LG Electronics USA 50PX2DUD PDP Display User Manual 528Men

Download:
Mirror Download [FCC.gov]
Document ID	547337
Application ID	ucCeLt5J7cHtNH3rj2WFew==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	162.28kB (2028540 bits)
Date Submitted	2005-06-01 00:00:00
Date Available	2005-05-31 00:00:00
Creation Date	1990-05-25 09:22:20
Producing Software	Acrobat Distiller 4.0 for Macintosh
Document Lastmod	2005-05-26 13:27:06
Document Title	528Men
Document Creator	QuarkXPressª3.3E: LaserWriter 8 Z1-8.7.1
Document Author:	PSY

Installation and Operating Guide | Warranty
Model Numbers | Z50PX2D | PLASMA TV
© Copyright 2005, LG Electronics USA, Inc.
Warning/Caution
Warning/Caution
WARNING/CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING/CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER
SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to
the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of
important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
WARNING/CAUTION:
TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
FCC NOTICE
• A Class B digital device
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
• Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
CAUTION:
Do not attempt to modify this product in any way without written authorization from LG Electronics. Unauthorized modification could void the user’s authority to operate this product.
COMPLIANCE:
The responsible party for this device compliance is:
Zenith Electronics Corporation
1-201-816-2000
Marked and Distributed in the United States by LG Electronics U.S.A., Inc.
1000 Sylvan Avenue, Englewood Cliffs, NJ 07632
http://www.zenith.com
WARNING/CAUTION
TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.
2 Plasma TV
Safety Instructions
Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS
Important safety instructions shall be provided with each apparatus. This information shall be given in a separate booklet or
sheet, or be located before any operating instructions in an instruction for installation for use and supplied with the apparatus. This information shall be given in a language acceptable to the country where the apparatus is intended to be used. The
important safety instructions shall be entitled “Important Safety Instructions”. The following safety instructions shall be included where applicable, and, when used, shall be verbatim as follows. Additional safety information may be included by adding
statements after the end of the following safety instruction list. At the manufacturer’s option, a picture or drawing that illustrates the intent of a specific safety instruction may be placed immediately adjacent to that safety instruction :
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers)that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two blades and a third grounding prong, The wide blade or the
third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
PORTABLE CART WARNING
Owner’s Manual 3
Safety Instructions
Safety Instructions
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged
in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into
the apparatus, the apparatus has exposed to rain or moisture, does not operate normally, or has been dropped.
15. CAUTION concerning the Power Cord :
Most appliances recommend they be placed upon a dedicated circuit; that
is, a single outlet circuit which powers only that appliance and has no
additional outlets or branch circuits. Check the specification page of
this owner's manual to be certain.
Do not overload wall outlets. Overloaded wall outlets, loose or damaged
wall outlets, extension cords, frayed power cords, or damaged or
cracked wire insulation are dangerous. Any of these conditions could
result in electric shock or fire. Periodically examine the cord of your
appliance, and if its appearance indicates damage or deterioration,
unplug it, discontinue use of the appliance, and have the cord replaced
with an exact replacement part by an authorized servicer.
Protect the power cord from physical or mechanical abuse, such as being
twisted, kinked, pinched, closed in a door, or walked upon. Pay
particular attention to plugs, wall outlets, and the point where the
cord exits the appliance.
16. Outdoor Use Marking :
WARNING - To Reduce The Risk Of Fire Or Electric Shock, Do Not Expose This Appliance To Rain Or Moisture.
17. Wet Location Marking :
Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall
be placed on the apparatus.
4 Plasma TV
Contents
Contents
Warning/Caution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3~4
Manual Sound Control (Custom Option) . . . . . .27
Front Surround . . . . . . . . . . . . . . . . . . . . . . . . .28
TV Speakers On/Off Setup . . . . . . . . . . . . . . . .28
BBE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Stereo/SAP Broadcasts Setup . . . . . . . . . . . . . .29
Time Menu Options
Auto Clock Setup . . . . . . . . . . . . . . . . . . . . . . .30
Manual Clock Setup . . . . . . . . . . . . . . . . . . . . .30
On/Off Timer Setup . . . . . . . . . . . . . . . . . . . . .30
Sleep Timer / Auto Off . . . . . . . . . . . . . . . . . . . .31
Option Menu Features
Aspect Ratio Control . . . . . . . . . . . . . . . . . . . . .32
Cinema 3:2 Mode Setup . . . . . . . . . . . . . . . . . .32
Caption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Caption / Text . . . . . . . . . . . . . . . . . . . . . . . . . .33
Caption Option . . . . . . . . . . . . . . . . . . . . . . . .34
ISM Method . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Low Power . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
Lock Menu Options
Parental Lock Setup . . . . . . . . . . . . . . . . . . . . .37
EPG (Electronic Program Guide) . . . . . . . . . . . . .38
Brief Info. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
EZ Mute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Freeze & Magnify . . . . . . . . . . . . . . . . . . . . . . . . .40
Screen Setup for PC mode . . . . . . . . . . . . . . . . . .41
APM(Adaptive Picture Mode) . . . . . . . . . . . . . . . .42
Introduction
Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Connection Options . . . . . . . . . . . . . . . . . . . . . .8
Remote Control Key Functions . . . . . . . . . . . 9~10
Installation
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Installation Instructions . . . . . . . . . . . . . . . . . .11~12
Joining the TV assembly to the wall to protect the set
tumbling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
External Equipment Connections . . . . . . . . . .13~18
Antenna or Cable Connection . . . . . . . . . . .13~14
VCR Setup . . . . . . . . . . . . . . . . . . . . . . . . . . .14
External A/V Source Setup . . . . . . . . . . . . . . . .15
DVD Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
CableCARDTM Setup . . . . . . . . . . . . . . . . . . . . .16
HDSTB Setup . . . . . . . . . . . . . . . . . . . . . . . . .16
PC Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Monitor Out Setup . . . . . . . . . . . . . . . . . . . . . .18
Digital Audio Output . . . . . . . . . . . . . . . . . . . . .18
HDMI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19~21
Operation
Turning the TV On . . . . . . . . . . . . . . . . . . . . . . . .22
On-screen Menus Language Selection . . . . . . . . .22
Setup Menu Options
EZ Scan (Channel Search) . . . . . . . . . . . . . . . .23
Manual Scan . . . . . . . . . . . . . . . . . . . . . . . . . .23
Channel Edit . . . . . . . . . . . . . . . . . . . . . . . . . . .24
DTV Signal Strength . . . . . . . . . . . . . . . . . . . . .24
Channel Label Setup . . . . . . . . . . . . . . . . . . . .25
Input Source . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Input Label . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Video Menu Options
EZ Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Manual Picture Control (Custom Option) . . . . . .26
Color Temperature Control . . . . . . . . . . . . . . . .26
Video Reset . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Audio Menu Options
Audio Language . . . . . . . . . . . . . . . . . . . . . . . .27
EZ SoundRite / EZ Sound . . . . . . . . . . . . . . . . .27
External Control Device Setup . . . . . . . . . . . . . . . .43~48
IR Codes
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49~50
Programming the Remote
Programming Codes
. . . . . . . . . . . . . . . . . . . . . .51
. . . . . . . . . . . . . . . . . . . . . . .52~53
Troubleshooting Checklist . . . . . . . . . . . . . . . . . . . . . .54
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Product Specifications . . . . . . . . . . . . . . . . . . . . . . . . .56
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59~60
Setup and Operation Checklist
Setup and Operation Checklist
(See pages 13~21 for available connection and operational setup options.)
1. Unpack TV and all accessories.
5. Turn video source equipment on.
2. Connect all external video and audio equipment.
see pages 13~18.
6. Select viewing source for TV.
See pages 25.
3 Install batteries in remote control.
See page 9.
7. Fine-tune source image and sound to your personal preference or as required by source.
See pages 26~ 29.
4. Turn TV on.
See page 22.
8. Additional features set up
See Contents above.
After reading this manual, keep it handy for future reference.
Owner’s Manual 5
Introduction
Introduction
What is a Plasma Display Panel (PDP)?
A plasma display panel is the latest display technology and the best way to achieve flat panel displays with excellent image quality
and large screen sizes that are easily viewable. The PDP can be thought of as a descendant of the neon lamp and it can be also
be viewed as a series of fluorescent lamps.
How does it work?
PDP is an array of cells, known as pixels, which are comprised of 3 sub pixels, corresponding to the colors red, green, and blue.
Gas in a plasma state is used to react with phosphors in each sub-pixel to produce colored light (red, green, or blue). These phosphors are the same types used in Cathode Ray Tube (CRT) devices such as televisions and common computer monitors.
You get the rich, dynamic colors that you expect. Each sub-pixel is individually controlled by advanced electronics to produce over
16 million different colors. All of these mean that you get perfect images that are easily viewable in a display that is less than 5
inches thick.
160° - Wide angle range of vision
Your flat panel plasma screen offers an exceptionally broad viewing angle -- over 160 degrees. This means that the display is
clear and visible to viewers anywhere in the room who can see the screen.
Wide Screen
The screen of the Plasma Display is so wide that your viewing experience is as if you are in a theater.
Multimedia
Connect your plasma display to a PC and you can use it for conferencing, games, and Internet browsing.
Versatile
The light weight and thin size makes it easy to install your plasma display in a variety of locations where conventional TVs will not
fit.
The PDP Manufacturing Process: a few minute colored dots may be present on the PDP screen
The PDP (Plasma Display Panel), which is the display device of this product, is composed of 0.9 to 2.2 million cells. A few cell
defects will normally occur in the PDP manufacturing process. Several tiny, minute colored dots visible on the screen should be
acceptable. This also occurs in other PDP manufacturers' products. The tiny dots appearing does not mean that this PDP is defective. Thus a few cell defects are not sufficient cause for the PDP to be exchanged or returned. Our production technology minimizes these cell defects during the manufacture and operation of this product.
6 Plasma TV
Introduction
Controls
- This is a simplified representation of front panel.
Here shown may be somewhat different from your TV.
Front Panel Controls
TV/VIDEO
MENU
VOL
CH
CHANNEL (E,
D)
Buttons
VOLUME (F,G) Buttons
Remote
Control Sensor
MENU Button
TV/VIDEO Button
POWER Button
Power Standby Indicator
-Without CableCARDTM : Illuminates red in standby mode, Illuminates green when the TV is
turned on.
-Inserting the CableCARDTM : Illuminates orange
in standby mode, Illuminates green when the TV
is turned on.
Owner’s Manual 7
Introduction
Connection Options
Back Connection Panel
S-VIDEO Input
A connection available to provide better picture quality than the video input.
S-VIDEO
FRONT
A/V INPUT
L / MONO
VIDEO
VIDEO Input
Connects the video signal from a
video device.
R AUDIO
AUDIO Input
Use to connect to hear stereo sound
from an external device.
RGB/AUDIO INPUT
Connect the monitor output connector
from a PC to the appropriate input port.
RS-232C INPUT (CONHDMI/DVI TROL/SERVICE) PORT
connect a Connect to the RS-232C
DVI(Video)port on a PC.
signal to
HDMI/DVI.
Remote Control Port
Connect your wired
remote control here.
S-Video Input
Connect S-Video out
from an S-VIDEO
device to the SVIDEO input.
Antenna Input
Connect over-theair signals to this
jack.
RS-232C INPUT
(CONTROL/SERVICE)
VIDEO
OUTPUT
AUDIO
COMPONENT INPUT 2
COMPONENT2
INPUT
HDMI /DVI
AUDIO
MONITOR OUTPUT
DIGITAL AUDIO (OPTICAL)
RGB INPUT
DVI
INPUT
Digital Audio (DVI: Digital Visual
Interface/Component2) Input/
Digital Audio Output
Connect digital audio from various types of equipment. Note: In
standby mode,
these ports will not work.
8 Plasma TV
VIDEO
AUDIO
INPUT
DVD
/DTV
INPUT
REMOTE
CONTROL
CABLE
ANTENNA
AC INPUT
(MONO)
COMPONENT INPUT 1
A/V INPUT
Audio/Video Input
Connect audio/video DVD/DTV Input
output from an
(Component 1-2)
external device to Connect a component
these jacks.
video/audio device to
these jacks.
S-VIDEO
Monitor Output
Connect a second TV or
Monitor.
CABLE Input
Connect cable signals to this
jack, either directly or through
a cable box.
Power Cord Socket
This TV operates on an AC power. The voltage
is indicated on the Specifications page. Never
attempt to operate the TV on DC power.
Introduction
Remote Control Key Functions
- When using the remote control, aim it at the remote control sensor on the TV.
TV INPUT
• Rotates the input mode between Antenna
and Cable.
• Video, Front Video, Component 1-2, RGBDTV (or RGB-PC) and HDMI/DVI input
sources, screen returns to the last TV.
TV/VIDEO
TV INPUT
MODE
MODE
Selects the remote operating mode: TV,
DVD, VCR, AUDIO, CABLE or STB. Select
a mode other than TV, for the remote to
operate an external device.
TV/VIDEO
External input modes rotate in regular
sequence: Antenna, Cable, Video, Front
Video, Component 1-2, RGB-DTV (or
RGB-PC) and HDMI/DVI input sources.
(Video, Front Video, Component 1-2 input
sources are linked automatically, only if
these are connected )
GUIDE
MENU
Brings up the main menu to the screen.
RATIO
Changes the aspect ratio.
EXIT
TIMER
CC
EXIT
Clears all on-screen displays and returns to
TV viewing from any menu.
INFO
When you watch the TV, information displays on top of the screen. Not available
in Component 1-2, RGB and HDMI/DVI
mode. (Refer to p.41)
TIMER
Lets you select the amount of time before
your TV turns itself off automatically.
FAV
Scrolls the Favorite channels.
MUTE
Switches the sound on or off.(Refer to p.42)
FLASHBK
FREEZE
EZ PIC
Selects a factory preset picture mode
depending on the viewing environment.
FLASHBK
Tunes to the recent channels.
FREEZE
Freezes the currently-viewed picture.
Main picture is frozen.
Installing Batteries
• Open the battery compartment cover on the back side and install the batteries
matching correct polarity (+ with +, - with -).
• Install two 1.5V AA batteries. Don’t mix old or used batteries with new ones. Close
cover.
Owner’s Manual 9
Introduction
Remote Control Key Functions
TV/VIDEO
TV INPUT
POWER
Turns your TV or any other programmed
equipment on or off, depending on mode.
MODE
GUIDE
Shows program schedule.
GUIDE
THUMBSTICK (Up/Down/Left/Right/ENTER)
Allows you to navigate the on-screen menus
and adjust the system settings to your preference.
EXIT
CC
Select a closed caption:
Off, CC1~4, Text1~4.
TIMER
CHANNEL UP/DOWN
Selects available channels found with EZ
scan.
PAGE UP/PAGE DOWN
Moves from one full set of screen information to the next one.
CC
VOLUME UP/DOWN
Increases/decreases the sound level.
EZ SOUND
Selects the sound appropriate for the program's character.
ADJUST
Adjusts screen position, size, and phase in
PC mode.
LIGHT
Illuminates the remote control
buttons of selected mode.
10 Plasma TV
VCR/DVD BUTTONS
• Control some video cassette recorders
or DVD players. ("RECORD" button is not
available for DVD players.)
NUMBER buttons
FLASHBK
FREEZE
SAP
Selects MTS sound: Mono, Stereo, and
SAP in Analog mode. Change the audio
language in DTV mode.
Installation
Installation
Accessories
Ensure that the following accessories are included with your plasma display. If an accessory is missing, please contact the dealer
where you purchased the product.
1.5V
1.5V
Owner’s Manual
Batteries
Power Cord
75Ω Round Cable
TV/VIDEO
TV INPUT
MODE
DAY
DAY -
GUIDE
EXIT
TIMER
CC
FLASHBK
2-Wall brackets
Remote Control
2-eye-bolts
D-sub 15 pin Cable
Installation Instructions
Joining the TV assembly to the wall to protect the set tumbling
- Secure the TV assembly by joining it to a wall by using the TV/Wall brackets.
• If the set will be mounted on a desk top, insert
the 2 eye-bolts and tighten them securely in the upper
holes as shown.
Install the wall brackets on the wall with 2 bolts*, (not
supplied with the product), as shown.
Match the height of the eye-bolts and the wall brackets.
Check to be sure the eye-bolts and the brackets are
tightened securely.
• Secure the TV assembly to the wall with strong strings
or wire cables, (not supplied with the product), as
shown.
Owner’s Manual 11
Installation
Installation Instructions
• The TV can be installed in various ways such as on a wall, or on a desktop etc.
• The TV is designed to be mounted horizontally.
GROUNDING
Power
Supply
Ensure that you connect the earth ground wire to prevent possible
electric shock. If grounding methods are not possible, have a qualified
electrician install a separate circuit breaker. Do not try to ground the
unit by connecting it to telephone wires, lightening rods, or gas pipes.
Short-circuit
Breaker
Desktop Pedestal Installation
Wall Mount: Horizontal installation
For proper ventilation, allow a clearance of 4” on each
side and 2” from the wall. Detailed installation instructions are available from your dealer, see the optional
Wall Mounting Bracket Installation.
For proper ventilation, allow a clearance of 4” on each
side and the top, 2.36” on the bottom, and 2” from the
wall. Detailed installation instructions are included in
the optional Desktop Stand Installation.
2 inches
4 inches
4 inches
4 inches
4 inches
4 inches
12 Plasma TV
4 inches
2 inches
4 inches
2.36 inches
Installation
External Equipment Connections
Antenna or Cable Connection
1. Analog and Digital TV signals provided on antenna
- Wall Antenna Socket or Outdoor Antenna without a Cable Box Connections
- For optimum picture quality, adjust antenna direction if needed.
Multi-family Dwellings/Apartments
(Connect to wall antenna socket)
Wall Antenna
Socket
CABLE
ANTENNA
AC INPUT
Bronze Wire
RF Coaxial Wire (75 ohm)
VHF Antenna
Turn clockwise to tighten.
UHF Antenna
Bronze Wire
Outdoor
Antenna
Be careful not to bend the bronze wire when
connecting the antenna.
Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)
2. Analog and Digital TV signals provided on cable
Cable TV Wall
Jack
Bronze Wire
RF Coaxial Wire (75 ohm)
REMOTE
CONTROL
Bronze Wire
CABLE
ANTENNA
Owner’s Manual 13
Installation
3. Analog and Digital TV signals provided on cable and antenna
Antenna
Bronze Wire
RF Coaxial Wire (75 ohm)
Cable TV Wall
Jack
Turn clockwise to tighten.
RF Coaxial Wire (75 ohm)
CABLE
ANTENNA
AC INPUT
Bronze Wire
• To improve the picture quality in a poor signal area,
please purchase a signal amplifier and install properly.
ANTENNA
• If the antenna needs to be split for two TV’s, install a “2Way Signal Splitter” in the connections.
• If the antenna is not installed properly, contact your dealer for assistance.
Signal
Amplifier
VCR Setup
- To avoid picture noise (interference), leave an adequate distance between the VCR and TV
- Use the ISM Method (on the Option menu) feature to avoid having a fixed image remain on the screen for a long period of time.
If the 4:3 picture format is used; the fixed images on the sides of the screen may remain visible on the screen.
Connection Option 1
Set VCR output switch to channel 3 or 4 and
then tune the TV to the same channel number.
Connection Option 2
1. Connect the audio and video cables from the
VCR's output jacks to the TV input jacks, as
shown in the figure.
When connecting the TV to VCR, match the
jack colors (Video = yellow, Audio Left = white,
and Audio Right = red).
If you connect an S-VIDEO output from VCR to
the S-VIDEO input, the picture quality is
improved; compared to connecting a regular
VCR to the Video input.
2. Insert a video tape into the VCR and press
PLAY on the VCR. (Refer to the VCR owner’s
manual.)
3. Select the input source with using the
TV/VIDEO button on the remote control. Note
that this TV finds the connected input sources
automatically for Video, Front Video and
Component 1-2. It is presumed that RGB and
HDMI/DVI sources are connected.
Do not connect to both Video and
S-Video at the same time.
14 Plasma TV
VIDEO
AUDIO
VIDEO
AUDIO
COMPONENT INPUT 2
MONITOR OUTPUT
COMPONENT INPUT 1
A/V INPUT
PTICAL)
RGB INPUT
AUDIO
INPUT
DVD
/DTV
INPUT
REMOTE
CONTROL
CABLE
ANTENNA
AC INPUT
(MONO)
S-VIDEO
ANT OUT
ANT IN
S-VIDEO
OUT
OUTPUT
SWITCH
IN
(R) AUDIO (L)
VIDEO
VCR Rear
Installation
External A/V Source Setup
How to connect
RS-232C INPUT
Connect the audio and video cables from the external equipment's output jacks to the TV input jacks, as shown in the
figure.
When connecting the TV to external equipment, match the
jack colors (Video = yellow, Audio Left = white, and Audio
Right = red).
(CONTROL/SERVICE)
VIDEO
OUTPUT
AUDIO
HDMI 2
COMPONENT INPUT 2
COMPONENT2
INPUT
VIDEO
AUDIO
R C
E O
M N
O T
T R
E O
AC INPUT
MONITOR OUTPUT
DIGITAL AUDIO (OPTICAL)
HDMI /DVI
AUDIO
INPUT
RGB INPUT
DVD
/DTV
INPUT
CABLE
ANTENNA
(MONO)
DVI
INPUT
COMPONENT INPUT 1
A/V INPUT
How to use
1. Select the input source with using the TV/VIDEO button on
the remote control. Note that this TV finds the connected
input sources automatically for Video, Front Video and
Component 1-2. It is presumed that RGB and HDMI/DVI
sources are connected.
2. Operate the corresponding external equipment.
Camcorder
R AUDIO L
DVD Setup
VIDEO
Video Game
Device
RS-232C INPUT
(CONTROL/SERVICE)
VIDEO
AUDIO
VIDEO
AUDIO
OUTPUT
COMPONENT2
INPUT
DIGITAL AUDIO (OPTICAL)
HDMI /DVI
AUDIO
INPUT
RGB INPUT
DVI
INPUT
COMPONENT INPUT 2
MONITOR OUTPUT
COMPONENT INPUT 1
A/V INPUT
DVD
/DTV
INPUT
REMOTE
CONTROL
CABLE
ANTENNA
AC INPUT
(MONO)
S-VIDEO
DVD
or
or
DIGITAL AUDIO
OPTICAL
(R) AUDIO (L)
S-VIDEO
(R) AUDIO (L)
How to connect
1. Connect the DVD video outputs (Y, PB, PR) to the COMPONENT (Y, PB, PR) INPUT jacks on the TV and connect the DVD
audio outputs to the AUDIO INPUT jacks on the TV, as shown in the figure.
2. If your DVD only has an S-Video output jack, connect this to the S-VIDEO input on the TV and connect the DVD audio outputs
to the AUDIO INPUT jacks on the TV, as shown in the figure.
Note: If your DVD player does not have component video output, use S-Video.
How to use
1. Turn on the DVD player, insert a DVD.
2. Use the TV/VIDEO button on the remote control to select Component 1 or Component 2. (If connected to S-VIDEO, select
the Video or Front Video external input source.)
3. Refer to the DVD player's manual for operating instructions.
• Component Input ports
To get better picture quality, connect a DVD player to the component input ports as shown below.
Component ports
on the TV
PB
Video output ports
on DVD player
Pr
Pb
B-Y R-Y
Cb Cr
PB PR
PR
Notes:
• Digital Audio will not work for Component 1 input source.
• Digital Audio operation has priority if Digital Audio and AUDIO L/R
are connected at the same time.
Owner’s Manual 15
Installation
HDSTB Setup
- This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you do receive Digital
signals from a digital set-top box or other digital external device, refer to the figure as shown below.
- This TV supports HDCP (High-bandwidth Digital Contents Protection) protocol for Digital Contents (480p,720p,1080i).
RS-232C INPUT
(CONTROL/SERVICE)
VIDEO
AUDIO
VIDEO
AUDIO
OUTPUT
COMPONENT2
INPUT
HDMI /DVI
DIGITAL AUDIO (OPTICAL)
RGB INPUT
AUDIO
INPUT
DVI
INPUT
COMPONENT INPUT 2
MONITOR OUTPUT
COMPONENT INPUT 1
A/V INPUT
DVD
/DTV
INPUT
REMOTE
CONTROL
CABLE
ANTENNA
AC INPUT
(MONO)
S-VIDEO
or
or
RGB-DTV OUTPUT
(R) AUDIO (L)
(R) AUDIO (L)
DIGITAL AUDIO
OPTICAL
DVI-DTV OUTPUT HDMI-DTV OUTPUT
DIGITAL AUDIO
OPTICAL
(R) AUDIO (L)
Digital Set-top Box
How to connect
Use the TV’s COMPONENT (Y, PB, PR) INPUT, RGB or HDMI/DVI jack
for video connections, depending on your set-top box connector. Then,
make the corresponding audio connections.
How to use
1. Turn on the digital set-top box. (Refer to the owner’s manual for the
digital set-top box.)
2. Use TV/VIDEO on the remote control to select Component 1,
Component 2, RGB-DTV, or HDMI/DVI source.
16 Plasma TV
Signal
480i
480p
720p
1080i
Component 1/2
Yes
Yes
Yes
Yes
RGB-DTV , HDMI/DVI
No
Yes
Yes
Yes
Installation
PC Setup
- This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings.
- The TV perceives 640x480, 60Hz as DTV 480p based on the PC graphic card, change the screen scanning rate for the graphic
card accordingly.

How to connect
1. Connect the PC to HDMI/DVI port of this TV with an HDMI-to-DVI cable(not supplied with this product).
2. If the PC(or the sound card of the PC) has a fiber optic digital audio output connector, connect the PC's audio output to DIGITAL AUDIO(OPTICAL) port for DVI INPUT.
3. If the PC(or the sound card of the PC) has an analog audio output connector, connect the PC's audio output to AUDIO INPUT
port located on the right side of RGB INPUT port.
How To Use
1. To get the best picture quality, adjust the PC graphics card to 1024x768, 60Hz.
2. Select HDMI/DVI input source in input source option of SETUP menu.(Refer to P.25)
TV/VIDEO button is also available for this purpose.
3. Check the image on your TV. There may be noise associated with the resolution, vertical pattern, contrast or brightness in PC
mode. If noise is present, change the PC output to another resolution, change the refresh rate to another rate or adjust the
brightness and contrast on the VIDEO menu until the picture is clear. If the refresh rate of the PC graphic card can not be
changed, change the PC graphic card or consult the manufacturer of the PC graphic card.

How to connect
1. Connect the PC to RGB INPUT port of this TV with a RGB cable(not supplied with this product).
2. If the PC(or the sound card of the PC) has an analog audio output connector, connect the PC's audio output to AUDIO INPUT
port located on the right side of RGB INPUT port.
How To Use
1. To get the best picture quality, adjust the PC graphics card to 1024x768, 60 Hz.
2. Select RGB-PC input source in input source option of SETUP menu.(Refer to P.25)
Once you select RGB-PC in main input option of SETUP menu, TV/VIDEO button is also available for this purpose.
3. Check the image on your TV. There may be noise associated with the resolution, vertical pattern, contrast or brightness in PC
mode. If noise is present, change the PC output to another resolution, change the refresh rate to another rate or adjust the
brightness and contrast on the VIDEO menu until the picture is clear. If the refresh rate of the PC graphic card can not be
changed, change the PC graphic card or consult the manufacturer of the PC graphic card.
Monitor Display Specifications (RGB-PC )
Resolution
720x400
640x480
Horizontal
Vertical
Frequency(KHz) Frequency(Hz)
31.469
70.08
37.927
85.03
31.469
Resolution
Horizontal
Vertical
Frequency(KHz) Frequency(Hz)
35.156
56.25
37.879
60.31
48.077
72.18
59.94
46.875
75.00
37.861
72.80
53.674
85.06
37.500
75.00
48.363
60.00
56.476
70.06
60.023
75.02
43.269
85.00
800x600
1024x768
Owner’s Manual 17
Installation
Monitor Display Specifications (HDMI/DVI Mode)
Horizontal
Vertical
Frequency(KHz) Frequency(Hz)
Resolution
31.469
640x480
37.861
800x600
Resolution
Horizontal
Vertical
Frequency(KHz) Frequency(Hz)
59.94
48.363
60.00
72.80
56.476
70.06
60.023
75.02
37.500
75.00
35.156
56.25
37.879
60.31
48.077
72.18
46.875
75.00
1024x768
Monitor Out Setup
The TV has a special signal output capability which allows you to
hook up a second TV or monitor.
VIDEO
AUDIO
VIDEO
RGB INPUT
AUDIO INPUT
AUDIO
AC INPUT
COMPONENT INPUT 2
MONITOR OUTPUT
DVD
/DTV
INPUT
REMOTE
CONTROL
(MONO)
COMPONENT INPUT 1
A/V INPUT
S-VIDEO
CABLE
ANTENNA
Connect the second TV or monitor to the TV’s MONITOR OUTPUT.
See the Operating Manual of the second TV or monitor for further
details regarding that device’s input settings.
Notes:
• Component, RGB-PC/RGB-DTV, HDMI/DVI, DTV input sources
cannot be used for Monitor out.
• When connecting with external audio equipments, such as amplifers or speakers, please turn the TV speakers off.(Refer to p.28)
• We recommend to use the video and audio output jacks for VCR
recording.
S-VIDEO
IN
VIDEO
(L) AUDIO (R)
Digital Audio Output
Send the TV’s audio to external audio equipment (stereo system) via
the Digital Audio Output (Optical) port.
How to connect
1. Connect one end of an optical cable to the TV Digital Audio
(Optical) Output port.
2. Connect the other end of the optical cable to the digital audio (optical) input on the audio equipment.
See the external audio equipment instruction manual for operation.
Note: When connecting with external audio equipments, such as
amplifers or speakers, please turn the TV speakers off.(Refer to
p.28)
Caution: Do not look into the optical output port.
Looking at the laser beam may damage
your vision.
18 Plasma TV
RS-232C INPUT
(CONTROL/SERVICE)
VIDEO
OUTPUT
COMPONENT INP
HDMI /DVI
COMPONENT2
INPUT
DIGITAL AUDIO (OPTICAL)
RGB INPUT
DVI
INPUT
AUDIO
INPUT
DVD
/DTV
INPUT
COMPONENT INP
Installation
HDMI
- HDMITM, the HDMI logo and High-Definition Multimedia Interface is a trademark or registered trademark of HDMI Licensing."
- This TV can receive the High-Definition Multimedia Interface(HDMI) or the Digital Visual Interface(DVI).
- This TV supports HDCP(High-bandwidth Digital Contents Protection) Protocol for 720x480p, 1280x720p, and 1920x1080i resolution.
- When you connect this TV with a source device(DVD player, Set Top Box or PC) supporting Auto HDMI/DVI function, the output
resolution of the source device will be automatically set to 1280x720p.
- If the source device does not support Auto HDMI/DVI, you need to set the output resolution appropriately.
To get the best picture quality, adjust the DVD Player or Set Top Box's output resolution to 1280x720p, and the PC graphics card's
output resolution to 1024x768, 60Hz.
- If the source device has an HDMI output, no other audio connection is necessary because HDMI-to-HDMI connection includes
both video and audio.
- If the source device has a DVI output and no HDMI output, a separated audio connection is necessary.

How To Connect
1. Connect the source device to HDMI/DVI port of this TV with an HDMI cable(not supplied with this product).
2. No separated audio connection is necessary.
How To Use
- If the source device supports Auto HDMI function, the output resolution of the source device will be automatically set to 1280x720p.
- If the source device does not support Auto HDMI, you need to set the output resolution appropriately.
To get the best picture quality, adjust the output resolution of the source device to 1280x720p.
- Select HDMI/DVI input source in input source option of SETUP menu.(Refer to P.25)
TV/VIDEO button is also available for this purpose.

How To Connect
1. Connect the source device to HDMI/DVI port of this TV with a HDMI-to-DVI cable(not supplied with this product).
2. A separated audio connection is necessary.
3. If the source device has a fiber optic digital audio output, connect the audio output to DIGITAL AUDIO(OPTICAL) port for DVI
INPUT.
4. If the source device has an analog audio output connector, connect the PC's audio output to AUDIO INPUT port located on the
right side of RGB INPUT port.
How To Use
- If the source device supports Auto DVI function, the output resolution of the source device will be automatically set to 1280x720p.
- If the source device does not support Auto DVI, you need to set the output resolution appropriately.
To get the best picture quality, adjust the output resolution of the source device to 1280x720p.
- Select HDMI/DVI input source in input source option of SETUP menu.(Refer to P.25)
TV/VIDEO button is also available for this purpose.
Owner’s Manual 19
Installation
Reference
Cable sample
HDMI Cable
(not supplied with the product)
HDMI to DVI Cable
(not supplied with the product)
Fiber Optic Digital Audio Cable
(not supplied with the product)
Analog Audio Cable(RCA type)
(not supplied with the product)
Analog Audio Cable(Stereo to RCA type)
(not supplied with the product)
20 Plasma TV
Installation
How to use
1. Connect the HDMI/DVI Source Devices(DVD Player or Set Top Box or PC) and the TV SET.
2. Turn on the display by pressing the POWER button on the TV SET and HDMI/DVI Source Devices remote control.
3. Select HDMI/DVI Input source in input source option of SETUP menu.(Refer to P.25)
4. Check the image on your TV SET. There may be noise associated with the resolution, vertical pattern, contrast or brightness in
HDMI/DVI Source Devices. If noise is present, change the HDMI/DVI Source Devices to another resolution, change the refresh
rate or adjust the brightness and contrast on the menu until the picture is clear. If the refresh rate of the PC graphics card can
not changed, change the PC graphics card or consult the manufacturer of the PC graphics card.
Notes:
- Depending on the graphics card, DOS mode may not work if you use a HDMI to DVI Cable.
- Avoid keeping a fixed image on the TV SET screen for a long period of time. The fixed image may become permanently imprinted on the screen. Use the Orbiter screen saver when possible.
- When Source Devices connected HDMI/DVI Input, output PC Resolution(VGA, SVGA, XGA), Position, Size may not fit to
Screen. As shown the lower picture, press the ADJUST button to adjust the screen Position of TV SET and contact an PC
graphics card service center.
- When Source Devices connected HDMI/DVI Input output TV SET Resolution(480p, 720p, 1080i), TV SET Display fit EIA/CEA861-B Specification to Screen. If not, refer to the Manual of HDMI/DVI Source Devices or contact your service center.
- In case HDMI/DVI Source Devices is not connected Cable or poor cable connection, "NO SIGNAL" OSD display in HDMI/DVI
Input. And In case of, Video Resolution not supported TV SET output in HDMI/DVI Source Devices, "INVALID FORMAT" OSD
display. Refer to the Manual of HDMI/DVI Source Devices or contact your service center.
POSITION
SIZE
PHASE
RESET
Adjust Close
PC mode
In This Mode, the Supported TV SET Resolution Specification
1920 x 1080 I @ 59.94Hz / 60Hz, 16:9
1280 x 720 P @ 59.94Hz / 60Hz, 16:9(preferred format)
720 x 480 P @ 59.94Hz / 60Hz, 16:9
720 x 480 P @ 59.94Hz / 60Hz, 4:3
In This Mode, the Supported PC Resolution Specification
640 x 480 @ 60Hz
640 x 480 @ 72Hz
640 x 480 @ 75Hz
800 x 600 @ 56Hz
800 x 600 @ 60Hz
800 x 600 @ 72Hz
800 x 600 @ 75Hz
1024 x 768 @ 60Hz(preferred format)
1024 x 768 @ 70Hz
1024 x 768 @ 75Hz
Owner’s Manual 21
Operation
Operation
Turning the TV On
* In this manual, the OSD (On Screen Display) may be different from your TV’s because it is just an
example to help you with the TV operation.
1. First, connect power cord correctly. At this moment, the TV switches to standby mode.
In standby mode to turn TV on, press the
, TV/VIDEO , CH (D / E) button on the TV or press the POWER,
TV INPUT, TV/VIDEO, CH (D / E), Number (0 ~ 9) button on the remote control.
2. Select the viewing source by using TV/VIDEO button on the remote control.
This TV is programmed to remember which power state it was last set to, even if the power cord is out.
3. When finished using the TV, press the POWER button on the remote control. The TV reverts to standby mode.
Notes:
• If you intend to be away on vacation, disconnect the power plug from the wall power outlet.
• Without CableCARDTM : Illuminates red in standby mode, Illuminates green when the TV is turned on.
• Inserting the CableCARDTM : Illuminates orange in standby mode, Illuminates green when the TV is turned on.
TV Setup
On-screen Menus Language Selection
- The menus can be shown on the screen in the selected language. First select your language.
1. Press the MENU button and then use
menu.
2. Press the
button and then use
button to select the OPTION
button to select Language.
3. Press the G button and then use D / E button to select your desired language.
From this point on, the on-screen menus will be shown in the selected language.
4. Press EXIT button to return to TV viewing or press MENU button to return to
the previous menu.
22 Plasma TV
Operation
Setup Menu Options
EZ Scan (Channel Search)
- Automatically finds all channels available through antenna or cable inputs, and stores them in memory on the channel list.
- Run EZ Scan again after any Antenna/Cable connection changes.
- A password is required to gain access to EZ Scan menu if the Lock System is turned on.
1. Press the MENU button and then use
2. Press the G button and then use
D /E
D /E
button to select the SETUP menu.
button to select EZ Scan.
3. Press the ENTER button to begin the channel search.
Allow EZ Scan to complete the channel search cycle for ANTENNA, and CABLE.
Manual Scan
- A password is required to gain access to Manual Scan menu if the Lock System is turned on.
1. Press the MENU button and then use
2. Press the G button and then use
D /E
D /E
button to select the SETUP menu.
button to select Manual Scan.
3. Press the G button and then use
CADTV.
D /E
button to select TV, DTV, CATV, and
4. Press the G button and then use
want to add or delete.
D /E
button to select channel number you
5. Press the ENTER button to add or delete for the channel number.
6. Press EXIT button to return to TV viewing or press MENU button to return to
the previous menu.
Notes:
• This channel number is a physical channel number, which is different from the normal channel number shown in Channel
Edit.
• When inserting the CableCARDTM, CATV, CADTV is not working in Manual Scan.
• TV: analog antenna(over-the-air) TV signal
DTV: digital antenna(over-the-air) TV signal
CATV: analog cable TV signal
CADTV: digital cable TV signal
Owner’s Manual 23
Operation
Setup Menu Options
Channel Edit
- Create two different types of channel lists in memory: “Custom List” and
“Favorite List” from the default channel list created from the EZ Scan channel
search.
- A Custom List can be created by toggling each channel on or off with ENTER
button. The channels in the Custom List are displayed in black color, and the
channels deleted from the Custom List are displayed in gray color. Once a
channel is highlighted you can add or delete the channel by referring to the
small window at the top-left corner of the screen.You can create your own
Favorite List. Use the FAV button on the remote control when a channel is
highlighted and then you can add or delete the channel to/from the Favorite
List.
1. Press the MENU button and then use
2. Press the G button and then use
D /E
D /E
button to select the SETUP menu.
button to select Channel Edit.
3. Press the G button. You will now see a screen filled with channel numbers and
a preview picture.
4. Use D / E / F / G button to select a channel and then use the ENTER button to
add or delete it. Press FAV button to add the channel to the Favorite List.
5. Press EXIT button to return to TV viewing or press MENU button to return to the
previous menu.
DTV Signal Strength
- Shows how strong your DTV signal is and whether you need to adjust your antenna or digital cable input.
The higher the signal strength, the less likely you are to experience picture degradation.
- DTV Signal: Only when the input signal is DTV or CADTV, this function is available.
1. Press the MENU button and then use
2. Press the G button and then use
D /E
D /E
button to select the SETUP menu.
button to select DTV Signal.
3. View the on-screen signal strength monitor to see the quality of the signal being
received.
4. Press EXIT button to return to TV viewing or press MENU button to return to the
previous menu.
24 Plasma TV
Operation
Channel Label Setup
- Choose preset labels for your channels.
- If a channel label is provided on the signal from the broadcasting station, the TV displays a short name for a channel even if you didn't preset a label for the channel.
1. Press the MENU button and then use
2. Press the G button and then use
D /E
D /E
button to select the SETUP menu.
button to select Channel Label.
3. Press the G button. You will now see a screen filled with Labels and a preview screen.
4. Use the CH D/E button to select a channel to Label.
5. Use D / E / F / G button to select the appropriate label for the channel, then press ENTER button to set the Label to
the selected channel.
- If you press ENTER button in TV viewing mode, you will see the channel banner.
• For example:
Input Source
- Change the picture source so you can watch your TV, cable TV, VCR, DVD, or any other devices that are connected to your TV.
1. Press the MENU button and then use
2. Press the G button and then use
D /E
D /E
button to select the SETUP menu.
button to select Input Source.
3. Press the G button and then use D / E button to select the source: Antenna,
Cable, Video, Front Video, Component1, Component2, RGB-DTV (or RGB-PC),
HDMI/DVI.
4. Press EXIT button to return to TV viewing or press MENU button to return to the
previous menu.
Note:
• To toggle RGB-DTV and RGB-PC, select RGB-DTV(or RGB-PC) and press G
button.
Input Label
- Sets a label to each input source or lets you skip the input source which is not
in use when you press TV/VIDEO button.
1. Press the MENU button and then use
2. Press the G button and then use
D /E
D /E
button to select the SETUP menu.
button to select Input Label.
3. Press the G button and then use D / E button to select the source: Video, Front
Video, Component1, Component2, RGB, HDMI/DVI.
4. Press the F / G button to select the label.
5. Press EXIT button to return to TV viewing or press MENU button to return to the
previous menu.
Owner’s Manual 25
Operation
V ideo Menu Options
EZ Picture
- EZ Picture adjusts the TV for the best picture appearance. Select the preset value in the EZ Picture menu based on the
program category.
- When adjusting Video menu options (contrast, brightness, color, sharpness, tint, and color temperature) manually, EZ
Picture automatically changes to Custom.
- Daylight, Normal, Night Time, Movie, Video Game, and Sports settings are preset for optimum picture quality at
the factory and are not adjustable.
1. Press the EZ PIC button repeatedly to select the picture appearance setup option as shown below:
Custom (your own settings), Daylight, Normal, Night Time, Movie, Video Game, and Sports.
• You can also use the VIDEO menu to adjust EZ Picture.
2. Press the EXIT button to save and return to TV viewing or press MENU button to return to the previous menu.
Manual Picture Control ( Custom option)
- Adjust the picture appearance to suit your preference and viewing situations.
1. Press the MENU button and then use
D /E
button to select the VIDEO menu.
2. Press the G button and then use D / E button to select the desired picture option
(Contrast, Brightness, Color, Sharpness, or Tint ).
3. Press the G button and then use F
/ G button
to make appropriate adjustments.
4. Press EXIT button to return to TV viewing or press MENU button to return to the
previous menu.
Color Temperature Control
- Choose one of three automatic color adjustments. Set to warm to enhance hotter
colors such as red, or set to cool to see less intense colors with more blue.
1. Press the MENU button and then use
2. Press the
button and then use
D /E
D /E
3. Press the G button and then use D
Warm.
/E
button to select the VIDEO menu.
button to select Color Temperature .
button to select either Cool, Medium or
4. Press EXIT button to return to TV viewing or press MENU button to return to the
previous menu.
V ideo Reset
- Use to quickly reset all the Video menu options to their original factory preset
values.
1. Press the MENU button and then use
2. Press the
button and then use
D /E
D /E
button to select the VIDEO menu.
button to select Video Reset .
3. Press the G button to reset the Video menu options to original values.
26 Plasma TV
Operation
Audio Menu Options
Audio Language
- Other languages may be available if a digital signal is provided by the broadcasting station.
1. Press the MENU button and then use D
2. Press the G button and then use
3. Press the
French.
button to select the AUDIO menu.
button to select Audio Language.
D /E
button and then use
/E
D /E
button to select: English, Spanish, or
4. Press EXIT button to return to TV viewing or press MENU button to return to the
previous menu.
EZ SoundRite
- Scans for changes in sound level during commercials, then adjusts the sound
to match the specified audio level. EZ SoundRite makes sure that the volume
level remains consistent whether you are watching a commercial or a regular
TV program.
1. Press the MENU button and then use D
/E
button to select the AUDIO menu.
2. Press the
button and then use
D /E
button to select EZ SoundRite.
3. Press the
button and then use
D /E
button to select On or Off.
4. Press EXIT button to return to TV viewing or press MENU button to return to the
previous menu.
EZ Sound
- EZ Sound lets you enjoy the best sound without any special adjustment because the TV sets the appropriate sound
options based on the program content.
- When adjusting sound options (treble, bass, and front surround) manually, EZ Sound automatically switches to Custom.
- Normal, Stadium, News, Music, and Theater are preset for good sound quality at the factory and are not adjustable.
1. Press the EZ SOUND button repeatedly to select the appropriate sound setup as shown below:
Custom (your own settings), Normal, Stadium, News, Music, and Theater.
• You can also adjust EZ Sound in the AUDIO menu.
2. Press EXIT button to save and return to TV viewing or press MENU button to return to the previous
menu.
Manual Sound Control ( Custom option)
- Adjust the sound to suit your taste and room situations.
1. Press the MENU button and then use D
/E
button to select the AUDIO menu.
2. Press the G button and then use D
(Balance, Treble, or Bass).
/E
button to select the desired sound option
3. Press the G button and then use F
/G
button to make appropriate adjustments.
4. Press EXIT button to return to TV viewing or press MENU button to return to the
previous menu.
Owner’s Manual 27
Operation
Audio Menu Options
Front Surround
is a trademark of SRS Labs, Inc.
- TruSurround XT technology is incorporated under license from SRS Labs, Inc.
- Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
1. Press the MENU button and then use D
2. Press the
button and then use
D /E
/E
button to select the AUDIO menu.
button to select Front Surround.
3. Press the G button and then use D / E button to select Off, 3D EchoSound
System or SRS (Sound Retrieval System) TruSurround XT..
• 3D EchoSound System
Creates a stunning simulated stereo effects from any mono sound and a
realistic three-dimensional sound with a very wide and deep sound stage
into stereo sound.
• SRS TruSurround XT
Takes advantage of any multi-channel format without needing to add extra
speakers or equipment. Dialog clarity, bass enrichment, and the addition of
stereo audio enhancement that produces an immersive sound experience
from standard stereo material.
4. Press EXIT button to return to TV viewing or press MENU button to return to
the previous menu.
TV Speakers On/Off
On/Off Setup
- Turn TV speakers off if using external audio equipment. Feature turns the TV
Speakers option On or Off.
1. Press the MENU button and then use D
/E
button to select the AUDIO menu.
2. Press the
button and then use
D /E
button to select TV Speaker.
3. Press the
button and then use
D /E
button to select On or Off.
4. Press EXIT button to return to TV viewing or press MENU button to return to the
previous menu.
28 Plasma TV
Operation
BBE
- BBE High Definition Sound restores clarity and presence for better speech
intelligibility and music realism.
1. Press the MENU button and then use D
/E
button to select the AUDIO menu.
2. Press the
button and then use
D /E
button to select BBE.
3. Press the
button and then use
D /E
button to select On or Off.
4. Press EXIT button to return to TV viewing or press MENU button to return to
the previous menu.
•
Manufactured under license from BBE Sound, Inc.
• Treble, Bass or BBE aren’t suitable for SRS TSXT mode.
Stereo/SAP Broadcasts Setup
- This TV can receive MTS stereo programs and any SAP (Secondary Audio Program) that accompanies the stereo program;
if the station transmits an additional sound signal as well as the original one.
- When having selected Stereo or SAP button on the remote control, this TV can only receive the signal when the TV station
transmits the proper signals.
- Mono sound is automatically received if the broadcast is only in Mono; even though Stereo or SAP has been selected.
- Select Mono if you want to listen to mono sound during stereo/SAP broadcasting.
- Stereo or SAP can be received in a Analog channel.
1. Use the SAP button to select your desired MTS mode in a analog signal. Each time you press the SAP button, Mono,
Stereo, or SAP appear in turn.
• If other languages are available on the digital signal, select them with the SAP button.
2. Press EXIT button to save and return to TV viewing.
Owner’s Manual 29
Operation
T ime Menu Options
Auto Clock Setup
- The time is set automatically from a digital channel signal.
- The digital channel signal includes information for the current time provided by the broadcasting station.
- Set the clock manually, if the current time is set incorrectly by the auto clock function.
1. Press the MENU button and then use
D /E
button to select the TIME menu.
2. Press the
button and then use
D /E
button to select Auto Clock.
3. Press the
button and then use
D /E
button to select On or Off.
4. Press the G button and then use D / E button to select your viewing area time
zone: Eastern, Central, Mountain, Pacific, Alaska, or Hawaii.
5. Press EXIT button to return to TV viewing or press MENU button to return to
the previous menu.
Manual Clock Setup
- If current time setting is wrong, reset the clock manually.
- When you set up TV guide on screen system, Manual Clock menu is not
selected.
1. Press the MENU button and then use
2. Press the
button and then use
D /E
D /E
button to select the TIME menu.
button to select Manual Clock.
3. Press the G button and then use F / G button to select either the year, date,
or time option. Once selected, use the D / E button to set the year, date, and
time options.
4. Press EXIT button to return to TV viewing or press MENU button to return to
the previous menu.
On/Off
On/Off Timer Setup
Timer function operates only if the current time has been set.
Off-Timer function overrides On-Timer function if they are both set to the same time.
The TV must be in standby mode for the On-Timer to work.
If you do not press any button within 2 hours after the TV turns on with the On Timer function, the TV will automatically revert to
standby mode.
1. Press the MENU button and then use
2. Press the G button and then use D
D /E
/E
button to select the TIME menu.
button to select Off Timer or On Timer.
3. Press the G button and then use D / E button to select On.
• To cancel On/Off timer function, select Off.
4. Press the
button and then use
D /E
button to set the hour.
5. Press the
button and then use
D /E
button to set the minutes.
6. For only On timer function
Press the G button and then use D
Press the G button and then use D
/E
/E
button to select the channel at turn-on.
button to set the sound level at turn-on.
7. Press EXIT button to return to TV viewing or press MENU button to return to the
previous menu.
30 Plasma TV
Operation
Sleep Timer
- The Sleep Timer turns the TV off at the preset time. Note that this setting is cleared when the TV is turned off.
- You can also set up the Sleep Timer in the TIME menu.
1. Press the TIMER button repeatedly to select the number of minutes. First the Off option appears on the screen,
followed by the following sleep timer options: 10, 20, 30, 60, 90, 120, 180, and 240 minutes.
2. When the number of minutes you want is displayed on the screen, press the ENTER button. The timer begins to
count down from the number of minutes selected.
3. To check the remaining minutes before the TV turns off, press the TIMER button once.
4. To cancel the Sleep Timer, press the TIMER button repeatedly to select Off.
Auto Off
Off
- If set to on and there is no input signal, the TV turns off automatically after 10
minutes.
1. Press the MENU button and then use D / E button to select the TIME menu.
2. Press the G button and then use D / E button to select Auto Off.
3. Press the G button and then use
D /E
button to select On or Off.
4. Press EXIT button to return to TV viewing or press MENU button to return to the
previous menu.
Owner’s Manual 31
Operation
Option Menu Features
Aspect Ratio Control
- Lets you choose the way an analog picture with a 4:3 aspect ratio is displayed on your TV with a 16:9 ratio picture format.
When you receive an analog picture with a 4:3 aspect ratio on your 16:9 TV, you need to specify how the picture is to be displayed.
- If you are viewing a picture with a 16:9 aspect ratio, you can’t use the Horizon aspect ratio option.
- Horizon aspect ratio is not available for Component 1-2(480p/720p/1080i)/RGB-DTV (480p/720p/1080i)/HDMI/DVI-DTV (720p/1080i)
/DTV(720p/1080i) input source.
- In RGB-PC/DVI-PC input source, only use 4:3 or 16:9 aspect ratio are available.
- Note: If a fixed image is displayed on the screen for a long time, it image may become imprinted on the screen and remain visible.
1. Press the RATIO button repeatedly to select the desired picture format.
You can also adjust Aspect Ratio in the OPTION menu.
• Set By Program
Select the proper picture proportion to match the source’s image. (4:3 → 4:3, 16:9 → 16:9)
• 4:3
Choose 4:3 when you want to view a picture with an original 4:3 aspect ratio, with gray bars appearing at both
the left and right sides.
• 16:9
Choose 16:9 when you want to adjust the picture horizontally, in a linear proportion to fill the entire screen.
• Horizon
Choose Horizon when you want to adjust the picture in a non-linear proportion, that is, more enlarged at both
sides, to create a spectacular view.
• Zoom 1
Choose Zoom 1 when you want to view the picture without any alteration. However, the top and bottom portions
of the picture will be cropped.
• Zoom 2
Choose Zoom 2 when you want the picture to be altered, both vertically extended and cropped. The picture taking a halfway trade off between alteration and screen coverage.
• Cinema Zoom
Choose Cinema Zoom when you want to enlarge the picture in correct proportion. Note: When enlarging or
reducing the picture size, the image may become distorted.
You can adjust the enlarge proportion of Cinema Zoom using D / E button. The adjustment range is 1~16.
Cinema 3:2 Mode Setup
- Most movies are 24 frames/sec, but TV signal is 30 frames/sec.
This option lets the TV do 3:2 pull-down operation for you to watch
movies at the best motion appearance.
1. Press the MENU button and then use D
2. Press the G button and then use
3. Press the G button and then use
D /E
D /E
/E
button to select the OPTION menu.
button to select Cinema 3:2 Mode.
button to select On or Off.
4. Press EXIT button to return to TV viewing or press MENU button to return to the
previous menu.
Note: This feature operates only in Component 480i, S-Video, Video mode.
32 Plasma TV
Operation
Caption
1. Press the MENU button and then use D
2. Press the G button and then use
3. Press the G button and then use
D /E
D /E
/E
button to select the OPTION menu.
button to select Caption.
button to select On or Off.
4. Press EXIT button to return to TV viewing or press MENU button to return to the
previous menu.
Caption/Text
Caption/Text
Analog Broadcasting System Captions
Select a caption mode for displaying captioning information if provided on a program.
Analog caption displays information at any position on the screen.
Text displays information, usually at the bottom position and is used for a data service.
Caption/Text, if provided by the broadcaster, would be available for both digital and analog channels on the Antenna/Cable.
This TV is programmed to memorize the caption/text mode which was last set to, when you turn the power off.
1. Use the CC button repeatedly to select Caption CC1, CC2, CC3, CC4, Text1, Text2, Text3, or Text4.
• EZ Mute shows the selected captions option (if available on program) when the TV sound is muted
2. Press EXIT button to save and return to TV viewing.
• You can also use the OPTION menu to select Caption/Text.
1. Press the MENU button and then use D / E button to select the OPTION menu.
2. Press the G button and then use D / E button to select Caption/Text.
3. Press the G button and then use D / E button to select caption: CC1, CC2, CC3,
CC4, Text1, Text2, Text3, or Text4.
• CAPTION
The term for the words that scroll across the bottom of the TV screen; usually
the audio portion of the program provided for the hearing impaired.
• TEXT
The term for the words that appear in a large black frame and almost cover
the entire screen; usually messages provided by the broadcaster.
4. Press EXIT button to return to TV viewing or press MENU button to return to the
previous menu.
Digital Broadcasting System Captions
- Choose the language you want the DTV/CADTV Captions to appear in.
- Languages can be chosen for digital sources only if they are included on the program.
1. Press the MENU button and then use D / E button to select the OPTION menu.
2. Press the G button and then use D / E button to select Caption/Text.
3. Press the G button and then use D / E button to select available caption languages: English, Spanish, or French.
4. Press EXIT button to return to TV viewing or press MENU button to return to the
previous menu.
SETUP
Aspect Ratio
Cinema 3:2 Mode
VIDEO
AUDIO
TIME
Caption
Caption / Text
English
Caption Option
Spanish
Language
French
ISM Method
OPTION
LOCK
Low Power
MENU
Previous
Owner’s Manual 33
Operation
Option Menu Features
Caption Option
- Customize the DTV/CADTV captions that appear on your screen.
1. Press the MENU button and then use D
menu.
/E
button to select the OPTION
2. Press the G button and then use
D /E
button to select Caption Option.
3. Press the G button and then use
F /G
button to select Custom.
4. Use D / E button to customize the Style, Font, etc., to your preference. A preview icon is provided at the bottom of the screen, use it to see the caption
language.
• Size: Set the size of the words.
• Font: Select a typeface for the words.
• Text Color: Choose a color for the text.
• Text Opacity: Specify the opacity for the text color.
• Bg (Background) Color: Select a background color.
• Bg (Background) Opacity: Select the opacity for the background
color.
• Edge Type: Select an edge type.
• Edge Color: Select a color for the edges.
5. Press EXIT button to return to TV viewing or press MENU button to return
to the previous menu.
ISM (Image Sticking Minimization) Method
- A frozen still picture from a PC/video game displayed on the screen for prolonged periods will result in a ghost
image remaining; even though the image is changed. Use our unique method to minimize any fixed image on the
screen.
1. Press the MENU button and then use
menu.
2. Press the
button and then use
D /E
3. Press the G button and then use D
Wash, Orbiter or Inversion.
/E
D / E
button to select the OPTION
button to select ISM Method.
button to select either Normal, White
• Normal
If image sticking is never a problem, ISM is not necessary - set to Normal.
• White wash
White Wash removes permanent images from the screen.
Note: An excessive permanent image may be impossible to clear entirely with
White Wash. To return to normal viewing, press the any button.
• Orbiter
Orbiter may help prevent ghost images. However, it is best not to allow any
fixed image to remain on the screen. To avoid a permanent image on the
screen, the image will move once per 2 minutes: Left → Right → Upside →
Downside → Right → Left → Downside → Upside.
• Inversion
Inversion will automatically invert the plasma display panel color every 30
minutes.
4. Press EXIT button to return to TV viewing or press MENU button to return to
the previous menu.
34 Plasma TV
Operation
Low Power
- Low power reduces the plasma display power consumption.
1. Press the MENU button and then use
menu.
D / E
button to select the OPTION
2. Press the
button and then use
D /E
button to select Low Power.
3. Press the
button and then use
D /E
button to select On or Off.
• When you select On, the screen darkens.
4. Press EXIT button to return to TV viewing or press MENU button to return to
the previous menu.
Owner’s Manual 35
Operation
Lock Menu Options
Parental Control can be used to block specific channels, ratings and other viewing sources.
The Parental Control Function (V-Chip) is used to block program viewing based on the ratings sent by the broadcasting station.
The default setting is to allow all programs to be viewed. Viewing can be blocked by choosing the type of the program and the categories. It is also possible to block all program viewing for a time period. To use this function, the following must be done :
1. Set ratings and categories to be blocked.
2. Specify a password
3. Enable the lock
V-Chip rating and categories
Rating guidelines are provided by broadcasting stations. Most television programs and television movies can be blocked by TV
Rating and/or Individual Categories. Movies that have been shown at the theaters or direct-to-video movies use the Movie Rating
System (MPAA) only.
Ratings for Movies previously shown in theaters:
Movie Ratings :
• Blocking Off
(Permits all programs)
•G
(General audience)
• PG
(Parental guidance suggested)
• PG-13
(Parents strongly cautioned)
•R
(Restricted)
• NC-17
(No one 17 and under admitted)
•X
(Adult only)
If you set PG-13 : G and PG movies will be available , PG-13, R, NC-17 and X will be blocked.
Ratings for Television programs including made-for-TV movies :
• TV-G
• TV-PG
• TV-14
• TV-MA
• TV-Y
• TV-Y7
(General audience)
(Parental guidance suggested)
(Parents strongly cautioned)
(Mature audience only)
(All children)
(Children 7 years older)
TV Rating Children:
• Age
• Fantasy Violence
(applies to TV-Y, TV-Y7)
(applies to TV-Y7)
TV Rating General:
• Age
• Dialogue - sexual dialogue
• Language - adult language
• Sex - sexual situations
• Violence
(applies
(applies
(applies
(applies
(applies
Input Block
• Video, Front Video
• Component 1, 2
• RGB, HDMI/DVI
36 Plasma TV
(On, Off)
(On, Off)
(On, Off)
to TV-G, TV-PG, TV-14, TV-MA)
to TV-PG, TV-14)
to TV-PG, TV-14, TV-MA)
to TV-PG, TV-14, TV-MA)
to TV-PG, TV-14, TV-MA)
Operation
Parental Lock Setup
- Set up blocking schemes to block specific channels, ratings, and external viewing sources.
- A password is required to gain access to this menu.
1. Press the MENU button and then use D
Then, press the G button
/E
button to select the LOCK menu.
• The TV is set up with the initial password “0-0-0-0”.
2. Use the D / E button to choose from the following Lock Menu options. Once the
option is selected, change the settings to your preference.
• Lock System: Enables or disables the blocking scheme you set up previously.
• Set Password: Change the password by inputting a new password twice.
• Block Channel: Blocks any channels that you do not want to watch or
that you do not want your children to watch.
• Movie Rating (MPAA): Blocks movies according to the movie ratings limits specified, so children cannot view certain movies. You can set the ratings limit by blocking out all the movies with the ratings above a specified
level. Keep in mind that the movie ratings limit only applies to movies
shown on TV, not TV programs, such as soap operas.
• TV Rating-Children: Prevents children from watching certain children's TV
programs, according to the ratings limit set. The children rating does not
apply to other TV programs. Unless you block certain TV programs intended for mature audiences in the TV Rating - sub menu, your children can
view those programs.
• TV Rating-General: Based on the ratings, blocks certain TV programs that
you and your family do not want to view.
• Input Block: Enables you to select a source to block from the external
source devices you have hooked up.
3. Press EXIT button to return to TV viewing or press MENU button to return to
the previous menu.
Note:
• If you ever forget your password, key in ‘7’, ‘7’, ‘7’, ‘7’ on the remote control.
Owner’s Manual 37
Operation
Remote Control
EPG (Electronic Program Guide)
(In DTV mode)
- This system has an Electronic Program Guide (EPG) to help your navigation through all the possible viewing options.
- The EPG supplies information such as program listings, start and end times for all available services.
- This function can be used only when the EPG information is broadcasted by broadcasting companies.
- The EPG displays the program description for next 7 days.
- This function is only supported in DTV mode.
1. Press the GUIDE button to switch on EPG.
2. Press the D / E / F / G button to select desired program, then press the ENTER button to display the
selected program.
3. Press the GUIDE or EXIT button again to switch off EPG and return to TV viewing.
38 Plasma TV
Operation
Brief Info.
Brief Info shows the present screen information.
Press the INFO button to show the Brief Info on the screen.
INFO button does not work in Component1, Component2, RGB, and HDMI/DVI modes.
Press the INFO button or EXIT button to exit.
Operation: • Watching TV/DTV/CATV/CADTV
• Watching Video, Front Video
• In Component1, Component2, RGB,
HDMI/DVI modes, INFO button is not
working.
4:3
16 : 9
The original aspect ratio of the video is 4:3
The original aspect ratio of the video is 16:9(wide)
480i
480p
720p
The
The
The
1080i The
Function: • Show the present screen information.
• On Watching with the upper Input signal,
press the INFO button.
• Press the INFO button or EXIT button to
exit.
A: Banner information
B: Program title
C: Day of week, Month, Year
D: Program start time
E: Program progress bar
F: Program finish time
G: Present time
H: Additional information. Refer to the icon
explanation on the right.
CC
video
video
video
video
resolution
resolution
resolution
resolution
is
is
is
is
720x480i
720x480p
1280x720p
1920x1080i
Multilingual : The program contains two or more audio
services. Press the SAP button to select wanted
Audio.
Caption: => The program contains one or more caption services. Press the CC button to select wanted
Closed caption.
The program contains V-Chip information. Refer to the
.
D (Dialogue), L (Language), S (Sex), V (Violence), FV
(Fantasy Violence)
Owner’s Manual 39
Operation
EZ Mute
- Nothing to do with Caption on/Off using MUTE button, the mode selected Caption/Text is to be displayed.
- When you repeatedly press the MUTE button, the sound mode is changed in turn. (Refer to the picture below)
Mute
EZ Mute
EZ Mute : a special mute mode to
activate the closed caption, automatically.
Mute : Sound is muted.
24
Mute Off : Sound is enabled.
Note: EZ Mute does not operate in Component/RGB/HDMI/DVI modes.
Freeze & Magnify (DTV/CADTV 720p, or 1080i mode only)
- Enlarges the picture with correct proportions.
- When enlarging the picture, the image may become distorted.
1. Press the FREEZE button in 720p or 1080i mode.
40 Plasma TV
Note : The Magnify feature is available only in 720p or 1080i mode, but the
FREEZE button works in all video formats.
2. Use the D / E / F / G buttons to select the screen section to be magnified.
3. To return to normal viewing, press the FREEZE button again.
Operation
Screen Setup for PC mode
Operation
• When RGB connect to PC input and select the RGB-PC, this function is used.
• When HDMI/DVI connect to PC input and select HDMI/DVI input, this function is used.
• In RGB-DTV mode, SIZE and PHASE is not available.
Adjustment for screen Position, Size, Phase, Reset
•After connecting RGB-PC or HDMI/DVI to PC input and checking the screen quality.
- Display PC Adjust Menu using ADJUST button.
- Position : Adjust the screen position. After displaying the Adjust, select the screen position.
- Size
: Adjust the screen size.
- Phase
: Adjust the phase of Pixel clock.
In HDMI/DVI-PC mode, PHASE is not available.
- Reset
: Initializating Position, Size, Phase adjustment .
Owner’s Manual 41
Operation
APM (Adaptive Picture Mode)
- Allows a viewer to select their preferred picture mode after compairing the four different picture (Daylight,
-and Custom) settings.
1.
2.
3.
4.
Normal, Night Time
Press the APM button at once. As shown below, the screen is divided to 4-split.
Use the D / E / F / G button to navigate 4 EZ Pictures.
By pressing the ENTER button, you can select the desired mode.
Press EXIT button to return to TV viewing.
Notes:
•While operating the 4-split, any button except APM, ENTER, EXIT, VOLUME D / E , MUTE button on the remote
control are not available.
•If you don't press any button for 30 seconds, APM screen is disappeared, automatically.
42 Plasma TV
External Control Device Setup
External Control Device Setup
- Connect the RS-232C input jack to an external control device (such as a computer or an A/V control system)
and control the Monitor’s functions externally.
- Connect the serial port of the control device to the RS-232C jack on the Monitor back panel.
- RS-232C connection cables are not supplied with the Monitor.
RS-232C Setup
RS-232C INPUT
(CONTROL/SERVICE)
VIDEO
AUDIO
VIDEO
AUDIO
OUTPUT
COMPONENT INPUT 2
COMPONENT2
INPUT
Cable
DIGITAL AUDIO (OPTICAL)
HDMI /DVI
RGB INPUT
AUDIO
INPUT
MONITOR OUTPUT
DVD
/DTV
INPUT
REMOTE
CONTROL
CABL
(MONO)
COMPONENT INPUT 1
DVI
INPUT
A/V INPUT
S-VIDEO
PC
Type of Connector; D-Sub 9-Pin Male
No.
Pin Name
No connection
RXD (Receive data)
TXD (Transmit data)
DTR (DTE side ready)
GND
DSR (DCE side ready)
RTS (Ready to send)
CTS (Clear to send)
No Connection
RS-232C Configurations
3-Wire Configurations
(Not standard)
7-Wire Configurations
(Standard RS-232C cable)
RXD
TXD
GND
DTR
DSR
RTS
CTS
PC
PDP
D-Sub 9
D-Sub 9
TXD
RXD
GND
DSR
DTR
CTS
RTS
RXD
TXD
GND
DTR
DSR
RTS
CTS
PC
PDP
D-Sub 9
D-Sub 9
TXD
RXD
GND
DTR
DSR
RTS
CTS
Owner’s Manual 43
External Control Device Setup
Set ID
Use this function to specify a monitor ID number.
Refer to ‘Real Data Mapping’. See page 45.
1. Press the MENU button and then use
D /E
2. Press the G button and then use
button to select SET ID.
D /E
button to select the SETUP menu.
3. Press the G button and then use D / E button to adjust SET ID to choose the
desired monitor ID number. The adjustment range of SET ID is 1 ~ 99.
4. Press EXIT button to return to TV viewing or press MENU button to return to the
previous menu.
Communication Parameters
• Baud rate : 9600 bps (UART)
• Data length : 8 bits
• Parity : None
• Stop bit : 1 bit
• Communication code : ASCII code
* Use a crossed (reverse) cable.
Transmission / Receiving Protocol
Transmission
[Command1][Command2][ ][Set ID][ ][Data][Cr]
* [Command 1]: First command to control the set.(j,k,m or x)
* [Command 2]: Second command to control the set.
* [Set ID]: You can adjust the set ID to choose desired monitor
ID number in Setup menu. Adjustment range is 1
~ 99. When selecting Set ID ‘0’, every connected
the TV is controlled. Set ID is indicated as decimal
(1~99) on menu and as Hexa decimal (0x0~0x63)
on transmission/receiving protocol.
* [DATA]: To transmit command data.
Transmit ‘FF’ data to read status of command.
* [Cr]: Carriage Return
ASCII code ‘0x0D’
* [ ]: ASCII code ‘space (0x20)’
Command Reference List
COMMAND 1 COMMAND 2
DATA
(Hexadecimal)
01. Power
02. Input Select
03. Aspect Ratio
04. Screen Mute
05. Volume Mute
06. Volume Control
07. Contrast
08. Brightness
09. Color
10. Tint
11. Sharpness
12. OSD Select
13. Remote Control Lock Mode
14. Treble
15. Bass
16. Balance
17. Color Temperature
18. ISM Method
19. Low Power
20. Orbiter Time Setting
21. Orbiter Pixel Setting
COMMAND 1
22. Channel Tuning
23. Channel Add/Del
24. Key
25. Input Select
44 Plasma TV
COMMAND 2
0~1
0~8
0~1
0~2
0 ~ 64
0 ~ 64
0 ~ 64
0 ~ 64
0 ~ 64
0 ~ 64
0~1
0~1
0 ~ 64
0 ~ 64
0 ~ 64
0~2
OK Acknowledgement
[Command2][ ][Set ID][ ][OK][Data][x]
* The Monitor transmits ACK (acknowledgement) based on
this format when receiving normal data. At this time, if the
data is data read mode, it indicates present status data. If
the data is data write mode, it returns the data of the PC
computer.
Error Acknowledgement
[Command2][ ][Set ID][ ][NG][Data][x]
* The Monitor transmits ACK (acknowledgement) based on
this format when receiving abnormal data from non-viable
functions or communication errors.
0~1
1 ~ FE
1 ~3
Data 1: Illegal Code
2: Not supported function
3: Wait more time
DATA 0
DATA 1
(Hexadecimal)
(Hexadecimal)
physical/program high
00 ~ 01
key code
major/program low
DATA 2
DATA 3
DATA 4
(Hexadecimal) (Hexadecimal) (Hexadecimal)
major low
minor high
minor low
DATA 5
(Hexadecimal)
attribute
External Control Device Setup
01. Power (Command2:a)
05. Volume Mute (Command2:e)
G To control Power On/Off of the Monitor.
G To control volume mute on/off.
You can also adjust mute using the MUTE button on
remote control.
Transmission
Transmission
[k][a][ ][Set ID][ ][Data][Cr]
Data 0 : Power Off
1 : Power On
Acknowledgement
[a][ ][Set ID][ ][OK][Data][x]
* In a like manner, if other functions transmit ‘FF’ data
based on this format, Acknowledgement data feedback
presents status about each function.
02. Input Select (Command2:b) (Main Picture Input)
[k][e][ ][Set ID][ ][Data][Cr]
Data 0 : Volume mute off (Volume on)
1 : Volume mute on (Volume off)
2 : EZ Mute
Acknowledgement
[e][ ][Set ID][ ][OK][Data][x]
06. Volume Control (Command2:f)
Transmission
G To adjust volume.
You can also adjust volume with the volume buttons
on remote control.
[k][b][ ][Set ID][ ][Data][Cr]
Transmission
G To select input source for the Monitor.
Data 0: DTV
1: Analog
2: Video
3: Front Video
4: Component 1
5:
6:
7:
8:
Component 2
RGB-DTV
RGB-PC
HDMI/DVI
[k][f][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64
• Refer to ‘Real data mapping’ as shown below.
Acknowledgement
[f][ ][Set ID][ ][OK][Data][x]
Acknowledgement
07. Contrast (Command2:g)
[b][ ][Set ID][ ][OK][Data][x]
G To adjust screen contrast.
You can also adjust contrast in the Video menu.
03. Aspect Ratio (Command2:c) (Main picture format)
Transmission
G To adjust the screen format.
You can also adjust the screen format using the RATIO
button on remote control or in the Option menu.
Transmission
[k][g][ ][Set ID][ ][Data][Cr]
[k][c][ ][Set ID][ ][Data][Cr]
Date 1:
2:
3:
4:
5:
4:3
16:9
Horizon
Zoom 1
Zoom 2
Data Min : 0 ~ Max : 64
• Refer to ‘Real data mapping’ as shown below.
Acknowledgement
[g][ ][Set ID][ ][OK][Data][x]
6: Set by program
10: Cinema Zoom (1)
1F: Cinema Zoom (16)
Acknowledgement
[c][ ][Set ID][ ][OK][Data][x]
04. Screen Mute (Command2:d)
08. Brightness (Command2:h)
G To adjust screen brightness.
You can also adjust brightness in the Video menu.
Transmission
[k][h][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64
• Refer to ‘Real data mapping’ as shown below.
Acknowledgement
[h][ ][Set ID][ ][OK][Data][x]
G To select screen mute on/off.
Transmission
[k][d][ ][Set ID][ ][Data][Cr]
Data 0 : Screen mute off (Picture on)
1 : Screen mute on (Picture off)
Acknowledgement
[d][ ][Set ID][ ][OK][Data][x]
* Real data mapping
0 : Step 0
A : Step 10 (SET ID 10)
F : Step 15 (SET ID 15)
10 : Step 16 (SET ID 16)
63 : Step 99 (SET ID 99)
64 : Step 100
Owner’s Manual 45
External Control Device Setup
09. Color (Command2:i)
13. Remote Control Lock Mode (Command2:m)
G To adjust the screen color.
You can also adjust color in the Video menu.
G To lock the remote control and the front panel controls on
the set.
Transmission
Transmission
[k][i][ ][Set ID][ ][Data][Cr]
[k][m][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64
• Refer to ‘Real data mapping’. See page 45.
Acknowledgement
Data 0: Lock off
1: Lock on
Acknowledgement
[m][ ][Set ID][ ][OK][Data][x]
[i][ ][Set ID][ ][OK][Data][x]
10. Tint (Command2:j)
14. Treble (Command2:r)
G To adjust the screen tint.
You can also adjust tint in the Video menu.
G To adjust treble.
You can also adjust treble in the Audio menu.
Transmission
Transmission
[k][j][ ][Set ID][ ][Data][Cr]
[k][r][ ][Set ID][ ][Data][Cr]
Data Red : 0 ~ Green : 64
• Refer to ‘Real data mapping’. See page 45.
Acknowledgement
Data Min: 0 ~ Max: 64
• Refer to ‘Real data mapping’. See page 45.
Acknowledgement
[ j ][ ][Set ID][ ][OK][Data][x]
[r][ ][Set ID][ ][OK][Data][x]
11. Sharpness (Command2:k)
15. Bass (Command2:s)
G To adjust the screen sharpness.
You can also adjust sharpness in the Video menu.
G To adjust bass.
You can also adjust bass in the Audio menu.
Transmission
Transmission
[k][k][ ][Set ID][ ][Data][Cr]
[k][s][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max: 64
• Refer to ‘Real data mapping’. See page 45.
Acknowledgement
Data Min: 0 ~ Max: 64
• Refer to ‘Real data mapping’. See page 45.
Acknowledgement
[k][ ][Set ID][ ][OK][Data][x]
[s][ ][Set ID][ ][OK][Data][x]
12. OSD Select (Command2:l)
16. Balance (Command2:t)
G To select OSD (On Screen Display) on/off.
G To adjust balance.
You can also adjust balance in the Audio menu.
Transmission
Transmission
[k][l][ ][Set ID][ ][Data][Cr]
Data 0: OSD off
Acknowledgement
[l][ ][Set ID][ ][OK][Data][x]
[k][t][ ][Set ID][ ][Data][Cr]
1: OSD on
Data Min: 0 ~ Max: 64
• Refer to ‘Real data mapping’. See page 45.
Acknowledgement
[t][ ][Set ID][ ][OK][Data][x]
46 Plasma TV
External Control Device Setup
17. Color Temperature (Command2:u)
21. Orbiter Pixel Setting (Command2:s)
G To adjust color temperature.
You can also adjust color temperature in the Video
menu.
G To adjust pixel number in orbiter function.
[ j ][s][ ][Set ID][ ][Data][Cr]
Transmission
[k][u][ ][Set ID][ ][Data][Cr]
Data 0: Medium
Transmission
1: Cool 2: Warm
Acknowledgement
Data Min: 1 ~ Max: 3
Acknowledgement
[s][ ][Set ID][ ][OK][Data][x]
[u][ ][Set ID][ ][OK][Data][x]
22. Tune Command (Command: m a)
18. ISM Method (Command2:p)
G To avoid having a fixed image remain on screen.
Transmission
G To tune channel to following physical/major/minor number
Transmission
[m][a][ ][Set ID][ ][Data0][ ][Data1][ ][Data2][ ][Data3][ ][Data4][ ][Data5][Cr]
[ j ][p][ ][Set ID][ ][Data][Cr]
G To control the Low Power function on/off.
You can also adjust Low Power in Option menu.
Data 0: Physical Channel Number(Transmit by Hexadecimal code)
NTSC air:02~45
NTSC cable: 01, 0E~7D
ATSC air:01~45
ATSC cable:01~87
Data 1,Data 2: Major Channel Number (two part)/ Channel Number (One part)
Data1: High byte
Data2: Low byte
Two part channel number: Major number-Minor number
One part channel number: If the channel band is ATSC
digital cable, it can be used. In case of using one part chan
nel number, minor channel does not need.
Data 3, Data 4: Minor Channel Number(Data 3: High byte)(Data 4: Low byte)
Transmission
Data 5:
Data 1: Inversion
2: Orbiter
4: White Wash
8: Normal
Acknowledgement
[p][ ][Set ID][ ][OK][Data][x]
19. Low Power (Command2:q)
[ j ][q][ ][Set ID][ ][Data][Cr]
Data 0: Low Power off
1: Low Power on
Acknowledgement
[q][ ][Set ID][ ][OK][Data][x]
Main
Two/One
Part
Channel
Two
Sub
One
Main/Sub
Picture
Using
5 Physical Reserv
Channel
ed
Use
1 No Use
Step
1 NTSC Cable
ATSC Air
ATSC
Cable_std
ATSC
Cable_hrc
ATSC
Cable_irc
ATSC
cable_auto
NTSC Air
20. Orbiter Time Setting (Command2:r)
G To adjust orbiter operation time term.
...
Reserved
Reserved
Transmission
[ j ][r][ ][Set ID][ ][Data][Cr]
Data Min: 1 ~ Max: FE
Acknowledgement
[r][ ][Set ID][ ][OK][Data][x]
Owner’s Manual 47
External Control Device Setup
* All data are transmitted by Hexadecimal code
*Two/One part Channel: 6th bit
This bit is used in a cable-ready system.
*Using physical channel: 5th bit
If the channel band is NTSC air or NTSC cable, channel tuning can be done by only physical channel. In this case, using
physical channel bit must be low(0).
But if the channel band is ATSC air or ATSC cable, there are
two cases that physical channel enable or disable.
If the physical channel sending is meaningful, you should set
this bit low(0). If the physical channel sending is meaningless,
you should set this bit high(1).
Example)
1. Analog channel: NTSC cable, channel number(35), main
picture Command: ma 00 23 xx xx xx xx 01 attribute(0x01):
main picture, two part(it’s not mandatory), using physical channel, NTSC cable ‘xx’ data: don’t care major and minor channel
number in case analog channel tuning.
2. Digital channel: ATSC air, channel number(don’t know physical channel, major(30), minor(3)), sub picture
Command: ma 00 xx 00 1E 00 03 A2 attribute(0xA2): sub picture, two part, not using physical channel, ATSC air ‘xx’ data:
don’t care analog channel number in case digital channel tuning.
3. Digital channel: ATSC air, channel
number(physical(20),major(20), minor(3)), sub picture
Command: ma 00 14 00 14 00 03 82 attribute(0x82): sub picture, two part, using physical channel, ATSC air.
25. Input select(Command: x b) (Main Picture Input)
G To select input source for TV.
Transmission
[x][b][][Set ID][][Data][Cr]
Data Structure
INPUT
DATA(Hex)
00
DTV (Antenna)
01
DTV (Cable)
10
Analog (Antenna)
11
Analog (Cable)
20
Video
21
Front Video
40
Component 1
41
Component 2
50
RGB DTV
Acknowledgement
60
RGB PC
[a][ ][Set ID][ ][OK][Data0][Data1][Data2][Data3][Data4][Data5][x]
[a][ ][Set ID][ ][NG][Data0][x]
90
HDMI/DVI
Acknowledgement
23. Channel Add/Del (Command: m b)
G To add and delete the channels
Transmission
[m][b][ ][Set ID][ ][Data][Cr]
Data 0: Channel Delete
1: Channel Add
Acknowledgement
[b][ ][Set ID][ ][OK][Data][x]
[b][ ][Set ID][ ][NG][Data][x]
24. Key (Command: m c)
G To send IR remote key code
Transmission
[m][c][ ][Set ID][ ][Data][ ][Cr]
Data Key code: Refer to page 50.
Acknowledgement
[c][ ][Set ID][ ][OK][Data][x]
48 Plasma TV
[b][ ][Set ID][ ][OK/NG][Data][x]
IR Codes
IR Codes
How to Connect
G Connect your wired remote control to the Remote Control port on the TV.
Remote Control IR Codes
G Output waveform
Single pulse, modulated with 37.917KHz signal at 455KHz
TC
Carrier frequency
FCAR = 1/TC = fOSC/12
Duty ratio = T1/TC = 1/3
T1
G Configuration of frame
• 1st frame
Lead
code
Low
custom code
High
custom code
Data code
Data code
C0 C1 C2 C3 C4 C5 C6 C7 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 D0 D1 D2 D3 D4 D5 D6 D7
• Repeat frame
Repeat code
Tf
G Lead code
9 ms
4.5 ms
0.55 ms
G Repeat code
9 ms
2.25 ms
G Bit description
• Bit “0”
• Bit “1”
0.56 ms
0.56 ms
1.12 ms
2.24 ms
G Frame interval : Tf
The waveform is transmitted as long as a key is depressed.
Tf
Tf
Tf=108ms @455KHz
Owner’s Manual 49
IR Codes
Code (Hexa)
0B
0F
08
C4
C5
79
0E
10 ~ 19
4C
1A
09
65
02
03
00
01
1E
AA
39
40
41
07
06
44
43
52
4D
5B
65
0A
CB
D6
5A
D0
BF
D4
D5
D7
C6
76
77
AF
92
50 Plasma TV
Function
TV/VIDEO
TV INPUT
POWER
POWER ON
POWER OFF
RATIO
TIMER
Number Key 0~ 9
- (Dash)
FLASHBK
MUTE
FREEZE
VOL D
VOLE
CH D
CH E
FAV
INFO
CC
ENTER
MENU
EZ SOUND
EZ PIC
EXIT
FREEZE
SAP
ADJUST
TV
VIDEO
Front Video
COMPONENT 1
COMPONENT 2
RGB-PC
RGB-DTV
HDMI/DVI
Ratio 4:3
Ratio 16:9
Ratio Zoom
APM
Note
R/C Button
R/C Button
R/C Button (Power On/Off)
Discrete IR Code (Only Power On)
Discrete IR Code (Only Power Off)
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
Discrete IR Code (TV Input Selection)
Discrete IR Code (Video Input Selection)
Discrete IR Code (Front Video Input Selection)
Discrete IR Code (Component1 Input Selection)
Discrete IR Code (Component2 Input Selection)
Discrete IR Code (RGB-PC Input Selection)
Discrete IR Code (RGB-DTV Input Selection)
Discrete IR Code (HDMI/DVI Input Selection)
Discrete IR Code (Only 4:3 Mode)
Discrete IR Code (Only 16:9 Mode)
Discrete IR Code (Only Zoom1 Mode)
R/C Button
Programming the Remote
Programming the Remote
G The remote is a multi-brand or a universal remote. It can be programmed to operate most remote-controllable devices of
other manufacturers.
Note that the remote may not control all models of other brands.
Programming a code into a remote mode
1. To find out whether your remote can operate the device without programming, turn on the device such as a VCR and press the
corresponding mode button on the remote.
After that, press the POWER button. If the device is turned off then it responds properly and the remote need not to be programmed. If not, the remote should be programmed to operate the device. The programming procedures are explained below.
2. Press the MENU and MUTE button continuously at the same time for 2 seconds, the current selected device button will be illuminated.
If you don't press any button for 20 seconds, the light on the mode button will be turned off. In that case, you have to repeat from
step 2.
3. Enter code numbers using the number button on the remote by refering the code table on the following pages. When pressing
the button, the light blinks at a time. If the device turned off, the programming is successful.
4. Press the MENU button to store the code. After blinking twice, this code is stored.
5. Test the remote functions to see if the device responds properly. If not, repeat from step 2.
Owner’s Manual 51
Programming Codes
Programming Codes
VCRs
Brand
Codes
Brand
Codes
Brand
Codes
Brand
Codes
AIWA
AKAI
034
016
125
072
031
012
035
028
108
003
031
005
065
112
108
012
034
059
006
029
036
129
003
034
031
107
132
012
004
043
031
031
012
040
043
012
048
130
KENWOOD
014
047
001
101
034
003
017
040
031
067
012
069
101
027
031
003
033
101
045
013
013
049
151
034
024
012
048
043
053
066
133
013
063
031
031
067
101
013
PORTLAND
PULSAR
QUARTZ
QUASAR
RCA
108
072
011
033
013
040
107
145
003
031
053
058
148
014
032
105
113
125
022
003
102
017
131
003
013
031
101
031
024
003
056
077
034
013
031
067
034
010
TATUNG
TEAC
TECHNICS
TEKNIKA
039
034
031
019
101
034
006
008
059
040
040
012
048
012
040
003
031
053
012
034
058
AMPRO
ANAM
AUDIO DYNAMICS
BROKSONIC
CANON
CAPEHART
CRAIG
CURTIS MATHES
DAEWOO
DAYTRON
DBX
DYNATECH
ELECTROHOME
EMERSON
FISHER
FUNAI
GE
GO VIDEO
HARMAN KARDON
HITACHI
INSTANTREPLAY
JCL
JCPENNY
JENSEN
JVC
043 046 124
146
033
023
037
031
103
039 043
129
033
040
033
007
108
116
135
041
010 064
110 111
117 119
023 039 043
053
027
035
101
153
010
LG (GOLDSTAR)
LLOYD
LXI
MAGIN
MAGNAVOX
MARANTZ
MARTA
MATSUI
MEI
MEMOREX
MGA
MINOLTA
MITSUBISHI
017
031
037
131
008
025
034
046
138
009
033
109
136
045
018
063
033
033
013
066
063 072
144 147
MTC
MULTITECH
NEC
026 034
137 150
NORDMENDE
OPTONICA
PANASONIC
PENTAX
015 033
101
031 033 043
050 055 060
150 152
PHILCO
PHILIPS
PILOT
PIONEER
034 039 043
048
012 013 020
106 114 123
009 013 014
034 101 106
033 034 041
068
031 033 067
030
033
010
034
102
046
020
020
051
REALISTIC
RICO
RUNCO
SALORA
SAMSUNG
014 031
053 072
134 139
059
045 046
059 061
040
034
023 039 043
054
070 074 083
140 145
020 031 033
034 067
033 034 054
071 101
021 048
SANSUI
SANYO
SCOTT
SEARS
SHARP
SHINTOM
SONY
SOUNDESIGN
STS
SYLVANIA
SYMPHONIC
TANDY
014
066
020
041
109
147
008
033
054
075
033
062
140
145
034
063
144
010 014
034 040
101
THOMAS
TMK
TOSHIBA
TOTEVISION
UNITECH
VECTOR RESEARCH
040 102 104
107 109 112
115 120 122
043 048 135
007 010 014
134
037 112 129
VICTOR
VIDEO CONCEPTS
VIDEOSONIC
WARDS
YAMAHA
ZENITH
043
039 043
033 070
031 033 034
013 042 047
082 112 131
101
034 046
013
033
054
034
048
072
017
034
131
039
056
080
024
040
043
101
008 009 010
014 017 020
042 073 081
054 149
009 031 052
057 058 076
078 149
033 034 059
034
CATV
CATV
Brand
Codes
Brand
Codes
ABC
003
046
112
014
005
026
092
007
007
065
080
019
023
020
057
032
072
008
052
GOLDEN CHANNEL
HAMLIN
HITACHI
HOSPITALITY
JERROLD
030
049
052
070
002
009
074
001
037
033
010
100
028
015
073
016
044
100
006
AJIN
ANTRONIK
ARCHER
CABLE STAR
CENTURION
CENTURY
CITIZEN
COLOUR VOICE
COMBANO
COMTRONICS
DIAMOND
EAGLE
EASTERN
ELECTRICORD
GE
GEMINI
GI
52 Plasma TV
004 039 042
052 053
007 014 024
090
081
030
030 040
062 066
022 025 054
074
LG (GOLDSTAR)
M-NET
MACOM
MAGNAVOX
MEMOREX
MOVIE TIME
NSC
OAK
PANASONIC
PARAGON
PHILIPS
Brand
050 055
055
077
003 004 008
010 052 069
PIONEER
106 101 005
PULSAR
RCA
REGAL
REGENCY
REMBRANT
SAMSUNG
012 064 079
032
028 038 071
031 037 053
047
012 013 020
POST NEWS WEEK
PRUCER
PTS
SCIENTIFIC ATLANTA
SHERITECH
SIGNAL
SIGNATURE
SL MARX
Codes
Brand
Codes
065
034
076
016
059
011
073
100
047
049
057
025
102
003
043
022
030
052
030
SPRUCER
STARCOM
STARGATE
TADIRAN
TAEKWANG
TAIHAN
TANDY
TEXSCAN
TOCOM
TOSHIBA
UNIKA
UNITED CABLE
UNIVERSAL
047
002
008
030
110
105
017
029
039
100
007
004
005
026
012
087
100
085 090
051 052 063
048 071 072
074
050
107 030 068
011 041 042
045 046
VIEWSTAR
ZENITH
078
004 008 009
030
040 056
014
053
007
027
015
088
114
024
014
032
018
089
060
024
035
086
093
Programming Codes
HDSTB
Brand
Codes
Brand
ALPHASTAR DSR
AMPLICA
BIRDVIEW
CHANNEL MASTER
123
050
051
013
036
008
054
050
005
011
141
024
038
093
097
122
089
114
017
133
GENERAL INSTRUMENT 003
031
HITACHI
139
HOUSTON TRACKER
033
057
HUGHES
068
JANIEL
060
JERROLD
061
KATHREIN
108
LEGEND
057
LG
001
LUTRON
132
LUXOR
062
MACOM
010
065
MEMOREX
057
NEXTWAVE
028
NORSAT
069
CHAPARRAL
CITOH
CURTIS MATHES
DRAKE
DX ANTENNA
ECHOSTAR
ELECTRO HOME
EUROPLUS
FUJITSU
126 129
014 015 018
055
009 012 077
145
006 007 010
052 112 116
046
040
094
098
056
057
095
099
076
058
096
100
021 022 027
Codes
Brand
134
004 016 029
059 101
140
037 039 051
104
147
144
059 063 064
124 125
070
Codes
143
PANASONIC
060
PANSAT
121
PERSONAL CABLE 117
PHILIPS
071
PICO
105
PRESIDENT
019
PRIMESTAR
030
PROSAT
072
RCA
066
REALISTIC
043
SAMSUNG
123
SATELLITE SERVICE CO 028
085
SCIENTIFIC ATLANTA
032
SONY
103
STARCAST
041
SUPER GUIDE
020
TEECOM
023
Brand
PACE SKY SATELLITE
142
TOSHIBA
UNIDEN
102
110 111
VIEWSTAR
WINEGARD
ZENITH
106
074
Codes
088
137
002
016
044
078
101
115
128
081
091
090 107 130
127
025
045
079
135
042 043
048 049
080 086
136
146
082 083 084
120
035 047 057
138
124 125
026 075 087
Audio
Brand
AIWA
Codes
014
125
230
AKAI
163
ANAM
003
059
217
BURMECTER
252
CARVER
086
CLARION
199
DAEWOO
027
102
DENON
015
FANTASIA
071
FINEARTS
022
FISHER
089
LG(GOLDSTAR)
001
087
190
211
HAITAI
034
HARMAN/KARDON 068
INKEL
037
078
122
152
157
189
225
247
028 070 096
129 139 229
014 017 023
106 189 216
235 236
Brand
Codes
JVC
KEC
KENWOOD
004
185
038
170
215
030
045
014
100
175
179
201
214
238
103
111
002
034
097
049
104
107
046
013
048
133
158
007
142
104
KOHEL
NAD
LOTTE
053 060 084
148 198 221
075 130 143
099
021
107
191
212
035
024
108
192
239
188
222
058
079
149
153
158
207
226
062
095
150
154
159
222
227
069
121
151
155
160
224
243
029
110
210
LXI
MAGNAVOX
MARANTZ
MCINTOSH
MCS
MEMOREX
NAD
ONKYO
OPTIMUS
PANASONIC
PENNEY
013
186
050
171
222
046
016
172
176
180
202
219
240
141
187
067 089
197 206
036
173
177
181
208
223
098
174
178
183
213
232
018 020 025
041 081 090
112
Brand
Codes
PHILIPS
PIONEER
026
039
065
115
113
080
092
103
124
193
204
011
019
106
031
072
156
206
005
044
118
012
076
162
166
205
QUASAR
RCA
RCX
REALISTIC
SAMSUNG
SANSUI
SANYO
SCOTT
SHARP
SHERWOOD
SONY
TAEKWANG
040 041 047
056 057 132
140
033 064 113
220 241 251
TEAC
TECHNICS
112
042
091
123
106
145
194
244
135
083
186
032
082
184
209
006
045
126
020
077
163
167
231
143
043 063
093 094
127 250
146
195
245
138
234
Brand
Codes
TOSHIBA
THE
VICTOR
WARDS
YAMAHA
147 218
137
061
088 131
089
054 055 066 092
199
182
203
246
144
051 052
117 119
199 200
158
109
248
073
105
164
168
233
114
249
074
161
165
169
242
010 085 106 136
185 187 237
101 113 128 134
DVD
Brand
Codes
Brand
Codes
Brand
Codes
Brand
Codes
APEX DIGITAL
DENON
GE
HARMAN KARDON
JVC
LG
022
020 014
005 006
027
012
001 010 016 025
MAGNAVOX
MARANTZ
MITSUBISHI
NAD
ONKYO
PANASONIC
013
024
002
023
008 017
003 009
PHILIPS
PIONEER
PROCEED
PROSCAN
RCA
SAMSUNG
013
004
021
005
005
011
SONY
THOMPSON
TOSHIBA
YAMAHA
ZENITH
007
005
019
009
010
026
006
006
015
006
008
018
016 025
Owner’s Manual 53
Troubleshooting Checklist
Troubleshooting Checklist
• Check whether the TV is turned on.
No picture &
No sound
• Is the power cord inserted into wall power outlet?
• Test the wall power outlet, plug another product’s power cord into the outlet
where the TV’s power cord was plugged in.
Picture OK &
No sound
• Press the VOLUME (D
/ E)
button.
• Sound muted? Press MUTE button.
• Check to see if there is any object between the TV and the remote control
causing obstruction.
The remote control
doesn’t work
• Are batteries installed with correct polarity (+ to +, - to -)?
(Refer to p.9)
• Correct remote operating mode set: TV, VCR etc.?
• Install new batteries. (Refer to p.9)
Picture appears slowly
after switching on
• This is normal, the image is muted during the TV startup process. Please
contact your service center, if the picture has not appeared after five minutes.
• Select Color in the Video menu and press the
(Refer to p.26)
No or poor color
or poor picture
button.
• Keep a sufficient distance between the TV and the VCR.
• Activate any function to restore the brightness of the picture.
(If still picture is on the screen for more than 5 minutes, the screen gets dark.)
Horizontal/vertical bars
or picture shaking
• Check for local interference such as an electrical appliance or power tool.
No output from one of
the speakers
• Adjust Balance in the AUDIO menu. (Refer to p.27)
Unusual sound from
inside the TV
• A change in ambient humidity or temperature may result in an unusual noise
when the plasma display is turned on or off and does not indicate a fault with
the TV.
54 Plasma TV
Maintenance
Maintenance
- Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you will have your
new TV. Be sure to turn the power off and unplug the power cord before you begin any cleaning.
Cleaning the Screen
1. Here’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and
a little fabric softener or dish washing detergent. Wring the cloth until it’s almost dry, and then use it to wipe the
screen.
2. Make sure the excess water is off the screen, and then let it air-dry before you turn on your TV.
Cleaning the Cabinet
To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth.
Please be sure not to use a wet cloth.
Extended Absence
If you expect to leave your TV dormant for a long time (such as a vacation), it’s a good idea to unplug
the power cord to protect against possible damage from lightning or power surges.
Owner’s Manual 55
Specification
Product Specifications
MODELS
Z50PX2D
Width (inches / mm)
55 / 1400
Height (inches / mm)
32.3 / 821
Depth (inches / mm)
12.4 / 315
Weight (pounds / kg)
114.8 / 52.05
Resolution
1366 x 768 (Dot)
Power requirement
AC100-240V ~ 50/60Hz
Television System
NTSC-M, ATSC, 64 & 256 QAM
Program Coverage
VHF 2 ~ 13, UHF 14 ~ 69, CATV 1 ~ 135, CADTV 1 ~ 135, DTV 2 ~ 69
External Antenna Impedance
75 Ω
Operating Temperature Range
32 ~ 104°F (0 ~ 40°C)
Operating Humidity Range
Less than 80%
• The specifications shown above may be changed without prior notice for quality improvement.
56 Plasma TV
Notes
Owner’s Manual 57
Notes
58 Plasma TV
ZENITH ELECTRONICS CORPORATION
PLASMA TV Z42PX2D / Z42PX21D LIMITED WARRANTY – USA
Zenith will repair or replace your product, at Zenith’s option, if it proves to be defective in material or workmanship
under normal use, during the warranty period (“Warranty Period”) listed below, effective from the date of original
consumer/end user purchase. This warranty is good only to the original consumer/end user of the product and is
effective only when used in the United States.
WARRANTY PERIOD:
HOW SERVICE IS HANDLED:
LABOR: ONE YEAR from the Date of Purchase.
In Home Service. Please Call the Zenith Interactive
Center at 1-877-9ZENITH (1-877-993-6484) to
schedule a service appointment.
PARTS: ONE YEAR from the Date of Purchase.
Effective Date of Warranty: Your warranty period
Begins on the date of sale to the original
consumer/end user. KEEP THE DEALER’S DATED BILL
OF SALE OR PROOF OF DELIVERY as evidence of the
purchase date. You will be required to submit a legible
copy of your bill of sale or proof of delivery when
requesting warranty service.
Your unit will be repaired or replaced with a new, substitute model or factory reconditioned unit, at Zenith’s
option. If repaired, parts used in the repair may be new
or remanufactured.
Visit our website at http://www.zenithservice.com
Repair Parts and Replacement Units are warranted
for the remaining period of the original warranty.
THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT
LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. TO THE
EXTENT ANY IMPLIED WARRANTY IS REQUIRED BY LAW, IT IS LIMITED IN DURATION TO THE EXPRESS
WARRANTY PERIOD ABOVE. ZENITH WILL NOT BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL,
INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY NATURE, INCLUDING, WITHOUT LIMITATION, LOST
PROFITS, LOST OR CORRUPTED PROGRAMMING OR DATA, OR ANY OTHER DAMAGE WHETHER BASED IN
CONTRACT, TORT, OR OTHERWISE. Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above exclusion or limitation may not
apply to you. This warranty gives you specific legal rights and you may also have other rights that vary from stat
to state.
THIS LIMITED WARRANTY DOES NOT APPLY TO:
●
●
●
●
●
●
●
●
damage caused in shipping or transit
service required as a result of improper installation,
including incorrect or insufficient AC supply (please
consult the owner’s manual for power supply
requirements)
installation or repair of antenna systems, cable converters, cable company supplied equipment, or
other components in a video system
set-up or adjustment on consumer controls, or
damage caused by improper adjustments
damage caused by other system components
any unit that has been modified or incorporated
into any other product
replacement of batteries on the remote control.
damage (including cosmetic damage), failure, loss
●
●
●
●
●
or personal injury due to misuse, abuse, negligence, improper maintenance or storage, or to acts
of nature or other causes beyond Zenith’s control.
(Causes beyond Zenith’s control include but are not
limited to lightning strike, power surges, power outages and water damage.)
Image burn-in
repair or replacement of warranted parts by other
than Zenith Authorized Service Centers.
units purchased or serviced outside of the U.S.A.
product where the original factory serial numbers
have been removed, defaced or changed in any
way.
product sold and labeled as “as is, where is” or similar disclaimer.
The costs of repair or replacement under these excluded circumstances shall be borne by the consumer.
CONCERNING PIXEL FUNCTIONALITY: Your Plasma Television contains about one million individual pixels.
Plasma TVs typically contain a small number of pixels that do not function normally. Your display has been inspected and is in compliance with manufacturer’s specifications, indicating that any pixel defects do not affect the operation or use of your display.
CUSTOMER INTER-ACTIVE CENTER NUMBERS:
To obtain customer assistance, product information, or Dealer or Service
locations
Call 1-877-9Zenith (1-877-993-6484) (24 hours a day,
365 days per year) and select appropriate options from the
menu.
Or visit our website at http://www.zenithservice.com
BEFORE CALLING FOR SERVICE:
Please check your operating guide – you may avoid a service call.
● Please have your product model number, serial number and the date of purchase or the date of original installation available.
● If a replacement unit is required, under some circumstances you may be asked to provide a reserve deposit to
Zenith against a credit card number as surety for advanced shipment. Your credit card will not be charged if
you return the defective unit within 10 working days.
● If a replacement unit is received, please use the carton and packaging from that unit in returning the defective
unit to Zenith.
● Parts and service in accordance with the Zenith warranty are Zenith’s responsibility and will be provided without
charge. Other service requirements will be at the owner’s expense. If you have problems in obtaining satisfactory warranty service, write or call the Zenith Customer Interactive Center. Service may be provided by independently owned and operated service organizations.
● To assure proper credit and avoid unnecessary charges, you must obtain a Return Authorization before returning any product for Zenith Warranty Service. Contact the number below or your authorized Zenith repair facility
for details.
●
IMPORTANT: Please fill out and mail your Product Registration Card or go to www.zenithservice.com to register
your product online. This information allows Zenith to reach you promptly should we discover a safety or reliability problem that could affect you.
TO CONTACT ZENITH BY MAIL:
LG Customer Interactive Center
201 James Record Road
Huntsville, Alabama 35824
http://www.zenithservice.com
P/N : 3828VA0528M

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Page Count                      : 60
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:c1a17e43-3cf4-4d7c-965a-798ce3637afa
Producer                        : Acrobat Distiller 4.0 for Macintosh
Modify Date                     : 2005:05:26 13:27:06+09:00
Create Date                     : 1990:05:25 09:22:20Z
Creator Tool                    : QuarkXPressª3.3E: LaserWriter 8 Z1-8.7.1
Metadata Date                   : 2005:05:26 13:27:06+09:00
Document ID                     : uuid:34b6dff8-aed4-49d6-91bc-04ddcf08a4b5
Format                          : application/pdf
Title                           : 528Men
Creator                         : PSY
Author                          : PSY

EXIF Metadata provided by EXIF.tools