LG Electronics USA 9QK-ACC97WKT Wireless Speaker User Manual ACC96WK US

LG Electronics USA Wireless Speaker ACC96WK US

user manual 01

Wireless KitOWNER’S MANUALMODEL: ACC97WK(ACC97WK-T, ACC97WK-R)Before connecting, operating or adjusting this product,please read this owner’s manual carefully and completely.Call us and we willguide you throughyour first recording,for free.1-800-243-0000SpecificationsWireless TXDimensions (approx.)(w x h x d) . . . . . . . . . . . . . . . . . . . . . . . . . . .149 X 79 X 151 mm (5.8 x 3.1 x 5.9 inches)Mass (approx.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0.15 kg (0.33 lbs)Transmission Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2.4GHzPower Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .DC 7VWireless RXPower requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .AC 120 V, 60 HzPower consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50 WDimensions (approx.)(w x h x d) . . . . . . . . . . . . . . . . . . . . . . . . . .111 X 266 X 180 mm (4.3 x 10.4 x 7.0 inches)Mass (approx.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.3 kg (2.86 lbs)Reception Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2.4GHzAmplifier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .155W + 155W (Reated Output Power: 130W, 4Ω, THD 10 %)1. Read these instructions. - All these safety and operatinginstructions should be read before the product is operated.2. Keep these instructions. - The safety, operating and useinstructions should be retained for future reference.3. Heed all warnings. - All warnings on the product and in theoperating instructions should be adhered to.4. Follow all instructions. - All operating and use instructionsshould be followed.5. Do not use this apparatus near water. – For example:near a bath tub, wash bowl, kitchen sink, laundry tub, in awet basement; or near a swimming pool; and other areaslocated near water.6. Clean only with dry cloth. – Unplug this product from thewall outlet before cleaning. Do not use liquid cleaners.7.Do not block any ventilation openings. Install in accor-dance with the manufacturer’s instructions. - Slots andopenings in the cabinet are provided for ventilation and toensure reliable operation of the product and to protect itfrom over- heating. The openings should never be blockedby placing the product on a bed, sofa, rug or other similarsurface. This product should not be placed in a built-ininstallation such as a bookcase or rack unless proper ven-tilation is provided or the manufacturer’s instructions havebeen adhered to.8. Do not install near any heat sources such as radiators,heat registers, stoves, or other apparatus (includingamplifiers) that produce heat.9. Do not defeat the safety purpose of the polarized orgrounding-type plug. A polarized plug has two bladeswith one wider than the other. A groundingtype plughas two blades and a third grounding prong. The wideblade or the third prong are provided for your safety. Ifthe provided plug does not fit into your outlet, consultan electrician for replacement of the obsolete outlet.10. Protect the power cord from being walked on orpinched particularly at plugs, convenience recepta-cles, and the point where they exit from the apparatus.11.Only use attachments/accessories specified by themanufacturer.12. Use only with the cart, stand, tripod, bracket, or tablespecified by the manufacturer, or sold with apparatus.When a cart is used, use caution when moving thecart/apparatus combination to avoid injury from tip-over.13. Unplug this apparatus during lightning storms orwhen unused for long periods of time.14.Refer all servicing to qualified service personnel.Servicing is required when the apparatus has beendamaged in any way, such as power-supply cord orplug is damaged, liquid has been spilled or objectshave fallen into the apparatus, the apparatus has beenexposed to rain or moisture, does not operate nor-mally, or has been dropped.IMPORTANT SAFETY INSTRUCTIONSCAUTION:PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNER’S MANUAL. ANDTHOSE MARKED ON THE PRODUCT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE.This product has been designed and manufactured to assure personal safety. Improper use can result in electric shock or firehazard. The safeguards incorporated in this product will protect you if you observe the following procedures for installation,use, and servicing.This product does not contain any parts that can be repaired by the user.DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE. REFER SERVIC-ING TO QUALIFIED SERVICE PERSONNEL ONLY. This lightning flash with arrowhead symbol withinan equilateral triangle is intended to alert the userto the presence of uninsulated dangerous voltagewithin the product’s enclosure that may be of suffi-cient magnitude to constitute a risk of electric shockto persons. The exclamation point within an equilateral triangleis intended to alert the user to the presence ofimportant operating and maintenance (servicing)instructions in the literature accompanying theproduct.CAUTION:Do not block any ventilation openings. Install in accordancewith the manufacturer's instructions.Slots and openings in the cabinet are provided for ventilationand to ensure reliable operation of the product and to protectit from over heating.The openings should be never be blocked by placing theproduct on a bed, sofa, rug or other similar surface.Thisproduct should not be placed in a built-in installation such asa bookcase or rack unless proper ventilation is provided orthe manufacturer's instruction have been adhered to.CAUTION concerning the Power CordMost appliances recommend they be placed upon a dedi-cated circuit;That is, a single outlet circuit which powers only that appli-ance and has no additional outlets or branch circuits. Checkthe specification page of this owner's manual to be certain.Do not overload wall outlets. Overloaded wall outlets, looseor damaged wall outlets, extension cords, frayed powercords, or damaged or cracked wire insulation are dangerous.Any of these conditions could result in electric shock or fire.Periodically examine the cord of your appliance, and if itsappearance indicates damage or deterioration, unplug it, dis-continue use of the appliance, and have the cord replacedwith an exact replacement part by an authorized servicer.Protect the power cord from physical or mechanical abuse,such as being twisted, kinked, pinched, closed in a door, orwalked upon. Pay particular attention to plugs, wall outlets,and the point where the cord exits the appliance.To disconnect power from the mains, pull out the mains cordplug. When installing the product, ensure that the plug is eas-ily accessible.FCC WARNING: This equipment may generate or use radiofrequency energy. Changes or modifications to this equip-ment may cause harmful interference unless the modifica-tions are expressly approved in the instruction manual. Theuser could lose the authority to operate this equipment if anunauthorized change or modification is made.REGULATORY INFORMATION: FCC Part 15This equipment has been tested and found to comply withthe limits for a Class B digital device, pursuant to Part 15 ofthe FCC Rules. These limits are designed to provide rea-sonable protection against harmful interference when theproduct is operated in a residential installation. This productgenerates, uses, and can radiate radio frequency energyand, if not installed and used in accordance with the instruc-tion manual, may cause harmful interference to radio com-munications. However, there is no guarantee that interfer-ence will not occur in a particular installation. If this productdoes cause harmful interference to radio or television recep-tion, which can be determined by turning the product off andon, the user is encouraged to try to correct the interferenceby one or more of the following measures: •Reorient or relocate the receiving antenna. •Increase the separation between the product andreceiver. •Connect the product into an outlet on a circuit differentfrom that to which the receiver is connected. •Consult the dealer or an experienced radio/TV techni-cian for help.-Labelling information: This device complies with Part 15 ofthe FCC Rules. Operation is subject to the following twoconditions: (1) this device may not cause harmful interfer-ence, and (2) this device must accept any interferencereceived, including interference that may cause undesiredoperation.-RF Exposure Statement: The antenna(s) used for this trans-mitter must be installed to provide a separation distance ofat least 20 cm from all persons and must not be colocatedor operating in conjunction with any antenna or transmitterother than those contained in this device.FCC COMPLIANCE: The responsible party for this product’scompliance is: LG Electronics U.S.A., Inc.,1000 Sylvan Avenue, Englewood Cliffs, NJ.Phone: 1-201-816-2000.FCC Regulations Part 15 Declaration of Conformity(DoC)LG Corporation declares that the equipment described inthis document is within the requirements of the Code ofFederal Regulations listed below:Title 47 Part 15, Subpart B, Class B for a digital device. This declaration is based upon the compliance of the Audiodata transceiver to the above standards. LG has determinedthat the models listed have been shown to comply with theapplicable technical standards if no unauthorized change ismade in the equipment and if the equipment is properlymaintained and operated. Apparatus shall not be exposed to dripping or splashing andno objects filled with liquids, such as vases, shall be placedon the apparatus.CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCKDO NOT REMOVE COVER (OR BACK)NO USER-SERVICEABLE PARTS INSIDEREFER SERVICING TO QUALIFIED SERVICE PERSONNEL.WARNING: TO PREVENT FIRE OR ELECTRIC SHOCKHAZARD, DO NOT EXPOSE THIS PRODUCT TO RAINOR MOISTURE.CAUTIONRISK OF ELECTRIC SHOCK DO NOT OPEN
SetupNote:If there is a product with a strong electromagnetic field near-by, interference may occur.(Ex : Micro wave oven)Wireless TXLED indicator of Wireless TX * LED indicator - “BLUE” The main set is turned on, everthing is connected andtransmitting.* LED indicator - “OFF (No display)” The main set is turned off.Wireless RXLED indicator of Wireless RX * LED indicator - “BLUE” The Wireless TXis receiving a signal of Wireless TX.* LED indicator - “RED” The Wireless RXis in standby mode.Changing a channel of WirelessTX and Wireless RXIf there is a similar wireless product nearby, interference mayoccur. In this case, change to another channel using ID/CHANNEL (ID./CH.) button of Wireless TX.Manual settingPress ID/CHANNEL (ID./CH.) button for about 3 seconds.If the wireless TX and wireless RX signals do not match afteroperating as above, operate it again about three times.Auto setting1Disconnect the DC power cable from the Wireless TX.2Connect the DC power cable Wireless TX while youpressing the ID/CHANNEL (ID.CH.) button of WiressTX. - The blue LED indicator will flicker.3Disconnect the DC power cable from the Wireless TXand release the ID/CHANNEL (ID.CH.) button of WiressTX. 4Connect the DC power cable Wireless TX.Note:The wireless speakers may not receive the changed channel of trans-mitter. In this case set the ID as below.Setting an ID of Wireless TX andWireless RXWhen the unit is manufactured,the ID is already set. If an interference occurs or you use a new Wireless RX, seta new ID.1. Set the wireless TX and wireless RX within 50cm ofeachother.2. Turn the Wireless TX and Wireless RX on. 3.Press the ID/CHNNEL (ID./CH.) button of Wireless TX andID button of Wireless RX at the same time for about 3 sec-onds.4. Release the ID/CHNNEL (ID./CH.) button of Wireless TXand ID button of Wireless RX.- ID is set up.Notes:If there is a product with a strong electromagnetic field nearby,interference may occur.Do not operate a portable transmitter (such as a wireless networkdevice) near this product.LED indicatorDisplays the operatingstatus.SIGNAL ID./CH. DC INSOUND SIGNALconnectorID/CHANNEL (ID./CH.)buttonDC IN connectorLED indicatorDisplays the operatedstatus.ID. button (or ID button)Wireless speaker connectorPower cordConnectionConnect the speakers to the front (right, left) or centerspeaker connectors at the main set.Connect the subwoofer to the woofer connector.Connect the power cord of the Wireless RX to the outlet,then connect the Wireless RX and the rear speaker (right,left) with the speaker cable.Connect the DC IN connector of the Wireless TX and theWireless TX (DC 7V OUT) connector at the main set withthe DC power cable.Connect the SOUND SIGNAL connector of the WirelessTX and rear (right, left) speaker of connectors of the mainset with the sound signal cable.Set the distance between this unit and Wireless RX within10m.Notes:Optimum performance can be implemented only when theWireless TX and the Wireless RX within distance of 2m to 10m isused since communication failure may occur if longer distance isused.Be sure to match the speaker cable to the appropriate terminal onthe components: + to + and – to –. If the cables are reversed, thesound will be distorted and will lack base.It takes about a few seconds (and may take longer) for the WirelessTXand Wireless RXto communicate with each other.When the unit is turned off, the Wireless RX is in standby mode(off) automatically after about 10 seconds.If the Wireless RX is turned off, the wireless speaker will not func-tion.Front speaker (Right)Front speaker (Left) Center speakerRear speaker Rear speakerWireless TXWireless RXDC power cable (Right) (Left)SubwooferSIGNAL ID./CH. DC INSound signal BlackRedcableThis LG Electronics product, will be repaired or replaced, at LG’s option, if it proves to be defective in material or work-manship, under normal use, during the warranty period (“Warranty Period”) listed below, effective from the date (“Dateof Purchase”) of original consumer purchase of the product. This warranty is good only to the original purchaser of theproduct and effective only when used in the United States, excluding U.S. Territories.THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANYWARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. TO THE EXTENT ANY IMPLIED WARRANTYIS REQUIRED BY LAW, IT IS LIMITED IN DURATION TO THE EXPRESS WARRANTY PERIOD ABOVE. LG ELECTRONICS WILLNOT BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL OR PUNITIVE DAMAGES OF ANY NATURE,EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR PROF-ITS, LOST OR CORRUPTED PROGRAMMING OR DATA, OR ANY OTHER DAMAGE WHETHER BASED IN CONTRACT, TORT OROTHERWISE. Some states do not allow the exclusion or limitation of incidental or consequential damages or limitation on how long animplied warranty lasts, so the above exclusion or limitation may not apply to you. This warranty gives you specific legal rights and youmay also have other rights that may vary from state to state.THIS LIMITED WARRANTY DOES NOT APPLY TO:•Damages or operating problems that result from shipping, installation, adjustment of user controls, calibration,maintenance or failure to maintain, or separate system components; and•Damages or operating problems that result from normal wear and tear, misuse, abuse, operation outside environ-mental specifications or contrary to the requirements or precautions in the Operating Guide, accident, lightningstrikes or other natural causes, unauthorized modification or alteration, incorrect electrical current or voltage,reception problem caused by inadequate home antenna or faulty antenna connections, computer software, insti-tutional or commercial use, or other causes not arising out of defect in material or workmanship.Therefore, the cost of repair or replacement of such defective product shall be borne by the consumer.CUSTOMER INTER-ACTIVE CENTER NUMBERS:WARRANTY PERIOD:LABOR: 90 days from the Date of Purchase.PARTS: One Year from the Date of Purchase.*Parts replaced are warranted for the remaining portion ofthe original warranty period.HOW SERVICE IS HANDLED:Call 1-800-243-0000 for instructions on getting the defective unit repaired or replaced.Please retain dated sales receipt and your box to returnthe unit to LG for repair or replacement.Shipping both ways will be paid by LG during the WarrantyPeriod. After the Warranty Period, you pay inbound ship-ping charges and LG pays return shipping charges.Visit our website at: http://www.lgservice.comFor nearest Authorized Service Center, Where to buy,Product Assistance, or Customer AssistanceCall 1-800-243-0000 (24 hours a day, 365 days per year)and select appropriate options from the menu.Or visit our website at http://www.lgservice.comLG Electronics, Inc.Limited Warranty - USALG ELECTRONICS U.S.A., INC.1000 SYLVAN AVENUEENGLEWOOD CLIFFS, NJP/N : 3834RV0052FIssue OPrinted in IndonesiaAbout Ferrite CoreBe sure to attach the ferrite core to the speaker cables (forconnecting to this unit).This ferrite core can reduce noises.How to attach the ferrite core 1Press the stopper [a] of the ferrite core to open.2Wind the cable once on the ferrite core.3Close the ferrite core unitl it clicks.Note:Attach the ferrite core near the unit (Refer to the fig.3 and com-ment.).The length here isas short as possible.

Navigation menu