LG Electronics USA 60PZ200UA Plasma tv & monitor User Manual

LG Electronics USA Plasma tv & monitor

User manual

www.lg.comP/NO : SAC34134216 (1012-REV01)OWNER’S MANUALLED LCD TV / LCD TV / PLASMA TVPlease read this manual carefully before operating the set and retain it for future reference.LED LCD TV MODELS19LV250022LV250026LV250032LV250032LV352042LV3520LCD TV MODELS22LK33026LK33032LK33032LK43042LK430PLASMA TV MODELS42PW34050PW34042PW35050PW35050PZ20060PZ20032LV350037LV350042LV350047LV350055LV350032LK45037LK45042LK45047LK45042LK52047LK52055LK52042PW350U50PW350U42PW350R50PW350R
2ENGENGLISHLICENSESLICENSESSupported licenses may differ by model. For more information about licenses, visit www.lg.com.Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, Inc. This is an official DivX Certified® device that plays DivX video. Visit www.divx.com for more information and software tools to convert your files into DivX video.ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to complete your registration. “DivX Certified® to play DivX® video up to HD 1080p, including premium content.”“DivX®, DivX Certified® and associated logos are registered trademarks of DivX, Inc. and are used under license.”“Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668; 7,515,710; 7,519,274”NOTEyPlasma : Plasma TVLCD : LED LCD TV, LCD TVyImage shown may differ from your TV.yYour TV's OSD (On Screen Display) may differ slightly from that shown in this manual.
3ENGENGLISHIMPORTANT SAFETY INSTRUCTIONSIMPORTANT SAFETY INSTRUCTIONSAlways comply with the following precautions to avoid dangerous situations and ensure peak performance of your product.TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.- TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.- TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.WARNING/CAUTIONRead these instructions.Keep these instructions.Heed all warning.Follow all instruction.yDo not use this apparatus near water.yClean only with dry cloth.yDo not block any ventilation openings. Install in accordance with the manufacturer’s instructions.yDo not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.yDo not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
4ENGENGLISHIMPORTANT SAFETY INSTRUCTIONSyProtect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.yOnly use attachments/accessories specified by the manufacturer.yUse only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.yUnplug this apparatus during lightning storms or when unused for long periods of time.yRefer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.yNever touch this apparatus or antenna during a thunder or lightning storm.yWhen mounting a TV on the wall, make sure not to install the TV by hanging the power and signal cables on the back of the TV.yDo not allow an impact shock or any objects to fall into the product, and do not drop anything onto the screen.yCAUTION concerning the Power Cord (Can differ by country): It is recommended that appliances be placed upon a dedicated circuit; that is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner’s manual to be certain. Do not connect too many appliances to the same AC power outlet as this could result in fire or electric shock. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized service. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. Do not move the TV with the power cord plugged in. Do not use a damaged or loose power cord. Be sure do grasp the plug when unplugging the power cord. Do not pull on the power cord to unplug the TV.yWarning - To reduce the risk of fire or electrical shock, do not expose this product to rain, moisture or other liquids. Do not touch the TV with wet hands. Do not install this product near flammable objects such as gasoline or candles, or expose the TV to direct air conditioning.
5ENGENGLISHIMPORTANT SAFETY INSTRUCTIONSyDo not expose to dripping or splashing and do not place objects filled with liquids, such as vases, cups, etc. on or over the apparatus (e.g. on shelves above the unit).yGroundingEnsure that you connect the earth ground wire to prevent possible electric shock (i.e. a TV with a three-prong grounded AC plug must be connected to a three-prong grounded AC outlet). If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes.Power SupplyShort-circuit BreakeryDISCONNECTING DEVICE FROM THE MAIN POWERThe power outlet must remain readily accessed in the event the device needs to be unplugged.yAs long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if the unit is turned off.yDo not attempt to modify this product in any way without written authorization from LG Electronics. Unauthorized modification could void the user’s authority to operate this product.yANTENNAS Outdoor antenna grounding(Can differ by country): If an outdoor antenna is installed, follow the precautions below. An outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits as death or serious injury can occur. Be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code (NEC) in the U.S.A. provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes and requirements for the grounding electrode. Antenna grounding according to the National Electrical Code, ANSI/NFPA 70NEC: National Electrical CodeGround ClampAntenna Lead in WireAntenna Discharge Unit(NEC Section 810-20)Grounding Conductor(NEC Section 810-21)Power Service GroundingElectrode System (NEC Art 250, Part H)Electric Service EquipmentGround ClampyCleaningWhen cleaning, unplug the power cord and wipe gently with a soft cloth to prevent scratching. Do not spray water or other liquids directly on the TV as electric shock may occur. Do not clean with chemicals such as alcohol, thinners or benzine.yMovingMake sure the product is turned off, unplugged and all cables have been removed. It may take 2 or more people to carry larger TVs. Do not press or put stress on the front panel of the TV.yVentilationInstall your TV where there is proper ventilation. Do not install in a confined space such as a bookcase. Do not cover the product with cloth or other materials while plugged. Do not install in excessively dusty places.yIf you smell smoke or other odors coming from the TV, unplug the power cord contact an authorized service center.yDo not press strongly upon the panel with hand or sharp object such as nail, pencil or pen, or make a scratch on it.yKeep the product away from direct sunlight.
6ENGENGLISHIMPORTANT SAFETY INSTRUCTIONSyDot DefectThe Plasma or LCD panel is a high technology product with resolution of two million to six million pixels. In a very few cases, you could see fine dots on the screen while you’re viewing the TV. Those dots are deactivated pixels and do not affect the performance and reliability of the TV.yGenerated Sound“Cracking” noise: A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to temperature and humidity. This noise is common for products where thermal deformation is required. Electrical circuit humming/panel buzzing: A low level noise is generated from a high-speed switching circuit, which supplies a large amount of current to operate a product. It varies depending on the product.This generated sound does not affect the performance and reliability of the product.yTake care not to touch the ventilation openings. When watching the TV for a long period, the ventilation openings may become hot.yViewing 3D Imaging (For 3D TV)- When viewing 3D imaging, watch the TV from an effective viewing angle and within the appropriate distance. If you exceed this viewing angle or distance, you may not be able to view the 3D imaging. Furthermore, the 3D imaging may not display if it is viewed while you are lying down.- If you watch the 3D imaging too closely or for a long period of time, it may harm your eyesight.- Watching the TV or playing video games that incorporate 3D imaging with the 3D glasses for a long period of time can cause drowsiness, headaches or fatigue to you and/or your eyes. If you have a headache, or otherwise feel fatigued or drowsy, stop watching the TV and take a rest.- Pregnant woman, seniors, persons with heart problems or persons who experience frequent drowsiness should refrain from watching 3D TV.- Some 3D imaging may cause you to duck or dodge the image displayed in the video. Therefore, it is best if you do not watch 3D TV near fragile objects or near any objects that can be knocked over easily.- Please prevent children under the age of 5 from watching 3D TV. It may affect their vision development. - Warning for photosensitization seizure: Some viewers may experience a seizure or epilepsy when exposed to certain factors, including flashing lights or images in TV or video games. If you or anybody from your family has a history of epilepsy or seizure, please consult with your doctor before watching 3D TV.Also certain symptoms can occur in unspecified conditions without any previous history. If you experience any of the following symptoms, immediately stop watching the 3D imaging and consult a doctor: dizziness or lightheadedness, visual transition or altered vision, visual or facial instability, such as eye or muscle twitching, unconscious action, convulsion, loss of conscience, confusion or disorientation, loss of directional sense, cramps, or nausea. Parents should monitor their children, including teenagers, for these symptoms as they may be more sensitive to the effects of watching 3D TV.Risk of photosensitization seizure can be reduced with the following actions.- Take frequent breaks from watching 3D TV.- For those who have vision that is different in each eye, they should watch the TV after taking vision correction measures.- Watch the TV so that your eyes are on the same level as the 3D screen and refrain from sitting too closely to the TV.- Do not watch the 3D imaging when tired or sick, and avoid watching the 3D imaging for a long period of time.- Do not wear the 3D glasses for any other purpose than viewing 3D imaging on a 3D TV.- Some viewers may feel disoriented after watching 3D TV. Therefore, after you watch 3D TV, take a moment to regain awareness of your situation before moving.
7ENGENGLISHIMPORTANT SAFETY INSTRUCTIONSyLCDIf the TV feels cold to the touch, there may be a small “flicker” when it is turned on. This is normal, there is nothing wrong with TV. Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots. However, they have no adverse effect on the TV’s performance. Avoid touching the LCD screen or holding your finger(s) against it for long periods of time. Doing so may produce some temporary distortion effects on the screen.DISPOSAL (Hg lamp only used in LCD TVs)The fluorescent lamp used in this product contains a small amount of mercury. Do not dispose ofthis product with general household waste. Disposal of this product must be carried out in accordance to the regulations of your local authority.For USA and CanadaFCC NOTICE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and the receiver. - Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation of the device. Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.NOTE TO CABLE/TV INSTALLERThis reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of the cable entry as practical.
8ENGENGLISHTABLE OF CONTENTSTABLE OF CONTENTS2 LICENSES3 IMPORTANT SAFETY IN-STRUCTIONS8 TABLE OF CONTENTS10 ASSEMBLING AND PREPARING10 Unpacking13 Optional Extras14 Parts and buttons21 Lifting and moving the TV21 Setting up the TV21 - Attaching the stand 27 - Mounting on a table29 - Mounting on a wall30 - Tidying cables31 REMOTE CONTROL34 WATCHING TV34 Connecting to an antenna or cable34 - Connecting an antenna or basic cable34 - Connecting a cable box35 Turning the TV on for the first time36 Watching TV36 Managing channels36 - Setting up channels37 - Using favorite channels38 - Checking current program info40 Using additional options40 - Adjusting aspect ratio41 - Changing AV modes41 - Using the input list42 - Locking the buttons on the TV (Child Lock)42 Using the quick menu43 Using the customer support43 - Testing the Picture / Sound43 - Using the product or service informa-tion44 3D IMAGING (FOR 3D TV)44 3D Technology45 - When using 3D Glasses45 - 3D Imaging Viewing Range46 Viewing 3D Imaging48 ENTERTAINMENT48 - Connecting USB storage devices49 - Browsing files51 - Viewing Videos54 - DivX registration code55 - Viewing Photos57 - Listening to music59 CUSTOMIZING TV SETTINGS59 The Main Menus60 Customizing Settings60 - CHANNEL Settings61 - PICTURE Settings65 - AUDIO Settings66 - TIME Settings67 - LOCK Settings69 - OPTION Settings71 MAKING CONNECTIONS72 Connection Overview73 Connecting to a HD receiver, DVD, or VCR player73 - HDMI Connection73 - DVI to HDMI Connection74 - Component Connection
9ENGENGLISHTABLE OF CONTENTS74 - Composite Connection75 Connecting to a PC75 - HDMI Connection75 - DVI to HDMI Connection76 - RGB Connection77 Connecting to an Audio System77 - Digital optical audio connection77 Connecting to a USB77 Connecting to a Headphone (LCD)78 SIMPLINK Connection78 - Activating and Using the SIMPLINK menus79 MAINTENANCE79 Cleaning Your TV79 - Screen and frame79 - Cabinet and stand79 - Power cord79 Preventing “Image burn” or “Burn-in” on your TV screen80 TROUBLESHOOTING82 SPECIFICATIONS88 IR CODES90 EXTERNAL CONTROL DEVICE SETUP97 OPEN SOURCE LICENSE
10ENGENGLISHASSEMBLING AND PREPARINGASSEMBLING AND PREPARINGUnpackingCheck your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and item.Remote control and batteries (AAA) Owner’s manual CDPolishing cloth1(Depending on model)FREEZERATIOL/R SELECTENTERBACK EXITQ.MENUINFOMENUCHVOLPAGEFAV3DMUTE1234567809MARKLISTFLASHBKENERGYSAVINGTVAV MODEINPUT1 Gently wipe the spots on the cabinet with the polishing cloth.
11ENGENGLISHASSEMBLING AND PREPARINGPW340, PW350, PW350U, PW350R, PZ200 seriesScrew for assembly Cable holder Power Cord holderPower Cord Protection cover Ferrite coreProtection cover tapeM4 x 26x 4M5 x 14.5x 3LV3500 seriesScrew for assembly Composite gender cable Cable holder Screw for fixingM4 x 12x 8LV2500 seriesScrew for assembly Cable holderM4 x 16x 2(For 32LV3500)M4 x 6x 2M4 x 28x 4M5 x 25x 3(For 60PZ200)(Other models)(For 50PW340, 50PW350)x 3(For 42PW340, 42PW350)22LK330Cable holder Protection cover Power Cord
12ENGENGLISHASSEMBLING AND PREPARINGCAUTIONyDo not use any unapproved items to ensure the safety and product life span.yAny damages or injuries by using unapproved items are not covered by the warranty. NOTEyThe items supplied with your product may vary depending on the model.yProduct specifications or contents of this manual may be changed without prior notice due to upgrade of product functions.yHow to use the ferrite core- (For PW340, PW350 series) Use the ferrite core to reduce the electromagnetic interference in the PC audio cable. Wind the PC audio cable on the ferrite core thrice. Place the ferrite core close to the TV.[to an External device]10 mm (+/-5 mm)[to the TV]- (For 42PW340, 42PW350)Use the ferrite core to reduce the electromagnetic interference in the power cable. Wind the power cable on the ferrite core once. Place the ferrite core close to the TV.[to a wall plug]10 mm (+/-5 mm)[to the TV]- (For 50PW340, 50PW350)Use the ferrite core to reduce the electromagnetic interference in the power cable. Wind the power cable on the ferrite core once. Place the ferrite core close to the TV and a wall plug.[to a wall plug]10 mm (+/-5 mm)10 mm (+/-5 mm)[to the TV]y(LCD) For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm (0.39 inches) thick and 18 mm (0.7 inches) width.BAAB*A 10 mm (0.39 inches)*B 18 mm (0.7 inches)26/32LK330, LK430, LK450, LK520 seriesScrew for assembly Screw for fixing Protection cover Power CordM4 x 20x 8(Except 47LK450, 47/55LK520)
13ENGENGLISHASSEMBLING AND PREPARINGOptional ExtrasOptional extras can be changed or modified for quality improvement without any notification.Contact your dealer for buying these items.This device only works with compatible LG LED LCD TV, LCD TV, or Plasma TV.3D Glasses(AG-S230, AG-S250, AG-S270)D-sub 15 pin signal cable11 When using the VGA (D-sub 15 pin signal cable) PC connection, use the shielded signal interface cable with a ferrite core to maintain standards compliance for the product.
14ENGENGLISHASSEMBLING AND PREPARINGParts and buttonsTouch button2Description/I Turns the power on or off.INPUT Changes the input source.HOME Accesses the main menus, or saves your input and exits the menus.ENTER ٜSelects the highlighted menu option or confirms an input.- VOL + Adjusts the volume level.v CH ^Scrolls through the saved channels.1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.2 All of the buttons are touch sensitive and can be operated through simple touch with your finger.PW340, PW350, PW350U, PW350R, PZ200 seriesAV IN 2L/MONORAUDIOVIDEOUSB ININ 3COMPONENT INVIDEOAUDIOYLPBPRRRGB IN (PC)AUDIO IN(RGB/DVI)ANTENNA/CABLEINRS-232C IN(CONTROL & SERVICE)REMOTECONTROL INOPTICALDIGITALAUDIO OUT AV IN 11/DVI INVIDEOAUDIOL/MONOR212ENTER CHVOLHOMEINPUTRemote control and intelligent1 sensorsUSB inputHDMI inputAV (Audio and Video) inputScreenSpeakersRear Connection panel(See p.71)Touch buttons2Side Connection panel
15ENGENGLISHASSEMBLING AND PREPARING32LV2500, LV3500 series NOTEyYou can set the power indicator light to on or off by selecting OPTION in the main menus.Touch button2DescriptionTurns the power on or off.INPUT Changes the input source.HOME Accesses the main menus, or saves your input and exits the menus.ENTER ٜSelects the highlighted menu option or confirms an input.- VOL + Adjusts the volume level.vCH^Scrolls through the saved channels.1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.2 All of the buttons are touch sensitive and can be operated through simple touch with your finger.IN 3USB INLANOPTICAL DIGITALAUDIO OUTANTENNA/CABLE INENTERCH VOL HOME INPUTAV IN 2VIDEO / AUDIOH/PANTENNA /CABLE INRS-232C IN(CONTROL & SERVICE)RGB IN(PC)(RGB/DVI)AUDIO INOPTICALDIGITALAUDIO OUT12VIDEO AUDIOCOMPONENT INYPBPRRLVIDEOAUDIOL/MONORAV IN 1/ DVI IN21USB ININ 3ScreenTouch buttons2Power indicatorRemote control and intelligent1 sensorsRear Connection panel(See p.71)Speakers
16ENGENGLISHASSEMBLING AND PREPARING19/22/26LV2500 Touch button2DescriptionTurns the power on or off.INPUT Changes the input source.HOME Accesses the main menus, or saves your input and exits the menus.ENTER ٜSelects the highlighted menu option or confirms an input.- VOL + Adjusts the volume level.vCH^Scrolls through the saved channels.1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.2 All of the buttons are touch sensitive and can be operated through simple touch with your finger.USB INVIDEO AUDIOCOMPONENT INYPBPRRL(RGB/DVI)AUDIO INOPTICALDIGITALAUDIO OUTRS-232C IN(CONTROL & SERVICE)RGB IN (PC)/ DVI IN21VIDEOAUDIORAV INL/MONODC-INENTERCH VOL HOME INPUTANTENNAINCABLEINScreenTouch buttons2Power indicatorRemote control and intelligent1 sensorsRear Connection panel(See p.71)SpeakersUSB inputHeadphoneoutputSide Connection panelNOTEyYou can set the power indicator light to on or off by selecting OPTION in the main menus.
17ENGENGLISHASSEMBLING AND PREPARINGLK450 seriesTouch button2DescriptionTurns the power on or off.INPUT Changes the input source.HOME Accesses the main menus, or saves your input and exits the menus.ENTER ٜSelects the highlighted menu option or confirms an input.- VOL + Adjusts the volume level.vCH^Scrolls through the saved channels.1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.2 All of the buttons are touch sensitive and can be operated through simple touch with your finger.ENTERCH VOL HOME INPUTUSB INVIDEOAUDIORL/MONOIN 3AV IN 212COMPONENT INYPBPRRLVIDEOAUDIORAV IN 1L/MONOANTENNA /CABLE INRS-232C IN(CONTROL & SERVICE)RGB IN (PC)OPTICAL DIGITALAUDIO OUT(RGB/DVI)AUDIO IN/ DVI IN21VIDEO AUDIOScreenTouch buttons2Power indicatorRemote control and intelligent1 sensorsRear Connection panel(See p.71)SpeakersUSB inputHDMI inputHeadphone outputAV (Audio and Video) inputSide Connection panelNOTEyYou can set the power indicator light to on or off by selecting OPTION in the main menus.
18ENGENGLISHASSEMBLING AND PREPARINGUSB INVIDEOAUDIORL/MONOIN 3AV IN 212COMPONENT INYPBPRRLVIDEOAUDIORAV IN 1L/MONOANTENNA /CABLE INRS-232C IN(CONTROL & SERVICE)RGB IN (PC)OPTICAL DIGITALAUDIO OUT(RGB/DVI)AUDIO IN/ DVI IN21VIDEO AUDIOHOME ENTER CHVOLINPUTINPUTHOMEENTERCHVOLLK330 seriesButton2Description/I Turns the power on or off.INPUT Changes the input source.HOME Accesses the main menus, or saves your input and exits the menus.ENTER ٜSelects the highlighted menu option or confirms an input.- VOL + Adjusts the volume level.vCH^Scrolls through the saved channels.1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.USB inputHDMI inputHeadphone outputAV (Audio and Video) inputSide Connection panel Screen(For 22LK330)(For 26/32LK330)SpeakersPower indicatorRemote control and intelligent1 sensorsRear Connection panel(See p.71)Buttons2Buttons2NOTEyYou can set the power indicator light to on or off by selecting OPTION in the main menus.
19ENGENGLISHASSEMBLING AND PREPARINGUSB INVIDEOAUDIORL/MONOIN 3AV IN 212COMPONENT INYPBPRRLVIDEOAUDIORAV IN 1L/MONOANTENNA /CABLE INRS-232C IN(CONTROL & SERVICE)RGB IN (PC)OPTICAL DIGITALAUDIO OUT(RGB/DVI)AUDIO IN/ DVI IN21VIDEO AUDIOCHVOLENTERHOMEINPUTLK430 seriesButton2Description/I Turns the power on or off.INPUT Changes the input source.HOME Accesses the main menus, or saves your input and exits the menus.ENTER ٜSelects the highlighted menu option or confirms an input.- VOL + Adjusts the volume level.vCH^Scrolls through the saved channels.1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.USB inputHDMI inputHeadphone outputAV (Audio and Video) inputSide Connection panel ScreenPower indicatorRemote control and intelligent1 sensorsRear Connection panel(See p.71)SpeakersButtons2NOTEyYou can set the power indicator light to on or off by selecting OPTION in the main menus.
20ENGENGLISHASSEMBLING AND PREPARINGUSB INVIDEOAUDIORL/MONOIN 3AV IN 212COMPONENT INYPBPRRLVIDEOAUDIORAV IN 1L/MONOANTENNA /CABLE INRS-232C IN(CONTROL & SERVICE)RGB IN (PC)OPTICAL DIGITALAUDIO OUT(RGB/DVI)AUDIO IN/ DVI IN21VIDEO AUDIOINPUTHOMEENTERCHVOLLK520 seriesButton2Description/I Turns the power on or off.INPUT Changes the input source.HOME Accesses the main menus, or saves your input and exits the menus.ENTER ٜSelects the highlighted menu option or confirms an input.- VOL + Adjusts the volume level.vCH^Scrolls through the saved channels.1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.USB inputHDMI inputHeadphone outputAV (Audio and Video) inputSide Connection panel ScreenPower indicatorRemote control and intelligent1 sensorsRear Connection panel(See p.71)SpeakersButtons2NOTEyYou can set the power indicator light to on or off by selecting OPTION in the main menus.
21ENGENGLISHASSEMBLING AND PREPARINGLifting and moving the TVWhen moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for save transportation regardless of its type and size.CAUTIONyAvoid touching the screen at all times, as this may result in damage to the screen. yIt is recommended to move the TV in the box or packing material that the TV originally came in.yBefore moving or lifting the TV, disconnect the power cord and all cables.yWhen holding the TV, the screen should face away from you to prevent damage.yHold the top and bottom of the TV frame firmly. Make sure not to hold the transparent part, speaker, or speaker grill area.yWhen transporting a large TV, there should be at least 2 people.yWhen transporting the TV by hand, hold the TV as shown in the following illustration.yWhen transporting the TV, do not expose the TV to jolts or excessive vibration.yWhen transporting the TV, keep the TV upright, never turn the TV on its side or tilt towards the left or right.Setting up the TVIf you are not mounting the TV to a wall, use the following instructions to attach the stand.Attaching the stand PW340, PW350, PW350U, PW350R, PZ200 series1Lay the TV with the screen side down on a flat surface.CAUTIONyLay a foam mat or soft protective cloth on the surface to protect the screen from damage. Make sure no objects press against the screen.2Assemble the parts of the STAND BODY with the STAND BASE of the TV.Model Screw for assemblyNumber of screws42/50PW34042/50PW35042/50PW350U42/50PW350R50PZ200M5 x 14.5 360PZ200 M4 x 25 3
22ENGENGLISHASSEMBLING AND PREPARING3Secure the TV and the stand with the 4 screws.Model Screw for assemblyNumber of screws42/50PW34042/50PW35042/50PW350U42/50PW350R50PZ200M4 x 26 460PZ200 M4 x 28 4CAUTIONyTighten the screws firmly to prevent the TV from tilting forward. Do not over tighten.To detach the stand,1Lay the TV with the screen side down on a flat surface.2Remove the 4 screws and pull the stand away from the TV.Model Screw for assemblyNumber of screws42/50PW34042/50PW35042/50PW350U42/50PW350R50PZ200M4 x 26 460PZ200 M4 x 28 43Push the supplied protection cover into the opening at the bottom of the TV until it locks in place.Attach the protection cover tape.- This will protect the opening from accumulating dust and dirt.- When installing the wall mounting bracket, use the Protection cover.Protection coverProtection cover tape
23ENGENGLISHASSEMBLING AND PREPARINGLV3500 series1Lay the TV with the screen side down on a flat surface.CAUTIONyLay a foam mat or soft protective cloth on the surface to protect the screen from damage. Make sure no objects press against the screen.2Assemble the parts of the STAND BODY with the STAND BASE of the TV.Screw for assembly Number of screwsM4 x 12 43Secure the TV and the stand with the 4 screws.Screw for assembly Number of screwsM4 x 12 4CAUTIONyTighten the screws firmly to prevent the TV from tilting forward. Do not over tighten.To detach the stand,1Lay the TV with the screen side down on a flat surface.2Remove the 4 screws and pull the stand away from the TV.Screw for assembly Number of screwsM4 x 12 4
24ENGENGLISHASSEMBLING AND PREPARINGLV2500 series1Lay the TV with the screen side down on a flat surface.CAUTIONyLay a foam mat or soft protective cloth on the surface to protect the screen from damage. Make sure no objects press against the screen.2Assemble the parts of the STAND BODY with the STAND BASE of the TV.Screw for assembly Number of screwsM4 x 6 13Secure the TV and the stand with the 2 screws.Screw for assembly Number of screwsM4 x 16 2CAUTIONyTighten the screws firmly to prevent the TV from tilting forward. Do not over tighten.To detach the stand,1Lay the TV with the screen side down on a flat surface.2Remove the 2 screws and pull the stand away from the TV.Screw for assembly Number of screwsM4 x 16 2
25ENGENGLISHASSEMBLING AND PREPARING22LK3301Lay the TV with the screen side down on a flat surface.CAUTIONyLay a foam mat or soft protective cloth on the surface to protect the screen from damage. Make sure no objects press against the screen.2Assemble the TV as shown.To detach the stand,1Lay the TV with the screen side down on a flat surface.2Remove the screws and pull the stand away from the TV.3Push the supplied protection cover into the opening at the bottom of the TV until it locks in place.This will protect the opening from accumulating dust and dirt.When installing the wall mounting bracket, use the Protection cover.Protection cover
26ENGENGLISHASSEMBLING AND PREPARING26/32LK330, LK430, LK450, LK520 series1Lay the TV with the screen side down on a flat surface.CAUTIONyLay a foam mat or soft protective cloth on the surface to protect the screen from damage. Make sure no objects press against the screen.2Assemble the parts of the STAND BODY with the STAND BASE of the TV.Screw for assembly Number of screwsM4 x 20 43Secure the TV and the stand with the 4 screws.Screw for assembly Number of screwsM4 x 20 4CAUTIONyTighten the screws firmly to prevent the TV from tilting forward. Do not over tighten.To detach the stand,1Lay the TV with the screen side down on a flat surface.2Remove the 4 screws and pull the stand away from the TV.Screw for assembly Number of screwsM4 x 20 43Push the supplied protection cover into the opening at the bottom of the TV until it locks in place.This will protect the opening from accumulating dust and dirt.When installing the wall mounting bracket, use the Protection cover.Protection cover
27ENGENGLISHASSEMBLING AND PREPARINGMounting on a table1Lift and tilt the TV into its upright position on a table.- Leave a 10 cm (4 inches) (minimum) space from the wall for proper ventilation.10 cm10 cm10 cm10 cm2Connect the power cord to a wall outlet.CAUTIONyDo not place the TV near or on sources of heat, as this may result in fire or other damage.NOTEySwivel 20 degrees to the left or right and adjust the angle of the TV to suit your view.2020Securing the TV to a table(For 26/32LK330, 32/42LK430, 32/37/42LK450, 42LK520, 32LV3500)Fix the TV to a table to prevent from tilting forward, damage, and potential injury.Mount the TV on a table, and then insert and tighten the supplied screw on the rear of the stand. WARNINGyTo prevent TV from falling over, the TV should be securely attached to the floor/wall per installation instructions. Tipping, shaking, or rocking the TV may cause injury.(4 inches)
28ENGENGLISHASSEMBLING AND PREPARINGSecuring the TV to a wall (optional)1Insert and tighten the eye-bolts, or TV brackets and bolts on the back of the TV.- If there are bolts inserted at the eye-bolts position, remove the bolts first.2Mount the wall brackets with the bolts to the wall.Match the location of the wall bracket and the eye-bolts on the rear of the TV.3Connect the eye-bolts and wall brackets tightly with a sturdy rope.Make sure to keep the rope horizontal with the flat surface.CAUTIONyMake sure that children do not climb on or hang on the TV.NOTEyUse a platform or cabinet that is strong and large enough to support the TV securely.yBrackets, bolts and ropes are optional. You can obtain additional accessories from your local dealer.Using the Kensington security system (optional)The Kensington security system connector is located at the rear of the TV. For more information of installation and using, refer to the manual provided with the Kensington security system or visit http://www.kensington.com.Connect the Kensington security system cable between the TV and a table.NOTEyThe Kensington security system is optional. You can obtain additional accessories from your local dealer.
29ENGENGLISHASSEMBLING AND PREPARINGMounting on a wallAttach an optional wall mount at the rear of the TV carefully and install the wall mount on a solid wall perpendicular to the floor. When you attach the TV to other building materials, please contact qualified personnel.We recommend that you use an LG brand wall mount when mounting the TV to a wall.10 cm10 cm10 cm10 cm Make sure to use screws and wall mounts that meet the VESA standard. Standard dimensions for the wall mount kits are described in the following table.Model 42/50PW34042/50PW35042/50PW350U42/50PW350R50PZ20060PZ200VESA (A x B) 400 x 400 600 x 400Standard screw M6 M8Number of screws 44Wall mount bracket (optional)PSW400B,PSW400BG,DSW400BGPSW600BModel 19/22/26LV250022/26LK33032LV250032LV350032LK33032LK43032LK450VESA (A x B) 100 x 100 200 x 100Standard screw M4 M4Number of screws 44Wall mount bracket (optional)LSW100B,LSW100BGLSW100B,LSW100BG(4 inches)Model 37LV350042LK43037/42/47LK45042/47LK52042/47/55LV350055LK520VESA (A x B) 200 x 200 400 x 400Standard screw M6 M6Number of screws 44Wall mount bracket (optional)LSW200B,LSW200BGLSW400B,LSW400BG,DSW400BGCAUTIONyDisconnect the power first, and then move or install the TV. Otherwise electric shock may occur.yIf you install the TV on a ceiling or slanted wall, it may fall and result in severe injury. Use an authorized LG wall mount and contact the local dealer or qualified personnel.yDo not over tighten the screws as this may cause damage to the TV and void your warranty.yUse the screws and wall mounts that meet the VESA standard. Any damages or injuries by misuse or using an improper accessory are not covered by the warranty.NOTEyUse the screws that are listed on the VESA standard screw specifications. yThe wall mount kit includes an installation manual and necessary parts.yThe wall mount bracket is optional. You can obtain additional accessories from your local dealer.yThe length of screws may differ depending on the wall mount. Make sure to use the proper length.yFor more information, refer to the manual supplied with the wall mount.
30ENGENGLISHASSEMBLING AND PREPARING22LK330, LV2500, LV3500 series1Gather and bind the cables with the cable holder.Cable holder26/32LK330, LK430, LK450, LK520 series1Gather and bind the cables with the cable management clip. 2Fix the cable management clip firmly to the TV. Cable management clipTidying cablesPW340, PW350, PW350U, PW350R, PZ200 series1Install the power cord holder and power cord. It will help prevent the power cable from being removed by accident.2Gather and bind the cables with the cable holder.Cable holderCAUTIONyDo not move the TV by holding the cable holder and power cord holder, as the cable holders may break, and injuries and damage to the TV may occur.(For 60PZ200)(Other models)Power cord holder
31ENGENGLISHREMOTE CONTROLMake sure to point the remote control at the remote control sensor on the TV.REMOTE CONTROLThe descriptions in this manual are based on the buttons of the remote control.Please read this manual carefully and use the TV correctly.To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching and ends to the label inside the compartment, and close the battery cover. Be sure to point the remote control at the remote control sensor on the TV.CAUTIONyDo not mix old and new batteries, as this may damage the remote control.ENERGY1234567809SAVINGTVAV MODEINPUTLISTFLASHBKENERGY1234567809SAVINGTVAV MODEINPUTLISTFLASHBKPOWERTurns the TV on or off.ENERGY SAVING (See p.61)Adjusts the Energy Saving settings.AV MODE (See p.41)Selects an AV mode.INPUT (See p.41)Rotates through inputs. Also switches the TV on from standby.TVReturns to the last TV channel.Alphanumeric buttonsEnters letters and numbers.LIST (See p.37)Accesses the saved channel list.- (Dash) Inserts a dash between numbers such as 2-1 and 2-2.FLASHBKAlternates between the two last channels selected (pressing repeatedly); Selects a channel on the currently selected channel list.
32ENGENGLISHREMOTE CONTROLVOLAdjusts the volume level.MARKSelects a menu or option.FAV (See p.37)Accesses your favorite channel list.3D (See p.44)Used for viewing 3D video.MUTEMutes all sounds.CHScrolls through the saved channels.PAGEMoves to the previous or next screen.CHVOLPAGEFAVRATIOMUTEMARKBACK EXITENTERQ.MENUINFOHomeVOLAdjusts the volume level.MARKSelects a menu or option.FAV (See p.37)Accesses your favorite channel list.RATIO (See p.40)Resizes an image.MUTEMutes all sounds.CHScrolls through the saved channels.PAGEMoves to the previous or next screen.CHVOLPAGEFAV3DMUTEMARKBACK EXITENTERQ.MENUINFOHome
33ENGENGLISHREMOTE CONTROLBACK EXITENTERQ.MENUINFOHome INFO (See p.38) Views the information of the current program.HomeAccesses the main menus, or saves your input and exit the menus.Q. MENU (See p.42)Accesses the quick menu.Navigation buttons (up/down/left/right) Scrolls through menus or options.BACKAllows the user to move back one step in an interactive application or other user interaction function.SIMPLINK (See p.78) Accesses the AV devices connected to the TV; Opens the SIMPLINK menu.EXITClears all on-screen displays and returns to TV viewing.3D SETTINGColored buttons These access special functions in some menus.3D SETTING ( Plasma ) (See p.46)Used for viewing 3D video.FREEZERATIOControl buttonsControls the SIMPLINK compatible devices (USB,SIMPLINK).FREEZE ( Plasma )Freezes the current frame (Not supported when using USB Mode and Simplink.).RATIO (See p.40)Resizes an image.
34ENGENGLISHWATCHING TVWATCHING TVConnecting to an antenna or cableConnect an antenna, cable, or cable box to watch TV referring to the following. The illustrations may differ from the actual items and a RF cable is optional.Connecting an antenna or basic cableConnect the TV to a wall antenna socket with a RF cable (75 Ω).NOTEyUse a signal splitter to use more than 2 TVs.yIf the image quality is poor, install a signal amplifier properly to improve the image quality.yIf the image quality is poor with an antenna connected, aim the antenna to the proper direction.yVisit http://lgknowledgebase.com for more information about the antenna and cable connection. Search for antenna.Connecting a cable boxConnect the TV to a cable box and the cable box to a wall antenna socket with 2 RF cables (75 Ω).CAUTIONyMake sure not to bend the copper wire of the RF cable.Copper wireyComplete all connections between devices, and then connect the power cord to the power outlet to prevent damage to your TV.
35ENGENGLISHWATCHING TVTurning the TV on for the first timeWhen you turn the TV on for the first time, the Initial setting screen appears. Select a language and customize the basic settings.1Connect the power cord to a power outlet.The Power indicator turns red and the TV switches to Standby mode.2In Standby mode, press POWER to turn the TV on. The Initial setting screen appears if you turn the TV on for the first time.NOTEyYou can also access Initial Setting by accessing OPTION in the main menu.3Follow the on-screen instructions to customize your TV settings according to your preferences.Language Selects a language to display.ØMode Setting Selects Home Use for the home environment.ØPower Indicator (LED LCD TV)Sets the power indicator.ØTime Zone Selects the time zone and daylight saving.ØAuto Tuning Scans and saves available channels automatically.NOTEyTo display images in the best quality for your home environment, select HomeUse.yStore Demo is suitable for the retail environment.yIf you select Store Demo, any customized settings will switch back to the default settings of Store Demo in 3 minutes.yPower Indicator feature is disabled in Store Demo mode.4When the basic settings are complete, press ENTER.NOTEyIf you do not complete the Initial setting, it will appear whenever the TV turns on.yDisconnect the power cord from the power outlet when you do not use the TV for a long period of time.5To turn the TV off, press POWER.
36ENGENGLISHWATCHING TVWatching TV1In Standby mode, press POWER to turn the TV on.2Press INPUT and select TV.3Control the TV using the following buttons while you are watching TV.Button DescriptionCH (^, v) Scrolls through saved channels.LIST1Selects a channel on the saved channel list.0 - 9 Selects a channel by entering numbers.VOL (+, -) Adjusts the volume level.MUTE Mutes all sounds.AV MODE2Selects an AV mode (See p.41).Q.MENU Accesses the quick menus (See p.42).FLASHBK Alternates between the last two channels selected.RATIO Resizes an image (See p.40).FREEZE Freezes the current frame while you are watching TV ( Plasma ).1 The Lock icon (ᯢ) appears in front of a channel blocked with parental control.2 Each AV mode has the optimized image and sound settings. If you select Off, the image and sound settings will be restored to the previously customized settings.4To turn the TV off, press POWER.The TV switches to Standby mode.Managing channelsSetting up channelsStoring channelsTo store channels automatically,1Press Home to access the main menus.2Press the Navigation buttons to scroll to CHANNEL and press ENTER.3Press the Navigation buttons to scroll to AutoTuning and press ENTER.4Select Start to start automatic tuning.The TV scans and saves available channels automatically.NOTEyIf the TV scans and saves channels, the previously saved channels will be overwritten.5When you are finished, press EXIT.When you return to the previous menu, press BACK.To store channels manually,1Press Home to access the main menus.2Press the Navigation buttons to scroll CHANNEL and press ENTER.3Press the Navigation buttons to scroll to Manual Tuning and press ENTER.4Scroll through the channel types, and then add or delete channels.5When you are finished, press EXIT.When you return to the previous menu, press BACK.NOTEyIf the TV scans a blocked channel, you will be prompted to enter your password to keep the channel scanned.yYou can store up to 1000 channels. The number of channels that you can store differs depending on the broadcasting signal environment.yThe channels are stored in the order of DTV,TV, Cable DTV and Cable TV.
37ENGENGLISHWATCHING TVEditing your channel list1Press Home to access the main menus.2Press the Navigation buttons to scroll to CHANNEL and press ENTER.3Press the Navigation buttons to scroll to Channel Edit and press ENTER.4Edit channels using the following buttons.Button Description^Highlights the channel type.^, v, < , >Scrolls through channel types or channels.ENTER Selects the highlighted channel to view.CH (^, v) Moves to the previous or next page.Blue buttonAdds or deletes a channel. The deleted channel displays in blue.FAV Registers or cancels the current channel in favorite channel list.Q.MENU Selects your desired favorite channel group.Yellowbutton Blocks or unblocks a channel. 5When you are finished, press EXIT.When you return to the previous menu, press BACK.Selecting a channel on the channel list1Press LIST to access the channel list.- To move to the previous or next page, press CH (^,v).- To tune to the "CHANNEL menu - ChannelEdit, press Blue button.2Select a channel you want and press ENTER.NOTEyThe Lock icon (ᯢ) appears in front of a channel blocked with parental control.yIf you select the blocked channel, you will be prompted to enter your password.Using favorite channelsAdd the channels that you watch frequently to the favorite list.Setting up your favorite list1Select a channel to add to the favorite list.2Press FAV.3Press the Navigation buttons to select your desired favorite channel group.4Press the Yellow button to register or cancel the current channel in favorite channel list.Press the Blue button to move to Channel Edit.5Press the Navigation buttons to scroll to Favorite.6Press ENTER to add the selected channel to the favorite list.7When you are finished, press EXIT.NOTEyYou can also setup Favorite List in the CHANNEL menu - Channel Edit.Selecting a channel on the favorite list1Press FAV to access the favorite list.- To move to the previous or next page, press CH (^,v).2Select a channel you want and press ENTER.
38ENGENGLISHWATCHING TVChecking current program infoPress ENTER to view the information of the currently program while you are watching. The following information appears at the top of the screen.Sun, Feb 21, 2010 10: 40 AM᯵0XOWLOLQJXDO᯸᯿&DSWLRQᰇLᯢ793*'/6910:10 AM 11:40 AM%ULHI,QIR7LWOH7HVW1H[W$01HZV&11᯦'79ᱏ᯻Start time Progress barBanner information Program title Current timeEnd timeIcon DescriptionMultilingual ᯵The program contains two or more audio language services. You can change the audio language using the quick menu.Dolby Digital ᯸The program contains a Dolby Digital audio signal in TV and HDMI input sources.Caption ᯿The program contains one or more language caption services. You can change the caption language using the quick menu.Aspect ratio ᰆᰇThe original aspect ratio of the video is 4:3.The original aspect ratio of the video is 16:9 (wide).ResolutionLSSLSThe video resolution is 720 x 480i.The video resolution is 720 x 480p.The video resolution is 1280 x 720p.The video resolution is 1920 x 1080i.The video resolution is 1920 x 1080p.Rating ᯢThe program contains Rating information. See "LOCK Settings" on p.67.
39ENGENGLISHWATCHING TVButton DescriptionINFO Shows current channel information.<or > Shows previous or next channel information.^or v Changes a channel.᯵0XOWLOLQJXDO᯸᯿&DSWLRQᰇLᯢ793*'/69%ULHI,QIR7LWOH7HVW᯦'79&11 ᯐ&K&KDQJH۽1H[Wᯙ:DWFK10:10 AM 11:40 AM1RLQIRUPDWLRQ6DUDK%UDGOH\6WHYH*UD\DQG%UHQGRQ3RQJLDSUHVHQWWKHODWHVWLQIDVKLRQWKHDUWVHQWHUWDLQPHQWOLIHVW\OHDQGFRRNLQJZLWKUHJXODUDQGVSHFLDOJXHVWV6DUDK%UDGOH\6WHYH*UD\DQG%UHQGRQ3RQJLDSUHVHQWWKHODWHVWLQIDVKLRQWKHDUWVHQWHUWDLQPHQWOLIHVW\OHDQGFRRNLQJᯱᯕ8Sᯕ'RZQ
40ENGENGLISHWATCHING TV Using additional options Adjusting aspect ratioResize an image to view at its optimal size by pressing RATIO while you are watching TV. NOTEyYou can also change the image size by pressing Q. MENU or accessing AspectRatio in the PICTURE menu.yThe available ratio varies depending on the input source.-16:9: Resizes images to fit the screen width.-Just Scan: Displays video images in the original size without cutting off the edges.NOTEyIf you select Just Scan, you may see image noises at the edge or edges of the screen.yThe input sources: DTV, Component, HDMI-DTV, and DVI-DTV (720p/1080i/1080p) support Just Scan.-Set By Program: Displays images in the same aspect ratio as the original image.-4:3: Resizes images to the previous standard 4:3.-Zoom: Formats an image to fit the screen width. The top and bottom of the image may not appear.NOTEIf you access, Aspect Ratio in the Quickmenus,yPress< or > to stretch an image vertically.yPress^ or v to move the zoom focus up or down.-Cinema Zoom: Formats an image to the cinemascope ratio, 2.35:1.yTo change the ratio of the cinema zoom, press< or > and its range is from 1 to 16.yTo move the zoom focus up or down, press^ or v.NOTEyIf you enlarge or reduce an image, the image may be distorted.
41ENGENGLISHWATCHING TVChanging AV modesEach AV mode has optimized image and sound settings.Press AV MODE repeatedly to select an appropriate mode.Mode DescriptionOff Changes to the previously customized settings.Cinema Uses the optimized image and sound settings for a cinematic look. Sport Uses the optimized image and sound settings for dynamic action sports.Game Uses the optimized image and sound settings for fast gaming.When playing a video game using PlayStation or Xbox. it is recommended to use the Game mode.When in Game mode, functions related to picture quality will be optimized for playing games.Using the input listSelecting an input source1Press INPUT to access the input sources.- The connected device displays on each input source.2Press the Navigation buttons to scroll to one of the input sources and press ENTER.,QSXW/LVW ᯒ0RYH ᯙ(QWHU79 USB $9 $9 &RPSRQHQW &RPSRQHQW5*%3& +'0, +'0, +'0,ᯕ,QSXW/DEHO ᰙ([LWInput source DescriptionTV Watch TV over the air, cable, and digital cable broadcast.USB Play media files from a thumb drive.AV Watch video from a VCR or other external devices.Component Watch video from a DVD or other external devices, or through a digital set-top box.RGB-PC Use the TV as a computer monitor.HDMI Watches video from a HTS or other high definition devices.The disconnected input sources will be gray.yTo add an input label, press the Blue button. You can easily identify a device connected to each input source.yIf you connect a new external device to the TV, a pop-up window appears. Select Yes on the pop-up window to switch to that input source.yIf you select “SIMPLINK and On”, the pop-up window for the HDMI input will not display.Adding an Input labelAdd a label to an input source so that you can easily identify a device connected to each input source.,QSXW/DEHOᯜ$9 ܁9&5 ۽$9 ܁۽&RPSRQHQW ܁۽&RPSRQHQW ܁۽5*%3& ܁۽ᯝ&ORVH1Press INPUT to access the input sources.2Press the Navigation buttons to scroll to one of the input sources.3Press the Blue button.4Press the Navigation buttons to scroll to one of the input labels and press ENTER.5When you are finished, press EXIT.When you return to the previous menu, press BACK.
42ENGENGLISHWATCHING TVLocking the buttons on the TV (Child Lock)Lock the buttons on the TV to prevent any unwanted operations or accidents by children.1Press Home to access the main menus.2Press the Navigation buttons to scroll to LOCKand press ENTER.3Input password.4Press the Navigation buttons to scroll to Key Lock and press ENTER.5Select On to activate the Key lock feature.- To deactivate the Key lock feature, select Off.6When you are finished, press EXIT.When you return to the previous menu, press BACK.NOTEyThe TV is programmed to remember the last setting after you turn the TV off.yIf you turn the TV off with the Key lock feature activated, ,INPUT,CH (^,v) or Number buttons on the remote control. yIf you press any button on the TV with the Key lock feature activated, Key Lock appears on the screen.Using the quick menuCustomize frequently used menus.1Press Q. MENU to access the quick menus.2Press the Navigation buttons to scroll through the following menus.A16:9 ᯙ܁$VSHFW5DWLR۽81234765Menu Description1Aspect Ratio Changes the image size (16:9, Just Scan, Set By Program, 4:3, Zoom, Cinema Zoom).2Picture Mode Changes the image mode (Intelligent sensor1, Vivid, Standard, APS1, Cinema, Sport, Game, Expert1, Expert2).3Sound Mode Changes the sound mode (Standard, Music, Cinema, Sport, Game).4Multi Audio Changes the audio language (Digital signal).SAP Changes the MTS sound (Analog signal).5Sleep Timer Sets the length of time until the TV to turns off.6Del/Add Edits the channels to add or delete the channel.7Caption Activates or deactivate the subtitles.8USB Device Ejects a USB device when a USB device is connected.1 Depending on modelNOTEyThe available menus and options may differ from the input source that you are using.3Press the Navigation buttons to scroll to the option you want.4When you are finished, press Q. MENU.
43ENGENGLISHWATCHING TVUsing the customer supportTesting the Picture / SoundTo execute picture and sound tests.1Press Home to access the main menus.2Press the Red button to access CustomerSupport.3Press the Navigation buttons to scroll PictureTest or Sound Test and press ENTER.4If you have any problem, press the Navigation buttons to scroll to Yes and press ENTER.5When you are finished, press EXIT.When you return to the previous menu, press BACK.Using the product or service informationTo check the product or service information1Press Home to access the main menus.2Press the Red button to access CustomerSupport and press ENTER.3Press the Navigation buttons to scroll Product/Service Info..You can check the various product/Service infomation based on your model. 4When you are finished, press EXIT.When you return to the previous menu, press BACK.
44ENGENGLISH3D IMAGING3D IMAGING (FOR 3D TV)3D TechnologyThis TV can display in 3D via 3D broadcasting or when the TV is connected to a compatible device, such as a Blu-ray 3D Player. The viewer must wear compatible 3D glasses in order to see these images in 3D format.WARNINGyWhen viewing 3D imaging, watch the TV from an effective viewing angle and within the appropriate distance. The appropriate angle and distance are provided in this manual. If you exceed this viewing angle or distance, you may not be able to view the 3D imaging. Furthermore, the 3D imaging may not display if it is viewed while you are lying down (For LED LCD TV).yIf you watch the 3D imaging too closely or for a long period of time, it may harm your eyesight.yWatching the TV or playing video games that incorporate 3D imaging with the 3D glasses for a long period of time can cause drowsiness, headaches or fatigue to you and/or your eyes. If you have a headache, or otherwise feel fatigued or drowsy, stop watching the TV and take a rest.yPregnant woman, seniors, persons with heart problems or persons who experience frequent drowsiness should refrain from watching 3D TV.ySome 3D imaging may cause you to duck or dodge the image displayed in the video. Therefore, it is best if you do not watch 3D TV near fragile objects or near any objects that can be knocked over easily.yPlease prevent children under the age of 5 from watching 3D TV. It may affect their vision development.yWarning for photosensitization seizure:Some viewers may experience a seizure or epilepsy when exposed to certain factors, including flashing lights or images in TV or video games. If you or anybody from your family has a history of epilepsy or seizure, please consult with your doctor before watching 3D TV.Also certain symptoms can occur in unspecified conditions without any previous history. If you experience any of the following symptoms, immediately stop watching the 3D imaging and consult a doctor: dizziness or lightheadedness, visual transition or altered vision, visual or facial instability, such as eye or muscle twitching, unconscious action, convulsion, loss of conscience, confusion or disorientation, loss of directional sense, cramps, or nausea. Parents should monitor their children, including teenagers, for these symptoms as they may be more sensitive to the effects of watching 3D TV.yRisk of photosensitization seizure can be reduced with the following actions.»Take frequent breaks from watching 3D TV.»For those who have vision that is different in each eye, they should watch the TV after taking vision correction measures.»Watch the TV so that your eyes are on the same level as the 3D screen and refrain from sitting too closely to the TV.»Do not watch the 3D imaging when tired or sick, and avoid watching the 3D imaging for a long period of time.»Do not wear the 3D glasses for any other purpose than viewing 3D imaging on a 3D TV.»Some viewers may feel disoriented after watching 3D TV. Therefore, after you watch 3D TV, take a moment to regain awareness of your situation before moving.
45ENGENGLISH3D IMAGINGNOTEyTo watch the TV in 3D, you must put on your 3D glasses. For best results, you should wear LG Brand 3D glasses. The 3D imaging may not display properly when using another brand of 3D glasses. Please see the 3D glasses manual for instructions on how to use the 3D glasses.yAfter powering on the TV, a few seconds may be needed for your TV to calibrate. yIt may take a moment for you to see the 3D imaging if you look away from the TV and then revert your eyes back to the 3D program.yThe TV may flicker slightly if the 3D imaging is displayed under 3 wavelength fluorescent light (50 Hz - 60 Hz) or magnetic fluorescent lamp (50Hz - 60 Hz). In such instances, it is recommended to turn the lights off.yIf there is an obstacle between the TV and the 3D glasses, the 3D imaging may not display properly.yDo not use the TV in close proximity to other electronic and RF equipments.yIn Analog TV, 3D Imaging does not work.yWhen watching 2D images, it is recommended to take off the 3D glasses. If you watch 2D images with the 3D glasses on, you may see distorted images.When using 3D GlassesCAUTIONy3D glasses are sold separately. Refer to the 3D glasses manual for operating instructions.yDo not use the 3D glasses to replace your corrective glasses, sunglasses or protective goggles.yDo not store the 3D glasses in hot or cold locations.yDo not drop objects onto the 3D glasses. Do not drop or bend the glasses.ySince the lenses of the 3D glasses are easily scratched, make sure to clean only with a soft cloth. Shake off any dust before using the cloth since the glasses are easily scratched.3D Imaging Viewing RangeTV size, viewing angle & other circumstances may change the viewing distance and the angle of view.Viewing Distance Viewing Angle2 m - 10 m (6.5 ft - 32.8 ft)120 ° (When the viewing distance is 2 m (6.5 ft))
46ENGENGLISH3D IMAGING Viewing 3D Imaging1 Play the video produced in 3D.2 Press 3D.3 Press the Navigation buttons to scroll the 3Dvideo or 2D video and press ENTER.4 Press the Navigation buttons to select the shape and press ENTER.Mode Description2D » 3D Changed from 2D imaging to 3D imaging.Side by SideTop & BottomChecker BoardFrameSequential5 Wear the 3D glasses.6 Press the Navigation buttons to scroll to Enterand press ENTER. (QWHU &DQFHOPower on your 3D glasses and put them on. Sit 2 meters from TV to enjoy the best 3D view.ᯕ'6HWWLQJ7 Press the 3D button to Turn off 3D mode or Turn off 2D mode. (QWHU &DQFHOTurn off 3D Mode.ᯕ'6HWWLQJ'PRGH(QWHU &DQFHOTurn off 2D Mode.'YLGHR Using 3D quick menu option1 Press 3D SETTING.2 Use the following options while viewing 3D imaging.'6HWWLQJ(QWHU (QG'YLGHR'3LFWXUH6L]H ܁-XVW6FDQ ۽''HSWK ܁۽'9LHZSRLQW ܁۽'3LFWXUH%DODQFH ܁2II ۽'3LFWXUH&RUUHFWLRQ ܁/HIW5LJKW ۽Button Description3D Picture SizeCuts off the outer edges of the picture and stretch it to fit the full screen in 3D mode.3D DepthAdjusts the distance between the object and the background in the picture to enhance the 3D effect in 2D to 3D mode.3D ViewpointBrings the picture (including both the object and background images) to the front or back to enhance the 3D effect in 3D mode.3D PictureBalanceAdjusts the color and brightness difference between the right and left sides of the picture in 3D mode.3D PictureCorrectionChanges the order of images in the right and left sides of the picture in 3D mode.
47ENGENGLISH3D IMAGINGCAUTIONySome menus may not work while watching the TV in 3D.yThe 3D imaging mode is disabled automatically when switching DTV channels.yThe screen may not be displayed properly if you view 2D DTV images in 3D imaging mode.y3D effect can be seen when 3D Mode is selected appropriately for the 3D input signal supplied to the TV.yFor *mpo files (3D camera files), the 3D imaging mode is enabled automatically. y3D may not be displayed properly for some PC graphics cards.NOTEyEnergy Saving is disabled while playing in 3D.
48ENGENGLISHENTERTAINMENTENTERTAINMENTConnecting USB storage devicesConnect USB storage devices such as a USB flash drive, external hard drive, or MP3 player to the TV and use multimedia features (See "Browsing files" on p. 49).Connect a USB flash drive or USB memory card reader to the TV as shown in the following illustration.orUSB ININ3USB INTo disconnect a USB storage device, make sure to end the connection properly to prevent damages to the TV or files.1Press Q.MENU to access the quick menus.2Press the Navigation buttons to scroll to USBDevice and press ENTER.3Disconnect the USB storage device only when the message says that it is safe to remove.CAUTIONyDo not turn the TV off or remove a USB storage device while the USB storage device is connected to the TV, as this could result in loss of files or damage to the USB storage device.yBack up your files saved on a USB storage device frequently, as you may lose or damage the files and this may be not covered by the warranty.Tips for using USB storage devicesyThe TV recognizes only a USB storage device.yIf you connect a USB storage device to the TV through a USB hub, your TV may not recognize the USB storage device.yThe TV may not recognize a USB storage device that requires a special driver.yThe recognition speed of a USB storage device may differ depending on the device.yOnly use a USB storage device which has normal music or image files.yUse only USB storage devices that are formatted as a FAT 32 or NTFS file system.yIf you format a USB storage device as a NTFS file system, you cannot delete the saved files.yYou may need to connect a USB storage device to an external power supply with a power adapter.yIf the TV does not recognize a connected USB storage device, replace the cable and try again. Do not use an excessively long cable.yThe TV does not support some USB storage devices properly.yYou can use a multi-partition (up to 4) USB storage device.yYou can use up to 4 USB storage devices at a time by using a USB multi-card reader.yThe file alignment method of a USB storage device is similar to the one of Window XP.yYou cannot create or delete a folder saved in a USB storage device directly on the TV.yThe number of characters for a file name is up to 100 English characters.yIf there are too many folders and files in one folder, it may not operate properly.yThe recommended capacity for a USB external hard disk is 1 TB or less and for a USB storage device is 32 GB or less.yIf a USB external hard disk with the Energy Saving feature does not work, turn the USB external hard disk off and on again to make it work properly. For more information, refer to the user manual of the USB external hard disk.yUSB storage devices below USB 2.0 are supported as well. But they may not work properly in the movie list.
49ENGENGLISHENTERTAINMENTBrowsing filesAccess the photo, music, or movie lists and browse files.1Connect a USB storage device.2Press Home to access the main menus.3Press the Navigation buttons to scroll to MYMEDIA and press ENTER.4Press Navigation buttons to scroll to MOVIELIST,PHOTO LIST, or MUSIC LIST and press ENTER.0RYLH/LVW0<0(',$3KRWR/LVW 0XVLF/LVW5Select Drive1 to access the connected USB storage device.6Press the Navigation buttons toSelect a folder/file you want.3DJH0RYLH/LVW3DJH86%;7,&.ᯒ0RYHᯙ3OD\᱇3DJH&KDQJH᱅0DUN'ULYHM1 M2 0 M40 %XWWHUIO\Bᯕ7R3KRWR/LVW ᯕ&KDQJH1XPEHUV ᯕ0DUN0RGH ᰿([LW123453DJH3KRWR/LVW3DJH3 3 3 3 3 3 3 3 33 3 3 3 3 386%;7,&.ᯒ0RYHᯙ9LHZ᱇3DJH&KDQJH᱅0DUNᯕ7R0XVLF/LVW ᯕ&KDQJH1XPEHUV ᯕ0DUN0RGH ᰿([LW'ULYH123450XVLF/LVW%PS00:00%PS00:00%PS00:00%PS00:00%PS00:00ᯒ0RYHᯙ3OD\᱇3DJH&KDQJH᱅0DUNᯕ7R0RYLH/LVW ᯕ&KDQJH1XPEHUV ᯕ0DUN0RGH ᰿([LW86%;7,&.3DJH3DJH'ULYH12345No. Description1Moves to the previous folder.2Current page number/total number of pages3Current page number/total number of pages4Contents under the folder focused on 15Available buttons on the remote controlButton DescriptionGreenbuttonMoves to Photo List,Music List, or Movie List.YellowbuttonChange Numbers: Changes the number or thumbnails displayed at a time.Bluebutton Allows you to mark certain files.Tips for using USB storage devicesType Supported File FormatsVideo yMPG, MPEG, DAT, TS, TRP, TP, VOD, MP4, MOV, MKV, DivX, AVI, Motion JPEG (AVI, MP4, MKV), ASF, WMV, FLVyResolution:under 1920 pixel (width) x 1080 pixel (height)yFrame Rate:under 30 frame/sec (1920 x 1080), under 60 frame/sec (1280 x 720) yMax bitrate of playable movie file: 20 Mbps (Mega bit per second)yBit rate of audio format: within 32 kbps to 320 kbps (MP3)ySupported subtitle format: *.smi, *.srt, *.sub (MicroDVD, SubViewer 1.0/2.0), *.ass, *ssa, *txt (TMPlayer), *.psb (PowerDivX)
50ENGENGLISHENTERTAINMENTType Supported File FormatsPhoto yJPGyAvailable sizeBaseline: 64 pixel (W) x 64 pixel (H) - 15360 pixel (W) x 8640 pixel (H)Progressive: 64 pixel (W) x 64 pixel (H) - 1920 pixel (W) x 1440 pixel (H)* Do not use the progressive option when saving JPG files on your PC.yIt may take some time to open high-resolution images in full screen.For 3D TVFileExtensionsItem Profile2D jpegjpgjpeSupprotedfile formatySOF0:baselineySOF1: Extend SequentialySOF2:ProgressivePhoto size yMin: 64 x 64yMax - Normal Type: 15360 (W) x 8640 (H)yProgressiveType: 1920 (W) x 1440 (H)3D mpo Supprotedfile formatympoPhoto sizey4:3 size: 3,648 x 2,7362,592 x 1,9442,048 x 1,536y3:2 size: 3,648 x 2,432Music yMP3yBit rate range 32 Kbps - 320 KbpsySampling rate (Sampling Frequency)MPEG1 layer 3: 32 kHz, 44.1 kHz, 48 kHzMPEG2 layer 3: 16 kHz, 22.05 kHz, 24 kHzMPEG2.5 layer 3: 8 kHz, 11.025 kHz, 12 kHz* A copy-protected file will not play.
51ENGENGLISHENTERTAINMENTViewing VideosYour TV can display video files from a USB storage device.1Press Home to access the main menus.2Press the Navigation buttons to scroll to MYMEDIA and press ENTER.3Press the Navigation buttons to scroll to MovieList and press ENTER.4Select Drive1 to access the connected USB storage device.5Press the Navigation buttons to scroll to a folder/file you want and press ENTER.6Play a movie by using the following menus/buttons.3DJH0RYLH/LVW3DJH86%;7,&.ᯒ0RYHᯙ3OD\᱇3DJH&KDQJH᱅0DUN'ULYHM1 M2 0 M40 %XWWHUIO\Bᯕ7R3KRWR/LVW ᯕ&KDQJH1XPEHUV ᯕ0DUN0RGH ᰿([LW3DJH0RYLH/LVW3DJH86%;7,&.0DUN0RGHᯒ0RYHᯙ0DUN᱇3DJH&KDQJH᱅0DUN'ULYHM1 M2 0 M40 %XWWHUIO\Bᯕ3OD\0DUNHG ᯕ0DUN$OO ᯕ8QPDUN$OO ᯕ([LW0DUN0RGH ᰿([LWButton DescriptionNavigationbutton Scrolls through the files.ENTER Plays the highlighted file or enters the mark mode.CH (^,v)Moves to the previous or next page.MARK Enters the mark mode.Menu DescriptionPlay Marked Plays the selected video.Mark All Selects all files.Unmark All Clears all of your selections.Exit Mark Mode Exit the Mark Mode.NOTEy : Abnormal files are displayed using this graphic.y: Non-supported files are displayed using this graphic.7Control playback by using the following buttons.ᯚᯛᰧ ᰦ ᰨ ᰪ ᰩ ᰚ ᱭ2SWLRQ ᰙ+LGH ᰿([LWᰦButton DescriptionᰧStops the playback.ᰦPlays a video.ᰨPauses or resumes the playback.ᰪScans backward in a file.ᰩScans forward in a file.ᰨ and ᰩPlays videos in slow motion.<or >Skips to specific points in a file during playback. The time of a specific point will appear on the status bar. In some files, this function may not work properly.ENERGYSAVINGIncreases or deceases the brightness of your screen.Q.MENU Shows the Option menu (See p.52).AV MODE Selects the desired source.BACKHides the menu on screen.To see the menu again, press ENTER button to display.EXIT Returns to TV viewing.Tips for playing video filesySome user-created subtitles may not work properly.ySubtitles may not display some special characters or HTML tags.ySubtitles in the non-supported languages are unavailable.yThe time information in an external subtitle file should be arranged in ascending order to play.
52ENGENGLISHENTERTAINMENTyThe screen may suffer from temporary interruptions such as image stoppage or faster playback when you change the audio language.yIf you play a damaged video file, the video file may not be played correctly or some player functions may not be unavailable.yThe TV may not properly play the video files produced with certain encoders.yIf the recorded file does not have video or audio, either video or audio is not outputtedyIf the TV plays the recorded file without video or audio, either video or audio is not outputted.yThe TV may not smoothly play the video files with a resolution higher than the supported resolution for each frame.yThe TV may not properly play the video files not included on the specified type and format.yThe TV may not play the files encoded with GMC (Global Motion Compensation) or quarter-pel motion estimation.yThe TV supports the only files saved in ASCII code in subtitles.yThe maximum number of characters displayed on each subtitle line is 250 (Korean), 500 (English), and 500 (Numbers).yThe TV supports the only 10,000 sync blocks within the subtitle file.yThe TV supports the H.264 codec up to the profile level 4.1.yThe TV does not support DTS audio codec.yThe TV cannot play a video file whose size is larger than 30 GB.yIf you play a video file through the USB connection that does not support the high speed, the video player may not work properly.yThe TV supports a USB storage device whose version is lower than 2.0. However, the USB storage device may not work properly in the movie list.yThe video file and its subtitle should be in the same folder and the name of the video file and subtitle should be identical.yYou can adjust the image by using ENERGYSAVING and AV MODE. But you cannot customize image options of each mode.yThe TV may not play the video files in the supported file format depending on the encoded condition.yThe TV will not play the video files that has a damaged index or no index.Q.MENU options for movie list1Press Q. MENU.A pop-up window will appear.2Press the Navigation buttons to scroll to movie list option and press ENTER.3Press the Navigation buttons to scroll to one of the following options and press ENTER.Set Video Play.Option DescriptionPicture SizeSelects your desired picture format for videos.yFull Mode: Files are played in full screen mode according to the aspect ratio of video.yOriginal Mode: Files are played in their native size.AudioLanguageChanges the Language Group of the audio for video files. Files with a single audio track cannot be selected.SubtitleLanguageThe subtitles can be turned on or off.LanguageActivated for SMI subtitles and can select the language within the subtitle.Code PageSubtitle font selection. When set to default, contents are displayed in the language set in "Option - Language - Menu Language."SubtitleLanguage GroupSupportedLanguageLatin1 English, Spanish, FrenchKorean English, KoreanSyncIf the video is not synchronizedwith the captions, it can be adjusted by 0.5 second.Position Move the location of the subtitles.Size Changes the subtitle font size.RepeatTurn on/off repeat function of movie playback. When turned on, the file within the folder will be played back repeatedly. When turned off, if the next file name is similar to the previous file, it can be played sequentially.
53ENGENGLISHENTERTAINMENTNOTEyWhen replaying a video file after stopping, select “Yes” to restart where it previously stopped.yIf continuous series files exist within the folder, the next file will automatically be played. But, this excludes cases when the Repeat function of Movie List Option is turned “On” (See p.52) or when set as PlayMarked.Set Video.Allows you to change Video presets. (Refer to "PICTURE Settings" on p.61).Set Audio.Allows you to change Audio presets. (Refer to "AUDIO Settings" on p.65).
54ENGENGLISHENTERTAINMENTDivX registration codeRegistering the DivX codeThe DivX registration code allows you to rent or purchase the latest movies at www.divx.com/vod. To play a rented or purchased DivX file, the file’s registration code should be same as your TV’s DivX registration code.1Press Home to access the main menus.2Press the Navigation buttons to scroll to MYMEDIA and press ENTER.3Press the Blue button.4Press the Navigation buttons to scroll to DivXVOD Registration and press ENTER.5View the registration code of your TV.&ORVH<RXPXVWUHJLVWHU\RXUGHYLFHWRSOD\'LY;SURWHFWHGYLGHRV5HJLVWUDWLRQFRGH[[[[[[[[[[5HJLVWHUDWKWWSYRGGLY[FRPL6When you are finished, press ENTER.NOTEyWhile you are checking the registration code, some buttons may not work.yIf you use the DivX registration code of another device, you cannot play the rented or purchased DivX file. Make sure to use the DivX registration code assigned to your TV.yThe video or audio files that are not converted by the standard DivX codec may be corrupted or not be played.yThe DivX VOD code allows you to activate up to 6 devices under one account.Deactivating the DivX featureYou can deactivate all of the devices through the web server and block devices from activating.Delete the existing authentication information to receive a new DivX user authentication for the TV. Once this function is executed, a DivX user authentication is required again to see DivX DRM files.1Press Home to access the main menus.2Press the Navigation buttons to scroll to MYMEDIA and press ENTER.3Press the Blue button.4Press the Navigation buttons to scroll to DivXDeregistration and press ENTER.5Select Yes to confirm.<HV 1R'HUHJLVWUDWLRQFRGH********'HUHJLVWHUDWKWWSYRGGLY[FRP&RQWLQXHZLWKUHJLVWUDWLRQ"L6When you are finished, press EXIT.When you return to the previous menu, press BACK.
55ENGENGLISHENTERTAINMENTViewing PhotosYou can view image files saved on a USB storage device. The displays on the screen may differ based on the model.1Press Home to access the main menus.2Press the Navigation buttons to scroll to MYMEDIA and press ENTER.3Press the Navigation buttons to scroll to PhotoList and press ENTER.4Select Drive1 to access the connected USB storage device.5Press the Navigation buttons to scroll to a folder/file you want and press ENTER.6View photos by using the following menus/buttons.3DJH3KRWR/LVW3DJH3 3 3 3 3 3 3 3 33 3 3 3 3 386%;7,&.ᯒ0RYHᯙ9LHZ᱇3DJH&KDQJH᱅0DUNᯕ7R0XVLF/LVW ᯕ&KDQJH1XPEHUV ᯕ0DUN0RGH ᰿([LW'ULYH3DJH3KRWR/LVW3DJH3 3 3 3 3 3 3 3 33 3 3 3 3 386%;7,&.0DUN0RGHᯒ0RYHᯙ0DUN᱇3DJH&KDQJH᱅0DUNᯕ9LHZ0DUNHG ᯕ0DUN$OO ᯕ8QPDUN$OO ᯕ([LW0DUN0RGH ᰿([LW'ULYHButton DescriptionNavigationbutton Scrolls the file.ENTER Views the highlighted file or enters the mark mode.CH (^,v)Moves to the previous or next page.MARK Enters the mark mode.Menu DescriptionView Marked Views the selected photo.Mark All Selects all filesUnmark All Clears all of your selections.Mark Mode Exits the Mark Mode.NOTEy : Abnormal files are displayed using this graphic.y : Non-supported files are displayed using this graphic.7The following options are available while viewing photos.܁۽BDMSJ[.%܁ ۽6OLGHVKRZᱥ %*0ᱥ ᱨ ᯶ ᰚ ᱭ2SWLRQ ᰙ+LGH ᰿([LWOption DescriptionSlideshowyStarts or stops a slideshow with selected photos.yIf there are no selected photos, all photos saved in the current folder display during a slideshow.yTo set a slideshow speed, select Option.BGM(BackgroundMusic)yTurns the background music on or off. To set the background music folder, select Option.NOTEyYou can't change or set-up the BGM while viewing the *.mpo files (3D camera file).ᱨ (Rotate)Rotates photos clockwise (90°, 180°, 270°, 360°).NOTEyThe supported photo size is limited. You cannot rotate a photo if the resolution of the rotated width is larger than the supported resolution size.᯶(Zoom In) Views the photo by zoom in 2, 4 times by using Blue button.ᰚ(ENERGYSAVING)Increases or decreases the brightness of your screen.Option Shows the Option menu (See p.56).HideHides the option window. To display the options, press ENTER.Exit Moves to the previous menu screen.
56ENGENGLISHENTERTAINMENTNOTEyOption values changed in Photo List do not affect Movie List and Music List.yOption values changed in Photo List or Music List are changed likewise in Photo List and Music List, but not Movie List.Q.MENU options for photo list1Press Q. MENU.A pop-up window will appears.2Press the Navigation buttons to scroll to photo list option and press ENTER.3Press the Navigation buttons to scroll to one of the following options and press ENTER.Set Photo View.Option DescriptionSlide Speed Selects a slideshow speed (Fast, Medium, Slow).BGMSelects a music folder for the background music.yRepeatyRandomNOTEyYou cannot change the music folder while the background music is playing.Set Video.Allows you to change Video presets. (Refer to "PICTURE Settings" on p.61).Set Audio.Allows you to change Audio presets. (Refer to "AUDIO Settings" on p.65).
57ENGENGLISHENTERTAINMENTListening to music1Press Home to access the main menus.2Press the Navigation buttons to scroll to MYMEDIA and press ENTER.3Press the Navigation buttons to scroll to MusicList and press ENTER.4Select Drive1 to access the connected USB storage device.5Press the Navigation buttons to scroll to a folder/file you want and press ENTER.6Play music by using the following menus/buttons.0XVLF/LVW%PS00:00%PS00:00%PS00:00%PS00:00%PS00:00ᯒ0RYHᯙ3OD\᱇3DJH&KDQJH᱅0DUNᯕ7R0RYLH/LVW ᯕ&KDQJH1XPEHUV ᯕ0DUN0RGH ᰿([LW86%;7,&.3DJH3DJH'ULYH0XVLF/LVW%PS00:00%PS00:00%PS00:00%PS00:00%PS00:00ᯒ0RYHᯙ0DUN᱇3DJH&KDQJH᱅0DUNᯕ3OD\0DUNHG ᯕ0DUN$OO ᯕ8QPDUN$OO ᯕ([LW0DUN0RGH ᰿([LW86%;7,&.0DUN0RGH3DJH3DJH'ULYHButton DescriptionNavigationbutton Scrolls through the files.ENTER Plays the highlighted file or enters the mark mode.CH (^,v)Moves to the previous or next page.MARK Enters the mark mode.Menu DescriptionPlay Marked Plays the selected music file.Mark All Selects all files.Unmark All Clears all of your selections.Mark Mode Exits the Mark Mode.NOTEy: Abnormal files are displayed using this graphic.y: Non-supported files are displayed using this graphic.7Control playback by using the following buttons.Button DescriptionᰧStops playback.ᰦPlays a music file.ᰨPauses or resumes playback.ᰪSkips to the previous file.ᰩSkips to the next file.Play with Photo Displays photos during playback.ᰚ(ENERGYSAVING)Increases or deceases the brightness of your screen.Option Shows the Option menu (See p.58).HideHides the option window. To display the options, press ENTER.Exit Moves to the previous menu screen.
58ENGENGLISHENTERTAINMENTQ.MENU options for music list1Press Q. MENU.A pop-up window will appears.2Press the Navigation buttons to scroll to music list option and press ENTER.3Press the Navigation buttons to scroll to one of the following options and press ENTER.NOTEyOption values changed in Movie List does not affect the Photo List and Music List.yOption value changed in Photo List and Music List are changed likewise in Photo List and Music List.Set Audio Play.Select Repeat or Random option.Set Audio.Allows you to change Audio presets. (Refer to "AUDIO Settings" on p.65).NOTEyThe TV will not play copy protected files.yIf the TV is not in use for some time during playback, the information box as a screensaver will appear to prevent image burn.To return to the Music list screen, press ENTER or BACK.%PSᰦTime elapsed /DurationFile name
59ENGENGLISHCUSTOMIZING SETTINGSCUSTOMIZING TV SETTINGSThe Main Menus1Press Home to access the main menus.2Press the Navigation buttons to scroll to one of the following menus and press ENTER.3Press the Navigation buttons to scroll to the setting or option you want and press ENTER.4When you are finished, press EXIT.&+$11(/ 3,&785( $8',2 7,0(/2&. 237,21 ,1387 0<0(',$CHANNEL (See p.60)Sets up and edit channels.PICTURE (See p.61)Adjusts the image size, quality, or effect.AUDIO (See p.65)Adjusts the sound quality, effect, or volume level.TIME (See p.66)Sets the time, date, or Timer feature.MY MEDIA (See p.48)INPUT (See p.41)Views the input sources with their labels.LOCK (See p.67)Locks or unlocks channels and programs.OPTION (See p.69)Customizesthe general settings.
60ENGENGLISHCUSTOMIZING SETTINGSCustomizing SettingsCHANNEL Settings1Press Home to access the main menus.2Press the Navigation buttons to scroll to CHANNEL and press ENTER.3Press the Navigation buttons to scroll to the setting or option you want and press ENTER.- To return to the previous level, press BACK.4When you are finished, press EXIT.The available channel settings are described in the following.Setting DescriptionAuto Tuning Tunes and stores all available channels through antennas or cable inputs (See p.36).Manual Tuning Tunes and stores the channels you want manually (See p.36).Channel Edit Adds or deletes channels on the channel (See p.37).&+$11(/ ᯒ0RYHᯙ(QWHUؒ $XWR7XQLQJؒ 0DQXDO7XQLQJؒ &KDQQHO(GLW
61ENGENGLISHCUSTOMIZING SETTINGSPICTURE Settings1Press Home to access the main menus.2Press the Navigation buttons to scroll to CHANNEL and press ENTER.3Press the Navigation buttons to scroll to the setting or option you want and press ENTER.- To return to the previous level, press BACK.4When you are finished, press EXIT.The available picture settings are described in the following.Setting DescriptionAspect Ratio Changes the image size to view images at its optimal size (See p.40).Picture Wizard Adjusts the image quality and calibrates the screen.The customized options will be saved as Expert1 in the Picture Mode.NOTEyIf you use Picture Wizard, the Energy saving feature will turn off automatically.yTo reset changes made by Picture Wizard, operate Picture Reset when Picture Mode is on Expert1.Energy Saving Reduces the power consumption by adjusting the screen brightness.NOTEyWhen selecting Auto or Maximum,Backlight will not work.OptionAuto ( LCD ) The backlight is adjusted automatically corresponding to the surroundings when selecting Auto using the Intelligent sensor feature.Intelligent sensor (Plasma )The most suitable picture is automatically adjusted according to the surrounding conditions.Off Energy Saving is not used.Minimum/Medium/MaximumSelects the brightness level.Screen off The screen turns off in 3 seconds.3,&785( ᯒ0RYHᯙ(QWHUؒ $VSHFW5DWLR ؒ 3LFWXUH:L]DUGؒ ᰚ(QHUJ\6DYLQJ 2IIؒ 3LFWXUH0RGH 6WDQGDUG  ؒ%DFNOLJKW   ؒ&RQWUDVW   ؒ%ULJKWQHVV   ؒ6KDUSQHVV   ؒ&RORU   ؒ7LQW   ؒ&RORU7HPS   ؒ$GYDQFHG&RQWURO  ؒ3LFWXUH5HVHWؒ 7UX0RWLRQ /RZؒ 6FUHHQ5*%3&R*:&
62ENGENGLISHCUSTOMIZING SETTINGSSetting DescriptionPicture Mode Selects one of the preset image or customizes options in each mode for the best TV screen performance. You are also able to customize advanced options of each mode.The available preset picture modes vary depending on the TV.ModeIntelligent Sensor(LCD )Sets the TV to adjust the image settings, such as contrast, brightness, sharpness, color, or tint, automatically corresponding to the surrounding environments.Vivid Adjusts the video image for the retail environment by enhancing the contrast, brightness, color, and sharpness.Standard Adjusts the image for the normal environment.APS ( Plasma ) Maximizes video image reducing power consumption without hurting picture quality.Cinema Optimizes the video image for a cinematic look to enjoy movies as if you are in a movie theater.Sport Optimizes video images for high and dynamic actions by emphasizing primary colors such as white, grass, or sky blue.Game Optimizes the video image for a fast gaming screen such as PCs or games.Expert Adjusts the detailed video image settings for video experts as well as general viewers.NOTEyIf you select Intelligent Senesor, the option of the Energy saving feature will switch to Autoautomatically ( LCD ).TruMotion(Depending on model)Advance video technology that provides clearer, smoother images, even during fast action scenes creating a more stable structure for a crisper picture.TruMotion works with all inputs except PC mode.If you enable “TruMotion”, noise may appear on the screen. If this occurs, set “TruMotion” to “Off”.If you select "Picture Mode-Game", set "TruMotion" to "Off".OptionHigh Provides smoother picture movement.Low Provides smooth picture movement. Use this setting for standard use.Off Turn off TruMotion operation.UserDe-JudderAdjusts noise of the screen.De-Blur Adjusts after-image of the screen.SCREEN (RGB-PC)Customizes the PC display options.OptionResolution Selects a proper resolution when your PC uses 1024 X 768, 1280 X 768, or 1360 X 768 resolution.Auto Configure Sets the TV to optimize the options automatically for the TV display.Position Locates the image at the proper position.Size Adjusts the image size.Phase Eliminates horizontal streaking.Reset Restores the options to the default setting.
63ENGENGLISHCUSTOMIZING SETTINGSBasic Image OptionsSetting DescriptionBacklight ( LCD ) Adjusts the brightness of the screen by controlling the LCD backlight. If you decrease the brightness level, the screen becomes darker and the power consumption will be reduced without any video signal loss.NOTEyIf you use the “Energy saving - Off,Minimum,Medium”, Backlight will be available.Contrast Increases or decreases the amplitude of the video signal. You may use Contrast when the bright part of the picture is saturated.Brightness Adjusts the base level of the signal in the picture. You may use Brightness when the dark part of the picture is saturated.Sharpness Adjusts the level of crispness in the edges between the light and dark areas of the picture. The lower the level, the softer the image.Color Adjusts intensity of all colors. Tint Adjusts the balance between red and green levels.Color Temp. Sets to warm to enhance hotter colors such as red, or set to cool to enhance cooler colors such as blue.Advanced Control Customizes the advanced options.Picture Reset Restores the options of each mode to the factory default.Advanced Image Options (Depending on model)Setting DescriptionDynamic Contrast Adjusts the contrast to keep it at the best level according to the brightness of the screen. The picture is improved by making bright parts brighter and dark parts darker.Dynamic Color Adjusts screen colors so that they look livelier, richer and clearer. This feature enhances hue, saturation and luminance so that red, blue and green white look more vivid.Skin Color It detects the skin area of video and adjusts it to express a natural skin color.Noise Reduction Reduces screen noise without compromising video quality.Digital Noise Reduction Removes noise caused by compressing video.Gamma You can adjust brightness of dark area and middle gray level area of the picture.»Low: Make the dark and middle gray level areas brighter.»Medium: Express the original picture level.»High: Make the dark and middle gray level area darker.Black Level Sets black level of the screen to proper level. This function is available in the following modes: AV (NTSC-M), HDMI, Component or USB.»Low: The reflection of the screen gets darker.»High: The reflection of the screen gets brighter.Clear White Makes the white area of screen brighter and more white.Eye Care Adjusts the brightness of the screen to prevent the screen from being too bright. Dims extremely bright pictures. This feature is disabled in “Picture Mode - Standard, Sport, Game”.Real Cinema or Film ModeMakes video clips recorded in film look more natural by eliminating judder effect.DVD and Blu-ray movies are filmed at 24 frames per second (fps). With LG Real Cinema, every frame is consistently processed 5 times in 1/24 of a second producing 120 fps with TruMotion or 2 times in 1/24 of a second producing 48 fps without TruMotion, thus totally eliminating the judder effect.This function can also work when TruMotion is off.
64ENGENGLISHCUSTOMIZING SETTINGSSetting DescriptionColor Gamut Advanced ControlMaximizess the utilization of color to increase color quality.»Standard: Displays standard set of colors.»Wide: Increase number of colors used.Expert ControlDisplays color domain of the signal.»Standard: Displays standard set of colors.»Wide: Increase number of colors used.»EBU: Mode to display EBU standard color area. ( LCD )»SMPTE: Mode to display SMPTE standard color area. ( LCD )»BT709: Mode to display BT709 standard color area. ( LCD )Edge Enhancer Shows clearer and distinctive yet natural edges of the video.xvYCC This is produces richer colors.This feature represents rich colors as much as a conventional video signal.This function is enabled in “Picture mode - Cinema, Expert” when xvYCC signal is inputted through HDMI.Color Filter This is the function to filter the specific colors of the video.You can use the RGB filter to set color saturation and hue accurately.Expert Pattern This is the pattern used for expert adjustment.This function is enabled in “Picture Mode - Expert” when you watch DTV.Color Temperature Adjusts the overall color of the screen by changing the white baseline.Plasmaa. Gamma : Select Low, Medium, Highb. Method : 2 PointsyPattern: Inner, OuteryRed/Green/Blue Contrast, Red/Green/BlueBrightnessd. Apply to all inputsc. Method : 20 Point IREy IRE (Institute of Radio Engineers) is the unit to display the size of the video signal and can be set among 0, 5, 10, 15 - 100 Plasma TV. You can adjust Red, Green or Blue according to each setting.yRed/Green/Blue: The adjustment range is -50 - +50.LCDc. Method : 10 Point IREyPattern: Inner, Outery IRE (Institute of Radio Engineers) is the unit to display the size of the video signal and can be set among 0, 10, 20, 30 - 100. You can adjust Red, Green or Blue according to each setting.y Luminance: This function displays calculated luminance value for 2.2 gamma. You can input luminance value you want at 100 IRE, than the target luminance value for 2.2 gamma is displayed at every 10 steps from 10 IRE to 90 IRE.yRed/Green/Blue: The adjustment range is -50 - +50.Color Management SystemAs the tool used by the experts to make adjustments by using the test patterns, this does not affect other colors but can be used to selectively adjust the 6 color areas (Red/Green/Blue/Cyan/Magenta/Yellow).Color difference may not be distinctive even when you make the adjustments for the general video.Adjusts Red/Green/Blue/Yellow/Cyan/Magenta.Red/Green/Blue/Yellow/Cyan/Magenta Color: The adjustment range is -30 - +30.Red/Green/Blue/Yellow/Cyan/Magenta Tint: The adjustment range is -30 - +30.This feature is disable in RGB-PC and HDMI-PC mode.
65ENGENGLISHCUSTOMIZING SETTINGSAUDIO Settings1Press Home to access the main menus.2Press the Navigation buttons to scroll to AUDIO and press ENTER.3Press the Navigation buttons to scroll to the setting or option you want and press ENTER.- To return to the previous level, press BACK.4When you are finished, press EXIT.The available audio settings are described in the following.Setting DescriptionAuto Volume Activates the Auto Volume feature to keep the volume level consistent whenever you change channels. The volume level may not be consistent due to different signal conditions of broadcasting stations.Clear Voice II Sets whether to enhance human voice clarity. You can adjust the level of clarity when you set this feature on.NOTEyIf the Clear voice II feature is on, Infinite Surround will not be activated.Balance Adjusts balance between the left and right speakers according to your room environment.Sound Mode Selects one of the preset sound modes or customizes options in each mode.ModeStandard Select when you want standard-quality sound.Music Select when you listen to music.Cinema Select when you watch movies.Sport Select when you watch sports events.Game Select when you play games.NOTEyIf sound quality or volume is not at the level you want, it is recommended to use a separate home theater system or amplifier to cope with different user environments.yIf the Clear Voice II feature is on, Infinite Surround will not be activated.OptionInfinite Surround Infinite Surround is a patented LG proprietary sound processing technology that strives immersive 5.1 surround sound with just two front speakers.Treble Controls the dominant sounds in the output. When you turn up the treble, it will increase the output to the higher frequency range.Bass Controls the softer sounds in the output. When you turn up the bass, it will increase the output to the lower frequency range.Reset Resets the sound mode to the default setting.TV Speaker Turns on the internal speaker of the TV when using an external Hi-Fi system. You can use the TV speaker as an audio output device even if there is no video input.$8',2 ᯒ0RYHᯙ(QWHUؒ $XWR9ROXPH 2IIؒ &OHDU9RLFH,, 2IIᰕؒ %DODQFH ؒ 6RXQG0RGH 6WDQGDUG  ؒ,QILQLWH6XUURXQG2II  ؒ7UHEOH  ؒ%DVV  ؒ5HVHWؒ 796SHDNHU 2Q/R
66ENGENGLISHCUSTOMIZING SETTINGSTIME Settings1Press Home to access the main menus.2Press the Navigation buttons to scroll to TIME and press ENTER.3Press the Navigation buttons to scroll to the setting or option you want and press ENTER.- To return to the previous level, press BACK.4When you are finished, press EXIT.The available time settings are described in the followingSetting DescriptionClock Sets the time, date, time zone, and daylight-saving time feature.The time will be set automatically according to a digital channel signal which includes time information provided by the broadcasting station. If not, set the time and date manually.Off Time/On Time Sets the time to turn on or off the TV automatically. To use this function, you should set the current time and date in advance.NOTEyIf you do not press any button within 2 hours after the TV turns on by the On Time feature, the TV enters the Standby mode automatically.yIf you set both Off time and On time features to the same time, the Off time feature overrides the On time feature. Sleep Timer Sets the length of time until the TV to turns off. When you turn the TV off and turn it on again, the Sleep timer faature will be set to off..7,0( ᯒ0RYHᯙ(QWHUؒ &ORFNؒ 2II7LPH 2IIؒ 2Q7,PH 2IIؒ 6OHHS7LPHU 2II
67ENGENGLISHCUSTOMIZING SETTINGSLOCK Settings1Press Home to access the main menus.2Press the Navigation buttons to scroll to LOCK and press ENTER.3Press the Navigation buttons to scroll to the setting or option you want and press ENTER.- To return to the previous level, press BACK.4When you are finished, press EXIT.The available lock settings are described in the following.Setting DescriptionLock System Activates or deactivates the lock system.Set Password Changes the 4-digit password. The default PIN is “0 0 0 0”.If you forget your password, press “0-3-2-5” on the remote control.Block Channel Blocks the channels that contain inappropriate contents for children by pressing the Yellow button. The Lock icon appears in front of the blocked channels. The channels can be selected but the screen blank and the audio is muted.To watch a locked channel, enter the password.Movie Rating Blocks the movies that are only broadcasted on the TV and contain inappropriate contents, based on the Motion Picture Association of America (MPAA) rating.RatingG General audiences – All ages admittedPG Parental guidance suggested – Some material may not be suitable for childrenPG-13 Patents strongly cautioned – Some material may be inappropriate for children under 13R Restricted – Under 17 requires accompanying parent or adult guardianNC-17 No one 17 and under admittedX Adults onlyBlocking Off Permits all programsTV Rating-Children(Depending on model)Blocks the children’s TV programs that parents do not want their children to watch. To block other TV programs, you should set the TV Rating-General feature.RatingAge TV-Y (All children, including children from ages 2-6) TV-Y7 (Directed to older children, suitable for children age 6 and above)Fantasy Violence TY-Y7 (Directed to older children – Fantasy violence, suitable for children age 6 and above, containing more intense or combative fantasy violence)/2&. ᯒ0RYHᯙ(QWHUؒ 6HW3DVVZRUGؒ /RFN6\VWHP 2Q  ؒ%ORFN&KDQQHO  ؒ0RYLH5DWLQJ  ؒ795DWLQJ&KLOGUHQ  ؒ795DWLQJ*HQHUDO  ؒ'RZQORDGDEOH5DWLQJ  ؒ,QSXW%ORFNؒ .H\/RFN 2II
68ENGENGLISHCUSTOMIZING SETTINGSSetting DescriptionTV Rating-General(Depending on model)Blocks the TV programs that you want based on the ratings by using the Parental Control Function (V-Chip).NOTEyThe V-Chip electronically reads TV program ratings and allows parents to block program that are unsuitable for children.RatingAge TV-G (General audience, suitable for all ages)TV-PG (Parental guidance suggested, containing material that are unsuitable for younger children)TV-14 (Parents strongly cautioned, containing material that are unsuitable for children age 14 and under)TV-MA (Mature audience only, unsuitable for children age under 17)Dialog(suggestivedialogue)TV-PG or TV-14Language(coarse language)TV-PG, TV-14, or TV-MASex(sexual situation)TV-PG, TV-14, or TV-MAViolence TV-PG, TV-14, or TV-MATV Rating-English(Depending on model)Selecting Canadian English rating system.RatingE ExemptC ChildrenC8+ Children eight years and olderG General programming, suitable for all audiencesPG Parental Guidance14+ Viewers 14 years and older18+ Adult programmingBlocking Off Permits all programsTV Rating-French(Depending on model)Selecting Canadian French rating system.RatingE ExemptG General8ans+ General-Not convenient for little children13ans+ Not convenient for children of 13 years and younger16ans+ Not convenient for children of 16 years and younger18ans+ This programs is only for adultsBlocking Off Permits all programsDownloadableRatingThis function operates only when TV has received Region5 Rating data.The name of the rating option may differ.NOTEyThis feature is available only for digital channels.Input Block Blocks the input sources.Key Lock Locks or unlocks the buttons on the TV.
69ENGENGLISHCUSTOMIZING SETTINGSOPTION Settings1Press Home to access the main menus.2Press the Navigation buttons to scroll to OPTION and press ENTER.3Press the Navigation buttons to scroll to the setting or option you want and press ENTER.- To return to the previous level, press BACK.4When you are finished, press EXIT.The available general settings are described in the following.Setting DescriptionLanguage Selects a desired language.OptionMenu Language Selects a language for the display text.Audio Language Selects an audio language for your program. This feature operates only in the DTV or CADTV mode.Caption Sets whether to display captions and customize your option in each mode.ModeCC 1-4 (Closed Captioning)Displays the audio portion of a TV program as text on the TV screen. CC1 is the most common mode in use.- Field 1 data channels: two Captions (CC1, CC2) and two Text (T1, T2).- Field 2 data channels: two Captions (CC3, CC4) and two Text (T1, T2).Text 1-4Service 1-6 This is only available for the digital broadcasting system.Option (For DTV, CADTV)Size Selects the word size.Font Selects a typeface for the text.Text Color Selects a color for the text.Text Opacity Adjusts the opacity for the text color.Bg Color Selects a background color.Bg Opacity Adjusts the opacity for the background color.Edge Type Selects an edge type.Edge Color Selects a color for the edges.Power Indicator (LED LCD TV)Sets to turn on or off the indicator light on the TV.OptionStandby Light Sets to turn on or off the indicator light in Standby mode.Power Light Sets to turn on or off the indicator light when you turn on the power.237,21 ᯒ0RYHᯙ(QWHUؒ /DQJXDJHؒ &DSWLRQ 2IIؒ ,600HWKRG 1RUPDOؒ 3RZHU,QGLFDWRUؒ ,QLWLDO6HWWLQJؒ 6HW,' ؒ 0RGH6HWWLQJ +RPH8VH
70ENGENGLISHCUSTOMIZING SETTINGSSetting DescriptionISM Method (Plasma)Prevents image sticking or removes a ghost image.A frozen still picture displayed on the screen for prolonged periods can result in a ghost image.ModeNormal Sets it if image sticking is never a problem.Orbiter Avoids a ghost image on the screen.The image will move every 2 minutes to help prevent ghost images. However, it is best not to allow any fixed image to remain on the screen.Color Wash Removes a ghost image on the screen.The color block with the screen moved a little and the white pattern are alternately displayed. It is difficult to see the after image on all colors.Once it has been corrected it will not be visible in any color.White Wash Removes a ghost image on the screen.Use sparingly. Watch the TV normally for a while before using this feature to see if the ghost image disappears on its own.NOTEyAn excessive ghosted image may be impossible to clear entirely with White Wash. To return to normal viewing, press the any button.Initial Setting Resets the TV to factory default and erases all stored channels.Customizes the TV settings to suit your preference. The initial setup screen will appear when you turn on the TV for the first time.When selecting Yes, the TV turns off automatically and starts factory reset.NOTEyWhen selecting “Lock System - On”in the LOCK menu, the message to enter the password appears.yIf you forget your password, press “0-3-2-5” on the remote control.SettingLanguage Selects a desired language.Mode Setting Selects Home Use for the home environment.Selects Store Demo for the retail environment.Selects Demo Mode to set to show special features of the TV. You can cancel the demo mode by pressing any buttons except the Volume and Mute buttons.NOTEyWhen selecting Store Demo, Demo Mode will be activated.Power Indicator(LED LCD TV)Turns the power indicator light on or off.Time Zone Sets the time zone and daylight saving.Auto Tuning Scans and saves available channels automatically.Set ID Adds an ID to the connected devices.Mode Setting Default selection is “Home Use”. We recommend setting the TV to “Home Use” mode for the best picture in your home environment.OptionHome Use Selects it for the home environment.Store Demo Selects it for the retail environment.Demo Mode Sets to show special features of the TV. You can cancel the demo mode by pressing any buttons except the Volume and Mute buttons.
71ENGENGLISHMAKING CONNECTIONSMAKING CONNECTIONSConnect various external devices to the TV and switch input modes to select an external device. For more information of external device’s connection, refer to the manual provided with each device.Available external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, camcorders or cameras, gaming devices, and other external devices.NOTEyIf you record a TV program on a DVD recorder or VCR, make sure to connect the TV signal input cable to the TV through a DVD recorder or VCR. For more information of recording, refer to the manual provided with the connected device.yThe external device connection may differ from the model.yConnect external devices to the TV regardless of the order of the TV port.Connect external devices to the TV by referring to the following table.Connection type Video AudioDigital Analog Digital AnalogHDMI (highly recommended) O - O -DVI O - - OComponent - O - OComposite - O - ORGB - O - OOptical audio - - O -
72ENGENGLISHMAKING CONNECTIONSConnection OverviewConnect various external devices to the ports on the TV back panel.1Find an external device you want to connect to your TV as shown on the following illustration.2Check the connection type of the external device.3Go to the appropriate illustration and check the connection details.NOTEyIf you connect a gaming device to the TV, use the cable supplied with the gaming device.yRefer to the external equipment’s manual for operating instructions.HDMI – See p.73DVI – See p.73Component – See p.74Composite – See p.74Digital – See p.77RGB – See p.76Memory storage – See p.77Memory card reader – See p.77HD Receiver DVD VCRSpeaker USBPC Camcorder/Camera Gaming device
73ENGENGLISHMAKING CONNECTIONSyThis part of MAKING CONNECTIONS mainly uses picture for PW350, LV3500 series.Connecting to a HD receiver, DVD, or VCR playerConnect a HD receiver, DVD, or VCR player to the TV and select an appropriate input mode.HDMI ConnectionTransmits the digital video and audio signals from an external device to the TV. Connect the external device and the TV with the HDMI cable as shown in the following illustration.NOTEyUse a High Speed HDMI™ Cable (v.1.3, HDMI™ CEC Support).yUse the latest High Speed HDMI™ Cable with CEC (Customer Electronics Control) function.PW350 seriesCOMPONENT INVIDEOAUDIOYLPBPRRRGB IN (PC)AUDIOIN(RGB/DVI)ANTENNA/CABLEINRS-232C IN(CONTROL & SERVICE)REMOTECONTROLINOPTICALDIGITALAUDIO OUTAV IN11/DVIINVIDEOAUDIOL/MONOOORRR212HDMILV3500 seriesIN3USBINLANOPTICAL DIGITALAUDIO OUTPTICAL DIGITTICAL DIGITANTENNA/CABLE INANTENNAANTENNAH/PANTENNA/CABLE INRS-232C IN(CONTROL & SERVICE)RGB IN(PC)(RGB/DVI)AUDIO INOPTICALDIGITALAUDIOOUT12VIDEOAUDIOCOMPONENT INYPBPRRLVIDEOAUDIORRAV IN1/ DVI IN21L/MONOAV IN 2VIDEO/AUDIOHDMIDVI to HDMI ConnectionTransmits the digital video signal from an external device to the TV. Connect the external device and the TV with the DVI-HDMI cable as shown in the following illustration. To transmit an audio signal, connect an optional audio cable.PW350 seriesCOMPONENT INVIDEOAUDIOYLPBPRRRGB IN (PC)AUDIOIN(RGB/DVI)ANTENNA/CABLEINRS-232C IN(CONTROL & SERVICE)REMOTECONTROLINOPTICALDIGITALAUDIOOUTAV IN11/DVIINVIDEOAUDIOL/MONOOORRR212AUDIO IN(RGB/DVI)AUDIO OUTDVI OUTLV3500 seriesIN3USBINLANOPTICAL DIGITALAUDIO OUTPTICAL DIGITTICAL DIGITH/PANTENNA/CABLE INRS-232CIN(CONTROL &SERVICE)RGB IN(PC)(RGB/DVI)AUDIO INOPTICALDIGITALAUDIOOUT12VIDEOAUDIOCOMPONENT INYPBPRRLVIDEOAUDIORRAV IN1/ DVI IN2 1L/MONOAV IN2VIDEO/AUDIOAUDIO OUTDVI OUT(RGB/DVI)AUDIO IN
74ENGENGLISHMAKING CONNECTIONSComponent ConnectionTransmits the analog video and audio signals from an external device to the TV. Connect the external device and the TV with the component cable as shown in the following illustration.PW350 seriesCOMPONENT INVIDEOAUDIOYLPBPRRRGB IN (PC)AUDIOIN(RGB/DVI)ANTENNA/CABLEINRS-232C IN(CONTROL & SERVICE)REMOTECONTROLINOPTICALDIGITALAUDIOOUTAV IN11/DVIINVIDEOAUDIOL/MONOOORRR212YLPBPRRVIDEOAUDIOLRLV3500 seriesIN3USBINLANOPTICAL DIGITALAUDIO OUTPTICAL DIGITTICAL DIGITANTENNA/CABLE INANTENNAANTENNAH/PANTENNA/CABLE INRS-232CIN(CONTROL &SERVICE)RGB IN(PC)(RGB/DVI)AUDIOINOPTICALDIGITALAUDIOOUT12VIDEOAUDIOCOMPONENT INYPBPRRLVIDEOAUDIORAV IN 1/ DVI IN21L/MONOAV IN 2VIDEO/AUDIOVIDEOAUDIOLRYPBPRRLNOTEyIf cables are installed incorrectly, it could case the image to display in black and white or with distorted color. Check to ensure the cable are matched with the corresponding color connection.Composite ConnectionTransmits the analog video and audio signals from an external device to the TV. Connect the external device and the TV with the composite cable as shown in the following illustration.PW350 seriesCOMPONENT INVIDEOAUDIOYLPBPRRRGB IN (PC)AUDIOIN(RGB/DVI)ANTENNA/CABLEINRS-232C IN(CONTROL & SERVICE)REMOTECONTROLINOPTICALDIGITALAUDIOOUTAV IN11/DVIINVIDEOAUDIOL/MONOOORRR212AV IN 1VIDEOAUDIOL/MONORMONO( )AUDIOLRVIDEOLV3500 seriesIN3USBINLANOPTICAL DIGITALAUDIO OUTPTICAL DIGITTICAL DIGITANTENNA/CABLE INANTENNAANTENNAH/PANTENNA/CABLE INRS-232C IN(CONTROL &SERVICE)RGB IN(PC)(RGB/DVI)AUDIO INOPTICALDIGITALAUDIO OUT12VIDEOAUDIOCOMPONENT INYPBPRRLVIDEOAUDIOL(MONO)RRAV IN1/ DVI IN21L/MONOAV IN2VIDEO / AUDIOLANVIDEOAUDIORAV IN 1AUDIO VIDEOMONO( )LR(For only LV3500 series)IN 3USBINH/PANTENNA/CABLE INRS-232C IN(CONTROL & SERVICE)RGB IN(PC)(RGB/DVI)AUDIOINOPTICALDIGITALAUDIOOUT12VIDEOAUDIOCOMPONENT INYPBPRRLVIDEOAUDIOL(MONO)RRAV IN1/ DVI IN21L(MONO)L/MONOL(MONO)L(MONO)AV IN 2VIDEO / AUDIOVIDEO AUDIO RL (MONO)AV IN 2VIDEO / AUDIO
75ENGENGLISHMAKING CONNECTIONSConnecting to a PCThis TV set supports the Plug & Play* feature.* Plug & Play: The function when a PC recognizes a connected device that users connect to a PC and turn on, without device configuration or user intervention.Connect the TV according to your PC by referring to the following table.HDMI(highly recommended) RGBVideo O (Digital) O (Analog)Audio O (Digital) XNOTEyIt is recommended to use the TV set with the HDMI connection for the best image quality.HDMI ConnectionTransmits the digital video and audio signals from your PC to the TV. Connect the PC and the TV with the HDMI cable as shown in the following illustration.PW350 seriesCOMPONENT INVIDEOAUDIOYLPBPRRRGB IN (PC)AUDIOIN(RGB/DVI)ANTENNA/CABLEINRS-232C IN(CONTROL & SERVICE)REMOTECONTROLINOPTICALDIGITALAUDIOOUTAV IN 11/DVIINVIDEOAUDIOL/MONOOORRR212HDMILV3500 seriesIN3USBINLANOPTICAL DIGITALAUDIO OUTPTICAL DIGITTICAL DIGITANTENNA/CABLE INANTENNAANTENNAH/PANTENNA/CABLE INRS-232C IN(CONTROL & SERVICE)RGB IN(PC)(RGB/DVI)AUDIO INOPTICALDIGITALAUDIOOUT12VIDEOAUDIOCOMPONENT INYPBPRRLVIDEOAUDIORRAV IN1/ DVI IN21L/MONOAV IN 2VIDEO/AUDIOHDMIDVI to HDMI ConnectionTransmits the digital video signal from your PC to the TV. Connect the PC and the TV with the DVI-HDMI cable as shown in the following illustration. To transmit an audio signal, connect an audio cable.PW350 seriesCOMPONENT INVIDEOAUDIOYLPBPRRRGB IN (PC)AUDIOIN(RGB/DVI)ANTENNA/CABLEINRS-232C IN(CONTROL & SERVICE)REMOTECONTROLINOPTICALDIGITALAUDIOOUTAV IN11/DVIINVIDEOAUDIOL/MONOOORRR212AUDIO IN(RGB/DVI)AUDIO OUTDVI OUTLV3500 seriesIN3USBINLANOPTICAL DIGITALAUDIO OUTPTICAL DIGITTICAL DIGITH/PANTENNA/CABLE INRS-232CIN(CONTROL &SERVICE)RGB IN(PC)(RGB/DVI)AUDIO INOPTICALDIGITALAUDIOOUT12VIDEOAUDIOCOMPONENT INYPBPRRLVIDEOAUDIORRAV IN1/ DVI IN2 1L/MONOAV IN2VIDEO/AUDIOAUDIO OUTDVI OUT(RGB/DVI)AUDIO IN
76ENGENGLISHMAKING CONNECTIONSRGB ConnectionTransmits the analog video signal from your PC to the TV. Connect the PC and the TV with the supplied D-sub 15 pin signal cable as shown in the following illustrations. To transmit an audio signal, connect an optional audio cable.PW350 seriesCOMPONENT INVIDEOAUDIOYLPBPRRRGB IN (PC)AUDIOIN(RGB/DVI)ANTENNA/CABLEINRS-232C IN(CONTROL & SERVICE)REMOTECONTROLINOPTICALDIGITALAUDIO OUTAV IN11/DVIINVIDEOAUDIOL/MONOOORRR212RGB IN (PC)AUDIO IN(RGB/DVI)RGB OUT (PC)AUDIO OUTLV3500 seriesIN3USBINOPTICAL DIGITALAUDIO OUTPTICAL DIGITTICAL DIGITANTENNA/CABLE INANTENNAANTENNAH/PANTENNA/CABLE INRS-232CIN(CONTROL &SERVICE)RGB IN(PC)(RGB/DVI)AUDIO INOPTICALDIGITALAUDIO OUT12VIDEOAUDIOCOMPONENT INYPBPRRLVIDEOAUDIORRAV IN1/ DVI IN2 1L/MONOAV IN 2VIDEO / AUDIORGB OUT (PC)AUDIO OUTRGB IN(PC)(RGB/DVI)AUDIO INNOTEyTo get the the best picture quality, adjust the PC graphics card to 1024 x 768 (Other models) or 1920 x 1080 (50/60PZ200, 22LV2500, 32/37/42/47/55LV3500, 32/42LK430, 32/37/42/47LK450, 42/47/55LK520).yDepending on the graphics card, DOS mode may not work if a HDMI to DVI Cable is in use.yIn PC mode, there may be noise associated with the resolution, vertical pattern, contrast or brightness.yIf noise is present, change the PC output to another resolution, change the refresh rate to another rate or adjust the brightness and contrast on the PICTURE menu until the picture is clear.yAvoid keeping a fixed image on the screen for a long period of time. The fixed image may become permanently imprinted on the screen.yThe synchronization input form for Horizontal and Vertical frequencies is separate.yDepending on the graphics card, some resolution settings may not allow the image to be positioned on the screen properly.yWhen selecting HDMI-PC, set the “Input Label - PC” in the OPTION menu.
77ENGENGLISHMAKING CONNECTIONSConnecting to a USBConnect a USB storage device such as s USB flash memory, external hard drive, MP3 player or a USB memory card reader to the TV and access the My media menu to use various multimedia files. See "Connecting USB storage devices" on p.48 and see "Browsing files" on p.76.orUSB ININ3USB INConnecting to a Headphone (LCD)Listen to the sound through a headphone.IN3H/PANTENNA/CABLE IN1NTINAV IN 2VIDEO / AUDIOH/PNOTEyAUDIO menu options are disabled when connecting a headphone.yWhen changing AV MODE with a headphone connected, the change is applied to video but not to audio.yOptical Digital Audio Out is not available when connecting a headphone.yHeadphone impedance: 16 :yMax audio output: 10 mW to 15 mWyHeadphone jack size: 0.32 cm (1/8 inch) Connecting to an Audio SystemUse an optional external audio system instead of the built-in speaker.NOTEyIf you use an optional external audio device instead of the built-in speaker, set the TV speaker feature to off (See p.65).Digital optical audio connectionTransmits the digital audio signal from the TV to an external device. Connect the external device and the TV with the optical audio cable as shown in the following illustration.PW350 seriesCOMPONENT INVIDEOAUDIOYLPBPRRRGB IN (PC)AUDIOIN(RGB/DVI)ANTENNA/CABLEINRS-232C IN(CONTROL & SERVICE)REMOTECONTROLINOPTICALDIGITALAUDIOOUTAV IN11/DVIINVIDEOAUDIOL/MONOOORRR212OPTICAL DIGITALAUDIO OUT OPTICAL AUDIO INLV3500 seriesIN3USBINH/PANTENNA/CABLE INRS-232C IN(CONTROL & SERVICE)OPTICALDIGITALAUDIO OUTRGB IN(PC)(RGB/DVI)AUDIOIN12VIDEOAUDIOCOMPONENT INYPBPRRLVIDEOAUDIORRAV IN1/ DVI IN21L/MONOAV IN2VIDEO / AUDIOOPTICAL AUDIO INOPTICALDIGITALAUDIO OUT
78ENGENGLISHMAKING CONNECTIONSSIMPLINK ConnectionUse the TV remote control to play and control the AV device connected with the HDMI cable through HDMI-CEC. Your TV only works with the devices that support HDMI-CEC.Connect one end of the HDMI cable to the HDMI/DVI IN or HDMI IN terminal on the rear of the TV and the other end to the SIMPLINK device. NOTEyIf the connected device does not support HDMI-CEC, the SIMPLINK feature is unavailable.yTo operate SIMPLINK, you should use an High Speed HDMI cable with the CEC (Consumer Electronics Control) function. Activating and Using the SIMPLINK menus 1Press SIMPINK to access the SIMPLINK menus.2Press the Navigation buttons to scroll to On.3Press the Navigation buttons to scroll to one of the devices and press ENTER.ᯙ(QWHUᰙ([LW܁2Q۽:DWFK79܁۽܁۽+''5HFRUGHU܁۽',6&+'''9'59&5+'+76SHDNHU796SHDNHU12345No. Description1Displays the previously viewed TV channel.2Plays discs. When multiple discs are available, the title of the disc appears at the bottom of the screen.3Controls the connected VCR.4HDD recordings playback: Controls the recording stored in HDD.5Audio out to home theater speaker or Audio out to TV: Changes the audio output between Home theater speaker and TV speaker.- A check mark appears in front of the selected device.- Available devices display in a bright color.- Unavailable devices display in grey.4Control the selected AV device.- Direct Play: After connecting AV devices to the TV, you can directly control the devices and play media without additional settings.- Select AV device: Enables you to select one of the AV devices connected to the TV.- Disc playback: Control connected AV devices by pressing the Navigation buttons, ENTER,ᰦ,ᰧ,ᰨ,ᰪ and ᰩ.- Power off all devices: When you power off the TV, all connected devices are turned off.- Switch audio-out: Offers an easy way to switch audio-out.- Sync Power on: When the equipment with SIMPLINK function connected HDMI terminal starts to play, The TV will automatically turn on.NOTEyIf you change the input source by pressing INPUT, the progressing function of the SIMPLINK device will stop.yIf you select a device that has the home theater feature, the sound output automatically switches to the home theater speaker and the TV speaker turns off.yIf a connected SIMPLINK home theater system does not play the audio from the TV, connect the DIGITAL AUDIO OUT terminal on the rear of the TV to the DIGITAL AUDIO IN terminal on the back of the SIMPLINK device with an optical cable.
79ENGENGLISHMAINTENANCEMAINTENANCEUpdate and clean your TV regularly to keep the best performance and to extend the product lifespan.Cleaning Your TVCAUTIONyMake sure to turn the power off and disconnect the power cord and all other cables first.yWhen the TV is left unattended and unused for a long time, disconnect the power cord from the wall outlet to prevent possible damage from lightning or power surges.Screen and frameTo remove dust or light dirt, wipe the surface with a dry, clean, and soft cloth.To remove major dirt, wipe the surface with a soft cloth dampened in clean water or a diluted mild detergent. Then wipe immediately with a dry cloth.CAUTIONyDo not push, rub, or hit the surface with your fingernail or a sharp object, as this may result in scratches on the screen and image distortions.yDo not use any chemicals, such as waxes, benzene, alcohol, thinners, insecticides, air fresheners, lubricants, as these may as these may damage the screen’s finish and cause discolorations.Cabinet and standTo remove dust or light dirt, wipe the cabinet with a dry, clean, and soft cloth.To remove major dirt, wipe the cabinet with a soft cloth dampened in a clean water or water containing a small amount of mild detergent. Then wipe immediately with a dry cloth.CAUTIONyDo not spray liquid onto the surface. If water enters the TV, it may result in fire, electric shock, or malfunction.yDo not use any chemicals as this may deteriorate the surface.Power cordRemove the accumulated dust or dirt on the power cord regularly. Preventing “Image burn” or “Burn-in” on your TV screenyIf a fixed image displays on the TV screen for a long period of time, it will be imprinted and become a permanent disfigurement on the screen. This is “image burn” or “burn-in” and not covered by the warranty.yIf the aspect ratio of the TV is set to 4:3 for a long period of time, image burn may occur on the letterboxed area of the screen.yAvoid displaying a fixed image on the TV screen for a long period of time (2 or more hours for LCD, 1 or more hours for the Plasma TV) to prevent image burn.
80ENGENGLISHTROUBLESHOOTINGTROUBLESHOOTINGGeneralProblem ResolutionCannot control the TV with the remote control.yCheck the remote control sensor on the product and try again.yCheck if there is any obstacle between the product and the remote control.yCheck if the batteries are still working and properly installed ( to , to ).yCheck if the appropriate input mode such as TV or VCR is set for using the remote control.No image display and no sound is produced.yCheck if the product is turned on.yCheck if the power cord is connected to a wall outlet.yCheck if there is a problem in the wall outlet by connecting other products.Image appears slowly when the TV turns on.yThe image is muted during the product startup process. This is normal. If the image does not appear in a few minutes, unplug the TV for 30 seconds and try again. If the image still does not appear, contact the authorized service center in your local area.Cannot connect external devices. ySee "Connection Overview" on p.72 and connect an external device.The TV turns off suddenly. yCheck the power control settings. The power supply may be interrupted.yCheck if the Auto sleep feature is activated in the Time settings. See "Sleep Timer" on p.66.yIf there is no signal while the TV is on, the TV will turn off automatically after 15 minutes of inactivity.AudioProblem ResolutionNo sound is produced while images are displaying.yPress VOL + or - button.yCheck if the sound is muted by pressing MUTE.yScroll to other channels. There may a problem with the broadcast.yCheck if the audio cables are connected properly.One of the speakers produce noises or does not produce sound.yA change in ambient humidity or temperature may result in an unusual noise when the product turns on or off.yThere is no problem with your product.
81ENGENGLISHTROUBLESHOOTINGVideoProblem ResolutionAn image displays in black and white or the color quality is poor.yAdjust the color setting in the Picture menu (See p.61).yKeep a sufficient distance between this product and other electronic products.yScroll to other channels. There may a problem with the broadcast.Horizontal or vertical bars appears or images bluryCheck if there are local interferences such as an electrical appliance or power tool.Lines or streaks appear on images yCheck the antenna or aim the antenna to the proper direction.Afterimages (ghosts) appear when the product turns offyPixels may have been damaged from a fixed image displayed for a long time (image burn). Use a screen saver to prevent the pixel damage on the screen.The power is on but the screen appears extremely dark.yAdjust the brightness and contrast in the Picture menu (See p.61).“No Signal” appears on the screen. yCheck if the signal cable is connected between the TV and products properly.yCheck the selected input source by pressing INPUT.Black spots appear on the screen. ySeveral pixels in red, green, white, or black may appear on the screen that can attribute to the characteristics of the LCD panel. yThis is normal.The display offset is wrong. yAdjust the position setting in the Picture menu (See p.61).yCheck if the video card resolution and frequency are supported by the product. If the frequency is out of range, set to the recommended resolution using the display settings on the external device.Thin lines appear in the background of the screen.yCheck the video cable connections.Horizontal noises appear or characters blur.yAdjust the Phase setting in the Picture menu.See "SCREEN (RGB-PC)" on p.62.The reception on some channels is pooryScroll to other channels. There may a problem with the broadcast.yThe station signal may be weak. Aim the antenna to the proper direction.yCheck if there are local interferences such as an electrical appliance or power tool.
82ENGENGLISHSPECIFICATIONSSPECIFICATIONSMODELS42PW340(42PW340-UB)50PW340(50PW340-UB)42PW350(42PW350-UE)50PW350(50PW350-UE)42PW350U(42PW350U-UC)50PW350U(50PW350U-UC)42PW350R(42PW350R-UA)50PW350R(50PW350R-UA)Dimensions(W x H x D)With stand991.8 mm x 667.0 mm x 230.5 mm(39.0 inch x 26.2 inch x 9.0 inch)1176.1 mm x 774.7 mm x 289.8 mm(46.3inch x 30.5 inch x 11.4 inch)Without stand 991.8mm x 613.8 mm x 52.5 mm(39.0 inch x 24.1 inch x 2.0 inch)1176.1 mm x 716.5 mm x 52.5 mm(46.3 inch x 28.2 inch x 2.0 inch)Weight With stand 21.5 kg (47.3 lbs) 29.6 kg (65.2 lbs)Without stand 20.0 kg (44.0 lbs) 27.3 kg (60.1 lbs)Current Value / Power consumption 2.3 A / 230 W 3.0 A / 300 WPower requirement AC100 - 240 V - 50/60 HzTelevision System NTSC-M, ATSC, 64 & 256 QAMProgram Coverage VHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV 1-135External Antenna Impedance 75 ΩEnvironmentconditionOperatingTemperature0 - 40 °COperating Humidity Less than 80 %Storage Temperature -20 - 60 °CStorage Humidity Less than 85 %MODELS 50PZ200(50PZ200-UA)60PZ200(60PZ200-UA)Dimensions(W x H x D)With stand1171.9 mm x 770.9 mm x 289.8 mm(46.1 inch x 30.3 inch x 11.4 inch)1390.8 mm x 905.2 mm x 334.7 mm(54.7 inch x 35.6 inch x 13.1 inch)Without stand1171.9 mm x 712.2 mm x 52.5 mm(46.1 inch x 28.0 inch x 2.0 inch)1390.8 mm x 835.5 mm x 52.5 mm(54.7 inch x 32.8 inch x 2.0 inch)Weight With stand 29.8 kg (65.6 lbs) 42.6 kg (93.9 lbs)Without stand 27.5 kg (60.6 lbs) 38.5 kg (84.8 lbs)Product specifications may be changed without prior notice due to upgrade of product functions.
83ENGENGLISHSPECIFICATIONSMODELS 19LV2500(19LV2500-UA)22LV2500(22LV2500-UA)Dimensions(W x H x D)With stand455.2 mm x 355.0 mm x 145.0 mm(17.9 inch x 13.9 inch x 5.7 inch)471.2 mm x 365.9 mm x 155.4 mm(18.5 inch x 14.4 inch x 6.1 inch)Without stand 455.2 mm x 313.1 mm x 40.9 mm(17.9 inch x 12.3 inch x 1.6 inch)471.2 mm x 315.5 mm x 34.4 mm(18.5 inch x 12.4 inch x 1.3 inch)Weight With stand 2.7 kg (5.9 lbs) 3.4 kg (7.4 lbs)Without stand 2.5 kg (5.5 lbs) 3.2 kg (7.0 lbs)MODELS 26LV2500(26LV2500-UA)32LV2500(32LV2500-UA)Dimensions(W x H x D)With stand635.6 mm x 475.0 mm x 169.0 mm(25.0 inch x 18.7 inch x 6.6 inch)777.4 mm x 551.3 mm x 234.0 mm(30.6 inch x 21.7 inch x 9.2 inch)Without stand 635.6 mm x 413.5 mm x 40.9 mm(25.0 inch x 16.2 inch x 1.6 inch)777.4 mm x 501.3 mm x 35.4 mm(30.6 inch x 19.7 inch x 1.3 inch)Weight With stand 5.4 kg (11.9 lbs) 11.9 kg (26.2 lbs)Without stand 5.0 kg (11.0 lbs) 10.7 kg (23.5 lbs)MODELS 32LV3500(32LV3500-UA)37LV3500(37LV3500-UA)Dimensions(W x H x D)With stand764.1 mm x 544.7 mm x 240.0 mm(30.0 inch x 21.4 inch x 9.4 inch)763.1 mm x 545.3 mm x 240.0 mm(30.0 inch x 21.4 inch x 9.4 inch)Without stand 764.1 mm x 483.6 mm x 35.4 mm(30.0 inch x 19.0 inch x 1.5 inch)763.1 mm x 483.1 mm x 40.4 mm(30.0 inch x 19.0 inch x 1.5 inch)Weight With stand 11.2 kg (24.6 lbs) 13.1 kg (28.8 lbs)Without stand 9.4 kg (20.7 lbs) 11.3 kg (24.9 lbs)MODELS 42LV3500(42LV3500-UA)47LV3500(47LV3500-UA)Dimensions(W x H x D)With stand997.2 mm x 684.2 mm x 256.6 mm(39.2 inch x 26.9 inch x 10.1 inch)1107.0 mm x 745.5 mm x 256.3 mm(43.5 inch x 29.3 inch x 10.0 inch)Without stand997.2 mm x 614.7 mm x 40.1 mm(39.2 inch x 24.2 inch x 1.5 inch)1107.0 mm x 676.5 mm x 40.1 mm (43.5 inch x 26.6 inch x 1.5 inch)Weight With stand 15.5 kg (34.1 lbs) 20.9 kg (46.0 lbs)Without stand 13.3 kg (29.3 lbs) 18.7 kg (41.2 lbs)MODELS 55LV3500(55LV3500-UA)Dimensions(W x H x D)With stand 1285.9 mm x 847.3 mm x 338.0 mm(50.6 inch x 33.3 inch x 13.3 inch)Without stand 1285.9 mm x 777.8 mm x 40.1 mm(50.6 inch x 30.6 inch x 1.5 inch)Weight With stand 25.5 kg (56.2 lbs)Without stand 21.4 kg (47.1 lbs)
84ENGENGLISHSPECIFICATIONSMODELS 32LK430(32LK430-UA)42LK430(42LK430-UA)Dimensions(W x H x D)With stand799.0 mm x 555.0 mm x 207.0 mm(31.4 inch x 21.8 inch x 8.1 inch)1023.0 mm x 685.0 mm x 261.0 mm(40.2 inch x 26.9 inch x 10.2 inch)Without stand 799.0 mm x 506.0 mm x 73.5 mm(31.4 inch x 19.9 inch x 2.8 inch)1023.0 mm x 635.0 mm x 76.6 mm(40.2 inch x 25.0 inch x 3.0 inch)Weight With stand 9.1 kg (20.0 lbs) 15.1 kg (33.2 lbs)Without stand 8.1 kg (17.8 lbs) 13.5 kg (29.7 lbs)MODELS 32LK450(32LK450-UB)37LK450(37LK450-UB)Dimensions(W x H x D)With stand795.0 mm x 568.0 mm x 207.0 mm(31.2 inch x 22.3 inch x 8.1 inch)913.0 mm x 639.0 mm x 265.0 mm(35.9 inch x 25.1 inch x 10.4 inch)Without stand 795.0 mm x 504.0 mm x 73.5 mm(31.2 inch x 19.8 inch x 2.8 inch)913.0 mm x 571.0 mm x 77.4 mm(35.9 inch x 22.4 inch x 3.0 inch)Weight With stand 9.2 kg (20.2 lbs) 12.8 kg (28.2 lbs)Without stand 8.1 kg (17.8 lbs) 11.1 kg (24.4 lbs)MODELS 22LK330(22LK330-UA)26LK330(26LK330-UA)Dimensions(W x H x D)With stand526.0 mm x 377.0 mm x 164.9 mm(20.7 inch x 14.8 inch x 6.4 inch)663.0 mm x 484.0 mm x 206.8 mm(26.1 inch x 19.0 inch x 8.1 inch)Without stand526.0 mm x 331.0 mm x 65.0 mm(20.7 inch x 13.0 inch x 2.5 inch)663.0 mm x 423.0 mm x 79.9 mm(26.1 inch x 16.6 inch x 3.1 inch)Weight With stand 4.3 kg (9.4 lbs) 7.3 kg (16.0 lbs)Without stand 4.0 kg (8.8 lbs) 6.2 kg (13.6 lbs)MODELS 42LK450(42LK450-UB)47LK450(47LK450-UB)Dimensions(W x H x D)With stand1019.0 mm x 698.0 mm x 265.0 mm(40.1 inch x 27.4 inch x 10.4 inch)1132.0 mm x 762.0 mm x 265.0 mm(44.5 inch x 30.0 inch x 10.4 inch)Without stand1019.0 mm x 631.0 mm x 76.5 mm(40.1 inch x 24.8 inch x 3.0 inch)1132.0 mm x 695.0 mm x 76.5 mm(44.5 inch x 27.3 inch x 3.0 inch)Weight With stand 15.1 kg (33.2 lbs) 19.0 kg (41.8 lbs)Without stand 13.4 kg (29.5 lbs) 17.3 kg (38.1 lbs)MODELS 32LK330(32LK330-UA)Dimensions(W x H x D)With stand 805.0 mm x 583.0 mm x 224.0 mm(31.6 inch x 22.9 inch x 8.8 inch)Without stand 805.0 mm x 528.0 mm x 79.9 mm(31.6 inch x 20.7 inch x 3.1 inch)Weight With stand 10.8 kg (23.8 lbs)Without stand 9.7 kg (21.3 lbs)
85ENGENGLISHSPECIFICATIONSMODELS 42LK520(42LK520-UA)47LK520(47LK520-UA)Dimensions(W x H x D)With stand1019.0 mm x 698.0 mm x 265.0 mm(40.1 inch x 27.4 inch x 10.4 inch)1137.0 mm x 758.0 x 270.0 mm(44.7 inch x 29.8 inch x 10.6 inch)Without stand1019.0 mm x 631.0 mm x 76.5 mm(40.1 inch x 24.8 inch x 3.0 inch)1137.0 mm x 685.0 mm x 76.8 mm(44.7 inch x 26.9 inch x 3.0 inch)Weight With stand 15.1 kg (33.2 lbs) 20.3 kg (44.7 lbs)Without stand 13.4 kg (29.5 lbs) 18.3 kg (40.3 lbs)MODELS 55LK520(55LK520-UA)Dimensions(W x H x D)With stand 1329.0 mm x 872.0 mm x 330.0 mm(52.3 inch x 34.3 inch x 12.9 inch)Without stand 1329.0 mm x 796.0 mm x 96.5 mm(52.3 inch x 31.3 inch x 3.7 inch)Weight With stand 33.0 kg (72.7 lbs)Without stand 28.8 kg (63.4 lbs)
86ENGENGLISHSPECIFICATIONSRGB (PC), HDMI (PC) supported modeResolution HorizontalFrequency (KHz)VerticalFrequency (Hz)720x400 31.469 70.08640x480 31.469 59.94800x600 37.879 60.311024x768 48.363 60.001360x768 47.712 60.0151280x1024 63.981 60.021920x1080RGB-PC 66.587 59.9341920x1080HDMI-PC 67.5 60.00For 50/60PZ200, 22LV2500, 32/37/42/47/55LV3500, 32/42LK430, 32/37/42/47LK450, 42/47/55LK520HDMI (DTV) supported modeResolution HorizontalFrequency (KHz)VerticalFrequency (Hz)720x480p 31.4731.5059.9460.001280x720p 44.9645.0059.9460.001920x1080i 33.7233.7559.9460.001920x1080p26.9727.0033.7133.7567.43267.5023.97624.0029.9730.0059.9460.00Component port connecting informationComponent ports on theTV YPBPRVideo output portson DVD playerYPBPRY B-Y R-YYCbCrYPbPrComponent supported modeResolution HorizontalFrequency (KHz)VerticalFrequency (Hz)720x480i 15.7315.7359.9460.00720x480p 31.4731.5059.9460.001280x720p 44.9645.0059.9460.001920x1080i 33.7233.7559.9460.001920x1080p26.9727.0033.7133.7567.43267.5023.97624.0029.9730.0059.9460.00
87ENGENGLISHSPECIFICATIONSVideo Supported FormatsFileExtensionnameVideo Decoder Audio Codec Max Resolutionmpg, mpeg MPEG1, MPEG2 MP2, MP3, Dolby Digital, LPCM1920 x 1080 @ 30p(Only Motion JPEG640x480@30p)dat MPEG1 MP2ts, trp, tp MPEG2, H.264, AVS, VC1 MP2, MP3, Dolby Digital, AAC, HE-AACvob MPEG1, 2 MP2, MP3, Dolby Digital, LPCMmp4, movMPEG4,DivX 3.11, DivX 4.12, DivX 5.x, DivX 6, Xvid 1.00, Xvid 1.01, Xvid 1.02, Xvid 1.03, Xvid 1.10-beta1/2H.264AAC, HE-AAC, MP3mkv H.264, MPEG-1,2,4 MP2, MP3, Dolby Digital, AACHE-AAC, LPCMdivx, aviMPEG2, MPEG4, DivX 3.11, DivX 4, DivX 5, DivX 6, Xvid 1.00, Xvid 1.01, Xvid 1.02, Xvid 1.03, Xvid 1.10-beta1/2H.264MP2, MP3, Dolby Digital, LPCM,ADPCM, AAC, HE-AACMotion JPEG(avi, mp4, mkv) JPEG LPCM, ADPCMasf, wmv VC1 WMAflv Sorenson H.263, H264 MP3, AAC3D Supported FormatsSignal ResolutionHorizontalFrequency (kHz)VerticalFrequency(Hz)Playable 3D video formatHDMI Input720p 1280x720 44.96 / 45.0059.94 / 60.00Top & Bottom, Side by Side89.90 / 90.00 HDMI (V. 1.4 with HDMI 3D) Frame Packing1080i1920x108033.72 / 33.75 Top & Bottom, Side by Side1080p67.432 / 67.50 Top & Bottom, Side by Side, Checker BoardSingle Frame Sequential27.00 24.00 Top & Bottom, Side by Side, Checker Board53.95 / 54.00 23.98 / 24.00 HDMI (V. 1.4 with HDMI 3D) Frame Packing33.75 30.00 Top & Bottom, Side by SideChecker BoardUSB Input1080p 1920x1080 33.75 30.00 Top & Bottom, Side by SideChecker Board, MPO (Photo)Resolution Playable 3D video formatOther Resolution Top & Bottom, Side by SidePC Input(PZ200 series)1920 X 1080 66.587 59.93 Top & Bottom, Side by SideComponent(For Plasma TV)720p 1280x720 44.96 / 45.00 59.94 / 60.00Top & Bottom, Side by Side1080i 1920x1080 33.72 / 33.75 59.94 / 60.00Signal Playable 3D video formatDTV 720p, 1080i Top & Bottom, Side by Side
88ENGENGLISHIR CODESIR CODES(Depending on model)How to ConnectConnect your wired remote control to the Remote Control port on the TV.Remote Control IR CodesOutput waveformSingle pulse, modulated with 37.917kHz signal at 455kHzT1TcFrame configuration1st frameC0 C1 C2 C3 C4 C5 C6 C7 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 D0 D1 D2 D3 D4 D5 D6 D7 Lead code Low custom code High custom code Data code Data codeRepeat frameRepeat code TfLead code4.5 ms9 ms Repeat code2.25 ms 9 ms 0.55 msBit description0.56 ms1.12 ms0.56 ms2.24 msBit “0” Bit “1”Frame interval: TfThe waveform is transmitted as long as a key is depressed.Tf TfTf=108ms @455KHz
89ENGENGLISHIR CODESCode(Hexa) Function Note Code(Hexa) Function Note08 POWER Remote control Button (Power On/Off)0F TV Remote control ButtonDC 3D Remote control Button45Q.MENURemote control Button 5B EXIT Remote control Button43 Home Remote control Button D6 TV Discrete IR Code(TV Input Selection)0B INPUT Remote control Button10 - 19 Number Key 0-9 Remote control Button C4 POWER ON Discrete IR Code(Only Power On)4C - (Dash)/LIST Remote control Button1A FLASHBK Remote control Button C5 POWER OFF Discrete IR Code(Only Power Off)9 MUTE/DELETE Remote control Button2 VOL + Remote control Button 5A AV1 Discrete IR Code(AV1 Input Selection)3 VOL - Remote control Button0CH^Remote control Button D0 AV2 Discrete IR Code(AV2 Input Selection)1CHvRemote control Button1E FAV/MARK Remote control Button BF COMPONENT1 Discrete IR Code(Component1 Input Selection)40^Remote control Button41vRemote control Button D4 COMPONENT2 Discrete IR Code(Component2 Input Selection)7<Remote control Button6>Remote control Button D5 RGB-PC Discrete IR Code(RGB-PC Input Selection)44 ENTER Remote control Button28 BACK Remote control Button CE HDMI1 Discrete IR Code(HDMI1 Input Selection)79 RATIO Remote control ButtonBA ( Plasma)FREEZE Remote control Button CC HDMI2 Discrete IR Code(HDMI2 Input Selection)95ENERGY SAVINGRemote control Button7E SIMPLINK Remote control Button E9 HDMI3 Discrete IR Code(HDMI3 Input Selection)AA INFO Remote control Button30 AV MODE Remote control Button DA HDMI4 ( LCD)Discrete IR Code(HDMI4 Input Selection)72 RED Remote control Button71 GREEN Remote control Button 76 Ratio 4:3 Discrete IR Code(Only 4:3 Mode)63 YELLOW Remote control Button61 BLUE Remote control Button 77 Ratio 16:9 Discrete IR Code(Only 16:9 Mode)B1 nRemote control Button B0 XRemote control Button AF Ratio Zoom Discrete IR Code(Only Zoom Mode)BA yy Remote control Button8E XX Remote control Button8F WW Remote control Button
90ENGENGLISHEXTERNAL CONTROL DEVICE SETUPEXTERNAL CONTROL DEVICE SETUPRS-232C SetupConnect the RS-232C (serial port) input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally.Connect the serial port of the control device to the RS-232C jack on the product back panel.RS-232C IN(CONTROL & SERVICE)NOTEyRS-232C on this unit is intended to be used with third party RS-232C control hardware and software. The instructions below are provided to help with programming software or to test functionality using telenet software. RS-232C connection cables are not supplied with the product.Type of connector; D-Sub 9-Pin Male1569RS-232C IN(CONTROL & SERVICE)No. Pin name1 No connection2 RXD (Receive data)3 TXD (Transmit data)4 DTR (DTE side ready)5 GND6 DSR (DCE side ready)7 RTS (Ready to send)8 CTS (Clear to send)9 No Connection
91ENGENGLISHEXTERNAL CONTROL DEVICE SETUPRS-232C configurations7-Wire Configuration (Serial female-female NULL modem cable)PC TVRXD 23TXDTXD 32RXDGND 55GNDDTR 46DSRDSR 64DTRRTS 78CTSCTS 87RTSD-Sub 9 D-Sub 93-Wire Configurations(Not standard)PC TVRXD 23TXDTXD 32RXDGND 55GNDDTR 46DSRDSR 64DTRRTS 78CTSCTS 87RTSD-Sub 9 D-Sub 9Set IDSet ID number.237,21 ᯒ0RYHᯙ(QWHUᯐᯙؒ /DQJXDJHؒ &DSWLRQ 2IIؒ 3RZHU,QGLFDWRUؒ ,QLWLDO6HWWLQJؒ 6HW,' ؒ 0RGH6HWWLQJ +RPH8VH1Press Home to access the main menus.2Press the Navigation buttons to scroll to OPTION and press ENTER.3Press the Navigation buttons to scroll to Set IDand press ENTER.4Scroll left or right to select a set ID number and select CLOSE. The adjustment range is 1-99.5When you are finished, press EXIT.
92ENGENGLISHEXTERNAL CONTROL DEVICE SETUPCommunication ParametersyBaud rate: 9600 bps (UART)yData length: 8 bitsyParity : NoneyStop bit: 1 bityCommunication code: ASCII codeyUse a crossed (reverse) cable.Command reference listCOMMAND1 COMMAND2 DATA(Hexadecimal) COMMAND1 COMMAND2 DATA(Hexadecimal)01. Power k a 00 - 01 14. Treble k r 00 - 6402. Input Select x b (See p.94) 15. Bass k s 00 - 6403. Aspect Ratio k c (See p.94) 16. Balance k t 00 - 6404. Screen Mute k d 00 - 01 17. Color Temperature x u 00 - 6405. Volume Mute k e 00 - 01 18. ISM Method ( Plasma)j p (See p.95)06. Volume Control k f 00 - 64 19. Energy Saving j q (See p.95)07. Contrast k g 00 - 64 20. Auto Configuration j u (See p.95)08. Brightness k h 00 - 64 22. Channel Add/Del m b 00 - 0109. Color k i 00 - 64 23. Key m c (See p.96)10. Tint k j 00 - 64 24. Backlight (LCD)m g 00 - 6411. Sharpness k k 00 - 6412. OSD Select k l 00 - 0113. Remote ControlLock Modek m 00 - 01COMMAND1 COMMAND2DATA00(Hexadecimal)DATA01(Hexadecimal)DATA02(Hexadecimal)DATA03(Hexadecimal)DATA04(Hexadecimal)DATA05(Hexadecimal)21. Channel Tuning maphysicalprogramhighmajorprogramlowmajor low minor high minor low attribute
93ENGENGLISHEXTERNAL CONTROL DEVICE SETUPTransmission / Receiving protocolTransmission[Command1][Command2][ ][Set ID][ ][Data][Cr][Command 1] : First command to control the set.(j, k, m or x)[Command 2] : Second command to control the set.[Set ID] :You can adjust the set ID to choose desired set ID number in Option menu. Adjustment range is 1~ 99. When selecting Set ID ‘0’, every connected the set is controlled. Set ID is indicated as decimal (1~ 99) on menu and as Hexa decimal (0x0~ 0x63) on transmission /receiving protocol.[DATA] : To transmit the command data.Transmit the ‘FF’ data to read status of command.[Cr] : Carriage ReturnASCII code ‘0x0D’[ ] : ASCII code ‘space (0x20)’* In this model, set will not send the status during the standby mode.OK Acknowledgement[Command2][ ][Set ID][ ][OK][Data][x]The set transmits ACK (acknowledgement) based on this format when receiving normal data. At this time, if the data is data read mode, it indicates present status data. If the data is data write mode, it returns the data of the PC computer.* In this model, set will not send the status during the standby mode.* Data Format[Command 2] : Use as command.[Set ID] : Use the small character, if set ID is 10, it will send the ‘0’, ‘a’.[DATA] : Use the small character, if data is 0 x ab, it will send the ‘a’, ‘b’.[OK] : Use the large character.Error Acknowledgement[Command2][ ][Set ID][ ][NG][Data][x]The set transmits ACK (acknowledgement) based on this format when receiving abnormal data from non-viable functions or communication errors.Data1: Illegal CodeData2: Not supported functionData3: Wait more time* In this model, set will not send the status during the standby mode.* Data Format[Command 2] : Use as command.[Set ID] : Use the small character, if set ID is 10, it will send the ‘0’, ‘a’.[DATA] : Use the small character, if data is 0 x ab, it will send the ‘a’, ‘b’.[NG] : Use the large character
94ENGENGLISHEXTERNAL CONTROL DEVICE SETUP01. Power (Command: k a)To control Power On/Off of the set.Transmission [k][a][ ][Set ID][ ][Data][Cr]Data 00: Power Off Data 01: Power OnAcknowledgement [a][ ][Set ID][ ][OK/NG][Data][x]* In a like manner, if other functions transmit ‘FF’ data based on this format, Acknowledgement data feedback presents status about each function.* Note: In this model, set will send the Acknowledge after power on processing completion.There might be a time delay between command and acknowledge.02. Input Select (Command: x b)To select input source for set.Transmission [x][b][ ][Set ID][ ][Data][Cr]Data 00: DTV (Antenna) Data 01: DTV (Cable)Data 10: Analog (Antenna)Data 11: Analog (Cable)Data 20: AV or AV1 Data 21: AV2Data 40: Component or Component1Data 41: Component2 Data 60: RGB-PC Data 90: HDMI1Data 91: HDMI2 Data 92: HDMI3Data 93: HDMI4Acknowledgement [b][ ][Set ID][ ][OK/NG][Data][x]* Use the feature depending on your model.03. Aspect Ratio (Command: k c)To adjust the screen format.Transmission [k][c][ ][Set ID][ ][Data][Cr]Data 01: 4:3 Data: 09: Just scanData 02: 16:9 Data: 10: Cinema Zoom 1Data 04: Zoom…Data 06: Set by program Data 1F: Cinema Zoom16Acknowledgement [c][ ][Set ID][ ][OK/NG][Data][x]04. Screen Mute (Command: k d)To select screen mute on/off.Transmission [k][d][ ][Set ID][ ][Data][Cr]Data 00: Screen mute off (Picture on), Video-out Mute offData 01: Screen mute on (Picture off)Data 10: Video-out Mute onAcknowledgement [d][ ][Set ID][ ][OK/NG][Data][x]* In case of Video-out Mute on only, TV will display On Screen Display (OSD). But, in case of screen mute on, TV will not display On Screen Display (OSD).05. Volume Mute (Command: k e)To control volume mute on/off.You can also adjust mute using the MUTE button onremote control.Transmission [k][e][ ][Set ID][ ][Data][Cr]Data 00: Volume mute on (Volume off)Data 01: Volume mute off (Volume on)Acknowledgement [e][ ][Set ID][ ][OK/NG][Data][x]06. Volume Control (Command: k f)To adjust volume.You can also adjust volume with the volume buttons on remote control.Transmission [k][f][ ][Set ID][ ][Data][Cr]Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)*Refer to “Real data mapping”.Acknowledgement [f][ ][Set ID][ ][OK/NG][Data][x]07. Contrast (Command: k g)To adjust screen contrast.You can also adjust contrast in the PICTURE menu.Transmission [k][g][ ][Set ID][ ][Data][Cr]Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)*Refer to “Real data mapping”.Acknowledgement [g][ ][Set ID][ ][OK/NG][Data][x]08. Brightness (Command: k h)To adjust screen brightness.You can also adjust brightness in the PICTURE menu.Transmission [k][h][ ][Set ID][ ][Data][Cr]Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)*Refer to “Real data mapping”.Acknowledgement [h][ ][Set ID][ ][OK/NG][Data][x]09. Color (Command: k i)To adjust screen color.You can also adjust color in the PICTURE menu.Transmission [k][i][ ][Set ID][ ][Data][Cr]Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)*Refer to “Real data mapping”.Acknowledgement [i][ ][Set ID][ ][OK/NG][Data][x]10. Tint (Command: k j)To adjust screen tint.You can also adjust tint in the PICTURE menu.Transmission [k][j][ ][Set ID][ ][Data][Cr]Data Red: 00 ~ Green: 64 (*transmit by Hexadecimal code)*Refer to “Real data mapping”.Acknowledgement [ j ][ ][Set ID][ ][OK/NG][Data][x]11. Sharpness (Command: k k)To adjust screen sharpness.You can also adjust sharpness in the PICTURE menu.Transmission [k][k][ ][Set ID][ ][Data][Cr]Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)*Refer to “Real data mapping”.Acknowledgement [k][ ][Set ID][ ][OK/NG][Data][x]
95ENGENGLISHEXTERNAL CONTROL DEVICE SETUP12. OSD Select (Command: k l)To select OSD (On Screen Display) on/off.Transmission [k][l][ ][Set ID][ ][Data][Cr]Data 00: OSD off Data 01: OSD onAcknowledgement [l][ ][Set ID][ ][OK/NG][Data][x]13. Remote Control Lock Mode (Command: k m)To lock the remote control and the front panel controls on the set.Transmission [k][m][ ][Set ID][ ][Data][Cr]Data 00: Lock off Data 01: Lock onAcknowledgement [m][ ][Set ID][ ][OK/NG][Data][x]If you’re not using the remote control and front panelcontrols on the Monitor set, use this mode. When main power is on/off, remote control lock is released.If Key Lock is on in the standby mode, TV will not turn on by POWER button of remote control and on the TV.14. Treble (Command: k r)To adjust treble.You can also adjust treble in the AUDIO menu.Transmission [k][r][ ][Set ID][ ][Data][Cr]Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)*Refer to “Real data mapping”.Acknowledgement [r][ ][Set ID][ ][OK/NG][Data][x]15. Bass (Command: k s)To adjust bass.You can also adjust bass in the AUDIO menu.Transmission [k][s][ ][Set ID][ ][Data][Cr]Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)*Refer to “Real data mapping”.Acknowledgement [s][ ][Set ID][ ][OK/NG][Data][x]16. Balance (Command: k t)To adjust balance.You can also adjust balance in the AUDIO menu.Transmission [k][t][ ][Set ID][ ][Data][Cr]Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)*Refer to “Real data mapping”.Acknowledgement [t][ ][Set ID][ ][OK/NG][Data][x]17. Color Temperature (Command: x u)To adjust color temperature.You can also adjust color temperature in the PICTURE menu.Transmission [x][u][ ][Set ID][ ][Data][Cr]Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)*Refer to “Real data mapping”. Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x]18. ISM Method (Command: j p) (Plasma)To avoid having a fixed image remain on screen.Transmission [j][p][ ][Set ID][ ][Data][Cr]Data 02: Orbiter 04: White Wash 08: Normal 20: Color WashAcknowledgement [p][ ][Set ID][ ][OK/NG][Data][x]19. Energy Saving (Command: j q)To control the energy saving function.Transmission [ j ][q][ ][Set ID][ ][Data][Cr]Data 00: off 01: Minimum 02: Medium 03: Maximum 04: Auto/Intelligent sensor (depending on model) 05: Screen offAcknowledgement [q][ ][Set ID][ ][OK/NG][Data][x]20. Auto Configuration (Command: j u)To adjust picture position and minimize image shaking automatically. Auto configuration only works in RGB-PC mode.Transmission [ j ][u][ ][Set ID][ ][Data][Cr]Data 01: To setAcknowledgement [u][ ][Set ID][ ][OK/NG][Data][x]21. Channel Tuning (Command: m a)To tune channel to following physical/major/minor number.Transmission [m][a][ ][Set ID][ ][Data00][ ][Data01][ ][Data02][ ][Data03][ ][Data04][ ][Data05][Cr]Digital channels have a Physical, Major, and Minor channel number. The Physical number is the actual digital channel number, the Major is the number that the channel should be mapped to, and the Minor is the sub-channel. Since the ATSC tuner automatically maps the channel to the Major number, the Physical number is not required when sending a command.Data 00: Physical Channel NumberNTSC air: 02~45, NTSC cable: 01, 0E~7DATSC air: 01~45, ATSC cable: 01~87Data 01 & 02: Major Channel NumberData 01: High byte Data 02: Low byteTwo bytes are available for the Major and Minor, normally only the second byte is used.Data 03 & 04: Minor Channel NumberNot needed for NTSC.The table above lists the binary code which must be converted to Hexadecimal before sending. For example:
96ENGENGLISHEXTERNAL CONTROL DEVICE SETUPThe binary code to tune the sub source to an NTSC cable channel is “1000 0001”, which translates to “81” in Hex.* 7th bit : For which source do you want to change the channel.* 6th bit: Use a two part or one part channel. Most cases just use 0 since it’s ignored when using NTSC.* 5th bit: Use 0 with NTSC since it can only use the physical channel number. Normally use 1 for ATSC since most times it doesn’t matter what the physical number is. * 4th bit: Set to 0.* 3-0 bits: Choose signal type.* Tune Command Examples:1. Tune to the analog (NTSC) cable channel 35.Data 00 = Physical of 35 = 23Data 01 & 02 = No Major = 00 00Data 03 & 04 = No Minor = 00 00Data 05 = 0000 0001 in binary = 01Total = ma 00 23 00 00 00 00 012. Tune to the digital (ATSC) local channel 30-3.Data 00 = Don’t know Physical = 00Data 01 & 02 = Major is 30 = 00 1EData 03 & 04 = Minor is 3 = 00 03Data 05 = 0010 0010 in binary = 22Total = ma 00 00 00 1E 00 03 2222. Channel Add/Del (Command: m b)To add and delete the channels.Transmission [m][b][ ][Set ID][ ][Data][Cr]Data 00: Channel Delete Data 01: Channel AddAcknowledgement [b][ ][Set ID][ ][OK/NG][Data][x]23. Key (Command: m c)To send IR remote key code.Transmission [m][c][ ][Set ID][ ][Data][Cr]Acknowledgement [c][ ][Set ID][ ][OK/NG][Data][x]When TV is in the standby mode, TV will turn on by POWER button of remote control only.24. Backlight (Command: m g) ( LCD )To adjust screen backlight.Transmission [m][g][ ][Set ID][ ][Data][Cr]Data Min:00 ~ Max:64 (*transmit by Hexadecimal code)*Refer to “Real data mapping”.Acknowledgement [g][ ][Set ID][ ][OK/NG][Data][x]7Main/SubPicture 6Two/OnePartChannel5UsingPhysicalChannel4Reserved 3210 Step0 Main 0 Two 0 Use x 0 0 0 0 NTSC Air1 Sub 1 One 1 No Use x 0 0 0 1 NTSC Cablex 0 0 1 0 ATSC Airx 0 0 1 1 ATSC Cable_stdx 0 1 0 0 ATSC Cable_hrcx 0 1 0 1 ATSC Cable_ircx 0 1 1 0 ATSC cable_autox 0 1 1 1 Reservedx xxxx...x 1 1 1 1 Reserved
97ENGENGLISHOPEN SOURCE LICENSEOPEN SOURCE LICENSEOpen source software noticePlease be informed that LG Electronics products may contain open source software listed in the tables below.License ComponentOpenSSL license - opensslMIT license - libcurl- ncurses expat license - expatFreetype license - freetypeJPEG license - libjpegZlib/libpng license - libmng- libpng- md5 checksum- tinyxml- zlibX.net license - libicuBSD license - strace- xySSLRSA data security license - MD5LG Electronics products may also contain open source software listed as Components in the table below, and you may download the complete source code thereof free of charge, from LG Electronics website (http://opensource.lge.com) for a period of three (3) years from our last shipment of this product. Please be informed that the open source software is subject to the terms and conditions of the applicable open source licenses, which are provided to you hereinbelow.License ComponentGNU GPL v2.0 - Linux kernel 2.6- busybox- e2fsprogs- gdbserver- jfsutils- mtd-utils- procps - u-boot- udhcpcGNU LGPL v2.1 - directFB- gconv- glibc MPL 1.1 - nanox
98ENGENGLISHOPEN SOURCE LICENSEPreambleThe licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change free software--to make sure the software is free for all its users. This General Public License applies to most of the Free Software Foundation’s software and to any other program whose authors commit to using it. (Some other Free Software Foundation software is covered by the GNU Lesser General Public License instead.) You can apply it to your programs, too.When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs; and that you know you can do these things.To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to sur-render the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the software, or if you modify it.For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights that you have. You must make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights.We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal permission to copy, distribute and/or modify the software.Also, for each author’s protection and ours, we want to make certain that everyone understands that there is no war-ranty for this free software. If the software is modified by someone else and passed on, we want its recipients to know that what they have is not the original, so that any problems introduced by others will not reflect on the original authors’ reputations.Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors of a free program will individually obtain patent licenses, in effect making the program proprietary. To prevent this, we have made it clear that any patent must be licensed for everyone’s free use or not licensed at all.The precise terms and conditions for copying, distribution and modification follow.TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License. The “Program”, below, refers to any such program or work, and a “work based on the Program” means either the Program or any derivative work under copyright law: that is to say, a work containing the Program or a portion of it, either verbatim or with modifications and/or translated into another language. (Hereinafter, translation is included without limitation in the term “modification”.) Each licensee is addressed as “you”.Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running the Program is not restricted, and the output from the Program is covered only if its contents consti-tute a work based on the Program (independent of having been made by running the Program). Whether that is true depends on what the Program does.GNU GENERAL PUBLIC LICENSEVersion 2, June 1991Copyright (C) 1989, 1991 Free Software Foundation, Inc.51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USAEveryone is permitted to copy and distribute verbatim copiesof this license document, but changing it is not allowed.
99ENGENGLISHOPEN SOURCE LICENSE1. You may copy and distribute verbatim copies of the Program’s source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of war-ranty; keep intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program.You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee.2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions:a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change.b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program or any part thereof, to be licensed as a whole at no charge to all third parties under the terms of this License.c) If the modified program normally reads commands interactively when run, you must cause it, when started running for such interactive use in the most ordinary way, to print or display an announcement including an appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty) and that users may redistribute the program under these conditions, and telling the user how to view a copy of this License. (Exception: if the Program itself is interactive but does not normally print such an announcement, your work based on the Program is not required to print an announcement.)These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Program, the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it.Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Program.In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this License.3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you also do one of the following:a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or,b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your cost of physically performing source distribution, a complete machine-readable copy of the corresponding source code, to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or,c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This alterna-tive is allowed only for noncommercial distribution and only if you received the program in object code or executable form with such an offer, in accord with Subsection b above.)
100ENGENGLISHOPEN SOURCE LICENSEThe source code for a work means the preferred form of the work for making modifications to it. For an executable work, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the executable. However, as a special exception, the source code distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable.If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place counts as distribution of the source code, even though third parties are not compelled to copy the source along with the object code.4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance.5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Program or works based on it.6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients’ exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties to this License.7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Program at all. For example, if a patent license would not permit royalty-free redistribution of the Program by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Program.If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances.It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system, which is implemented by public license practices. Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice.This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted inter-faces, the original copyright holder who places the Program under this License may add an explicit geographical distribu-tion limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License.9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns.Each version is given a distinguishing version number. If the Program specifies a version number of this License which
101ENGENGLISHOPEN SOURCE LICENSEapplies to it and “any later version”, you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Program does not specify a version number of this License, you may choose any version ever published by the Free Software Foundation.10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally.NO WARRANTY11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.END OF TERMS AND CONDITIONSGNU Lesser General Public LicenseVersion 2.1, February 1999Copyright (C) 1991, 1999 Free Software Foundation, Inc. 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.[This is the first released version of the Lesser GPL. It also counts as the successor of the GNU Library Public License, version 2, hence the version number 2.1.]PreambleThe licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public Licenses are intended to guarantee your freedom to share and change free software--to make sure the software is free for all its users. This license, the Lesser General Public License, applies to some specially designated software packages--typically libraries--of the Free Software Foundation and other authors who decide to use it. You can use it too, but we suggest you first think carefully about whether this license or the ordinary General Public License is the better strategy to use in any particular case, based on the explanations below. When we speak of free software, we are referring to freedom of use, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish); that you receive source code or can get it if you want it; that you can change the software and use pieces of it in new free programs; and that you are informed that you can do these things.To protect your rights, we need to make restrictions that forbid distributors to deny you these rights or to ask you to
102ENGENGLISHOPEN SOURCE LICENSEsurrender these rights. These restrictions translate to certain responsibilities for you if you distribute copies of the library or if you modify it. For example, if you distribute copies of the library, whether gratis or for a fee, you must give the recipients all the rights that we gave you. You must make sure that they, too, receive or can get the source code. If you link other code with the library, you must provide complete object files to the recipients, so that they can relink them with the library after making changes to the library and recompiling it. And you must show them these terms so they know their rights. We protect your rights with a two-step method: (1) we copyright the library, and (2) we offer you this license, which gives you legal permission to copy, distribute and/or modify the library. To protect each distributor, we want to make it very clear that there is no warranty for the free library. Also, if the library is modified by someone else and passed on, the recipients should know that what they have is not the original version, so that the original author’s reputation will not be affected by problems that might be introduced by others. Finally, software patents pose a constant threat to the existence of any free program. We wish to make sure that a company cannot effectively restrict the users of a free program by obtaining a restrictive license from a patent holder. Therefore, we insist that any patent license obtained for a version of the library must be consistent with the full freedom of use specified in this license. Most GNU software, including some libraries, is covered by the ordinary GNU General Public License. This license, the GNU Lesser General Public License, applies to certain designated libraries, and is quite different from the ordinary General Public License. We use this license for certain libraries in order to permit linking those libraries into non-free programs.When a program is linked with a library, whether statically or using a shared library, the combination of the two is legally speaking a combined work, a derivative of the original library. The ordinary General Public License therefore permits such linking only if the entire combination fits its criteria of freedom. The Lesser General Public License permits more lax cri-teria for linking other code with the library. We call this license the “Lesser” General Public License because it does Less to protect the user’s freedom than the ordinary General Public License. It also provides other free software developers Less of an advantage over competing non-free programs. These disadvantages are the reason we use the ordinary General Public License for many libraries. However, the Lesser license provides advantages in certain special circumstances. For example, on rare occasions, there may be a special need to encourage the widest possible use of a certain library, so that it becomes a de-facto standard. To achieve this, non-free programs must be allowed to use the library. A more frequent case is that a free library does the same job as widely used non-free libraries. In this case, there is little to gain by limiting the free library to free software only, so we use the Lesser General Public License. In other cases, permission to use a particular library in non-free programs enables a greater number of people to use a large body of free software. For example, permission to use the GNU C Library in non-free programs enables many more people to use the whole GNU operating system, as well as its variant, the GNU/Linux operating system. Although the Lesser General Public License is Less protective of the users’ freedom, it does ensure that the user of a program that is linked with the Library has the freedom and the wherewithal to run that program using a modified version of the Library. The precise terms and conditions for copying, distribution and modification follow. Pay close attention to the difference between a “work based on the library” and a “work that uses the library”. The former contains code derived from the library, whereas the latter must be combined with the library in order to run. TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION0. This License Agreement applies to any software library or other program which contains a notice placed by the copy-right holder or other authorized party saying it may be distributed under the terms of this Lesser General Public License (also called “this License”). Each licensee is addressed as “you”.
103ENGENGLISHOPEN SOURCE LICENSEA “library” means a collection of software functions and/or data prepared so as to be conveniently linked with application programs (which use some of those functions and data) to form executables. The “Library”, below, refers to any such software library or work which has been distributed under these terms. A “work based on the Library” means either the Library or any derivative work under copyright law: that is to say, a work contain-ing the Library or a portion of it, either verbatim or with modifications and/or translated straightforwardly into another language. (Hereinafter, translation is included without limitation in the term “modification”.) “Source code” for a work means the preferred form of the work for making modifications to it. For a library, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the library.Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running a program using the Library is not restricted, and output from such a program is covered only if its contents constitute a work based on the Library (independent of the use of the Library in a tool for writing it). Whether that is true depends on what the Library does and what the program that uses the Library does. 1. You may copy and distribute verbatim copies of the Library’s complete source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and distribute a copy of this License along with the Library. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. 2. You may modify your copy or copies of the Library or any portion of it, thus forming a work based on the Library, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions: a) The modified work must itself be a software library. b) You must cause the files modified to carry prominent notices stating that you changed the files and the date of any change.c) You must cause the whole of the work to be licensed at no charge to all third parties under the terms of this License. d) If a facility in the modified Library refers to a function or a table of data to be supplied by an application program that uses the facility, other than as an argument passed when the facility is invoked, then you must make a good faith effort to ensure that, in the event an application does not supply such function or table, the facility still operates, and performs whatever part of its purpose remains meaningful. (For example, a function in a library to compute square roots has a purpose that is entirely well-defined independent of the application. Therefore, Subsection 2d requires that any application-supplied function or table used by this function must be optional: if the application does not supply it, the square root function must still compute square roots.) These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Library, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Library, the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regard-less of who wrote it. Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Library. In addition, mere aggregation of another work not based on the Library with the Library (or with a work based on the
104ENGENGLISHOPEN SOURCE LICENSELibrary) on a volume of a storage or distribution medium does not bring the other work under the scope of this License. 3. You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a given copy of the Library. To do this, you must alter all the notices that refer to this License, so that they refer to the ordinary GNU General Public License, version 2, instead of to this License. (If a newer version than version 2 of the ordinary GNU General Public License has appeared, then you can specify that version instead if you wish.) Do not make any other change in these notices. Once this change is made in a given copy, it is irreversible for that copy, so the ordinary GNU General Public License applies to all subsequent copies and derivative works made from that copy. This option is useful when you wish to copy part of the code of the Library into a program that is not a library. 4. You may copy and distribute the Library (or a portion or derivative of it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium cus-tomarily used for software interchange. If distribution of object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place satisfies the requirement to distribute the source code, even though third parties are not compelled to copy the source along with the object code.5. A program that contains no derivative of any portion of the Library, but is designed to work with the Library by being compiled or linked with it, is called a “work that uses the Library”. Such a work, in isolation, is not a derivative work of the Library, and therefore falls outside the scope of this License. However, linking a “work that uses the Library” with the Library creates an executable that is a derivative of the Library (because it contains portions of the Library), rather than a “work that uses the library”. The executable is therefore cov-ered by this License. Section 6 states terms for distribution of such executables. When a “work that uses the Library” uses material from a header file that is part of the Library, the object code for the work may be a derivative work of the Library even though the source code is not. Whether this is true is especially sig-nificant if the work can be linked without the Library, or if the work is itself a library. The threshold for this to be true is not precisely defined by law. If such an object file uses only numerical parameters, data structure layouts and accessors, and small macros and small inline functions (ten lines or less in length), then the use of the object file is unrestricted, regardless of whether it is legally a derivative work. (Executables containing this object code plus portions of the Library will still fall under Section 6.)Otherwise, if the work is a derivative of the Library, you may distribute the object code for the work under the terms of Section 6. Any executables containing that work also fall under Section 6, whether or not they are linked directly with the Library itself. 6. As an exception to the Sections above, you may also combine or link a “work that uses the Library” with the Library to produce a work containing portions of the Library, and distribute that work under terms of your choice, provided that the terms permit modification of the work for the customer’s own use and reverse engineering for debugging such modifications.You must give prominent notice with each copy of the work that the Library is used in it and that the Library and its use are covered by this License. You must supply a copy of this License. If the work during execution displays copyright notices, you must include the copyright notice for the Library among them, as well as a reference directing the user to the copy of this License. Also, you must do one of these things: a) Accompany the work with the complete corresponding machine-readable source code for the Library including what-ever changes were used in the work (which must be distributed under Sections 1 and 2 above); and, if the work is an executable linked with the Library, with the complete machine-readable “work that uses the Library”, as object code and/
105ENGENGLISHOPEN SOURCE LICENSEor source code, so that the user can modify the Library and then relink to produce a modified executable containing the modified Library. (It is understood that the user who changes the contents of definitions files in the Library will not neces-sarily be able to recompile the application to use the modified definitions.) b) Use a suitable shared library mechanism for linking with the Library. A suitable mechanism is one that (1) uses at run time a copy of the library already present on the user’s computer system, rather than copying library functions into the executable, and (2) will operate properly with a modified version of the library, if the user installs one, as long as the modified version is interface-compatible with the version that the work was made with. c) Accompany the work with a written offer, valid for at least three years, to give the same user the materials specified in Subsection 6a, above, for a charge no more than the cost of performing this distribution. d) If distribution of the work is made by offering access to copy from a designated place, offer equivalent access to copy the above specified materials from the same place. e) Verify that the user has already received a copy of these materials or that you have already sent this user a copy.For an executable, the required form of the “work that uses the Library” must include any data and utility programs needed for reproducing the executable from it. However, as a special exception, the materials to be distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the execut-able.It may happen that this requirement contradicts the license restrictions of other proprietary libraries that do not normally accompany the operating system. Such a contradiction means you cannot use both them and the Library together in an executable that you distribute. 7. You may place library facilities that are a work based on the Library side-by-side in a single library together with other library facilities not covered by this License, and distribute such a combined library, provided that the separate distribution of the work based on the Library and of the other library facilities is otherwise permitted, and provided that you do these two things: a) Accompany the combined library with a copy of the same work based on the Library, uncombined with any other library facilities. This must be distributed under the terms of the Sections above. b) Give prominent notice with the combined library of the fact that part of it is a work based on the Library, and explaining where to find the accompanying uncombined form of the same work.8. You may not copy, modify, sublicense, link with, or distribute the Library except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense, link with, or distribute the Library is void, and will auto-matically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance. 9. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Library or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Library (or any work based on the Library), you indicate your accep-tance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Library or works based on it. 10. Each time you redistribute the Library (or any work based on the Library), the recipient automatically receives a license from the original licensor to copy, distribute, link with or modify the Library subject to these terms and conditions. You may not impose any further restrictions on the recipients’ exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties with this License. 11. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the con-
106ENGENGLISHOPEN SOURCE LICENSEditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to sat-isfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Library at all. For example, if a patent license would not permit royalty-free redistribution of the Library by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Library. If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply, and the section as a whole is intended to apply in other circumstances. It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest valid-ity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system which is implemented by public license practices. Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice. This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License. 12. If the distribution and/or use of the Library is restricted in certain countries either by patents or by copyrighted inter-faces, the original copyright holder who places the Library under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License. 13. The Free Software Foundation may publish revised and/or new versions of the Lesser General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns.Each version is given a distinguishing version number. If the Library specifies a version number of this License which applies to it and “any later version”, you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Library does not specify a license version number, you may choose any version ever published by the Free Software Foundation. 14. If you wish to incorporate parts of the Library into other free programs whose distribution conditions are incompatible with these, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of soft-ware generally. NO WARRANTY 15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE LIBRARY “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
107ENGENGLISHOPEN SOURCE LICENSEEND OF TERMS AND CONDITIONSHow to Apply These Terms to Your New LibrariesIf you develop a new library, and you want it to be of the greatest possible use to the public, we recommend making it free software that everyone can redistribute and change. You can do so by permitting redistribution under these terms (or, alternatively, under the terms of the ordinary General Public License). To apply these terms, attach the following notices to the library. It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty; and each file should have at least the “copyright” line and a pointer to where the full notice is found. <one line to give the library’s name and an idea of what it does.> Copyright (C) <year> <name of author> This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version.This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details.You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA Also add information on how to contact you by electronic and paper mail. You should also get your employer (if you work as a programmer) or your school, if any, to sign a “copyright disclaimer” for the library, if necessary. Here is a sample; alter the names: Yoyodyne, Inc., hereby disclaims all copyright interest in the library `Frob’ (a library for tweaking knobs) written by James Random Hacker.signature of Ty Coon, 1 April 1990Ty Coon, President of ViceThat’s all there is to it!
108ENGENGLISHOPEN SOURCE LICENSEMozilla Public License 1.1 (MPL 1.1)1. Definitions.1.0.1. “Commercial Use” means distribution or otherwise making the Covered Code available to a third party. 1.1. ‘’Contributor’’ means each entity that creates or contributes to the creation of Modifications.1.2. ‘’Contributor Version’’ means the combination of the Original Code, prior Modifications used by a Contributor, and the Modifications made by that particular Contributor.1.3. ‘’Covered Code’’ means the Original Code or Modifications or the combination of the Original Code and Modifications, in each case includ-ing portions thereof.1.4. ‘’Electronic Distribution Mechanism’’ means a mechanism generally accepted in the software development community for the electronic transfer of data.1.5. ‘’Executable’’ means Covered Code in any form other than Source Code.1.6. ‘’Initial Developer’’ means the individual or entity identified as the Initial Developer in the Source Code notice required by Exhibit A.1.7. ‘’Larger Work’’ means a work which combines Covered Code or portions thereof with code not governed by the terms of this License.1.8. ‘’License’’ means this document.1.8.1. “Licensable” means having the right to grant, to the maximum extent possible, whether at the time of the initial grant or subsequent-lyacquired, any and all of the rights conveyed herein.1.9. ‘’Modifications’’ means any addition to or deletion from the substance or structure of either the Original Code or any previous Modifications. When Covered Code is released as a series of files, a Modificationis:(a) Any addition to or deletion from the contents of a file containing Original Code or previous Modifications.(b) Any new file that contains any part of the Original Code or previous Modifications.1.10. ‘’Original Code’’ means Source Code of computer software code which is described in the Source Code notice required by Exhibit A as Original Code, and which, at the time of its release under this License is not already Covered Code governed by this License.1.10.1. “Patent Claims” means any patent claim(s), now owned or hereafter acquired, including without limitation, method, process, and appara-tus claims, in any patent Licensable by grantor.
109ENGENGLISHOPEN SOURCE LICENSE1.11. ‘’Source Code’’means the preferred form of the Covered Code for making modifications to it, including all modules it contains, plus any associated interface definition files, scripts used to control compilation and installation of an Executable, or source code differential comparisons against either the Original Code or another well known, available Covered Code of the Contributor’s choice. The Source Code can be in a compressedor archival form, provided the appropriate decompression or de-archiving software is widely available for no charge.1.12. “You’’ (or “Your”) means an individual or a legal entity exercising rights under, and complying with all of the terms of, this License or a future version of this License issued under Section 6.1.For legal entities, “You’’ includes any entity which controls, is controlled by, or is under common control with You. For purposes of this definition, “control’’ means (a) the power, direct or indirect, to cause the direction or management of such entity, whether by contract or otherwise, or (b) ownership of more than fifty percent (50%) of the outstanding shares or beneficial ownership of such entity.2. Source Code License.2.1. The Initial Developer Grant. The Initial Developer hereby grants You a world-wide, royalty-free, non-exclusive license, subject to third party intellec-tual property claims:(a) under intellectual property rights (other than patent or trademark) Licensable by Initial Developer to use, reproduce, modify, display, perform, sublicense and distribute the Original Code (or portions thereof) with or without Modifications, and/or as part of a Larger Work; and (b) under Patents Claims infringed by the making, using or selling of Original Code, to make, have made, use, practice, sell, and offer for sale, and/or otherwise dispose of the Original Code (or portions thereof).(c) the licenses granted in this Section 2.1(a) and (b) are effective on the date Initial Developer first distributes Original Code under the terms of this License.(d) Notwithstanding Section 2.1(b) above, no patent license is granted: 1) for code that You delete from the Original Code; 2) separate from the Original Code; or 3) for infringements caused by: i) the modification of the Original Code or ii) the combination of the Original Code with other software or devices.2.2. Contributor Grant.Subject to third party intellectual property claims, each Contributor hereby grants You a world-wide, royalty-free, non-exclusive license(a) under intellectual property rights (other than patent or trademark) Licensable by Contributor, to use, reproduce, mod-ify, display, perform, sublicense and distribute the Modifications created by such Contributor (or portions thereof) either on an unmodified basis, with other Modifications, as Covered Code and/or as part of a Larger Work; and (b) under Patent Claims infringed by the making, using, or selling of Modifications made by that Contributor either alone and/or in combination with its Contributor Version (or portions of such combination), to make, use, sell, offer for sale, have made, and/or otherwise dispose of: 1) Modifications made by that Contributor (or portions thereof); and 2) the combina-tion of Modifications made by that Contributor with its Contributor Version (or portions of such combination).(c) the licenses granted in Sections 2.2(a) and 2.2(b) are effective on the date Contributor first makes Commercial Use of the Covered Code.(d) Notwithstanding Section 2.2(b) above, no patent license is granted: 1) for any code that Contributor has deleted from the Contributor Version; 2) separate from the Contributor Version; 3) for infringements caused by: i) third party modifica-tions of Contributor Version or ii) the combination of Modifications made by that Contributor with other software (except as part of the Contributor Version) or other devices; or 4) under Patent Claims infringed by Covered Code in the absence of Modifications made by that Contributor.
110ENGENGLISHOPEN SOURCE LICENSE3. Distribution Obligations.3.1. Application of License. The Modifications which You create or to which You contribute are governed by the terms of this License, including without limitation Section 2.2. The Source Code version of Covered Code may be distributed only under the terms of this License or a future version of this License released under Section 6.1, and You must include a copy of this License with every copy of the Source Code You distribute. You may not offer or impose any terms on any Source Code version that alters or restricts the applicable version of this License or the recipients’ rights hereunder. However, You may include an additional document offering the additional rights described in Section 3.5. 3.2. Availability of Source Code.Any Modification which You create or to which You contribute must be made available in Source Code form under the terms of this License either on the same media as an Executable version or via an accepted Electronic Distribution Mechanism to anyone to whom you made an Executable version available; and if made available via Electronic Distribution Mechanism,must remain available for at least twelve (12) months after the date it initially became available, or at least six (6) months after a subsequent version of that particular Modification has been made available to such recipients. You are responsible for ensuring that the Source Code version remains available even if the Electronic Distribution Mechanism is maintained by a third party.3.3. Description of Modifications.You must cause all Covered Code to which You contribute to contain a file documenting the changes You made to create that Covered Code and the date of any change. You must include a prominent statement that the Modification is derived, directly or indirectly, from Original Code provided by the Initial Developer and including the name of the Initial Developer in (a) the Source Code, and (b) in any notice in an Executable version or related documentation in which You describe the origin or ownership of the Covered Code.3.4. Intellectual Property Matters(a) Third Party Claims.If Contributor has knowledge that a license under a third party’s intellectual property rights is required to exercise the rights granted by such Contributor under Sections 2.1 or 2.2, Contributor must include a text file with the Source Code distribution titled “LEGAL’’ which describes the claim and the party making the claim in sufficient detail that a recipient will know whom to contact. If Contributor obtains such knowledge after the Modification is made available as described in Section 3.2, Contributor shall promptly modify the LEGAL file in all copies Contributor makes available thereafter and shall take other steps (such as notifying appropriate mailing lists or newsgroups) reasonably calculated to inform those who received the Covered Code that new knowledge has been obtained. (b) Contributor APIs.If Contributor’s Modifications include an application programming interface and Contributor has knowledge of patent licenses which are reasonably necessary to implement that API, Contributor must also include this information in the LEGAL file.(c) Representations.Contributor represents that, except as disclosed pursuant to Section 3.4(a) above, Contributor believes that Contributor’s Modifications are Contributor’s original creation(s) and/or Contributor has sufficient rights to grant the rights conveyed by this License.3.5. Required Notices.You must duplicate the notice in Exhibit A in each file of the Source Code. If it is not possible to put such notice in a particularSource Code file due to its structure, then You must include such notice in a location (such as a relevant directory) where a user would be likely to look for such a notice. If You created one or more Modification(s) You may add your name as a Contributor to the notice described in Exhibit A. You must also duplicate this License in any documentation for the Source Code where You describe recipients’ rights or ownership rights relating to Covered Code. You may choose to offer, and to charge a fee for, warranty, support, indemnity or liability obligations to one or more recipients of Covered Code. However, You may do so only on Your own behalf, and not on behalf of the Initial Developer or any Contributor You must make it absolutely clear than any such warranty, support, indemnity or liability obligation is offered by You alone, and You hereby agree to indemnify the Initial Developer and every Contributor for any liability incurred by the Initial Developer or such Contributor as a result of warranty, support, indemnity or liability terms You offer.
111ENGENGLISHOPEN SOURCE LICENSE3.6. Distribution of Executable Versions.You may distribute Covered Code in Executable form only if the requirements of Section 3.1-3.5 have been met for that Covered Code, and if You include a notice stating that the Source Code version of the Covered Code is available under the terms of this License, including a description of how and where You have fulfilled the obligations of Section 3.2. The notice must be conspicuously included in any notice in an Executable version, related documentation or collateral in which You describe recipients’ rights relating to the Covered Code. You may distribute the Executable version of Covered Code or ownership rights under a license of Your choice, which may contain terms different from this License, provided that You are in compliance with the terms of this License and that the license for the Executable version does not attempt to limit or alter the recipient’s rights in the Source Code version from the rights set forth in this License. If You distribute the Executable version under a different license You must make it absolutely clear that any terms which differ from this License are offered by You alone, not by the Initial Developer or any Contributor. You hereby agree to indemnify the Initial Developer and every Contributor for any liability incurred by the Initial Developer or such Contributor as a result of any such terms You offer.3.7. Larger Works.You may create a Larger Work by combining Covered Code with other code not governed by the terms of this License and distribute the Larger Work as a single product. In such a case, You must make sure the requirements of this License are fulfilled for the Covered Code.4. Inability to Comply Due to Statute or Regulation.If it is impossible for You to comply with any of the terms of this License with respect to some or all of the Covered Code due to statute, judicial order, or regulation then You must: (a) comply with the terms of this License to the maximum extent possible; and (b) describe the limitations and the code they affect. Such description must be included in the LEGAL file described in Section 3.4 and must be included with all distributions of the Source Code. Except to the extent prohib-ited by statute or regulation, such description must be sufficiently detailed for a recipient of ordinary skill to be able to understand it.5. Application of this License.This License applies to code to which the Initial Developer has attached the notice in Exhibit A and to related Covered Code.6. Versions of the License.6.1. New Versions.Netscape Communications Corporation (‘’Netscape’’) may publish revised and/or new versions of the License from time to time. Each version will be given a distinguishing version number.6.2. Effect of New Versions.Once Covered Code has been published under a particular version of the License, You may always continue to use it under the terms of that version. You may also choose to use such Covered Code under the terms of any subsequent version of the License published by Netscape. No one other than Netscape has the right to modify the terms applicable to Covered Code created under this License.6.3. Derivative Works.If You create or use a modified version of this License (which you may only do in order to apply it to code which is not already Covered Code governed by this License), You must (a) rename Your license so that the phrases ‘’Mozilla’’, ‘’MOZILLAPL’’, ‘’MOZPL’’, ‘’Netscape’’, “MPL”, ‘’NPL’’ or any confusingly similar phrase do not appear in your license (except to note that your license differs from this License) and (b) otherwise make it clear that Your version of the license contains terms which differ from the Mozilla Public License and Netscape Public License. (Filling in the name of the Initial Developer, Original Code or Contributor in the notice described in Exhibit A shall not of themselves be deemed to be modifications of this License.)7. DISCLAIMER OF WARRANTY.COVERED CODE IS PROVIDED UNDER THIS LICENSE ON AN “AS IS’’ BASIS, WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, WARRANTIES THAT THE COVERED CODE IS FREE OF DEFECTS, MERCHANTABLE, FIT FOR A PARTICULAR PURPOSE OR NON-INFRINGING. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE COVERED CODE IS WITH YOU. SHOULD ANY COVERED CODE
112ENGENGLISHOPEN SOURCE LICENSEPROVE DEFECTIVE IN ANY RESPECT, YOU (NOT THE INITIAL DEVELOPER OR ANY OTHER CONTRIBUTOR) ASSUME THE COST OF ANY NECESSARY SERVICING, REPAIR OR CORRECTION. THIS DISCLAIMER OF WARRANTY CONSTITUTES AN ESSENTIAL PART OF THIS LICENSE. NO USE OF ANY COVERED CODE IS AUTHORIZED HEREUNDER EXCEPT UNDER THIS DISCLAIMER.8. TERMINATION.8.1. This License and the rights granted hereunder will terminate automatically if You fail to comply with terms herein and failto cure such breach within 30 days of becoming aware of the breach. All sublicenses to the Covered Code which are properly granted shall survive any termination of this License. Provisions which, by their nature, must remain in effect beyond the termination of this License shall survive.8.2. If You initiate litigation by asserting a patent infringement claim (excluding declatory judgment actions) against Initial Developer or a Contributor (the Initial Developer or Contributor against whom You file such action is referred to as “Participant”) alleging that:(a) such Participant’s Contributor Version directly or indirectly infringes any patent, then any and all rights granted by such Participant to You under Sections 2.1 and/or 2.2 of this License shall, upon 60 days notice from Participant terminate prospectively, unless if within 60 days after receipt of notice You either: (i) agree in writing to pay Participant a mutually agreeable reasonable royalty for Your past and future use of Modifications made by such Participant, or (ii) withdraw Your litigation claim with respect to the Contributor Version against such Participant. If within 60 days of notice, a reasonable royalty and payment arrangement are not mutually agreed upon in writing by the parties or the litigation claim is not withdrawn, the rights granted by Participant to You under Sections 2.1 and/or 2.2 automatically terminate at the expiration of the 60 day notice period specified above.(b) any software, hardware, or device, other than such Participant’s Contributor Version, directly or indirectly infringes any patent, then any rights granted to You by such Participant under Sections 2.1(b) and 2.2(b) are revoked effective as of the date You first made, used, sold, distributed, or had made, Modifications made by that Participant.8.3. If You assert a patent infringement claim against Participant alleging that such Participant’s Contributor Version directly or indirectly infringes any patent where such claim is resolved (such as by license or settlement) prior to the ini-tiation of patent infringement litigation, then the reasonable value of the licenses granted by such Participant under Sections 2.1 or 2.2 shall be taken into account in determining the amount or value of any payment or license. 8.4. In the event of termination under Sections 8.1 or 8.2 above, all end user license agreements (excluding distributors and resell-ers) which have been validly granted by You or any distributor hereunder prior to termination shall survive termination. 9. LIMITATION OF LIABILITY.UNDER NO CIRCUMSTANCES AND UNDER NO LEGAL THEORY, WHETHER TORT (INCLUDING NEGLIGENCE), CONTRACT, OR OTHERWISE, SHALL YOU, THE INITIAL DEVELOPER, ANY OTHER CONTRIBUTOR, OR ANY DISTRIBUTOR OF COVERED CODE, OR ANY SUPPLIER OF ANY OF SUCH PARTIES, BE LIABLE TO ANY PERSON FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY CHARACTER INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF GOODWILL, WORK STOPPAGE, COMPUTER FAILURE OR MALFUNCTION, OR ANY AND ALL OTHER COMMERCIAL DAMAGES OR LOSSES, EVEN IF SUCH PARTY SHALL HAVE BEEN INFORMED OF THE POSSIBILITY OF SUCH DAMAGES. THIS LIMITATION OF LIABILITY SHALL NOT APPLY TO LIABILITY FOR DEATH OR PERSONAL INJURY RESULTING FROM SUCH PARTY’S NEGLIGENCE TO THE EXTENT APPLICABLE LAW PROHIBITS SUCH LIMITATION. SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THIS EXCLUSION AND LIMITATION MAY NOT APPLY TO YOU.10. U.S. GOVERNMENT END USERS.The Covered Code is a ‘’commercial item,’’ as that term is defined in 48 C.F.R. 2.101 (Oct. 1995), consisting of ‘’com-mercial computer software’’ and ‘’commercial computer software documentation,’’ as such terms are used in 48 C.F.R. 12.212 (Sept. 1995). Consistent with 48 C.F.R. 12.212 and 48 C.F.R. 227.7202-1 through 227.7202-4 (June 1995), all U.S. Government End Users acquire Covered Code with only those rights set forth herein.
113ENGENGLISHOPEN SOURCE LICENSE11. MISCELLANEOUS.This License represents the complete agreement concerning subject matter hereof. If any provision of this License is held to be unenforceable, such provision shall be reformed only to the extent necessary to make it enforceable. This License shall be governed by California law provisions (except to the extent applicable law, if any, provides otherwise), excluding its conflict-of-law provisions. With respect to disputes in which at least one party is a citizen of, or an entity chartered or registered to do business in the United States of America, any litigation relating to this License shall be subject to the jurisdiction of the Federal Courts of the Northern District of California, with venue lying in Santa Clara County, California, with the losing party responsible for costs, including without limitation, court costs and reasonable attorneys’ fees and expenses. The application of the United Nations Convention on Contracts for the International Sale of Goods is expressly excluded. Any law or regulation which provides that the language of a contract shall be construed against the drafter shall not apply to this License.12. RESPONSIBILITY FOR CLAIMS.As between Initial Developer and the Contributors, each party is responsible for claims and damages arising, directly or indirectly, out of its utilization of rights under this License and You agree to work with Initial Developer and Contributors to distribute such responsibility on an equitable basis. Nothing herein is intended or shall be deemed to constitute any admission of liability.13. MULTIPLE-LICENSED CODE.Initial Developer may designate portions of the Covered Code as Multiple-Licensed. Multiple-Licensed means that the Initial Developer permits you to utilize portions of the Covered Code under Your choice of the MPL or the alternative licenses, if any, specified by the Initial Developer in the file described in Exhibit A.EXHIBIT A -Mozilla Public License.``The contents of this file are subject to the Mozilla Public License Version 1.1 (the “License”); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.mozilla.org/MPL/Software distributed under the License is distributed on an “AS IS” basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License for the specific language governing rights and limitations under the License.The Original Code is ______________________________________.The Initial Developer of the Original Code is ________________________.Portions created by ______________________ are Copyright (C) _____________________________.All Rights Reserved.Contributor(s): ______________________________________.Alternatively, the contents of this file may be used under the termsof the _____ license (the [___] License), in which case the provisions of [______] License are applicable instead of those above.If you wish to allow use of your version of this file only under the terms of the [____] License and not to allow others to use your version of this file under the MPL, indicate your decision bydeleting the provisions above and replace them with the notice andother provisions required by the [___] License. If you do not delete the provisions above, a recipient may use your version of this file under either the MPL or the [___] License.”[NOTE: The text of this Exhibit A may differ slightly from the text of the notices in the Source Code files of the Original Code. You should use the text of this Exhibit A rather than the text found in the Original Code Source Code for Your Modifications.]
114ENGENGLISHOPEN SOURCE LICENSEOpenSSL LicenseCopyright (c) 1998-2008 The OpenSSL Project. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following dis-claimer.2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.3. All advertising materials mentioning features or use of this software must display the following acknowledgment: “This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www.opens-sl.org/)”4. The names “OpenSSL Toolkit” and “OpenSSL Project” must not be used to endorse or promote products derived from this software without prior written permission. For written permission, please contact openssl-core@openssl.org.5. Products derived from this software may not be called “OpenSSL” nor may “OpenSSL” appear in their names without prior written permission of the OpenSSL Project.6. Redistributions of any form whatsoever must retain the following acknowledgment:“This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/)”THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS’’ AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. This product includes cryptographic software written by Eric Young (eay@cryptsoft.com). This product includes software written by Tim Hudson (tjh@cryptsoft.com).Original SSLeay LicenseCopyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) All rights reserved.This package is an SSL implementation written by Eric Young (eay@cryptsoft.com).The implementation was written so as to conform with Netscapes SSL.This library is free for commercial and non-commercial use as long as the following conditions are aheared to. The fol-lowing conditions apply to all code found in this distribution, be it the RC4, RSA, lhash, DES, etc., code; not just the SSL code. The SSL documentation included with this distribution is covered by the same copyright terms except that the holder is Tim Hudson (tjh@cryptsoft.com). Copyright remains Eric Young’s, and as such any Copyright notices in the code are not to be removed. If this package is used in a product, Eric Young should be given attribution as the author of the parts of the library used. This can be in the form of a textual message at program startup or in documentation (online or textual) provided with the package. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:1. Redistributions of source code must retain the copyright notice, this list of conditions and the following disclaimer.2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
115ENGENGLISHOPEN SOURCE LICENSE3. All advertising materials mentioning features or use of this software must display the following acknowledgement:“This product includes cryptographic software written by Eric Young (eay@cryptsoft.com)”The word ‘cryptographic’ can be left out if the rouines from the library being used are not cryptographic related :-).4. If you include any Windows specific code (or a derivative thereof) from the apps directory (application code) you must include an acknowledgement:“This product includes software written by Tim Hudson (tjh@cryptsoft.com)” THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS’’ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. The licence and distribution terms for any publically available version or derivative of this code cannot be changed. i.e. this code cannot simply be copied and put under another distribution licence [including the GNU Public Licence.]MIT license- libcurlCopyright (c) 1996 - 2010, Daniel Stenberg, <daniel@haxx.se>.All rights reserved.Permission to use, copy, modify, and distribute this software for any purpose with or without fee is hereby granted, provided that the above copyright notice and this permission notice appear in all copies.THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.Except as contained in this notice, the name of a copyright holder shall not be used in advertising or otherwise to promote the sale, use or other dealings in this Software without prior written authorization of the copyright holder.- ncurses Copyright (c) 1998 Free Software Foundation, Inc. Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documen-tation files (the “Software”), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, distribute with modifications, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE ABOVE COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR HE USE OR OTHER DEALINGS IN THE SOFTWARE.
116ENGENGLISHOPEN SOURCE LICENSE Except as contained in this notice, the name(s) of the above copyright holders shall not be used in advertising or other-wise to promote the ale, use or other dealings in this Software without prior written authorization.Expat licenseThe source package was downloaded from <URL:http://expat.sourceforge.net>.The original packager is Adam Di Carlo <aph@debian.org>. The current maintainer is Ardo van Rangelrooij <ardo@debian.org>.Copyright (c) 1998, 1999, 2000 Thai Open Source Software Center Ltd and Clark CooperCopyright (c) 2001, 2002, 2003, 2004, 2005, 2006 Expat maintainers.Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documenta-tion files (the “Software”), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.The FreeType Project LICENSECopyright 1996-2002, 2006 by David Turner, Robert Wilhelm, and Werner LembergIntroduction============The FreeType Project is distributed in several archive packages; some of them may contain, in addition to the FreeType font engine, various tools and contributions which rely on, or relate to, the FreeType Project.This license applies to all files found in such packages, and which do not fall under their own explicit license. The license affects thus the FreeType font engine, the test programs, documentation and makefiles, at the very least.This license was inspired by the BSD, Artistic, and IJG (Independent JPEG Group) licenses, which all encourage inclusion and use of free software in commercial and freeware products alike. As a consequence, its main points are that:- We don’t promise that this software works. However, we will be interested in any kind of bug reports. (`as is’ distribu-tion)- You can use this software for whatever you want, in parts or full form, without having to pay us. (`royalty-free’ usage)- You may not pretend that you wrote this software. If you use it, or only parts of it, in a program, you must acknowledge somewhere in your documentation that you have used the FreeType code. (`credits’)We specifically permit and encourage the inclusion of this software, with or without modifications, in commercial prod-ucts. We disclaim all warranties covering The FreeType Project and assume no liability related to The FreeType Project.Finally, many people asked us for a preferred form for a credit/disclaimer to use in compliance with this license. We
117ENGENGLISHOPEN SOURCE LICENSEthus encourage you to use the following text:Portions of this software are copyright <year> The FreeType Project (www.freetype.org). All rights reserved.Please replace <year> with the value from the FreeType version you actually use.Legal Terms0. DefinitionsThroughout this license, the terms `package’, `FreeType Project’ and `FreeType archive’ refer to the set of files originally distributed by the authors (David Turner, Robert Wilhelm, and Werner Lemberg) as the `FreeType Project’, be they named as alpha, beta or final release.`You’ refers to the licensee, or person using the project, where `using’ is a generic term including compiling the project’s source code as well as linking it to form a `program’ or `executable’. This program is referred to as `a program using the FreeType engine’.This license applies to all files distributed in the original FreeType Project, including all source code, binaries and docu-mentation, unless otherwise stated in the file in its original, unmodified form as distributed in the original archive. If you are unsure whether or not a particular file is covered by this license, you must contact us to verify this.The FreeType Project is copyright (C) 1996-2000 by David Turner, Robert Wilhelm, and Werner Lemberg. All rights reserved except as specified below.1. No WarrantyTHE FREETYPE PROJECT IS PROVIDED `AS IS’ WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT WILL ANY OF THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY DAMAGES CAUSED BY THE USE OR THE INABILITY TO USE, OF THE FREETYPE PROJECT.2. RedistributionThis license grants a worldwide, royalty-free, perpetual and irrevocable right and license to use, execute, perform, com-pile, display, copy, create derivative works of, distribute and sublicense the FreeType Project (in both source and object code forms) and derivative works thereof for any purpose; and to authorize others to exercise some or all of the rights granted herein, subject to the following conditions:- Redistribution of source code must retain this license file (`FTL.TXT’) unaltered; any additions, deletions or changes to the original files must be clearly indicated in accompanying documentation. The copyright notices of the unaltered, origi-nal files must be preserved in all copies of source files.- Redistribution in binary form must provide a disclaimer that states that the software is based in part of the work of the FreeType Team, in the distribution documentation. We also encourage you to put an URL to the FreeType web page in your documentation, though this isn’t mandatory.These conditions apply to any software derived from or based on the FreeType Project, not just the unmodified files. If you use our work, you must acknowledge us. However, no fee need be paid to us.3. AdvertisingNeither the FreeType authors and contributors nor you shall use the name of the other for commercial, advertising, or promotional purposes without specific prior written permission. We suggest, but do not require, that you use one or more of the following phrases to refer to this software in your documentation or advertising materials: `FreeType Project’, `FreeType Engine’, `FreeType library’, or `FreeType Distribution’.As you have not signed this license, you are not required to accept it. However, as the FreeType Project is copyrighted material, only this license, or another one contracted with the authors, grants you the right to use, distribute, and modify it. Therefore, by using, distributing, or modifying the FreeType Project, you indicate that you understand and accept all the terms of this license.4. ContactsThere are two mailing lists related to FreeType:freetype@nongnu.orgDiscusses general use and applications of FreeType, as well as future and wanted additions to the library and distribution. If you are looking for support, start in this list if you haven’t found anything to help you in the documentation.freetype-devel@nongnu.org
118ENGENGLISHOPEN SOURCE LICENSEDiscusses bugs, as well as engine internals, design issues, specific licenses, porting, etc.Our home page can be found at http://www.freetype.orgJPEG licenseThis software is copyright (C) 1991-1998, Thomas G. Lane.All Rights Reserved except as specified below.Permission is hereby granted to use, copy, modify, and distribute this software (or portions thereof) for any purpose, without fee, subject to these conditions:(1) If any part of the source code for this software is distributed, then this README file must be included, with this copyright and no-warranty notice unaltered; and any additions, deletions, or changes to the original files must be clearly indicated in accompanying documentation.(2) If only executable code is distributed, then the accompanying documentation must state that “this software is based in part on the work of the Independent JPEG Group”.(3) Permission for use of this software is granted only if the user accepts full responsibility for any undesirable conse-quences; the authors accept NO LIABILITY for damages of any kind.zlib/libpng LicenseThis product may contain open source software licensed under zlib/libpng License.yLibmng : Copyright © 2000-2008 Gerard Juyn (gerard@libmng.com)yLibpng : Copyright (c) 1998-2008 Glenn Randers-Pehrson (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger) (Version 0.88 Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc.)yMd5 checksum : Copyright (C) 1999, 2000, 2002 Aladdin Enterprises. yZlib : Copyright (C) 1995-2010 Jean-loup Gailly and Mark AdlerThis software is provided ‘as-is’, without any express or implied warranty. In no event will the authors be held liable for any damages arising from the use of this software.Permission is granted to anyone to use this software for any purpose, including commercial applications, and to alter it and redistribute it freely, subject to the following restrictions:1. The origin of this software must not be misrepresented; you must not claim that you wrote the original software. If you use this software in a product, an acknowledgment in the product documentation would be appreciated but is not required.2. Altered source versions must be plainly marked as such, and must not be misrepresented as being the original soft-ware.3. This notice may not be removed or altered from any source distribution.Jean-loup GaillyMark AdlerX.net licenseCopyright (c) 1995-2001 International Business Machines Corporation and othersAll rights reserved.Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documen
119ENGENGLISHOPEN SOURCE LICENSEtation files (the “Software”), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, provided that the above copyright notice(s) and this permission notice appear in all copies of the Software and that both the above copyright notice(s) and this permission notice appear in supporting documentation.THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR HOLDERS INCLUDED IN THIS NOTICE BE LIABLE FOR ANY CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.Except as contained in this notice, the name of a copyright holder shall not be used in advertising or otherwise to promote the sale, use or other dealings in this Software without prior written authorization of the copyright holder.BSD license-straceCopyright (c) 1991, 1992 Paul Kranenburg <pk@cs.few.eur.nl>Copyright (c) 1993 Branko Lankester <branko@hacktic.nl>Copyright (c) 1993 Ulrich Pegelow <pegelow@moorea.uni-muenster.de>Copyright (c) 1995, 1996 Michael Elizabeth Chastain <mec@duracef.shout.net>Copyright (c) 1993, 1994, 1995, 1996 Rick Sladkey <jrs@world.std.com>Copyright (C) 1998-2003 Wichert Akkerman <wakkerma@deephackmode.org>Copyright (c) 2002-2008 Roland McGrath <roland@redhat.com>Copyright (c) 2003-2008 Dmitry V. Levin <ldv@altlinux.org>Copyright (c) 2007-2008 Jan Kratochvil <jan.kratochvil@redhat.com>All rights reserved.Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following dis-claimer.2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.3. Neither the names of PolarSSL or XySSL nor the names of its contributors may be used to endorse or promote prod-ucts derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.- xyssl Copyright (C) 2006-2008 Christophe DevineCopyright (C) 2009 Paul Bakker <polarssl_maintainer at polarssl dot org>All rights reserved.Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following dis-
120ENGENGLISHOPEN SOURCE LICENSEclaimer.2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.3. Neither the names of PolarSSL or XySSL nor the names of its contributors may be used to endorse or promote prod-ucts derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.RSA Data Security license Copyright (C) 1991-2, RSA Data Security, Inc. Created 1991. All rights reserved.License to copy and use this software is granted provided that it is identified as the “RSA Data Security, Inc. MD5 Message-Digest Algorithm” in all material mentioning or referencing this software or this function.License is also granted to make and use derivative works provided that such works are identified as “derived from the RSA Data Security, Inc. MD5 Message-Digest Algorithm” in all material mentioning or referencing the derived work.RSA Data Security, Inc. makes no representations concerning either the merchantability of this software or the suitability of this software for any particular purpose. It is provided “as is” without express or implied warranty of any kind.These notices must be retained in any copies of any part of this documentation and/or software.
The model and serial numbers of the TV is located on the back of the TVRecord it below should you ever need service.MODELSERIAL

Navigation menu