LG Electronics USA 52LB9DFUA LCD TV MONITOR User Manual User s Manual H ok

LG Electronics USA LCD TV MONITOR User s Manual H ok

USERS MANUAL

EUT Type: LCD TV/Monitor FCC ID: BEJ52LB9DFUA Test Report No.: GETEC-E3-07-067 FCC Class B Certification APPENDIX H : USER’S MANUAL
Please read this manual carefully before operatingyour set. Retain it for future reference.Record model number and serial number of the set. See the label attached on the back cover and quote this information to your dealer when you require service.LCD TVOWNER’S MANUALLCD TV MODELS42LBX47LBX52LBXwww.lgusa.com / www.lg.caAs an ENERGY STARPartner LGE U. S. A.,Inc.has determined that thisproduct meets theENERGY STAR guidelinesfor energy efficiency.ENERGY STAR is a set of power-savingguidelines issued by the U.S.Environmental Protection Agency(EPA).
WARNING / CAUTION1WARNING / CAUTIONTo prevent fire or shock hazards, do not exposethis product to rain or moisture.FCC NOTICEClass B digital deviceThis equipment has been tested and found to com-ply with the limits for a Class B digital device, pur-suant to Part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection againstharmful interference in a residential installation. Thisequipment generates, uses and can radiate radio fre-quency energy and, if not installed and used inaccordance with the instructions, may cause harmfulinterference to radio communications. However,there is no guarantee that interference will notoccur in a particular installation. If this equipmentdoes cause harmful interference to radio or televi-sion reception, which can be determined by turningthe equipment off and on, the user is encouraged totry to correct the interference by one or more ofthe following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipmentand receiver.- Connect the equipment to an outlet on a circuitdifferent from that to which the receiver is con-nected.- Consult the dealer or an experienced radio/TVtechnician for help.Any changes or modifications not expresslyapproved by the party responsible for compliancecould void the user’s authority to operate theequipment. CAUTIONDo not attempt to modify this product in any waywithout written authorization from LG Electronics.Unauthorized modification could void the user’sauthority to operate this product The lightning flash with arrowheadsymbol, within an equilateral triangle,is intended to alert the user to thepresence of uninsulated “dangerous voltage”within the product’s enclosure that may be ofsufficient magnitude to constitute a risk of elec-tric shock to persons.The exclamation point within an equi-lateral triangle is intended to alert theuser to the presence of importantoperating and maintenance (servicing) instruc-tions in the literature accompanying the appliance.TO REDUCE THE RISK OF ELECTRIC SHOCKDO NOT REMOVE COVER (OR BACK). NOUSER SERVICEABLE PARTS INSIDE. REFER TOQUALIFIED SERVICE PERSONNEL.WARNING/CAUTIONTO REDUCE THE RISK OF FIRE AND ELECTRICSHOCK, DO NOT EXPOSE THIS PRODUCT TORAIN OR MOISTURE.NOTE TO CABLE/TV INSTALLERThis reminder is provided to call the CATV systeminstaller’s attention to Article 820-40 of the NationalElectric Code (U.S.A.). The code provides guidelines forproper grounding and, in particular, specifies that thecable ground shall be connected to the grounding systemof the building, as close to the point of the cable entryas practical.
IMPORTANT SAFETY INSTRUCTIONSSAFETY INSTRUCTIONS2Important safety instructions shall be provided with each apparatus. This information shall be given in a separatebooklet or sheet, or be located before any operating instructions in an instruction for installation for use andsupplied with the apparatus. This information shall be given in a language acceptable to the country where the apparatus is intended to be used. The important safety instructions shall be entitled “Important Safety Instructions”. The following safetyinstructions shall be included where applicable, and, when used, shall be verbatim as follows. Additional safetyinformation may be included by adding statements after the end of the following safety instruction list. At themanufacturer’s option, a picture or drawing that illustrates the intent of a specific safety instruction may beplaced immediately adjacent to that safety instruction:Read these instructions.Keep these instructions.Heed all warnings.Follow all instructions.Do not use this apparatus near water.Clean only with dry cloth.Do not block any ventilation openings. Install inaccordance with the manufacturer’s instructions.Do not install near any heat sources such asradiators, heat registers, stoves, or other apparatus(including amplifiers)that produce heat.Do not defeat the safety purpose of the polarizedor grounding-type plug. A polarized plug hastwo blades with one wider than the other. Agrounding type plug has two blades and a thirdgrounding prong, The wide blade or the thirdprong are provided for your safety. If the providedplug does not fit into your outlet, consult anelectrician for replacement of the obsolete outlet.Protect the power cord from being walked onor pinched particularly at plugs, conveniencereceptacles, and the point where they exit fromthe apparatus.Only use attachments/accessories specified bythe manufacturer.Unplug this apparatus when unused for longperiods of time.Owner ManualOwner ManualOwner ManualOwner ManualOwner ManualOwner ManualOwner ManualOwner ManualOwner ManualOwner ManualOwner ManualOwner ManualOwner ManualOwner ManualOwner Manual12345678Owner ManualOwner Manual
3Use only with the cart, stand, tripod, bracket,or table specified by the manufacturer, or soldwith the apparatus. When a cart is used, usecaution when moving the cart/apparatuscombination to avoid injury from tip-over.Never touch this apparatus or antenna duringa thunder or lighting storm. Do not allow a impact shock or any objects tofall into the product, and do not drop onto thescreen with something.Refer all servicing to qualified service personnel.Servicing is required when the apparatus hasbeen damaged in any way, such as power-supplycord or plug is damaged, liquid has beenspilled or objects have fallen into the apparatus,the apparatus has exposed to rain or moisture,does not operate normally, or has beendropped.CAUTION concerning the Power Cord :Most appliances recommend they be placedupon a dedicated circuit; that is, a single outletcircuit which powers only that appliance andhas no additional outlets or branch circuits.Check the specification page of this owner'smanual to be certain.Do not overload wall outlets. Overloaded walloutlets, loose or damaged wall outlets, extensioncords, frayed power cords, or damaged orcracked wire insulation are dangerous. Any ofthese conditions could result in electric shockor fire. Periodically examine the cord of yourappliance, and if its appearance indicates dam-age or deterioration, unplug it, discontinue useof the appliance, and have the cord replacedwith an exact replacement part by an authorizedservicer. Protect the power cord from physicalor mechanical abuse, such as being twisted,kinked, pinched, closed in a door, or walkedupon. Pay particular attention to plugs, walloutlets, and the point where the cord exits theappliance.Outdoor use marking :WARNING - To reduce the risk of fire or elec-tric shock, do not expose this appliance to rainor moisture.Wet Location Marking : Apparatus shall not beexposed to dripping or splashing and noobjects filled with liquids, such as vases, shallbe placed on or over apparatus.GGRROOUUNNDDIINNGGEnsure that you connect the earth ground wireto prevent possible electric shock. If groundingmethods are not possible, have a qualifiedelectrician install a separate circuit breaker. Do not try to ground the unit by connecting itto telephone wires, lightening rods, or gas pipes.DDIISSCCOONNNNEECCTTIINNGG DDEEVVIICCEE FFRROOMM MMAAIINNSSMains plug is the disconnecting device. Theplug must remain readily operable.Owner ManualOwner ManualOwner ManualOwner ManualOwner ManualOwner ManualOwner ManualOwner ManualOwner ManualOwner ManualOwner ManualOwner Manual91210111314151617Power SupplyShort-circuitBreaker
4CONTENTSWARNING / CAUTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . 2FEATURE OF THIS TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6PREPARATIONAccessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7Front Panel Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8Back Panel Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Attaching the TV to a Wall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Back Cover for Wire Arrangement . . . . . . . . . . . . . . . . . . . . . 11Desktop Pedestal Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12VESA Wall Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12Antenna or Cable Connection . . . . . . . . . . . . . . . . . . . . . . . . . . 13EXTERNAL EQUIPMENT SETUPHD Receiver Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14DVD Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17VCR Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19PC Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21Other A/V Source Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26USB In Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26Audio Out Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27WATCHING TV / CHANNEL CONTROLRemote Control Key Functions . . . . . . . . . . . . . . . . . . . . . . . . . 28Turning On TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30Channel Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30Volume Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30On-Screen Menus Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31Channel Setup - Auto Scan (Auto Tuning) . . . . . . . . . . . . . . . . . . . . . . . . . . . 32- Add / Delete Channel (Manual Tuning) . . . . . . 33- Channel Editing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34Input List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 SimpLink . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36Input Label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Entry Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39Photo List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40Music List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44PICTURE CONTROLPicture Size (Aspect Ratio) Control . . . . . . . . . . . . . . . . . . 46Preset Picture Settings- Picture Mode - Preset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47- Color Tone - Preset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48Manual Picture Adjustment- Picture Mode - User Mode . . . . . . . . . . . . . . . . . . . . . . . . 49- Color Tone - User Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . 50XD - Picture Improvement Technology . . . . . . . . . . . . . 51Advanced - Cinema 3:2 Pulldown Mode . . . . . . . . . . . 52Advanced - Black (Darkness) Level . . . . . . . . . . . . . . . . . . . 53Advanced - TruM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54TruM Demo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55Picture Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56SOUND & LANGUAGE CONTROLAuto Volume Leveller (Auto Volume) . . . . . . . . . . . . . . . . 57Preset Sound Setting (Sound Mode) . . . . . . . . . . . . . . . . 58Sound Setting Adjustment - User Mode . . . . . . . . . . . 59Balance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60Stereo/SAP Broadcasts Setup . . . . . . . . . . . . . . . . . . . . . . . . . . 61TV Speakers On/Off Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62Audio Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63On-Screen Menus Language Selection . . . . . . . . . . . . . 64Caption Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65- Analog Broadcasting System Captions . . . . . . . 66- Digital Broadcasting System Captions . . . . . . . . 67- Caption Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68MEDIAMEDIAMEDIAHOST HOST HOST MEDIAHOST
5TIME SETTINGClock Setting- Auto Clock Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69- Manual Clock Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70Auto On/Off Timer Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71Sleep Timer Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72Auto Shut-off Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73PARENTAL CONTROL / RATINGSSet Password & Lock System . . . . . . . . . . . . . . . . . . . . . . . . . . . 74Channel Blocking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76Movie & TV Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77External Input Blocking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80Key Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80APPENDIXTroubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83Product Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84Programming the Remote Control . . . . . . . . . . . . . . . . . . . 85IR Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .89External Control Through RS-232C . . . . . . . . . . . . . . . . . .91
PREPARATIONFEATURES OF THIS TV6■ If the TV feels cold to the touch, there may be a small “flicker” when it is turned on. This is normal, there is noth-ing wrong with TV.■ Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots. However, theyhave no adverse effect on the monitor's performance.■ Avoid touching the LCD screen or holding your finger(s) against it for long periods of time. Doing so may pro-duce some temporary distortion effects on the screen.OOnn DDiissppoossaall a. The fluorescent lamp used in this product contains a small amount of mercury.b. Do not dispose of this product with general household waste.c. Disposal of this product must be carried out in accordance to the regulations of your local authority.is a trademark of SRS Labs, Inc.TruSurround XT technology is incorporated underlicense from SRS Labs, Inc.LG TV with this logo displays Full HD(high-defini-tion) 1080p native resolution by receiving and pro-cessing a Full HD 1080p signal.LG TV with this logo can play MP3 music from aMP3 player, such as iPOD, and JPEG images from adigital camera through the USB device.With HDMI CEC support of LG’s audio/video deviceconnected to the HDMI (high-definition multimediainterface), LG TV with this logo works easily with oneremote control. It has three HDMI ports that connect audio andvideo devices with one cable and produces the high-est quality digital images and sound.?RTruSurround XTManufactured under license from Dolby Laboratories.“Dolby“and the double-D symbol are trademarks ofDolby Laboratories. High-definition television. High-resolution digitaltelevision broadcast and playback system composedof roughly a million or more pixels, 16:9 aspect-ratioscreens, and AC3 digital audio. A subset of digitaltelevision, HDTV formats include 1080i and 720presolutions.LG's own special digital image generator, consistingof a full digital image processor, six different mainpicture quality factors.??RTruSurround XT
PREPARATIONACCESSORIES7Owner's Manual1.5V 1.5VOwner’s ManualBatteries75ohm Round CableRemote ControlCable Management2- TV Bracket Bolts 2- TV Brackets,2- Wall BracketsEnsure that the following accessories are included with your plasma display. If an accessory is missing, pleasecontact the dealer where you purchased the product.User must use shielded signal interface cables (D-sub 15 pin cable) with ferrite cores to maintain standardcompliance for the product.APM CCAUTO DEMOM/C EJECTTV INPUTTV INPUTSTBSTBMENUBRIGHT +BRIGHT -TIMERRATIOSIMPLINKBACKBACK■Slightly wipe stained spot on the exterior only with the polishingcloth for the product exterior if there is stain or fingerprint onsurface of the exterior.■Do not wipe roughly when removing stain. Please be cautions ofthat excessive power may cause scratch or discoloration.Polishing ClothOOppttiioonn EExxttrraassD-sub 15 pin CablePower CordCD ManualLCD TV PLASMA TVOwner's Manualhttp://www.lgusa.comwww.lg.caCopyright© 2007 LGE,All Rights Reserved.PREPARATIONTwist HolderArrange the wires with thetwist holder.
PREPARATIONFRONT PANEL INFORMATIONPREPARATION8CHVOLCH VOLENTERMENU INPUT/ICHVOLCHANNEL(DD,EE) ButtonsVOLUME(FF,GG) ButtonsENTER ButtonMENU ButtonINPUT ButtonPOWER ButtonRemote Control SensorIntelligent EyeAdjusts picture according tothe surrounding conditions.Power/Standby Indicator• Illuminates red in standby mode.• Illuminates green when the set is switched on.■Here shown may be somewhat different from your TV.■NOTE: If your product has a protection tape attached, remove the tape.And then wipe the product with a cloth (If a polishing cloth is included with your product, use it).
PREPARATIONBACK PANEL INFORMATION9■Here shown may be somewhat different from your TV.AV IN 2L/MONORAUDIOAVIDEOS-VIDEOUSB INUSB Input port10AV IN 2L/MONORAUDIOVIDEOS-VIDEOUSB INRGB/DVI ANTENNA/ANTENNA/CABLE INABLE IN132459876HDMI/DVI INConnect a HDMI signal to 1, 2 or 3.Or DVI (VIDEO)signal to the 1, 2 or 3 port with aDVI to HDMI cable.COMPONENT INConnect a component video/audio device to thesejacks.RGB(PC)AUDIO (RGB/DVI)Connect the monitor output from a PC to theappropriate input port.RS-232C IN (CONTROL & SERVICE) PORTConnect to the RS-232C port on a PC.REMOTE CONTROL PORTConnect your wired remote control.AV (Audio/Video) IN 1 Connect audio/video output from an externaldevice to these jacks.S-VIDEOConnect S-Video out from an S-VIDEO device.AUDIO OUTConnect analog audio to various types of equipment.DIGITAL AUDIO OUTConnect digital audio to various types of equipment. Note: In standby mode, these ports do not work.ANTENNA/CABLE INConnect over-the air signals to this jack.Connect cable signals to this jack.Power Cord SocketFor operation with AC power. Caution: Never attempt to operate the TV on DC power.176892345106
PREPARATIONATTACHING THE TV TO A WALLPREPARATION10We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards. Additionally, we recommend that the TV be attached to a wall so it cannot be pulled in a forward direction,potentially causing injury or damaging the product. Caution: Please make sure that children don’t climb on or hang from the TV. ■Insert the eye-bolts (or TV brackets and bolts) to tighten the product to the wall as shown in the picture.*Insert the eye-bolts and tighten them securely in the upper holes.Secure the wall brackets with the bolts (not provided as parts of the product, must purchase separately ) tothe wall. Match the height of the bracket that is mounted on the wall to the holes in the product.Ensure the eye-bolts or brackets are tightened securely.■Use a sturdy rope (not provided as parts of the product, must purchaseseparately) to tie the product. It is safer to tie the rope so it becomes horizontalbetween the wall and the product.■Here shown may be somewhat different from your TV.
PREPARATIONBACK COVER FOR WIRE ARRANGEMENT11■Here shown may be somewhat different from your TV.Connect the cables as necessary.To connect an additional equipment, see theEExxtteerrnnaall eeqquuiippmmeennttCCoonnnneeccttiioonnss section.Install the CCAABBLLEE MMAANNAAGGEEMMEENNTTas shown.(Insert it as pushing the loops on the bothsides of the cable management.)Bundle the cables using the supplied twistholder.Hold the CCAABBLLEE MMAANNAAGGEEMMEENNTTwith bothhands and pull it out.(Pull it out as holding the loops on the both sides ofthe cable management.)NOTEGG Do not hold the CABLE MANAGEMENT when moving the product.- If the product is dropped, you may be injured or the product may be broken.How to remove the cable managementCABLE MANAGEMENT123
PREPARATIONDESKTOP PEDESTAL INSTALLATIONPREPARATION12For proper ventilation, allow a clearance of 4inches on all four sides from the wall.VESA WALL MOUNTINGThis product accepts a VESA-compliant mounting interface pad. (optional)There 4 threaded holes are available for attaching the bracket.GGScrew length needed depends on the wall mount used. For further information, refer to the VESAWall Mounting Instruction Guide.NOTE4 inches4 inches4 inches4 inches400mm600mm
PREPARATIONANTENNA OR CABLE CONNECTION131. Antenna (analog or digital)Wall Antenna Socket or Outdoor Antenna without a Cable BoxConnections. For optimum picture quality, adjust antenna direc-tion if needed.2. CableANTENNA/CABLE INANTENNA/CABLE INWall Antenna SocketOutdoorAntenna(VHF, UHF)Cable TVWall JackMulti-family Dwellings/Apartments(Connect to wall antenna socket)RF Coaxial Wire (75 ohm)RF Coaxial Wire (75 ohm)Single-family Dwellings /Houses(Connect to wall jack for outdoor antenna)Be careful not to bend the bronze wirewhen connecting the antenna.Copper WireThe TV will let you know when the analog, cable, and digital channel scans are complete.NOTEANTENNA/CABLE IN■To improve the picture quality in a poor signal area, please purchase a signal amplifier and install properly. ■If the antenna needs to be split for two TV’s, install a 2-Way Signal Splitter.■If the antenna is not installed properly, contact your dealer for assistance.AntennaUHFSignalAmplifierVHF3. Using both cable and antennaCable TVWall JackAntennaRF Coaxial Wire (75 ohm)RF Coaxial Wire (75 ohm)Diplexer(SignalCombinner)ANTENNA/CABLE IN
EXTERNAL EQUIPMENT SETUP14HD RECEIVER SETUPEXTERNAL EQUIPMENT SETUPThis TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if youdo receive digital signals from a digital set-top box or other digital external device, refer to the figure asshown below.This TV supports HDCP (High-bandwidth Digital Contents Protection)protocol for Digital Contents.(DVI)Y L RPBPR(DVI)RGBWhen connecting Component cable1. How to connectConnect the video outputs (Y, PB, PR)of the digital set top box to the CCOOMMPPOONNEENNTT IINN VVIIDDEEOO 11jacks on the set. Match the jack colors (Y = green, PB= blue, and PR= red).Connect the audio output of the digital set-top box to the CCOOMMPPOONNEENNTT IINN AAUUDDIIOO 11jacks on the set.2. How to use■Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.)■Select CCoommppoonneenntt 11input source with using the IINNPPUUTTbutton on the remote control.■If connected to CCOOMMPPOONNEENNTT IINN 22input, selectCCoommppoonneenntt 22input source.Signal Component 1/2YesYesYesYesYesHDMI/DVI1, 2 or 3NoYesYesYesYes2112480i480p720p1080 i1080 pSupported Display Specifications (Y, CB /PB,CR /PR)Horizontal Vertical Frequency(KHz)Frequency(Hz)15.73 60.0015.73 59.9431.47 59.9431.47 60.0045.00 60.0044.96 59.9433.75 60.0033.72 59.9467.50 60.0067.432 59.93927.00 24.0026.97 23.9433.75 30.0033.71 29.97Resolution 1280x7201920x1080720x480
15EXTERNAL EQUIPMENT SETUP(DVI)(DVI)VI)HDMI-DTV OUTPUTRGBWhen connecting HDMI cableConnect the digital set-top box to HHDDMMII//DDVVII IINN11,22 or 33 jack on the set.No separated audio connection is necessary.1. How to connect2. How to use■Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.)■Select HHDDMMII11,HHDDMMII22 or HHDDMMII33input source with usingthe IINNPPUUTTbutton on the remote control.■If the digital set-top box player does not support Auto HDMI,you need to set the output resolution appropriately.211Supported Display Specifications (HDMI-DTV)Horizontal Vertical Frequency(KHz)Frequency(Hz)31.47 60.0031.47 59.9445.00 60.0044.96 59.9433.75 60.0033.72 59.9467.50 60.0067.432 59.93927.00 24.0026.97 23.9433.75 30.0033.71 29.97Resolution 720x4801280x7201920x1080
EXTERNAL EQUIPMENT SETUPEXTERNAL EQUIPMENT SETUP16When connecting HDMI to DVI cableL RDVI-DTV OUTPUTRGBRGB3Connect the DVI output of the digital set-top box to the HHDDMMII//DDVVII IINN11, 22 or 33 jack on the set.Connect the audio output of the digital set-top box to the AAUUDDIIOO((RRGGBB//DDVVII))jack on the set.1. How to connect■Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.)■Select HHDDMMII11,HHDDMMII22 or HHDDMMII33input source with using the IINNPPUUTTbutton on the remote control.2. How to use2112
EXTERNAL EQUIPMENT SETUPDVD SETUP17Component Input portsTo get better picture quality, connect a DVD player to the component input ports as shown below.Component ports on the TVYPBPRVideo output ports on DVD playerYYYYPBPbB-YCbPRPrR-YCrY L RPBPRWhen connecting Component cableConnect the video outputs (Y, PB, PR)of the DVD to the CCOOMMPPOONNEENNTT IINN VVIIDDEEOO11jacks on the set.Match the jack colors (Y = green, PB= blue, and PR= red).Connect the audio outputs of the DVD to the CCOOMMPPOONNEENNTT IINN AAUUDDIIOO11jacks on the set.1. How to connect2. How to use■Turn on the DVD player, insert a DVD.■Select CCoommppoonneenntt 11input source with using the IINNPPUUTTbutton on the remote control.■If connected to CCOOMMPPOONNEENNTT IINN 22input, selectCCoommppoonneenntt 22input source.■Refer to the DVD player's manual for operating instruc-tions.211 2
EXTERNAL EQUIPMENT SETUPEXTERNAL EQUIPMENT SETUP18When connecting with an S-Video cableHDMI-DVD OUTPUTL RS-VIDEOAUDIOConnect the S-VIDEO output of the DVD to the SS--VVIIDDEEOOinput on the set.Connect the audio outputs of the DVD to the AAUUDDIIOOinput jacks on the set.1. How to connect2. How to use■Turn on the DVD player, insert a DVD.■Select AAVV11input source with using the IINNPPUUTTbutton onthe remote control.■If connected to AAVV IINN 22, select AAVV22input source.■Refer to the DVD player's manual for operating instructions.When connecting HDMI cableConnect the HDMI output of the DVD to the HHDDMMII//DDVVII IINN11, 22 or 33jack on the set.No separated audio connection is necessary.1. How to connect2. How to use■Select HHDDMMII11,HHDDMMII22 or HHDDMMII33input source with usingthe IINNPPUUTTbutton on the remote control.■Refer to the DVD player's manual for operating instruc-tions.■If the DVD does not support Auto HDMI, you need to setthe output resolution appropriately. 2121EXTERNAL EQUIPMENT SETUP1 21
EXTERNAL EQUIPMENT SETUPVCR SETUP19When connecting with an antenna■To avoid picture noise (interference), leave an adequate distance between the VCR and TV■If the 4:3 picture format is used; the fixed images on the sides of the screen may remain visible on the screen.L RS-VIDEO VIDEOOUTPUTSWITCHANT INANT OUTANTENNA/ANTENNA/CABLE INCABLE INWall JackAntennaConnect the RF antenna out socket of the VCR to the AAnntteennnnaasocket on the set.Connect the antenna cable to the RF antenna in socket of the VCR.1. How to connect■Set VCR output switch to 3 or 4 and then tune TV to the same channel number.■Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.)2. How to use2112
EXTERNAL EQUIPMENT SETUPEXTERNAL EQUIPMENT SETUP20In the event that you connectboth Video and the S-Videocables, only the S-Video will work.CAUTIONL R S-VIDEOVIDEOOUTPUTSWITCHANT INANT OUTANTENNA/CABLE INL RS-VIDEO VIDEOOUTPUTSWITCHANT INANT OUTANTENNA/CABLE INConnect the AAUUDDIIOO/VVIIDDEEOOjacks between TV and VCR. Match the jack colors(Video = yellow, Audio Left = white,and Audio Right = red)1. How to connect2. How to use■Insert a video tape into the VCR and press PLAY on theVCR. (Refer to the VCR owner’s manual.)■Select AAVV11input source with using the IINNPPUUTTbutton onthe remote control.■If connected to AAVV IINN 22, select AAVV22input source. If you have a mono VCR, con-nect the audio cable from theVCR to the AAUUDDIIOOLL//MMOONNOOjack of the set.NOTEWhen connecting with an S-Video cableWhen connecting with a RCA cableConnect the S-VIDEO output of the VCR to the SS--VVIIDDEEOOinput on the set. The picture quality isimproved; compared to normal composite (RCA cable)input.Connect the audio outputs of the VCR to the AAUUDDIIOOinput jacks on the set.1. How to connect2. How to use■Insert a video tape into the VCR and press PLAY on the VCR.(Refer to the VCR owner’s manual.)■Select AAVV11input source with using the IINNPPUUTTbutton on theremote control.■If connected to AAVV IINN 22, select AAVV22input source.121112
EXTERNAL EQUIPMENT SETUPPC SETUP21This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. GGCheck the image on your TV. There may be noise associatedwith the resolution, vertical pattern, contrast or brightness inPC mode. If noise is present, change the PC output to anotherresolution, change the refresh rate to another rate or adjustthe brightness and contrast on the VIDEO menu until thepicture is clear. If the refresh rate of the PC graphic card cannot be changed, change the PC graphic card or consult themanufacturer of the PC graphic card.NOTERGBRGBRGB OUTPUT AUDIORGBWhen connecting D-sub 15 pin cable Connect the RGB output of the PC to the RRGGBB ((PPCC)) jack on the set.Connect the PC audio output to the AAUUDDIIOO ((RRGGBB//DDVVII))jack on the set.1. How to connect2. How to use■Turn on the PC and the set.■Select RRGGBB--PPCCinput source with using the IINNPPUUTTbuttonon the remote control.211 2
22EXTERNAL EQUIPMENT SETUPEXTERNAL EQUIPMENT SETUPGGIf the PC has a DVI output and no HDMI output, a separated audio connection is necessary.GGIf the PC does not support Auto DVI, you need to set the output resolution appropriately. To get thebest picture quality, adjust the output resolution of PC graphics card's output resolution to 1920x1080,60Hz.NOTERGBDVI-PC OUTPUT AUDIORGBRGBConnect the DVI output of the PC to the HHDDMMII//DDVVII IINN11, 22 or 33 jack on the set.(Use the HDMI to DVI cable)Connect the PC audio output to the AAUUDDIIOO((RRGGBB//DDVVII))jack on the set.1. How to connect■Turn on the PC and the set■Select HHDDMMII11,HHDDMMII22 or HHDDMMII33input source with using the IINNPPUUTTbutton on the remote control.2. How to use2112When connecting HDMI to DVI cable
EXTERNAL EQUIPMENT SETUP23GGDepending on the graphics card, DOS mode maynot work if a HDMI to DVI Cable is in use.GGCheck the image on your TV. There may be noiseassociated with the resolution, vertical pattern,contrast or brightness in PC mode. If noise ispresent, change the PC output to another resolu-tion, change the refresh rate to another rate oradjust the brightness and contrast on the PIC-TURE menu until the picture is clear. If the refreshrate of the PC graphic card can not be changed,change the PC graphic card or consult the manu-facturer of the PC graphic card.GGAvoid keeping a fixed image on the screen for along period of time. The fixed image may becomepermanently imprinted on the screen.GGThe synchronization input form for Horizontal andVertical frequencies is separate.NOTESSupported Display Specifications (RGB/HDMI-PC)Horizontal Vertical Frequency(KHz)Frequency(Hz)31.468 70.0931.469 70.0831.469 59.9437.861 72.8037.500 75.0035.156 56.2537.879 60.3148.077 72.1846.875 75.0048.363 60.0056.476 70.0660.023 75.0247.776 59.87060.289 74.89347.712 60.01563.981 60.02079.976 75.02575.00 60.0067.50 60.00Resolution 720x4001360x768640x350* RGB-PC mode only: 1280x768(H-60.289, V-74.893)640x480800x6001024x7681280x10241600x12001920x10801280x7681280x768
EXTERNAL EQUIPMENT SETUPEXTERNAL EQUIPMENT SETUP24Screen Setup for PC modeOverviewWhen the RGB input, of the set is connected to a PC Output, SelectRGB-PC with using the IINNPPUUTTbutton on the remote control.When you change the resolution, select the proper resolution inpresent input to see the best picture appearance.Picture ModeColor TemperatureXD Advanced Aspect RatioPicture ResetScreen GTruM DemoSelection ( Gor ) leads you to the screen adjustment menu.Picture Mode : User1Color Temperature : CoolXDAdvancedAspect Ratio : 16:9Picture ResetScreenTruM DemoPress the MMEENNUUbutton and then use DDor EEbuttonto select the PPIICCTTUURREEmenu.Press the GG button and then use DDor EEbutton toselect SSccrreeeenn. Press the GG button to enter the screen adjustmentmenu.231
25EXTERNAL EQUIPMENT SETUPResolutionPosition GGSizePhaseResetMove PrevResolutionPosition SizePhaseReset GGInitialize Settings.Yes NoPrev Select OKRReessoolluuttiioonn XGA (1024, 1280, 1360) isn’t distinguished because of havingthe same H/V Sync Time.This function is you to select theDefault Sync Time.PPoossiittiioonnThis function is to adjust pictureto left/right and up/down as youprefer. SSiizzeeThis function is to minimize anyvertical bars or stripes visible onthe screen background. And thehorizontal screen size will alsochange. PPhhaasseeThis function allows you toremove any horizontal noise andclear or sharpen the image of char-acters.Use DDor EEbutton to select RReessoolluuttiioonn, PPoossiittiioonn, SSiizzee,or PPhhaassee.Press the EENNTTEERRbutton and then use DD / EEor FF / GGbutton to make appropriate adjustments.■The PPhhaasseeadjustment range is --1166~++1166.■The SSiizzeeadjustment range is --3300~++3300.Press the EENNTTEERRbutton.Adjustment for screen Resolution, Position, Size, Phase, ResetUse DDor EEbutton to select RReesseett.Press the EENNTTEERR button and then use FFor GGbutton to select YYeess.Press the EENNTTEERRbutton.Initializing (Reset to original factory values)231231To initialize the adjusted values.
EXTERNAL EQUIPMENT SETUPOTHER A/V SOURCE SETUPEXTERNAL EQUIPMENT SETUP26CamcorderVideo Game SetConnect the AAUUDDIIOO/VVIIDDEEOOjacksbetween TV and external equipment.Match the jack colors.(Video = yellow, Audio Left = white, andAudio Right = red)1. How to connect2. How to use■Select AAVV22input source with using theIINNPPUUTTbutton on the remote control.■If connected to AAVV IINN 11input, select AAVV11input source.■Operate the corresponding external equipment.1AV IN 2L/MONORAUDIOAVIDEOS-VIDEOUSB INL RVIDEO1The TV has a special signal output capability which allows you to hook up the second TV or monitor.AV IN 2V IN 2L/L/MONOMONORAUDIOAUDIOVIDEOVIDEOS-VIDEOUSB INUSB INAV IN 2L/MONORAUDIOVIDEOUSB INConnect the USB device to the UUSSBB IINN jacks on theside of TV. 1. How to connect12. How to use■After connecting the UUSSBB IINN jacks, you use thefunction. (GGpp..3399)MEDIAMEDIAHOST HOST MEDIAMEDIAHOST HOST 1orUSB IN SETUP
EXTERNAL EQUIPMENT SETUPAUDIO OUT SETUP27Send the TV’s audio to external audio equipment via the Audio Output port.GGWhen connecting with external audio equipment, such asamplifers or speakers, please turn the TV speakers off.(GGpp..6622)NOTEGGDo not look into the optical output port. Looking at thelaser beam may damage your vision.GGBlock the SPDIF out(optical/coaxial) about the contentswith ACP(Audio Copy Protection) function.CAUTIONConnect one end of the optical or coaxial cable to theTV’s OOPPTTIICCAALL or CCOOAAXXIIAALL port of DDIIGGIITTAALL AAUUDDIIOOOOUUTT.Connect the other end of the optical or coaxial cableto the digital audio input on the audio equipment.Set the “TV Speaker option - Off” in the AUDIO menu.(GGpp..6622). See the external audio equipment instructionmanual for operation.1. How to connect23112L R S-VIDEOAnalogDigitalConnect audio outputs to the TV’s AAUUDDIIOO OOUUTTjacks.Set the “TV Speaker option - Off” in the AUDIO menu.(GGpp..6622). See the external audio equipment instructionmanual for operation.211
WATCHING TV / CHANNEL CONTROLREMOTE CONTROL FUNCTIONSWATCHING TV /CHANNEL CONTROL28APM CCAUTO DEMOM/C EJECTTV INPUTTV INPUTSTBSTBMENUBRIGHT +BRIGHT -TIMERRATIOSIMPLINKBACKBACKTV INPUTSTBBACKTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTBRIGHT +/-THUMBSTICK(Up/Down/LeftRight/ENTER)EXITTIMERRATIOSIMPLINKVOLUME UP/DOWNMUTEFAVCHANNELUP/DOWNBACK— (DASH)■Controls the mode. ■Control video cassette recorders or DVD players.Displays the main menu.■Adjust brightness on screen.■It turns to the default settings brightness by changingmode source.■Navigate the on-screen menus and adjust the systemsettings to your preference.Clear all on-screen displays and return to TV viewing fromany menu.Select the amount of time before your TV turns off auto-matically.GGpp..7722Change the aspect ratio.GGpp..4466See a list of AV devices connected to TV.When you toggle this button, the SimpLink menu appearsat the screen.Increase/decrease the sound level.Switch the sound on or off. pp..3300Scroll through the programmed Favorite channels. pp..3344Select available channels.Tune to the last channel viewed.Used to enter a program number for multiple program channels such as 2-1, 2-2, etc.MEDIAMEDIAHOST HOST MEDIAMEDIAHOST HOST mode controlbuttonsMEDIAMEDIAMEDIAHOST HOST HOST MEDIAHOST NUMBER buttonVCR/DVD buttonsMENUWhen using the remote control, aim it at the remote control sensor on the TV.
29WATCHING TV / CHANNEL CONTROLTV INPUTSTBBACKTV INPUTSTBBACKTV INPUTSTBBACKBACKPICTUREPICTURESOUNDSOUNDSAPSAPCCCCMARKMARKUSB EJECTUSB EJECTMEDIA HOSTMEDIA HOSTMEDIA HOSTTurns your TV or any other programmed equipment on or off, depending on the mode.In AV 1-2, Component 1-2, RGB-PC, HDMI1, HDMI2 and HDMI3 input sources, screen returns tothe last TV channel.External input modes rotate in regular sequence: Antenna, Cable, AV1-2, Component 1-2, RGB-PC,HDMI1, HDMI2, HDMI3 (Antenna, Cable, AV 1-2, Component 1-2, RGB-PC, HDMI1, HDMI2,HDMI3 input sources are linked automatically, only if these are connected ).Select the remote operating mode: TV, DVD, VCR, AUDIO, CABLE or STB. * If the mode of another product is selected, a button on the remote control which is not usedfor the selected product can control the TV.Enter to the mode.MEDIAMEDIAHOST HOST MEDIAMEDIAHOST HOST Inside the Sliding CoverPICTURESOUNDSAPCCMARKUSB EJECTAdjust the factory preset picture dependon the viewing environment.GGpp.. 4477Select the appropriate type of sound fortype of program.GGpp.. 5588Select MTS sound: Mono, Stereo, and SAPanalog mode. Change the audio languageDTV mode. GGpp.. 6611Select the Caption On/Off. GGpp..6655Enter the selected functions. GGpp..4411Remove the USB device. GGpp..3399Installing Batteries■Open the battery compartment cover on theback side and install the batteries matching cor-rect polarity (+with +,-with -).■Install two 1.5V AA batteries. Don’t mix old orused batteries with new ones.■Close cover.■Use a remote control up to 7 meters distance and 30degree (left/right) within the receiving unit scope.■Dispose of used batteries in a recycle bin to pre-serve environment.Remote control effective rangePOWERTV INPUTINPUTMODEMEDIAMEDIAMEDIAHOST HOST HOST MEDIAHOST RMODEDAY -DAY +LIVE TV INPUT
WATCHING TV / CHANNEL CONTROLTURNING ON TVWATCHING TV /CHANNEL CONTROL30TV INPUTSTBPICTUREPICTUREPICTURE SOUNDSOUNDSAPSAPCCCCMARK USB EJECTBACKBACKTV INPUTSTBBACKPICTURESAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPMARK USB EJECTTV INPUTSTBBACKSOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTTV INPUTTV INPUTSTBPICTURE SOUNDSAPCCMARK USB EJECTINPUTBACKMEDIA HOSTTV INPUTSTBTIMERRATIOSIMPPICTUREPICTUREPICTURE SOUNDSOUNDSAPSAPCCCCMARKMARK USB EJECTUSB EJECTBACKBACKMEDIA HOSTNOTEGGIf you intend to be away on vacation, disconnect the power plug from the wall power outlet.First, connect power cord correctly. At this moment, the TV switches tostandby mode.■In standby mode, press the (or ON/OFF), IINNPPUUTT,CCHH ((DD or EE))button on the TV or press the PPOOWWEERR, IINNPPUUTT, TTVV IINNPPUUTT, CCHH((DD orEE)), NNuummbbeerr ((00~99))button on the remote control.Select the viewing source by using the IINNPPUUTTbutton on the remote control.■This TV is programmed to remember which mode it was last set to, evenif you turn the TV off.When finished using the TV, press the PPOOWWEERRbutton on the remote con-trol. The TV reverts to standby mode.123Press the CCHH((DDor EE))or NNUUMMBBEERRbuttons to select a channel number.1VOLUME ADJUSTMENTCHANNEL SELECTIONPress the VVOOLL((DDor EE))button to adjust the volume.If you want to switch the sound off, press the MMUUTTEEbutton. You can cancel the Mute function by pressing the MMUUTTEEor VVOOLL((DDor EE))button.Adjust the volume to suit your personal preference.123TV INPUTSTBPICTURE SOUNDSAPCCMARK USB EJECTBACKTV INPUTSTBTIMERRATIOSIMPLINKBACKBACKPICTURESAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPMARK USB EJECTTV INPUTSTBBACKSOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOST
WATCHING TV / CHANNEL CONTROLON-SCREEN MENUS SELECTION31Press the MMEENNUUbutton and then use DDor EEbutton to select each menu.Press the GG button and then use DDEE FFGG button to display the available menus.Your TV's OSD (On Screen Display)may differ slightly from what is shown in this manual.SETUP PICTURETIMEAuto TuningManual TuningChannel Edit21AUDIOPicture Mode : User1Color Temperature : CoolXDAdvancedAspect Ratio : 16:9Picture ResetScreenTruM DemoSound Mode : StandardAuto Volume : OnBalance : 0TV Speaker : OnClock : Oct 19, 2006, 03:44 AMOff Time : OffOn Time : OffSleep Time : OffAuto Sleep : OffLanguage : EnglishInput LabelSimpLink : OffKey Lock : OffCaption : OffSet ID : 1Lock System : OffSet PasswordBlock ChannelMovie RatingTV Rating-ChildrenTV Rating-GeneralInput BlockOPTIONLOCKLock System : OffSet PasswordBlock ChannelTV Rating-EnglishTV Rating-FrenchInput BlockFor USA For Canada
WATCHING TV / CHANNEL CONTROLCHANNEL SETUPWATCHING TV /CHANNEL CONTROL32Auto Tuning GManual TuningChannel EditSelection ( Gor ) leads you tothe Auto Tuning screen.TV INPUTSTBPICTURE SOUNDSAPCCMARK USB EJECTBACKTV INPUTSTBBACKPICTURESAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDCCMARK USB EJECTTV INPUTTV INPUTSTBSTBBRIGHT +BRIGHT -TIMERRATIOSIMPLINKBACKPICTURE SOUNDSAPMARK USB EJECTMENUTV INPUTSTBBACKSOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTPress the MMEENNUUbutton and then use DDor EEbuttonto select the SSEETTUUPPmenu.Press the GG button and then use DDor EEbutton toselect AAuuttoo TTuunniinngg.Press the EENNTTEERRbutton to begin the channel search.Allow AAuuttoo TTuunniinnggto complete the channel searchcycle for AANNTTEENNNNAAand CCAABBLLEE.Automatically finds all channels available through antennaor cable inputs, and stores them in memory on the channellist. Run Auto Tuning again after any Antenna/Cable connectionchanges. A password is required to gain access to Auto Tuning menuif the Lock System is turned on.Auto TuningManual TuningChannel EditSelection ( Gor ) leadsyou to the Auto Tuningscreen.231NOTEAnalog TV antenna Digital DTV antennaAnalog CATV cable Digital CADTV cableProcessing Auto Tuning...DTV Ch.23Found Channel(s): 16Press to stop the currentscan and start ANALOG ANTENNA channel scan.MENU PrevNextAuto TuningManual TuningChannel EditAuto Scan (Auto Tuning)
WATCHING TV / CHANNEL CONTROL33Auto TuningManual Tuning GChannel EditA password is required to gain access to Manual Tuningmenu if the Lock System is turned on.If selecting DTV or CADTV input signal, you can view theon-screen signal strength monitor to see the quality of thesignal being received.Press the MMEENNUUbutton and then use DDor EEbuttonto select the SSEETTUUPPmenu.Press the GG button and then use DDor EEbutton toselect MMaannuuaall TTuunniinngg.Press the GG button and then use DDor EEbutton toselect DTV, TV, CADTV, and CATV.Press the GG button and then use DDor EEbutton toselect channel number you want to add or delete.Press the EENNTTEERRbutton to add or delete for thechannel number.Press EEXXIITTbutton to return to TV viewing or pressMMEENNUUbutton to return to the previous menu.TV INPUTSTBPICTURE SOUNDSAPCCMARK USB EJECTBACKTV INPUTSTBBACKPICTURESAPCCMARK USB EJECTTV INPUTTV INPUTSTBSTBBRIGHT +BRIGHT -TIMERRATIOSIMPLINKBACKPICTURE SOUNDCCMARK USB EJECTMENUTV INPUTSTBBACKPICTURE SOUNDSAPMARK USB EJECTTV INPUTSTBBACKSOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTSelect channel type and RF-channel number.DTV 2456231Auto TuningManual TuningChannel EditSelect channel type and RF-channel number.DTV GG12Press to delete the channel.DTV 12-0DDEEBad Normal GoodAuto TuningManual TuningChannel EditAdd/Delete Channel (Manual Tuning)NOTEGGThis digital channel number is a physical channelnumber, which is different from the normal channelnumber shown in Channel Edit.
WATCHING TV / CHANNEL CONTROLWATCHING TV /CHANNEL CONTROL34Press the MMEENNUUbutton and then use DDor EEbuttonto select the SSEETTUUPPmenu.Press the GG button and then use DDor EEbutton toselect CChhaannnneell EEddiitt.Press the GG button. You will now see a screen filledwith channel numbers and a preview picture. Use DDEE FFGG button to select a channel and thenuse the EENNTTEERRbutton to add or delete it. Press FFAAVVbutton to add the channel to the Favorite List. Thesurfing icon will appear in front of that channel number.Press EEXXIITTbutton to return to TV viewing or pressMMEENNUUbutton to return to the previous menu.TV INPUTSTBPICTURE SOUNDSAPCCMARK USB EJECTBACKTV INPUTSTBBACKPICTURESAPCCMARK USB EJECTTV INPUTTV INPUTSTBSTBBRIGHT +BRIGHT -TIMERRATIOSIMPLINKBACKPICTURE SOUNDCCMARK USB EJECTMENUTV INPUTSTBBACKPICTURE SOUNDSAPMARK USB EJECTTV INPUTSTBBACKSOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTFrom the default channel list created from the Auto Tuningchannel search, you can create two different types of chan-nel lists in memory: “custom list” and “favorite channellist”. A custom list can be created by toggling each channel onor off with ENTER button. The channels in the Custom Listare displayed in black and the channels deleted from theCustom List are displayed in gray. Once a channel is high-lighted you can add or delete the channel by referring tothe small window at the top-left corner of the screen.You can create your own Favorite List. Use the FFAAVVbuttonon the remote control when a channel is highlighted andthen add or delete the channel to/from your Favorite List.Auto TuningManual TuningChannel Edit GSelection ( Gor ) leads you to thechannel edit screen.45231Auto TuningManual TuningChannel EditChannel Editing
WATCHING TV / CHANNEL CONTROLINPUT LIST35AAnntteennnnaa: Select it when watching the DTV/TV.CCaabbllee: Select it when watching the CADTV/CATV.AAVV 11,, AAVV 22: Select it when watching the VCR or external equipment.CCoommppoonneenntt 11--22: Select it when using the DVD or the Digital set-top box depend on connector.RRGGBB--PPCC: Select it when using PC depend on connector.HHDDMMII,, HHDDMMII22,, HHDDMMII33: Select it when using DVD, PC or Digital set-top box depend on connector.AntennaCableAV 1AV 2Component1EEInput ListAV 2Press theIINNPPUUTTbutton to display external device that is con-nected to the unit, on screen.Press the EENNTTEERRbutton to change the input to the activeexternal device. Use the DDor EE button to select the inputsource.TV INPUTSTBSTBMENUBRIGHT +BRIGHT -TIMERRATIOSIMPLINKPICTURE SOUNDSAPCCMARK USB EJECTINPUTMEDIA HOSTMEDIA HOSTAAnntteennnnaaCCaabblleeIf all external input sources are connected: If no external input sources are not connected:If there is any external input source connected:(ex: When connected only to AV 2)AAnntteennnnaaCCaabblleeAAVV11AAnntteennnnaaCCaabblleeAAVV22AAVV22CCoommppoonneenntt11HHDDMMII22HHDDMMII11RRGGBB--PPCCCCoommppoonneenntt22231HHDDMMII33
WATCHING TV / CHANNEL CONTROLWATCHING TV /CHANNEL CONTROL36WATCHING TV /CHANNEL CONTROLThis operates only for the devices with the logo. Please check the logo.This allows you to control and play other AV devicesconnected to the display through HDMI cable without addi-tional cables and settings.TV INPUTTV INPUTSTBSTBMENUBRIGHT +BRIGHT -TIMERRATIOSIMPLINKBACKPICTURE SOUNDSAPCCMARK USB EJECTMEDIA HOSTMEDIA HOSTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTMEDIA HOSTMENUConnect the HDMI/DVI IN 1, 2 or 3 terminal of theTV to the rear terminal (HDMI output) of theSimpLink device with the HDMI cable. After connecting the HDMI jack for the home theaterwith simpLink function in the above method, connectthe DIGITAL AUDIO OUT OPTICAL on the back ofthe TV to the DIGITAL AUDIO OUT terminal on theback of the simpLink device with the Optical cable. Press the MMEENNUUbutton and then use DDor EEbuttonto select the OOPPTTIIOONNmenu.Press the GG button and then use DDor EEbutton toselect SSiimmppLLiinnkk.Press the GG button and then use DDor EEbutton toselect OOnn.Press EEXXIITTbutton to return to TV viewing or pressMMEENNUUbutton to return to the previous menu.4231Language : EnglishInput labelSimpLink : OffKey Lock : OffCaption : OffSet ID : 1LanguageInput labelSimpLink GKey LockCaptionSet IDOffOnNOTEGGWhen operating the external device with SimpLink, press the TV button among the MODE button onthe remote control. GGWhen you switch the Input source with the INPUT button on the remote control, you can stop theoperation of device worked by SimpLink. GGWhen you select or operate the media device with home theater function, the speaker automaticallyswitches to home theater speaker (HT speaker). GGWhen you execute ‘Photo List, Music List ’function during DVD playback included in home theater sup-ported the SimpLink stops and the applicable function is executed after switching the input to TV.SimpLink Preparations5
WATCHING TV / CHANNEL CONTROLSimpLink Functions37DDiirreecctt PPllaayy After connecting AV devices to TV, you can directly control the devices and play mediawithout additional settings.SSeelleecctt AAVV ddeevviiccee Enables you to select one of AV devices connected to TV and play it.DDiisscc ppllaayybbaacckkControl connected AV devices by pressing the , , , , , , ,DDEEFF GG, EENNTTEERRbuttons and buttons for play, pause, stop, fast reverse, fast forward,chapter skip.PPoowweerr ooffff aallll ddeevviicceess When you power off TV, all connected devices are turned off.SSwwiittcchh aauuddiioo--oouutt Offers an easy way to switch audio-out.(A device, which is connected to TV through HDMI cable but does not support Simplink, does not provide this function)SimpLink Menu DDIISSCC ppllaayybbaacckk: Select and play discs.When multiple discs are available, thetitles of the discs are conveniently dis-played at the bottom of the screen.VVCCRR ppllaayybbaacckk: Play and control theconnected VCR.HHDDDD RReeccoorrddiinnggss ppllaayybbaacckk: Play andcontrol recordings stored in HDD.AAuuddiioo OOuutt ttoo HHTT ssppeeaakkeerr//AAuuddiiooOOuutt ttoo TTVV: Select HT speaker or TVspeaker for Audio Out.TTVV vviieewwiinngg : Switch to the previous TVchannel regardless of the current mode.GGSelected DeviceGGWhen no device is connected (displayed in gray)GGWhen a device isconnected (displayed in bright color)12345TV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTMEDIA HOSTTV INPUTTV INPUTSTBSTBMENUBRIGHT +BRIGHT -TIMERRATIOSIMPLINKBACKPICTURE SOUNDSAPCCMARK USB EJECTMEDIA HOSTMEDIA HOSTSIMPLINKSIMPLINKAfter selecting the TTVVbutton of the MODE on the remote control,press the SSIIMMPPLLIINNKKbutton.Use DDEE FFGG button to select the desired device and then pressthe EENNTTEERRbutton.Control connected AV devices by pressing the , , ,,,,, DDEEFF GG, EENNTTEERRbuttons.21312345
WATCHING TV / CHANNEL CONTROLINPUT LABELWATCHING TV /CHANNEL CONTROL38WATCHING TV /CHANNEL CONTROLSets a label to each input source which is not in use whenyou press INPUT button.Press the MMEENNUUbutton and then use DDor EEbutton toselect the OOPPTTIIOONNmenu.Press the GG button and then use DDor EEbutton toselect IInnppuutt LLaabbeell.Press the GG button and then use DDor EEbutton toselect the source: AV1, AV2, Component1,Component2, RGB-PC, HDMI1, HDMI2 or HDMI3.Press the FFor GGbutton to select the label.Press EEXXIITTbutton to return to TV viewing or pressMMEENNUUbutton to return to the previous menu.TV INPUTSTBPICTURE SOUNDSAPCCMARK USB EJECTBACKTV INPUTSTBBACKPICTURESAPCCMARK USB EJECTTV INPUTTV INPUTSTBSTBBRIGHT +BRIGHT -TIMERRATIOSIMPLINKBACKPICTURE SOUNDCCMARK USB EJECTMENUTV INPUTSTBBACKPICTURE SOUNDSAPMARK USB EJECTTV INPUTSTBBACKSOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTLanguageInput label GSimpLinkKey LockCaptionSet IDAV1 Cable BoxAV2 VCRComponent1 DVDComponent2 Set Top BoxRGB-PC VCRHDMI1 GameHDMI2 SatelliteHDMI3 Cable Box23415Language : EnglishInput labelSimpLink : OffKey Lock : OffCaption : OffSet ID : 1
MEDIA HOST39ENTRY MODESMEDIAMEDIAMEDIAHOST HOST HOST MEDIAHOST When you connect a USB device or press the button, this screen isdisplayed, automatically.In USB device, you can not add a new folder or delete the existing folder.MEDIA HOSTMEDIA HOSTPress the DD or EEbutton to select the desired item.Press the EENNTTEERRbutton to move to PPhhoottoo LLiisstt or MMuussiicc LLiisstt ofUSB device.Press the UUSSBB EEJJEECCTTbutton of remote control before removingthe USB device.12NOTE3BACKBACKPICTUREPICTURE SOUNDSOUNDSAPSAPMARKMARKUSB EJECTUSB EJECTCCCC[Media Host Menu]Press the UUSSBB EEJJEECCTTbutton of remote control before removing the USB device.Only a USB storage device is recognizable. If the USB storage device is connected through a USB hub, the device is not recognizable.A USB storage device using an automatic recognition program may not be recognized.A USB storage device which uses its own driver may not be recognized.In case of a card reader, up to four memory cards are concurrently recognizable.The recognition speed of a USB storage device may depend on each device.Please do not turn off the TV or unplug the USB device when the connected USB storagedevice is working. When such device is suddenly separated or unplugged, the stored files orthe USB storage device may be damaged. To unplug the USB storage device, please press theUUSSBB EEJJEECCTTbutton on the remote control, and then unplug it safely.Please do not connect the USB storage device which was artificially maneuvered on the PC.The device may cause the product to malfunction or fail to be played. Never forget to use onlya USB storage device which has normal music files or image files.Please use only a USB storage device which was formatted as a FAT or a NTFS file system pro-vided with the Windows operating system. In case of a storage device formatted as a differentutility program which is not supported by Windows, it may not be recognized.In case of a hard disk drive (HDD) formatted as NTFS, writing and deletion are not allowable.Please connect power to a USB storage device which requires an external power supply. If not,the device may not be recognized.Please connect a USB storage device with cable is offered by USB maker. If connected withcable is not offered by USB maker or an excessively long cable, the device may not be recog-nized.Some USB storage devices may not be supported or operated smoothly.If the name of a folder or file is too long, it will not be displayed or recognized.
PHOTO LISTMEDIA HOSTMEDIAMEDIAHOST HOST MEDIAMEDIAHOST HOST 40Screen ComponentsCurrent page/Total pagesTotal number of marked thumbnail photos Corresponding buttons on the remote controlUsable USB memoryIt’s available to playback the photo file(*.jpg) in the USB device.The On Screen Display may be different from your set. Imagesare an example to assist with the TV operation.
41MEDIA HOSTPhoto Selection and PopUp MenuAs shown, up to 15 thumbnail photos are listed per page.Use the CCHHDD or EE button to navigate in the thumbnailphoto page.Use the MMAARRKKbutton to mark or unmark a photo. Whenone or more photos are marked, you can view individualphotos or a slide show of the marked photos. If no photosare marked, you can view all photos individually or all pho-tos in the folder in a slide show.12Use DD EEFF GG button to navigate the appropriate thumb-nail photos, then press the EENNTTEERRbutton to show thePopUp menu.Repeatedly, press EEXXIITTbutton to return to TV viewing orpress the button to return to the Media Host menu.MEDIA HOSTMEDIA HOSTVViieeww : Display the selected item. MMaarrkk AAllll : Mark all photos on the screen.DDeelleettee : Delete the selected photo item.CCaanncceell : Close the pop-up menu.34
MEDIA HOSTMEDIAMEDIAHOST HOST MEDIAMEDIAHOST HOST 42Set up the menu in Full-Sized ScreenYou can change the settings to display photos stored on a USBdevice, on a full-sized screen.Detailed operations are available on full-sized photo view screen.Use the CCHHDD or EE button to navigate the thumbnailphoto page.12Use DD EEFF GG button to navigate the appropriate thumb-nail photos, then press the EENNTTEERRbutton to show thePopUp menu.Use DD EEbutton to Move to the VViieeww menu, then press the EENNTTEERRbutton.The selected photo is displayed in full size.3The aspect ratio of a photo may change the size ofthe photo displayed on the screen in full size.4SSlliiddee SShhooww : When no picture is selected, all photosin the current folder are displayed during slide show.When selected, the selected photos are displayedduring slide show. To start slide show, press EENNTTEERR button on .■Set the time interval of the slide show in OOppttiioonn.■A slide show continues for a maximum of 4 hours.After 4 hours, the slide show will end and go to TVmode or external input mode.BBGGMM : Listen to music while viewing photos in fullsize. To start BGM, press EENNTTEERR button on .■Set the BGM device and album in OOppttiioonn.((RRoottaattee)) : Rotate photos.■Rotates the photo 90°, 18 0 °, 270°, 360°clock-wise upon EENNTTEERRbutton on ((RRoottaattee)).DDeelleettee : Delete photos. UseFF or GG button to selectDDeelleetteeand press EENNTTEERR button.
MEDIA HOST435OOppttiioonn : Set values for SSlliiddee SSppeeeeddand MMuussiiccffoollddeerr. Use FF or GGbutton to select OOppttiioonnandpress EENNTTEERR button.■Use FF or GG button and EENNTTEERRbutton to set val-ues. Then go to and press EENNTTEERRto savethe settings.■You cannot change MMuussiicc FFoollddeerrwhile BGM isplaying.HHiiddee : Hide the menu on the full-sized screen. UseFF or GG button to select HHiiddeeand press EENNTTEERRbutton.■To see the menu again on the full-sized screen,press EENNTTEERR button to display.Use DD EEFF GG button to select the previous or next photo.Use DD EEFF GG button to select and control the menu onthe full-sized screen.Use EEXXIITTbutton to go back to the photo list from the full-sized screen.Repeatedly, press EEXXIITTbutton to return to TV viewing orpress button to return to the Media Host menu.MEDIA HOSTMEDIA HOST67NOTEIf it is Progressive JPEG format, some photos may be not decorded.
MUSIC LISTMEDIA HOSTMEDIAMEDIAHOST HOST MEDIAMEDIAHOST HOST 44Purchased music files(*.MP3) may contain copyright restrictions.Playback of these files may not be supported by this model.Music file on your USB device can be played by this unit.The On Screen Display may be different from your set. Imagesare an example to assist with the TV operation.TV INPUTSTBPICTURE SOUNDSAPCCMARK USB EJECTBACKTV INPUTSTBBACKPICTURESAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPMARK USB EJECTTV INPUTSTBBACKSOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTTV INPUTSTBSTBMENUBRIGHT +BRIGHT -TIMERRATIOSIMPLINKBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTScreen ComponentsCurrent page/Total pagesTotal number of marked musicsCurrent playing time/Total play-ing timeCorresponding buttons on the remote controlUsable USB memory
MEDIA HOST45Use the CCHHDD or EE button to navigate in the music titlespage. Use MMAARRKKbutton to mark or unmark a music. When one ormore music files are marked, the marked musics will be playedin sequence. For example, if you want to listen to only onemusic repeatedly, just mark the music only and play it. If nomusic is marked, all the music in the folder will be played insequence.Music Selection and PopUp MenuAs shown , up to 8 music titles are listed per page.NOTEWhen music is playing, is dis-played in front of the music title.A damaged or corrupted musicdoes not play but displays 00:00in playtime.A music downloaded from a paidservice with copyright protectiondoes not start but displays inap-propriate information in playtime.If you press EENNTTEERR, , EEXXIITTbuttons, screen saver is stopped.The , , , ,buttons on the remote control arealso available in this mode.Use DD EEbutton to navigate the appropriate musics, thenpress the EENNTTEERRbutton to show up the pop-up menu.Repeatedly, press EEXXIITTbutton to return to TV viewing orpress button to return to the Media Host menu.■If you don't press any button for a while during the playing,the play information box (as shown in the below) will floatas a screen saver.■The ‘Screen Saver’?Screen saver is to prevent screen pixel damage due to anfixed image remaining on the screen for a extended periodof time.MEDIA HOSTMEDIA HOSTPPllaayy (During stop) : Play the selected musics.Once a music finishes playing, the next selectedone will be played. When there are no selectedmusics to play, the next one in the current folderwill be played. If you go to a different folder andpress the EENNTTEERRbutton, the current music in play-back will stop.SSttoopp PPllaayy (During playback) : Stop the playingmusics.PPllaayy WWiitthh PPhhoottoo: Start playing the selected musicsand then move to the Photo List. MMaarrkk AAllll: Mark all musics in the folder.DDeelleettee: Delete the selected musics. CCaanncceell : Close the pop-up menu.1234
46PICTURE CONTROLPICTURE SIZE (ASPECT RATIO) CONTROLPICTURE CONTROLSet by programSelects the proper picture proportion to matchthe source’s image. 4:3Choose 4:3 when you want to view a picturewith an original 4:3 aspect ratio.16:9Adjust the picture horizontally, in a linear pro-portion to fill the entire screen.Zoom 1Choose Zoom 1 when you want to view thepicture without any alteration. However, the topand bottom portions of the picture will becropped.Zoom 2Choose Zoom 2 when you want the picture tobe altered, both vertically extended andcropped. The picture taking a halfway trade offbetween alteration and screen coverage.This feature lets you choose the way an analog picture with a 4:3 aspect ratiois displayed on your TV. When you receive an analog picture with a 4:3 aspectratio on your 16:9 TV, you need to specify how the picture is to be displayed. ■ RGB-PC input source use 4:3 or 16:9 aspect ratio.Press the RRAATTIIOObutton repeatedly to select the desired picture format. You can also adjust AAssppeecctt RRaattiiooin the PPIICCTTUURREEmenu.1Set By Program4:316:9Zoom 1Zoom 2Set By Program(4:3 4:3) (16:9 16:9)TV INPUTSTBPICTURE SOUNDSAPCCMARK USB EJECTBACKTV INPUTSTBBACKPICTURESAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPMARK USB EJECTTV INPUTSTBBACKSOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBMENUBRIGHT +BRIGHT -TIMERSIMPLINKBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTRATIORATIOMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOST
47PICTURE CONTROLPRESET PICTURE SETTINGSPicture Mode -PresetPress the PPIICCTTUURREEbutton repeatedly to select the pictureappearance setup option as shown below :IInntteelllliiggeenntt EEyyee,DDyynnaammiicc,SSttaannddaarrdd,MMiilldd,UUsseerr11,andUUsseerr22 (your own settings).Press the EEXXIITTbutton to save and return to TV viewing.TV INPUTSTBPICTURE SOUNDSAPCCMARK USB EJECTBACKTV INPUTSTBBACKPICTURESAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPMARK USB EJECTTV INPUTSTBBACKSOUNDSOUNDSAPSAPCCCCMARKMARK USB EJECTUSB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTPICTUREMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTPicture Mode adjusts the TV for the best picture appearance.Select the preset value in the Picture Mode menu based on theprogram category.IInntteelllliiggeenntt EEyyee,DDyynnaammiicc,SSttaannddaarrdd,MMiillddSettings are preset foroptimum picture quality at the factory and are not adjustable.In the UUsseerr 11, and UUsseerr 22modes only, user can directly adjustthe contrast, brightness, color, sharpness, tint.■You can also use the PPIICCTTUURREEmenu to adjust Picture Mode.Picture Mode GColor TemperatureXDAdvancedAspect RatioPicture ResetScreenTruM DemoIntelligent EyeDynamicStandardMildUser 1User 221Picture Mode : User1Color Temperature : CoolXDAdvancedAspect Ratio : 16:9Picture ResetScreenTruM Demo
48Color Tone -PresetChoose one of three automatic color adjustments. Set towarm to enhance hotter colors such as red, or set to cool tosee less intense colors with more blue.When selecting Picture Mode options (Dynamic, Standardand Mild), CCoolloorr TTeemmppeerraattuurreeis automatically change.When selecting Picture Mode options (User 1 and User 2),you can choose the CCoolloorr TTeemmppeerraattuurree.Press the MMEENNUUbutton and then use DDor EEbuttonto select the PPIICCTTUURREEmenu.Press the GG button and then use DDor EEbutton toselect CCoolloorr TTeemmppeerraattuurree. Press the GG button and then use DDor EEbutton toselect either CCooooll,, MMeeddiiuumm,, WWaarrmm or UUsseerr.Press EEXXIITTbutton to return to TV viewing or press MMEENNUUbutton to return to the previous menu.TV INPUTSTBPICTURE SOUNDSAPCCMARK USB EJECTBACKTV INPUTSTBBACKPICTURESAPCCMARK USB EJECTTV INPUTTV INPUTSTBSTBBRIGHT +BRIGHT -TIMERRATIOSIMPLINKBACKPICTURE SOUNDCCMARK USB EJECTMENUTV INPUTSTBBACKPICTURE SOUNDSAPMARK USB EJECTTV INPUTSTBBACKSOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTPicture ModeColor Temperature GXDAdvancedAspect RatioPicture ResetScreenTruM DemoCoolMediumWarmUser2341PICTURE CONTROLPICTURE CONTROLPicture Mode : User1Color Temperature : CoolXDAdvancedAspect Ratio : 16:9Picture ResetScreenTruM Demo
PICTURE CONTROLMANUAL PICTURE ADJUSTMENT49Picture Mode -User ModePress the MMEENNUUbutton and then use DDor EEbuttonto select the PPIICCTTUURREEmenu.Press the GG button and then use DDor EEbutton toselect PPiiccttuurree MMooddee.Press the GG button and then use DDor EEbutton toselect UUsseerr 11or UUsseerr 22.Press the GG button and then use DDor EEbutton toselect the desired picture option ((CCoonnttrraasstt,,BBrriigghhttnneessss,, CCoolloorr,, SShhaarrppnneessss,,TTiinntt or BBaacckk LLiigghhtt)).■[[BBaacckk LLiigghhtt]] To control the brightness of screen, adjustthe brightness of LCD panel .Press the GG button and then use FF or GGbutton tomake appropriate adjustments.Press EEXXIITTbutton to return to TV viewing or pressMMEENNUUbutton to return to the previous menu.Adjust the picture appearance to suit your preference andviewing situations.TV INPUTSTBPICTURE SOUNDSAPCCMARK USB EJECTBACKTV INPUTSTBBACKPICTURESAPCCMARK USB EJECTTV INPUTSTBBRIGHT +BRIGHT -TIMERRATIOSIMPLINKBACKPICTURE SOUNDCCMARK USB EJECTMENUTV INPUTSTBBACKPICTURE SOUNDSAPMARK USB EJECTTV INPUTSTBBACKSOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOST234561Contrast 85EEPicture Mode : User1Color Temperature : CoolXDAdvancedAspect Ratio : 16:9 Picture ResetScreenTruM DemoEEUser1Contrast 85 GBrightness 50Color 50Sharpness 50Tint 0Back Light 100RGPress to confirm.MENUPicture ModeColor TemperatureXDAdvancedAspect RatioPicture ResetScreenTruM DemoIntelligent EyeDynamicStandardMildUser 1 GUser 2Selection ( Gor ) leads you tothe detailed setting screen.
PICTURE CONTROLPICTURE CONTROL50You can also adjust the detailed settings(Red, Green, Blue)by selecting the UUsseerrmenu.This feature operate only if the picture mode set UUsseerr 11orUUsseerr 22.Press the MMEENNUUbutton and then use DDor EEbuttonto select the PPIICCTTUURREEmenu.Press the GG button and then use DDor EEbutton toselect CCoolloorr TTeemmppeerraattuurree. Press the GG button and then use DDor EEbutton toselect UUsseerr.Press the GG button and then use DDor EEbutton toselect RReedd, GGrreeeenn, or BBlluuee.Press the GG button and then use FF or GGbutton tomake appropriate adjustments.■The adjustment range of RReedd, GGrreeeenn, or BBlluueeis -20~+20.Press EEXXIITTbutton to return to TV viewing or pressMMEENNUUbutton to return to the previous menu.TV INPUTSTBPICTURE SOUNDSAPCCMARK USB EJECTBACKTV INPUTSTBBACKPICTURESAPCCMARK USB EJECTTV INPUTSTBBRIGHT +BRIGHT -TIMERRATIOSIMPLINKBACKPICTURE SOUNDCCMARK USB EJECTMENUTV INPUTSTBBACKPICTURE SOUNDSAPMARK USB EJECTTV INPUTSTBBACKSOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTRed 0 EEPicture ModeColor TemperatureXDAdvancedAspect RatioPicture ResetScreenTruM DemoPress to confirm.MENUSelection ( Gor ) leads you tothe detailed setting screen.CoolMediumWarmUser GUserRed 0 GGreen 0Blue 0234561Color Tone -User ModePICTURE CONTROLPicture Mode : User1Color Temperature : CoolXDAdvancedAspect Ratio : 16:9Picture ResetScreenTruM DemoEE
PICTURE CONTROLXD - PICTURE IMPROVEMENT TECHNOLOGY51Press the MMEENNUUbutton and then use DDor EEbuttonto select the PPIICCTTUURREEmenu.Press the GG button and then use DDor EEbutton toselect XXDD.Press the GG button and then use FF or GGbutton toselect AAuuttoo or MMaannuuaall.* SSeelleeccttiinngg tthhee MMaannuuaall1. Press the EE button and then use DDor EEbutton toselect XXDD CCoonnttrraasstt,, XXDD CCoolloorror XXDD NNooiissee.■XXDD CCoonnttrraasstt :: Optimizing the contrast automatically according to the brightness of the reflection.■XXDD CCoolloorr ::Adjusting the colors of the reflec-tion automatically to reproduce as closely aspossible to the natural colors.■XXDD NNooiissee :: Removing the noise up to the point where it does not damage the original picture.2. Use the FF or GGbutton to select OOnnor OOffff.Press EEXXIITTbutton to return to TV viewing or press MMEENNUUbutton to return to the previous menu.XD is LG Electronics unique picture improving technology todisplay a real HD source through an digital signal process-ing algorithm.When selecting Picture Mode options (Dynamic, Standardand Mild), XD is automatically change to Auto.When selecting Picture Mode options (User 1 and User 2),you can choose the Auto / Manual and when selectingManual, you can adjust the XD Contrast, XD color and XDNoise.TV INPUTSTBPICTURE SOUNDSAPCCMARK USB EJECTBACKTV INPUTSTBBACKPICTURESAPCCMARK USB EJECTTV INPUTTV INPUTSTBSTBBRIGHT +BRIGHT -TIMERRATIOSIMPLINKBACKPICTURE SOUNDCCMARK USB EJECTMENUTV INPUTSTBBACKPICTURE SOUNDSAPMARK USB EJECTTV INPUTSTBBACKSOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTPicture ModeColor Temperature XD GAdvancedAspect RatioPicture ResetScreenTruM DemoManualXD Contrast OnXD Color OnXD Noise On2341Picture Mode : User1Color Temperature : CoolXDAdvancedAspect Ratio : 16:9Picture ResetScreenTruM Demo
PICTURE CONTROLADVANCED -CINEMA 3:2 PULLDOWN MODEPICTURE CONTROL52Press the MMEENNUUbutton and then use DD or EE buttonto select the PPIICCTTUURREEmenu.Press the GG button and then use DD or EE button toselect AAddvvaanncceedd. Press the GG button and then use DD or EE button toselect CCiinneemmaa 33::22 MMooddee. Press the GG button and then use FF or GGbutton toselect OOnnor OOffff.Press EEXXIITTbutton to return to TV viewing or press MMEENNUUbutton to return to the previous menu.TV INPUTSTBPICTURE SOUNDSAPCCMARK USB EJECTBACKTV INPUTSTBBACKPICTURESAPCCMARK USB EJECTTV INPUTTV INPUTSTBSTBBRIGHT +BRIGHT -TIMERRATIOSIMPLINKBACKPICTURE SOUNDCCMARK USB EJECTMENUTV INPUTSTBBACKPICTURE SOUNDSAPMARK USB EJECTTV INPUTSTBBACKSOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTSet up the TV for the best picture appearance for viewingmovies.This feature is disable only in RGB-PC, HDMI1, HDMI2,HDMI3 or Component1,2(except 480i) mode.When you operate Cinema (3:2 Pull-Down Mode or CinemaCorrection Mode), the TV will adjust 24 fps video frommovies to 30 fps video for display (This function is onlyavailable in TV(Analog, DTV), AV1, AV2, Component 480imode.) 23451Picture ModeColor TemperatureXD Advanced GAspect RatioPicture ResetScreenTruM DemoCinema 3:2 Mode OffBlack Level LowTruM LowPicture Mode : User1Color Temperature : CoolXDAdvancedAspect Ratio : 16:9Picture ResetScreenTruM Demo
53PICTURE CONTROLADVANCED - BLACK (DARKNESS) LEVELTV INPUTSTBPICTURE SOUNDSAPCCMARK USB EJECTBACKTV INPUTSTBBACKPICTURESAPCCMARK USB EJECTTV INPUTTV INPUTSTBSTBBRIGHT +BRIGHT -TIMERRATIOSIMPLINKBACKPICTURE SOUNDCCMARK USB EJECTMENUTV INPUTSTBBACKPICTURE SOUNDSAPMARK USB EJECTTV INPUTSTBBACKSOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTPress the MMEENNUUbutton and then use DD or EE buttonto select the PPIICCTTUURREEmenu.Press the GG button and then use DD or EE button toselect AAddvvaanncceedd. Press the GG button and then use DD or EE button toselect BBllaacckk lleevveell. Press the GG button and then use FF or GGbutton toselect LLooww, or HHiigghh.■LLoowwThe reflection of the screen gets darker.■HHiigghhThe reflection of the screen gets brighter.Press EEXXIITTbutton to return to TV viewing or press MMEENNUUbutton to return to the previous menu.Adjusting the contrast and the brightness of the screenusing the black level of the screen.This feature operates only in HDMI1, HDMI2, HDMI3 orAV1, AV2 mode.Picture ModeColor TemperatureXD Advanced GAspect RatioPicture ResetScreenTruM DemoCinema 3:2 Mode OffBlack Level LowTruM Low23451Picture Mode : User1Color Temperature : CoolXDAdvancedAspect Ratio : 16:9Picture ResetScreenTruM Demo
PICTURE CONTROLADVANCED - TruMPICTURE CONTROL54TV INPUTSTBPICTURE SOUNDSAPCCMARK USB EJECTBACKTV INPUTSTBBACKPICTURESAPCCMARK USB EJECTTV INPUTTV INPUTSTBSTBBRIGHT +BRIGHT -TIMERRATIOSIMPLINKBACKPICTURE SOUNDCCMARK USB EJECTMENUTV INPUTSTBBACKPICTURE SOUNDSAPMARK USB EJECTTV INPUTSTBBACKSOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTPress the MMEENNUUbutton and then use DD or EE buttonto select the PPIICCTTUURREEmenu.Press the GG button and then use DD or EE button toselect AAddvvaanncceedd. Press the GG button and then use DD or EE button toselect TTrruuMM. Press the GG button and then use FF or GGbutton toselect OOffff, LLooww, or HHiigghh.■LLoowwSet amount of film judder to low.■HHiigghhSet amount of film judder to high.* If you have some problem in viewing picture, setTTrruuMMto LLoowwor OOffff.Press EEXXIITTbutton to return to TV viewing or press MMEENNUUbutton to return to the previous menu.Picture ModeColor TemperatureXD Advanced GAspect RatioPicture ResetScreenTruM DemoCinema 3:2 Mode OffBlack Level LowTruM High23451Picture Mode : User1Color Temperature : CoolXDAdvancedAspect Ratio : 16:9Picture ResetScreenTruM DemoSet up the TV for best picture with film judder cancellationthat provides stunningly steady movements.This feature is disable in RGB-PC, HDMI-PC mode.And when HDMI is set to the PC in IInnppuutt LLaabbeell, TTrruuMMisalso disable.
PICTURE CONTROLTruM DEMO55TV INPUTSTBPICTURE SOUNDSAPCCMARK USB EJECTBACKTV INPUTSTBBACKPICTURESAPCCMARK USB EJECTTV INPUTTV INPUTSTBSTBBRIGHT +BRIGHT -TIMERRATIOSIMPLINKBACKPICTURE SOUNDCCMARK USB EJECTMENUTV INPUTSTBBACKPICTURE SOUNDSAPMARK USB EJECTTV INPUTSTBBACKSOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTPress the MMEENNUUbutton and then use DD or EE buttonto select the PPIICCTTUURREEmenu.Press the GG button and then use DD or EE button toselect TTrruuMM DDeemmoo. Press the GG button to begin TTrruuMM DDeemmoo.To stop TTrruuMM DDeemmoo, press the EEXXIITT button. Picture ModeColor TemperatureXD AdvancedAspect RatioPicture ResetScreenTruM Demo G2341Picture Mode : User1Color Temperature : CoolXDAdvancedAspect Ratio : 16:9Picture ResetScreenTruM DemoUse it to see the difference between TruM Demo on andTruM Demo off.TruM On TruM OffSelection ( Gor ) leads you to theTruM Demo.• TruM Demo
PICTURE CONTROLPICTURE RESETPICTURE CONTROL56Press the MMEENNUUbutton and then use DDor EEbuttonto select the PPIICCTTUURREEmenu.Press the GG button and then use DDor EEbutton toselect PPiiccttuurree RReesseett. Press the GG button to reset the Picture menu optionsto original values.TV INPUTSTBPICTURE SOUNDSAPCCMARK USB EJECTBACKTV INPUTSTBBACKPICTURESAPCCMARK USB EJECTTV INPUTTV INPUTSTBSTBBRIGHT +BRIGHT -TIMERRATIOSIMPLINKBACKPICTURE SOUNDCCMARK USB EJECTMENUTV INPUTSTBBACKPICTURE SOUNDSAPMARK USB EJECTTV INPUTSTBBACKSOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTUse to quickly reset all the Picture menu options to theiroriginal factory preset values.Picture ModeColor TemperatureXD Advanced Aspect RatioPicture Reset GScreenTruM DemoSelection ( Gor ) resets to thefactory settings(defaults).231Picture Mode : User1Color Temperature : CoolXDAdvancedAspect Ratio : 16:9Picture ResetScreenTruM Demo
AUTO VOLUME LEVELER (AUTO VOLUME)SOUND & LANGUAGE CONTROLSOUND & LANGUAGE CONTROL57Scans for changes in sound levels during commercials, thenadjusts the sound to match the specified audio level. AutoVolume makes sure that the volume level remains consistentwhether you are watching a commercial or a regular TV pro-gram.TV INPUTSTBPICTURE SOUNDSAPCCMARK USB EJECTBACKTV INPUTSTBBACKPICTURESAPCCMARK USB EJECTTV INPUTTV INPUTSTBSTBBRIGHT +BRIGHT -TIMERRATIOSIMPLINKBACKPICTURE SOUNDCCMARK USB EJECTMENUTV INPUTSTBBACKPICTURE SOUNDSAPMARK USB EJECTTV INPUTSTBBACKSOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTPress the MMEENNUUbutton and then use DD or EE buttonto select the AAUUDDIIOOmenu.Press the GG button and then use DD or EE button toselect AAuuttoo VVoolluummee. Press the GG button and then use DD or EE button toselect OOnnor OOffff.Press EEXXIITTbutton to return to TV viewing or pressMMEENNUUbutton to return to the previous menu.2341Sound Mode Auto Volume GBalance TV Speaker OffOnSound Mode : StandardAuto Volume : OnBalance : 0TV Speaker : On
SOUND & LANGUAGE CONTROLPRESET SOUND SETTINGS (SOUND MODE)SOUND & LANGUAGE CONTROL58Sound Mode lets you enjoy the best sound without any special adjust-ment because the TV sets the appropriate sound options based on theprogram content.Standard, Music, Movie, Sports and User are preset for good soundquality at the factory and are not adjustable.Press the SSOOUUNNDDbutton repeatedly to select the appropriatesound setup as shown below:SSttaannddaarrdd,MMuussiicc,MMoovviiee,SSppoorrttssand UUsseerr (your own settings).Press EEXXIITTbutton to return to TV viewing .TV INPUTSTBPICTURE SOUNDSAPCCMARK USB EJECTBACKTV INPUTSTBBACKBACKPICTUREPICTURE SOUNDSAPSAPCCCCMARKMARK USB EJECTUSB EJECTTV INPUTSTBBACKPICTURE SOUNDCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPMARK USB EJECTTV INPUTSTBBACKSOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOST■ You can also adjust Sound Mode in the AAUUDDIIOOmenu.21Sound Mode GAuto VolumeBalanceTV SpeakerStandardMusicMovieSportsUserSound Mode : StandardAuto Volume : OnBalance : 0TV Speaker : On
SOUND SETTING ADJUSTMENT - USER MODESOUND & LANGUAGE CONTROL59Front Surround 3D EchoSound SystemTV INPUTSTBPICTURE SOUNDSAPCCMARK USB EJECTBACKTV INPUTSTBBACKPICTURESAPCCMARK USB EJECTTV INPUTTV INPUTSTBSTBBRIGHT +BRIGHT -TIMERRATIOSIMPLINKBACKPICTURE SOUNDCCMARK USB EJECTMENUTV INPUTSTBBACKPICTURE SOUNDSAPMARK USB EJECTTV INPUTSTBBACKSOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTSound Mode Auto Volume Balance TV SpeakerSelection ( Gor ) leads you tothe detailed setting screen.StandardMusicMovieSportsUser GUserTreble 50 GBass 50Front Surround OffPress to confirm.MENUSSRRSS TTrruuSSuurrrroouunndd XXTTTakes advantage of any multi-channel format withoutneeding to add extra speakers or equipment. Dialog clarity,bass enrichment, and the addition of stereo audioenhancement produces an immersive sound experiencefrom standard stereo material. 33DD EEcchhooSSoouunndd SSyysstteemmCreates a stunning simulated stereo effect from any monosound and a realistic three-dimensional sound with a verywide and deep sound stage.Press the MMEENNUUbutton and then use DDor EEbuttonto select the AAUUDDIIOOmenu.Press the GGbutton and then use DDor EEbutton toselect SSoouunndd MMooddee. Press the GGbutton and then use DDor EEbutton toselect UUsseerr.Press the GGbutton and then use DDor EEbutton toselect the desired sound option (TTrreebbllee,BBaassss,orFFrroonntt SSuurrrroouunndd).Press the GGbutton and then use FFor GGbutton tomake appropriate adjustments.SSeelleeccttiinngg tthhee FFrroonntt ssuurrrroouunnddPress the GGbutton and then use FFor GGbutton toselect OOffff, 33DD EEcchhooSSoouunndd SSyysstteemm or SSRRSS (SoundRetrieval System) TTrruuSSuurrrroouunndd XXTT.Press EEXXIITTbutton to return to TV viewing or pressMMEENNUUbutton to return to the previous menu.Adjust the sound to suit your taste and room situations. 234561
SOUND & LANGUAGE CONTROLBALANCESOUND & LANGUAGE CONTROL60TV INPUTSTBPICTURE SOUNDSAPCCMARK USB EJECTBACKTV INPUTSTBBACKPICTURESAPCCMARK USB EJECTTV INPUTTV INPUTSTBSTBBRIGHT +BRIGHT -TIMERRATIOSIMPLINKBACKPICTURE SOUNDCCMARK USB EJECTMENUTV INPUTSTBBACKPICTURE SOUNDSAPMARK USB EJECTTV INPUTSTBBACKSOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTAdjust the left/right sound of speaker to suit your taste androom situations.Press the MMEENNUUbutton and then use DDor EEbutton toselect the AAUUDDIIOOmenu.Press the GGbutton and then use DDor EEbutton toselect BBaallaannccee. Press the GGbutton and then use FFor GGbutton tomake appropriate adjustments.Press EEXXIITTbutton to return to TV viewing or pressMMEENNUUbutton to return to the previous menu.2341L RBalance 0Sound ModeAuto VolumeBalance 0TV SpeakerL RSound Mode : StandardAuto Volume : OnBalance : 0TV Speaker : On
STEREO/SAP BROADCAST SETUPSOUND & LANGUAGE CONTROL61TV INPUTSTBPICTURE SOUNDSAPCCMARK USB EJECTBACKTV INPUTSTBBACKPICTURESAPCCMARK USB EJECTTV INPUTSTBBACKBACKPICTUREPICTURE SOUNDSOUNDSAP CCCCMARKMARK USB EJECTUSB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPMARK USB EJECTTV INPUTSTBBACKSOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTThis TV can receive MTS stereo programs and any SAP(Secondary Audio Program)that accompanies the stereo pro-gram if the station transmits an additional sound signal as well asthe original one and when you select Stereo or SAP on theremote control.Mono sound is automatically received if the broadcast is only inMono; even though Stereo or SAP has been selected.Select Mono if you want to listen to the mono sound in remoteareas during stereo/SAP broadcasting. Stereo or SAP can be received in Analog channel.Use the SSAAPPbutton to select your desired MTS mode inanalog signal. Each time you press the SSAAPPbutton, Mono,Stereo, or SAP appear in turn. ■If other languages available on the digital signal, selectthem with the SSAAPPbutton.Press EEXXIITTbutton to save and return to TV viewing.21
SOUND & LANGUAGE CONTROLTV SPEAKERS ON/OFF SETUPSOUND & LANGUAGE CONTROL62TV INPUTSTBPICTURE SOUNDSAPCCMARK USB EJECTBACKTV INPUTSTBBACKPICTURESAPCCMARK USB EJECTTV INPUTTV INPUTSTBSTBBRIGHT +BRIGHT -TIMERRATIOSIMPLINKBACKPICTURE SOUNDCCMARK USB EJECTMENUTV INPUTSTBBACKPICTURE SOUNDSAPMARK USB EJECTTV INPUTSTBBACKSOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTPress the MMEENNUUbutton and then use DDor EEbuttonto select the AAUUDDIIOOmenu.Press the GG button and then use DDor EEbutton toselect TTVV SSppeeaakkeerr. Press the GG button and then use DDor EEbutton toselect OOnnor OOffff.Press EEXXIITTbutton to return to TV viewing or pressMMEENNUUbutton to return to the previous menu.Turn the TV speakers off if using external audio equipment.Feature turns the TV Speakers option On or Off.2341Sound ModeAuto VolumeBalanceTV Speaker GOffOnSound Mode : StandardAuto Volume : OnBalance : 0TV Speaker : On
AUDIO LANGUAGE SOUND & LANGUAGE CONTROL63Other languages may be available if a digital signal is pro-vided by the broadcasting station. This feature operate only in DTV/CADTV mode.TV INPUTSTBPICTURE SOUNDSAPCCMARK USB EJECTBACKTV INPUTSTBBACKPICTURESAPCCMARK USB EJECTTV INPUTTV INPUTSTBSTBBRIGHT +BRIGHT -TIMERRATIOSIMPLINKBACKPICTURE SOUNDCCMARK USB EJECTMENUTV INPUTSTBBACKPICTURE SOUNDSAPMARK USB EJECTTV INPUTSTBBACKSOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTPress the MMEENNUUbutton and then use DDor EEbuttonto select the OOPPTTIIOONNmenu.Press the GG button and then use DDor EEbutton toselect LLaanngguuaaggee. Press the GG button and then use DDor EEbutton toselect AAuuddiioo.Press the GGbutton and then use FFor GGbutton toselect : English, Spanish, or French.Press EEXXIITTbutton to return to TV viewing or pressMMEENNUUbutton to return to the previous menu.2341Language : EnglishInput LabelSimpLink : OffKey Lock : OffCaption : OffSet ID : 1Language GInput LabelSimpLinkKey LockCaptionSet IDMenu EnglishAudio English5Language GInput LabelSimpLinkKey LockCaptionSet IDMenu EnglishAudio English
SOUND & LANGUAGE CONTROLON-SCREEN MENUS LANGUAGE SELECTIONSOUND & LANGUAGE CONTROL64Press the MMEENNUUbutton and then use DDor EE buttonto select the OOPPTTIIOONNmenu.Press the GG button and then use DDor EEbutton toselect LLaanngguuaaggee.Press the GG button and then use DDor EEbutton toselect MMeennuu.Press the GGbutton and then use FFor GGbutton toselect your desired language. From this point on, the on-screen menus will be shownin the selected language.Press EEXXIITTbutton to return to TV viewing or pressMMEENNUUbutton to return to the previous menu.The menus can be shown on the screen in the selected lan-guage. First select your language.TV INPUTSTBPICTURE SOUNDSAPCCMARK USB EJECTBACKTV INPUTSTBBACKPICTURESAPCCMARK USB EJECTTV INPUTTV INPUTSTBSTBBRIGHT +BRIGHT -TIMERRATIOSIMPLINKBACKPICTURE SOUNDCCMARK USB EJECTMENUTV INPUTSTBBACKPICTURE SOUNDSAPMARK USB EJECTTV INPUTSTBBACKSOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOST2341Language : EnglishInput LabelSimpLink : OffKey Lock : OffCaption : OffSet ID : 1Language GInput LabelSimpLinkKey LockCaptionSet IDMenu EnglishAudio EnglishLanguage GInput LabelSimpLinkKey LockCaptionSet IDMenu EnglishAudio English5
CAPTION MODE SOUND & LANGUAGE CONTROL65TV INPUTSTBPICTURE SOUNDSAPCCMARK USB EJECTBACKTV INPUTSTBBACKPICTURESAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDCCMARK USB EJECTTV INPUTSTBBACKPICTUREPICTURE SOUNDSOUNDSAPSAPCCMARKMARK USB EJECTUSB EJECTTV INPUTSTBBACKSOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTUse the CCCCbutton to select Caption OOnnor OOffff. ■ When selecting OOffff, Sub-menus for Analog, DTV, andDigital Option become disabled.Press EEXXIITTto save and return to TV viewing.21Caption must be provided to help people with hearing loss watchTV.■ You can also adjust CCaappttiioonnin the OOPPTTIIOONNmenu.Language : EnglishInput LabelSimpLink : OffKey Lock : OffCaption : OffSet ID : 1LanguageInput LabelSimpLinkKey LockCaption GSet IDMode OnAnalog Text1Digital Service3Digital Option
SOUND & LANGUAGE CONTROLSOUND & LANGUAGE CONTROL66Language : EnglishInput LabelSimpLink : OffKey Lock : OffCaption : OffSet ID : 1LanguageInput LabelSimpLinkKey LockCaptionSet IDMode OnAnalog Text1Digital Service3Digital OptionAnalog Broadcasting System CaptionsSelect a caption mode for displaying captioning informationif provided on a program. Analog caption displays informa-tion at any position on the screen and is usually the pro-gram's dialog.Caption/Text, if provided by the broadcaster, would beavailable for both digital and analog channels on theAntenna/Cable.This TV is programmed to memoririze the caption/text modewhich was last set when you turn the power off.This function is only available when CCaappttiioonnMode is setOOnn.Press the MMEENNUUbutton and then use DDor EEbuttonto select the OOPPTTIIOONN menu.Press the GGbutton and then use DDor EEbutton toselect CCaappttiioonn..Press the GGbutton and then use DDor EEbutton toselect AAnnaalloogg..Use FFor GGbutton to select CCCC11, CCCC22, CCCC33, CCCC44,TTeexxtt11, TTeexxtt22, TTeexxtt33or TTeexxtt44■CCAAPPTTIIOONNThe term for the words that scroll across the bottom ofthe TV screen; usually the audio portion of the programprovided for the hearing impaired. ■TTEEXXTTThe term for the words that appear in a large blackframe and almost cover the entire screen; usually mes-sages provided by the broadcaster.Press EEXXIITTbutton to return to TV viewing or pressMMEENNUUbutton to return to the previous menu.12345
SOUND & LANGUAGE CONTROL67TV INPUTSTBPICTURE SOUNDSAPCCMARK USB EJECTBACKTV INPUTSTBBACKPICTURESAPCCMARK USB EJECTTV INPUTTV INPUTSTBSTBBRIGHT +BRIGHT -TIMERRATIOSIMPLINKBACKPICTURE SOUNDCCMARK USB EJECTMENUTV INPUTSTBBACKPICTURE SOUNDSAPMARK USB EJECTTV INPUTSTBBACKSOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTChoose the language you want the DTV/CADTV Captionsto appear in.Other Languages can be chosen for digital sources only ifthey are included on the program.This function in only available when Caption Mode is setOn.Digital Broadcasting System CaptionsLanguage : EnglishInput LabelSimpLink : OffKey Lock : OffCaption : OffSet ID : 1LanguageInput LabelSimpLinkKey LockCaptionSet IDMode OnAnalog Text1Digital Service3Digital OptionPress the MMEENNUUbutton and then use DDor EEbuttonto select the OOPPTTIIOONNmenu.Press the GGbutton and then use DDor EEbutton toselect CCaappttiioonn. Press the GGbutton and then use DDor EEbutton toselect DDiiggiittaall. Use FFor GGbutton to select SSeerrvviiccee11~SSeerrvviiccee66.Press EEXXIITTbutton to return to TV viewing or pressMMEENNUUbutton to return to the previous menu.23415
SOUND & LANGUAGE CONTROLSOUND & LANGUAGE CONTROL68LanguageInput LabelSimpLinkKey LockCaptionSet IDMode OnAnalog Text1Digital Service3Digital Option GSelection ( Gor ) leads you to the Caption Option screen.TV INPUTSTBPICTURE SOUNDSAPCCMARK USB EJECTBACKTV INPUTSTBBACKPICTURESAPCCMARK USB EJECTTV INPUTTV INPUTSTBSTBBRIGHT +BRIGHT -TIMERRATIOSIMPLINKBACKPICTURE SOUNDCCMARK USB EJECTMENUTV INPUTSTBBACKPICTURE SOUNDSAPMARK USB EJECTTV INPUTSTBBACKSOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTCustomize the DTV/CADTV captions that appear on yourscreen.This function is only available when CCaappttiioonnMode is setOOnn.Caption OptionLanguage : EnglishInput LabelSimpLink : OffKey Lock : OffCaption : OffSet ID : 1LanguageInput LabelSimpLinkKey LockCaptionSet IDMode OnAnalog Text1Digital Service3Digital Option GPress the MMEENNUUbutton and then use DDor EE buttonto select the OOPPTTIIOONNmenu.Press the GG button and then use DDor EEbutton toselect CCaappttiioonn.Press the GG button and then use DDor EEbutton toselect DDiiggiittaall OOppttiioonn.Press the GG button and then use FFor GG button toselect CCuussttoomm.Use DDor EE button to customize the Style, Font, etc.,to your preference.A preview icon is provided at the bottom of the screen,use it to see the caption language.■SSiizzee:: Set the size the words will appear in.■FFoonntt:: Select a typeface for the words.■TTeexxtt CCoolloorr:: Choose a color for the text.■TTeexxtt OOppaacciittyy:: Specify the opacity for the text color.■BBgg ((BBaacckkggrroouunndd))CCoolloorr:: Select a background color.■BBgg ((BBaacckkggrroouunndd))OOppaacciittyy:: Select the opacity for thebackground color.■EEddggee TTyyppee:: Select an edge type.■EEddggee CCoolloorr:: Select a color for the edges.Press EEXXIITTbutton to return to TV viewing or pressMMEENNUUbutton to return to the previous menu.23415Style CustomSize A StandardFont Font 0Text Color WhiteText OpacitySolid Bg Color BlackBg Opacity SolidEdge Type NoneEdge Color Black6Selection ( Gor ) leads you to the Caption Option screen.
TIME SETTINGCLOCK SETTINGTIME SETTING69The time is set automatically from a digital channel signal.The digital channel signal includes information for the cur-rent time provided by the broadcasting station.Set the clock manually if the current time is set incorrectlyby the auto clock function.Press the MMEENNUUbutton and then use DDor EEbutton toselect the TTIIMMEEmenu.Press the GG button and then use DDor EEbutton toselect CClloocckk. Press the GG button and then use DDor EEbutton toselect AAuuttoo.Press the GG button and then use DDor EEbutton toselect your viewing area time zone : U.S.A: EEaasstteerrnn,CCeennttrraall,MMoouunnttaaiinn,PPaacciiffiicc,AAllaasskkaaorHHaawwaaiiii.Canada: EEaasstteerrnn,CCeennttrraall,MMoouunnttaaiinn,PPaacciiffiicc,NNeewwFF..llaannddor AAttllaannttiicc.Press the GG button and then use DDor EEbutton toselect AAuuttoo,OOffff,OOnn, depending on whether or notyour viewing area observes Daylight Saving time.Press EEXXIITTbutton to return to TV viewing or pressMMEENNUUbutton to return to the previous menu.234561TV INPUTSTBPICTURE SOUNDSAPCCMARK USB EJECTBACKTV INPUTSTBBACKPICTURESAPCCMARK USB EJECTTV INPUTTV INPUTSTBSTBBRIGHT +BRIGHT -TIMERRATIOSIMPLINKBACKPICTURE SOUNDCCMARK USB EJECTMENUTV INPUTSTBBACKPICTURE SOUNDSAPMARK USB EJECTTV INPUTSTBBACKSOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTClock GOff TimeOn TimeSleep TimeAuto SleepTime Zone EasternAutoDaylightSavingAuto Clock SetupClock : Oct 19, 2006, 03:44 AMOff Time : OffOn Time : OffSleep Time : OffAuto Sleep : OffYear - - - -Date - - / - -Time - - : - - - -AutoClock GOff TimeOn TimeSleep TimeAuto SleepAutoYear - - - -Date - - / - -Time - - : - - - -AutoTime ZoneEasternDaylightSaving
TIME SETTINGTIME SETTING70TV INPUTSTBPICTURE SOUNDSAPCCMARK USB EJECTBACKTV INPUTSTBBACKPICTURESAPCCMARK USB EJECTTV INPUTTV INPUTSTBSTBBRIGHT +BRIGHT -TIMERRATIOSIMPLINKBACKPICTURE SOUNDCCMARK USB EJECTMENUTV INPUTSTBBACKPICTURE SOUNDSAPMARK USB EJECTTV INPUTSTBBACKSOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTIf the current time setting is wrong, reset the clock manually.Press the MMEENNUUbutton and then use DDor EEbuttonto select the TTIIMMEEmenu.Press the GG button and then use DDor EEbutton to select CClloocckk. Press the GG button and then use DDor EEbutton toselect MMaannuuaall.Press the GG button and then use FFor GGbutton to select either the year, date, or time option. Once selected, use the DDor EEbutton to set the year, date, and time options.Press EEXXIITTbutton to return to TV viewing or press MMEENNUUbutton to return to the previous menu.Manual Clock SetupClock : Oct 19, 2006, 03:44 AMOff Time : OffOn Time : OffSleep Time : OffAuto Sleep : OffClock GOff TimeOn TimeSleep TimeAuto SleepYear - - - -Date - - / - -Time - - : - - - -Manual52341
TIME SETTINGAUTO ON/OFF TIME SETTING71The timer function operates only if the current time hasbeen set.The Off-Time function overrides the On-Time function ifthey are both set to the same time.The TV must be in standby mode for the On-Time to work.If you do not press any button within 2 hours after the TVturns on with the On Time function, the TV will automati-cally revert to standby mode.Press the MMEENNUUbutton and then use DDor EEbutton toselect the TTIIMMEEmenu.Press the GG button and then use DDor EEbutton toselect OOffff TTiimmeeor OOnn TTiimmee. Press the GG button and then use DDor EEbutton toselect OOnn.■To cancel OOnn//OOffff TTiimmeefunction, select OOffff.Press the GG button and then use DDor EEbutton to setthe hour.Press the GG button and then use DDor EEbutton to setthe minutes.OOnnllyy OOnn TTiimmee Press the GG button and then use DDor EEbutton toselect the channel at turn-on.Press the GG button and then use DDor EEbutton to setthe sound level at turn-on.Press EEXXIITTbutton to return to TV viewing or pressMMEENNUUbutton to return to the previous menu.TV INPUTSTBPICTURE SOUNDSAPCCMARK USB EJECTBACKTV INPUTSTBBACKPICTURESAPCCMARK USB EJECTTV INPUTTV INPUTSTBSTBBRIGHT +BRIGHT -TIMERRATIOSIMPLINKBACKPICTURE SOUNDCCMARK USB EJECTMENUTV INPUTSTBBACKPICTURE SOUNDSAPMARK USB EJECTTV INPUTSTBBACKSOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTClockOff TimeOn Time GSleep TimeAuto SleepOffOnTime 6 : 30 AMCh. TV 2-0Vol 17Clock : Oct 19, 2006, 03:44 AMOff Time : OffOn Time : OffSleep Time : OffAuto Sleep : Off2345671
TIME SETTINGSLEEP TIME SETTINGTIME SETTING72Press the TTIIMMEERRbutton repeatedly to select the number of minutes. Firstthe OOffffoption appears on the screen, followed by the following Sleep Timeoptions : 10, 20, 30, 60, 90, 120, 180, and 240 minutes.When the number of minutes you want is displayed on the screen, press theEENNTTEERRbutton. The timer begins to count down from the number of minutesselected.To check the remaining minutes before the TV turns off, press the TTIIMMEERRbutton once.To cancel the Sleep Time, press the TTIIMMEERRbutton repeatedly to select OOffff.TV INPUTSTBPICTURE SOUNDSAPCCMARK USB EJECTBACKTV INPUTSTBBACKPICTURESAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPMARK USB EJECTTV INPUTSTBBACKSOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTTV INPUTSTBSTBMENUBRIGHT +BRIGHT -RATIOSIMPLINKBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTIMERTIMERMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTThe Sleep Time turns the TV off at the preset time.Note that this setting is cleared when the TV is turned off.You can also set up the Sleep Time in the TIME menu.■ You can also set up the Sleep Time in the TIME menu.2341ClockOff TimeOn TimeSleep Time GAuto SleepOff10 min20 min30 min60 min90 min120 min180 min240 minClock : Oct 19, 2006, 03:44 AMOff Time : OffOn Time : OffSleep Time : OffAuto Sleep : Off
TIME SETTINGAUTO SHUT-OFF SETTING73TV will be automatically turned off, in case of no signal inTV& input source or no remote control input for 10 minutes.Press the MMEENNUUbutton and then use DDor EEbutton toselect the TTIIMMEEmenu.Press the GG button and then use DDor EEbutton toselect AAuuttoo SSlleeeepp. Press the GG button and then use DDor EEbutton toselect OOnnor OOffff.Press EEXXIITTbutton to return to TV viewing or pressMMEENNUUbutton to return to the previous menu.TV INPUTSTBPICTURE SOUNDSAPCCMARK USB EJECTBACKTV INPUTSTBBACKPICTURESAPCCMARK USB EJECTTV INPUTTV INPUTSTBSTBBRIGHT +BRIGHT -TIMERRATIOSIMPLINKBACKPICTURE SOUNDCCMARK USB EJECTMENUTV INPUTSTBBACKPICTURE SOUNDSAPMARK USB EJECTTV INPUTSTBBACKSOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTClockOff TimeOn TimeSleep TimeAuto Sleep GOffOnTV will be automatically turned off, in case of No Signal for 10minutes.Clock : Oct 19, 2006, 03:44 AMOff Time : OffOn Time : OffSleep Time : OffAuto Sleep : Off2341
PARENTAL CONTROL / RATINGPARENTAL CONTROL / RATINGS74Parental Control can be used to block specific channels, ratings and other viewing sources.The Parental Control Function (V-Chip) is used to block program viewing based on the ratingssent by the broadcasting station. The default setting is to allow all programs to be viewed.Viewing can be blocked by choosing the type of the program and the categories. It is also possi-ble to block all program viewing for a time period. To use this function, the following must bedone :1. Set ratings and categories to be blocked.2. Specify a password3. Enable the lockV-Chip rating and categoriesRating guidelines are provided by broadcasting stations. Most television programs and televisionmovies can be blocked by TV Rating and/or Individual Categories. Movies that have been shownat the theaters or direct-to-video movies use the Movie Rating System (MPAA)only.Ratings for Television programs including made-for-TV movies:■TV-G (General audience)■TV-PG (Parental guidance suggested)■TV-14 (Parents strongly cautioned)■TV-MA (Mature audience only)■TV-Y (All children)■TV-Y7 (Children 7 years older)SET PASSWORD & LOCK SYSTEMSet up blocking schemes to block specific channels, ratings, andexternal viewing sources.A password is required to gain access to this menu.Press the MMEENNUUbutton and then use the DDor EEbutton toselect the LLOOCCKKmenu. Then, press the GG button.■Enter the password as requested.■The TV is set up with the initial password “0-0-0-0”.TV INPUTSTBPICTURE SOUNDSAPCCMARK USB EJECTBACKTV INPUTSTBBACKPICTURESAPCCMARK USB EJECTTV INPUTSTBBRIGHT +BRIGHT -TIMERRATIOSIMPLINKBACKPICTURE SOUNDCCMARK USB EJECTMENUTV INPUTSTBBACKPICTURE SOUNDSAPMARK USB EJECTTV INPUTSTBBACKSOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTMEDIA HOSTMEDIA HOSTSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTEnter Password1Setting up your Password
PARENTAL CONTROL / RATING75Lock SystemAfter inputting the password, use the DDor EEbuttonto choose LLoocckk SSyysstteemm.Press the GG button and then use the DDor EEto selectOOnnor OOffff.■When you select, the Lock System is enable.Press EEXXIITTbutton to return to TV viewing or pressMMEENNUUbutton to return to the previous menu.Enables or disables the blocking scheme you set up previously.231Lock System GSet PasswordBlock ChannelMovie RatingTV Rating-ChildrenTV Rating-GeneralInput BlockOffOnAfter inputting the password, use the DDor EEbutton tochoose SSeett ppaasssswwoorrdd.Press the GG button and then choose any 4 digits foryour new password and enter the them on the nneeww.As soon as the 4 digits are entered, reenter the same 4digits on the CCoonnffiirrmm.Then your changed password has been memorized.Press EEXXIITTbutton to return to TV viewing or pressMMEENNUUbutton to return to the previous menu.Change the password by inputting a new password twice. 231Lock SystemSet Password GBlock ChannelMovie RatingTV Rating-ChildrenTV Rating-GeneralInput BlockNewConfirmSet PasswordLock System : OffSet PasswordBlock ChannelMovie RatingTV Rating-ChildrenTV Rating-GeneralInput BlockFor USA For CanadaLock System : OffSet PasswordBlock ChannelTV Rating-EnglishTV Rating-FrenchInput BlockLock System : OffSet PasswordBlock ChannelMovie RatingTV Rating-ChildrenTV Rating-GeneralInput BlockFor USA For CanadaLock System : OffSet PasswordBlock ChannelTV Rating-EnglishTV Rating-FrenchInput Block
PARENTAL CONTROL / RATINGCHANNEL BLOCKINGPARENTAL CONTROL /RATINGS76Blocks any channels that you do not want to watch or thatyou do not want your children to watch. After inputting the password, use the DD or EE buttonto choose BBlloocckk CChhaannnneell.Press the GG button. You will now see a screen filled withchannel numbers and a preview picture. Use DDEE FFGG button to select a channel and then usethe EENNTTEERRbutton to block or unblock it.Press EEXXIITTbutton to return to TV viewing or pressMMEENNUUbutton to return to the previous menu.2341Lock SystemSet PasswordBlock Channel GMovie RatingTV Rating-ChildrenTV Rating-GeneralInput BlockSelection ( Gor ) leads you tothe block channel screen.Lock System : OffSet PasswordBlock ChannelMovie RatingTV Rating-ChildrenTV Rating-GeneralInput BlockFor USA For CanadaLock System : OffSet PasswordBlock ChannelTV Rating-EnglishTV Rating-FrenchInput Block
PARENTAL CONTROL / RATINGMOVIE & TV RATING77Movie Rating (MPAA) -for USA onlyBlocks movies according to the movie ratings limits speci-fied, so children cannot view certain movies. You can set theratings limit by blocking out all the movies with the ratingsabove a specified level. Keep in mind that the movie ratingslimit only applies to movies shown on TV, not TV programs,such as soap operas.After inputting the password, use the DD or EE buttonto choose MMoovviiee RRaattiinngg.Press the GG button and then use the DD or EE toselect GG, PPGG, PPGG--1133, RR, NNCC--1177or XX.■G (General audiences) ■PG (Parental guidance suggested)■PG-13 (Parents strongly cautioned) ■R (Restricted)■NC-17 (No one 17 and under admitted)■X (Adult only)■Blocking Off (Permits all programs) Press EEXXIITTbutton to return to TV viewing or pressMMEENNUUbutton to return to the previous menu.GGIf you set PG-13 : G and PG movies will be available,PG-13, R, NC-17 and X will be blocked.231Lock SystemSet PasswordBlock ChannelMovie Rating GTV Rating-ChildrenTV Rating-GeneralInput BlockBlocking off : permitsall programsGPGPG-13RNC-17XBlocking OffLock System : OffSet PasswordBlock ChannelMovie RatingTV Rating-ChildrenTV Rating-GeneralInput Block
PARENTAL CONTROL / RATINGTV Rating Children - for USA onlyPARENTAL CONTROL /RATINGS78After inputting the password, use the DDor EEbuttonto choose TTVV RRaattiinngg--CChhiillddrreenn.Press the GG button and then use the DDor EEto selectAAggee, or FFaannttaassyy VViioolleennccee.Press the GG button and then use the DD or EE button to select block options.■Age(applies to TV-Y, TV-Y7) ■Fantasy Violence(applies to TV-Y7)Press EEXXIITTbutton to return to TV viewing or pressMMEENNUUbutton to return to the previous menu.Prevents children from watching certain children's TVprograms, according to the ratings limit set. The childrenrating does not apply to other TV programs. Unless you blockcertain TV programs intended for mature audiences in the TVRating - sub menu, your children can view those programs.231Lock SystemSet PasswordBlock ChannelMovie RatingTV Rating-Children GTV Rating-GeneralInput BlockAgeFantasy ViolenceLock System : OffSet PasswordBlock ChannelMovie RatingTV Rating-ChildrenTV Rating-GeneralInput BlockTV Rating General - for USA onlyAfter inputting the password, use the DD or EE buttonto choose TTVV RRaattiinngg--GGeenneerraall.Press the GG button and then use the DD or EE buttonto select AAggee, DDiiaalloogguuee, LLaanngguuaaggee, SSeexxor VViioolleennccee.Press the GG button and then use the DD or EE buttonto select block options.■Age(applies to TV-G,TV-PG,TV-14,TV-MA)■Dialogue-sexual dialogue(applies to TV-PG,TV-14)■Language-adult language(applies to TV-PG,TV-14,TV-MA)■Sex-sexual situations(applies to TV-PG,TV-14,TV-MA)■Violence(applies to TV-PG,TV-14,TV-MA)Press EEXXIITTbutton to return to TV viewing or pressMMEENNUUbutton to return to the previous menu.Based on the ratings, blocks certain TV programs that youand your family do not want to view.231Lock SystemSet PasswordBlock ChannelMovie RatingTV Rating-ChildrenTV Rating-General GInput BlockAgeDialogueLanguageSexViolenceLock System : OffSet PasswordBlock ChannelMovie RatingTV Rating-ChildrenTV Rating-GeneralInput Block
PARENTAL CONTROL / RATINGTV Rating english - for CANADA only 79After inputting the password, use the DD or EE buttonto choose TTVV RRaattiinngg--EEnngglliisshh.Press the GG button and then use the DD or EE buttonto select EE, CC, CC88++, GG, PPGG, 1144++, 1188++, or BBlloocckkiinngg OOffff.■E(Exempt) ■C(Children)■C8+(Children eight years and older)■G(General programming, suitable for all audiences)■PG(Parental Guidance )■14+(Viewers 14 years and older)■18+(Adult programming)■Blocking Off(Permits all programs)Press EEXXIITTbutton to return to TV viewing or press MMEENNUUbutton to return to the previous menu.Selecting canadian english language rating system.After inputting the password, use the DD or EE buttonto choose TTVV RRaattiinngg--FFrreenncchh.Press the GG button and then use the DD or EE buttonto select EE, GG, 88 aannss++, 1133 aannss++, 1166 aannss++, 1188 aannss++, orBBlloocckkiinngg OOffff.■E(Exempt) ■G(General)■8 ans+(General-Not convenient for little children)■13 ans+(Not convenient for children of 13 years and younger)■16 ans+(Not convenient for children of 16 years and younger)■18 ans+(This programs is only for adults)■Blocking Off(Permits all programs)Press EEXXIITTbutton to return to TV viewing or pressMMEENNUUbutton to return to the previous menu.231231Lock SystemSet PasswordBlock ChannelTV Rating-English GTV Rating-FrenchInput BlockLock SystemSet PasswordBlock ChannelTV Rating-EnglishTV Rating-French GInput BlockTV Rating french - for CANADA only Selecting canadian french language rating system.Blocking off : permits all programsECC8+GPG14+18+Blocking OffBlocking off : permitsall programsEG8 ans+13 ans+16 ans+18 ans+Blocking OffLock System : OffSet PasswordBlock ChannelTV Rating-EnglishTV Rating-FrenchInput BlockLock System : OffSet PasswordBlock ChannelTV Rating-EnglishTV Rating-FrenchInput Block
PARENTAL CONTROL / RATINGEXTERNAL INPUT BLOCKINGPARENTAL CONTROL /RATINGS80Enables you to select a source to block from the externalsource devices you have hooked up.After inputting the password, use the DDor EEbutton tochoose IInnppuutt BBlloocckk.Press the GG button and then use the DDor EEto selecta source.Press the GG button and then use the FFor GG to selectOOnnor OOffffon the each source.Press EEXXIITTbutton to return to TV viewing or pressMMEENNUUbutton to return to the previous menu.2341Lock SystemSet PasswordBlock ChannelMovie RatingTV Rating-ChildrenTV Rating-GeneralInput Block GAV1 OnAV2 OnComponent1 OffComponent2 OnRGB-PCOffHDMI1 OnHDMI2 OffHDMI3 OffLock System : OffSet PasswordBlock ChannelMovie RatingTV Rating-ChildrenTV Rating-GeneralInput BlockFor USA For CanadaLock System : OffSet PasswordBlock ChannelTV Rating-EnglishTV Rating-FrenchInput BlockKEY LOCKThe TV can be set up so that it can only be used with theremote control. This feature can be used to prevent unauthorized viewing bylocking out the front panel controls.This TV is programmed to remember which option it waslast set to even if you turn the TV off.Press the MMEENNUUbutton and then use DDor EEbutton toselect the OOPPTTIIOONNmenu.Press the GG button and then use DDor EEbutton toselect KKeeyy LLoocckk. Press the GG button and then use DDor EEbutton toselect OOnnor OOffff.Press EEXXIITTbutton to return to TV viewing or pressMMEENNUUbutton to return to the previous menu.2341Language : EnglishInput LabelSimpLink : OffKey Lock : OffCaption : OffSet ID : 1LanguageInput LabelSimpLinkKey Lock GCaptionSet IDOffOn
APPENDIXTROUBLESHOOTING81APPENDIXNo picture & No soundNo or poor coloror poor picturePoor reception on some channelsLines or streaksin picturesHorizontal/vertical barsor picture shakingPicture appears slowly after switching on■Check whether the product is turned on.■Try another channel. The problem may be with the broadcast.■Is the power cord inserted into wall power outlet?■Check your antenna direction and/or location.■Test the wall power outlet, plug another product’s power cord into the outletwhere the product’s power cord was plugged in.■This is normal, the image is muted during the product startups process. Pleasecontact your service center, if the picture has not appeared after five minutes.■Adjust Color in menu option.■Keep a sufficient distance between the product and the VCR.■Try another channel. The problem may be with the broadcast.■Are the video cables installed properly?■Activate any function to restore the brightness of the picture. ■Check for local interference such as an electrical appliance or power tool.■Station or cable product experiencing problems, tune to another station.■Station signal is weak, reorient antenna to receive weaker station.■Check for sources of possible interference.■Check antenna (Change the direction of the antenna).TThhee ooppeerraattiioonn ddooeess nnoott wwoorrkk nnoorrmmaallllyy..The remote controldoesn’t workPower is suddenly turned off■Check to see if there is any object between the product and the remote controlcausing obstruction. Ensure you are pointing the remote control directly at the TV.■Ensure that the batteries are installed with correct polarity (+ to +, - to -).■Ensure that the correct remote operating mode is set: TV, VCR etc.■Install new batteries.■Is the sleep timer set?■Check the power control settings. Power interrupted.■No broadcast on station tuned with Auto off activated.TThhee vviiddeeoo ffuunnccttiioonn ddooeess nnoott wwoorrkk..
APPENDIXAPPENDIX82TThhee aauuddiioo ffuunnccttiioonn ddooeess nnoott wwoorrkk..TThheerree iiss aa pprroobblleemm iinn PPCC mmooddee.. ((OOnnllyy PPCC mmooddee aapppplliieedd))■Press the VOL or VOLUME button.■Sound muted? Press MUTE button.■Try another channel. The problem may be with the broadcast.■Are the audio cables installed properly?■Adjust Balance in menu option.■A change in ambient humidity or temperature may result in an unusual noisewhen the product is turned on or off and does not indicate a fault with theproduct.Picture OK & No soundUnusual sound frominsidethe productNo output from one of the speakers■Adjust resolution, horizontal frequency, or vertical frequency.■Check the input source.■Work the Auto configure or adjust clock, phase, or H/V position. (Option)■Check the signal cable.■Reinstall the PC video card.The signal is out of range(Invalid format)Screen color is unstableor single colorVertical bar or stripe on background &Horizontal Noise &Incorrect position
83APPENDIXMAINTENANCEEarly malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you canenjoy your new TV. Caution: Be sure to turn the power off and unplug the power cord before you begin any cleaning.Cleaning the ScreenHere’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarmwater and a little fabric softener or dish washing detergent. Wring the cloth until it’s almost dry, and thenuse it to wipe the screen.Make sure the excess water is off the screen, and then let it air-dry before you turn on your TV.Cleaning the Cabinet■To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth.■Please be sure not to use a wet cloth.Extended AbsenceIf you expect to leave your TV dormant for a long time (such as a vacation), it’s a good idea to unplugthe power cord to protect against possible damage from lightning or power surges.CAUTION21
APPENDIXPRODUCT SPECIFICATIONSAPPENDIX84■The specifications shown above may be changed without prior notice for quality improvement.42LBX(42LB9DF-UA)47LBX(47LB9DF-UA)52LBX(52LB9DF-UA)MODELS40.6 x 30.7 x 13.8 inches1030.0 x 781.0 x 350.0 mm40.6 x 27.3 x 3.5 inches1030.0 x 693.0 x 88.5 mm56.9 pounds / 25.8kg48.3 pounds / 21.9kg40.7 x 29.5 x 11.3 inches1033.1 x 750.0 x 287.6 mm40.7 x 27.0 x 3.5 inches1033.1 x 686.5 x 88.5 mm60.6 pounds / 27.5 kg50.7 pounds / 23.0 kg45.1 x 32.5 x 13.0 inches1144.5 x 825.6 x 331.0 mm45.1 x 29.7 x 4.1 inches1144.5 x 754.9 x 103.0 mm82.7 pounds / 37.5kg69.2 pounds / 31.4kgAC100-240V ~ 50/60HzNTSC-M, ATSC, 64 & 256 QAMVHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV 1-13575 ohm32 ~ 104°F (0 ~40°C)Less than 80%-4 ~ 140°F (-20 ~60°C)Less than 85%Dimensions(Width x Height x Depth)WeightPower requirementTelevision SystemProgram CoverageExternal Antenna ImpedanceEnvironment conditionIncluding standExcluding standincluding standexcluding standOperating TemperatureOperating HumidityStorage TemperatureStorage Humidity
APPENDIXPROGRAMMING THE REMOTE CONTROL85Programming a code into a remote modeTo find out whether your remote control can operate each device without programming, turn on the device(such as a VCR) and press the corresponding mode button on the remote. After that, press the PPOOWWEERRbutton. If the device is turned off and it responds properly the remote controlneed not be programmed. If not, the remote should be programmed to operate the device. The program-ming procedures are explained below.Press the MMEENNUUand MMUUTTEEbutton continuously at the same time for two seconds; the currently selecteddevice button is illuminated. If you don't press any button for 20 seconds, the light on the mode button will be turned off. In that case,you have to repeat from step 2.Enter the appropriate code from the code table on the following pages. When pressing the button, the lightblinks at a time. If the device turned off, the programming is successful.Press the MMEENNUUbutton to store the code. After blinking twice, this code is stored.Test the remote control functions to see if the device responds properly. If not, steps 2-5.The provided universal remote control can be programmed to operate most remote-controllable devices.Note that the remote may not control all models of other brands.23451
APPENDIXRemote control codeAPPENDIX86VCRsBrand Codes Brand Codes Brand CodesAIWA 034AKAI 016 043 046 124125 14 6AMPRO 072ANAM 031 033 103AUDIO DYNAMICS012 023 039 043BROKSONIC 035 037 129CANON 028 031 033CAPEHART 108CRAIG 003 040 135CURTIS MATHES 031 033 041DAEWOO 005 007 010 0640 6 5 10 8 110 111112 116 117 119DAYTRON 108DBX 012 023 039 043DYNATECH 034 053ELECTROHOME 059EMERSON 006 017 025 027029 031 034 035036 037 046 101129 131 138 153FISHER 003 008 009 010FUNAI 034GE 031 033 063 072107 109 144 147GO VIDEO 132 136HARMAN KARDON 012 045HITACHI 004 018 026 034043 063 137 150INSTANTREPLAY 031 033JCL 031 033JCPENNY 012 013 015 033040 066 101JENSEN 043JVC 012 031 033 043048 050 055 060130 150 152KENWOOD 014 034 039 043047 048LG (GOLDSTAR) 001 012 013 020101 106 114 123 LLOYD 034LXI 003 009 013 014017 034 101 106MAGIN 040MAGNAVOX 031 033 034 041067 068012 031 033 067MARANTZ 069MARTA 101MATSUI 027 030MEI 031 033MEMOREX 003 010 014 031033 034 053 072101 102 134 139MGA 045 046 059MINOLTA 013 020MITSUBISHI 013 020 045 046049 051 059 061151MTC 034 040MULTITECH 024 034NEC 012 023 039 043048NORDMENDE 043OPTONICA 053 054PANASONIC 066 070 074 083133 140 145PENTAX 013 020 031 033063PHILCO 031 034 067PHILIPS 031 033 034 054067 071 101PILOT 101PIONEER 013 021 048PORTLAND 108PULSAR 072QUARTZ 011 014QUASAR 033 066 075 145RCA 013 020 033 034040 041 062 063107 109 140 144145 147REALISTIC 003 008 010 014031 033 034 040053 054 101RICO 058RUNCO 148SALORA 014SAMSUNG 032 040 102 104105 107 10 9 112113 115 12 0 12 2125SANSUI 022 043 048 135SANYO 003 007 010 014102 134SCOTT 017 037 112 129131SEARS 003 008 009 010013 014 017 020031 042 073 081101SHARP 031 054 149SHINTOM 024SONY 003 009 031 052056 057 058 076077 078 149SOUNDESIGN 034STS 013SYLVANIA 031 033 034 059067SYMPHONIC 034TANDY 010 034TATUNG 039 043TEAC 034 039 043TECHNICS 031 033 070TEKNIKA 019 031 033 034101THOMAS 034TMK 006TOSHIBA 008 013 042 047059 082 112 131TOTEVISION 040 101UNITECH 040VECTOR RESEARCH012VICTOR 048VIDEO CONCEPTS012 034 046VIDEOSONIC 040WARDS 003 013 017 024031 033 034 040053 054 131YAMAHA 012 034 039 043ZENITH 034 048 056058 072 080 101
APPENDIX87Cable BoxBrand Codes Brand Codes Brand CodesBrand Codes Brand Codes Brand CodesHDSTBABC 003 004 039 042046 052 053AJIN 112ANTRONIK 014ARCHER 005 007 014 024CABLE STAR 026CENTURION 092CENTURY 007CITIZEN 007COLOUR VOICE 065 090COMBANO 080 081COMTRONICS 019 030DIAMOND 023EAGLE 020 030 040EASTERN 057 062 066ELECTRICORD 032GE 072GEMINI 008 022 025 054GI 052 074GOLDEN CHANNEL030HAMLIN 049 050 055HITACHI 052 055HOSPITALITY 070 077JERROLD 002 003 004 008009 010 052 069074LG (GOLDSTAR) 001 106 101 005 M-NET 037MACOM 033MAGNAVOX 010 012 064 079MEMOREX 100MOVIE TIME 028 032NSC 015 028 038 071073OAK 016 031 037 053PANASONIC 044 047PARAGON 100PHILIPS 006 012 013 020065 085 090PIONEER 034 051 052 063076POST NEWS WEEK016PRUCER 059PTS 011 048 071 072073 074PULSAR 100RCA 047REGAL 049 050REGENCY 057REMBRANT 025SAMSUNG 102 107 030 068SCIENTIFIC ATLANTA003 011 041 042043 045 046SHERITECH 022SIGNAL 030SIGNATURE 052SL MARX 030SPRUCER 047 078STARCOM 002 004 008 009STARGATE 008 030TADIRAN 030TAEKWANG 110TAIHAN 105TANDY 017TEXSCAN 029TOCOM 039 040 056TOSHIBA 100UNIKA 007 014 024UNITED CABLE 004 053UNIVERSAL 005 007 014 024026 027 032 035VIEWSTAR 012 015 018 086087 088 089ZENITH 100 114 060 093ALPHASTAR DSR 123AMPLICA 050BIRDVIEW 051 126 129CHANNEL MASTER013 014 015 018036 055CHAPARRAL 008 009 012 077CITOH 054CURTIS MATHES 050 145DRAKE 005 006 007 010 011 052 112 116141DX ANTENNA 024 046 056 076ECHOSTAR 038 040 057 058093 094 095 096097 098 099 100122ELECTRO HOME 089EUROPLUS 114FUJITSU 017 021 022 027133 134GENERAL INSTRUMENT003 004 016 029031 059 101HITACHI 139 140HOUSTON TRACKER033 037 039 051057 104HUGHES 068JANIEL 060 147JERROLD 061KATHREIN 108LEGEND 057LG 001LUTRON 132LUXOR 062 144MACOM 010 059 063 064065MEMOREX 057NEXTWAVE 028 124 125NORSAT 069 070PACE SKY SATELLITE143PANASONIC 060 142PANSAT 121PERSONAL CABLE 117PHILIPS 071PICO 105PRESIDENT 019 102PRIMESTAR 030 110 111PROSAT 072RCA 066 106REALISTIC 043 074SAMSUNG 123SATELLITE SERVICE CO028 035 047 057085SCIENTIFIC ATLANTA032 138SONY 103STARCAST 041SUPER GUIDE 020 124 125TEECOM 023 026 075 087088 090 107 130137TOSHIBA 002 127UNIDEN 016 025 042 043044 045 048 049078 079 080 086101 135 136VIEWSTAR 115WINEGARD 128 146ZENITH 081 082 083 084 091 120
APPENDIXAPPENDIX88Brand Codes Brand Codes Brand CodesBrand Codes Brand Codes Brand CodesDVDAudioAIWA 014 028 070 096125 129 139 229230AKAI 163ANAM 003 014 017 023059 106 189 216217 235 236BURMECTER 252CARVER 086CLARION 199DAEWOO 027 053 060 084102 148 198 221DENON 015 075 130 143FANTASIA 071FINEARTS 022FISHER 089 099LG(GOLDSTAR) 001 021 024 029087 107 108 110190 191 192 210211 212 239HAITAI 034 035 188 222HARMAN/KARDON 068JVC 004 013 141KEC 185 186 187KOHEL 030NAD 045 046KENWOOD 038 050 067 089170 171 197 2 0 6215 222INKEL 037 058 062 069078 079 095 121122 14 9 150 151152 153 15 4 15 5 157 15 8 15 9 16 0189 207 222 224 225 226 227 243 247LOTTE 014 016 036 09810 0 172 17 3 174 175 176 177 178179 18 0 181 183201 202 208 213214 219 223 232 238 240LXI 103MAGNAVOX 111MARANTZ 002 018 020 025034 041 081 090097 112MCINTOSH 049MCS 104MEMOREX 107NAD 046 ONKYO 013 040 041 047048 056 057 132133 14 0OPTIMUS 158PANASONIC 007 033 064 113142 220 241 251PENNEY 104PHILIPS 026 112 143PIONEER 039 042 043 063065 091 093 094115 12 3 12 7 2 5 0QUASAR 113RCA 080RCX 092REALISTIC 103 106 SAMSUNG 124 145 146 182 193 19 4 195 203204 244 245 246SANSUI 011 135 138 144SANYO 019 083 234SCOTT 106 186SHARP 031 032 051 052072 082 117 119156 184 199 200 206 209SHERWOOD 005 006 158SONY 044 045 109 114118 12 6 24 8 2 4 9 TAEKWANG 012 020 073 074076 077 105 161162 163 16 4 16 5166 167 16 8 16 9205 231 233 242TEAC 010 085 106 13618 5 18 7 2 37TECHNICS 101 113 128 134 14 7 218 TOSHIBA 137THE 061VICTOR 088 131WARDS 089YAMAHA 054 055 066 092 199APEX DIGITAL 022DENON 020 014GE 005 006HARMAN KARDON 027JVC 012LG 001 010 016 025MAGNAVOX 013MARANTZ 024MITSUBISHI 002NAD 023ONKYO 008 017PANASONIC 003 009PHILIPS 013PIONEER 004 026PROCEED 021PROSCAN 005 006RCA 005 006SAMSUNG 011 015SONY 007THOMPSON 005 006TOSHIBA 019 008YAMAHA 009 018ZENITH 010 016 025
APPENDIXIR CODES89■Configuration of frame 1st frameRepeat frame■Lead code■Repeat code■BBiitt ddeessccrriippttiioonn■FFrraammee iinntteerrvvaall:: TTff The waveform is transmitted as long as a key is depressed.C0C1C2C3C4C5C6C7D0D1D2D3D4D5D6D7Lead code Low custom codeHigh custom codeData codeData codeRepeat codeTf4.5ms9 ms2.25 ms9 ms0.55 ms0.56ms1.12 ms0.56ms2.24 msTfTfTf=108ms@455KHzBit ”0” Bit ”1”1. How to Connect■Connect your wired remote control to the Remote Control port on the TV. 2. Remote Control IR Codes■Output waveform Single pulse, modulated with 37.917KHz signal at 455KHz T1TcCarrier frequencyFCAR = 1/TC = fOSC/12Duty ratio = T1/TC = 1/3
APPENDIXAPPENDIX90Code Function Note(Hexa) Code Function Note(Hexa)0F TV INPUT Remote Control Button0B INPUT Remote Control Button08 POWERRemote Control Button (Power On/Off)79 RATIO Remote Control Button0E TIMER Remote Control Button10-19 Number Key 0-9 Remote Control Button4C - (Dash) Remote Control Button1A BACK Remote Control Button09 MUTE Remote Control Button02 VOL DDRemote Control Button03 VOL EERemote Control Button00 CH DDRemote Control Button01 CH EERemote Control Button1E FAV Remote Control Button39 CC Remote Control Button40 DDRemote Control Button41 EERemote Control Button07 FF Remote Control Button06 GGRemote Control Button44 ENTER Remote Control Button34 BRIGHT- Remote Control Button43 MENU Remote Control Button33 BRIGHT+ Remote Control Button52 SOUND Remote Control Button4D PICTURE Remote Control Button5B EXIT Remote Control Button7E SIMPLINK Remote Control Button0A SAP Remote Control ButtonD6 TV Discrete IR Code (TV Input Selection)5A AV1 Discrete IR Code (AV1 Input Selection)D0 AV2 Discrete IR Code (AV2 Input Selection)BF COMPONENT1 Discrete IR Code (Component1 Input Selection)D4 COMPONENT2 Discrete IR Code (Component2 Input Selection)D5 RGB-PC Discrete IR Code (RGB-PC Input Selection)CE HDMI1 Discrete IR Code (HDMI1 Input Selection)CC HDMI2 Discrete IR Code (HDMI2 Input Selection)76 Ratio 4:3 Discrete IR Code (Only 4:3 Mode)77 Ratio 16:9 Discrete IR Code (Only 16:9 Mode)AF Ratio Zoom Discrete IR Code (Only Zoom1 Mode)C4 POWER ON Discrete IR Code (Only Power On)C5 POWER OFF Discrete IR Code (Only Power Off)7C MEDIA HOST R/C Button7D MARK R/C ButtonCA USB EJECT R/C Button
APPENDIXEXTERNAL CONTROL THROUGH RS-232C91RS-232C SetupConnect the RS-232C (serial port) input jack to an external control device (such as a computeror an A/V control system) to control the product’s functions externally.Connect the serial port of the control device to the RS-232C jack on the product back panel.Note: RS-232C connection cables are not supplied with the product.PCType of Connector; D-Sub 9-Pin MaleNo. Pin Name1 No connection2 RXD (Receive data)3 TXD (Transmit data)4 DTR (DTE side ready)5 GND6 DSR (DCE side ready)7 RTS (Ready to send)8 CTS (Clear to send)9 No Connection
APPENDIXAPPENDIX92Press the MMEENNUUbutton and then use DDor EEbuttonto select the OOPPTTIIOONNmenu.Press the GG button and then use DDor EEbutton toselect SSEETT IIDD.Press the GG button and then use DDor EEbutton toadjust SSEETT IIDDto choose the desired TV ID number.The adjustment range of SET ID is 1~99.Press EEXXIITTbutton to return to TV viewing or pressMMEENNUUbutton to return to the previous menu.Use this function to specify a TV ID number. Refer to ‘Real Data Mapping 1’. pp..9955Set IDTV INPUTSTBPICTURE SOUNDSAPCCMARK USB EJECTBACKTV INPUTSTBBACKPICTURESAPCCMARK USB EJECTTV INPUTSTBBRIGHT +BRIGHT -TIMERRATIOSIMPLINKBACKPICTURE SOUNDCCMARK USB EJECTMENUTV INPUTSTBBACKPICTURE SOUNDSAPMARK USB EJECTTV INPUTSTBBACKSOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTTV INPUTSTBBACKPICTURE SOUNDSAPCCMARK USB EJECTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTMEDIA HOSTCommunication Parameters■Baud rate : 9600 bps (UART)■Data length : 8 bits■Parity : None■Stop bit : 1 bit■Communication code : ASCII code■Use a crossed (reverse) cable.RS-232C Configurations7-Wire Configurations (Standard RS-232C cable)PC PDPRXD 2 3 TXDTXD 3 2 RXDGND 5 5 GNDDTR 4 6 DSRDSR 6 4 DTRRTS 7 8 CTSCTS 8 7 RTSD-Sub 9 D-Sub 93-Wire Configurations(Not standard)PC PDPRXD 2 3 TXDTXD 3 2 RXDGND 5 5 GNDDTR 4 6 DTRDSR 6 4 DSRRTS 7 7 RTSCTS 8 8 CTSD-Sub 9 D-Sub 92341Language : EnglishInput labelSimpLink : OffKey Lock : OffCaption : OffSet ID : 1LanguageInput labelSimpLinkKey LockCaptionSet ID G1NOTEThis product has command echo back in the RS-232C Command.
APPENDIX93Command Reference ListCCOOMMMMAANNDD11CCOOMMMMAANNDD22DATA(Hexadecimal)CCOOMMMMAANNDD11CCOOMMMMAANNDD22DATA(Hexadecimal)01. Power k a 0 ~102. Input Select k b 0 ~903. Aspect Ratio k c *04. Screen Mute k d 0 ~105. Volume Mute k e 0 ~106. Volume Control k f 0 ~6407. Contrast k g 0 ~6408. Brightness k h 0 ~6409. Color k i 0 ~6410. Tint k j 0 ~6411. Sharpness k k 0 ~6412. OSD Select k l 0 ~113. Remote Control/Key Lock14. Treble k r 0 ~6415. Bass k s 0 ~6416. Balance k t 0 ~6417.Color Temperature k u 0 ~318. Red adjustment k v 0 ~C819. Green adjustment k w 0 ~C820. Blue adjustment k $ 0 ~C8k m 0 ~121. Tune Command22. Channel Add/Del23. Key24. Input Select25. Back LightCCOOMMMMAANNDD11CCOOMMMMAANNDD22DATA0(Hexadecimal)DATA1(Hexadecimal)DATA2(Hexadecimal)DATA3(Hexadecimal)DATA4(Hexadecimal)DATA5(Hexadecimal)physical major major low minor high minor low attributeprogram high program lowm a mb0~1m c key codexb*m g 0~64
APPENDIXAPPENDIX94Transmission / Receiving ProtocolTTrraannssmmiissssiioonn[Command 1] : First command to control the set.(j, k, m or x)[Command 2] : Second command to control the set.[Set ID] : You can adjust the set ID to choose desired TV IDnumber in Setup menu. Adjustment range is 1~99.When selecting Set ID ‘0’, every connected the TVis controlled. Set ID is indicated as decimal (1~99)on menu and as Hexa decimal (0x0~ 0x63)ontransmission/receiving protocol.[DATA] : To transmit command data.Transmit ‘FF’ data to read status of command.[Cr] : Carriage ReturnASCII code ‘0x0D’[ ] : ASCII code ‘space (0x20)’*In this model, TV will not send the status during the standbymode.OOKK AAcckknnoowwlleeddggeemmeennttThe TV transmits ACK (acknowledgement) based on thisformat when receiving normal data. At this time, if the datais data read mode, it indicates present status data. If thedata is data write mode, it returns the data of the PC com-puter.*in this model, TV will not send the status during the standbymode.*data format[command 2] : use as command.[Set ID] : use the small character, if set ID is 10, it will sendthe ‘0’,’a’[Data] : use the small character, if data is 0xab, it will sendthe ‘a’, ‘b’[OK] : use the large character*in this model, TV will send the echo, CR, LF with ack mes-sage.When it send the power on ack message, it will be like below.Ex) ka 01 01(CR)(LF)a 01 OK01x(CR)(LF)[[CCoommmmaanndd11]][[CCoommmmaanndd22]][[ ]][[SSeett IIDD]][[ ]][[DDaattaa]][[CCrr]][[CCoommmmaanndd22]][[ ]][[SSeett IIDD]][[ ]][[OOKK]][[DDaattaa]][[xx]]EErrrroorr AAcckknnoowwlleeddggeemmeennttThe TV transmits ACK (acknowledgement) based on thisformat when receiving abnormal data from non-viable func-tions or communication errors.Data1: Illegal CodeData2: Not supported functionData3: Wait more time*in this model, TV will not send the status duringthe standby mode.*data format[command 2] : use as command.[Set ID] : use the small character, if set ID is 10, itwill send the ‘0’,’a’[Data] : use the small character, if data is 0xab, itwill send the ‘a’, ‘b’[NG] : use the large character*in this model, TV will send the echo, CR, LF withack message.When it send the power on ack message, it will belike below.Ex) ka 01 01(CR)(LF)a 01 NG01x(CR)(LF)[[CCoommmmaanndd22]][[ ]][[SSeett IIDD]][[ ]][[NNGG]][[DDaattaa]][[xx]]
APPENDIX950011..PPoowweerr ((CCoommmmaanndd22::aa))To control Power On/Off of the TV.Transmission [k][a][ ][Set ID][ ][Data][Cr]Data 0 : Power Off Data 1 : Power OnAcknowledgement [a][ ][Set ID][ ][OK/NG][Data][x]* In a like manner, if other functions transmit ‘FF’ databased on this format, Acknowledgement data feedbackpresents status about each function.* Note: In this model, TV will send the Acknowledgeafter power on processing completion.There might be a time delay between command andacknowledge.0022.. IInnppuutt SSeelleecctt ((CCoommmmaanndd22::bb)) ((MMaaiinn PPiiccttuurree IInnppuutt))To select input source for the TV.Transmission [k][b][ ][Set ID][ ][Data][Cr]Data 0: DTV Data 1: AnalogData 2: AV1 Data 3: AV2Data 4: Component 1 Data 5: Component 2Data 6: RGB-PC Data 7: HDMI1Data 8: HDMI2 Data 9: HDMI3Acknowledgement [b][ ][Set ID][ ][OK/NG][Data][x]0033.. AAssppeecctt RRaattiioo ((CCoommmmaanndd22::cc)) ((MMaaiinn ppiiccttuurree ffoorrmmaatt))To adjust the screen format.You can also adjust the screen format using the RATIObutton on remote control or in the Picture menu.Transmission [k][c][ ][Set ID][ ][Data][Cr]Data 1: 4:3 4: Zoom 12: 16:9 5: Zoom 26: Set by programReservedAcknowledgement [c][ ][Set ID][ ][OK/NG][Data][x]0044..SSccrreeeenn MMuuttee ((CCoommmmaanndd22::dd))To select screen mute on/off.Transmission [k][d][ ][Set ID][ ][Data][Cr]Data 0 : Screen mute off (Picture on)Data 1 : Screen mute on (Picture off)Acknowledgement [d][ ][Set ID][ ][OK/NG][Data][x]0055.. VVoolluummee MMuuttee ((CCoommmmaanndd22::ee))To control volume mute on/off.You can also adjust mute using the MUTE button onremote control.Transmission [k][e][ ][Set ID][ ][Data][Cr]Data 0 : Volume mute on (Volume off)Data 1 : Volume mute off (Volume on)Acknowledgement [e][ ][Set ID][ ][OK/NG][Data][x]0066.. VVoolluummee CCoonnttrrooll ((CCoommmmaanndd22::ff))To adjust volume.You can also adjust volume with the volume buttons onremote control.Transmission [k][f][ ][Set ID][ ][Data][Cr]Data Min : 0 ~Max : 64Refer to ‘Real data mapping 1’ as shown below.Acknowledgement [f][ ][Set ID][ ][OK/NG][Data][x]0077.. CCoonnttrraasstt ((CCoommmmaanndd22::gg))To adjust screen contrast. You can also adjust contrast in the Picture menu.Transmission [k][g][ ][Set ID][ ][Data][Cr]Data Min : 0 ~Max : 64*Refer to ‘Real data mapping 1’ as shown below.Acknowledgement [g][ ][Set ID][ ][OK/NG][Data][x]0088..BBrriigghhttnneessss ((CCoommmmaanndd22::hh))To adjust screen brightness.You can also adjust brightness in the Picture menu.Transmission [k][h][ ][Set ID][ ][Data][Cr]Data Min : 0 ~Max : 64(*transmit by Hexadecimal code)*Refer to ‘Real data mapping 1’ as shown below.Acknowledgement [h][ ][Set ID][ ][OK/NG][Data][x]*Real data mapping 10 : Step 0A : Step 10 (SET ID 10)F : Step 15 (SET ID 15)10 : Step 16 (SET ID 16)63 : Step 99 (SET ID 99)64 : Step 100
APPENDIXAPPENDIX960099.. CCoolloorr ((CCoommmmaanndd22::ii))To adjust the screen color.You can also adjust color in the Picture menu.Transmission [k][i][ ][Set ID][ ][Data][Cr]Data Min : 0 ~Max : 64*Refer to ‘Real data mapping 1’. See page 95.Acknowledgement [i][ ][Set ID][ ][OK/NG][Data][x]1100.. TTiinntt ((CCoommmmaanndd22::jj))To adjust the screen tint.You can also adjust tint in the Picture menu.Transmission [k][j][ ][Set ID][ ][Data][Cr]Data Red : 0 ~Green : 64*Refer to ‘Real data mapping 1’. See page 95.Acknowledgement [ j ][ ][Set ID][ ][OK/NG][Data][x]1111.. SShhaarrppnneessss ((CCoommmmaanndd22::kk))To adjust the screen sharpness.You can also adjust sharpness in the Picture menu.Transmission [k][k][ ][Set ID][ ][Data][Cr]Data Min: 0 ~Max: 64*Refer to ‘Real data mapping 1’. See page 95.Acknowledgement [k][ ][Set ID][ ][OK/NG][Data][x]1122.. OOSSDD SSeelleecctt ((CCoommmmaanndd22::ll))To select OSD (On Screen Display) on/off.Transmission [k][l][ ][Set ID][ ][Data][Cr]Data 0: OSD off Data 1: OSD onAcknowledgement [l][ ][Set ID][ ][OK/NG][Data][x]1133.. RReemmoottee CCoonnttrrooll LLoocckk MMooddee ((CCoommmmaanndd22::mm))To lock the remote control and the front panel controlson the set.Transmission [k][m][ ][Set ID][ ][Data][Cr]Data 0: Lock off Data 1: Lock onAcknowledgement [m][ ][Set ID][ ][OK/NG][Data][x]If you’re not using the remote control and front panelcontrols on the TV, use this mode. When main power ison/off, remote control lock is released.1144TTrreebbllee ((CCoommmmaanndd22::rr))To adjust treble. You can also adjust treble in the Audio menu.Transmission [k][r][ ][Set ID][ ][Data][Cr]Data Min: 0 ~Max: 64(*transmit by Hexadecimal code)*Refer to ‘Real data mapping 1’. See page 95.Acknowledgement [r][ ][Set ID][ ][OK/NG][Data][x]1155..BBaassss ((CCoommmmaanndd22::ss))To adjust bass.You can also adjust bass in the Audio menu.Transmission [k][s][ ][Set ID][ ][Data][Cr]Data Min: 0 ~Max: 64(*transmit by Hexadecimal code)*Refer to ‘Real data mapping 1’. See page 95.Acknowledgement [s][ ][Set ID][ ][OK/NG][Data][x]1166.. BBaallaannccee ((CCoommmmaanndd22::tt))To adjust balance.You can also adjust balance in the Audio menu.Transmission [k][t][ ][Set ID][ ][Data][Cr]Data Min: 0 ~Max: 64(*transmit by Hexadecimal code)*Refer to ‘Real data mapping 1’. See page 95.Acknowledgement [t][ ][Set ID][ ][OK/NG][Data][x]1177.. CCoolloorr TTeemmppeerraattuurree ((CCoommmmaanndd22::uu))To adjust color temperature.You can also adjust color temperature in the Picturemenu.Transmission [k][u][ ][Set ID][ ][Data][Cr]Data 0: Medium 1: Cool 2: Warm 3: UserAcknowledgement [u][ ][Set ID][ ][OK/NG][Data][x]1188.. RReedd aaddjjuussttmmeenntt((CCoommmmaanndd::vv))To adjust red in color temperature Transmission [k][v][ ][Set ID][ ][Data][Cr]Data Min:0 ~ Max:C8*Refer to "Real data mapping 2". See page 97.Acknowledgement [v][ ][Set ID][ ][OK/NG][Data][x]1199.. GGrreeeenn aaddjjuussttmmeenntt((CCoommmmaanndd::ww))To adjust green in color temperature.Transmission [k][w][ ][Set ID][][Data][Cr]Max:C8*Refer to "Real data mapping 2". See page 97.Acknowledgement [w][ ][Set ID][ ][OK/NG][Data][x]
APPENDIX972200.. BBlluuee aaddjjuussttmmeenntt((CCoommmmaanndd::$$))To adjust blue in color temperature.Transmission [k][$][ ][Set ID][][Data][Cr]Data Min:0 ~Max:C8*Refer to ‘Real data mapping 2’ as shown below.Acknowledgement [$][ ][Set ID][][OK/NG][Data][x]]*Real data mapping 20 : -205 : -19A : -185F: -164: 069: +1C3 : +19C8 : +202211.. TTuunnee CCoommmmaanndd ((CCoommmmaanndd:: mm aa))To tune channel to following physical/major/minor number.Transmission [m][a][ ][Set ID][ ][Data0][ ][Data1] [ ][Data2][ ][Data3][ ][Data4][ ][Data5][Cr]Data 0: Physical Channel Number(Transmit byHexadecimal code) NTSC air:02~45NTSC cable: 01, 0E~7DATSC air:01~45ATSC cable:01~87Data1,Data2: Major Channel Number (two part) / Channel Number (One part) Data1: High byteData2: Low byteTwo part channel number: Major number-Minor numberOne part channel number: If the channel band is ATSC digital cable, it canbe used. In case of using one part channel num-ber, minor channel does not need. Data3, Data 4: Minor Channel Number Data3: High byte , Data4: Low byte
APPENDIXAPPENDIX98Data5:All data are transmitted by Hexadecimal code* Two/One part Channel: 6th bitThis bit is used in a cable-ready system.* Using physical channel: 5th bitIf the channel band is NTSC air or NTSC cable, channeltuning can be done by only physical channel. In thiscase, using physical channel bit must be low(0).But if the channel band is ATSC air or ATSC cable, thereare two cases that physical channel enable or disable.If the physical channel sending is meaningful, you shouldset this bit low(0). If the physical channel sending ismeaningless, you should set this bit high(1).Example)1. Analog channel: NTSC cable, channel number(35),main picture Command: ma 00 23 xx xx xx xx 01attribute(0x01): main picture, two part(it’s notmandatory), using physical channel, NTSC cable ‘xx’data: don’t care major and minor channel number incase analog channel tuning. 2. Digital channel: ATSC air, channel number(don’t knowphysical channel, major(30), minor(3)), sub pictureCommand: ma 00 xx 00 1E 00 03 A2attribute(0xA2): sub picture, two part, not usingphysical channel, ATSC air ‘xx’ data: don’t care analogchannel number in case digital channel tuning.3. Digital channel: ATSC air, channel number(physi-cal(20),major(20), minor(3)), sub picture Command:ma 00 14 00 14 00 03 82 attribute(0x82): sub picture, two part, using physicalchannel, ATSC air.Acknowledgement[a][ ][Set ID][ ][OK][Data0][Data1][Data2][Data3][Data4][x][a][ ][Set ID][ ][NG][Data0][x]2222.. CChhaannnneell AAdddd//DDeell ((CCoommmmaanndd:: mm bb))To add and delete the channelsTransmission [m][b][ ][Set ID][ ][Data][Cr]Data 0: Channel Delete Data 1: Channel AddAcknowledgement [b][ ][Set ID][ ][OK/NG][Data][x]2233.. KKeeyy ((CCoommmmaanndd:: mm cc))To send IR remote key code.Transmission [m][c][ ][Set ID][ ][Data][Cr]sData Key code: Refer to page 90.Acknowledgement [c][ ][Set ID][ ][OK/NG][Data][x]2244.. IInnppuutt sseelleecctt((CCoommmmaanndd:: xx bb)) ((MMaaiinn PPiiccttuurree IInnppuutt))To select input source for TV. Transmission [x][b][ ][Set ID][][Data][Cr]Data 00 : DTV (Antenna) Data 01 : DTV (Cable)Data 10 : Analog (Antenna) Data 11 : Analog (Cable)Data 20 : AV1 Data 21 : AV2Data 40 : Component 1 Data 41 : Component 2Data 60 : RGB-PC Data 90 : HDMI1Data 91 : HDMI2 Data 92 : HDMI3Acknowledgement [b][ ][Set ID][ ][OK/NG][Data][x]2255.. BBaacckk lliigghhtt((CCoommmmaanndd:: mm gg))To adjust screen back light. Transmission [m][g][ ][Set ID][ ][Data][Cr]Data Min:0 ~ Max:64Acknowledgement [g][ ][Set ID][ ][OK/NG][Data][x]StepNTSC AirNTSC CableATSC AirATSC Cable_std ATSC Cable_hrcATSC Cable_ircATSC cable_autoReserved...Reserved100110011x1200001111x1300000000x14xxxxxxxxxxReserved501UseNo UseUsing PhysicalChannel601TwoOneTwo/One Part Channel701MainSubMain/Sub Picture 001010101x1

Navigation menu