LG Electronics USA CD721 Cellular/PCS WCDMA/HSPA USB Dongle User Manual

LG Electronics MobileComm USA, Inc. Cellular/PCS WCDMA/HSPA USB Dongle Users Manual

Users Manual

ENGLISHUser GuideCD721MFL (1.0) H www.lg.com
CD721 User GuideENGLISH
2Getting Started ..........................................3System Requirement .................................6LED Feature ...............................................7Installing 4G LTE Connection Manager for Windows OS .........................................8Removing 4G LTE Connection Manager......9Introducing and Getting Started with 4G LTE Connection Manager ....................104G LTE Connection Manager Features – Launcher .................................................114G LTE Connection Manager Features – InternetAccess ........................................154G LTE Connection Manager APN Setting .....................................................16Safety Guidelines .....................................19Included items in box ...............................25Contents
3Insert the SIM CardNOTE: Do not insert or remove the SIM card during the connect with device. The web service can not be received properly.1 Open the cover by pushing it.2 Insert the SIM card into SIM slot in the direction indicated on the slot. Make sure to push the SIM card completely into slot until it’s fully inserted.3 Close the cover and push up until it clicks into place.1 2 3Getting Started
4Getting StartedInsert the microSD CardInsert the microSD card into the address in the slot. Press the microSD card into the slot until it clicks.NOTE: Do not insert or remove the microSD card during the read/write, doing so may damage the data.
5Use the USB CableUSB Port1 Connect the USB Cable into an available USB Port.2 Connect the USB Cable into the USB modem.NOTE: USB Cable accessory included for convenience and optimal performance.
6System Requirement1. Hardware•CPU: Pentium III or higher•Memory: 512MB or more•Graphic Adaptor: 800X600 or higher •Hard disk: 100MB or more in free disk space2. Software•Windows OS: XP (Service Pack3)Vista (Service Pack2) 7 (32/64bit)
7LED Indicator DescriptionLEDUSB JackUSB CoverFast Blinking Powering UpSlow Blinking Acquiring 3G Network ConnectionSolid Connection to 3G NetworkSlow Blinking Acquiring LTE Network ConnectionSolid Connected to LTE NetworkSolid Not connected to NetworkLED Feature
81 Connect USB modem to PC, then the 4G LTE Connection Manager installer is run and display the Setup screen.2 In the Setup screen, click “Next” to proceed with the next step.3 Agree the terms of the “License Agreement” and click “Next”.4 After 4G LTE Connection Manager setup is finished, click “Finish”.5 4G LTE Connection Manager is run automatically.6 Wait until Launcher displays operator’s name on it. It may take about 1 minute.Installing 4G LTE Connection Manager for Windows OS
9Windows OSClick Start > All Programs > 4G LTE Connection Manager > 4G LTE Connection Manager for Krypton > Uninstall 4G LTE Connection ManagerRemoving 4G LTE Connection Manager
104G LTE Connection Manager is easy-to-use software that enables you to access the internet without separate wiring. •4G LTE Connection Manager is launched automatically if the USB modem is properly connected to PC. You can also run it by double-clicking icon on the desktop.•APN is set automatically according to your subscribed operator and you can see operator’s name on Launcher.•If operator’s name is not displayed properly, go to section “4G LTE Connection Manager APN Setting” in the below.Introducing and Getting Started with 4G LTE Connection Manager
11Top AreaNetwork Indicator AreaConnection Button AreaMain Category Button AreaTop Area•About button– You can check Firmware version, Model name, User information.•Help file open•Minimize the program window– displays in the taskbar•Exit the program4G LTE Connection Manager Features – Launcher
12Network Indicator AreaText output of status information included.•The current network status (RS)Network Indicator Icon DescriptionLTE Currently connected to the LTE network.HSPA+ Currently connected to the HSPA+ network.•Sensitivity – 6 levels in the antenna shape.•Displays the information on the network service provider.•Connection status of packet data call– Indicates if the program is connected to the Internet.•Roaming status – Indicates it is in roaming service.4G LTE Connection Manager Features – Launcher
13•Connection time – Displays the time point it is connected to the Internet.•Connects to the Internet and displays the packet size/Internet speed.Connection Button Area•Connect/Disconnect button provided.Main Category Button AreaButton Description[UNE Logo] Move to the UNE's home page.[LG Logo] Move to the provider’s logo and directed page.[Settings] Button for configuring the settings of 4G LTE Connection Manager.
144G LTE Connection Manager Features – LauncherSettings•Data usage – View entire, one month or last data usage information.•Profile setting – Set the mode or other function.•Network setting – Set the network Automatic, For 3G only or For LTE only.•SIM setting – Set the PIN setting and PIN change.•General setting – Set the Language or Skin.
154G LTE Connection Manager Features – InternetAccess1 Click “Connect” button on the Launcher to connect to the internet. When the connection is established successfully, it is ready to use internet service.2 The following table informs you of the modem status and actions for a possible network problem.Indicator DescriptionA modem is not connected.•Currentlyhostdriverisbeingloaded. Wait for a while. It may take about 1minute after first installation.•Currentlymodemisnotconnectedto you PC. Check if a modem is connected to your PC properly.Checking Network status •CurrentlycheckingNetworkstatus.Normally, it takes less than 1 minute.
16APN is set automatically according to inserted SIM card. You don’t need to set APN manually. If APN is not set automatically, you can set APN manually.1 Select “Settings” button on the Main Category Button Area.2 Select “Profile setting.”3 Select “Manual.”4 Select “New.”4G LTE Connection Manager APN Setting
175 Type “Profile name”, “APN”, “User name”, “Password”, “Protocoltype” and save.•APN information must be provided by operator.•Profile name can be determined by user.6 Saved profile is shown in “Profile name” field. If there are multiple profiles, you can select one among them.
187 Click “Apply” to apply selected profile.4G LTE Connection Manager APN Setting
19Safety GuidelinesBody-worn OperationThis Mobile Broadband USB Modem, model CD721, is approved for use in normal size laptop computers only (typically with 12” or larger display screens).To comply with FCC RF exposure requirements, this modem should not be used in configurations that cannot maintain at least 0.5cm (approximately 0.2inches) from your body.Also, when using the USB extension cable, place the USB modem away from your body or any other transmitter of the laptop or PC.This USB modem has been tested for compliance with FCC/IC RF exposure limits in the laptop computers configurations with horizontal and vertical USB slots and can be used in laptop computers with substantially similar physical dimensions, construction and electrical and RF characteristics.When using this USB modem in your computer, it must not be co-located or simultaneously transmit with any other
20radio (forexample, Bluetooth or WiFi radios) in the computer.Part 15.21 statementChange or modifications that are not expressly approved by the manufacturer could void the user’s authority to operate the equipment.FCC Part 15 Class B ComplianceThis device and its accessories comply with part15 of FCC rules.Operation is subject to the following two conditions:(1) This device and its accessories may not cause harmful interference.(2) This device and its accessories must accept any interference received, including interference that causes undesired operation.Part 15.105 statementThis equipment has been tested and found to comply with the limits for a class Safety Guidelines
21B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If you experience interference with reception (e.g., television), determine if this equipment is causing the harmful interference by turning the equipment off and then back on to see if the interference is affected. If necessary, try correcting the interference by one or more of the following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.
22- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.- Consult the dealer or an experienced radio/TV technician for help.Consumer Information on SAR (Specific Absorption Rate)This device meets the government's requirements for exposure to radio waves. Your wireless device is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to Radio Frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health.Safety Guidelines
23The exposure standard for wireless devices employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. Tests for SAR are conducted using standard operating positions specified by the FCC with the device transmitting at its highest certified power level in all tested frequency bands. Although SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value. Because the device is designed to operate at multiple power levels to use only the power required to reach the network, in general, the closer you are to a wireless base station antenna, the lower the power output. Before a device is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the government-adopted requirement for safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the body) as required by the FCC for each model.
24Safety GuidelinesThe FCC has granted an Equipment Authorization for this device with all reported SAR levels evaluated as in compliance with the FCC RF emission guidelines. SAR information on this device is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/fccid after searching on FCC ID ZNFCD721. Additional information on Specific Absorption Rates (SAR) can be found on the Cellular Telecommunications Industry Association (CTIA) website at http://www.ctia.org/.
25These accessories are available for use with the CD721.USB Modem USB Extension Cable User guideNOTE: •AlwaysusegenuineLGaccessories.•Failuretodothismayvoidyourwarranty.•Accessoriesmayvaryindifferentregions.Included items in box

Navigation menu