LG Electronics USA 47LS5700UA LED LCD TV Monitor User Manual EMISSION TEST REPORT
LG Electronics USA LED LCD TV Monitor EMISSION TEST REPORT
Users Manual
Order Number : GETEC-C1-11-286 FCC Part 15 subpart B Test Report Number : GETEC-E3-11-132 Page 1 / 1 APPENDIX G : USER’S MANUAL EUT Type: LED LCD TV/Monitor FCC ID.: BEJ47LS5700UA OWNER’S MANUAL LED LCD TV Please read this manual carefully before operating your set and retain it for future reference. 32LS5700 42LS5700 47LS5700 55LS5700 60LS5700 42LS5750 47LS5750 55LS5750 60LS5750 P/NO : MFL67468101 (1111-REV00) 42LM6200 47LM6200 55LM6200 65LM6200 47LM6210 55LM6210 47LM6250 55LM6250 65LM6250 47LM6400 55LM6400 60LM6450 42LM6700 47LM6700 55LM6700 47LM6750 55LM6750 47LM7600 55LM7600 www.lg.com 2 LICENSES LICENSES Supported licenses may differ by model. For more information about licenses, visit www.lg.com. Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified® device that plays DivX video. Visit divx.com for more information and software tools to convert your files into DivX video. ENGLISH ENG ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to complete your registration. “DivX Certified® to play DivX® video up to HD 1080p, including premium content.” “DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license.” “Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668; 7,515,710; 7,519,274” IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your product. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING/CAUTION Clean only with a dry cloth. y Do not block any ventilation openings. Install y in accordance with the manufacturer’s instructions. Do not install near any heat sources such y as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. - TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. Do not defeat the safety purpose of the y polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet (Can differ by country). ENG ENGLISH The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. Do not use this apparatus near water. y 4 IMPORTANT SAFETY INSTRUCTIONS Protect the power cord from being walked on y or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Only use attachments/accessories specified y by the manufacturer. Use only with a cart, stand, tripod, bracket, y or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. ENGLISH ENG Unplug this apparatus during lightning y storms or when unused for long periods of time. Refer all servicing to qualified service y personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. Never touch this apparatus or antenna during y a thunder or lightning storm. When mounting a TV on the wall, make sure y not to install the TV by hanging the power and signal cables on the back of the TV. Do not allow an impact shock or any objects y to fall into the product, and do not drop anything onto the screen. CAUTION concerning the Power Cord y (Can differ by country): It is recommended that appliances be placed upon a dedicated circuit; that is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner’s manual to be certain. Do not connect too many appliances to the same AC power outlet as this could result in fire or electric shock. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized service. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. Do not move the TV with the power cord plugged in. Do not use a damaged or loose power cord. Be sure do grasp the plug when unplugging the power cord. Do not pull on the power cord to unplug the TV. Warning - To reduce the risk of fire or y electrical shock, do not expose this product to rain, moisture or other liquids. Do not touch the TV with wet hands. Do not install this product near flammable objects such as gasoline or candles, or expose the TV to direct air conditioning. IMPORTANT SAFETY INSTRUCTIONS Do not expose to dripping or splashing and y do not place objects filled with liquids, such as vases, cups, etc. on or over the apparatus (e.g. on shelves above the unit). Grounding y Ensure that you connect the earth ground wire to prevent possible electric shock (i.e. a TV with a three-prong grounded AC plug must be connected to a three-prong grounded AC outlet). If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes. Power Supply Short-circuit Breaker As long as this unit is connected to the AC y wall outlet, it is not disconnected from the AC power source even if the unit is turned off. Do not attempt to modify this product in any y way without written authorization from LG Electronics. Unauthorized modification could void the user’s authority to operate this product. ANTENNAS Outdoor antenna grounding y (Can differ by country): If an outdoor antenna is installed, follow the precautions below. An outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits as death or serious injury can occur. Be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code (NEC) in the U.S.A. provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes and requirements for the grounding electrode. Antenna grounding according to the National Electrical Code, ANSI/NFPA 70 Antenna Lead in Wire Ground Clamp Electric Service Equipment Ground Clamp Antenna Discharge Unit (NEC Section 810-20) Grounding Conductor (NEC Section 810-21) Power Service Grounding Electrode System (NEC Art 250, Part H) NEC: National Electrical Code Cleaning y When cleaning, unplug the power cord and wipe gently with a soft cloth to prevent scratching. Do not spray water or other liquids directly on the TV as electric shock may occur. Do not clean with chemicals such as alcohol, thinners or benzine. Moving y Make sure the product is turned off, unplugged and all cables have been removed. It may take 2 or more people to carry larger TVs. Do not press or put stress on the front panel of the TV. Ventilation y Install your TV where there is proper ventilation. Do not install in a confined space such as a bookcase. Do not cover the product with cloth or other materials while plugged. Do not install in excessively dusty places. If you smell smoke or other odors coming y from the TV, unplug the power cord and contact an authorized service center. Do not press strongly upon the panel with y your hand or a sharp object such as a nail, pencil or pen, or make a scratch on it. Keep the product away from direct sunlight. y ENG ENGLISH DISCONNECTING DEVICE FROM THE MAIN y POWER The power outlet must remain readily accessed in the event the device needs to be unplugged. 6 IMPORTANT SAFETY INSTRUCTIONS Dot Defect y The Plasma or LCD panel is a high technology product with resolution of two million to six million pixels. In a very few cases, you could see fine dots on the screen while you’re viewing the TV. Those dots are deactivated pixels and do not affect the performance and reliability of the TV. Generated Sound y “Cracking” noise: A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to temperature and humidity. This noise is common for products where thermal deformation is required. Electrical circuit humming/panel buzzing: A low level noise is generated from a highspeed switching circuit, which supplies a large amount of current to operate a product. It varies depending on the product. This generated sound does not affect the performance and reliability of the product. ENGLISH ENG Take care not to touch the ventilation y openings. When watching the TV for a long period, the ventilation openings may become hot. This does not affect the performance of the product or cause defects in the product. Viewing 3D Imaging (For 3D TV) y - The vision of young children may still be developing. 3D contents should not be viewed by children under the age of 5. All other children’s viewing of 3D content should be supervised by a responsible adult. - Some viewers may experience symptoms of discomfort such as nausea, eye strain, fatigue and dizziness when viewing 3D content. All viewers should take regular breaks to help avoid these symptoms. If you experience any symptoms of discomfort, discontinue viewing and take a break until the symptoms go away. If symptoms continue, consult a doctor. - Following the guideline below may lessen the likelihood of experiencing such discomfort: · Viewing angle: watch 3D contents at the eye level of the center of the TV screen. · Viewing distance: watch 3D contents from the minimum distance of 2 times the diagonal size of the TV screen. If the TV feels cold to the touch, there may y be a small “flicker” when it is turned on. This is normal, there is nothing wrong with TV. Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots. However, they have no adverse effect on the TV’s performance. Avoid touching the LCD screen or holding your finger(s) against it for long periods of time. Doing so may produce some temporary distortion effects on the screen. DISPOSAL (Hg lamp only used in LCD TVs) The fluorescent lamp used in this product contains a small amount of mercury. Do not dispose of this product with general household waste. Disposal of this product must be carried out in accordance to the regulations of your local authority. Preventing “Image burn” or “Burn-in” on your TV screen If a fixed image displays on the TV screen for y a long period of time, it will be imprinted and become a permanent disfigurement on the screen. This is “image burn” or “burn-in” and not covered by the warranty. If the aspect ratio of the TV is set to 4:3 for a y long period of time, image burn may occur on the letterboxed area of the screen. Avoid displaying a fixed image on the TV screen y for a long period of time (2 or more hours for LCD, 1 or more hours for the Plasma TV) to prevent image burn. For USA and Canada NOTE TO CABLE/TV INSTALLER This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of the cable entry as practical. TABLE OF CONTENTS TABLE OF CONTENTS LICENSES IMPORTANT SAFETY INSTRUCTIONS TABLE OF CONTENTS INSTALLATION PROCEDURE ASSEMBLING AND PREPARING 10 11 12 13 13 14 15 16 Unpacking Optional Extras Parts and buttons Lifting and moving the TV Setting up the TV - Attaching the stand - Mounting on a table - Mounting on a wall - Tidying cables 17 MAKING CONNECTIONS 17 18 Connecting to an antenna or cable Connecting to a HD receiver, DVD, or VCR player - HDMI Connection - DVI to HDMI Connection - Component Connection - Composite Connection Connecting to a PC - HDMI Connection, DVI to HDMI Connection or RGB Connection Connecting to an Audio System - Digital Optical Audio Connection Connecting to a USB 18 19 20 21 22 22 24 24 25 26 REMOTE CONTROL 26 27 27 27 Magic Remote Control Functions - Registering Magic Remote Control - How to use Magic Remote Control - Precautions to Take when Using the Magic Remote Control 28 WATCHING TV 28 Turning the TV on for the first time 28 USING THE USER GUIDE 29 ENTERTAINMENT 29 29 31 Network Connection - Connecting to a wired network - Connecting to a wireless network 32 TROUBLESHOOTING 32 OPEN SOURCE SOFTWARE NOTICE 33 SPECIFICATIONS 36 MAINTENANCE 36 36 36 Cleaning Your TV - Screen, frame, Cabinet and stand - Power cord NOTE Image shown may differ from your TV. y Your TV’s OSD (On Screen Display) may y differ slightly from that shown in this manual. The available menus and options may differ y from the input source or product model that you are using. New features may be added to this TV in the y future. ENG ENGLISH 8 ASSEMBLING AND PREPARING INSTALLATION PROCEDURE 1 Open the package and make sure all the accessories are included. 2 Attach the stand to the TV set. 3 Connect an external device to the TV set. 4 Make sure the network connection is available. You can use the TV network functions only when the network connection is made. ASSEMBLING AND PREPARING Unpacking Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and item. ENGLISH ENG NOTE The items supplied with your product may vary depending on the model. y Product specifications or contents of this manual may be changed without prior notice due to y upgrade of product functions. For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm (0.39 y inches) thick and 18 mm (0.7 inches) width. Use an extension cable that supports USB 2.0 if the USB cable or USB memory stick does not fit y into your TV's USB port. *A *B 10 mm (0.39 inches) 18 mm (0.7 inches) CAUTION Do not use any unapproved items to ensure the safety and product life span. y Any damages or injuries by using unapproved items are not covered by the warranty. y In case of some model, the thin film on screen is a part of TV, So don’t take it off. y ASSEMBLING AND PREPARING Owner’s manual Cable holder (See p.18) Stand Screws 8 EA, M4 x 20 (See p.14, 14) Desk-mount Screw (Except LM6700 series) (See p.16) Ring spacers (Except LM6700 series) 4 EA (See p.15) Power Cord Composite video cable (See p.22, 20) Component video cable (See p.22) Cinema 3D Glasses (Except LS5700, LS5750 series) The number of 3D glasses may differ depending on the model or country. Polishing cloth (Depending on model) Use this to remove dust from the cabinet. ENG ENGLISH Magic Remote Control, Batteries (AA) (See p.28) 10 ASSEMBLING AND PREPARING Optional Extras Optional extras can be changed or modified for quality improvement without any notification. Contact your dealer to buy these items. These devices only work with certain models. AG-F2**, AG-F3** Cinema 3D Glasses The model name or design may be changed manufacturer’s circumstances or policies. AN-WF100 Wi-Fi dongle AN-MR300C Magic Motion Remote Dongle ENGLISH ENG AN-MR300 Magic Remote Control Compatibility AG-F2**, AG-F3** Cinema 3D Glasses LS5700 LS5750 LM6200 LM6210 LM6250 LM6400 LM6450 AN-WF100 Wi-Fi Dongle AN-MR300C Magic Motion Remote Dongle AN-MR300 Magic Remote Control Compatibility AG-F2**, AG-F3** Cinema 3D Glasses LM6700 LM6750 LM7600 AN-WF100 Wi-Fi Dongle AN-MR300C Magic Motion Remote Dongle AN-MR300 Magic Remote Control ASSEMBLING AND PREPARING 11 Parts and buttons For LS5700, LS5750, LM6200, LM6210, LM6250 series Screen Remote control and intelligent1 sensors Power indicator Speakers SETTINGS Touch Button v^ INPUT Description Scrolls through the saved channels. - + Adjusts the volume level. OK ٜ Selects the highlighted menu option or confirms an input. SETTINGS Accesses the main menu, or saves your input and exits the menus. INPUT Changes the input source. /I Turns the power on or off. Touch buttons2 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment. All of the buttons are touch sensitive and can be operated through simple touch with your finger. NOTE You can set the power indicator light to on or off by selecting OPTION in the main menus. y ENG ENGLISH OK 12 ASSEMBLING AND PREPARING For LM6400, LM6450, LM6700, LM6750, LM7600 series Screen Buttons OK SETTINGS INPUT ENGLISH ENG Speakers Remote control and intelligent1 sensors Power indicator Button Description v^ Scrolls through the saved channels. - + Adjusts the volume level. ( ܯOK) Selects the highlighted menu option or confirms an input. S (SETTINGS) Accesses the main menu, or saves your input and exits the menus. (INPUT) Changes the input source. / I) Turns the power on or off. Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment. NOTE You can set the power indicator light to on or off by selecting OPTION in the main menus. y ASSEMBLING AND PREPARING Lifting and moving the TV When moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size. 13 When transporting a large TV, there should y be at least 2 people. When transporting the TV by hand, hold the y TV as shown in the following illustration. CAUTION Avoid touching the screen at all times, as y this may result in damage to the screen. It is recommended to move the TV in the y box or packing material that the TV originally came in. Before moving or lifting the TV, disconnect y the power cord and all cables. When holding the TV, the screen should face y away from you to avoid damage. ENG ENGLISH Hold the top and bottom of the TV frame y firmly. Make sure not to hold the transparent part, speaker, or speaker grill area. When transporting the TV, do not expose the y TV to jolts or excessive vibration. When transporting the TV, keep the TV y upright, never turn the TV on its side or tilt towards the left or right. 14 ASSEMBLING AND PREPARING Setting up the TV Put your TV on a pedestal stand and mount the TV on a table or wall. Attaching the stand If you are not mounting the TV to a wall, use the following instructions to attach the stand. For LS5700, LS5750, LM6200, LM6210, LM6250 series 4 EA M4 x 20 Front Top View ENGLISH ENG CAUTION When attaching the stand to the TV y set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches. 4 EA M4 x 20 NOTE Remove the stand before installing the TV y on a wall mount by performing the stand attachment in reverse. CAUTION Tighten the screws firmly to prevent y the TV from tilting forward. Do not over tighten. ASSEMBLING AND PREPARING 15 For LM6400, LM6450, LM6700, LM6750, LM7600 series 4 EA M4 x 20 Front Top View CAUTION 4 EA M4 x 20 NOTE Remove the stand before installing the TV y on a wall mount by performing the stand attachment in reverse. CAUTION Tighten the screws firmly to prevent y the TV from tilting forward. Do not over tighten. ENG ENGLISH When attaching the stand to the TV y set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches. 16 ASSEMBLING AND PREPARING Securing the TV to a table Mounting on a table 1 Lift and tilt the TV into its upright position on a table. - Leave a 10 cm (4 inches) (minimum) space from the wall for proper ventilation. (Except LM6700 series) Fix the TV to a table to prevent from tilting forward, damage, and potential injury. To secure the TV to a table, insert and tighten the supplied screw on the rear of the stand. 10 cm (4 inches) 10 cm 10 cm 10 cm 2 Connect the power cord to a wall outlet. CAUTION ENGLISH ENG Do not place the TV near or on sources y of heat, as this may result in fire or other damage. NOTE Swivel 20 degrees to the left or right and y adjust the angle of the TV to suit your view. When adjusting the angle of the TV, watch y out for your fingers. 20 20 WARNING To prevent TV from falling over, the TV y should be securely attached to the floor/wall per installation instructions. Tipping, shaking, or rocking the TV may cause injury. ASSEMBLING AND PREPARING Securing the TV to a wall (optional) 17 Mounting on a wall Attach an optional wall mount bracket at the rear of the TV carefully and install the wall mount bracket on a solid wall perpendicular to the floor. When you attach the TV to other building materials, please contact qualified personnel. LG recommends that wall mounting be performed by a qualified professional installer. 10 cm (4 inches) 10 cm 10 cm 1 Insert and tighten the eye-bolts, or TV brackets and bolts on the back of the TV. 10 cm - If there are bolts inserted at the eye-bolts position, remove the bolts first. 2 Mount the wall brackets with the bolts to the Match the location of the wall bracket and the eye-bolts on the rear of the TV. 3 Connect the eye-bolts and wall brackets tightly with a sturdy rope. Make sure to use screws and wall mount bracket that meet the VESA standard. Standard dimensions for the wall mount kits are described in the following table. Model 32LS5700 42LS5700 32LS5750 42LS5750 42LM6200 42LM6250 42LM6700 47LS5700 55LS5700 47LS5750 55LS5750 47LM6200 55LM6200 47LM6250 55LM6250 47LM6700 55LM6700 47LM7600 55LM7600 VESA Standard screw Number of screws Wall mount bracket (optional) 200 x 200 M6 LSW200BX, LSW200BXG 400 x 400 M6 LSW400BX, LSW400BXG Model 65LM6200 VESA Standard screw Number of screws Wall mount bracket (optional) 600 x 400 M8 LSW600B Make sure to keep the rope horizontal with the flat surface. CAUTION Make sure that children do not climb on or y hang on the TV. NOTE Use a platform or cabinet that is strong and y large enough to support the TV securely. Brackets, bolts and ropes are optional. You y can obtain additional accessories from your local dealer. ENG ENGLISH wall. 18 ASSEMBLING AND PREPARING CAUTION Disconnect the power first, and then move y or install the TV. Otherwise electric shock may occur. If you install the TV on a ceiling or slanted y wall, it may fall and result in severe injury. Use an authorized LG wall mount and contact the local dealer or qualified personnel. Do not over tighten the screws as this may y cause damage to the TV and void your warranty. Use the screws and wall mounts that meet y the VESA standard. Any damages or injuries by misuse or using an improper accessory are not covered by the warranty. Tidying cables 1 Gather and bind the cables with the cable holder. Cable holder CAUTION NOTE ENGLISH ENG Use the screws that are listed on the VESA y standard screw specifications. The wall mount kit includes an installation y manual and necessary parts. The wall mount bracket is optional. You can y obtain additional accessories from your local dealer. The length of screws may differ depending y on the wall mount. Make sure to use the proper length. For more information, refer to the manual y supplied with the wall mount. Place the ring spacers on the set before y installing the wall mounting bracket so that the inclination of the backside of the set can be adjusted perpendicularly. If you use other manufacturer's wall bracket y for installation, insert the ring spacers into the VESA hole to mount the set. However, do not use it when you use LG wall bracket. Ring spacers Do not move the TV by holding the cable y holder, as the cable holders may break, and injuries and damage to the TV may occur. MAKING CONNECTIONS 19 MAKING CONNECTIONS Connect various external devices to the TV and switch input modes to select an external device. For more information on external device’s connection, refer to the manual provided with each device. Available external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices. NOTE If you record a TV program on a DVD recorder or VCR, make sure to connect the TV signal input cable y to the TV through a DVD recorder or VCR. For more information on recording, refer to the manual provided with the connected device. The external device connection may differ from the model. y Connect external devices to the TV regardless of the order of the TV port. y If you connect a gaming device to the TV, use the cable supplied with the gaming device. y Refer to the external equipment’s manual for operating instructions. y Connecting to an antenna or cable Connect an antenna, cable, or cable box to watch TV while referring to the following. The illustrations may differ from the actual items and a RF cable is optional. UHF Antenna Antenna ANTENNA / CABLE Coaxial (75Ω) Terminal CAUTION Make sure not to bend the copper wire of y the RF cable. Copper wire NOTE Complete all connections between devices, y and then connect the power cord to the power outlet to prevent damage to your TV. Use a signal splitter to use more than 2 TVs. y Visit http://lgknowledgebase.com for more y information about the antenna and cable connection. Search for antenna. ENG ENGLISH VHF Antenna 20 MAKING CONNECTIONS Connecting to a HD receiver, DVD, or VCR player Connect a HD receiver, DVD, or VCR player to the TV and select an appropriate input mode. HDMI Connection HDMI is the best way to connect a device. Transmits the digital video and audio signals from an external device to the TV. Connect the external device and the TV with the HDMI cable as shown in the following illustration. NOTE Use the latest High Speed HDMI™ Cable with CEC (Customer Electronics Control) function. y High Speed HDMI™ Cables are tested to carry an HD signal up to 1080p and higher. y 4 (PC) Choose any HDMI input port to connect. It does not matter which port you use. HDMI (*Not Provided) 1(ARC) IN ENGLISH ENG DVD/ Blu-Ray / HD Cable Box / HD STB NOTE DTV Audio Supported Codec: MPEG, Dolby y Digital HDMI Audio Supporeted Format: Dolby y Digital, PCM (Up to 192 KHz, 32k/44.1k/48k/ 88k/96k/176k/192k) -> Not supported DTS. ARC (Audio Return Channel) When connected with a high-speed y HDMI cable, digital audio can be sent to a compactible device without an additional optical audio cable. ARC is only supported on the HDMI input y 1 (ARC) port. An external audio device that supports ARC should be connected to HDMI 1 if you wish to use ARC. MAKING CONNECTIONS 21 DVI to HDMI Connection 4 (PC) Transmits the digital video signal from an external device to the TV. Connect the external device and the TV with the DVI-HDMI cable as shown in the following illustration. To transmit an audio signal, connect an audio cable. DVI OUT IN (*Not Provided) (*Not Provided) AUDIO OUT DVD/ Blu-Ray / HD Cable Box ENG ENGLISH (RGB/HDMI-PC) (RGB/HDMI-PC) AUDIO AUDIO 22 MAKING CONNECTIONS Component Connection Transmits analog video and audio signals from an external device to the TV. Connect the external device and the TV with a component cable as shown in the following illustration. NOTE If cables are installed incorrectly, it could case the image to display in black and white or with y distorted color. Check to ensure the cables are matched with the corresponding color connection. y IN COMPONENT AV VIDEO AUDIO PR PB ENGLISH ENG YELLOW GREEN (Use the component video cable provided.) (Use the composite video cable provided.) GREEN BLUE RED GREEN BLUE RED RED WHITE RED WHITE YELLOW (*Not Provided) (*Not Provided) RED BLUE GREEN RED WHITE AUDIO VIDEO DVD/ Blu-Ray / HD Cable Box MAKING CONNECTIONS 23 Composite Connection Transmits analog video and audio signals from an external device to the TV. Connect the external device and the TV with the composite cable as shown in the following illustration. NOTE yIf you have a mono VCR, connect the audio cable from the VCR to the AUDIO L/MONO jack of the TV. Check to ensure the cables are matched with the corresponding color connection. y AV VIDEO AUDIO IN COMPONENT PR PB ENG ENGLISH YELLOW (Use the composite video cable provided.) RED WHITE YELLOW RED WHITE YELLOW (*Not Provided) RED WHITE YELLOW VIDEO L (MONO) AUDIO R VCR / DVD/ Blu-Ray / HD Cable Box 24 MAKING CONNECTIONS Connecting to a PC NOTE It is recommended to use the HDMI connection for the best image quality. y Depending on the graphics card, DOS mode video may not work if a HDMI to DVI Cable is in use. y In PC mode, there may be noise associated with the resolution, vertical pattern, contrast or y brightness. If noise is present, change the PC output to another resolution, change the refresh rate to another rate or adjust the brightness and contrast on the PICTURE menu until the picture is clear. The synchronization input form for Horizontal and Vertical frequencies is separate. y Depending on the graphics card, some resolution settings may not allow the image to be positioned y on the screen properly. HDMI Connection, DVI to HDMI Connection or RGB Connection Method A: HDMI Connection 4 (PC) Choose any HDMI input port to connect. It does not matter which port you use. HDMI IN (*Not Provided) SF 1(ARC) ENGLISH ENG Choose method A, B, or C to make connection. MAKING CONNECTIONS 25 4 (PC) Method B: DVI to HDMI Connection IN (*Not Provided) (RGB/HDMI-PC) (RGB/HDMI-PC) AUDIO AUDIO (*Not Provided) AUDIO OUT DVI OUT ENG ENGLISH SF Method C: RGB Connection (PC) (PC) RGB RGB AUDIO AUDIO (*Not Provided) (*Not Provided) RGB OUT (PC) (RGB/HDMI-PC) (RGB/HDMI-PC) AUDIO OUT SF 26 MAKING CONNECTIONS Connecting to an Audio System You may use an optional external audio system instead of the built-in speaker. NOTE If you use an optional external audio device instead of the built-in speaker, set the TV speaker feature y to off. Digital Optical Audio Connection Transmits a digital audio signal from the TV to an external device. Connect the external device and the TV with the optical audio cable as shown in the following illustration. NOTE Do not look into the optical output port. Looking at the laser beam may damage your vision. y Audio with ACP (Audio Copy Protection) function may block digital audio output. y ENGLISH ENG OUT OPTICAL DIGITAL AUDIO (*Not Provided) OPTICAL AUDIO IN Digital Audio System MAKING CONNECTIONS 27 Connecting to a USB Connect a USB storage device such as a USB flash memory, external hard drive, or a USB memory card reader to the TV and access the Smart Share menu to use various multimedia files. NOTE To use a USB Hub device, make sure that it is connected to the USB IN 2 USB port. y To store apps on a USB storage device, make sure that it is connected to the USB IN 3 USB Apps y port. Choose any USB input port to connect. It does not matter which port you use. USB IN USB ENG ENGLISH HDD IN 2 USB Hub 3 USB Apps (*Not Provided) 28 REMOTE CONTROL REMOTE CONTROL Magic Remote Control Functions When the message “Magic remote control battery is low. Change the battery.” is displayed, replace the battery. To replace batteries, open the battery cover, replace batteries (1.5 V AA) matching and ends to the label inside the compartment, and close the battery cover. Be sure to point the remote control at the remote control sensor on the TV. To remove the batteries, perform the installation actions in reverse. CAUTION Do not mix old and new batteries, as this may damage the remote control. y Make sure to point the remote control at the remote control sensor on the TV. Pointer (RF & Bluetooth transmitter) Blinks the light when operating. (POWER) Turns the TV on or off. ENGLISH ENG BACK Returns to the previous level. BACK HOME Home Accesses the Home menu. Navigation buttons (up/down/left/right) Scrolls through menus or options. Wheel (OK) Selects menus or options and confirms your input; Scrolls through the saved channels. If you press the navigation button while moving the pointer on the screen, the pointer disappears, and the Magic remote control works as a regular remote control. To display the pointer again, shake the Magic remote control from side to side. VOL CH MY APPS + VOL Adjusts the volume level. ^ CH v Scrolls through the saved channels. (MUTE) Mutes all sounds. MY APPS Shows the list of Apps. (User Guide) Sees User Guide. 79 %ULHI,QIR7LWOH7HVW $0 ᱈ L ,QIR If you press (Wheel) on the Magic remote control, the following screen appears. Shows information about the current program and screen. If you press (Wheel) on the Magic remote control, the following screen appears. Set the channel you want. You can press the CH button on the remote control to set the channel. If you move the Magic remote control to the bottom of the screen. You can select Quick Menu. REMOTE CONTROL Registering Magic Remote Control The Magic remote Control operates by pairing with your TV. Once you purchased the TV, please register the Magic remote control as follows; How to register the Magic Remote Control To register the remote control, press the (Wheel) button on the remote control. How to Re-register the Magic Remote Control after Registration Failure BACK HOME How to use Magic Remote Control 1 If the pointer disappears, move the remote control slightly to left or right. Then, it will automatically appear on the screen. »If the pointer has not been used for a certain period of time, it will disappear. 2 You can move the pointer by aiming the Pointer Receiver of the remote control at your TV then move it left, right, up or down. »If the pointer does not work properly after clicking the (Wheel) button, leave the remote control for 10 seconds then use it again. Precautions to Take when Using the Magic Remote Control Use the remote control within the maximum y communication distance (10 m, 32.8ft). Using the remote control beyond this distance, or with an object obstructing it, may cause a communication failure. A communication failure may occur due to y nearby devices. Electrical devices such as a microwave oven or wireless LAN product may cause interference, as these use the same bandwidth (2.4 GHz) as the Magic Remote Control. The Magic Remote Control may be damaged y or may malfunction if it is dropped or receives a heavy impact. Take care not to bump into nearby furniture y or other people when using the Magic Remote Control. Manufacturer and installer cannot provide y service related to human safety as the applicable wireless device has possibility of electric wave interference. It is recommended that an Access Point (AP) y be located more than 1 m (3.28 ft) away from the TV. If the AP is installed closer than 1 m (3.28 ft), the magic remote control may not perform as expected due to frequency interference. ENG ENGLISH 1 Press and hold the BACK and buttons together for 5 HOME seconds to reset, then register it by following “How to register the Magic remote control” above. (Once the reset is complete, the light on the Pointer blinks.) 2 To re-register the Magic remote control, press and hold the BACK button for 5 seconds toward the TV. (Once the reset is complete, the light on the Pointer blinks.) 29 30 WATCHING TV WATCHING TV Turning the TV on for the first time When you turn the TV on for the first time, the Initial setting screen appears. Select a language and customize the basic settings. 1 Connect the power cord to a power outlet. 2 In Standby mode, press the power button on NOTE Seleect Home* when prompted. Store* y mode puts the TV in demo mode. If you select Store*, the any customized y settings will switch back to the default settings of Store* in 5 minutes. The Power Indicator feature is disabled in y Store Demo mode. 4 When the basic settings are complete, press (Wheel). the remote control to turn the TV on. The Initial setting screen appears if you turn the TV on for the first time. NOTE You can also access Initial Setting by y accessing OPTION in the main menu. 3 Follow the on-screen instructions to customize NOTE If you do not complete the Initial setting, y it will appear whenever the TV turns on. Disconnect the power cord from the y power outlet when you do not use the TV for a long period of time. 5 To turn the TV off, press the power button on the remote control. ENGLISH ENG your TV settings according to your preferences. Language Selection* Selects a language to display. Ø Using the Magic remote Sets the Magic remote contol. control Ø Enviroment Selection Select Home* for the home environment. Ø Network Connection Ø Time Zone Setting Sets your network to enable network-related features on the TV. Selects the time zone and daylight saving. Ø Auto Tuning Scans and saves available channels automatically. Ø Auto Energy Saving Selects Auto Energy Saving mode. mode Setting Ø 3D-On-Start Setting Selects 3D-On-Start option. (For 3D TV) Ø Setting is complere. Confirms the setting options. USING THE USER GUIDE User Guide allows you to more easily access the detailed TV information. 1 Move the Magic remote control on the bottom of the screen. 2 Select SETTINGS and press (Wheel). 3 Move the Magic remote control, select SUPPORT and press (Wheel). 4 Move the Magic remote control, selectUser Guide and press (Wheel). NOTE You can also access the User Guide by y pressing (User Guide) in the remote control. ENTERTAINMENT ENTERTAINMENT 31 Network Connection Connecting to a wired network Connect the TV to a local area network (LAN) via the LAN port as shown in the following illustration and set up the network settings. After making a physical connection, a small number of home networks may require the TV network settings to be adjusted. For most home networks, the TV will connect automatically without any adjustments. For detail information, contact your internet provider or router manual. &RQQHFWLQJZLUHGQHWZRUN CAUTION Do not connect a modular phone cable to the y LAN port. Since there are various connection methods, y please follow the specifications of your telecommunication carrier or internet service provider. After connecting the LAN port, use the y Premium or LG Apps menu. ENG ENGLISH LAN (*Not Provided) External modem / Wall outlet / PC 32 ENTERTAINMENT To set up the network settings: (Even if your TV has already connected automatically, running setup again will not harm anything) 1 Press SETTINGS to access the Home menu. 2 Press the Navigation buttons to scroll to NETWORK. 3 Press the Navigation buttons to select Network Connection and press (Wheel). 4 Press the Navigation buttons to select IP Auto Setting or IP Manual Setting and press (Wheel). 1HWZRUN6HWWLQJ ,QVHUWWKH,3DGGUHVV ,30RGH ܁,30DQXDO6HWWLQJ۽ ENGLISH ENG ᯘ,3$GGUHVV ᯘ6XEQHW0DVN ᯘ*DWHZD\ '160RGH ᯘ'166HUYHU ,30DQXDO6HWWLQJ (QWHU ᰳ3UHYLRXV ᯙ1H[W - If selecting IP Manual Setting, press the Navigation and Number buttons. IP addresses will need to be input manually. - IP Auto Setting: Select this if there is a DHCP server (Router) on the local area network (LAN) via wired connection, the TV will automatically be allocated an IP address. If you’re using a broadband router or broadband modem that has a DHCP (Dynamic Host Configuration Protocol) server function. The IP address will automatically be determined. - IP Manual Setting: Select if there is no DHCP server on the network or you want to set the IP address manually. 4 When you are finished, press Enter. #NOTE If the network setting screen do not y appear automatically, press SETTINGS 䮫 NETWORK 䮫 Network Connection. If the network settings are not set correctly, y the functions or services that require the network connection may not work properly. If the options in Network Connection are not y set properly, check your Internet connection and contact your Internet service provider. To use Internet features on the TV, you must y have active broadband Internet connection at all times. If you cannot access the Internet, check the y network status of your computer. If the auto IP setting of the router y expires, when using IP Auto Setting, you may experience temporary network disconnection. Refer to the owner's manual of the router for details. ENTERTAINMENT 33 Connecting to a wireless network The LG Wireless LAN for Broadband/DLNA Adaptor allows the TV to connect to a wireless LAN network. The network configuration and connection method may vary depending on the equipment in use and the network environment. Refer to the setup instructions supplied with your access point or wireless router for detailed connection steps and network settings. The easiest method is the WPS button method (Third method in this section). Setting up the AP (Access Point) or the wireless router is required before connecting the TV to the network. Wireless line sharer ENG ENGLISH NOTE For enjoying pictures, music, or video stored y on a PC using the router, a wired connection or Wireless N (802.11n) connection is recommended. When the wireless port of the router is used, y there may be restrictions on some functions. It is recommended that the Access Point y (AP) be located more than 1 m (3.28 ft) away from the TV. If the AP is installed closer than 1 m, the magic motion remote control may not perform as expected due to frequency interference. 34 TROUBLESHOOTING TROUBLESHOOTING General Problem Resolution Cannot control the TV with the remote control. yCheck the remote control sensor on the product and try again. yCheck if there is any obstacle between the product and the remote control. to ). yCheck if the batteries are still working and properly installed ( to , No image display and no sound is produced. yCheck if the product is turned on. yCheck if the power cord is connected to a wall outlet. yCheck if there is a problem in the wall outlet by connecting other products. The TV turns off suddenly. yCheck the power control settings. The power supply may be interrupted. yCheck if the Auto sleep feature is activated in the Time settings. yIf there is no signal while the TV is on, the TV will turn off automatically after 15 minutes of inactivity. ENGLISH ENG OPEN SOURCE SOFTWARE NOTICE To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this product, please visit http://opensource.lge.com. In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download. SPECIFICATIONS 35 SPECIFICATIONS Product specifications may be changed without prior notice due to upgrade of product functions. Power requirement USA, Canada, Mexico: AC 120 V ~ 50 / 60 Hz Other Country: AC 100 - 240 V ~ 50 / 60 Hz Television System NTSC-M, ATSC, 64 & 256 QAM Program Coverage VHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV 1-135 External Antenna Impedance 75 Ω Environment condition Operating Temperature 0 - 40 °C Operating Humidity Less than 80 % Storage Temperature -20 - 60 °C Storage Humidity Less than 85 % MODELS Weight With stand 1171.9 mm x 770.9 mm x 289.8 mm 979.0 mm x 660.0 mm x 269.0 mm (46.1 inch x 30.3 inch x 11.4 inch) (38.5 inch x 25.9 inch x 10.5 inch) Without stand 1171.9 mm x 712.2 mm x 52.5 mm (46.1 inch x 28.0 inch x 2.0 inch) 979.0 mm x 593.0 mm x 35.5 mm (38.5 inch x 23.3 inch x 1.3 inch) With stand 29.8 kg (65.6 lbs) 15.1 kg (33.2 lbs) Without stand 27.5 kg (60.6 lbs) 12.7 kg (27.9 lbs) 0.7 A / 70 W 1.1 A / 110 W 47LS5700 (47LS5700-UA) 55LS5700 (55LS5700-UA) 47LS5750 (47LS5750-UB) 55LS5750 (55LS5750-UB) Current Value / Power consumption MODELS Dimensions (Width x Height x Depth) Weight 42LS5750 (42LS5750-UB) With stand 1089.0 mm x 720.0 mm x 269.0 mm 1171.9 mm x 770.9 mm x 289.8 mm (46.1 inch x 30.3 inch x 11.4 inch) (42.8 inch x 28.3 inch x 10.5 inch) Without stand 1089.0 mm x 655.0 mm x 35.5 mm (42.8 inch x 25.7 inch x 1.3 inch) 1171.9 mm x 712.2 mm x 52.5 mm (46.1 inch x 28.0 inch x 2.0 inch) With stand 17.8 kg (39.2 lbs) 29.8 kg (65.6 lbs) Without stand 15.4 kg (33.9 lbs) 27.5 kg (60.6 lbs) 1.4 A / 140 W 1.6 A / 160 W Current Value / Power consumption MODELS 60LS5700 (60LS5700-UA) 60LS5750 (60LS5750-UB) Dimensions (Width x Height x Depth) With stand 1232.0 mm x 795.0 mm x 54.5 mm (48.5 inch x 31.2 inch x 2.1 inch) Without stand 1232.0 mm x 716.0 mm x 54.5 mm (48.5 inch x 28.1 inch x 2.1 inch) Weight With stand 25.0 kg (55.1 lbs) Without stand 21.3 kg (46.9 lbs) Current Value / Power consumption 1.6 A / 160 W ENG ENGLISH Dimensions (Width x Height x Depth) 42LS5700 (42LS5700-UA) 32LS5700 (32LS5700-UA) 36 SPECIFICATIONS 47LM6200 (47LM6200-UE) MODELS 42LM6200 (42LM6200-UE) 47LM6210 (47LM6250-UD) 47LM6250 (47LM6250-UD) Dimensions (Width x Height x Depth) Weight With stand 1171.9 mm x 770.9 mm x 289.8 mm 1171.9 mm x 770.9 mm x 289.8 mm (46.1 inch x 30.3 inch x 11.4 inch) (46.1 inch x 30.3 inch x 11.4 inch) Without stand 1171.9 mm x 712.2 mm x 52.5 mm (46.1 inch x 28.0 inch x 2.0 inch) 1171.9 mm x 712.2 mm x 52.5 mm (46.1 inch x 28.0 inch x 2.0 inch) With stand 29.8 kg (65.6 lbs) 29.8 kg (65.6 lbs) Without stand 27.5 kg (60.6 lbs) 27.5 kg (60.6 lbs) 1.1 A / 110 W 1.4 A / 140 W Current Value / Power consumption 55LM6200 (55LM6200-UE) MODELS Dimensions (Width x Height x Depth) ENGLISH ENG Weight 55LM6250 (55LM6250-UD) 65LM6250 (65LM6250-UD) With stand 1390.8 mm x 905.2 mm x 334.7 mm (54.7 inch x 35.6 inch x 13.1 inch) 1171.9 mm x 770.9 mm x 289.8 mm (46.1 inch x 30.3 inch x 11.4 inch) Without stand 1390.8 mm x 835.5 mm x 52.5 mm (54.7 inch x 32.8 inch x 2.0 inch) 1171.9 mm x 712.2 mm x 52.5 mm (46.1 inch x 28.0 inch x 2.0 inch) With stand 42.6 kg (93.9 lbs) 29.8 kg (65.6 lbs) Without stand 38.5 kg (84.8 lbs) 27.5 kg (60.6 lbs) 1.6 A / 160 W 1.7 A / 170 W 47LM6400 (47LM6400-UA) 55LM6400 (55LM6400-UA) Current Value / Power consumption MODELS Dimensions (Width x Height x Depth) Weight 65LM6200 (65LM6200-UE) 55LM6210 (55LM6210-UD) With stand 1171.9 mm x 770.9 mm x 289.8 mm 1171.9 mm x 770.9 mm x 289.8 mm (46.1 inch x 30.3 inch x 11.4 inch) (46.1 inch x 30.3 inch x 11.4 inch) Without stand 1171.9 mm x 712.2 mm x 52.5 mm (46.1 inch x 28.0 inch x 2.0 inch) 1171.9 mm x 712.2 mm x 52.5 mm (46.1 inch x 28.0 inch x 2.0 inch) With stand 29.8 kg (65.6 lbs) 29.8 kg (65.6 lbs) Without stand 27.5 kg (60.6 lbs) 27.5 kg (60.6 lbs) 1.1 A / 110 W 1.4 A / 140 W Current Value / Power consumption MODELS 60LM6450 (60LM6450-UA) Dimensions (Width x Height x Depth) With stand 1232.0 mm x 795.0 mm x 54.5 mm (48.5 inch x 31.2 inch x 2.1 inch) Without stand 1232.0 mm x 716.0 mm x 54.5 mm (48.5 inch x 28.1 inch x 2.1 inch) Weight With stand 25.0 kg (55.1 lbs) Without stand 21.3 kg (46.9 lbs) Current Value / Power consumption 1.6 A / 160 W SPECIFICATIONS MODELS Dimensions (Width x Height x Depth) Weight 47LM6700 (47LM6700-UA) 42LM6700 (42LM6700-UA) 47LM6750 (47LM6750-UA) With stand 1171.9 mm x 770.9 mm x 289.8 mm 1063.0 mm x 701.0 mm x 263.0 mm (46.1 inch x 30.3 inch x 11.4 inch) (46.1 inch x 30.3 inch x 11.4 inch) Without stand 1171.9 mm x 712.2 mm x 52.5 mm (46.1 inch x 28.0 inch x 2.0 inch) 1063.0 mm x 628.0 mm x 33.4 mm (46.1 inch x 28.0 inch x 1.3 inch) With stand 29.8 kg (65.6 lbs) 29.8 kg (65.6 lbs) Without stand 27.5 kg (60.6 lbs) 27.5 kg (60.6 lbs) 1.1 A / 110 W 1.4 A / 140 W Current Value / Power consumption 55LM6700 (55LM6700-UA) MODELS 55LM6750 (55LM6750-UA) Dimensions (Width x Height x Depth) With stand 1232.0 mm x 795.0 mm x 331.0 mm (48.5 inch x 31.2 inch x 13.0 inch) Without stand 1232.0 mm x 723.0 mm x 33.6 mm (48.5 inch x 28.4 inch x 1.3 inch) Weight With stand 25.0 kg (55.1 lbs) Without stand 21.3 kg (46.9 lbs) MODELS Weight 1.6 A / 160 W 47LM7600 (47LM7600-UA) 55LM7600 (55LM7600-UA) With stand 1171.9 mm x 770.9 mm x 289.8 mm 1171.9 mm x 770.9 mm x 289.8 mm (46.1 inch x 30.3 inch x 11.4 inch) (46.1 inch x 30.3 inch x 11.4 inch) Without stand 1171.9 mm x 712.2 mm x 52.5 mm (46.1 inch x 28.0 inch x 2.0 inch) 1171.9 mm x 712.2 mm x 52.5 mm (46.1 inch x 28.0 inch x 2.0 inch) With stand 29.8 kg (65.6 lbs) 29.8 kg (65.6 lbs) Without stand 27.5 kg (60.6 lbs) 27.5 kg (60.6 lbs) 1.4 A / 140 W 1.6 A / 160 W Current Value / Power consumption ENG ENGLISH Current Value / Power consumption Dimensions (Width x Height x Depth) 37 38 SPECIFICATIONS Wireless LAN for Broadband/DLNA Adaptor SPEC This device only works with compatible LG TV. Standard IEEE802.11a/b/g/n Frequency Range 2402 to 2483 MHz 5150 to 5250 MHz 5725 to 5850 MHz Modulation CCK / OFDM / MIMO Output Power (Typical) 802.11a: 14 dBm 802.11b: 17 dBm 802.11g: 14 dBm 802.11n: 13 dBm Data rate 802.11a/g: 54 Mbps 802.11b: 11 Mbps 802.11n: 300 Mbps Antenna Gain (Typical) 2402 to 2483 MHz: 1.17 dBi 5150 to 5250 MHz: 4.67 dBi 5725 to 5850 MHz: 3.30 dBi Occupied bandwidth 802.11a/b/g: HT20 802.11n: HT20/40 Because band channel used by the country could be different, the user can not change or adjust the operating frequency and this product is set for the regional frequency table. FCC ID of Wi-Fi module inside TV y FCC ID: BEJTWFMB003D ENGLISH ENG RF module (BM-LDS302) specification For TV By using a 2.4 GHz bandwidth radio frequency(RF). Output: 10 dBm or lower y Maximum Communication Distance: Line of Open Sight approx. 10 m (30 ft) y Bandwidth: 2.4 GHz (2.400 GHz ~ 2.4835 GHz) y Transfer Rate: 3 Mbps y FCC ID of RF module inside TV y FCC ID: BEJLDS302 MAINTENANCE 39 MAINTENANCE Cleaning Your TV Clean your TV regularly to keep the best performance and to extend the product lifespan. CAUTION Make sure to turn the power off and y disconnect the power cord and all other cables first. When the TV is left unattended and unused y for a long time, disconnect the power cord from the wall outlet to prevent possible damage from lightning or power surges. Screen, frame, cabinet and stand CAUTION Do not push, rub, or hit the surface with y your fingernail or a sharp object, as this may result in scratches on the screen and image distortions. Do not use any chemicals, such as waxes, y benzene, alcohol, thinners, insecticides, air fresheners, lubricants, as these may damage the screen’s finish and cause discoloration. Do not spray liquid onto the surface. If water y enters the TV, it may result in fire, electric shock, or malfunction. Power cord Remove the accumulated dust or dirt on the power cord regularly. ENG ENGLISH To remove dust or light dirt, wipe the surface with a dry, clean, and soft cloth. To remove major dirt, wipe the surface with a soft cloth dampened in clean water or a diluted mild detergent. Then wipe immediately with a dry cloth. CHILD SAFETY: It Makes A Difference How and Where You Use Your Flat Panel Display Congratulations on your purchase! As you enjoy your new product, please keep these safety tips in mind: THE ISSUE y The home theater entertainment experience is a growing trend and larger flat panel displays are popular purchases. However, flat panel displays are not always supported on the proper stands or installed according to the manufacturer’s recommendations. y Flat panel displays that are inappropriately situated on dressers, bookcases, shelves, desks, speakers, chests or carts may fall over and cause injury. THIS MANUFACURER CARES! y The consumer electronics industry is committed to making home entertainment enjoyable and safe. TUNE INTO SAFETY y One size does NOT fit all. Follow the manufacturer’s recommendations for the safe installation and use of your flat panel display. y Carefully read and understand all enclosed instructions for proper use of this product. y Don’t allow children to climb on or play with furniture and television sets. y Don’t allow place flat panel displays on furniture that can easily be used as steps, such as a chest of drawers. y Remember that children can become excited while watching a program, especially on a “larger than life” flat panel display. Care should be taken to place or install the display where it cannot be pushed, pulled over, or knocked down. y Care should be taken to route all cords and cables connected to the flat panel display so that they cannot be pulled or grabbed by curious children. WALL MOUNTING: IF YOU DECIDE TO WALL MOUNT YOUR FLAT PANEL DISPLAY, ALWAYS: y Use a mount that has been recommended by the display manufacturer and/or listed by an independent laboratory (such as UL, CSA, ETL). y Follow all instructions supplied by the display and wall mount manufacturers. y If you have any doubts about your ability to safely install your flat panel display, contact your retailer about professional installation. y Make sure that the wall where you are mounting the display is appropriate. Some wall mounts are not designed to be mounted to walls with steel studs or old cinder block construction. If you are unsure, contact a professional installer. y A minimum of two people are required for installation. Flat panel displays can be heavy LG Customer Information Center For inquires or comments, visit www.lg.com or call; 1-800-243-0000 1-888-865-3026 1-888-542-2623 USA, Consumer User USA, Commercial User CANADA Register your product Online! www.lg.com The model and serial number of the TV is located on the back and/or one side of the TV. Record it below should you ever need service. MODEL SERIAL (For LS5700/LM6700/LM7600 series, 42/47/55LS5750, 42/47/55LM6200 USA, Canada, Mexico) This product qualifies for ENERGY STAR in the “factory default (Home Use)” setting. Changing the factory default settings or enabling other features may increase power consumption that could exceed the limits necessary to quality for ENERGY STAR. Regulatory Information cont. FCC Compliance Statement respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada. This equipment has been tested and found to comply within the limits of a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. NOTICE The regulations are applied only to the products with the ID LABEL indicating specific requirements. CE Conformity Notice (for Europe) This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. Products with the “CE” Marking comply with the EMC Directive(89/336/EEC) and LOW VOLTAGE Directive (73/23/EEC) issued by the Commission of the European Community. Compiance with these directives implies conformity to the following European Norms : • EN 55022 ; Radio Frequency Interference • EN 55024 ; Electromagnetic Immunity • EN 61000-3-2 ; Power Line Harmonics • EN 61000-3-3 ; Voltage Fluctuations • EN 60950-1 ; Product Safety If this equipment does cause harmful interference to radio or television reception (which can be determined by turning the equipment on and off), the user is encouraged to try to correct the interference by using one or more of the following measures: NOTICE The regulations are applied only to the products with the ID LABEL indicating specific requirements. Reorient or relocate the receiving antenna. Increase the separation between the equipment and the receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Low Radiation Compliance (MPR II) This monitor meets one of the strictest guidelines available today for low radiation emissions, offering the user extra shielding and an antistatic screen coating. These guidelines, set forth by a government agency in Sweden, limit the amount of emission allowed in the Extremely Low Frequency (ELF) and Very Low Frequency (VLF) electromagnetic range. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's (or your) authority to operate the equipment. Only peripherals (digital input/output devices, terminals, printers, etc.) certified to comply with the Class B limits may be attached to this monitor. Operation with non-certified peripherals is likely to result in interference to radio and TV reception. Only shielded signal cables may be used with this System. TCO'99 (TCO'99 applied model only) NOTICE The regulations are applied only to the products with the ID LABEL indicating specific requirements. Congratulations! You have just purchased a TCO’99 approved and labelled product! Your choice has provided you with a product developed for professional use. Your purchase has also contributed to reducing the burden on the environment and also to the further development of environmentally adapted electronics products. Canadian DOC Notice This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numérique de la classe B 01 Regulatory Information cont. Why do we have environmentally labelled computers? In many countries, environmental labelling has become an established method for encouraging the adaptation of goods and services to the environment. With the growing manufacture and usage of electronic equipment throughout the world, there is a recognized concern for the materials and substances used by electronic products with regards to their eventual recycling and disposal. By proper selection of these materials and substances, the impact on the environment can be minimized. visual ergonomics. Below you will find a brief summary of the ecological requirements met by this product. The complete ecological criteria document can be found at TCO Development’s website http://www.tcodevelopment.com or may be ordered from: TCO Development SE-114 94 STOCKHOLM, Sweden Fax: +46 8 782 92 07 Email : development@tco.se Information regarding TCO’99 approved and labelled products may also be obtained at http://www.tcodevelopment.com There are also other characteristics of a computer, such as energy consumption levels, that are important from the viewpoints of both the work (internal) and natural (external) environments. Electronic equipment in offices is often left running continuously, resulting in unnecessary consumption of large amounts of energy and additional power generation. From the standpoint of carbon dioxide emissions alone, it is vital to save energy. Ecological requirements Flame retardants Flame retardants may be present in printed wiring board laminates, cables, and housings. Their purpose is to prevent, or at least to delay the spread of fire. Up to 30% by weight of the plastic in a computer casing can consist of flame retardant substances. Many flame retardants contain bromine or chlorine, and these flame retardants are chemically related to PCBs (polychlorinated biphenyls). Both the flame retardants containing bromine or chlorine and the PCBs are suspected of giving rise to health effects, including reproductive damage in fisheating birds and mammals, due to the bio-accumulative* processes when not disposed of in accordance with strict standards for disposal. What does labelling involve? The product meets the requirements for the TCO’99 scheme which provides for international and environmental labelling of personal computers and/or displays. The labelling scheme was developed as a joint effort by the TCO (The Swedish Confederation of Professional Employees), Svenska Naturskyddsforeningen (The Swedish Society for Nature Conservation) and Statens Energimyndighet (The Swedish National Energy Administration). Approval requirements cover a wide range of issues: ecology, ergonomics, emission of electrical and magnetical fields, energy consumption and electrical safety. TCO’99 requires that plastic components weighing more than 25 grams shall not contain flame retardants with organically bound bromine or chlorine. Flame retardants are allowed in the printed wiring board laminates due to the lack of commercially available alternatives. Ecological criteria impose restrictions on the presence and use of heavy metals, brominated and chlorinated flame retardants, and other substances. The product must be prepared for recycling and the manufacturing site(s) shall be certified according to ISO14001 or EMAS registered. Cadmium** Cadmium is present in rechargeable batteries and in the colour-generating layers of certain computer displays. TCO’99 requires that batteries, the colour-generating layers of display screens, and the electrical or electronics components shall not contain any cadmium. Energy requirements include a demand that the system unit and/or display, after a certain period of inactivity, shall reduce its power consumption to a lower level in one or more stages. The length of time to reactivate the system unit shall be reasonable for the user. Mercury** Mercury is sometimes found in batteries, relays and switches. TCO’99 requires that batteries shall not contain any mercury. It also demands that mercury is not present in any of the electrical or electronics components associated with the labelled unit. There is however one Labelled products must meet strict environmental demands, for example, in respect of the reduction of electrical and magnetical fields as well as work load and 02 Regulatory Information cont. • exception. Mercury is, for the time being, permitted in the back light system of flat panel monitors as there today is no commercially available alternative. TCO aims on removing this exception when a mercury free alternative is available. Noise emissions Ecology • The product must be prepared for recycling and the manufacturer must have a certified environmental management system such as EMAS or ISO 14 001 • Restrictions on chlorinated and brominated flame retardants and polymers heavy metals such as cadmium, mercury and lead. Lead** Lead can be found in picture tubes, display screens, solders and capacitors. TCO’99 permits the use of lead due to the lack of commercially available alternatives, but in future requirements TCO Development aims at restricting the use of lead. _____________________________________________ The requirements included in this label have been developed by TCO Development in co-operation with scientists, experts, users as well as manufacturers all over the world. Since the end of the 1980s TCO has been involved in influencing the development of IT equipment in a more user-friendly direction. Our labelling system started with displays in 1992 and is now requested by users and IT-manufacturers all over the world. * Bio-accumulative is defined as substances which accumulate in living organisms. **Lead, Cadmium and Mercury are heavy metals which are bio-accumulative. TCO’03 (TCO’03 applied model only) For more information, please visit www.tcodevelopment.com English Congratulations! The display you have just purchased carries the TCO’03 Displays label. This means that your display is designed,manufactured and tested according to some of the strictest quality and environmental requirements in the world. This makes for a high performance product, designed with the user in focus that also minimizes the impact on our natural environment. Some of the features of the TCO’03 Display requirements: Information for Environmental Preservation LGE. announced the 'LG Declaration for a Cleaner Environment' in 1994, and this ideal has served as a guiding managerial principle ever since. The Declaration is a foundation that has allowed us to undertake environmentally friendly activities in careful consideration of economic, environmental, and social aspects. We promote activities for environmental preservation, and we specifically develop our products to embrace the concept of environment-friendly. We minimize the hazardous materials contained in our products. For example, there is no cadmium to be found in our monitors. Ergonomics • Good visual ergonomics and image quality in order to improve the working environment for the user and to reduce sight and strain problems. Important parameters are luminance, contrast, resolution, reflectance, colour rendition and image stability. Information for recycling This monitor may contain parts which could be hazardous to the environment. It is important that this monitor be recycled after use. Energy • Energy-saving mode after a certain time – beneficial both for the user and the environment • Electrical safety LGE. handles all waste monitors through an environmentally acceptable recycling method. There are several take-back and recycling systems currently in Emissions • Electromagnetic fields 03 Regulatory Information cont. operation worldwide. Many parts will be reused and recycled, while harmful substances and heavy metals are treated by an environmentally friendly method. If you want to find out more information about our recycling program, please contact your local LG vendor or a corporate representative of LG. Wir richten unsere Firmenpolitik auf eine sauberere Umwelt hin aus, indem wir umweltspezifische Aspekte als wichtigen Punkt in die Weiterentwicklung unseres Unternehmens einfließen lassen. Zusätzliche Informationen über unsere ‘grüne’ Firmenpolitik erhalten Sie auf unserer Website. http://www.lge.com/about/environment/html/Recycling.jsp We set our vision and policies on a cleaner world by selecting the issue of the global environment as a task for corporate improvement. Please visit our website for more information about our ‘green’ policies. http://www.lge.com/about/environment/html/Recycling.jsp Français Information sur la protection del’environnement LGE. a publié sa 'Déclaration en faveur d’un environnement plus propre' en 1994 et celle-ci est restée, depuis lors, un principe directeur de notre entreprise. Cette déclaration a servi de base à notre réflexion et nous a permis de prendre en compte à la fois les aspects économiques et sociaux de nos activités, tout en respectant l’environnement. Deutsch Informationen zur Erhaltung der Umwelt Im Jahr 1994 verkündete LGE die 'LG Declaration for a Cleaner Environment' (LG Erklärung für eine sauberere Umwelt). Seitdem dient dieses Ideal als führendes Prinzip des Unternehmens. Diese Erklärung war die Basis für die Durchführung von umweltfreundlichen Aktivitäten, wobei wirtschaftliche, umweltbezogene und soziale Aspekte in die Überlegungen mit einbezogen wurden. Wir fördern Aktivitäten zum Schutz der Umwelt und die Entwicklung unserer Produkte ist darauf ausgerichtet, unserem Konzept bezüglich Umweltfreundlichkeit gerecht zu werden. Wir sind darauf bedacht, den Anteil der in unseren Produkten enthaltenen schädlichen Materialien zu minimieren. So ist in unseren Monitoren beispielsweise kein Kadmium zu finden. Nous encourageons les activités en faveur de la préservation de l’environnement et c’est dans cet esprit que nous développons nos produits : nous réduisons au minimum les matières dangereuses qui entrent dans leur composition et l’on ne trouve pas de cadmium, par exemple, dans nos moniteurs. Information sur le recyclage Ce moniteur peut contenir des composants qui présentent un risque pour l’environnement. Il est donc important que celui-ci soit recyclé après usage. LGE. traite les moniteurs en fin de cycle conformément à une méthode de recyclage respectueuse de l’environnement. Nous reprenons nos produits et les recyclons dans plusieurs sites répartis dans le monde entier. De nombreux composants sont réutilisés et recyclés, et les matières dangereuses, ainsi que les métaux lourds, sont traités selon un procédé écologique. Si vous souhaitez plus de renseignements sur notre programme de recyclage, veuillez contacter votre revendeur LG ou un l’un de nos représentants. Informationen zum Thema Recycling Dieser Monitor enthält Teile, die umweltschädlich sein können. Es ist unbedingt erforderlich, dass der Monitor recycelt wird, nachdem er außer Dienst gestellt wurde. Bei LGE. werden alle ausrangierten Monitore in einem unter umweltbezogenen Aspekten geeigneten Verfahren recycelt. Augenblicklich sind weltweit mehrere Rücknahme- und Recyclingsysteme im Einsatz. Viele Teile werden wieder verwendet und recycelt. Schädliche Substanzen und Schwermetalle werden durch umweltverträgliche Verfahren behandelt. Falls Sie mehr über unser Recyclingprogramm erfahren möchten, wenden Sie sich bitte an Ihren lokalen LGHändler oder einen Unternehmensvertreter von LG. Nous voulons agir pour un monde plus propre et croyons au rôle de notre entreprise dans l’amélioration de l’environnement. Pour plus de renseignements sur notre politique “verte”, rendez visite à notre site : http://www.lge.com/about/environment/html/Recycling.jsp 04 Regulatory Information cont. Italiano respetan el medio ambiente siempre teniendo en cuenta aspectos sociales, económicos y medioambientales. Informazioni per la tutela dell’ambiente La LGE. ha annunciato nel 1994 la cosiddetta 'LG Declaration for a Cleaner Environment' (Dichiarazione di LG a favore di un ambiente più pulito), un ideale che da allora funge da principio ispiratore della gestione aziendale. La dichiarazione rappresenta il fondamento che consente di intraprendere attività a favore dell'ambiente tenendo conto degli aspetti economici, ambientali e sociali.Noi della LG, promuoviamo attività a favore della tutela dell'ambiente sviluppando appositamente i nostri prodotti per cogliere il concetto del rispetto dell’ambiente riducendo i materiali dannosi presenti nei nostri prodotti. Ad esempio nei nostri monitor non è presente il cadmio. Promocionamos actividades orientadas a la conservación del medio ambiente y desarrollamos nuestros productos específicamente para que se ajusten a la filosofía que protege el entorno. Reducimos al máximo el uso de materiales de riesgo en nuestros productos. Un ejemplo de ello es la ausencia total de cadmio en nuestros monitores. Información para el reciclaje Este monitor puede contener piezas que entrañen riesgos medioambientales. Es importante reciclar este monitor después de su utilización. LGE. trata todos los monitores usados siguiendo un método de reciclaje que no daña al entorno. Contamos con diversos sistemas de recuperación y reciclaje que funcionan a nivel mundial en la actualidad. Es posible reciclar y reutilizar muchas de las piezas, mientras que las sustancias dañinas y los metales pesados se tratan siguiendo un método que no perjudique al medio ambiente. Si desea obtener más información acerca del programa de reciclaje, póngase en contacto con su proveedor local de LG o con un representante empresarial de nuestra marca. Informazioni per il riciclaggio Il monitor può presentare componenti che potrebbero risultare eventualmente dannosi per l'ambiente. È importante che il monitor sia riciclato al termine del suo utilizzo. La LGE. gestisce tutti i monitor di rifiuto con un metodo di riciclaggio soddisfacente dal punto di vista ambientale. In tutto il mondo sono attualmente in funzione numerosi sistemi di riciclaggio e recupero. I diversi componenti sono riutilizzati e riciclati, mentre le sostanze dannose e i metalli pesanti vengono trattati con un metodo rispettoso dell’ambiente. Se si desiderano maggiori informazioni in merito al programma di riciclaggio, è consigliabile rivolgersi al proprio rivenditore LG o ad un rappresentante aziendale della LG. Basamos nuestra visión y nuestras políticas en un mundo más limpio y para ellos optamos por un entorno global como tarea principal de nuestra evolución como empresa. Visite nuestra página Web para obtener más información sobre nuestras políticas ecológicas. http://www.lge.com/about/environment/html/Recycling.jsp Noi della LG impostiamo la nostra visione e le nostre politiche a favore di un mondo più pulito ponendo la questione dell'ambiente dal punto di vista globale come una mansione rivolta al miglioramento della nostra azienda. Vi invitiamo a visitare il nostro sito internet per ulteriori informazioni sulla nostra politica “verde”. http://www.lge.com/about/environment/html/Recycling.jsp Português Informações relacionadas à preservação ambiental A LGE. anunciou a 'LG Declaration for a Cleaner Environment' (Declaração da LG para um ambiente mais limpo) em 1994 e esse ideal tem servido desde então como um princípio administrativo de orientação. A Declaração é a base que nos tem permitido realizar atividades favoráveis ao ambiente com consideração atenta aos aspectos econômicos, ambientais e sociais. Espanõl Información para la conservación medioambiental LGE. presentó la 'Declaración para un entorno más limpio de LG' en 1994 y este ideal ha servido para guiar nuestros principios empresariales desde entonces. La Declaración es la base que nos ha permitido llevar a cabo tareas que Promovemos atividades de preservação ambiental e desenvolvemos nossos produtos para englobar 05 Regulatory Information cont. especificamente o conceito de favorável ao ambiente. Reduzimos os materiais perigosos contidos em nossos produtos. Por exemplo, não há cádmio em nossos monitores. Informatie met betrekking tot recycling Deze monitor bevat materialen die schadelijk zouden kunnen zijn voor het milieu. Het is belangrijk dat deze monitor aan het einde van zijn levensduur wordt gerecycled. Informações relacionadas à reciclagem Este monitor pode conter peças que podem representar riscos ao ambiente. É importante que ele seja reciclado após o uso. LGE. verwerkt alle afvalmonitors via een milieuvriendelijke recyclingmethode. Hiervoor worden er momenteel wereldwijd verscheidene inname- en recyclingsystemen gehanteerd. Een groot aantal onderdelen wordt opnieuw gebruikt en gerecycled, waarbij schadelijke stoffen en zware metalen volgens een milieuvriendelijke methode worden verwerkt. Voor meer informatie over ons recyclingprogramma kunt u contact opnemen met uw plaatselijke LGvertegenwoordiger of een LG-vestiging. A LGE. cuida de todos os monitores descartados através de um método de reciclagem agradável ao ambiente. Há vários sistemas de devolução e reciclagem atualmente em operação no mundo. Muitas peças serão reutilizadas e recicladas e as substâncias nocivas e os metais pesados passarão por tratamento através de um método favorável ao ambiente. Para obter mais informações sobre nosso programa de reciclagem, entre em contato com seu fornecedor LG local ou com um representante corporativo da LG. Definimos nossa visão e nossas políticas relacionadas a um mundo mais limpo selecionando a questão do ambiente global como uma tarefa de aprimoramento corporativo. Visite nosso site para obter mais informações sobre nossas políticas de meio ambiente. http://www.lge.com/about/environment/html/Recycling.jsp Onze visie en ons beleid met betrekking tot een schonere wereld vloeien voort uit het feit dat wij het milieu hebben aangemerkt als een onderwerp dat speciale aandacht verdient binnen onze onderneming. Bezoek onze website voor meer informatie over ons 'groene' beleid. http://www.lge.com/about/environment/html/Recycling.jsp Russian »ÌÙÓχˆËˇ ÔÓ Óı‡Ì ÓÍÛʇ˛˘ÂÈ Ò‰˚ Nederlands ¬ 1994 „Ó‰Û ÍÓÔÓ‡ˆËˇ LGE ÓÔÛ·ÎËÍÓ‚‡Î‡ 'ƒÂÍ·‡ˆË˛ LG ÔÓ Óı‡Ì ÓÍÛʇ˛˘ÂÈ Ò‰˚', ÍÓÚÓ‡ˇ Ò ÚÂı ÔÓ ÒÎÛÊËÚ ÓÒÌÓ‚Ì˚Ï ÔË̈ËÔÓÏ ÛÔ‡‚ÎÂÌˡ. Õ‡ ÓÒÌÓ‚Â ˝ÚÓÈ ‰ÂÍ·‡ˆËË Ï˚ ÒÏÓ„ÎË Ô‰ÔËÌˇÚ¸ ‰ÂÈÒڂˡ, Ó·ÂÒÔ˜˂‡˛˘Ë ·ÂÁÓÔ‡ÒÌÓÒÚ¸ ÓÍÛʇ˛˘ÂÈ Ò‰˚, Û‰ÂΡˇ ÔË ˝ÚÓÏ ‰ÓÎÊÌÓ ‚ÌËχÌË ˝ÍÓÌÓÏ˘ÂÒÍËÏ, ˝ÍÓÎӄ˘ÂÒÍËÏ Ë ÒӈˇθÌ˚Ï ‡ÒÔÂÍÚ‡Ï. Informatie met betrekking tot het behoud van het milieu LGE. publiceerde in 1994 de 'LG Declaration for a Cleaner Environment' (de LG-verklaring met betrekking tot een schoner milieu). Deze verklaring en het ideaal van een schoner milieu fungeren sindsdien als een bestuurlijke leidraad voor onze onderneming. Op basis van deze verklaring ontplooien wij milieuvriendelijke activiteiten, waarbij er zowel met sociale en economische aspecten, als met milieuaspecten zorgvuldig rekening wordt gehouden. Ã˚ ÒÚËÏÛÎËÛÂÏ ‰ÂˇÚÂθÌÓÒÚ¸ ÔÓ Óı‡Ì ÓÍÛʇ˛˘ÂÈ Ò‰˚, Û‰ÂΡˇ ÓÒÓ·Ó ‚ÌËχÌË ‡Á‡·ÓÚÍ ̇¯ÂÈ ÔÓ‰Û͈ËË ‚ ÒÓÓÚ‚ÂÚÒÚ‚ËË Ò ÍÓ̈ÂÔˆËÂÈ ˝ÍÓÎӄ˘ÂÒÍÓÈ ·ÂÁÓÔ‡ÒÌÓÒÚË. Ã˚ Ò‚Ó‰ËÏ Í ÏËÌËÏÛÏÛ ÒÓ‰ÂʇÌË ÓÔ‡ÒÌ˚ı ‚¢ÂÒÚ‚ ‚ ̇¯ÂÈ ÔÓ‰Û͈ËË. Õ‡ÔËÏÂ, ‚ ̇¯Ëı ÏÓÌËÚÓ‡ı ‚˚ Ì ̇ȉÂÚ ͇‰Ïˡ. Wij ondersteunen activiteiten die zijn gericht op het behoud van het milieu en wij houden bij het ontwikkelen onze producten specifiek rekening met de milieuvriendelijkheid van onze producten. Wij minimaliseren het gebruik van schadelijke stoffen in onze producten. Er wordt bijvoorbeeld geen cadmium verwerkt in onze monitors. »ÌÙÓχˆËˇ ÔÓ ÛÚËÎËÁ‡ˆËË ÓÚıÓ‰Ó‚ ›ÚÓÚ ÏÓÌËÚÓ ÏÓÊÂÚ ÒÓ‰Âʇڸ ÍÓÏÔÓÌÂÌÚ˚, ÍÓÚÓ˚ ÏÓ„ÛÚ Ì‡ÌÂÒÚË Û˘Â· ÓÍÛʇ˛˘ÂÈ Ò‰Â. 06 Regulatory Information cont. ÕÂÓ·ıÓ‰ËÏÓ ÛÚËÎËÁËÓ‚‡Ú¸ ÏÓÌËÚÓ ÔÓÒΠËÒÔÓθÁÓ‚‡Ìˡ. KÓÔÓ‡ˆËˇ LGE Ô‡·‡Ú˚‚‡ÂÚ ‚Ò ·‡ÍÓ‚‡ÌÌ˚ ÏÓÌËÚÓ˚ Ò ÔÓÏÓ˘¸˛ ˝ÍÓÎӄ˘ÂÒÍË ÔËÂÏÎÂÏÓ„Ó ÏÂÚÓ‰‡ ÛÚËÎËÁ‡ˆËË ÓÚıÓ‰Ó‚. œÓ ‚ÒÂÏÛ ÏËÛ ‰ÂÈÒÚ‚Û˛Ú ÒËÒÚÂÏ˚ ÛÚËÎËÁ‡ˆËË ÓÚıÓ‰Ó‚ Ë ‚ÓÁ‚‡Ú‡ ËÒÔÓθÁÓ‚‡ÌÌÓÈ ÔÓ‰Û͈ËË. ÃÌÓ„Ë ÍÓÏÔÓÌÂÌÚ˚ ·Û‰ÛÚ ‚ÚÓ˘ÌÓ ËÒÔÓθÁÓ‚‡Ì˚ Ë ÛÚËÎËÁËÓ‚‡Ì˚, ‚ ÚÓ ‚ÂÏˇ Í‡Í ‚‰Ì˚ ‚¢ÂÒÚ‚‡ Ë ÚˇÊÂÎ˚ ÏÂÚ‡ÎÎ˚ ·Û‰ÛÚ Ó·‡·ÓÚ‡Ì˚ Ò ÔÓÏÓ˘¸˛ ˝ÍÓÎӄ˘ÂÒÍË ÔËÂÏÎÂÏÓ„Ó ÏÂÚÓ‰‡. «‡ ·ÓΠÔÓ‰Ó·ÌÓÈ ËÌÙÓχˆËÂÈ ÔÓ Ì‡¯ÂÈ ÔÓ„‡ÏÏ ÛÚËÎËÁ‡ˆËË ÓÚıÓ‰Ó‚ Ó·‡˘‡ÈÚÂÒ¸ Í ÏÂÒÚÌÓÏÛ ÔÓÒÚ‡‚˘ËÍÛ ËÎË Ô‰ÒÚ‡‚ËÚÂβ ÍÓÔÓ‡ˆËË LG. Ã˚ ÓËÂÌÚËÛÂÏÒˇ ̇ Ó·ÂÒÔ˜ÂÌË ˝ÍÓÎӄ˘ÂÒÍÓÈ ·ÂÁÓÔ‡ÒÌÓÒÚË, ÒÚ‡‚ˇ Ò· ˆÂθ˛ „ÎÓ·‡Î¸ÌÛ˛ Á‡˘ËÚÛ ÓÍÛʇ˛˘ÂÈ Ò‰˚. ƒÓÔÓÎÌËÚÂθÌÛ˛ ËÌÙÓχˆË˛ Ó Ì‡¯ÂÈ ÔÓÎËÚËÍ ÔÓ Óı‡Ì ÓÍÛʇ˛˘ÂÈ Ò‰˚ ‚˚ ÏÓÊÂÚ ̇ÈÚË Ì‡ ̇¯ÂÏ Ò‡ÈÚÂ: http://www.lge.com/about/environment/html/Recycling.jsp EPA (EPA applied model only) ENERGY STAR is a set of power-saving guidelines issued by the U.S. Environmental Protection Agency(EPA). As an ENERGY STAR Partner LGE U. S. A.,Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency. NOM MARK (Mexico only) 07 Regulatory Information cont. WEEE un bidone della spazzatura barrato da una croce significa che il prodotto è coperto dalla direttiva europea 2002/96/EC. 2.Tutti i prodotti elettrici ed elettronici dovrebbero essere smaltiti separatamente rispetto alla raccolta differenziata municipale, mediante impianti di raccolta specifici designati dal governo o dalle autorità locali. 3.Il corretto smaltimento delle apparecchiature obsolete contribuisce a prevenire possibili conseguenze negative sulla salute umana e sull'ambiente. 4.Per informazioni più dettagliate sullo smaltimento delle apparecchiature obsolete, contattare il comune, il servizio di smaltimento rifiuti o il negozio in cui è stato acquistato il prodotto. (for Europe ) English Disposal of your old appliance 1.When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC. 2.All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities. 3.The correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health. 4.For more detailed information about disposal of your old appliance, please contact your city office, waste disposal service or the shop where you purchased the product. Swedish Kassering av din gamla apparat 1.När den här symbolen med en överkryssad soptunna på hjul sitter på en produkt innebär det att den regleras av European Directive 2002/96/EC. 2.Alla elektriska och elektroniska produkter bör kasseras via andra vägar än de som finns för hushållsavfall, helst via för ändamålet avsedda uppsamlingsanläggningar som myndigheterna utser. 3.Om du kasserar din gamla apparat på rätt sätt så bidrar du till att förhindra negativa konsekvenser för miljön och människors hälsa. 4.Mer detaljerad information om kassering av din gamla apparat kan får av kommunen, renhållningsverket eller den butik där du köpte produkten. French Élimination de votre ancien appareil 1.Ce symbole, représentant une poubelle sur roulettes barrée d'une croix, signifie que le produit est couvert par la directive européenne 2002/96/EC. 2.Les éléments électriques et électroniques doivent être jetés séparément, dans les videordures prévus à cet effet par votre municipalité. 3.Une élimination conforme aux instructions aidera à réduire les conséquences négatives et risques éventuels pour l'environnement et la santé humaine. 4.Pour plus d'information concernant l'élimination de votre ancien appareil, veuillez contacter votre mairie, le service des ordures ménagères ou encore la magasin où vous avez acheté ce produit. Dutch Uw oude toestel wegdoen 1.Als het symbool met de doorgekruiste verrijdbare afvalbak op een product staat, betekent dit dat het product valt onder de Europese Richtlijn 2002/96/EC. 2.Elektrische en elektronische producten mogen niet worden meegegeven met het huishoudelijk afval, maar moeten worden ingeleverd bij speciale inzamelingspunten die door de lokale of landelijke overheid zijn aangewezen. 3.De correcte verwijdering van uw oude toestel helpt negatieve gevolgen voor het milieu en de menselijke gezondheid voorkomen. Italian Smaltimento delle apparecchiature obsolete 1.Quando su un prodotto è riportato il simbolo di 08 Regulatory Information cont. 4.Wilt u meer informatie over de verwijdering van uw oude toestel? Neem dan contact op met uw gemeente, de afvalophaaldienst of de winkel waar u het product hebt gekocht. eller de lokale myndigheder. 3.Korrekt bortskaffelse af dit gamle apparat er med til at forhindre mulige skadevirkninger på miljøet og menneskelig sundhed. 4.Mere detaljerede oplysninger om bortskaffelse af dit gamle apparat kan fås ved at kontakte dit lokale kommunekontor, renovationsselskab eller den butik, hvor du købte produktet. Finnish Vanhojen laitteiden hävittäminen 1.Tämä merkki tuotteessa tarkoittaa, että tuote kuuluu sähkö- ja elektroniikkalaiteromusta annetun EU-direktiivin 2002/96/EY soveltamisalaan. 2.Kaikki elektroniset laitteet ovat ongelmajätettä, joten ne on toimitettava paikalliseen keräyspisteeseen. 3.Vanhan laitteen asianmukainen hävittäminen ehkäisee mahdollisia ympäristöön ja terveyteen kohdistuvia haittavaikutuksia. 4.Lisätietoa vanhan laitteen hävittämisestä saat ottamalla yhteyden paikallisiin viranomaisiin, kierrätyskeskukseen tai myymälään, josta ostit laitteen. Greek ∞fiÚÚÈ„Ë Ù˘ ·ÏÈ¿˜ Û·˜ Û˘Û΢‹˜ 1.ŸÙ·Ó ¤Ó· ÚÔ˚fiÓ ‰È·ı¤ÙÂÈ ÙÔ ‰‡Ì‚ÔÏÔ ÂÓfi˜ ‰È·ÁÚ·Ì̤ÓÔ˘ οϷıÔ˘ ·ÔÚÚÈÌÌ¿ÙˆÓ, ÙfiÙ ÙÔ ÚÔ˚fiÓ Î·Ï‡ÙÂÙ·È ·fi ÙËÓ E˘Úˆ·˚΋ O‰ËÁ›· 2002/96/EOK. 2.H ·fiÚÚÈ„Ë fiÏˆÓ ÙˆÓ ËÏÂÎÙÚÈÎÒÓ Î·È ËÏÂÎÙÚÔÓÈÎÒÓ ÚÔ˚fiÓÙˆÓ Ú¤ÂÈ Ó· Á›ÓÂÙ·È ¯ˆÚÈÛÙ¿ ·fi Ù· ÁÂÓÈο ÔÈÎȷο ·ÔÚÚ›ÌÌ·Ù· ̤ۈ ηıÔÚÈÛÌ¤ÓˆÓ ÂÁηٷÛÙ¿ÛÂˆÓ Û˘ÏÏÔÁ‹˜ ·ÔÚÚÈÌÌ¿ÙˆÓ, ÔÈ Ôԛ˜ ¤¯Ô˘Ó ‰ËÌÈÔ˘ÚÁËı› ›Ù ·fi ÙËÓ Î˘‚¤ÚÓËÛË ‹ ·fi ÙȘ ÙÔÈΤ˜ ·Ú¯¤˜. 3.H ÛˆÛÙ‹ ·fiÚÚÈ„Ë Ù˘ ·ÏÈ¿˜ Û·˜ Û˘Û΢‹˜ ı· ‚ÔËı‹ÛÂÈ ÛÙËÓ ·ÔÙÚÔ‹ Èı·ÓÒÓ ·ÚÓËÙÈÎÒÓ Û˘ÓÂÈÒÓ ˆ˜ ÚÔ˜ ÙÔ ÂÚÈ‚¿ÏÏÔÓ Î·È ÙËÓ ˘Á›· ÙÔ˘ ·ÓıÚÒÔ˘. 4.°È· ÈÔ ÏÂÙÔÌÂÚ›˜ ÏËÚÔÊÔڛ˜ Û¯ÂÙÈο Ì ÙËÓ ·fiÚÚÈ„Ë Ù˘ ·ÏÈ¿˜ Û·˜ Û˘Û΢‹˜, ÂÈÎÔÈÓˆÓ‹ÛÙ Ì ÙÔ ·ÚÌfi‰›Ô ÙÔÈÎfi ÁÚ·Ê›Ô, ˘ËÚÂÛ›· ‰È¿ıÂÛ˘ ÔÈÎÈ·ÎÒÓ ·ÔÚÚÈÌÌ¿ÙˆÓ ‹ ÙÔ Ì·Á·Í› ·fi ÙÔ ÔÔ›Ô ·ÁÔÚ¿Û·Ù ÙÔ ÚÔ˚fiÓ. German Entsorgung von Altgeräten 1.Wenn dieses Symbol eines durchgestrichenen Abfalleimers auf einem Produkt angebracht ist, unterliegt dieses Produkt der europäischen Richtlinie 2002/96/EC. 2.Alle Elektro- und Elektronik-Altgeräte müssen getrennt vom Hausmüll über dafür staatlich vorgesehenen Stellen entsorgt werden. 3.Mit der ordnungsgemäßen Entsorgung des alten Geräts vermeiden Sie Umweltschäden und eine Gefährdung der persönlichen Gesundheit. 4.Weitere Informationen zur Entsorgung des alten Geräts erhalten Sie bei der Stadtverwaltung, beim Entsorgungsamt oder in dem Geschäft, wo Sie das Produkt erworben haben. Spanish Cómo deshacerse de aparatos eléctricos y electrónicos viejos 1.Si en un producto aparece el símbolo de un contenedor de basura tachado, significa que éste se acoge a la Directiva 2002/96/CE. 2.Todos los aparatos eléctricos o electrónicos se deben desechar de forma distinta del servicio municipal de recogida de basura, a través de puntos de recogida designados por el gobierno o las autoridades locales. 3.La correcta recogida y tratamiento de los dispositivos inservibles contribuye a evitar riesgos potenciales para el medio ambiente y la salud pública. 4.Para obtener más información sobre cómo deshacerse de sus aparatos eléctricos y electrónicos viejos, póngase en contacto con su ayuntamiento, el servicio de recogida de basuras o el establecimiento donde adquirió el producto. Danish Sådan smider du dit gamle apparat ud 1.Når der er et tegn med et kryds over en skraldespand, betyder det, at produktet er omfattet af EU-direktiv 2002/96/EC. 2.Alle elektriske og elektroniske produkter skal smides ud et andet sted end gennem den kommunale affaldsordning ved hjælp af specielle indsamlingsfaciliteter, der er organiseret af staten 09 Regulatory Information cont. Portuguese Hungarian Slovak Polish Czech Croatian 10 Regulatory Information cont. Estonian Latvian Lithuanian 11
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Language : ko-KR Tagged PDF : No XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Format : application/pdf Creator : 최선미 Title : EMISSION TEST REPORT Create Date : 2011:12:07 16:26:48+09:00 Creator Tool : Microsoft® Office Word 2007 Modify Date : 2011:12:07 16:28:14+09:00 Metadata Date : 2011:12:07 16:28:14+09:00 Producer : Microsoft® Office Word 2007 Document ID : uuid:98d4e0ca-8bbb-4f20-8155-59ba1cb49def Instance ID : uuid:b7663173-0268-4f15-bb52-b6e041e03298 Page Count : 53 Author : 최선미EXIF Metadata provided by EXIF.tools