LG Electronics USA CB630 Cellular/PCS GSM/EDGE/WCDMA Phone with Bluetooth User Manual CB630 Eng 0214

Download:
Mirror Download [FCC.gov]
Document ID	924984
Application ID	7nBbZIh6gMoVrF0rBiSo9A==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	155.26kB (1940727 bits)
Date Submitted	2008-04-08 00:00:00
Date Available	2008-08-21 00:00:00
Creation Date	2008-02-20 15:23:06
Producing Software	Acrobat Distiller 7.0 for Macintosh
Document Lastmod	2008-04-07 17:23:58
Document Title	CB630_Eng_0214
Document Creator	QuarkXPress: pictwpstops filter 1.0
Document Author:	YOO

CB630_Eng_0214
2/20/08
3:22 PM
Page 1
CB630
User Guide
Part 15.21 statement
" Change or Modifications that are not expressly approved by the manufacturer could void
the user's authority to operate the equipment. "
Part 15.105 statement
This equipment has been tested and found to comply with the limits for a class B digital device,
pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. if this
equipment does cause harmful interference or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help.
LIMITED WARRANTY STATEMENT
1. WHAT THIS WARRANTY COVERS:
LG offers you a limited warranty that the enclosed subscriber unit and its enclosed accessories will be
free from defects in material and workmanship, according to the following terms and conditions:
(1) The limited warranty for the product extends for ONE (1) year beginning on the data of purchase
of the product.
(2) The limited warranty extends on to the original purchaser of the product and is not assignable or
transferable to any subsequent purchaser/end user.
(3) This warranty is good only to the original purchaser of the product during the warranty period as
long as it is in the U.S., including Alaska, Hawaii, U.S. Territories and Canada.
(4) The external housing and cosmetic parts shall not be covered under these limited warranty terms.
(5) Upon request from LG, the consumer must provide information to reasonably prove the date of
purchase.
(6) The customer shall bear the cost of shipping the product to the Customer Service Department of
LG. LG shall bear the cost of shipping the product back to the consumer after the completion of
service under this limited warranty.
2. WHAT THIS WARRANTY DOES NOT COVER:
(1) Defects or damages resulting from use of the product in other than its normal and customary
manner.
(2) Defects or damages from abnormal use, abnormal conditions, improper storage, exposure to
moisture or dampness, unauthorized modifications, unauthorized connections, unauthorized repair,
misuse, neglect, abuse, accident, alteration, improper installation, or other acts which are not the
fault of LG, including damage caused by shipping blown fuses spills of food or liquid.
(3) Breakage or damage to antennas unless caused directly by defects in material or workmanship.
(4) That the Customer Service Department at LG was net notified by consumer of the alleged defect
or malfunction of the product during the applicable limited warranty period.
(5) Products which have had the serial number removed or made illegible.
(6) The limited warranty is in lieu of all other warranties, express or implied either in fact or by
operations law, statutory or otherwise, including, but limited to any implied warranty of
marketability or fitness for a particular use.
(7) Damage resulting from use of non-LG approved accessories.
(8) All plastic surfaces and all other externally exposed parts that are scratched or damaged due to
normal customer use.
(9) Products operated outside published maximum ratings.
(10) Products used or obtained in a rental program.
(11) Consumables (such as fuses).
3. STATE LAW RIGHTS:
No other express warranty is applicable to this product. THE DURATION OF ANY IMPLIED
WARRANTIES, INCLUDING THE IMPLIED WARRANTY OF MARKETABILITY, IS LIMITED
TO THE DURATION OF THE EXPRESS WARRANTY HEREIN. LG INFOCOMM INC. SHALL
NOT BE LIABLE FOR THE LOSS OF THE USE OF THE PRODUCT, INCONVENIENCE, LOSS
OR ANY OTHER DAMAGES, DIRECT OR CONSEQUENTIAL, RISING OUT OF THE USE OF,
OR INABILITY TO USE, THIS PRODUCT OR FOR ANY BREACH OF ANY EXPRESS OR
IMPLIED WARRANTY, INCLUDING THE IMPLIED WARRANTY OF MARKETABILITY
APPLICABLE TO THIS PRODUCT. Some states do not allow the exclusive of imitation of incidental
or consequential damages or limitations on how long an implied warranty lasts; so these limitations or
exclusions may not apply to you. This warranty gives you specific legal rights and you may also have
other rights which vary from state to state.
4. HOW TO GET WARRANTY SERVICE:
To obtain warranty service, please call the following web address:
www.lgeservice.com
For Your Safety
Important Information
This user guide contains important information on the use and
operation of this phone. Please read all the information
carefully for optimal performance and to prevent any damage
to or misuse of the phone. Any changes or modifications not
expressly approved in this user guide could void your warranty
for this equipment.
Before You Start
Safety Instructions
WARNING! To reduce the possibility of electric shock, do not
expose your phone to high humidity areas, such as the
bathroom, swimming pool, etc.
Always store your phone away from heat. Never store your
phone in settings that may expose it to temperatures less than
32°F or greater than 104°F, such as outside during extreme
weather conditions or in your car on a hot day. Exposure to
excessive cold or heat will result in malfunction, damage
and/or catastrophic failure.
Be careful when using your phone near other electronic
devices. RF emissions from your mobile phone may affect
nearby in adequately shielded electronic equipment. You
should consult with manufacturers of any personal medical
devices such as pacemakers and hearing aides to determine if
they are susceptible to interference from your mobile phone.
Turn off your phone in a medical facility or at a gas station.
Never place your phone in a microwave oven as this will
cause the battery to explode.
IMPORTANT! Please read the TIA SAFETY INFORMATION on
page 78 before using your phone.
Safety Information
Read these simple guidelines. Breaking the rules may be
dangerous or illegal. Further detailed information is given in this
user guide.
] Never use an unapproved battery since this could damage
the phone and/or battery and could cause the battery to
explode.
] Never place your phone in a microwave oven as it will
cause the battery to explode.
] Do not dispose of your battery by fire or with hazardous or
flammable materials.
] Make sure that no sharp-edged items come into contact
with the battery. There is a risk of this causing a fire.
] Store the battery in a place out of reach of children.
] Be careful that children do not swallow any parts such as
rubber plugs (earphone, connection parts of the phone,
etc.). This could cause asphyxiation or suffocation.
For Your Safety
] Unplug the power cord and charger during lightning storms
to avoid electric shock or fire.
] When riding in a car, do not leave your phone or set up the
hands-free kit near to the air bag. If wireless equipment is
improperly installed and the air bag is activated, you may be
seriously injured.
] Do not place any heavy items on the power cord. Do not
allow the power cord to be crimped as it may cause fire or
electric shock.
] Do not handle the phone with wet hands while it is being
charged. It may cause an electric shock or seriously
damage your phone.
] Do not use a hand-held phone while driving.
] Do not disassemble the phone.
] Do not use the phone in areas where its use is prohibited.
(For example: aircraft).
] Do not place or answer calls while charging the phone as it
may short-circuit the phone and/or cause electric shock or
fire.
] Do not expose the battery charger or adapter to direct
sunlight or use it in places with high humidity, such as a
bathroom.
] Never store your phone in temperatures less than- 4°F or
greater than 122°F.
] Do not use harsh chemicals (such as alcohol, benzene,
thinners, etc.) or detergents to clean your phone. There is a
risk of this causing a fire.
] Do not drop, strike, or shake your phone severely. Such
actions may harm the internal circuit boards of the phone.
] Do not use your phone in high explosive areas as the phone
may generate sparks.
] Only use the batteries, antennas, and chargers provided by
LG. The warranty will not be applied to products provided by
other suppliers.
] Only authorized personnel should service the phone and its
accessories. Faulty installation or service may result in
accidents and consequently invalidate the warranty.
] Do not hold or let the antenna come in contact with your
body during a call.
] An emergency call can be made only within a service area.
For an emergency call, make sure that you are within a
service area and that the phone is turned on.
] Do not damage the power cord by bending, twisting, pulling,
or heating. Do not use the plug if it is loose as it may cause
a fire or electric shock.
For Your Safety
FCC RF Exposure Information
Body-worn Operation
WARNING! Read this information before operating the phone.
This device was tested for typical body-worn operations with
the back of the phone kept 0.79 inches (2cm) between the
user’s body and the back of the phone. To comply with FCC RF
exposure requirements, a minimum separation distance of 0.79
inches(2cm) must be maintained between the user's body
and the back of the phone. Third-party belt-clips, holsters, and
similar accessories containing metallic components should not
be used. Body-worn accessories that cannot maintain 0.79
inches(2cm) separation distance between the user's body
and the back of the phone, and have not been tested for typical
body-worn operations may not comply with FCC RF exposure
limits and should be avoided.
In August 1996, the Federal Communications (FCC) of he United
States, with its action in Report and Order FCC 96-326, adopted
an updated safety standard for human exposure to radio
frequency (RF) electromagnetic energy emitted by FCC
regulated transmitters. Those guidelines are consistent with
the safety standard previously set by both U.S. and
international standards bodies.
The design of this phone complies with the FCC guidelines and
these international standards.
CAUTION
Use only the supplied and approved antenna. Use of
unauthorized antennas or modifications could impair call
quality, damage the phone, void your warranty and/or result in
violation of FCC regulations. Do not use the phone with a
damaged antenna. If a damaged antenna comes into contact
with skin, a minor burn may result. Contact your local dealer
for a replacement antenna.
10
For Your Safety
Vehicle Mounted External Antenna
(optional, if available)
A minimum separation distance of 8 inches (20cm) must be
maintained between the user/bystander and the vehicle
mounted external antenna to satisfy FCC RF exposure
requirements. For more information about RF exposure, visit
the FCC website at www.fcc.gov
FCC Part 15 Class B Compliance
This device and its accessories comply with part 15 of FCC
rules. Operation is subject to the following two conditions:
(1) This device and its accessories may not cause harmful
interference, and (2) this device and its accessories must
accept any interference received, including interference that
may cause undesired operation.
Battery Disposal
] Please dispose of your battery properly or bring to your
local wireless carrier for recycling.
] Do not dispose in fire or with hazardous or flammable
materials.
Adapter (Charger) Cautions
] Using the wrong battery charger could damage your phone
and void your warranty.
] The adapter or battery charger is intended for indoor use
only.
Do not expose the adapter or battery charger to direct sunlight
or use it in places with high humidity, such as the bathroom.
Cautions for Battery
] Do not disassemble.
] Do not short-circuit.
] Do not expose to high temperature: 60°C (140°F).]
] Do not incinerate.
11
CB630_Eng_0214
2/20/08
3:22 PM
Page 10
General Functions
Making a Call
Making International Calls
1. Make sure your phone is powered on.
1. Press and hold the
key and the
international access character ‘+’ will
appear.
2. Enter a phone number including the area
code. To edit a number on the display
screen, simply press the
key to erase
one digit at a time.
] Press and hold the
key to erase the
entire number.
3. Press the
number.
[SEND] key to call the
4. When finished, press the
[END] key.
Making a Call by Send Key
1. Press the
[SEND] key, and the most
recent incoming, outgoing and missed
phone numbers will be displayed.
2. Select the desired number by using the
navigation key.
3. Press the
10
[SEND] key.
2. Enter the country code, area code, and the
phone number.
3. Press the
[SEND] key.
Ending a Call
When you have finished a call, press the
[END] key.
Making a Call From the Contacts
You can store names and phone numbers
dialed frequently in the SmartChip as well as
in the phone memory known as the Contacts.
You can dial a number by simply selecting a
name in the contacts and pressing the
[SEND] key.
CB630_Eng_0214
2/20/08
3:22 PM
Page 11
General Functions
Adjusting the Volume
During a call, if you want to adjust the
earpiece volume, use the side keys of the
phone.
In idle mode, you can adjust the ring volume
using the side keys.
Answering a Call
When you receive a call, the phone rings and
the flashing phone icon appears on the screen.
If the caller can be identified, the caller’s phone
number (or name if stored in your Address
Book) is displayed.
1. Open the Slide and press the
[SEND]
key or the left soft key to answer an
incoming call. If Any Key has been set as
the answer mode (Menu 9.5.4), any key
press will answer a call except for the
[END] key or the right soft key.
n Note
] To reject an incoming call, press and hold the
side keys on the left side of the phone.
] If Slide Open has been set as the Answer
2. End the call by closing the phone or
pressing the
[END] key.
n Notice
You can answer a call while using the Address
Book or other menu features.
Vibrate Mode (Quick)
Vibrate Mode can be activated by pressing and
holding down the
[Star] key.
Signal Strength
If you are inside a building, being near a
window may give you better reception. You can
see the strength of your signal by the signal
indicator on your phone’s display screen.
Entering Text
You can enter alphanumeric characters by
using the phone’s keypad. For example, storing
names in the Address Book, writing a
message, or creating scheduling events in the
calendar all require entering text.
The following text input methods are available
on the phone.
Mode (Menu 9.5.4), you do not need to press
any key. You can answer the call simply by
opening the slide.
11
CB630_Eng_0214
2/20/08
3:22 PM
Page 12
General Functions
T9 Mode
Changing the Text Input Mode
This mode allows you to enter words with only
one keystroke per letter. Each key on the
keypad has more than one letter. The T9 mode
automatically compares your keystrokes with
an internal linguistic dictionary to determine
the correct word, thus requiring far fewer
keystrokes than the traditional ABC mode.
Change the text input mode by pressing
You can check the current text input mode in
the upper right corner of the screen.
ABC Mode
This mode allows you to enter letters by
pressing the key labeled with the required
letter once, twice, three or four times until the
letter is displayed.
123 Mode (Numbers Mode)
Type numbers using one keystroke per number.
To change to 123 mode in a text entry field,
press
key until 123 mode is displayed.
A long press changes the mode to 123.
Symbolic Mode
This mode allows you to enter special
characters.
n Note
You can select a different T9 language from the
menu option. The default setting on the phone is
T9 disabled mode.
12
Using the T9 Mode
The T9 predictive text input mode allows you
to enter words easily with a minimum number
of key presses. As you press each key, the
phone begins to display the characters that it
thinks you are typing based on a built-in
dictionary. As new letters are added, the word
changes to reflect the most likely candidate
from the dictionary.
1. When you are in the T9 predictive text input
mode, start entering a word by pressing
keys
to
. Press one key per letter.
] The word changes as letters are typed -
ignore what’s on the screen until the
word is typed completely.
] If the word is still incorrect after typing
completely, press the
[Star] key
once or more to cycle through the other
word options.
] If the desired word is missing from the
word choices list, add it by using the ABC
mode.
CB630_Eng_0214
2/20/08
3:22 PM
Page 13
General Functions
2. Enter the whole word before editing or
deleting any keystrokes.
3. Complete each word with a space by
pressing the
key or the right
navigation key.
Key
Characters in the Order Display
Upper Case
Lower Case
.,'@?!-:/1
.,'@?!-:/1
ABC2
abc2
DEF3
def3
GHI4
ghi4
JKL5
jkl5
MNO6
mno6
PQRS7
pqrs7
TUV8
tuv8
Using the ABC Mode
Use the keypad keys to enter your text.
WXYZ9
Space Key,
0 (Long press)
wxyz9
Space Key,
0 (Long press)
To delete letters, press
. Press and hold
down
to erase the letters continuously.
n Notice
To exit the text input mode without saving your
input, press the
[END] key.
1. Press the key labeled with the required
letter:
] Once for the first letter
] Twice for the second letter
] And so on
2. To insert a space, press the
key once.
To delete letters, press the
key. Press
and hold down the
key to erase the
letters continuously.
Using the 123 (Numbers) Mode
The 123 Mode enables you to enter numbers in
a text message (a telephone number, for
example) more quickly.
Press the keys corresponding to the required
digits before manually switching back to the
appropriate text entry mode.
n Note
Refer to the table below for more information on
the characters available using the keys.
13
CB630_Eng_0214
2/20/08
3:22 PM
General Functions
Using the Symbol Mode
The Symbol Mode enables you to enter various
symbols or special characters.
To enter a symbol, press the
[Star] key.
Use the navigation keys to select the desired
symbol and press the [OK] key.
T9 dictionary
The T9 dictionary is a feature that allows the
user to add any unique or personal words to
the T9 standard language database. The T9
dictionary function can be selected from the
Text Entry Settings sub menu under the Options
soft key menu. Within the T9 dictionary
function, the user can add, modify, delete or
reset personal words.
14
Page 14
CB630_Eng_0214
2/20/08
3:22 PM
Page 15
Selecting Functions and Options
Your phone offers a set of functions that allow you to customize the phone. These functions are
arranged in menus and sub-menus, accessed via the two soft keys marked the left soft
key
and the right soft
key. Each menu and sub-menu allows you to view and alter the settings of
a particular function.
Soft key functions vary depending on the mode of the phone. The label on the bottom of the
display screen immediately above the soft keys indicates the current function.
15
CB630_Eng_0214
2/20/08
3:22 PM
Page 16
In-Call Menu
Your phone provides a number of control
functions that you can use during a call. To
access these functions during a call, press the
right soft key [Options].
During a Call
The menu displayed on the handset screen
during a call is different from the default main
menu displayed when in idle screen, and the
options are described below.
Making a Second Call
You can select a number you wish to dial from
the Address Book to make a second call. Press
the right soft key then select Address Book.
Answering an Incoming Call
To answer an incoming call when the handset
is ringing, simply press the
[SEND] key.
The handset is also able to warn you of an
incoming call while you are already on a call. A
tone sounds in the earpiece, and the display
will show that a second call is waiting. This
feature, known as Call Waiting, is only
available if your network supports it.
If Call Waiting is on, you can put the first call
on hold and answer the second call, by
pressing the
[SEND] key.
Rejecting an Incoming Call
Swapping Between Two Calls
You can reject an incoming call without
answering by simply pressing the
[END]
key.
By using three methods, you can switch
between two calls.
During a call, you can reject an incoming call
by pressing the
[END] key.
1. Press the [send] key.
Muting the Microphone
2. Press the left/right navigation key.
3. Press the right soft key and then select "
Swap Calls".
16
In open the slide, you can mute the microphone
during a call by pressing the left soft key
[Mute]. The handset can be unmuted by
pressing the left soft key [Unmute]. When the
handset is muted, the caller cannot hear you,
but you can still hear the caller.
CB630_Eng_0214
2/20/08
3:22 PM
Page 17
In-Call Menu
Using the Speakerphone
You can use the integrated Speakerphone
during a call by pressing the
key. The
loudspeaker is automatically deactivated when
you end the call.
n Warning
Due to higher volume levels, don’t place the
phone near your ear while the speakerphone is
enabled.
Video Share Calling
Making and Answering a Video
Share Call
You can make and answer a Video Share Call
with other 3G video phones. The other party
must have a 3G Video-Share capable phone
and be in a video service 3G coverage area.
n Note
Before you start a Video Share Call you must
check the following:
• Phone must be in a AT&T 3G service area.
• Phone needs the presence of ‘GLOBE’ (you can
see the
on the left hand of the icon bar on
the screen.)
• Select the service via the Video Share menu
(see Menu 9.5.0).
To use Video Share follow these steps:
1. Make a phone call by dialing the number,
selecting the number from your contact list
or selecting the number from the list of calls
you have made or received.
2. Once the connection has been established,
after a few seconds the ‘Video Share Ready’
prompt will be displayed on the screen
provided the other party is also Video Share
enabled and in a 3G coverage area. Then,
you are ready to begin sharing your video
with the other party (or have video shared
with you). (If you set Initial Notification to On
from the Video Share (Menu 9.5.0), a
notification pop-up window will be
displayed. Select Yes and you will be
connected directly to live Video Share
Calling).
3. To send video to the other party, simply
press the camera button OR the right soft
key
[Options] - [Video Sharing] and
select a Video Share type (Live or Recorded).
Simply, press the Camera button and the live
Video Share Call will start.
17
CB630_Eng_0214
2/20/08
3:22 PM
Page 18
In-Call Menu
n Note
The Speakerphone will be automatically
activated when a Video Share session begins,
unless a hands-free (Bluetooth or wired head set)
is connected.
- Live: You can share a real-time video stream
with the other party while having a
conversation.
- Recorded: You can share a pre-recorded video
clip with the other party while having a
conversation.
(Note that you can share only H.263 QCIF sized
video files)
4. If the other party accepts your request, a
video share session begins.
(It takes several seconds for the other party
to accept your invitation and start the Video
Share Call.)
navigation keys by pressing the left soft key
Stop: stops video sharing and proceeds
with voice call only.
Brightness: adjusts the brightness of the
screen.
Mute/Unmute: mute/unmute the
microphone.
Spk. Off/Spk. On: when Spk. On is
selected, you can have a conversation using
the speakerphone. When Spk Off is selected,
you can have a conversation using the
headset.
You can record a current video clip via Options
menu, and the recorded video will be saved in
[My stuff] – [Video].
5. Select the STOP menu item to stop sending
video, or press the End key [End Call] to
finish the call, or turn off the handset.
n Note
1. A Video Share Call will be terminated in the
following cases:
• When trying to make a conference call /
second call during a Video Share Call.
During the Video Share session with the other
party, you can select a menu item using the
18
• When the voice call is disconnected.
CB630_Eng_0214
2/20/08
3:22 PM
Page 19
In-Call Menu
• When moving out of a AT&T 3G service area.
Landscape: displays the incoming video
stream in landscape mode.
Mute/Unmute: mute/unmute the
microphone.
Spk. Off/Spk. On: when Spk. On is
selected, you can have a conversation using
the speakerphone. When Spk. Off is selected,
you can have a conversation using the
headset.
• When the network connection is poor.
2. A Video Share Call will be unavailable in the
following cases (“Video Share Ready”
message will be greyed out).
• When trying to make a conference call /
second call during a Video Share Call.
• When holding or being held in a call.
• When moving out of a AT&T 3G service area.
“To receive a Video Share session:”
1. If you receive a Video Share request during a
call, select
[Accept] to accept the
request. If you don’t want to accept the
request, press
[Decline]. When you're a
recipient of a Video Share session, the
following menu items are available:
n Note
• The speakerphone will be automatically turned
on when a Video Share Call begins, and
automatically back to the previous mode when
a Video Share Call ends.
• If a hands-free or a Bluetooth headset is
connected, then the speakerphone menu will
be deactivated.
Making a Video Share Call in
Camera & Recording mode
When you are in Camera & Recording mode,
you can easily make a Video Share Call to a
person in your Contact List.
Stop: stops video sharing and proceeds
with voice call only.
1. Press the right soft key
[Options] in
Take Photo/Record Video mode and select
[Video Share]. (This menu item is displayed
only in 3G coverage. If it is unavailable, you
19
CB630_Eng_0214
2/20/08
3:22 PM
Page 20
In-Call Menu
will not be able to select from this menu
item.)
2. This screen provides you with three options
to make a Video Share Call:
a. Enter a number directly.
b. Select a number from the list of recent
video sharers (last five numbers).
c. Select a number from the contact list.
n Note
• If the other party is not available for a Video
Share Call, then the call will remain as a
normal voice call.
Saving your Video Share
You can save your Video Share session if you
are the sender. There will be a prompt asking if
you would like to save or discard the video at
the end of the Video Share session. If you
choose to save the video, it will be saved in
the "My Stuff," folder in your phone.
20
Conference Calls
The conference service provides you with the
ability to have a simultaneous conversation
with more than one caller. The conference call
feature can be used only if your network
service provider supports this feature.
A conference call can only be set up when you
have one call active and one call on hold,
meaning both calls must have been answered.
Once a conference call is set up, calls may be
added, disconnected or separated (that is,
removed from the conference call but still
connected to you) by the person who set up
the conference call. These options are all
available from the In-Call menu. The maximum
number of callers in a conference call is five.
Once started, you are in control of the
conference call, and only you can add calls to
the conference call.
Making a Second Call
You can make a second call while currently on
a call simply by entering the second number
and pressing the
[SEND] key. When the
second call is connected, the first call is
automatically placed on hold. You can swap
between calls, by pressing the
[SEND]
key.
CB630_Eng_0214
2/20/08
3:22 PM
Page 21
In-Call Menu
Setting Up a Conference Call
Ending a Conference Call
To set up a conference call, place one call on
hold, conference in the second active call by
pressing the right soft key and select the Join
Calls sub menu option from the Conference
Call menu.
Currently active conference call can be
disconnected by pressing the
[END] key.
Activate the Conference Call on
Hold
To activate a conference call on hold, press the
[SEND] key.
Adding Calls to the Conference
Call
To add a call to an existing conference call,
press the right soft key, and then select the
Join Calls sub menu from the Conference Call
option.
Private Call in a Conference Call
To have a private call with one caller from a
conference call, press the right soft key and
select the Private Menu from the Conference
Call option. When the numbers of the callers
are displayed, select the one you wish to speak
in private.
21
CB630_Eng_0214
2/20/08
3:22 PM
Page 22
Menu Tree
The following illustration shows the available menu structure and indicates the:
] Number assigned to each menu option.
] Page where you can find the feature description.
1. Cellular Video (see page 36)
2. Messaging (see page 37)
2.1 New Message
2.2 Inbox
2.3 IM
2.4 Mobile Email
2.5 Drafts
2.6 Outbox
2.7 Sent
2.8 Voicemail
2.9 Templates
2.9.1 Text Templates
2.9.2 Multimedia Templates
2.9.3 Signature
2.0 Message Settings
2.0.1 Text Message
2.0.2 Multimedia Message
2.0.3 Voicemail
2.0.4 Service Messages
22
3. Recent Calls (see page 49)
3.1 Missed Calls
3.2 Dialed Calls
3.3 Received Calls
3.4 All Calls
3.5 Call Duration
3.6 Data Counter
4. MEdia Net (see page 51)
4.1 MEdia Net Home
4.2 Bookmarks
4.3 Saved Pages
4.4 Enter URL
4.5 Recent Pages
4.6 Security
4.7 Browser Settings
4.7.1 Accounts
4.7.2 Primary Storage
4.7.3 Cache Settings
4.7.4 Cookie Settings
4.7.5 Character Encoding
4.7.6 Scrolling Control
4.7.7 Show Image
4.7.8 AuthWallet
CB630_Eng_0214
2/20/08
3:22 PM
Page 23
Menu Tree
5. AT&T Mall (see page 55)
5.1 Shop Ringtones
5.2 Shop Games
5.3 Shop Graphics
5.4 Shop Multimedia
5.5 Shop Applications
5.6 Shop Videos
5.7 MEdia Net Home
6. AT&T Music (see page 56)
6.1 Music Player
6.2 Shop Music
6.3 MusicID
6.4 XM Radio
6.5 Music Videos
6.6 The Buzz
6.7 Community
6.8 Music Apps
7. My Stuff (see page 64)
7.1 Games
7.2 Applications
7.3 Audio & Ringtones
7.4 Pictures
7.5 Videos
7.6 Tools
7.6.1 Voice Command
7.6.2 Alarm Clock
7.6.3 Calendar
7.6.4 Notepad
7.6.5 Calculator
7.6.6 Tip Calculator
7.6.7 World Clock
7.6.8 Tasks
7.6.9 Stop Watch
7.6.0 Unit Converter
7.6.* Date Finder
7.6.# D-Day Counter
7.7 Camera & Recordings
7.7.1 Take Photo
7.7.2 Record Video
7.7.3 Record Voice
7.8 Other Files
7.9 Memory Card
23
CB630_Eng_0214
2/20/08
3:22 PM
Page 24
Menu Tree
8. Address Book (see page 74)
8.1 Contact List
8.2 New Contact
8.3 Caller Groups
8.4 Speed Dial List
8.5 Copy All Contacts
8.6 Delete All Contacts
8.7 Service Dial Numbers
8.8 My Business Card
8.9 View Options
8.0 My Numbers
24
9. Settings (see page 76)
9.1 Audio & Ringtones
9.1.1 Shop Tones
9.1.2 Ringtones
9.1.3 Volume
9.1.4 Message Alert Tones
9.1.5 Alert Type
9.1.6 Key Tones
9.1.7 Increasing Ringtone
9.1.8 Power On/Off Tones
9.2 Display
9.2.1 Shop Graphics
9.2.2 Wallpapers
9.2.3 Backlight Timer
9.2.4 Brightness
9.2.5 Menu Styles
9.2.6 Languages
9.2.7 Dialing Fonts
9.2.8 Clocks & Calendar
9.2.9 Color Schemes
9.3 Bluetooth
9.3.1 Turn On/Off
9.3.2 Search New Device
9.3.3 Paired Devices
9.3.4 Settings
CB630_Eng_0214
2/20/08
3:22 PM
Page 25
Menu Tree
9. Settings (continued)
9.4 Date & Time
9.4.1 Set Date
9.4.2 Date Format
9.4.3 Set Time
9.4.4 Time Format
9.4.5 Auto Update
9.5 Call
9.5.1 Call Forwarding
9.5.2 Send My Number
9.5.3 Auto Redial
9.5.4 Answer Mode
9.5.5 Minute Minder
9.5.6 Call Waiting
9.5.7 Call Reject
9.5.8 TTY
9.5.9 Send DTMF Tones
9.5.0 Video Share
9.6 Security
9.6.1 Auto Key Lock
9.6.2 Lock Handset
9.6.3 PIN Code Request
9.6.4 Fixed Dial Number
9.6.5 Change Codes
9. Settings (continued)
9.7 Connection
9.7.1 Network Profiles
9.7.2 USB Connection Mode
9.8 Flight Mode
9.9 Software Update
9.0 Check Memory
9.0.1 Common
9.0.2 Reserved
9.0.3 SmartChip
9.0.4 Memory Card
9.* Handset Information
9.# Reset Settings
9.#.1 Master Reset
9.#.2 Master Clear
25
CB630_Eng_0214
2/20/08
3:22 PM
Cellular Video
Cellular Video (CV) brings you quick, ondemand access to crystal clear news, sports,
weather and entertainment video clips. Catch
up on TV’s hottest shows, funniest comedians,
biggest headlines and latest sports scores. You
can even personalize your homepage for quick
access to your favorites. In addition, the CV
service automatically streams localized
weather information to your personalized
“News & Weather” page each and every day.
To access CV:
1. From standby mode, press the Left Soft Key
to access the Menu.
2. Scroll to and select CV (option 6).
3. Select a category and play a clip.
26
Page 26
CB630_Eng_0214
2/20/08
3:22 PM
Page 27
Messaging
This menu includes functions related to SMS
(Short Message Service), MMS (Multimedia
Message Service), voice mail, as well as the
network’s service messages.
n Note
New Message
] Video: You can insert a video clip by using
Menu 2.1
n Note
If you select a graphic or an audio file while
writing a multimedia message, the file loading
time will take about 5 seconds. You will not be
able to activate any key during the file loading
time. When the file loading is complete, you will
be able to write a multimedia message.
Editing a message
The following options are available for Editing
a Message. (Press the left soft key [Insert])
] Symbol: You can insert symbols ranging
from sentence notes to emoticons. Select
the one you want by navigating the left/right
soft keys [Previous/Next].
] Graphic: You can select a graphic image by
using the left/right navigation keys. You can
preview the selected picture by pressing the
left soft key [View].
] Audio: You can insert various ringtones.
vCard, vCalendar, vNote and vTask are created by
Address Book, Calendar, Notepad and Tasks
respectively. Go to the Tools and Address Book
sections for more detailed information.
the center key [Insert].
] New Photo: You can insert a new image
taken from the camera by pressing
[Capture]. The following camera options are
available when you press [Options]:
• Resolution: The resolution of the image
can be captured in 1600*1200/1280*960/
640*480/ 320*240/160*120.
• Quality: The quality of the captured image
can be Super Fine/Fine/Normal.
• Primary Storage: You can assign the
primary storage to Handset or Memory
Card.
• Flash: You can set the flash when you
take a photo in dark place.
• Self Timer: Camera timer can be set to
Off/ 3 Seconds/5 Seconds/10 Seconds.
• Advanced Settings: Set the White
Balance as Auto/Daylight/
Incandescent/Cloudy/Fluorescent/
27
CB630_Eng_0214
2/20/08
3:22 PM
Page 28
Messaging
Night mode. Color Effects includes
options such as Color/ Sepia/
Mono/Negative. Shutter Tones can be
set to Tone 1/ Tone 2/ Tone 3/ Off.
• Default Settings: Allows you to set to the
default settings.
] New Audio: You can record a new audio by
pressing the center key [Record]. After
recording a new audio, you can cancel it by
pressing the right key [Cancel]. To control the
new audio menu, choose [Options] by
pressing the right key. Under [Options],
choose one of following
• Quality: Set the audio’s quality to Fine,
Normal or Economy.
• Primary Storage: You can assign the
primary storage to Handset Memory or
Memory Card.
] New Video: You can record new video by
pressing the center key [Record].
] Subject: Type a subject into the message.
] Others: Allows you to insert vCard,
vCalendar, vNote or vTask.
] Template
- Text: You can easily insert the frequently
used sentences in the text message.
28
- Multimedia: The preset multimedia
templates are available.
- Signature: Input your own signature
created in (Menu 2.9.3). For further details,
see page 47.
] Contact: You can browse one of your
contacts and insert it.
] Slide: You can insert a slide and place it to
Insert Slide Before or Insert Slide After.
Using Options
Press right soft key [Options].
• Preview: Shows the created multimedia
message before sending it.(Only for
Multimedia Message)
• View Attachment: Shows the attached
file.
• Save to Drafts: Saves the selected
message to draft.
• Remove: Removes the selected
multimedia or vObject.(Only for Multimedia
Message)
• Select Slide: If the message has more
than one slide, you can select and move to
the desired slide.(Only for Multimedia
Message)
CB630_Eng_0214
2/20/08
3:22 PM
Page 29
Messaging
• Set Slide: Sets the Duration, Text color
and background color of the selected slide.
(Only for Multimedia Message)
• Settings (Only for Multimedia Message)
- Priority: You can set the priority of the
message you choose.
- Delivery Receipt: If it is set to Yes in
this menu, you can check whether your
message is sent successfully.
- Request Read Receipt: This menu
allows you to determine whether to
request a read confirmation mail to a
recipient.
• Text Entry Mode: Sets the text input
mode. For more details, refer to Entering
Text (page 21).
• Text Entry Settings: Text Entry Languages
allows you to set the text entry language
to English, Spanish or French. T9 Next
Word Prediction is available when it is set
to On. Use T9 Dictionary to add words or
delete/reset/modify words.
• Cancel: Allows you to exit the text input
mode without saving your input message.
Sending a Message
After completing a message using the
Insert/Options, select Send To to send a
message.
• Enter the recipient(s) as To, Cc and Bcc. You
can use the Contacts option to choose a
recipient.
• Press the right soft key [Options].
You can insert symbols, refer to recent
messages, recent calls and caller groups to set
as a recipient, and edit your message. For the
Save to Drafts, Text Entry Mode, Text Entry
Settings and Cancel options, see the
descriptions above.
Inbox
Menu 2.2
You will be alerted when you receive a
message. They will be stored in the Inbox. In
the Inbox, you can identify each message by
icons. If you are notified that you have received
a multimedia message, you can download the
whole multimedia message by selecting it in
the Receive menu.
The following [Options] are available in the
Inbox list.
] Call: You can make a voice call.
29
CB630_Eng_0214
2/20/08
3:22 PM
Page 30
Messaging
] Save Contact Info: You can save the
sender's phone number in the Contact List.
] Delete: You can delete the current message.
] Forward: You can forward the selected
message to another party.
] Reply All: Allows you to reply to all
recipients on the selected message (Only for
Multimedia messages).
] Information: You can view information
about received messages; Message type,
Subject, Sender's address, Message date &
time, Priority, Message size, Attached Files
(Only for Multimedia messages).
] Multi Delete: Deletes a number of
messages you have selected from the folder.
] Delete All Read Messages: You can
delete all read messages.
] Delete All: You can delete all messages.
] Cancel: Allows you to exit the options
menu.
IM
Menu 2.3
The Instant Messaging feature can only be
used with the support of the network operator
or communities such as AIM, Windows Live
and Y! Messenger. For Instant Messaging
users, a valid User ID and Password will be
required in order to login and exchange
messages as well as checking the online
status.
1. Through the Main Menu.
2. Through the IM hotkey (the right navigation
key). Short pressing the hotkey will bring up
the available IM clients. The menu items
below might not appear since not all IM
communities support the various options.
Also the menu strings may appear differently
based on the selected IM communities. The
keywords such as User ID, Login and Contact
will be used as general terms in IM menus
according to the currently selected
communities such as AIM, Windows Live
and Y! Messenger.
Offline Menu
Sign On
This allows users to login by filling in the User
ID and Password.
30
CB630_Eng_0214
2/20/08
3:22 PM
Page 31
Messaging
n Note
Once the User ID and Password are saved, you
will not be required to type them in again during
Login process. This feature is optional.
Saved Conversations
This is where a user can view saved
conversations.
Settings
] Set Sound: Allows you to set on/off an alert
for the Contact when they have activity on
their session.
] Default Provider: Allows you to set the
default IM community to login.
] Auto Sign In: You may set the automatic IM
Login process by choosing between the
When Power On, When IM Start or Off
options.
] Network: You may check your IM Network
Profiles or Server Address information.
IM Information
This indicates the Instant Messaging Client
Information such as Client Name and Version
Number.
Online Menu /
1 to 1 conversation
After a successful Login, a list of contacts with
Screen Names will appear on screen.
Depending on the cursor location in the
contacts, the following menu options will be
available.
When cursor is located on a
Conversations List
n Note
The Conversations List contains both the active
contact where a conversation has taken place as
well as an unknown contact.
n Note
When you select the left/right navigation key or
the Confirm key on the Conversation List, it offers
the ability to view or hide conversations.
] Send to Others: This offers the ability to
send a message to an unknown contact.
When selected, a User ID must be typed in
prior to starting an IM session or
conversation.
] Saved Conversations: You may view or
delete the stored conversation session.
31
CB630_Eng_0214
2/20/08
3:22 PM
Page 32
Messaging
] Search: This allows you to search for the
contact by Email address or name.
] Settings
] Settings: Please refer to the previous
Settings Menu.
] Log Out: This begins the Logout process.
• My Status: Allows you to set your status
to Available, Busy or Invisible.
When cursor is located on a
Contact List
• Set Sound: Allows you to set an alert for
the Contact when they have activity on
their session.
] Add Contact: This adds a new contact to
• Auto Sign On: You may Login to an IM
client automatically with the ‘When Power
On’ or ‘When IM Start’ options.
] Log Out: This begins the Logout process.
When cursor is located on a
Conversation
] End Conversation: This closes the selected
conversation. If an unknown contact was
selected, that contact is deleted.
] Block/Unblock Contact: This allows you
to block/unblock the selected Conversations
Contact.
] View Information: This allows you to view
the User ID and Status Text information.
] Search: This allows you to search for the
contact by Email address or name.
32
the selected contacts’ list; in the meantime
this searches for the contact on the basis of
E-mail Address, First Name, or Last Name.
] Refresh List: This refreshes the present
information on the contacts within the
contacts.
] Send to Others: This offers the ability to
send a message to an unknown contact.
When selected, the User ID must be typed in
prior to starting an IM session or
conversation.
] Saved Conversations: This is where a user
can view saved conversations.
] Search: This allows you to search for the
contact by Email address or name.
] Settings: Please refer to the previous
Settings Menu.
] Log Out: This begins the Logout process.
CB630_Eng_0214
2/20/08
3:22 PM
Page 33
Messaging
When cursor is located on a
Contact
emoticons in the conversation screen.
] Block/Unblock Contact: This allows or
] Add Contact: This adds a new contact to
the selected contacts list; in the meantime
this searches for the contact on the basis of
E-mail Address, First Name, or Last Name.
] Delete Contact: This deletes the selected
Contact.
blocks conversation with the selected
Contact.
] Save Conversation: Stores the currently
active conversation.
] End Conversation: This ends the active
conversation and clears the conversation
buffer.
] Block/Unblock Contact: This allows or
blocks conversation with the selected
Contact.
] Refresh Contact: This refreshes the present
information on the selected contact.
] Settings: Please refer to the previous
Settings Menu.
] Text Entry Mode: Sets the text input mode
such as abc, Abc, ABC, T9 abc, T9 Abc, T9
ABC and 123.
] View Information: This allows you to view
information. It provides User ID, Status Text.
] Text Entry Mode Settings: This selects the
] Search: This allows you to search for the
contact by Email address or name.
] Settings: Please refer to the previous
Settings Menu.
T9 predictive mode Language.
n Note
•
In the conversation window, you can use the
up/down navigation key for scrolling through
the conversation.
•
Maximum number of characters supported by a
message is 800 characters for receiving and
127 characters for sending.
•
The present information might not update in
real time so the “Refresh List”/“Refresh
Contact” option can be used for the most up to
date status.
] Log Out: This begins the Logout process.
Menu options available in the
Conversation screen
] Back To List: This brings the screen back to
the contacts.
] Insert: You can insert Symbol, Template and
33
CB630_Eng_0214
2/20/08
3:22 PM
Page 34
Messaging
Mobile Email
Menu 2.4
Mobile Email allows you to access your Yahoo!
Mail, AOL Mail, AIM Mail, Windows Live Mail,
AT&T Yahoo!, BellSouth Mail and Other
providers accounts on your phone. So, now you
can quickly and easily check your email while
you’re away from your computer.
To Set Up Mobile Email
] Open Mobile Email: Slide out the keyboard,
highlight Mobile Email and press OK.
] Select an Email Provider: Use the joystick
to highlight the email provider you wish to
use and press OK.
] Log In
1. Highlight the ID entry field, press down on
the joystick, and then type in your existing
email ID.
2. Scroll down and highlight the Password
field, press down on the joystick, and
enter your password. Quick Tip: Your
password is case sensitive. Press the
on the keypad to change to lower
case or upper case.
3. To save your password scroll down to
Remember Me and press down on the
joystick to check the box.
34
4. Select Sign In.
] Opening an Email: Just scroll down and
highlight the email subject line you want to
open and press down on the joystick. Once
the email opens, just select Options to reply,
forward, or delete.
] Deleting an Email: Just scroll down to the
email you want to delete, press Options,
then Delete.
For additional details, visit www.att.com/email
Drafts
Menu 2.5
You can view the messages saved as a draft.
The draft messages are listed with the date
and time of when the messages were saved.
The following [Options] are available.
] Call: You can make a voice call.
] Information: Allows you to view the
information on the message.
] Multi Delete: Allows you to delete multiple
messages you select from the folder.
] Delete All: Deletes all messages in the
folder.
] Cancel: Allows you to exit the options
menu.
CB630_Eng_0214
2/20/08
3:22 PM
Page 35
Messaging
Outbox
Menu 2.6
] Edit: Allows you to edit the selected
message.
Outbox is a temporary storage place for
messages waiting to be sent.
] Information: Allows you to view the
When you press the
[SEND] key, you can
make a call to the number of the recipient
number of the selected message.
] Delete All: Deletes all messages in the
information on the message.
folder.
If the message is not sent from the Outbox, you
will receive a sound alert along with a
Message Sending Fail notice on the screen.
Another attempt will be made to send the
failed message and after two unsuccessful
attempts, the message will no longer be sent
automatically order to send the message that
has failed, you must press Resend from the
Options menu.
] Cancel: Allows you to exit the options
After the maximum number of Send attempts
has been reached the Send function has failed.
] Call: You can make a voice call.
menu.
Sent
Menu 2.7
This is where you can view the lists and
contents of sent messages and also verify if
transmission was successful.
The following [Options] are available.
] Delete: Deletes the selected message from
If you were trying to send a text message,
open the message and check that the Sending
options are correct.
] Edit: Allows you to edit the selected
When the message Send has failed, the
following [Options] are available.
] Information: Allows you to view information
] Call: You can make a voice call.
] Delete All: Deletes all messages in the
] Delete: Deletes the selected message
which has failed.
the Sent list.
message.
on the message.
folder.
] Cancel: Allows you to exit the options
menu.
35
CB630_Eng_0214
2/20/08
3:22 PM
Page 36
Messaging
Voicemail
Menu 2.8
This menu provides you with a quick way of
accessing your voice mailbox (if provided by
your network).
Before using this feature, you must enter the
voice server number obtained from your service
provider.
This may already be available; to check the
voicemail, press and hold the
key.
When new voicemail is received, the symbol
will be displayed on the screen.
n Note
Please check with your network service provider
for details of their service in order to configure
the handset accordingly.
] Delete: Allows you to delete the selected
template message.
] Edit: Allows you to write a new message or
edit the selected template message.
] Delete All: Deletes all messages in the
folder.
] Cancel: Allows you to exit the options
menu.
Multimedia Templates (Menu 2.9.2)
1. You can add new multimedia templates by
pressing the left soft key [New].
2. The following choices are available under
Options.
] Preview: You can preview multimedia
messages you have created.
] Text Entry Mode: Sets the text input mode
Templates
Menu 2.9
Text Templates (Menu 2.9.1)
There are 6 predefined messages in the list.
You can view and edit the template messages
or create new messages.
The following [Options] are available.
] Send: Allows you to send the selected
template via Message.
36
as abc, Abc, ABC, T9 abc, T9 Abc, T9 ABC
and 123.
] Text Entry Settings: Text Entry Language
allows you to set the text entry language to
English, Spanish or French. T9 Next Word
Prediction is available when it is set to On.
Use T9 Dictionary to add words or
delete/reset/modify words.
] Cancel: Allows you to exit the text input
mode without saving your message.
CB630_Eng_0214
2/20/08
3:22 PM
Page 37
Messaging
] Validity Period: This network service
Signature (Menu 2.9.3)
This feature allows you to create your Text
signature. You can use symbols, text templates
and contacts as part of the signature.
Message Settings
Menu 2.0
Text Message (Menu 2.0.1)
] Message Center Number: If you want to
send a text message, you can get the
address of the SMS center by using this
menu.
] Email Gateway: You can send the text
message to an Email Address via this
gateway.
] Message Subject: You can enter the SMS
Subject from this menu.
allows you to set how long your multimedia
messages will be stored at the message
center.
] Send Delivery Receipt: Allows you to send
a delivery confirmation mail for a Multimedia
Message.
] Send Read Receipt: Allows you to send a
message read confirmation mail for a
Multimedia Message.
] Download Options
- Download Without Ask: Allows
Multimedia Message to be downloaded
automatically.
- Ask Always: You can download a
multimedia message manually.
] Insert Signature: You can insert your own
- Discard: Used when user reject to
download Multimedia Message.
signature (Menu 2.9.3) that you created.
] Message Center: The details for the
Multimedia Message (Menu 2.0.2)
] Priority: You can set the priority of the
Multimedia gateway are pre-loaded onto
your handset and should not be changed.
message you choose.
] Message Subject: You can enter the MMS
Subject when this menu is on.
37
CB630_Eng_0214
2/20/08
3:22 PM
Messaging
Voicemail (Menu 2.0.3)
This menu allows you to set the voicemail
center number if this feature is supported by
the network service provider. Please check with
your network service provider for details of
their service in order to configure the handset
accordingly.
Service Messages (Menu 2.0.4)
You can set the Service option to determine
whether you will receive service messages or
not.
38
Page 38
CB630_Eng_0214
2/20/08
3:22 PM
Page 39
Recent Calls
You can check the record of missed, received,
and dialed calls only if the network supports
Calling Line Identification (CLI) within the
service area.
The number and name (if available) are
displayed together with the date and time of
the call. You can also view call times.
Received Calls
Menu 3.3
• View the number, if available, and call it or
save it in the Address Book.
• Enter a new name for the number and save
both in the Address Book.
• Send a message using this number.
• Delete the call from the list.
Missed Calls
Menu 3.1
• View the number, if available, and call it or
save it in the Address Book.
• Enter a new name for the number and save
both in the Address Book.
All Calls
Menu 3.4
Allows you to view all of missed, received, and
dialed call records.
• Send a message using this number.
Call Duration
• Delete the call from the list.
This allows you to view the duration of incoming
and outgoing calls. You can also reset the call
times. The following timers are available:
Dialed Calls
Menu 3.2
• View the number, if available, and call it or
save it in the Address Book.
Last Call
• Enter a new name for the number and save
both in the Address Book.
Received Calls
• Send a message using this number.
• Delete the call from the list.
Menu 3.5
Length of the last call.
Length of the incoming calls.
Dialed Calls
Length of outgoing calls.
39
CB630_Eng_0214
2/20/08
3:22 PM
Recent Calls
All Calls
Total length of all calls made and incoming
calls received since the timer was last reset.
Data Counter
Menu 3.6
You can check the Sent, Received or All data
volumes and Reset data counter.
40
Page 40
CB630_Eng_0214
2/20/08
3:22 PM
Page 41
MEdia Net
This menu shows how to access the Internet
by launching the WAP browser.
MEdia Net is one of the services provided by
AT&T and it gives you access to all the cool
things you can do with your wireless phone.
n Note
Check the availability of WAP services, pricing
and tariffs with your network operator and/or the
service provider whose service you wish to use.
Service providers will also give you instructions
on how to use their services.
Please contact your service provider to open an
Internet account.
To launch the browser in standby mode, press
and hold down the
key.
Key
up/down navigation
key
Description
Scroll each line of
the content area
Using the WAP Browser Menu
There are various menus available when
surfing the Internet.
MEdia Net Home
Menu 4.1
This connects to the homepage which is
defined in the activated account. The default
account connects to AT&T’s homepage.
Bookmarks
Menu 4.2
Once connected, the homepage is displayed.
The content depends on the service provider.
This function allows you to store and edit
frequently accessed sites. The following
[Options] are available.
To exit the browser at any time, press the
key. The idle screen is displayed.
n Note
Menus for the Browser
You can surf the Internet using either the
phone keys or the WAP Browser menu.
Using the Navigation Keys
When surfing the Internet, the keys function
differently from phone mode.
Your phone may have some pre-installed
bookmarks for sites not affiliated with LG. LG
does not warrant or endorse these sites. If you
choose to access them, you should take the
same precautions for security or content as you
would with any site.
] View: Display the bookmark title and URL.
41
CB630_Eng_0214
2/20/08
3:22 PM
Page 42
MEdia Net
] Connect: Connect to the selected bookmark
site.
] New: Add a new bookmark manually.
Enter URL
Menu 4.4
Input the URL manually to connect to the
Internet site.
] Edit: Modify the existing bookmark item.
] Delete: Allows you to erase the selected
bookmark.
] Send URL: Allows the bookmark information
Recent Pages
Menu 4.5
You can manage the list of the Internet pages
you visited.
to be sent via SMS to another person.
] Delete All: Allows you to erase all
bookmarks.
] Cancel: Allows you to exit the options
menu.
Menu 4.6
A list of the available certificates is shown.
] Certificates: You can see the list of
certificates and view them in detail.
n Note
] Clear Session: Removes the secure session.
Pre-installed bookmarks cannot be deleted or
edited by users.
In order to change the text input mode for symbol
input, please refer to the General Functions
section.
Saved Pages
Security
Menu 4.3
This saves the page on display as an off-line
file. A maximum of 20 pages can be saved.
Browser Settings
Menu 4.7
Accounts (Menu 4.7.1)
This includes the network information used to
connect the browser to the Internet.
Select the desired account by pressing the soft
key, which is labeled as “Activate”. This will
activate the account that will be used for
future connection.
MEdia Net is the predefined account that is set
as default.
42
CB630_Eng_0214
2/20/08
3:22 PM
Page 43
MEdia Net
] Activate: Select the account among the list
of accounts, so it can be used for future
connection.
] View: Allows you to see the specific
account information.
] Edit: Allows you to change the account
information.
] Delete: Allows you to delete the account.
] New: Allows you to create a maximum of 10
new accounts.
] Cancel: Allows you to exit the options
menu.
n Note
You cannot edit and delete pre-installed
accounts.
6. Security: Select the secure or non-secure
mode.
7. Time Out: Values between 10 to 600
seconds.
8. Network Profile: You can choose one from
the network profiles. Note you can create a
new network profile by selecting the list
option on the center key.
n Note
1. The account information will be available from
your operator.
2. Creating or editing an account requires care.
The browser cannot connect to the Internet if
the account information is not correct.
Primary Storage (Menu 4.7.2)
In order to create a new account, please fill in
the network information.
You can assign the primary storage to
Handset or Memory Card.
1. Account Name: Name associated with
new account.
Cache Settings (Menu 4.7.3)
2. Homepage: Homepage URL.
The web pages you have accessed are stored
in the memory of the phone.
3. Connection Mode: Select from TCP with
Proxy, TCP without Proxy, UDP(CO), UDP(CL).
] Clear Cache: Remove all cached data in the
4. Proxy Address: Proxy server address.
] Allow Cache: Set a value to determine
5. Proxy Port Number: Proxy server’s port
number.
memory.
whether a connection attempt is made
through the cache or not.
43
CB630_Eng_0214
2/20/08
3:22 PM
Page 44
MEdia Net
n Note
AuthWallet (Menu 4.7.8)
A cache is a buffer memory, which is used to
store data temporarily, especially when it is
online.
Cookie Settings (Menu 4.7.4)
The information or services you have accessed
are stored in the cookie.
If set to On, the user’s personal information
such as ID and Password used to access the
Internet site will be saved automatically for
future use.
Online menu
] Delete Cookies: Remove all cookies.
Once you are connected to the Internet, the
following menu options are available:
] Allow Cookies: Set a value to determine
] Back: Moves to the previous page.
whether a connection attempt is made
through the cookie or not.
] Forward: Moves to the next page.
Character Encoding (Menu 4.7.5)
Select a character set from the following list:
1 Automatic
3 English(ISO)
5 Unicode(UCS2 BE)
7 Unicode(UCS2 Auto)
9 Unicode(UTF-16 LE)
* Unicode(UTF-8)
2 English(ASCII)
4 English(LATIN)
6 Unicode(UCS2 LE)
8 Unicode(UTF-16 BE)
0 Unicode(UTF-16 Auto)
Scrolling Control (Menu 4.7.6)
This allows you to determine the scroll speed
and select from 1 Line, 2 Lines or 3 Lines.
Show Image (Menu 4.7.7)
This allows you to view pictures when browsing.
44
] Refresh: Loads the current page again.
] Home: Moves to the initial homepage.
] Enter URL: Connects to the specific URL
after editing.
] Recent Pages: You can manage the list of
the Internet pages you visited.
] Bookmarks: You can add or save the
current page to Bookmark or view the list
saved under Bookmark.
] Settings: You can set browser related
options such as Clear Cache, Clear Cookie,
etc.
] Cancel: Allows you to exit the options
menu.
CB630_Eng_0214
2/20/08
3:22 PM
Page 45
AT&T Mall
Shop Ringtones
Menu 5.1
This menu option connects to AT&T’s ringtone
download site.
Shop Games
Menu 5.2
This menu option connects to AT&T’s game
download site. This allows users to download
the various games by connecting to the
Internet.
Shop Graphics
Menu 5.3
This menu option connects to AT&T’s graphic
download site.
Shop Multimedia
Shop Applications
Menu 5.5
This menu option connects to AT&T’s
application download site. This allows users to
download the various applications by
connecting to the Internet.
Shop Videos
Menu 5.6
This menu option connects to AT&T's video
download site.
MEdia Net Home
Menu 5.7
This connects to the homepage. The homepage
is the site which is defined in the activated
account.
Menu 5.4
This allows you to connect to AT&T's
multimedia download site.
n Note
Additional charges may incur when downloading contents. Contact your service provider for further
information.
45
CB630_Eng_0214
2/20/08
3:22 PM
Page 46
AT&T Music
Music Player
Menu 6.1
] All Songs: You can view the entire songs in
the internal/external memory.
] Playlists: You can create your own playlists
by choosing songs from the All Songs menu
list.
] Artists: Shows the list of artists of all the
songs in internal/external memory, and
shows the song of chosen artist.
] Albums: Shows the list of albums of all the
songs in internal/external memory, and
shows the song of chosen album.
] Genres: Shows the list of genres of all the
songs in internal/external memory, and
shows the song of chosen genre.
n Note
Copyrights of music files may be protected by
copyright and intellectual property laws.
Therefore, it may be required to obtain necessary
permissions or licenses before you can reproduce
or copy the materials. In some countries,
national law prohibits copying of copyrighted
materials for personal archive as well. Prior to
downloading or copying the files, please ensure
that you adhere to the applicable laws and laws
of corresponding countries or regions regarding
the Terms of Use of materials.
46
Playing Music
To listen to music that you have transferred
to your phone, follow these quick easy steps:
Playing Music with the Slide Open
1. Press the left soft key Menu, select AT&T
Music(6), Music Player(1), then All
Songs or Playists(2).
Select a song or playlist.
2. Press
to play/pause. Press up or
down on the Navigation Key to change
the volume, and left or right to go to the
previous or next song.
3. Press the Left Soft Key for Minimize to
access other phone functionality while
music is playing.
4. Press the
key to browse for a song or
playlist again.
Adding Music To Your Handset
Before You Get Started
To transfer music from your PC to your device,
you will need the following:
• Windows Media Player 10 or above
• Music on your PC in one of these formats:
MP3, AAC, AAC+ or WMA
• A MicroSD card (supports up to 4GB cards)
CB630_Eng_0214
2/20/08
3:22 PM
Page 47
AT&T Music
• USB data cable
*microSD card and USB data cable sold
separately; go to att.com/wireless
Adding Music to your Handset
Music files can be added to your handset by
using one or more of the following methods:
• Download music and ringtones over the AT&T
network directly to your device by using the
shopping for music feature.
• From your existing digital media collection
thru Windows Media Player®.
• From music stores through the applicable
music client.
Transferring music using Windows Media
Player
n Note
Music stores may require other software to be
downloaded and separately installed or see User
Guide for use of Windows Explorer to drop and
drag tracks from you computer to phone.
5. Once your music management software is
launched, highlight the track(s) you wish to
transfer to the handset and begin the transfer
process.
n Warning
Do not disconnect phone while the transfer is in
progress.
n Note
Not compatible with iTunes and/or iTunes files.
1. Insert microSD memory card in phone.
Drag and Drop Music Using CB630 As A
Mass Storage Device
2. Connect phone to the computer using USB
cable.
1. Insert a MicroSD memory card.
3. Once the USB cable is connected, the handset
displays "Connected as Music Sync Mode. Do
not disconnect during transfer.”. The
computer screen shows the phone.
4. On the computer, you will be prompted to
launch your preferred music management
software.
2. Power on the phone.
3. Connect the device to a PC using a CB630
USB data cable.
4. A bubble may appear, "Found New Hardware
LG USB Modem".
5. Access My Computer on the PC.
47
CB630_Eng_0214
2/20/08
3:22 PM
Page 48
AT&T Music
6. The phone's memory card will be listed under
"Devices with Removable Storage" in the
same location as an optical drive.
n Note
The PC will automatically assign a drive letter.
7. File explore in a new window for desired
music files.
8. Drag and drop the desired music content
from the PC window to the "Storage Card"
window.
9. Disconnect the device from the cable.
10. Access the Music Player on the phone.
n Note
Sideloading is not supported via Bluetooth.
Transferring Music from the Digital Music
Stores
In order to download music from the computer
to your handset, a microSD card and USB data
cable are required. These items are sold
separately; please visit att.com/wireless to
purchase them.
1. Using your computer, open your preferred
WMDRM PC music management client.
48
2. See steps 1-3 of Transferring music using
Windows Media Player on page 57 for details).
n Note
If the target computer does not detect the newly
connected handset or show the Portable Device
dialog box on the PC screen, please follow steps
3 - 4.
3. See page 85 (USB Connection Mode) for
details.
4. Use the Up or Down Navigation key to
highlight Music Sync and press the Select
soft key or the [OK] key.
5. Highlight the song you wish to download to
the handset.
6. Using your right mouse button, click on the
highlighted song and select Transfer Track(s)
to Portable Device from the drop-down menu.
This step begins the download process.
7. From within the Windows Media Player
application, click on the Sync tab. Previously
downloaded songs are then listed on the left
side of the application.
8. Choose the destination location for the media
files. The CB630 Music Sync Player appears
in a drop-down list on the right side of the
screen.
CB630_Eng_0214
2/20/08
3:22 PM
Page 49
AT&T Music
n Note
If there are no items present in the playlist, click
the Edit Playlist button and begin adding the
music files from among the various media
categories.
3. Once the USB connection has been
established, the handset displays " Connected
as Music Sync Mode. Do not disconnect
during transfer. " and the computer screen
then shows the CB630 device.
9. Click on the checkmark boxes (to the left of
the song entry) to select the song you want
to synchronize to your handset.
4. From within the Windows Media Player
application, click on the Library tab.
10. Click the Start Sync button at the upper
right corner of the application to download
the selected songs to your handset. A
“synchronization in progress” message
appears on the application. Do not unplug
the handset during this process. Once
complete, a Music folder appears below
the CB630 Music Sync Player on the right
of the Sync tab.
6. Right click on the song entry and select, Add
to.. > Additional Playlists.
11. It is now safe to unplug the USB connector
from the handset.
Importing a Playlist from a 3rd Party
Application
1. Open Windows Media Player on your
computer (version 10.0 or higher).
2. Use the USB adapter cable to connect the
handset to the target PC. When you try to
connect handset on your PC, the handset
displays “Connecting as Music Sync...”.
5. From the left side of the Library tab, click on
All Music. The right side of the page is then
populated with all of the songs which the
player has previously found.
7. From the Add to Playlist dialog, click the New
button and type in a unique playlist name.
8. Click OK when you are done entering the new
playlist name. The new Windows Media
playlist is then displayed within the My
Playlist section of the Library tab (left side).
9. Drag and drop the newly created playlist from
the My Playlist section to the phone Music
Sync Player listed just above it. The phone
Music Sync Player appears on the left side of
the screen.
49
CB630_Eng_0214
2/20/08
3:22 PM
Page 50
AT&T Music
n Note
If there are no items present in the playlist, click
the Edit Playlist button and begin adding the
music files from among the various media
categories.
(Please note that all of the existing data will be
erased on microSD card if you use the below
process.)
A. Follow those steps: Settings -> Reset
Settings -> Master Clear -> Memory Card.
10. It is now safe to unplug the USB connector
from the handset.
B. Format external memory using Mass
Storage.
n Note
C. Remove external memory from the phone,
and insert external memory to the phone
and format.
1. If you connect your handset with a Specific
USB Hub on your PC, the above music sync
service may not work. So we recommend a
direct USB Connection on your PC instead.
2. Once you connect your mobile phone to the
PC, the phone's screen will display the
"Connecting as Music Sync..." message. If the
message does not change to "Connected as
Music Sync Mode. Do not disconnect during
transfer.", check if your PC is running Windows
XP and Windows Media Player 10 or later. If
your PC is running Windows XP and Windows
Media Player 9, please download WMP10 or
WMP11 by visiting Microsoft site. If your PC is
running XP and WMP10 or later but
"Connecting as Music Sync..." message does
not disappear from the screen after you have
tried to establish connection three to four
times, perform one of the following methods
and try again.
50
3. If you have connected your handset to PC, and
trying to send file using Music Sync, but the
function is not working properly, please check
the below lists.
A. Check whether the file length you are
transmitting is not too long.
B. Check whether the license of the file you
are transmitting is not expired.
C. Check whether the file you are transmitting
is a right format for your phone (MP3,
WMA, AAC).
If you have checked the above three lists, and
still the file is not transmitted, please try the
actions on 2.
4. If you transfer files as shown below, the
transferred files will not show in a third party
application or in Windows Media Player.
A. Transmitted a file using Mass Storage, but
not using Music Sync function.
CB630_Eng_0214
2/20/08
3:22 PM
Page 51
AT&T Music
B. Transmitted a file by directly inserting
external memory on PC.
5. When you have transferred files with Music
Sync feature and you want to delete them
from your phone, you should connect the
phone to your PC again with Music Sync to
delete them. Even if you have deleted files
transferred with Music Sync feature as shown
below, delete them again with Music Sync.
Otherwise you will not be able to transfer files
identical to the deleted files again.
A. Deleted a file using Mass Storage, but not
using Music Sync function.
B. Deleted a file by directly inserting external
memory on PC.
C. Deleted a file using delete function on the
phone.
n Note
Additional charges may incur when downloading
ringtone.
Contact your service provider for further
information.
MusicID
Menu 6.3
MusicID is an application which uses the
onboard microphone to analyze a song sample
and then compare it to a remote database of
songs. Once the application completes the
analysis of the song sample, it then provides
you with the name of the song, artist and
album art as well as opportunities to buy
related content.
] ID song!: Allows you to find out information
Shop Music
Menu 6.2
Selecting Shop Music from the AT&T Music
sub menu launches the browser to a music
landing page from which you can purchase
music from 3rd party stores and personalization
content from AT&T. Some sites are data
intensive (i.e. previews via streaming) so the
user should have an unlimited MEdia bundle
like the MEdia Max 200.
of unknown music by sending the sound of
the unknown music to the web. If the web
identifies the song, it returns with relevant
information of the song.
] manage IDs: Once a song has been
identified through the MusicID, you can see
the list of songs in this folder.
] help me out: Information for how to use this
java application.
] exit: Ends the application and exits.
51
CB630_Eng_0214
2/20/08
3:22 PM
Page 52
AT&T Music
XM Radio
Menu 6.4
Selecting XM Radio from the AT&T Music sub
menu launches a preinstalled java application.
The application allows the user to listen to
dozens of channels of digital radio on your
mobile phone. Get unlimited access to
commercial-free music, the latest Hip Hop,
R&B, Rock, Jazz, Country anywhere you go.
Warning: This product will use a large amount
of data and you are responsible for all data
charges incurred. AT&T strongly recommends
that you subscribe to a MEdia Max data bundle
IN ADDITION to this purchase. Call AT&T at
611 to sign up for the MEdia Max package if
needed.
Music Videos
Menu 6.5
Selecting Music Videos from the AT&T Music
sub menu launches a browser which takes you
directly into the Music Video section of Cellular
Video. From this menu, you will have access to
music videos from the latest artist as well as
programming from AT&T, MTV,VHI, and CMT
among others. Simply click on a video and
begin watching!
n Note
Additional charges may incur when downloading
music video contents.
Contact your service provider for further information.
The Buzz
Menu 6.6
Selecting The Buzz from the AT&T Music sub
menu launches a preinstalled java application
(e.g. Billboard). The application allows the user
to obtain relevant music industry news and
information including charts, news, and concert
locations.
52
CB630_Eng_0214
2/20/08
3:22 PM
Page 53
AT&T Music
Community
Menu 6.7
Selecting Community from the AT&T Music sub
menu launches the browser to either one or
more of the hot user communities. The
application allows the user to interact with
their friends and the community as well as
review artist fan sites.
Music Apps
Menu 6.8
Selecting Music Apps from the AT&T Music
sub menu launches the browser to an area
where the user can purchase music related
applications for download.
53
CB630_Eng_0214
2/20/08
3:22 PM
Page 54
My Stuff
Games
Menu 7.1
Java is a technology developed by Sun
Microsystems. Similar to the way you would
download the Java Applet using the standard
Netscape or MS Internet Explorer browsers,
Java MIDIet can be downloaded using a WAP
enabled phone. Depending on the service
provider, Java based programs such as Java
games can be downloaded and run on a phone.
Once downloaded, the Java program can be
viewed within the Games menu where you can
select, execute or delete. Java program files
saved in the phone or memory card are in .JAD
and .JAR formats.
n Note
The JAR file is a compressed format of the Java
program and the JAD file is a description file that
includes all detailed information. From the
network, prior to download, you can view all
detailed file descriptions from the JAD file.
n Warning
Only J2ME (Java 2 Micro Edition) based
programs will run in a phone environment.
J2SE (Java 2 Standard Edition) based programs
will only run in a PC environment.
54
] Shop Games: This menu option connects to
AT&T’s game download site.
] Games List: You can see the default and
downloaded games in the list.
Applications
Menu 7.2
This menu displays the list of Java programs
downloaded using WAP. All previous
downloaded programs can be selected,
deleted, or viewed in detail within the
Application menu.
] Shop Applications: This menu option
connects to AT&T’s application download
site.
] Applications List: You can see the
downloaded applications in the list.
Audio & Ringtones
Menu 7.3
] Shop Ringtones: This menu option
connects to AT&T’s ringtone download site.
] Answer Tones: This menu option connects
to AT&T's answer tone download site.
] Record Voice: You can record your own
audio by pressing the center key [OK].
CB630_Eng_0214
2/20/08
3:22 PM
Page 55
My Stuff
] Files: You can view the audio files in the
list.
Pictures
n Note
DRM (Digital Rights Management) Contents
Copyright protected contents.
Menu 7.4
] Shop Graphics: This menu option connects
DRM sometimes restricts some functions, such
as send, and edit. The
indicates content
controlled by DRM protection.
to AT&T’s graphic download site.
Tools
n Note
Additional charges may be incurred when
downloading graphics. Contact your service
provider for further information.
] Take Photo: You can take your own photo
by pressing the center key [OK].
] Make Animated GIF: You can make an
animation file with the selected images in
the list.
] Files: You can view the graphic files in the list.
Videos
Menu 7.5
] Shop Videos: This menu option connects to
AT&T's video download site.
] Record Video: You can record your own
video by pressing the center key [OK].
] Files: You can view the video files in the list.
Menu 7.6
Voice Command (Menu 7.6.1)
n Note
Press and hold down
Voice Command menu.
key to access the
Voice command is the function whereby your
phone's voice recognition engine identifies the
voice of the user and carries out the requested
commands.
When the user operates the voice command
function, there are six possible commands, Call
Someone, Dial Number, Listen Voicemail,
Missed Calls, Messages and Time and Date.
1. Call : this command is
activated when the user says "Call Someone".
When the phone prompts you to "Say a
name," clearly state a name from your
phone's address book, followed by the
corresponding handset retrieval data.
55
CB630_Eng_0214
2/20/08
3:22 PM
Page 56
My Stuff
- Next: cursor moves to the next set of data.
The voice command also has menu
options;
- Yes: make phone call.
• Mode
• Commands available to user
- Cancel: back to the call someone screen.
- Speed: Voice command is abbreviated.
- Exit: terminate voice command.
- Normal: Voice command is played
normally.
2. Listen Voicemail: this command is
activated when the user says the words
Listen Voicemail.
You will be automatically connected to your
voicemail.
3. Missed Calls: this command is activated
when the user says the words Missed Calls.
The mobile phone displays your history of
missed calls.
• Commands available to user
- Yes: make phone call
4. Messages: this command is activated
when the user says the word Messages.
Mobile phone displays details of unread
SMS or MMS messages.
• Commands available to user
- Yes: make phone call
5. Time & Date: this command is activated
when the user says the words Time & Date.
The phone displays the current time and date.
56
• Train
- Answer: Enables the user train for
answers used via voice command.
- Number: Enables the user train for
numbers used via voice command.
• Best Match
- 1 Match: When the user tries to find a
name from the address book via the call
someone function, the most likely match
will be displayed.
- 4 Matches: When the user tries to find a
name from the address book via the call
someone function, the four most likely
matched names will be displayed.
• Speakerphone Mode
- Automatic On: When this option is
selected, sound is loud enough so you can
hear in a distant place.
CB630_Eng_0214
2/20/08
3:22 PM
Page 57
My Stuff
- Off: When this option is selected, sound
is not loud enough so you can hear in a
distant place.
Alarm Clock (Menu 7.6.2)
The alarm function allows you to set up
multiple separate alarms. You can also set the
time, repetition interval and alarm sound.
Select your desired alarm setting to configure
from the alarm list. If there is no alarm setting,
press the left soft key [New] to add a new
alarm.
] Time: Select the desired set time mode
using the navigation key. Input your desired
alarm time by specifying the hour and
minute. If the time is in 12 hour clock format,
you have to select either am’ or pm’ using
the center soft key.
] Repeat: Select the desired repeat mode
using the navigation key.
] Alarm Tone: Select the alarm sound to use
for the alarm using the
] Memo: Input alarm name.
key.
Calendar (Menu 7.6.3)
When you enter this menu a calendar will be
displayed. The square cursor is used to locate
a particular day. The bottom bar on the
calendar indicates schedule(s) for that day. This
function helps to remind you of the schedule.
The phone will sound an alarm tone if it has
been set for a specific schedule item.
Key
Description
up/down navigation key
Weekly
left/right navigation key
Daily
key/
key
Annually
key/
key
Monthly
The following [Options] are available:
] Search: Allows you to search the saved
schedule(s) by pressing the character keys.
] Delete: Allows you to delete the selected
schedule.
] Send Via: Sends the selected schedule by
Message or Bluetooth.
] Set Holiday: Allows you to set your
personal holiday for the selected date.
57
CB630_Eng_0214
2/20/08
3:22 PM
Page 58
My Stuff
] View All: Allows you to view all saved
schedules.
] Go to Date: Allows you to jump to a specific
date.
] Delete Schedules: Deletes the defined
schedules such as Old Schedules, Daily,
Weekly, Monthly or All Schedules.
] Cancel: Allows you to exit the options
menu.
Notepad (Menu 7.6.4)
You can create up to a maximum of 30 memos.
Whenever you press the
key, characters
are sequentially deleted in reverse order.
Tip Calculator (Menu 7.6.6)
This feature allows you to quickly and easily
calculate the tip amount based on the total bill
as well as the split of the total bill based on
the number of people.
World Clock (Menu 7.6.7)
The World clock function provides time
information on major cities worldwide.
1. Select a memo pad you want to edit.
1. You can select a desired city as a base using
the left soft key [Map].
2. Press the left soft key [New] to create a new
memo.
2. You can view the time of desired city using
the right soft key [Options] - [Change City].
3. Input the memo and press the center key
[Save] to save.
Tasks (Menu 7.6.8)
Calculator (Menu 7.6.5)
This feature allows you to save and manage a
task.
The calculator function allows you to add,
subtract, multiply and divide. You can input
numbers using the number keys, and input
operators using the up, down, left, and right
navigation keys.
You can input a decimal point by pressing the
[Star] key.
58
1. To add a new To do item, select the left soft
key [New] in the Task enquiry screen.
2. Input due date, notes, priority and status for
the new Task.
3. Press the left soft key [Save] to save the
Task item.
CB630_Eng_0214
2/20/08
3:22 PM
Page 59
My Stuff
The following [Options] are available in the
Task list.
] Status: Allows you to change the status of
the selected task as In Progress or
Completed.
] Delete: Deletes the selected task.
] Send Via: Enables the selected task to be
sent via Message and Bluetooth.
] Edit: Allows you to edit a saved task.
] View Calendar: The calendar pop-up
window is displayed.
] Delete Tasks: Deletes All Completed, All
Past Tasks or All Tasks.
] Cancel: Allows you to exit the options
menu.
Stop Watch (Menu 7.6.9)
This menu allows you to record the elapsed
time of an event. The duration of an individual
lap time (up to 20 times) and the total time can
be displayed.
] New Time
1. To start timing, press the center key
[Start]. The running time is displayed as
HH.MM.SS.hh (hours, minutes, seconds,
hundredths of a second).
2. During the timing, you can record an
individual lap time by pressing the right
soft key [Lap]. Up to 20 lap times can be
recorded.
3. You can stop or restart timing by pressing
the
key.
4. To reset the stop watch, press the left soft
key [Reset].
] Saved Times: You can see the saved
recorded times which are in the lap time list
of the New Time option.
Unit Converter (Menu 7.6.0)
This function converts any measurement into a
unit you want.
There are 6 types of units that can be
converted: Area, Length, Weight, Temperature,
Volume, and Velocity.
n Note
You can input a decimal number by pressing the
[Star] key.
Date Finder (Menu 7.6.*)
The date finder shows the start date, the
target date and the number of remaining days.
59
CB630_Eng_0214
2/20/08
3:22 PM
Page 60
My Stuff
D-Day Counter (Menu 7.6.#)
] Photo Gallery: You can see saved images
1. To add a new D-Day Counter item, select the
left soft key [New].
] Change to Video Mode: Go to the video
2. Input the Date and notes when you add an
item.
] Video Share: You can make a Video Share
3. Press the left soft key [Save] to save the item.
] Edit: You can edit the selected item.
] Delete: You can delete the selected item.
] Show at Idle Screen: You can see the
Remaining days for this item (D-Day) on the
Idle screen top right corner.
] Delete All: Deletes all saved items.
] Cancel: Allows you to exit the options
menu.
files.
application, enables you to record a video clip.
Call. For more details, refer to ‘Video Share
Calling’ (page 27).
] Resolution: Sets the image size to
1600*1200(default), 1280*960, 640*480,
320*240 or 160*120. The selected image
size appears on the capture screen.
] Quality: You can select the desired quality
of photo by selecting either Super Fine, Fine
or Normal mode by using the navigation
keys.
] Primary Storage: You can assign the
Camera & Recordings
Menu 7.7
Take Photo (Menu 7.7.1)
Using the camera module built into your phone,
you can take pictures of people or events while
on the move. Additionally, you can send photos
to other people in a picture message. The right
soft key [Options] will bring up the following
options.
60
primary storage to Handset or Memory Card.
] Flash: You can set the flash when you take
a photo in dark place.
] Multishot: Allows you to take multishot
photos successively.
] Self Timer: Determines the camera timer.
] Advanced Settings
- White Balance: This adjusts the Light
Effect level and you can select from the
following options: Auto / Daylight /
CB630_Eng_0214
2/20/08
3:22 PM
Page 61
My Stuff
Incandescent / Cloudy / Fluorescent / Night
mode.
- Color Effects: Allows you to apply special
effects to the picture. Press the left or right
navigation key to find the tone you want to
use from the following options: Color,
Sepia, Mono and Negative.
- Shutter Tones: Allows you to select a
sound when you press the shutter. Tone 1 /
Tone 2 / Tone 3 /Off
] Default Settings: This restores the default
camera settings (Size, Brightness, Zoom, etc.).
n Note
In Take Photo mode, you can adjust the zoom
scale by using the up/down navigation keys. The
maximum zoom scale depends on the resolution
as follows.
In Take Photo mode, you can adjust the
brightness by using the left/right navigation key.
n Note
• Zooming: You can zoom in/out using the
up/down navigation keys except 1600*1200
and 1280*960.
• Brightness: You can adjust the brightness
level of the screen using the left/right
navigation keys and there are 9 level of
setting.
Record Video (Menu 7.7.2)
You can record a video clip in this menu by
pressing the Camera key. Before starting to
record, press the right soft key [Options] to set
the following values. Select the desired value
and press the
key to confirm.
] Video Gallery: You can see saved video files.
] Change to Photo Mode: Go to the camera
Resolution
Zoom scale
1600*1200
Level 1
application which enables you to take a still
picture.
1280*960
Level 1
] Video Share: You can make a Video Share
640*480
Level 1~Level 20
320*240
Level 1~Level 20
] Video Record Mode: Sets the recording
160*120
Level 1~Level 20
mode to either MMS Video Mode, Video
Share Mode and General Mode.
Call. For more details, refer to ‘Video Share
Calling’ (page 27).
61
CB630_Eng_0214
2/20/08
3:22 PM
Page 62
My Stuff
] Quality: Determines the quality of a video clip.
] Primary Storage: You can assign the
Resolution
Zoom scale
320*240
Level 1~Level 20
176*144
Level 1~Level 20
primary storage to Handset or Memory
Card.
] Flash: You can set the flash when you video
recording in dark place.
] White Balance: This adjusts the light
effect level and you can select from the
following options: Auto / Daylight /
Incandescent / Cloudy / Fluorescent/ Night
mode.
] Color Effects: Allows you to apply special
effects to the video clip. Press the Left/Right
Navigation Keys to find the tone you want to
want to use from the following options:
Color, Sepia, Mono and Negative.
] Default Settings: This restores the default
camera settings (Size, Brightness, Zoom, etc.).
n Note
In Video Record mode, you can adjust the zoom
scale by using the up/down navigation keys. The
maximum zoom scale depends on the resolution
as follows.
62
In Record Video mode, you can adjust the
brightness by using the left/right navigation keys.
Record Voice (Menu 7.7.3)
You can record an audio clip in this menu. The
recorded audio file is saved automatically in
the Audio & Ringtones menu (Menu 7.3).
The right soft key [Options] will bring up the
following options.
] Record Mode: Sets the recording mode to
either MMS or General.
] Quality: Determines the quality of an audio clip.
] Primary Storage: You can set the primary
storage of the recorded audio to the Handset
Memory or the memory Card.
] Cancel: Allows you to exit the options
menu.
CB630_Eng_0214
2/20/08
3:22 PM
Page 63
My Stuff
Other Files
Menu 7.8
When you receive files of an undefined format
(such as .vcs, .vcf, etc.) via E-mail, the files are
saved in this folder.
The following [Options] are available.
] Delete: You can delete the selected file.
] Rename: You can edit the name of the
selected file.
] New Folder: You can create a new folder.
] Sort By: You can sort the folders by name,
date and type.
] Delete All: You can delete all files.
] Multi Select: You can delete several files at
once.
] Information: You can view information
about the selected folder.
] Cancel: Allows you to exit the options
menu.
Memory Card
Menu 7.9
This function shows the status of the external
microSD card memory.
63
CB630_Eng_0214
2/20/08
3:22 PM
Page 64
Address Book
Contact List
Menu 8.1
This menu allows you to save and manage
contact address information. The Contacts’
functions allow you to add a new address or
search saved contact addresses by name.
New Contact
Menu 8.2
This menu allows you to add a new contact
address. You can enter contact address
information including name, phone numbers,
email addresses, group information items,
memos, ring tones, and image (photograph).
You have to select the Handset or the
SmartChip memory using the left and right
navigation keys.
Speed Dial List
Menu 8.4
This menu allows you to configure the speed
dial numbers. You can select a number from 2
to 9 as a speed dial. You can configure speed
dial numbers for any of the 8 numbers for a
specific contact address so that a contact
address may have multiple speed dial
numbers.
Copy All Contacts
Menu 8.5
This menu allows you to copy all of the
information from your SmartChip, e.g. name,
handset number, etc., to your handset. If a
name is duplicated during the copying
operation, the information is also duplicated.
] SmartChip to Handset: You can copy the
Caller Groups
Menu 8.3
This menu allows you to manage group
information. By default, there are 4 groups:
family, friends, colleagues and school. You can
also configure a ring tone for a group so that
the group ring tone sounds when a call from a
specific contact address within that group
arrives and there is no ring tone configured for
the specific contact address.
64
entry from the SmartChip card to the phone
memory.
] Handset to SmartChip: You can copy the
entry from the handset memory to the
SmartChip card (not all the data will be
copied).
CB630_Eng_0214
2/20/08
3:22 PM
Page 65
Address Book
Delete All Contacts
Menu 8.6
You can delete all entries in the SmartChip
and the Handset.
Press the
mode.
[END] key to return to standby
View Options
My Numbers
Service Dial Numbers
Menu 8.7
You can view the list of Service Dialing
Numbers (SDN) assigned by your network
provider. Such numbers could include the
emergency, directory assistance and voice mail
numbers.
Menu 8.9
You can select different options by which to
display names in your address book: Handset &
Smartchip, Handset Only or Smartchip Only.
Menu 8.0
This displays your phone numbers stored in the
SmartChip.
1. Select the Service dial number option.
2. The names of the available services will be
shown.
3. Use the up/down navigation keys to select a
service. Press the
[SEND] key.
My Business Card
Menu 8.8
This option allows you to make your own name
card. Key in the Name, Mobile number, Home
number, Work number, Fax number and E-mail
address.
65
CB630_Eng_0214
2/20/08
3:22 PM
Page 66
Settings
Audio & Ringtones
Menu 9.1
There can be 4 sound modes: General, Vibrate
All, Silent and Ear Mic. General, Vibrate, and
All Silent modes can be changed from the
Volume menu under Ring tone. In addition,
pressing and holding the
[Star] key on
idle screen mode can swap Normal and
Manner mode. Ear Mic is available when
respective instruments are attached.
Shop Tones (Menu 9.1.1)
Connects to AT&T Ring tone Shops.
Alert Type (Menu 9.1.5)
] Ringtones: Supports 3 ring alert types. Ring,
Ring and Vibration, and Ring after Vibration.
] Message Alert Tones: Supports 6 message
alert types. Ring Once, Ring Every 2 Min,
Ring Every 15 Min, Ring & Vibrate, Vibrate,
Silent.
] Other Alert Tones: You can elect to turn
Other Alert Tones Ring or Silent.
Key Tones (Menu 9.1.6)
Shows and plays ring tones. These can be
downloaded ring tones from Ring tone shops.
This menu option allows you to select a tone
that the phone sounds when a key is pressed.
You can select an option from Beep and
Voice.
Volume (Menu 9.1.3)
Increasing Ringtone (Menu 9.1.7)
This menu controls Ringtone, Key Tone, Call
and Multimedia volume. It is available on Ring
tone volume level 1~7, Vibrate All or Silent All.
Allows you to select an Increasing Ringtone
type which is played when a incoming call. You
can elect to turn this On or Off.
Message Alert Tones (Menu 9.1.4)
Power On/Off Tones (Menu 9.1.8)
Allows you to select an alert tone which is
played when a message is received. You can
select any one from 10 message alert tones.
Allows you to select a Power On/Off tone. You
can elect to turn them to be On or Off.
Ringtones (Menu 9.1.2)
n Note
Full length music tracks cannot be set as ringtones.
66
CB630_Eng_0214
2/20/08
3:22 PM
Page 67
Settings
Display
Menu 9.2
Dialing Fonts (Menu 9.2.7)
Connects to AT&T’s graphic download site.
You can configure the font size and color of the
numbers which appear in the home screen
when you make a call.
Wallpapers (Menu 9.2.2)
Clocks & Calendar (Menu 9.2.8)
You can select the background picture in
standby mode.
This feature allows you to select the internal
LCD clock or Calendar display on the standby
screen.
Shop Graphics (Menu 9.2.1)
Backlight Timer (Menu 9.2.3)
Use this to select whether or not the phone
uses the backlight.
Brightness (Menu 9.2.4)
You can set the brightness of display screen.
Color Schemes (Menu 9.2.9)
You can change the color of the menu, soft key
area, title bar area, and cursor by changing the
Color Schemes.
Menu Styles (Menu 9.2.5)
You can select the Color Schemes from Black,
White, and Pink.
You can configure the menu style to Icon style
or List style.
Bluetooth
Languages (Menu 9.2.6)
You can change the language for the display
text on your phone. This change will also affect
the Language Input mode.
Menu 9.3
Your phone has built-in Bluetooth wireless
technology, which makes it possible for you to
connect your phone wirelessly to other
Bluetooth devices such as a hands free device,
PC, PDA, a remote screen, or other phones.
Only one of the devices registered in your
phone can be connected at a time. (To make a
connection to the same type of device or
change Bluetooth preferences, disconnect the
existing device first.)
67
CB630_Eng_0214
2/20/08
3:22 PM
Page 68
Settings
You can have a conversation via a cordless
Bluetooth hands-free phone or browse the
Internet, wirelessly connected via a mobile
phone.
You can also exchange, for example, business
cards, calendar items and pictures.
MobiTV or XMRadio is supported through Only
Stereo Bluetooth.
Bluetooth A2DP Music Playing is available in
the Music Player Menu.
Hands-free profile
This icon appears when the hands-free
profile is used between the hands-free
device and the phone. This allows you to
call using a Bluetooth connection.
A2DP profile
This icon appears when the A2DP profile
is used between the stereo headset device
and the phone. This allows you to listen to
an audio clip. A2DP is the Advanced
Audio Distribution Profile, which provides
support for streaming either mono or
stereo audio using Bluetooth.
Hand-free +A2DP profile
This icon appears when both profiles of
the hands-free and the A2DP are used
between the compatible device and the
phone. This allows you to call and listen to
an audio clip using a Bluetooth
connection.
For using each device, see a manual that
comes with the device.
n Note
We recommend that your phone and the
Bluetooth device you are communicating with be
no more than 10 meters apart. The connection
may be improved if there are no solid objects in
between your phone and the other Bluetooth
device.
Turn On/Off (Menu 9.3.1)
This menu sets the Bluetooth on or off using
the navigation key.
Search New Device (Menu 9.3.2)
This function allows you to search and add
new device at once.
Paired Devices (Menu 9.3.3)
This function allows you to view the list of all
devices that are paired with your phone at once.
68
CB630_Eng_0214
2/20/08
3:22 PM
Page 69
Settings
To add a new device, press the left soft key
[New]
1. Select the [New] key to search the device
that can be connected and which is within
range.
2. If you want to stop searching, press the right
soft key [Cancel].
3. All of the devices found are displayed in the
pop-up menu.
Select the desired device by pressing the OK
key, and entering the password.
Settings (Menu 9.3.4)
This menu allows you to configure the profile
for a Bluetooth.
] My Device Visibility
1. Selecting the Show option exposes your
phone to other Bluetooth devices.
2. Selecting Hide shows your phone only to
already paired devices.
] My Device Name: Allows you to change
the handset's name that can be seen by
other Bluetooth devices.
] Supported Services: Shows you all
services that CB630 supports.
] My Address: You can check your Bluetooth
address. You cannot change the default
setting.
] Primary Storage: You can assign the
primary storage to Handset or Memory
Card.
Date & Time
Menu 9.4
Set Date (Menu 9.4.1)
This allows you to enter the day, month and
year. You can change the date format via the
Date Format menu option.
Date Format
(Menu 9.4.2)
MM/DD/YYYY(month/day/year)
DD/MM/YYYY(day/month/year)
YYYY/MM/DD(year/month/day)
Set Time (Menu 9.4.3)
This allows you to enter the current time. You
can choose the time format via the Time
Format menu option.
Time Format (Menu 9.4.4)
12 Hours/24 Hours
69
CB630_Eng_0214
2/20/08
3:22 PM
Page 70
Settings
Auto Update (Menu 9.4.5)
] All Data Calls: Diverts to a number with a
Select On to set the phone to automatically
update the time and date according to the
current local time zone.
] All Fax Calls: Diverts to a number with a
PC connection unconditionally.
fax connection unconditionally.
Send My Number (Menu 9.5.2)
Call
Menu 9.5
Call Forwarding (Menu 9.5.1)
When this network service is activated, you
can direct your incoming calls to another
number, for example, to your voice mailbox
number. For details, contact your service
provider. Select one of the divert options, for
example, select If busy to divert voice calls
when your number is busy or when you reject
incoming calls.
The following options are available:
] All Voice Calls: Diverts voice calls
unconditionally.
] If Busy: Diverts voice calls when the phone
is in use.
] If No Answer: Diverts voice calls which you
do not answer.
] If Out of Reach: Diverts voice calls when
the phone is switched off or out of coverage.
70
This network service allows you to set your
phone number to be displayed On or hidden
Off from the person you are calling. You can
select Set by Network if you prefer to have
different settings for different service
providers.
Auto Redial (Menu 9.5.3)
Select On, your phone redials the number
you're trying to call up to 10 times after you
hear a quick, engaged signal. Press
[END]
to stop the call attempts.
This feature attempts to redial numbers that
are engaged due to the wireless network. It
does not redial numbers to an engaged party.
n Note
There will be no alert indicating the call has been
connected.
You must stay on the line to hear when the call is
connected.
CB630_Eng_0214
2/20/08
3:22 PM
Page 71
Settings
Answer Mode (Menu 9.5.4)
Call Reject (Menu 9.5.7)
This allows you to determine how to answer
the phone.
This menu allows you to enable or disable call
reject for all numbers or a specific number.
] Any Key: You can answer an incoming call
] Call Reject On/Off: This feature allows you
by pressing any key, except the
key.
[END]
] Send Key Only: You can only answer an
incoming call by pressing the
key.
[SEND]
] Slide Open: When the phone rings, you can
answer a call simply by opening the slide.
Minute Minder (Menu 9.5.5)
This option allows you to specify whether the
phone will beep every minute during an
outgoing call to keep you informed of the
length of the call.
to reject or not the incoming calls
unconditionally by disconnecting. When the
Reject All Calls option is set, all incoming
calls are routed directly to Voicemail.
] Call Reject List: Configures conditional call
reject mode. Press the left soft key [New] to
add the phone number to be rejected to the
list. When you add a number to the list, you
can add the number by entering it directly or
by searching for the number in the Contact
List.
Call Waiting (Menu 9.5.6)
The network will notify you of a new incoming
call while you have a call in progress. Select
Activate to request the network to activate
call waiting, Deactivate to request the
network to deactivate call waiting, or View
Status, to check if the function is active or
not.
71
CB630_Eng_0214
2/20/08
3:22 PM
Page 72
Settings
Menu
User
Feature
Transmission/
Receiving Mode
text message transmission,
text message reception
voice transmission,
TTY+TALK For hearing-impaired can talk
text message reception
text message transmission,
TTY+HEAR For speech-impaired audible
voice reception
voice transmission,
TTY Off For regular users
voice reception
TTY Full
For hearing- /
speech- impaired
When making communications
with a normal terminal
operator required
operator required
operator required
TTY (Menu 9.5.8)
2. TTY Talk:
Allows you to attach a TTY device enabling you
to communicate with parties also using a TTY
device.
A phone with TTY support is able to translate
typed characters to voice. Voice can also be
translated into characters and then displayed
on the TTY.
- Users who can talk but cannot hear receive a
text message and send voice messages
through TTY equipment.
TTY mode (Tele Type writer)
TTY modes are as follows :
3. TTY Hear:
- Users who can hear but cannot talk send a
text message and receive voice messages
through TTY equipment.
4. TTY Off:
1. TTY Full:
- Normal users send and receive without TTY
equipment.
- Users who cannot talk and hear send and
receive a text message through TTY
equipment.
Connecting TTY Equipment and a
Terminal
72
1. Connect a TTY cable the TTY connection on
the terminal. (the TTY connection location is
the same as a hands-free ear socket)
CB630_Eng_0214
2/20/08
3:22 PM
Page 73
Settings
2. Enter the phone menu and set up the desired
TTY mode. (For a TTY mode, see below)
3. After setting a TTY mode, check the LCD
screen of the phone for the TTY icon.
4. Connect the TTY equipment to the power
source and turn it on.
5. Make a phone connection to the desired
number.
6. When a connection is made, use the TTY
equipment to type in and send a text
message or send a voice message.
7. The voice or text message from the receiver
end appears on the TTY equipment display.
Send DTMF Tones (Menu 9.5.9)
You can send the DTMF (dual tone multifrequency) tones of the number on the display
during a call.
This option is helpful for entering a password
or account number when you call an
automated system, like a banking service.
Video Share (Menu 9.5.0)
] Initial Notification
- On: If the Video Share Call service is
available and a voice call has been made, a
pop-up window will be shown on the
screen to ask whether to make a Video
Share Call or not.
- Off: No notification window is displayed
after the phone determines whether or not
the Video Share call service is available.
] Auto Record
- On: Automatically starts recording Video
Share call images. You can view the
recorded videos on [My stuff] – [Video].
- Off: Does not automatically start recording
video share call images.
] Service
- On: This option activates the Video Share
Call service.
- Off: If this option is selected, the Video
Share Call service will be unavailable even
in a 3G service area. (If the service is Off,
you will have to set it to On and restart the
phone in order to reactivate the Video
Share Call service).
Security
Menu 9.6
Various codes and passwords are used to
protect the features and settings of your
phone. They are described in the following
sections.
73
CB630_Eng_0214
2/20/08
3:22 PM
Page 74
Settings
Auto Key Lock (Menu 9.6.1)
This menu allows to set the time of Auto
Keypad Lock.
n Note
Before setting the PIN code request feature to
Off, you must enter your PIN
The following [Options] are available:
n Note
You cannot make emergency calls under the key
lock.
Lock Handset (Menu 9.6.2)
] On: You must enter the PIN each time the
phone is switched on.
] Off: The phone connects directly to the
network when you switch it on.
You can use a security code to avoid
unauthorized use of the phone.
Fixed Dial Number (Menu 9.6.4)
If you set phone lock to When Power On, the
phone will request a security code whenever
you switch the phone on. If you set the phone
lock to When SmartChip Changed, your phone
will request a security code only when you
change your SmartChip. If you set the phone
lock to Immediately, your phone will lock
immediately.
] FDN On/Off
PIN Code Request (Menu 9.6.3)
When the PIN code request feature is set to
‘On’, you must enter your PIN each time you
switch the phone on. Consequently, any person
who does not have your PIN cannot use your
phone without your approval.
74
This allows you to restrict your outgoing calls
to selected phone numbers, if this function is
supported by your SmartChip. The PIN2 code is
required.
- On: You can only call phone numbers
stored in the Address Book. You must enter
your PIN2.
- Off: You can call any number.
] FDN List
n Note
Not all SmartChips have a PIN2. If your
SmartChip does not, this menu option is not
displayed.
CB630_Eng_0214
2/20/08
3:22 PM
Page 75
Settings
Change Codes (Menu 9.6.5)
Flight Mode
The Change codes feature allows you to
change your current password to a new one.
You must enter the current password before
you can specify a new one.
This allows you to use only the phone’s
features that do not require the use of the
wireless network when you are in an airplane
or in places where the wireless network is
prevented.
You can change the access codes for: Security
Code, PIN1, PIN2
n Note
PIN: Personal Identification Number.
Connection
Menu 9.8
If you set the flight mode on, the
icon will
be displayed on the screen instead of the
network signal icon.
] On: You cannot make (or receive) any calls,
Menu 9.7
Network Profiles (Menu 9.7.1)
This menu shows the Network Profile. You can
add, delete and edit Network Profiles by using
the Options Menu. However, you cannot delete
or edit default configurations provided by AT&T.
USB Connection Mode (Menu 9.7.2)
You can transfer files from a compatible PC to
the memory in your phone using the Mass
Storage. When you connect the phone to a PC
using the USB cable, this will be displayed as a
removable disk through Windows Explorer.
including emergency calls, or use other
features that require network coverage.
] Off: You can deactivate the flight mode and
restart your handset to access the network.
Software Update
Menu 9.9
This menu is used to resume a postponed
software update. If new software exists, the
AT&T server notifies devices using a WAP push
message. Before updating new software after
downloading it from the AT&T server, you can
decide whether you would like to postpone the
operation. Reminder times can be set to 30
minutes, 1 hour, and 4 hours. When the time is
up, you will be prompted again or you can
resume the postponed operation using this
menu at any time.
75
CB630_Eng_0214
2/20/08
3:22 PM
Page 76
Settings
Check Memory
Menu 9.0
Common (Menu 9.0.1)
This function shows the status of the user
memory of the handset.
Reserved (Menu 9.0.2)
This function shows the status of the reserved
memory for the user (Text Message, Contact
List, Calendar, Tasks, Memo).
Reset Settings
Menu 9.#
This function allows you to restore factory
settings. To do this, you need the security code.
Master Reset (Menu 9.#.1)
Restores the settings (e.g.: Audio, Display,
Language, Date & Time, Bluetooth Settings)
stored in the handset memory to default
values.
Master Clear (Menu 9.#.2)
SmartChip (Menu 9.0.3)
This function shows the status of the
SmartChip card user memory.
Deletes downloaded/user created contents
(e.g.: images, videos) from Handset content
and the External Memory card.
Memory Card (Menu 9.0.4)
] Handset
If your phone has a multimedia memory card in
the card slot, you can save images, sounds,
and videos on the memory card. You can check
the current status of the external memory card
in the Memory status menu.
Handset Information
Menu 9.*
This menu is used to view My Numbers,
Manufacturer and Model Name information
etc.
- Deletes all downloaded/user created
Images, Videos & Sounds from the Handset
Memory.
- Restores Personal Information stored in the
handset memory (e.g.: address book,
messages, tasks, alarm, Calendar
schedules) to default values.
- Resetores the settings stored in the
handset memory to default values.
] Memory Card: Deletes all contents from
the External Memory Card.
76
CB630_Eng_0214
2/20/08
3:22 PM
Page 77
Q&A
Please check to see if any problems you have encountered with the phone are described in this
section before taking the phone in for a service or calling a service engineer.
Q How do I view the list of outgoing calls,
incoming calls and missed calls?
A Press the
[SEND] key.
Q How do I view all numbers stored in the
memory?
A Press the down navigation key.
Q Why is the connection inconsistent or not
audible in certain areas?
A When the frequency environment is unstable
in a certain area, connection may be
inconsistent and not audible. Relocate to
another area and try again.
Q Why is the connection not consistent or
abruptly disconnects even when
established?
A When frequency is unstable or weak or if
there are too many users, connection may be
cut off even after it was established. Please
try again later or attempt after relocating to
other areas.
Q Why does the LCD not turn on?
A Remove the battery and turn on the power
after placing it back in. If there is no change,
fully charge the battery and try again.
Q Why is there an echo when a connection is
made with certain telephones in a certain
area?
A This is called the ‘Echo Phenomenon’, which
occurs if the connection volume is too high
or caused by special properties (semielectronic telephone exchange) of the
equipment on the other end.
Q Why does the phone heat up?
A The phone may get hot when there is a very
long call duration or when games are played
or even when surfing the Internet for a long
time. This has no effect upon the life of the
product or performance.
77
CB630_Eng_0214
2/20/08
3:22 PM
Q&A
Q Why does the battery life get shorter in
standby mode?
A The battery is worn out. As time passes, the
battery life gradually becomes shorter. If the
battery lasts about half the amount of time
as when first purchased, it’s time to
purchase a new battery.
Q Why does the battery run out so quickly
during normal use?
A It is due to the user environment or a large
number of calls or a weak signal.
Q Why is no number dialed when you recall an
Address Book entry?
A Check that the number has been stored
correctly by using the Address book Search
feature. Re-store them, if necessary.
78
Page 78
CB630_Eng_0214
2/20/08
3:22 PM
Page 79
Accessories
There are a variety of accessories available for your mobile phone. You can select these options
according to your personal communication requirements. Consult your local dealer for availability.
Travel Adapter
This adapter allows you to charge the battery. It supports
standard U.S. 120 Volt 60Hz outlets.
It takes under 4 hours to charge a completely discharged battery.
Battery
Standard battery is available.
Vehicle Power Adapter
You can operate the phone and trickle charge the phone battery
from your vehicle by using the vehicle power adapter.
It takes 5 hours to charge a completely discharged battery.
79
CB630_Eng_0214
2/20/08
3:22 PM
Page 80
Accessories
Stereo headset
Allows hands-free operation. Includes earpiece and microphone.
Data Cable Kit
* When installing, make sure to connect to the PC after your
phone and the cable have been connected. Otherwise, your PC
may have a problem.
n Note
• Always use genuine LG accessories. Failure to do this may
invalidate your warranty.
• Accessories may be different in different regions; please check
with our regional service company or agent for further enquiries.
80

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Print high-res
XMP Toolkit                     : 3.1-701
About                           : uuid:4bd6fc27-44a2-4491-b421-62e2297f09ff
Producer                        : Acrobat Distiller 7.0 for Macintosh
Modify Date                     : 2008:04:07 17:23:58-04:00
Creator Tool                    : QuarkXPress: pictwpstops filter 1.0
Create Date                     : 2008:02:20 15:23:06+09:00
Metadata Date                   : 2008:04:07 17:23:58-04:00
Document ID                     : uuid:66fb2c16-df7c-11dc-b8ad-0011247595b0
Instance ID                     : uuid:db058c20-c961-4484-84cd-ce6e08827176
Format                          : application/pdf
Creator                         : YOO
Title                           : CB630_Eng_0214
Has XFA                         : No
Page Count                      : 78
Author                          : YOO

EXIF Metadata provided by EXIF.tools