LG Electronics USA 50PC3DUD Plasma Display Panel User Manual 527A

Download:
Mirror Download [FCC.gov]
Document ID	609274
Application ID	E7IRah1wci1kt/BfLrOjBQ==
Document Description	Users Manual Part 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	220.24kB (2752994 bits)
Date Submitted	2005-12-06 00:00:00
Date Available	2005-12-06 00:00:00
Creation Date	2005-12-05 22:32:06
Producing Software	Acrobat Distiller 4.0.5 for Macintosh
Document Lastmod	2005-12-05 22:32:16
Document Title	527A
Document Creator	3.3: LaserWriter 8 8.7.1
Document Author:	sun

Introduction
Brief Info.
What is Brief Info?
TV
INPUT
: Brief Info shows the present screen information.
: On Watching with the upper Input signal, press the INFO
button.
POWER
DVD
VCR
How to use?
CABLE
STB
1. Press the INFO button to show the Brief Info on the screen.
2. Press the INFO button or EXIT button to exit.
- The INFO button does not work in Component1,
Component2, RGB, and HDMI/DVI modes.
GUIDE
RATIO
TV
AUDIO
MODE
DAY -
MENU
DAY+
This function works in the following mode:
• Watching TV/DTV/CATV/CADTV
• Watching Video, Front Video
ENTER
Banner information
Program start time
Program progress bar
Program title
EXIT
FFO
CC ININ
TIMER
PAGE
VOL
FAV
MUTE
Program finish time
Day of week
Month, Year
CH
Present time
Brief Info Title Test Brief Info Title Test Brief Inf..
SAT, Jan 20, 2005
10:40AM
6:55AM
7:00PM
DTV 2-1
Dolby Digital HD
PAGE
Multilingual
FLASHBK
EZ PIC EZ SOUND
ADJUST
SAP
CC
Caption
4:3
1080i
TV-PG D L S V
ABCDEFGHIJ...
FREEZE
APM
4:3
16 : 9
480i
480p
720p
1080i
The original aspect ratio of the video is 4:3
The original aspect ratio of the video is 16:9 (wide)
The
The
The
The
video
video
video
video
resolution
resolution
resolution
resolution
is
is
is
is
720x480i
720x480p
1280x720p
1920x1080i
Multilingual: The program contains two or more audio
services. Press the SAP button to select wanted Audio.
CC
Caption: The program contains one or more caption services. Press the CC button to select wanted Closed caption.
V-Chip: The program contains V-Chip information. Refer
to the LOCK menu: D (Dialogue), L (Language), S (Sex), V
(Violence), FV (Fantasy Violence)
15
Introduction
INPUT
TV
POWER
TV
AUDIO
DAY -
MENU
DVD
EPG (Electronic Program Guide)
(In DTV mode)
VCR
MODE
CABLE
STB
GUIDE
GUIDE
DAY+
- This system has an Electronic Program Guide (EPG) to help
your navigate through all the possible viewing options.
- The EPG supplies information such as program listings, start
and end times for all available services.
- This function can be used only when the EPG information is
broadcasted by broadcasting companies.
- The EPG displays the program description for next 7 days.
- This function is only supported in DTV mode.
RATIO
ENTER
EXIT
TIMER
CC
INFO
PAGE
VOL
FAV
MUTE
CH
PAGE
FLASHBK
Press the GUIDE button to switch on EPG.
Press the D / E / F / G button to select desired program, then
press the ENTER button to display the selected program.
Press the GUIDE or EXIT button again to switch off EPG and
return to TV viewing.
Remote Control Buttons
FF
GG
IFF / GGI
GUIDE/EXIT
Function
Select the desired program
Change to the selected channel
Jump Page
Change the date
Switch off EPG
Installing Batteries
Open the battery compartment
cover on the back side.
INPUT
TV
POWER
TV
16
Insert two batteries in correct
polarity (+ with +, - with -). Don’t
mix old or used batteries with new
ones.
AUDIO
VCR
STB
GUIDE
RATIO
POWER
TV
AUDIO
MENU
INPUT
TV
DVD
MODE
CABLE
DAY -
DVD
VCR
MODE
CABLE
STB
GUIDE
RATIO
DAY+
DAY -
MENU
DAY+
ENTER
ENTER
EXIT
TIMER
CC
INFO
PAGE
VOL
MUTE
FAV
EXIT
TIMER
CC
INFO
CH
PAGE
PAGE
VOL
MUTE
FAV
CH
PAGE
* Use a remote control 7 meter distance
and 30 degree (left/right) within the
receiving unit scope.
Close the cover.
* Dispose of used batteries in a recycle
bin to prevent environment.
Installation
Installation
• The TV can be installed in various ways such as on a wall, or on a desktop etc.
• The TV is designed to be mounted horizontally.
GROUNDING
Power
Supply
Ensure that you connect the earth ground wire to prevent possible electric shock. If grounding methods are not possible,
have a qualified electrician install a separate circuit breaker.
Do not try to ground the unit by connecting it to telephone
wires, lightening rods, or gas pipes.
Short-circuit
Breaker
Desktop Pedestal Installation
For proper ventilation, allow a clearance of 4" on each side and from the wall.
4 inches
4 inches
4 inches
4 inches
4 inches
4 inches
4 inches
4 inches
17
Installation
Installation
Basic Connection (For 32/37/42LC2D)
Hold the CABLE MANAGEMENT with both hands and
pull it upward.
Connect the cables as necessary.
After connecting the cables neatly, arrange the cables to the
Cable Holder.
To connect an additional equipment, see the External equipment Connections section.
32LC2D
Reinstall the CABLE MANAGEMENT as shown.
32LC2D
37/42LC2D
Bundle the cables using the supplied twister holder.
32LC2D
18
37/42LC2D
37/42LC2D
Installation
Basic Connection(For 42/50PC3D, 42PC3DV)
Hold the CABLE MANAGEMENT with both hands and pull it upward.
Connect the cables as necessary.
After connecting the cables neatly, arrange the cables to the Cable Holder.
To connect an additional equipment, see the External equipment Connections section.
Reinstall the CABLE MANAGEMENT as shown.
Bundle the cables using the supplied twister holder.
19
Installation
How to join the product assembly to the wall to protect the set tumbling
- Set it up close to the wall so the product doesn’t fall over when it is pushed backwards.
- The instructions shown below is a safer way to set up the product, which is to fix it on the wall so the product doesn’t fall over when it is pulled in the forward direction. It will prevent the product from falling forward and hurting people. It will also prevent the product from damage caused by fall. Please make sure
that children don’t climb on or hang from the product.
42PC3D/42PC3DV/50PC3D
If the set will be mounted on a desk top, insert the 2 eye-bolts and tighten them securely in the upper
holes as shown.
Install the wall brackets on the wall with 2 bolts*, (not supplied with the product), as shown.
Match the height of the eye-bolts and the wall brackets.
Check to be sure the eye-bolts and the brackets are tightened securely.
Secure the TV assembly to the wall with strong strings or wire cables, (not supplied with the product), as
shown.
32/37/42LC2D
Use the bracket and the bolt to fix the product to the wall as shown in the picture.
Use a sturdy rope (not provided as parts of the product, must purchase separately) to tie the product.
It is safer to tie the rope so it becomes horizontal between the wall and the product.
Secure the bracket with the bolt (not provided as parts of the product, must purchase separately) on
the wall.
Notes
• When moving the product to another place undo the ropes first.
• Use a product holder or a cabinet that is big and strong enough for the size and weight of the product.
• To use the product safely make sure that the height of the bracket that is mounted on the wall is same
as that of the product.
20
AUDIO
AUDIO
VIDEO
L/MONO
S-VI
S-VIDEO
VIDEO
L/MONO
AV IN 2
AV IN 2
Installation
External Equipment Connections
AV OUT
VIDEO
AUDIO
S-VIDEO
VIDEO
AUDIO
AUDIO
L/MONO
COMPONENT IN
AV IN 1
VIDEO
L/MONO
Antenna or Cable Connection
S-VIDEO
AUDIO
S-VIDEO
NOTE: All cables shown are not included with the TV
Analog and Digital TV signals provided on antenna
VIDEO
AV IN 2
- Antenna or Cable Service without a Cable Box Connection.
- For optimum picture quality, adjust antenna direction if needed.
AV IN 2
Multi-family Dwellings/Apartments
(Connect to wall antenna socket)
Wall Antenna Socket
AV OUT
ANTENNA
IN
Turn clockwise to tighten.
S-VIDEO
S-VIDEO
REMOTE
AUDIO IN
VIDEO CONTROL AUDIO
(RGB/DVI)
COMPONENT IN
AUDIO
L/MONO
RGB IN
(PC/DTV)
VIDEO
UHF Antenna
AUDIO
RS-232C IN
(CONTROL & SERVICE)
VIDEO
AUDIO
CABLE
IN
AV IN 1
L/MONO
DIGITAL AUDIO OUT
OPTICAL
HDMI/DVI IN
VHF Antenna
S-VIDEO
RF Coaxial Wire (75 ohm)
Outdoor Antenna
VIDEO
Bronze Wire
AV IN 2
AV IN 2
Be careful not to bend the bronze wire when
connecting the antenna.
Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)
ANTENNA
IN
Analog and Digital TV signals provided on cable
AV OUT
HDMI/DVI IN
DIGITAL AUDIO OUT
OPTICAL
RS-232C IN
(CONTROL & SERVICE)
VIDEO
AUDIO
AUDIO
VIDEO
CABLE
IN
RF Coaxial Wire (75 ohm)
S-VIDEO
VIDEO
L/MONO
S-VIDEO
Cable TV Wall Jack
AUDIO IN
(RGB/DVI)
REMOTE
CONTROL
AUDIO
S-VIDEO
VIDEO
AUDIO
COMPONENT IN
AV IN 1
RGB IN
(PC/DTV)
L/MONO
Turn clockwise to tighten.
IN 2
Analog and Digital TVAVsignals
provided on cable and antenna
AV IN 2
Bronze Wire
Antenna
RF Coaxial Wire (75 ohm)
ANTENNA
IN
AV OUT
Turn clockwise to tighten.
VIDEO
Cable TV Wall Jack
AUDIO
S-VIDEO
VIDEO
AUDIO
CABLE
IN
RF Coaxial Wire
RS-232C IN
DIGITAL AUDIO(75
OUT ohm)
HDMI/DVI IN
OPTICAL
AUDIO IN
(RGB/DVI)
REMOTE
CONTROL
(CONTROL & SERVICE)
COMPONENT IN
AV IN 1
RGB IN
(PC/DTV)
Bronze Wire
signal
amplifier
ANTENNA
IN
CABLE
IN
AUDIO IN
(RGB/DVI)
RGB IN
(PC/DTV)
REMOTE
CONTROL
• In a poor signal area to improve picture quality, purchase and install a signal amplifier.
• If the antenna needs to be split for two TV’s, install a “2-Way Signal Splitter”
in the connections.
• If the antenna is not installed properly, contact your dealer for assistance.
21
Installation
VCR Setup
- To avoid picture noise (interference), leave an adequate distance between the VCR and TV.
- Typically a frozen still picture from a VCR. If the 4:3 picture format is used; the fixed images on the sides
of the screen may remain visible on the screen.
When connecting with an antenna
VCR
Connect the RF antenna out socket of the VCR to
the Antenna socket on the set.
Connect the antenna cable to the RF antenna in
socket of the VCR.
Set VCR output switch to 3 or 4 and then tune TV
to the same channel number.
Insert a video tape into the VCR and press PLAY
on the VCR. (Refer to the VCR owner’s manual.)
Connect the AUDIO/VIDEO jacks between TV
and VCR. Match the jack colors (Video = yellow,
Audio Left = white, and Audio Right = red)
Insert a video tape into the VCR and press PLAY
on the VCR. (Refer to the VCR owner’s manual.)
Select AV1 input source using the INPUT button
on the remote control.
- If connected to AV IN2, select AV2 input source.
ANT IN
ANT OUT
S-VIDEO OUT
(R) AUDIO (L) VIDEO
OUTPUT
SWITCH
IN
ANTENNA
IN
CABLE
IN
ANTENNA
IN
CABLE
IN
When connecting with a RCA cable
VCR
ANT IN
OUT
S-VIDEO
ANT OUT
(R) AUDIO (L) VIDEO OUTPUT
SWITCH
IN
AV OUT
VIDEO
AV
V OUT
AUDIO
S-VIDEO
VIDEO
AUDIO
COMPONENT IN
AV IN 1
(MONO)
VIDEO
S-VIDEO
AUDIO
VIDEO
AUDIO
COMPONENT IN
AV
V IN 1
• If you have a mono VCR, connect the audio cable from the VCR to the AUDIO L/MONO jack of the
set.
• This TV finds the connected input sources automatically for AV1, AV2 and Component 1-2. It is presumed that RGB and HDMI/DVI sources are connected.
AV OUT
22
VIDEO
AV OUT
VIDEO
AUDIO
S-VIDEO
AV IN 1
VIDEO
AUDIO
COMPONENT IN
AUDIO
S-VIDEO
VIDEO
AUDIO
Installation
AV OUT
VIDEO
AUDIO
S-VIDEO
VIDEO
AUDIO
COMPONENT IN
AV IN 1
When connecting with an S-Video cable
VCR
ANT IN
OUT
S-VIDEO
Connect the S-VIDEO output of the VCR to the SVIDEO input on the set. The picture quality is
improved; compared to normal composite (RCA
cable) input.
Connect the audio outputs of the VCR to the
AUDIO input jacks on the set.
Insert a video tape into the VCR and press PLAY
on the VCR. (Refer to the VCR owner’s manual.)
Select AV1 input source with using the INPUT
button on the remote control.
- If connected to AV IN2, select AV2 input source.
ANT OUT
(R) AUDIO (L) VIDEO OUTPUT
SWITCH
IN
AV
V OUT
(MONO)
VIDEO
AUDIO
S-VIDEO
VIDEO
AUDIO
COMPONENT IN
AV
V IN 1
Do not connect to both Video and S-Video at the same time. In the event that you connect
both Video and the S-Video cables, only the S-Video will work.
External AV Source Setup
Connect the AUDIO/VIDEO jacks between TV
and external equipment. Match the jack colors
(Video = yellow, Audio Left = white, and Audio
Right = red).
Select AV2 input source with using the INPUT
button on the remote control.
- If connected to AV IN1 input, select AV1 input
source.
Operate the corresponding external equipment.
Refer to external equipment operating guide.
S-VIDEO
AUDIO
L/MONO
MONO
VIDEO
AV
V IN 2
Camcorder
Video Game Set
AUDIO
VIDEO
• This TV finds the connected input sources
automatically for AV1, AV2 and Component 12. It is presumed that RGB and HDMI/DVI
sources are connected.
23
HDMI/DVI IN
DIGITAL AUDIO OUT
OPTICAL
RS-232C IN
(CONTROL & SERVICE)
AV OUT
Installation
VIDEO
AUDIO
S-VIDEO
VIDEO
AUDIO
COMPONENT IN
AV IN 1
DVD Setup
When connecting with a S-Video cable
DVD
(R) AUDIO (L)
S-VIDEO
AV
V OUT
(MONO)
VIDEO
AUDIO
UDIO
S-VIDEO
VIDEO
AUDIO
UDIO
COMPONENT IN
AV
V IN 1
Connect the S-VIDEO output of the DVD to the S-VIDEO input on the set.
Connect the audio outputs of the DVD to the AUDIO input jacks on the set.
Turn on the DVD player, insert a DVD.
Select AV1 input source with using the INPUT button on the remote control.
- If connected to AV IN2, select AV 2 input source.
Refer to the DVD player's manual for operating instructions.
When connecting with a HDMI cable
HDMI/DVI IN
DIGITAL AUDIO OUT
OPTICAL
RS-232C IN
(CONTROL & SERVICE)
AV OUT
VIDEO
AUDIO
S-VIDEO
VIDEO
AUDIO
COMPONENT IN
AV IN 1
DVD
HDMI-DVD OUTPUT
Connect the HDMI output of the DVD to the
HDMI/DVI IN jack on the set.
Select HDMI/DVI input source with using the
INPUT button on the remote control.
Refer to the DVD player's manual for operating
instructions.
AV OUT
24(
VIDEO
AUDIO
AV IN 1
S-VIDEO
VIDEO
AUDIO
COMPONENT IN
• TV can receive the video and audio signal
simultaneously with using a HDMI cable.
• If the DVD supports Auto HDMI function, the
DVD output resolution will be automatically
set to 1280x720p.
• If the DVD does not support Auto HDMI, you
need to set the output resolution appropriately. To get the best picture quality, adjust the
output resolution of the DVD to 1280x720p.
Installation
When connecting with a component cable
DVD
(R) AUDIO (L)
HDMI/DVI IN
VIDEO
AUDIO
UDIO
DIGITAL AUDIO OUT
OPTICAL
AV
V OUT
(MONO)
VIDEO
AUDIO
UDIO
S-VIDEO
COMPONENT IN
AV
V IN 1
Connect the video outputs (Y, PB, PR) of the DVD to the COMPONENT IN VIDEO jacks on the set.
Connect the audio outputs of the DVD to the COMPONENT IN AUDIO jacks on the set.
Turn on the DVD player, insert a DVD.
Select Component 1 input source with using the INPUT button on the remote control.
Refer to the DVD player's manual for operating instructions.
AV OUT
• Component Input ports
To get better picture quality, connect a DVD player to the component input ports as shown below.
VIDEO
PR
Component ports on the TV
PB
Video output ports
on DVD player
Pr
Pb
B-Y R-Y
Cb Cr
PB PR
AUDIO
AV IN 1
S-VIDEO
VIDEO
AUDIO
COMPONENT IN
25
RS-232C IN
(CONTROL & SERVICE)

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
Linearized                      : No
Page Count                      : 11
PDF Version                     : 1.6
Has XFA                         : No
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:93935d63-9139-495d-ac89-dd289267d109
Modify Date                     : 2005:12:05 22:32:16+09:00
Create Date                     : 2005:12:05 22:32:06+09:00
Metadata Date                   : 2005:12:05 22:32:16+09:00
Document ID                     : uuid:8ee78733-33cd-416a-81f6-0da44e77c577
Format                          : application/pdf
Title                           : 527A
Creator                         : 3.3: LaserWriter 8 8.7.1
Author                          : sun
Producer                        : Acrobat Distiller 4.0.5  for Macintosh

EXIF Metadata provided by EXIF.tools