LG Electronics USA C410 Cellular/PCS GSM/EDGE/WCDMA Phone with Bluetooth User Manual LG C410 ATT UG EN 131015

LG Electronics MobileComm USA, Inc. Cellular/PCS GSM/EDGE/WCDMA Phone with Bluetooth LG C410 ATT UG EN 131015

Users Manual

User Guide
All screen shots in this guide are simulated.
Actual displays and the color of the phone may vary.
Some of the contents in this manual may differ from your phone
depending on the software of the phone or your service provider.
00000000 (1.0) www.lg.com
LG-C410
LIMITED WARRANTY STATEMENT
1. WHAT THIS WARRANTY COVERS :
LG offers you a limited warranty that the
enclosed subscriber unit and its enclosed
accessories will be free from defects in material
and workmanship, according to the following
terms and conditions:
1. The limited warranty for the product extends for
TWELVE (12) MONTHS beginning on the date
of purchase of the product with valid proof of
purchase, or absent valid proof of purchase,
FIFTEEN (15) MONTHS from date of manufacture
as determined by the unit’s manufacture date
code.
2. The limited warranty extends only to the original
purchaser of the product and is not assignable
or transferable to any subsequent purchaser/end
user.
3. This warranty is good only to the original
purchaser of the product during the warranty
period as long as it is in the U.S, including Alaska,
Hawaii, U.S. Territories and Canada.
4. The external housing and cosmetic parts shall
be free of defects at the time of shipment and,
therefore, shall not be covered under these
limited warranty terms.
5. Upon request from LG, the consumer must provide
information to reasonably prove the date of
purchase.
6. The customer shall bear the cost of shipping the
product to the Customer Service Department of
LG. LG shall bear the cost of shipping the product
back to the consumer after the completion of
service under this limited warranty.
2. WHAT THIS WARRANTY DOES
NOT COVER :
1. Defects or damages resulting from use of the
product in other than its normal and customary
manner.
2. Defects or damages from abnormal use,
abnormal conditions, improper storage,
exposure to moisture or dampness, unauthorized
modifications, unauthorized connections,
unauthorized repair, misuse, neglect, abuse,
accident, alteration, improper installation, or
other acts which are not the fault of LG, including
damage caused by shipping, blown fuses, spills of
food or liquid.
3. Breakage or damage to antennas unless caused
directly by defects in material or workmanship.
4. That the Customer Service Department at LG was
not notified by consumer of the alleged defect or
malfunction of the product during the applicable
limited warranty period.
5. Products which have had the serial number
removed or made illegible.
6. This limited warranty is in lieu of all other
warranties, express or implied either in fact or
by operations of law, statutory or otherwise,
including, but not limited to any implied warranty
of marketability or fitness for a particular use.
7. Damage resulting from use of non-LG approved
accessories.
8. All plastic surfaces and all other externally
exposed parts that are scratched or damaged due
to normal customer use.
9. Products operated outside published maximum
ratings.
10. Products used or obtained in a rental program.
11. Consumables (such as fuses).
3. WHAT LG WILL DO:
LG will, at its sole discretion, either repair,
replace or refund the purchase price of any unit
that does not conform to this limited warranty. LG
may choose at its discretion to use functionally
equivalent reconditioned, refurbished or new
units or parts or any units. In addition, LG will
not re-install or back-up any data, applications
or software that you have added to your phone.
It is therefore recommended that you back-up
any such data or information prior to sending the
unit to LG to avoid the permanent loss of such
information.
4. STATE LAW RIGHTS :
No other ex warranty is applicable to this
product. THE DURATION OF ANY IMPLIED
WARRANTIES, INCLUDING THE IMPLIED
WARRANTY OF MARKETABILITY, IS LIMITED
TO THE DURATION OF THE EXPRESS
WARRANTY HEREIN. LG INFOCOMM INC.
SHALL NOT BE LIABLE FOR THE LOSS OF THE
USE OF THE PRODUCT, INCONVENIENCE,
LOSS OR ANY OTHER DAMAGES, DIRECT OR
CONSEQUENTIAL, ARISING OUT OF THE USE
OF, OR INABILITY TO USE, THIS PRODUCT
OR FOR ANY BREACH OF ANY EXPRESS OR
IMPLIED WARRANTY, INCLUDING THE IMPLIED
WARRANTY OF MARKETABILITY APPLICABLE TO
THIS PRODUCT.
Some states do not allow the exclusive of
limitation of incidental or consequential damages
or limitations on how long an implied warranty
lasts; so these limitations or exclusions may not
apply to you. This warranty gives you specific
legal rights and you may also have other rights
which vary from state to state.
5. HOW TO GET WARRANTY
SERVICE :
To obtain warranty service, please call or fax to
the following telephone numbers from anywhere
in the continental United States:
Tel. 1-800-793-8896 or Fax. 1-800-448-4026
Or visit www.lg.com.
Correspondence may also be mailed to:
LG Electronics MobileComm U.S.A., Inc.
201 James Record Road Huntsville, AL 35824
DO NOT RETURN YOUR PRODUCT TO THE
ABOVE ADDRESS.
Please call or write for the location of the LG
authorized service center nearest you and for the
procedures for obtaining warranty claims.
4
Your Phone ...............................................8
Phone Components ........................................... 8
Rear View ......................................................... 10
QWERTY Keys .................................................. 11
Getting Started ....................................... 12
Installing the SIM Card and Battery ........... 12
Charging your phone ...................................... 14
Installing a memory card .............................. 14
General Functions ................................. 17
Making a Call................................................... 17
Answering a Call ............................................ 18
Adjusting the Volume ..................................... 18
Setting Profiles ................................................ 19
Entering Text .................................................... 20
QWERTY Keyboard ......................................... 23
Address Book ......................................... 25
AT&T Address Book Native Sync (AAB) .... 25
Address Book ................................................... 25
New Contact .................................................... 25
Caller Groups ................................................... 26
Speed Dial ........................................................ 26
Management .................................................... 27
Service Dial Numbers .................................... 28
My Contact Info ............................................... 28
In-Call Menu .......................................... 29
During a Call .................................................... 29
Making a Second Call ........................................ 29
Swapping Between Two Calls ........................... 29
Answering an Incoming Call .............................. 29
Rejecting an Incoming Call ................................. 29
Muting the Microphone ..................................... 30
Using the Speakerphone .................................... 30
Conference Calls ............................................. 30
Making a Second Call ........................................ 31
Setting Up a Conference Call ............................. 31
Activate the Conference Call on Hold ............... 31
Adding Calls to the Conference Call .................. 31
Private Call in a Conference Call ....................... 31
Ending a Conference Call ................................... 31
Your Standby Screen ............................ 32
Touchscreen Tips ................................................ 32
The Quick Keys ................................................... 33
Home Screen .................................................... 34
Widget ................................................................ 34
Contacts .............................................................. 35
Shortcut ............................................................... 36
Table of Contents
5
Annunciator Bar .................................................. 37
Menu Tree ............................................... 38
Messaging .............................................. 39
New Message .................................................. 39
Inbox .................................................................. 42
Conversation View .............................................. 42
Standard View .................................................... 42
Drafts ................................................................. 43
Outbox ............................................................... 43
Voicemail .......................................................... 44
Message Settings ........................................... 44
Message Alert .................................................... 44
Save To ................................................................ 45
Signature ............................................................. 45
Text Message...................................................... 45
Multimedia Message ......................................... 45
Voicemail Number .............................................. 46
Service Message ................................................ 46
Mobile Email .................................................... 46
AT&T GPS ...............................................47
YPmobile ................................................. 49
Mobile Web ............................................ 50
AppCenter ............................................... 52
Home .................................................................. 52
Search ............................................................... 52
Categories ......................................................... 52
Account ............................................................. 52
Music Player .......................................... 53
Music Player .................................................... 53
Additional Music Services ........................... 59
Multimedia ............................................. 60
App Manager ................................................... 60
Games & Apps ................................................. 60
Camera .............................................................. 60
Take Photo ........................................................... 60
Record Video ....................................................... 63
Album .................................................................. 64
My Stuff ................................................... 65
AT&T Social Net .............................................. 65
Audio .................................................................. 65
Pictures ............................................................. 65
Video .................................................................. 65
Tools ................................................................... 66
6
Table of Contents
Voice Recorder .................................................... 66
Voice Command .................................................. 67
Calendar .............................................................. 69
Notepad .............................................................. 70
World Clock ......................................................... 70
Tasks.................................................................... 70
Stopwatch ........................................................... 71
Calculator ............................................................ 72
Tip Calculator ...................................................... 72
Unit Converter ..................................................... 72
Clock .................................................................... 72
File Manager .................................................... 73
Other Files......................................................... 74
Settings ................................................... 75
Call ..................................................................... 75
Call Forwarding ................................................... 75
Send My Number................................................ 75
Auto Redial ......................................................... 75
Answer Mode ..................................................... 76
Minute Minder .................................................... 76
Call Waiting ........................................................ 76
Call Reject ........................................................... 76
Send DTMF Tones ............................................... 77
TTY ...................................................................... 77
Hearing Aid ......................................................... 77
Time & Cost ........................................................ 77
Sound ................................................................. 77
Ringtone .............................................................. 77
Message Tone..................................................... 78
Alert Tone ............................................................ 78
Dial Readout ....................................................... 78
Keypad Tone ........................................................ 78
Multimedia .......................................................... 78
Call ...................................................................... 78
Display ............................................................... 79
Wallpapers .......................................................... 79
Fonts .................................................................... 79
Brightness ........................................................... 79
Backlight Timer ................................................... 79
Phone ................................................................. 79
Date & Time ........................................................ 79
Languages ........................................................... 79
Auto Screen Lock ................................................ 80
Set Flight Mode .................................................. 80
Touch ................................................................... 81
Security ............................................................... 81
Reset Settings .................................................... 82
Bluetooth ........................................................... 83
Connection........................................................ 85
Application ....................................................... 86
More ................................................................... 88
7
Start Up Guide .................................................... 88
Memory ............................................................... 88
Software Update ................................................ 89
Phone Information .............................................. 89
Q&A .......................................................... 90
Accessories............................................ 91
For Your Safety ....................................... 92
Safety Guidelines .................................. 98
Glossary ................................................ 119
8
Phone Components
4
5
6
7
1
2
3
10
8
9
Your Phone
9
1. Earpiece: Lets you hear the caller and
automated prompts.
2. Home screen: Displays phone status
icons, menu items, web items, web
information, pictures and more in full color.
You can select menu items by touching the
corresponding icons on the touchpad.
3. Send Key : Press this key in
standby mode to quickly access the most
recent missed, dialed and received calls.
4. 3.5 mm Headset Jack: Allows you to
connect 3.5 mm headset to listen to music
or hold conversations.
5. Power/Lock Key :
s Powers your phone on/off by pressing
and holding the key.
s Turns your screen on and off and locks it.
6. End Key : Ends or rejects a call.
Press once to return to the standby screen.
7. Clear/Back Key : Allows you
to return to the previous screen. Press
and hold to activate the Voice Command
function.
8. Volume Keys
s When on the standby screen: Allows
you to set the Ringtone volume. Hold the
Volume Down Key to toggle the Vibrating
Mode On and Off.
s During a call: Allows you to change the
Earpiece volume.
s When playing background music:
Allows you to change the music volume.
9. Charger/USB Port: Allows you to
connect the charger or other compatible
accessories.
10. Camera Key: Press to start the Camera
function. Press and hold to start the Video
record function.
Your Phone
10
Your Phone
Rear View
Back cover
Battery
microSD™ memory card slot
SIM card slot
Camera lens
Camera Key
11
Your Phone
QWERTY Keys
Mobile Email
Key
Mobile Web
Key
Alt Key
Press to enter alternate
characters, such as 1 for .
To lock this function, press
twice; press it again to
switch back to normal entry
mode.
New Message
Key
Caps Key
Press to change between
Upper Case and Lower Case.
Sym Key
Press to open the menu with Symbol entry options.
Space Key
Press to create a space between words.
Press to enter “@”.
Instant Note Key
Press to create an
instant note.
Delete Key
Deletes digits and
letters.
Enter Key
Navigation Keys
12
Installing the SIM Card and
Battery
1. Remove the back cover
Hold the phone on your hand firmly. With
the other hand, lift the back cover using
the fingertip cutout located on the bottom
of the cover and remove it.
2. Remove the battery
Use the fingertip cutout at the bottom of
the battery compartment to lift the battery
and remove it.
Warning
Do not remove the battery when the phone is
switched on, as this may damage the phone.
Getting Started
13
Getting Started
3. Install the SIM card
Slide the SIM card into the SIM card slot.
Make sure that the gold contact area on
the card is facing downward. To remove
the SIM card, pull it gently in the opposite
direction.
4. Install the battery
Insert the top of the battery first into the
top edge of the battery compartment.
Ensure that the battery contacts align
with the terminals on the phone. Press the
bottom of the battery down until it clicks
into place and replace the back cover.
14
Getting Started
Charging your phone
Lift the Charger/USB Port cover on the bottom
left side of your LG-C410. Insert the charger
connector to the phone (ensure that side ‘B’ of
the connector is facing up) and then plug the
other end into the wall socket. Your LG-C410
will need to be charged until fully charged.
You will receive a ‘Battery Full’ notification.
Important!
You should insert the battery before
charging.
Note
Always unplug the charger from the wall
socket after the phone is fully charged to save
unnecessary power consumption of the charger.
Warning
Use of unauthorized accessories could damage
your phone and void your warranty.
Installing a memory card
You can expand the available memory space
on your phone by using a microSD™ card.
The LG-C410 will support up to a 32 GB
microSD™ card.
Note
Memory cards must be purchased separately.
15
Getting Started
1. Remove the back cover and locate the
microSD™ memory card slot.
2. Insert a microSD™ card with the gold
contact area facing downwards.
3. Replace the back cover.
Note
If your memory card has existing content it will
automatically be filed in the correct folder. For
example, videos will be accessible from the
Videos folder. If your memory card has protected
content (i.e. content such as songs or graphics
with Digital Rights Management copywriting
loaded from another device), they will not
be accessible. You may need to reformat the
memory card prior to using it with this device.
16
Getting Started
ICON/
INDICATOR
DESCRIPTION
Network signal strength
(number of bars will vary)
No network signal
Battery empty
New text message
New email
An alarm is set
Ring profile in use
Silent profile in use
Call Forward
Calendar event with Alarm is set
ICON/
INDICATOR
DESCRIPTION
Bluetooth is active
The browser is active
Vibration mode
Ring and Vibration mode
Ring after Vibration mode
Speakerphone
Call in Progress
Voicemail
Battery Full
Battery Charging
Flight Mode
On-Screen Icons
The table below describes various display indicators or icons that appear on the phone’s display
screen.
17
Making a Call
1. Make sure your phone is powered on.
2. Touch and enter a phone number using
the dial pad or open the slide and enter a
phone number using the QWERTY keys.
To edit a number on the display screen,
simply touch to erase one digit
at a time.
Ź
Touch and hold to erase the
entire number.
3. Press the Send Key to call the
number. Or touch on the dial pad.
Making a Call with the Send Key
1. Press the Send Key and the most
recent missed, dialed and received phone
calls will be displayed.
2. Select the desired number.
3. Press the Send Key or touch
Call Back
.
Making International Calls
1. When entering a phone number, press
on the QWERTY keyboard and the
international access character ‘+’ will
appear. When using the dial pad to dial,
touch and hold .
2. Enter the country code, area code and the
phone number.
3. Press the Send Key to call the
number. Or touch .
Ending a Call
When you have finished a call, press the End
Key .
Making a Call from the Contacts
You can store frequently called names and
phone numbers in the SIM card as well as in
the phone memory known as the Contacts.
You can dial a number by simply selecting a
name in the Contacts List and pressing the
Send Key .
General Functions
18
General Functions
Answering a Call
When you receive a call, the phone rings and
the phone icon appears on the screen. If the
caller can be identified, the caller’s phone
number (or name if stored in your Address
Book) is displayed.
1. Press the Send Key or unlock the
screen and touch . If Any
Key has been set as the Answer Mode, any
key press will answer a call except for the
Volume Keys , End Key
, Power/Lock Key , or the
Camera Key .
2. End the call by pressing the End Key
.
Note
You can answer a call while using other
functions or features.
Adjusting the Volume
During a call, if you want to adjust the
earpiece volume, use the Volume Keys of
the phone.
In the standby screen, you can adjust the ring
volume using the Volume Keys.
19
General Functions
Setting Profiles
Press either of the Volume Keys. You can
adjust the ringtone volume from the Ringtone
menu and you can also set your ringtone
profile to Ring, Vibrate All, Silent All.
Profiles
Vibrating Mode (Quick)
Vibrating Mode can be activated by touching
and holding from the dial pad. You can
also set Vibrating Mode by pressing and
holding down the Volume Down Key as well.
The phone will display ‘Vibrating Mode On’.
If you would like to turn Vibrating mode Off,
touch and hold again.
Signal Strength
If you are inside a building, being near a
window may give you better reception. You
can see the strength of your signal by the
signal indicator on your phone’s display
screen.
20
General Functions
Entering Text
You can enter alphanumeric characters by
using the phone’s touch pad. For example,
storing names in the Address Book, writing a
message or scheduling events in the calendar
all require text to be entered.
The following text input modes are available
on the phone.
Changing the Text Input Mode
You can change the text input mode by
touching the Text Input Mode toggle button
on the touch screen.
ABC Mode
This mode allows you to enter letters by
touching the key labeled with the required
letter once, twice, three or four times until the
letter is displayed.
123 Mode (Numbers Mode)
Type numbers using one key touch per
number. To change to 123 mode in a text entry
field, touch .
Symbol Mode
The Symbol Mode enables you to enter
various symbols or special characters.
To enter a symbol, touch , then .
Then select the desired symbol.
Using the T9 Mode
The T9 predictive text input mode allows you
to enter words easily with a minimum number
of key presses. As you touch each key, the
phone begins to display the characters that
it thinks you are typing based on a built-in
dictionary. As new letters are added, the word
changes to reflect the most likely candidate
from the dictionary. To use T9 Mode, touch
to activate it. Once activated, an
orange dot will be displayed on the T9 Key
.
21
General Functions
1. When you are in the T9 predictive text
input mode, begin entering a word by
pressing the touch screen keys.
Touch one key per letter.
Ź
The word changes as letters are typed -
ignore what is displayed on the screen
until the word is typed completely.
Ź
If the word is still incorrect after typing
completely, touch on the pop-up
menu to see the options. Then select
the word you want by touch.
(To display the word candidates,
first you need to select the Show
Candidate option. Touch Options
> Text Entry Settings > Show
Candidate.)
Ź
If the desired word is missing from the
word choices list, add it by pressing
and selecting to enter the
new word. Then touch Save to save the
word into the built-in dictionary.
2. Enter the whole word before editing or
deleting any letters.
3. Complete each word with a space by
touching .
To delete letters, touch . Touch and
hold down to erase the entire text
entry.
Note
Pressing the End Key will save your
unsaved message in the Drafts folder.
Using the ABC Mode
Use the touch pad keys to enter your text.
1. Touch the touch key labeled with the
required letter:
Ź
Once for the first letter
Ź
Twice for the second letter
Ź
And so on
2. To insert a space, touch . To
delete letters, touch . Touch and
hold down to erase the entire text
entry.
22
General Functions
Note
Refer to the table below for more information
on the characters available using the keys.
Touch to input an Upper Case letter. To
change text entry mode from Lower Case to
Upper Case, touch twice and the icon
will switch to - indicating that Caps
Lock has been activated.
Key Characters in the Order Display
Upper Case Lower Case
1 . , ' @ ? ! - : / 1 . , ' @ ? ! - : / 1
2 A B C 2 a b c 2
3 D E F 3 d e f 3
4 G H I 4 g h i 4
5 J K L 5 j k l 5
6 M N O 6 m n o 6
7 P Q R S 7 p q r s 7
8 T U V 8 t u v 8
9 W X Y Z 9 w x y z 9
0Space Key,
0 (Long press)
Space Key,
0 (Long press)
Using the 123 (Numbers) Mode
The 123 Mode enables you to enter numbers
in a text message (a telephone number,
for example) more quickly. Touch the keys
corresponding to the required digits before
manually switching back to the appropriate
text entry mode.
My Dictionary
The T9 Dictionary is a feature that allows the
user to add any unique or personal words
to the T9 standard language database. The
T9 Dictionary function can be selected by
touching Options > Text Entry Settings
> My Dictionary while entering text.
Within the T9 Dictionary function, the user
can add, modify, delete or reset personal
words.
Note
You can select a different T9 language from the
same Options menu. By default, T9 entry modes
are set to off.
23
General Functions
QWERTY Keyboard
Text input using the QWERTY
Keyboard
When you are entering text, the QWERTY
keyboard will default to ABC mode. If you are
entering a number, for example when making
a call, the keyboard number keys will default
to numbers. However, while in ABC mode you
can still enter numbers by pressing . To
lock the Alt Key, press it twice; press it again
to switch back to normal entry mode.
Note
Some fields may allow only one text input mode
(e.g. telephone number in Address Book fields).
In the text entry field, press and select a
symbol from the touch screen.
Complete each word with a space by pressing
. To delete a character, press .
Using the Korean Mode
Allows you to type in Korean.
When you use Touch Keypad
Allows you easily input the letters. To input ,
touch and touch . To input ,
touch and touch .
24
General Functions
When you use Qwerty Keypad
Open the slide and touch Options .
Choose Text Entry Settings and Show Key
Guide. You can see the Korean key guide on
the monitor. To input numbers, touch .
Press and you can see the Korean key
guide as below. To lock to this mode, press it
twice; press it again to switch back to normal
entry mode.
25
From the standby screen, touch and touch
to access your Address Book.
AT&T Address Book Native
Sync (AAB)
AT&T Address Book Native Sync (AAB) is a
service application for the synchronization
of phone contact list information with the
AAB server. When you turn on the phone or
change your SIM card, the AAB application is
displayed after entering the Address Book.
After checking the membership identification
for this service, you can find the menu for the
synchronization with the AAB server.
Ź
From the standby screen, touch >
Options > My Settings > AT&T
Address Book.
Address Book
The Address Book allows you to save and
manage contact address information. The
Address Book's functions allow you to add
a new address or search saved contact
addresses by name. To search for a contact,
touch and input the contact person’s
name. If you input ‘At’, it will show all
contacts beginning with ‘At’ in their names.
Ź
: Search a contact.
Ź
: Allows you to quickly jump to a
contact of a specific letter.
New Contact
The Add New option allows you to add a
new contact address. You can enter contact
address information, including: name, phone
numbers, email addresses, group information,
pictures, ringtone and a memo.
1. From the standby screen, touch and
touch Add New.
Address Book
26
2. Touch to set a Picture ID for a contact
by using a saved picture from Pictures or
taking a new picture of the contact person.
Choose from No picture, Pictures or
Take New Picture. After you take a new
picture of the contact person, touch set
as the Contact Picture ID.
Ź
Enter the contact's first and last name.
Ź
Enter a phone number. Touch so you
can set that number as a Speed Dial. For
more information, see the “Speed Dial”
section.
Ź
Enter an email address.
Ź
Select a Group for the contact.
Ź
Set the ringtone for the contact or leave it
as default ringtone.
Ź
Add memo if necessary.
Ź
Choose whether to save the contact to
Phone or SIM Card memory.
3. Touch Save to save the contact.
Caller Groups
The Groups option allows you to manage
group information. You can also configure a
ring tone for a group so that the group ring
tone sounds when a call from a specific
contact address within that group is received
and there is no ring tone configured for the
specific contact address.
1. From the standby screen, touch and
touch All Contacts.
2. A drop-down menu will appear. Touch
Groups.
Speed Dial
You can assign a frequently-called contact
to a speed dial list. You can select a number
from 2 to 9 as a speed dial. You can configure
speed dial numbers for any of the 8 numbers
for a specific contact address.
Address Book
27
Address Book
1. From the standby screen, touch .
2. Touch a contact.
3. Touch > Set Speed Dial.
4. Touch the Speed Dial location from 2
through 9.
Ź
Your Voicemail is already set to speed
dial 1. This is a default setting and can not
be changed.
Ź
To call an assigned speed dial number,
touch from the standby screen. Then
touch and hold the assigned number; the
call will be placed to the assigned number
automatically.
To see your Speed Dial entries:
1. From the standby screen, touch and
touch All Contacts.
2. A drop-down menu will appear, touch
Speed Dial.
Management
This menu allows you to copy information
from your SIM card, e.g. name, handset
number, etc. to your handset. If a name is
duplicated during the copying operation, the
information is also duplicated.
You can also copy entries from the SIM card
to the phone memory and entries from the
handset memory to the SIM card (not all the
data will be copied).
28
Address Book
From this menu, you are also able to delete
entries in the SIM card and the Handset.
1. From the standby screen, touch and
touch Options .
2. A drop-down menu will appear. Touch SIM
Management.
Service Dial Numbers
You can view the list of Service Dial Numbers
(SDN) assigned by your network provider.
Such numbers could include the emergency
services, directory assistance and voice mail
numbers.
1. From the standby screen, touch and
touch Options .
2. A drop-down menu will appear. Touch
Service Dial Numbers.
3. The names of the available services will
be shown.
4. Touch a service number. Press the Send
Key .
My Contact Info
This displays your own contact information.
You can edit and create the contact
information. Depending on the SIM card,
the number of business cards you can enter
can vary.
1. From the standby screen, touch and
touch Options .
2. A drop-down menu will appear. Touch My
Settings and My Contact Info.
3. Touch an empty field, then enter and save
your information.
29
Your phone provides a number of control
functions that you can use during a call. To
access these functions during a call, touch
Options .
During a Call
Making a Second Call
You can select a number you wish to dial, to
make a second call.
1. Touch , enter the second phone
number and touch .
or
Touch to select a contact from your
Address Book and then touch .
Swapping Between Two Calls
Once the second call has been dialed (and
answered), you can switch between the two
on-going calls.
Press the Send Key or touch .
Answering an Incoming Call
To answer an incoming call when the handset
is ringing, simply press the Send Key
or touch . The handset is
also able to warn you of an incoming call
while you are already on a call. Two tones
will sound in the earpiece, and the display
will show that a second call is waiting. This
feature, known as Call Waiting, is only
available if your network supports it.
If Call Waiting is turned on, you can put the
first call on hold and answer the second call
by pressing the Send Key .
Rejecting an Incoming Call
You can reject an incoming call without
answering by simply pressing the End Key
or touching .
In-Call Menu
30
In-Call Menu
Muting the Microphone
You can mute the microphone during a call by
touching . The handset can be unmuted
by touching again. When the handset is
muted, the caller cannot hear you, but you can
still hear the caller.
Using the Speakerphone
You can use the integrated Speakerphone
during a call by touching . The
loudspeaker is automatically deactivated
when you end the call.
Warning
Due to increased volume levels, do not place
the phone near your ear while the speakerphone
is enabled.
Conference Calls
The conference service provides you with the
ability to have a simultaneous conversation
with more than one caller. The conference
call feature can be used only if your network
service provider supports this feature.
Once a conference call is set up, calls may
be added, disconnected or separated (that
is, removed from the conference call but still
connected to you) by the person who set up
the conference call. These options are all
available from the In-Call menu.
The maximum number of callers in a
conference call is five. Once started, you are
in control of the conference call, and only you
can add calls to the conference call.
31
In-Call Menu
Making a Second Call
You can make a second call while currently on
a call simply by pressing , entering the
second number and pressing the .
When the second call is connected, the first
call is automatically placed on hold. You can
swap between calls by pressing the Send
Key .
Setting Up a Conference Call
To set up a conference call, place the first
call. Once that is connected, follow the
steps above to make a second call. You can
then join the two separate calls by touching
Options and select Merge Calls.
Activate the Conference Call on
Hold
To activate a conference call on hold, press
the Send Key .
Adding Calls to the Conference
Call
To add a call to an existing conference call,
touching Options and select Merge
Calls.
Private Call in a Conference Call
To have a private call with one caller from
a conference call, touch . When the
numbers of the callers are displayed, touch
next to the one you wish to speak in
private with. Only the person who initiates the
Conference Call can initiate a Private Call.
Ending a Conference Call
The currently active conference call can
be disconnected by pressing the End Key
.
32
From the standby screen, you can access all
menu options, make a quick call and view
the status of your phone - as well as many
other things.
Touchscreen Tips
Ź
The standby screen is also a great place to
get accustomed to the touchscreen.
Ź
To select an item, touch the icon
accurately.
Ź
To scroll through lists, touch the last item
visible and slide your finger up the screen.
The list will move up so more items are
visible.
Ź
There’s no need to press hard. The
touchscreen is sensitive enough to pick up
on a light yet firm touch.
Ź
Use the tip of your finger to touch the
option you require. Do not use your
fingernail.
Ź
When the screen light is off, press the
Power/Lock Key on the top side
twice to restore the standby screen.
Ź
Don’t cover the phone with a case or cover
as the touchscreen will not work with any
material covering it.
Your Standby Screen
33
The Quick Keys
The Quick Keys on your standby screen provide easy, one-touch access to your most used
functions.
Touch to bring up the touch
dial pad, to make a call. Input
the number as you would using
a normal key pad and touch
or press the Send Key
.
Quick Keys
AT&T
Touch to open your contacts and
search for the number you want
to call. You can also create new
contacts and edit existing ones.
Touch to access the Messaging
menu. From here you can create a
new outgoing message.
Touch to open the Main Menu
which is separated into four sub-
menus. Touch the vertical tabs
along the right side of the screen
to view further options.
Your Standby Screen
34
Your Standby Screen
Home Screen
LG-C410 provides three types of Home
Screens. To swap between the Home Screens,
just swipe quickly over the display from left to
right or right to left.
Widget
Allows you to use Widgets and even add
them to your Home screen.
Ź
The Widget Home screen is your default
Home screen. If you are on another Home
screen, touch at the top of
the screen.
Ź
Touch to open the widget panel.
Ź
Drag a widget from the menu onto the
Widget Home screen. You can drag the
widget panel to the left or right to view
additional widgets. Touch again to
close the widget panel.
Ź
You can play songs, add memos, check the
calendar, play a slide show, set an alarm,
set your current and second city or add
calendar events directly from the standby
screen using the Widget Home Screen.
Widget
AT&T
35
Your Standby Screen
Contacts
Allows you to easily contact your friends and
family by displaying your favorite contacts on
the standby screen.
Ź
First, touch from the
standby screen. Then touch .
Contacts
Ź
Touch
Add
to register your favorite
contacts. You can add up to 30 contacts on
the screen.
Ź
If you want to delete a contact from this
screen, touch .
Ź
Touch
Done
to finish editing the Contacts
on this screen.
36
Your Standby Screen
Ź
To access your Contacts, simply touch
on their corresponding icon. Touch
to call, to send a
message and to check messages
received from that person. And touch
to check call history.
Ź
If you want to view one of the Contacts,
touch the picture. The detail view screen
will be displayed.
Shortcut
Add your favorite menu on the standby
screen.
Ź
Touch from the standby
screen.
Ź
Touch to edit the shortcuts.
Shortcuts
Ź
Touch
Add
to add another application,
touch to delete the application from
Shortcuts, or touch
Done
to finish.
37
Your Standby Screen
Annunciator Bar
With your phone's Annunciator bar, you can
quickly connect to the Music Player, Bluetooth
service and more.
Touch the top side of the standby screen.
Ź
You can use the Music Player or turn on
Bluetooth.
Ź
You can set your profile by touching
and choosing from Ring, Ring and
Vibration, Ring after Vibration, Silent,
or Vibration.
38
Touch in the standby screen to open the Main Menu. From here you can access the
following menus: Phone, Multimedia, My Stuff and Settings
Menu Tree
Phone
Dialing
Address Book
Recent Calls
Messaging
Mobile Email
YPmobile
AT&T GPS
myAT&T
Settings
Call
Sound
Display
Phone
Bluetooth
Connection
Application
More
My Stuff
AT&T Social Net
Audio
Pictures
Video
Tools
Clock
File Manager
Other Files
Multimedia
AT&T Code Scanner
Mobile Web
Shop Music
AppCenter
Music Player
App Manager
Games & Apps
Camera
39
This section includes functions related
to SMS (Short Message Service), MMS
(Multimedia Message Service), Voicemail as
well as the network’s service messages.
New Message
1. From the standby screen, touch .
2. Touch Create New Message.
Editing a message
The following options are available when
editing a Message.
Ź
Symbol: You can insert symbols ranging
from sentence notes to emoticons. Touch
the twice and you can select the
symbols you want. You can use Previous
and Next to scroll through the various
pages of symbols.
Inserting Multimedia Files
Inserting Multimedia files in outgoing
messages is easy. While editing a message,
press and select an option from below:
Ź
Picture: You can preview the selected
picture. Touch to insert the selected
picture.
Ź
Audio: You can insert from your saved
Audio files.
Ź
Video: You can insert from your saved
Video clips.
Ź
Slide: Allows you to add another slide to
the message.
Ź
Take New Picture: You can insert a new
image taken from the camera by pressing
the Camera Key or touching .
Note
Refer to page 61 for camera options.
Messaging
40
Ź
Record New Audio: You can record a
new audio clip by touching .
s Recording mode: MMS mode will limit
the recording length so that it can be
sent by MMS. General mode will record
as long as memory is available.
s
Quality: Choose from Normal, Economy,
or Fine. The higher the quality, the larger
the file.
Ź
Record New Video: You can record a
new video.
Ź
More: Allows you to insert a Template,
vCard, vCalendar, vNote, vTask or Contact.
Note
vCard, vCalendar, vNote, vTask and Contact are
created by the Address Book, Calendar, Notepad
and Tasks functions. Go to the corresponding
sections for more detailed information.
Using Options
While entering a text message, touch
Options to use the options below.
s Text Entry Settings
- Language: Allows you to set the text
entry language to English, French,
Spanish, or Korean.
- Show/Hide Candidate: When in T9
Entry Mode, you can see the word
candidates as you type.
- Show/Hide Next Word: Allows you to
see the next word as you type.
- My Dictionary: Allows you to manage
the words in the Dictionary.
s Copy & Paste: Allows you to copy text
and paste it in a text field.
s Preview: Allows you to preview your
message.
s View attachment: Allows you to view the
message’s attachment.
s Save to Drafts: Saves the selected
message to Drafts.
s Remove Elements: Allows you to remove
elements from the message.
Messaging
41
Messaging
s Slide Settings
- Duration: Allows you to set the duration
of the slide presentation.
s Writing Font Size: Set the writing Font
size to Small, Medium and Large.
s Cancel Message: Allows you to exit
the Message without saving your input
message.
Sending a Message
After completing a message, select Send To
to select recipients.
s %NTERTHERECIPIENTS7ITHOptions ,
you can choose an option from below.
- Enter Number: You can input the
recipient(s) number using the touch
keypad or QWERTY keyboard.
- Enter Email: You can enter an Email
address instead of a phone number.
- Caller Groups: Choose a contact from
your Groups.
- Recent Recipients: Choose a contact
from recent messages.
- Recent Calls: Choose a contact from
recent calls.
- Delivery Options: Allows you to set
Add Cc and Add Bcc.
- Save to Drafts: Saves the selected
message to Drafts.
- Cancel Message: Allows you to cancel
the message.
Message folders
The folder structure on your LG-C410 was
designed to be fast and easy to use.
Ź
Inbox: All the messsages you receive are
placed into your Inbox.
Ź
Drafts: If you don’t have time to finish
writing a message, you can save it as
a draft.
Ź
Outbox: All Sending and Sent messages
are placed into your Outbox.
42
Messaging
Ź
Note
If you see the message “Message box full.
Delete old messages.”, then you should delete
some messages from your Inbox.
Inbox
You will be notified when you receive a
message. They will be stored in the Inbox. In
the Inbox, you can identify each message by
icons. To reach the Inbox, from the standby
screen, touch .
The following options are available in the
Inbox folder when you touch .
Ź
Delete: You can pick a message and
delete it.
Ź
Sort By: You can sort all messages by
Date, From Read/Unread and Subject.
Ź
Standard/Conversation View: You can
select between the two viewing modes.
Ź
Delete All Read Messages: You can
delete all read messages.
Ź
Message Settings: Allows you to set
messaging settings.
The following view modes are available for
your Inbox.
Conversation View
This mode allows you to view all messages
with each contact in conversational order.
Touch a conversation to expand messages (to
display each message in its entirety). Touch
it again to only see the first 2 lines of each
message.
Standard View
Allows you to view messages individually.
When viewing a message, the following
options are available in standard view:
Ź
Add to Address Book: You can save the
sender’s phone number in the Contact List.
Ź
Select Slide: If the multimedia message
has more than one slide, you can select
and move to the desired slide.
43
Messaging
Ź
Extract Data: You can make a voice call or
send a message. You can save the number
As New contact or Updating Existing.
Ź
View Attachment: Allows you to view the
message’s attachments.
Ź
Copy to SIM/Phone: Allows you to copy
the message to the SIM card or the phone.
Ź
Move to SIM/Phone: Allows you to move
the message to the SIM card or the phone.
Ź
Message Details: You can view
information about received messages;
message Type, Subject, Sender’s address,
and message Time.
Drafts
You can view the messages saved as drafts.
To see the Drafts folder, touch from the
standby screen, then touch Inbox and touch
Drafts from the drop-down menu.
Outbox
The Outbox is a place where you can find
your sent messages. To see the Outbox folder,
touch from the standby screen, then
touch Inbox and touch Outbox from the
drop-down menu.
When you press the Send Key , you
can make a call to the number of the recipient
number of the selected message.
If a message is not successfully sent, you
will receive a Message Sending Failure
notification on the screen. Another attempt
will be made to send the failed message and
after two unsuccessful attempts, the message
will no longer be sent automatically. In order
to send the message that has failed, you must
touch
Resend
to resend the message.
The Outbox will display all failed, sent and
pending messages in the order in which they
are sent. Touch Options to use options
available from the Outbox.
Ź
Delete: Deletes a message you choose.
Ź
Sort by: Sorts by Date, To and Subject.
44
Messaging
Ź
Message Settings: Allows you to set
messaging settings.
Ź
Delete All: Delete all messages.
The following options are available when
you select a message in Outbox and touch
Options .
Ź
View Status: Shows the message status.
Ź
Select Slide: If the multimedia message
has more than one slide, you can select
and move to the desired slide.
Ź
View Attachment: To view the message
attachment.
Ź
Copy to SIM/Phone: Allows you to copy
the message to the SIM card or the phone.
Ź
Move to SIM/Phone: Allows you to move
the message to the SIM card or the phone.
Ź
Message Details: Allows you to view the
message information.
Voicemail
If provided by your network, callers can leave
you messages if they call and you don’t
answer.
To access from the standby screen, touch
, then press and hold down .
Note
Please check with your network service provider
for details of their service in order to configure
the handset accordingly.
Message Settings
To configure Messaging settings, touch
from the standby screen, touch Options
, then select Message Settings for the
following options.
Message Alert
You can set the Sounds, Volume, Alert Type,
and Alert Interval.
45
Messaging
Save To
Choose a default save location between
Phone and SIM Card.
Signature
This feature allows you to create your
signature.
Text Message
Ź
Text Templates
There are 6 predefined messages in the
list. You can view and edit the template
messages or create new ones.
The following options are available when
you touch Options .
- Delete: Allows you to delete the
selected template message.
- Delete All: Deletes all text message
templates in the folder.
To edit an existing Template, touch it
(to open) then touch the text. The Edit
Template screen will automatically open.
Ź
Message Center Number: The details for
the Message Center are pre-loaded onto
your handset and should not be changed.
Ź
Email Gateway: The details for the Email
Gateway are pre-loaded onto your handset
and should not be changed.
Ź
Insert Signature: Insert signature you
created.
Multimedia Message
Ź
Multimedia Templates: Multimedia
templates are available and can be created
here.
Ź
Download Options
- Download Without Ask: Allows
Multimedia Messages to be downloaded
automatically.
- Ask Always: You can download a
multimedia message manually.
- Discard: Used when the user rejects
download of the Multimedia Message.
Ź
Message Center: The details for the
Multimedia gateway are pre-loaded onto
your handset and should not be changed.
46
Messaging
Voicemail Number
This menu allows you to set the voicemail
center number if this feature is supported by
AT&T. Please check with AT&T for details of
their service in order to configure the handset
correctly.
Service Message
You can set the Service option to determine
whether or not you will receive service
messages.
Mobile Email
Mobile Email allows you to access your
Yahoo! Mail, AOL Mail, AIM Mail, Windows
Live Hotmail, AT&T Mail, Gmail and other
providers accounts on your phone. So now you
can quickly and easily check your email while
you are away from your computer.
To Set Up Mobile Email
Ź
Open Mobile Email: From the standby
screen, touch , and touch .
Ź
Select an Email Provider: Touch the
email provider you wish to use.
Ź
Read and Accept the Terms of Use
Ź
Log In
1. Touch the email address field and type
in your existing email address.
2. Touch the Password field and enter your
password.
3. To save your password scroll down to
Remember Password and select it
and check the box.
4. Touch Sign In.
Ź
Opening an Email: Scroll down and
touch the message you want to open to
highlight it. Then touch it again to open the
message. When the email is open, select
Options to reply, forward or delete.
Ź
Deleting an Email: Scroll down to the
email you want to delete, touch the subject
line to highlight it, touch Options, and
then Delete. Touch Delete once more to
confirm.
47
From the standby screen, touch , then
touch to access AT&T GPS.
The AT&T Navigator application on your
device uses GPS position determination
technology and access to your carrier’s data
network to provide you with driving directions
and a host of other services, including:
Ź
GPS navigation that gives you turn-by-turn
directions to any destination address in
the continental United States. If you miss
a turn or get off-track, AT&T Navigator
will calculate a new route for you. You can
enter a destination address by using AT&T
Navigator’s automatic voice recognition
system or by typing on the device’s keypad.
Ź
Audio and visual traffic alerts while
driving or viewing maps, as well as traffic
re-routing capabilities to minimize delays
on your trip.
Ź
A Search feature that allows you to find
businesses or points of interest near your
current location, an airport, a waypoint,
or any other entered address. You can
read ratings and reviews for businesses
and easily call the business that you have
found to check on the availability of an
item or to make a reservation. You can
navigate to the business location now or
save the address for later use.
Ź
Maps of the area around your current
location, around a marked waypoint, or
around an address that you had previously
entered. You can pan the map (adjust left,
right, up, or down) and zoom in or out.
You can also mark a point under the cursor
as a waypoint.
Ź
A compass-like indicator presenting your
direction of travel, location, and speed.
AT&T GPS
48
Ź
The ability to personalize your application
preferences by selecting U.S. customary
or metric distance units, the language for
audible guidance, and so on.
You can also use many of AT&T Navigator’s
features on the TeleNav website, such as
getting driving directions (Route Planning) and
using the Search function to find businesses,
churches, schools, and government offices.
You can also use the TeleNav website to add
an address to your My Favorites list, manage
your My Favorites and Recent Places lists, and
shop at the TeleNav Store.
Notes
For best GPS performance
s)NORDERTOIMPROVE'03ANTENNASENSITIVITY
do not cover the GPS antenna area of the
device.
s9OUR'03ANTENNASENSITIVITYMIGHTBE
weakened if you are in a high rising building,
underground, or location surrounded by metal
or concrete.
s5SENEARTHEWINDOWINDOORSFORBETTER'03
antenna sensitivity.
s&ORBATTERYDURABILITYPLEASEUSEVEHICLE
power adapter in your car.
s)TCOULDTAKE^MINUTESTOGETYOUR'03
position depending on the condition of the
environment or network.
AT&T GPS
49
From the standby screen, touch , then
touch to access YellowPages.com.
Unleash the power of YellowPages.com local
search on your mobile phone.
Find a business, get maps and directions,
and save your favorites: our mobile app gives
you what you need, whenever and wherever
you need it.
Ź
Search for local businesses.
Ź
View ratings and call businesses.
Ź
Save businesses for future access.
Ź
Get maps and view step-by-step directions.
* For more information, refer to
www.yellowpages.com
YPmobile
50
This application connects you to the Internet.
By default, the account connects you to
AT&T’s homepage.
Mobile Web is one of the services provided by
AT&T and it gives you access to all the cool
things you can do with your wireless phone.
Note
Check the availability of WAP services, pricing
and tariffs with your network operator and/or
the service provider whose service you wish
to use. Service providers will also give you
instructions on how to use their services.
Please contact your service provider to open an
Internet account.
Launch the Browser
To launch the browser from the standby
screen, touch , , and then . You
can also access Mobile Web from the Qwerty
keyboard by pressing .
Once connected, the homepage is displayed.
To exit the browser at any time, press the End
Key .
Menus for the Browser
You can surf the Internet using either the
phone keys or the Browser menu.
Using the Navigation Keys
When surfing the Internet, the navigation keys
function similarly from when the phone is on
standby mode.
Using the Browser Menu
Online menu
Once you are connected to the Internet, the
following menu options are available when
you touch Options :
Ź
Home: Moves to the initial homepage.
Ź
Windows: You can have several browser
windows to navigate different web pages
at the same time.
Ź
Enter URL: Connects to the specific URL
after editing.
Ź
Bookmarks: You can add or save the
current page to Bookmark or view the list
saved under Bookmark.
Mobile Web
51
Mobile Web
Ź
Landscape View: Allows you to view
broad web pages easily.
Ź
View Full Screen: View current page in
full screen.
Ź
Back: Allows you to go back to the
previous page.
Ź
Forward: Allows you to revisit the page
you viewed prior to going back.
Ź
Search Text: You can search the text
what you want to find.
Ź
Recent Pages: Allows you to see a list of
recently visited web pages.
Ź
Send URL: Allows the current page URL
via SMS to another person.
Ź
Settings: Allow you to set options such as
Cache, Cookie and other Browser Settings.
Ź
Browser Help: Opens Help Overview
to help make your browsing experience
easier.
Ź
Exit: Exits the browser.
52
To launch AppCenter while in the standby
screen, touch , , and then touch .
Home
Displays the AppCenter home page.
Search
Allows you to search for applications, games,
music, and much more.
Categories
Allows you to easily browse for media
through categories.
Account
Allows you to view your current apps, change
your purchase confirmation, and read the
privacy policy.
Note
Additional charges may incur when
downloading any media files. Contact AT&T for
additional information.
AppCenter
53
Music Player
To launch Music Player while in the standby
screen, touch , , , and select
Music Player.
Ź
All Songs: You can view all the songs in
your music library.
Ź
Playlists: You can make your own
playlists.
Ź
Artist: Shows the list of artists of all the
songs in your music library, and shows all
the songs by a chosen artist.
Ź
Album: Shows the list of albums of all the
songs in your music library, and shows all
the songs on a chosen album.
Ź
Genre: Shows the list of genres of all the
songs in your music library, and shows all
songs of a specific genre.
Ź
Shuffle: Allows you to play all the songs
in your music library with shuffle.
Ź
Favorites: Allows you to play your favorite
songs.
Note
Copyrights of music files may be protected by
copyright and intellectual property laws. Please
ensure that you adhere to the applicable Terms
of Use of materials laws prior to downloading
or copying files.
Playing Music
To listen to music in your phone or the
external memory, follow these quick easy
steps:
1. From the standby screen, touch , then
open the Multimedia tab by touching
and touch .
2. You can select from All Songs, Playlists,
Artist, Album, Genre, Favorites, and Shuffle
songs to select your Music. The Now
Playing menu will be only available when
music is playing.
Music Player
54
Music Player
Playlist
Repeat
Shuffle
Minimize
Favorite
Volume
Ź
Touch the song you wish to play.
Ź
Touch to pause the selected song.
While playing, touch to adjust the
volume. Touch and to skip to
the next song or previous song.
Ź
Touch to Minimize the music player
and access other phone functions while
music is playing.
Note
Files under 300 kb may not be displayed in this
function and may be categorized as Ringtones.
Adding Music To Your Handset
Music files can be added to your handset by
using one or more of the following methods:
Ź
Download music and ringtones over the
AT&T network directly to your device
via the Shop Music link in the AT&T
Multimedia menu.
Ź
From your existing digital media collection
on your PC via Windows Media
®
Player
and/or Windows Explorer.
55
Music Player
Ź
From your PC using other music
subscription services, such as Napster or
Rhapsody.
Note
In order to effectively store all your music files
on your SD card, it’s important to ensure that
there is enough free space available remaining
on the SD card to support file transfer. If there is
not enough free space on the SD card, this may
result in transfer failures or lost data.
(The maximum number of music files that the
handset can support is 2000.)
A 512 MB card requires up to 3 MB of free
memory.
A 4 GB card requires up to 6 MB of free
memory.
A 8 GB card requires up to 15 MB of free
memory.
A 16 GB card requires up to 25 MB of free
memory.
Purchasing and downloading
Music directly to your Device
1. From the standby screen, touch ,
and then .
2. Select Shop Music.
3. Navigate the Shop Music page to
download today’s hottest music, ringtones
and other personalized content directly to
your phone.
Note
Some sites are data intensive (i.e. previews via
streaming) so the user should be enrolled in an
unlimited data plan before using these services
to avoid per-use data charges.
Additional charges may apply when
downloading music, ringtones etc.
56
Music Player
Transferring Music using your PC
Before You Get Started
To transfer music from your PC to your device,
you will need the following:
Ź
Windows Media
®
Player 10 (or above) or
other digital music management software
such as Napster or Rhapsody.
Ź
A microSD™ card*
(supports up to 32 GB cards)
Ź
USB data cable*
* microSD™ card and USB data cable sold
separately; go to att.com/wireless for
details.
Note
This device is not compatible with iTunes and/
or iTunes files.
Transferring Music from the
Digital Music Service
1. Using your computer, open your preferred
PC music management client.
2. Download the selected song to your library.
3. Make sure the microSD™ card is inserted
properly into the handset.
4. Use the USB data cable to connect the
handset to the PC.
5. Once the USB connection has been
established, the handset displays
“Connected.” and the computer screen
then shows the LG-C410 device. If the
detection does not occur, skip to the
Changing USB Connection Setting
section on page 58.
6. Follow the instruction in the program to
transfer music to your handset.
Note
If you have a USB hub, connect the handset
directly to your computer rather than through
the hub.
57
Music Player
Transferring Music using
Windows Media Player
1. Open Windows Media
®
Player on your
computer (version 10.0 or higher).
2. Use the USB data cable to connect the
handset to the PC.
3. Once the USB connection has been
established, the handset displays
“Connected.” and the computer screen
then shows the LG-C410 device.
Note
If the target computer does not detect the
newly connected handset or provide an MTP
Player dialog window on the PC screen, skip to
Changing USB Connection Settings section
on page 58.
4. From within the Windows Media
®
Player application, click on the Sync tab.
Previously downloaded songs are then
listed on the left side of the application.
5. Choose the destination location for the
media files. The LG-C410 Music Sync
Player appears in a drop-down list on the
right side of the screen.
Note
If there are no items present in the playlist,
click the Edit Playlist button and begin adding
the music files from among the various media
categories.
6. Drag the songs to the Sync tab and click
the Start Sync button to download the
selected songs to your handset.
A “synchronization in progress” message
appears on the application. Do not unplug
the handset during this process. Once
complete, the progress bar will disappear.
7. It is now safe to unplug the USB connector
from the handset once synchronization is
complete.
58
Music Player
Drag and Drop Music Using
LG-C410 As A Mass Storage
Device
1. Make sure the microSD™ card is inserted
properly into the headset.
2. Connect the device to a PC using a
LG-C410 USB data cable.
3. A bubble may appear on the PC, “Found
New Hardware LG USB Modem”.
4. Access My Computer on the PC.
5. The phone’s memory card will be listed
under “Devices with Removable Storage”
in the same location as an optical drive.
Note
The PC will automatically assign a drive letter.
6. Explore through the files in a new window
for the desired music files.
7. Drag and drop the desired music content
from the PC window to the “Storage Card”
window.
8. Disconnect the device from the USB cable.
9. Access the Music Player on the phone.
Note
If the target computer does not detect the
newly connected handset as Mass Storage,
skip to Changing USB Connection Settings
section below.
Changing USB Connection
Settings
1. From the standby screen, touch and
.
2. Select Connection.
3. Touch USB Connection Mode.
4. Touch Music Sync (if using Windows
Media
®
Player or other Digital Music
Services) or Mass Storage (if you are
going to drag or drop files).
5. Reconnect the device to a PC.
59
Music Player
Deleting Music Files
The following are the three options available
to delete music from your phone:
1. Delete a file using Mass Storage, but not
using the Music Sync function.
2. Delete a file by directly inserting the
microSD™ card into the PC.
3. Delete a file using delete function on the
phone.
Note
If you delete a playlist from the phone, the
songs in the playlist will not be removed and
remain in the All Songs folder.
Execute your file operations like Delete, Move
and Copy using Music Sync.
Be aware that all of the existing data will be
erased on microSD™ card if you use the below
process.
s5SETHE-EMORY#ARDFUNCTIONINTHE3ETTINGS
menu (Menu > Settings > Phone > Reset
Settings > Master Clear > Memory Card).
s&ORMATEXTERNALMEMORYUSING-ASS3TORAGE
Additional Music Services
There may be other AT&T music applications
preloaded or available for your phone that
allow you to:
Ź
Identify the name, artist and album to a
song from a song sample.
Ź
Listen to the latest Hip Hop, R&B, Rock,
Jazz, or Country streaming commercial-free
radio channels, anywhere you go.
Ź
View the latest music videos.
Ź
View music news and information.
Ź
Cut custom-made ringtones from the
favorite parts of your favorite songs, etc.
Note
Some sites are data intensive (i.e. previews via
streaming) so the user should be enrolled in an
unlimited data plan before using these services
to avoid per-use data charges.
Additional charges may apply for downloading
content or use of these services.
60
App Manager
Allows you to download and use useful and
entertaining applications.
To access the App Manager from the standby
screen, touch , , and then .
Games & Apps
Allows you to download and play games and
use applications to your enjoyment.
To access Games & Apps from the standby
screen, touch , , and then .
Camera
From the standby screen, touch , , and
then to access the Camera function.
Take Photo
Using the camera built into your phone, you
can take pictures of people or events while on
the move. Additionally, you can send photos
to other people in a picture message.
Press the Camera Key to go to
Camera Mode directly. Or choose from
the tab. Then select Take Photo. You
can also take video by pressing and holding
the Camera Key to open the
Camcorder Mode.
Multimedia
61
Multimedia
Getting to know the viewfinder
Camera mode: Indicates that camera
mode is selected.
Image Size: Displays the current
image size.
Back: Touch here to exit camera mode or return to the previous screen.
Camcorder: Toggle between camera to
camcorder mode.
Album: Allows you to view your picture
album.
Zoom: Allows you to zoom in and out.
Image Size: Allows you to change the resolution of the image.
Settings: Touch this icon to open the settings menu. See the Settings Menu section
on page 62 for details.
Brightness: Allows you to set the brightness level.
Capture: Takes the picture.
Note
The shortcut options disappear after a few seconds automatically.
To recall the options, touch the screen again.
62
Multimedia
Settings Menu
Ź
White Balance: Allows you to set the
white balance to Auto, Daylight, Cloudy,
Illuminate, or Indoors.
Ź
Night mode: Choose to turn Night mode
On or Off.
Ź
Shot Mode: Choose from Normal and
Continuous Shot.
Ź
Color Effects: Set the Color Effects to Off
(Color), Mono, Sepia, Negative, or Blue.
Ź
Timer: Set the Timer to Off, 3 Seconds,
5 Seconds, or 10 Seconds.
Ź
View Mode: Choose between Full Image
and Full Screen.
Ź
Shutter Tones: Can be set to Tone 1,
Tone 2, Tone 3, or Off.
Ź
Primary Storage: Choose to save a photo
to Phone or Memory Card.
Ź
Reset Settings: Allows you to set to the
default settings.
Note
In Take Photo mode, you can adjust the zoom
scale by moving the slider. The maximum zoom
levels depend on the resolution as follows.
Resolution Zoom scale
2M (1600x1200) Level 1
1M (1280x960) Level 1
VGA (640x480) ,EVEL^,EVEL
QVGA (320x240) ,EVEL^,EVEL
63
Multimedia
Record Video
When recording video, you have many of the same Settings options as with taking a photo.
Getting to know the viewfinder
Video mode: Indicates that camcorder
mode is selected.
Video Size: Displays the current video
size.
Back: Touch here to return to the standby screen.
Record: Starts recording the video.
Album: Allows you to view your video
album.
Zoom: Allows you to zoom in and out.
Duration: Allows you to select one of the recording duration presets. Choose from
Normal and MMS.
Settings: Touch this icon to open the settings menu.
Brightness: Allows you to set the brightness level.
Camera mode: Change from camcorder
to camera mode.
64
Multimedia
Settings Menu
Ź
White Balance: Allows you to set the
white balance to Auto, Daylight, Cloudy,
Illuminate, or Indoors.
Ź
Color Effects: Set the Color Effects to Off
(Color), Mono, Sepia, Negative, or Blue.
Ź
Video Size: Sets the size of video to
QVGA (320x240) or QCIF (176x144). The
selected size appears on the camcorder
screen.
Ź
Primary Storage: Choose to save a video
clip to Phone or Memory Card.
Ź
Recording Tones: Set Recording Tones
On or Off.
Ź
Reset Settings: Allows you to set to the
default settings.
Note
In Video Record mode, you can adjust the zoom
scale by moving the slider. The maximum zoom
levels depend on the resolution as follows.
Resolution Zoom scale
QVGA (320x240) ,EVEL^,EVEL
QCIF (176x144) ,EVEL^,EVEL
Album
You can view the Album containing your
Pictures and Videos. To view the available
options, touch .
Back: Goes back to previous menu.
Send Via: You can send the picture or
video via Message or Bluetooth.
Sort By: You can sort the pictures and
videos by date, type, name, of favorite.
Slide Show: Plays a slide show of your
images.
More: The following additional options
are available: Favorite, Print via
Bluetooth, Delete, or Delete All.
65
AT&T Social Net
Allows you to stay connected to friends,
family, and coworkers via Facebook, MySpace,
and Twitter. It also keeps you up-to-date on
the latest news, sports, and entertainment.
To access AT&T Social Net from the standby
screen, touch , , and then .
Audio
From the standby screen, touch , , and
then to access the Audio menu.
Ź
Voice Recorder: Allows you to record
your own audio.
Ź
The available pre-loaded audio files will
be displayed.
Pictures
From the standby screen, touch , , and
then to access the Pictures menu.
Ź
Take Picture: It starts up camera mode
and allows you to take pictures.
Ź
Make Animated GIF: You can make an
animation file with the selected images
in the list.
Ź
The available pre-loaded image files will
be displayed.
Video
From the standby screen, touch , , and
then to access the Video menu.
Ź
Record Video: You can record your own
video.
Ź
The available pre-loaded video files will
be displayed.
Note
DRM sometimes restricts some functions, such
as sharing.
My Stuff
66
My Stuff
Tools
From the standby screen, touch , , and
then to access the Tools menu.
Voice Recorder
Use the Voice Recorder to record voice
memos or other sounds.
Ź
Settings
s Recording Mode: MMS record mode
shortens the time so that the recording
can fit in an MMS message and General
mode provides longer recording time.
s Quality: You can assign the default
quality to the Normal, Economy or Fine.
s Storage: You can assign the default
storage to the phone memory or memory
card.
Ź
Touch to start recording.
Touch to pause recording. To
continue recording, touch . To stop
recording, touch . The recording
will be saved automatically.
Ź
To start a new recording, touch
.
Ź
To play the recording, touch
.
Ź
To send the recording by Message or
Bluetooth, touch or .
Ź
To delete the recording, touch and
confirm by touching Yes.
67
My Stuff
Voice Command
Voice Command is the function whereby
your phone’s voice recognition engine
identifies the voice of the user and carries
out the requested commands. When the user
operates the Voice Command function, there
are five possible commands, Call <Name
or No.>, Listen Voicemail, Missed Calls,
Messages, and Time & Date.
1. Call <Name or No.>: This function is
activated only when the user says the
command “Call” followed by the name
stored in the Address Book or specified
phone number. The voice engine inside the
handset recognizes the user’s utterance
and displays name lists or phone numbers
from the phone’s Address Book. However,
interfering noise might cause a problem
displaying candidates. Additionally, the
user has the option to superimpose a
number type at the end, such as “mobile”,
“home” or “work”.
2. Listen Voicemail: This command is
activated when the user says the words
“Listen Voicemail”. The user will then be
automatically connected to voicemail.
3. Missed Calls: This command is activated
when the user says the words “Missed
Calls”. The mobile phone presents the
missed calls lists.
s #OMMANDSAVAILABLETOUSER
- Yes: Dials the phone call.
- No: Moves to the next missed call on the
list.
- Cancel: Returns to the main Voice
Command menu.
- Exit: Terminates Voice Command.
- Next: Moves to the next missed call on
the list.
4. Messages: This command is activated
when the user says the word “Messages”.
The phone displays details of unread text
or multimedia messages.
68
My Stuff
s #OMMANDSAVAILABLETOUSER
- Yes: Dials the phone call.
- No: Moves to the next unread message.
- Cancel: Returns to the main Voice
Command menu.
- Exit: Terminates Voice Command.
- Next: Moves to the next unread
message.
5. Time & Date: This command is activated
when the user says the words “Time &
Date”. The phone displays the current local
time and date.
6. Play Music: This command is activated
when the user says the words "Play
Music". The phone plays the songs in the
music list.
The Voice Command function also has options
accessible by touching Options when in
the Voice Command screen. They are:
s -ODE
- Speed: Voice Command is abbreviated.
- Normal: Voice Command is played
normally.
s "EST-ATCH
- 1 Match: The most likely match will
be displayed to find a number from the
Address Book.
- 4 Matches: The four most likely matched
names will be displayed to find names
from the Address Book.
s 3ENSITIVITY
- High: Operation and performance of
the voice recognition engine is rarely
affected by the user’s voice command and
surrounding sound.
- Medium: Operation of voice recognition
engine is normally affected by user’s
voice command and surrounding sound.
- Low: Operation of voice recognition
engine is strongly affected by user’s voice
command and surrounding sound.
69
My Stuff
s 3PEAKERPHONE-ODE
- Automatic On: When this option is
selected, sound is heard through the
speakerphone and is loud enough so you
can hear the output when the phone is
away from the ear, at a distance.
- Off: When this option is selected, sound
is quieter and can only be heard through
the Earpiece.
s #ALL!LERT
- Ring Only: Rings repeatedly when you
receive a call.
- Ring After Name: Tells the name of the
contact you saved once and then rings
repeatedly when you receive a call.
- Name Repeat: Tells the name of the
contact you saved repeatedly when you
receive a call.
Calendar
When you enter this menu, a calendar will
be displayed. The red square cursor is used
to display the selected day. The bottom bar
on the calendar indicates schedule(s) for that
day. This function helps to remind you of the
schedule. The phone will sound an alarm tone
if it has been set for a specific schedule item.
The following options are available when
you open the Calendar function and touch
Options .
Ź
New Schedule: Allows you to add a new
schedule on the date you select.
Ź
Search: Allows you to search the saved
schedule(s).
Ź
Set Holiday: Allows you to set your
personal holiday for the selected date.
Ź
View All: Allows you to view all saved
schedules.
Ź
Week View: Allows you to change
Calendar view mode to Month View or
Week View.
70
My Stuff
Ź
Go to Date: Allows you to jump to a
specific date.
Ź
Selective Delete: Allows you to delete
Old Schedules or All Schedules selectively.
Ź
Settings: Allows you set Default View and
Weekly Begin day.
Notepad
You can create up to a maximum of 30
memos.
1. From the standby screen, touch , ,
, and choose Notepad.
2. To create a new Note, touch New Note,
input the memo and touch
Save
to save.
World Clock
The World clock function provides time
information for major cities worldwide.
To add a new City
1. From the standby screen, touch , ,
and touch the World Clock tab at the
bottom of the screen.
2. Touch New City.
3. Scroll up and down to select the desired
city.
Ź
To make it easier, touch and a map will
be displayed. Touch the map preview at the
top right corner of the screen and choose
city you want to know the time of.
Note
The first time you use this function, you will be
asked to enter the name of your current City.
Tasks
This feature allows you to save and manage
a task.
To add a New Task
1. From the standby screen, touch , ,
and select Tasks.
2. Touch New Task.
3. Enter the Due Date, Note and Priority for
the new task.
4. Touch Save to save the task item.
71
My Stuff
The following options are available by
touching Options in the main Tasks
menu:
Ź
New Task: Allows you to create a new
task.
Ź
Delete: Allows you to delete any tasks
created.
Ź
Delete All: Allows you to delete all tasks.
Ź
Send Task Via: Allows you to send tasks
via Text Message, Multimedia Message,
and Bluetooth.
Ź
Sort By: Allows you to sort tasks by Date,
Status, and Priority.
Ź
View Calendar: The calendar window
will display, from there you will be able to
create new tasks.
Stopwatch
This menu allows you to record the elapsed
time of an event. The duration of an individual
lap time (up to 99 times) and the total time
can also be displayed.
Ź
New Time
1. From the standby screen, touch ,
, and touch the Stopwatch tab
at the bottom of the screen.
2. Select New Time.
3. To start timing, touch
Start
.
The running time is displayed as
HH.MM.SS.hh (hours, minutes, seconds,
hundredths of a second).
4. During the timing, you can record an
individual lap time by touching
Lap
.
Up to 99 lap times can be recorded.
5. You can stop timing by touching
Stop
or restart by touching
Resume
.
6. To reset the stop watch, touch
Reset
.
Ź
Saved Times: You can see the saved
recorded times.
Ź
Show Last: Displays the last time taken
with the Stopwatch.
72
My Stuff
Calculator
The calculator function allows you to calculate
simple mathematical equations.
To access the Calculator
1. From the standby screen, touch , ,
and select Calculator.
Tip Calculator
This feature allows you to quickly and easily
calculate the tip amount based on the total
bill as well as the split of the total bill based
on the number of people.
To access Tip Calculator
1. From the standby screen, touch , ,
and select Tip Calculator.
Unit Converter
This function converts any measurement into
a unit you want.
There are 7 types of units that can be
converted: Currency, Area, Length, Weight,
Temperature, Volume and Velocity.
To access Unit Converter
1. From the standby screen, touch , ,
and select Unit Converter.
Clock
The alarm clock function allows you to set
up multiple separate alarms. You can set the
time, repetition interval and desired alarm
tone.
To set a New Alarm
1. From the standby screen, touch , ,
and then .
2. Select New Alarm.
3. Configure the following settings:
Ź
Time: Input your desired alarm time by
specifying the hour and minutes. If the time
is in the 12 hour format, you have to select
either or by touching it.
You can also choose a predefined amount
of time (15 Minutes Later, 30 Minutes
Later, 45 Minutes Later, 1 Hour Later, Off).
Ź
Repeat: Select the desired repeat mode
FROM/NCE$AILY-ON^&RI3AT^3UN
Select Weekday, and Except Holiday.
73
My Stuff
Ź
Alarm Tone: Select the desired alarm tone
to use for the set alarm.
Ź
Alarm Volume: Allows you to adjust the
alarm volume.
Ź
Alert Type: Select the desired Ring Alert
Type.
Ź
Memo: Input alarm name.
Ź
Snooze Interval: You can set the snooze
interval at 5 Minutes, 15 Minutes,
30 Minutes, 45 Minutes, 1 Hour, or Off.
4. Touch Save to save your alarm.
Quick alarm
In the Alarm Clock menu, touch Quick Alarm
to set a Quick Alarm.
1. Drag the bar from left to right to set the
time; 60 minutes is the maximum set value.
2. Scroll down to configure the options Alarm
Tone, Alarm Volume, Alert Type, Memo and
Snooze Interval.
3. Touch Save to save the alarm.
File Manager
From the standby screen, touch , tab,
and then to access the File Manager.
This allows you to view all types of contents
files in the internal phone memory and the
external memory card.
Touch Options for the following options:
Ź
Send Via: Send the selected file via
Bluetooth or MMS.
Ź
Delete: Allows you to delete the selected
file.
Ź
Move: You can move selected files to the
Phone Memory or Memory Card.
Ź
Copy: You can copy selected files to the
Phone Memory or Memory Card.
Ź
New Folder: Allows you to create a new
folder manually.
Ź
Sort By: You can sort the folders by name,
date, and type.
74
My Stuff
Ź
Delete All: You can delete all files and
folders.
Ź
Rename: You can edit the name of the
selected file.
Note
Limits: System files/folders cannot be listed.
Other Files
When you receive files of an undefined format
(such as .vcs, .vcf, etc.) via email, the files are
saved in this folder.
From the standby screen, touch , and
then to access the Other Files menu.
The following options are available when you
touch Options .
Ź
Send: Send the selected file via Bluetooth,
Online Locker or MMS.
Ź
Delete: Allows you to delete the selected
file.
Ź
Move: You can move selected files to the
Phone Memory or Memory Card.
Ź
Copy: You can copy selected files to the
Phone Memory or Memory Card.
Ź
Sort By: You can sort the folders by name,
date, and type.
Ź
Delete All: You can delete all files and
folders.
Ź
Used Space: You can view internal and
external memory status.
Ź
Rename: You can edit the name of the
selected file.
75
Call
From the standby screen, touch , , and
then to access the Call settings menu.
Call Forwarding
When this network service is activated, you
can direct your incoming calls to another
number, for example, to your voice mailbox
number. For details, contact AT&T. Select one
of the forwarding options, for example, select
If Busy to divert voice calls when your number
is busy or when you reject an incoming call.
The following options are available:
Ź
All Voice Calls: Diverts voice calls
unconditionally.
Ź
If Busy: Diverts voice calls when the
phone is in use.
Ź
If No Answer: Diverts voice calls which
you do not answer.
Ź
If Out of Reach: Diverts voice calls
when the phone is turned off or is out of
coverage.
Ź
Deactivate All: Turns Off all call
forwarding options so that all incoming
calls are received by your handset.
Send My Number
This network service allows you to set your
phone number to be displayed (On) or hidden
(Off) from the person you are calling. You
can select Set by Network if you prefer to
have different settings for different service
providers.
Auto Redial
If you select On, your phone redials the
number you’re trying to call up to 10 times
after you hear a quick, busy signal. Press the
End Key to stop the call attempts.
This feature attempts to redial numbers that
are engaged due to the wireless network. It
does not redial numbers to an engaged party.
Note
There will be no alert indicating the call has
been connected. You must stay on the line to
hear when the call is connected.
Settings
76
Settings
Answer Mode
This allows you to determine how to answer
the phone.
Ź
Any Key: You can answer an incoming call
by touching any key.
Ź
Send Key Only: You can only answer an
incoming call by pressing the Send Key
.
Minute Minder
This option allows you to specify whether the
phone will beep every minute during a call to
keep you informed of the length of the call.
Call Waiting
The network will notify you of a new incoming
call while you have a call in progress. Select
Activate to request the network to activate
call waiting, Deactivate to request the
network to deactivate call waiting, or View
Status to check if the function is active or
not.
Call Reject
This menu allows you to turn On or Off Call
Reject for all numbers or the numbers in the
Call Reject List.
Ź
Call Reject On/Off: This feature allows
you to choose whether to reject incoming
calls or calls from specific phone numbers.
When the Reject All Calls option is set,
all incoming calls are routed directly to
Voicemail. Reject on List allows you to
enable Call Reject for the numbers saved
on your Call Reject List.
Ź
Call Reject List: Allows you to view a
list of the numbers you wish to reject and
add new numbers to the list. You have
the option of choosing numbers from your
Contacts List or new numbers.
Ź
Reject with SMS List: Allows you to
manage the list of text messages that are
used to reply to an incoming call when
rejecting it.
77
Settings
Send DTMF Tones
Allows you to manage DTMF tones. Select
from / .
TTY
Allows you to turn TTY on and off. Choose
from TTY Full, TTY Talk, TTY Hear, and TTY
Off.
Hearing Aid
Allows you to manage the Hearing Aid mode.
Select from / .
Time & Cost
You can check Call Duration and Data Counter.
Sound
From the standby screen, touch , , and
then to access the Sound settings menu.
Ringtone
Ź
Sounds: Shows and plays ring tones.
You can select your preferred Ringtone by
touching the ringtone listed.
Ź
Volume: Allows you to adjust your
Ringtone volume.
Ź
Alert Type: Supports 3 ring alert types:
Ring, Ring and Vibration, and Ring after
Vibration.
Ź
Increasing Ringtone: Allows you to
select an Increasing Ringtone type which is
played when you receive an incoming call.
78
Message Tone
Ź
Sounds: Shows and plays message tones.
You can select your preferred Message
tone by touching the message tone listed.
Ź
Volume: Allows you to adjust your new
message alert tone volume.
Ź
Alert Type: Supports 4 message alert
types: Ring, Ring & Vibrate, Vibrate and
Silent.
Ź
Alert Interval: Supports 5 message alert
interval: Once, Every 2 Min., Every 5 Min.,
Every 10 Min. and Every 15 Min.
Note
Full length music tracks cannot be set as either
ringtones or message tones.
Alert Tone
Ź
Sounds: Allows you to select a set of alert
tones. Supports 2 alert tone types:
Alert Tone 1 and Alert Tone 2.
Ź
Volume: Allows you to adjust your alert
tone volume.
Ź
Alert Type: You can select to set Alert
Tones to Ring or Silent.
Dial Readout
Select from / .
Keypad Tone
This menu option allows you to select a tone
that the phone sounds when a key is pressed.
Ź
Sounds: Allows you to select a set of
keypad tones. Supports 3 keypad tone
types: Beep, MIDI1 and MIDI2.
Ź
Volume: Allows you to adjust your keypad
tone volume.
Multimedia
This menu allows you to adjust your
multimedia volume.
Call
This menu allows you to adjust your call
volume.
Settings
79
Settings
Display
From the standby screen, touch , ,
and then to access the Display settings
menu.
Wallpapers
This menu allows you to set a picture or color
as your background. You may also choose to
have no background wallpaper.
Fonts
You can configure the font size and color
of the numbers which appear in the Dialing
screen when you make a call. You can also
set the font size for menus and lists.
Brightness
You can set the brightness of the display
screen.
Backlight Timer
Use this to set the duration of the touch
screen backlight and keypad.
Phone
From the standby screen, touch , , and
then to access the Phone settings menu.
Date & Time
Ź
Auto Update: Allows you to configure
the time and date to automatically update
according to the current local time zone.
Ź
Date Format: This allows you to enter the
day, month, and year.
ddd, MMM DD (day, month date)
MM/DD/YYYY (month/date/year)
DD/MM/YYYY (date/month/year)
YYYY/MM/DD (year/month/date)
Ź
Time Format: This allows you to enter
the current time. The time format can be
changed between 12 Hours and 24 Hours.
Languages
You can change the language for the display
text on your phone. This change will also
affect the Language Input mode.
80
Settings
Auto Screen Lock
This allows you to set the amount of time
before your screen locks automatically.
Set Flight Mode
This allows you to use only the phone’s
features that do not require the use of the
wireless network when you are in an airplane
or in places where the wireless network is
prohibited. If you set the flight mode ,
you will be prompted to confirm your selection.
After you confirm it by touching the
Flight mode icon will be displayed on the
screen instead of the network signal icon.
Ź
: You cannot make (or receive) any
calls, including emergency calls or use
other features that require network
coverage.
Ź
: Deactivates Flight Mode and
re-establishes your wireless connections.
81
Settings
Touch
You can customize the Touch settings and
change Touchscreen Feedback. When you set
Sound as Touchscreen Feedback type, you can
choose your desired sound type and adjust
its volume.
Security
Various codes and passwords are used to
protect the features and settings of your
phone. They are described in the following
sections.
Ź
Phone lock: You can use a security code
to avoid unauthorized use of the phone.
If you set phone lock to When Power
On, the phone will request a security
code whenever you switch the phone on.
If you set the phone lock to When SIM
Changed, your phone will request a
security code only when you change your
SIM Card. If you set the phone lock to
Lock Phone Now, your phone will lock
immediately.
Ź
PIN Code Request: When the PIN code
request feature is set to , you must
enter your PIN each time you switch the
phone on. Consequently, any person who
does not have your PIN cannot use your
phone without your approval.
Note
Before setting the PIN code request feature to
Off, you must enter your PIN.
Ź
Fixed Dial Number: This allows you to
restrict your outgoing calls to selected
phone numbers, if this function is
supported by your SIM Card. The PIN2
code is required.
s FDN On/Off
- : You can only call phone numbers
stored in the FDN List. You must enter
your PIN2.
- : You can call any number.
s FDN List: You can enter new FDN entries.
82
Settings
Ź
Change Codes: The Change codes
feature allows you to change your current
password to a new one. You must enter
the current password before you can
specify a new one. You can change the
access codes for: Security Code, PIN1,
PIN2
Note
Not all SIM Cards have a PIN2. If your SIM Card
does not, this menu option is not displayed.
Reset Settings
This function allows you to restore factory
settings. To do this, you need the security
code.
Ź
Master Reset: Restores the settings (e.g.:
Audio, Display, Language, Date & Time,
Bluetooth Settings) stored in the handset
memory to default values.
Ź
Master Clear: Deletes downloaded or
user created contents (e.g.: images, videos)
from the phone and the external memory
card.
s Phone
- Deletes all downloaded or user Images,
Videos and Sounds from the phone
memory.
- Deletes personal information stored
in the handset memory (e.g.: address
book, messages, tasks, alarm, Calendar
schedules) to default values.
- Restores the settings stored in the
handset memory to the default values.
s Memory Card: Deletes all contents from
the external memory card.
83
Settings
Bluetooth
From the standby screen, touch , , and
then to access the Bluetooth function
settings menu.
Your phone has built-in Bluetooth
®
wireless
technology, which makes it possible for you
to connect your phone wirelessly to other
Bluetooth
®
devices such as a hands-free
device, PC, PDA, a remote screen or other
phones. The devices registered in your phone
can only be connected one at a time.
You can have a conversation via a cordless
Bluetooth
®
hands-free phone or browse the
Internet, wirelessly connected, via a mobile
phone.
You can also exchange, for example, business
cards, calendar items and pictures.
Music playing is supported through a
Bluetooth
®
headset.
Hands-free profile
This icon appears when the hands-free
profile is used between the hands-free
device. This allows you to call using a
Bluetooth
®
connection.
A2DP profile
This icon appears when the A2DP profile
is used between the stereo headset
device and the phone. This allows you
to listen to an audio clip. A2DP is the
Advanced Audio Distribution Profile,
which provides support for streaming
either mono or stereo audio using
Bluetooth
®
.
Hands-free + A2DP profile
This icon appears when both profiles of
the hands-free and the A2DP are used
between the compatible device and
the phone. This allows you to call and
listen to an audio clip using a Bluetooth
®
connection.
84
Settings
When using each device, see the manual that
comes with the device.
Note
We recommend that your phone and the
Bluetooth® device you are communicating with
should be no more than 10 meters apart. The
connection may be improved if there are no
solid objects between your phone and the other
Bluetooth® device.
Ź
Bluetooth: This menu allows you to turn
Bluetooth On or Off.
Ź
My Visibility: This menu allows your
phone to be visible to other Bluetooth
®
devices for pairing.
Ź
Search New Device: This function
allows you to search for and add new
devices.
Ź
My Devices: This function allows you to
view the list of all devices that are paired
with your phone.
Ź
My Bluetooth Info: This menu allows you
to configure the profile for Bluetooth.
- My Device Name: Allows you to
change the handset’s name so other
Bluetooth devices trying to pair with you
can easily find it.
- Supported Services: Shows you all
services that the handset supports.
- Primary Storage: Select from Handset
and Memory Card to determine the
location of files received via Bluetooth.
To pair with another device
1. From the standby screen, touch , ,
and then .
2. Touch
Search New Device
to search for the
device you wish to pair.
85
Settings
3. If you want to stop searching, touch
Cancel
.
4. All of the devices found are displayed.
5. Touch the desired device and enter the
password. If you would like to search
again, touch
Refresh
.
Connection
From the standby screen, touch , , and
then to access the Connection menu.
USB Connection Mode
You can transfer files from a compatible PC
to the memory in your phone using the Mass
Storage. When you connect the phone to a PC
using the USB cable, this will be displayed as
a removable disk through Windows Explorer.
The USB Connection Mode determines how
your Phone will communicate with other
USB devices when they are connected with
a USB cable.
Internet Profiles
This menu shows the Internet Profiles. You
can add, delete, and edit Internet Profiles by
touching Options . However, you cannot
delete or edit default configurations provided
by AT&T.
Access Points
This menu shows the Access Points. You
can register, delete, and edit by touching
Options .
However, you cannot delete or edit default
configurations provided by AT&T.
86
Settings
Application
From the standby screen, touch , ,
and then to access the Applications
menu.
This menu allows you to adjust the settings to
the following features on the phone:
Browser
This menu allows you to customize your
Browsing experience by giving you the option
of changing the following settings.
Accounts
This includes the network information used
to connect the browser to the Internet. Select
the desired account by tapping the setting.
This will activate the account that will be
used for future connections. AT&T WAP is the
predefined account that is set as default.
The following options will be available when
you touch Options :
Ź
Delete: Allows you to delete the account.
Ź
Reset All: Allows you to delete all
accounts you have created.
Note
You cannot edit and delete pre-installed
accounts. In order to create a new account,
please fill in the network information.
Account Name: Name associated with new
account.
Homepage: Homepage URL.
Internet Profile: You can choose one from
the Internet profiles.
Note
AT&T has provided default settings regarding
account information.
Creating or editing an account requires
caution. The browser cannot connect to
the Internet if the account information is
incorrect.
87
Settings
Appearance
You can choose the settings of the browser
appearance (Text size, Encoding, Show Image,
JavaScript).
Cache
The web pages you have accessed are stored
in the memory of the phone.
Ź
Clear Cache: Remove all cached data in
the memory.
Ź
Allow Cache: Allows you to turn the
memory cache On or Off.
Note
A cache is a buffer memory, which is used to
store data temporarily, especially when it is
online.
Cookies
The information of services you have accessed
are stored in what is called a Cookie.
Ź
Delete Cookies: Allows you to delete all
stored cookies.
Ź
Allow cookies: Allows you to turn
cookies On or Off.
Clear Login Info.
Allows you to clear your registered user ID’s
and passwords.
Rendering mode
You can set the Rendering mode to Standard
or Text Only.
Security
A list of the available certificates is shown.
Ź
Certificates: You can see the list of
certificates and view them in detail.
Ź
Clear Session: Removes the secure
session.
Secure Popup
You can control the pop-up which indicates a
secure page.
Messaging
To set the message settings from standby
screen, touch , Options , and then
Message Settings.
For more information regarding Message
Settings, please refer to page 44.
88
Settings
Voice Command
This menu allows you to set various Voice
Command settings. Refer to page 68 for
details.
More
From the standby screen, touch , , and
then to access the More settings menu.
Start Up Guide
This menu will start the animated guide. This
guide will help you, using animated visuals,
quickly learn some of the functions of your
LG-C410.
Memory
Used Space
This function shows the status of the user
memory of the handset.
Ź
Phone Common: This will display the
memory currently used up in your phone
and will categorize it by types of files using
the memory.
Ź
Memory Card: You can check the current
status of the external memory card in the
Memory status menu.
Ź
Phone Reserved: This function shows the
status of the reserved memory for the user
(Text Message, Contacts, Calendar, Tasks,
Notepad).
Ź
SIM Card: This function shows the status
of the SIM Card user memory.
Set Storage Defaults
You can set Storage default for each case.
When you need to save files from Camera,
Internet Download, Bluetooth and Voice
Recorder, set Phone Memory or Memory card.
You can set each case separately or choose
the All option and set the Storage Default all
the same.
89
Settings
Software Update
The AT&T server notifies devices using a WAP
push message when new software exists.
Also the user can check for the software
update using the menu “Check for Update”.
If the new software does not exist the user
can not use this feature in 24 hours. Before
updating new software after downloading
it from the AT&T server, users can decide
whether they would like to postpone the
operation. Reminder times can be set to
30 minutes, 1 hour and 4 hours. When the
time is up, users are prompted again or users
can resume the postponed operation using
this menu at any time. The software update
can only be postponed three times and will
automatically start after the third postpone
period expires.
Phone Information
This menu is used to view Operation System,
My Numbers, Manufacturer, Model Name,
Device ID, Hardware Version, Software
Version, Language and DM Client Version
information.
90
Please check to see if any problems you have encountered with the phone are described in this
section before taking the phone in for a service or calling a service engineer.
QHow do I view the list of outgoing calls,
incoming calls and missed calls?
APress the Send Key .
QWhy is the connection inconsistent or not
audible in certain areas?
AWhen in an area with poor reception,
connection may be inconsistent and
inaudible. Relocate to another area and
try again.
QWhy won’t the LCD turn on?
ARemove the battery, then replace it. Then
turn on the power. If there is no change,
fully charge the battery and try again.
QWhy does the phone heat up?
AThe phone may get warm when there is a
very long call duration, when games are
played or even when surfing the Internet
for a long time. This has no effect upon the
life of the product or performance.
QWhy does the battery run out so quickly
during normal use?
AThis may be due to the user environment, a
large number of calls or a weak signal.
QWhy is no number dialed when an Address
Book entry is recalled?
ACheck that the number has been stored
correctly by using the Address book Search
feature. Re-store them, if necessary.
Q&A
91
There are a variety of accessories available for your mobile phone, some of which may be
sold separately. You can select these options according to your personal communication
requirements. Consult your local dealer for availability.
Travel Adapter
This adapter allows you to charge the battery. It supports
standard US 120 Volt 60Hz outlets.
USB Cable
Battery
Note
s!LWAYSUSEGENUINE,'ACCESSORIES&AILURETODOTHISMAYINVALIDATEYOURWARRANTY
s!CCESSORIESMAYBEDIFFERENTINDIFFERENTREGIONSPLEASECHECKWITHOURREGIONALSERVICECOMPANY
or agent for further enquiries.
Accessories
92
Important Information
This user guide contains important
information on the use and operation of
this phone. Please read all the information
carefully for optimal performance and to
prevent any damage to or misuse of the
phone. Any changes or modifications not
expressly approved in this user guide could
void your warranty for this equipment. Any
changes or modifications not expressly
approved by the manufacturer could void the
user’s authority to operate the equipment.
Before You Start
WARNING! This product contains chemicals
known to the State of California to cause
cancer and birth defects or reproductive harm.
Wash hands after handling.
Safety Instructions
WARNING! To reduce the possibility of
electric shock, do not expose your phone to
high humidity areas, such as the bathroom,
swimming pool, etc.
Always store your phone away from
heat. Never store your phone in settings that
may expose it to temperatures less than 32°F
or greater than 104°F, such as outside during
extreme weather conditions or in your car on
a hot day. Exposure to excessive cold or heat
will result in malfunction, damage and/or
catastrophic failure.
Be careful when using your phone near
other electronic devices. RF emissions
from your mobile phone may affect nearby
in adequately shielded electronic equipment.
You should consult with manufacturers of any
personal medical devices such as pacemakers
and hearing aides to determine if they are
susceptible to interference from your mobile
phone. Turn off your phone in a medical
facility or at a gas station. Never place your
phone in a microwave oven as this will cause
the battery to explode.
IMPORTANT! Please read the TIA SAFETY
INFORMATION before using your phone.
For Your Safety
93
For Your Safety
Safety Information
Read these simple guidelines. Breaking the
rules may be dangerous or illegal. Further
detailed information is given in this user
guide.
Ź
Do not disassemble this unit. Take it to a
qualified service technician when repair
work is required.
Ź
Keep away from electrical appliances such
as TVs, radios, and personal computers.
Ź
The unit should be kept away from heat
sources such as radiators or cookers.
Ź
] Do not drop.
Ź
Do not subject this unit to mechanical
vibration or shock.
Ź
The coating of the phone may be damaged
if covered with wrap or vinyl wrapper.
Ź
Use dry cloth to clean the exterior of the
unit. (Do not use solvent such as benzene,
thinner or alcohol.)
Ź
Do not subject this unit to excessive smoke
or dust.
Ź
Do not keep the phone next to credit
cards or transport tickets; it can affect the
information on the magnetic strips.
Ź
Do not tap the screen with a sharp object;
otherwise, it may damage the phone.
Ź
Do not expose the phone to liquid or
moisture.
Ź
Use the accessories like an earphone
cautiously. Do not tap the antenna
unnecessarily.
microSD card information and
care
Ź
The microSD card cannot be used for
recording copyright- protected data.
Ź
Keep the microSD card out of the small
children's reach.
Ź
Do not leave the microSD card in extremely
hot location.
Ź
Do not disassemble or modify the microSD
card.
94
For Your Safety
HAC
This phone has been tested and rated for use
with hearing aids for some of the wireless
technologies that it uses. However, there may
be some newer wireless technologies used in
this phone that have not been tested yet for
use with hearing aids. It is important to try
the different features of this phone thoroughly
and in different locations, using your hearing
aid or cochlear implant, to determine if you
hear any interfering noise. Consult your
service provider or the manufacturer of
this phone for information on hearing aid
compatibility. If you have questions about
return or exchange policies, consult your
service provider or phone retailer.
FCC RF Exposure Information
WARNING! Read this information before
operating the phone.
In August 1996, the Federal Communications
Commission (FCC) of the United States, with
its action in Report and Order FCC 96-326,
adopted an updated safety standard for
human exposure to radio frequency (RF)
electromagnetic energy emitted by FCC
regulated transmitters. Those guidelines are
consistent with the safety standard previously
set by both U.S. and international standards
bodies.
The design of this phone complies with
the FCC guidelines and these international
standards.
CAUTION
Use only the supplied antenna. Use of
unauthorized antennas or modifications could
impair call quality, damage the phone, void
your warranty and/or result in violation of
FCC regulations. Do not use the phone with a
damaged antenna. A damaged antenna could
cause a minor skin burn. Contact your local
dealer for a replacement antenna.
Body-worn Operation
This device was tested for typical body-worn
operations with the back of the phone kept
0.39 inches (1cm) between the user’s body
and the back of the phone. To comply with
FCC RF exposure requirements, a minimum
separation distance of 0.39 inches (1cm) must
be maintained between the user’s body and
the back of the phone. Third-party belt-clips,
holsters, and similar accessories containing
metallic components may not be used.
95
For Your Safety
Body-worn accessories that cannot maintain
0.39 inches (1cm) separation distance
between the user's body and the back of the
phone, and have not been tested for typical
body-worn operations may not comply with
FCC RF exposure limits and should be avoided.
Part 15.19 statement
This device complies with part15 of FCC rules.
Operation is subject to the following two
conditions:
(1) This device may not cause harmful
interference.
(2) This device must accept any interference
received, including interference that may
cause undesired operation.
Part 15.21 statement
Changes or modifications that are not
expressly approved by the manufacturer
could void the user's authority to operate the
equipment.
Part 15.105 statement
This equipment has been tested and found
to comply with the limits for a class B
digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is
no guarantee that interference will not occur
in a particular installation.If you experience
interference with reception (e.g.,television),
determine if this equipment is causing the
harmful interference by turning the equipment
off and then back on to see if the interference
is affected. If necessary, try correcting the
interference by one or more of the following
measures:
Ź
Reorient or relocate the receiving antenna.
Ź
Increase the separation between the
equipment and receiver.
96
For Your Safety
Ź
Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
Ź
Consult the dealer or an experienced radio/
TV technician for help.
Cautions for Battery
Ź
Do not disassemble or open crush, bend or
deform, puncture or shred.
Ź
Do not modify or remanufacture, attempt
to insert foreign objects into the battery,
immerse or expose to water or other
liquids, expose to fire, explosion or other
hazard.
Ź
Only use the battery for the system for
which it is specified.
Ź
Only use the battery with a charging
system that has been qualified with
the system per this standard. Use of an
unqualified battery or charger may present
a risk of fire, explosion, leakage, or other
hazard.
Ź
Battery usage by children should be
supervised.
Ź
Avoid dropping the phone. If the phone
is dropped, especially on a hard surface,
and the user suspects damage, take it to a
service center for inspection.
Ź
Improper battery use may result in a fire,
explosion or other hazard.
Ź
For those host devices that utilize a USB
port as a charging source, the host device’s
user manual shall include a statement
that the phone shall only be connected to
products that bear the USB-IF logo or have
completed the USB-IF compliance program.
Adapter (Charger) Cautions
Ź
Using the wrong battery charger could
damage your phone and void your
warranty.
Ź
The adapter or battery charger is intended
for indoor use only.
Do not expose the adapter or battery charger
to direct sunlight or use it in places with high
humidity, such as the bathroom.
97
For Your Safety
Avoid damage to your hearing
Damage to your hearing can occur if you are
exposed to loud sound for long periods of
time. We therefore recommend that you do
not turn on or off the handset close to your
ear. We also recommend that music and call
volumes are set to a reasonable level.
Ź
If you are listening to music while out and
about, please ensure that the volume is at
a reasonable level so that you are aware
of your surroundings. This is particularly
imperative when attempting to cross the
street.
Wi-Fi Caution
This device is capable of operating in
802.11a/n mode. For 802.11a/n devices
operating in the frequency range of 5.15
– 5.25 GHz, they are restricted for indoor
operations to reduce any potential harmful
interference for Mobile Satellite Services
(MSS) in the US. WIFI Access Points that are
capable of allowing your device to operate in
802.11a/n mode(5.15 – 5.25 GHz band) are
optimized for indoor use only.
If your WIFI network is capable of operating
in this mode, please restrict your WIFI use
indoors to not violate federal regulations to
protect Mobile Satellite Services.
98
TIA Safety Information
Provided herein is the complete TIA Safety
Information for Wireless Handheld phones.
Inclusion of the text covering Pacemakers,
Hearing Aids, and Other Medical Devices
is required in the owner’s manual for CTIA
Certification. Use of the remaining TIA
language is encouraged when appropriate.
Exposure to Radio Frequency
Signal
Your wireless handheld portable telephone
is a lowpower radio transmitter and receiver.
When it is ON, it receives and also sends out
radio frequency (RF) signals.
In August, 1996, the Federal Communications
Commissions (FCC) adopted RF exposure
guidelines with safety levels for handheld
wireless phones. Those guidelines are
consistent with the safety standards
previously set by both U.S. and international
standards bodies:
ANSI C95.1 (1992) *
NCRP Report 86 (1986)
ICNIRP (1996)
Those standards were based on
comprehensive and periodic evaluations of the
relevant scientific literature. For example, over
120 scientists, engineers, and physicians from
universities, government health agencies,
and industry reviewed the available body
of research to develop the ANSI Standard
(C95.1).
* American National Standards Institute;
National Council on Radiation Protection
and Measurements; International
Commission on Non-Ionizing Radiation
Protection
The design of your phone complies with the
FCC guidelines (and those standards).
Antenna Care
Use only the supplied or an approved
replacement antenna. Unauthorized antennas,
modifications, or attachments could damage
the phone and may violate FCC regulations.
Tips on Efficient Operation
For your phone to operate most efficiently:
Don’t touch the antenna unnecessarily when
the phone is in use. Contact with the antenna
affects call quality and may cause the phone
Safety Guidelines
Safety Guidelines
99
to operate at a higher power level than
otherwise needed.
Driving
Check the laws and regulations on the use
of wireless phones in the areas where you
drive and always obey them. Also, if using
your phone while driving, please observe the
following:
Ź
Give full attention to driving - driving safely
is your first responsibility;
Ź
Use hands-free operation, if available;
Ź
Pull off the road and park before making or
answering a call if driving conditions or the
law require it.
Electronic Devices
Most modern electronic equipment is shielded
from RF signals. However, certain electronic
equipment may not be shielded against the RF
signals from your wireless phone.
Pacemakers
The Health Industry Manufacturers
Association recommends that a minimum
separation of six (6’) inches be maintained
between a handheld wireless phone and a
pacemaker to avoid potential interference
with the pacemaker. These recommendations
are consistent with the independent research
by and recommendations of Wireless
Technology Research.
Persons with pacemakers:
Ź
Should ALWAYS keep the phone more than
six (6) inches from their pacemaker when
the phone is turned ON;
Ź
Should not carry the phone in a breast
pocket;
Ź
Should use the ear opposite the pacemaker
to minimize the potential for interference;
Ź
Should turn the phone OFF immediately
if there is any reason to suspect that
interference is taking place.
Hearing Aids
Some digital wireless phones may interfere
with some hearing aids. In the event of such
interference, you may want to consult AT&T.
HAC
This phone has been tested and rated for use
with hearing aids for some of the wireless
technologies that it uses. However, there may
Safety Guidelines
100
be some newer wireless technologies used in
this phone that have not been tested yet for
use with hearing aids. It is important to try
the different features of this phone thoroughly
and in different locations, using your hearing
aid or cochlear implant, to determine if you
hear any interfering noise. Consult your
service provider or the manufacturer of
this phone for information on hearing aid
compatibility. If you have questions about
return or exchange policies, consult your
service provider or phone retailer.
Other Medical Devices
If you use any other personal medical device,
consult the manufacturer of your device to
determine if they are adequately shielded
from external RF energy. Your physician
may be able to assist you in obtaining this
information.
Health Care Facilities
Turn your phone OFF in health care facilities
when any regulations posted in these areas
instruct you to do so. Hospitals or health care
facilities may use equipment that could be
sensitive to external RF energy.
Vehicles
RF signals may affect improperly installed or
inadequately shielded electronic systems in
motor vehicles. Check with the manufacturer
or its representative regarding your vehicle.
You should also consult the manufacturer of
any equipment that has been added to your
vehicle.
Posted Facilities
Turn your phone OFF in any facility where
posted notices so require.
Aircraft
FCC regulations prohibit using your phone
while in the air. Turn your phone OFF before
boarding an aircraft.
Blasting Areas
To avoid interfering with blasting operations,
turn your phone OFF when in a ‘blasting areas
or in areas posted: ‘Turn off two-way radio’.
Obey all signs and instructions.
Safety Guidelines
101
Potentially Explosive Atmosphere
Turn your phone OFF when in any area with a
potentially explosive atmosphere and obey all
signs and instructions. Sparks in such areas
could cause an explosion or fire resulting in
bodily injury or even death.
Areas with a potentially explosive atmosphere
are often, but not always, marked clearly.
Potential areas may include: fueling areas
(such as gasoline stations); below deck on
boats; fuel or chemical transfer or storage
facilities; vehicles using liquefied petroleum
gas (such as propane or butane); areas where
the air contains chemicals or particles (such
as grain, dust, or metal powders); and any
other area where you would normally be
advised to turn off your vehicle engine.
For Vehicles Equipped with an
Air Bag
An air bag inflates with great force. DO NOT
place objects, including either installed or
portable wireless equipment, in the area over
the air bag or in the air bag deployment area.
If in-vehicle wireless equipment is improperly
installed and the air bag inflates, serious
injury could result.
Charger and Adapter Safety
Ź
The charger and adapter are intended for
indoor use only.
Battery Information and Care
Ź
Always unplug the charger from the wall
socket after the phone is fully charged to
save unnecessary power consumption of
the charger.
Ź
Please read the manual of specified
charger about charging method.
Ź
Do not damage the power cord by bending,
twisting, or heating. Do not use the plug
if it is loose as it may cause electric shock
or fire.
Ź
Do not place any heavy items on the power
cord. Do not allow the power cord to be
crimped as it may cause electric shock
or fire.
Ź
Unplug the power cord prior to cleaning
your phone, and clean the power plug pin
when it’s dirty. When using the power plug,
ensure that it’s firmly connected. If not, it
may cause excessive heat or fire. If you
put your phone in a pocket or bag without
covering the receptacle of the phone
Safety Guidelines
102
(power plug pin), metallic articles (such as
a coin, paperclip or pen) may short-circuit
the phone. Always cover the receptacle
when not in use.
Ź
Recharge the battery after long periods of
non-use to maximize battery life. Battery
life will vary due to usage pattern and
environmental conditions.
Ź
Never store your phone in temperature less
than -4°F or greater than 122°F. Charge the
BATTERYINRANGEOFª#^ª#
Ź
Charging temperature range is regulated
between 0°C and 45°C. Do not charge the
battery out of recommended temperature
range. Charging out of recommended range
might cause the generating heat or serious
damage of battery.
And also, it might
cause the deterioration of battery's
characteristics and cycle life.
Ź
Do not use or leave the battery under the
blazing sun or in heated car by sunshine.
The battery may generate heat, smoke
or flame. And also, it might cause the
deterioration of battery’s characteristics
or cycle life.
Ź
The battery pack has protection circuit to
avoid the danger. Do not use nearby the
place where generates static electricity
more than 100V which gives damage to the
protection circuit. If the protection circuit
were broken, the battery would generate
smoke, rupture or flame.
Ź
If the skin or cloth is smeared with liquid
from the battery, wash with fresh water. It
may cause the skin inflammation.
Ź
Please take your phone to an authorized
service center immediately if this occurs.
Ź
Do not handle the phone with wet hands
while it is being charged. It may cause an
electric shock or seriously damage your
phone.
Ź
Do not place or answer calls while
charging the phone as it may short-circuit
the phone and/or cause electric shock
or fire.
Ź
The charger and adapter are intended for
indoor use only.
Ź
Talking on your phone for a long period of
time may reduce call quality due to heat
generated during use.
Safety Guidelines
103
Explosion, Shock, and Fire Hazards
Ź
Do not put your phone in a place subject
to excessive dust and keep the minimum
required distance between the power cord
and heat sources.
Ź
Unplug the power cord prior to cleaning
your phone, and clean the power plug pin
when it is dirty.
Ź
When using the power plug, ensure that
it is firmly connected. If it is not, it may
cause excessive heat or fire.
Ź
If you put your phone in a pocket or bag
without covering the receptacle of the
phone (power plug pin), metallic articles
(such as a coin, paperclip or pen) may
short-circuit the phone. Always cover the
receptacle when not in use.
Ź
Do not short-circuit the battery. Metallic
articles such as a coin, paperclip or pen in
your pocket or bag may short-circuit the +
and – terminals of the battery (metal strips
on the battery) upon moving. Short-circuit
of the terminal may damage the battery
and cause an explosion.
General Notice
Ź
Using a damaged battery or placing a
battery in your mouth may cause serious
injury.
Ź
Do not place items containing magnetic
components such as a credit card, phone
card, bank book or subway ticket near your
phone. The magnetism of the phone may
damage the data stored in the magnetic
strip.
Ź
Talking on your phone for a long period of
time may reduce call quality due to heat
generated during use.
Ź
When the phone is not used for a long
period time, store it in a safe place with
the power cord unplugged.
Ź
Using the phone in proximity to receiving
equipment (i.e., TV or radio) may cause
interference to the phone.
Ź
Do not use the phone if the antenna is
damaged. If a damaged antenna contacts
skin, it may cause a slight burn. Please
contact an LG Authorized Service Center to
replace the damaged antenna.
Safety Guidelines
104
Ź
Do not immerse your phone in water. If
this happens, turn it off immediately and
remove the battery. If the phone does not
work, take it to an LG Authorized Service
Center.
Ź
Do not paint your phone.
Ź
The data saved in your phone might be
deleted due to careless use, repair of
the phone, or upgrade of the software.
Please backup your important phone
numbers. (Ring tones, text messages, voice
messages, pictures, and videos could also
be deleted.) The manufacturer is not liable
for damage due to the loss of data.
Ź
When you use the phone in public places,
set the ring tone to vibration so as not to
disturb others.
Ź
Do not turn your phone on or off when
putting it in your ear.
Ź
Your phone is an electronic device that
generates heat during normal operation.
Extremely prolonged, direct skin contact
in the absence of adequate ventilation
may result in discomfort or minor burns.
Therefore, use care when handling
your phone during or immediately after
operation.
Caution: Avoid potential
hearing loss.
Prolonged exposure to loud sounds (including
music) is the most common cause of
preventable hearing loss. Some scientific
research suggests that using portable audio
devices, such as portable music players and
cellular telephones, at high volume settings
for long durations may lead to permanent
noise induced hearing loss. This includes
the use of headphones (including headsets,
earbuds and Bluetooth® or other wireless
devices).
Exposure to very loud sound has also been
associated in some studies with tinnitus (a
ringing in the ear), hypersensitivity to sound
and distorted hearing. Individual susceptibility
to noise-induced hearing loss and other
potential hearing problems varies.
The amount of sound produced by a portable
audio device varies depending on the nature
of the sound, the device, the device settings
and the headphones. You should follow some
commonsense recommendations when using
any portable audio device: 204 Safety
Safety Guidelines
105
Ź
Set the volume in a quiet environment and
select the lowest volume at which you can
hear adequately.
Ź
When using headphones, turn the volume
down if you cannot hear the people
speaking near you or if the person sitting
next to you can hear what you are listening
to.
Ź
Do not turn the volume up to block
out noisy surroundings. If you choose
to listen to your portable device in a
noisy environment, use noisecancelling
headphones to block out background
environmental noise.
Ź
Limit the amount of time you listen. As the
volume increases, less time is required
before your hearing could be affected.
Ź
Avoid using headphones after exposure
to extremely loud noises, such as rock
concerts, that might cause temporary
hearing loss. Temporary hearing loss might
cause unsafe volumes to sound normal.
Ź
Do not listen at any volume that causes
you discomfort. If you experience ringing
in your ears, hear muffled speech or
experience any temporary hearing difficulty
after listening to your portable audio
device, discontinue use and consult your
doctor.
You can obtain additional information on this
subject from the following sources:
Safety 205
American Academy of Audiology 11730 Plaza
American Drive, Suite 300
Reston, VA 20190
Voice: (800) 222-2336
Email: info@audiology.org
Internet: www.audiology.org
National Institute on Deafness and Other
Communication
Disorders
National Institutes of Health
31 Center Drive, MSC 2320
Bethesda, MD USA 20892-2320
Voice: (301) 496-7243
Email: nidcdinfo@nih.gov
Internet: http://www.nidcd.nih.gov/health/
hearing
National Institute for Occupational Safety and
Health Hubert H. Humphrey Bldg.
Safety Guidelines
106
200 Independence Ave., SW Washington,
DC 20201 Voice: 1-800-35-NIOSH (1-800-
356-4674)
Internet: http://www.cdc.gov/niosh/topics/
noise/default.html
FDA Consumer Update
The U.S. Food and Drug Administration Center
for Devices and Radiological Health Consumer
Update on Mobile Phones.
1. Do wireless phones pose a health
hazard?
The available scientific evidence does
not show that any health problems are
associated with using wireless phones.
There is no proof, however, that wireless
phones are absolutely safe. Wireless
phones emit low levels of radiofrequency
energy (RF) in the microwave range
while being used. They also emit very
low levels of RF when in the Home
screen. Whereas high levels of RF can
produce health effects (by heating tissue),
exposure to low level RF that does not
produce heating effects causes no known
adverse health effects. Many studies of
low level RF exposures have not found
any biological effects. Some studies have
suggested that some biological effects
may occur, but such findings have not
been confirmed by additional research. In
some cases, other researchers have had
difficulty in reproducing those studies, or
in determining the reasons for inconsistent
results.
2. What is the FDA’s role concerning the
safety of wireless phones?
Under the law, the FDA does not review
the safety of radiation-emitting consumer
products such as wireless phones before
they can be sold, as it does with new drugs
or medical devices. However, the agency
has authority to take action if wireless
phones are shown to emit radiofrequency
energy (RF) at a level that is hazardous to
the user. In such a case, the FDA could
require the manufacturers of wireless
phones to notify users of the health hazard
and to repair, replace, or recall the phones
so that the hazard no longer exists.
Although the existing scientific data do not
justify FDA regulatory actions, the FDA has
urged the wireless phone industry to take a
Safety Guidelines
107
number of steps, including the following:
Ź
Support needed research into possible
biological effects of RF of the type emitted
by wireless phones;
Ź
Design wireless phones in a way that
minimizes any RF exposure to the user that
is not necessary for device function; and
Ź
Cooperate in providing users of wireless
phones with the best possible information
on possible effects of wireless phone use
on human health.
Ź
The FDA belongs to an interagency working
group of the federal agencies that have
responsibility for different aspects of RF
safety to ensure coordinated efforts at
the federal level. The following agencies
belong to this working group:
Ź
National Institute for Occupational Safety
and Health
Ź
Environmental Protection Agency
Ź
Occupational Safety and Health
Administration
Ź
National Telecommunications and
Information Administration
The National Institutes of Health
participates in some interagency working
group activities, as well.
The FDA shares regulatory responsibilities
for wireless phones with the Federal
Communications Commission (FCC). All
phones that are sold in the United States
must comply with FCC safety guidelines
that limit RF exposure. The FCC relies on
the FDA and other health agencies for
safety questions about wireless phones.
The FCC also regulates the base stations
that the wireless phone networks rely
upon. While these base stations operate
at higher power than do the wireless
phones themselves, the RF exposures that
people get from these base stations are
typically thousands of times lower than
those they can get from wireless phones.
Base stations are thus not the subject
of the safety questions discussed in this
document.
3. What kinds of phones are the subject
of this update?
The term ‘wireless phone’ refers here to
handheld wireless phones with built-in
antennas, often called ‘cell’, ‘mobile’, or
‘PCS’ phones. These types of wireless
Safety Guidelines
108
phones can expose the user to measurable
radiofrequency energy (RF) because of the
short distance between the phone and
the user’s head. These RF exposures are
limited by FCC safety guidelines that were
developed with the advice of the FDA and
other federal health and safety agencies.
When the phone is located at greater
distances from the user, the exposure to RF
is drastically lower because a person’s RF
exposure decreases rapidly with increasing
distance from the source. The so-called
‘cordless phones,’ which have a base unit
connected to the telephone wiring in a
house, typically operate at far lower power
levels, and thus produce RF exposures far
below the FCC safety limits.
4. What are the results of the research
done already?
The research done thus far has produced
conflicting results, and many studies have
suffered from flaws in their research
methods. Animal experiments investigating
the effects of radiofrequency energy
(RF) exposures characteristic of wireless
phones have yielded conflicting results
that often cannot be repeated in other
laboratories. A few animal studies,
however, have suggested that low levels
of RF could accelerate the development
of cancer in laboratory animals. However,
many of the studies that showed increased
tumor development used animals that had
been genetically engineered or treated
with cancer causing chemicals so as to
be pre-disposed to develop cancer in the
absence of RF exposure. Other studies
exposed the animals to RF for up to 22
hours per day. These conditions are not
similar to the conditions under which
people use wireless phones, so we don’t
know with certainty what the results of
such studies mean for human health.
Three large epidemiology studies have
been published since December 2000.
Between them, the studies investigated
any possible association between the
use of wireless phones and primary brain
cancer, glioma, meningioma, or acoustic
neuroma, tumors of the brain or salivary
gland, leukemia, or other cancers. None of
the studies demonstrated the existence of
any harmful health effects from wireless
phone RF exposures. However, none of the
studies can answer questions about long-
Safety Guidelines
109
term exposures, since the average period
of phone use in these studies was around
three years.
5. What research is needed to decide
whether RF exposure from wireless
phones poses a health risk?
A combination of laboratory studies
and epidemiological studies of people
actually using wireless phones would
provide some of the data that are needed.
Lifetime animal exposure studies could
be completed in a few years. However,
very large numbers of animals would
be needed to provide reliable proof of
a cancer promoting effect if one exists.
Epidemiological studies can provide
data that is directly applicable to human
populations, but 10 or more years follow-
up may be needed to provide answers
about some health effects, such as cancer.
This is because the interval between the
time of exposure to a cancer-causing
agent and the time tumors develop - if
they do- may be many, many years. The
interpretation of epidemiological studies
is hampered by difficulties in measuring
actual RF exposure during day-to-day use
of wireless phones. Many factors affect
this measurement, such as the angle at
which the phone is held, or which model of
phone is used.
6. What is the FDA doing to find out more
about the possible health effects of
wireless phone RF?
The FDA is working with the U.S. National
Toxicology Program and with groups
of investigators around the world to
ensure that high priority animal studies
are conducted to address important
questions about the effects of exposure
to radiofrequency energy (RF). The FDA
has been a leading participant in the
World Health Organization International
Electromagnetic Fields (EMF) Project since
its inception in 1996. An influential result
of this work has been the development of a
detailed agenda of research needs that has
driven the establishment of new research
programs around the world. The project
has also helped develop a series of public
information documents on EMF issues. The
FDA and the Cellular Telecommunications
& Internet Association (CTIA) have a formal
Cooperative Research and Development
Safety Guidelines
110
Agreement (CRADA) to do research on
wireless phone safety. The FDA provides
the scientific oversight, obtaining input
from experts in government, industry,
and academic organizations. CTIA-funded
research is conducted through contracts
with independent investigators. The initial
research will include both laboratory
studies and studies of wireless phone
users. The CRADA will also include a
broad assessment of additional research
needs in the context of the latest research
developments around the world.
7. How can I find out how much radio
frequency energy exposure I can get
by using my wireless phone?
All phones sold in the United States must
comply with Federal Communications
Commission (FCC) guidelines that limit
radio frequency energy (RF) exposures.
The FCC established these guidelines in
consultation with the FDA and the other
federal health and safety agencies. The
FCC limit for RF exposure from wireless
telephones is set at a Specific Absorption
Rate (SAR) of 1.6 watts per kilogram
(1.6 W/kg). The FCC limit is consistent
with the safety standards developed by
the Institute of Electrical and Electronic
Engineering (IEEE) and the National
Council on Radiation Protection and
Measurement. The exposure limit takes
into consideration the body’s ability to
remove heat from the tissues that absorb
energy from the wireless phone and is
set well below levels known to have
effects. Manufacturers of wireless phones
must report the RF exposure level for
each model of phone to the FCC. The FCC
website (http://www.fcc.gov/oet/rfsafety)
gives directions for locating the FCC
identification number on your phone so you
can find your phone’s RF exposure level in
the online listing.
8. What has the FDA done to measure the
radio frequency energy coming from
wireless phones?
The Institute of Electrical and Electronic
Engineers (IEEE) is developing a technical
standard for measuring the radio frequency
energy (RF) exposure from wireless
phones and other wireless handsets with
the participation and leadership of FDA
scientists and engineers. The standard,
Safety Guidelines
111
‘Recommended Practice for Determining
the Spatial- Peak Specific Absorption Rate
(SAR) in the Human Body Due to Wireless
Communications Devices: Experimental
Techniques,’ sets forth the first consistent
test methodology for measuring the
rate at which RF is deposited in the
heads of wireless phone users. The test
method uses a tissuesimulating model
of the human head. Standardized SAR
test methodology is expected to greatly
improve the consistency of measurements
made at different laboratories on the
same phone. SAR is the measurement of
the amount of energy absorbed in tissue,
either by the whole body or a small part
of the body. It is measured in watts/kg (or
milliwatts/g) of matter. This measurement
is used to determine whether a wireless
phone complies with safety guidelines.
9. What steps can I take to reduce my
exposure to radiofrequency energy
from my wireless phone?
If there is a risk from these products - and
at this point we do not know that there
is - it is probably very small. But if you are
concerned about avoiding even potential
risks, you can take a few simple steps to
minimize your exposure to radiofrequency
energy (RF). Since time is a key factor in
how much exposure a person receives,
reducing the amount of time spent using a
wireless phone will reduce RF exposure. If
you must conduct extended conversations
by wireless phone every day, you could
place more distance between your body
and the source of the RF, since the
exposure level drops off dramatically with
distance. For example, you could use a
headset and carry the wireless phone away
from your body or use a wireless phone
connected to a remote antenna. Again,
the scientific data do not demonstrate that
wireless phones are harmful. But if you
are concerned about the RF exposure from
these products, you can use measures like
those described above to reduce your RF
exposure from wireless phone use.
10. What about children using wireless
phones?
The scientific evidence does not show
a danger to users of wireless phones,
including children and teenagers. If you
want to take steps to lower exposure to
Safety Guidelines
112
radiofrequency energy (RF), the measures
described above would apply to children
and teenagers using wireless phones.
Reducing the time of wireless phone use
and increasing the distance between
the user and the RF source will reduce
RF exposure. Some groups sponsored by
other national governments have advised
that children be discouraged from using
wireless phones at all. For example,
the government in the United Kingdom
distributed leaflets containing such a
recommendation in December 2000. They
noted that no evidence exists that using
a wireless phone causes brain tumors or
other ill effects. Their recommendation to
limit wireless phone use by children was
strictly precautionary; it was not based on
scientific evidence that any health hazard
exists.
11. What about wireless phone
interference with medical equipment?
Radio frequency energy (RF) from wireless
phones can interact with some electronic
devices. For this reason, the FDA helped
develop a detailed test method to measure
electromagnetic interference (EMI) of
implanted cardiac pacemakers and
defibrillators from wireless telephones.
This test method is now part of a standard
sponsored by the Association for the
Advancement of Medical instrumentation
(AAMI). The final draft, a joint effort by
the FDA, medical device manufacturers,
and many other groups, was completed
in late 2000. This standard will allow
manufacturers to ensure that cardiac
pacemakers and defibrillators are safe
from wireless phone EMI. The FDA has
tested hearing aids for interference
from handheld wireless phones and
helped develop a voluntary standard
sponsored by the Institute of Electrical and
Electronic Engineers (IEEE). This standard
specifies test methods and performance
requirements for hearing aids and wireless
phones so that no interference occurs
when a person uses a ‘compatible’ phone
and a ‘compatible’ hearing aid at the same
time. This standard was approved by the
IEEE in 2000. The FDA continues to monitor
the use of wireless phones for possible
interactions with other medical devices.
Should harmful interference be found
to occur, the FDA will conduct testing
Safety Guidelines
113
to assess the interference and work to
resolve the problem.
12. Where can I find additional
information?
For additional information, please refer to
the following resources:
FDA web page on wireless phones
(http://www.fda.gov, click on "C" in the
index and "Cell Phones")
Federal Communications Commission (FCC)
RF Safety Program
(http://www.fcc.gov/oet/rfsafety)
International Commission on Non-lonizing
Radiation Protection
(http://www.icnirp.de)
World Health Organization (WHO)
International EMF Project
(http://www.who.int/emf)
National Radiological Protection Board (UK)
(http://www.hpa.org.uk/radiation/)
10 Driver Safety Tips
Your wireless phone gives you the
powerful ability to communicate by voice
almost anywhere, anytime. An important
responsibility accompanies the benefits of
wireless phones, one that every user must
uphold.
When operating a car, driving is your first
responsibility.
When using your wireless phone behind the
wheel of a car, practice good common sense
and remember the following tips:
1. Get to know your wireless phone and its
features such as speed dial and redial.
Carefully read your instruction manual
and learn to take advantage of valuable
features most phones offer, including
automatic redial and memory. Also, work to
memorize the phone keypad so you can use
the speed dial function without taking your
attention off the road.
2. When available, use a hands-free device.
A number of hands-free wireless phone
accessories are readily available today.
Whether you choose an installed mounted
device for your wireless phone or a speaker
Safety Guidelines
114
phone accessory, take advantage of these
devices if available to you.
3. Make sure you place your wireless phone
within easy reach and where you can
reach it without removing your eyes from
the road. If you get an incoming call at
an inconvenient time, if possible, let your
voicemail answer it for you.
4. Suspend conversations during hazardous
driving conditions or situations. Let the
person you are speaking with know you
are driving; if necessary, suspend the call
in heavy traffic or hazardous weather
conditions. Rain, sleet, snow and ice can
be hazardous, but so is heavy traffic. As
a driver, your first responsibility is to pay
attention to the road.
5. Do not take notes or look up phone
numbers while driving. If you are reading
an Address Book or business card, or
writing a “to-do” list while driving a car,
you are not watching where you are going.
It is common sense. Don’t get caught in
a dangerous situation because you are
reading or writing and not paying attention
to the road or nearby vehicles.
6. Dial sensibly and assess the traffic; if
possible, place calls when you are not
moving or before pulling into traffic. Try to
plan your calls before you begin your trip
or attempt to coincide your calls with times
you may be stopped at a stop sign, red light
or otherwise stationary. But if you need to
dial while driving, follow this simple tip—
dial only a few numbers, check the road
and your mirrors, then continue.
7. Do not engage in stressful or emotional
conversations that may be distracting.
Stressful or emotional conversations and
driving do not mix; they are distracting
and even dangerous when you are behind
the wheel of a car. Make people you are
talking with aware you are driving and if
necessary, suspend conversations which
have the potential to divert your attention
from the road.
8. Use your wireless phone to call for help.
Your wireless phone is one of the greatest
tools you can own to protect yourself and
your family in dangerous situations — with
your phone at your side, help is only three
numbers away. Dial 911 or other local
emergency number in the case of fire,
traffic accident, road hazard or medical
Safety Guidelines
115
emergency. Remember, it is a free call on
your wireless phone!
9. Use your wireless phone to help others in
emergencies. Your wireless phone provides
you a perfect opportunity to be a “Good
Samaritan” in your community. If you see
an auto accident, crime in progress or
other serious emergency where lives are in
danger, call 911 or other local emergency
number, as you would want others to do
for you.
10. Call roadside assistance or a special
wireless non-emergency assistance
number when necessary. Certain
situations you encounter while driving
may require attention, but are not urgent
enough to merit a call for emergency
services. But you can still use your
wireless phone to lend a hand. If you see
a broken-down vehicle posing no serious
hazard, a broken traffic signal, a minor
traffic accident where no one appears
injured or a vehicle. You know to be
stolen, call roadside assistance or other
special non-emergency wireless number.
The above tips are meant as general
guidelines. Before deciding to use your
mobile device while operating a vehicle,
it is recommended that you consult your
applicable jurisdiction’s local laws or other
regulations regarding such use. Such
laws or other regulations may prohibit or
otherwise restrict the manner in which
a driver may use his or her phone while
operating a vehicle.
For more information, please call to
888-901-SAFE, or visit our website
http://www.ctia.org.
Consumer Information on SAR
(Specific Absorption Rate)
This model phone meets the government’s
requirements for exposure to radio waves.
Your wireless phone is a radio transmitter
and receiver. It is designed and manufactured
not to exceed the emission limits for
exposure to radio frequency (RF) energy set
by the Federal Communications Commission
(FCC) of the U.S. Government. These limits
are part of comprehensive guidelines and
establish permitted levels of RF energy for
the general population. The guidelines are
based on standards that were developed by
independent scientific organizations through
periodic and thorough evaluation of scientific
Safety Guidelines
116
studies. The standards include a substantial
safety margin designed to assure the safety of
all persons, regardless of age and health.
The exposure standard for wireless mobile
phones employs a unit of measurement
known as the Specific Absorption Rate, or
SAR. The SAR limit set by the FCC is 1.6 W/
kg.* Tests for SAR are conducted using
standard operating positions specified by the
FCC with the phone transmitting at its highest
certified power level in all tested frequency
bands. Although SAR is determined at the
highest certified power level, the actual SAR
level of the phone while operating can be
well below the maximum value. Because
the phone is designed to operate at multiple
power levels to use only the power required
to reach the network, in general, the closer
you are to a wireless base station antenna,
the lower the power output.
Before a phone model is available for sale
to the public, it must be tested and certified
to the FCC that it does not exceed the limit
established by the government-adopted
requirement for safe exposure. The tests are
performed in positions and locations (e.g., at
the ear and worn on the body) as required
by the FCC for each model. The highest SAR
value for this phone when tested for use
at the ear is X.XX W/kg and when worn on
the body, as described in this user’s manual,
is X.XX W/kg. (Body-worn measurements
differ among phones models, depending upon
available accessories and FCC requirements.)
While there may be differences between
SAR levels of various phones and at various
positions, they all meet the government
requirement for safe exposure.
The FCC has granted an Equipment
Authorization for this model phone with
all reported SAR levels evaluated as in
compliance with the FCC RF emission
guidelines. SAR information on this model
phone is on file with the FCC and can be
found under the Display Grant section of
http://www.fcc.gov/oet/fccid after searching
on FCC ID ZNFC410.
Additional information on Specific Absorption
Rates (SAR) can be found on the Cellular
Telecommunications Industry Association
(CTIA) website at http://www.ctia.org
* In the United States and Canada, the SAR
limit for mobile phones used by the public
is 1.6 watts/kg (W/kg) averaged over one
gram of tissue. The standard incorporates
Safety Guidelines
117
a substantial margin of safety to give
additional protection for the public and to
account for any variations in measurements.
FCC Hearing-Aid Compatibility
(HAC) Regulations for Wireless
Devices
On July 10, 2003, the U.S. Federal
Communications Commission (FCC) Report
and Order in WT Docket 01-309 modified
the exception of wireless phones under the
Hearing Aid Compatibility Act of 1988 (HAC
Act) to require digital wireless phones be
compatible with hearing-aids. The intent of
the HAC Act is to ensure reasonable access to
telecommunications services for persons with
hearing disabilities.
While some wireless phones are used
near some hearing devices (hearing aids
and cochlear implants), users may detect a
buzzing, humming, or whining noise. Some
hearing devices are more immune than
others to this interference noise, and phones
also vary in the amount of interference they
generate.
The wireless telephone industry has
developed a rating system for wireless
phones, to assist hearing device users to find
phones that may be compatible with their
hearing devices. Not all phones have been
rated. Phones that are rated have the rating
on their box or a label located on the box.
The ratings are not guarantees. Results will
vary depending on the user’s hearing device
and hearing loss. If your hearing device
happens to be vulnerable to interference,
you may not be able to use a rated phone
successfully. Trying out the phone with your
hearing device is the best way to evaluate it
for your personal needs.
M-Ratings: Phones rated M3 or M4 meet FCC
requirements and are likely to generate less
interference to hearing devices than phones
that are not labeled. M4 is the better/higher
of the two ratings.
T-Ratings: Phones rated T3 or T4 meet FCC
requirements and are likely to generate less
interference to hearing devices than phones
that are not labeled. T4 is the better/ higher
of the two ratings.
Safety Guidelines
118
Hearing devices may also be rated. Your
hearing device manufacturer or hearing health
professional may help you find this rating.
Higher ratings mean that the hearing device
is relatively immune to interference noise.
The hearing aid and wireless phone rating
values are then added together. A sum of 5 is
considered acceptable for normal use. A sum
of 6 is considered for best use.
In the above example, if a hearing aid meets
the M2 level rating and the wireless phone
meets the M3 level rating, the sum of the
two values equal M5. This should provide the
hearing aid user with “normal usage” while
using their hearing aid with the particular
wireless phone. “Normal usage” in this
context is defined as a signal quality that’s
acceptable for normal operation.
The M mark is intended to be synonymous
with the U mark. The T mark is intended to
be synonymous with the UT mark. The M and
T marks are recommended by the Alliance
for Telecommunications Industries Solutions
(ATIS). The U and UT marks are referenced
in Section 20.19 of the FCC Rules. The HAC
rating and measurement procedure are
described in the American National Standards
Institute (ANSI) C63.19 standard.
When you’re talking on a cell phone, it’s
recommended that you turn the BT (Bluetooth)
mode off for HAC.
For information about hearing aids and digital
wireless phones
Wireless Phones and Hearing Aid
Accessibility
http://www.accesswireless.org/Home.aspx
FCC Hearing Aid Compatibility and Volume
Control
http://www.fcc.gov/cgb/consumerfacts/
hac_wireless.html
119
To help you understand the main technical terms and abbreviations used in this booklet and to
take full advantage of the features on your mobile phone, here are a few definitions.
Call Reject
The ability to restrict incoming calls.
Call Forwarding
The ability to reroute calls to another number.
Call Waiting
The ability to inform users that they have an
incoming call when engaged on another call.
GPRS (General Packet Radio
Service)
GPRS guarantees continuous connection to
the Internet for mobile phone and computer
users. It is based on the Global System
for Mobile Communication (GSM) circuit-
switched cellular phone connections and the
Short Message Service (SMS).
GSM (Global System for Mobile
Communication)
International standard for cellular
communication, guaranteeing compatibility
between the various network operators. GSM
covers most European countries and many
other parts of the world.
Java
Programming language generating
applications that can run on many hardware
platforms, whether small, medium or large,
without modification.
It has been promoted for and geared heavily
towards the Web, both for public Web sites
and Intranets. When a Java program runs
from a Web page, it is called a Java applet.
When it is run on a mobile phone or pager, it
is called a MIDlet.
Glossary
120
Glossary
Line Identification Services
(Caller ID)
Service allowing subscribers to view or block
the telephone numbers of callers.
Conference Calls
Ability to establish a conference call involving
up to five additional parties.
Roaming
Use of your phone when you are outside your
home area (for example, when traveling).
SDN (Service Dial Number)
Telephone numbers supplied by your network
provider and giving access to special services
such as voice mail, directory inquiries,
customer support and emergency services.
Security Code
Security code used to unlock the phone
when you have selected the option to lock it
automatically each time it switches on.
SIM card
Card containing a chip with all the information
required to operate the phone (network
and memory information, as well as the
subscriber’s personal data). The SIM card fits
into a small slot on the back of the phone and
is protected by the battery.
SMS (Short Message Service)
Network service sending and receiving
text messages to and from another
subscriber, without the need to speak to
the correspondent. The message created or
received (up to 160 characters long) can be
displayed, received, edited or sent.

Navigation menu