LG Electronics USA 60LM6450UA LED LCD TV Monitor User Manual EMISSION TEST REPORT

LG Electronics USA LED LCD TV Monitor EMISSION TEST REPORT

Users Manual

Order Number : GETEC-C1-12-217 FCC Part 15 subpart B Test Report Number : GETEC-E3-12-082 Page 1 / 1 EUT Type: LED LCD TV/Monitor FCC ID.: BEJ60LM6450UA APPENDIX G : USER’S MANUAL
www.lg.comPlease read this manual carefully before operating your set and retain it for future reference.P/NO : MFL67468132 (1206-REV05)OWNER’S MANUALLED LCD TVLM6200 seriesLM6250 seriesLM6400 seriesLM6450 seriesLM6700 seriesLM7600 series
y Do not use this apparatus near water.y Clean only with a dry cloth.y Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.y Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.y Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet (Can differ by country).IMPORTANT SAFETY INSTRUCTIONSAlways comply with the following precautions to avoid dangerous situations and ensure peak performance of your product.Read these instructions.Keep these instructions.Heed all warnings.Follow all instructions.WARNING/CAUTIONRISK OF ELECTRIC SHOCKDO NOT OPENTO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.WARNING/CAUTION- TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.Wash hands after handling.ENGLISH2IMPORTANT SAFETY INSTRUCTIONS
y Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.y Only use attachments/accessories specified by the manufacturer.y Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.y Unplug this apparatus during lightning storms or when unused for long periods of time.y Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.y Do not stick metal objects or any other conductive material into the power cord. Do not touch the end of the power cord while it is plugged in.y Keep the packing anti-moisture material or vinyl packing out of the reach of children. Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the patient to vomit and visit the nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children.y CAUTION concerning the Power Cord (Can differ by country): It is recommended that appliances be placed upon a dedicated circuit; that is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner’s manual to be certain. Do not connect too many appliances to the same AC power outlet as this could result in fire or electric shock. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized service. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. Do not move the TV with the power cord plugged in. Do not use a damaged or loose power cord. Be sure do grasp the plug when unplugging the power cord. Do not pull on the power cord to unplug the TV.ENGLISH3IMPORTANT SAFETY INSTRUCTIONS
y Warning - To reduce the risk of fire or electrical shock, do not expose this product to rain, moisture or other liquids. Do not touch the TV with wet hands. Do not install this product near flammable objects such as gasoline or candles, or expose the TV to direct air conditioning.y Do not expose to dripping or splashing and do not place objects filled with liquids, such as vases, cups, etc. on or over the apparatus (e.g. on shelves above the unit).y Grounding(Except for devices which are not grounded.) Ensure that you connect the earth ground wire to prevent possible electric shock (i.e. a TV with a three-prong grounded AC plug must be connected to a three-prong grounded AC outlet). If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes.Short-circuitBreakerPower Supply y DISCONNECTING DEVICE FROM THE MAIN POWERMains plug is the disconnecting device. The plug must remain readily operable.y As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if the unit is turned off.y Do not attempt to modify this product in any way without written authorization from LG Electronics. Unauthorized modification could void the user’s authority to operate this product.y ANTENNAS Outdoor antenna grounding (Can differ by country): If an outdoor antenna is installed, follow the precautions below. An outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits as death or serious injury can occur. Be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code (NEC) in the U.S.A. provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes and requirements for the grounding electrode. Antenna grounding according to the National Electrical Code, ANSI/NFPA 70NEC: National Electrical CodeGround ClampAntenna Lead in WireAntenna Discharge Unit(NEC Section 810-20)Grounding Conductor(NEC Section 810-21)Power Service GroundingElectrode System (NEC Art 250, Part H)Electric Service EquipmentGround ClampENGLISH4IMPORTANT SAFETY INSTRUCTIONS
y Cleaning When cleaning, unplug the power cord and wipe gently with a soft cloth to prevent scratching. Do not spray water or other liquids directly on the TV as electric shock may occur. Do not clean with chemicals such as alcohol, thinners or benzine.y Moving Make sure the product is turned off, unplugged and all cables have been removed. It may take 2 or more people to carry larger TVs. Do not press or put stress on the front panel of the TV.y Ventilation Install your TV where there is proper ventilation. Do not install in a confined space such as a bookcase. Do not cover the product with cloth or other materials while plugged. Do not install in excessively dusty places.y If you smell smoke or other odors coming from the TV, unplug the power cord and contact an authorized service center.y Do not press strongly upon the panel with a hand or a sharp object such as a nail, pencil or pen, or make a scratch on it.y Keep the product away from direct sunlight.y Never touch this apparatus or antenna during a thunder or lightning storm.y When mounting a TV on the wall, make sure not to install the TV by hanging the power and signal cables on the back of the TV.y Do not allow an impact shock or any objects to fall into the product, and do not drop anything onto the screen.y Dot Defect The Plasma or LCD panel is a high technology product with resolution of two million to six million pixels. In a very few cases, you could see fine dots on the screen while you’re viewing the TV. Those dots are deactivated pixels and do not affect the performance and reliability of the TV.y Generated Sound“Cracking” noise: A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to temperature and humidity. This noise is common for products where thermal deformation is required. Electrical circuit humming/panel buzzing: A low level noise is generated from a high-speed switching circuit, which supplies a large amount of current to operate a product. It varies depending on the product. This generated sound does not affect the performance and reliability of the product.y Take care not to touch the ventilation openings. When watching the TV for a long period, the ventilation openings may become hot. This does not affect the performance of the product or cause defects in the product.y If the TV feels cold to the touch, there may be a small “flicker” when it is turned on. This is normal, there is nothing wrong with TV. Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots. However, they have no adverse effect on the TV’s performance. Avoid touching the LCD screen or holding your finger(s) against it for long periods of time. Doing so may produce some temporary distortion effects on the screen.ENGLISH5IMPORTANT SAFETY INSTRUCTIONS
DISPOSAL (Hg lamp only used in LCD TVs)The fluorescent lamp used in this product contains a small amount of mercury. Do not dispose of this product with general household waste. Disposal of this product must be carried out in accordance to the regulations of your local authority.Preventing “Image burn” or “Burn-in” on your TV screeny If a fixed image displays on the TV screen for a long period of time, it will be imprinted and become a permanent disfigurement on the screen. This is “image burn” or “burn-in” and not covered by the warranty.y If the aspect ratio of the TV is set to 4:3 for a long period of time, image burn may occur on the letterboxed area of the screen.y Avoid displaying a fixed image on the TV screen for a long period of time (2 or more hours for LCD, 1 or more hours for the Plasma TV) to prevent image burn.For USA and CanadaNOTE TO CABLE/TV INSTALLERThis reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of the cable entry as practical.ENGLISH6IMPORTANT SAFETY INSTRUCTIONS
Viewing 3D Imaging WARNINGViewing Environmenty Viewing Time- When watching 3D contents, take 5 - 15 minute breaks every hour. Viewing 3D contents for a long period of time may cause headache, dizziness, fatigue or eye strain.Those that have a photosensitive seizure or chronic illnessy Some users may experience a seizure or other abnormal symptoms when they are exposed to a flashing light or particular pattern from 3D contents.y Do not watch 3D videos if you feel nausea, are pregnant and/ or have a chronic illness such as epilepsy, cardiac disorder, or blood pressure disease, etc.y 3D Contents are not recommended to those who suffer from stereo blindness or stereo anomaly. Double images or discomfort in viewing may be experienced.y If you have strabismus (cross-eyed), amblyopia (weak eyesight) or astigmatism, you may have trouble sensing depth and easily feel fatigue due to double images. It is advised to take frequent breaks than the average adult.y If your eyesight varies between your right and left eye, revise your eyesight prior to watching 3D contents.Symptoms which require discontinuation or refraining from watching 3D contentsy Do not watch 3D contents when you feel fatigue from lack of sleep, overwork or drinking.y When these symptoms are experienced, stop using/watching 3D contents and get enough rest until the symptom subsides.- Consult your doctor when the symptoms persist. Symptoms may include headache, eyeball pain, dizziness, nausea, palpitation, blurriness, discomfort, double image, visual inconvenience or fatigue.ENGLISH7IMPORTANT SAFETY INSTRUCTIONS
CAUTIONViewing Environmenty Viewing Distance- Maintain a distance of at least twice the screen diagonal length when watching 3D contents. If you feel discomfort in viewing 3D contents, move further away from the TV.Viewing Agey Infants / Children- Usage/ Viewing 3D contents for children under the age of 5 are prohibited.- Children under the age of 10 may overreact and become overly excited because their vision is in development (for example: trying to touch the screen or trying to jump into it. Special monitoring and extra attention is required for children watching 3D contents.- Children have greater binocular disparity of 3D presentations than adults because the distance between the eyes is shorter than one of adults. Therefore they will perceive more stereoscopic depth compared to adults for the same 3D image.y Teenagers- Teenagers under the age of 19 may be stimulated to light coming from 3D videos. Advise them not to watch 3D videos for a long time when they are tired.y Elderly- The elderly may perceive less of a 3D effect than the youth. Do not sit closer to the TV than the recommended distance.Cautions when using the 3D glassesy Make sure to use LG 3D glasses. Otherwise, you may not be able to view 3D videos properly.y Do not use 3D glasses instead of your normal glasses, sunglasses or protective goggles.y Using modified 3D glasses may cause eye strain or image distortion.y Do not keep your 3D glasses in extremely high or low temperatures. It will cause deformation.y The 3D glasses are fragile and are easy to be scratched. Always use a soft, clean piece of cloth when wiping the lenses. Do not scratch the lenses of the 3D glasses with sharp objects or clean/wipe them with chemicals.ENGLISH8IMPORTANT SAFETY INSTRUCTIONS
LICENSESSupported licenses may differ by model. For more information about licenses, visit www.lg.com.Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified® device that plays DivX video. Visit divx.com for more information and software tools to convert your files into DivX video.ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to complete your registration. “DivX Certified® to play DivX® video up to HD 1080p, including premium content.”“DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license.”“Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668; 7,515,710; 7,519,274”Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS, the Symbol & DTS and the Symbol together are registered trademarks & DTS 2.0+Digital Out is a trademark of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved.OPEN SOURCE SOFTWARE NOTICETo obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this product, please visit http://opensource.lge.com.In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping and handling) upon email request to opensource@lge.com. This offer is valid for three (3) years from the date on which you purchased the product.ENGLISH9LICENSES / OPEN SOURCE SOFTWARE NOTICE
2 IMPORTANT SAFETY INSTRUCTIONS7 Viewing 3D Imaging9 LICENSES9 OPEN SOURCE SOFTWARE NOTICE10 TABLE OF CONTENTS11 INSTALLATION PROCEDURE11 ASSEMBLING AND PREPARING11 Unpacking13 Optional Extras14 Parts and buttons16 Lifting and moving the TV17 Setting up the TV17 - Attaching the stand 18 - Mounting on a table19 - Tidying cables20 - Mounting on a wall21 MAKING CONNECTIONS21 Connecting to an antenna or cable22 Connecting to a HD receiver, DVD, or VCR player22 - HDMI Connection23 - DVI to HDMI Connection24 - Component Connection25 - Composite Connection26 Connecting to a PC26 - HDMI Connection, DVI to HDMI Connec-tion or RGB Connection28 Connecting to an Audio System28 - Digital Optical Audio Connection29 Connecting to a USB30 REMOTE CONTROL30 Magic Remote Control Functions31 - Registering Magic Remote Control31 - How to use Magic Remote Control31 - Precautions to Take when Using the Magic Remote Control32 WATCHING TV32 Turning the TV on for the first time33 USING THE USER GUIDE34 SPECIFICATIONS40 MAINTENANCE40 Cleaning Your TV40 - Screen, frame, cabinet and stand40 - Power cord40 TROUBLESHOOTINGTABLE OF CONTENTSy Image shown may differ from your TV.y Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.y The available menus and options may differ from the input source or product model that you are using.y New features may be added to this TV in the future. NOTEENGLISH10 TABLE OF CONTENTS
INSTALLATION PROCEDURE1 Open the package and make sure all the accessories are included.2 Attach the stand to the TV set.3 Connect an external device to the TV set.4 Make sure the network connection is available.You can use the TV network functions only when the network connection is made.ASSEMBLING AND PREPARINGUnpackingCheck your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and item.y Do not use any unapproved items to ensure the safety and product life span.y Any damages or injuries by using unapproved items are not covered by the warranty. y In case of some model, the thin film on screen is a part of TV, So don’t take it off. CAUTIONy The items supplied with your product may vary depending on the model.y Product specifications or contents of this manual may be changed without prior notice due to upgrade of product functions.y For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm (0.39 inches) thick and 18 mm (0.7 inches) width.y Use an extension cable that supports USB 2.0 if the USB cable or USB memory stick does not fit into your TV's USB port.BAAB*A 10 mm (0.39 inches)*B 18 mm (0.7 inches) NOTEENGLISH11ASSEMBLING AND PREPARING
Magic Remote Control, Batteries (AA)(See p.30)Owner’s manual Cable holder (Depending on model)(See p.19)Stand Screws8 EA, M4 x 20(See p.17)Component video cable (See p.24)Composite video cable (See p.24, 25)Cinema 3D GlassesThe number of 3D glasses may differ depending on the model or country.Stand Body (See p.17)Stand Base (See p.17)Polishing cloth(Depending on model)Use this to remove dust from the cabinet.Power Cord (Depending on model)Wall mount inner spacers 4 EA (Depending on model)(See p.20)Desk-mount Screw2 EA (Depending on model)(See p.18)Bracket ScrewM4 x 8, 2 EA (Depending on model)(See p.18)Desk-mount Cable 2 EA(Depending on model)(See p.18)ENGLISH12 ASSEMBLING AND PREPARING
Optional ExtrasOptional extras can be changed or modified for quality improvement without any notification.Contact your dealer for buying these items.These devices only work with certain models.AN-MR300 Magic remote controlAG-F2**, AG-F3**Cinema 3D glassesThe model name or design may be changed manufacturer’s circumstances or policies.ENGLISH13ASSEMBLING AND PREPARING
Parts and buttonsSETTINGSINPUTOKSpeakersScreen1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.ButtonsPower indicatorRemote control and intelligent sensors1Button Description^ v Scrolls through the saved channels.+ - Adjusts the volume level.ܯ OK ٜSelects the highlighted menu option or confirms an input.S SETTINGS Accesses the main menu, or saves your input and exits the menus. INPUT Changes the input source. ( / I) Turns the power on or off.For LM6400/6450/6700/7600 seriesENGLISH14 ASSEMBLING AND PREPARING
SETTINGSINPUTOKSpeakersScreenTouch buttons2Power indicatorRemote control and intelligent sensors1For LM6200/6210/6250 series1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.2 All of the buttons are touch sensitive and can be operated through simple touch with your finger.Touch Button DescriptionScrolls through the saved channels.Adjusts the volume level.OK ٜSelects the highlighted menu option or confirms an input.SETTINGS Accesses the main menu, or saves your input and exits the menus.INPUT Changes the input source. / ITurns the power on or off.ENGLISH15ASSEMBLING AND PREPARING
Lifting and moving the TVWhen moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size.y Avoid touching the screen at all times, as this may result in damage to the screen. CAUTIONy It is recommended to move the TV in the box or packing material that the TV originally came in.y Before moving or lifting the TV, disconnect the power cord and all cables.y When holding the TV, the screen should face away from you to avoid damage.y Hold the top and bottom of the TV frame firmly. Make sure not to hold the transparent part, speaker, or speaker grill area.y When transporting a large TV, there should be at least 2 people.y When transporting the TV by hand, hold the TV as shown in the following illustration.y When transporting the TV, do not expose the TV to jolts or excessive vibration.y When transporting the TV, keep the TV upright, never turn the TV on its side or tilt towards the left or right.ENGLISH16 ASSEMBLING AND PREPARING
Setting up the TVPut your TV on a pedestal stand and mount the TV on a table or wall.Attaching the stand 3245 CAUTIONy When attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches.y Tighten the screws firmly to prevent the TV from tilting forward.1FrontM4 x 204 EAStand BodyStand BaseTop ViewProtection pad (Depending on model)M4 x 204 EAWrapping bag (Depending on model)ENGLISH17ASSEMBLING AND PREPARING
Mounting on a table1 Lift and tilt the TV into its upright position on a table. - Leave a 10 cm (4 inches) (minimum) space from the wall for proper ventilation.10 cm10 cm10 cm10 cm(4 inches)2 Connect the power cord to a wall outlet. CAUTIONy Do not place the TV near or on sources of heat, as this may result in fire or other damage.Adjusting the angle of the TV to suit viewSwivel 10 degrees to the left or right and adjust the angle of the TV to suit your view.10˚10˚ NOTEy When adjusting the angle of the TV, watch out for your fingers.»Personal injury may occur if hands or fingers are pinched. If the product is tilted too much, it may fall, causing damage or injury.Securing the TV to a table(Depending on model)Fix the TV to a table to prevent from tilting forward, damage, and potential injury.1 Connect the Desk-mount Cables to the Stand Base using the Bracket Screws.2 Fix the Desk-mount Cables to a table using the Desk-mount Screws.3 Once the TV is fixed, move the table close to the wall. Children may go in, causing injuries. ÖM4 x 82 EA WARNINGy To prevent TV from falling over, the TV should be securely attached to the floor/wall per installation instructions. Tipping, shaking, or rocking the TV may cause injury.ENGLISH18 ASSEMBLING AND PREPARING
Securing the TV to a wall (optional)1 Insert and tighten the eye-bolts, or TV brackets and bolts on the back of the TV.- If there are bolts inserted at the eye-bolts position, remove the bolts first.2 Mount the wall brackets with the bolts to the wall.Match the location of the wall bracket and the eye-bolts on the rear of the TV.3 Connect the eye-bolts and wall brackets tightly with a sturdy rope.Make sure to keep the rope horizontal with the flat surface. CAUTIONy Make sure that children do not climb on or hang on the TV. NOTEy Use a platform or cabinet that is strong and large enough to support the TV securely.y Brackets, bolts and ropes are optional. You can obtain additional accessories from your local dealer.Tidying cables1 Gather and bind the cables with the cable holder.Cable holder2 Fix the cable management clip firmly to the TV.Cable management clipy Do not move the TV by holding the cable holder and cable management holder, as the cable holders may break, and injuries and damage to the TV may occur. CAUTIONENGLISH19ASSEMBLING AND PREPARING
CAUTIONy Disconnect the power first, and then move or install the TV. Otherwise electric shock may occur.y If you install the TV on a ceiling or slanted wall, it may fall and result in severe injury. Use an authorized LG wall mount and contact the local dealer or qualified personnel.y Do not over tighten the screws as this may cause damage to the TV and void your warranty. y Use the screws and wall mounts that meet the VESA standard. Any damages or injuries by misuse or using an improper accessory are not covered by the warranty. NOTEy Use the screws that are listed on the VESA standard screw specifications. y The wall mount kit includes an installation manual and necessary parts.y The wall mount bracket is optional. You can obtain additional accessories from your local dealer.y The length of screws may differ depending on the wall mount. Make sure to use the proper length.y For more information, refer to the manual supplied with the wall mount.y When attaching a third-party wall mounting bracket to the TV, insert the wall mount inner spacers into the TV wall mount holes to move your TV in vertical angle. Please make sure not to use the spacers for LG wall mounting bracket.Wall Mount Inner SpacerMounting on a wallAttach an optional wall mount bracket at the rear of the TV carefully and install the wall mount bracket on a solid wall perpendicular to the floor. When you attach the TV to other building materials, please contact qualified personnel.LG recommends that wall mounting be performed by a qualified professional installer.10 cm10 cm10 cm10 cm(4 inches)Make sure to use screws and wall mount bracket that meet the VESA standard. Standard dimensions for the wall mount kits are described in the following table.Model 32LM6200 42/47/55LM620047/55LM625047/55LM640060LM645042/47/55LM670047/55LM7600VESA 200 x 200 400 x 400Standard screw M6 M6Number of screws 44Wall mount bracket (optional) LSW200BX LSW400BX LSW220BX LSW420BX ENGLISH20 ASSEMBLING AND PREPARING
Connecting to an antenna or cableConnect an antenna, cable, or cable box to watch TV while referring to the following. The illustrations may differ from the actual items and a RF cable is optional. ANTENNA / CABLEVHF AntennaUHF AntennaAntennaTerminalCoaxial (75Ω)MAKING CONNECTIONSConnect various external devices to the TV and switch input modes to select an external device. For more information on external device’s connection, refer to the manual provided with each device.Available external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices. NOTEy If you record a TV program on a DVD recorder or VCR, make sure to connect the TV signal input cable to the TV through a DVD recorder or VCR. For more information on recording, refer to the manual provided with the connected device.y The external device connection may differ from the model.y Connect external devices to the TV regardless of the order of the TV port.y If you connect a gaming device to the TV, use the cable supplied with the gaming device.y Refer to the external equipment’s manual for operating instructions.y Make sure not to bend the copper wire of the RF cable.Copper wirey Complete all connections between devices, and then connect the power cord to the power outlet to prevent damage to your TV. CAUTIONy Use a signal splitter to use more than 2 TVs.y Visit http://lgknowledgebase.com for more information about the antenna and cable connection. Search for antenna. NOTEENGLISH21MAKING CONNECTIONS
Connecting to a HD receiver, DVD, or VCR playerConnect a HD receiver, DVD, or VCR player to the TV and select an appropriate input mode.HDMI ConnectionHDMI is the best way to connect a device. Transmits the digital video and audio signals from an external device to the TV. Connect the external device and the TV with the HDMI cable as shown in the following illustration. NOTEy Use the latest High Speed HDMI™ Cable with CEC (Customer Electronics Control) function. y High Speed HDMI™ Cables are tested to carry an HD signal up to 1080p and higher.ARC (Audio Return Channel)y When connected with a high-speed HDMI cable, digital audio can be sent to a compactible device without an additional optical audio cable.y ARC is only supported on the HDMI input 1 (ARC) port. An external audio device that supports ARC should be connected to HDMI 1 if you wish to use ARC.HDMI 2 3 1 (ARC) 4 (PC) INDVD/ Blu-Ray / HD Cable Box / HD STBChoose any HDMI input port to connect. It does not matter which port you use.(*Not Provided) NOTEy DTV Audio Supported Codec: MPEG, Dolby Digitaly HDMI Audio Supporeted Format: Dolby Digital, PCM (Up to 192 KHz, 32k/44.1k/48k/88k/96k/176k/192k) -> Not supported DTS.ENGLISH22 MAKING CONNECTIONS
AUDIO OUTDVI OUT4 (PC) IN(RGB/HDMI-PC)AUDIO(RGB/HDMI-PC)AUDIODVI to HDMI ConnectionTransmits the digital video signal from an external device to the TV. Connect the external device and the TV with the DVI-HDMI cable as shown in the following illustration. To transmit an audio signal, connect an audio cable.(*Not Provided)(*Not Provided)DVD/ Blu-Ray / HD Cable BoxENGLISH23MAKING CONNECTIONS
VIDEOAUDIOLRINCOMPONENTAVPRPBYAUDIOVIDEOComponent ConnectionTransmits analog video and audio signals from an external device to the TV. Connect the external device and the TV with a component cable as shown in the following illustration. NOTEy If cables are installed incorrectly, it could cause the image to display in black and white or with distorted color. y Check to ensure each cable is matched with the corresponding color connection.DVD/ Blu-Ray / HD Cable Box(*Not Provided)(*Not Provided)GREENREDBLUEGREENREDBLUEGREENREDBLUEWHITEREDYELLOWWHITEREDWHITERED(Use the composite video cable provided.) (Use the component video cable provided.)GREENYELLOWENGLISH24 MAKING CONNECTIONS
Composite ConnectionTransmits analog video and audio signals from an external device to the TV. Connect the external device and the TV with the composite cable as shown in the following illustration. NOTEy Check to ensure each cable is matched with the corresponding color connection.VIDEOMONO( )AUDIOLRINCOMPONENTAVPRPBYAUDIOVIDEOVCR / DVD/ Blu-Ray / HD Cable Box(*Not Provided)YELLOWWHITEREDYELLOWWHITEREDYELLOWWHITERED(Use the composite video cable provided.)YELLOWENGLISH25MAKING CONNECTIONS
HDMI 2 3 1 (ARC) 4 (PC) INConnecting to a PC NOTEy It is recommended to use the HDMI connection for the best image quality.y Depending on the graphics card, DOS mode video may not work if a HDMI to DVI Cable is in use.y In PC mode, there may be noise associated with the resolution, vertical pattern, contrast or brightness. If noise is present, change the PC output to another resolution, change the refresh rate to another rate or adjust the brightness and contrast on the PICTURE menu until the picture is clear.y The synchronization input form for Horizontal and Vertical frequencies is separate.y Depending on the graphics card, some resolution settings may not allow the image to be positioned on the screen properly.HDMI Connection, DVI to HDMI Connection or RGB ConnectionChoose method A, B, or C to make connection.Method A: HDMI Connection(*Not Provided)SFChoose any HDMI input port to connect. It is recommended to connect the DVI-HDMI to HDMI IN 4.ENGLISH26 MAKING CONNECTIONS
Method B: DVI to HDMI ConnectionMethod C: RGB ConnectionRGB OUT (PC) AUDIO OUT(PC)RGB(RGB/HDMI-PC)AUDIO(PC)RGB(RGB/HDMI-PC)AUDIO(*Not Provided)(*Not Provided)SFAUDIO OUT DVI OUT4 (PC) IN(RGB/HDMI-PC)AUDIO(RGB/HDMI-PC)AUDIO(*Not Provided)SF(*Not Provided)ENGLISH27MAKING CONNECTIONS
Connecting to an Audio SystemYou may use an optional external audio system instead of the built-in speaker. NOTEy If you use an optional external audio device instead of the built-in speaker, set the TV speaker feature to off.Digital Optical Audio ConnectionTransmits a digital audio signal from the TV to an external device. Connect the external device and the TV with the optical audio cable as shown in the following illustration. NOTEy Do not look into the optical output port. Looking at the laser beam may damage your vision.y Audio with ACP (Audio Copy Protection) function may block digital audio output.Digital Audio System(*Not Provided)OPTICAL AUDIO INOUTOPTICALDIGITALAUDIOENGLISH28 MAKING CONNECTIONS
USB Hub USB Apps HDD IN123USB INUSB(*Not Provided)Choose any USB input port to connect. It does not matter which port you use.Connecting to a USBConnect a USB storage device such as a USB flash memory, external hard drive, or a USB memory card reader to the TV and access the Smart Share menu to use various multimedia files. NOTEy To store apps on a USB storage device, make sure that it is connected to the USB IN 3 USB Apps port.y To use a USB Hub device, make sure that it is connected to the USB IN 2 USB port.y Some USB Hubs may not work. If a USB device connected using a USB Hub is not detected, connect it to the USB port on the TV directly.ENGLISH29MAKING CONNECTIONS
REMOTE CONTROLMagic Remote Control FunctionsWhen the message “Magic remote control battery is low. Change the battery.” is displayed, replace the battery. To replace batteries, open the battery cover, replace batteries (1.5 V AA) matching and ends to the label inside the compartment, and close the battery cover. Be sure to point the remote control at the remote control sensor on the TV. To remove the batteries, perform the installation actions in reverse.y Do not mix old and new batteries, as this may damage the remote control. CAUTIONMake sure to point the remote control at the remote control sensor on the TV. (POWER)Turns the TV on or off. HOMEAccesses the Home menu.Navigation buttons (up/down/left/right)Scrolls through menus or options.Pointer (RF transmitter) BACKReturns to the previous level. VOL Adjusts the volume level. CH Scrolls through the saved channels. (MUTE)Mutes all sounds. MY APPSShows the list of Apps. Q.MENU Accesses the quick menu.Used for viewing 3D video. Wheel (OK)Selects menus or options and confirms your input. Scrolls through the saved channels. If you press the navigation button while moving the pointer on the screen, the pointer disappears, and the Magic remote control works as a regular remote control. To display the pointer again, shake the Magic remote control from side to side.ENGLISH30 REMOTE CONTROL
Registering Magic Remote ControlThe Magic Remote Control operates by pairing with your TV. Once you purchased the TV, please register the Magic remote control as follows;How to register the Magic Remote Control(Wheel)To register automatically, turn the TV on and press the Wheel (OK). When registration is completed, the completion message appears on the screen.If registration fails, turn the TV off and back on, then press the Wheel (OK) to complete registration.How to Re-register the Magic Remote ControlBACK HOME1 Press and hold the BACK and HOME buttons together for 5 seconds to reset, then register it by following “How to register the Magic remote control” above.2 To re-register the Magic remote control, press and hold the BACK button for 5 seconds toward the TV.How to use Magic Remote Control1 You can move the pointer by aiming the Pointer Receiver of the remote control at your TV then move it left, right, up or down.»If the pointer does not work properly leave the remote control for 10 seconds then use it again.2 If the pointer disappears, move the remote control slightly to left or right. Then, it will automatically appear on the screen.»If the pointer has not been used for a certain period of time, it will disappear.L1321If you press Wheel (OK) on the Magic remote control, the screen appears. Shows information about the current program and screen.2Pressing this button will display numberkeypad which you can select channel number.3You can select My Apps Menu.Precautions to Take when Using the Magic Remote Controly Use the Magic remote control within the maximum communication distance (10 m, 32.8ft). Using the remote control beyond this distance, or with an object obstructing it, may cause a communication failure.y A communication failure may occur due to nearby devices. Electrical devices such as a microwave oven or wireless LAN product may cause interference, as these use the same bandwidth (2.4 GHz) as the Magic remote control.y The Magic remote control may be damaged or may malfunction if it is dropped or receives a heavy impact.y Take care not to bump into nearby furniture or other people when using the Magic remote control.y Manufacturer and installer cannot provide service related to human safety as the applicable wireless device has possibility of electric wave interference.y It is recommended that an Access Point (AP) be located more than 1 m (3.28 ft) away from the TV. If the AP is installed closer than 1 m (3.28 ft), the Magic remote control may not perform as expected due to frequency interference.ENGLISH31REMOTE CONTROL
y Select Home when prompted. Store mode puts the TV in demo mode.y If you select Store, the any customized settings will switch back to the default settings of Store in 5 minutes. NOTE4 When the basic settings are complete, press (Wheel).y If you do not complete the Initial setting, it will appear whenever the TV turns on.y Disconnect the power cord from the power outlet when you do not use the TV for a long period of time. NOTE5 To turn the TV off, press the power button on the remote control.WATCHING TVTurning the TV on for the first timeWhen you turn the TV on for the first time, the Initial setting screen appears. Select a language and customize the basic settings.1 Connect the power cord to a power outlet.2 In Standby mode, press the power button on the remote control to turn the TV on. The Initial setting screen appears if you turn the TV on for the first time.y You can also access Initial Setting by accessing OPTION in the main menu. NOTE3 Follow the on-screen instructions to customize your TV settings according to your preferences.Language Selection* Selects a language to display.ØUsing the Magic remote controlSets the Magic remote contol.ØEnviroment Selection Select Home* for the home environment.ØTime Zone Setting Selects the time zone and daylight saving. (Depending on country)ØNetwork Connection Sets your network to enable network-related features on the TV.ØAuto Tuning Scans and saves available channels automatically.ØAuto Energy Saving mode SettingSelects Auto Energy Saving mode. (Depending on model)ØSetting is completed. Confirms the setting options.ENGLISH32 WATCHING TV
User Guide allows you to more easily access the detailed TV information.1 Press HOME button to access the HOME menu.2 Select User Guide and press the Wheel (OK).User GuideÖUser GuideCHANNEL SettingPICTURE, SOUND SettingOPTIONLG SMART FunctionAdvabced FunctionInformationTo use input deviceTo use Energy Saving featureTo set time optionsTo set TV lock optionsTo set languageDisabled AssistanceTo set Magic Remote Control12 341Shows the current channel.2Allows to select the category you want.3Allows to select the item you want.You can use / button to move between pages.4Allows to browse the description of the function you want from the index.USING THE USER GUIDETry Now Zoom In CloseUser GuideOPTION > To set languageHOME Ö Settings ¨ OPTION ¨ LanguageSelects Menu Language and Audio Language displayed on the screen.Menu Language Selects a screen menu language.Audio Language[In Digital Mode Only]Selects the desired language when watching digital broadcasting containing several audio languages.Voice Search LanguageSelect the language to make voice search. Only the voice search adopted model can support this setting.CHANNEL SettingPICTURE, SOUND SettingOPTIONLG SMART FunctionAdvabced FunctionInformation12 3Try Now Zoom Out CloseHOME Ö Settings ¨ OPTION ¨ LanguageSelects Menu Language and Audio Language displayed on the screen.Menu Language Selects a screen menu language.Audio Language[In Digital Mode Only]Selects the desired language when watching digital broadcasting containing several audio languages.Voice Search LanguageSelect the language to make voice search. Only the voice search adopted model can support this setting.31Shows the description of the selected menu. You can use / to move between pages.2Moves to the selected menu directly from the User Guide.3Zooms in or out the screen.ENGLISH33USING THE USER GUIDE
SPECIFICATIONSProduct specifications may be changed without prior notice due to upgrade of product functions.Power requirement LM6200, LM6250 series: AC 100 - 240 V ~ 50 / 60 HzThe others: AC 120 V ~ 50 / 60 HzTelevision System NTSC-M, ATSC, 64 & 256 QAMProgram Coverage VHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV 1-135External Antenna Impedance 75 ΩEnvironmentconditionOperating Temperature 0 - 40 °COperating Humidity Less than 80 %Storage Temperature -20 - 60 °CStorage Humidity Less than 85 %MODELS 32LM6200(32LM6200-UE)Dimensions(Width x Height x Depth)With stand 746.0 x 528.0 x 225.0 mm (29.3 x 20.7 x 8.8 inch)Without stand 746.0 x 462.0 x 35.5 mm (29.3 x 18.1 x 1.3 inch)Weight With stand 10.0 kg (22.0 lbs)Without stand 8.5 kg (18.7 lbs)Current Value / Power consumption 0.8 A / 80 WMODELS 42LM6200(42LM6200-UE)47LM6200(47LM6200-UE)47LM6250(47LM6250-UD)Dimensions(Width x Height x Depth)With stand 979.0 x 670.0 x 263.0 mm(38.5 x 26.3 x 10.3 inch)1089.0 x 730.0 x 263.0 mm(42.8 x 28.7 x 10.3 inch)Without stand 979.0 x 594.0 x 35.5 mm(38.5 x 23.3 x 1.3 inch)1089.0 x 655.0 x 35.5 mm(42.8 x 25.7 x 1.3 inch)Weight With stand 15.3 kg (33.7 lbs) 17.8 kg (39.2 lbs)Without stand 13.1 kg (28.8 lbs) 15.6 kg (34.3 lbs)Current Value / Power consumption 1.0 A / 100 W 1.2 A / 120 WENGLISH34 SPECIFICATIONS
MODELS55LM6200(55LM6200-UE)55LM6250(55LM6250-UD)Dimensions(Width x Height x Depth)With stand 1263.0 x 830.0 x 331.0 mm(49.7 x 32.6 x 13.0 inch)Without stand 1263.0 x 754.0 x 35.5 mm(49.7 x 29.6 x 1.3 inch)Weight With stand 25.3 kg (55.7 lbs)Without stand 21.9 kg (48.2 lbs)Current Value / Power consumption 1.5 A / 150 WMODELS 47LM6400(47LM6400-UA)55LM6400(55LM6400-UA)Dimensions(Width x Height x Depth)With stand 1073.0 x 705.0 x 263.0 mm(42.2 x 27.7 x 10.3 inch)1243.2 x 799.5 x 331.0 mm(48.9 x 31.4 x 13.0 inch)Without stand 1073.0 x 639.0 x 35.7 mm(42.2 x 25.1 x 1.4 inch)1243.2 x 735.0 x 35.5 mm(48.9 x 28.9 x 1.3 inch)Weight With stand 16.9 kg (37.2 lbs) 24.7 kg (54.4 lbs)Without stand 14.7 kg (32.4 lbs) 21.0 kg (46.2 lbs)Current Value / Power consumption 1.1 A / 110 W 1.2 A / 120 WMODELS 60LM6450(60LM6450-UA)Dimensions(Width x Height x Depth)With stand 1391.0 x 889.0 x 315.0 mm(54.7 x 35.0 x 12.4 inch)Without stand 1391.0 x 821.0 x 43.2 mm(54.7 x 32.3 x 1.7 inch)Weight With stand 32.0 kg (70.5 lbs)Without stand 28.2 kg (46.9 lbs)Current Value / Power consumption 2.1 A / 210 WENGLISH35SPECIFICATIONS
MODELS 42LM6700(42LM6700-UA)47LM6700(47LM6700-UA)Dimensions(Width x Height x Depth)With stand 953.0 x 636.0 x 263.0 mm(37.5 x 25.0 x 10.3 inch)1063.0 x 701.0 x 263.0 mm(41.8 x 27.5 x 10.3 inch)Without stand 953.0 x 566.0 x 33.4 mm(37.5 x 22.2 x 1.3 inch)1063.0 x 628.0 x 33.4 mm(41.8 x 24.7 x 1.3 inch)Weight With stand 14.8 kg (32.6 lbs) 17.5 kg (38.5 lbs)Without stand 12.6 kg (27.7 lbs) 15.3 kg (33.7 lbs)Current Value / Power consumption 1.0 A / 100 W 1.1 A / 110 WMODELS 55LM6700(55LM6700-UA)Dimensions(Width x Height x Depth)With stand 1232.0 x 795.0 x 331.0 mm(48.5 x 31.2 x 13.0 inch)Without stand 1232.0 x 723.0 x 33.6 mm(48.5 x 28.4 x 1.3 inch)Weight With stand 25.0 kg (55.1 lbs)Without stand 21.3 kg (46.9 lbs)Current Value / Power consumption 1.2 A / 120 WMODELS 47LM7600(47LM7600-UA)55LM7600(55LM7600-UA)Dimensions(Width x Height x Depth)With stand 1063.0 x 701.0 x 263.0 mm(41.8 x 27.5 x 10.3 inch)1232.0 x 795.0 x 331.0 mm(48.5 x 31.2 x 13.0 inch)Without stand 1063.0 x 628.0 x 33.4 mm(41.8 x 24.7 x 1.3 inch)1232.0 x 723.0 x 33.6 mm(48.5 x 28.4 x 1.3 inch)Weight With stand 17.5 kg (38.5 lbs) 25.0 kg (55.1 lbs)Without stand 15.3 kg (33.7 lbs) 21.3 kg (46.9 lbs)Current Value / Power consumption 1.3 A / 130 W 1.6 A / 160 WENGLISH36 SPECIFICATIONS
3D supported modey Video, which is input as below media contents is switched into the 3D screen automatically.y The method for 3D digital broadcast may differ depending on the signal environment. If video is not switched automatically into 3D, manually convert the settings to view 3D images.3D supported mode automaticallyInput Signal Horizontal Frequency (kHz)Vertical Frequency (Hz) Playable 3D video formatHDMI640 X 480 31.469 / 31.559.94 / 60Top & Bottom, Side by Side(Half), Side by Side(Full)62.938 / 63 Frame Packing, Line Alternative480p 31.469 / 31.5 Top & Bottom, Side by Side(Half), Side by Side(Full)62.938 / 63 Frame Packing, Line Alternative720p 44.96 / 45 59.94 / 60 Top & Bottom, Side by Side(Half), Side by Side(Full)89.91 / 90 59.94 / 60 Frame Packing, Line Alternative1080i 33.72 / 33.75 59.94 / 60 Top & Bottom, Side by Side(Half), Side by Side(Full)67.5 59.94 / 60 Frame Packing, Line Alternative1080p26.97 / 27 23.97 / 24Top & Bottom, Side by Side(Half), Side by Side(Full)28.125 2533.72 / 33.75 29.976 / 3043.94 / 54 23.97 / 24Frame Packing, Line Alternative56.25 2567.432 / 67.5 29.976 / 3067.432 / 67.5 59.94 / 60 Top & Bottom, Side by Side(Half)USB 1080p 33.75 30 Side by Side(Half), Top & Bottom, Checker Board, MPO(Photo)DLNA 1080p 33.75 30 Side by Side(Half), Top & Bottom, Checker BoardSignal Playable 3D video formatDTV Frame Compatible Side by Side(Half), Top & BottomENGLISH37SPECIFICATIONS
y For models supporting WiDi, you can set the 3D mode in the same way as in RGB (PC) mode.3D supported mode manuallyInput Signal Horizontal Frequency (kHz) Vertical Frequency (Hz) Playable 3D video formatHDMI-DTV720p 45.00 602D to 3D, Side by Side(Half), Top & Bottom, Single Frame Sequential1080i 33.75 602D to 3D, Side by Side(Half), Top & Bottom1080p27.00 242D to 3D, Side by Side(Half), Top & Bottom, Checker Board28.12 2533.75 3067.50 602D to 3D, Side by Side(Half), Top & Bottom, Checker Board, Single Frame Sequential, Row Interleaving, Column InterleavingHDMI-PC1024x768 48.36 602D to 3D, Side by Side(Half), Top & Bottom1360x768 47.71 1920x1080 67.50 2D to 3D, Side by Side(Half), Top & Bottom, Checker Board, Single Frame Sequential, Row Interleaving, Column InterleavingOthers - -2D to 3DRGB-PC1024x768 48.36 602D to 3D, Side by Side(Half), Top & Bottom1360x768 47.71 1920x1080 67.50 Others - -2D to 3DComponent720p 45.00 602D to 3D, Side by Side(Half), Top & Bottom1080i 33.75 601080p27.00 2428.12 2533.75 3067.50 60Others - -2D to 3DUSB 1080p 33.75 302D to 3D, Side by Side(Half),Top & Bottom, Checker Board, Row Interleaving, Column Interleaving(Photo : Side by Side(Half), Top & Bottom)DLNA 1080p 33.75 30SignalPlayable 3D video formatDTV HD2D to 3D, Side by Side(Half), Top & BottomSD2D to 3DENGLISH38 SPECIFICATIONS
Wireless LAN module(TWFM-B003D) specificationStandard IEEE802.11a/b/g/nFrequency Range2400 to 2483.5 MHz5150 to 5250 MHz5725 to 5850 MHzModulation CCK / OFDM / MIMOOutput Power (Typical)802.11a: 15 dBm802.11b: 14 dBm802.11g: 17 dBm802.11n - 2.4GHz: 17 dBm802.11n - 5GHz: 15 dBmData rate802.11a/g: 54 Mbps802.11b: 11 Mbps802.11n: 300 MbpsAntenna Gain (Typical)2400 to 2483.5 MHz: -2.5 dBi5150 to 5250 MHz: -2.2 dBi5725 to 5850 MHz: -2.9 dBiOccupied bandwidth 802.11a/b/g: HT20802.11n: HT20/40Because band channel used by the country could be different, the user can not change or adjust theoperating frequency and this product is set for the regional frequency table.y FCC ID of Wi-Fi module inside TV FCC ID: BEJTWFM-B003DBluetooth module (BM-LDS302) specificationStandard Bluetooth Version 3.0Frequency Range 2400 ~ 2483.5 MHzOutput Power (Max.) 10 dBm or lowerData rate (Max.) 3 MbpsCommunication DistanceLine of Open Sight approx. 10 my FCC ID of Bluetooth module inside TV FCC ID: BEJLDS302HDMI/DVI-DTV supported modeResolution Horizontal Frequency (kHz)Vertical Frequency (Hz)720X480 31.46931.559.94601280X720 44.96 4559.94601920X108033.7233.7526.972733.71633.7567.4367.559.946023.972429.97630.0059.9460Component port connecting informationComponent ports on theTV YPBPRVideo output portson DVD playerYPBPRY B-Y R-YYCbCrYPbPrSignal Component480i O480p O720p/1080i O1080p O(60 Hz only)ENGLISH39SPECIFICATIONS
MAINTENANCECleaning Your TVClean your TV regularly to keep the best performance and to extend the product lifespan.y Make sure to turn the power off and disconnect the power cord and all other cables first.y When the TV is left unattended or unused for a long time, disconnect the power cord from the wall outlet to prevent possible damage from lightning or power surges. CAUTIONScreen, frame, cabinet and standTo remove dust or light dirt, wipe the surface with a dry, clean, and soft cloth. To remove major dirt, wipe the surface with a soft cloth dampened in clean water or a diluted mild detergent. Then wipe immediately with a dry cloth.y Do not push, rub, or hit the surface with your fingernail or a sharp object, as this may result in scratches on the screen and image distortions.y Do not use any chemicals, such as waxes, benzene, alcohol, thinners, insecticides, air fresheners, lubricants, as these may damage the screen’s finish and cause discoloration.y Do not spray liquid onto the surface. If water enters the TV, it may result in fire, electric shock, or malfunction. CAUTIONPower cordRemove the accumulated dust or dirt on the power cord regularly.TROUBLESHOOTINGProblem SolutionCannot control the TV with the remote control.y Check the remote control sensor on the product and try again.y Check if there is any obstacle between the product and the remote control.y Check if the batteries are still working and properly installed ( to , to ).No image display and no sound is produced.y Check if the product is turned on.y Check if the power cord is connected to a wall outlet.y Check if there is a problem in the wall outlet by connecting other products.The TV turns off suddenly. y Check the power control settings. The power supply may be interrupted.y Check if the Auto sleep feature is activated in the Time settings. y If there is no signal while the TV is on, the TV will turn off automatically after 15 minutes of inactivity.ENGLISH40 MAINTENANCE & TROUBLESHOOTING
CHILD SAFETY: It Makes A Difference How and Where You Use Your Flat Panel DisplayCongratulations on your purchase! As you enjoy your new product, please keep these safety tips in mind:THE ISSUE yThe home theater entertainment experience is a growing trend and larger flat panel displays are popular purchases. However, flat panel displays are not always supported on the proper stands or installed according to the manufacturer’s recommendations. yFlat panel displays that are inappropriately situated on dressers, bookcases, shelves, desks, speakers, chests or carts may fall over and cause injury.THIS MANUFACURER CARES! yThe consumer electronics industry is committed to making home entertainment enjoyable and safe.TUNE INTO SAFETY yOne size does NOT fit all. Follow the manufacturer’s recommendations for the safe installation and use of your flat panel display. yCarefully read and understand all enclosed instructions for proper use of this product. yDon’t allow children to climb on or play with furniture and television sets. yDon’t allow place flat panel displays on furniture that can easily be used as steps, such as a chest of drawers. yRemember that children can become excited while watching a program, especially on a “larger than life” flat panel display. Care should be taken to place or install the display where it cannot be pushed, pulled over, or knocked down. yCare should be taken to route all cords and cables connected to the flat panel display so that they cannot be pulled or grabbed by curious children.WALL MOUNTING: IF YOU DECIDE TO WALL MOUNT YOUR FLAT PANEL DISPLAY, ALWAYS: yUse a mount that has been recommended by the display manufacturer and/or listed by an independent laboratory (such as UL, CSA, ETL). yFollow all instructions supplied by the display and wall mount manufacturers. yIf you have any doubts about your ability to safely install your flat panel display, contact your retailer about professional installation. yMake sure that the wall where you are mounting the display is appropriate. Some wall mounts are not designed to be mounted to walls with steel studs or old cinder block construction. If you are unsure, contact a professional installer. yA minimum of two people are required for installation. Flat panel displays can be heavy
LG Customer Information CenterFor inquires or comments, visit www.lg.com or call;1-800-243-0000 USA, Consumer User1-888-865-3026 USA, Commercial User1-888-542-2623 CANADARegister your product Online!www.lg.comThe model and serial number of the TV is located on the back and one side of the TV. Record it below should you ever need service.MODEL SERIAL (For LM6200/LM6400/LM6700/LM7600 series)This product qualifies for ENERGY STAR in the “factory default (Home Use)” setting.Changing the factory default settings or enabling other features may increase power consumption that could exceed the limits necessary to quality for ENERGY STAR.
Regulatory Information cont. FCC Compliance StatementThis equipment has been tested and found to complywithin the limits of a Class B digital device pursuant to Part15 of the FCC Rules. These limits are designed to providereasonable protection against harmful interference in aresidential installation.This equipment generates, uses, and can radiate radiofrequency energy and if not installed and used inaccordance with the instructions, may cause harmfulinterference to radio communications. However, there isno guarantee that interference will not occur in a particularinstallation.If this equipment does cause harmful interference to radioor television reception (which can be determined byturning the equipment on and off), the user is encouragedto try to correct the interference by using one or more ofthe following measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and the receiver.Connect the equipment into an outlet on a circuitdifferent from that to which the receiver is connected.Consult the dealer or an experienced radio/TVtechnician for help.Caution: Changes or modifications not expressly approvedby the party responsible for compliance could void theuser's (or your) authority to operate the equipment. Onlyperipherals (digital input/output devices, terminals, printers,etc.) certified to comply with the Class B limits may beattached to this monitor. Operation with non-certifiedperipherals is likely to result in interference to radio and TV reception. Only shielded signal cables may be used withthis System.Canadian DOC NoticeThis Class B digital apparatus meets all requirements ofthe Canadian Interference-Causing Equipment Regulations. Cet appareil numérique de la classe Brespecte toutes les exigences du Règlement sur lematériel brouilleur du Canada.CE Conformity Notice (for Europe)Products with the “CE” Marking comply with the EMCDirective(89/336/EEC) and LOW VOLTAGE Directive(73/23/EEC) issued by the Commission of the EuropeanCommunity.Compiance with these directives implies conformity to thefollowing European Norms :• EN 55022 ; Radio Frequency Interference• EN 55024 ; Electromagnetic Immunity• EN 61000-3-2 ; Power Line Harmonics• EN 61000-3-3 ; Voltage Fluctuations• EN 60950-1 ; Product SafetyLow Radiation Compliance (MPR II)This monitor meets one of the strictest guidelines availabletoday for low radiation emissions, offering the user extrashielding and an antistatic screen coating. Theseguidelines, set forth by a government agency in Sweden,limit the amount of emission allowed in the Extremely LowFrequency (ELF) and Very Low Frequency (VLF)electromagnetic range.01NOTICEThe regulations are applied only to the products with theID LABEL indicating specific requirements.NOTICEThe regulations are applied only to the products with theID LABEL indicating specific requirements.NOTICEThe regulations are applied only to the products with theID LABEL indicating specific requirements.TCO'99 (TCO'99 applied model only)Congratulations!You have just purchased a TCO’99 approved and labelledproduct! Your choice has provided you with a productdeveloped for professional use. Your purchase has alsocontributed to reducing the burden on the environment andalso to the further development of environmentallyadapted electronics products.
Regulatory Information cont. 02Why do we have environmentally labelled computers?In many countries, environmental labelling has become anestablished method for encouraging the adaptation ofgoods and services to the environment. With the growingmanufacture and usage of electronic equipmentthroughout the world, there is a recognized concern for thematerials and substances used by electronic productswith regards to their eventual recycling and disposal. Byproper selection of these materials and substances, theimpact on the environment can be minimized.There are also other characteristics of a computer, such asenergy consumption levels, that are important from theviewpoints of both the work (internal) and natural (external)environments. Electronic equipment in offices is often leftrunning continuously, resulting in unnecessaryconsumption of large amounts of energy and additionalpower generation. From the standpoint of carbon dioxideemissions alone, it is vital to save energy.What does labelling involve?The product meets the requirements for the TCO’99scheme which provides for international and environmentallabelling of personal computers and/or displays. The labelling scheme was developed as a joint effort by the TCO (The Swedish Confederation of ProfessionalEmployees), Svenska Naturskyddsforeningen (The Swedish Society for Nature Conservation) andStatens Energimyndighet (The Swedish NationalEnergy Administration).Approval requirements cover a wide range of issues:ecology, ergonomics, emission of electrical and magneticalfields, energy consumption and electrical safety. Ecological criteria impose restrictions on the presence anduse of heavy metals, brominated and chlorinated flameretardants, and other substances. The product must beprepared for recycling and the manufacturing site(s) shallbe certified according to ISO14001 or EMAS registered.Energy requirements include a demand that the systemunit and/or display, after a certain period of inactivity,shall reduce its power consumption to a lower level in oneor more stages. The length of time to reactivate the systemunit shall be reasonable for the user.Labelled products must meet strict environmentaldemands, for example, in respect of the reduction ofelectrical and magnetical fields as well as work load andvisual ergonomics.Below you will find a brief summary of the ecologicalrequirements met by this product. The completeecological criteria document can be found at TCODevelopment’s website http://www.tcodevelopment.comor may be ordered from:TCO DevelopmentSE-114 94 STOCKHOLM, SwedenFax: +46 8 782 92 07Email : development@tco.seInformation regarding TCO’99 approved and labelledproducts may also be obtained athttp://www.tcodevelopment.comEcological requirementsFlame retardantsFlame retardants may be present in printed wiring boardlaminates, cables, and housings. Their purpose is toprevent, or at least to delay the spread of fire. Up to 30%by weight of the plastic in a computer casing can consist offlame retardant substances. Many flame retardantscontain bromine or chlorine, and these flame retardantsare chemically related to PCBs (polychlorinatedbiphenyls). Both the flame retardants containing bromineor chlorine and the PCBs are suspected of giving rise tohealth effects, including reproductive damage in fish-eating birds and mammals, due to the bio-accumulative*processes when not disposed of in accordance with strictstandards for disposal.TCO’99 requires that plastic components weighing morethan 25 grams shall not contain flame retardants withorganically bound bromine or chlorine. Flame retardantsare allowed in the printed wiring board laminates due tothe lack of commercially available alternatives.Cadmium**Cadmium is present in rechargeable batteries and in thecolour-generating layers of certain computer displays.TCO’99 requires that batteries, the colour-generatinglayers of display screens, and the electrical or electronicscomponents shall not contain any cadmium.Mercury**Mercury is sometimes found in batteries, relays andswitches. TCO’99 requires that batteries shall not containany mercury. It also demands that mercury is not presentin any of the electrical or electronics componentsassociated with the labelled unit. There is however one
Regulatory Information cont. 03exception. Mercury is, for the time being, permitted in theback light system of flat panel monitors as there today isno commercially available alternative. TCO aims onremoving this exception when a mercury free alternative isavailable.Lead**Lead can be found in picture tubes, display screens,solders and capacitors. TCO’99 permits the use of leaddue to the lack of commercially available alternatives, butin future requirements TCO Development aims atrestricting the use of lead._____________________________________________* Bio-accumulative is defined as substances which accumulate in living organisms.**Lead, Cadmium and Mercury are heavy metals which are bio-accumulative.TCO’03(TCO’03 applied model only)Congratulations!The display you have just purchased carries the TCO’03Displays label. This means that your display is designed,manufacturedand tested according to some of the strictest quality andenvironmental requirements in the world. This makes for ahigh performance product, designed with the user in focusthat also minimizes the impact on our natural environment.Some of the features of the TCO’03 Display requirements:Ergonomics• Good visual ergonomics and image quality in order toimprove the working environment for the user and toreduce sight and strain problems. Importantparameters are luminance, contrast, resolution,reflectance, colour rendition and image stability.Energy• Energy-saving mode after a certain time – beneficialboth for the user and the environment• Electrical safetyEmissions• Electromagnetic fields• Noise emissionsEcology• The product must be prepared for recycling and themanufacturer must have a certified environmentalmanagement system such as EMAS or ISO 14 001• Restrictions onchlorinated and brominated flame retardants andpolymersheavy metals such as cadmium, mercury and lead.The requirements included in this label have beendeveloped by TCO Development in co-operation withscientists, experts, users as well as manufacturers all overthe world. Since the end of the 1980s TCO has beeninvolved in influencing the development of IT equipment ina more user-friendly direction. Our labelling system startedwith displays in 1992 and is now requested by users andIT-manufacturers all over the world.For more information, please visitwww.tcodevelopment.comInformation for Environmental PreservationLGE. announced the 'LG Declaration for a CleanerEnvironment' in 1994, and this ideal has served as aguiding managerial principle ever since. The Declaration isa foundation that has allowed us to undertakeenvironmentally friendly activities in careful considerationof economic, environmental, and social aspects.We promote activities for environmental preservation, andwe specifically develop our products to embrace theconcept of environment-friendly. We minimize the hazardous materials contained in ourproducts. For example, there is no cadmium to be found inour monitors.Information for recyclingThis monitor may contain parts which could be hazardousto the environment. It is important that this monitor berecycled after use.LGE. handles all waste monitors through anenvironmentally acceptable recycling method. There areseveral take-back and recycling systems currently inEnglish
Regulatory Information cont. 04operation worldwide. Many parts will be reused andrecycled, while harmful substances and heavy metals aretreated by an environmentally friendly method.If you want to find out more information about ourrecycling program, please contact your local LG vendor ora corporate representative of LG. We set our vision and policies on a cleaner world byselecting the issue of the global environment as a task forcorporate improvement. Please visit our website for moreinformation about our ‘green’ policies.http://www.lge.com/about/environment/html/Recycling.jspInformationen zur Erhaltung der UmweltIm Jahr 1994 verkündete LGE die 'LG Declaration for aCleaner Environment' (LG Erklärung für eine sauberereUmwelt). Seitdem dient dieses Ideal als führendes Prinzipdes Unternehmens. Diese Erklärung war die Basis für dieDurchführung von umweltfreundlichen Aktivitäten, wobei wirtschaftliche,umweltbezogene und soziale Aspekte in die Überlegungen mit einbezogen wurden.Wir fördern Aktivitäten zum Schutz der Umwelt und dieEntwicklung unserer Produkte ist darauf ausgerichtet,unserem Konzept bezüglich Umweltfreundlichkeit gerechtzu werden. Wir sind darauf bedacht, den Anteil der in unserenProdukten enthaltenen schädlichen Materialien zuminimieren. So ist in unseren Monitoren beispielsweisekein Kadmium zu finden.Informationen zum Thema RecyclingDieser Monitor enthält Teile, die umweltschädlich seinkönnen. Es ist unbedingt erforderlich, dass der Monitorrecycelt wird, nachdem er außer Dienst gestellt wurde.Bei LGE. werden alle ausrangierten Monitore in einemunter umweltbezogenen Aspekten geeigneten Verfahrenrecycelt. Augenblicklich sind weltweit mehrereRücknahme- und Recyclingsysteme im Einsatz. VieleTeile werden wieder verwendet und recycelt. SchädlicheSubstanzen und Schwermetalle werden durchumweltverträgliche Verfahren behandelt.Falls Sie mehr über unser Recyclingprogramm erfahrenmöchten, wenden Sie sich bitte an Ihren lokalen LG-Händler oder einen Unternehmensvertreter von LG. Wir richten unsere Firmenpolitik auf eine sauberereUmwelt hin aus, indem wir umweltspezifische Aspekte alswichtigen Punkt in die Weiterentwicklung unseresUnternehmens einfließen lassen. ZusätzlicheInformationen über unsere ‘grüne’ Firmenpolitik erhaltenSie auf unserer Website.http://www.lge.com/about/environment/html/Recycling.jspInformation sur la protection del’environnementLGE. a publié sa 'Déclaration en faveur d’unenvironnement plus propre' en 1994 et celle-ci est restée,depuis lors, un principe directeur de notre entreprise.Cette déclaration a servi de base à notre réflexion et nousa permis de prendre en compte à la fois les aspectséconomiques et sociaux de nos activités, tout enrespectant l’environnement.Nous encourageons les activités en faveur de lapréservation de l’environnement et c’est dans cet esprit que nous développons nos produits : nous réduisons auminimum les matières dangereuses qui entrent dans leurcomposition et l’on ne trouve pas de cadmium, parexemple, dans nos moniteurs.Information sur le recyclageCe moniteur peut contenir des composants qui présententun risque pour l’environnement. Il est donc important quecelui-ci soit recyclé après usage.LGE. traite les moniteurs en fin de cycle conformément àune méthode de recyclage respectueuse del’environnement. Nous reprenons nos produits et lesrecyclons dans plusieurs sites répartis dans le mondeentier. De nombreux composants sont réutilisés etrecyclés, et les matières dangereuses, ainsi que lesmétaux lourds, sont traités selon un procédé écologique.Si vous souhaitez plus de renseignements sur notreprogramme de recyclage, veuillez contacter votrerevendeur LG ou un l’un de nos représentants. Nous voulons agir pour un monde plus propre et croyonsau rôle de notre entreprise dans l’amélioration del’environnement. Pour plus de renseignements sur notrepolitique “verte”, rendez visite à notre site :http://www.lge.com/about/environment/html/Recycling.jspDeutschFrançais
05Regulatory Information cont. Informazioni per la tutela dell’ambienteLa LGE. ha annunciato nel 1994 la cosiddetta 'LGDeclaration for a Cleaner Environment' (Dichiarazione diLG a favore di un ambiente più pulito), un ideale che daallora funge da principio ispiratore della gestioneaziendale. La dichiarazione rappresenta il fondamento checonsente di intraprendere attività a favore dell'ambientetenendo conto degli aspetti economici, ambientali esociali.Noi della LG, promuoviamo attività a favore dellatutela dell'ambiente sviluppando appositamente i nostriprodotti per cogliere il concetto del rispetto dell’ambienteriducendo i materiali dannosi presenti nei nostri prodotti.Ad esempio nei nostri monitor non è presente il cadmio.Informazioni per il riciclaggioIl monitor può presentare componenti che potrebberorisultare eventualmente dannosi per l'ambiente. Èimportante che il monitor sia riciclato al termine del suoutilizzo.La LGE. gestisce tutti i monitor di rifiuto con un metodo diriciclaggio soddisfacente dal punto di vista ambientale. Intutto il mondo sono attualmente in funzione numerosisistemi di riciclaggio e recupero. I diversi componenti sonoriutilizzati e riciclati, mentre le sostanze dannose e i metallipesanti vengono trattati con un metodo rispettosodell’ambiente.Se si desiderano maggiori informazioni in merito alprogramma di riciclaggio, è consigliabile rivolgersi alproprio rivenditore LG o ad un rappresentante aziendaledella LG. Noi della LG impostiamo la nostra visione e le nostrepolitiche a favore di un mondo più pulito ponendo laquestione dell'ambiente dal punto di vista globale comeuna mansione rivolta al miglioramento della nostraazienda. Vi invitiamo a visitare il nostro sito internet perulteriori informazioni sulla nostra politica “verde”.http://www.lge.com/about/environment/html/Recycling.jspInformación para la conservación medioambientalLGE. presentó la 'Declaración para un entorno más limpiode LG' en 1994 y este ideal ha servido para guiar nuestrosprincipios empresariales desde entonces. La Declaraciónes la base que nos ha permitido llevar a cabo tareas querespetan el medio ambiente siempre teniendo en cuentaaspectos sociales, económicos y medioambientales.Promocionamos actividades orientadas a la conservacióndel medio ambiente y desarrollamos nuestros productosespecíficamente para que se ajusten a la filosofía queprotege el entorno. Reducimos al máximo el uso de materiales de riesgo ennuestros productos. Un ejemplo de ello es la ausenciatotal de cadmio en nuestros monitores.Información para el reciclajeEste monitor puede contener piezas que entrañen riesgosmedioambientales. Es importante reciclar este monitordespués de su utilización.LGE. trata todos los monitores usados siguiendo unmétodo de reciclaje que no daña al entorno. Contamoscon diversos sistemas de recuperación y reciclaje quefuncionan a nivel mundial en la actualidad. Es posiblereciclar y reutilizar muchas de las piezas, mientras que lassustancias dañinas y los metales pesados se tratansiguiendo un método que no perjudique al medioambiente. Si desea obtener más información acerca delprograma de reciclaje, póngase en contacto con suproveedor local de LG o con un representante empresarialde nuestra marca. Basamos nuestra visión y nuestras políticas en un mundomás limpio y para ellos optamos por un entorno globalcomo tarea principal de nuestra evolución como empresa.Visite nuestra página Web para obtener más informaciónsobre nuestras políticas ecológicas.http://www.lge.com/about/environment/html/Recycling.jspInformações relacionadas à preservaçãoambientalA LGE. anunciou a 'LG Declaration for a CleanerEnvironment' (Declaração da LG para um ambiente maislimpo) em 1994 e esse ideal tem servido desde entãocomo um princípio administrativo de orientação. ADeclaração é a base que nos tem permitido realizaratividades favoráveis ao ambiente com consideraçãoatenta aos aspectos econômicos, ambientais e sociais.Promovemos atividades de preservação ambiental edesenvolvemos nossos produtos para englobarItalianoEspanõlPortuguês
06Regulatory Information cont. especificamente o conceito de favorável ao ambiente. Reduzimos os materiais perigosos contidos em nossosprodutos. Por exemplo, não há cádmio em nossosmonitores.Informações relacionadas à reciclagemEste monitor pode conter peças que podem representarriscos ao ambiente. É importante que ele seja recicladoapós o uso.A LGE. cuida de todos os monitores descartados atravésde um método de reciclagem agradável ao ambiente. Hávários sistemas de devolução e reciclagem atualmenteem operação no mundo. Muitas peças serão reutilizadase recicladas e as substâncias nocivas e os metaispesados passarão por tratamento através de um métodofavorável ao ambiente.Para obter mais informações sobre nosso programa dereciclagem, entre em contato com seu fornecedor LGlocal ou com um representante corporativo da LG. Definimos nossa visão e nossas políticas relacionadas aum mundo mais limpo selecionando a questão doambiente global como uma tarefa de aprimoramentocorporativo. Visite nosso site para obter mais informaçõessobre nossas políticas de meio ambiente.http://www.lge.com/about/environment/html/Recycling.jspInformatie met betrekking tot het behoud vanhet milieuLGE. publiceerde in 1994 de 'LG Declaration for a CleanerEnvironment' (de LG-verklaring met betrekking tot eenschoner milieu). Deze verklaring en het ideaal van eenschoner milieu fungeren sindsdien als een bestuurlijkeleidraad voor onze onderneming. Op basis van dezeverklaring ontplooien wij milieuvriendelijke activiteiten,waarbij er zowel met sociale en economische aspecten,als met milieuaspecten zorgvuldig rekening wordtgehouden.Wij ondersteunen activiteiten die zijn gericht op hetbehoud van het milieu en wij houden bij het ontwikkelenonze producten specifiek rekening met de milieuvriendelijkheid van onze producten. Wij minimaliseren het gebruik van schadelijke stoffen inonze producten. Er wordt bijvoorbeeld geen cadmiumverwerkt in onze monitors.NederlandsInformatie met betrekking tot recyclingDeze monitor bevat materialen die schadelijk zoudenkunnen zijn voor het milieu. Het is belangrijk dat dezemonitor aan het einde van zijn levensduur wordtgerecycled.LGE. verwerkt alle afvalmonitors via een milieuvriendelijkerecyclingmethode. Hiervoor worden er momenteelwereldwijd verscheidene inname- en recyclingsystemengehanteerd. Een groot aantal onderdelen wordt opnieuwgebruikt en gerecycled, waarbij schadelijke stoffen enzware metalen volgens een milieuvriendelijke methodeworden verwerkt.Voor meer informatie over ons recyclingprogramma kunt ucontact opnemen met uw plaatselijke LG-vertegenwoordiger of een LG-vestiging. Onze visie en ons beleid met betrekking tot een schonerewereld vloeien voort uit het feit dat wij het milieu hebbenaangemerkt als een onderwerp dat speciale aandachtverdient binnen onze onderneming. Bezoek onze websitevoor meer informatie over ons 'groene' beleid.http://www.lge.com/about/environment/html/Recycling.jsp»ÌÙÓχˆËˇ ÔÓ Óı‡Ì ÓÍÛʇ˛˘ÂÈ Ò‰˚¬ 1994 „Ó‰Û ÍÓÔÓ‡ˆËˇ LGE ÓÔÛ·ÎËÍÓ‚‡Î‡'ƒÂÍ·‡ˆË˛ LG ÔÓ Óı‡Ì ÓÍÛʇ˛˘ÂÈ Ò‰˚',ÍÓÚÓ‡ˇ Ò ÚÂı ÔÓ ÒÎÛÊËÚ ÓÒÌÓ‚Ì˚Ï ÔË̈ËÔÓÏÛÔ‡‚ÎÂÌˡ. Õ‡ ÓÒÌÓ‚Â ˝ÚÓÈ ‰ÂÍ·‡ˆËË Ï˚ ÒÏÓ„ÎËÔ‰ÔËÌˇÚ¸ ‰ÂÈÒڂˡ, Ó·ÂÒÔ˜˂‡˛˘Ë ·ÂÁÓÔ‡ÒÌÓÒÚ¸ ÓÍÛʇ˛˘ÂÈ Ò‰˚, Û‰ÂΡˇ ÔË ˝ÚÓωÓÎÊÌÓ ‚ÌËχÌË ˝ÍÓÌÓÏ˘ÂÒÍËÏ, ˝ÍÓÎӄ˘ÂÒÍËÏ ËÒӈˇθÌ˚Ï ‡ÒÔÂÍÚ‡Ï.Ã˚ ÒÚËÏÛÎËÛÂÏ ‰ÂˇÚÂθÌÓÒÚ¸ ÔÓ Óı‡ÌÂÓÍÛʇ˛˘ÂÈ Ò‰˚, Û‰ÂΡˇ ÓÒÓ·Ó ‚ÌËχÌËÂ‡Á‡·ÓÚÍ ̇¯ÂÈ ÔÓ‰Û͈ËË ‚ ÒÓÓÚ‚ÂÚÒÚ‚ËË ÒÍÓ̈ÂÔˆËÂÈ ˝ÍÓÎӄ˘ÂÒÍÓÈ ·ÂÁÓÔ‡ÒÌÓÒÚË. Ã˚ Ò‚Ó‰ËÏ Í ÏËÌËÏÛÏÛ ÒÓ‰ÂʇÌË ÓÔ‡ÒÌ˚ı‚¢ÂÒÚ‚ ‚ ̇¯ÂÈ ÔÓ‰Û͈ËË. Õ‡ÔËÏÂ, ‚ ̇¯ËıÏÓÌËÚÓ‡ı ‚˚ Ì ̇ȉÂÚ ͇‰Ïˡ.»ÌÙÓχˆËˇ ÔÓ ÛÚËÎËÁ‡ˆËË ÓÚıÓ‰Ó‚›ÚÓÚ ÏÓÌËÚÓ ÏÓÊÂÚ ÒÓ‰Âʇڸ ÍÓÏÔÓÌÂÌÚ˚,ÍÓÚÓ˚ ÏÓ„ÛÚ Ì‡ÌÂÒÚË Û˘Â· ÓÍÛʇ˛˘ÂÈ Ò‰Â.Russian
07Regulatory Information cont. EPA(EPA applied model only)ENERGY STARis a set of power-saving guidelinesissued by the U.S. Environmental ProtectionAgency(EPA).NOM MARK (Mexico only)ÕÂÓ·ıÓ‰ËÏÓ ÛÚËÎËÁËÓ‚‡Ú¸ ÏÓÌËÚÓ ÔÓÒÎÂËÒÔÓθÁÓ‚‡Ìˡ.KÓÔÓ‡ˆËˇ LGE ÔÂÂ‡·‡Ú˚‚‡ÂÚ ‚Ò ·‡ÍÓ‚‡ÌÌ˚ÂÏÓÌËÚÓ˚ Ò ÔÓÏÓ˘¸˛ ˝ÍÓÎӄ˘ÂÒÍË ÔËÂÏÎÂÏÓ„ÓÏÂÚÓ‰‡ ÛÚËÎËÁ‡ˆËË ÓÚıÓ‰Ó‚. œÓ ‚ÒÂÏÛ ÏËÛ‰ÂÈÒÚ‚Û˛Ú ÒËÒÚÂÏ˚ ÛÚËÎËÁ‡ˆËË ÓÚıÓ‰Ó‚ Ë ‚ÓÁ‚‡Ú‡ËÒÔÓθÁÓ‚‡ÌÌÓÈ ÔÓ‰Û͈ËË. ÃÌÓ„Ë ÍÓÏÔÓÌÂÌÚ˚·Û‰ÛÚ ‚ÚÓ˘ÌÓ ËÒÔÓθÁÓ‚‡Ì˚ Ë ÛÚËÎËÁËÓ‚‡Ì˚, ‚ ÚÓ‚ÂÏˇ Í‡Í ‚‰Ì˚ ‚¢ÂÒÚ‚‡ Ë ÚˇÊÂÎ˚ ÏÂÚ‡ÎÎ˚·Û‰ÛÚ Ó·‡·ÓÚ‡Ì˚ Ò ÔÓÏÓ˘¸˛ ˝ÍÓÎӄ˘ÂÒÍËÔËÂÏÎÂÏÓ„Ó ÏÂÚÓ‰‡.«‡ ·ÓΠÔÓ‰Ó·ÌÓÈ ËÌÙÓχˆËÂÈ ÔÓ Ì‡¯ÂÈÔÓ„‡ÏÏ ÛÚËÎËÁ‡ˆËË ÓÚıÓ‰Ó‚ Ó·‡˘‡ÈÚÂÒ¸ ÍÏÂÒÚÌÓÏÛ ÔÓÒÚ‡‚˘ËÍÛ ËÎË Ô‰ÒÚ‡‚ËÚÂβ ÍÓÔÓ‡ˆËË LG. Ã˚ ÓËÂÌÚËÛÂÏÒˇ ̇ Ó·ÂÒÔ˜ÂÌË ˝ÍÓÎӄ˘ÂÒÍÓÈ·ÂÁÓÔ‡ÒÌÓÒÚË, ÒÚ‡‚ˇ Ò· ˆÂθ˛ „ÎÓ·‡Î¸ÌÛ˛ Á‡˘ËÚÛÓÍÛʇ˛˘ÂÈ Ò‰˚. ƒÓÔÓÎÌËÚÂθÌÛ˛ ËÌÙÓχˆË˛Ó ̇¯ÂÈ ÔÓÎËÚËÍ ÔÓ Óı‡Ì ÓÍÛʇ˛˘ÂÈ Ò‰˚ ‚˚ÏÓÊÂÚ ̇ÈÚË Ì‡ ̇¯ÂÏ Ò‡ÈÚÂ:http://www.lge.com/about/environment/html/Recycling.jspAs an ENERGY STAR Partner LGE U. S.A.,Inc. has determined that this productmeets the ENERGY STAR guidelines forenergy efficiency.
08Regulatory Information cont. 1.When this crossed-out wheeled bin symbol is attachedto a product it means the product is covered by theEuropean Directive 2002/96/EC. 2.All electrical and electronic products should bedisposed of separately from the municipal wastestream via designated collection facilities appointed bythe government or the local authorities. 3.The correct disposal of your old appliance will helpprevent potential negative consequences for theenvironment and human health.4.For more detailed information about disposal of yourold appliance, please contact your city office, wastedisposal service or the shop where you purchased theproduct.Disposal of your old appliance1.Quando su un prodotto è riportato il simbolo di1.När den här symbolen med en överkryssadsoptunna på hjul sitter på en produkt innebär detatt den regleras av European Directive2002/96/EC.2.Alla elektriska och elektroniska produkter börkasseras via andra vägar än de som finns förhushållsavfall, helst via för ändamålet avseddauppsamlingsanläggningar som myndigheternautser.3.Om du kasserar din gamla apparat på rätt sättså bidrar du till att förhindra negativakonsekvenser för miljön och människors hälsa.4.Mer detaljerad information om kassering av dingamla apparat kan får av kommunen,renhållningsverket eller den butik där du köpteprodukten.1.Als het symbool met de doorgekruiste verrijdbareafvalbak op een product staat, betekent dit dathet product valt onder de Europese Richtlijn2002/96/EC.2.Elektrische en elektronische producten mogenniet worden meegegeven met het huishoudelijkafval, maar moeten worden ingeleverd bijspeciale inzamelingspunten die door de lokale oflandelijke overheid zijn aangewezen.3.De correcte verwijdering van uw oude toestelhelpt negatieve gevolgen voor het milieu en demenselijke gezondheid voorkomen.Smaltimento delle apparecchiature obsoleteKassering av din gamla apparatUw oude toestel wegdoen1.Ce symbole, représentant une poubelle surroulettes barrée d'une croix, signifie que leproduit est couvert par la directive européenne2002/96/EC.2.Les éléments électriques et électroniquesdoivent être jetés séparément, dans les vide-ordures prévus à cet effet par votre municipalité. 3.Une élimination conforme aux instructions aideraà réduire les conséquences négatives et risqueséventuels pour l'environnement et la santéhumaine.4.Pour plus d'information concernant l'éliminationde votre ancien appareil, veuillez contacter votremairie, le service des ordures ménagères ouencore la magasin où vous avez acheté ceproduit.Élimination de votre ancien appareilun bidone della spazzatura barrato da una crocesignifica che il prodotto è coperto dalla direttivaeuropea 2002/96/EC.2.Tutti i prodotti elettrici ed elettronici dovrebberoessere smaltiti separatamente rispetto allaraccolta differenziata municipale, medianteimpianti di raccolta specifici designati dalgoverno o dalle autorità locali.3.Il corretto smaltimento delle apparecchiatureobsolete contribuisce a prevenire possibiliconseguenze negative sulla salute umana esull'ambiente.4.Per informazioni più dettagliate sullo smaltimentodelle apparecchiature obsolete, contattare ilcomune, il servizio di smaltimento rifiuti o ilnegozio in cui è stato acquistato il prodotto. EnglishFrenchItalianSwedishDutchWEEE (for Europe )
Regulatory Information cont. 091.Wenn dieses Symbol eines durchgestrichenenAbfalleimers auf einem Produkt angebracht ist,unterliegt dieses Produkt der europäischenRichtlinie 2002/96/EC.2.Alle Elektro- und Elektronik-Altgeräte müssengetrennt vom Hausmüll über dafür staatlichvorgesehenen Stellen entsorgt werden.3.Mit der ordnungsgemäßen Entsorgung des altenGeräts vermeiden Sie Umweltschäden und eineGefährdung der persönlichen Gesundheit. 4.Weitere Informationen zur Entsorgung des altenGeräts erhalten Sie bei der Stadtverwaltung,beim Entsorgungsamt oder in dem Geschäft, woSie das Produkt erworben haben. 1.ŸÙ·Ó ¤Ó· ÚÔ˚fiÓ ‰È·ı¤ÙÂÈ ÙÔ ‰‡Ì‚ÔÏÔ ÂÓfi˜‰È·ÁÚ·Ì̤ÓÔ˘ οϷıÔ˘ ·ÔÚÚÈÌÌ¿ÙˆÓ, ÙfiÙ ÙÔ ÚÔ˚fiÓηχÙÂÙ·È ·fi ÙËÓ E˘Úˆ·˚΋ O‰ËÁ›· 2002/96/EOK.2.H ·fiÚÚÈ„Ë fiÏˆÓ ÙˆÓ ËÏÂÎÙÚÈÎÒÓ Î·È ËÏÂÎÙÚÔÓÈÎÒÓÚÔ˚fiÓÙˆÓ Ú¤ÂÈ Ó· Á›ÓÂÙ·È ¯ˆÚÈÛÙ¿ ·fi Ù· ÁÂÓÈοÔÈÎȷο ·ÔÚÚ›ÌÌ·Ù· ̤ۈ ηıÔÚÈṲ̂ӈÓÂÁηٷÛÙ¿ÛÂˆÓ Û˘ÏÏÔÁ‹˜ ·ÔÚÚÈÌÌ¿ÙˆÓ, ÔÈ Ôԛ˜¤¯Ô˘Ó ‰ËÌÈÔ˘ÚÁËı› ›Ù ·fi ÙËÓ Î˘‚¤ÚÓËÛË ‹ ·fi ÙȘÙÔÈΤ˜ ·Ú¯¤˜.3.H ÛˆÛÙ‹ ·fiÚÚÈ„Ë Ù˘ ·ÏÈ¿˜ Û·˜ Û˘Û΢‹˜ ı·‚ÔËı‹ÛÂÈ ÛÙËÓ ·ÔÙÚÔ‹ Èı·ÓÒÓ ·ÚÓËÙÈÎÒÓ Û˘ÓÂÈÒÓˆ˜ ÚÔ˜ ÙÔ ÂÚÈ‚¿ÏÏÔÓ Î·È ÙËÓ ˘Á›· ÙÔ˘ ·ÓıÚÒÔ˘.4.°È· ÈÔ ÏÂÙÔÌÂÚ›˜ ÏËÚÔÊÔڛ˜ Û¯ÂÙÈο Ì ÙËÓ·fiÚÚÈ„Ë Ù˘ ·ÏÈ¿˜ Û·˜ Û˘Û΢‹˜, ÂÈÎÔÈÓˆÓ‹ÛÙ ÌÂÙÔ ·ÚÌfi‰›Ô ÙÔÈÎfi ÁÚ·Ê›Ô, ˘ËÚÂÛ›· ‰È¿ıÂÛ˘ ÔÈÎÈ·ÎÒÓ·ÔÚÚÈÌÌ¿ÙˆÓ ‹ ÙÔ Ì·Á·Í› ·fi ÙÔ ÔÔ›Ô ·ÁÔÚ¿Û·Ù ÙÔÚÔ˚fiÓ.1.Tämä merkki tuotteessa tarkoittaa, että tuotekuuluu sähkö- ja elektroniikkalaiteromustaannetun EU-direktiivin 2002/96/EYsoveltamisalaan.2.Kaikki elektroniset laitteet ovat ongelmajätettä, joten ne on toimitettava paikalliseenkeräyspisteeseen.3.Vanhan laitteen asianmukainen hävittäminen ehkäisee mahdollisia ympäristöön ja terveyteen kohdistuvia haittavaikutuksia.4.Lisätietoa vanhan laitteen hävittämisestä saat ottamalla yhteyden paikallisiin viranomaisiin,kierrätyskeskukseen tai myymälään, josta ostit laitteen.1.Når der er et tegn med et kryds over enskraldespand, betyder det, at produktet eromfattet af EU-direktiv 2002/96/EC.2.Alle elektriske og elektroniske produkter skalsmides ud et andet sted end gennem denkommunale affaldsordning ved hjælp af specielleindsamlingsfaciliteter, der er organiseret af staten1.Si en un producto aparece el símbolo de un contenedorde basura tachado, significa que éste se acoge a laDirectiva 2002/96/CE.2.Todos los aparatos eléctricos o electrónicos se debendesechar de forma distinta del servicio municipal derecogida de basura, a través de puntos de recogidadesignados por el gobierno o las autoridades locales.3.La correcta recogida y tratamiento de los dispositivosinservibles contribuye a evitar riesgos potenciales para elmedio ambiente y la salud pública.4.Para obtener más información sobre cómo deshacerse desus aparatos eléctricos y electrónicos viejos, póngase encontacto con su ayuntamiento, el servicio de recogida debasuras o el establecimiento donde adquirió el producto. Vanhojen laitteiden hävittäminenEntsorgung von AltgerätenSådan smider du dit gamle apparat ud∞fiÚÚÈ„Ë Ù˘ ·ÏÈ¿˜ Û·˜ Û˘Û΢‹˜Cómo deshacerse de aparatos eléctricos yelectrónicos viejoseller de lokale myndigheder.3.Korrekt bortskaffelse af dit gamle apparat er medtil at forhindre mulige skadevirkninger på miljøetog menneskelig sundhed. 4.Mere detaljerede oplysninger om bortskaffelse afdit gamle apparat kan fås ved at kontakte ditlokale kommunekontor, renovationsselskab ellerden butik, hvor du købte produktet. FinnishGermanDanishGreekSpanish4.Wilt u meer informatie over de verwijdering vanuw oude toestel? Neem dan contact op met uwgemeente, de afvalophaaldienst of de winkelwaar u het product hebt gekocht.
Regulatory Information cont. 10 PortugueseSlovakCzechCroatianHungarianPolish
Regulatory Information cont. 11EstonianLatvianLithuanian

Navigation menu