LG Electronics USA 47LV3500UA LED LCD TV Monitor User Manual G User s manual

Download:
Mirror Download [FCC.gov]
Document ID	1387465
Application ID	zCH3u60jEZbn9IUeo7vrLA==
Document Description	user manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	272.3kB (3403804 bits)
Date Submitted	2010-12-08 00:00:00
Date Available	2011-01-22 00:00:00
Creation Date	2010-12-06 12:33:55
Producing Software	Acrobat Distiller 9.4.0 (Windows)
Document Lastmod	2010-12-08 08:34:52
Document Title	Microsoft Word - G_User_s manual.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	C7F6C1A4

Order Number
: GETEC-C1-10-245
FCC Part 15 subpart B
Test Report Number
: GETEC-E3-10-135
Page 1 / 1
APPENDIX G
: USER’S MANUAL
EUT Type: LED LCD TV/Monitor
FCC ID.: BEJ47LV3500UA
OWNER’S MANUAL
LED LCD TV / LCD TV /
PLASMA TV
Please read this manual carefully before operating the
set and retain it for future reference.
The model and serial numbers of the TV is
located on the back of the TV
Record it below should you ever need service.
MODEL
SERIAL
LED LCD TV MODELS
19LV2500 32LV3500
22LV2500 37LV3500
26LV2500 42LV3500
32LV2500 47LV3500
32LV3520 55LV3500
42LV3520
P/NO : SAC34134216 (1012-REV01)
LCD TV MODELS
22LK330 32LK450
26LK330 37LK450
32LK330 42LK450
32LK430 47LK450
42LK430 42LK520
47LK520
55LK520
PLASMA TV MODELS
42PW340 42PW350U
50PW340 50PW350U
42PW350 42PW350R
50PW350 50PW350R
50PZ200
60PZ200
www.lg.com
2
OPEN SOURCE LICENSE
LICENSES
LICENSES
Supported licenses may differ by model. For more information about licenses, visit www.lg.com.
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D
symbol are trademarks of Dolby Laboratories.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC.
ABOUT DIVX VIDEO: DivXÂŽ is a digital video format created by DivX, Inc. This is
an official DivX CertifiedÂŽ device that plays DivX video. Visit www.divx.com for
more information and software tools to convert your files into DivX video.
“DivX Certified® to play DivX® video up to HD 1080p, including premium
content.”
“DivX®, DivX Certified® and associated logos are registered trademarks of DivX,
Inc. and are used under license.”
“Covered by one or more of the following U.S. patents:
7,295,673; 7,460,668; 7,515,710; 7,519,274”
NOTE
LCD
: LED LCD TV, LCD TV
y : Plasma TV
Image shown may differ from your TV.
y
Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.
y
Plasma
claimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following
disclaimer in the documentation and/or other materials provided with the distribution.
3. Neither the names of PolarSSL or XySSL nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS
OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY
WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
RSA Data Security license
Copyright (C) 1991-2, RSA Data Security, Inc. Created 1991. All rights reserved.
License to copy and use this software is granted provided that it is identified as the “RSA Data Security, Inc. MD5
Message-Digest Algorithm” in all material mentioning or referencing this software or this function.
License is also granted to make and use derivative works provided that such works are identified as “derived from the
RSA Data Security, Inc. MD5 Message-Digest Algorithm” in all material mentioning or referencing the derived work.
RSA Data Security, Inc. makes no representations concerning either the merchantability of this software or the suitability
of this software for any particular purpose. It is provided “as is” without express or implied warranty of any kind.
These notices must be retained in any copies of any part of this documentation and/or software.
ENG
ENGLISH
ENGLISH
ENG
ABOUT DIVX VIDEO-ON-DEMAND: This DivX CertifiedÂŽ device must be registered
in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your
registration code, locate the DivX VOD section in your device setup menu. Go to
vod.divx.com for more information on how to complete your registration.
119
118
OPEN SOURCE LICENSE
IMPORTANT SAFETY INSTRUCTIONS
tation files (the “Software”), to deal in the Software without restriction, including without limitation the rights to use,
copy, modify, merge, publish, distribute, and/or sell copies of the Software, and to permit persons to whom the Software
is furnished to do so, provided that the above copyright notice(s) and this permission notice appear in all copies of the
Software and that both the above copyright notice(s) and this permission notice appear in supporting documentation.
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR HOLDERS
INCLUDED IN THIS NOTICE BE LIABLE FOR ANY CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL
DAMAGES, OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN
AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION
WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
Except as contained in this notice, the name of a copyright holder shall not be used in advertising or otherwise to promote
the sale, use or other dealings in this Software without prior written authorization of the copyright holder.
BSD license
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following
conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following
disclaimer in the documentation and/or other materials provided with the distribution.
3. Neither the names of PolarSSL or XySSL nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS
OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY
WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- xyssl
Copyright (C) 2006-2008 Christophe Devine
Copyright (C) 2009 Paul Bakker 
All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following
conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following dis-
IMPORTANT SAFETY INSTRUCTIONS
Always comply with the following precautions to avoid dangerous situations and ensure peak performance
of your product.
Read these instructions.
Keep these instructions.
Heed all warning.
Follow all instruction.
TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR
BACK). NO USER SERVICEABLE PARTS
INSIDE. REFER TO QUALIFIED SERVICE
PERSONNEL.
The lightning flash with arrowhead
symbol, within an equilateral triangle,
is intended to alert the user to the
presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be
of sufficient magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an
equilateral triangle is intended to alert
the user to the presence of important
operating and maintenance (servicing)
instructions in the literature accompanying
the appliance.
WARNING/CAUTION
- TO REDUCE THE RISK OF FIRE AND
ELECTRIC SHOCK, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR MOISTURE.
- TO PREVENT FIRE OR SHOCK HAZARDS,
DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
Do not use this apparatus near water.
y
Clean only with dry cloth.
y
Do not block any ventilation openings. Install
y
in accordance with the manufacturer’s
instructions.
Do not install near any heat sources such
y
as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
Do not defeat the safety purpose of the
y
polarized or grounding-type plug. A polarized
plug has two blades with one wider than the
other. A grounding-type plug has two blades
and a third grounding prong. The wide blade
or the third prong are provided for your safety.
If the provided plug does not fit into your
outlet, consult an electrician for replacement
of the obsolete outlet.
ENG
ENGLISH
ENGLISH
ENG
- strace
Copyright (c) 1991, 1992 Paul Kranenburg 
Copyright (c) 1993 Branko Lankester 
Copyright (c) 1993 Ulrich Pegelow 
Copyright (c) 1995, 1996 Michael Elizabeth Chastain 
Copyright (c) 1993, 1994, 1995, 1996 Rick Sladkey 
Copyright (C) 1998-2003 Wichert Akkerman 
Copyright (c) 2002-2008 Roland McGrath 
Copyright (c) 2003-2008 Dmitry V. Levin 
Copyright (c) 2007-2008 Jan Kratochvil 
All rights reserved.
4
OPEN SOURCE LICENSE
IMPORTANT SAFETY INSTRUCTIONS
Protect the power cord from being walked on
y
or pinched particularly at plugs, convenience
receptacles, and the point where they exit
from the apparatus.
Only use attachments/accessories specified
y
by the manufacturer.
Use only with a cart, stand, tripod, bracket,
y
or table specified by the manufacturer, or
sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
Refer all servicing to qualified service
y
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does
not operate normally, or has been dropped.
Never touch this apparatus or antenna during
y
a thunder or lightning storm.
When mounting a TV on the wall, make sure
y
not to install the TV by hanging the power
and signal cables on the back of the TV.
CAUTION concerning the Power Cord
y
(Can differ by country):
It is recommended that appliances be
placed upon a dedicated circuit; that is, a
single outlet circuit which powers only that
appliance and has no additional outlets or
branch circuits. Check the specification page
of this owner’s manual to be certain. Do not
connect too many appliances to the same
AC power outlet as this could result in fire or
electric shock. Do not overload wall outlets.
Overloaded wall outlets, loose or damaged
wall outlets, extension cords, frayed power
cords, or damaged or cracked wire insulation
are dangerous. Any of these conditions could
result in electric shock or fire. Periodically
examine the cord of your appliance, and
if its appearance indicates damage or
deterioration, unplug it, discontinue use of
the appliance, and have the cord replaced
with an exact replacement part by an
authorized service. Protect the power cord
from physical or mechanical abuse, such as
being twisted, kinked, pinched, closed in a
door, or walked upon. Pay particular attention
to plugs, wall outlets, and the point where
the cord exits the appliance. Do not move
the TV with the power cord plugged in. Do
not use a damaged or loose power cord. Be
sure do grasp the plug when unplugging the
power cord. Do not pull on the power cord
to unplug the TV.
Warning - To reduce the risk of fire or
y
electrical shock, do not expose this product
to rain, moisture or other liquids. Do not
touch the TV with wet hands. Do not install
this product near flammable objects such
as gasoline or candles, or expose the TV to
direct air conditioning.
Discusses bugs, as well as engine internals, design issues, specific licenses, porting, etc.
Our home page can be found at http://www.freetype.org
JPEG license
This software is copyright (C) 1991-1998, Thomas G. Lane.
All Rights Reserved except as specified below.
Permission is hereby granted to use, copy, modify, and distribute this software (or portions thereof) for any purpose,
without fee, subject to these conditions:
(1) If any part of the source code for this software is distributed, then this README file must be included, with this
copyright and no-warranty notice unaltered; and any additions, deletions, or changes to the original files must be clearly
indicated in accompanying documentation.
(2) If only executable code is distributed, then the accompanying documentation must state that “this software is based
in part on the work of the Independent JPEG Group”.
(3) Permission for use of this software is granted only if the user accepts full responsibility for any undesirable consequences; the authors accept NO LIABILITY for damages of any kind.
zlib/libpng License
This product may contain open source software licensed under zlib/libpng License.
Libmng : Copyright Š 2000-2008 Gerard Juyn (gerard@libmng.com)
y
Libpng : Copyright (c) 1998-2008 Glenn Randers-Pehrson
y
(Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger)
(Version 0.88 Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc.)
Md5 checksum : Copyright (C) 1999, 2000, 2002 Aladdin Enterprises.
y
Zlib : Copyright (C) 1995-2010 Jean-loup Gailly and Mark Adler
y
This software is provided ‘as-is’, without any express or implied warranty. In no event will the authors be held liable for
any damages arising from the use of this software.
Permission is granted to anyone to use this software for any purpose, including commercial applications, and to alter it
and redistribute it freely, subject to the following restrictions:
1. The origin of this software must not be misrepresented; you must not claim that you wrote the original software. If
you use this software in a product, an acknowledgment in the product documentation would be appreciated but is not
required.
2. Altered source versions must be plainly marked as such, and must not be misrepresented as being the original software.
3. This notice may not be removed or altered from any source distribution.
Jean-loup Gailly
Mark Adler
X.net license
Copyright (c) 1995-2001 International Business Machines Corporation and others
All rights reserved.
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documen
ENG
ENGLISH
ENGLISH
ENG
Unplug this apparatus during lightning
y
storms or when unused for long periods of
time.
Do not allow an impact shock or any objects
y
to fall into the product, and do not drop
anything onto the screen.
117
116
OPEN SOURCE LICENSE
thus encourage you to use the following text:
Portions of this software are copyright  The FreeType Project (www.freetype.org). All rights reserved.
Please replace  with the value from the FreeType version you actually use.
Legal Terms
0. Definitions
Throughout this license, the terms `package’, `FreeType Project’ and `FreeType archive’ refer to the set of files originally
distributed by the authors (David Turner, Robert Wilhelm, and Werner Lemberg) as the `FreeType Project’, be they named
as alpha, beta or final release.
`You’ refers to the licensee, or person using the project, where `using’ is a generic term including compiling the project’s
source code as well as linking it to form a `program’ or `executable’. This program is referred to as `a program using the
FreeType engine’.
This license applies to all files distributed in the original FreeType Project, including all source code, binaries and documentation, unless otherwise stated in the file in its original, unmodified form as distributed in the original archive. If you
are unsure whether or not a particular file is covered by this license, you must contact us to verify this.
The FreeType Project is copyright (C) 1996-2000 by David Turner, Robert Wilhelm, and Werner Lemberg. All rights
reserved except as specified below.
3. Advertising
Neither the FreeType authors and contributors nor you shall use the name of the other for commercial, advertising, or
promotional purposes without specific prior written permission. We suggest, but do not require, that you use one or more
of the following phrases to refer to this software in your documentation or advertising materials: `FreeType Project’,
`FreeType Engine’, `FreeType library’, or `FreeType Distribution’.
As you have not signed this license, you are not required to accept it. However, as the FreeType Project is copyrighted
material, only this license, or another one contracted with the authors, grants you the right to use, distribute, and modify
it. Therefore, by using, distributing, or modifying the FreeType Project, you indicate that you understand and accept all
the terms of this license.
4. Contacts
There are two mailing lists related to FreeType:
freetype@nongnu.org
Discusses general use and applications of FreeType, as well as future and wanted additions to the library and distribution.
If you are looking for support, start in this list if you haven’t found anything to help you in the documentation.
freetype-devel@nongnu.org
Do not expose to dripping or splashing and
y
do not place objects filled with liquids, such
as vases, cups, etc. on or over the apparatus
(e.g. on shelves above the unit).
Grounding
y
Ensure that you connect the earth ground
wire to prevent possible electric shock
(i.e. a TV with a three-prong grounded AC
plug must be connected to a three-prong
grounded AC outlet). If grounding methods
are not possible, have a qualified electrician
install a separate circuit breaker. Do not try to
ground the unit by connecting it to telephone
wires, lightening rods, or gas pipes.
Power Supply
Short-circuit Breaker
DISCONNECTING DEVICE FROM THE MAIN
y
POWER
The power outlet must remain readily
accessed in the event the device needs to
be unplugged.
As long as this unit is connected to the AC
y
wall outlet, it is not disconnected from the
AC power source even if the unit is turned
off.
Do not attempt to modify this product in any
y
way without written authorization from LG
Electronics. Unauthorized modification could
void the user’s authority to operate this
product.
ANTENNAS Outdoor antenna grounding
y
(Can differ by country):
If an outdoor antenna is installed, follow
the precautions below. An outdoor antenna
system should not be located in the vicinity
of overhead power lines or other electric light
or power circuits, or where it can come in
contact with such power lines or circuits as
death or serious injury can occur. Be sure the
antenna system is grounded so as to provide
some protection against voltage surges
and built-up static charges. Section 810 of
the National Electrical Code (NEC) in the
U.S.A. provides information with respect to
proper grounding of the mast and supporting
structure, grounding of the lead-in wire to
an antenna discharge unit, size of grounding
conductors, location of antenna discharge
unit, connection to grounding electrodes and
requirements for the grounding electrode.
Antenna grounding according to the National
Electrical Code, ANSI/NFPA 70
Antenna Lead in Wire
Ground Clamp
Electric Service
Equipment
Ground Clamp
Antenna Discharge Unit
(NEC Section 810-20)
Grounding Conductor
(NEC Section 810-21)
Power Service Grounding
Electrode System
(NEC Art 250, Part H)
NEC: National Electrical Code
Cleaning
y
When cleaning, unplug the power cord and
wipe gently with a soft cloth to prevent
scratching. Do not spray water or other
liquids directly on the TV as electric shock
may occur. Do not clean with chemicals
such as alcohol, thinners or benzine.
Moving
y
Make sure the product is turned off,
unplugged and all cables have been
removed. It may take 2 or more people to
carry larger TVs. Do not press or put stress
on the front panel of the TV.
Ventilation
y
Install your TV where there is proper
ventilation. Do not install in a confined
space such as a bookcase. Do not cover the
product with cloth or other materials while
plugged. Do not install in excessively dusty
places.
If you smell smoke or other odors coming
y
from the TV, unplug the power cord contact
an authorized service center.
Do not press strongly upon the panel with
y
hand or sharp object such as nail, pencil or
pen, or make a scratch on it.
Keep the product away from direct sunlight.
y
ENG
ENGLISH
ENGLISH
ENG
1. No Warranty
THE FREETYPE PROJECT IS PROVIDED `AS IS’ WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. IN NO EVENT WILL ANY OF THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY DAMAGES
CAUSED BY THE USE OR THE INABILITY TO USE, OF THE FREETYPE PROJECT.
2. Redistribution
This license grants a worldwide, royalty-free, perpetual and irrevocable right and license to use, execute, perform, compile, display, copy, create derivative works of, distribute and sublicense the FreeType Project (in both source and object
code forms) and derivative works thereof for any purpose; and to authorize others to exercise some or all of the rights
granted herein, subject to the following conditions:
- Redistribution of source code must retain this license file (`FTL.TXT’) unaltered; any additions, deletions or changes to
the original files must be clearly indicated in accompanying documentation. The copyright notices of the unaltered, original files must be preserved in all copies of source files.
- Redistribution in binary form must provide a disclaimer that states that the software is based in part of the work of the
FreeType Team, in the distribution documentation. We also encourage you to put an URL to the FreeType web page in
your documentation, though this isn’t mandatory.
These conditions apply to any software derived from or based on the FreeType Project, not just the unmodified files. If
you use our work, you must acknowledge us. However, no fee need be paid to us.
IMPORTANT SAFETY INSTRUCTIONS
6
OPEN SOURCE LICENSE
IMPORTANT SAFETY INSTRUCTIONS
yDot Defect
The Plasma or LCD panel is a high
technology product with resolution of two
million to six million pixels. In a very few
cases, you could see fine dots on the screen
while you’re viewing the TV. Those dots
are deactivated pixels and do not affect the
performance and reliability of the TV.
Generated Sound
y
“Cracking” noise: A cracking noise that
occurs when watching or turning off the TV
is generated by plastic thermal contraction
due to temperature and humidity. This noise
is common for products where thermal
deformation is required.
Electrical circuit humming/panel buzzing: A
low level noise is generated from a highspeed switching circuit, which supplies a
large amount of current to operate a product.
It varies depending on the product.
This generated sound does not affect the
performance and reliability of the product.
- When viewing 3D imaging, watch the TV
from an effective viewing angle and within
the appropriate distance. If you exceed this
viewing angle or distance, you may not be
able to view the 3D imaging. Furthermore,
the 3D imaging may not display if it is viewed
while you are lying down.
- If you watch the 3D imaging too closely or
for a long period of time, it may harm your
eyesight.
- Watching the TV or playing video games
that incorporate 3D imaging with the 3D
glasses for a long period of time can cause
drowsiness, headaches or fatigue to you
and/or your eyes. If you have a headache,
or otherwise feel fatigued or drowsy, stop
watching the TV and take a rest.
- Pregnant woman, seniors, persons with
heart problems or persons who experience
frequent drowsiness should refrain from
watching 3D TV.
- Some 3D imaging may cause you to duck
or dodge the image displayed in the video.
Therefore, it is best if you do not watch 3D
TV near fragile objects or near any objects
that can be knocked over easily.
- Please prevent children under the age of
5 from watching 3D TV. It may affect their
vision development.
Except as contained in this notice, the name(s) of the above copyright holders shall not be used in advertising or otherwise to promote the ale, use or other dealings in this Software without prior written authorization.
Expat license
The source package was downloaded from .
The original packager is Adam Di Carlo .
The current maintainer is Ardo van Rangelrooij .
Copyright (c) 1998, 1999, 2000 Thai Open Source Software Center Ltd and Clark Cooper
Copyright (c) 2001, 2002, 2003, 2004, 2005, 2006 Expat maintainers.
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the “Software”), to deal in the Software without restriction, including without limitation the rights to use, copy,
modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the
Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all copies or substantial portions of the
Software.
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
The FreeType Project LICENSE
Copyright 1996-2002, 2006 by David Turner, Robert Wilhelm, and Werner Lemberg
Introduction
============
The FreeType Project is distributed in several archive packages; some of them may contain, in addition to the FreeType
font engine, various tools and contributions which rely on, or relate to, the FreeType Project.
This license applies to all files found in such packages, and which do not fall under their own explicit license. The license
affects thus the FreeType font engine, the test programs, documentation and makefiles, at the very least.
This license was inspired by the BSD, Artistic, and IJG (Independent JPEG Group) licenses, which all encourage inclusion
and use of free software in commercial and freeware products alike. As a consequence, its main points are that:
- We don’t promise that this software works. However, we will be interested in any kind of bug reports. (`as is’ distribution)
- You can use this software for whatever you want, in parts or full form, without having to pay us. (`royalty-free’ usage)
- You may not pretend that you wrote this software. If you use it, or only parts of it, in a program, you must acknowledge
somewhere in your documentation that you have used the FreeType code. (`credits’)
We specifically permit and encourage the inclusion of this software, with or without modifications, in commercial products. We disclaim all warranties covering The FreeType Project and assume no liability related to The FreeType Project.
Finally, many people asked us for a preferred form for a credit/disclaimer to use in compliance with this license. We
ENG
ENGLISH
ENGLISH
ENG
Viewing 3D Imaging (For 3D TV)
y
- Warning for photosensitization seizure: Some
viewers may experience a seizure or epilepsy
when exposed to certain factors, including
flashing lights or images in TV or video
games. If you or anybody from your family
has a history of epilepsy or seizure, please
consult with your doctor before watching 3D
TV.
Also certain symptoms can occur in
unspecified conditions without any previous
history. If you experience any of the following
symptoms, immediately stop watching the
3D imaging and consult a doctor: dizziness or
lightheadedness, visual transition or altered
vision, visual or facial instability, such as eye
or muscle twitching, unconscious action,
convulsion, loss of conscience, confusion
or disorientation, loss of directional sense,
cramps, or nausea. Parents should monitor
their children, including teenagers, for these
symptoms as they may be more sensitive to
the effects of watching 3D TV.
Risk of photosensitization seizure can be
reduced with the following actions.
- Take frequent breaks from watching 3D TV.
- For those who have vision that is different
in each eye, they should watch the TV after
taking vision correction measures.
- Watch the TV so that your eyes are on the
same level as the 3D screen and refrain from
sitting too closely to the TV.
- Do not watch the 3D imaging when tired or
sick, and avoid watching the 3D imaging for a
long period of time.
- Do not wear the 3D glasses for any other
purpose than viewing 3D imaging on a 3D TV.
- Some viewers may feel disoriented after
watching 3D TV. Therefore, after you watch
3D TV, take a moment to regain awareness
of your situation before moving.
115
114
OPEN SOURCE LICENSE
IMPORTANT SAFETY INSTRUCTIONS
3. All advertising materials mentioning features or use of this software must display the following acknowledgement:
“This product includes cryptographic software written by Eric Young (eay@cryptsoft.com)”
The word ‘cryptographic’ can be left out if the rouines from the library being used are not cryptographic related :-).
4. If you include any Windows specific code (or a derivative thereof) from the apps directory (application code) you must
include an acknowledgement:
“This product includes software written by Tim Hudson (tjh@cryptsoft.com)”
THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS’’ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING,
BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
yLCD
If the TV feels cold to the touch, there may
be a small “flicker” when it is turned on. This
is normal, there is nothing wrong with TV.
Some minute dot defects may be visible on
the screen, appearing as tiny red, green, or
blue spots. However, they have no adverse
effect on the TV’s performance. Avoid
touching the LCD screen or holding your
finger(s) against it for long periods of time.
Doing so may produce some temporary
distortion effects on the screen.
DISPOSAL (Hg lamp only used in LCD TVs)
The licence and distribution terms for any publically available version or derivative of this code cannot be changed. i.e.
this code cannot simply be copied and put under another distribution licence [including the GNU Public Licence.]
MIT license
Permission to use, copy, modify, and distribute this software for any purpose with or without fee is hereby granted,
provided that the above copyright notice and this permission notice appear in all copies.
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
DEALINGS IN THE SOFTWARE.
Except as contained in this notice, the name of a copyright holder shall not be used in advertising or otherwise to promote
the sale, use or other dealings in this Software without prior written authorization of the copyright holder.
- ncurses
Copyright (c) 1998 Free Software Foundation, Inc.
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the “Software”), to deal in the Software without restriction, including without limitation the rights to use,
copy, modify, merge, publish, distribute, distribute with modifications, sublicense, and/or sell copies of the Software, and
to permit persons to whom the Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all copies or substantial portions of the
Software.
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
NONINFRINGEMENT. IN NO EVENT SHALL THE ABOVE COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR HE USE OR OTHER DEALINGS IN THE SOFTWARE.
For USA and Canada
FCC NOTICE
This equipment has been tested and found
to comply with the limits for a Class B
digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is
no guarantee that interference will not occur
in a particular installation. If this equipment
does cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on, the user
is encouraged to try to correct the interference
by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the
equipment and the receiver.
- Connect the equipment to an outlet on
a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/
TV technician for help.
This device complies with part 15 of the FCC
Rules. Operation is subject to the following
two conditions: (1) this device may not cause
harmful interference and (2) this device must
accept any interference received, including
interference that may cause undesired
operation of the device.
Any changes or modifications in construction of
this device which are not expressly approved
by the party responsible for compliance
could void the user’s authority to operate the
equipment.
NOTE TO CABLE/TV INSTALLER
This reminder is provided to call the CATV
system installer’s attention to Article 820-40 of
the National Electric Code (U.S.A.). The code
provides guidelines for proper grounding and,
in particular, specifies that the cable ground
shall be connected to the grounding system of
the building, as close to the point of the cable
entry as practical.
ENG
ENGLISH
ENGLISH
ENG
- libcurl
Copyright (c) 1996 - 2010, Daniel Stenberg, .
All rights reserved.
The fluorescent lamp used in this product contains
a small amount of mercury. Do not dispose of
this product with general household waste.
Disposal of this product must be carried out
in accordance to the regulations of your local
authority.
8
OPEN SOURCE LICENSE
TABLE OF CONTENTS
TABLE OF CONTENTS
113
OpenSSL License
Copyright (c) 1998-2008 The OpenSSL Project. All rights reserved.
LICENSES
42
Using the quick menu
43
Using the customer support
43
- Testing the Picture / Sound
IMPORTANT SAFETY INSTRUCTIONS
43
- Using the product or service informa-
TABLE OF CONTENTS
44 3D IMAGING (FOR 3D TV)
tion
44
3D Technology
- When using 3D Glasses
ASSEMBLING AND PREPARING
45
- 3D Imaging Viewing Range
10
Unpacking
46
Viewing 3D Imaging
13
Optional Extras
14
Parts and buttons
21
Lifting and moving the TV
21
Setting up the TV
48
- Connecting USB storage devices
21
- Attaching the stand
49
- Browsing files
27
- Mounting on a table
51
- Viewing Videos
29
- Mounting on a wall
54
- DivX registration code
30
- Tidying cables
55
- Viewing Photos
57
- Listening to music
31
48 ENTERTAINMENT
THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS’’ AND ANY EXPRESSED OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS
BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
This product includes cryptographic software written by Eric Young (eay@cryptsoft.com).
This product includes software written by Tim Hudson (tjh@cryptsoft.com).
REMOTE CONTROL
59 CUSTOMIZING TV SETTINGS
34 WATCHING TV
59
The Main Menus
60
Customizing Settings
34
Connecting to an antenna or cable
60
- CHANNEL Settings
34
- Connecting an antenna or basic cable
61
- PICTURE Settings
34
- Connecting a cable box
65
- AUDIO Settings
35
Turning the TV on for the first time
66
- TIME Settings
36
Watching TV
67
- LOCK Settings
36
Managing channels
69
- OPTION Settings
36
- Setting up channels
37
- Using favorite channels
38
- Checking current program info
71
MAKING CONNECTIONS
40
Using additional options
72
Connection Overview
40
- Adjusting aspect ratio
73
Connecting to a HD receiver, DVD, or
41
- Changing AV modes
41
- Using the input list
73
- HDMI Connection
- Locking the buttons on the TV (Child
73
- DVI to HDMI Connection
74
- Component Connection
42
Lock)
VCR player
Original SSLeay License
Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) All rights reserved.
This package is an SSL implementation written by Eric Young (eay@cryptsoft.com).
The implementation was written so as to conform with Netscapes SSL.
This library is free for commercial and non-commercial use as long as the following conditions are aheared to. The following conditions apply to all code found in this distribution, be it the RC4, RSA, lhash, DES, etc., code; not just the SSL
code. The SSL documentation included with this distribution is covered by the same copyright terms except that the
holder is Tim Hudson (tjh@cryptsoft.com).
Copyright remains Eric Young’s, and as such any Copyright notices in the code are not to be removed. If this package is
used in a product, Eric Young should be given attribution as the author of the parts of the library used. This can be in the
form of a textual message at program startup or in documentation (online or textual) provided with the package.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following
conditions are met:
1. Redistributions of source code must retain the copyright notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following
disclaimer in the documentation and/or other materials provided with the distribution.
ENG
ENGLISH
ENGLISH
ENG
10
45
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following
conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following
disclaimer in the documentation and/or other materials provided with the distribution.
3. All advertising materials mentioning features or use of this software must display the following acknowledgment:
“This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www.openssl.org/)”
4. The names “OpenSSL Toolkit” and “OpenSSL Project” must not be used to endorse or promote products derived
from this software without prior written permission. For written permission, please contact openssl-core@openssl.org.
5. Products derived from this software may not be called “OpenSSL” nor may “OpenSSL” appear in their names without
prior written permission of the OpenSSL Project.
6. Redistributions of any form whatsoever must retain the following acknowledgment:
“This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.
org/)”
112
OPEN SOURCE LICENSE
11. MISCELLANEOUS.
This License represents the complete agreement concerning subject matter hereof. If any provision of this License is
held to be unenforceable, such provision shall be reformed only to the extent necessary to make it enforceable. This
License shall be governed by California law provisions (except to the extent applicable law, if any, provides otherwise),
excluding its conflict-of-law provisions. With respect to disputes in which at least one party is a citizen of, or an entity
chartered or registered to do business in the United States of America, any litigation relating to this License shall be
subject to the jurisdiction of the Federal Courts of the Northern District of California, with venue lying in Santa Clara
County, California, with the losing party responsible for costs, including without limitation, court costs and reasonable
attorneys’ fees and expenses. The application of the United Nations Convention on Contracts for the International Sale
of Goods is expressly excluded. Any law or regulation which provides that the language of a contract shall be construed
against the drafter shall not apply to this License.
12. RESPONSIBILITY FOR CLAIMS.
As between Initial Developer and the Contributors, each party is responsible for claims and damages arising, directly or
indirectly, out of its utilization of rights under this License and You agree to work with Initial Developer and Contributors
to distribute such responsibility on an equitable basis. Nothing herein is intended or shall be deemed to constitute any
admission of liability.
13. MULTIPLE-LICENSED CODE.
Initial Developer may designate portions of the Covered Code as Multiple-Licensed. Multiple-Licensed means that the
Initial Developer permits you to utilize portions of the Covered Code under Your choice of the MPL or the alternative
licenses, if any, specified by the Initial Developer in the file described in Exhibit A.
Software distributed under the License is distributed on an “AS IS”
basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See the
License for the specific language governing rights and limitations under the License.
The Original Code is ______________________________________.
The Initial Developer of the Original Code is ________________________.
Portions created by ______________________ are Copyright (C) ______
_______________________.All Rights Reserved.
Contributor(s): ______________________________________.
Alternatively, the contents of this file may be used under the terms
of the _____ license (the [___] License), in which case the
provisions of [______] License are applicable instead of those
above.If you wish to allow use of your version of this file only
under the terms of the [____] License and not to allow others to use
your version of this file under the MPL, indicate your decision by
deleting the provisions above and replace them with the notice and
other provisions required by the [___] License. If you do not delete
the provisions above, a recipient may use your version of this file
under either the MPL or the [___] License.”
[NOTE: The text of this Exhibit A may differ slightly from the text of the notices in the Source Code files of the Original
Code. You should use the text of this Exhibit A rather than the text found in the Original Code Source Code for Your
Modifications.]
74
- Composite Connection
75
- RGB Connection
75
Connecting to an Audio System
75
- Digital optical audio connection
76
Connecting to a USB
76
Connecting to a Headphone (
76
SIMPLINK Connection
76
- Activating and Using the SIMPLINK
LCD
menus
78 MAINTENANCE
78
Cleaning Your TV
78
- Screen and frame
78
- Cabinet and stand
78
- Power cord
78
Preventing “Image burn” or “Burn-in” on
your TV screen
79 TROUBLESHOOTING
81
SPECIFICATIONS
87 IR CODES
89 EXTERNAL CONTROL DEVICE
SETUP
96 OPEN SOURCE LICENSE
ENG
ENGLISH
ENGLISH
ENG
EXHIBIT A -Mozilla Public License.
``The contents of this file are subject to the Mozilla Public License
Version 1.1 (the “License”); you may not use this file except in
compliance with the License. You may obtain a copy of the License at
http://www.mozilla.org/MPL/
TABLE OF CONTENTS
10
OPEN SOURCE LICENSE
ASSEMBLING AND PREPARING
ASSEMBLING AND PREPARING
PROVE DEFECTIVE IN ANY RESPECT, YOU (NOT THE INITIAL DEVELOPER OR ANY OTHER CONTRIBUTOR) ASSUME
THE COST OF ANY NECESSARY SERVICING, REPAIR OR CORRECTION. THIS DISCLAIMER OF WARRANTY
CONSTITUTES AN ESSENTIAL PART OF THIS LICENSE. NO USE OF ANY COVERED CODE IS AUTHORIZED
HEREUNDER EXCEPT UNDER THIS DISCLAIMER.
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual
product and item.
TV
SAVING
LIST
FLASHBK
MARK
FAV
VOL
3D
CH
8. TERMINATION.
8.1. This License and the rights granted hereunder will terminate automatically if You fail to comply with terms herein
and fail
to cure such breach within 30 days of becoming aware of the breach. All sublicenses to the Covered Code which are
properly granted shall survive any termination of this License. Provisions which, by their nature, must remain in effect
beyond the termination of this License shall survive.
8.2. If You initiate litigation by asserting a patent infringement claim (excluding declatory judgment actions) against Initial
Developer or a Contributor (the Initial Developer or Contributor against whom You file such action is referred to as
“Participant”) alleging that:
ENERGY AV MODE INPUT
111
MUTE
MENU INFO
Q.MENU
ENTER
BACK
EXIT
L/R SELECT
FREEZE
RATIO
Remote control and batteries (AAA)
Owner’s manual
Polishing cloth
(Depending on model)
Gently wipe the spots on the cabinet with the polishing cloth.
(b) any software, hardware, or device, other than such Participant’s Contributor Version, directly or indirectly infringes any
patent, then any rights granted to You by such Participant under Sections 2.1(b) and 2.2(b) are revoked effective as of the
date You first made, used, sold, distributed, or had made, Modifications made by that Participant.
8.3. If You assert a patent infringement claim against Participant alleging that such Participant’s Contributor Version
directly or indirectly infringes any patent where such claim is resolved (such as by license or settlement) prior to the initiation of patent infringement litigation, then the reasonable value of the licenses granted by such Participant under
Sections 2.1 or 2.2 shall be taken into account in determining the amount or value of any payment or license. 8.4. In the
event of termination under Sections 8.1 or 8.2 above, all end user license agreements (excluding distributors and resellers) which have been validly granted by You or any distributor hereunder prior to termination shall survive termination.
9. LIMITATION OF LIABILITY.
UNDER NO CIRCUMSTANCES AND UNDER NO LEGAL THEORY, WHETHER TORT (INCLUDING NEGLIGENCE),
CONTRACT, OR OTHERWISE, SHALL YOU, THE INITIAL DEVELOPER, ANY OTHER CONTRIBUTOR, OR ANY
DISTRIBUTOR OF COVERED CODE, OR ANY SUPPLIER OF ANY OF SUCH PARTIES, BE LIABLE TO ANY PERSON FOR
ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY CHARACTER INCLUDING,
WITHOUT LIMITATION, DAMAGES FOR LOSS OF GOODWILL, WORK STOPPAGE, COMPUTER FAILURE OR
MALFUNCTION, OR ANY AND ALL OTHER COMMERCIAL DAMAGES OR LOSSES, EVEN IF SUCH PARTY SHALL
HAVE BEEN INFORMED OF THE POSSIBILITY OF SUCH DAMAGES. THIS LIMITATION OF LIABILITY SHALL NOT
APPLY TO LIABILITY FOR DEATH OR PERSONAL INJURY RESULTING FROM SUCH PARTY’S NEGLIGENCE TO THE
EXTENT APPLICABLE LAW PROHIBITS SUCH LIMITATION. SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THIS EXCLUSION AND LIMITATION MAY NOT
APPLY TO YOU.
10. U.S. GOVERNMENT END USERS.
The Covered Code is a ‘’commercial item,’’ as that term is defined in 48 C.F.R. 2.101 (Oct. 1995), consisting of ‘’commercial computer software’’ and ‘’commercial computer software documentation,’’ as such terms are used in 48 C.F.R.
12.212 (Sept. 1995). Consistent with 48 C.F.R. 12.212 and 48 C.F.R. 227.7202-1 through 227.7202-4 (June 1995), all U.S.
Government End Users acquire Covered Code with only those rights set forth herein.
ENG
ENGLISH
ENGLISH
ENG
CD
(a) such Participant’s Contributor Version directly or indirectly infringes any patent, then any and all rights granted by such
Participant to You under Sections 2.1 and/or 2.2 of this License shall, upon 60 days notice from Participant terminate
prospectively, unless if within 60 days after receipt of notice You either: (i) agree in writing to pay Participant a mutually
agreeable reasonable royalty for Your past and future use of Modifications made by such Participant, or (ii) withdraw Your
litigation claim with respect to the Contributor Version against such Participant. If within 60 days of notice, a reasonable
royalty and payment arrangement are not mutually agreed upon in writing by the parties or the litigation claim is not
withdrawn, the rights granted by Participant to You under Sections 2.1 and/or 2.2 automatically terminate at the expiration
of the 60 day notice period specified above.
110
OPEN SOURCE LICENSE
3.6. Distribution of Executable Versions.
You may distribute Covered Code in Executable form only if the requirements of Section 3.1-3.5 have been met for that
Covered Code, and if You include a notice stating that the Source Code version of the Covered Code is available under
the terms of this License, including a description of how and where You have fulfilled the obligations of Section 3.2. The
notice must be conspicuously included in any notice in an Executable version, related documentation or collateral in which
You describe recipients’ rights relating to the Covered Code. You may distribute the Executable version of Covered Code
or ownership rights under a license of Your choice, which may contain terms different from this License, provided that
You are in compliance with the terms of this License and that the license for the Executable version does not attempt to
limit or alter the recipient’s rights in the Source Code version from the rights set forth in this License. If You distribute
the Executable version under a different license You must make it absolutely clear that any terms which differ from this
License are offered by You alone, not by the Initial Developer or any Contributor. You hereby agree to indemnify the Initial
Developer and every Contributor for any liability incurred by the Initial Developer or such Contributor as a result of any
such terms You offer.
ASSEMBLING AND PREPARING
PW340, PW350, PW350U, PW350R, PZ200 series
(Other models)
x4
x3
M4 x 26 M5 x 14.5
(For 60PZ200)
x4
x3
M4 x 28 M5 x 25
Screw for assembly
Cable holder
Power Cord holder
(For 42PW340,
42PW350)
Power Cord
4. Inability to Comply Due to Statute or Regulation.
If it is impossible for You to comply with any of the terms of this License with respect to some or all of the Covered Code
due to statute, judicial order, or regulation then You must: (a) comply with the terms of this License to the maximum
extent possible; and (b) describe the limitations and the code they affect. Such description must be included in the LEGAL
file described in Section 3.4 and must be included with all distributions of the Source Code. Except to the extent prohibited by statute or regulation, such description must be sufficiently detailed for a recipient of ordinary skill to be able to
understand it.
Protection cover tape
(For 50PW340,
50PW350)
x2
Protection cover
x3
Ferrite core
ENG
ENGLISH
ENGLISH
ENG
3.7. Larger Works.
You may create a Larger Work by combining Covered Code with other code not governed by the terms of this License
and distribute the Larger Work as a single product. In such a case, You must make sure the requirements of this License
are fulfilled for the Covered Code.
5. Application of this License.
This License applies to code to which the Initial Developer has attached the notice in Exhibit A and to related Covered
Code.
LV3500 series
(For 32LV3500)
6. Versions of the License.
6.1. New Versions.
Netscape Communications Corporation (‘’Netscape’’) may publish revised and/or new versions of the License from time
to time. Each version will be given a distinguishing version number.
6.2. Effect of New Versions.
Once Covered Code has been published under a particular version of the License, You may always continue to use it
under the terms of that version. You may also choose to use such Covered Code under the terms of any subsequent
version of the License published by Netscape. No one other than Netscape has the right to modify the terms applicable
to Covered Code created under this License.
6.3. Derivative Works.
If You create or use a modified version of this License (which you may only do in order to apply it to code which is not
already Covered Code governed by this License), You must (a) rename Your license so that the phrases ‘’Mozilla’’,
‘’MOZILLAPL’’, ‘’MOZPL’’, ‘’Netscape’’, “MPL”, ‘’NPL’’ or any confusingly similar phrase do not appear in your license
(except to note that your license differs from this License) and (b) otherwise make it clear that Your version of the license
contains terms which differ from the Mozilla Public License and Netscape Public License. (Filling in the name of the Initial
Developer, Original Code or Contributor in the notice described in Exhibit A shall not of themselves be deemed to be
modifications of this License.)
7. DISCLAIMER OF WARRANTY.
COVERED CODE IS PROVIDED UNDER THIS LICENSE ON AN “AS IS’’ BASIS, WITHOUT WARRANTY OF ANY KIND,
EITHER EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, WARRANTIES THAT THE COVERED CODE IS
FREE OF DEFECTS, MERCHANTABLE, FIT FOR A PARTICULAR PURPOSE OR NON-INFRINGING. THE ENTIRE RISK
AS TO THE QUALITY AND PERFORMANCE OF THE COVERED CODE IS WITH YOU. SHOULD ANY COVERED CODE
11
x8
M4 x 12
Screw for assembly
Composite gender cable
Cable holder
LV2500 series
x2
M4 x 16
M4 x 6
Screw for assembly
Cable holder
22LK330
Cable holder
Protection cover
Power Cord
Screw for fixing
12
OPEN SOURCE LICENSE
ASSEMBLING AND PREPARING
3. Distribution Obligations.
3.1. Application of License.
The Modifications which You create or to which You contribute are governed by the terms of this License, including
without limitation Section 2.2. The Source Code version of Covered Code may be distributed only under the terms of this
License or a future version of this License released under Section 6.1, and You must include a copy of this License with
every copy of the Source Code You distribute. You may not offer or impose any terms on any Source Code version that
alters or restricts the applicable version of this License or the recipients’ rights hereunder. However, You may include an
additional document offering the additional rights described in Section 3.5.
26/32LK330, LK430, LK450, LK520 series
(Except 47LK450,
47/55LK520)
x8
M4 x 20
Screw for assembly
Screw for fixing
Protection cover
Power Cord
CAUTION
Do not use any unapproved items to ensure the safety and product life span.
y
Any damages or injuries by using unapproved items are not covered by the warranty.
y
NOTE
10 mm (+/-5 mm)
[to an External device]
[to the TV]
- (For 42PW340, 42PW350)
Use the ferrite core to reduce the electromagnetic interference in the power cable.
Wind the power cable on the ferrite core once. Place the ferrite core close to the TV.
10 mm (+/-5 mm)
[to a wall plug]
[to the TV]
- (For 50PW340, 50PW350)
Use the ferrite core to reduce the electromagnetic interference in the power cable.
Wind the power cable on the ferrite core once. Place the ferrite core close to the TV and a wall
plug.
10 mm (+/-5 mm)
10 mm (+/-5 mm)
[to a wall plug]
[to the TV]
( LCD ) For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm
y
(0.39 inches) thick and 18 mm (0.7 inches) width.
*A
*B
10 mm (0.39 inches)
18 mm (0.7 inches)
3.2. Availability of Source Code.
Any Modification which You create or to which You contribute must be made available in Source Code form under the
terms of this License either on the same media as an Executable version or via an accepted Electronic Distribution
Mechanism to anyone to whom you made an Executable version available; and if made available via Electronic Distribution
Mechanism,
must remain available for at least twelve (12) months after the date it initially became available, or at least six (6) months
after a subsequent version of that particular Modification has been made available to such recipients. You are responsible
for ensuring that the Source Code version remains available even if the Electronic Distribution Mechanism is maintained
by a third party.
3.3. Description of Modifications.
You must cause all Covered Code to which You contribute to contain a file documenting the changes You made to create
that Covered Code and the date of any change. You must include a prominent statement that the Modification is derived,
directly or indirectly, from Original Code provided by the Initial Developer and including the name of the Initial Developer
in (a) the Source Code, and (b) in any notice in an Executable version or related documentation in which You describe the
origin or ownership of the Covered Code.
3.4. Intellectual Property Matters
(a) Third Party Claims.
If Contributor has knowledge that a license under a third party’s intellectual property rights is required to exercise the
rights granted by such Contributor under Sections 2.1 or 2.2, Contributor must include a text file with the Source Code
distribution titled “LEGAL’’ which describes the claim and the party making the claim in sufficient detail that a recipient
will know whom to contact. If Contributor obtains such knowledge after the Modification is made available as described
in Section 3.2, Contributor shall promptly modify the LEGAL file in all copies Contributor makes available thereafter and
shall take other steps (such as notifying appropriate mailing lists or newsgroups) reasonably calculated to inform those
who received the Covered Code that new knowledge has been obtained.
(b) Contributor APIs.
If Contributor’s Modifications include an application programming interface and Contributor has knowledge of patent
licenses which are reasonably necessary to implement that API, Contributor must also include this information in the
LEGAL file.
(c) Representations.
Contributor represents that, except as disclosed pursuant to Section 3.4(a) above, Contributor believes that Contributor’s
Modifications are Contributor’s original creation(s) and/or Contributor has sufficient rights to grant the rights conveyed by
this License.
3.5. Required Notices.
You must duplicate the notice in Exhibit A in each file of the Source Code. If it is not possible to put such notice in a
particular
Source Code file due to its structure, then You must include such notice in a location (such as a relevant directory) where
a user would be likely to look for such a notice. If You created one or more Modification(s) You may add your name as a
Contributor to the notice described in Exhibit A. You must also duplicate this License in any documentation for the Source
Code where You describe recipients’ rights or ownership rights relating to Covered Code. You may choose to offer, and
to charge a fee for, warranty, support, indemnity or liability obligations to one or more recipients of Covered Code.
However, You may do so only on Your own behalf, and not on behalf of the Initial Developer or any Contributor You must
make it absolutely clear than any such warranty, support, indemnity or liability obligation is offered by You alone, and You
hereby agree to indemnify the Initial Developer and every Contributor for any liability incurred by the Initial Developer or
such Contributor as a result of warranty, support, indemnity or liability terms You offer.
ENG
ENGLISH
ENGLISH
ENG
The items supplied with your product may vary depending on the model.
y
Product specifications or contents of this manual may be changed without prior notice due to
y
upgrade of product functions.
How to use the ferrite core
y
- (For PW340, PW350 series)
Use the ferrite core to reduce the electromagnetic interference in the PC audio cable.
Wind the PC audio cable on the ferrite core thrice. Place the ferrite core close to the TV.
109
108
OPEN SOURCE LICENSE
1.11. ‘’Source Code’’
means the preferred form of the Covered Code for making modifications to it, including all modules it contains, plus any
associated interface definition files, scripts used to control compilation and installation of an Executable, or source code
differential comparisons against either the Original Code or another well known, available Covered Code of the
Contributor’s choice. The Source Code can be in a compressed
or archival form, provided the appropriate decompression or de-archiving software is widely available for no charge.
ASSEMBLING AND PREPARING
13
Optional Extras
Optional extras can be changed or modified for quality improvement without any notification.
Contact your dealer for buying these items.
This device only works with compatible LG LED LCD TV, LCD TV, or Plasma TV.
1.12. “You’’ (or “Your”)
means an individual or a legal entity exercising rights under, and complying with all of the terms of, this License or a future
version of this License issued under Section 6.1.For legal entities, “You’’ includes any entity which controls, is controlled
by, or is under common control with You. For purposes of this definition, “control’’ means (a) the power, direct or indirect,
to cause the direction or management of such entity, whether by contract or otherwise, or (b) ownership of more than
fifty percent (50%) of the outstanding shares or beneficial ownership of such entity.
2. Source Code License.
2.1. The Initial Developer Grant.
The Initial Developer hereby grants You a world-wide, royalty-free, non-exclusive license, subject to third party intellectual property claims:
(a) under intellectual property rights (other than patent or trademark) Licensable by Initial Developer to use, reproduce,
modify, display, perform, sublicense and distribute the Original Code (or portions thereof) with or without Modifications,
and/or as part of a Larger Work; and
(c) the licenses granted in this Section 2.1(a) and (b) are effective on the date Initial Developer first distributes Original
Code under the terms of this License.
(d) Notwithstanding Section 2.1(b) above, no patent license is granted: 1) for code that You delete from the Original Code;
2) separate from the Original Code; or 3) for infringements caused by: i) the modification of the Original Code or ii) the
combination of the Original Code with other software or devices.
2.2. Contributor Grant.
Subject to third party intellectual property claims, each Contributor hereby grants You a world-wide, royalty-free, nonexclusive license
(a) under intellectual property rights (other than patent or trademark) Licensable by Contributor, to use, reproduce, modify, display, perform, sublicense and distribute the Modifications created by such Contributor (or portions thereof) either
on an unmodified basis, with other Modifications, as Covered Code and/or as part of a Larger Work; and
(b) under Patent Claims infringed by the making, using, or selling of Modifications made by that Contributor either alone
and/or in combination with its Contributor Version (or portions of such combination), to make, use, sell, offer for sale, have
made, and/or otherwise dispose of: 1) Modifications made by that Contributor (or portions thereof); and 2) the combination of Modifications made by that Contributor with its Contributor Version (or portions of such combination).
(c) the licenses granted in Sections 2.2(a) and 2.2(b) are effective on the date Contributor first makes Commercial Use of
the Covered Code.
(d) Notwithstanding Section 2.2(b) above, no patent license is granted: 1) for any code that Contributor has deleted from
the Contributor Version; 2) separate from the Contributor Version; 3) for infringements caused by: i) third party modifications of Contributor Version or ii) the combination of Modifications made by that Contributor with other software (except
as part of the Contributor Version) or other devices; or 4) under Patent Claims infringed by Covered Code in the absence
of Modifications made by that Contributor.
D-sub 15 pin signal cable1
When using the VGA (D-sub 15 pin signal cable) PC connection, use the shielded signal interface cable
with a ferrite core to maintain standards compliance for the product.
ENG
ENGLISH
ENGLISH
ENG
(b) under Patents Claims infringed by the making, using or selling of Original Code, to make, have made, use, practice,
sell, and offer for sale, and/or otherwise dispose of the Original Code (or portions thereof).
3D Glasses
(AG-S230, AG-S250, AG-S270)
14
OPEN SOURCE LICENSE
ASSEMBLING AND PREPARING
Parts and buttons
Mozilla Public License 1.1 (MPL 1.1)
1. Definitions.
PW340, PW350, PW350U, PW350R, PZ200 series
1.0.1. “Commercial Use”
means distribution or otherwise making the Covered Code available to a third party.
Screen
Side Connection panel
1.1. ‘’Contributor’’
means each entity that creates or contributes to the creation of Modifications.
IN 3 USB IN
USB input
1.2. ‘’Contributor Version’’
means the combination of the Original Code, prior Modifications used by a Contributor, and the Modifications made by
that particular Contributor.
VIDEO L/MONO AUDIO R
HDMI input
AV (Audio
and Video)
input
107
Remote control and
intelligent1 sensors
AV IN 2
Speakers
HOME
INPUT
ENTER
CH
VOL
Touch buttons2
1.3. ‘’Covered Code’’
means the Original Code or Modifications or the combination of the Original Code and Modifications, in each case including portions thereof.
1.4. ‘’Electronic Distribution Mechanism’’
means a mechanism generally accepted in the software development community for the electronic transfer of data.
1.5. ‘’Executable’’
means Covered Code in any form other than Source Code.
OPTICAL
DIGITAL
AUDIO OUT
/DVI IN
1.7. ‘’Larger Work’’
means a work which combines Covered Code or portions thereof with code not governed by the terms of this License.
AV IN 1
VIDEO
RGB IN (PC)
L/MONO
AUDIO R
AUDIO IN
(RGB/DVI)
1.8. ‘’License’’
means this document.
REMOTE
CONTROL IN
PB
PR L
RS-232C IN
(CONTROL & SERVICE)
VIDEO
AUDIO
COMPONENT IN
ANTENNA
/CABLE
IN
Rear Connection panel
(See p.71)
Touch button2
Description
1.8.1. “Licensable”
means having the right to grant, to the maximum extent possible, whether at the time of the initial grant or subsequently
acquired, any and all of the rights conveyed herein.
1.9. ‘’Modifications’’
means any addition to or deletion from the substance or structure of either the Original Code or any previous
Modifications. When Covered Code is released as a series of files, a Modification
is:
/I
Turns the power on or off.
INPUT
Changes the input source.
HOME
Accesses the main menus, or saves your input and exits the menus.
ENTER ٜ
Selects the highlighted menu option or confirms an input.
(b) Any new file that contains any part of the Original Code or previous Modifications.
- VOL +
Adjusts the volume level.
v CH ^
Scrolls through the saved channels.
1.10. ‘’Original Code’’
means Source Code of computer software code which is described in the Source Code notice required by Exhibit A as
Original Code, and which, at the time of its release under this License is not already Covered Code governed by this
License.
Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.
All of the buttons are touch sensitive and can be operated through simple touch with your finger.
(a) Any addition to or deletion from the contents of a file containing Original Code or previous Modifications.
1.10.1. “Patent Claims”
means any patent claim(s), now owned or hereafter acquired, including without limitation, method, process, and apparatus claims, in any patent Licensable by grantor.
ENG
ENGLISH
ENGLISH
ENG
1.6. ‘’Initial Developer’’
means the individual or entity identified as the Initial Developer in the Source Code notice required by Exhibit A.
106
OPEN SOURCE LICENSE
ASSEMBLING AND PREPARING
15
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New Libraries
If you develop a new library, and you want it to be of the greatest possible use to the public, we recommend making it
free software that everyone can redistribute and change. You can do so by permitting redistribution under these terms
(or, alternatively, under the terms of the ordinary General Public License).
32LV2500, LV3500 series
Screen
To apply these terms, attach the following notices to the library. It is safest to attach them to the start of each source file
to most effectively convey the exclusion of warranty; and each file should have at least the “copyright” line and a
pointer to where the full notice is found.
 Copyright (C)  
This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later
version.
Remote control and
intelligent1 sensors
Power indicator
This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied
warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public
License for more details.
Speakers
You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the
Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
VOL
CH
ENTER
HOME
ENG
ENGLISH
You should also get your employer (if you work as a programmer) or your school, if any, to sign a “copyright disclaimer”
for the library, if necessary. Here is a sample; alter the names:
Yoyodyne, Inc., hereby disclaims all copyright interest in the library `Frob’ (a library for tweaking knobs) written by James
Random Hacker.
COMPONENT IN
H/P
AV IN 2
PR
/ DVI IN
LAN
ANTENNA /
CABLE IN
AUDIO
That’s all there is to it!
L/MONO AUDIO R
RS-232C IN(CONTROL & SERVICE)
VIDEO
RGB IN(PC)
PB
AV IN 1
signature of Ty Coon, 1 April 1990
Ty Coon, President of Vice
IN
IN 33
(RGB/DVI)
AUDIO IN
VIDEO
OPTICAL
DIGITAL
AUDIO OUT
VIDEO / AUDIO
ENGLISH
ENG
USB IN
IN
USB
Also add information on how to contact you by electronic and paper mail.
Touch buttons2
INPUT
Rear Connection panel
(See p.71)
OPTICAL DIGITAL ANTENNA/
AUDIO OUT
CABLE IN
Touch button2
Description
Turns the power on or off.
INPUT
Changes the input source.
HOME
Accesses the main menus, or saves your input and exits the menus.
ENTER ٜ
Selects the highlighted menu option or confirms an input.
- VOL +
Adjusts the volume level.
v CH ^
Scrolls through the saved channels.
Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.
All of the buttons are touch sensitive and can be operated through simple touch with your finger.
NOTE
You can set the power indicator light to on or off by selecting OPTION in the main menus.
y
16
OPEN SOURCE LICENSE
ASSEMBLING AND PREPARING
105
ditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you
may not distribute the Library at all. For example, if a patent license would not permit royalty-free redistribution of the
Library by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and
this License would be to refrain entirely from distribution of the Library.
19/22/26LV2500
Screen
Side Connection panel
USB input
USB IN
If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section
is intended to apply, and the section as a whole is intended to apply in other circumstances.
It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system
which is implemented by public license practices. Many people have made generous contributions to the wide range of
software distributed through that system in reliance on consistent application of that system; it is up to the author/donor
to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice.
Remote control and
intelligent1 sensors
Headphone
output
Power indicator
12. If the distribution and/or use of the Library is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Library under this License may add an explicit geographical distribution
limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In
such case, this License incorporates the limitation as if written in the body of this License.
Touch buttons2
13. The Free Software Foundation may publish revised and/or new versions of the Lesser General Public License from
time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new
problems or concerns.
Speakers
CH
ANTENNA
IN
CABLE
IN
Rear Connection panel
(See p.71)
14. If you wish to incorporate parts of the Library into other free programs whose distribution conditions are incompatible
with these, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation,
write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two
goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally.
NO WARRANTY
Touch button2
Description
Turns the power on or off.
INPUT
Changes the input source.
HOME
Accesses the main menus, or saves your input and exits the menus.
ENTER ٜ
Selects the highlighted menu option or confirms an input.
- VOL +
Adjusts the volume level.
v CH ^
Scrolls through the saved channels.
Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.
All of the buttons are touch sensitive and can be operated through simple touch with your finger.
NOTE
You can set the power indicator light to on or off by selecting OPTION in the main menus.
y
15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE LIBRARY, TO THE
EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
HOLDERS AND/OR OTHER PARTIES PROVIDE THE LIBRARY “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER
EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE
LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY
SERVICING, REPAIR OR CORRECTION.
16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT
HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE,
BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL
DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS
OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A
FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF SUCH HOLDER OR OTHER PARTY
HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
ENG
ENGLISH
AUDIO R
AUDIO
L/MONO
PR
VIDEO
RS-232C IN(CONTROL & SERVICE)
Each version is given a distinguishing version number. If the Library specifies a version number of this License which
applies to it and “any later version”, you have the option of following the terms and conditions either of that version or
of any later version published by the Free Software Foundation. If the Library does not specify a license version number,
you may choose any version ever published by the Free Software Foundation.
PB
AV IN
VIDEO
DC-IN
/ DVI IN
INPUT
COMPONENT IN
(RGB/DVI)
AUDIO IN
RGB IN (PC)
HOME
ENTER
ENGLISH
ENG
OPTICAL
DIGITAL
AUDIO OUT
VOL
This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.
OPEN SOURCE LICENSE
or source code, so that the user can modify the Library and then relink to produce a modified executable containing the
modified Library. (It is understood that the user who changes the contents of definitions files in the Library will not necessarily be able to recompile the application to use the modified definitions.)
b) Use a suitable shared library mechanism for linking with the Library. A suitable mechanism is one that (1) uses at run
time a copy of the library already present on the user’s computer system, rather than copying library functions into the
executable, and (2) will operate properly with a modified version of the library, if the user installs one, as long as the
modified version is interface-compatible with the version that the work was made with.
c) Accompany the work with a written offer, valid for at least three years, to give the same user the materials specified
in Subsection 6a, above, for a charge no more than the cost of performing this distribution.
ASSEMBLING AND PREPARING
17
LK450 series
Side Connection panel
USB input
Screen
USB IN
104
d) If distribution of the work is made by offering access to copy from a designated place, offer equivalent access to copy
the above specified materials from the same place.
Remote control and
intelligent1 sensors
HDMI input
Power indicator
Headphone
output
AV (Audio
and Video)
input
Speakers
ANTENNA /
CABLE IN
PR
11. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to
patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the con-
Touch buttons2
INPUT
PB
/ DVI IN
b) Give prominent notice with the combined library of the fact that part of it is a work based on the Library, and explaining
where to find the accompanying uncombined form of the same work.
AUDIO
RS-232C IN (CONTROL & SERVICE)
VIDEO L/MONO AUDIO R
RGB IN (PC)
10. Each time you redistribute the Library (or any work based on the Library), the recipient automatically receives a license
from the original licensor to copy, distribute, link with or modify the Library subject to these terms and conditions. You
may not impose any further restrictions on the recipients’ exercise of the rights granted herein. You are not responsible
for enforcing compliance by third parties with this License.
HOME
COMPONENT IN
(RGB/DVI)
AUDIO IN
AV IN 1
a) Accompany the combined library with a copy of the same work based on the Library, uncombined with any other library
facilities. This must be distributed under the terms of the Sections above.
9. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission
to modify or distribute the Library or its derivative works. These actions are prohibited by law if you do not accept this
License. Therefore, by modifying or distributing the Library (or any work based on the Library), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Library or works
based on it.
ENTER
ENG
ENGLISH
OPTICAL DIGITAL
AUDIO OUT
VIDEO
7. You may place library facilities that are a work based on the Library side-by-side in a single library together with other
library facilities not covered by this License, and distribute such a combined library, provided that the separate distribution
of the work based on the Library and of the other library facilities is otherwise permitted, and provided that you do these
two things:
8. You may not copy, modify, sublicense, link with, or distribute the Library except as expressly provided under this
License. Any attempt otherwise to copy, modify, sublicense, link with, or distribute the Library is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under
this License will not have their licenses terminated so long as such parties remain in full compliance.
VOL
CH
AV IN 2
ENGLISH
ENG
It may happen that this requirement contradicts the license restrictions of other proprietary libraries that do not normally
accompany the operating system. Such a contradiction means you cannot use both them and the Library together in an
executable that you distribute.
VIDEO L/MONO AUDIO R
For an executable, the required form of the “work that uses the Library” must include any data and utility programs
needed for reproducing the executable from it. However, as a special exception, the materials to be distributed need not
include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel,
and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable.
IN 3
e) Verify that the user has already received a copy of these materials or that you have already sent this user a copy.
Rear Connection panel
(See p.71)
Touch button2
Description
Turns the power on or off.
INPUT
Changes the input source.
HOME
Accesses the main menus, or saves your input and exits the menus.
ENTER ٜ
Selects the highlighted menu option or confirms an input.
- VOL +
Adjusts the volume level.
v CH ^
Scrolls through the saved channels.
Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.
All of the buttons are touch sensitive and can be operated through simple touch with your finger.
NOTE
You can set the power indicator light to on or off by selecting OPTION in the main menus.
y
18
OPEN SOURCE LICENSE
ASSEMBLING AND PREPARING
103
Library) on a volume of a storage or distribution medium does not bring the other work under the scope of this License.
LK330 series
(For 22LK330)
Buttons2
HOME
INPUT
ENTER
CH
VOL
Side Connection panel
(For 26/32LK330)
3. You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a given copy of
the Library. To do this, you must alter all the notices that refer to this License, so that they refer to the ordinary GNU
General Public License, version 2, instead of to this License. (If a newer version than version 2 of the ordinary GNU
General Public License has appeared, then you can specify that version instead if you wish.) Do not make any other
change in these notices.
Screen
Once this change is made in a given copy, it is irreversible for that copy, so the ordinary GNU General Public License
applies to all subsequent copies and derivative works made from that copy.
CH
This option is useful when you wish to copy part of the code of the Library into a program that is not a library.
USB IN
USB input
VOL
Buttons2
ENTER
HOME
4. You may copy and distribute the Library (or a portion or derivative of it, under Section 2) in object code or executable
form under the terms of Sections 1 and 2 above provided that you accompany it with the complete corresponding
machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange.
IN 3
INPUT
If distribution of object code is made by offering access to copy from a designated place, then offering equivalent access
to copy the source code from the same place satisfies the requirement to distribute the source code, even though third
parties are not compelled to copy the source along with the object code.
Headphone
output
Remote control and
intelligent1 sensors
Speakers
Power indicator
AV IN 2
COMPONENT IN
(RGB/DVI)
AUDIO IN
PR
ANTENNA /
CABLE IN
When a “work that uses the Library” uses material from a header file that is part of the Library, the object code for the
work may be a derivative work of the Library even though the source code is not. Whether this is true is especially significant if the work can be linked without the Library, or if the work is itself a library. The threshold for this to be true is
not precisely defined by law.
PB
AUDIO
/ DVI IN
VIDEO L/MONO AUDIO R
RS-232C IN (CONTROL & SERVICE)
VIDEO
AV IN 1
RGB IN (PC)
However, linking a “work that uses the Library” with the Library creates an executable that is a derivative of the Library
(because it contains portions of the Library), rather than a “work that uses the library”. The executable is therefore covered by this License. Section 6 states terms for distribution of such executables.
OPTICAL DIGITAL
AUDIO OUT
Button2
Rear Connection panel
(See p.71)
Description
/I
Turns the power on or off.
INPUT
Changes the input source.
HOME
Accesses the main menus, or saves your input and exits the menus.
ENTER ٜ
Selects the highlighted menu option or confirms an input.
- VOL +
Adjusts the volume level.
v CH ^
Scrolls through the saved channels.
5. A program that contains no derivative of any portion of the Library, but is designed to work with the Library by being
compiled or linked with it, is called a “work that uses the Library”. Such a work, in isolation, is not a derivative work of
the Library, and therefore falls outside the scope of this License.
Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.
NOTE
You can set the power indicator light to on or off by selecting OPTION in the main menus.
y
If such an object file uses only numerical parameters, data structure layouts and accessors, and small macros and small
inline functions (ten lines or less in length), then the use of the object file is unrestricted, regardless of whether it is
legally a derivative work. (Executables containing this object code plus portions of the Library will still fall under Section
6.)
Otherwise, if the work is a derivative of the Library, you may distribute the object code for the work under the terms of
Section 6. Any executables containing that work also fall under Section 6, whether or not they are linked directly with the
Library itself.
6. As an exception to the Sections above, you may also combine or link a “work that uses the Library” with the Library
to produce a work containing portions of the Library, and distribute that work under terms of your choice, provided that
the terms permit modification of the work for the customer’s own use and reverse engineering for debugging such
modifications.
You must give prominent notice with each copy of the work that the Library is used in it and that the Library and its use
are covered by this License. You must supply a copy of this License. If the work during execution displays copyright
notices, you must include the copyright notice for the Library among them, as well as a reference directing the user to
the copy of this License. Also, you must do one of these things:
a) Accompany the work with the complete corresponding machine-readable source code for the Library including whatever changes were used in the work (which must be distributed under Sections 1 and 2 above); and, if the work is an
executable linked with the Library, with the complete machine-readable “work that uses the Library”, as object code and/
ENG
ENGLISH
ENGLISH
ENG
AV (Audio
and Video)
input
VIDEO L/MONO AUDIO R
HDMI input
102
OPEN SOURCE LICENSE
ASSEMBLING AND PREPARING
19
A “library” means a collection of software functions and/or data prepared so as to be conveniently linked with application
programs (which use some of those functions and data) to form executables.
The “Library”, below, refers to any such software library or work which has been distributed under these terms. A “work
based on the Library” means either the Library or any derivative work under copyright law: that is to say, a work containing the Library or a portion of it, either verbatim or with modifications and/or translated straightforwardly into another
language. (Hereinafter, translation is included without limitation in the term “modification”.)
LK430 series
Side Connection panel
Screen
“Source code” for a work means the preferred form of the work for making modifications to it. For a library, complete
source code means all the source code for all modules it contains, plus any associated interface definition files, plus the
scripts used to control compilation and installation of the library.
USB IN
Activities other than copying, distribution and modification are not covered by this License; they are outside its scope.
The act of running a program using the Library is not restricted, and output from such a program is covered only if its
contents constitute a work based on the Library (independent of the use of the Library in a tool for writing it). Whether
that is true depends on what the Library does and what the program that uses the Library does.
CH
USB input
VOL
ENTER
Buttons2
HOME
AV (Audio
and Video)
input
Power indicator
AV IN 2
COMPONENT IN
(RGB/DVI)
AUDIO IN
ANTENNA /
CABLE IN
PR
/ DVI IN
AUDIO
RS-232C IN (CONTROL & SERVICE)
VIDEO L/MONO AUDIO R
c) You must cause the whole of the work to be licensed at no charge to all third parties under the terms of this License.
PB
AV IN 1
RGB IN (PC)
VIDEO
b) You must cause the files modified to carry prominent notices stating that you changed the files and the date of any
change.
OPTICAL DIGITAL
AUDIO OUT
a) The modified work must itself be a software library.
d) If a facility in the modified Library refers to a function or a table of data to be supplied by an application program that
uses the facility, other than as an argument passed when the facility is invoked, then you must make a good faith effort
to ensure that, in the event an application does not supply such function or table, the facility still operates, and performs
whatever part of its purpose remains meaningful.
Remote control and
intelligent1 sensors
Speakers
These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the
Library, and can be reasonably considered independent and separate works in themselves, then this License, and its
terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same
sections as part of a whole which is a work based on the Library, the distribution of the whole must be on the terms of
this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the
intent is to exercise the right to control the distribution of derivative or collective works based on the Library.
In addition, mere aggregation of another work not based on the Library with the Library (or with a work based on the
Rear Connection panel
(See p.71)
Button2
(For example, a function in a library to compute square roots has a purpose that is entirely well-defined independent of
the application. Therefore, Subsection 2d requires that any application-supplied function or table used by this function
must be optional: if the application does not supply it, the square root function must still compute square roots.)
ENG
ENGLISH
ENGLISH
ENG
2. You may modify your copy or copies of the Library or any portion of it, thus forming a work based on the Library, and
copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of
these conditions:
Headphone
output
VIDEO L/MONO AUDIO R
You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in
exchange for a fee.
HDMI input
IN 3
INPUT
1. You may copy and distribute verbatim copies of the Library’s complete source code as you receive it, in any medium,
provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of
warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and distribute a copy
of this License along with the Library.
Description
/I
Turns the power on or off.
INPUT
Changes the input source.
HOME
Accesses the main menus, or saves your input and exits the menus.
ENTER ٜ
Selects the highlighted menu option or confirms an input.
- VOL +
Adjusts the volume level.
v CH ^
Scrolls through the saved channels.
Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.
NOTE
You can set the power indicator light to on or off by selecting OPTION in the main menus.
y
20
OPEN SOURCE LICENSE
ASSEMBLING AND PREPARING
101
surrender these rights. These restrictions translate to certain responsibilities for you if you distribute copies of the library
or if you modify it.
LK520 series
Side Connection panel
For example, if you distribute copies of the library, whether gratis or for a fee, you must give the recipients all the rights
that we gave you. You must make sure that they, too, receive or can get the source code. If you link other code with the
library, you must provide complete object files to the recipients, so that they can relink them with the library after making
changes to the library and recompiling it. And you must show them these terms so they know their rights.
Screen
We protect your rights with a two-step method: (1) we copyright the library, and (2) we offer you this license, which gives
you legal permission to copy, distribute and/or modify the library.
USB input
USB IN
CH
VOL
ENTER
Buttons
To protect each distributor, we want to make it very clear that there is no warranty for the free library. Also, if the library
is modified by someone else and passed on, the recipients should know that what they have is not the original version,
so that the original author’s reputation will not be affected by problems that might be introduced by others.
HOME
Headphone
output
AV (Audio
and Video)
input
VIDEO L/MONO AUDIO R
HDMI input
IN 3
INPUT
Remote control and
intelligent1 sensors
Speakers
Power indicator
Most GNU software, including some libraries, is covered by the ordinary GNU General Public License. This license, the
GNU Lesser General Public License, applies to certain designated libraries, and is quite different from the ordinary
General Public License. We use this license for certain libraries in order to permit linking those libraries into non-free
programs.
AV IN 2
COMPONENT IN
(RGB/DVI)
AUDIO IN
PR
ANTENNA /
CABLE IN
We call this license the “Lesser” General Public License because it does Less to protect the user’s freedom than the
ordinary General Public License. It also provides other free software developers Less of an advantage over competing
non-free programs. These disadvantages are the reason we use the ordinary General Public License for many libraries.
However, the Lesser license provides advantages in certain special circumstances.
PB
AUDIO
/ DVI IN
VIDEO L/MONO AUDIO R
RS-232C IN (CONTROL & SERVICE)
VIDEO
AV IN 1
RGB IN (PC)
When a program is linked with a library, whether statically or using a shared library, the combination of the two is legally
speaking a combined work, a derivative of the original library. The ordinary General Public License therefore permits such
linking only if the entire combination fits its criteria of freedom. The Lesser General Public License permits more lax criteria for linking other code with the library.
Rear Connection panel
(See p.71)
Button2
Description
/I
Turns the power on or off.
INPUT
Changes the input source.
HOME
Accesses the main menus, or saves your input and exits the menus.
ENTER ٜ
Selects the highlighted menu option or confirms an input.
- VOL +
Adjusts the volume level.
v CH ^
Scrolls through the saved channels.
For example, on rare occasions, there may be a special need to encourage the widest possible use of a certain library,
so that it becomes a de-facto standard. To achieve this, non-free programs must be allowed to use the library. A more
frequent case is that a free library does the same job as widely used non-free libraries. In this case, there is little to gain
by limiting the free library to free software only, so we use the Lesser General Public License.
In other cases, permission to use a particular library in non-free programs enables a greater number of people to use a
large body of free software. For example, permission to use the GNU C Library in non-free programs enables many more
people to use the whole GNU operating system, as well as its variant, the GNU/Linux operating system.
Although the Lesser General Public License is Less protective of the users’ freedom, it does ensure that the user of a
program that is linked with the Library has the freedom and the wherewithal to run that program using a modified version
of the Library.
The precise terms and conditions for copying, distribution and modification follow. Pay close attention to the difference
between a “work based on the library” and a “work that uses the library”. The former contains code derived from the
library, whereas the latter must be combined with the library in order to run.
Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
NOTE
You can set the power indicator light to on or off by selecting OPTION in the main menus.
y
0. This License Agreement applies to any software library or other program which contains a notice placed by the copyright holder or other authorized party saying it may be distributed under the terms of this Lesser General Public License
(also called “this License”). Each licensee is addressed as “you”.
ENG
ENGLISH
ENGLISH
ENG
OPTICAL DIGITAL
AUDIO OUT
Finally, software patents pose a constant threat to the existence of any free program. We wish to make sure that a
company cannot effectively restrict the users of a free program by obtaining a restrictive license from a patent holder.
Therefore, we insist that any patent license obtained for a version of the library must be consistent with the full freedom
of use specified in this license.
100 OPEN SOURCE LICENSE
ASSEMBLING AND PREPARING
applies to it and “any later version”, you have the option of following the terms and conditions either of that version or
of any later version published by the Free Software Foundation. If the Program does not specify a version number of this
License, you may choose any version ever published by the Free Software Foundation.
10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different,
write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to
the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of
preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software
generally.
Lifting and moving the TV
Setting up the TV
When moving or lifting the TV, read the following
to prevent the TV from being scratched or
damaged and for save transportation regardless of
its type and size.
If you are not mounting the TV to a wall, use the
following instructions to attach the stand.
CAUTION
Avoid touching the screen at all times, as
y
this may result in damage to the screen.
NO WARRANTY
11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO
THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER
EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE
PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL
NECESSARY SERVICING, REPAIR OR CORRECTION.
It is recommended to move the TV in the
y
box or packing material that the TV originally
came in.
Before moving or lifting the TV, disconnect
y
the power cord and all cables.
When holding the TV, the screen should face
y
away from you to prevent damage.
Preamble
The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU
General Public Licenses are intended to guarantee your freedom to share and change free software--to make sure the
software is free for all its users.
This license, the Lesser General Public License, applies to some specially designated software packages--typically
libraries--of the Free Software Foundation and other authors who decide to use it. You can use it too, but we suggest you
first think carefully about whether this license or the ordinary General Public License is the better strategy to use in any
particular case, based on the explanations below.
When we speak of free software, we are referring to freedom of use, not price. Our General Public Licenses are designed
to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish);
that you receive source code or can get it if you want it; that you can change the software and use pieces of it in new
free programs; and that you are informed that you can do these things.
To protect your rights, we need to make restrictions that forbid distributors to deny you these rights or to ask you to
1 Lay the TV with the screen side down on a flat
surface.
CAUTION
Lay a foam mat or soft protective cloth
y
on the surface to protect the screen from
damage. Make sure no objects press
against the screen.
the STAND BASE of the TV.
Hold the top and bottom of the TV frame
y
firmly. Make sure not to hold the transparent
part, speaker, or speaker grill area.
GNU Lesser General Public License
[This is the first released version of the Lesser GPL. It also counts as the successor of the GNU Library Public License,
version 2, hence the version number 2.1.]
PW340, PW350, PW350U, PW350R, PZ200 series
2 Assemble the parts of the STAND BODY with
END OF TERMS AND CONDITIONS
Version 2.1, February 1999
Copyright (C) 1991, 1999 Free Software Foundation, Inc. 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
Attaching the stand
When transporting a large TV, there should
y
be at least 2 people.
When transporting the TV by hand, hold the
y
TV as shown in the following illustration.
When transporting the TV, do not expose the
y
TV to jolts or excessive vibration.
When transporting the TV, keep the TV
y
upright, never turn the TV on its side or tilt
towards the left or right.
Model
Screw for
assembly
Number of
screws
42/50PW340
42/50PW350
42/50PW350U
42/50PW350R
50PZ200
60PZ200
M5 x 14.5
M4 x 25
ENG
ENGLISH
ENGLISH
ENG
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT
HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED
ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL
DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO
LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR
A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER
PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
21
22
OPEN SOURCE LICENSE
ASSEMBLING AND PREPARING
3 Secure the TV and the stand with the 4
screws.
To detach the stand,
1 Lay the TV with the screen side down on a flat
Model
Screw for
assembly
Number of
screws
42/50PW340
42/50PW350
42/50PW350U
42/50PW350R
50PZ200
60PZ200
M4 x 26
M4 x 28
surface.
2 Remove the 4 screws and pull the stand away
from the TV.
Model
Screw for
assembly
Number of
screws
42/50PW340
42/50PW350
42/50PW350U
42/50PW350R
50PZ200
60PZ200
M4 x 26
M4 x 28
99
The source code for a work means the preferred form of the work for making modifications to it. For an executable work,
complete source code means all the source code for all modules it contains, plus any associated interface definition files,
plus the scripts used to control compilation and installation of the executable. However, as a special exception, the
source code distributed need not include anything that is normally distributed (in either source or binary form) with the
major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that
component itself accompanies the executable.
If distribution of executable or object code is made by offering access to copy from a designated place, then offering
equivalent access to copy the source code from the same place counts as distribution of the source code, even though
third parties are not compelled to copy the source along with the object code.
4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License. Any
attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate your
rights under this License. However, parties who have received copies, or rights, from you under this License will not
have their licenses terminated so long as such parties remain in full compliance.
5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission
to modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not accept this
License. Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your
acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Program
or works based on it.
CAUTION
3 Push the supplied protection cover into the
opening at the bottom of the TV until it locks in
place.
Attach the protection cover tape.
- This will protect the opening from
accumulating dust and dirt.
- When installing the wall mounting bracket,
use the Protection cover.
6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a
license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You
may not impose any further restrictions on the recipients’ exercise of the rights granted herein. You are not responsible
for enforcing compliance by third parties to this License.
7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to
patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the
conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to
satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence
you may not distribute the Program at all. For example, if a patent license would not permit royalty-free redistribution of
the Program by all those who receive copies directly or indirectly through you, then the only way you could satisfy both
it and this License would be to refrain entirely from distribution of the Program.
If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section
is intended to apply and the section as a whole is intended to apply in other circumstances.
Protection
cover tape
Protection cover
It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest
validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution
system, which is implemented by public license practices. Many people have made generous contributions to the wide
range of software distributed through that system in reliance on consistent application of that system; it is up to the
author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot
impose that choice.
This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.
8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded.
In such case, this License incorporates the limitation as if written in the body of this License.
9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to
time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems
or concerns.
Each version is given a distinguishing version number. If the Program specifies a version number of this License which
ENG
ENGLISH
ENGLISH
ENG
Tighten the screws firmly to prevent
y
the TV from tilting forward. Do not over
tighten.
98
OPEN SOURCE LICENSE
1. You may copy and distribute verbatim copies of the Program’s source code as you receive it, in any medium, provided
that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and give any other
recipients of the Program a copy of this License along with the Program.
You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in
exchange for a fee.
2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program,
and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all
of these conditions:
a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any
change.
b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program
or any part thereof, to be licensed as a whole at no charge to all third parties under the terms of this License.
c) If the modified program normally reads commands interactively when run, you must cause it, when started running
for such interactive use in the most ordinary way, to print or display an announcement including an appropriate copyright
notice and a notice that there is no warranty (or else, saying that you provide a warranty) and that users may redistribute
the program under these conditions, and telling the user how to view a copy of this License. (Exception: if the Program
itself is interactive but does not normally print such an announcement, your work based on the Program is not required
to print an announcement.)
ASSEMBLING AND PREPARING
LV3500 series
To detach the stand,
1 Lay the TV with the screen side down on a flat
surface.
CAUTION
Lay a foam mat or soft protective cloth
y
on the surface to protect the screen from
damage. Make sure no objects press
against the screen.
surface.
2 Remove the 4 screws and pull the stand away
from the TV.
Model
Screw for
assembly
Number of
screws
32/37/42/47/55
LV3500
M4 x 12
the STAND BASE of the TV.
Model
Screw for
assembly
Number of
screws
32/37/42/47/55
LV3500
M4 x 12
ENG
ENGLISH
ENGLISH
ENG
3 Secure the TV and the stand with the 4
In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the
Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this License.
1 Lay the TV with the screen side down on a flat
2 Assemble the parts of the STAND BODY with
These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the
Program, and can be reasonably considered independent and separate works in themselves, then this License, and its
terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same
sections as part of a whole which is a work based on the Program, the distribution of the whole must be on the terms
of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part
regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the
intent is to exercise the right to control the distribution of derivative or collective works based on the Program.
23
screws.
Model
Screw for
assembly
Number of
screws
32/37/42/47/55
LV3500
M4 x 12
3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form
under the terms of Sections 1 and 2 above provided that you also do one of the following:
a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under the
terms of Sections 1 and 2 above on a medium customarily used for software interchange; or,
b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your
cost of physically performing source distribution, a complete machine-readable copy of the corresponding source code,
to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or,
c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This alternative is allowed only for noncommercial distribution and only if you received the program in object code or executable
form with such an offer, in accord with Subsection b above.)
CAUTION
Tighten the screws firmly to prevent
y
the TV from tilting forward. Do not over
tighten.
24
OPEN SOURCE LICENSE
ASSEMBLING AND PREPARING
LV2500 series
GNU GENERAL PUBLIC LICENSE
To detach the stand,
1 Lay the TV with the screen side down on a flat
surface.
CAUTION
Lay a foam mat or soft protective cloth
y
on the surface to protect the screen from
damage. Make sure no objects press
against the screen.
2 Assemble the parts of the STAND BODY with
the STAND BASE of the TV.
Model
Screw for
assembly
Number of
screws
19/22/26/32
LV3500
M4 x 6
97
1 Lay the TV with the screen side down on a flat
surface.
2 Remove the 2 screws and pull the stand away
from the TV.
Model
Screw for
assembly
Number of
screws
19/22/26/32
LV3500
M4 x 16
Version 2, June 1991
Copyright (C) 1989, 1991 Free Software Foundation, Inc.
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA
Everyone is permitted to copy and distribute verbatim copies
of this license document, but changing it is not allowed.
Preamble
The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU
General Public License is intended to guarantee your freedom to share and change free software--to make sure the
software is free for all its users. This General Public License applies to most of the Free Software Foundation’s software
and to any other program whose authors commit to using it. (Some other Free Software Foundation software is covered
by the GNU Lesser General Public License instead.) You can apply it to your programs, too.
When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to
make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish), that
you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free
programs; and that you know you can do these things.
To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the software,
or if you modify it.
We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal
permission to copy, distribute and/or modify the software.
3 Secure the TV and the stand with the 2
screws.
Model
Screw for
assembly
Number of
screws
19/22/26/32
LV3500
M4 x 16
Also, for each author’s protection and ours, we want to make certain that everyone understands that there is no warranty for this free software. If the software is modified by someone else and passed on, we want its recipients to know
that what they have is not the original, so that any problems introduced by others will not reflect on the original authors’
reputations.
Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors
of a free program will individually obtain patent licenses, in effect making the program proprietary. To prevent this, we
have made it clear that any patent must be licensed for everyone’s free use or not licensed at all.
The precise terms and conditions for copying, distribution and modification follow.
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
CAUTION
Tighten the screws firmly to prevent
y
the TV from tilting forward. Do not over
tighten.
0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it
may be distributed under the terms of this General Public License. The “Program”, below, refers to any such program
or work, and a “work based on the Program” means either the Program or any derivative work under copyright law: that
is to say, a work containing the Program or a portion of it, either verbatim or with modifications and/or translated into
another language. (Hereinafter, translation is included without limitation in the term “modification”.) Each licensee is
addressed as “you”.
Activities other than copying, distribution and modification are not covered by this License; they are outside its scope.
The act of running the Program is not restricted, and the output from the Program is covered only if its contents constitute a work based on the Program (independent of having been made by running the Program). Whether that is true
depends on what the Program does.
ENG
ENGLISH
ENGLISH
ENG
For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the
rights that you have. You must make sure that they, too, receive or can get the source code. And you must show them
these terms so they know their rights.
96
OPEN SOURCE LICENSE
ASSEMBLING AND PREPARING
OPEN SOURCE LICENSE
22LK330
To detach the stand,
1 Lay the TV with the screen side down on a flat
surface.
Open source software notice
CAUTION
Please be informed that LG Electronics products may contain open source software listed in the tables
below.
License
Component
OpenSSL license
- openssl
MIT license
- libcurl
- ncurses
expat license
- expat
Freetype license
- freetype
JPEG license
- libjpeg
Zlib/libpng license
- libmng
- libpng
- md5 checksum
- tinyxml
- zlib
- libicu
BSD license
- strace
- xySSL
RSA data security license
- MD5
LG Electronics products may also contain open source software listed as Components in the table below,
and you may download the complete source code thereof free of charge, from LG Electronics website
(http://opensource.lge.com) for a period of three (3) years from our last shipment of this product. Please be
informed that the open source software is subject to the terms and conditions of the applicable open
source licenses, which are provided to you hereinbelow.
License
Component
GNU GPL v2.0
- Linux kernel 2.6
- busybox
- e2fsprogs
- gdbserver
- jfsutils
- mtd-utils
- procps
- u-boot
- udhcpc
GNU LGPL v2.1
- directFB
- gconv
- glibc
MPL 1.1
- nanox
Lay a foam mat or soft protective cloth
y
on the surface to protect the screen from
damage. Make sure no objects press
against the screen.
1 Lay the TV with the screen side down on a flat
surface.
2 Remove the screws and pull the stand away
from the TV.
2 Assemble the TV as shown.
3 Push the supplied protection cover into the
opening at the bottom of the TV until it locks in
place.
This will protect the opening from accumulating
dust and dirt.
When installing the wall mounting bracket, use
the Protection cover.
ENG
ENGLISH
ENGLISH
ENG
X.net license
25
Protection cover
26
EXTERNAL CONTROL DEVICE SETUP
ASSEMBLING AND PREPARING
26/32LK330, LK430, LK450, LK520 series
Lay the TV with the screen side down on a flat
surface.
To detach the stand,
1 Lay the TV with the screen side down on a flat
Lay a foam mat or soft protective cloth
y
on the surface to protect the screen from
damage. Make sure no objects press
against the screen.
Main/Sub
Picture
surface.
2 Remove the 4 screws and pull the stand away
CAUTION
from the TV.
Two/One
Part
Channel
Using
Physical
Channel
22/26LK330
M4 x 20
32/42LK430
32/37/42/47 LK450
42/47/55LK520
Step
Main
Two
Use
NTSC Air
Sub
One
No Use
NTSC Cable
ATSC Air
ATSC Cable_std
ATSC Cable_hrc
ATSC Cable_irc
ATSC cable_auto
Reserved
Number of
screws
...
Reserved
Screw for
assembly
22/26LK330
M4 x 20
32/42LK430
32/37/42/47 LK450
42/47/55LK520
opening at the bottom of the TV until it locks in
place.
This will protect the opening from accumulating
dust and dirt.
When installing the wall mounting bracket, use
the Protection cover.
The binary code to tune the sub source to an NTSC
cable channel is “1000 0001”, which translates to
“81” in Hex.
* 7th bit : For which source do you want to change
the channel.
* 6th bit: Use a two part or one part channel. Most
cases just use 0 since it’s ignored when using
NTSC.
* 5th bit: Use 0 with NTSC since it can only use
the physical channel number. Normally use 1 for
ATSC since most times it doesn’t matter what the
physical number is.
* 4th bit: Set to 0.
* 3-0 bits: Choose signal type.
* Tune Command Examples:
1. Tune to the analog (NTSC) cable channel 35.
Data 00 = Physical of 35 = 23
Data 01 & 02 = No Major = 00 00
Data 03 & 04 = No Minor = 00 00
Data 05 = 0000 0001 in binary = 01
Total = ma 00 23 00 00 00 00 01
Number of
screws
2. Tune to the digital (ATSC) local channel 30-3.
Data 00 = Don’t know Physical = 00
Data 01 & 02 = Major is 30 = 00 1E
Data 03 & 04 = Minor is 3 = 00 03
Data 05 = 0010 0010 in binary = 22
Total = ma 00 00 00 1E 00 03 22
Protection cover
22. Channel Add/Del (Command: m b)
To add and delete the channels.
Transmission [m][b][ ][Set ID][ ][Data][Cr]
Data 00: Channel Delete Data 01: Channel Add
CAUTION
Tighten the screws firmly to prevent
y
the TV from tilting forward. Do not over
tighten.
Acknowledgement [b][ ][Set ID][ ][OK/NG][Data][x]
23. Key (Command: m c)
To send IR remote key code.
Transmission [m][c][ ][Set ID][ ][Data][Cr]
Acknowledgement [c][ ][Set ID][ ][OK/NG][Data][x]
When TV is in the standby mode, TV will turn on by
POWER button of remote control only.
24. Backlight (Command: m g) (
To adjust screen backlight.
LCD
Transmission [m][g][ ][Set ID][ ][Data][Cr]
Data Min:00 ~ Max:64 (*transmit by Hexadecimal
code)
*Refer to “Real data mapping”.
Acknowledgement [g][ ][Set ID][ ][OK/NG][Data][x]
ENG
ENGLISH
ENGLISH
ENG
screws.
22/26LK330
M4 x 20
32/42LK430
32/37/42/47 LK450
42/47/55LK520
3 Secure the TV and the stand with the 4
Screw for
assembly
Model
3 Push the supplied protection cover into the
Model
the STAND BASE of the TV.
Screw for
assembly
Number of
screws
2 Assemble the parts of the STAND BODY with
Model
Reserved
95
94
EXTERNAL CONTROL DEVICE SETUP
12. OSD Select (Command: k l)
To select OSD (On Screen Display) on/off.
Transmission [k][l][ ][Set ID][ ][Data][Cr]
Data 00: OSD off
Data 01: OSD on
Acknowledgement [l][ ][Set ID][ ][OK/NG][Data][x]
13. Remote Control Lock Mode (Command: k m)
To lock the remote control and the front panel
controls on the set.
Transmission [k][m][ ][Set ID][ ][Data][Cr]
Data 00: Lock off
Data 01: Lock on
Acknowledgement [m][ ][Set ID][ ][OK/NG][Data][x]
If you’re not using the remote control and front panel
controls on the Monitor set, use this mode. When
main power is on/off, remote control lock is released.
If Key Lock is on in the standby mode, TV will not
turn on by POWER button of remote control and on
the TV.
ASSEMBLING AND PREPARING
18. ISM Method (Command: j p) (
To avoid having a fixed image remain on screen.
Plasma
Transmission [j][p][ ][Set ID][ ][Data][Cr]
Data 02: Orbiter
04: White Wash
08: Normal
20: Color Wash
Mounting on a table
1 Lift and tilt the TV into its upright position on a
table.
- Leave a 10 cm (4 inches) (minimum) space
from the wall for proper ventilation.
Acknowledgement [p][ ][Set ID][ ][OK/NG][Data][x]
19. Energy Saving (Command: j q)
To control the energy saving function.
27
Securing the TV to a table
(For 26/32LK330, 32/42LK430, 32/37/42LK450,
42LK520, 32LV3500)
Fix the TV to a table to prevent from tilting
forward, damage, and potential injury.
Mount the TV on a table, and then insert and
tighten the supplied screw on the rear of the
stand.
10 cm (4 inches)
Transmission [ j ][q][ ][Set ID][ ][Data][Cr]
Data 00: off
01: Minimum
02: Medium
03: Maximum
04: Auto/Intelligent sensor (depending on model)
05: Screen off
10 cm
10 cm
10 cm
Acknowledgement [q][ ][Set ID][ ][OK/NG][Data][x]
14. Treble (Command: k r)
To adjust treble.
You can also adjust treble in the AUDIO menu.
Transmission [k][r][ ][Set ID][ ][Data][Cr]
Acknowledgement [r][ ][Set ID][ ][OK/NG][Data][x]
15. Bass (Command: k s)
To adjust bass.
You can also adjust bass in the AUDIO menu.
Transmission [k][s][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal
code)
*Refer to “Real data mapping”.
Acknowledgement [s][ ][Set ID][ ][OK/NG][Data][x]
16. Balance (Command: k t)
To adjust balance.
You can also adjust balance in the AUDIO menu.
Transmission [k][t][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal
code)
*Refer to “Real data mapping”.
Acknowledgement [t][ ][Set ID][ ][OK/NG][Data][x]
17. Color Temperature (Command: x u)
To adjust color temperature.
You can also adjust color temperature in the
PICTURE menu.
Transmission [x][u][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal
code)
*Refer to “Real data mapping”.
Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x]
Transmission [ j ][u][ ][Set ID][ ][Data][Cr]
Data 01: To set
Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x]
21. Channel Tuning (Command: m a)
To tune channel to following physical/major/minor
number.
Transmission [m][a][ ][Set ID][ ][Data00][ ][Data01]
[ ][Data02][ ][Data03][ ][Data04][ ][Data05][Cr]
Digital channels have a Physical, Major, and Minor
channel number. The Physical number is the actual
digital channel number, the Major is the number that
the channel should be mapped to, and the Minor is
the sub-channel. Since the ATSC tuner automatically
maps the channel to the Major number, the Physical
number is not required when sending a command.
Data 00: Physical Channel Number
NTSC air: 02~45, NTSC cable: 01, 0E~7D
ATSC air: 01~45, ATSC cable: 01~87
Data 01 & 02: Major Channel Number
Data 01: High byte
Data 02: Low byte
Two bytes are available for the Major and Minor,
normally only the second byte is used.
Data 03 & 04: Minor Channel Number
Not needed for NTSC.
The table above lists the binary code which must
be converted to Hexadecimal before sending. For
example:
2 Connect the power cord to a wall outlet.
WARNING
CAUTION
Do not place the TV near or on sources
y
of heat, as this may result in fire or other
damage.
NOTE
Swivel 20 degrees to the left or right and
y
adjust the angle of the TV to suit your
view.
20
20
To prevent TV from falling over, the TV
y
should be securely attached to the floor/wall
per installation instructions. Tipping, shaking,
or rocking the TV may cause injury.
ENG
ENGLISH
ENGLISH
ENG
Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal
code)
*Refer to “Real data mapping”.
20. Auto Configuration (Command: j u)
To adjust picture position and minimize image
shaking automatically. Auto configuration only works
in RGB-PC mode.
28
EXTERNAL CONTROL DEVICE SETUP
ASSEMBLING AND PREPARING
Securing the TV to a wall (optional)
Using the Kensington security system (optional)
The Kensington security system connector is
located at the rear of the TV. For more information
of installation and using, refer to the manual
provided with the Kensington security system or
visit http://www.kensington.com.
Connect the Kensington security system cable
between the TV and a table.
01. Power (Command: k a)
To control Power On/Off of the set.
Transmission [k][a][ ][Set ID][ ][Data][Cr]
Data 00: Power Off
Data 01: Power On
Acknowledgement [a][ ][Set ID][ ][OK/NG][Data][x]
* In a like manner, if other functions transmit ‘FF’
data based on this format, Acknowledgement data
feedback presents status about each function.
* Note: In this model, set will send the Acknowledge
after power on processing completion.
There might be a time delay between command and
acknowledge.
02. Input Select (Command: x b)
To select input source for set.
Transmission [x][b][ ][Set ID][ ][Data][Cr]
and bolts on the back of the TV.
- If there are bolts inserted at the eye-bolts
position, remove the bolts first.
2 Mount the wall brackets with the bolts to the
with a sturdy rope.
Make sure to keep the rope horizontal with the
flat surface.
CAUTION
Make sure that children do not climb on or
y
hang on the TV.
NOTE
* Use the feature depending on your model.
03. Aspect Ratio (Command: k c)
To adjust the screen format.
Acknowledgement [f][ ][Set ID][ ][OK/NG][Data][x]
07. Contrast (Command: k g)
To adjust screen contrast.
You can also adjust contrast in the PICTURE menu.
Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal
code)
*Refer to “Real data mapping”.
Acknowledgement [g][ ][Set ID][ ][OK/NG][Data][x]
08. Brightness (Command: k h)
To adjust screen brightness.
You can also adjust brightness in the PICTURE
menu.
Transmission [k][h][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal
code)
*Refer to “Real data mapping”.
Acknowledgement [h][ ][Set ID][ ][OK/NG][Data][x]
Transmission [k][c][ ][Set ID][ ][Data][Cr]
Data 01: 4:3
Data: 09: Just scan
Data 02: 16:9
Data: 10: Cinema Zoom 1
Data 04: Zoom
Data 06: Set by program Data 1F: Cinema Zoom16
…
3 Connect the eye-bolts and wall brackets tightly
Acknowledgement [b][ ][Set ID][ ][OK/NG][Data][x]
The Kensington security system is optional.
y
You can obtain additional accessories from
your local dealer.
Transmission [k][f][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal
code)
*Refer to “Real data mapping”.
Acknowledgement [c][ ][Set ID][ ][OK/NG][Data][x]
04. Screen Mute (Command: k d)
To select screen mute on/off.
09. Color (Command: k i)
To adjust screen color.
You can also adjust color in the PICTURE menu.
Transmission [k][i][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal
code)
*Refer to “Real data mapping”.
Acknowledgement [i][ ][Set ID][ ][OK/NG][Data][x]
Transmission [k][d][ ][Set ID][ ][Data][Cr]
NOTE
Use a platform or cabinet that is strong and
y
large enough to support the TV securely.
Brackets, bolts and ropes are optional. You
y
can obtain additional accessories from your
local dealer.
Data 00: Screen mute off (Picture on), Video-out
Mute off
Data 01: Screen mute on (Picture off)
Data 10: Video-out Mute on
Acknowledgement [d][ ][Set ID][ ][OK/NG][Data][x]
* In case of Video-out Mute on only, TV will display On
Screen Display (OSD). But, in case of screen mute on,
TV will not display On Screen Display (OSD).
05. Volume Mute (Command: k e)
To control volume mute on/off.
You can also adjust mute using the MUTE button on
remote control.
Transmission [k][e][ ][Set ID][ ][Data][Cr]
Data 00: Volume mute on (Volume off)
Data 01: Volume mute off (Volume on)
Acknowledgement [e][ ][Set ID][ ][OK/NG][Data][x]
10. Tint (Command: k j)
To adjust screen tint.
You can also adjust tint in the PICTURE menu.
Transmission [k][j][ ][Set ID][ ][Data][Cr]
Data Red: 00 ~ Green: 64 (*transmit by Hexadecimal
code)
*Refer to “Real data mapping”.
Acknowledgement [ j ][ ][Set ID][ ][OK/NG][Data][x]
11. Sharpness (Command: k k)
To adjust screen sharpness.
You can also adjust sharpness in the PICTURE menu.
Transmission [k][k][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal
code)
*Refer to “Real data mapping”.
Acknowledgement [k][ ][Set ID][ ][OK/NG][Data][x]
ENG
ENGLISH
ENGLISH
ENG
wall.
Match the location of the wall bracket and the
eye-bolts on the rear of the TV.
06. Volume Control (Command: k f)
To adjust volume.
You can also adjust volume with the volume buttons
on remote control.
Transmission [k][g][ ][Set ID][ ][Data][Cr]
Data 00: DTV (Antenna) Data 01: DTV (Cable)
Data 10: Analog (Antenna) Data 11: Analog (Cable)
Data 20: AV or AV1
Data 21: AV2
Data 40: Component or Component1
Data 41: Component2
Data 60: RGB-PC
Data 90: HDMI1
Data 91: HDMI2
Data 92: HDMI3
Data 93: HDMI4
1 Insert and tighten the eye-bolts, or TV brackets
93
92
EXTERNAL CONTROL DEVICE SETUP
Transmission / Receiving protocol
Transmission
[Command1][Command2][ ][Set ID][ ][Data][Cr]
[Command 1] : First command to control the set.(j, k, m or x)
[Command 2] : Second command to control the set.
[Set ID] : You can adjust the set ID to choose desired set ID number in Option menu. Adjustment range is
1~ 99. When selecting Set ID ‘0’, every connected the set is controlled. Set ID is indicated as decimal (1~
99) on menu and as Hexa decimal (0x0~ 0x63) on transmission /receiving protocol.
[DATA] : To transmit the command data.
Transmit the ‘FF’ data to read status of command.
[Cr] : Carriage Return
ASCII code ‘0x0D’
[ ] : ASCII code ‘space (0x20)’
* In this model, set will not send the status during the standby mode.
ASSEMBLING AND PREPARING
Mounting on a wall
Attach an optional wall mount at the rear of the TV
carefully and install the wall mount on a solid wall
perpendicular to the floor. When you attach the TV
to other building materials, please contact qualified
personnel.
42/47/55LV3500
55LK520
VESA (A x B)
Standard screw
Number of screws
Wall mount bracket
(optional)
200 x 200
M6
LSW200B,
LSW200BG
400 x 400
M6
LSW400B,
LSW400BG,
DSW400BG
10 cm
10 cm
10 cm
Make sure to use screws and wall mounts that
meet the VESA standard. Standard dimensions for
the wall mount kits are described in the following
table.
Model
42/50PW340
42/50PW350
42/50PW350U
42/50PW350R
50PZ200
60PZ200
VESA (A x B)
Standard screw
Number of screws
Wall mount bracket
(optional)
400 x 400
M6
PSW400B,
PSW400BG,
DSW400BG
600 x 400
M8
PSW600B
Model
19/22/26LV2500 32LV2500
22/26LK330
32LV3500
32LK330
32LK430
32LK450
VESA (A x B)
Standard screw
Number of screws
Wall mount bracket
(optional)
100 x 100
M4
LSW100B,
LSW100BG
Error Acknowledgement
[Command2][ ][Set ID][ ][NG][Data][x]
The set transmits ACK (acknowledgement) based on this format when receiving abnormal data from nonviable functions or communication errors.
Data1: Illegal Code
Data2: Not supported function
Data3: Wait more time
* In this model, set will not send the status during the standby mode.
* Data Format
[Command 2] : Use as command.
[Set ID] : Use the small character, if set ID is 10, it will send the ‘0’, ‘a’.
[DATA] : Use the small character, if data is 0 x ab, it will send the ‘a’, ‘b’.
[NG] : Use the large character
37LV3500
42LK430
37/42/47LK450
42/47LK520
200 x 100
M4
LSW100B,
LSW100BG
CAUTION
Disconnect the power first, and then move
y
or install the TV. Otherwise electric shock
may occur.
If you install the TV on a ceiling or slanted
y
wall, it may fall and result in severe injury.
Use an authorized LG wall mount and contact
the local dealer or qualified personnel.
Do not over tighten the screws as this may
y
cause damage to the TV and void your
warranty.
Use the screws and wall mounts that meet
y
the VESA standard. Any damages or injuries
by misuse or using an improper accessory
are not covered by the warranty.
NOTE
Use the screws that are listed on the VESA
y
standard screw specifications.
The wall mount kit includes an installation
y
manual and necessary parts.
The wall mount bracket is optional. You can
y
obtain additional accessories from your local
dealer.
The length of screws may differ depending
y
on the wall mount. Make sure to use the
proper length.
For more information, refer to the manual
y
supplied with the wall mount.
ENG
ENGLISH
ENGLISH
ENG
The set transmits ACK (acknowledgement) based on this format when receiving normal data. At this time,
if the data is data read mode, it indicates present status data. If the data is data write mode, it returns the
data of the PC computer.
* In this model, set will not send the status during the standby mode.
* Data Format
[Command 2] : Use as command.
[Set ID] : Use the small character, if set ID is 10, it will send the ‘0’, ‘a’.
[DATA] : Use the small character, if data is 0 x ab, it will send the ‘a’, ‘b’.
[OK] : Use the large character.
Model
10 cm (4 inches)
OK Acknowledgement
[Command2][ ][Set ID][ ][OK][Data][x]
29
30
EXTERNAL CONTROL DEVICE SETUP
ASSEMBLING AND PREPARING
Tidying cables
Communication Parameters
PW340, PW350, PW350U, PW350R, PZ200 series
1 Install the power cord holder and power cord.
It will help prevent the power cable from being
removed by accident.
22LK330, LV2500, LV3500 series
1 Gather and bind the cables with the cable
holder.
Command reference list
Cable holder
(For 60PZ200)
Power cord holder
2 Gather and bind the cables with the cable
holder.
26/32LK330, LK430, LK450, LK520 series
1 Gather and bind the cables with the cable
management clip.
Cable holder
CAUTION
Cable management clip
COMMAND1
COMMAND2
DATA
(Hexadecimal)
COMMAND1
COMMAND2
DATA
(Hexadecimal)
00 - 01
14. Treble
00 - 64
02. Input Select x
(See p.93)
15. Bass
00 - 64
03. Aspect
Ratio
(See p.93)
16. Balance
00 - 64
04. Screen
Mute
00 - 01
17. Color
Temperature
00 - 64
05. Volume
Mute
00 - 01
18. ISM
Method (
(See p.94)
06. Volume
Control
00 - 64
19. Energy
Saving
(See p.94)
(See p.94)
00 - 01
Plasma
07. Contrast
00 - 64
20. Auto
Configuration
08. Brightness
00 - 64
22. Channel
Add/Del
09. Color
00 - 64
23. Key
(See p.95)
00 - 64
24. Backlight
( LCD )
00 - 64
10. Tint
11. Sharpness
00 - 64
12. OSD Select k
00 - 01
13. Remote
Control
Lock Mode
00 - 01
21. Channel
Tuning
COMMAND1 COMMAND2
DATA00
DATA01
DATA02
DATA03
DATA04
DATA05
(Hexadecimal) (Hexadecimal) (Hexadecimal) (Hexadecimal) (Hexadecimal) (Hexadecimal)
physical
program
high
major
program
low
major low
minor high minor low
attribute
When setting the 17 to 24, a menu does not appear on screen.
y
Note : During USB operations such as Dvix or EMF, all commands except Power(ka) and Key(mc) are
y
not executed and treated as NG.
ENG
ENGLISH
ENGLISH
ENG
2 Fix the cable management clip firmly to the TV.
Do not move the TV by holding the cable
y
holder and power cord holder, as the cable
holders may break, and injuries and damage
to the TV may occur.
Stop bit: 1 bit
y
Communication code: ASCII code
y
Use a crossed (reverse) cable.
y
Baud rate: 9600 bps (UART)
y
Data length: 8 bits
y
Parity : None
y
01. Power
(Other models)
91
90
EXTERNAL CONTROL DEVICE SETUP
REMOTE CONTROL
RS-232C configurations
31
REMOTE CONTROL
Set ID
Set ID number.
7-Wire Configuration
(Serial female-female NULL modem cable)
PC
237,21
TV
ᯒ0RYHᯙ(QWHU
ؒ /DQJXDJH
ؒ &DSWLRQ
RXD
TXD
TXD
RXD
2II
ؒ 3RZHU,QGLFDWRU
ؒ ,QLWLDO6HWWLQJ
GND
GND
DTR
DSR
DSR
DTR
RTS
CTS
CTS
RTS
D-Sub 9
D-Sub 9
ؒ 6HW,'

ؒ 0RGH6HWWLQJ
+RPH8VH
ᯙ
ᯐ
The descriptions in this manual are based on the buttons of the remote
control.
Please read this manual carefully and use the TV correctly.
To replace batteries, open the battery cover, replace batteries (1.5 V AAA)
matching and ends to the label inside the compartment, and close
the battery cover. Be sure to point the remote control at the remote control
sensor on the TV.
CAUTION
1 Press Home to access the main menus.
Do not mix old and new batteries, as this may damage the remote control.
y
2 Press the Navigation buttons to scroll to
OPTION and press ENTER.
Make sure to point the remote control at the remote control sensor on the TV.
3 Press the Navigation buttons to scroll to Set ID
POWER
Turns the TV on or off.
and press ENTER.
3-Wire Configurations(Not standard)
PC
4 Scroll left or right to select a set ID number and
TV
select CLOSE. The adjustment range is 1-99.
ENERGY SAVING (See p.61)
Adjusts the Energy Saving settings.
ENERGY AV MODE INPUT
TV
TXD
TXD
RXD
GND
GND
DTR
DSR
DSR
DTR
FLASHBK
RTS
CTS
CTS
RTS
D-Sub 9
5 When you are finished, press EXIT.
SAVING
LIST
AV MODE (See p.41)
Selects an AV mode.
INPUT (See p.41)
Rotates through inputs.
Also switches the TV on from standby.
TV
Returns to the last TV channel.
D-Sub 9
Alphanumeric buttons
Enters letters and numbers.
ENERGY AV MODE INPUT
TV
SAVING
FLASHBK
LIST
LIST (See p.37)
Accesses the saved channel list.
- (Dash)
Inserts a dash between numbers such as 2-1 and 2-2.
FLASHBK
Alternates between the two last channels selected (pressing repeatedly);
Selects a channel on the currently selected channel list.
ENG
ENGLISH
ENGLISH
ENG
RXD
32
EXTERNAL CONTROL DEVICE SETUP
REMOTE CONTROL
89
EXTERNAL CONTROL DEVICE SETUP
MARK
FAV
VOL
3D
CH
MUTE
INFO
Home Q.MENU
VOL
Adjusts the volume level.
RS-232C Setup
MARK
Selects a menu or option.
FAV (See p.37)
Accesses your favorite channel list.
Connect the RS-232C (serial port) input jack to
an external control device (such as a computer or
an A/V control system) to control the product’s
functions externally.
Connect the serial port of the control device to the
RS-232C jack on the product back panel.
3D (See p.44)
Used for viewing 3D video.
ENTER
Type of connector;
D-Sub 9-Pin Male
MUTE
Mutes all sounds.
CH
Scrolls through the saved channels.
PAGE
Moves to the previous or next screen.
EXIT
BACK
RS-232C IN
(CONTROL & SERVICE)
VOL
Adjusts the volume level.
VOL
RATIO
CH
MUTE
INFO
Home Q.MENU
MARK
Selects a menu or option.
FAV (See p.37)
Accesses your favorite channel list.
RATIO (See p.40)
Resizes an image.
ENTER
BACK
MUTE
Mutes all sounds.
EXIT
CH
Scrolls through the saved channels.
PAGE
Moves to the previous or next screen.
RS-232C on this unit is intended to be used
y
with third party RS-232C control hardware
and software. The instructions below
are provided to help with programming
software or to test functionality using telenet
software. RS-232C connection cables are not
supplied with the product.
Pin name
No connection
RXD (Receive data)
TXD (Transmit data)
DTR (DTE side ready)
GND
DSR (DCE side ready)
RTS (Ready to send)
CTS (Clear to send)
No Connection
ENG
ENGLISH
ENGLISH
ENG
NOTE
FAV
RS-232C IN
(CONTROL & SERVICE)
No.
MARK
88
IR CODES
Code
(Hexa)
REMOTE CONTROL
Function
Note
Code
(Hexa)
Function
Note
POWER
Remote control Button
(Power On/Off)
0F
TV
Remote control Button
DC
3D
Remote control Button
45
Q.MENU
Remote control Button
5B
EXIT
Remote control Button
43
Home
Remote control Button
D6
TV
0B
INPUT
Remote control Button
Discrete IR Code
(TV Input Selection)
10 - 19
Number Key 0-9
Remote control Button
4C
- (Dash)/LIST
Remote control Button
1A
FLASHBK
Remote control Button
MUTE/DELETE
Remote control Button
VOL +
Remote control Button
VOL -
Remote control Button
CH ^
Remote control Button
CH v
Remote control Button
1E
FAV/MARK
Remote control Button
40
Remote control Button
41
Remote control Button
Remote control Button
Remote control Button
44
ENTER
Remote control Button
28
BACK
Remote control Button
RATIO
Remote control Button
FREEZE
Remote control Button
95
ENERGY SAVING
Remote control Button
7E
SIMPLINK
Remote control Button
AA
INFO
Remote control Button
30
AV MODE
Remote control Button
72
RED
Remote control Button
71
GREEN
Remote control Button
63
YELLOW
Remote control Button
61
BLUE
Remote control Button
B1
Remote control Button
B0
Remote control Button
BA
\\
Remote control Button
8E
XX
Remote control Button
8F
WW
Remote control Button
BA (
Plasma
INFO
Home Q.MENU
INFO (See p.38)
Views the information of the current program.
Home
Accesses the main menus, or saves your input and exit the menus.
ENTER
Q. MENU (See p.42)
Accesses the quick menu.
C4
POWER ON
Discrete IR Code
(Only Power On)
C5
POWER OFF
Discrete IR Code
(Only Power Off)
5A
AV1
Discrete IR Code
(AV1 Input Selection)
D0
AV2
Discrete IR Code
(AV2 Input Selection)
SIMPLINK (See p.76)
Accesses the AV devices connected to the TV;
Opens the SIMPLINK menu.
BF
COMPONENT1
Discrete IR Code
(Component1 Input
Selection)
EXIT
Clears all on-screen displays and returns to TV viewing.
D4
COMPONENT2
Discrete IR Code
(Component2 Input
Selection)
D5
RGB-PC
Discrete IR Code
(RGB-PC Input Selection)
BACK
CE
HDMI1
Discrete IR Code
(HDMI1 Input Selection)
CC
HDMI2
Discrete IR Code
(HDMI2 Input Selection)
E9
HDMI3
Discrete IR Code
(HDMI3 Input Selection)
DA
HDMI4 (
76
Ratio 4:3
Discrete IR Code
(Only 4:3 Mode)
77
Ratio 16:9
Discrete IR Code
(Only 16:9 Mode)
AF
Ratio Zoom
Discrete IR Code
(Only Zoom Mode)
LCD
Discrete IR Code
(HDMI4 Input Selection)
EXIT
Navigation buttons (up/down/left/right)
Scrolls through menus or options.
BACK
Allows the user to move back one step in an interactive application or
other user interaction function.
3D SETTING
Colored buttons
These access special functions in some menus.
3D SETTING ( Plasma ) (See p.46)
Used for viewing 3D video.
FREEZE
RATIO
Control buttons
Controls the SIMPLINK compatible devices (USB,SIMPLINK).
FREEZE ( Plasma )
Freezes the current frame (Not supported when using USB Mode and
Simplink.).
RATIO (See p.40)
Resizes an image.
ENG
ENGLISH
ENGLISH
ENG
08
79
33
34
IR CODES
WATCHING TV
87
IR CODES
WATCHING TV
(Depending on model)
Connecting to an antenna or
cable
Connect an antenna, cable, or cable box to watch
TV referring to the following. The illustrations
may differ from the actual items and a RF cable is
optional.
Connecting a cable box
Connect the TV to a cable box and the cable box
to a wall antenna socket with 2 RF cables (75 Ί).
How to Connect
Connect your wired remote control to the Remote Control port on the TV.
Remote Control IR Codes
Output waveform
Single pulse, modulated with 37.917kHz signal at 455kHz
Connecting an antenna or basic
cable
Tc
Connect the TV to a wall antenna socket with a
RF cable (75 Ί).
T1
Frame configuration
1st frame
Lead code
Low custom code
High custom code
Data code
Data code
Repeat frame
Repeat code
Tf
Lead code
9 ms
4.5 ms
Repeat code
0.55 ms
9 ms
CAUTION
Make sure not to bend the copper wire of
y
the RF cable.
2.25 ms
Bit description
Bit “0”
Bit “1”
0.56 ms
0.56 ms
NOTE
Use a signal splitter to use more than 2 TVs.
y
If the image quality is poor, install a signal
y
amplifier properly to improve the image
quality.
If the image quality is poor with an antenna
y
connected, aim the antenna to the proper
direction.
Visit http://lgknowledgebase.com for more
y
information about the antenna and cable
connection. Search for antenna.
Copper wire
2.24 ms
1.12 ms
Frame interval: Tf
Complete all connections between devices,
y
and then connect the power cord to the
power outlet to prevent damage to your TV.
The waveform is transmitted as long as a key is depressed.
Tf
Tf
Tf=108ms @455KHz
ENG
ENGLISH
ENGLISH
ENG
C0 C1 C2 C3 C4 C5 C6 C7 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 D0 D1 D2 D3 D4 D5 D6 D7
86
SPECIFICATIONS
WATCHING TV
Video Supported Formats
Turning the TV on for the first
time
File
Video Decoder
Extension
name
Audio Codec
mpg, mpeg
MPEG1, MPEG2
MP2, MP3, Dolby Digital, LPCM
dat
MPEG1
MP2
ts, trp, tp
MPEG2, H.264, AVS, VC1
MP2, MP3, Dolby Digital, AAC, HE-AAC
vob
MPEG1, 2
MP2, MP3, Dolby Digital, LPCM
mp4, mov
MPEG4,DivX 3.11, DivX 4.12,
DivX 5.x, DivX 6, Xvid 1.00, Xvid
1.01, Xvid 1.02, Xvid 1.03, Xvid
1.10-beta1/2H.264
AAC, HE-AAC, MP3
mkv
H.264, MPEG-1,2,4
MP2, MP3, Dolby Digital, AAC
HE-AAC, LPCM
divx, avi
MPEG2, MPEG4, DivX 3.11, DivX
4, DivX 5, DivX 6, Xvid 1.00, Xvid
1.01, Xvid 1.02, Xvid 1.03, Xvid
1.10-beta1/2H.264
MP2, MP3, Dolby Digital, LPCM,
ADPCM, AAC, HE-AAC
Motion JPEG
(avi, mp4, mkv)
JPEG
asf, wmv
VC1
WMA
flv
Sorenson H.263, H264
MP3, AAC
Max Resolution
35
4 When the basic settings are complete,
press ENTER.
NOTE
When you turn the TV on for the first time, the
Initial setting screen appears. Select a language
and customize the basic settings.
1 Connect the power cord to a power outlet.
The Power indicator turns red and the TV
switches to Standby mode.
If you do not complete the Initial setting,
y
it will appear whenever the TV turns on.
Disconnect the power cord from the
y
power outlet when you do not use the
TV for a long period of time.
5 To turn the TV off, press POWER.
1920 x 1080 @ 30p
(Only Motion JPEG
640x480@30p)
LPCM, ADPCM
2 In Standby mode, press POWER to turn the
TV on.
The Initial setting screen appears if you turn
the TV on for the first time.
NOTE
You can also access Initial Setting by
y
accessing OPTION in the main menu.
3 Follow the on-screen instructions to customize
your TV settings according to your preferences.
Ø
Signal
Resolution
720p
1280x720
1080i
Vertical
Frequency
(Hz)
44.96 / 45.00
89.90 / 90.00
33.72 / 33.75
HDMI Input
1080p
USB Input
Horizontal
Frequency
(kHz)
1920x1080 27.00
53.95 / 54.00
Playable 3D video format
Top & Bottom, Side by Side
59.94 / 60.00
HDMI (V. 1.4 with HDMI 3D) Frame Packing
Top & Bottom, Side by Side
Top & Bottom, Side by Side, Checker Board
Single Frame Sequential
67.432 / 67.50
1080p
Selects a language to
display.
24.00
Top & Bottom, Side by Side, Checker Board
23.98 / 24.00 HDMI (V. 1.4 with HDMI 3D) Frame Packing
33.75
30.00
Top & Bottom, Side by Side
Checker Board
1920x1080 33.75
30.00
Top & Bottom, Side by Side
Checker Board, MPO (Photo)
Resolution
Playable 3D video format
Other Resolution
Top & Bottom, Side by Side
Component
(For Plasma
TV)
720p
1280x720
44.96 / 45.00
59.94 / 60.00
1080i
1920x1080 33.72 / 33.75
59.94 / 60.00
Signal
Playable 3D video format
DTV
720p, 1080i
Top & Bottom, Side by Side
Top & Bottom, Side by Side
Mode Setting
Selects Home Use for
the home environment.
Ø
Power Indicator
(LED LCD TV)
Sets the power indicator.
Ø
Time Zone
Selects the time zone
and daylight saving.
Ø
Auto Tuning
Scans and saves available
channels automatically.
NOTE
To display images in the best quality for
y
your home environment, select Home
Use.
Store Demo is suitable for the retail
y
environment.
If you select Store Demo, any
y
customized settings will switch back to
the default settings of Store Demo in 3
minutes.
Power Indicator feature is disabled in
y
Store Demo mode.
ENG
ENGLISH
ENGLISH
ENG
Language
3D Supported Formats
36
SPECIFICATIONS
WATCHING TV
Watching TV
Managing channels
1 In Standby mode, press POWER to turn the TV
Setting up channels
on.
2 Press INPUT and select TV.
3 Control the TV using the following buttons
while you are watching TV.
Button
CH (^, v)
LIST1
0-9
Description
Scrolls through saved channels.
Selects a channel on the saved
channel list.
Selects a channel by entering
numbers.
Adjusts the volume level.
MUTE
Mutes all sounds.
AV MODE2
Selects an AV mode (See p.41).
Q.MENU
Accesses the quick menus
(See p.42).
FLASHBK
Alternates between the last two
channels selected.
RATIO
Resizes an image (See p.40).
FREEZE
Freezes the current frame while you
are watching TV ( Plasma ).
1 The Lock icon (ᯢ) appears in front of a
channel blocked with parental control.
2 Each AV mode has the optimized image and
sound settings. If you select Off, the image
and sound settings will be restored to the
previously customized settings.
To store channels automatically,
1 Press Home to access the main menus.
2 Press the Navigation buttons to scroll to
CHANNEL and press ENTER.
3 Press the Navigation buttons to scroll to Auto
Tuning and press ENTER.
4 Select Start to start automatic tuning.
The TV scans and saves available channels
automatically.
The TV switches to Standby mode.
720x400
31.469
70.08
640x480
31.469
59.94
800x600
37.879
60.31
1024x768
48.363
60.00
1360x768
47.712
60.015
1280x1024
63.981
60.02
1920x1080
RGB-PC
66.587
59.934
1920x1080
HDMI-PC
67.5
60.00
For 50/60PZ250, 22LV2500,
32/37/42/47/55LV3500, 32/42LK430,
32/37/42/47LK450, 42/47/55LK520
Resolution
Horizontal
Vertical
Frequency (KHz) Frequency (Hz)
720x480i
15.73
15.73
59.94
60.00
720x480p
31.47
31.50
59.94
60.00
1280x720p
44.96
45.00
59.94
60.00
1920x1080i
33.72
33.75
59.94
60.00
1920x1080p
26.97
27.00
33.71
33.75
67.432
67.50
23.976
24.00
29.97
30.00
59.94
60.00
NOTE
If the TV scans and saves channels,
y
the previously saved channels will be
overwritten.
5 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
To store channels manually,
HDMI (DTV) supported mode
Resolution
2 Press the Navigation buttons to scroll
3 Press the Navigation buttons to scroll to
Horizontal
Vertical
Frequency (KHz) Frequency (Hz)
720x480p
31.47
31.50
59.94
60.00
1280x720p
44.96
45.00
59.94
60.00
1920x1080i
33.72
33.75
59.94
60.00
1920x1080p
26.97
27.00
33.71
33.75
67.432
67.50
23.976
24.00
29.97
30.00
59.94
60.00
1 Press Home to access the main menus.
CHANNEL and press ENTER.
4 To turn the TV off, press POWER.
Horizontal
Vertical
Frequency (KHz) Frequency (Hz)
Manual Tuning and press ENTER.
4 Scroll through the channel types, and then add
or delete channels.
Component port connecting information
Component ports on the
TV
PB
PR
5 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
NOTE
If the TV scans a blocked channel, you will
y
be prompted to enter your password to keep
the channel scanned.
You can store up to 1000 channels. The
y
number of channels that you can store
differs depending on the broadcasting signal
environment.
The channels are stored in the order of DTV,
y
TV, Cable DTV and Cable TV.
Video output ports
on DVD player
PB
PR
B-Y
R-Y
Cb
Cr
Pb
Pr
ENG
ENGLISH
ENGLISH
ENG
VOL (+, -)
Storing channels
Component supported mode
RGB (PC), HDMI (PC) supported mode
Resolution
85
84
SPECIFICATIONS
WATCHING TV
MODELS
Dimensions
(W x H x D)
With stand
Without stand
Weight
42LK520
(42LK520-UA)
47LK520
(47LK520-UA)
1019.0 mm x 698.0 mm x 265.0 mm
(40.1 inch x 27.4 inch x 10.4 inch)
1137.0 mm x 758.0 x 270.0 mm
(44.7 inch x 29.8 inch x 10.6 inch)
1019.0 mm x 631.0 mm x 76.5 mm
(40.1 inch x 24.8 inch x 3.0 inch)
1137.0 mm x 685.0 mm x 76.8 mm
(44.7 inch x 26.9 inch x 3.0 inch)
With stand
15.1 kg (33.2 lbs)
20.3 kg (44.7 lbs)
Without stand
13.4 kg (29.5 lbs)
18.3 kg (40.3 lbs)
Editing your channel list
Using favorite channels
Press Home to access the main menus.
2 Press the Navigation buttons to scroll to
CHANNEL and press ENTER.
Press the Navigation buttons to scroll to
Channel Edit and press ENTER.
4 Edit channels using the following buttons.
Dimensions
(W x H x D)
Weight
Highlights the channel type.
Setting up your favorite list
1 Select a channel to add to the favorite list.
2 Press FAV.
3 Press the Navigation buttons to select your
desired favorite channel group.
4 Press the Yellow button to register or cancel
1329.0 mm x 872.0 mm x 330.0 mm
(52.3 inch x 34.3 inch x 12.9 inch)
^, v, < , >
Scrolls through channel types or
channels.
Without stand
1329.0 mm x 796.0 mm x 96.5 mm
(52.3 inch x 31.3 inch x 3.7 inch)
ENTER
Selects the highlighted channel to
view.
CH (^, v)
Moves to the previous or next
page.
Blue button
Adds or deletes a channel.
The deleted channel displays in
blue.
6 Press ENTER to add the selected channel to
FAV
Registers or cancels the current
channel in favorite channel list.
7 When you are finished, press EXIT.
Q.MENU
Selects your desired favorite
channel group.
With stand
33.0 kg (72.7 lbs)
Without stand
28.8 kg (63.4 lbs)
With stand
Without stand
With stand
32LV3520
(32LV3520-UC)
42LV3520
(42LV3520-UC)
Yellow
button
Blocks or unblocks a channel.
Without stand
the current channel in favorite channel list.
Press the Blue button to move to Channel Edit.
5 Press the Navigation buttons to scroll to
Favorite.
the favorite list.
NOTE
You can also setup Favorite List in the
y
CHANNEL menu - Channel Edit.
5 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
Selecting a channel on the favorite list
1 Press FAV to access the favorite list.
Selecting a channel on the channel list
1 Press LIST to access the channel list.
- To move to the previous or next page, press
CH (^, v).
- To tune to the "CHANNEL menu - Channel
Edit, press Blue button.
2 Select a channel you want and press ENTER.
NOTE
The Lock icon (ᯢ) appears in front of a
y
channel blocked with parental control.
If you select the blocked channel, you will be
y
prompted to enter your password.
- To move to the previous or next page, press
CH (^, v).
2 Select a channel you want and press ENTER.
ENG
ENGLISH
ENGLISH
ENG
Weight
Description
Add the channels that you watch frequently to the
favorite list.
With stand
MODELS
Dimensions
(W x H x D)
Button
55LK520
(55LK520-UA)
MODELS
37
38
SPECIFICATIONS
WATCHING TV
Checking current program info
MODELS
Press ENTER to view the information of the currently program while you are watching.
The following information appears at the top of the screen.
Banner information

ᯌ'79
Program title
End time
&11
Current time
%ULHI,QIR7LWOH7HVW
$0
ᱏ᯻
Dimensions
(W x H x D)
Weight
With stand
526.0 mm x 377.0 mm x 164.9 mm 663.0 mm x 484.0 mm x 206.8 mm
(26.1 inch x 19.0 inch x 8.1 inch)
(20.7 inch x 14.8 inch x 6.4 inch)
Without stand
526.0 mm x 331.0 mm x 65.0 mm
(20.7 inch x 13.0 inch x 2.5 inch)
663.0 mm x 423.0 mm x 79.9 mm
(26.1 inch x 16.6 inch x 3.1 inch)
With stand
4.3 kg (9.4 lbs)
7.3 kg (16.0 lbs)
Without stand
4.0 kg (8.8 lbs)
6.2 kg (13.6 lbs)
$0 ᯵0XOWLOLQJXDO᯸᯿&DSWLRQᰇLᯢ793*'/69
Progress bar
Weight
Description
Multilingual
᯾
The program contains two or more audio language services. You can change the
audio language using the quick menu.
Dolby Digital
᯸
The program contains a Dolby Digital audio signal in TV and HDMI input sources.
With stand
805.0 mm x 583.0 mm x 224.0 mm
(31.6 inch x 22.9 inch x 8.8 inch)
Without stand
805.0 mm x 528.0 mm x 79.9 mm
(31.6 inch x 20.7 inch x 3.1 inch)
With stand
10.8 kg (23.8 lbs)
Without stand
9.7 kg (21.3 lbs)
᯿
The program contains one or more language caption services. You can change the
caption language using the quick menu.
Aspect ratio
ᰆ
ᰇ
The original aspect ratio of the video is 4:3.
The original aspect ratio of the video is 16:9 (wide).
Resolution
L
S
S
L
S
The video resolution is 720 x 480i.
The video resolution is 720 x 480p.
The video resolution is 1280 x 720p.
The video resolution is 1920 x 1080i.
The video resolution is 1920 x 1080p.
Dimensions
(W x H x D)
Weight
ᯢ
The program contains Rating information.
See "LOCK Settings" on p.67.
Dimensions
(W x H x D)
Weight
799.0 mm x 555.0 mm x 207.0 mm 1023.0 mm x 685.0 mm x 261.0 mm
(31.4 inch x 21.8 inch x 8.1 inch) (40.2 inch x 26.9 inch x 10.2 inch)
Without stand
799.0 mm x 506.0 mm x 73.5 mm 1023.0 mm x 635.0 mm x 76.6 mm
(40.2 inch x 25.0 inch x 3.0 inch)
(31.4 inch x 19.9 inch x 2.8 inch)
With stand
9.1 kg (20.0 lbs)
15.1 kg (33.2 lbs)
Without stand
8.1 kg (17.8 lbs)
13.5 kg (29.7 lbs)
32LK450
(32LK450-UB)
37LK450
(37LK450-UB)
With stand
795.0 mm x 568.0 mm x 207.0 mm 913.0 mm x 639.0 mm x 265.0 mm
(31.2 inch x 22.3 inch x 8.1 inch)
(35.9 inch x 25.1 inch x 10.4 inch)
Without stand
795.0 mm x 504.0 mm x 73.5 mm 913.0 mm x 571.0 mm x 77.4 mm
(31.2 inch x 19.8 inch x 2.8 inch)
(35.9 inch x 22.4 inch x 3.0 inch)
With stand
9.2 kg (20.2 lbs)
12.8 kg (28.2 lbs)
Without stand
8.1 kg (17.8 lbs)
11.1 kg (24.4 lbs)
42LK450
(42LK450-UB)
47LK450
(47LK450-UB)
MODELS
Dimensions
(W x H x D)
Weight
42LK430
(42LK430-UA)
With stand
MODELS
Rating
32LK430
(32LK430-UA)
With stand
1019.0 mm x 698.0 mm x 265.0 mm 1132.0 mm x 762.0 mm x 265.0 mm
(40.1 inch x 27.4 inch x 10.4 inch)
(44.5 inch x 30.0 inch x 10.4 inch)
Without stand
1019.0 mm x 631.0 mm x 76.5 mm
(40.1 inch x 24.8 inch x 3.0 inch)
1132.0 mm x 695.0 mm x 76.5 mm
(44.5 inch x 27.3 inch x 3.0 inch)
With stand
15.1 kg (33.2 lbs)
19.0 kg (41.8 lbs)
Without stand
13.4 kg (29.5 lbs)
17.3 kg (38.1 lbs)
ENG
ENGLISH
ENGLISH
ENG
MODELS
Caption
32LK330
(32LK330-UA)
MODELS
Dimensions
(W x H x D)
Icon
26LK330
(26LK330-UA)
6XQ)HE$0
1H[W$01HZV
Start time
22LK330
(22LK330-UA)
83
82
SPECIFICATIONS
WATCHING TV
MODELS
Dimensions
(W x H x D)
Weight
Weight
455.2 mm x 355.0 mm x 145.0 mm 471.2 mm x 365.9 mm x 155.4 mm
(17.9 inch x 13.9 inch x 5.7 inch)
(18.5 inch x 14.4 inch x 6.1 inch)
Without stand
455.2 mm x 313.1 mm x 40.9 mm 471.2 mm x 315.5 mm x 34.4 mm
(17.9 inch x 12.3 inch x 1.6 inch)
(18.5 inch x 12.4 inch x 1.3 inch)
With stand
2.7 kg (5.9 lbs)
3.4 kg (7.4 lbs)
Without stand
2.5 kg (5.5 lbs)
3.2 kg (7.0 lbs)
635.6 mm x 475.0 mm x 169.0 mm 777.4 mm x 551.3 mm x 234.0 mm
(30.6 inch x 21.7 inch x 9.2 inch)
(25.0 inch x 18.7 inch x 6.6 inch)
Without stand
635.6 mm x 413.5 mm x 40.9 mm 777.4 mm x 501.3 mm x 35.4 mm
(25.0 inch x 16.2 inch x 1.6 inch)
(30.6 inch x 19.7 inch x 1.3 inch)
Weight
Weight
%ULHI,QIR7LWOH7HVW
$0
$0 ᯵0XOWLOLQJXDO᯸᯿&DSWLRQᰇLᯢ793*'/69
1RLQIRUPDWLRQ
6DUDK%UDGOH\6WHYH*UD\DQG%UHQGRQ3RQJLDSUHVHQWWKHODWHVWLQIDVKLRQWKHDUWVHQWHUWDLQPHQWOLIHVW\OHDQGFRRNLQJ
ZLWKUHJXODUDQGVSHFLDOJXHVWV
ᯕ8S
6DUDK%UDGOH\6WHYH*UD\DQG%UHQGRQ3RQJLDSUHVHQWWKHODWHVWLQIDVKLRQWKHDUWVHQWHUWDLQPHQWOLIHVW\OHDQGFRRNLQJ ᯕ'RZQ
᯹
Button
Description
5.4 kg (11.9 lbs)
11.9 kg (26.2 lbs)
INFO
Shows current channel information.
Without stand
5.0 kg (11.0 lbs)
10.7 kg (23.5 lbs)
< or >
Shows previous or next channel
information.
^ or v
Changes a channel.
32LV3500
(32LV3500-UA)
37LV3500
(37LV3500-UA)
With stand
764.1 mm x 544.7 mm x 240.0 mm 763.1 mm x 545.3 mm x 240.0 mm
(30.0 inch x 21.4 inch x 9.4 inch)
(30.0 inch x 21.4 inch x 9.4 inch)
Without stand
764.1 mm x 483.6 mm x 40.4 mm 763.1 mm x 483.1 mm x 40.4 mm
(30.0 inch x 19.0 inch x 1.5 inch)
(30.0 inch x 19.0 inch x 1.5 inch)
With stand
11.2 kg (24.6 lbs)
13.1 kg (28.8 lbs)
Without stand
9.4 kg (20.7 lbs)
11.3 kg (24.9 lbs)
42LV3500
(42LV3500-UA)
47LV3500
(47LV3500-UA)
With stand
997.2 mm x 684.2 mm x 256.6 mm 1107.0 mm x 745.5 mm x 256.3 mm
(39.2 inch x 26.9 inch x 10.1 inch)
(43.5 inch x 29.3 inch x 10.0 inch)
Without stand
997.2 mm x 614.7 mm x 40.1 mm
(39.2 inch x 24.2 inch x 1.5 inch)
1107.0 mm x 676.5 mm x 40.1 mm
(43.5 inch x 26.6 inch x 1.5 inch)
With stand
15.5 kg (34.1 lbs)
20.9 kg (46.0 lbs)
Without stand
13.3 kg (29.3 lbs)
18.7 kg (41.2 lbs)
MODELS
Dimensions
(W x H x D)
ᯐ&K&KDQJH‫۽‬1H[Wᯙ:DWFK
With stand
MODELS
Dimensions
(W x H x D)
32LV2500
(32LV2500-UA)
ᯌ'79&11
55LV3500
(55LV3500-UA)
With stand
1285.9 mm x 847.3 mm x 338.0 mm
(50.6 inch x 33.3 inch x 13.3 inch)
Without stand
1285.9 mm x 777.8 mm x 40.1 mm
(50.6 inch x 30.6 inch x 1.5 inch)
With stand
25.5 kg (56.2 lbs)
Without stand
21.4 kg (47.1 lbs)
ENG
ENGLISH
ENGLISH
ENG
Weight
26LV2500
(26LV2500-UA)
With stand
MODELS
Dimensions
(W x H x D)
22LV2500
(22LV2500-UA)
With stand
MODELS
Dimensions
(W x H x D)
19LV2500
(19LV2500-UA)
39
40
SPECIFICATIONS
WATCHING TV
Using additional options
Adjusting aspect ratio
SPECIFICATIONS
4:3: Resizes images to the previous standard
4:3.
Resize an image to view at its optimal size by
pressing RATIO while you are watching TV.
NOTE
You can also change the image size by
y
pressing Q. MENU or accessing Aspect
Ratio in the PICTURE menu.
The available ratio varies depending on the
y
input source.
Zoom: Formats an image to fit the screen
width. The top and bottom of the image may
not appear.
If you select Just Scan, you may see
y
image noises at the edge or edges of the
screen.
The input sources: DTV, Component,
y
HDMI-DTV, and DVI-DTV
(720p/1080i/1080p) support Just Scan.
Power requirement
AC100 - 240 V - 50/60 Hz
Television System
NTSC-M, ATSC, 64 & 256 QAM
Program Coverage
VHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV 1-135
External Antenna Impedance
75 Ί
Environment
condition
Operating
Temperature
0 - 40 °C
Operating Humidity
Less than 80 %
Storage Temperature
-20 - 60 °C
Storage Humidity
Less than 85 %
NOTE
If you access, Aspect Ratio in the Quick
menus,
Press < or > to stretch an image
y
vertically.
Press ^ or v to move the zoom focus up
y
or down.
NOTE
Product specifications may be changed without prior notice due to upgrade of product functions.
Cinema Zoom: Formats an image to the
cinemascope ratio, 2.35:1.
To change the ratio of the cinema zoom,
y
press < or > and its range is from 1 to 16.
To move the zoom focus up or down,
y
press ^ or v.
MODELS
Dimensions
(W x H x D)
Weight
NOTE
If you enlarge or reduce an image, the
y
image may be distorted.
42PW350
(42PW350-UE)
50PW350
(50PW350-UE)
42PW350U
(42PW350U-UC)
50PW350U
(50PW350U-UC)
42PW350R
(42PW350R-UA)
50PW350R
(50PW350R-UA)
991.8 mm x 667.0 mm x 230.5 mm 1176.1 mm x 774.7 mm x 289.8 mm
(46.3inch x 30.5 inch x 11.4 inch)
(39.0 inch x 26.2 inch x 9.0 inch)
Without stand
991.8 mm x 613.8 mm x 52.5 mm 1176.1 mm x 716.5 mm x 52.5 mm
(39.0 inch x 24.1 inch x 2.0 inch)
(46.3 inch x 28.2 inch x 2.0 inch)
With stand
21.5 kg (47.3 lbs)
29.6 kg (65.2 lbs)
Without stand
20.0 kg (44.0 lbs)
27.3 kg (60.1 lbs)
2.3 A / 230 W
3.0 A / 300 W
50PZ200
(50PZ200-UA)
60PZ200
(60PZ200-UA)
MODELS
Weight
50PW340
(50PW340-UB)
With stand
Current Value / Power consumption
Dimensions
(W x H x D)
Set By Program: Displays images in the same
aspect ratio as the original image.
42PW340
(42PW340-UB)
With stand
1171.9 mm x 770.9 mm x 289.8 mm 1390.8 mm x 905.2 mm x 334.7 mm
(46.1 inch x 30.3 inch x 11.4 inch)
(54.7 inch x 35.6 inch x 13.1 inch)
Without stand
1171.9 mm x 712.2 mm x 52.5 mm
(46.1 inch x 28.0 inch x 2.0 inch)
1390.8 mm x 835.5 mm x 52.5 mm
(54.7 inch x 32.8 inch x 2.0 inch)
With stand
29.8 kg (65.6 lbs)
42.6 kg (93.9 lbs)
Without stand
27.5 kg (60.6 lbs)
38.5 kg (84.8 lbs)
ENG
ENGLISH
Just Scan: Displays video images in the original
size without cutting off the edges.
ENGLISH
ENG
16:9: Resizes images to fit the screen width.
81
80
TROUBLESHOOTING
WATCHING TV
Changing AV modes
Video
Problem
Resolution
Each AV mode has optimized image and sound
settings.
Press AV MODE repeatedly to select an
appropriate mode.
An image displays in black and
white or the color quality is poor.
yAdjust the color setting in the Picture menu (See p.61).
yKeep a sufficient distance between this product and other electronic products.
yScroll to other channels. There may a problem with the broadcast.
Off
Horizontal or vertical bars appears
or images blur
yCheck if there are local interferences such as an electrical appliance or power
tool.
Cinema
Lines or streaks appear on images
yCheck the antenna or aim the antenna to the proper direction.
Sport
Afterimages (ghosts) appear when
the product turns off
yPixels may have been damaged from a fixed image displayed for a long time
(image burn). Use a screen saver to prevent the pixel damage on the screen.
Game
The power is on but the screen
appears extremely dark.
yAdjust the brightness and contrast in the Picture menu (See p.61).
Mode
Description
Changes to the previously customized
settings.
Uses the optimized image and sound
settings for a cinematic look.
Uses the optimized image and sound
settings for dynamic action sports.
Uses the optimized image and sound
settings for fast gaming.
When playing a video game using
PlayStation or Xbox. it is recommended
to use the Game mode.
When in Game mode, functions related
to picture quality will be optimized for
playing games.
“No Signal” appears on the screen. yCheck if the signal cable is connected between the TV and products properly.
yCheck the selected input source by pressing INPUT.
Black spots appear on the screen.
The display offset is wrong.
ySeveral pixels in red, green, white, or black may appear on the screen that can
attribute to the characteristics of the LCD panel.
yThis is normal.
Thin lines appear in the background
of the screen.
yCheck the video cable connections.
Horizontal noises appear or
characters blur.
yAdjust the Phase setting in the Picture menu.
See "SCREEN (RGB-PC)" on p.62.
The reception on some channels is
poor
yScroll to other channels. There may a problem with the broadcast.
yThe station signal may be weak. Aim the antenna to the proper direction.
yCheck if there are local interferences such as an electrical appliance or power
tool.
The disconnected input sources will be gray.
To add an input label, press the Blue button.
y
You can easily identify a device connected to
each input source.
If you connect a new external device to the
y
TV, a pop-up window appears. Select Yes on
the pop-up window to switch to that input
source.
If you select “SIMPLINK and On”, the popy
up window for the HDMI input will not
display.
Adding an Input label
Add a label to an input source so that you can
easily identify a device connected to each input
source.
,QSXW/DEHO
ᯜ
Using the input list
Selecting an input source
1 Press INPUT to access the input sources.
- The connected device displays on each input
source.
$9
‫܁‬
$9
‫܁‬
‫۽‬
&RPSRQHQW
‫܁‬
‫۽‬
&RPSRQHQW
‫܁‬
‫۽‬
5*%3&
‫܁‬
‫۽‬
9&5
‫۽‬
ᯝ
&ORVH
2 Press the Navigation buttons to scroll to one of
the input sources and press ENTER.
,QSXW/LVW
ᯒ0RYH
1 Press INPUT to access the input sources.
ᯙ(QWHU
2 Press the Navigation buttons to scroll to one of
the input sources.
79
86%
$9
$9
5*%3&
+'0,
+'0,
+'0,
&RPSRQHQW
&RPSRQHQW
3 Press the Blue button.
4 Press the Navigation buttons to scroll to one of
the input labels and press ENTER.
ᯕ,QSXW/DEHO
Input source
ᰙ([LW
Description
TV
Watch TV over the air, cable, and
digital cable broadcast.
USB
Play media files from a thumb drive.
AV
Watch video from a VCR or other
external devices.
Component
Watch video from a DVD or other
external devices, or through a digital
set-top box.
RGB-PC
Use the TV as a computer monitor.
HDMI
Watches video from a HTS or other
high definition devices.
5 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
ENG
ENGLISH
ENGLISH
ENG
yAdjust the position setting in the Picture menu (See p.61).
yCheck if the video card resolution and frequency are supported by the product.
If the frequency is out of range, set to the recommended resolution using the
display settings on the external device.
41
42
TROUBLESHOOTING
WATCHING TV
Locking the buttons on the TV
(Child Lock)
Using the quick menu
79
TROUBLESHOOTING
Customize frequently used menus.
Lock the buttons on the TV to prevent any
unwanted operations or accidents by children.
1 Press Q. MENU to access the quick menus.
1 Press Home to access the main menus.
2 Press the Navigation buttons to scroll through
the following menus.
2 Press the Navigation buttons to scroll to LOCK
General
Problem
yCheck the remote control sensor on the product and try again.
yCheck if there is any obstacle between the product and the remote control.
to ).
yCheck if the batteries are still working and properly installed ( to ,
yCheck if the appropriate input mode such as TV or VCR is set for using the
remote control.
No image display and no sound is
produced.
yCheck if the product is turned on.
yCheck if the power cord is connected to a wall outlet.
yCheck if there is a problem in the wall outlet by connecting other products.
Image appears slowly when the TV
turns on.
yThe image is muted during the product startup process. This is normal. If the
image does not appear in a few minutes, unplug the TV for 30 seconds and try
again. If the image still does not appear, contact the authorized service center
in your local area.
Cannot connect external devices.
ySee "Connection Overview" on p.72 and connect an external device.
The TV turns off suddenly.
yCheck the power control settings. The power supply may be interrupted.
yCheck if the Auto sleep feature is activated in the Time settings.
See "Sleep Timer" on p.66.
yIf there is no signal while the TV is on, the TV will turn off automatically after
15 minutes of inactivity.
‫܁‬$VSHFW5DWLR‫۽‬
and press ENTER.
3 Input password.
4 Press the Navigation buttons to scroll to
Key Lock and press ENTER.
5 Select On to activate the Key lock feature.
- To deactivate the Key lock feature, select Off.
ᯙ
6 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
NOTE
Menu
Aspect Ratio
Depending on model
NOTE
The available menus and options may
y
differ from the input source that you are
using.
3 Press the Navigation buttons to scroll to the
option you want.
4 When you are finished, press Q. MENU.
ENG
ENGLISH
ENGLISH
ENG
The TV is programmed to remember the last
y
setting after you turn the TV off.
If you turn the TV off with the Key lock
y
feature activated, , INPUT, CH (^, v) or
Number buttons on the remote control.
If you press any button on the TV with the
y
Key lock feature activated,
Key Lock
appears on the screen.
Description
Changes the image size (16:9,
Just Scan, Set By Program, 4:3,
Zoom, Cinema Zoom).
Picture Mode Changes the image mode
(Intelligent sensor1, Vivid,
Standard, APS1, Cinema, Sport,
Game, Expert1, Expert2).
Sound Mode Changes the sound mode
(Standard, Music, Cinema, Sport,
Game).
Multi Audio
Changes the audio language
(Digital signal).
SAP
Changes the MTS sound (Analog
signal).
Sleep Timer Sets the length of time until the
TV to turns off.
Del/Add
Edits the channels to add or delete
the channel.
Caption
Activates or deactivate the
subtitles.
USB Device Ejects a USB device when a USB
device is connected.
Resolution
Cannot control the TV with the
remote control.
Audio
Problem
Resolution
No sound is produced while images yPress VOL + or - button.
are displaying.
yCheck if the sound is muted by pressing MUTE.
yScroll to other channels. There may a problem with the broadcast.
yCheck if the audio cables are connected properly.
One of the speakers produce noises yA change in ambient humidity or temperature may result in an unusual noise
or does not produce sound.
when the product turns on or off.
yThere is no problem with your product.
78
MAINTENANCE
MAINTENANCE
Update and clean your TV regularly to keep the
best performance and to extend the product
lifespan.
Cleaning Your TV
CAUTION
Make sure to turn the power off and
y
disconnect the power cord and all other
cables first.
When the TV is left unattended and unused
y
for a long time, disconnect the power cord
from the wall outlet to prevent possible
damage from lightning or power surges.
WATCHING TV
CAUTION
Do not spray liquid onto the surface. If water
y
enters the TV, it may result in fire, electric
shock, or malfunction.
Do not use any chemicals as this may
y
deteriorate the surface.
Power cord
Remove the accumulated dust or dirt on the
power cord regularly.
Preventing “Image burn” or
“Burn-in” on your TV screen
Do not push, rub, or hit the surface with
y
your fingernail or a sharp object, as this may
result in scratches on the screen and image
distortions.
Do not use any chemicals, such as waxes,
y
benzene, alcohol, thinners, insecticides,
air fresheners, lubricants, as these may as
these may damage the screen’s finish and
cause discolorations.
Cabinet and stand
To remove dust or light dirt, wipe the cabinet with
a dry, clean, and soft cloth.
To remove major dirt, wipe the cabinet with a
soft cloth dampened in a clean water or water
containing a small amount of mild detergent. Then
wipe immediately with a dry cloth.
Testing the Picture / Sound
To execute picture and sound tests.
1 Press Home to access the main menus.
2 Press the Red button to access Customer
Support.
3 Press the Navigation buttons to scroll Picture
Test or Sound Test and press ENTER.
4 If you have any problem, press the Navigation
buttons to scroll to Yes and press ENTER.
5 When you are finished, press EXIT.
Using the product or service
information
If a fixed image displays on the TV screen for
y
a long period of time, it will be imprinted and
become a permanent disfigurement on the
screen. This is “image burn” or “burn-in” and
not covered by the warranty.
If the aspect ratio of the TV is set to 4:3 for a
y
long period of time, image burn may occur on
the letterboxed area of the screen.
Avoid displaying a fixed image on the TV screen
y
for a long period of time (2 or more hours for
LCD, 1 or more hours for the Plasma TV) to
prevent image burn.
To check the product or service information
1 Press Home to access the main menus.
2 Press the Red button to access Customer
Support and press ENTER.
3 Press the Navigation buttons to scroll Product/
Service Info..
You can check the various product/Service
infomation based on your model.
4 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
ENG
ENGLISH
ENGLISH
ENG
CAUTION
Using the customer support
When you return to the previous menu, press
BACK.
Screen and frame
To remove dust or light dirt, wipe the surface with
a dry, clean, and soft cloth.
To remove major dirt, wipe the surface with a
soft cloth dampened in clean water or a diluted
mild detergent. Then wipe immediately with a dry
cloth.
43
44
MAKING CONNECTIONS
3D IMAGING
3D IMAGING (FOR 3D
TV)
3D Technology
This TV can display in 3D via 3D broadcasting or
when the TV is connected to a compatible device,
such as a Blu-ray 3D Player. The viewer must
wear compatible 3D glasses in order to see these
images in 3D format.
WARNING
please consult with your doctor before
watching 3D TV.
Also certain symptoms can occur in
unspecified conditions without any previous
history. If you experience any of the following
symptoms, immediately stop watching the
3D imaging and consult a doctor: dizziness or
lightheadedness, visual transition or altered
vision, visual or facial instability, such as eye
or muscle twitching, unconscious action,
convulsion, loss of conscience, confusion
or disorientation, loss of directional sense,
cramps, or nausea. Parents should monitor
their children, including teenagers, for these
symptoms as they may be more sensitive to
the effects of watching 3D TV.
Risk of photosensitization seizure can be
y
reduced with the following actions.
Âť Take frequent breaks from watching 3D
TV.
Âť For those who have vision that is different
in each eye, they should watch the TV
after taking vision correction measures.
Âť Watch the TV so that your eyes are on the
same level as the 3D screen and refrain
from sitting too closely to the TV.
Âť Do not watch the 3D imaging when tired
or sick, and avoid watching the 3D imaging
for a long period of time.
Âť Do not wear the 3D glasses for any other
purpose than viewing 3D imaging on a 3D
TV.
Âť Some viewers may feel disoriented after
watching 3D TV. Therefore, after you
watch 3D TV, take a moment to regain
awareness of your situation before moving.
Description
Displays the previously viewed TV channel.
Plays discs. When multiple discs are
available, the title of the disc appears at the
bottom of the screen.
Controls the connected VCR.
HDD recordings playback: Controls the
recording stored in HDD.
Audio out to home theater speaker or Audio
out to TV: Changes the audio output between
Home theater speaker and TV speaker.
- A check mark appears in front of the selected
device.
- Available devices display in a bright color.
- Unavailable devices display in grey.
4 Control the selected AV device.
- Direct Play: After connecting AV devices to
the TV, you can directly control the devices
and play media without additional settings.
- Select AV device: Enables you to select one
of the AV devices connected to the TV.
- Disc playback: Control connected AV devices
by pressing the Navigation buttons, ENTER,
á°Ś, á°§, á°¨, á°Ş and á°Š.
- Power off all devices: When you power off
the TV, all connected devices are turned off.
- Switch audio-out: Offers an easy way to
switch audio-out.
- Sync Power on: When the equipment with
SIMPLINK function connected HDMI terminal
starts to play, The TV will automatically turn
on.
NOTE
If you change the input source by pressing
y
INPUT, the progressing function of the
SIMPLINK device will stop.
If you select a device that has the
y
home theater feature, the sound output
automatically switches to the home theater
speaker and the TV speaker turns off.
If a connected SIMPLINK home theater
y
system does not play the audio from the TV,
connect the DIGITAL AUDIO OUT terminal
on the rear of the TV to the DIGITAL AUDIO
IN terminal on the back of the SIMPLINK
device with an optical cable.
ENG
ENGLISH
ENGLISH
ENG
When viewing 3D imaging, watch the TV
y
from an effective viewing angle and within
the appropriate distance. The appropriate
angle and distance are provided in this
manual. If you exceed this viewing angle or
distance, you may not be able to view the
3D imaging. Furthermore, the 3D imaging
may not display if it is viewed while you are
lying down (For LED LCD TV).
If you watch the 3D imaging too closely or
y
for a long period of time, it may harm your
eyesight.
Watching the TV or playing video games
y
that incorporate 3D imaging with the 3D
glasses for a long period of time can cause
drowsiness, headaches or fatigue to you
and/or your eyes. If you have a headache,
or otherwise feel fatigued or drowsy, stop
watching the TV and take a rest.
Pregnant woman, seniors, persons with
y
heart problems or persons who experience
frequent drowsiness should refrain from
watching 3D TV.
Some 3D imaging may cause you to duck
y
or dodge the image displayed in the video.
Therefore, it is best if you do not watch 3D
TV near fragile objects or near any objects
that can be knocked over easily.
Please prevent children under the age of
y
5 from watching 3D TV. It may affect their
vision development.
Warning for photosensitization seizure:
y
Some viewers may experience a seizure or
epilepsy when exposed to certain factors,
including flashing lights or images in TV or
video games. If you or anybody from your
family has a history of epilepsy or seizure,
No.
77
76
MAKING CONNECTIONS
3D IMAGING
SIMPLINK Connection
Connect a USB storage device such as s USB
flash memory, external hard drive, MP3 player or a
USB memory card reader to the TV and access the
My media menu to use various multimedia files.
See "Connecting USB storage devices" on p.48 and
see "Browsing files" on p.76.
Use the TV remote control to play and control the
AV device connected with the HDMI cable through
HDMI-CEC. Your TV only works with the devices
that support HDMI-CEC.
IN 3 USB IN
Connecting to a USB
or
Connecting to a Headphone
( )
LCD
Listen to the sound through a headphone.
Connect one end of the HDMI cable to the HDMI/
DVI IN or HDMI IN terminal on the rear of the TV
and the other end to the SIMPLINK device.
NOTE
If the connected device does not support
y
HDMI-CEC, the SIMPLINK feature is
unavailable.
To operate SIMPLINK, you should use
y
an High Speed HDMI cable with the CEC
(Consumer Electronics Control) function.
Activating and Using the
SIMPLINK menus
IN 3
AV IN 2
H/P
2 Press the Navigation buttons to scroll to On.
VIDEO / AUDIO
ANTENNA /
CABLE IN
menus.
3 Press the Navigation buttons to scroll to one of
the devices and press ENTER.
ᯙ(QWHUᰙ([LW
NOTE
AUDIO menu options are disabled when
y
connecting a headphone.
When changing AV MODE with a headphone
y
connected, the change is applied to video
but not to audio.
Optical Digital Audio Out is not available
y
when connecting a headphone.
Headphone impedance: 16 :
y
Max audio output: 10 mW to 15 mW
y
Headphone jack size: 0.32 cm (1/8 inch)
y
‫܁‬2Q‫۽‬
',6&
‫۽܁‬
+'''9'5
9&5
‫۽܁‬
+'+7
:DWFK79
+''5HFRUGHU
6SHDNHU
‫۽܁‬
796SHDNHU
When using 3D Glasses
CAUTION
3D glasses are sold separately. Refer to the
y
3D glasses manual for operating instructions.
Do not use the 3D glasses to replace your
y
corrective glasses, sunglasses or protective
goggles.
Do not store the 3D glasses in hot or cold
y
locations.
Do not drop objects onto the 3D glasses. Do
y
not drop or bend the glasses.
Since the lenses of the 3D glasses are
y
easily scratched, make sure to clean only
with a soft cloth. Shake off any dust before
using the cloth since the glasses are easily
scratched.
3D Imaging Viewing Range
TV size, viewing angle & other circumstances
may change the viewing distance and the angle of
view.
Viewing Distance
Viewing Angle
2 m - 10 m
(6.5 ft - 32.8 ft)
120 ° (When the viewing
distance is 2 m (6.5 ft))
TV
2m
60 °
60 °
10 m
2m
ENG
ENGLISH
ENGLISH
ENG
1 Press SIMPINK to access the SIMPLINK
NT IN
NOTE
To watch the TV in 3D, you must put on your
y
3D glasses. For best results, you should
wear LG Brand 3D glasses. The 3D imaging
may not display properly when using another
brand of 3D glasses. Please see the 3D
glasses manual for instructions on how to
use the 3D glasses.
After powering on the TV, a few seconds
y
may be needed for your TV to calibrate.
It may take a moment for you to see the
y
3D imaging if you look away from the TV
and then revert your eyes back to the 3D
program.
The TV may flicker slightly if the 3D imaging
y
is displayed under 3 wavelength fluorescent
light (50 Hz - 60 Hz) or magnetic fluorescent
lamp (50Hz - 60 Hz). In such instances, it is
recommended to turn the lights off.
If there is an obstacle between the TV and
y
the 3D glasses, the 3D imaging may not
display properly.
Do not use the TV in close proximity to other
y
electronic and RF equipments.
In Analog TV, 3D Imaging does not work.
y
When watching 2D images, it is
y
recommended to take off the 3D glasses. If
you watch 2D images with the 3D glasses
on, you may see distorted images.
45
MAKING CONNECTIONS
3D IMAGING
2 Use the following options while viewing 3D
imaging.
3 Press the Navigation buttons to scroll the 3D
video or 2D video and press ENTER.
4 Press the Navigation buttons to select the
shape and press ENTER.
Mode
Description
Changed from 2D imaging to
3D imaging.
2D Âť 3D
'6HWWLQJ
'3LFWXUH6L]H ‫܁‬
-XVW6FDQ
‫۽‬
''HSWK ‫܁‬
‫۽‬
'9LHZSRLQW
‫܁‬
‫۽‬
'3LFWXUH%DODQFH
‫܁‬
2II
‫۽‬
'3LFWXUH&RUUHFWLRQ
‫܁‬
/HIW5LJKW
‫۽‬
OPTICAL
DIGITAL
AUDIO OUT
/DVI IN
L/MONO
AUDIO R
AUDIO IN
(RGB/DVI)
RGB IN (PC)
Digital optical audio connection
REMOTE
CONTROL IN
PR L
PB
3D Depth
Adjusts the distance between the
object and the background in the
picture to enhance the 3D effect in
2D to 3D mode.
3D Viewpoint
PR L
PB
AUDIO
VIDEO
(CONTROL & SERVICE)
ANTENNA
/CABLE
IN
COMPONENT IN
OPTICAL
DIGITAL
AUDIO OUT
(RGB/DVI)
AUDIO IN
AV IN 1
RGB IN
(PC)
IN(PC)
ANTENNA /
CABLE IN
OPTICAL AUDIO IN
/ DVI IN
AUDIO
RS-232C IN(CONTROL & SERVICE)
Changes the order of images in the
right and left sides of the picture in
3D mode.
RS-232C IN
PR
3D Picture
Correction
AUDIO R
REMOTE
CONTROL IN
PB
Adjusts the color and brightness
difference between the right and left
sides of the picture in 3D mode.
L/MONO
AUDIO IN
(RGB/DVI)
RGB IN (PC)
Power on your 3D glasses and put them on.
AV IN 1
VIDEO
Brings the picture (including both the
object and background images) to
the front or back to enhance the 3D
effect in 3D mode.
3D Picture
Balance
OPTICAL
DIGITAL
AUDIO OUT
/DVI IN
L/MONO AUDIO R
and press ENTER.
LV3500 series
VIDEO
6 Press the Navigation buttons to scroll to Enter
PW350 series
VIDEO
5 Wear the 3D glasses.
RGB OUT (PC) AUDIO OUT
USB IN
OPTICAL
PTICAL
TICAL DIGITAL
DIGIT ANTENNA
ANTENNA/
AUDIO OUT
CABLE IN
Sit 2 meters from TV to enjoy the best 3D
LV3500 series
view.
&DQFHO
USB IN
(QWHU
RGB OUT (PC) AUDIO OUT
ᯕ'6HWWLQJ
7 Press the 3D button to Turn off 3D mode or
COMPONENT IN
H/P
AUDIO
(QWHU
ANTENNA /
CABLE IN
&DQFHO
PR
'YLGHR
(QWHU
L/MONO AUDIO R
'PRGH
RS-232C IN(CONTROL & SERVICE)
/ DVI IN
VIDEO
Turn off 2D Mode.
PB
AV IN 1
RGB IN(PC)
Turn off 3D Mode.
&DQFHO
ᯕ'6HWWLQJ
OPTICAL AUDIO IN
AV IN 2
(RGB/DVI)
AUDIO IN
IN 3
OPTICAL
DIGITAL
AUDIO OUT
VIDEO
Turn off 2D mode.
VIDEO / AUDIO
ENGLISH
ENG
Frame
Sequential
Transmits the digital audio signal from the TV to an
external device. Connect the external device and
the TV with the optical audio cable as shown in
the following illustration.
ENG
ENGLISH
Cuts off the outer edges of the
picture and stretch it to fit the full
screen in 3D mode.
Checker Board
ANTENNA
/CABLE
IN
Description
3D Picture Size
Top & Bottom
AUDIO
VIDEO
(CONTROL & SERVICE)
IN 3
Button
RS-232C IN
(QG'YLGHR
H/P
Side by Side
NOTE
AV IN 1
VIDEO
(QWHU
Use an optional external audio system instead of
the built-in speaker.
If you use an optional external audio device
y
instead of the built-in speaker, set the TV
speaker feature to off (See p.65).
PW350 series
AV IN 2
2 Press 3D.
Transmits the analog video signal from your PC
to the TV. Connect the PC and the TV with the
supplied D-sub 15 pin signal cable as shown in the
following illustrations. To transmit an audio signal,
connect an optional audio cable.
75
Connecting to an Audio
System
VIDEO / AUDIO
1 Play the video produced in 3D.
RGB Connection
Press 3D SETTING.
COMPONENT IN
Using 3D quick menu option
Viewing 3D Imaging
COMPONENT IN
46
74
MAKING CONNECTIONS
3D IMAGING
Component Connection
Composite Connection
CAUTION
Transmits the analog video and audio signals from
an external device to the TV. Connect the external
device and the TV with the component cable as
shown in the following illustration.
Transmits the analog video and audio signals from
an external device to the TV. Connect the external
device and the TV with the composite cable as
shown in the following illustration.
PW350 series
PW350 series
OPTICAL
DIGITAL
AUDIO OUT
/DVI IN
OPTICAL
DIGITAL
AUDIO OUT
/DVI IN
AV IN 1
VIDEO
AV IN 1
L/MONO
AUDIO R
VIDEO
L/MONO
AUDIO IN
(RGB/DVI)
RGB IN (PC)
AUDIO R
AUDIO IN
(RGB/DVI)
RGB IN (PC)
PR L
PB
RS-232C IN
AUDIO
VIDEO
(CONTROL & SERVICE)
REMOTE
CONTROL IN
ANTENNA
/CABLE
IN
PR L
PB
RS-232C IN
AUDIO
VIDEO
(CONTROL & SERVICE)
COMPONENT IN
COMPONENT IN
REMOTE
CONTROL IN
47
ANTENNA
/CABLE
IN
Some menus may not work while watching
y
the TV in 3D.
The 3D imaging mode is disabled
y
automatically when switching DTV channels.
The screen may not be displayed properly
y
if you view 2D DTV images in 3D imaging
mode.
3D effect can be seen when 3D Mode is
y
selected appropriately for the 3D input signal
supplied to the TV.
For *mpo files (3D camera files), the 3D
y
imaging mode is enabled automatically.
NOTE
Energy Saving is disabled while playing in
y
3D.
VIDEO L (MONO) AUDIO R
VIDEO
AUDIO
LV3500 series
USB IN
COMPONENT IN
IN 3
H/P
OPTICAL
PTICAL
TICAL DIGITAL
DIGIT ANTENNA
ANTENNA/
AUDIO OUT
CABLE IN
LAN
R AUDIO L(MONO)
(For only LV3500 series)
USB IN
AUDIO
NOTE
COMPONENT IN
PR
ANTENNA /
CABLE IN
AUDIO
L/MONO AUDIO R
L(MONO)
VIDEO
RGB IN(PC)
RS-232C IN(CONTROL & SERVICE)
/ DVI IN
PB
AV IN 1
H/P
(RGB/DVI)
AUDIO IN
IN 3
OPTICAL
DIGITAL
AUDIO OUT
VIDEO
If cables are installed incorrectly, it could
y
case the image to display in black and white
or with distorted color. Check to ensure the
cable are matched with the corresponding
color connection.
AV IN 2
VIDEO
VIDEO
VIDEO / AUDIO
AV IN 2
H/P
AV IN 2
VIDEO / AUDIO
PR
LAN
OPTICAL
PTICAL
TICAL DIGITAL
DIGIT ANTENNA
ANTENNA/
AUDIO OUT
CABLE IN
LAN
ANTENNA /
CABLE IN
PB
/ DVI IN
AUDIO
RS-232C IN(CONTROL & SERVICE)
VIDEO / AUDIO
IN 3
AV IN 1
RGB IN(PC)
L/MONO AUDIO R
L(MONO)
AUDIO
(RGB/DVI)
AUDIO IN
VIDEO
OPTICAL
DIGITAL
AUDIO OUT
VIDEO
ANTENNA /
CABLE IN
PR
VIDEO L/MONO AUDIO R
RGB IN(PC)
RS-232C IN(CONTROL & SERVICE)
PB
AV IN 1
/ DVI IN
COMPONENT IN
(RGB/DVI)
AUDIO IN
VIDEO
OPTICAL
DIGITAL
AUDIO OUT
ENG
ENGLISH
ENGLISH
ENG
USB IN
LV3500 series
VIDEO L (MONO) AUDIO R
MAKING CONNECTIONS
ENTERTAINMENT
AV IN 1
VIDEO
L/MONO
Transmits the digital video and audio signals from
an external device to the TV. Connect the external
device and the TV with the HDMI cable as shown
in the following illustration.
AUDIO R
AUDIO IN
(RGB/DVI)
RGB IN (PC)
PR L
PB
RS-232C IN
AUDIO
VIDEO
(CONTROL & SERVICE)
COMPONENT IN
REMOTE
CONTROL IN
ANTENNA
/CABLE
IN
NOTE
AUDIO OUT
DVI OUT
LV3500 series
USB IN
Use a High Speed HDMI™ Cable
y
(v.1.3, HDMI™ CEC Support).
Use the latest High Speed HDMI™ Cable
y
with CEC (Customer Electronics Control)
function.
PW350 series
OPTICAL
DIGITAL
AUDIO OUT
/DVI IN
AV IN 1
COMPONENT IN
AUDIO R
OPTICAL
DIGITAL
AUDIO OUT
(RGB/DVI)
AUDIO IN
AV IN 1
PR L
PB
RS-232C IN(CONTROL & SERVICE)
LAN
ANTENNA /
CABLE IN
/ DVI IN
AUDIO
AUDIO
VIDEO
RS-232C IN
(CONTROL & SERVICE)
RGB IN(PC)
ANTENNA
/CABLE
IN
L/MONO AUDIO R
PR
REMOTE
CONTROL IN
PB
IN 3
L/MONO
AUDIO IN
(RGB/DVI)
RGB IN (PC)
H/P
VIDEO
VIDEO
CAUTION
Do not turn the TV off or remove a USB
y
storage device while the USB storage device
is connected to the TV, as this could result
in loss of files or damage to the USB storage
device.
Back up your files saved on a USB storage
y
device frequently, as you may lose or
damage the files and this may be not
covered by the warranty.
OPTICAL
DIGITAL
AUDIO OUT
/DVI IN
VIDEO
Disconnect the USB storage device only when
the message says that it is safe to remove.
PW350 series
AV IN 2
Device and press ENTER.
Transmits the digital video signal from an external
device to the TV. Connect the external device and
the TV with the DVI-HDMI cable as shown in the
following illustration. To transmit an audio signal,
connect an optional audio cable.
OPTICAL
PTICAL
TICAL DIGITAL
DIGIT
AUDIO OUT
HDMI
AUDIO OUT
LV3500 series
DVI OUT
COMPONENT IN
(RGB/DVI)
AUDIO IN
PR
ANTENNA /
CABLE IN
AUDIO
L/MONO AUDIO R
LAN
VIDEO
RS-232C IN(CONTROL & SERVICE)
/ DVI IN
PB
AV IN 1
RGB IN(PC)
VIDEO
OPTICAL
DIGITAL
AUDIO OUT
OPTICAL
PTICAL
TICAL DIGITAL
DIGIT ANTENNA
ANTENNA/
AUDIO OUT
CABLE IN
HDMI
VIDEO / AUDIO
2 Press the Navigation buttons to scroll to USB
DVI to HDMI Connection
HDMI Connection
USB IN
1 Press Q.MENU to access the quick menus.
Connect a HD receiver, DVD, or VCR player to the
TV and select an appropriate input mode.
73
ENG
ENGLISH
ENGLISH
ENG
To disconnect a USB storage device,
make sure to end the connection properly to
prevent damages to the TV or files.
Connecting to a HD receiver,
DVD, or VCR player
IN 3
or
This part of MAKING CONNECTIONS mainly
y
uses picture for PW350, LV3500 series.
H/P
IN 3 USB IN
Connect USB storage devices such as a USB flash
drive, external hard drive, or MP3 player to the TV
and use multimedia features (See "Browsing files"
on p. 49).
Connect a USB flash drive or USB memory
card reader to the TV as shown in the following
illustration.
The TV recognizes only a USB storage
y
device.
If you connect a USB storage device to the
y
TV through a USB hub, your TV may not
recognize the USB storage device.
The TV may not recognize a USB storage
y
device that requires a special driver.
The recognition speed of a USB storage
y
device may differ depending on the device.
Only use a USB storage device which has
y
normal music or image files.
Use only USB storage devices that are
y
formatted as a FAT 32 or NTFS file system.
If you format a USB storage device as a
y
NTFS file system, you cannot delete the
saved files.
You may need to connect a USB storage
y
device to an external power supply with a
power adapter.
If the TV does not recognize a connected
y
USB storage device, replace the cable and
try again. Do not use an excessively long
cable.
The TV does not support some USB storage
y
devices properly.
You can use a multi-partition (up to 4) USB
y
storage device.
You can use up to 4 USB storage devices at
y
a time by using a USB multi-card reader.
The file alignment method of a USB storage
y
device is similar to the one of Window XP.
You cannot create or delete a folder saved in
y
a USB storage device directly on the TV.
The number of characters for a file name is
y
up to 100 English characters.
If there are too many folders and files in one
y
folder, it may not operate properly.
The recommended capacity for a USB
y
external hard disk is 1 TB or less and for a
USB storage device is 32 GB or less.
If a USB external hard disk with the Energy
y
Saving feature does not work, turn the USB
external hard disk off and on again to make
it work properly. For more information, refer
to the user manual of the USB external hard
disk.
USB storage devices below USB 2.0 are
y
supported as well. But they may not work
properly in the movie list.
AV IN 2
Connecting USB storage devices
Tips for using USB storage devices
VIDEO / AUDIO
ENTERTAINMENT
COMPONENT IN
48
72
MAKING CONNECTIONS
ENTERTAINMENT
Browsing files
Connection Overview
Connect various external devices to the ports on the TV back panel.
1 Find an external device you want to connect to your TV as shown on the following illustration.
2 Check the connection type of the external device.
86%;7,&.
1 Connect a USB storage device.
DVD
3 Press the Navigation buttons to scroll to MY
VCR
%PS

ᯕ&KDQJH1XPEHUV
ᯕ0DUN0RGH
á°ż([LW
4 Press Navigation buttons to scroll to MOVIE
No.
0<0(',$
0RYLH/LVW
3KRWR/LVW
0XVLF/LVW
5 Select Drive1 to access the connected USB
storage device.
Moves to the previous folder.
Current page number/total number of
pages
Current page number/total number of
pages
Contents under the folder focused on 1
Button
Press the Navigation buttons toSelect a folder/
file you want.
Description
Available buttons on the remote control
Description
Green
button
Moves to Photo List, Music List, or
Movie List.
Yellow
button
Change Numbers: Changes the number
or thumbnails displayed at a time.
Blue
button
Allows you to mark certain files.
3DJH
0RYLH/LVW
'ULYH
86%;7,&.
0
0
3DJH
0
0
%XWWHUIO\B

0
Tips for using USB storage devices
Type
Supported File Formats
Video yMPG, MPEG, DAT, TS, TRP, TP, VOD, MP4,
ᯒ0RYHᯙ3OD\᱇3DJH&KDQJH᱅0DUN
ᯕ7R3KRWR/LVW
PC
Camcorder/Camera
ᯕ&KDQJH1XPEHUV
ᯕ0DUN0RGH
Gaming device
á°ż([LW
3DJH
3KRWR/LVW
86%;7,&.
HDMI – See p.73
DVI – See p.73
Component – See p.74
Composite – See p.74
Digital – See p.75
RGB – See p.75
Memory storage – See p.76
Memory card reader – See p.76
NOTE
If you connect a gaming device to the TV, use the cable supplied with the gaming device.
y
Refer to the external equipment’s manual for operating instructions.
y
3DJH
'ULYH
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
ᯒ0RYHᯙ9LHZ᱇3DJH&KDQJH᱅0DUN
ᯕ7R0XVLF/LVW
ᯕ&KDQJH1XPEHUV
ᯕ0DUN0RGH
á°ż([LW
MOV, MKV, DivX, AVI, Motion JPEG (AVI,
MP4, MKV), ASF, WMV, FLV
yResolution:
under 1920 pixel (width) x 1080 pixel (height)
yFrame Rate:
under 30 frame/sec (1920 x 1080), under 60
frame/sec (1280 x 720)
yMax bitrate of playable movie file: 20 Mbps
(Mega bit per second)
yBit rate of audio format: within 32 kbps to
320 kbps (MP3)
ySupported subtitle format: *.smi, *.srt, *.sub
(MicroDVD, SubViewer 1.0/2.0), *.ass, *ssa,
*txt (TMPlayer), *.psb (PowerDivX)
ENG
ENGLISH
ENGLISH
ENG
USB
3DJH
%PS

ᯒ0RYHᯙ3OD\᱇3DJH&KDQJH᱅0DUN
ᯕ7R0RYLH/LVW
LIST, PHOTO LIST, or MUSIC LIST and press
ENTER.
Speaker
%PS

%PS

MEDIA and press ENTER.
HD Receiver
'ULYH
%PS

2 Press Home to access the main menus.
3 Go to the appropriate illustration and check the connection details.
3DJH
0XVLF/LVW
Access the photo, music, or movie lists and
browse files.
49
50
ENTERTAINMENT
Type
MAKING CONNECTIONS
Supported File Formats
Photo yJPG
yAvailable size
Baseline: 64 pixel (W) x 64 pixel (H) - 15360
pixel (W) x 8640 pixel (H)
Progressive: 64 pixel (W) x 64 pixel (H) 1920 pixel (W) x 1440 pixel (H)
* Do not use the progressive option when
saving JPG files on your PC.
yIt may take some time to open highresolution images in full screen.
For 3D TV
File
Item
Extensions
2D jpeg
jpg
jpe
Profile
Supproted ySOF0:
file format
baseline
ySOF1: Extend
Sequential
ySOF2:
Progressive
Photo size yMin: 64 x 64
yMax - Normal
Type: 15360
(W) x 8640 (H)
yProgressive
Type: 1920
(W) x 1440 (H)
Supproted ympo
file format
Photo size y4:3 size: 3,648
x 2,736
2,592 x 1,944
2,048 x 1,536
y3:2 size: 3,648
x 2,432
Music yMP3
yBit rate range 32 Kbps - 320 Kbps
ySampling rate (Sampling Frequency)
MPEG1 layer 3: 32 kHz, 44.1 kHz,
48 kHz
MPEG2 layer 3: 16 kHz, 22.05 kHz,
24 kHz
MPEG2.5 layer 3: 8 kHz, 11.025 kHz,
12 kHz
* A copy-protected file will not play.
MAKING CONNECTIONS
Connect various external devices to the TV and switch input modes to select an external device. For more
information of external device’s connection, refer to the manual provided with each device.
Available external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC,
camcorders or cameras, gaming devices, and other external devices.
NOTE
If you record a TV program on a DVD recorder or VCR, make sure to connect the TV signal input cable
y
to the TV through a DVD recorder or VCR. For more information of recording, refer to the manual
provided with the connected device.
The external device connection may differ from the model.
y
Connect external devices to the TV regardless of the order of the TV port.
y
Connect external devices to the TV by referring to the following table.
Connection type
Video
Audio
Digital
Analog
Digital
HDMI (highly recommended)
Analog
DVI
Component
Composite
RGB
Optical audio
ENG
ENGLISH
ENGLISH
ENG
3D mpo
71
70
CUSTOMIZING SETTINGS
ENTERTAINMENT
Setting
ISM Method
Plasma
Description
Prevents image sticking or removes a ghost image.
A frozen still picture displayed on the screen for prolonged periods can result in a ghost image.
Viewing Videos
NOTE
Your TV can display video files from a USB storage
device.
Mode
Normal
Sets it if image sticking is never a problem.
Orbiter
Avoids a ghost image on the screen.
The image will move every 2 minutes to help prevent ghost images.
However, it is best not to allow any fixed image to remain on the screen.
Color Wash
White Wash
Removes a ghost image on the screen.
The color block with the screen moved a little and the white pattern are
alternately displayed. It is difficult to see the after image on all colors.
Once it has been corrected it will not be visible in any color.
Removes a ghost image on the screen.
Use sparingly. Watch the TV normally for a while before using this
feature to see if the ghost image disappears on its own.
51
1 Press Home to access the main menus.
2 Press the Navigation buttons to scroll to MY
MEDIA and press ENTER.
: Abnormal files are displayed using this
y
graphic.
y : Non-supported files are displayed using
this graphic.
7 Control playback by using the following
buttons.
3 Press the Navigation buttons to scroll to Movie
List and press ENTER.
4 Select Drive1 to access the connected USB
storage device.
5 Press the Navigation buttons to scroll to a
NOTE
yAn excessive ghosted image may be impossible to clear entirely
with White Wash. To return to normal viewing, press the any
button.
folder/file you want and press ENTER.
6 Play a movie by using the following menus/
buttons.
ᯚᯛ
á°Ś
á°§
á°Ś
á°¨

á°Ş
á°Š
ᰚ
áą­2SWLRQ
ᰙ+LGH
á°ż([LW
3DJH
Initial Setting
Resets the TV to factory default and erases all stored channels.
Customizes the TV settings to suit your preference. The initial setup screen will appear when you
turn on the TV for the first time.
When selecting Yes, the TV turns off automatically and starts factory reset.
0RYLH/LVW
'ULYH
86%;7,&.
0
3DJH
0
0
0
ENGLISH
ENG
yWhen selecting “Lock System - On”in the LOCK menu, the message to enter the password
appears.
yIf you forget your password, press “0-3-2-5” on the remote control.
ᯒ0RYHᯙ3OD\᱇3DJH&KDQJH᱅0DUN
ᯕ7R3KRWR/LVW
ᯕ&KDQJH1XPEHUV
ᯕ0DUN0RGH
á°Ś
Plays a video.
á°¨
Pauses or resumes the playback.
á°Ş
Scans backward in a file.
á°Š
Scans forward in a file.
á°¨ and á°Š
á°ż([LW
3DJH
0RYLH/LVW
Setting
0DUN0RGH
'ULYH
86%;7,&.
Language
Selects a desired language.
Mode Setting
Selects Home Use for the home environment.
Selects Store Demo for the retail environment.
Selects Demo Mode to set to show special features of the TV. You can
cancel the demo mode by pressing any buttons except the Volume and
Mute buttons.
3DJH
< or >
0
0
0
0
%XWWHUIO\B

0
ᯒ0RYHᯙ0DUN᱇3DJH&KDQJH᱅0DUN
ᯕ3OD\0DUNHG
ᯕ0DUN$OO
ᯕ8QPDUN$OO
ᯕ([LW0DUN0RGH
á°ż([LW
Power Indicator
(LED LCD TV)
Turns the power indicator light on or off.
Time Zone
Sets the time zone and daylight saving.
Auto Tuning
Scans and saves available channels automatically.
Button
Description
Navigation
button
Scrolls through the files.
ENTER
Plays the highlighted file or enters
the mark mode.
CH (^, v)
Moves to the previous or next
page.
Enters the mark mode.
Set ID
Adds an ID to the connected devices.
MARK
Mode Setting
Default selection is “Home Use”. We recommend setting the TV to “Home Use” mode for the best
picture in your home environment.
Play Marked
Plays the selected video.
Option
Menu
Description
Mark All
Selects all files.
Home Use
Selects it for the home environment.
Unmark All
Clears all of your selections.
Store Demo
Selects it for the retail environment.
Exit Mark
Mode
Exit the Mark Mode.
Demo Mode
Sets to show special features of the TV. You can cancel the demo mode
by pressing any buttons except the Volume and Mute buttons.
Plays videos in slow motion.
Skips to specific points in a file
during playback. The time of a
specific point will appear on the
status bar. In some files, this
function may not work properly.
ENERGY
SAVING
Increases or deceases the
brightness of your screen.
Q.MENU
Shows the Option menu (See p.52).
AV MODE
Selects the desired source.
NOTE
yWhen selecting Store Demo, Demo Mode will be activated.
Description
Stops the playback.
BACK
Hides the menu on screen.
To see the menu again, press
ENTER button to display.
EXIT
Returns to TV viewing.
Tips for playing video files
Some user-created subtitles may not work
y
properly.
Subtitles may not display some special
y
characters or HTML tags.
Subtitles in the non-supported languages are
y
unavailable.
The time information in an external subtitle
y
file should be arranged in ascending order to
play.
ENG
ENGLISH
%XWWHUIO\B

0
NOTE
Button
á°§
52
ENTERTAINMENT
The TV will not play the video files that has a
y
damaged index or no index.
Q.MENU options for movie list
1 Press Q. MENU.
A pop-up window will appear.
2 Press the Navigation buttons to scroll to movie
list option and press ENTER.
3 Press the Navigation buttons to scroll to one of
69
OPTION Settings
1 Press Home to access the main menus.
237,21
ᯒ0RYHᯙ(QWHU
2 Press the Navigation buttons to scroll to OPTION and press ENTER.
ؒ /DQJXDJH
ؒ &DSWLRQ
2II
3 Press the Navigation buttons to scroll to the setting or option you
ؒ ,600HWKRG
1RUPDO
want and press ENTER.
- To return to the previous level, press BACK.
ؒ 3RZHU,QGLFDWRU
ؒ ,QLWLDO6HWWLQJ
ؒ 6HW,'

ؒ 0RGH6HWWLQJ
+RPH8VH
4 When you are finished, press EXIT.
the following options and press ENTER.
The available general settings are described in the following.
Set Video Play.
Option
Setting
Description
Language
Description
Selects a desired language.
Picture Size
Selects your desired picture format
for videos.
yFull Mode: Files are played in full
screen mode according to the
aspect ratio of video.
yOriginal Mode: Files are played in
their native size.
Audio
Language
Changes the Language Group of
the audio for video files. Files with
a single audio track cannot be
selected.
Subtitle
Language
The subtitles can be turned on or
off.
Text 1-4
Displays the audio portion of a TV program as text on the TV screen.
CC1 is the most common mode in use.
- Field 1 data channels: two Captions (CC1, CC2) and two Text (T1, T2).
- Field 2 data channels: two Captions (CC3, CC4) and two Text (T1, T2).
Activated for SMI subtitles and
can select the language within the
subtitle.
Service 1-6
This is only available for the digital broadcasting system.
Language
Subtitle font selection. When set
to default, contents are displayed
in the language set in "Option Language - Menu Language."
Size
Selects the word size.
Font
Selects a typeface for the text.
Text Color
Selects a color for the text.
Subtitle
Language Group
Text Opacity
Adjusts the opacity for the text color.
Bg Color
Selects a background color.
Bg Opacity
Adjusts the opacity for the background color.
Edge Type
Selects an edge type.
Edge Color
Selects a color for the edges.
Code Page
Latin1
Korean
Supported
Language
English, Spanish,
French
English, Korean
Option
Caption
Menu Language
Selects a language for the display text.
Audio Language
Selects an audio language for your program. This feature operates only
in the DTV or CADTV mode.
Sets whether to display captions and customize your option in each mode.
Mode
CC 1-4 (Closed
Captioning)
Option (For DTV, CADTV)
Sync
If the video is not synchronized
with the captions, it can be adjusted
by 0.5 second.
Position
Move the location of the subtitles.
Size
Changes the subtitle font size.
Standby Light
Sets to turn on or off the indicator light in Standby mode.
Power Light
Sets to turn on or off the indicator light when you turn on the power.
Repeat
Turn on/off repeat function of movie
playback. When turned on, the
file within the folder will be played
back repeatedly. When turned off,
if the next file name is similar to
the previous file, it can be played
sequentially.
Power Indicator Sets to turn on or off the indicator light on the TV.
(LED LCD TV)
Option
ENG
ENGLISH
ENGLISH
ENG
The screen may suffer from temporary
y
interruptions such as image stoppage or
faster playback when you change the audio
language.
If you play a damaged video file, the video
y
file may not be played correctly or some
player functions may not be unavailable.
The TV may not properly play the video files
y
produced with certain encoders.
If the recorded file does not have video or
y
audio, either video or audio is not outputted
If the TV plays the recorded file without
y
video or audio, either video or audio is not
outputted.
The TV may not smoothly play the video files
y
with a resolution higher than the supported
resolution for each frame.
The TV may not properly play the video
y
files not included on the specified type and
format.
The TV may not play the files encoded with
y
GMC (Global Motion Compensation) or
quarter-pel motion estimation.
The TV supports the only files saved in ASCII
y
code in subtitles.
The maximum number of characters
y
displayed on each subtitle line is 250
(Korean), 500 (English), and 500 (Numbers).
The TV supports the only 10,000 sync blocks
y
within the subtitle file.
The TV supports the H.264 codec up to the
y
profile level 4.1.
The TV does not support DTS audio codec.
y
The TV cannot play a video file whose size is
y
larger than 30 GB.
If you play a video file through the USB
y
connection that does not support the high
speed, the video player may not work
properly.
The TV supports a USB storage device
y
whose version is lower than 2.0. However,
the USB storage device may not work
properly in the movie list.
The video file and its subtitle should be in
y
the same folder and the name of the video
file and subtitle should be identical.
You can adjust the image by using ENERGY
y
SAVING and AV MODE. But you cannot
customize image options of each mode.
The TV may not play the video files in the
y
supported file format depending on the
encoded condition.
CUSTOMIZING SETTINGS
68
CUSTOMIZING SETTINGS
ENTERTAINMENT
Setting
TV RatingGeneral
(Depending on
model)
Description
Blocks the TV programs that you want based on the ratings by using the Parental Control Function
(V-Chip).
NOTE
yThe V-Chip electronically reads TV program ratings and allows parents to block program that
are unsuitable for children.
Rating
TV-G (General audience, suitable for all ages)
TV-PG (Parental guidance suggested, containing material that are unsuitable for
younger children)
TV-14 (Parents strongly cautioned, containing material that are unsuitable for
children age 14 and under)
TV-MA (Mature audience only, unsuitable for children age under 17)
Age
Dialog
(suggestive
dialogue)
TV-PG or TV-14
Language
TV-PG, TV-14, or TV-MA
(coarse language)
TV RatingFrench
(Depending on
model)
Downloadable
Rating
TV-PG, TV-14, or TV-MA
Violence
TV-PG, TV-14, or TV-MA
NOTE
When replaying a video file after stopping,
y
select “Yes” to restart where it previously
stopped.
If continuous series files exist within the
y
folder, the next file will automatically be
played. But, this excludes cases when the
Repeat function of Movie List Option is
turned “On” (See p.52) or when set as Play
Marked.
Set Video.
Allows you to change Video presets. (Refer to
"PICTURE Settings" on p.61).
Set Audio.
Allows you to change Video presets. (Refer to
"AUDIO Settings" on p.65).
Selecting Canadian English rating system.
Rating
Exempt
Children
C8+
Children eight years and older
General programming, suitable for all audiences
PG
Parental Guidance
14+
Viewers 14 years and older
18+
Adult programming
Blocking Off
Permits all programs
Selecting Canadian French rating system.
Rating
Exempt
General
8ans+
General-Not convenient for little children
13ans+
Not convenient for children of 13 years and younger
16ans+
Not convenient for children of 16 years and younger
18ans+
This programs is only for adults
Blocking Off
Permits all programs
This function operates only when TV has received Region5 Rating data.
The name of the rating option may differ.
NOTE
yThis feature is available only for digital channels.
Input Block
Blocks the input sources.
Key Lock
Locks or unlocks the buttons on the TV.
ENG
ENGLISH
ENGLISH
ENG
TV RatingEnglish
(Depending on
model)
Sex
(sexual situation)
53
54
ENTERTAINMENT
CUSTOMIZING SETTINGS
DivX registration code
Registering the DivX code
The DivX registration code allows you to rent or
purchase the latest movies at www.divx.com/vod.
To play a rented or purchased DivX file, the file’s
registration code should be same as your TV’s
DivX registration code.
1 Press Home to access the main menus.
2 Press the Navigation buttons to scroll to MY
MEDIA and press ENTER.
3 Press the Blue button.
4 Press the Navigation buttons to scroll to DivX
VOD Registration and press ENTER.
5 View the registration code of your TV.
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.0-c321 44.398116, Tue Aug 04 2009 14:24:39
Create Date                     : 2010:12:06 12:33:55+09:00
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2010:12:08 08:34:52-08:00
Metadata Date                   : 2010:12:08 08:34:52-08:00
Producer                        : Acrobat Distiller 9.4.0 (Windows)
Format                          : application/pdf
Title                           : Microsoft Word - G_User_s manual.doc
Creator                         : 
Document ID                     : uuid:af5dad5b-af0c-4a3e-adec-5127d18f19ee
Instance ID                     : uuid:307e7afd-3c6b-4935-8e64-5092711b4e4e
Has XFA                         : No
Page Count                      : 67
Author                          : 

EXIF Metadata provided by EXIF.tools