LG Electronics USA 42PC3DVUD PLASMA MONITOR User Manual 527A

LG Electronics USA PLASMA MONITOR 527A

Contents

User Manual 2

15IntroductionVOLCHPOWER1 2 3 4 5 6 7809 MENUMUTE FAVDAY -GUIDEDAY+RATIOVCRTVDVDENTERAPMADJUSTSAPEZ SOUNDEZ PICFREEZEFLASHBKPA G EPA G EEXITTIMERCCINFOAUDIOCABLESTBMODETV INPUTBrief Info.Brief Info.What is Brief Info?: Brief Info shows the present screen information. : On Watching with the upper Input signal, press the INFObutton.How to use?1. Press the INFO button to show the Brief Info on the screen. 2. Press the INFO button or EXIT button to exit.- The INFO button does not work in Component1,Component2, RGB, and HDMI/DVI modes.This function works in the following mode: • Watching TV/DTV/CATV/CADTV• Watching Video, Front VideoBrief Info Title Test Brief Info Title Test Brief Inf..SAT, Jan 20, 2005 7:00PMMultilingualCaption 1080i TV-PG D L S V6:55AMDTV 2-1CC 4:3Program titleProgram start time Banner informationProgram progress barProgram finish timePresent timeDay of weekMonth, YearThe original aspect ratio of the video is 4:3The original aspect ratio of the video is 16:9 (wide)The video resolution is 720x480iThe video resolution is 720x480pThe video resolution is 1280x720pThe video resolution is 1920x1080iMultilingual: The program contains two or more audioservices. Press the SAP button to select wanted Audio.Caption: The program contains one or more caption ser-vices. Press the CC button to select wanted Closed cap-tion.V-Chip: The program contains V-Chip information. Referto the LOCK menu: D (Dialogue), L (Language), S (Sex), V(Violence), FV (Fantasy Violence)16 : 94 : 3CC480i480p720p1080iABCDEFGHIJ...10:40AMDolby Digital HDINFO
16IntroductionVOLCHPOWER1 2 3 4 5 6 7809 MENUMUTE FAVDAY -GUIDEDAY+RATIOVCRTVDVDENTERFLASHBKPA G EPA G EEXITTIMERCCINFOAUDIOCABLESTBMODETV INPUTEPG (Electronic Program Guide) EPG (Electronic Program Guide) (In DTV mode)(In DTV mode)- This system has an Electronic Program Guide (EPG) to helpyour navigate through all the possible viewing options.- The EPG supplies information such as program listings, startand end times for all available services. - This function can be used only when the EPG information isbroadcasted by broadcasting companies.- The EPG displays the program description for next 7 days.- This function is only supported in DTV mode.Press the GUIDE button to switch on EPG.Press the DD / EE/ FF / GGbutton to select desired program, thenpress the ENTER button to display the selected program.Press the GUIDE or EXIT button again to switch off EPG andreturn to TV viewing.123Remote Control Buttons FunctionD / E / F / GSelect the desired programChange to the selected channelFF / GG Jump PageIFF / GGIChange the dateGUIDE/EXIT Switch off EPGGUIDEInstalling BatteriesOpen the battery compartmentcover on the back side.Insert two batteries in correctpolarity (+ with +, - with -). Don’tmix old or used batteries with newones.Close the cover.* Use a remote control 7 meter distanceand 30 degree (left/right) within thereceiving unit scope.* Dispose of used batteries in a recyclebin to prevent environment.VOLCHPOWERMENUMUTEFAVDAY -GUIDEDAY+RATIOVCRTVDVDENTERPAGEPAGEEXITTIMERCCINFOAUDIOCABLESTBMODETV INPUTVOLCHPOWERMENUMUTEFAVDAY -GUIDEDAY+RATIOVCRTVDVDENTERPAGEPAGEEXITTIMERCCINFOAUDIOCABLESTBMODETV INPUT123
17InstallationInstallationInstallationDesktop Pedestal Installation4 inches 4 inches4 inches4 inches4 inches 4 inches4 inches4 inchesFor proper ventilation, allow a clearance of 4" on each side and from the wall.GROUNDINGEnsure that you connect the earth ground wire to prevent pos-sible electric shock. If grounding methods are not possible,have a qualified electrician install a separate circuit breaker.Do not try to ground the unit by connecting it to telephonewires, lightening rods, or gas pipes.PowerSupplyShort-circuitBreaker•The TV can be installed in various ways such as on a wall, or on a desktop etc.•The TV is designed to be mounted horizontally.
18InstallationHold the CABLE MANAGE-MENT with both hands andpull it upward.Connect the cables as necessary.After connecting the cables neat-ly, arrange the cables to theCable Holder.To connect an additional equip-ment, see the External equip-ment Connections section.Reinstall the CABLE MANAGE-MENT as shown.123Bundle the cables using the sup-plied twister holder.4Basic Connection (For 32/37/42LC2D)Basic Connection (For 32/37/42LC2D)InstallationInstallation32LC2D 37/42LC2D32LC2D 37/42LC2D32LC2D 37/42LC2D
19InstallationBasic Connection(For 42/50PC3D, 42PC3DV)Basic Connection(For 42/50PC3D, 42PC3DV)Hold the CABLE MANAGEMENT with both hands and pull it upward.Connect the cables as necessary.After connecting the cables neatly, arrange the cables to the Cable Holder.To connect an additional equipment, see the External equipment Connections section.Reinstall the CABLE MANAGEMENT as shown.123Bundle the cables using the supplied twister holder.4
20InstallationHow to join the product assembly to the wall to protect the set tumbling- Set it up close to the wall so the product doesn’t fall over when it is pushed backwards. - The instructions shown below is a safer way to set up the product, which is to fix it on the wall so the prod-uct doesn’t fall over when it is pulled in the forward direction. It will prevent the product from falling for-ward and hurting people. It will also prevent the product from damage caused by fall. Please make surethat children don’t climb on or hang from the product. 42PC3D/42PC3DV/50PC3DNotes•When moving the product to another place undo the ropes first.•Use a product holder or a cabinet that is big and strong enough for the size and weight of the product. •To use the product safely make sure that the height of the bracket that is mounted on the wall is sameas that of the product. 2 13Use the bracket and the bolt to fix the product to the wall as shown in the picture. Secure the bracket with the bolt (not provided as parts of the product, must purchase separately) onthe wall.Use a sturdy rope (not provided as parts of the product, must purchase separately) to tie the product.It is safer to tie the rope so it becomes horizontal between the wall and the product.12332/37/42LC2DIf the set will be mounted on a desk top, insert the 2 eye-bolts and tighten them securely in the upperholes as shown.Install the wall brackets on the wall with 2 bolts*, (not supplied with the product), as shown.Match the height of the eye-bolts and the wall brackets.Check to be sure the eye-bolts and the brackets are tightened securely.Secure the TV assembly to the wall with strong strings or wire cables, (not supplied with the product), asshown.12345
21InstallationAntenna or Cable ConnectionMulti-family Dwellings/Apartments(Connect to wall antenna socket)Single-family Dwellings /Houses(Connect to wall jack for outdoor antenna)Outdoor AntennaWall Antenna SocketVHF AntennaUHF AntennaRF Coaxial Wire (75 ohm)Turn clockwise to tighten.AV IN 2L/MONORAUDIOS-VIDEOVIDEOHDMI/DVI INDIGITAL AUDIO OUTOPTICALRS-232C IN(CONTROL & SERVICE)REMOTECONTROLRGB IN(PC/DTV)AUDIO IN(RGB/DVI)VIDEOAUDIO( )VIDEOAUDIOCOMPONENT INS-VIDEOAV IN 1AV OUTANTENNAANTENNAININCABLEINL/MONORAUDIOS-VIDEOVIDEOAV IN 2Bronze WireBe careful not to bend the bronze wire whenconnecting the antenna.Analog and Digital TV signals provided on antenna- Antenna or Cable Service without a Cable Box Connection.- For optimum picture quality, adjust antenna direction if needed.Cable TV Wall JackRF Coaxial Wire (75 ohm)Turn clockwise to tighten.Analog and Digital TV signals provided on cableAnalog and Digital TV signals provided on cable and antennaCable TV Wall JackRF Coaxial Wire (75 ohm)Bronze WireBronze WireTurn clockwise to tighten.AntennaRF Coaxial Wire (75 ohm)•In a poor signal area to improve picture quality, purchase and install a sig-nal amplifier.•If the antenna needs to be split for two TV’s, install a “2-Way Signal Splitter”in the connections.•If the antenna is not installed properly, contact your dealer for assistance.AV IN 2L/MONORAUDIOS-VIDEOVIDEOHDMI/DVI INDIGITAL AUDIO OUTOPTICALRS-232C IN(CONTROL & SERVICE)REMOTECONTROLRGB IN(PC/DTV)AUDIO IN(RGB/DVI)VIDEOAUDIO( )VIDEOAUDIOCOMPONENT INS-VIDEOAV IN 1AV OUTANTENNAANTENNAININCABLEINL/MONORAUDIOS-VIDEOVIDEOAV IN 2External Equipment ConnectionsExternal Equipment ConnectionssignalamplifierNOTE: All cables shown are not included with the TVAV IN 2L/MONORAUDIOS-VIDEOVIDEOHDMI/DVI INDIGITAL AUDIO OUTOPTICALRS-232C IN(CONTROL & SERVICE)REMOTECONTROLRGB IN(PC/DTV)AUDIO IN(RGB/DVI)VIDEOAUDIO( )VIDEOAUDIOCOMPONENT INS-VIDEOAV IN 1AV OUTANTENNAINCABLECABLEININL/MONORAUDIOS-VIDEOVIDEOAV IN 2AV IN 2L/MONORAUDIOS-VIDEOVIDEOHDMI/DVI INDIGITAL AUDIO OUTOPTICALRS-232C IN(CONTROL & SERVICE)REMOTECONTROLRGB IN(PC/DTV)AUDIO IN(RGB/DVI)VIDEOAUDIO( )VIDEOAUDIOCOMPONENT INS-VIDEOAV IN 1AV OUTANTENNAANTENNAININCABLECABLEININL/MONORAUDIOS-VIDEOVIDEOAV IN 2
22Installation- To avoid picture noise (interference), leave an adequate distance between the VCR and TV.- Typically a frozen still picture from a VCR. If the 4:3 picture format is used; the fixed images on the sidesof the screen may remain visible on the screen.VCR SetupWhen connecting with an antennaS-VIDEO OUTIN(R) AUDIO (L) VIDEO34OUTPUTSWITCHANT OUTANT INVIDEOAUDIO( )VIDEOAUDIOCOMPONENT INS-VIDEOAV IN 1AV OUTANTENNAANTENNAINCABLECABLEINVIDEOAUDIO( )VIDEOAUDIOCOMPONENT INS-VIDEOAV IN 1AV OUTWhen connecting with a RCA cableS-VIDEOOUTIN(R) AUDIO (L) VIDEO34OUTPUTSWITCHANT OUTANT INVIDEOAUDIOMONO( )VIDEOAUDIOCOMPONENT INS-VIDEOAV IN 1V IN 1AV OUTV OUTANTENNAINCABLEINVIDEOAUDIO( )VIDEOAUDIOCOMPONENT INS-VIDEOAV IN 1AV OUTVCR123Connect the AUDIO/VIDEO jacks between TVand VCR. Match the jack colors (Video = yellow,Audio Left = white, and Audio Right = red) Insert a video tape into the VCR and press PLAYon the VCR. (Refer to the VCR owner’s manual.) Select AV1 input source using the INPUT buttonon the remote control.- If connected to AV IN2, select AV2 input source.•If you have a mono VCR, connect the audio cable from the VCR to the AUDIO L/MONO jack of theset.•This TV finds the connected input sources automatically for AV1, AV2 and Component 1-2. It is pre-sumed that RGB and HDMI/DVI sources are connected.11234Connect the RF antenna out socket of the VCR tothe Antenna socket on the set.Connect the antenna cable to the RF antenna insocket of the VCR.Set VCR output switch to 3 or 4 and then tune TVto the same channel number.Insert a video tape into the VCR and press PLAYon the VCR. (Refer to the VCR owner’s manual.) VCR12
23InstallationWhen connecting with an S-Video cableS-VIDEOOUTIN(R) AUDIO (L) VIDEO34OUTPUTSWITCHANT OUTANT INVIDEOAUDIO( )VIDEOAUDIOCOMPONENT INS-VIDEOAV IN 1AV OUTANTENNAINCABLEINVIDEOAUDIOMONO( )VIDEOAUDIOCOMPONENT INS-VIDEOAV IN 1V IN 1AV OUTV OUTVCR112234Connect the S-VIDEO output of the VCR to the S-VIDEO input on the set. The picture quality isimproved; compared to normal composite (RCAcable) input.Connect the audio outputs of the VCR to theAUDIO input jacks on the set.Insert a video tape into the VCR and press PLAYon the VCR. (Refer to the VCR owner’s manual.) Select AV1 input source with using the INPUTbutton on the remote control.- If connected to AV IN2, select AV2 input source.Do not connect to both Video and S-Video at the same time. In the event that you connectboth Video and the S-Video cables, only the S-Video will work.RLAUDIO VIDEOAV IN 2V IN 2L/MONOMONORAUDIOAUDIOS-VIDEOS-VIDEOVIDEOVIDEOCamcorderVideo Game Set1123Connect the AUDIO/VIDEO jacks between TVand external equipment. Match the jack colors(Video = yellow, Audio Left = white, and AudioRight = red).Select AV2 input source with using the INPUTbutton on the remote control.- If connected to AV IN1 input, select AV1 inputsource.Operate the corresponding external equipment.Refer to external equipment operating guide.External AV Source Setup•This TV finds the connected input sourcesautomatically for AV1, AV2 and Component 1-2. It is presumed that RGB and HDMI/DVIsources are connected.
24InstallationDVD SetupWhen connecting with a S-Video cableS-VIDEO(R) AUDIO (L)VIDEOAUDIO( )VIDEOAUDIOCOMPONENT INS-VIDEOAV IN 1AV OUTVIDEOVIDEOAUDIOUDIOMONO( )VIDEOVIDEOAUDIOUDIOCOMPONENT INCOMPONENT INS-VIDEOS-VIDEOAV IN 1V IN 1AV OUTV OUTHDMI/DVI INDIGITAL AUDIO OUTOPTICALRS-232C IN(CONTROL & SERVICE)DVD1122345Connect the S-VIDEO output of the DVD to the S-VIDEO input on the set.Connect the audio outputs of the DVD to the AUDIO input jacks on the set.Turn on the DVD player, insert a DVD.Select AV1 input source with using the INPUT button on the remote control.- If connected to AV IN2, select AV 2 input source.Refer to the DVD player's manual for operating instructions.When connecting with a HDMI cable123Connect the HDMI output of the DVD to theHDMI/DVI IN jack on the set.Select HDMI/DVI input source with using theINPUT button on the remote control.Refer to the DVD player's manual for operatinginstructions.VIDEOAUDIO( )VIDEOAUDIOCOMPONENT INS-VIDEOAV IN 1AV OUTVIDEOAUDIO( )VIDEOAUDIOCOMPONENT INS-VIDEOAV IN 1AV OUTHDMI/DVI INDIGITAL AUDIO OUTOPTICALRS-232C INRS-232C IN(CONTROL & SERVICE)HDMI-DVD OUTPUTDVD1•TV can receive the video and audio signalsimultaneously with using a HDMI cable.•If the DVD supports Auto HDMI function, theDVD output resolution will be automaticallyset to 1280x720p.•If the DVD does not support Auto HDMI, youneed to set the output resolution appropriate-ly. To get the best picture quality, adjust theoutput resolution of the DVD to 1280x720p.
25InstallationWhen connecting with a component cable12345Connect the video outputs (Y, PB, PR) of the DVD to the COMPONENT IN VIDEO jacks on the set.Connect the audio outputs of the DVD to the COMPONENT IN AUDIO jacks on the set.Turn on the DVD player, insert a DVD.Select Component 1 input source with using the INPUT button on the remote control.Refer to the DVD player's manual for operating instructions.•Component Input portsTo get better picture quality, connect a DVD player to the component input ports as shown below.Y PBPRComponent ports on the TVYYYYPbB-YCbPBPrR-YCrPRVideo output ports on DVD playerBR(R) AUDIO (L)VIDEOVIDEOAUDIOUDIOMONO( )VIDEOVIDEOAUDIOUDIOCOMPONENT INCOMPONENT INS-VIDEOS-VIDEOAV IN 1V IN 1AV OUTV OUTVIDEOAUDIO( )VIDEOAUDIOCOMPONENT INS-VIDEOAV IN 1AV OUTHDMI/DVI INDIGITAL AUDIO OUTOPTICALRS-232C IN(CONTROL & SERVICE)DVD1 2

Navigation menu