LG Electronics USA 47VX30MF LCD Monitor User Manual EMISSION TEST REPORT

Download:
Mirror Download [FCC.gov]
Document ID	1576296
Application ID	5LUx0XuScy7SBliaJvx3hw==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	248.33kB (3104172 bits)
Date Submitted	2011-11-07 00:00:00
Date Available	2011-12-22 00:00:00
Creation Date	2011-10-27 18:13:31
Producing Software	Microsoft® Office Word 2007
Document Lastmod	2011-10-27 18:20:51
Document Title	EMISSION TEST REPORT
Document Creator	Microsoft® Office Word 2007
Document Author:	최선미

Order Number
: GETEC-C1-11-209
FCC Part 15 subpart B
Test Report Number
: GETEC-E3-11-103
Page 1 / 1
APPENDIX G
: USER’S MANUAL
EUT Type: LCD Monitor
FCC ID.: BEJ42VX30MF
ENG
ENGLISH
OWNER’S MANUAL
MONITOR SIGNAGE
Please read this manual carefully before operating the
your set and retain it for future reference.
MONITOR SIGNAGE MODELS
47VX30MF
www.lg.com
2
TABLE OF CONTENTS
CONTENTS
ENGLISH
ENG
LICENSES
34
MAKING CONNECTIONS
35
Connecting to a HD receiver, DVD, Camcorder, Camera, Gaming Device or VCR
ASSEMBLING AND
PREPARING
35
- HDMI connection
Unpacking
35
- HDMI/DVI connection
Parts and buttons
36
- Component connection
Portrait Layout
36
- AV(CVBS) connection
Installing on a wall
37
Connecting to the LAN
37
- LAN connection
38
Daisy Chain Monitors
38
- RGB Mode
38
- AV(CVBS) Mode
39
TROUBLESHOOTING
42
SPECIFICATIONS
44
IR CODES
45
CONTROLLING THE MULTIPLE
PRODUCT
REMOTE CONTROL
player
10
USING THE MONITOR SET
10
Connecting to a PC
10
- Using the input list
11
- RGB connection
11
- HDM/DVI connection
12
- HDMI connection
13
CUSTOMIZING SETTINGS
13
Accessing main menus
14
- PICTURE settings
19
- AUDIO settings
20
- TIME settings
45
Connecting the cable
21
- OPTION settings
45
RS-232C Configurations
23
- TILE settings
45
Communication Parameter
46
Command reference list
48
Transmission / Receiving protocol
25
ENTERTAINMENT
25
Using integrated media features
25
- Connecting USB storage devices
26
- Browsing files
28
- Viewing Photos
29
- Listening to Music
30
- Viewing Movies
33
- DivX registration code
33
- Deactivating the DivX feature
LICENSES
LICENSES
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks
or registered trademarks of HDMI Licensing LLC.
ABOUT DIVX VIDEO: DivXÂŽ is a digital video format created by DivX, LLC, a
subsidiary of Rovi Corporation. This is an official DivX CertifiedÂŽ device that
plays DivX video. Visit divx.com for more information and software tools to
convert your files into DivX videos.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX CertifiedÂŽ device must be
registered in order to play purchased DivX Video-on-Demand (VOD) movies.
To obtain your registration code, locate the DivX VOD section in your device
setup menu. Go to vod.divx.com for more information on how to complete
your registration.
DivX CertifiedÂŽ to play DivXÂŽ video, including premium content.
DivXÂŽ, DivX CertifiedÂŽ and associated logos are trademarks of Rovi
Corporation or its subsidiaries and are used under license.
Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668;
7,515,710; 7,519,274
ENGLISH
Supported licenses may differ by model. For more information of the licenses, visit www.lg.com.
4
ASSEMBLING AND PREPARING
ASSEMBLING AND PREPARING
ENGLISH
ENG
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual product
and accessories.
POWER
ENERGY
MONITOR
INPUT
OFF
ON
SAVING
.,!
GHI
PQRS
1/a/A
ABC
JKL
TUV
-*#
DEF
MNO
WXYZ
CLEAR
MARK
ARC
PSM
BRIGHT A
NESS G
MUTE
MENU
AUTO
BACK
TILE
S.MENU
OK
EXIT
ID
ON
OFF
Remote control and Batteries
CD (Owner's Manual) / Card
Power Cord
D-Sub Signal Cable
CAUTION
Do not use any pirated items to ensure the safety and product life span.
y
Any damages or injuries by using pirated items are not covered by the warranty.
y
NOTE
The accessories supplied with your product may vary depending on the model.
y
Product specifications or contents in this manual may be changed without prior notice due to upgrade
y
of product functions.
ASSEMBLING AND PREPARING
Parts and buttons
FFC
Screen Buttons
Screen Marks
RS-232C
(CONTROL)
HDMI / DVI
RGB IN
AUDIO
(RGB/DVI)
COMPONENT IN
AV IN / OUT
OUT
IN
USB
LAN
IN
RGB OUT
VIDEO
AUDIO
AUDIO
VIDEO
OUT
Connection panel ( See p.35 to p.37 )
Screen Marks
Description
INPUT
Changes the input source.
MENU
Accesses the main menus, or saves your input and exits the menus.

Adjust the up and down.

Adjusts the volume level.
AUTO/SET
Auto setup when using RGB input. It is also the Set or enter button to make changes in
the on-screen menus.
Turns the power on or off.
/I
IR Receiver
This is where the unit receives signals from the remote control.
Power Indicator
This Indicator lights up blue when the display operates normally(on mode). If the display
is in sleep (Energy Saving) mode, this indicator color changes to amber.
NOTE
You can set the Power indicator to on or off by selecting OPTION in the main menu.
y
ENG
ENGLISH
IR/LED PCB
6
ASSEMBLING AND PREPARING
Using the FFC/IR PCB
Portrait Layout
ENGLISH
ENG
- Only on some models.
When installing in a Portrait Layout, rotate the
monitor clockwise 90 degrees (when facing the
screen).
1 Remove the securing tape first.
2 Do not pull out the FFC, as this may cause
damage.
3 Be careful not to damage the product during
installation.
Using the Kensington security system
The Kensington security system connector is
located at the back of the Monitor set. For more
information of installation and using, refer to the
manual supplied with the Kensington security
system or visit http://www.kensington.com .
Installing on a wall
Install the monitor at least 10 cm away from the
wall and leave about 10 cm of space at each side
of the monitor to ensure sufficient ventilation. Detailed installation instructions can be obtained from
your local retail store. Please refer to the manual
to install and set up a tilting wall mounting bracket.
Connect the Kensington security system cable
between the Monitor set and a table.
10 cm
10 cm
10 cm
10 cm
10 cm
If you intend to mount the monitor to a wall, attach
Wall mounting interface (optional parts) to the back
of the set.
When you install the monitor using the wall
mounting interface (optional parts), attach it
carefully so it will not drop.
NOTE
The Kensington security system is optional.
y
You can obtain additional accessories from
most electronics stores.
1 Please, Use the screw and wall mount interface
in accordance with VESA Standards.
2 If you use screw longer than standard, the
monitor might be damaged internally.
ASSEMBLING AND PREPARING
3 If you use improper screw, the product might
4 VESA compatible.
5 Please use VESA standard as below.
785mm(31 inch) or greater
y
* Fastening screw: Diameter 6.0 mm x Pitch 1.0
mm x Length 10 mm
(32 inch is Diameter 4.0 mm x Pitch 0.7 mm x
Length 10 mm)
Model
47VX30MF
VESA (A x B)
Standard screw
Number of screws
800 x 600
M6
CAUTION
Disconnect the power cord first, and then
y
move or install the TV. Otherwise electric
shock may occur.
If you install the TV on a ceiling or slanted
y
wall, it may fall and result in severe injury.
Use an authorized LG wall mount and
y
contact the local dealer or qualified
personnel.
Do not over tighten the screws as this may
y
cause damage to the TV and void your
warranty.
Use the screws and wall mounts that meet
y
the VESA standard. Any damages or injuries
by misuse or using an improper accessory
are not covered by the warranty.
VESA (A x B)
y
NOTE
Use the screws that are listed on the VESA
y
standard screw specifications.
The wall mount kit includes an installation
y
manual and necessary parts.
The wall mount bracket is optional. You can
y
obtain additional accessories from your local
dealer.
The length of screws may differ depending
y
on the wall mount. Be sure to use the proper
length.
For more information, refer to the instructions
y
supplied with the wall mount.
ENG
ENGLISH
be damaged and drop from mounted position.
In this case, LG Electronics is not responsible
for it.
8
REMOTE CONTROL
REMOTE CONTROL
ENGLISH
ENG
The descriptions in this manual are based on the buttons of the remote control. Please read this manual
carefully and use the Monitor set correctly.
To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching and ends to the
label inside the compartment, and close the battery cover.
To remove the batteries, perform the installation actions in reverse.
CAUTION
Do not mix old and new batteries, as this
y
may damage the remote control.
Make sure to point the remote control to the
y
remote control sensor on the Monitor set.
POWER
ENERGY
MONITOR
INPUT
OFF
ON
SAVING
.,!
GHI
PQRS
1/a/A
ABC
JKL
TUV
-*#
DEF
MNO
WXYZ
CLEAR
MARK
ARC
PSM
BRIGHT A
NESS G
MUTE
MENU
AUTO
BACK
TILE
S.MENU
OK
EXIT
ID
ON
ENERGY SAVING
Adjusts the brightness of
the screen to reduce energy
consumption.
(POWER)
Turns the Monitor set on or off.
Monitor On / Off
Turn off the monitor and then
turn it back on.
OFF
POWER
ENERGY
MONITOR
INPUT
Selects the input mode.
INPUT
OFF
ON
SAVING
1/a/A Button
This button selection is not
applicable.
ARC
Selects the Aspect Ratio
Mode.
.,!
GHI
PQRS
1/a/A
ABC
JKL
TUV
-*#
Number and Alphabet buttons
Enters numbers.
The alphabet selection is not
applicable.
DEF
MNO
WXYZ
Clear
This button selection is not
applicable.
CLEAR
MARK
ARC
(VOLUME)
Adjusts the volume level.
PSM
BRIGHT A
NESS G
PSM
Selects the Picture Status
Mode.
MUTE
Mutes all sounds.
MUTE
MENU
AUTO
S.MENU
Brightness Key
Adjust the brightness by
pressing the Up and Down
buttons on the remote control.
In USB mode, the OSD menu
has the Page function to
move to the next file list.
9
USING THE MONITOR SET
ENG
ENGLISH
POWER
ENERGY
MONITOR
INPUT
OFF
ON
SAVING
.,!
GHI
PQRS
1/a/A
ABC
JKL
TUV
-*#
DEF
MNO
WXYZ
CLEAR
MARK
ARC
PSM
BRIGHT A
NESS G
MUTE
MENU
AUTO
BACK
TILE
S.MENU
OK
EXIT
ID
ON
MENU (See p.13)
Accesses the main menus
or saves your input and exit
menus.
AUTO
Automatically adjusts picture
position and minimizes image
instability.(RGB input only)
Navigation buttons
Scrolls through menus or
options.
NESS
OK
Selects menus or options and
confirms your input.
ID ON/OFF
When the number of input ID
is equal to the number of ID
Mode, you can control the
monitor which you want in the
multi display condition.
MUTE
MENU
BACK
Allows the user to move back
one step in an interactive
application, EPG or other user
interaction function.
OFF
AUTO
S.MENU
S.MENU
(SuperSign Menu Key)
This button selection is not
applicable.
OK
BACK
TILE
ID
ON
OFF
EXIT
EXIT
Clears all on-screen displays
and returns to Monitor set
viewing from any menu.
TILE
Selects the TILE Mode.
USB Menu control buttons
Controls media playback.
10
USING THE MONITOR SET
USING THE MONITOR SET
ENGLISH
ENG
Connecting to a PC
Your Monitor set supports the Plug & Play* feature.
* Plug & Play: The function when a PC recognizes
a connected device that users connect to a PC
and turn on, without device configuration or user
intervention.
Using the input list
Selecting an input source
1 Press INPUT to access the input source list.
- The connected device displays on each input
source.
2 Press the Navigation buttons to scroll to one of
the input sources and press OK.
Input source
NOTE
It is recommended to use the Monitor set
y
with an HDMI connection for the best image
quality.
If you turn the Monitor set on when cold, the
y
screen may flicker. This is normal.
Some red, green, or blue spots may appear
y
on the screen. This is normal.
CAUTION
Connect the signal
y
input cable and tighten
it by turning the screws
clockwise.
Do not press the screen with your finger for
y
a long time as this may result in temporary
distortion on the screen.
Avoid displaying a fixed image on the
y
screen for a long period of time to prevent
image burn. Use a screensaver if possible.
Description
AV(CVBS)
A VCR or other external devices
Component
Older devices that do not have
HDMI.
RGB
Computer input.
HDMI/DVI
Preferred connection type.
Supports high resolution inputs.
USING THE MONITOR SET
11
HDM/DVI connection
Transmits the analog video signal from your PC to
the Monitor set. Connect the PC and the Monitor
set with the D-sub 15 pin cable as shown the
following illustrations.
Select RGB input source.
Transmits the digital video signal from your PC to
the Monitor set. Connect the PC and the Monitor
set with the HDMI/DVI cable as shown the
following illustrations.
Select HDMI/DVI input source.
PC
PC
PC/MAC
(not included)
PC
(not included)
Macintosh Adapter
(not included)
Back of the product.
NOTE
Back of the product.
NOTE
Apple computers may
y
require an adapter
to connect to this
monitor. Call or visit
their web site for more
information.
When using computer input with HDMI, you
y
must set the label of that HDMI input to PC.
Use a shielded signal interface cable, such
y
as D-sub 15 pin signal cable and DVI to
HDMI cable, with a ferrite core to maintain
standard compliance for the product.
ENG
ENGLISH
RGB connection
12
USING THE MONITOR SET
HDMI connection
ENGLISH
ENG
Transmits the digital video and audio signals from
your PC to the Monitor set. Connect the PC and
the Monitor set with the HDMI cable as shown in
the following illustrations.
Select HDMI/DVI input source.
PC
(not included)
HDMI/DVI
Back of the product.
NOTE
Use a High Speed HDMI™ Cable.
y
Please check the PC environment if you
y
cannot hear the sound in HDMI mode. Some
PCs require you to manually change the
default audio output to HDMI.
If you want to use HDMI-PC mode, you must
y
set the input label to PC mode.
CUSTOMIZING SETTINGS
13
CUSTOMIZING SETTINGS
ARC
PSM
BRIGHT A
NESS G
1 Press MENU to access the main menus.
MUTE
MENU
Press the Navigation buttons to scroll to one of the following menus and
press OK.
S.MENU
OK
BACK
3 Press the Navigation buttons to scroll to the setting or option you want
AUTO
TILE
EXIT
ID
ON
OFF
and press OK.
4 When you are finished, press EXIT.
When you return to the previous menu, press BACK.
PICTURE (See p.14)
Adjusts the image size,
quality, or effect.
3,&785(
OPTION (See p.21)
Customizes the general
settings.
237,21
AUDIO (See p.19)
Adjusts the sound quality,
effect, or volume level.
$8',2
7,/(
7,0(
86%
TILE (See p.23)
Adjusts the tile options.
TIME (See p.20)
Sets the time, date, or
Timer feature.
USB (See p.25)
Using integrated media
features.
ENG
ENGLISH
Accessing main menus
14
CUSTOMIZING SETTINGS
PICTURE settings
PICTURE
ENGLISH
ENG
Aspect Ratio
1 Press MENU to access the main menus.
Energy Saving
: 16:9
: Standard
press OK.

  
Press the Navigation buttons to scroll to the setting or
option you want and press OK.

 

  
 
  "
- To return to the previous level, press BACK.
4 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
OK
: Off
Picture Mode
2 Press the Navigation buttons to scroll to PICTURE and
Move


 

Screen
The available picture settings are described in the following:
Setting
Aspect Ratio
Description
Changes the image size to view images at its optimal size (See p.17 to p.18).
Energy Saving Sets to automatically adjust the screen brightness corresponding to the surroundings.
Level
Off
100% light
Level 1
80% light
Level 2
60% light
Level 3
40% light
NOTE
If the 'Picture Mode' is set to 'Cinema', the 'Energy saving' mode is disabled.
y
Picture Mode
Selects one of the preset image or customizes options in each mode for the best Monitor set screen
performance. You are also able to customize advanced options of each mode.
The available preset picture modes vary depending on the Monitor set .
Mode
Vivid
Adjusts the video image for the retail environment by enhancing the contrast,
brightness, Color, and sharpness.
Standard
Adjusts the image for the normal environment.
Cinema
Optimizes the video image for a cinematic look to enjoy movies as if you are in a
movie theater.
Sport
Optimizes the video image for high and dynamic actions by emphasizing primary
Colors such as white, grass, or sky blue.
Game
Optimizes the video image for a fast gaming screen such as PCs or games.
Expert1/2
Adjusts the detailed video image settings for video experts as well as general
viewers. Refer to the Basic image options. (See p.15).
CUSTOMIZING SETTINGS
Customizes the PC display options in RGB mode.
Option
Resolution
Selects a proper resolution. See “Customizing PC display options”.
Auto Config.
Sets to adjust the screen position, clock, and phase automatically.
The displayed image may be unstable for a few seconds while the configuration is
in progress.
Position/Size/
Phase
Adjusts the options when the picture is not clear, especially when characters are
shaky, after the auto configuration.
Reset
Restores the options to the default setting.
Basic image options
Setting
Description
Backlight
Adjusts the brightness of the screen by controlling the LCD backlight. If you decrease the brightness
level, the screen becomes darker and the power consumption will be reduced without any video
signal loss.
Contrast
Increases or decreases the gradient of the video signal. You may use Contrast when the bright part
of the picture is saturated.
Brightness
Adjusts the base level of the signal in the picture. You may use Brightness when the dark part of the
picture is saturated.
Sharpness
Adjusts the level of crispness in the edges between the light and dark areas of the picture. The lower
the level, the softer the image.
Color
Adjusts intensity of all colors.
Tint
Adjusts the balance between red and green levels.
Advanced
Control
Customizes the advanced options. Refer to the Advanced image options. (See p.16).
Picture Reset
Restores the options to the default setting.
NOTE
If the 'Picture Mode' setting in the Picture menu is set to Vivid, Standard, Cinema, Sport or Game
y
the subsequent menus will be automatically set.
You cannot adjust color and tint in the RGB-PC / HDMI-PC mode.
y
When the Expert 1,2 is selected, you can select Backlight, Contrast, Brightness, H Sharpness, V
y
Sharpness, Color or Tint .
ENG
ENGLISH
SCREEN
(In RGB
Mode Only)
15
16
CUSTOMIZING SETTINGS
Advanced image options
ENGLISH
ENG
Setting
Colour
Temperature
Dynamic
Contrast
Description
Set to warm to enhance hotter Colors such as red, or set to cool to make picture bluish.
Option
Cool
Sets the screen color to a bluish tone.
Medium
Sets the screen to the standard color.
Warm
Sets the screen color to a reddish tone.
Adjusts the contrast to keep it at the best level according to the brightness of the screen. The
picture is improved by making bright parts brighter and dark parts darker. (This function can be used
only under AV(CVBS) and Component.)
Dynamic Color Adjusts screen Colors so that they look livelier, richer and clearer. This feature enhances
hue, saturation and luminance so that red, blue, green and white look more vivid. (This function can
be used only under AV(CVBS) and Component.)
Noise
Reduction
Reduces screen noise without compromising video quality. (This function can be used only under
AV(CVBS) and Component.)
Gamma
Set your own gamma value. On the monitor, high gamma values display whitish images and low
gamma values display high contrast images.
Black Level
Âť Low: The picture of the screen gets darker.
Âť High: The picture of the screen gets brighter.
Set black level of the screen to proper level.
(Function works in the following mode - AV(CVBS), Component, HDMI-DTV)
Film Mode
You can watch a cinema-like video by eliminating judder effect.
Use this function when you watch movies.
White Balance
This is the function to adjust the overall Color of the image to the feeling you want.
(Function works in the following mode - Expert 1, Expert 2 Picture mode)
Color
Management
System
As the tool used by the experts to make adjustments by using the test patterns, this does not
affect other Colors but can be used to selectively adjust the 6 Color areas (Red/Green/Blue/
Cyan/ Magenta/Yellow). Color difference may not be distinctive even when you make the
adjustments for the general video.
Adjusts Red/Green/Blue/Yellow/Cyan/Magenta.
Âť Red/Green/Blue/Yellow/Cyan/Magenta Color: The adjustment range is -30 to +30.
Âť Red/Green/Blue/Yellow/Cyan/Magenta Tint: The adjustment range is -30 to +30.
(Function works in the following mode - Expert 1, Expert 2 Picture mode)
CUSTOMIZING SETTINGS
Aspect Ratio
CAUTION
If a fixed image displays on the screen for a
y
long period of time, it will be imprinted and
become a permanent disfigurement on the
screen. This is “image burn” or “burn-in” and
not covered by the warranty.
If the aspect ratio is set to 4:3 for a long
y
period of time, image burn may occur on
the letterboxed area of the screen.
- 16:9 : The following selection will allow you
to adjust the picture horizontally, in linear
proportion, to fill the entire screen(useful for
viewing 4:3 formatted DVDs).
- Just Scan : Following Selection will lead to you
view the picture of best quality without loss of
original picture in high resolution image. Note: If
there is noise in original Picture, You can see the
noise at the edge.
Just Scan
- Original : The aspect ratio is not adjusted from
the original. It is set by the program being
watched.
Original
- 4:3 : The following selection will allow you to
view a picture with an original 4:3 aspect ratio,
gray bars will appear on both the left and right of
the screen.
- 1:1 : The aspect ratio is not adjusted from the
original. (Only HDMI/DVI PC, RGB PC)
- 14:9 : You can view a picture format of 14:9 or a
general Monitor set program in the 14:9 mode. The
14:9 screen is viewed in the same way as in 4:3,
but is magnified to the left and right.
ENG
ENGLISH
Resize the image to view the image at its optimal
size by pressing ARC button.
17
18
CUSTOMIZING SETTINGS
ENGLISH
ENG
- Zoom : The following selection will allow you
to view the picture without any alteration, while
filling the entire screen. However, the top and
bottom of the picture will be cropped.
- Cinema Zoom 1 : Choose Cinema Zoom
when you want to enlarge the picture in correct
proportion. Note: When enlarging or reducing
the picture, the image may become distorted.
- Full Wide : When Monitor set receives the wide
screen signal,it will lead you to adjust the picture
horizontally or vertically, in a linear proportion,to
fill the entire screen fully.
Full Wide
MODE
AV
Component
ARC
HDMI/DVI
RGB
DTV
PC
PC
16:9
Just Scan
Original
4:3
1:1
14:9
Zoom
Cinema Zoom 1
Full Wide
CUSTOMIZING SETTINGS
AUDIO settings
AUDIO
2 Press the Navigation buttons to scroll to AUDIO and press
Auto
Auto Volume
Volume
Off
:: Off
Clear Voice II
: Off
$
Balance
OK.
3 Press the Navigation buttons to scroll to the setting or
option you want and press OK.
OK
Sound Mode
: Standard
&



"
- To return to the previous level, press BACK.
4 When you are finished, press EXIT.
When you return to the previous menu, press BACK.
The available audio options are described in the following:
Setting
Description
Auto Volume
To adjust uneven sound volumes across all channels or signals automatically to the most
appropriate level. To use this feature, select On.
Clear Voice ll
By differentiating the human sound range from others,it helps users listen to human voices better.
Balance
Adjusts balance between the left and right speakers according to your room environment.
Sound Mode
Selects one of the preset sound modes or customize each option in each mode.
Mode
Standard
Select when you want standard-quality sound.
Music
Select when you listen to music.
Cinema
Select when you watch movies.
Sport
Select when you watch sports events.
Game
Select when you watch sports events.
ENG
ENGLISH
1 Press MENU to access the main menus.
Move
19
20
CUSTOMIZING SETTINGS
TIME settings
TIME
ENGLISH
ENG
Clock
Clock
1 Press MENU to access the main menus.
2 Press the Navigation buttons to scroll to TIME and press
OK.
3 Press the Navigation buttons to scroll to the setting or option
you want and press OK.
Move
OK
+;;+;;;;;;
Off Time
: Off
On Time
: Off
Sleep Timer
: Off
Auto Off
: On
Power On Delay
: Off
Automatic Standby : On(4hours)
- To return to the previous level, press BACK.
4 When you are finished, press EXIT.
When you return to the previous menu, press BACK.
The available time settings are described in the following:
Setting
Description
Clock
Sets the time feature.
On/Off Time
Sets the time to turn on or off the Monitor set.
Sleep Timer
Sets the length of time until the Monitor set to turns off. When you turn the Monitor set off and
turn it on again, the Sleep Timer will be set to off.
Auto off
If Auto off is active and there is no input signal, the set switches to off mode automatically after
10 minutes.
Power on delay
When connecting multiple monitors and turning the power on, the monitors are turned on
individually to prevent overload.
Automatic Standby If you do not use the monitor for more than 4 hours, it will be in standby mode automatically.
NOTE
yOnce the on or off time is set, these functions operate daily at the preset time.
yThe scheduled power-off function works properly only when the device time is set correctly.
yWhen the scheduled power-on and power-off times are the same, the power-off time has priority over the
power-on time if the set is turned on, and vice versa if the set is turned off.
The 'Automatic Standby' function may not be available depending on the country.
y
21
CUSTOMIZING SETTINGS
OPTION settings
OPTION
2 Press the Navigation buttons to scroll to OPTION and press
OK.
3 Press the Navigation buttons to scroll to the setting or option
you want and press OK.
Language
Input Label
English
:: English
Key Lock
: Off
Set ID
: Off
ISM Method
: Normal
DPM Select
: On
Power Indicator
: ON
Interface Select
: RS232C
OK
Network Setup
- To return to the previous level, press BACK.
Information
Factory Reset
4 When you are finished, press EXIT.
When you return to the previous menu, press BACK.
The available option settings are described in the following:
Setting
Description
Language
To choose the language in which the control names are displayed.
Input Label
Selects a label for an input source to identify a device connected to each input source.
NOTE
yIf you want to use HDMI-PC mode, you must set the input label to PC mode.
Key Lock
Use the buttons to select On or Off. The monitor can be set up so that it can only be used with the
remote control. This feature can prevent unauthorized viewing.
In order to lock the OSD screen adjustment, set the Key Lock tab to the 'On' position.
In order to unlock it, do the following :
Push the MENU button on the remote control and set Key Lock to the 'Off' position.
Set ID
You can assign a unique Set ID NO (name assignment) to each product when several products
are connected for display. Specify the number (1 to 99) using the button and exit. Use the
assigned Set ID to individually control each product using the Product Control Program.
ISM Method
A frozen or still picture from a PC/Video game displayed on the screen for prolonged periods
could result in a ghost image remaining even when you change the image. Avoid allowing a fixed
image to remain on the screen for a long period of time.
Setting
Normal
Leave on normal if you don't foresee image burn in being a problem.
Orbiter
May help prevent ghost images. However, it is best not to allow any fixed
image to remain on the screen. To avoid a permanent image on the screen,
the screen will move every 2 minutes.
Inversion
This function inverts the panel color of the screen. The panel color is
automatically inverted every 30 minutes.
White wash
White wash fills the screen with solid white. This helps removes permanent
images burned into the screen. A permanent image may be impossible to clear
entirely with white wash.
DPM Select
A user can choose to turn the power saving mode on / off.
Power Indicator
Use this function to set the power indicator on the front side of the product to On or Off.
ENG
ENGLISH
1 Press MENU to access the main menus.
Move
22
CUSTOMIZING SETTINGS
Setting
ENGLISH
ENG
Interface Select
Description
Sets up network connections.
Option
Network Setup
RS-232C
Enables communication via Serial.
Network
LAN - Enables communication via Ethernet.
Option
DHCP
Allocates and sets up IP automatically.
Manual
Sets up IP address, Gateway, Subnet Mask, Primary DNS and Secondary
DNS.
The setup process is complete when you select Execute, and "IP Setup
Completed" is displayed at the bottom of the screen. While "Wait for IP Setup"
is displayed, you cannot use the local keys and remote control. "Wait for IP
Setup" is displayed for up to 40 seconds.
* If Network select is set to RS232C.DHCP and Manual are disabled.
Information
You can find informations about Serial No, F/W version, IP Address and MAC Address.
Factory Reset
Select this option to return to the default factory settings.
23
CUSTOMIZING SETTINGS
TILE settings
TILE
2 Press the Navigation buttons to scroll to TILE and press
OK.
3 Press the Navigation buttons to scroll to the setting or
:: 2x2
Off
Tile ID
:0
Natural Mode
: Off
H Size
:0
V Size
:0
H Position
:0
V Position
:0
OK
Reset
option you want and press OK.
- To return to the previous level, press BACK.
4 When you are finished, press EXIT.
When you return to the previous menu, press BACK.
The available lock settings are described in the following:
Setting
Description
Tile Mode
To use this function
- Must be displayed with various other products.
- Must be in a function that can be connected to RGB Cable by distributor and RS-232C.
Tile mode and choose Tile alignment and set the ID of the current product to set location.
* Only after pressing the SET button the adjustments made to the settings will be saved.
- Tile mode : column x row ( c = 1, 2, 3, 4, 5 r = 1, 2, 3, 4, 5)
- 5 x 5 available.
- Configuration of an integration screen is also available as well as configuration of One by one
Display.
Tile ID
Select the location of the Tile by setting an ID.
Natural
The image is omitted by the distance between the screens to be naturally shown.
H-Size
Adjust the horizontal size of the screen taking into account the size of the bezel.
V-Size
Adjust the vertical size of the screen taking into account the size of the bezel.
H-Position
Moving the screen position horizontally.
V-Position
Moving the screen position vertically.
Reset
Function to initialize and release Tile.
All Tile setting are released when selecting Tile recall and the screen returns to Full screen.
ENG
ENGLISH
1 Press MENU to access the main menus.
Move
Tile
TileMode
Mode
24
CUSTOMIZING SETTINGS
Tile Mode
ENGLISH
ENG
This monitor can be tiled with additional monitors to create a large tiled display.

When the Tile Mode
option is disabled
2X1:
When using 2 monitors
ID 1
3X3:
When using 9 monitors

When using 4 monitors
ID 2
ID 1
ID 2
ID 1
ID 2
ID 3
ID 3
ID 4
ID 4
ID 5
ID 6
ID 7
ID 8
ID 9
Tile ID
4X4:
When using 16 monitors
5X5:
When using 25 monitors
ID 1
ID 2
ID 3
ID 4
ID 1
ID 2
ID 3
ID 4
ID 5
ID 5
ID 6
ID 7
ID 8
ID 6
ID 7
ID 8
ID 9
ID 10
ID 9
ID 10
ID 11
ID 12
ID 11
ID 12
ID 13
ID 14
ID 15
ID 13
ID 14
ID 15
ID 16
ID 16
ID 17
ID 18
ID 19
ID 20
ID 21
ID 22
ID 23
ID 24
ID 25
Tile Mode - Natural mode
When active, the part of the image that would normally be displayed in the gap between the monitors is
omitted.
Before
After
ENTERTAINMENT
25
ENTERTAINMENT
Connecting USB storage devices
Connect USB storage devices such as a USB
flash memory, external hard drive, or MP3 player
to the Monitor set and use multimedia features
(“Browsing files” See p.27).
Connect a USB flash memory or USB memory
card reader to the Monitor set as shown on the
following illustration. The USB screen appears.
or
To disconnect a USB storage device,
make sure to end the connection properly to
prevent damages to the Monitor set or files.
CAUTION
Do not turn the Monitor set off or remove a
y
USB storage device while the USB storage
device is connected to the Monitor set, as
this could result in loss of files or damage to
the USB storage device.
Back up your files saved on a USB storage
y
device frequently, as you may lose or
damage the files and this may be not
covered by the warranty.
Precautions when using the USB device
Only a USB storage device is recognizable.
y
If the USB storage device is connected
y
through a USB hub, the device is not
recognizable.
A USB storage device using an automatic
y
recognition program may not be recognized.
A USB storage device which uses its own
y
driver may not be recognized.
The recognition speed of a USB storage
y
device may depend on each device.
Please do not turn off the Set or unplug
y
the USB device when the connected USB
storage device is working. When such device
is suddenly separated or unplugged, the
stored files or the USB storage device may
be damaged.
Please do not connect the USB storage
y
device which was artificially maneuvered on
the PC. The device may cause the product to
malfunction or fail to be played. Never forget
to use only a USB storage device which has
normal music files or image files.
Please use only a USB storage device which
y
was formatted as a FAT16, FAT32, NTFS file
system provided with the Windows operating
system. In case of a storage device
formatted as a different utility program which
is not supported by Windows, it may not be
recognized. Data in a USB storage device
cannot be deleted in the NTFS file system.
Please connect power to a USB storage
y
device which requires an external power
supply. If not, the device may not be
recognized.
Please connect a USB storage device with
y
cable is offered by USB maker. If connected
with cable is not offered by USB maker or an
excessively long cable, the device may not
be recognized.
Some USB storage devices may not be
y
supported or operated smoothly.
Maximum of 999 files and folders can be
y
recognized.
Data in a USB storage device cannot be
y
aligned. Up to 128 English characters can be
ENG
ENGLISH
Using integrated media
features
26
ENTERTAINMENT
ENGLISH
ENG
recognized as a file name.
Please back up the important file because a
y
data of USB device may be damaged. Data
management is consumer's responsibility
and in consequence the manufactures does
not cover the product bearing data damage.
If the USB is connected in Standby Mode,
y
specific hard disk will automatically be loaded
when the Set is turned on.
The recommended capacity is 1TB or less
y
for a USB external hard disk and 32GB or
less for USB memory.
Any device with more than the recommended
y
capacity may not work properly.
If a USB external hard disk with a “Power
y
Saving” function does not work, turn the
hard disk off and on again to make it work
properly.
Names and subtitles of some language files
y
may not display properly.(Korean, Chinese,
Japanese)
When using Korean or Chinese subtitles
y
or file names, it is recommended to set the
language to the corresponding one.
Browsing files
Access the Photo, Music or Movie lists and
browse files.
1 Connect a USB storage device.
2 Press MENU to access the main menus.
3 Press the Navigation buttons to scroll to USB
and press OK.
4 Press the Navigation buttons to scroll to
PHOTO LIST, MUSIC LIST or MOVIE LIST
and press OK.
PHOTO LIST
MUSIC LIST
USB
MOVIE LIST
Move
OK
Photo List
Music List
Movie List
DivX Reg.Code
Deactivation
5 Select Drive1 to access the connected USB
storage device
USB Device
3KRWR/LVW
3DJH
86%
'ULYH
1R0DUNHG
Free Space 150 MB
'ULYH
IROGHU V ILOH V
8S)ROGHU
1DYLJDWLRQ
2SWLRQ
3DJH&KDQJH
0DUN
([LW
ENTERTAINMENT
Supported file format
6 Select a folder you want.
Type
Photo
y JPG
y Available size
Baseline: 64 pixel (W) x 64 pixel (H) 15360 pixel (W) x 8640 pixel (H)
Progressive: 64 pixel (W) x 64 pixel (H) 1024 pixel (W) x 768 pixel (H)
Music
y MP3
y Bit rate range 32 Kbps to 320 Kbps
y Sampling rate (Sampling Frequency)
MPEG1 layer 3: 32 kHz, 44.1 kHz,
48 kHz
* A copy-protected file will not play.
Video
y MPEG1, MPEG2, MPEG4(Doesn't
support Microsoft MPEG 4-V2, V3),
DivX 3.xx, DivX 4.xx, DivX 5.xx, DivX
VOD(DRM), XviD, DivX 6.xx(Playback)
y Audio format: Mpeg, Mp3, PCM
y Sampling frequency: within 32k to 48khz
y Bit rate of audio format: within 32k to
320kbps
y Supported subtitle format: *.smi, *.srt,
*.sub (MicroDVD, SubViewer 2.0), *.ass,
*.ssa, *.txt (DVD Subtitle System)
USB Device
3DJH
86%
'ULYH
1R0DUNHG
Free Space 150 MB
+5
+5
+5
+5
+5
IROGHU V ILOH V
8S)ROGHU
1DYLJDWLRQ
3DJH&KDQJH
2SWLRQ
([LW
0DUN
7 Press the Navigation buttons to browse files.
The highlighted file will display in the preview
window.
3KRWR/LVW
USB Device
3DJH
'ULYH
-0-
1R0DUNHG
8S)ROGHU
[.%
8S)ROGHU
1DYLJDWLRQ
HR103
02/21/2010
HR101
02/21/2010
HR104
02/21/2010
HR102
02/21/2010
HR105
02/21/2010
JHR001
02/21/2010
JHR005
02/21/2010
JHR002
02/21/2010
JHR006
02/21/2010
JHR003
02/21/2010
JHR007
02/21/2010
JHR004
02/21/2010
JHR008
02/21/2010
2SWLRQ
No.
Free Space 150 MB
3DJH&KDQJH
MARK
0DUN
EXIT
([LW
Description
Current page number/total number of pages
The number of selected files
File and Folder name
Preview window
File size, information.
Return to the previous level
Available buttons on the remote control
Supported file format
ENG
ENGLISH
- To return to the previous level, select
Up Folder.
3KRWR/LVW
27
28
ENTERTAINMENT
Using photo options
Viewing Photos
ENGLISH
ENG
View image files saved in a USB storage device.
The displays on the screen may differ from the
model.
Use the following options while viewing photos.
1 Press the Navigation buttons to scroll to USB
and press OK.
2 Press the Navigation buttons to scroll to Photo
List and press OK.
<=>= ?
3 Press the Navigation buttons to select Drive1
  @[
to access the connected USB storage device.
\][
Delete
Option
Hide
Options
4 Press the Navigation buttons to scroll to a
Number of selected photos
folder you want and press OK.
Option
5 Press the Navigation buttons to scroll to a file
Starts or stops a slideshow with selected
photos.
If there are no selected photos, all
photos saved in the current folder
display during a slideshow.
To set a slideshow speed, select Option.
BGM
Turns the background music on or off.
To set the background music folder,
select Option.
you want and press OK.
A pop-up window will appears.
3KRWR/LVW
USB Device
3DJH
'ULYH
-+5
Free Space 150 MB
8S)ROGHU
HR103
02/21/2010
02/21/2010
HR102
HR104
1366x768, 125KB
02/21/2010
HR105
JHR001
02/21/2010
JHR005
02/21/2010
JHR002
02/21/2010
JHR006
02/21/2010
JHR003
02/21/2010
JHR007
02/21/2010
JHR004
02/21/2010
JHR008
02/21/2010
HR101
[.%
8S)ROGHU
1DYLJDWLRQ
1R0DUNHG
2SWLRQ
02/21/2010
View
Mark All
Delete
Close
3DJH&KDQJH
MARK
0DUN
02/21/2010
EXIT
Description
Slideshow
(Rotate)
Rotates photos clockwise (90°, 180°,
270°, 360°).
NOTE
The supported photo size is limited.
You cannot rotate a photo if the
resolution of the rotated width is
larger than the supported resolution
size.
([LW
6 View photos by using the following menus.
Menu
View
Description
Delete
Deletes a photo.
Option
y Slide Speed: Selects a slideshow
speed (Fast, Medium, Slow).
y Music Album: Selects a music folder
for the background music.
Displays the selected photo in a fullscreen view.
y Drive: Views photos saved in a
USB storage drive.
NOTE
Mark All
Selects all files or clears all of your
or Unmark selections
All
Delete
You cannot change the music folder
while the background music is
playing.
Deletes a file saved in a USB storage
device.
Hide
NOTE
You cannot delete the files saved
in a shared folder of a PC.
Close
Closes the pop-up menu.
Hides the option window.
To display the options, press OK.
ENTERTAINMENT
29
7 Control playback by using the following
Listening to Music
1 Press the Navigation buttons to scroll to USB
and press OK.
Button
Description
Stops playback
2 Press the Navigation buttons to scroll to Music
Plays a music file
List and press OK.
Pauses or resumes playback
3 Select Drive1 to access the connected USB
Skips to the next file
storage device.
Skips to the previous file
4 Press the Navigation buttons to scroll to a
folder you want and press OK.
5 Press the Navigation buttons to scroll to a file
you want and press OK.
NOTE
A pop-up window will appears.
USB Device
Music List
Page 2/3
Free Space 150 MB
Title
Music
S003
Up Folder
S001
S002
S003
00:00/01:34
S004
Duration
4395KB 1Kbps
Play
Play with Photo
Mark All
Delete
Close
S005
Up Folder
Navigation
No Marked
Option
Up Folder
03:33
04:45
01:30
02:37
01:58
Page Change
MARK
Mark
EXIT
Exit
A damaged or corrupted file will not play and
y
the duration of the file display as 00:00.
A copy-protected file will not play.
y
If the Monitor set is not in use for some time
y
during playback, the information box as a
screensaver will appear to prevent image
burn.
To return to the Music list screen, press OK,
y
BACK.
6 Play music by using the following menus.
Menu
Description
Play, Stop
Play, or
Play
Marked
Plays music, stops playback, or plays
the selected music file. If you play
music without selecting music files, all
of the music files saved in the current
folder will play.
The icon will appear in front of the
duration on the currently playing file.
y Drive: Listen to music files saved in
a USB storage drive.
Folder name/file name
Displays photos during playback.
Time elapsed /Duration
Play with
Photo
Mark All
Selects all files or clears all of your
or Unmark selections
All
Delete
Deletes a file saved in a USB storage
device.
Close
Closes the pop-up menu.
0XVLF
6

ENG
ENGLISH
buttons.
30
ENTERTAINMENT
Viewing Movies
ENGLISH
ENG
Play video files on the Monitor set. Your Monitor
set displays all of the video files saved in a USB
storage device.
Movie (*.dat / *.mpg / *.mpeg / *.vob/ *.m4v /
y
*.avi / *.divx) supporting file.
Video format: MPEG1, MPEG2,
y
MPEG4(Doesn’t support Microsoft MPEG
4-V2, V3), DivX 3.xx, DivX 4.xx, DivX 5.xx,
DivX VOD(DRM), XviD, DivX 6.xx(Playback)
Audio format: Mpeg, Mp3, PCM
y
Bit rate: within 32 kbps to 320 kbps (MP3)
y
Subtitle format: *.smi / *.srt / *.sub (Micro
y
DVD, SubViewer 2.0) / *.ass / *.ssa / *.txt (DVD
Subtitle System).
Some user-created subtitles may not work
y
properly.
Some special characters are not supported in
y
subtitles.
HTML tags are not supported in subtitles.
y
Subtitles in languages other than the
y
supported languages are not available.
Time information in an external subtitle file
y
should be arranged in ascending order to be
played.
The screen may suffer temporary interruptions
y
(image stoppage, faster playback, etc.) when
the audio language is changed.
A damaged movie file may not be played
y
correctly, or some player functions may not be
usable.
Movie files produced with some encoders may
y
not be played correctly.
If the video and audio structure of recorded
y
file is not interleaved, either video or audio is
outputted.
HD videos with a maximum of 1920 x 1080
y
@ 25/30P or 1280 x 720 @ 50/60P are
supported, depending on the frame.
Videos with resolutions higher than 1920 x
y
1080 @ 25/30P or 1280 x 720 @ 50/60P may
not work properly depending on the frame.
Movie files other than the specified types and
y
formats may not work properly.
Max bit rate of playable movie file is 20
y
Mbps.
We do not guarantee smooth playback of
y
profiles encoded level 4.1 or higher in H.264 /
AVC.
DTS Audio codec is not supported.
y
A movie file more than 30GB in file size is not
y
supported for playback.
A DivX movie file and its subtitle file must be
y
located in the same folder.
A video file name and its subtitle file name
y
must be identical for it to be displayed.
Playing a video via a USB connection that
y
doesn’t support high speed may not work
properly.
Files encoded with GMC (Global Motion
y
Compensation) may not be played.
When you are watching the movie by Movie
y
List function, you can adjust an image by
Energy Saving key on the remote control.
User setup for each image mode does not
operate.
Video Decoder
mpg, mpeg, vob, dat: MPEG1, MPEG2
y
avi, divx, m4v: MPEG4 SP, MPEG4 ASP,
y
DivX 3.xx, DviX 4.xx, DviX 5.xx, DviX 6.xx
(Playback), XviD
Audio Codec
mpg, mpeg, vob, dat, avi, divx, m4v: AC3,
y
MPEG, MP3, PCM
Max Resolution
720 x 576 @ 25p
y
720 x 480 @ 30p
y
31
ENTERTAINMENT
1 Press the Navigation buttons to scroll to USB
ENG
ENGLISH
and press OK.
2 Press the Navigation buttons to scroll to Movie
List and press OK.
3 Select Drive1 to access the connected USB
storage device.
4 Press the Navigation buttons to scroll to a
Option
folder you want and press OK.
5 Press the Navigation buttons to scroll to a file
Picture Size
you want and press OK.
âśž
Subtitle Language
A pop-up window will appears.
Full Screen
âśş
1/6
Audio Language
1/6
Subtitle File
Off

Latin 1
USB Device
Movie List
Page 2/3
Duration
Up Folder
640x480, 720KB
Option
Favorite Music
Play
M001
Mark All
M002
Delete
01:34:15
M001
Close
01:35:30
Mark
EXIT
01:30:20
Page Change
MARK
Exit
6 Play video by using the following menus.
Play or
Play
Marked
15
OK
When you select the Set Video Play.
Menu
Menu
+0.5
!!
1366x768, 125KB
M001
Up Folder

Free Space 150 MB
Title
Movie
M002
Navigation
No Marked
Description
Plays a movie or plays the selected
movie.
y Drive: Views videos saved in a USB
storage drive.
Mark All
Selects all files or clears all of your
or Unmark selections.
All
Delete or
Delete
marked
Deletes a file formatted on the FAT32
file system and saved in a USB
storage device.
Close
Closes the pop-up menu.
Description
Picture
Size
Selects your desired picture format during
movie play
Subtitle
Language
or Audio
Language
Changes the Language Group of the
subtitle/audio during movie play.
Language
Selects your desired Language.
Sync
Adjusts the time synchronisation of the
subtitle from -10 secs to +10 secs by
steps of 0.5 secs during
movie play.
Position
Changes the position of the subtitle either
up or down during movie play.
32
ENTERTAINMENT
1 Press the Navigation button to show the
ENGLISH
ENG
Picture Size, Audio Language or Subtitle
Language.
When you select the Set Video.
1 Press the Navigation button to make
appropriate adjustments. See p.8
2 Press the Navigation button to make
appropriate adjustments.
Subtitle
Language
Latin1
Support Language
English, Spanish, French, German,
Italian, Swedish, Finnish, Dutch,
Portuguese, Danish, Romanian,
Norwegian, Albanian, Gaelic, Welsh,
Irish, Catalan, Valencian
Latin2
Bosnian, Polish, Croatian, Czech,
Slovak, Slovenian, Serbian, Hungarian
Latin4
Estonian, Latvian, Lithuanian
Cyrillic
Bulgarian, Macedonian, Russian,
Ukrainian, Kazakh
Greek
Greek
Hebrew
Hebrew
Chinese
Chinese
Japanese
Japanese
Korean
Korean
When you select the Set Audio,
1 Press the Navigation button to show the
Sound Mode, Auto Volume, Clear Voice II,
Balance.
2 Press the Navigation button to make
appropriate adjustments.
Using the remote control.
Button
á°Şá°Š
Pause (á°¨)
During playback, press the Pause (á°¨)
button.
y Still screen is displayed.
y If no buttons are pressed on the
remote control for 10 minutes after
pausing, the Monitor set returns to
the playback state.
y Press the Pause (á°¨) button and
then use the FF (ᯛᯛ) button for slow
motion.
During playback, stops the screen.
Play á°Ś
Press the Play á°Ś button to return to
normal playback.
NOTE
Only the files saved in ASCII CODE is
y
supported for the external subtitles of the
movie.
Only 500 alphabets and 500 numbers are
y
supported for each line of the subtitle.
Only 10,000 of sync blocks can be
y
supported within the subtitle file.
Description
When playing,
repeatedly, press the REW(ᯚᯚ) button
to speed up ᯚᯚ(x2) ᯚᯚᯚ (x4)
ᯚᯚᯚᯚ(x8) ᯚᯚᯚᯚᯚ(x16) ᯚᯚᯚᯚᯚᯚ(x32) .
repeatedly, press the FF(ᯛᯛ) button
to speed up ᯛᯛ(x2) ᯛᯛᯛ (x4) ᯛᯛᯛᯛ (x8)
ᯛᯛᯛᯛᯛ(x16) ᯛᯛᯛᯛᯛᯛ(x32).
y Pressing these buttons repeatedly
increases the fast forward/reverse
speed.
ENTERTAINMENT
33
Deactivating the DivX feature
Check and register the DivX registration code of
your Monitor set so that you can rent or purchase
the latest movies at www.divx.com/vod . To play a
rented or purchased DivX file, the file’s registration
code should be same with your Monitor set’s DivX
registration code.
Deactivate all of the devices through the web
server and block devices from activating.
Delete the existing authentication information to
receive a new DivX user authentication for the
Monitor set. Once this function is executed, a DivX
user authentication is required again to see DivX
DRM files.
1 Press MENU to access the USB menus.
2 Press the Navigation button to scroll to DivX
Reg. Code and press OK.
3 View the registration code of your Monitor set.
1 Press MENU to access the USB menus.
2 Press the Navigation button to scroll to
Deactivation and press OK.
3 Select Yes to confirm.
DivX(R) Video On Demand
Your registration Code is: xxxxxxxxxx
To learn more visit www.divx.com/vod.
Close
Close
DivX(R) Video On Demand
Do you want to deactivate your device?
Yes
No
NOTE
While you are checking the registration code,
y
some buttons may not work.
If you use the DivX registration code of
y
another device, you cannot play the rented
or purchased DivX file. Make sure to use
the DivX registration code assigned to your
Monitor set.
The video or audio files that are not
y
converted by the standard DivX codec may
be corrupted or not be played.
The DivX VOD code allows you to activate
y
up to 6 devices under one account.
4 Select Close.
DivX(R) Video On Demand
This device is deactivated.
Your deactivation code is: xxxxxxxx
To learn more visit www.divx.com/vod.
Close
5 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
ENG
ENGLISH
DivX registration code
34
MAKING CONNECTIONS
MAKING CONNECTIONS
ENGLISH
ENG
Connect various external devices to the ports on the Monitor set’s back panel.
1 Find an external device you want to connect to your Monitor set shown on the following illustration.
2 Check the connection type of the external device.
3 Go to the appropriate illustration and check the connection details.
HD Receiver
HDMI - See p.35
DVI - See p.35
AV(CVBS) - See p.36
Component - See p.36
DVD
VCR
HDMI - See p.35
DVI - See p.35
AV(CVBS) - See p.36
Component - See p.36
AV(CVBS)
- See p.36
Component
- See p.36
Speaker
USB
Memory storage
– See p.25
PC
HDMI - See p.12
DVI - See p.11
RGB - See p.11
LAN - See p.37
Camcorder/Camera
HDMI - See p.35
DVI - See p.35
AV(CVBS) - See p.36
Component - See p.36
Gaming device
HDMI - See p.35
AV(CVBS)
- See p.36
Component
- See p.36
NOTE
If you connect a gaming device to the Monitor set, use the cable supplied with the gaming device.
y
MAKING CONNECTIONS
Connect a HD receiver, DVD, or VCR player to the
Monitor set and select an appropriate input mode.
HDMI/DVI connection
Transmits the digital video signal from an external
device to the Monitor set. Connect the external
device and the Monitor set with the HDMI/DVI
cable as shown in the following illustration. To
transmit an audio signal, connect an optional audio
cable.
HDMI connection
RGB IN
Transmits the digital video and audio signals from
an external device to the Monitor set. Connect the
external device and the Monitor set with the HDMI
cable as shown on the following illustration.
RGB IN
RGB OUT
HDMI Signal Cable
(not included)
NOTE
Use a High Speed HDMI™ Cable.
y
High Speed HDMI™ Cables are tested to
y
carry an HD signal up to 1080p and higher.
RGB OUT
HDMI-DVI
Signal Cable
(not included)
RCA-PC
Audio Cable
(not included)
ENG
ENGLISH
Connecting to a HD receiver,
DVD, Camcorder, Camera,
Gaming Device or VCR player
35
36
MAKING CONNECTIONS
ENGLISH
ENG
Component connection
AV(CVBS) connection
Transmits the analog video and audio signals from
an external device to the Monitor set. Connect
the external device and the Monitor set with the
component cable as shown on the following
illustration. To display images by using progressive
scan, make sure to use the component cable.
Transmits the analog video and audio signals from
an external device to the Monitor set. Connect the
external device and the Monitor set with the BNC
cable as shown on the following illustration.
AV IN / OUT
IN
PC
VIDEO
AUDIO
OUT
BNC Cable
(not included)
RCA-PC
Audio Cable
(not included)
MAKING CONNECTIONS
37
Connecting to the LAN
Connect the LAN cable and install the eZ-Net
Manager program on the CD-ROM.
For more information about the program, please
refer to eZ-Net Guide in the enclosed CD-ROM.
A Connect PC to Monitor directly.
LAN
PC
Monitor Set
B Using a router(Switch)
LAN
Switch
Monitor Set
PC
C Using the Internet.
LAN
Monitor Set
Network
PC
NOTE
Using LAN establishes communication
y
between your PC and the monitor and
enables to use the OSD menus on the PC as
well as on the monitor.
ENG
ENGLISH
LAN connection
38
MAKING CONNECTIONS
Daisy Chain Monitors
ENGLISH
ENG
Use this function to share the RGB video signal with other monitors without having to use a separate signal
splitter box.
#$! $$<<>$ <!?!Q?[\]!
D-Sub Signal Cable) to the RGB OUT connector of product 1 and connect the other end to the RGB IN
connector of other products
RGB Mode
15-pin D-Sub Signal Cable
(Max 3m)
Product 1
Product 2
Product 3
Product 4
AV(CVBS) Mode
Audio Cable
(Not included)
AV IN / OUT
AV IN / OUT
IN
VIDEO
AV IN / OUT
IN
AUDIO
OUT
VIDEO
IN
AUDIO
OUT
VIDEO
AUDIO
OUT
BNC Cable
(Not included)
Product 1
Product 2
NOTE
When multi-connecting in/out cascade format, no loss cables are recommended.
y
We recommend that you should use cable distributor.
y
Product 3
TROUBLESHOOTING
39
TROUBLESHOOTING
Problem
Resolution
Is the product power cord
connected?
y See if the power cord is properly connected to the outlet.
Is the power indicator light on?
Power is on, power indicator
is blue but the screen appears
extremely dark.
The power indicator amber?
Does the 'Out of range'
message appear?
Does the 'Check signal cable'
message appear?
See if the power switch is turned on.
May need service.
Adjust brightness and contrast again.
Backlight may need repair.
y If the product is in power saving mode, move the mouse or press any
key.
y Turn both devices off and then back on.
y The signal from the PC (video card) is out of the vertical or horizontal
frequency range of the product. Adjust the frequency range by
referring to the Specifications in this manual.
* Maximum resolution
RGB : 1920 x 1080 @ 60 Hz
HDMI/DVI : 1920 x 1080 @ 60 Hz
y The signal cable between PC and product is not connected. Check
the signal cable.
y Press the 'INPUT' menu in the remote Control to check the input
signal.
'Unknown Product' message appears when the product is connected.
Problem
Did you install the driver?
Resolution
y Install the product driver, which is provided with the product, or
download it from the web site. (http://www.lg.com)
y See if the plug&play function is supported by referring to the video
card user manual.
ENG
ENGLISH
No image is displayed
40
TROUBLESHOOTING
'Key Lock On' message appears.
ENGLISH
ENG
Problem
The 'Key Lock On' message
appears when pressing the
Menu button.
Resolution
y The Lock function prevents the OSD settings from being changed
inadvertently. To release the lock, go to Menu and Option and disable
the Key Lock option.
The screen image looks abnormal.
Problem
Resolution
Is the screen position wrong?
y D-Sub analog signal - Press the "AUTO" button in the remote control
to automatically select the optimal screen status that fits into the
current mode. If adjustment is not satisfactory, use the Position OSD
menu.
y See if the video card resolution and frequency are supported by the
product. If the frequency is out of range, set to the recommended
resolution in the Control Panel "Display" Setting menu.
Do thin lines appear on the
background screen?
y D-Sub analog signal - Press the "AUTO" button in the remote control
to automatically select an optimal screen status that fits into the
current mode. If adjustment is not satisfactory, use the Clock OSD
menu.
Horizontal noise appears or the y D-Sub analog signal - Press the "AUTO" button in the remote control
characters look blurred.
to automatically select an optimal screen status that fits into the
current mode. If adjustment is not satisfactory, use the Phase OSD
menu.
The screen is displayed
y The proper input signal is not connected to the signal port. Connect
abnormally.
the signal cable that matches with the source input signal.
After-image appears on the product.
Problem
After-image appears when the
product is turned off.
Resolution
y If you use a fixed image for a long time, the pixels may be damaged
quickly. Use the screen-saver function.
TROUBLESHOOTING
41
The audio function does not work.
Resolution
Sound is too dull.
Sound is too low.
y Adjust the volume.
No sound?
See if the audio cable is connected properly.
Adjust the volume.
See if the sound is set properly.
Select the appropriate equalize sound.
Screen color is abnormal.
Problem
Resolution
Screen has poor color resolution y Set the number of colors to more than 24 bits (true color) Select
(16 colors).
Control Panel - Display - Settings - Color Table menu in Windows.
Screen color is unstable or
mono-colored.
y Check the connection status of the signal cable. Or, re-insert the PC
video card.
Do black spots appear on the
screen?
y Several pixels (red, green, white or black color) may appear on the
screen, which can be attributable to the unique characteristics of the
LCD panel. It is not a malfunction of the LCD.
The operation does not work normally.
Problem
The power suddenly turned off.
Resolution
y Is the sleep timer set?
y Check the power control settings. Power interrupted.
y "CAUTION! FAN STOP!"
If the power is turned off after this message appears, it means that
the fan is out of order.In this case, contact your local service center.
ENG
ENGLISH
Problem
42
SPECIFICATIONS
SPECIFICATIONS
ENGLISH
ENG
LCD Panel
Screen Type
1192.8 mm Wide (46.96 inch) TFT (Thin Film Transistor)
LCD (Liquid Crystal Display) Panel.
Visible diagonal size : 1192.8 mm
0.5415 mm (H) x 0.5415 mm (V)
Pixel Pitch
Video Signal
Max. Resolution
RGB : 1920 X 1080 @ 60 Hz
HDMI/DVI : 1920 X 1080 @ 60 Hz
- It may not be supported depending on the OS or video card type.
Recommended Resolution RGB : 1920 X 1080 @ 60 Hz
HDMI/DVI : 1920 X 1080 @ 60 Hz
- It may not be supported depending on the OS or video card type.
Horizontal Frequency
Vertical Frequency
Synchronization Type
Input Connector
RGB : 30 kHz to 83 kHz
HDMI/DVI : 30 kHz to 83 kHz
RGB : 56 Hz to 75 Hz
HDMI/DVI : 56 Hz to 60 Hz
Separate Sync, Composite Sync, Digital
15-pin D-Sub type, HDMI/DVI (digital), AV(CVBS),
Composite Video, RS-232C, LAN, USB
Power
Rated Voltage
Power Consumption
AC 100-240 V~ 50/60 Hz 3.0 A
On Mode : 260 W Typ.
?`$ {[|}€ |‚ƒ`„ƒ „†‡ˆˆ
 `$ {‰Š\|
Environmental
conditions
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
0 °C to 40 °C
10 % to 80 %
-20 °C to 60 °C
5 % to 95 %
/ Dimensions
(Width x Height x
Depth) / Weight
1079.5 mm x 624.6 mm x 116.3 mm / 21.5 kg
Product specifications shown above may be changed without prior notice due to upgrade of product
functions.
SPECIFICATIONS
43
DTV Mode
RGB (PC) supported mode
Horizontal
Vertical
Frequency(kHz) Frequency(Hz)
Resolution
Component
HDMI/DVI
(DTV)
640 x 350
31.469
70.8
480i
720 x 400
31.468
70.8
576i
640 x 480
31.469
59.94
480p
640 x 480
37.5
75
576p
800 x 600
37.879
60.317
720p
800 x 600
46.875
75
1080i
832 x 624
49.725
74.55
1080p
1024 x 768
48.363
60
1024 x 768
60.123
75.029
1280 x 720
44.772
59.855
1280 x 768
47.7
60
1360 x 768
47.72
59.799
1366 x 768
47.7
60
1280 x 1024
63.981
60.02
1280 x 1024
79.98
75.02
1680 x 1050
65.290
59.954
1920 x 1080
67.5
60
Power Indicator
Mode
Product
On Mode
Sleep Mode
Off Mode
Blue
Amber
NOTE
HDMI/DVI(PC) supported mode
Resolution
Horizontal
Vertical
Frequency(kHz) Frequency(Hz)
640 x 480
31.469
59.94
800 x 600
37.879
60.317
1024 x 768
48.363
60
1280 x 720
44.772
59.855
1280 x 768
47.7
60
1360 x 768
47.72
59.799
1366 x 768
47.7
60
1280 x 1024
63.981
60.02
1680 x 1050
65.290
59.954
1920 x 1080
67.5
60
DTV/PC selection on RGB and HDMI/DVI
y
inputs is available for PC resolutions : 640
x 480 / 60 Hz, 1280 x 720 / 60 Hz, 1920 x
1080 / 60 Hz and DTV resolutions : 480p,
720p, 1080p.
NOTE
Vertical frequency: To enable the user to
y
watch the product display, screen image
should be changed tens of times every
second like a fluorescent lamp. The vertical
frequency or refresh rate is the times of
image display per second. The unit is Hz.
Horizontal frequency: The horizontal interval
y
is the time to display one horizontal line.
When 1 is divided by the horizontal interval,
the number of horizontal lines displayed
every second can be tabulated as the
horizontal frequency. The unit is kHz.
ENG
ENGLISH
Resolution
44
IR CODES
IR CODES
ENGLISH
ENG
This feature is not available for all models.
y
Code (Hexa)
95
08
Function
Energy Saving (ᰚ)
(POWER)
Note
R/C BUTTON
R/C BUTTON (POWER ON/OFF)
0B
INPUT
R/C BUTTON
C4
Monitor On
R/C BUTTON (Discrete IR Code)
C5
Monitor Off
R/C BUTTON (Discrete IR Code)
79
ARC (MARK)
R/C BUTTON (Discrete IR Code)
43
MENU
R/C BUTTON
40
Up (ᰜ)
R/C BUTTON
41
Down (ᰝ)
R/C BUTTON
07
Left (<)
R/C BUTTON
06
Right (>)
R/C BUTTON
44
OK(ᯙ)
R/C BUTTON
28
BACK(ᰙ)
R/C BUTTON
5B
EXIT
R/C BUTTON
4D
PSM
R/C BUTTON
02
(+)
R/C BUTTON
03
(-)
R/C BUTTON
09
MUTE
R/C BUTTON
E0
Brightness ᰜ (Page UP)
R/C BUTTON
E1
Brightness ᰝ (Page Down)
R/C BUTTON
10 to 19
Number Key 0 to 9
R/C BUTTON
72
Red Key
R/C BUTTON
71
Green Key
R/C BUTTON
63
Yellow Key
R/C BUTTON
61
Blue Key
R/C BUTTON
7B
TILE
R/C BUTTON
5A
AV(CVBS)
Discrete IR Code (Input AV Selection)
BF
Component
Discrete IR Code (Input Component Selection)
D5
RGB PC
Discrete IR Code (Input RGB PC Selection)
C6
HDMI/DVI
Discrete IR Code (Input HDMI/DVI Selection)
76
ARC (4:3)
Discrete IR Code (Only 4 : 3 mode)
77
ARC (16:9)
Discrete IR Code (Only 16 : 9 mode)
AF
ARC (ZOOM)
Discrete IR Code
(Only ZOOM, Cinena ZOOM 1 mode)
99
Auto Config.
á°§
R/C BUTTON (Discrete IR Code)
B1
R/C BUTTON
B0
á°Ś
R/C BUTTON
BA
á°¨
R/C BUTTON
8F
á°Ş
R/C BUTTON
8E
á°Š
R/C BUTTON
EXTERNAL CONTROL DEVICE SETUP
45
CONTROLLING THE MULTIPLE PRODUCT
Connecting the cable
Connect the RS-232C cable as shown in the picture.
The RS-232C protocol is used for communication between the PC and product. You can turn the
y
product on/off, select an input source or adjust the OSD menu from your PC.
RS-232C Cable
(not included)
PC
Monitor Set 1
Monitor Set 2
Monitor Set 3
Monitor Set 4
RS-232C Configurations
7-Wire Configurations (Standard RS-232C cable)
PC
RXD
TXD
GND
DTR
DSR
RTS
CTS
D-Sub 9
(Female)
3-Wire Configurations (Not Standard)
Set
PC
TXD
RXD
GND
DSR
DTR
CTS
RTS
D-Sub 9
(Female)
Communication Parameter
Baud Rate : 9600 buad Rate (UART)
y
Data Length : 8 bit
y
Parity Bit : None
y
Stop Bit : 1bit
y
Flow Control : None
y
Communication Code : ASCII code
y
Use a crossed (reverse) cable
y
Set
D-Sub 9
(Female)
D-Sub 9
(Female)
RXD
TXD
GND
DTR
DSR
RTS
CTS
TXD
RXD
GND
DSR
DTR
CTS
RTS
ENG
ENGLISH
Use this method to connect several products to a single PC. You can control several products at a
y
time by connecting them to a single PC.
In the Option menu, Set ID must be between 1 and 99 without being duplicated.
y
46
EXTERNAL CONTROL DEVICE SETUP
Command reference list
ENGLISH
ENG
COMMAND
DATA
01. Power
00H to 01H
02. Input Select
02H to 09H
03. Aspect Ratio
01H to 1FH
04. Screen Mute
00H to 01H
05. Volume Mute
00H to 01H
06. Volume Control
00H to 64H
07. Contrast
00H to 64H
08. Brightness
00H to 64H
09. Color
00H to 64H
10. Tint
00H to 64H
11. Sharpness
00H to 64H
12. OSD Select
00H to 01H
13. Remote Lock/ key Lock
00H to 01H
14. Balance
00H to 64H
15. Color Temperature
00H to 02H
16. Abnomal state
FFH
17. ISM mode
01H to 08H
18. Auto configuration
01H
19. Key
Key Code
20. Tile Mode
00H to 55H
21. Tile H Position
00H to 14H
22. Tile V Position
00H to 14H
23. Tile H Size
00H to 64H
24. Tile V Size
00H to 64H
25. Tile ID Set
00H to 19H
26. Natural Mode (In Tile mode)
00H to 01H
27. Picture mode (PSM)
00H to 06H
28. Sound mode
00H to 05H
29. Fan Fault check
FFH
30. Elapsed time return
FFH
31. Temperature value
FFH
32. Lamp fault check
FFH
33. Auto Volume
00H to 01H
34. Speaker
00H to 01H
35. Time
00H to 06H
00H to 17H
00H to 3BH
36. On Timer (On/Off Timer) Time
F1H to F4H
E0H to E4H
01H to 80H
00H to 17H
00H to 3BH
37. Off Timer (On/Off Timer) Time
F1H to F4H
E0H to E4H
00H to 17H
00H to 3BH
01H to 80H
38. Scheduling input select
F1H to F4H
02H to 09H
EXTERNAL CONTROL DEVICE SETUP
COMMAND
47
DATA
00H to 08H
40. Auto Sleep
00H to 01H
41. Power On Delay
00H to 64H
42. Language
00H to 09H
43. DPM Select
00H to 01H
44. Reset
00H to 02H
45. Power Saving
00H to 03H
46. Power Indicator
00H to 01H
47. Serial no.
FFH
48. S / W Version
FFH
49. Input Select
20H to A0H
Note : During USB operations such as Dvix or EMF, all commands except Power(ka) and Key(mc) are
y
not executed and treated as NG.
ENG
ENGLISH
39. Sleep Time
48
EXTERNAL CONTROL DEVICE SETUP
Transmission / Receiving protocol
ENGLISH
ENG
Transmission
[Command1][Command2][ ][Set ID][ ][Data][Cr]
* [Command 1]: First command. (k, j, m, d, f, x)
* [Command 2]: Second command.(a to u)
* [Set ID]: Set up the Set ID number of product.
range : 01H to 63H. by setting '0', server can control all products.
* In case of operating with more than 2 sets using set ID as '0' at the same time, it should not be checked the ack
message. Because all sets will send the ack message, so it's impossible the check the whole ack messages.
* [DATA]: To transmit command data.
Transmit 'FF' data to read status of command.
* [Cr]: Carriage Return (ASCII code '0 x 0 D')
* [ ]: ASCII code Space (0 x 20)
OK Acknowledgement
[Command2][ ][Set ID][ ][OK][Data][x]
* The Product transmits ACK (acknowledgement) based on this format when receiving normal data. At this time,
if the data is data read mode, it indicates present status data. If the data is data write mode, it returns the data of
the PC computer.
Error Acknowledgement
[Command2][ ][Set ID][ ][NG][Data][x]
* If there is error, it returns NG
EXTERNAL CONTROL DEVICE SETUP
01. Power (Command: k a)
To control Power On/Off of the set.
Data 00 : Power Off
Data 01 : Power On
Acknowledgement
[a][ ][Set ID][ ][OK][Data][x]
To show the status of Power On/Off.
Transmission
[k][a][ ][Set ID][ ][FF][Cr]
Acknowledgement
[a][ ][Set ID][ ][OK][Data][x]
Data 00 : Power Off
Data 01 : Power On
03. Aspect Ratio (Command: k c)
To adjust the screen format.
You can also adjust the screen format using the ARC
(Aspect Ratio Control) button on remote control or in
the Screen menu.
Transmission
[k][c][ ][Set ID][ ][Data][Cr]
Data 01 : Normal Screen (4 : 3)
02 : Wide Scran (16 : 9)
04 : Zoom (AV(CVBS))
06 : Original (AV(CVBS))
07 : 14 : 9 (AV(CVBS))
09 : Just Scan (HD DTV)
* When the RGB, HDMI / DVI PC mode(1:1)
10 to 1F : Cinema Zoom 1 to 16
B : Full Wide
Acknowledgement
[c][ ][Set ID][ ][OK][Data][x]
02. Input Select (Command: k b) (Main Picture Input)
To select input source for the Set.
You can also select an input source using the INPUT
button on the remote control.
Transmission
[k][b][ ][Set ID][ ][Data][Cr]
Data 02 : AV(CVBS)
04 : Component
07 : RGB (PC)
08 : HDMI (DTV)
09 : HDMI (PC)
Acknowledgement
[b][ ][Set ID][ ][OK][Data][x]
Data 02 : AV(CVBS)
04 : Component
07 : RGB (PC)
08 : HDMI (DTV)
09 : HDMI (PC)
04. Screen Mute (Command: k d)
To select screen mute on / off.
Transmission
[k][d][ ][Set ID][ ][Data][Cr]
Data 00 : Screen mute off (Picture on)
01 : Screen mute on (Picture off)
Acknowledgement
[d][ ][Set ID][ ][OK][Data][x]
ENG
ENGLISH
Transmission
[k][a][ ][Set ID][ ][Data][Cr]
49
50
EXTERNAL CONTROL DEVICE SETUP
05. Volume Mute (Command: k e)
To control On/Off of the Volume Mute.
ENGLISH
ENG
Transmission
[k][e][ ][Set ID][ ][Data][Cr]
Data 00 : Volume Mute On (Volume Off)
01 : Volume Mute Off (Volume On)
Acknowledgement
[e][ ][Set ID][ ][OK][Data][x]
Data 00 : Volume Mute On (Volume Off)
01 : Volume Mute Off (Volume On)
08. Brightness (Command: k h)
To adjust screen brightness.
You can also adjust the brightness in the Picture
menu.
Transmission
[k][h][ ][Set ID][ ][Data][Cr]
Data Min : 00H to Max : 64H
(Hexadecimal code)
* Refer to 'Real data mapping ’. See p.50
Acknowledgement
[h][ ][Set ID][ ][OK][Data][x]
* Refer to 'Real data mapping ’. See p.50
06. Volume Control (Command: k f)
To adjust Volume.
Transmission
[k][f][ ][Set ID][ ][Data][Cr]
Data Min : 00H to Max : 64H
(Hexadecimal code)
Acknowledgement
[f][ ][Set ID][ ][OK][Data][x]
Data Min : 00H to Max : 64H
* Real data mapping
0 : STEP 0
A : STEP 10
F : STEP 15
10 : STEP 16
64 : STEP 100
07. Contrast (Command: k g)
To adjust screen contrast.
You can also adjust the contrast in the Picture menu.
Transmission
[k][g][ ][Set ID][ ][Data][Cr]
Data Min : 00H to Max : 64H
Acknowledgement
[g][ ][Set ID][ ][OK][Data][x]
Data Min : 00H to Max : 64H
* Refer to 'Real data mapping ’. See p.50
09. Color (Command: k i) (Video Timing only)
To adjust the screen color.
You can also adjust the color in the Picture menu.
Transmission
[k][i][ ][Set ID][ ][Data][Cr]
Data Min : 00H to Max : 64H
(Hexadecimal code)
* Refer to 'Real data mapping ’. See p.50
Acknowledgement
[i][ ][Set ID][ ][OK][Data][x]
Data Min : 00H to Max : 64H
10. Tint (Command: k j)
To adjust the screen tint.
You can also adjust the tint in the Picture menu.
Transmission
[k][j][ ][Set ID][ ][Data][Cr]
Data Min : 00H to Max : 64H
(Hexadecimal code)
00H : Step R50
64H : Step G50
Acknowledgement
[j][ ][Set ID][ ][OK][Data][x]
Data Min : 00H to Max : 64H
* Tint Real data mapping
0 : Step 0 to Red
64 : Step 100 to Green
EXTERNAL CONTROL DEVICE SETUP
Transmission
[k][k][ ][Set ID][ ][Data][Cr]
Data Min : 00H to Max : 64H
(Hexadecimal code)
* Refer to 'Real data mapping ’. See p.50
14. Balance (Command: k t)
To adjust the sound balance.
Transmission
[k][t][ ][Set ID][ ][Data][Cr]
Data Min : 00H to Max : 64H
(Hexadecimal code)
00H : Step L50
64H : Step R50
Acknowledgement
[k][ ][Set ID][ ][OK][Data][x]
Acknowledgement
[t][ ][Set ID][ ][OK][Data][x]
Data Min : 00H to Max : 64H
Data Min : 00H to Max : 64H
(Hexadecimal code)
00H : Step 0 to L50
64H : Step 100 to R50
* Balance : L50 to R50
12. OSD Select (Command: k l)
To control OSD on/off to the set.
Transmission
[k][l][ ][Set ID][ ][Data][Cr]
Data 00: OSD Off
Transmission
[k][u][ ][Set ID][ ][Data][Cr]
Data 01: OSD On
Acknowledgement
[l][ ][Set ID][ ][OK][Data][x]
Data 00: OSD Off
15. Color Temperature (Command: k u)
To adjust the screen color temperature.
Data 01: OSD On
Data 00 : Medium
01 : Cool
02 : Warm
Acknowledgement
[u][ ][Set ID][ ][OK][Data][x]
Data 00 : Medium
01 : Cool
02 : Warm
13. Remote Lock /Key Lock (Command: k m)
To control Remote Lock on/off to the set.
This function, when controlling RS-232C, locks the
remote control and the local keys.
Transmission
[k][m][ ][Set ID][ ][Data][Cr]
Data 00: Off
Transmission
[k][z][ ][Set ID][ ][Data][Cr]
Data FF : Read
Data 01: On
Acknowledgement
[m][ ][Set ID][ ][OK][Data][x]
Data 00: Off
16. Abnormal state (Command: k z)
Used to Read the power off status when Stand-by
mode.
Data 01: On
Acknowledgement
[z][ ][Set ID][ ][OK][Data][x]
Data 00 : Normal (Power on and signal exist)
01 : No signal (Power on)
02 : Turn the monitor off by remote control
03 : Turn the monitor off by sleep time function
04 : Turn the monitor off by RS-232C function
08 : Turn the monitor off by off time function
09 : Turn the monitor off by auto off function
ENG
ENGLISH
11. Sharpness (Command: k k) (Video input only)
To adjust the screen Sharpness.
You can also adjust the sharpness in the Picture
menu.
51
52
EXTERNAL CONTROL DEVICE SETUP
17. ISM mode (Command: j p)
Used to select the afterimage preventing function.
ENGLISH
ENG
Transmission
[j][p][ ][Set ID][ ][Data][Cr]
Data 01 : Inversion
02 : Orbiter
04 : White Wash
08 : Normal
Acknowledgement
[p][ ][Set ID][ ][OK][Data][x]
20. Tile Mode (Command: d d)
Change a Tile Mode.
Transmission
[d][d][ ][Set ID][ ][Data][Cr]
Data
Description
00 or 11
12
13
14
Tile mode is off.
1 x 2 mode (column x row)
1 x 3 mode
1 x 4 mode
...
1 x 2 mode
...
55
* The data can not be set to 0X or X0 except 00.
Acknowledgement
[d][ ][Set ID][ ][OK/NG][Data][x]
18. Auto Configure (Command: j u)
To adjust picture position and minimize image
shaking.
Automatically. NB : Only applies to RGB(PC) mode.
Transmission
[j][u][ ][Set ID][ ][Data][Cr]
Data 01 : To set
Acknowledgement
[u][ ][Set ID][ ][OK][Data][x]
19. Key (Command: m c)
To send IR remote key code.
Transmission
[m][c][ ][Set ID][ ][Data][Cr]
Data Key code : Refer to ‘IR CODES’. See p.44
Acknowledgement
[c][ ][Set ID][ ][OK][Data][x]
21. Tile H Position (Command: d e)
To set the Horizontal position.
Transmission
[d][e][ ][Set ID][ ][Data][Cr]
Data Min : 00H to Max : 14H
00H : Step -10(Left)
14H : Step 10(Right)
Acknowledgement
[e][ ][Set ID][ ][OK/NG][Data][x]
22. Tile V Position (Command: d f)
To set the Vertical position.
Transmission
[d][f][ ][Set ID][ ][Data][Cr]
Data Min : 00H to Max : 14H
00H : Step -10(Down)
14H : Step 10(Up)
Acknowledgement
[f][ ][Set ID][ ][OK/NG][Data][x]
EXTERNAL CONTROL DEVICE SETUP
23. Tile H Size (Command: d g)
To set the Horizontal size.
Data Min : 00H to Max : 64H
* Refer to 'Real data mapping ’. See p.50
Acknowledgement
[g][ ][Set ID][ ][OK/NG][Data][x]
24. Tile V Size (Command: d h)
To set the Vertical size.
Transmission
[d][h][ ][Set ID][ ][Data][x]
Data Min : 00H to Max : 64H
* Refer to 'Real data mapping ’. See p.50
Acknowledgement
[h][ ][Set ID][ ][OK/NG][Data][x]
26. Natural Mode (Command: d j)
To assign the Tile Natural mode for Tiling function.
ENG
ENGLISH
Transmission
[d][g][ ][Set ID][ ][Data][x]
Transmission
[d][j][ ][Set ID][ ][Data][x]
Data 00 : Natural Off
01 : Natural On
ff : Read Status
Acknowledgement
[j][ ][Set ID][ ][OK/NG][Data][x]
27. Picture Mode (Command: d x)
To adjust the picture mode.
Transmission
[d][x][ ][Set ID][ ][Data][x]
Data Structure
Data(Hex)
Mode
00
01
02
03
04
05
06
Vivid
Standard
Cinema
Sport
Game
Export 1
Export 2
Acknowledgement
[x][ ][Set ID][ ][OK/NG][Data][x]
25. Tile ID Set (Command: d i)
To assign the Tile ID for Tiling function.
Transmission
[d][i][ ][Set ID][ ][Data][x]
Data Min : 00H to Max : 19H
(Hexadecimal code)
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
53
28. Sound Mode (Command: d y)
To adjust the Sound mode.
Transmission
[d][y][ ][Set ID][ ][Data][x]
Data Structure
Data(Hex)
Mode
01
02
03
04
05
Standard
Music
Cinema
Sport
Game
Acknowledgement
[y][ ][Set ID][ ][OK/NG][Data][x]
54
EXTERNAL CONTROL DEVICE SETUP
29. Fan Fault check (Command: d w)
To check the Fan fault of the Set.
ENGLISH
ENG
Transmission
[d][w][ ][Set ID][ ][Data][x]
* The data is always FF (in Hex).
Data ff : Read Status
Acknowledgement
[w][ ][Set ID][ ][OK/NG][Data][x]
* Data is the status value of the Fan fault.
Data 00 : Fan fault
01 : Fan Ok
02 : N/A (Not Avaliable)
30. Elapsed time return (Command: d l)
To read the elapsed time.
Transmission
[d][l][ ][Set ID][ ][Data][x]
* The data is always FF(in Hex).
Acknowledgement
[l][ ][Set ID][ ][OK/NG][Data][x]
32. Lamp fault Check (Command: d p)
To check lamp fault.
Transmission
[d][p][ ][Set ID][ ][Data][x]
* The data is always FF(in Hex).
Acknowledgement
[p][ ][Set ID][ ][OK/NG][Data][x]
* The data is 1 byte long in Hexadecimal.
Data 00 : Lamp Fault
01 : Lamp Ok
02 : N/A (DPM/Power Off)
33. Auto volume (Command: d u)
Automatically adjust the volume level.
Transmission
[d][u][ ][Set ID][ ][Data][x]
Data 00: Off
Data 01: On
Acknowledgement
[u][ ][Set ID][ ][OK/NG][Data][x]
* The data is always FF(in Hex).
(Hexadecimal code)
31. Temperature value (Command: d n)
To read the inside temperature value.
Transmission
[d][n][ ][Set ID][ ][Data][x]
* The data is always FF(in Hex).
Acknowledgement
[n][ ][Set ID][ ][OK/NG][Data][x]
* The data is 1 byte long in Hexadecimal.
34. Speaker (Command: d v)
Turn the speaker on or off.
Transmission
[d][v][ ][Set ID][ ][Data][x]
Data 00: Off
Data 01: On
Acknowledgement
[v][ ][Set ID][ ][OK/NG][Data][x
EXTERNAL CONTROL DEVICE SETUP
35. Time (Command: f a)
Set the current time.
[Data1]
00 : Monday
01 : Tuesday
02 : Wednesday
03 : Thursday
04 : Friday
05 : Saturday
06 : Sunday
[Data2]
0H to 17H (Hours)
[Data3]
00H to 3BH (Minutes)
Acknowledgement
[a][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
*When reading data, FFH is inputted for [Data1],
[Data2] and [Data3]. In other cases, all are treated as
NG.
36. On Timer (On/Off Timer) Time (Command: f d)
Set On Timer.
Transmission
[f][d][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
[Data1]
1. f1h to f4h(read one index)
f1: read 1st index of On Time List
f2: read 2nd index of On Time List
f3: read 3rd index of On Time List
f4: read 4th index of On Time List
2. e1h~e4h(delete one index), e0h(delete all indexes)
e0: delete all indexes of On Time List
e1: delete 1st index of On Time List
e2: delete 2nd index of On Time List
e3: delete 3rd index of On Time List
e4: delete 4th index of On Time List
3. 01h to 80h (write) (Day of Week)
bit0 (01h) : Monday
bit1 (02h) : Tuesday
bit2 (04h) : Wednesday
bit3 (08h) : Thursday
bit4 (10h) : Friday
bit5 (20h) : Saturday
bit6 (40h) : Sunday
bit7 (80h) : Everyday
(1fh) : Monday to Friday
(3fh) : Monday to Saturday
(60h) : Saturday to Sunday
[Data 2]
00h to 17h (Hours)
[Data 3]
00h to 3bh (Minutes)
*When you read/delete the current on time list, all of
[Data2][Data3] are have to be FFH.
(ex1: fd 01 f1 ff ff - when you read 1st index of On
Time List
ex2: fd 01 e1 ff ff - when you delete 1st index of On
Time List
ex3: fd 01 3f 02 03 - when you write one On Time
Data, "Monday to Saturday, 02:03"
Acknowledgement
[d][ ][Set ID][ ][OK][Data1][Data2][Data3][x]
ENG
ENGLISH
Transmission
[f][a][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
55
56
EXTERNAL CONTROL DEVICE SETUP
37. Off Timer (On/Off Timer) Time (Command: f e)
Set Off Timer.
ENGLISH
ENG
Transmission
[f][e][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
[Data 1]
1. f1h to f4h(read one index)
f1: read 1st index of Off Time List,
f2: read 2nd index of Off Time List
f3: read 3rd index of Off Time List
f4: read 4th index of Off Time List
2. e1h to e4h(delete one index), e0h(delete all
indexes)
e0: delete all indexes of Off Time List
e1: delete 1st index of Off Time List
e2: delete 2nd index of Off Time List
e3: delete 3rd index of Off Time List
e4: delete 4th index of Off Time List
3. 01h to 80h (write) (Day of Week)
bit0 (01h) : Monday
bit1 (02h) : Tuesday
bit2 (04h) : Wednesday
bit3 (08h) : Thursday
bit4 (10h) : Friday
bit5 (20h) : Saturday
bit6 (40h) : Sunday
bit7 (80h) : Everyday
(1fh) : Monday to Friday
(3fh) : Monday to Saturday
(60h) : Saturday to Sunday
[Data 2]
00h to 17h (Hours)
[Data 3]
00h to 3bh (Minutes)
*When you read/delete the current on time list, all of
[Data2][Data3] are have to be FFH.
(ex1: fd 01 f1 ff ff - when you read 1st index of Off
Time List
ex2: fd 01 e1 ff ff - when you delete 1st index of Off
Time List
ex3: fd 01 3f 02 03 - when you write one Off Time
Data, "Monday to Saturday, 02:03")
Acknowledgement
[e][ ][Set ID][ ][OK][Data1][Data2][Data3][x]
38. Scheduling Input select (Command: f u) (Main
Picture Input)
To select input source for Set depending on day.
Transmission
[f][u][ ][Set ID][ ][Data1][ ][Data2][Cr]
[Data 1]
1. f1h to f4h(write/read one index)
f1: read 1st index of Scheduling Input
f2: read 2nd index of Scheduling Input
f3: read 3rd index of Scheduling Input
f4: read 4th index of Scheduling Input
[Data 2]
Input
Data(Hex)
Input
02
04
07
08
09
AV(CVBS)
Component
RGB - PC
HDMI/DVI - HD - DVD
HDMI/DVI - PC
*When you read/delete the current Scheduling Input,
[Data2] needs to be FFH.
(ex1: fu 01 f1 ff - when you read 1st index of
Scheduling Input.
ex2: fu 01 f3 02 - when you write one Scheduling
Input Data in to 3rd index, "AV(CVBS)")
Acknowledgement
[u][ ][Set ID][ ][OK][Data1][Data2][x]
EXTERNAL CONTROL DEVICE SETUP
39. Sleep Time (Command: f f)
Set Sleep Time.
Data 00 : Off
01 : 10
02 : 20
03 : 30
04 : 60
05 : 90
06 : 120
07 : 180
08 : 240
Acknowledgement
[f][ ][Set ID][ ][OK/NG][Data][x]
40. Auto Sleep (Command: f g)
Set Auto Sleep.
Transmission
[f][g][ ][Set ID][ ][Data][Cr]
Data 00 : Off
01 : On
Acknowledgement
[g][ ][Set ID][ ][OK/NG][Data][x]
41. Power On Delay (Command: f h)
Set the schedule delay when the power is turned on
(Unit: second).
Transmission
[f][h][ ][Set ID][ ][Data][Cr]
Data : 00H to 64H (Data value)
* Refer to 'Real data mapping ’. See p.50
Acknowledgement
[h][ ][Set ID][ ][OK/NG][Data][x]
42. Language (Command: f i)
Set the OSD language.
Transmission
[f][i][ ][Set ID][ ][Data][Cr]
Data 00 : English
01 : French
02 : German
03 : Spanish
04 : Italian
05 : Portuguese
06 : Chinese
07 : Japanese
08 : Korean
09 : Russian
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
43. DPM Select (Command: f j)
Set the DPM (Display Power Management) function.
Transmission
[f][j][ ][Set ID][ ][Data][Cr]
Data 00 : Off
01 : On
Acknowledgement
[j][ ][Set ID][ ][OK/NG][Data][x]
44. Reset (Command: f k)
Set the DPM (Display Power Management) function.
Transmission
[f][k][ ][Set ID][ ][Data][Cr]
Data 00 : Picture Reset
01 : Screen Reset
02 : Factory Reset
Acknowledgement
[k][ ][Set ID][ ][OK/NG][Data][x]
ENG
ENGLISH
Transmission
[f][f][ ][Set ID][ ][Data][Cr]
57
58
EXTERNAL CONTROL DEVICE SETUP
ENGLISH
ENG
45. Power saving (Command: f l)
To set the Power saving mode.
48. S/W Version (Command: f z)
Check the software version.
Transmission
[f][l][ ][Set ID][ ][Data][Cr]
Transmission
[f][z][ ][Set ID][ ][Data][Cr]
Data 00 : Off
01 : static level 1
02 : static level 2
03 : static level 3
Data FFH : Read
Acknowledgement
[z][ ][Set ID][ ][OK/NG][Data][x]
Acknowledgement
[l][ ][Set ID][ ][OK/NG][Data][x]
46. Power Indicator (Command: f o)
To set the LED for Power Indicator
Transmission
[f][o][ ][Set ID][ ][Data][Cr]
Data 00 : Off
01 : On
Acknowledgement
[o][ ][Set ID][ ][OK/NG][Data][x]
49. Input Select (Command: x b)
To select input source for the Set.
Transmission
[x][b][ ][Set ID][ ][Data][Cr]
Data 20H : AV(CVBS)
40H : Component
60H : RGB(PC)
90H : HDMI/DVI(DTV)
A0H : HDMI/DVI(PC)
Acknowledgement
[b][ ][Set ID][ ][OK/NG][Data][x]
Data 20H : AV(CVBS)
40H : Component
60H : RGB(PC)
90H : HDMI/DVI(DTV)
A0H : HDMI/DVI(PC)
47. Serial no.Check (Command: f y)
Check the Serial no.
Transmission
[f][y][ ][Set ID][ ][Data][Cr]
Data FF (to read the serial numbers)
Acknowledgement
[y][ ][Set ID][ ][OK/NG][Data1] to [Data13][x]
* The data format is ASCII Code.
Make sure to read the Safety Precautions
before using the product.
Keep the Owner's Manual(CD) in an accessible
place for future reference.
The model and serial number of the SET is
located on the back and one side of the SET.
Record it below should you ever need service.
MODEL
SERIAL
Temporary noise is normal when powering ON or
OFF this device.
Regulatory Information cont.
FCC Compliance Statement
respecte toutes les exigences du Règlement sur le
matĂŠriel brouilleur du Canada.
This equipment has been tested and found to comply
within the limits of a Class B digital device pursuant to Part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation.
NOTICE
The regulations are applied only to the products with the
ID LABEL indicating specific requirements.
CE Conformity Notice (for Europe)
This equipment generates, uses, and can radiate radio
frequency energy and if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a particular
installation.
Products with the “CE” Marking comply with the EMC
Directive(89/336/EEC) and LOW VOLTAGE Directive
(73/23/EEC) issued by the Commission of the European
Community.
Compiance with these directives implies conformity to the
following European Norms :
• EN 55022
; Radio Frequency Interference
• EN 55024
; Electromagnetic Immunity
• EN 61000-3-2
; Power Line Harmonics
• EN 61000-3-3
; Voltage Fluctuations
• EN 60950-1
; Product Safety
If this equipment does cause harmful interference to radio
or television reception (which can be determined by
turning the equipment on and off), the user is encouraged
to try to correct the interference by using one or more of
the following measures:
NOTICE
The regulations are applied only to the products with the
ID LABEL indicating specific requirements.
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
the receiver.
Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV
technician for help.
Low Radiation Compliance (MPR II)
This monitor meets one of the strictest guidelines available
today for low radiation emissions, offering the user extra
shielding and an antistatic screen coating. These
guidelines, set forth by a government agency in Sweden,
limit the amount of emission allowed in the Extremely Low
Frequency (ELF) and Very Low Frequency (VLF)
electromagnetic range.
Caution: Changes or modifications not expressly approved
by the party responsible for compliance could void the
user's (or your) authority to operate the equipment. Only
peripherals (digital input/output devices, terminals, printers,
etc.) certified to comply with the Class B limits may be
attached to this monitor. Operation with non-certified
peripherals is likely to result in interference to radio and TV
reception. Only shielded signal cables may be used with
this System.
TCO'99 (TCO'99 applied model only)
NOTICE
The regulations are applied only to the products with the
ID LABEL indicating specific requirements.
Congratulations!
You have just purchased a TCO’99 approved and labelled
product! Your choice has provided you with a product
developed for professional use. Your purchase has also
contributed to reducing the burden on the environment and
also to the further development of environmentally
adapted electronics products.
Canadian DOC Notice
This Class B digital apparatus meets all requirements of
the Canadian Interference-Causing Equipment
Regulations. Cet appareil numĂŠrique de la classe B
01
Regulatory Information cont.
Why do we have environmentally labelled computers?
In many countries, environmental labelling has become an
established method for encouraging the adaptation of
goods and services to the environment. With the growing
manufacture and usage of electronic equipment
throughout the world, there is a recognized concern for the
materials and substances used by electronic products
with regards to their eventual recycling and disposal. By
proper selection of these materials and substances, the
impact on the environment can be minimized.
visual ergonomics.
Below you will find a brief summary of the ecological
requirements met by this product. The complete
ecological criteria document can be found at TCO
Development’s website http://www.tcodevelopment.com
or may be ordered from:
TCO Development
SE-114 94 STOCKHOLM, Sweden
Fax: +46 8 782 92 07
Email : development@tco.se
Information regarding TCO’99 approved and labelled
products may also be obtained at
http://www.tcodevelopment.com
There are also other characteristics of a computer, such as
energy consumption levels, that are important from the
viewpoints of both the work (internal) and natural (external)
environments. Electronic equipment in offices is often left
running continuously, resulting in unnecessary
consumption of large amounts of energy and additional
power generation. From the standpoint of carbon dioxide
emissions alone, it is vital to save energy.
Ecological requirements
Flame retardants
Flame retardants may be present in printed wiring board
laminates, cables, and housings. Their purpose is to
prevent, or at least to delay the spread of fire. Up to 30%
by weight of the plastic in a computer casing can consist of
flame retardant substances. Many flame retardants
contain bromine or chlorine, and these flame retardants
are chemically related to PCBs (polychlorinated
biphenyls). Both the flame retardants containing bromine
or chlorine and the PCBs are suspected of giving rise to
health effects, including reproductive damage in fisheating birds and mammals, due to the bio-accumulative*
processes when not disposed of in accordance with strict
standards for disposal.
What does labelling involve?
The product meets the requirements for the TCO’99
scheme which provides for international and environmental
labelling of personal computers and/or displays.
The labelling scheme was developed as a joint effort by the
TCO (The Swedish Confederation of Professional
Employees), Svenska Naturskyddsforeningen
(The Swedish Society for Nature Conservation) and
Statens Energimyndighet (The Swedish National
Energy Administration).
Approval requirements cover a wide range of issues:
ecology, ergonomics, emission of electrical and magnetical
fields, energy consumption and electrical safety.
TCO’99 requires that plastic components weighing more
than 25 grams shall not contain flame retardants with
organically bound bromine or chlorine. Flame retardants
are allowed in the printed wiring board laminates due to
the lack of commercially available alternatives.
Ecological criteria impose restrictions on the presence and
use of heavy metals, brominated and chlorinated flame
retardants, and other substances. The product must be
prepared for recycling and the manufacturing site(s) shall
be certified according to ISO14001 or EMAS registered.
Cadmium**
Cadmium is present in rechargeable batteries and in the
colour-generating layers of certain computer displays.
TCO’99 requires that batteries, the colour-generating
layers of display screens, and the electrical or electronics
components shall not contain any cadmium.
Energy requirements include a demand that the system
unit and/or display, after a certain period of inactivity,
shall reduce its power consumption to a lower level in one
or more stages. The length of time to reactivate the system
unit shall be reasonable for the user.
Mercury**
Mercury is sometimes found in batteries, relays and
switches. TCO’99 requires that batteries shall not contain
any mercury. It also demands that mercury is not present
in any of the electrical or electronics components
associated with the labelled unit. There is however one
Labelled products must meet strict environmental
demands, for example, in respect of the reduction of
electrical and magnetical fields as well as work load and
02
Regulatory Information cont.
•
exception. Mercury is, for the time being, permitted in the
back light system of flat panel monitors as there today is
no commercially available alternative. TCO aims on
removing this exception when a mercury free alternative is
available.
Noise emissions
Ecology
• The product must be prepared for recycling and the
manufacturer must have a certified environmental
management system such as EMAS or ISO 14 001
• Restrictions on
chlorinated and brominated flame retardants and
polymers
heavy metals such as cadmium, mercury and lead.
Lead**
Lead can be found in picture tubes, display screens,
solders and capacitors. TCO’99 permits the use of lead
due to the lack of commercially available alternatives, but
in future requirements TCO Development aims at
restricting the use of lead.
_____________________________________________
The requirements included in this label have been
developed by TCO Development in co-operation with
scientists, experts, users as well as manufacturers all over
the world. Since the end of the 1980s TCO has been
involved in influencing the development of IT equipment in
a more user-friendly direction. Our labelling system started
with displays in 1992 and is now requested by users and
IT-manufacturers all over the world.
* Bio-accumulative is defined as substances which
accumulate in living organisms.
**Lead, Cadmium and Mercury are heavy metals
which are bio-accumulative.
TCO’03 (TCO’03 applied model only)
For more information, please visit
www.tcodevelopment.com
English
Congratulations!
The display you have just purchased carries the TCO’03
Displays label.
This means that your display is designed,manufactured
and tested according to some of the strictest quality and
environmental requirements in the world. This makes for a
high performance product, designed with the user in focus
that also minimizes the impact on our natural environment.
Some of the features of the TCO’03 Display requirements:
Information for Environmental Preservation
LGE. announced the 'LG Declaration for a Cleaner
Environment' in 1994, and this ideal has served as a
guiding managerial principle ever since. The Declaration is
a foundation that has allowed us to undertake
environmentally friendly activities in careful consideration
of economic, environmental, and social aspects.
We promote activities for environmental preservation, and
we specifically develop our products to embrace the
concept of environment-friendly.
We minimize the hazardous materials contained in our
products. For example, there is no cadmium to be found in
our monitors.
Ergonomics
• Good visual ergonomics and image quality in order to
improve the working environment for the user and to
reduce sight and strain problems. Important
parameters are luminance, contrast, resolution,
reflectance, colour rendition and image stability.
Information for recycling
This monitor may contain parts which could be hazardous
to the environment. It is important that this monitor be
recycled after use.
Energy
• Energy-saving mode after a certain time – beneficial
both for the user and the environment
• Electrical safety
LGE. handles all waste monitors through an
environmentally acceptable recycling method. There are
several take-back and recycling systems currently in
Emissions
• Electromagnetic fields
03
Regulatory Information cont.
operation worldwide. Many parts will be reused and
recycled, while harmful substances and heavy metals are
treated by an environmentally friendly method.
If you want to find out more information about our
recycling program, please contact your local LG vendor or
a corporate representative of LG.
Wir richten unsere Firmenpolitik auf eine sauberere
Umwelt hin aus, indem wir umweltspezifische Aspekte als
wichtigen Punkt in die Weiterentwicklung unseres
Unternehmens einfließen lassen. Zusätzliche
Informationen über unsere ‘grüne’ Firmenpolitik erhalten
Sie auf unserer Website.
http://www.lge.com/about/environment/html/Recycling.jsp
We set our vision and policies on a cleaner world by
selecting the issue of the global environment as a task for
corporate improvement. Please visit our website for more
information about our ‘green’ policies.
http://www.lge.com/about/environment/html/Recycling.jsp
Français
Information sur la protection del’environnement
LGE. a publié sa 'Déclaration en faveur d’un
environnement plus propre' en 1994 et celle-ci est restĂŠe,
depuis lors, un principe directeur de notre entreprise.
Cette dĂŠclaration a servi de base Ă  notre rĂŠflexion et nous
a permis de prendre en compte Ă  la fois les aspects
ĂŠconomiques et sociaux de nos activitĂŠs, tout en
respectant l’environnement.
Deutsch
Informationen zur Erhaltung der Umwelt
Im Jahr 1994 verkĂźndete LGE die 'LG Declaration for a
Cleaner Environment' (LG Erklärung fßr eine sauberere
Umwelt). Seitdem dient dieses Ideal als fĂźhrendes Prinzip
des Unternehmens. Diese Erklärung war die Basis fßr die
DurchfĂźhrung von
umweltfreundlichen Aktivitäten, wobei wirtschaftliche,
umweltbezogene und soziale Aspekte in die
Überlegungen mit einbezogen wurden.
Wir fÜrdern Aktivitäten zum Schutz der Umwelt und die
Entwicklung unserer Produkte ist darauf ausgerichtet,
unserem Konzept bezĂźglich Umweltfreundlichkeit gerecht
zu werden.
Wir sind darauf bedacht, den Anteil der in unseren
Produkten enthaltenen schädlichen Materialien zu
minimieren. So ist in unseren Monitoren beispielsweise
kein Kadmium zu finden.
Nous encourageons les activitĂŠs en faveur de la
préservation de l’environnement et c’est dans cet esprit
que nous dĂŠveloppons nos produits : nous rĂŠduisons au
minimum les matières dangereuses qui entrent dans leur
composition et l’on ne trouve pas de cadmium, par
exemple, dans nos moniteurs.
Information sur le recyclage
Ce moniteur peut contenir des composants qui prĂŠsentent
un risque pour l’environnement. Il est donc important que
celui-ci soit recyclÊ après usage.
LGE. traite les moniteurs en fin de cycle conformĂŠment Ă 
une mĂŠthode de recyclage respectueuse de
l’environnement. Nous reprenons nos produits et les
recyclons dans plusieurs sites rĂŠpartis dans le monde
entier. De nombreux composants sont rĂŠutilisĂŠs et
recyclÊs, et les matières dangereuses, ainsi que les
mĂŠtaux lourds, sont traitĂŠs selon un procĂŠdĂŠ ĂŠcologique.
Si vous souhaitez plus de renseignements sur notre
programme de recyclage, veuillez contacter votre
revendeur LG ou un l’un de nos représentants.
Informationen zum Thema Recycling
Dieser Monitor enthält Teile, die umweltschädlich sein
kĂśnnen. Es ist unbedingt erforderlich, dass der Monitor
recycelt wird, nachdem er außer Dienst gestellt wurde.
Bei LGE. werden alle ausrangierten Monitore in einem
unter umweltbezogenen Aspekten geeigneten Verfahren
recycelt. Augenblicklich sind weltweit mehrere
RĂźcknahme- und Recyclingsysteme im Einsatz. Viele
Teile werden wieder verwendet und recycelt. Schädliche
Substanzen und Schwermetalle werden durch
umweltverträgliche Verfahren behandelt.
Falls Sie mehr Ăźber unser Recyclingprogramm erfahren
mÜchten, wenden Sie sich bitte an Ihren lokalen LGHändler oder einen Unternehmensvertreter von LG.
Nous voulons agir pour un monde plus propre et croyons
au rôle de notre entreprise dans l’amélioration de
l’environnement. Pour plus de renseignements sur notre
politique “verte”, rendez visite à notre site :
http://www.lge.com/about/environment/html/Recycling.jsp
04
Regulatory Information cont.
Italiano
respetan el medio ambiente siempre teniendo en cuenta
aspectos sociales,
econĂłmicos y medioambientales.
Informazioni per la tutela dell’ambiente
La LGE. ha annunciato nel 1994 la cosiddetta 'LG
Declaration for a Cleaner Environment' (Dichiarazione di
LG a favore di un ambiente piĂš pulito), un ideale che da
allora funge da principio ispiratore della gestione
aziendale. La dichiarazione rappresenta il fondamento che
consente di intraprendere attivitĂ  a favore dell'ambiente
tenendo conto degli aspetti economici, ambientali e
sociali.Noi della LG, promuoviamo attivitĂ  a favore della
tutela dell'ambiente sviluppando appositamente i nostri
prodotti per cogliere il concetto del rispetto dell’ambiente
riducendo i materiali dannosi presenti nei nostri prodotti.
Ad esempio nei nostri monitor non è presente il cadmio.
Promocionamos actividades orientadas a la conservaciĂłn
del medio ambiente y desarrollamos nuestros productos
especĂ­ficamente para que se ajusten a la filosofĂ­a que
protege el entorno.
Reducimos al mĂĄximo el uso de materiales de riesgo en
nuestros productos. Un ejemplo de ello es la ausencia
total de cadmio en nuestros monitores.
InformaciĂłn para el reciclaje
Este monitor puede contener piezas que entraĂąen riesgos
medioambientales. Es importante reciclar este monitor
despuĂŠs de su utilizaciĂłn.
LGE. trata todos los monitores usados siguiendo un
mĂŠtodo de reciclaje que no daĂąa al entorno. Contamos
con diversos sistemas de recuperaciĂłn y reciclaje que
funcionan a nivel mundial en la actualidad. Es posible
reciclar y reutilizar muchas de las piezas, mientras que las
sustancias daĂąinas y los metales pesados se tratan
siguiendo un mĂŠtodo que no perjudique al medio
ambiente. Si desea obtener mĂĄs informaciĂłn acerca del
programa de reciclaje, pĂłngase en contacto con su
proveedor local de LG o con un representante empresarial
de nuestra marca.
Informazioni per il riciclaggio
Il monitor può presentare componenti che potrebbero
risultare eventualmente dannosi per l'ambiente. È
importante che il monitor sia riciclato al termine del suo
utilizzo.
La LGE. gestisce tutti i monitor di rifiuto con un metodo di
riciclaggio soddisfacente dal punto di vista ambientale. In
tutto il mondo sono attualmente in funzione numerosi
sistemi di riciclaggio e recupero. I diversi componenti sono
riutilizzati e riciclati, mentre le sostanze dannose e i metalli
pesanti vengono trattati con un metodo rispettoso
dell’ambiente.
Se si desiderano maggiori informazioni in merito al
programma di riciclaggio, è consigliabile rivolgersi al
proprio rivenditore LG o ad un rappresentante aziendale
della LG.
Basamos nuestra visiĂłn y nuestras polĂ­ticas en un mundo
mĂĄs limpio y para ellos optamos por un entorno global
como tarea principal de nuestra evoluciĂłn como empresa.
Visite nuestra pĂĄgina Web para obtener mĂĄs informaciĂłn
sobre nuestras polĂ­ticas ecolĂłgicas.
http://www.lge.com/about/environment/html/Recycling.jsp
Noi della LG impostiamo la nostra visione e le nostre
politiche a favore di un mondo piĂš pulito ponendo la
questione dell'ambiente dal punto di vista globale come
una mansione rivolta al miglioramento della nostra
azienda. Vi invitiamo a visitare il nostro sito internet per
ulteriori informazioni sulla nostra politica “verde”.
http://www.lge.com/about/environment/html/Recycling.jsp
PortuguĂŞs
Informaçþes relacionadas à preservação
ambiental
A LGE. anunciou a 'LG Declaration for a Cleaner
Environment' (Declaração da LG para um ambiente mais
limpo) em 1994 e esse ideal tem servido desde entĂŁo
como um princípio administrativo de orientação. A
Declaração Ê a base que nos tem permitido realizar
atividades favoråveis ao ambiente com consideração
atenta aos aspectos econĂ´micos, ambientais e sociais.
EspanĂľl
InformaciĂłn para la conservaciĂłn
medioambiental
LGE. presentĂł la 'DeclaraciĂłn para un entorno mĂĄs limpio
de LG' en 1994 y este ideal ha servido para guiar nuestros
principios empresariales desde entonces. La DeclaraciĂłn
es la base que nos ha permitido llevar a cabo tareas que
Promovemos atividades de preservação ambiental e
desenvolvemos nossos produtos para englobar
05
Regulatory Information cont.
especificamente o conceito de favorĂĄvel ao ambiente.
Reduzimos os materiais perigosos contidos em nossos
produtos. Por exemplo, nĂŁo hĂĄ cĂĄdmio em nossos
monitores.
Informatie met betrekking tot recycling
Deze monitor bevat materialen die schadelijk zouden
kunnen zijn voor het milieu. Het is belangrijk dat deze
monitor aan het einde van zijn levensduur wordt
gerecycled.
Informaçþes relacionadas à reciclagem
Este monitor pode conter peças que podem representar
riscos ao ambiente. É importante que ele seja reciclado
apĂłs o uso.
LGE. verwerkt alle afvalmonitors via een milieuvriendelijke
recyclingmethode. Hiervoor worden er momenteel
wereldwijd verscheidene inname- en recyclingsystemen
gehanteerd. Een groot aantal onderdelen wordt opnieuw
gebruikt en gerecycled, waarbij schadelijke stoffen en
zware metalen volgens een milieuvriendelijke methode
worden verwerkt.
Voor meer informatie over ons recyclingprogramma kunt u
contact opnemen met uw plaatselijke LGvertegenwoordiger of een LG-vestiging.
A LGE. cuida de todos os monitores descartados atravĂŠs
de um mĂŠtodo de reciclagem agradĂĄvel ao ambiente. HĂĄ
vårios sistemas de devolução e reciclagem atualmente
em operação no mundo. Muitas peças serão reutilizadas
e recicladas e as substâncias nocivas e os metais
pesados passarĂŁo por tratamento atravĂŠs de um mĂŠtodo
favorĂĄvel ao ambiente.
Para obter mais informaçþes sobre nosso programa de
reciclagem, entre em contato com seu fornecedor LG
local ou com um representante corporativo da LG.
Definimos nossa visĂŁo e nossas polĂ­ticas relacionadas a
um mundo mais limpo selecionando a questĂŁo do
ambiente global como uma tarefa de aprimoramento
corporativo. Visite nosso site para obter mais informaçþes
sobre nossas polĂ­ticas de meio ambiente.
http://www.lge.com/about/environment/html/Recycling.jsp
Onze visie en ons beleid met betrekking tot een schonere
wereld vloeien voort uit het feit dat wij het milieu hebben
aangemerkt als een onderwerp dat speciale aandacht
verdient binnen onze onderneming. Bezoek onze website
voor meer informatie over ons 'groene' beleid.
http://www.lge.com/about/environment/html/Recycling.jsp
Russian
»ÌÙÓχˆËˇ ÔÓ Óı‡Ì ÓÍÛʇ˛˘ÂÈ Ò‰˚
Nederlands
¬ 1994 „Ó‰Û ÍÓÔÓ‡ˆËˇ LGE ÓÔÛ·ÎËÍÓ‚‡Î‡
'ƒÂÍ·‡ˆË˛ LG ÔÓ Óı‡Ì ÓÍÛʇ˛˘ÂÈ Ò‰˚',
ÍÓÚÓ‡ˇ Ò ÚÂı ÔÓ ÒÎÛÊËÚ ÓÒÌÓ‚Ì˚Ï ÔË̈ËÔÓÏ
ÛÔ‡‚ÎÂÌˡ. Õ‡ ÓÒÌÓ‚Â ˝ÚÓÈ ‰ÂÍ·‡ˆËË Ï˚ ÒÏÓ„ÎË
Ô‰ÔËÌˇÚ¸ ‰ÂÈÒڂˡ, Ó·ÂÒÔ˜˂‡˛˘ËÂ
·ÂÁÓÔ‡ÒÌÓÒÚ¸ ÓÍÛʇ˛˘ÂÈ Ò‰˚, Û‰ÂΡˇ ÔË ˝ÚÓÏ
‰ÓÎÊÌÓ ‚ÌËχÌË ˝ÍÓÌÓÏ˘ÂÒÍËÏ, ˝ÍÓÎӄ˘ÂÒÍËÏ Ë
ÒӈˇθÌ˚Ï ‡ÒÔÂÍÚ‡Ï.
Informatie met betrekking tot het behoud van
het milieu
LGE. publiceerde in 1994 de 'LG Declaration for a Cleaner
Environment' (de LG-verklaring met betrekking tot een
schoner milieu). Deze verklaring en het ideaal van een
schoner milieu fungeren sindsdien als een bestuurlijke
leidraad voor onze onderneming. Op basis van deze
verklaring ontplooien wij milieuvriendelijke activiteiten,
waarbij er zowel met sociale en economische aspecten,
als met milieuaspecten zorgvuldig rekening wordt
gehouden.
Ã˚ ÒÚËÏÛÎËÛÂÏ ‰ÂˇÚÂθÌÓÒÚ¸ ÔÓ Óı‡ÌÂ
ÓÍÛʇ˛˘ÂÈ Ò‰˚, Û‰ÂΡˇ ÓÒÓ·Ó ‚ÌËχÌËÂ
‡Á‡·ÓÚÍ ̇¯ÂÈ ÔÓ‰Û͈ËË ‚ ÒÓÓÚ‚ÂÚÒÚ‚ËË Ò
ÍÓ̈ÂÔˆËÂÈ ˝ÍÓÎӄ˘ÂÒÍÓÈ ·ÂÁÓÔ‡ÒÌÓÒÚË.
Ã˚ Ò‚Ó‰ËÏ Í ÏËÌËÏÛÏÛ ÒÓ‰ÂʇÌË ÓÔ‡ÒÌ˚ı
‚¢ÂÒÚ‚ ‚ ̇¯ÂÈ ÔÓ‰Û͈ËË. Õ‡ÔËÏÂ, ‚ ̇¯Ëı
ÏÓÌËÚÓ‡ı ‚˚ Ì ̇ȉÂÚ ͇‰Ïˡ.
Wij ondersteunen activiteiten die zijn gericht op het
behoud van het milieu en wij houden bij het ontwikkelen
onze producten specifiek rekening met de
milieuvriendelijkheid van onze producten.
Wij minimaliseren het gebruik van schadelijke stoffen in
onze producten. Er wordt bijvoorbeeld geen cadmium
verwerkt in onze monitors.
»ÌÙÓχˆËˇ ÔÓ ÛÚËÎËÁ‡ˆËË ÓÚıÓ‰Ó‚
›ÚÓÚ ÏÓÌËÚÓ ÏÓÊÂÚ ÒÓ‰Âʇڸ ÍÓÏÔÓÌÂÌÚ˚,
ÍÓÚÓ˚ ÏÓ„ÛÚ Ì‡ÌÂÒÚË Û˘Â· ÓÍÛʇ˛˘ÂÈ Ò‰Â.
06
Regulatory Information cont.
ÕÂÓ·ıÓ‰ËÏÓ ÛÚËÎËÁËÓ‚‡Ú¸ ÏÓÌËÚÓ ÔÓÒÎÂ
ËÒÔÓθÁÓ‚‡Ìˡ.
KÓÔÓ‡ˆËˇ LGE ÔÂÂ‡·‡Ú˚‚‡ÂÚ ‚Ò ·‡ÍÓ‚‡ÌÌ˚Â
ÏÓÌËÚÓ˚ Ò ÔÓÏÓ˘¸˛ ˝ÍÓÎӄ˘ÂÒÍË ÔËÂÏÎÂÏÓ„Ó
ÏÂÚÓ‰‡ ÛÚËÎËÁ‡ˆËË ÓÚıÓ‰Ó‚. œÓ ‚ÒÂÏÛ ÏËÛ
‰ÂÈÒÚ‚Û˛Ú ÒËÒÚÂÏ˚ ÛÚËÎËÁ‡ˆËË ÓÚıÓ‰Ó‚ Ë ‚ÓÁ‚‡Ú‡
ËÒÔÓθÁÓ‚‡ÌÌÓÈ ÔÓ‰Û͈ËË. ÃÌÓ„Ë ÍÓÏÔÓÌÂÌÚ˚
·Û‰ÛÚ ‚ÚÓ˘ÌÓ ËÒÔÓθÁÓ‚‡Ì˚ Ë ÛÚËÎËÁËÓ‚‡Ì˚, ‚ ÚÓ
‚ÂÏˇ Í‡Í ‚‰Ì˚ ‚¢ÂÒÚ‚‡ Ë ÚˇÊÂÎ˚ ÏÂÚ‡ÎÎ˚
·Û‰ÛÚ Ó·‡·ÓÚ‡Ì˚ Ò ÔÓÏÓ˘¸˛ ˝ÍÓÎӄ˘ÂÒÍË
ÔËÂÏÎÂÏÓ„Ó ÏÂÚÓ‰‡.
«‡ ·ÓΠÔÓ‰Ó·ÌÓÈ ËÌÙÓχˆËÂÈ ÔÓ Ì‡¯ÂÈ
ÔÓ„‡ÏÏ ÛÚËÎËÁ‡ˆËË ÓÚıÓ‰Ó‚ Ó·‡˘‡ÈÚÂÒ¸ Í
ÏÂÒÚÌÓÏÛ ÔÓÒÚ‡‚˘ËÍÛ ËÎË Ô‰ÒÚ‡‚ËÚÂβ
ÍÓÔÓ‡ˆËË LG.
Ã˚ ÓËÂÌÚËÛÂÏÒˇ ̇ Ó·ÂÒÔ˜ÂÌË ˝ÍÓÎӄ˘ÂÒÍÓÈ
·ÂÁÓÔ‡ÒÌÓÒÚË, ÒÚ‡‚ˇ Ò· ˆÂθ˛ „ÎÓ·‡Î¸ÌÛ˛ Á‡˘ËÚÛ
ÓÍÛʇ˛˘ÂÈ Ò‰˚. ƒÓÔÓÎÌËÚÂθÌÛ˛ ËÌÙÓχˆË˛
Ó Ì‡¯ÂÈ ÔÓÎËÚËÍ ÔÓ Óı‡Ì ÓÍÛʇ˛˘ÂÈ Ò‰˚ ‚˚
ÏÓÊÂÚ ̇ÈÚË Ì‡ ̇¯ÂÏ Ò‡ÈÚÂ:
http://www.lge.com/about/environment/html/Recycling.jsp
EPA (EPA applied model only)
ENERGY STAR is a set of power-saving guidelines
issued by the U.S. Environmental Protection
Agency(EPA).
As an ENERGY STAR Partner LGE U. S.
A.,Inc. has determined that this product
meets the ENERGY STAR guidelines for
energy efficiency.
NOM MARK (Mexico only)
07
Regulatory Information cont.
WEEE
un bidone della spazzatura barrato da una croce
significa che il prodotto è coperto dalla direttiva
europea 2002/96/EC.
2.Tutti i prodotti elettrici ed elettronici dovrebbero
essere smaltiti separatamente rispetto alla
raccolta differenziata municipale, mediante
impianti di raccolta specifici designati dal
governo o dalle autoritĂ  locali.
3.Il corretto smaltimento delle apparecchiature
obsolete contribuisce a prevenire possibili
conseguenze negative sulla salute umana e
sull'ambiente.
4.Per informazioni piĂš dettagliate sullo smaltimento
delle apparecchiature obsolete, contattare il
comune, il servizio di smaltimento rifiuti o il
negozio in cui è stato acquistato il prodotto.
(for Europe )
English
Disposal of your old appliance
1.When this crossed-out wheeled bin symbol is attached
to a product it means the product is covered by the
European Directive 2002/96/EC.
2.All electrical and electronic products should be
disposed of separately from the municipal waste
stream via designated collection facilities appointed by
the government or the local authorities.
3.The correct disposal of your old appliance will help
prevent potential negative consequences for the
environment and human health.
4.For more detailed information about disposal of your
old appliance, please contact your city office, waste
disposal service or the shop where you purchased the
product.
Swedish
Kassering av din gamla apparat
1.När den här symbolen med en Üverkryssad
soptunna pü hjul sitter pü en produkt innebär det
att den regleras av European Directive
2002/96/EC.
2.Alla elektriska och elektroniska produkter bĂśr
kasseras via andra vägar än de som finns fÜr
hushüllsavfall, helst via fÜr ändamület avsedda
uppsamlingsanläggningar som myndigheterna
utser.
3.Om du kasserar din gamla apparat pü rätt sätt
sĂĽ bidrar du till att fĂśrhindra negativa
konsekvenser fÜr miljÜn och människors hälsa.
4.Mer detaljerad information om kassering av din
gamla apparat kan fĂĽr av kommunen,
renhüllningsverket eller den butik där du kÜpte
produkten.
French
Élimination de votre ancien appareil
1.Ce symbole, reprĂŠsentant une poubelle sur
roulettes barrĂŠe d'une croix, signifie que le
produit est couvert par la directive europĂŠenne
2002/96/EC.
2.Les ĂŠlĂŠments ĂŠlectriques et ĂŠlectroniques
doivent ĂŞtre jetĂŠs sĂŠparĂŠment, dans les videordures prĂŠvus Ă  cet effet par votre municipalitĂŠ.
3.Une ĂŠlimination conforme aux instructions aidera
Ă  rĂŠduire les consĂŠquences nĂŠgatives et risques
ĂŠventuels pour l'environnement et la santĂŠ
humaine.
4.Pour plus d'information concernant l'ĂŠlimination
de votre ancien appareil, veuillez contacter votre
mairie, le service des ordures mÊnagères ou
encore la magasin oĂš vous avez achetĂŠ ce
produit.
Dutch
Uw oude toestel wegdoen
1.Als het symbool met de doorgekruiste verrijdbare
afvalbak op een product staat, betekent dit dat
het product valt onder de Europese Richtlijn
2002/96/EC.
2.Elektrische en elektronische producten mogen
niet worden meegegeven met het huishoudelijk
afval, maar moeten worden ingeleverd bij
speciale inzamelingspunten die door de lokale of
landelijke overheid zijn aangewezen.
3.De correcte verwijdering van uw oude toestel
helpt negatieve gevolgen voor het milieu en de
menselijke gezondheid voorkomen.
Italian
Smaltimento delle apparecchiature obsolete
1.Quando su un prodotto è riportato il simbolo di
08
Regulatory Information cont.
4.Wilt u meer informatie over de verwijdering van
uw oude toestel? Neem dan contact op met uw
gemeente, de afvalophaaldienst of de winkel
waar u het product hebt gekocht.
eller de lokale myndigheder.
3.Korrekt bortskaffelse af dit gamle apparat er med
til at forhindre mulige skadevirkninger pü miljøet
og menneskelig sundhed.
4.Mere detaljerede oplysninger om bortskaffelse af
dit gamle apparat kan fĂĽs ved at kontakte dit
lokale kommunekontor, renovationsselskab eller
den butik, hvor du købte produktet.
Finnish
Vanhojen laitteiden hävittäminen
1.Tämä merkki tuotteessa tarkoittaa, että tuote
kuuluu sähkÜ- ja elektroniikkalaiteromusta
annetun EU-direktiivin 2002/96/EY
soveltamisalaan.
2.Kaikki elektroniset laitteet ovat ongelmajätettä,
joten ne on toimitettava paikalliseen
keräyspisteeseen.
3.Vanhan laitteen asianmukainen hävittäminen
ehkäisee mahdollisia ympäristÜÜn ja
terveyteen kohdistuvia haittavaikutuksia.
4.Lisätietoa vanhan laitteen hävittämisestä saat
ottamalla yhteyden paikallisiin viranomaisiin,
kierrätyskeskukseen tai myymälään, josta ostit
laitteen.
Greek
∞fiÚÚÈ„Ë Ù˘ ·ÏÈ¿˜ Û·˜ Û˘Û΢‹˜
1.ŸÙ·Ó ¤Ó· ÚÔ˚fiÓ ‰È·ı¤ÙÂÈ ÙÔ ‰‡Ì‚ÔÏÔ ÂÓfi˜
‰È·ÁÚ·Ì̤ÓÔ˘ οϷıÔ˘ ·ÔÚÚÈÌÌ¿ÙˆÓ, ÙfiÙ ÙÔ ÚÔ˚fiÓ
ηχÙÂÙ·È ·fi ÙËÓ E˘Úˆ·˚΋ O‰ËÁ›· 2002/96/EOK.
2.H ·fiÚÚÈ„Ë fiÏˆÓ ÙˆÓ ËÏÂÎÙÚÈÎÒÓ Î·È ËÏÂÎÙÚÔÓÈÎÒÓ
ÚÔ˚fiÓÙˆÓ Ú¤ÂÈ Ó· Á›ÓÂÙ·È ¯ˆÚÈÛÙ¿ ·fi Ù· ÁÂÓÈο
ÔÈÎȷο ·ÔÚÚ›ÌÌ·Ù· ̤ۈ ηıÔÚÈṲ̂ӈÓ
ÂÁηٷÛÙ¿ÛÂˆÓ Û˘ÏÏÔÁ‹˜ ·ÔÚÚÈÌÌ¿ÙˆÓ, ÔÈ Ôԛ˜
¤¯Ô˘Ó ‰ËÌÈÔ˘ÚÁËı› ›Ù ·fi ÙËÓ Î˘‚¤ÚÓËÛË ‹ ·fi ÙȘ
ÙÔÈΤ˜ ·Ú¯¤˜.
3.H ÛˆÛÙ‹ ·fiÚÚÈ„Ë Ù˘ ·ÏÈ¿˜ Û·˜ Û˘Û΢‹˜ ı·
‚ÔËı‹ÛÂÈ ÛÙËÓ ·ÔÙÚÔ‹ Èı·ÓÒÓ ·ÚÓËÙÈÎÒÓ Û˘ÓÂÈÒÓ
ˆ˜ ÚÔ˜ ÙÔ ÂÚÈ‚¿ÏÏÔÓ Î·È ÙËÓ ˘Á›· ÙÔ˘ ·ÓıÚÒÔ˘.
4.°È· ÈÔ ÏÂÙÔÌÂÚ›˜ ÏËÚÔÊÔڛ˜ Û¯ÂÙÈο Ì ÙËÓ
·fiÚÚÈ„Ë Ù˘ ·ÏÈ¿˜ Û·˜ Û˘Û΢‹˜, ÂÈÎÔÈÓˆÓ‹ÛÙ ÌÂ
ÙÔ ·ÚÌfi‰›Ô ÙÔÈÎfi ÁÚ·Ê›Ô, ˘ËÚÂÛ›· ‰È¿ıÂÛ˘ ÔÈÎÈ·ÎÒÓ
·ÔÚÚÈÌÌ¿ÙˆÓ ‹ ÙÔ Ì·Á·Í› ·fi ÙÔ ÔÔ›Ô ·ÁÔÚ¿Û·ÙÂ ÙÔ
ÚÔ˚fiÓ.
German
Entsorgung von Altgeräten
1.Wenn dieses Symbol eines durchgestrichenen
Abfalleimers auf einem Produkt angebracht ist,
unterliegt dieses Produkt der europäischen
Richtlinie 2002/96/EC.
2.Alle Elektro- und Elektronik-Altgeräte mßssen
getrennt vom HausmĂźll Ăźber dafĂźr staatlich
vorgesehenen Stellen entsorgt werden.
3.Mit der ordnungsgemäßen Entsorgung des alten
Geräts vermeiden Sie Umweltschäden und eine
Gefährdung der persÜnlichen Gesundheit.
4.Weitere Informationen zur Entsorgung des alten
Geräts erhalten Sie bei der Stadtverwaltung,
beim Entsorgungsamt oder in dem Geschäft, wo
Sie das Produkt erworben haben.
Spanish
CĂłmo deshacerse de aparatos elĂŠctricos y
electrĂłnicos viejos
1.Si en un producto aparece el sĂ­mbolo de un contenedor
de basura tachado, significa que ĂŠste se acoge a la
Directiva 2002/96/CE.
2.Todos los aparatos elĂŠctricos o electrĂłnicos se deben
desechar de forma distinta del servicio municipal de
recogida de basura, a travĂŠs de puntos de recogida
designados por el gobierno o las autoridades locales.
3.La correcta recogida y tratamiento de los dispositivos
inservibles contribuye a evitar riesgos potenciales para el
medio ambiente y la salud pĂşblica.
4.Para obtener mĂĄs informaciĂłn sobre cĂłmo deshacerse de
sus aparatos elĂŠctricos y electrĂłnicos viejos, pĂłngase en
contacto con su ayuntamiento, el servicio de recogida de
basuras o el establecimiento donde adquiriĂł el producto.
Danish
SĂĽdan smider du dit gamle apparat ud
1.NĂĽr der er et tegn med et kryds over en
skraldespand, betyder det, at produktet er
omfattet af EU-direktiv 2002/96/EC.
2.Alle elektriske og elektroniske produkter skal
smides ud et andet sted end gennem den
kommunale affaldsordning ved hjĂŚlp af specielle
indsamlingsfaciliteter, der er organiseret af staten
09
Regulatory Information cont.
Portuguese
Hungarian
Slovak
Polish
Czech
Croatian
10
Regulatory Information cont.
Estonian
Latvian
Lithuanian
11

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Language                        : ko-KR
Tagged PDF                      : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Format                          : application/pdf
Creator                         : 최선미
Title                           : EMISSION TEST REPORT
Create Date                     : 2011:10:27 18:13:31Z
Creator Tool                    : Microsoft® Office Word 2007
Modify Date                     : 2011:10:27 18:20:51+09:00
Metadata Date                   : 2011:10:27 18:20:51+09:00
Producer                        : Microsoft® Office Word 2007
Document ID                     : uuid:0ac25d77-08c5-4d88-855b-4185f50874cd
Instance ID                     : uuid:7fd53d34-6594-41f7-bfb9-e6836162b470
Page Count                      : 71
Author                          : 최선미

EXIF Metadata provided by EXIF.tools