TemperatureMediumFresh ContrastFF        Off GGFresh ColorOffNoise ReductionOffGammaMediumBlack LevelLowEye CareOffReal CinemaOffTruMotionHighClose
PICTURE CONTROL79ADVANCED CONTROL - BLACK (DARKNESS) LEVELAdjusting the contrast and the brightness of the screen using the black level of the screen.  This feature is disabled in DTV and RGB-PC mode.Select PPIICCTTUURREE.Select AAddvvaanncceedd  CCoonnttrrooll.Select BBllaacckk  LLeevveell.1MENU32ENTERENTERSelect LLoowwor HHiigghh.4■LLooww: The reflection of the screen getsdarker.■HHiigghh: The reflection of the screen getsbrighter.■AAuuttoo: Realizing the black level of thescreen and set it to High or Low auto-matically.5RETURNReturn to the previous menu.MENUReturn to TV viewing.EnterMovePICTUREE• Brightness 50• Sharpness 60• Color 60• Tint 0• Advanced Control• ResetScreen (RGB-PC)TruMotion DemoRGEnterMovePICTUREE• Brightness 50• Sharpness 60• Color 60• Tint 0• Advanced Control• ResetScreen (RGB-PC)TruMotion DemoRGColor TemperatureMediumFresh ContrastOffFresh ColorOffNoise ReductionAutoGammaMediumBlack LevelFF        Low GGEye CareOffReal CinemaOffTruMotionHighClose
PICTURE CONTROL80ADVANCED CONTROL - EYE CARE - LCD TV Only PICTURE CONTROLDims extremely bright pictures.This feature is disabled in “PPiiccttuurree  MMooddee--VViivviidd, CCiinneemmaa”.Select PPIICCTTUURREE.Select AAddvvaanncceedd  CCoonnttrrooll.Select EEyyee  CCaarree.1MENU32ENTERENTERSelect OOnnor OOffff.45RETURNReturn to the previous menu.MENUReturn to TV viewing.EnterMovePICTUREE• Brightness 50• Sharpness 60• Color 60• Tint 0• Advanced Control• ResetScreen (RGB-PC)TruMotion DemoRGEnterMovePICTUREE• Brightness 50• Sharpness 60• Color 60• Tint 0• Advanced Control• ResetScreen (RGB-PC)TruMotion DemoRGColor TemperatureMediumFresh ContrastOffFresh ColorOffNoise ReductionOffGammaMediumBlack LevelLowEye CareFF        Off GGReal CinemaAutoTruMotionHighClose
PICTURE CONTROL81ADVANCED CONTROL - REAL CINEMA / FILM MODESet up the TV for the best picture appearance for viewing movies.When you operate Real Cinema/Film Mode (3:2 Pull-Down Mode or Cinema Correction Mode), the TV willadjust 24 fps video from movies to 30 fps video for display.■Plasma TV, 32/37/42LG30This feature operates only in TV (Analog TV/CATV, Digital DTV/CADTV), AV1, AV2, Component 480i/1080i,and HDMI 1080i mode.■37/42/47/52LG50, 32LG60, 32LG70This feature operates only in TV (Analog TV/CATV, Digital DTV/CADTV), AV1, AV2, Component 480i/1080i,and HDMI 1080i mode. This TV ouputs 48Hz in DTV, Component, and HDMI 1080p (24Hz).■37/42/47/52LG60, 42/47/52LG70, 42LGX, 47LG90This function works with all inputs except PC mode.Select PPIICCTTUURREE.Select AAddvvaanncceedd  CCoonnttrrooll.Select RReeaall  CCiinneemmaaor FFiillmmMMooddee.1MENU32ENTERENTERSelect OOnnor OOffff.45RETURNReturn to the previous menu.MENUReturn to TV viewing.EnterMovePICTUREE• Brightness 50• Sharpness 60• Color 60• Tint 0• Advanced Control• ResetScreen (RGB-PC)TruMotion DemoRGEnterMovePICTUREE• Brightness 50• Sharpness 60• Color 60• Tint 0• Advanced Control• ResetScreen (RGB-PC)TruMotion DemoRGColor TemperatureMediumFresh ContrastOffFresh ColorOffNoise ReductionOffGammaMediumBlack LevelLowFilm ModeFF        Off GGCloseColor TemperatureMediumFresh ContrastOffFresh ColorOffNoise ReductionOffGammaMediumBlack LevelLowEye CareOffReal CinemaFF        Off GGTruMotionHighCloseFor Plasma TVFor LCD TVReal CinemaOnOnTruMotionOffOnScreen5:5 Pull-Down3:2 Pull-Down
PICTURE CONTROL82ADVANCED CONTROL - TRUMOTION - Only 37/42/47/52LG60, 42/47/52LG70, 42LGX, 47LG90TRUMOTION DEMO - Only 37/42/47/52LG60, 42/47/52LG70, 42LGX, 47LG90PICTURE CONTROL■HHiigghh: Provides smoother picture movement.■LLooww:  Provides  smooth  picture  movement.  Usethis setting for standard use.■OOffff: Use this setting when “High”and “Low” set-ting result in noise.■If  you enable  "TruMotion", noise  may  appear onthe screen. If this occurs, set "TruMotion" to "Off".EnterMovePICTUREE• Brightness 50• Sharpness 60• Color 60• Tint 0• Advanced Control• ResetScreen (RGB-PC)TruMotion DemoRGEnterMovePICTUREE• Brightness 50• Sharpness 60• Color 60• Tint 0• Advanced Control• ResetScreen (RGB-PC)TruMotion DemoRGColor TemperatureMediumFresh ContrastOffFresh ColorOffNoise ReductionOffGammaMediumBlack LevelLowEye CareOffReal CinemaOffTruMotionFF      High GGCloseSelect PPIICCTTUURREE.Select AAddvvaanncceedd  CCoonnttrrooll.Select TTrruuMMoottiioonn.1MENU32ENTERENTERSelect OOffff, LLooww, or HHiigghh.45RETURNReturn to the previous menu.MENUReturn to TV viewing.TruMotion On TruMotion OffLG’s Advanced TruMotion 120Hz technology provides images whiUse this feature to see the difference TruMotion makes.TruMotion works with all inputs except PC mode.EnterMovePICTUREE• Brightness 50• Sharpness 60• Color 60• Tint 0• Advanced Control• ResetScreen (RGB-PC)TruMotion DemoRGSelect PPIICCTTUURREE.Select TTrruuMMoottiioonn  DDeemmoo.1MENU2ENTER34ENTERBegin TTrruuMMoottiioonn  DDeemmoo.MENUStop TTrruuMMoottiioonn  DDeemmoo.RETURNReturn to TV viewing.ExitRETURNTruMotion provides even better quality for movies than 3:2 Pull-Down conversions. TruMotion means the panel supports faster frame rates that normal panels which makes for smoother motionin video. TruMotion LCD models support 120Hz instead of 60Hz. This means twice the information on thescreen in the same amount of time and easier film conversions (120 is equally divisible by 24, so no interpre-tations or double frames are needed).TruMotion works with all inputs except PC mode.
PICTURE CONTROL83LOCAL DIMMING - Only 47LG90After analyzing the signal of the input video by areas of the screen, it adjusts the backlight to improve thecontrast ratio. This feature is disabled in “PPiiccttuurree  MMooddee--CCiinneemmaa,,  GGaammee”.EnterMovePICTUREE• Color 60• Tint 0• Advanced Control• ResetLocal Dimming : OnScreen (RGB-PC)TruMotion DemoLocal Dimming DemoRGEnterMovePICTUREE• Color 60• Tint 0• Advanced Control• ResetLocal Dimming : OnScreen (RGB-PC)TruMotion DemoLocal Dimming DemoRGOffOnSelect PPIICCTTUURREE.Select LLooccaall  DDiimmmmiinngg.1MENU2ENTERSelect OOnnor OOffff.3ENTER4RETURNReturn to the previous menu.MENUReturn to TV viewing.LOCAL DIMMING DEMO - Only 47LG90Use this feature to see the difference Local Dimming makes.Select PPIICCTTUURREE.Select LLooccaall  DDiimmmmiinnggDDeemmoo.1MENU2ENTER34ENTERBegin LLooccaall  DDiimmmmiinnggDDeemmoo.MENUStop LLooccaall  DDiimmmmiinnggDDeemmoo.RETURNReturn to TV viewing.EnterMovePICTUREE• Color 60• Tint 0• Advanced Control• ResetLocal Dimming : OnScreen (RGB-PC)TruMotion DemoLocal Dimming DemoRGLED TruMotion On LED TruMotion OffLG’s Advanced TruMotion 120Hz technology provides images whiExitRETURN
PICTURE CONTROL84PICTURE RESETPICTURE CONTROLSettings of the selected picture modes return to the default factory settings.Select PPIICCTTUURREE.Select RReesseett.Initialize the adjusted value.1MENU32ENTERENTER4MENUReturn to TV viewing.EnterMovePICTUREE• Brightness 50• Sharpness 60• Color 60• Tint 0• Advanced Control• ResetScreen (RGB-PC)TruMotion DemoRGEnterMovePICTUREE• Brightness 50• Sharpness 60• Color 60• Tint 0• Advanced Control• ResetScreen (RGB-PC)TruMotion DemoRGResetting video configuration...ii
PICTURE CONTROL85POWER INDICATOR - LCD TV Only Select OOPPTTIIOONN.Select PPoowweerr  IInnddiiccaattoorr.1MENU2ENTERSelect  SSrraarrttuupp  SSoouunndd,SSttaannddbbyyLLiigghhtt,PPoowweerr  LLiigghhtt  or DDeemmoo  MMooddee.3ENTERSelect your desired options.45RETURNReturn to the previous menu.MENUReturn to TV viewing.■SSttaarrttuupp  SSoouunndd: You  can  turn  off  thestarting sound of the TV or set the vol-ume.■SSttaannddbbyy  LLiigghhtt: You can set thebrightness of the LED on the front sideof the TV during power standby.■PPoowweerr  LLiigghhtt: You can set the the LEDon the front side of the TV to be turnedon or off while watching the TV.■DDeemmoo  MMooddee:  You  can  set  the  LED  onthe front side of the TV to flash.EnterMoveOPTIONLanguage : EnglishInput LabelSIMPLINK : OnKey Lock : OffCaption : OffSet ID : 1Power IndicatorInitial Setting : HomeEnterMoveOPTIONLanguage : EnglishInput LabelSIMPLINK : OnKey Lock : OffCaption : OffSet ID : 1Power IndicatorInitial Setting : HomeStandby LightOnDemo Mode OffSrartup SoundOffCloseFF          Low     GGPower LightOnly for32/37/42/47/52LG60,42LGX
PICTURE CONTROL86IMAGE STICKING MINIMIZATION (ISM) METHOD - Plasma TV OnlyPICTURE CONTROLA frozen still picture from a PC/video game displayed on the screen for prolonged periods can result in a ghostimage. You can use Orbiter to help prevent image sticking. The other two functions are for removing a ghostimage.GGAn excessive ghosted image may be impossible toclear entirely with White Wash. To return to nor-mal viewing, press the any button.NOTE!EnterMoveOPTIONLanguage : EnglishInput LabelSIMPLINK : OnKey Lock : OffCaption : OffISM Method : NormalPower Saving : Level 0Set ID : 1NormalOrbiterInversionWhite WashEE■NNoorrmmaall:  If  image  sticking  is  never  aproblem,  ISM  is  not  necessary  -  set  toNormal.■OOrrbbiitteerr:  Orbiter  may  help  preventghost images. However, it is best not toallow any  fixed  image  to  remain  on  thescreen.  To  avoid  a  ghost  image  on  thescreen, the image will move every 2 min-utes.■IInnvveerrssiioonn:  Inversion  will  automaticallyinvert  the  plasma  display  panel  colorevery 30 minutes.■WWhhiittee  WWaasshh:  White  Wash  removesghost images from the screen. Use spar-ingly. Watch the TV normally for a whilebefore  using  this  feature  to  see  if  theghost image disappears on its own.Select OOPPTTIIOONN.Select IISSMM  MMeetthhoodd.1MENU2ENTERSelect NNoorrmmaall,,  OOrrbbiitteerr,,IInnvveerrssiioonn  or WWhhiittee  WWaasshh..  3ENTER4RETURNReturn to the previous menu.MENUReturn to TV viewing.EnterMoveOPTIONLanguage : EnglishInput LabelSIMPLINK : OnKey Lock : OffCaption : OffISM Method : NormalPower Saving : Level 0Set ID : 1EE
PICTURE CONTROL87POWER SAVING PICTURE MODE - Plasma TV OnlyIt reduces the plasma display’s power consumption.EnterMoveOPTIONEnterMoveOPTIONLanguage : EnglishInput LabelSIMPLINK : OnKey Lock : OffCaption : OffISM Method : NormalPower Saving : Level 0Set ID : 1Language : EnglishInput LabelSIMPLINK : OnKey Lock : OffCaption : OffISM Method : NormalPower Saving : Level 0Set ID : 1Level 0Level 1Level 2Level 3Level 4■Level 0 is the brightest.■Level  0  >  Level  1  >  Level  2  >  Level  3  >Level 4■You  can  also  adjust  PPoowweerr  SSaavviinngginthe QQ..  MMeennuu.EEEESelect OOPPTTIIOONN.Select PPoowweerr  SSaavviinngg.1MENU2ENTERSelect LLeevveell  00, LLeevveell  11,LLeevveell  22, LLeevveell  33, or LLeevveell  44.3ENTER4RETURNReturn to the previous menu.MENUReturn to TV viewing.
SOUND & LANGUAGE CONTROL88SOUND & LANGUAGE CONTROLAUTO VOLUME LEVELER (AUTO VOLUME)Auto Volume makes sure that the volume level remains consistent whether you are watching a commercial or aregular TV program.Select AAUUDDIIOO.Select AAuuttoo  VVoolluummee.Select OOnnor OOffff.EnterMoveAUDIOELREnterMoveAUDIOELR1MENU32ENTERENTERAuto Volume : OffClear Voice : OnBalance 0Sound Mode : Standard• SRS TruSurround XT:Off• Treble 50• Bass 50• ResetAuto Volume : OnClear Voice : OnBalance 0Sound Mode : Standard• SRS TruSurround XT:Off• Treble 50• Bass 50• ResetOffOn4RETURNReturn to the previous menu.MENUReturn to TV viewing.
SOUND & LANGUAGE CONTROL89PRESET SOUND SETTINGS (SOUND MODE)Sound Mode  lets you enjoy the  best sound  without any  special adjustment  as the  TV  sets the  appropriatesound options based on the program content.SSttaannddaarrdd, MMuussiicc, CCiinneemmaa, SSppoorrtt, and GGaammeeare preset for optimum sound quality at the factory and arenot adjustable.Select AAUUDDIIOO.Select SSoouunndd  MMooddee.Select SSttaannddaarrdd, MMuussiicc,CCiinneemmaa, SSppoorrtt, or GGaammee.1MENU32ENTERENTEREnterMoveAUDIOELREnterMoveAUDIOELRAuto Volume : OffClear Voice : OnBalance 0Sound Mode : Standard• SRS TruSurround XT:Off• Treble 50• Bass 50• ResetAuto Volume : OffClear Voice : OnBalance 0Sound Mode : Standard• SRS TruSurround XT:Off• Treble 50• Bass 50• ResetStandardMusicCinemaSportGame■You can also adjust SSoouunndd  MMooddeeinthe QQ..  MMeennuu.4RETURNReturn to the previous menu.MENUReturn to TV viewing.
SOUND & LANGUAGE CONTROL90SOUND & LANGUAGE CONTROLSOUND SETTING ADJUSTMENT - USER MODESRS TRUSURROUND XTAdjust the sound to suit your taste and room situations. Select AAUUDDIIOO.Select SSoouunndd  MMooddee.Select TTrreebblleeor BBaassss.1MENU42ENTERSelect SSttaannddaarrdd, MMuussiicc,CCiinneemmaa, SSppoorrtt, or GGaammee.3ENTERENTEREnterMoveAUDIOLREAuto Volume : OffClear Voice : OnBalance 0Sound Mode : Standard• SRS TruSurround XT:Off• Treble 50• Bass 50• ResetEnterMoveAUDIOLREAuto Volume : OffClear Voice : OnBalance 0Sound Mode : Standard• SRS TruSurround XT:Off• Treble 50• Bass 50• ResetSelect AAUUDDIIOO.Select SSRRSS  TTrruuSSuurrrroouunndd  XXTTSelect OOnnor OOffff.1MENU32ENTERENTER■SSRRSS  TTrruuSSuurrrroouunndd  XXTT:  Takes  advantage  ofany  multi-channel  format  without  needing  toadd extra speakers or equipment. Dialog clarity,bass  enrichment,  and  the  addition  of  stereoaudio  enhancement  produces  an  immersivesound experience from standard stereo material. 6RETURNReturn to the previous menu.MENUReturn to TV viewing.4RETURNReturn to the previous menu.MENUReturn to TV viewing.CloseEEEETreble 50Bass 50SRS TruSurround XTOffMake appropriate adjustments.5ENTER
SOUND & LANGUAGE CONTROL91CLEAR VOICEBy differentiating the human sound range from others, it improves the sound quality of voices.■If you select  “CClleeaarr  VVooiiccee--OOnn”,   SSRRSSTTrruuSSuurrrroouunndd  XXTTfeature  will  notwork.■You can also adjust CClleeaarr  VVooiicceein theQQ--MMeennuu.EnterMoveAUDIOELREnterMoveAUDIOELRAuto Volume : OffClear Voice : OnBalance 0Sound Mode : Standard• SRS TruSurround XT:Off• Treble 50• Bass 50• ResetAuto Volume : OffClear Voice : OnBalance 0Sound Mode : Standard• SRS TruSurround XT:Off• Treble 50• Bass 50• ResetOffOnSelect AAUUDDIIOO.Select CClleeaarr  VVooiiccee.Select OOnnor OOffff.1MENU32ENTERENTER4RETURNReturn to the previous menu.MENUReturn to TV viewing.
SOUND & LANGUAGE CONTROL92BALANCESOUND & LANGUAGE CONTROLSelect AAUUDDIIOO.Select BBaallaannccee.Make appropriate adjustments.1MENU32ENTERENTERAdjust the left/right sound of speaker to suit your taste and room situations.EnterMoveAUDIOEnterMoveAUDIOLREAuto Volume : OffClear Voice : OnBalance 0Sound Mode : Standard• SRS TruSurround XT:Off• Treble 50• Bass 50• ResetLREAuto Volume : OffClear Voice : OnBalance 0Sound Mode : Standard• SRS TruSurround XT:Off• Treble 50• Bass 50• ResetCloseEEEEBalance         0 LR4RETURNReturn to the previous menu.MENUReturn to TV viewing.
SOUND & LANGUAGE CONTROL93TV SPEAKERS ON/OFF SETUPTurn the TV speakers off if using external audio equipment.EnterMoveAUDIOEClear Voice : OnBalance 0Sound Mode : Standard• SRS TruSurround XT:Off• Treble 50• Bass 50• ResetTV Speaker : OnSelect AAUUDDIIOO.Select TTVV  SSppeeaakkeerr.Select OOnnor OOffff.1MENU32ENTERENTER4RETURNReturn to the previous menu.MENUReturn to TV viewing.LREnterMoveAUDIOEClear Voice : OnBalance 0Sound Mode : Standard• SRS TruSurround XT:Off• Treble 50• Bass 50• ResetTV Speaker : OnLROffOn
SOUND & LANGUAGE CONTROL94AUDIO RESETSOUND & LANGUAGE CONTROLSettings of the selected Sound Mode return to the default factory settings.Select AAUUDDIIOO.Select RReesseett.1MENU2ENTERInitialize the adjusted value.3ENTEREnterMoveAUDIOELRAuto Volume : OffClear Voice : OnBalance 0Sound Mode : Standard• SRS TruSurround XT:Off• Treble 50• Bass 50• ResetResetting audio configuration...ii4MENUReturn to TV viewing.EnterMoveAUDIOLREAuto Volume : OffClear Voice : OnBalance 0Sound Mode : Standard• SRS TruSurround XT:Off• Treble 50• Bass 50• Reset
SOUND & LANGUAGE CONTROL95STEREO/SAP BROADCAST SETUPFor Analog only: This TV can receive MTS stereo programs and any SAP (Secondary Audio Program) that accom-panies the stereo program if the station transmits an additional sound signal. Mono sound is automatically usedif the broadcast is only in Mono.Q.MenuClose316:9VividOffStandardOffFF      English  GGOffAddEjectAspect RatioBacklightClear VoicePicture ModeSound ModeCaptionMulti AudioSleep TimerDel/Add/FavUSB EjectCHSelect SSAAPP.Select MMoonnoo, SStteerreeoo, or SSAAPP.Return to TV viewing.1Q. MENU32Q. MENUSelect MMuullttii  AAuuddiioo.Select other languages.Return to TV viewing.1Q. MENU32Q. MENUAnalog TV Digital TVQ.MenuClose316:9VividOffStandardOffFF      English  GGOffAddEjectAspect RatioPower SavingClear VoicePicture ModeSound ModeCaptionMulti AudioSleep TimerDel/Add/FavUSB EjectCHLCD TVPlasma TV
SOUND & LANGUAGE CONTROL96AUDIO LANGUAGE SOUND & LANGUAGE CONTROLOther languages may be available if a digital signal is provided by the broadcasting station. This feature operates only in DTV/CADTV mode.Select OOPPTTIIOONN.Select LLaanngguuaaggee.Select AAuuddiioo.1MENU32ENTERENTERSelect  your  desired  language:EEnngglliisshh, SSppaanniisshh, or FFrreenncchh4EnterMoveOPTIONLanguage : EnglishInput LabelSIMPLINK : OnKey Lock : OffCaption : OffISM Method : NormalPower Saving : Level 0Set ID : 1Menu EnglishAudio FFEnglish     GGCloseEnterMoveOPTIONEELanguage : EnglishInput LabelSIMPLINK : OnKey Lock : OffCaption : OffISM Method : NormalPower Saving : Level 0Set ID : 15RETURNReturn to the previous menu.MENUReturn to TV viewing.
SOUND & LANGUAGE CONTROL97ON-SCREEN MENUS LANGUAGE SELECTIONThe menus can be shown on the screen in the selected language.Select OOPPTTIIOONN.Select LLaanngguuaaggee.Select MMeennuu.1MENU32ENTERENTERSelect your desired language.From this point on, the on-screen menuswill be shown in the selected language.4EnterMoveOPTIONLanguage : EnglishInput LabelSIMPLINK : OnKey Lock : OffCaption : OffISM Method : NormalPower Saving : Level 0Set ID : 1EnterMoveOPTIONEELanguage : EnglishInput LabelSIMPLINK : OnKey Lock : OffCaption : OffISM Method : NormalPower Saving : Level 0Set ID : 1Menu FFEnglish       GGAudio EnglishClose5RETURNReturn to the previous menu.MENUReturn to TV viewing.
SOUND & LANGUAGE CONTROL98CAPTION MODESOUND & LANGUAGE CONTROLCaption must be provided to help people with hearing loss watch TV. Select a caption mode for displaying cap-tioning information if provided on a program. Analog caption displays information at any position on the screenand is usually the program's dialog. Caption/Text, if provided by the broadcaster, would be available for bothdigital and analog channels on the Antenna/Cable. This TV is programmed to memorize the caption/text modewhich was last set when you turned the power off. This function is only available when CCaappttiioonnMode is set OOnn.Select OOPPTTIIOONN.Select CCaappttiioonn.Select OOnn.1MENU32ENTERENTERSelect CCCC11-44or TTeexxtt11-44.4EnterMoveOPTIONEnterMoveOPTIONLanguage : EnglishInput LabelSIMPLINK : OnKey Lock : OffCaption : OffISM Method : NormalPower Saving : Level 0Set ID : 1Language : EnglishInput LabelSIMPLINK : OnKey Lock : OffCaption : CC1ISM Method : NormalPower Saving : Level 0Set ID : 1Mode CC1CloseDigital OptionFFOnGGAnalog Broadcasting System Captions■When selecting OOffff, Sub-menus forAnalog, DTV, and Digital Optionbecome disabled.■CCAAPPTTIIOONNThe  term  for  the  words  that  scrollacross  the  bottom  of  the  TV  screen;usually  the  audio  portion  of  the  pro-gram provided for the hearing impaired. ■TTEEXXTTThe term for the words that appear in alarge black frame and almost  cover theentire screen; usually messages provid-ed by the broadcaster.E E5RETURNReturn to the previous menu.MENUReturn to TV viewing.
SOUND & LANGUAGE CONTROL99Digital Broadcasting System CaptionsChoose the language you want the DTV/CADTV Captions to appear in.Other Languages can be chosen for digital sources only if they are included on the program.This function in only available when Caption Mode is set On.Select OOPPTTIIOONN.Select CCaappttiioonn.Select OOnn.1MENU32ENTERENTERSelect CCCC11-44, TTeexxtt11-44, orSSeerrvviiccee11- 66.4EnterMoveOPTIONEnterMoveOPTIONLanguage : EnglishInput LabelSIMPLINK : OnKey Lock : OffCaption : OffISM Method : NormalPower Saving : Level 0Set ID : 1Language : EnglishInput LabelSIMPLINK : OnKey Lock : OffCaption : CC1ISM Method : NormalPower Saving : Level 0Set ID : 1E EMode CC1CloseDigital OptionFF  OnGG5RETURNReturn to the previous menu.MENUReturn to TV viewing.
SOUND & LANGUAGE CONTROL100SOUND & LANGUAGE CONTROLCaption OptionCustomize the DTV/CADTV captions that appear on your screen.This function in only available when Caption Mode is set On.EnterMoveOPTIONEnterMoveOPTIONLanguage : EnglishInput LabelSIMPLINK : OnKey Lock : OffCaption : OffISM Method : NormalPower Saving : Level 0Set ID : 1Language : EnglishInput LabelSIMPLINK : OnKey Lock : OffCaption : CC1ISM Method : NormalPower Saving : Level 0Set ID : 1Mode Service1CloseDigital OptionFF  OnGGSelect OOPPTTIIOONN.Select CCaappttiioonnSelect OOnn.1MENU32ENTERENTERSelect CCuussttoomm.5ENTERCustomize the SSttyyllee, FFoonntt, etc., to yourpreference. A preview icon is provided atthe bottom of the screen, use it to see thecaption language.6Select DDiiggiittaall  OOppttiioonn.4Size A   StandardFont Font 1Text Color WhiteText OpacitySolidEdge TypeNoneEdge ColorBlackBg Color BlackBg OpacitySolidCloseFFCustom           GG■SSiizzee: Set the word size.■FFoonntt: Select a typeface for the text.■TTeexxtt  CCoolloorr: Choose a color for thetext.■TTeexxtt  OOppaacciittyy: Specify the opacityfor the text color.■BBgg  ((BBaacckkggrroouunndd))  CCoolloorr: Select abackground color.■BBgg  ((BBaacckkggrroouunndd))  OOppaacciittyy: Selectthe opacity for the background color.■EEddggee  TTyyppee: Select an edge type.■EEddggee  CCoolloorr: Select a color for theedges.EE7RETURNReturn to the previous menu.MENUReturn to TV viewing.
TIME SETTING101CLOCK SETTINGTIME SETTINGAuto Clock SetupThe time is set automatically from a digital channel signal.  The digital channel signal includes information for the current time provided by the broadcasting station.Set the clock manually if the current time is set incorrectly by the auto clock function.EnterMoveTIMEEnterMoveTIMEClock :Feb/21/2008 2:10 AMOff Time : OffOn Time : OffSleep Timer : OffAuto Sleep : OffClock :Feb/21/2008 2:10 AMOff Time : OffOn Time : OffSleep Timer : OffAuto Sleep : OffYearMonth 2Date 21Hour 2 AM2008Minute 10Time Zone EasternDaylightSaving AutoCloseFF                            Auto GGSelect TTIIMMEE.Select CClloocckk.Select AAuuttoo.1MENU32ENTERENTERSelect your viewing area time zone.• U.S.A:  EEaasstteerrnn,  CCeennttrraall,  MMoouunnttaaiinn,PPaacciiffiicc, AAllaasskkaa, or HHaawwaaiiii.• Canada:  EEaasstteerrnn,  CCeennttrraall,  MMoouunnttaaiinn,PPaacciiffiicc, NNeeww  FF..llaanndd, or AAttllaannttiicc.4Select  AAuuttoo,  OOffff,  or  OOnn(depending  onwhether  or  not  your  viewing  area  observesDaylight Saving time).56RETURNReturn to the previous menu.MENUReturn to TV viewing.
TIME SETTING102TIME SETTINGManual Clock SetupIf the current time setting is wrong, set the clock manually.EnterMoveTIMEEnterMoveTIMEClock :Feb/21/2008 2:10 AMOff Time : OffOn Time : OffSleep Timer : OffAuto Sleep : OffClock :Feb/21/2008 2:10 AMOff Time : OffOn Time : OffSleep Timer : OffAuto Sleep : OffYearMonth 2Date 21Hour 2 AM2008Minute 10Time Zone EasternDaylightSaving AutoCloseFFManualGGSelect TTIIMMEE.Select CClloocckk.Select MMaannuuaall.1MENU32ENTERENTERSelect the Year, Month, Date, Hour, or Minutesoption.4Set the  Year,  Month,  Date,  Hour,  or  Minutesoption.56RETURNReturn to the previous menu.MENUReturn to TV viewing.
TIME SETTING103AUTO ON/OFF TIME SETTINGThis function operates only if the current time has been set.The OOffff  TTiimmeefunction overrides the OOnn  TTiimmeefunction if they are both set to the same time.The TV must be in standby mode for the OOnn  TTiimmeeto work.If you do not press any button within 2 hours after the TV turns on with the OOnn  TTiimmeefunction, the TV willautomatically revert to standby mode.■To cancel OOnn//OOffff  TTiimmeefunction, select OOffff.■Only for On Time function Select IInnppuutt.Select the desired input source.EnterMoveTIMEEnterMoveTIMEClock :Feb/21/2008  2:10 AMOff Time : OffOn Time : OffSleep Timer : OffAuto Sleep : OffClock :Feb/21/2008  2:10 AMOff Time : OffOn Time : 6:30 AM (Once)Sleep Timer : OffAuto Sleep : OffRepeat FF          OnceGGHour 6 AMMinute 30Input TVChannel TV 2-0Volume 30CloseSelect TTIIMMEE.Select OOffff  ttiimmeeor OOnn  ttiimmee.Select RReeppeeaatt.1MENU32ENTERENTERSelect OOffff, OOnnccee, EEvveerryyddaayy, MMoonn~FFrrii,MMoonn~SSaatt, WWeeeekkeenndd, or SSuunnddaayy.4Select and set HHoouurror MMiinnuuttee.51ENTER342When Selecting TTVV:set the channel at turn-on.Adjust to sound level atturn-on.6RETURNReturn to the previous menu.MENUReturn to TV viewing.
TIME SETTING104TIME SETTINGSLEEP TIMER SETTINGThe Sleep Timer turns the TV off at the preset time.Note that this setting is cleared when the TV is turned off.■You can also adjust SSlleeeepp  TTiimmeerrinthe QQ--MMeennuu.EnterMoveTIMEEnterMoveTIMEClock :Feb/21/2008  2:10 AMOff Time : OffOn Time : OffSleep Timer : OffAuto Sleep : OffClock :Feb/21/2008  2:10 AMOff Time : OffOn Time : OffSleep Timer : OffAuto Sleep : OffSelect TTIIMMEE.Select SSlleeeepp  TTiimmeerr.Select OOffff, 1100, 2200, 3300, 6600, 9900,112200, 118800, or 224400minutes.1MENU32ENTERENTERCloseFFOff GG4RETURNReturn to the previous menu.MENUReturn to TV viewing.
TIME SETTING105AUTO SHUT-OFF SETTINGTV will be automatically turned off, in case of no signal for 10 minutes.EnterMoveTIMEEnterMoveTIMEClock :Feb/21/2008  2:10 AMOff Time : OffOn Time : OffSleep Timer : OffAuto Sleep : OffClock :Feb/21/2008  2:10 AMOff Time : OffOn Time : OffSleep Timer : OffAuto Sleep : OnSelect TTIIMMEE.Select AAuuttoo  SSlleeeepp.Select OOnnor OOffff.1MENU32ENTERENTEROffOnTV will be automatically turned off, in case of No Signal for 10 minutes.4RETURNReturn to the previous menu.MENUReturn to TV viewing.
PARENTAL CONTROL / RATING106PARENTAL CONTROL / RATINGSParental Control can be used to block specific channels, ratings and other viewing sources.The Parental Control Function (V-Chip) is used to block program viewing based on the ratings sent by the broad-casting station. The default setting is to allow all programs to be viewed. Viewing can be blocked by choosing thetype of the program and the categories. It is also possible to block all program viewing for a time period. To usethis function, the following must be done :1. Set ratings and categories to be blocked.2. Specify a password3. Enable the lockV-Chip rating and categoriesRating guidelines are provided by broadcasting stations. Most television programs and television movies can beblocked by TV Rating and/or Individual Categories. Movies that have been shown at the theaters or direct-to-video movies use the Movie Rating System (MPAA)only.Ratings for Television programs including made-for-TV movies :■TV-G (General audience)■TV-PG (Parental guidance suggested)■TV-14 (Parents strongly cautioned)■TV-MA (Mature audience only)■TV-Y (All children)■TV-Y7 (Children 7 years older)Set up blocking schemes to block specific channels, ratings, and external viewing sources.A password is required to gain access to this menu.Setting up Your PasswordFor USAEnterMoveLOCKLock System            : OffSet PasswordBlock ChannelMovie RatingTV Rating-ChildrenTV Rating-GeneralDownloadable RatingInput BlockFor CanadaEnterMoveLOCKLock System            : OffSet PasswordBlock ChannelTV Rating-EnglishTV Rating-FrenchDownloadable RatingInput BlockCloseEnter Password** * *Select LLOOCCKK.1MENUENTERInput the password.21456780923■Enter the password as requested.■The TV is set up with the initial pass-word “0-0-0-0”.SET PASSWORD & LOCK SYSTEM
PARENTAL CONTROL / RATING107Enables or disables the blocking scheme you set up previously.Lock SystemEnterMoveLOCKLock System            : OffSet PasswordBlock ChannelMovie RatingTV Rating-ChildrenTV Rating-GeneralDownloadable RatingInput BlockSelect LLoocckk  SSyysstteemm.Select OOnnor OOffff.43ENTEREnterMoveLOCKLock System            : OnSet PasswordBlock ChannelMovie RatingTV Rating-ChildrenTV Rating-GeneralDownloadable RatingInput BlockOffOn■When you select OOnn, the Lock Systemis enable.Select LLOOCCKK.1MENUENTERInput the password.214567809235RETURNReturn to the previous menu.MENUReturn to TV viewing.
PARENTAL CONTROL / RATING108PARENTAL CONTROL / RATINGSChange the password by inputting a new password twice. Set PasswordEnterMoveLOCKLock System            : OffSet PasswordBlock ChannelMovie RatingTV Rating-ChildrenTV Rating-GeneralDownloadable RatingInput BlockSelect SSeett  ppaasssswwoorrdd.Choose any 4 digits for your new password.As  soon  as  the  4  digits  are  entered,  re-enterthe same 4 digits on the CCoonnffiirrmm.43ENTER1456780923EnterMoveLOCKLock System            : OffSet PasswordBlock ChannelMovie RatingTV Rating-ChildrenTV Rating-GeneralDownloadable RatingInput BlockCloseNew ** * *Confirm * * * *Select LLOOCCKK.1MENUENTERInput the password.214567809235RETURNReturn to the previous menu.MENUReturn to TV viewing.
PARENTAL CONTROL / RATING109CHANNEL BLOCKINGEnterMoveLOCKLock System            : OffSet PasswordBlock ChannelMovie RatingTV Rating-ChildrenTV Rating-GeneralDownloadable RatingInput BlockSelect BBlloocckk  CChhaannnneell.Select a channel to block or unblock.43ENTERBlock or unblock a channel.5ENTERBlocks any channels that you do not want to watch or that you do not want your children to watch. Select LLOOCCKK.1MENUENTERInput the password.214567809236MENUReturn to the previous menu.RETURNReturn to TV viewing.Block/Unblock Move PageCHMove PreviousMENU ExitRETURN
PARENTAL CONTROL / RATING110MOVIE & TV RATINGPARENTAL CONTROL / RATINGSMovie Rating (MPAA)- For USA only Blocks movies according to the movie ratings limits specified, so children cannot view certain movies. You canset the ratings limit by blocking out all the movies with the ratings above a specified level. Keep in mind thatthe movie ratings limit only applies to movies shown on TV, not TV programs, such as soap operas.EnterMoveLOCKLock System            : OffSet PasswordBlock ChannelMovie RatingTV Rating-ChildrenTV Rating-GeneralDownloadable RatingInput BlockSelect MMoovviiee  RRaattiinngg.Select GG, PPGG, PPGG--1133, RR, NNCC--1177,XX, or BBlloocckkiinngg  OOffff.43ENTEREnterMoveLOCKLock System            : OffSet PasswordBlock ChannelMovie RatingTV Rating-ChildrenTV Rating-GeneralDownloadable RatingInput BlockBlocking off : Permits all programsGPGPG-13RNC-17XBlocking Off■G (General audience)   ■PG (Parental guidance suggested)■PG-13 (Parents strongly cautioned)   ■R (Restricted)■NC-17 (No one 17 and under admitted)■X (Adult only)■Blocking Off (Permits all programs)GGIf you set PG-13: G and PG movies willbe available, PG-13, R, NC-17 and X willbe blocked.Select LLOOCCKK.1MENUENTERInput the password.214567809235RETURNReturn to the previous menu.MENUReturn to TV viewing.
PARENTAL CONTROL / RATING111EnterMoveLOCKLock System            : OffSet PasswordBlock ChannelMovie RatingTV Rating-ChildrenTV Rating-GeneralDownloadable RatingInput BlockSelect TTVV  RRaattiinngg--CChhiillddrreenn.Select AAggeeor FFaannttaassyy  VViioolleennccee.43ENTERSelect block options.5ENTEREnterMoveLOCKLock System            : OffSet PasswordBlock ChannelMovie RatingTV Rating-ChildrenTV Rating-GeneralDownloadable RatingInput Block■Age (applies to TV-Y, TV-Y7) ■Fantasy Violence (applies to TV-Y7)TV Rating Children- For USA only Prevents children from watching certain children's TV programs, according to the ratings limit set. The childrenrating does not apply to other TV programs. Unless you block certain TV programs intended for mature audi-ences in the TV Rating - sub menu, your children can view those programs.CloseAgeFantasy ViolenceSelect LLOOCCKK.1MENUENTERInput the password.214567809236RETURNReturn to the previous menu.MENUReturn to TV viewing.
PARENTAL CONTROL / RATING112PARENTAL CONTROL / RATINGSTV Rating General- For USA only Based on the ratings, blocks certain TV programs that you and your family do not want to view.EnterMoveLOCKLock System            : OffSet PasswordBlock ChannelMovie RatingTV Rating-ChildrenTV Rating-GeneralDownloadable RatingInput BlockSelect TTVV  RRaattiinngg--GGeenneerraall.Select  AAggee,  DDiiaalloogguuee,  LLaanngguuaaggee,SSeexxor VViioolleennccee.43ENTERSelect block options.5ENTEREnterMoveLOCKLock System            : OffSet PasswordBlock ChannelMovie RatingTV Rating-ChildrenTV Rating-GeneralDownloadable RatingInput Block■Age  (applies  to  TV-G,TV-PG,TV-14,TV-MA).■Dialogue-sexual  dialogue  (applies  toTV-PG,TV-14).■Language-adult  language  (applies  toTV-PG, TV-14, TV-MA).■Sex-sexual situations (applies to TV-PG,TV-14, TV-MA).■Violence (applies to TV-PG, TV-14, TV-MA).CloseAgeDialogueLanguageSexViolenceSelect LLOOCCKK.1MENUENTERInput the password.214567809236RETURNReturn to the previous menu.MENUReturn to TV viewing.
PARENTAL CONTROL / RATING113TV Rating English- For CANADA only Selecting canadian english language rating system.EnterMoveLOCKLock System            : OffSet PasswordBlock ChannelTV Rating-EnglishTV Rating-FrenchDownloadable RatingInput BlockSelect TTVV  RRaattiinngg--EEnngglliisshh.Select EE, CC, CC88++, GG, PPGG, 1144++,1188++, or BBlloocckkiinngg  OOffff.43ENTEREnterMoveLOCKLock System            : OffSet PasswordBlock ChannelTV Rating-EnglishTV Rating-FrenchDownloadable RatingInput BlockBlocking off : Permits all programsECC8+GPG14+18+Blocking Off■E (Exempt)■C (Children)■C8+ (Children eight years and older) ■G (General programming, suitable forall audiences)■PG (Parental Guidance)■14+ (Viewers 14 years and older)■18+ (Adult programming)■Blocking Off (Permits all programs)Select LLOOCCKK.1MENUENTERInput the password.214567809235RETURNReturn to the previous menu.MENUReturn to TV viewing.
PARENTAL CONTROL / RATING114PARENTAL CONTROL / RATINGSTV Rating French- For CANADA only Selecting canadian french language rating system.EnterMoveLOCKLock System            : OffSet PasswordBlock ChannelTV Rating-EnglishTV Rating-FrenchDownloadable RatingInput BlockSelect TTVV  RRaattiinngg--FFrreenncchh.Select EE, GG, 88aannss++, 1133aannss++,1166aannss++, 1188aannss++, or BBlloocckkiinngg  ooffff.43ENTEREnterMoveLOCKLock System            : OffSet PasswordBlock ChannelTV Rating-EnglishTV Rating-FrenchDownloadable RatingInput BlockBlocking off : Permits all programsEG8ans+13ans+16ans+18ans+Blocking Off■E (Exempt)■G (General)■8ans+ (General-Not convenient for lit-tle children)■13ans+ (Not convenient for children of13 years and younger)■16ans+ (Not convenient for children of16 years and younger)■18ans+  (This  programs  is  only  foradults)■Blocking off (Permits all programs)Select LLOOCCKK.1MENUENTERInput the password.214567809235RETURNReturn to the previous menu.MENUReturn to TV viewing.
PARENTAL CONTROL / RATING115DOWNLOADABLE RATINGThis function may become available in the future and will be available only for digital channels.This function operates only when TV has received Region5 Rating data.EnterMoveLOCKLock System            : OffSet PasswordBlock ChannelMovie RatingTV Rating-ChildrenTV Rating-GeneralDownloadable RatingInput BlockEnterMoveLOCKLock System            : OffSet PasswordBlock ChannelMovie RatingTV Rating-ChildrenTV Rating-GeneralDownloadable RatingInput BlockHumorSportCrueltyLanguageSadnessGenreAgeCloseEESelect DDoowwnnllooaaddaabbllee  RRaattiinngg.Select desired DDoowwnnllooaaddaabblleeRRaattiinngg  option.43ENTERSelect desired option and block it.5ENTERSelect LLOOCCKK.1MENUENTERInput the password.214567809236RETURNReturn to the previous menu.MENUReturn to TV viewing.■Based on rating table, your TV's OSD(On Screen Display) may differ slightlyfrom what is shown in this manual.
PARENTAL CONTROL / RATING116PARENTAL CONTROL / RATINGSEXTERNAL INPUT BLOCKINGEnables you to block an input.Select IInnppuutt  BBlloocckk.Select input source.43Select OOnnor OOffff.5ENTEREnterMoveLOCKLock System            : OffSet PasswordBlock ChannelMovie RatingTV Rating-ChildrenTV Rating-GeneralDownloadable RatingInput BlockSelect LLOOCCKK.1MENUENTERInput the password.214567809236RETURNReturn to the previous menu.MENUReturn to TV viewing.AV1 FF            Off       GGAV2 OffComponent1OffHDMI1 OffRGB-PC OffComponent2OffHDMI2 OffHDMI3 OffCloseAV1 FF            Off       GGAV2 OffComponent1OffHDMI1 OffRGB-PC OffComponent2OffHDMI2 OffHDMI3 OffHDMI4 OffCloseFF            Off       GGAVComponent1OffHDMI1 OffRGB-PC OffComponent2OffHDMI2 OffHDMI3 OffHDMI4 OffClosePlasma TV, 42/47/52LG70,47LG9032/37/42/47/52LG60,42LGX32/37/42LG30,37/42/47/52LG50,32LG70
PARENTAL CONTROL / RATING117KEY LOCKThe TV can be set up so that it can only be used with the remote control. This feature can be used to prevent unauthorized viewing by locking out the front panel controls.This TV is programmed to remember which option it was last set to even if you turn the TV off.Select OOPPTTIIOONN.Select KKeeyy  LLoocckk.EnterMoveOPTIONEnterMoveOPTION1MENU2ENTERLanguage : EnglishInput LabelSIMPLINK : OnKey Lock : OffCaption : OffISM Method : NormalPower Saving : Level 0Set ID : 1Language : EnglishInput LabelSIMPLINK : OnKey Lock : OnCaption : OffISM Method : NormalPower Saving : Level 0Set ID : 1OffOnSelect OOnnor OOffff.3ENTER■In KKeeyy  LLoocckk‘OOnn’, if the TV is turnedoff, press the rr/ I, INPUT, CH ((DDEE  or))button on the TV or POWER,INPUT, CH  or NUMBER buttonson the remote control.■With the KKeeyy  LLoocckk  OOnn, the display‘     KKeeyy  LLoocckk’ appears on the screenif any button on the front panel ispressed while viewing the TV.4RETURNReturn to the previous menu.MENUReturn to TV viewing.E E!
APPENDIX118APPENDIXTROUBLESHOOTINGTThhee  ooppeerraattiioonn  ddooeess  nnoott  wwoorrkk  nnoorrmmaallllyy..TThhee  vviiddeeoo  ffuunnccttiioonn  ddooeess  nnoott  wwoorrkk..No picture &No soundNo or poor coloror poor picturePoor reception on some channelsLines or streaksin picturesNo picture when connecting HDMIHorizontal/vertical barsor picture shakingPicture appears slowly after switching onThe remote controldoesn’t workPower is suddenly turned off■Check to see if there is any object between the product and the remote controlcausing obstruction. Ensure you are pointing the remote control directly at the TV.■Ensure that the batteries are installed with correct polarity (+ to +, - to -).■Ensure that the correct remote operating mode is set: TV, VCR etc.■Install new batteries.■Is the sleep timer set?■Check the power control settings. Power interrupted.■Check whether the product is turned on.■Try another channel. The problem may be with the broadcast.■Is the power cord inserted into wall power outlet?■Check your antenna direction and/or location.■Test the wall power outlet, plug another product’s power cord into the outletwhere the product’s power cord was plugged in.■This is normal, the image is muted during the product startup process. Pleasecontact your service center, if the picture has not appeared after five minutes.■Adjust Color in menu option.■Keep a sufficient distance between the product and the VCR.■Try another channel. The problem may be with the broadcast.■Are the video cables installed properly?■Activate any function to restore the brightness of the picture. ■Check for local interference such as an electrical appliance or power tool.■Station or cable product experiencing problems, tune to another station.■Station signal is weak, reorient antenna to receive weaker station.■Check for sources of possible interference.■Check antenna (Change the direction of the antenna).■Check HDMI cable over version 1.3.The HDMI cables don’t support HDMI version 1.3, it cause flickers or no screendisplay. In this case use the latest cables that support HDMI version 1.3.
APPENDIX119TThheerree  iiss  aa  pprroobblleemm  iinn  PPCC  mmooddee..  ((OOnnllyy  PPCC  mmooddee  aapppplliieedd))■Adjust resolution, horizontal frequency, or vertical frequency.■Check the input source.■Work the Auto configure or adjust clock, phase, or H/V position. (Option)■Check the signal cable.■Reinstall the PC video card.The signal is out of rangeScreen color is unstableor single colorVertical bar or stripe on background &Horizontal Noise &Incorrect positionPicture OK & No soundUnusual sound frominside the productNo sound when connectingHDMI/USBNo output from one of the speakersTThhee  aauuddiioo  ffuunnccttiioonn  ddooeess  nnoott  wwoorrkk..■Press the VOL or VOLUME button.■Sound muted? Press MUTE button.■Try another channel. The problem may be with the broadcast.■Are the audio cables installed properly?■Adjust Balance in menu option.■A change in ambient humidity or temperature may result in an unusual noisewhen the product is turned on or off and does not indicate a fault with theproduct.■Check HDMI cable over version 1.3.■Check USB cable over version 2.0.■Use normal MP3 file.
APPENDIX120APPENDIXMAINTENANCEEarly malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you canenjoy your new TV. Caution: Be sure to turn the power off and unplug the power cord before you begin any cleaning.Cleaning the ScreenHere’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarmwater and a little fabric softener or dish washing detergent. Wring the cloth until it’s almost dry, and thenuse it to wipe the screen.Make sure the excess water is off the screen, and then let it air-dry before you turn on your TV.Cleaning the Cabinet■To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth.■Please be sure not to use a wet cloth.Extended AbsenceGG  If you expect to leave your TV dormant for a long time (such as a vacation), it’s a good idea to unplugthe power cord to protect against possible damage from lightning or power surges.CAUTION21
APPENDIX121PRODUCT SPECIFICATIONS■The specifications shown above may be changed without prior notice for quality improvement.MODELSAC100-240V ~ 50/60HzNTSC-M, ATSC, 64 & 256 QAMVHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV 1-13575 ohm32  ~ 104°F (0 ~40°C)Less than 80%-4 ~ 140°F (-20 ~60°C)Less than 85%Dimensions(Width x Height x Depth)WeightPower requirementTelevision SystemProgram CoverageExternal Antenna ImpedanceEnvironment conditionWith standWithout standWith standWithout standOperating TemperatureOperating HumidityStorage TemperatureStorage Humidity32LG30(32LG30-UA)(32LG30-UD)37LG30(37LG30-UA)(37LG30-UD)42LG30(42LG30-UA)(42LG30-UD)MODELS37LG50(37LG50-UA)(37LG50-UG)42LG50(42LG50-UA)(42LG50-UG)31.5 x 23.7 x 8.9 inches801.8 x 604.2 x 227.3 mm31.5 x 21.4 x 3.1 inches801.8 x 544.1 x 79.0 mm29.5 pounds / 13.4 kg26.2 pounds / 11.9 kg36.2 x 26.8 x 11.5 inches919.6 x 682.3 x 293.8 mm36.2 x 24.0 x 3.5 inches919.6 x 610.3 x 89.0 mm41.4 pounds / 18.8 kg35.7 pounds / 16.2 kg40.6 x 29.2 x 11.5 inches1032.8 x 742.3 x 293.8 mm40.6 x 26.3 x 3.6 inches1032.8 x 670.1 x 92.0 mm52.0 pounds / 23.6 kg46.2 pounds / 21.0 kgDimensions(Width x Height x Depth)WeightWith standWithout standWith standWithout stand36.8 x 26.9 x 11.5 inches936.4 x 685.4 x 293.4 mm36.8 x 24.1 x 3.4 inches936.4 x 612.8 x 88.0 mm40.3 pounds / 18.3 kg34.3 pounds / 15.6 kg40.7 x 28.9 x 11.5 inches1034.0 x 735.0 x 294.0 mm40.7 x 26.1 x 3.5 inches1034.0 x 663.0 x 91.0 mm54.0 pounds / 24.5 kg48.5 pounds / 22.0 kgMODELS47LG50(47LG50-UA)(47LG50-UG)52LG50(52LG50-UA)(52LG50-UG)Dimensions(Width x Height x Depth)WeightWith standWithout standWith standWithout stand45.5 x 32.0 x 13.5 inches1156.2 x 813.1 x 342.9 mm45.5 x 29.1 x 4.0 inches1156.2 x 739.2 x 103.0 mm64.3 pounds / 29.2 kg54.2 pounds / 24.6 kg50.8 x 35.1 x 13.5 inches1291.7 x 892.2 x 342.9 mm50.8 x 32.1 x 4.5 inches1291.7 x 817.0 x 115.3 mm87.0 pounds / 39.5 kg76.9 pounds / 34.9 kg
APPENDIX122APPENDIX■The specifications shown above may be changed without prior notice for quality improvement.MODELSAC100-240V ~ 50/60HzNTSC-M, ATSC, 64 & 256 QAMVHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV 1-13575 ohm32  ~ 104°F (0 ~40°C)Less than 80%-4 ~ 140°F (-20 ~60°C)Less than 85%Dimensions(Width x Height x Depth)WeightPower requirementTelevision SystemProgram CoverageExternal Antenna ImpedanceEnvironment conditionWith standWithout standWith standWithout standOperating TemperatureOperating HumidityStorage TemperatureStorage Humidity32LG60(32LG60-UA)(32LG60-UG)37LG60(37LG60-UA)(37LG60-UG)42LG60(42LG60-UA)(42LG60-UG)MODELS 42LGX(42LG61-UA)52LG60(52LG60-UA)(52LG60-UG)31.7 x 24.6 x 13.1 inches805.6 x 626.0 x 333.0mm31.7 x 23.1 x 3.7 inches805.6 x 587.4 x 96.2 mm31.7 pounds / 14.4 kg26.8 pounds / 12.2 kg36.5 x 27.8 x 14.7 inches929.0 x 706.9 x 374.7 mm36.5 x26.1 x 3.8 inches929.0 x 665.0 x 98.7 mm46.7 pounds / 21.2 kg39.9 pounds / 18.1 kg40.8 x 31.3 x 14.9 inches1037.8 x 796.4 x 379.5 mm40.8 x 29.4 x 3.1 inches1037.8 x 747.0 x 80.8 mm53.1 pounds / 24.1 kg44.9 pounds / 20.4 kgDimensions(Width x Height x Depth)WeightWith standWithout standWith standWithout stand40.8 x 31.4 x 14.8 inches1037.8 x 798.0 x 378.0 mm40.8 x 29.3 x 1.7 inches1037.8 x 746.2 x 45.0 mm46.9 pounds / 21.3 kg39.6 pounds / 18.0 kg47LG60(47LG60-UA)(47LG60-UG)45.3 x 34.1 x 17.1 inches1152.8 x 868.6 x 434.5 mm45.3 x 32.3 x 3.1 inches1152.8 x 820.8 x 79.0 mm71.8 pounds / 32.6 kg59.3 pounds / 26.9 kg50.3 x 37.1 x 16.9 inches1280.1 x 944.7 x 430.0 mm50.3 x 35.2 x 3.5 inches1280.1 x 896.0 x 89.0 mm99.2 pounds / 45.0 kg83.9 pounds / 38.1 kgMODELS32LG70(32LG70-UA)(32LG70-UG)42LG70(42LG70-UA)(42LG70-UG)Dimensions(Width x Height x Depth)WeightWith standWithout standWith standWithout stand31.3 x 23.5 x 8.9 inches797.0 x 597.0 x 227.3 mm31.3 x 21.9 x 3.9 inches797.0 x 558.6 x 100.4 mm29.1 pounds / 13.2 kg25.7 pounds / 11.7 kg40.4 x 28.8 x 11.5 inches1026.2 x 734.0 x 293.4 mm40.4 x 27.0 x 4.4 inches1026.2 x 687.9 x 111.8 mm49.3 pounds / 22.4 kg43.4 pounds / 19.7 kgMODELS47LG70(47LG70-UA)(47LG70-UG)52LG70(52LG70-UA)(52LG70-UG)47LG90(47LG90-UA)Dimensions(Width x Height x Depth)WeightWith standWithout standWith standWithout stand44.8 x 32.2 x 13.5 inches1140.4 x 820.1 x 342.9 mm44.8 x 30.1 x 5.0 inches1140.4 x 764.8 x 129.0 mm66.3 pounds / 30.1 kg55.9 pounds / 25.4 kg50.5 x 35.3 x 13.5 inches1284.4 x 898.6 x 342.9 mm50.5 x 33.2 x 5.0 inches1284.4 x 844.6 x 129.5 mm87.9 pounds / 39.9 kg77.6 pounds / 35.2 kg44.8 x 32.2 x 13.5 inches1140.4 x 820.1 x 342.9 mm44.8 x 30.1 x 5.0 inches1140.4 x 764.8 x 129.0 mm66.5 pounds / 30.2 kg56.2 pounds / 25.5 kg
APPENDIX123■The specifications shown above may be changed without prior notice for quality improvement.MODELSAC100-240V ~ 50/60HzNTSC-M, ATSC, 64 & 256 QAMVHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV 1-13575 ohm32  ~ 104°F (0 ~40°C)Less than 80%-4 ~ 140°F (-20 ~60°C)Less than 85%Dimensions(Width x Height x Depth)WeightPower requirementTelevision SystemProgram CoverageExternal Antenna ImpedanceEnvironment conditionWith standWithout standWith standWithout standOperating TemperatureOperating HumidityStorage TemperatureStorage Humidity42PG25(42PG60-UA)50PG25(50PG60-UA)41.1 x 28.9 x 12.1 inches1044.4 x 735.4 x 308.0 mm41.1 x 26.7 x 3.1 inches1044.4 x 680.6 x 79.6 mm61.7 pounds / 28.0 kg55.1 pounds / 25.0 kg48.6 x 33.4 x 14.3 inches1235.6 x 849.3 x 364.1 mm48.6 x 31.2 x 3.1 inches1235.6 x 792.8 x 79.6 mm96.3 pounds / 43.7 kg87.5 pounds / 39.7 kgMODELS 50PG60 (50PG60F-UA)50PG70 (50PG70F-UB)60PG60 (60PG60F-UA)60PG70 (60PG70F-UB)Dimensions(Width x Height x Depth)WeightWith standWithout standWith standWithout stand48.6 x 33.4 x 14.3 inches1235.6 x 849.3 x 364.1 mm48.6 x 31.2 x 3.1 inches1235.6 x 792.8 x 79.6 mm100.7 pounds / 45.7 kg91.9 pounds / 41.7 kg57.3 x 38.8 x 16.3 inches1455.0 x 985.0 x 414.0 mm57.3 x 36.4 x 3.3 inches1455.0 x 924.8 x 84.1 mm137.5 pounds / 62.4 kg121.0 pounds / 54.9 kg
APPENDIX124PROGRAMMING THE REMOTE CONTROLAPPENDIXThe provided universal remote control can be programmed to operate most remote-controllable devices.Note that the remote may not control all models of other brands.Programming a code into a remote modeTesting your remote control.To find out whether your remote control can operate other components without programming, turn on acomponent such as a STB and press the corresponding mode button (such as a SSTTBB) on the remote con-trol,  while  pointing  at  the  component.  Test  the  PPOOWWEERRand  CCHHbuttons to  see  if  the  componentresponds correctly. If the component does not operate correctly, the remote control requires programmingto operate the device.Turn on the component to be programmed, then press the corresponding mode button (such as SSTTBB) onthe remote control. The remote control button of the desired device is illuminated.Press the MMEENNUUand MMUUTTEEbuttons simultaneously, and the remote control is ready to be programmed withthe code.Enter a code number using the number buttons on the remote control. Programming code numbers for thecorresponding component can be found on the following pages. If the code is correct, the device will turnoff.Press the MMEENNUUbutton to store the code.Test the remote control functions to see if the component responds correctly. If not, repeat from step 2.234561
APPENDIX125Remote Control CodeBrand Codes Brand Codes Brand CodesAIWA 034AKAI 016 043 046 124125 146AMPRO 072ANAM 031 033 103AUDIO DYNAMICS012 023 039 043BROKSONIC 035 037 129CANON 028 031 033CAPEHART 108CRAIG 003 040 135CURTIS MATHES 031 033 041DAEWOO 005 007 010 064065 108 110 111112 116 117 119DAYTRON 108DBX 012 023 039 043DYNATECH 034 053ELECTROHOME 059EMERSON 006 017 025 027029 031 034 035036 037 046 101129 131 138 153FISHER 003 008 009 010FUNAI 034GE 031 033 063 072107 109 14 4 147GO VIDEO 132 136HARMAN KARDON 012 045HITACHI 004 018 026 034043 063 137 150INSTANTREPLAY 031 033JCL 031 033JCPENNY 012 013 015 033040 066 101JENSEN 043JVC 012 031 033 043048 050 055 060130 15 0 152KENWOOD 014 034 039 043047 048LG (GOLDSTAR) 001 012 013 020101 10 6 114 123  LLOYD 034LXI 003 009 013 014017 034 101 106MAGIN 040MAGNAVOX 031 033 034 041067 068MARANTZ 012 031 033 067069MARTA 101MATSUI 027 030MEI 031 033MEMOREX 003 010 014 031033 034 053 072101 102 134 139MGA 045 046 059MINOLTA 013 020MITSUBISHI 013 020 045 046049 051 059 061151MTC 034 040MULTITECH 024 034NEC 012 023 039 043048NORDMENDE 043OPTONICA 053 054PANASONIC 066 070 074 083133 14 0 145PENTAX 013 020 031 033063PHILCO 031 034 067PHILIPS 031 033 034 054067 071 101PILOT 101PIONEER 013 021 048PORTLAND 108PULSAR 072QUARTZ 011 014QUASAR 033 066 075 145RCA 013 020 033 034040 041 062 063107 109 140 144145 147REALISTIC 003 008 010 014031 033 034 040053  054 101RICO 058RUNCO 148SALORA 014SAMSUNG 032 040 102  104105 107 109 112113 115 120 122125SANSUI 022 043 048 135SANYO 003 007 010 014102 134SCOTT 017 037 112  129131SEARS 003 008 009 010013 014 017 020031 042 073 081101SHARP 031 054 149SHINTOM 024SONY 003 009 031 052056 057 058 076077 078 149SOUNDESIGN 034STS 013SYLVANIA 031 033 034  059067SYMPHONIC 034TANDY 010 034TATUNG 039 043TEAC 034 039 043TECHNICS 031 033 070TEKNIKA 019 031 033 034101THOMAS 034TMK 006TOSHIBA 008 013 042 047059 082 112 131TOTEVISION 040 101UNITECH 040VECTOR RESEARCH012VICTOR 048VIDEO CONCEPTS012 034 046VIDEOSONIC 040WARDS 003 013 017 024031 033 034 040053 054 131YAMAHA 012 034 039 043ZENITH 034 048 056058 072 080 101VCR
APPENDIX126APPENDIXBrand Codes Brand Codes Brand CodesALPHASTAR DSR 123AMPLICA 050BIRDVIEW 051 126 129CHANNEL MASTER013 014 015 018036 055CHAPARRAL 008 009 012 077CITOH 054CURTIS MATHES 050 145DRAKE 005 006 007 010  011 052 112 116141DX ANTENNA 024 046 056 076ECHOSTAR 038 040 057 058093 094 095 096097 098 099 100122ELECTRO HOME 089EUROPLUS 114FUJITSU 017 021 022 027133 134GENERAL INSTRUMENT003 004 016 029031 059 101HITACHI 139 140HOUSTON TRACKER033 037 039 051057 104HUGHES 068JANIEL 060 147JERROLD 061KATHREIN 108LEGEND 057LG 001LUTRON 132LUXOR 062 144MACOM 010 059 063 064065MEMOREX 057NEXTWAVE 028 124 125NORSAT 069 070PACE SKY SATELLITE143PANASONIC 060 142PANSAT 121PERSONAL CABLE 117PHILIPS 071PICO 105PRESIDENT 019 102PRIMESTAR 030 110 111PROSAT 072RCA 066 106REALISTIC 043 074SAMSUNG 123SATELLITE SERVICE CO028 035 047 057085SCIENTIFIC ATLANTA032 138SONY 103STARCAST 041SUPER GUIDE 020 124 125TEECOM 023 026 075 087088 090 107 130137TOSHIBA 002 127UNIDEN 016 025 042 043044 045 048 049078 079 080 086101  135  136VIEWSTAR 115WINEGARD 128 146ZENITH 081 082 083 084  091 120HDSTBDVDBrand Codes Brand Codes Brand CodesAPEX DIGITAL 022DENON 020 014GE 005 006HARMAN KARDON 027JVC 012LG 001 010 016 025MAGNAVOX 013MARANTZ 024MITSUBISHI 002NAD 023ONKYO 008 017PANASONIC 003 009PHILIPS 013PIONEER 004 026PROCEED 021PROSCAN 005 006RCA 005 006SAMSUNG 011 015SONY 007THOMPSON 005 006TOSHIBA 019 008YAMAHA 009 018ZENITH 010 016 025
APPENDIX127IR CODES■Configuration of frame 1st frameRepeat frame■Lead code■Repeat code■BBiitt  ddeessccrriippttiioonn■FFrraammee  iinntteerrvvaall::  TTff  The waveform is transmitted as long as a key is depressed.C0 C1 C2 C3 C4 C5 C6 C7 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 D0 D1 D2 D3 D4 D5 D6 D7 Lead code Low custom code High custom code Data code  Data code Repeat  code Tf4.5 ms9 ms 2.25 ms 9 ms 0.55 ms 0.56 ms1.12 ms0.56 ms2.24 msTf TfTf=108ms @455KHzBit ”0”  Bit ”1”1. How to Connect■Connect your wired remote control to the Remote Control port on the TV. 2. Remote Control IR Codes■Output waveform Single pulse, modulated with 37.917KHz signal at 455KHz   T1TcCarrier frequencyFCAR = 1/TC = fOSC/12Duty ratio = T1/TC = 1/3
APPENDIX128APPENDIXCode Function Note(Hexa) Code Function Note(Hexa)08 POWERRemote control Button (Power On/Off)45 Q.MENU Remote control Button43 MENU Remote control Button0B INPUT Remote control Button10-19 Number Key 0-9 Remote control Button4C - (Dash) Remote control Button1A FLASHBK Remote control Button09 MUTE Remote control Button02 VOL + Remote control Button03 VOL - Remote control Button00 CH Remote control Button01 CH Remote control Button1E FAV Remote control Button40 Remote control Button41 Remote control Button07 Remote control Button06 Remote control Button44 ENTER Remote control Button5B RETURN Remote control Button7E SIMPLINK Remote control Button30 AV MODE Remote control ButtonB0 PLAY Remote control ButtonBA PAUSE Remote control ButtonB1 STOP Remote control ButtonBD REC Remote control Button8F REW Remote control Button8E FF Remote control ButtonD6 TV Discrete IR Code (TV Input Selection)C4 POWER ON Discrete IR Code (Only Power On)C5 POWER OFF Discrete IR Code (Only Power Off)5A AV or AV1 Discrete IR Code (AV or AV1 Input Selection)D0 AV2 Discrete IR Code (AV2 Input Selection)BF COMPONENT1 Discrete IR Code (Component1 Input Selection)D4 COMPONENT2 Discrete IR Code (Component2 Input Selection)D5 RGB-PC Discrete IR Code (RGB-PC Input Selection)CE HDMI1 Discrete IR Code (HDMI1 Input Selection)CC HDMI2 Discrete IR Code (HDMI2 Input Selection)E9 HDMI3 Discrete IR Code (HDMI3 Input Selection)DA HDMI4 Discrete IR Code (HDMI4 Input Selection)76 Ratio 4:3 Discrete IR Code (Only 4:3 Mode)77 Ratio 16:9 Discrete IR Code (Only 16:9 Mode)AF Ratio Zoom Discrete IR Code (Only Zoom1 Mode)* Use this feature depending on your model.
APPENDIX129EXTERNAL CONTROL THROUGH RS-232C- Except 32/37/42/47/52LG60, 42LGXRS-232C SetupThe RS-232C port allows you connect the RS-232C input jack to an external control device (such as a computeror an A/V control system) to control the TV’s functions externally.■Note: RS-232C on this unit is intended to be used with third party RS-232C control hardware and software.The instructions below are provided to help with programming software or to test functionality using telenetsoftware.REMOTECONTROL INCABLE INRS-232C IN(CONTROL & SERVICE)ROPTICAL COAXIALDIGITAL AUDIO OUTAUDIO OUTAV IN 1VIDEO L R(MONO)AUDIOS-VIDEOType of Connector; D-Sub 9-Pin MaleNo.  Pin Name1  No connection2 RXD (Receive data)3 TXD (Transmit data)4 DTR (DTE side ready)5 GND6 DSR (DCE side ready)7 RTS (Ready to send)8 CTS (Clear to send)9 No Connection1659PCi.e)Communication Parameters■Baud rate : 9600 bps (UART)■Data length : 8 bits■Parity : None■Stop bit : 1 bit■Communication code : ASCII code■Use a crossed (reverse) cable.NOTE!GGThis  product  has  command  echo  back  in  theRS-232C Command.
APPENDIX130RS-232C ConfigurationsAPPENDIXUse this function to specify a TV ID number. Refer to ‘Real Data Mapping1’. GGpp..113333.Either cable below can be used.Set IDPC TVRXD  2 3 TXDTXD 3 2 RXDGND 5 5 GNDDTR 4 6 DSRDSR 6 4 DTRRTS 7 8 CTSCTS 8 7 RTSD-Sub 9 D-Sub 9PC TVRXD  2 3 TXDTXD 3 2 RXDGND 5 5 GNDDTR 4 6 DTRDSR 6 4 DSRRTS 7 7 RTSCTS 8 8 CTSD-Sub 9 D-Sub 97-Wire Configuration(Serial female-female NULL modem cable)3-Wire Configurations(Not standard)EnterMoveOPTIONEnterMoveOPTIONLanguage : EnglishInput LabelSIMPLINK : OnKey Lock : OffCaption : OffISM MethodPower Saving : Level 0Set ID : 1Language : EnglishInput LabelSIMPLINK : OnKey Lock : OffCaption : OffISM MethodPower Saving : Level 0Set ID : 1EEEESelect OOPPTTIIOONN.Select SSeett  IIDD.Choose the desired TV ID number. The adjustment range of Set ID is1~99.1MENU32ENTERENTERFF                        1GGClose4RETURNReturn to the previous menu.MENUReturn to TV viewing.
APPENDIX131Command Reference ListCCOOMMMMAANNDD11CCOOMMMMAANNDD2221. Channel TuningDATA(Hexadecimal)CCOOMMMMAANNDD11CCOOMMMMAANNDD22DATA(Hexadecimal)CCOOMMMMAANNDD11CCOOMMMMAANNDD22DATA00(Hexadecimal)DATA01(Hexadecimal)DATA02(Hexadecimal)DATA03(Hexadecimal)DATA04(Hexadecimal)DATA05(Hexadecimal)physical   major major low minor high minor low attributeprogram high program lowma01. Power   k  a 00 ~0102. Input Select  x  b (GGp.132)03. Aspect Ratio  k  c (GGp.132)04. Screen Mute  k  d 00 ~0105. Volume Mute  k  e 00 ~0106. Volume Control  k  f 00 ~6407. Contrast  k  g 00 ~6408. Brightness  k  h 00 ~6409. Color  k  i 00 ~6410. Tint  k  j 00 ~6411. Sharpness  k  k 00 ~6412. OSD Select  k  l 00 ~0113. Remote ControlLock ModeTransmission / Receiving  ProtocolTTrraannssmmiissssiioonn[Command 1] : First command to control the set.(j, k, m or x)[Command 2] : Second command to control the set.[Set ID] : You can adjust the set ID to choose desired TV IDnumber in Setup menu. Adjustment range is 1~99.When selecting Set ID ‘0’, every connected the TV iscontrolled. Set ID is indicated as decimal (1~ 99)onmenu and as Hexa decimal (0x0~ 0x63)on transmission/receiving protocol.[DATA] : To transmit the command data.Transmit the ‘FF’ data to read status of command.[Cr] : Carriage ReturnASCII code ‘0x0D’[   ] : ASCII code ‘space (0x20)’* In this model, TV will not send the status during the standby mode.OOKK  AAcckknnoowwlleeddggeemmeennttThe TV transmits ACK (acknowledgement) based on this for-mat when receiving normal  data.  At this time,  if the  data isdata read mode, it indicates present status data. If the data isdata write mode, it returns the data of the PC computer.* In this model, TV will not send the status during the standby mode.* Data Format[Command 2] : Use as command.[Set ID] : Use the small character, if set ID is 10, it will send the ‘0’, ‘a’.[DATA] : Use the small character, if data is 0 x ab, it will send the ‘a’, ‘b’.[OK] : Use the large character.EErrrroorr  AAcckknnoowwlleeddggeemmeennttThe TV transmits ACK (acknowledgement) based on this for-mat when receiving abnormal data from non-viable functionsor communication errors.Data1: Illegal CodeData2: Not supported functionData3: Wait more time* In this model, TV will not send the status during the standby mode.* Data Format[Command 2] : Use as command.[Set ID] : Use the small character, if set ID is 10, it will send the ‘0’, ‘a’.[DATA] : Use the small character, if data is 0 x ab, it will send the ‘a’, ‘b’.[NG] : Use the large character[[CCoommmmaanndd11]][[CCoommmmaanndd22]][[    ]][[SSeett  IIDD]][[    ]][[DDaattaa]][[CCrr]][[CCoommmmaanndd22]][[    ]][[SSeett  IIDD]][[    ]][[OOKK]][[DDaattaa]][[xx]][[CCoommmmaanndd22]][[    ]][[SSeett  IIDD]][[    ]][[NNGG]][[DDaattaa]][[xx]]14. Treble  k  r 00 ~6415. Bass   k  s 00 ~6416. Balance   k  t 00 ~6417.Color Temperaturek  u 00 ~0218. ISM Method j p (GGp.134)19. Power Saving j q 00 ~0120. Auto Configuration j u (GGp.134)22. Channel Add/Del m b 00 ~0123. Key m c (GGp.135)24. Backlight m g 00 ~6400 ~01k  mOnly Plasma TV ModelOnly LCD TV Model
APPENDIX132APPENDIX0011..PPoowweerr  ((CCoommmmaanndd::  kk  aa))To control Power On/Off of the TV.Transmission [k][a][  ][Set ID][  ][Data][Cr]Data 00: Power Off Data 01: Power OnAcknowledgement [a][  ][Set ID][  ][OK/NG][Data][x]* In a like manner, if other functions transmit ‘FF’ databased on this format, Acknowledgement data feedbackpresents status about each function.* Note: In this model, TV will send the Acknowledgeafter power on processing completion.There might be a time delay between command andacknowledge.0022..  IInnppuutt  SSeelleecctt  ((CCoommmmaanndd::  xx  bb))To select input source for TV. Transmission [x][b][  ][Set ID][  ][Data][Cr]Data 00: DTV (Antenna) Data 01: DTV (Cable)Data 10: Analog (Antenna) Data 11: Analog (Cable)Data 20: AV1 Data 21: AV2Data 40: Component 1 Data 41: Component 2Data 60: RGB-PC Data 90: HDMI1Data 91: HDMI2 Data 92: HDMI3Data 93: HDMI4 Acknowledgement [b][  ][Set ID][  ][OK/NG][Data][x]* Use the feature depending on your model.0033..  AAssppeecctt  RRaattiioo  ((CCoommmmaanndd::  kk  cc))To adjust the screen format.Transmission [k][c][  ][Set ID][  ][Data][Cr]Data 01: 4:3 05: Zoom 202: 16:9 06: Set by program04: Zoom 1 09: Just scanReservedAcknowledgement [c][  ][Set ID][  ][OK/NG][Data][x]0044..SSccrreeeenn  MMuuttee  ((CCoommmmaanndd::  kk  dd))To select screen mute on/off.Transmission [k][d][  ][Set ID][  ][Data][Cr]Data 00:  Screen mute off (Picture on)Data 01:  Screen mute on (Picture off)Acknowledgement [d][  ][Set ID][  ][OK/NG][Data][x]0055..  VVoolluummee  MMuuttee  ((CCoommmmaanndd::  kk  ee))To control volume mute on/off.You can also adjust mute using the MUTE button onremote control.Transmission [k][e][  ][Set ID][  ][Data][Cr]Data 00:  Volume mute on (Volume off)Data 01:  Volume mute off (Volume on)Acknowledgement [e][  ][Set ID][  ][OK/NG][Data][x]0066..  VVoolluummee  CCoonnttrrooll  ((CCoommmmaanndd::  kk  ff))To adjust volume.You can also adjust volume with the volume buttons onremote control.Transmission [k][f][  ][Set ID][  ][Data][Cr]Data Min: 00 ~Max: 64 (*transmit by Hexadecimal code)*Refer to ‘Real data mapping’. See page 133.Acknowledgement [f][  ][Set ID][  ][OK/NG][Data][x]0077..  CCoonnttrraasstt  ((CCoommmmaanndd::  kk  gg))To adjust screen contrast. You can also adjust contrast in the PICTURE menu.Transmission [k][g][  ][Set ID][  ][Data][Cr]Data Min: 00 ~Max: 64 (*transmit by Hexadecimal code)*Refer to ‘Real data mapping’. See page 133.Acknowledgement [g][  ][Set ID][  ][OK/NG][Data][x]0088..  BBrriigghhttnneessss  ((CCoommmmaanndd::  kk  hh))To adjust screen brightness.You can also adjust brightness in the PICTURE menu.Transmission [k][h][  ][Set ID][  ][Data][Cr]Data Min: 00 ~Max: 64 (*transmit by Hexadecimal code)*Refer to ‘Real data mapping’. See page 133.Acknowledgement [h][  ][Set ID][  ][OK/NG][Data][x]
APPENDIX1330099..  CCoolloorr  ((CCoommmmaanndd::  kk  ii))To adjust screen color.You can also adjust color in the PICTURE menu.Transmission [k][i][  ][Set ID][  ][Data][Cr]Data Min: 00 ~Max: 64 (*transmit by Hexadecimal code)*Refer to ‘Real data mapping’ as shown below.Acknowledgement [i][  ][Set ID][  ][OK/NG][Data][x]1100..  TTiinntt  ((CCoommmmaanndd::  kk  jj))To adjust screen tint.You can also adjust tint in the PICTURE menu.Transmission [k][j][  ][Set ID][  ][Data][Cr]Data Red: 00 ~Green: 64 (*transmit by Hexadecimal code)*Refer to ‘Real data mapping’ as shown below.Acknowledgement [ j ][  ][Set ID][  ][OK/NG][Data][x]1111..  SShhaarrppnneessss  ((CCoommmmaanndd::  kk  kk))To adjust screen sharpness.You can also adjust sharpness in the PICTURE menu.Transmission [k][k][  ][Set ID][  ][Data][Cr]Data Min: 00 ~Max: 64 (*transmit by Hexadecimal code)*Refer to ‘Real data mapping’ as shown below.Acknowledgement [k][  ][Set ID][  ][OK/NG][Data][x]1122..  OOSSDD  SSeelleecctt  ((CCoommmmaanndd::  kk  ll))To select OSD (On Screen Display) on/off.Transmission [k][l][  ][Set ID][  ][Data][Cr]Data 00: OSD off Data 01: OSD onAcknowledgement [l][  ][Set ID][  ][OK/NG][Data][x]1133..  RReemmoottee  CCoonnttrrooll  LLoocckk  MMooddee  ((CCoommmmaanndd::  kk  mm))To lock the remote control and the  front panel controlson the set.Transmission [k][m][  ][Set ID][  ][Data][Cr]Data 00: Lock off Data 01: Lock onAcknowledgement [m][  ][Set ID][  ][OK/NG][Data][x]If  you’re  not  using  the  remote  control  and  front  panelcontrols on the TV, use this mode. When main  power ison/off, remote control lock is released.1144..  TTrreebbllee  ((CCoommmmaanndd::  kk  rr))To adjust treble. You can also adjust treble in the AUDIO menu.Transmission [k][r][  ][Set ID][  ][Data][Cr]Data Min: 00 ~Max: 64 (*transmit by Hexadecimal code)*Refer to ‘Real data mapping’ as shown.Acknowledgement [r][  ][Set ID][  ][OK/NG][Data][x]1155..BBaassss  ((CCoommmmaanndd::  kk  ss))To adjust bass.You can also adjust bass in the AUDIO menu.Transmission [k][s][  ][Set ID][  ][Data][Cr]Data Min: 00 ~Max: 64 (*transmit by Hexadecimal code)*Refer to ‘Real data mapping’ as shown below.Acknowledgement [s][  ][Set ID][  ][OK/NG][Data][x]1166..  BBaallaannccee  ((CCoommmmaanndd::  kk  tt))To adjust balance.You can also adjust balance in the AUDIO menu.Transmission [k][t][  ][Set ID][  ][Data][Cr]Data Min: 00 ~Max: 64 (*transmit by Hexadecimal code)*Refer to ‘Real data mapping’ as shown below.Acknowledgement [t][  ][Set ID][  ][OK/NG][Data][x]1177..  CCoolloorr  TTeemmppeerraattuurree  ((CCoommmmaanndd::  kk  uu))To adjust color temperature.You can also adjust color temperature in the PICTURE menu.Transmission [k][u][  ][Set ID][  ][Data][Cr]Data 00: Medium   01: Cool   02: Warm  Acknowledgement [u][  ][Set ID][  ][OK/NG][Data][x]*Real data mapping 0 : Step 0A : Step 10 (SET ID 10)F : Step 15 (SET ID 15)10 : Step 16 (SET ID 16)63 : Step 99 (SET ID 99)64 : Step 100
APPENDIX134APPENDIX1188..  IISSMM  MMeetthhoodd  ((CCoommmmaanndd::  jj  pp))(Only Plasma TV model)To avoid having a fixed image remain on screen.Transmission [ j ][p][ ][Set ID][ ][Data][Cr]Data 01: Inversion  02: Orbiter04: White Wash  08: NormalAcknowledgement [p][ ][Set ID][ ][OK/NG][Data][x]1199..  PPoowweerr  ssaavviinngg  ((CCoommmmaanndd::  jj  qq))(Only Plasma TV model)To control the power saving function on/off.Transmission [ j ][q][ ][Set ID][ ][Data][Cr]Data 00: Power saving off (Power Saving Level 0)01: Power saving on (Power Saving Level 4)Acknowledgement [q][ ][Set ID][ ][OK/NG][Data][x]2200..  AAuuttoo  CCoonnffiigguurraattiioonn  ((CCoommmmaanndd::  jj  uu))To  adjust  picture  position  and  minimize  image  shakingautomatically.  Auto  configuration  only  works  in  RGB-PCmode.Transmission [ j ][u][ ][Set ID][ ][Data][Cr]Data 1: To setAcknowledgement [u][ ][Set ID][ ][OK/NG][Data][x]2211..  CChhaannnneell  TTuunniinngg  ((CCoommmmaanndd::  mm  aa))To tune channel to following physical/major/minor number.Transmission [m][a][ ][Set ID][ ][Data00][ ][Data01]  [ ][Data02][ ][Data03][ ][Data04][ ][Data05][Cr]Digital channels have a Physical, Major, and Minor channelnumber. The Physical number is the actual digital channelnumber, the Major is the number that the channel shouldbe mapped  to, and the  Minor  is the  sub-channel.  Sincethe  ATSC  tuner  automatically  maps  the  channel  to  theMajor number, the Physical number is not required whensending a command.Data 00: Physical Channel NumberNTSC air: 02~45, NTSC cable: 01, 0E~7DATSC air: 01~45, ATSC cable: 01~87Data 01 & 02: Major Channel Number Data 01: High byte                    Data 02: Low byteTwo bytes are available for the Major and Minor, nor-mally only the second byte is used. Data 03 & 04: Minor Channel Number Not needed for NTSC.
APPENDIX135Data05:The table above lists the binary code which must beconverted to Hexadecimal before sending. For example:The binary code to tune the sub source to an NTSCcable channel is “1000 0001”, which translates to “81”in Hex.* 7th bit : For which source do you want to change thechannel.* 6th bit: Use a two part or one part channel. Most casesjust use 0 since it’s ignored when using NTSC.* 5th bit: Use 0 with NTSC since it can only use the phys-ical channel number. Normally use 1 for ATSC since mosttimes it doesn’t  matter what the physical number is.* 4th bit: Set to 0.* 3-0 bits: Choose signal type.* Tune Command Examples:1. Tune to the analog (NTSC) cable channel 35.Data  00 = Physical of 35 = 23Data 01 & 02 = No Major = 00 00Data 03 & 04 = No Minor = 00 00Data 05 = 0000 0001 in binary = 01Total = ma 00 23 00 00 00 00 012. Tune to the digital (ATSC) local channel 30-3.Data  00 = Don’t know Physical = 00Data 01 & 02 = Major is 30 = 00 1EData 03 & 04 = Minor is 3 = 00 03Data 05 = 0010 0010 in binary = 22Total = ma 00 00 00 1E 00 03 22Acknowledgement[a][ ][Set ID][ ][OK][Data00][Data01][Data02][Data03][Data04][x][a][ ][Set ID][ ][NG][Data00][x]2222..  CChhaannnneell  AAdddd//DDeell  ((CCoommmmaanndd::  mm  bb))To add and delete the channelsTransmission [m][b][  ][Set ID][  ][Data][Cr]Data 00: Channel Delete Data 01: Channel AddAcknowledgement [b][  ][Set ID][  ][OK/NG][Data][x]2233..  KKeeyy  ((CCoommmmaanndd::  mm  cc))To send IR remote key code.Transmission [m][c][  ][Set ID][  ][Data][Cr]Data Key code: Refer to page 128.Acknowledgement [c][  ][Set ID][  ][OK/NG][Data][x]2244..  BBaacckklliigghhtt  ((CCoommmmaanndd::  mm  gg))(Only LCD TV model)To adjust screen backlight.  Transmission [m][g][  ][Set ID][  ][Data][Cr]Data Min:00 ~ Max:64 (*transmit by Hexadecimal code)*Refer to ‘Real data mapping 1’. See page 133.Acknowledgement [g][  ][Set ID][  ][OK/NG][Data][x]StepNTSC AirNTSC CableATSC AirATSC Cable_std ATSC Cable_hrcATSC Cable_ircATSC cable_autoReserved...Reserved100110011x1200001111x1300000000x14xxxxxxxxxxReserved501UseNo UseUsing PhysicalChannel601TwoOneTwo/One Part Channel701MainSubMain/Sub Picture 001010101x1
APPENDIX136OPEN SOURCE LICENSE - This feature is not available for all  models.APPENDIXCopyright  (C)  1989,  1991  Free  Software  Foundation,  Inc.,  51Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies ofthis license document, but changing it is not allowed.PreambleThe licenses for most  software are designed to take away yourfreedom to share and change it. By contrast, the GNU GeneralPublic  License  is  intended  to guarantee  your  freedom  to  shareand change free software - to make sure the software is free forall its users. This General Public License applies to most of theFree  Software Foundation's  software and  to any other programwhose  authors  commit  to  using  it.  (Some  other  free  softwarefoundation software is covered by the GNU Lesser General PublicLicense instead.) You can apply it to your programs, too.When we speak of free software, we are referring to freedom, notprice. Our General Public Licenses are designed to make sure thatyou have the freedom to distribute copies of free software (andcharge for this service if you wish), that you receive source codeor can get it if you want it, that you can change the software oruse pieces of it in new free programs; and that you know you cando these things.To protect your rights, we need to make restrictions that forbidanyone to deny you these rights or to ask you to surrender therights. These restrictions translate to certain responsibilities foryou if you distribute copies of the software, or if you modify it.For example, if you distribute copies of such a program, whethergratis or for a fee, you must give the recipients all the rights thatyou have. You must make sure that they, too, receive or can getthe source code. And you must show them these terms so theyknow their rights.We protect your rights with two steps: (1) copyright the  soft-ware, and (2) offer you this license which gives you legal permis-sion to copy, distribute and/or modify the software.Also, for each author's protection and ours, we want to make cer-tain that everyone understands that there is no warranty for thisfree software.  If  the  software is  modified  by  someone  else  andpassed on, we want its recipients to know that what they have isnot the original, so that any problems introduced by others willnot reflect on the original authors' reputations.Finally,  any  free  program  is  threatened  constantly  by  softwarepatents. We wish to avoid the danger that redistributors of a freeprogram will individually obtain patent licenses, in effect makingthe program proprietary. To prevent this, we have made it clearthat any patent must be licensed for everyone's free use or notlicensed at all.The precise terms and conditions for copying, distribution andmodification follow.GNU GENERAL PUBLIC LICENSETERMS  AND  CONDITIONS  FOR  COPYING,  DISTRIBUTIONAND MODIFICATION0. This license applies to any program or other work which con-tains a notice placed by the copyright holder saying it may bedistributed under the terms of this General Public License.  The"Program", below, refers to any such program or work, and  a"work based on the Program" means either the Program or anyderivative work under copyright law: that is to say, a work con-taining the Program or a portion of it, either verbatim or withmodifications  and/or  translated  into  another  language.(Hereinafter,  translation  is  included  without  limitation  in  theterm "modification".)  Each licensee is addressed as "you".Activities other  than  copying,  distribution  and  modificationare not  covered  by this  license;  they are outside  its  scope.The act of running the Program is not restricted, and the out-put from the program is covered only if its contents constitutea work based on  the program  (independent  of  having beenmade by running the program). Whether that is true dependson what the program does.1. You may copy and distribute verbatim copies of the program'ssource code as you receive it, in any medium, provided thatyou conspicuously and appropriately publish on each copy anappropriate copyright notice and disclaimer of warranty; keepintact  all  the  notices  that  refer  to  this  license  and  to  theabsence of any warranty; and give any other recipients of theprogram a copy of this license along with the Program.You  may  charge a  fee  for  the  physical  act  of  transferring acopy, and you may at your option offer warranty protection inexchange for a fee.2. You may modify your copy or copies of the program or anyportion of it, thus forming a work based on the Program, andcopy  and  distribute  such  modifications  or  work  under  theterms of section 1 above, provided that you also meet all ofthese conditions:a) You  must  cause  the  modified  files  to  carry  prominentnotices stating that you changed the files and the date ofany change.GNU GENERAL PUBLIC LICENSEVersion 2, June 1991
APPENDIX137b) You  must  cause any work that you distribute  or  publish,that  in  whole  or  in  part  contains  or  is  derived  from  theProgram or any part there of, to be licensed as a whole atno  charge  to  all  third  parties  under  the  terms  of  thislicense.c) If the modified program normally reads commands interac-tively  when  run, you must cause it, when started  runningfor such interactive use in the most ordinary way, to printor  display  an  announcement  including  an  appropriatecopyright notice and a notice that there is no warranty (orelse,  saying  that  you  provide a  warranty)  and  that  usersmay redistribute the program under these conditions, andtelling  the  user  how  to  view  a  copy  of  this  license.(Exception: if the Program itself is interactive but does notnormally print such an announcement, your work based onthe Program is not required to print an announcement.)These requirements apply to the modified work as a whole.  Ifidentifiable  sections  of  that  work  are  not  derived  from  theProgram, and can be reasonably considered independent andseparate works in themselves, then this license, and its terms,do not apply to those sections when you distribute them asseparate works. But when you distribute the same sections aspart of a whole which is a work based on the Program, the dis-tribution of the whole must be on the terms of this license,whose  permissions  for  other  licensees  extend  to  the  entirewhole,  and  thus  to  each  and  every  part  regardless  of  whowrote it.Thus, it is not the intent of this section to claim rights or con-test  your rights  to work written  entirely  by you;  rather,  theintent  is  to exercise the  right  to control the  distribution  ofderivative or collective works based on the program.In addition, mere aggregation of another work not based onthe program with the Program (or with a work based on theprogram)  on  a  volume  of  a  storage  or  distribution  mediumdoes not bring the other work under the scope of this license.3. You may copy and distribute the program (or a work based onit, under section 2) in object code or executable form underthe terms of sections 1 and 2 above provided that you alsodo one of the following:a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under theterms of sections 1 and 2 above on a medium customarilyused for software interchange; or,b) Accompany it with a written offer, valid for at least threeyears, to give any third party, for a charge  no  more thanyour cost  of  physically performing  source  distribution,  acomplete  machine-readable  copy  of  the  correspondingsource code, to be distributed under the terms of sections1 and 2 above on a medium customarily used for softwareinterchange; or,c) Accompany it with the information you received as to theoffer to distribute corresponding source code. (This alter-native is allowed only for noncommercial distribution andonly  if  you  received  the  program  in  object  code  or  exe-cutable form with such an offer, in accord with Subsectionb above.)The source code for a work means the preferred form of thework for making modifications to it.  For an executable work,complete source code means all the source code for all mod-ules it contains, plus any associated interface definition files,plus the scripts used to control compilation and installationof the executable. However, as a special exception, the sourcecode distributed need not include anything that is normallydistributed (in either source or binary form) with the majorcomponents  (compiler,  kernel, and  so  on)  of  the  operatingsystem on which the executable runs, unless that componentitself accompanies the executable.If distribution of executable or object code is made by offer-ing  access  to  copy  from  a  designated  place,  then  offeringequivalent  access  to  copy  the  source  code  from  the  sameplace counts as distribution of the source code, even thoughthird parties are not compelled to copy the source along withthe object code.4. You may not copy, modify, sublicense, or distribute the Programexcept  as  expressly  provided  under  this  license.    Any  attemptotherwise  to  copy,  modify,  sublicense  or  distribute  theProgram is void, and will automatically terminate your rightsunder this license. However, parties who have received copies,or rights, from you under this license will not have their licens-es terminated so  long as such parties remain in full  compli-ance.5. You are not required to accept this license, since you have notsigned  it.  However,  nothing  else  grants  you  permission  tomodify  or  distribute  the  Program  or  its  derivative  works.These actions are prohibited by law if you do not  accept thislicense. Therefore, by modifying or distributing the program(or any work based on the program), you indicate your accep-tance of this license to do so, and all its terms and conditionsfor copying, distributing or modifying the program or worksbased on it.6. Each time you redistribute the program (or any work based onthe  Program),  the  recipient  automatically  receives  a  licensefrom the  original  licensor  to  copy,  distribute  or  modify  theProgram subject to these terms and conditions. You may notimpose any further restrictions on the recipients' exercise ofthe rights granted herein. You are not responsible for enforc-ing compliance by third parties to this license.
APPENDIX138APPENDIX7. If,  as  a  consequence  of  a  court  judgment  or  allegation  ofpatent  infringement or  for any other reason (not limited topatent  issues), conditions  are imposed on  you (whether bycourt order, agreement or otherwise) that contradict the con-ditions of this license, they do not excuse you from the con-ditions of this license. If you cannot distribute so as to satis-fy simultaneously your obligations under this license and anyother pertinent obligations, then as a consequence you maynot  distribute  the  program  at  all.  For  example,  if  a  patentlicense  would  not  permit  royalty-free  redistribution  of  theprogram by all those who receive copies directly or indirectlythrough you, then the only way you could satisfy both it andthis license would be to refrain entirely from distribution ofthe program.If any portion of this section is held invalid or unenforceableunder any particular circumstance, the balance of the sectionis intended to apply and the section as a whole is intended toapply in other circumstances.It is not the purpose of this section to induce you to infringeany patents or other property right claims or to contest valid-ity of  any such  claims;  this section  has the sole  purpose  ofprotecting the integrity of the free software distribution sys-tem, which is implemented by public license practices. Manypeople have made generous contributions to the wide rangeof  software  distributed  through  that  system  in  reliance  onconsistent  application  of  that  system;  it  is  up  to  theauthor/donor  to decide  if  he  or  she  is  willing  to  distributesoftware  through  any  other  system  and  a  licensee  cannotimpose that choice.This  section  is  intended  to  make  thoroughly  clear  what  isbelieved to be a consequence of the rest of this license.8. If the distribution and/or use of the program is restricted incertain countries either  by patents or by copyrighted  inter-faces,  the  original  copyright holder  who  places  the  programunder this license may add an explicit geographical distributionlimitation  excluding  those  countries,  so  that  distribution  ispermitted  only  in  or  among  countries  not  thus  excluded.  Insuch case, this license incorporates the limitation as if writtenin the body of this license.9. The  Free  Software  Foundation  may  publish  revised  and/ornew versions of the General Public License from time to time.Such new versions will be similar in spirit to the present ver-sion, but may differ in detail to address new problems or con-cerns.Each version is given a distinguishing version number.  If theprogram  specifies  a  version  number  of  this  license  whichapplies to it and "any later version", you have the option offollowing the terms and conditions either of that version or ofany later version published by the Free Software Foundation.If  the  program  does  not  specify  a  version  number  of  thislicense,  you may choose  any  version ever  published  by theFree Software Foundation.10.If you wish to incorporate parts of the program into other freeprograms whose distribution conditions are different, write tothe author to ask for permission.  For software which is copy-righted  by  the  Free  Software  Foundation,  write  to  the  FreeSoftware Foundation; we sometimes make exceptions for this.Our decision will be guided by the two goals of preserving thefree status of all derivatives of our free software and of pro-moting the sharing and reuse of software generally.NO WARRANTY11. BECAUSE THE  PROGRAM IS  LICENSED  FREE  OF  CHARGE,THERE  IS  NO  WARRANTY  FOR  THE  PROGRAM,  TO  THEEXTENT  PERMITTED  BY  APPLICABLE  LAW.  EXCEPT  WHENOTHERWISE STATED IN WRITING THE COPYRIGHT HOLD-ERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "ASIS"  WITHOUT  WARRANTY  OF  ANY  KIND,  EITHEREXPRESSED  OR  IMPLIED,  INCLUDING,  BUT  NOT  LIMITEDTO,  THE  IMPLIED  WARRANTIES  OF  MERCHANTABILITYAND FITNESS  FOR A  PARTICULAR  PURPOSE.  THE  ENTIRERISK  AS  TO  THE  QUALITY  AND  PERFORMANCE  OF  THEPROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVEDEFECTIVE, YOU  ASSUME  THE COST OF ALL NECESSARYSERVICING, REPAIR OR CORRECTION.12.IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW ORAGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER,OR  ANY  OTHER  PARTY  WHO  MAY  MODIFY  AND/ORREDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BELIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL,SPECIAL,  INCIDENTAL  OR  CONSEQUENTIAL  DAMAGESARISING OUT OF THE USE OR INABILITY TO USE THE PRO-GRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATAOR DATA BEING RENDERED INACCURATE OR LOSSES SUS-TAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THEPROGRAM  TO  OPERATE  WITH  ANY  OTHER  PROGRAMS),EVEN  IF  SUCH  HOLDER  OR  OTHER  PARTY  HAS  BEENADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
APPENDIX139END OF TERMS AND CONDITIONSHow to apply these terms to your new programsIf you develop a new program, and you want it to be of the great-est possible use to the public, the best way to achieve this is tomake it free software which everyone can redistribute and changeunder these terms.To do so, attach the following notices to the program.  It is safestto attach them to the start of each source file to most effective-ly convey the exclusion of warranty; and each file should have atleast the "copyright" line and a pointer to where the full notice isfound.one line to give the program's name and a brief idea of what itdoes.Copyright (C) <year>  <name of author>This  program  is  free  software;  you  can  redistribute  it  and/ormodify it under the terms of the GNU General Public License aspublished by the Free Software Foundation; either version  2 ofthe license, or (at your option) any later version. This program is distributed in the hope that it will be useful, butWITHOUT ANY WARRANTY; without even the implied warrantyof  MERCHANTABILITY  or  FITNESS  FOR  A  PARTICULAR  PUR-POSE.  See the GNU General Public License for more details.You  should  have  received  a  copy  of  the  GNU  General  PublicLicense along with this program; if not, write to the Free SoftwareFoundation,  Inc.,  51  Franklin  Street,  Fifth  Floor,  Boston,  MA02110-1301 USA.Also add information on how to contact you by electronic andpaper mail.If the program  is interactive, make it output a short notice likethis when it starts in an interactive mode:Gnomovision  version  69,  Copyright  (C)  year  name  of  authorGnomovision  comes  with  ABSOLUTELY  NO  WARRANTY;  fordetails type ‘show w’. This is free software, and you are welcometo  redistribute  it  under  certain  conditions;  type  ‘show  c’  fordetails.The hypothetical commands ‘show w’ and ‘show c’ should showthe appropriate parts of the General Public License. Of course,the  commands  you  use  may  be  called  something  other  than‘show w’ and ‘show c’; they could even be mouse-clicks or menuitems-whatever suits your program.You should also get your employer (if you work as a programmer)or your school, if any, to sign a “copyright disclaimer” for the pro-gram, if necessary.  Here is a sample; alter the names:Yoyodyne, Inc., hereby disclaims all copyright interest in the pro-gram ‘Gnomovision’ (which makes passes at compilers) written byJames Hacker.signature of Ty Coon, 1 April 1989Ty Coon, President of ViceThis General Public License does not permit incorporating yourprogram into proprietary programs. If your program is a subrou-tine library, you may consider it more useful to permit linking pro-prietary applications with the library. If this is what you want todo,  use  the  GNU  Lesser General  Public  License  instead  of  thislicense.
APPENDIX140APPENDIXCopyright  (C)  1991,  1999  Free  Software  Foundation,  Inc.    51Franklin  Street,  Fifth  Floor,  Boston,  MA    02110-1301    USAEveryone is permitted to copy and distribute verbatim copies  ofthis license document, but changing it is not allowed.[This  is  the  first  released  version  of  the  Lesser  GPL.    It  alsocounts  as the successor of the GNU Library Public License, ver-sion 2, hence  the version number 2.1.]PreambleThe licenses for most  software are designed  to take away yourfreedom to share and change it. By contrast, the GNU GeneralPublic Licenses are intended to guarantee your freedom to shareand change free software - to make sure the software is free forall its users.This license, the Lesser General Public License, applies to somespecially designated  software  packages  -  typically  libraries  -  ofthe Free Software Foundation and other authors who decide touse it. You can use it too, but we suggest you first think careful-ly  about  whether  this  license  or  the  ordinary  General  PublicLicense is the better strategy to use in any particular case, basedon the explanations below.When we speak of free software, we are referring to freedom ofuse, not price. Our General Public Licenses are designed to makesure that you have the freedom to distribute copies of free soft-ware (and charge for  this  service if you wish);  that you receivesource code or can get it if you want it; that you can change thesoftware and use pieces of it in new free programs; and that youare informed that you can do these things.To protect your rights, we need to make restrictions that forbiddistributors to deny you these rights or to ask you to surrenderthese rights. These restrictions translate to certain responsibilitiesfor you if you distribute copies of the library or if you modify it.For example, if you distribute copies of the library, whether gratisor for a fee, you must give the recipients all the rights that wegave you. You must make sure that they, too, receive or can getthe source code. If you link other code with the library, you mustprovide complete object files to the recipients, so that they canrelink them with the library after making  changes to the libraryand recompiling it. And you must show them these terms so theyknow their rights.We protect your rights with a two-step method: (1) we copyrightthe library, and (2) we offer you this license, which gives you legalpermission to copy, distribute and/or modify the library.To protect each distributor,  we want to  make it  very clear  thatthere is no warranty for the free library. Also, if the library is mod-ified by someone else and passed on, the recipients should knowthat what they have is not the original version, so that the origi-nal  author's  reputation  will  not  be  affected  by  problems  thatmight be introduced by others.Finally, software patents pose a constant threat to the existenceof any free program.  We wish to make sure that a company can-not effectively restrict the users of a free program by obtaining arestrictive license from a patent holder. Therefore, we insist thatany patent license obtained for a version of the library must beconsistent with the full freedom of use specified in this license.Most GNU software, including some libraries, is covered by theordinary  GNU  General  Public  License.  This  license,  the  GNULesser  General  Public  License,  applies  to  certain  designatedlibraries, and is quite different from the ordinary General PublicLicense. We use this license for certain libraries in order to per-mit linking those libraries into non-free programs.When  a  program  is  linked  with  a  library,  whether  statically  orusing  a  shared  library,  the  combination  of  the  two  is  legallyspeaking a combined work, a derivative of the original library. Theordinary  General  Public  License  therefore  permits  such  linkingonly  if  the  entire  combination  fits  its  criteria  of  freedom.  TheLesser General Public License permits more lax criteria for linkingother code with the library.We call this license the "Lesser" General Public License becauseit  does  Less  to  protect  the  user's  freedom  than  the  ordinaryGeneral Public License. It also provides other free software devel-opers Less of an advantage over competing non-free programs.These disadvantages are the reason we use the ordinary GeneralPublic License for many libraries. However, the Lesser license pro-vides advantages in certain special circumstances.For example, on rare occasions, there may be a special need toencourage the widest possible use of a certain library, so that itbecomes a de-facto standard. To achieve this, non-free programsmust be allowed to use the library. A more frequent case is thata free library does the same job as widely used non-free libraries.In this case, there is little to gain by limiting the free library to freesoftware only, so we use the Lesser General Public License.In other cases, permission to use a particular library in non-freeprograms enables a greater number of people to use a large bodyof  free  software.  For  example,  permission  to  use  the  GNU  CLibrary in non-free programs enables many more people to usethe  whole  GNU  operating  system,  as  well  as  its  variant,  theGNU/Linux operating system.GNU LESSER GENERAL PUBLIC LICENSEVersion 2.1, February 1999
APPENDIX141Although the Lesser General Public License is Less protective ofthe users' freedom, it does ensure that the user of a program thatis linked with the Library has the freedom and the wherewithal torun that program using a modified version of the Library.The precise terms and conditions for copying, distribution andmodification follow. Pay close attention to the difference betweena "work based on the library" and a "work that uses the library".The former contains code derived from the library, whereas thelatter must be combined with the library in order to run.GNU LESSER GENERAL PUBLIC LICENSETERMS  AND  CONDITIONS  FOR  COPYING,  DISTRIBUTIONAND MODIFICATION0. This license agreement applies to any software library or otherprogram which contains a notice placed by the copyright hold-er  or  other  authorized  party  saying  it  may  be  distributedunder  the  terms  of  this  Lesser General Public  License  (alsocalled “this license”). Each license is addressed as "you".A  “library”  means  a  collection  of software  functions  and/ordata prepared so as to be conveniently linked with applicationprograms  (which  use  some  of  those  functions  and  data)  toform executables.The “Library”, below, refers to any such software library or workwhich has been distributed under these terms. A “work basedon the Library” means either the Library or any derivative workunder  copyright  law:  that  is  to  say,  a  work  containing  thelibrary or a portion of it, either verbatim or with modificationsand/or  translated  straightforwardly  into  another  language.(Hereinafter,  translation  is  included  without  limitation  in  theterm “modification”.)“Source code”  for  a  work  means  the  preferred  form  of  thework  for  making  modifications  to  it.  For  a  library,  completesource code means all the source code for all modules it con-tains, plus  any associated  interface  definition  files, plus  thescripts  used  to  control  compilation  and  installation  of  thelibrary.Activities other  than  copying,  distribution  and  modificationare not  covered by this  license;  they are  outside  its  scope.The act of running a program using the Library is not restrict-ed, and output from such a program is covered only if its con-tents constitute a work based on the library (independent ofthe use of the Library in a tool for writing it). Whether that istrue depends on what the library does and what the programthat uses the library does.1. You may copy and distribute verbatim copies of the library'scomplete source code as you receive it, in any medium, pro-vided  that  you  conspicuously  and  appropriately  publish  oneach copy an appropriate copyright notice and disclaimer ofwarranty; keep intact all the notices that refer to this licenseand to the absence of any warranty; and distribute a copy ofthis license along with the Library.You  may  charge a  fee  for  the  physical  act  of  transferring acopy, and you may at your option offer warranty protection inexchange for a fee.2. You  may  modify  your  copy  or  copies  of  the  Library  or  anyportion of it, thus forming a work based on the Library, andcopy  and  distribute  such  modifications  or  work  under  theterms of section 1 above, provided that you also meet all ofthese conditions:a) The modified work must itself be a software library.b) You  must  cause  the  files  modified  to  carry  prominentnotices stating that you changed the files and the date ofany change.c) You must cause the whole of the work to be licensed at nocharge to all third parties under the terms of this license.d) If a facility in the modified Library refers to a function or atable of data to be supplied by an application program thatuses the facility, other than as an argument passed whenthe  facility  is  invoked,  then  you  must  make  a  good faitheffort to ensure that, in the event an application does notsupply such function or table, the facility still operates, andperforms whatever part of its purpose remains meaningful.(For  example,  a function in a  library to compute  square rootshas a purpose that is entirely well-defined independent of theapplication.  Therefore, Subsection 2d requires that any appli-cation-supplied function or table used by this function must beoptional: if the application does not supply it, the square rootfunction must still compute square roots.)These requirements apply to the modified work as a whole.  Ifidentifiable  sections  of  that  work  are  not  derived  from  thelibrary,  and can  be  reasonably  considered  independent  andseparate works in themselves, then this license, and its terms,do not apply to those sections when you distribute them asseparate works.  But when you distribute the same sections aspart of a whole which is a work based on the library, the dis-tribution of the whole must be on the terms of this license,whose  permissions  for  other  licenses  extend  to  the  entirewhole,  and  thus  to  each  and  every  part  regardless  of  whowrote it.Thus, it is not the intent of this section to claim rights or con-test  your  rights  to work  written entirely by you;  rather,  theintent  is  to exercise the  right  to control the  distribution  ofderivative or collective works based on the library.In addition, mere aggregation of another work not based onthe  library  with  the  library  (or  with  a  work  based  on  thelibrary) on a volume of a storage or distribution medium doesnot bring the other work under the scope of this license.
APPENDIX142APPENDIX3. You may opt to apply the terms of the ordinary GNU GeneralPublic License instead of this License to a given copy of theLibrary.  To do this, you must alter all the notices that refer tothis License, so that they refer to the ordinary GNU GeneralPublic License, version 2, instead of to this License. (If a newerversion  than  version  2  of  the  ordinary GNU  General  PublicLicense  has  appeared,  then  you  can  specify  that  versioninstead if you wish.) Do not make any other change in thesenotices.Once this change is made in a given copy, it is irreversible forthat copy, so the ordinary GNU General Public License appliesto all subsequent copies and derivative works made from thatcopy.This option is useful when you wish to copy part of the codeof the library into a program that is not a library.4. You may copy and distribute the library (or a portion or deriv-ative of it, under Section 2) in object code or executable formunder the terms of Sections 1 and 2 above provided that youaccompany  it  with  the  complete  corresponding  machine-readable source code,  which  must  be  distributed under  theterms  of sections  1  and  2 above  on  a  medium  customarilyused for software interchange.If distribution  of object  code  is made  by offering  access  tocopy from a designated place, then offering equivalent accessto  copy  the  source code  from  the  same  place  satisfies  therequirement to distribute the source code, even though thirdparties are not compelled to copy the source along with theobject code.5. A program that contains no derivative of any portion of theLibrary,  but  is  designed  to  work  with  the  Library  by  beingcompiled  or  linked  with  it,  is  called  a  “work  that  uses  theLibrary”. Such a work, in isolation, is not a derivative work ofthe  Library,  and  therefore  falls  outside  the  scope  of  thislicense.However, linking a “work that uses the library” with the Librarycreates  an  executable  that  is  a  derivative  of  the  Library(because  it  contains  portions  of  the  library),  rather  than  a“work that uses the library”. The executable is therefore cov-ered by this license. Section 6 states terms for distribution ofsuch executable.When a “work that uses the library” uses material from a head-er file that is part of the library, the object code for the workmay be a derivative work of the library even though the sourcecode is not.Whether this is true is especially significant if the work can belinked without the library, or if the work is itself a library. Thethreshold for this to be true is not precisely defined by law.If  such  an  object  file  uses  only  numerical  parameters,  datastructure layouts and accessories, and small macros and smallinline functions (ten lines or less in length), then the use ofthe object file is unrestricted, regardless of whether it is legal-ly a derivative work.  (Executable containing this object codeplus portions of the library will still fall under Section 6.)Otherwise, if the work is a derivative of the library, you maydistribute  the  object  code  for  the  work under the  terms ofSection 6. Any executable containing that work also fall underSection  6,  whether or  not  they  are  linked directly  with  thelibrary itself.6. As an exception to the sections above, you may also combineor link a "work that uses the library" with the library to pro-duce a work containing portions of the library, and distributethat work under terms of your choice, provided that the termspermit modification of the work for the customer's own useand reverse engineering for debugging such modifications.You must give prominent notice with each copy of the workthat the library is used in it and that the Library and its useare covered by this license. You must supply a  copy of thislicense.  If  the  work  during  execution  displays  copyrightnotices, you must include the copyright notice for the libraryamong them, as well as a reference directing the user to thecopy of this license. Also, you must do one of these things:a) Accompany  the  work  with  the  complete  correspondingmachine-readable  source  code  for  the  library  includingwhatever  changes  were  used  in  the  work (which  must bedistributed under Sections 1 and 2 above); and, if the workis an executable linked with the Library, with the completemachine-readable “work  that  uses  the  Library”,  as  objectcode and/or source code, so that the user can modify thelibrary  and  then  relink  to  produce  a  modified  executablecontaining the modified library.  (It is understood that theuser who  changes the  contents of  definitions files  in  thelibrary will not necessarily be able to recompile the appli-cation to use the modified definitions.)b) Use a suitable shared library mechanism for linking with thelibrary. A suitable mechanism is one that (1) uses at run timea copy of the library already present on the user’s computersystem,  rather than  copying  library functions  into the  exe-cutable, and (2) will operate properly with a modified versionof the library, if the user installs one, as long as the modifiedversion  is  interface-compatible  with  the  version  that  thework was made with.c) Accompany the work with a written offer, valid for at leastthree years, to give the same user the materials specified inSubsection 6, above, for a charge no more than the cost ofperforming this distribution.d) If  distribution  of  the work is  made  by offering  access tocopy  from a designated  place,  offer  equivalent access  tocopy the above specified materials from the same place.e) Verify that the user has already received a copy of thesematerials or that you have already sent this user a copy.
APPENDIX143For  an  executable, the required  form  of the "work that usesthe library" must include any data and utility programs need-ed for reproducing the executable from it.  However, as a spe-cial  exception,  the  materials  to  be  distributed  need  notinclude anything that is normally distributed (in either sourceor binary form) with the major components (compiler, kernel,and so on) of the operating system on which the executableruns,  unless  that  component  itself  accompanies  the  exe-cutable.It may  happen  that this requirement  contradicts  the licenserestrictions of other proprietary libraries that do not normal-ly  accompany  the  operating  system.    Such  a  contradictionmeans you cannot use both them and the library together inan executable that you distribute.7. You may place library facilities that are a work based on thelibrary  side-by-side  in  a  single  library  together  with  otherlibrary  facilities  not  covered  by  this  license,  and  distributesuch a combined library, provided that the separate distribu-tion of the work based on the Library and of the other libraryfacilities  is  otherwise  permitted,  and  provided  that  you  dothese two things:a) Accompany the combined library with a copy of the samework  based  on  the  Library,  uncombined  with  any  otherlibrary facilities. This must be distributed under the termsof the sections above.b) Give  prominent  notice  with  the  combined  library  of  thefact  that  part  of  it  is  a  work  based  on  the  library,  andexplaining  where  to  find  the  accompanying  uncombinedform of the same work.8. You may not copy, modify, sublicense, link with, or distributethe  library  except  as  expressly  provided  under  this  license.Any attempt otherwise to copy, modify, sublicense, link with,or distribute the library is void, and will automatically termi-nate your rights under this license.  However, parties who havereceived copies, or rights, from you under this license will nothave their licenses terminated so long as such parties remainin full compliance.9. You are not required to accept this license, since you have notsigned it. However, nothing else grants you permission to mod-ify  or  distribute  the  library  or  its  derivative  works.    Theseactions are prohibited by law if you do not accept this license.Therefore, by modifying or distributing the library (or any workbased  on  the  library),  you  indicate  your  acceptance  of  thislicense to do so, and all its terms and conditions for copying,distributing or modifying the library or works based on it. 10.Each time you redistribute the library (or any work based onthe  Library),  the  recipient  automatically  receives  a  licensefrom the original licensor to copy, distribute, link with or mod-ify the library subject to these terms and conditions.  You maynot impose any further restrictions on the recipients' exerciseof the rights granted herein.You  are  not  responsible  for  enforcing  compliance  by  thirdparties with this license.11. If,  as  a  consequence  of  a  court  judgment  or  allegation  ofpatent  infringement or  for any other reason (not limited  topatent  issues), conditions  are imposed on  you (whether bycourt order, agreement or otherwise) that contradict the con-ditions of this license, they do not excuse you from the con-ditions of this license. If you cannot distribute so as to satis-fy simultaneously your obligations under this license and anyother pertinent obligations, then as a consequence you maynot distribute the library at all. For example, if a patent licensewould not permit royalty-free redistribution of the library byall  those  who  receive  copies  directly  or  indirectly  throughyou,  then  the  only  way  you  could  satisfy  both  it  and  thislicense  would  be  to refrain  entirely  from distribution  of  thelibrary.If any portion of this section is held invalid or unenforceableunder any particular circumstance, the balance of the sectionis intended to apply, and the section as a whole is intended toapply in other circumstances.It is not the purpose of this section to induce you to infringeany patents or other property right claims or to contest valid-ity of  any such  claims;  this section  has the sole  purpose  ofprotecting the integrity of the free software distribution sys-tem  which is implemented by public license practices. Manypeople have made generous contributions to the wide rangeof  software  distributed  through  that  system  in  reliance  onconsistent  application  of  that  system;  it  is  up  to  theauthor/donor  to decide  if  he  or  she  is  willing  to  distributesoftware  through  any  other  system  and  a  license  cannotimpose that choice.This  section  is  intended  to  make  thoroughly  clear  what  isbelieved to be a consequence of the rest of this license.12.If the distribution and/or use of the library is restricted in cer-tain countries either by patents or by copyrighted interfaces,the original copyright holder who places the library under thislicense may add an explicit geographical distribution limitationexcluding  those  countries,  so  that  distribution  is  permittedonly in  or among  countries not thus  excluded. In  such  case,this license incorporates the limitation as if written in the bodyof this license.13.The  Free  Software  Foundation  may  publish  revised  and/ornew versions of the Lesser General Public License from time totime. Such new versions will be similar in spirit to the presentversion, but may differ in detail to address new problems orconcerns.Each version is given a distinguishing version number.  If thelibrary specifies a version number of this license which appliesto it and “any later version”, you have the option of followingthe terms and conditions either of that version or of any laterversion published by the Free Software Foundation.
APPENDIX144APPENDIXIf the library does not specify a license version number, youmay choose any version ever published by the Free SoftwareFoundation.14.If you wish to incorporate parts of the library into other freeprograms whose distribution conditions are incompatible withthese, write to the author to ask for permission.  For softwarewhich is copyrighted by the Free Software Foundation, writeto the Free Software Foundation; we sometimes make excep-tions for this.  Our decision will be guided by the two goals ofpreserving the free status of all derivatives of our free softwareand of promoting the sharing and reuse of software generally.NO WARRANTY15.BECAUSE  THE  LIBRARY  IS  LICENSED  FREE  OF  CHARGE,THERE  IS  NO  WARRANTY  FOR  THE  LIBRARY,  TO  THEEXTENT  PERMITTED  BY  APPLICABLE  LAW.  EXCEPT  WHENOTHERWISE STATED IN WRITING THE COPYRIGHT HOLD-ERS AND/OR  OTHER  PARTIES  PROVIDE  THE  LIBRARY  "ASIS"  WITHOUT  WARRANTY  OF  ANY  KIND,  EITHEREXPRESSED  OR  IMPLIED,  INCLUDING,  BUT  NOT  LIMITEDTO,  THE  IMPLIED  WARRANTIES  OF  MERCHANTABILITYAND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRERISK  AS  TO  THE  QUALITY  AND  PERFORMANCE  OF  THELIBRARY  IS  WITH  YOU.    SHOULD  THE  LIBRARY  PROVEDEFECTIVE, YOU  ASSUME  THE COST OF ALL NECESSARYSERVICING, REPAIR OR CORRECTION.16.IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW ORAGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER,OR  ANY  OTHER  PARTY  WHO  MAY  MODIFY  AND/ORREDISTRIBUTE  THE  LIBRARY  AS  PERMITTED  ABOVE,  BELIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL,SPECIAL,  INCIDENTAL  OR  CONSEQUENTIAL  DAMAGESARISING  OUT  OF  THE  USE  OR  INABILITY  TO  USE  THELIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATAOR DATA BEING RENDERED INACCURATE OR LOSSES SUS-TAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THELIBRARY  TO  OPERATE  WITH  ANY  OTHER  SOFTWARE),EVEN  IF  SUCH  HOLDER  OR  OTHER  PARTY  HAS  BEENADVISED OF THE POSSIBILITY OF SUCH DAMAGES.END OF TERMS AND CONDITIONSHow to apply these terms to your new librariesIf you develop a new library, and you want it to be of the great-est possible use to the public, we recommend making it free soft-ware that everyone can redistribute and change. You can do soby permitting redistribution under these terms (or, alternatively,under the terms of the ordinary General Public License).To apply these terms, attach the following notices to the library.It is safest to attach them to the start of each source file to mosteffectively convey the exclusion of warranty; and each file shouldhave at least the “copyright” line and a pointer to where the fullnotice is found.one line to give the library's name and a brief idea of what it does.Copyright (C) <year>  <name of author>This library is free software; you can redistribute it and/or modifyit under the terms of the GNU Lesser General Public License aspublished by the Free Software Foundation; either version 2.1 ofthe license, or (at your option) any later version.This library is distributed in the hope that it will be useful, butWITHOUT ANY WARRANTY; without even the implied warrantyof  MERCHANTABILITY  or  FITNESS  FOR  A  PARTICULAR  PUR-POSE.  See  the  GNU  Lesser  General  Public  License  for  moredetails.You  should  have  received  a  copy  of  the  GNU  Lesser  GeneralPublic  License  along  with  this  library;  if  not,  write  to  the  FreeSoftware Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,MA  02110-1301  USA Also add information on how to contact you by electronic andpaper mail.You should also get your employer (if you work as a programmer)or  your school,  if  any,  to sign  a  “copyright  disclaimer”  for  thelibrary, if necessary. Here is a sample; alter the names:Yoyodyne,  Inc.,  hereby  disclaims  all  copyright  interest  in  thelibrary  ‘Frob’  (a  library  for  tweaking  knobs)  written  by  JamesRandom Hacker.signature of Ty Coon, 1 April 1990Ty Coon, President of Vice
APPENDIX1451.Definitions.1.0.1. “Commercial use” means distribution or otherwise makingthe covered code available to a third party.1.1. “Contributor”  means  each  entity  that  creates  or  con-tributes to the creation of modifications.1.2. “Contributor version” means the combination of the orig-inal code, prior modifications used by a contributor, andthe modifications made by that particular contributor.1.3. “Covered code” means the original code or modificationsor the combination of the original code and modifications,in each case including portions thereof.1.4. “Electronic  distribution  mechanism”  means  a  mechanismgenerally accepted in the software development communi-ty for the electronic transfer of data.1.5. “Executable” means covered code in any form other thansource code.1.6. “Initial developer” means the individual or entity identifiedas the initial Developer in the Source Code notice requiredby exhibit A.1.7. “Larger work” means a work which combines covered codeor portions thereof with code not governed by the termsof this License.1.8. “License” means this document.1.8.1. “Licensable” means having the right to grant, to the maxi-mum  extent  possible,  whether  at  the  time  of  the  initialgrant or subsequently acquired, any and all of the rightsconveyed herein.1.9. “Modifications”  means  any  addition  to  or  deletion  fromthe substance or structure of either the original code orany  previous  modifications.  When  covered  code  isreleased as a series of files, a modification is:A. Any addition to or deletion from the contents of a filecontaining original code or previous modifications.B. Any new file that contains any part of the original codeor previous modifications.1.10. “Original code” means source code of computer softwarecode  which  is  described  in  the  source  code  noticerequired by exhibit as original code, and which, at the timeof  its  release  under  this  license  is  not  already  coveredcode governed by this license.1.10.1.“Patent claims” means any patent claim(s), now owned orhereafter  acquired,  including  without  limitation,  method,process, and apparatus claims, in any patent licensable bygrantor.1.11. “Source code”  means  the  preferred  form  of  the  coveredcode for making modifications to it, including all modulesit  contains,  plus  any associated  interface  definition  files,scripts used to control compilation and installation of anexecutable,  or  source  code  differential  comparisonsagainst  either  the  original  code  or  another  well  known,available  covered  code  of  the  contributor's  choice.  Thesource code can be in a compressed or archival form, pro-vided the appropriate decompression or de-archiving soft-ware is widely available for no charge.1.12. “You”  (or  “Your”)  means  an  individual  or  a  legal  entityexercising rights under, and complying with all of the termsof, this  license  or  a  future  version  of  this  license  issuedunder section 6.1.For legal entities, “You” includes any entity which controls,is controlled by, or is under common control with You. Forpurposes of this definition, “control” means (a) the power,direct or indirect, to cause the direction or management ofsuch entity, whether by contract or otherwise, or (b) own-ership of more than fifty percent (50%) of the outstand-ing shares or beneficial ownership of such entity.2. Source Code License.2.1. The initial developer grant.The initial developer hereby grants You a world-wide, roy-alty-free, non-exclusive license, subject to third party intel-lectual property claims:a) under intellectual property rights (other than patent ortrademark) licensable by initial developer to use, repro-duce, modify, display, perform, sublicense and distrib-ute the original code (or portions thereof) with or with-out modifications, and/or as part of a larger work; and(b) under patents claims infringed by the making, using orselling of original code, to make, have made, use, prac-tice, sell, and offer for sale, and/or otherwise disposeof the original code (or portions there of).MOZILLA PUBLIC LICENSEVersion 1.1---------------
APPENDIX146APPENDIX(c) the licenses granted in this section 2.1(a) and (b) areeffective on the date Initial developer first distributesoriginal code under the terms of this license.(d) Notwithstanding  section  2.1(b)  above,  no  patentlicense is granted: 1) for code that You delete from theoriginal Code; 2) separate from the original code;  or3) for infringements caused by: i) the modification ofthe original code or ii) the combination of the originalcode with other software or devices.2.2. Contributor Grant.Subject  to  third  party  intellectual  property  claims,  eachcontributor hereby grants You a world-wide, royalty-free,non-exclusive license(a) under  intellectual property  rights (other than  patentor  trademark)  licensable  by  contributor,  to  use,reproduce,  modify,  display,  perform,  sublicense  anddistribute the modifications created by such contribu-tor  (or  portions  thereof)  either  on  an  unmodifiedbasis,  with  other  modifications,  as  covered  codeand/or as part of a larger work; and(b) under patent claims infringed by the making, using, orselling  of    modifications  made  by  that  contributoreither alone and/or in combination with its contributorversion  (or  portions  of  such  combination),  to  make,use,  sell,  offer  for  sale,  have  made,  and/or  otherwisedispose of: 1) modifications made by that contributor(or portions thereof); and 2) the combination of mod-ifications made by that contributor with its contributorversion (or portions of such combination).(c) the licenses granted in sections 2.2(a) and 2.2(b) areeffective on the date contributor first makes commer-cial use of the covered code.(d) Notwithstanding  section  2.2(b)  above,  no  patentlicense is granted: 1) for any code that contributor hasdeleted from the contributor version; 2) separate fromthe  contributor  version;  3)  for  infringements  causedby: i) third party modifications of contributor versionor ii)  the combination of modifications made by thatcontributor with other software (except as part of thecontributor  version)  or  other  devices;  or  4)  underpatent  claims  infringed  by  covered  code  in  theabsence of modifications made by that contributor.3. Distribution Obligations.3.1. Application of license.The modifications which You create or to which you con-tribute are governed by the terms of this license, includingwithout limitation section 2.2. The source code version ofcovered code may be distributed only under the terms ofthis  license  or  a  future  version  of  this  license  releasedunder  section  6.1,  and  you must  include  a  copy of  thislicense with every copy of the source code you distribute.You may not offer or impose any terms on any source codeversion  that  alters  or  restricts  the  applicable  version  ofthis  license  or  the  recipients' rights  hereunder.  However,you  may  include  an  additional  document  offering  theadditional rights described in section 3.5.3.2. Availability of source code.Any modification which you create or to  which you con-tribute must be  made available in source code form underthe terms of this license either on the same media as anexecutable version or via an accepted electronic distribu-tion  mechanism  to  anyone  to  whom  you  made  an  exe-cutable  version  available;  and  if  made  available  via  elec-tronic distribution mechanism, must remain available for atleast twelve (12) months after the date it initially becameavailable,  or  at  least  six  (6)  months  after  a  subsequentversion  of  that  particular  modification  has  been  madeavailable to such recipients. You are responsible for ensur-ing that the source code version remains available even ifthe electronic distribution mechanism is maintained by athird party.3.3. Description of modifications.You must cause all covered code to which you contribute tocontain a file documenting the changes You made to createthat covered code  and  the  date of any change.  You  mustinclude  a  prominent  statement  that  the  modification  isderived, directly or indirectly, from original code provided bythe initial developer and including the name of the    initialdeveloper in (a) the source code, and (b) in any notice in anexecutable version  or  related  documentation  in  which  youdescribe the origin or ownership of the covered code.3.4. Intellectual property matters(a) Third party claims.If contributor has knowledge that a license  under a  thirdparty's  intellectual property  rights  is  required to exercisethe rights granted by such contributor under sections 2.1or 2.2, contributor must include a text file with the sourcecode distribution titled "LEGAL" which describes the claimand the  party  making  the  claim  in  sufficient detail that arecipient will know whom to contact. If contributor obtainssuch knowledge after the modification is made available asdescribed in section 3.2, contributor shall promptly modi-fy the LEGAL file in all copies contributor makes availablethereafter  and  shall  take  other  steps  (such  as  notifyingappropriate mailing lists or newsgroups) reasonably calcu-lated to inform those who received the covered code thatnew knowledge has been obtained.(b) Contributor APIs.If  contributor's  modifications  include  an  applicationprogramming interface and contributor has knowledge ofpatent licenses which are reasonably necessary to implementthat API, contributor must also include this information inthe LEGAL file.
APPENDIX147(c) Representations.contributor represents that, except as disclosed pursuantto section 3.4(a) above, contributor believes that contributor'smodifications  are  contributor's  original  creation(s)and/or contributor has sufficient rights to grant the rightsconveyed by this license.3.5. Required notices.You must duplicate the notice in exhibit A in each file ofthe source code.  If it is not possible to put such notice ina particular source code file due to its structure, then Youmust include such notice in a location (such as a relevantdirectory) where a user would be likely to look for such anotice.  If You created one  or  more modification(s), youmay  add  your  name  as  a  contributor  to  the  noticedescribed in exhibit A. you must also duplicate this licensein  any  documentation  for  the  source  code  where  Youdescribe recipients' rights or ownership rights relating tocovered code.  You may choose to offer, and to charge afee for, warranty, support, indemnity or liability obligationsto one or more recipients of covered code. However, youmay do so only on your own behalf, and not on behalf ofthe Initial developer or any contributor. You must make itabsolutely clear than any such warranty, support, indemni-ty or liability obligation is offered by you alone, and Youhereby agree to indemnify the Initial developer and everycontributor for any liability incurred by the Initial develop-er  or  such  contributor  as  a  result  of  warranty,  support,indemnity or liability terms you offer.3.6. Distribution of executable versions.You may distribute covered code in executable form only ifthe  requirements  of  section  3.1-3.5  have  been  met  forthat covered code, and if you include a notice stating thatthe source code version of the covered code  is availableunder the terms of this license, including a description ofhow and where you have fulfilled the obligations of section3.2.  The  notice  must  be  conspicuously  included  in  anynotice in an executable version, related documentation orcollateral in which you describe recipients' rights relatingto  the  covered  code.  You  may  distribute  the  executableversion  of  covered  code  or  ownership  rights  under  alicense of your choice, which may contain terms differentfrom this license, provided that you are in compliance withthe terms of this license and that the license for the exe-cutable version does not attempt to limit or alter the recip-ient's rights in the source code version from the rights setforth in this license. If you distribute the executable ver-sion under a different license you must make it absolutelyclear  that  any  terms  which  differ  from  this  license  areoffered by you alone, not by the Initial developer or anycontributor.  You  hereby  agree  to  indemnify  the  initialdeveloper and every contributor for any liability incurredby the initial developer or such contributor as a result ofany such terms You offer.3.7. Larger works.You may create a larger work by combining covered codewith other code not governed by the terms of this licenseand distribute the larger work as a single product. In sucha  case,  you  must  make  sure  the  requirements  of  thislicense are fulfilled for the covered code.4. Inability to comply due to statute or regulation.If it is impossible for you to comply with any of the termsof this license with respect to some or all of the coveredcode due to statute, judicial order, or regulation then youmust: (a) comply with the terms of this license to the max-imum extent possible; and (b) describe the limitations andthe code they affect. Such description must be included inthe  LEGAL  file  described  in  section  3.4  and  must  beincluded with all distributions of the source code. Exceptto  the  extent  prohibited  by  statute  or  regulation,  suchdescription must be sufficiently detailed for a recipient ofordinary skill to be able to understand it.5. Application of this license.This license applies to code to which the initial developer hasattached the notice in exhibit A and to related covered code.6. Versions of the license.6.1. New versions.Netscape communications corporation (“Netscape”) maypublish  revised  and/or  new  versions  of  the  license  fromtime  to time.  Each  version  will  be  given  a  distinguishingversion number.6.2. Effect of new versions.Once covered code has been published under a particularversion of the license, you may always continue to use itunder the terms of that version. You may also choose touse such covered code under the terms of any subsequentversion  of  the  license  published  by  netscape.  No  oneother  than  netscape  has  the  right  to  modify  the  termsapplicable to covered code created under this license.6.3. Derivative works.If  You  create  or  use  a  modified  version  of  this  license(which you may only do in order to apply it to code whichis not already covered code governed by this license), Youmust  (a)  rename  Your  license  so  that  the  phrases"Mozilla",  "MOZILLAPL",  "MOZPL",  "Netscape",  "MPL","NPL" or any confusingly similar phrase do not appear inyour license (except to note that your license differs fromthis  license)  and  (b)  otherwise  make  it  clear  that  Yourversion of the license contains terms which differ from theMozilla Public license and netscape Public License. (Fillingin the name of the initial developer, original code or con-tributor  in the  notice described in exhibit A shall  not  ofthemselves be deemed to be modifications of this license.)
APPENDIX148APPENDIX7. DISCLAIMER OF WARRANTY.COVERED  CODE  IS  PROVIDED  UNDER  THIS  LICENSEON  AN  “AS  IS”  BASIS,  WITHOUT  WARRANTY  OF  ANYKIND,  EITHER  EXPRESSED  OR  IMPLIED,  INCLUDING,WITHOUT LIMITATION,  WARRANTIES THAT  THE  COV-ERED CODE IS FREE OF DEFECTS, MERCHANTABLE, FITFOR  A  PARTICULAR  PURPOSE  OR  NON-INFRINGING.THE  ENTIRE  RISK  AS  TO  THE  QUALITY  AND  PERFOR-MANCE  OF  THE  COVERED  CODE  IS  WITH  YOU.SHOULD  ANY  COVERED  CODE  PROVE  DEFECTIVE  INANY RESPECT, YOU (NOT THE INITIAL DEVELOPER ORANY  OTHER  CONTRIBUTOR)  ASSUME  THE  COST  OFANY NECESSARY SERVICING, REPAIR OR CORRECTION.THIS  DISCLAIMER  OF  WARRANTY  CONSTITUTES  ANESSENTIAL  PART  OF  THIS  LICENSE.  NO  USE  OF  ANYCOVERED CODE IS AUTHORIZED HEREUNDER EXCEPTUNDER THIS DISCLAIMER.8. TERMINATION.8.1. This license and the rights granted hereunder will terminateautomatically if you fail to comply with terms herein andfail to cure such breach within 30 days of becoming awareof the breach. All sublicenses to the covered code whichare properly granted shall survive any termination of thislicense. Provisions which, by their nature, must remain ineffect beyond the termination of this license shall survive.8.2.  If you initiate litigation by asserting a patent infringementclaim (excluding declatory judgment actions) against ini-tial  developer  or  a  contributor  (the  initial  developer  orcontributor against whom you file such action is referredto as “Participant”) alleging that:(a) such participant's contributor version directly or indi-rectly  infringes  any  patent,  then  any  and  all  rightsgranted by such participant to you under sections 2.1and/or 2.2 of this license shall, upon 60 days noticefrom Participant terminate prospectively, unless if within60 days after receipt of notice you either: (i) agree inwriting to pay participant a mutually agreeable reasonableroyalty for your past and future use of modificationsmade by such participant, or (ii) withdraw your litigationclaim with respect to  the contributor version againstsuch participant. If within 60 days of notice, a reasonableroyalty  and  payment  arrangement  are  not  mutuallyagreed upon in writing by the parties or the litigationclaim is not withdrawn, the  rights granted by partici-pant to you under sections 2.1 and/or 2.2 automati-cally terminate at the expiration of the 60 day noticeperiod specified above.(b) any software, hardware, or device, other than such par-ticipant's  contributor  Version,  directly  or  indirectlyinfringes any patent, then any rights granted to You bysuch participant under sections 2.1(b) and 2.2(b) arerevoked effective as of the date you first made, used,sold, distributed, or had made, modifications made bythat participant.8.3. If you assert a patent infringement claim against partici-pant  alleging  that  such  participant's  contributor  versiondirectly or indirectly infringes any patent where such claimis resolved (such as by license or settlement) prior to theinitiation of  patent  infringement  litigation, then  the  rea-sonable value of the licenses granted by such participantunder sections 2.1 or 2.2 shall be taken into account indetermining  the  amount  or  value  of  any  payment  orlicense.8.4. In  the  event  of  termination  under  sections  8.1  or  8.2above, all end user license agreements (excluding distributorsand resellers) which have been validly granted by you orany distributor hereunder prior to termination shall survivetermination.9. LIMITATION OF LIABILITY.UNDER  NO  CIRCUMSTANCES  AND  UNDER  NO  LEGALTHEORY,  WHETHER  TORT  (INCLUDING  NEGLIGENCE),CONTRACT,  OR  OTHERWISE, SHALL  YOU,  THE  INITIALDEVELOPER, ANY OTHER CONTRIBUTOR, OR ANY DIS-TRIBUTOR  OF  COVERED  CODE,OR  ANY  SUPPLIER  OFANY OF SUCH PARTIES, BE LIABLE TO ANY PERSON FORANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUEN-TIAL DAMAGES OF ANY CHARACTER INCLUDING, WITH-OUT LIMITATION, DAMAGES FOR LOSS OF GOODWILL,WORK  STOPPAGE,  COMPUTER  FAILURE  OR  MALFUNC-TION,  OR  ANY  AND  ALL  OTHER  COMMERCIAL  DAM-AGES  OR  LOSSES,  EVEN  IF  SUCH  PARTY  SHALL  HAVEBEEN INFORMED OF THE POSSIBILITY OF SUCH DAM-AGES. THIS LIMITATION OF LIABILITY SHALL NOT APPLYTO LIABILITY FOR DEATH OR PERSONAL INJURY RESULT-ING FROM SUCH PARTY'S NEGLIGENCE TO THE EXTENTAPPLICABLE  LAW  PROHIBITS  SUCH  LIMITATION.  SOMEJURISDICTIONS  DO  NOT  ALLOW  THE  EXCLUSION  ORLIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAM-AGES, SO THIS EXCLUSION AND LIMITATION MAY NOTAPPLY TO YOU.10. U.S. GOVERNMENT END USERS.The covered code is a "commercial item," as that term isdefined  in  48  C.F.R.  2.101  (Oct.  1995),  consisting  of"commercial computer software" and "commercial computersoftware  documentation,"  as  such  terms  are  used  in  48C.F.R.  12.212  (Sept.  1995).  Consistent  with  48  C.F.R.12.212  and  48  C.F.R.  227.7202-1  through  227.7202-4(June 1995), all U.S. Government end users acquire cov-ered code with only those rights set forth herein.
APPENDIX14911. MISCELLANEOUS.This license represents the complete agreement concerningsubject  matter  hereof.  If  any  provision  of  this  license  isheld to be unenforceable, such provision shall be reformedonly to the extent necessary to make it enforceable. ThisLicense  shall  be  governed  by  California  law  provisions(except to the extent applicable law, if any, provides oth-erwise),  excluding  its  conflict-of-law  provisions.  Withrespect to disputes in which at least one party is a citizenof, or an entity chartered or registered to do business inthe united states of america, any litigation relating to thisLicense shall be subject to the jurisdiction of the federalcourts  of  the  northern  district  of  california,  with  venuelying in santa clara county, california, with the losing partyresponsible  for  costs, including  without  limitation, courtcosts  and  reasonable  attorneys'  fees  and  expenses.  Theapplication of the united nations convention on contractsfor the International sale of goods is expressly excluded.Any law or regulation which provides that the language ofa contract shall be construed against the drafter shall notapply to this license.12. RESPONSIBILITY FOR CLAIMS.As  between  initial  developer  and  the  contributors,  eachparty is responsible for claims and damages arising, directlyor  indirectly,  out  of  its  utilization  of  rights  under  thislicense and you agree to work with  initial developer  andcontributors to distribute such responsibility on an equitablebasis. Nothing herein is  intended or  shall  be deemed  toconstitute any admission of liability.13. MULTIPLE-LICENSED CODE.Initial  developer  may  designate  portions  of  the  coveredcode  as  "Multiple-Licensed".  "Multiple-Licensed"  meansthat the initial developer permits you to utilize portions ofthe  covered  code  under  your  choice  of  the  NPL  or  thealternative licenses, if any, specified by the initial developerin the file described in exhibit A.EXHIBIT A -Mozilla Public License.The contents of this file are subject to the Mozilla Public LicenseVersion 1.1  (the “license”); you may not use  this  file except incompliance  with  the  License.  You  may  obtain  a  copy  of  thelicense at http://www.mozilla.org/MPL/Software distributed under the license is distributed on an "ASIS" basis, WITHOUT WARRANTY OF ANY KIND, either expressor  implied.  See  the  license  for  the  specific  language  governingrights and limitations under the License.The Original Code is ______________________________________.The  Initial  Developer  of  the  Original  Codeis___________________.Portions  created  by  ______________________  are  Copyright  (C)_______________________. All Rights Reserved.Contributor(s): ______________________________________.Alternatively,  the  contents  of  this  file  may  be  used  under  theterms of the _____ license (the  "[___] License"), in which casethe provisions of [______] license are applicable instead of thoseabove.  If you wish to allow use of your version of this file onlyunder the terms of the [____] license and not to allow others touse your version of this file under the MPL, indicate your decisionby  deleting    the  provisions  above  and  replace    them  with  thenotice and other provisions required by the [___] license.  If youdo not delete the provisions above, a recipient may use your versionof this file under either the MPL or the [___] license."NOTE: The text of this exhibit A may differ slightly from the textof the notices in the source code files of the original code. Youshould use the text of this exhibit A rather than the text found inthe original code/source code for Your modifications.

Navigation menu