LG Electronics USA CT810 Cellular/PCS WCDMA/GSM/EDGE Phone with WLAN and Bluetooth User Manual

LG Electronics USA Cellular/PCS WCDMA/GSM/EDGE Phone with WLAN and Bluetooth Users Manual

Users Manual

Disposal of your old appliance1.  When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC.2.  All electrical and electronic products should be disposed of separately from the municipal waste  stream  via  designated  collection  facilities appointed by the government or the local authorities.3.  The correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health.4.  For more detailed information about disposal of your old appliance, please contact your city  office,  waste  disposal  service  or the shop where you  purchased  the product.CT810 User Guide - EnglishThis document is the user guide for the LG CT810  Windows Mobile Pocket PC.  All rights for this document are reserved by LG Electronics. Copying, modifying and distributing this document without the consent of LG Electronics are prohibited.
Part 15.21 statement " Change or Modifications that are not expressly approved by the manufacturer could void     the user's authority to operate the equipment. "   Part 15.105 statement This equipment has been tested and found to comply with the limits for a class B digital device,pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and usedin accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. if this equipment does cause harmful interference or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.- Connect the equipment into an outlet on a circuit different from that to   which the receiver is connected- Consult the dealer or an experienced radio/TV technician for help.
LIMITED WARRANTY STATEMENT  1. WHAT THIS WARRANTY COVERS: LG offers you a limited warranty that the enclosed subscriber unit and its enclosed accessories will be free from defects in material and workmanship, according to the following terms and conditions: (1) The limited warranty for the product extends for ONE (1) year beginning on the data of purchase of the product. (2) The limited warranty extends on to the original purchaser of the product and is not assignable or transferable to any subsequent purchaser/end user. (3) This warranty is good only to the original purchaser of the product during the warranty period as long as it is in the U.S., including Alaska, Hawaii, U.S. Territories and Canada. (4) The external housing and cosmetic parts shall not be covered under these limited warranty terms. (5) Upon request from LG, the consumer must provide information to reasonably prove the date of purchase. (6) The customer shall bear the cost of shipping the product to the Customer Service Department of LG. LG shall bear the cost of shipping the product back to the consumer after the completion of service under this limited warranty.  2. WHAT THIS WARRANTY DOES NOT COVER: (1) Defects or damages resulting from use of the product in other than its normal and customary manner. (2) Defects or damages from abnormal use, abnormal conditions, improper storage, exposure to moisture or dampness, unauthorized modifications, unauthorized connections, unauthorized repair, misuse, neglect, abuse, accident, alteration, improper installation, or other acts which are not the fault of LG, including damage caused by shipping blown fuses spills of food or liquid. (3) Breakage or damage to antennas unless caused directly by defects in material or workmanship. (4) That the Customer Service Department at LG was net notified by consumer of the alleged defect or malfunction of the product during the applicable limited warranty period. (5) Products which have had the serial number removed or made illegible. (6) The limited warranty is in lieu of all other warranties, express or implied either in fact or by operations law, statutory or otherwise, including, but limited to any implied warranty of marketability or fitness for a particular use. (7) Damage resulting from use of non-LG approved accessories. (8) All plastic surfaces and all other externally exposed parts that are scratched or damaged due to normal customer use. (9) Products operated outside published maximum ratings. 3 (10) Products used or obtained in a rental program. (11) Consumables (such as fuses).  3. STATE LAW RIGHTS: No other express warranty is applicable to this product. THE DURATION OF ANY IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTY OF MARKETABILITY, IS LIMITED TO THE DURATION OF THE EXPRESS WARRANTY HEREIN. LG INFOCOMM INC. SHALL NOT BE LIABLE FOR THE LOSS OF THE USE OF THE PRODUCT, INCONVENIENCE, LOSS OR ANY OTHER DAMAGES, DIRECT OR CONSEQUENTIAL, RISING OUT OF THE USE OF, OR INABILITY TO USE, THIS PRODUCT OR FOR ANY BREACH OF ANY EXPRESS OR IMPLIED WARRANTY, INCLUDING THE IMPLIED WARRANTY OF MARKETABILITY APPLICABLE TO THIS PRODUCT. Some states do not allow the exclusive of imitation of incidental or consequential damages or limitations on how long an implied warranty lasts; so these limitations or exclusions may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state. 4. HOW TO GET WARRANTY SERVICE: To obtain warranty service, please call the following web address: www.lgeservice.com
8For Your SafetyImportant InformationThis user guide contains important information on the use andoperation of this phone. Please read all the informationcarefully for optimal performance and to prevent any damageto or misuse of the phone. Any changes or modifications notexpressly approved in this user guide could void your warrantyfor this equipment.Before You StartSafety InstructionsWARNING! To reduce the possibility of electric shock, do notexpose your phone to high humidity areas, such as thebathroom, swimming pool, etc.Always store your phone away from heat. Never store yourphone in settings that may expose it to temperatures less than32°F or greater than 104°F, such as outside during extremeweather conditions or in your car on a hot day. Exposure toexcessive cold or heat will result in malfunction, damageand/or catastrophic failure.Be careful when using your phone near other electronicdevices. RF emissions from your mobile phone may affectnearby in adequately shielded electronic equipment. Youshould consult with manufacturers of any personal medicaldevices such as pacemakers and hearing aides to determine ifthey are susceptible to interference from your mobile phone.Turn off your phone in a medical facility or at a gas station.Never place your phone in a microwave oven as this willcause the battery to explode.IMPORTANT! Please read the TIA SAFETY INFORMATION onpage 78 before using your phone.Safety InformationRead these simple guidelines. Breaking the rules may bedangerous or illegal. Further detailed information is given in thisuser guide.]Never use an unapproved battery since this could damagethe phone and/or battery and could cause the battery toexplode.]Never place your phone in a microwave oven as it willcause the battery to explode.]Do not dispose of your battery by fire or with hazardous orflammable materials.]Make sure that no sharp-edged items come into contactwith the battery. There is a risk of this causing a fire.]Store the battery in a place out of reach of children.]Be careful that children do not swallow any parts such asrubber plugs (earphone, connection parts of the phone,etc.). This could cause asphyxiation or suffocation.
9For Your Safety]Unplug the power cord and charger during lightning stormsto avoid electric shock or fire.]When riding in a car, do not leave your phone or set up thehands-free kit near to the air bag. If wireless equipment isimproperly installed and the air bag is activated, you may beseriously injured.]Do not use a hand-held phone while driving.]Do not use the phone in areas where its use is prohibited.(For example: aircraft).]Do not expose the battery charger or adapter to directsunlight or use it in places with high humidity, such as abathroom.]Never store your phone in temperatures less than- 4°F orgreater than 122°F.]Do not use harsh chemicals (such as alcohol, benzene,thinners, etc.) or detergents to clean your phone. There is arisk of this causing a fire.]Do not drop, strike, or shake your phone severely. Suchactions may harm the internal circuit boards of the phone.]Do not use your phone in high explosive areas as the phonemay generate sparks.]Do not damage the power cord by bending, twisting, pulling,or heating. Do not use the plug if it is loose as it may causea fire or electric shock.]Do not place any heavy items on the power cord. Do notallow the power cord to be crimped as it may cause fire orelectric shock.]Do not handle the phone with wet hands while it is beingcharged. It may cause an electric shock or seriouslydamage your phone.]Do not disassemble the phone.]Do not place or answer calls while charging the phone as itmay short-circuit the phone and/or cause electric shock orfire.]Only use the batteries, antennas, and chargers provided byLG. The warranty will not be applied to products provided byother suppliers.]Only authorized personnel should service the phone and itsaccessories. Faulty installation or service may result inaccidents and consequently invalidate the warranty.]Do not hold or let the antenna come in contact with yourbody during a call.]An emergency call can be made only within a service area.For an emergency call, make sure that you are within aservice area and that the phone is turned on.
10For Your SafetyFCC RF Exposure InformationWARNING! Read this information before operating the phone.In August 1996, the Federal Communications (FCC) of he UnitedStates, with its action in Report and Order FCC 96-326, adoptedan updated safety standard for human exposure to radiofrequency (RF) electromagnetic energy emitted by FCCregulated transmitters. Those guidelines are consistent withthe safety standard previously set by both U.S. andinternational standards bodies.The design of this phone complies with the FCC guidelines andthese international standards.CAUTIONUse only the supplied and approved antenna. Use ofunauthorized antennas or modifications could impair callquality, damage the phone, void your warranty and/or result inviolation of FCC regulations. Do not use the phone with adamaged antenna. If a damaged antenna comes into contactwith skin, a minor burn may result. Contact your local dealerfor a replacement antenna.Body-worn OperationThis device was tested for typical body-worn operations withthe back of the phone kept 0.79 inches (2cm) between theuser’s body and the back of the phone. To comply with FCC RFexposure requirements, a minimum separation distance of 0.79inches(2cm) must be maintained between the user's bodyand the back of the phone. Third-party belt-clips, holsters, andsimilar accessories containing metallic components should notbe used. Body-worn accessories that cannot maintain 0.79inches(2cm) separation distance between the user's bodyand the back of the phone, and have not been tested for typicalbody-worn operations may not comply with FCC RF exposurelimits and should be avoided.
11For Your SafetyVehicle Mounted External Antenna(optional, if available)A minimum separation distance of 8 inches (20cm) must bemaintained between the user/bystander and the vehiclemounted external antenna to satisfy FCC RF exposurerequirements. For more information about RF exposure, visitthe FCC website at www.fcc.govFCC Part 15 Class B ComplianceThis device and its accessories comply with part 15 of FCCrules. Operation is subject to the following two conditions: (1) This device and its accessories may not cause harmfulinterference, and (2) this device and its accessories mustaccept any interference received, including interference thatmay cause undesired operation.Cautions for Battery]Do not disassemble.]Do not short-circuit.]Do not expose to high temperature: 60°C (140°F).]]Do not incinerate.Battery Disposal]Please dispose of your battery properly or bring to yourlocal wireless carrier for recycling.]Do not dispose in fire or with hazardous or flammablematerials.Adapter (Charger) Cautions]Using the wrong battery charger could damage your phoneand void your warranty.]The adapter or battery charger is intended for indoor useonly.Do not expose the adapter or battery charger to direct sunlightor use it in places with high humidity, such as the bathroom.
GETTING STARTEDInstalling the USIM card and battery1. Installing the USIM card.Your USIM card contains your phone number, service details and contacts and must be inserted into your handset. If your USIM card is removed then your handset becomes unusable (except for emergency calls depending on which Country you are in at the time) until a valid one is inserted. Always disconnect the charger and other accessories from your handset before inserting and removing your USIM card. Slide the USIM card into the USIM card holder. Make sure that the USIM card is properly inserted and the gold contact area on the card is facing downwards. To remove the USIM card, press down lightly and pull it in the reverse direction.GETTING STARTED
Notev  The metal contact of the USIM card can easily be damaged by scratches. Pay special attention to the USIM card while handling. Follow the instructions supplied with the USIM card.2. Installing the battery.Insert the Battery into the battery compartment as the metal contacts meet in the middle of the phone. Push down the top of the battery until it snaps into place. Place the battery cover to the phone as shown. GETTING STARTED
3. To remove the battery.Turn the phone up-side down, as shown, gently push down the battery cover to release and lift off. Then lift up the battery with your fingers and pull-out the battery.Charging the batteryBefore connecting the charger to the phone you must first check the battery is installed.GETTING STARTEDGETTING STARTED
<Charging mode>1.   When you recharge your phone after device switch off, the phone’s LED lights up red and displays a charging animation.   2.  When the phone is fully charged, the LED lights up green and the animation stops.   3.  If you press and hold the power button for approx. 2 seconds in charging mode, the phone is turned on.   4.  If you disconnect the travel adapter from the phone in charging mode, the phone is turned off.  CAUTION!•  When you charge a fully discharged battery, it may take over a minute for the display to respond. This is not a malfunction but completely normal.    (If using a USB cable, it may take over 10 minutes.)•  Do not force the connector as this may damage the phone and/or the charger.•  If you use the charger out of your own country, use an attachment plug adaptor for the proper configuration.•  Do not remove your battery or the SIM card while charging.•  There is risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the maker's instructions.GETTING STARTED
WARNNING•  Unplug the charger from the mains and phone during lightning storms to avoid electric shock or fire.•  Make sure that no sharp-edged items such as animal teeth or nails come into contact with the battery. There is a risk of this causing a fire.Disconnecting  the chargerDisconnect the travel adapter from the phone as shown in the diagram. Make sure you pull by the plug, not the cord.GETTING STARTEDGETTING STARTED
How to use a  microSD memory card<MicroSD memory card><How to insert a microSD memory card>1.  Lift the plastic cover which protects the microSD slot.2.  Insert the memory card into the slot with the metal contacts facing down. Do not force the memory card into the slot, if the card does not slide in easily, please check that the card is being inserted the correct way or if there is a foreign object in the slot.GETTING STARTED
3.  Once inserted, push the memory card until you hear a Click, meaning that the microSD has been correctly engaged.4. Close the plastic slot protection.5.  Do not remove the memory card when reading/writing the memory card.Attention:v  Avoid using the Flash Memory Card when the battery is low.v  When writing to the card, wait for the operation to complete before removing the card.v  The card is designed to fit easily into the system one way only.v  Do not bend the card or force it into the slot.v  Do not insert any memory cards other than microSD.Support up to 2GB microSD.  For more information on the microSD, please refer to the memory card instruction manual.GETTING STARTEDGETTING STARTED
Memory card  formattingBefore you start to use the memory card you have to format it. After you insert the memory card, the message for format pop up and you can format easily.Notev  MicroSD has been already formatted usually.Turn the device on and offTo turn on the device, press the POWER button. When you turn on the device for the first time, you are asked to complete a calibration process. For more information, see “Calibrate the device” on next page.To turn off the device, press P again.Notev  Pressing P turns off your device temporarily and switches the device to sleep mode. However, you can still receive messages and calls while your device is in the sleep mode.GETTING STARTED
GETTING STARTEDGETTING STARTEDReset the deviceOccasionally you may need to reset your device. A normal (or soft) reset of your device clears all active program memory and shuts down all active programs. This can be useful when the device is running slower than normal, or a program is not performing properly. A soft reset is also necessary after the installation of some programs. If a soft reset is performed when programs are running, unsaved work will be lost.You can also perform a hard reset (also known as a full reset). A hard reset should be performed only if a normal reset does not solve a system problem. After a hard reset, the device is restored to its default settings—the way it was when you first purchased it and turned it on.  Any programs you installed, data you entered, and settings you customized on the device will be lost. To perform a soft reset•  Re-attach the battery and press the POWER button on the right side of your device.  The device restarts and displays the Today screen.
GETTING STARTEDTo perform a hard reset•  Press and hold both buttons(Send+Volume Down) shown enclosed by circles in the picture below. Keep these keys pressed, and at the same time, press the POWER button on the right side of your device. And hold both buttons for a while (about 10 seconds).Calibrate the  deviceCalibrating the device screen involves tapping with the stylus the center of a cross as it moves around the screen. This process ensures that when you tap the screen with your stylus, the tapped item is activated.If your device does not accurately respond to screen taps, follow these steps to re-calibrate it:1.  Tap Start > Settings > System tab > Screen.2.  On the General tab, tap Align Screen, and follow the instructions on the screen.
Notev  You can execute directly the screen alignment with the Navigation Key pressed and then the Internet Explorer Key pressed in turn.Manage screen  settingsThe device touch screen has three orientation modes: Portrait, Landscape (right-handed), and Landscape (left-handed). Portrait mode allows you to get a better view or a better operation of certain programs on your device, while Landscape mode may be optimal for viewing longer text files.v  To change the orientation, tap Start > Settings > System tab > Screen>General tab, and select the orientation you want.GETTING STARTEDGETTING STARTED
v  To smooth the edges of screen fonts for many programs, on the ClearType tab(tap Start>Settings>System tab>Screen), select the Enable ClearType check box.v  To increase the readability or to see more content on the screen, on the Text Size tab(tap Start>Settings>System tab>Screen), adjust the text size by moving the slider.GETTING STARTEDGETTING STARTED
Icon DescriptionUsed to enter menu directly.Used to make a call Used to send the text/ multimedia message and to view the messages in the inbox. You can activate various functions related to messages.Used to access Internet.The Today ScreenCustomising the Today screen The Today screen displays important information, such as upcoming appointments and status indicators. You can tap a section on the screen to open the associated program.v  To access the Today screen, tap Start >Settings>Personal tab>Today>Items tab.SCREEN INFORMATIONREEN INFORMATION
You can select the item you want to appear on the Today screen. To change its position, tap Move up or Move Down. If you want to customise the further task and appointment information by tapping Options(refer to (30) page).Tap the Today timeout select the number of hours from the drop down list. If you don't use your phone after the specified length of time has elapsed, the screen switches to the Today screen. v  To synchronise the Today screen display, including the background image, tap Start > Settings > Personal tab >Today >Appearance tab.You can select the desired theme for the background. If you use your own background image, tap the Use this picture as the background and tap Browse to locate the file you want.Default MS Today ScreenOn the Today screen, you can see important and recent information for the day.1.  Start button: Shows the Start menu that you can use directly.2.  Date and time:  Shows today's date and current time. Tap to open the Clock & Alarm screen. SCREEN INFORMATIONSCREEN INFORMATION
3.  Phone information: Wireless Manager / Bluetooth phone on or off.4.  Unread message: You can see the unread message from Inbox account.5.  Upcoming task: You can see the number of active task. Tap to see the present status of all the tasks.6.  Upcoming schedule: You can see the upcoming schedule.7.  No new missed calls:  You can see the missed call history.8.  Device lock: You can lock the device. To unlock tab the left down side. 9.  Indicators: Connectivity, SIM card, Volume and Battery indicator.10. Link to Calendar11. Link for Contacts listIndicatorsFollowing are some of the status icons that you may see on your device.Icon DescriptionBluetooth Hands-Free connectin establishedBluetooth Hands-Free channel openedBluetooth High Quality Audio channel openedIndicates the remained battery power .Indicates the battery is very low.Battery charging. Sound on. Sound off. Ringer in vibration mode. Connection is active. Connection is not active.SCREEN INFORMATION
Icon Description Synchronization in progress. Synchronization error. Indicates maximum signal strength. No signal. Phone is turned off.Help file is available if you go start->Help in bluetooth settings window. You can use the Help to see the details of Bluetooth profilesIcon Description No phone service. Searching for phone service. Voice call in progress. Calls are forwarded. Call on hold. Missed call.GPRS (General Packet Radio Services) availableEDGE (Enhanced Data Rates For Global Evolution) availableWCDMA  or HSDPA availableHSDPA (High Speed Downlink Packet Access) available New e-mail or text messages. New voice mail There are more notifications. Tap the icon to view all. Indicates the device is locked. Device unlocked.SCREEN INFORMATIONSCREEN INFORMATION
Using the Start MenuThe Start menu, located at the top left corner of the Today screen, displays a list of programs. It lets you close a screen and switch from one program to another. You can start a program by scrolling through the programs list and tap a program with the stylus.Editing Today screen1. Tap to open the Today screen.2.  Tap to start a program. The items displayed in Start menu can be synchronised by tapping Start > Settings > Personal tab > Menus.3. Tap to start a recently-used program.4.  Tap to view and select more programs that are installed in your device.5.  Tap to change device settings.6.  Tap to see a Help topic for the current screen.Program IndicatorsFollowing are some of the icons for the programs that are already installed on your device.SCREEN INFORMATION
Icon DescriptionActiveSync Synchronises information between your device and a PC.Calculator Performs basic arithmetic and calculations, such as addition, subtraction, multiplication, and division.Calendar Keeps track of your appointments and creates meeting requests.Camera Snaps photos or shoots video clips with accompanying audio.Wireless Manager Allows you to manage the device's connection(including Wi-fi, Blutooth, and Phone).Contacts Keeps track of your friends and colleagues.Icon DescriptionExcel Mobile Creates new workbooks or lets you view and edit Excel workbooks.File Explorer Enables you to organize and manage files on your device.Games Lets you play two  pre-installed games: Bubble Breaker and Solitaire.Help Enables you to see Help topics for a program on your device.Internet Explorer Internet Explorer browses Web and WAP sites, and downloads new programs and files from the Internet.Mobile Java Enables you to download and install Java applications, such as games and tools, on your device.Messaging Sends and receives e-mail and text messages.SCREEN INFORMATIONSCREEN INFORMATION
Icon DescriptionNotes Creates handwritten or typed notes, drawings, and recordings.Phone Makes and receives calls, switches between calls and sets up conference calling.Pictures & Videos Collects, organizes, and sorts picture and video files in the My Pictures folder of your device or on a storage card.Messenger Sends and receives instant messages with your Windows Live Messenger contacts.PowerPoint Mobile Lets you view Powerpoint slides and presentation.Search Enables you to search contacts, data, and other information on your device.Icon DescriptionTasks Keeps track of your tasks.Windows Media Enables the multimedia function on your device.Word Mobile Creates new documents or lets you view and edit Word documentsInternet Sharing Allows you to use your device as a internet sharing device.FM Radio Enables you to hear FM Radio.PSNote Enables a multimedia to user input editor handwriting recognition.Autoprofile  Enables to configure the network profile for Internet, MMS, Java, Email automatically.SCREEN INFORMATION
You are available to the various input methods on the screen, including Block Recognizer, Keyboard, Letter Recognizer, and Transcriber. The Input Panel icon appears on the menu bar to indicate which input method is currently selected. The Input Selector arrow (shown at the right side of the Input Panel icon) opens a list of available input methods. To change the input method, tap the Input Selector arrow.IconIndicates the selected input method is The on-screen keyboard. Letter Recognizer or Block Recognizer. Transcriber. Using the KeyboardTo enter text, symbols, and numbers, you can either type using the QWERTY Keyboard or the standard on-screen Keyboard. ENTERING AND SEARCHING  INFORMATIONENTERING AND SEARCHING INFORMATION
Using the standard on-screen Keyboard The on-screen Keyboard is available when text entry is possible. You can enter text by tapping keys on the keyboard that are displayed on the screen.Enter text using the on-screen keyboardv  The on-screen keyboard is available when text entry is possible.v  To make the keys larger, tap the Input Selector arrow, and then Options. In the Input method list, select Keyboard, and then tap Large Keys. v  General rule for entering text is same as MS based PC.Using Letter RecognizerWith Letter Recognizer, you can write individual letters, numbers, and punctuation, which are then converted into typed text.Enter text using Letter Recognizerv  Letter Recognizer is available when text entry is possible. v  Preferred word list will be disappeared if there is no user reaction for 6 seconds.ENTERING AND SEARCHING INFORMATION
Using Block  RecognizerWith Block Recognizer, you use a single stroke to write letters, numbers, symbols, and punctuation, which are then converted into typed text.Enter text using Block  Recognizerv  Block Recognizer is available when text entry is possible. v  With Block Recognizer, you use a single stroke to write letters, numbers, symbols, and punctuation, which are then converted into typed text. v  Preferred word list will be disappeared if there is no user reaction for 6 seconds.v  Enter letters by writing in the abc (left) area of the box.v  Enter numbers by writing in the 123 (right) area of the box. v  Enter symbols and punctuation by tapping in either area of the box and then writing the desired character. ENTERING AND SEARCHING INFORMATIONENTERING AND SEARCHING INFORMATION
Using TranscriberTranscriber is a handwriting recognition program that allows you to write in cursive, print, or a combination of both. Transcriber works transparently in the background of programs, recognizing words with its integrated dictionary. When Transcriber is turned on, it interprets stylus movement anywhere on the screen as handwriting input. For more information about using Transcriber, see Help on your device.To start Transcriber1.  Start a program that accepts user input, such as Word Mobile.2.  Tap the Input Selector arrow, and tap Transcriber. The Transcriber introductory screen appears.To write using Transcriber1.  In a program, position the cursor where you want text to appear.2.  Use the stylus to write anywhere on the screen. The handwriting will be converted to text shortly after you lift the stylus from the screen.To enter punctuation and symbolsTranscriber comes with an on-screen keyboard that provides an easy way to add punctuation or a special symbol to existing text.v  From a program, tap   on the Transcriber toolbar. The keyboard remains visible until you tap the button again.ENTERING AND SEARCHING INFORMATION
Notev  To reposition the keyboard, tap and hold the title bar, then drag to the desired location. When no text is selected, you can also open the keyboard by doing the   gesture.To edit text1.  In a program, draw a line across the text you want to edit.2.  After you lift the stylus from the screen, the line will disappear and the selected text will be highlighted.3. Do either of the following:v  Rewrite the text.v  Use gestures to capitalize letters, insert a space, and so on. Transcriber GesturesUse quick strokes of the stylus to edit your text or to insert returns, spaces, or tabs.Do ToInsert a paragraph return at the cursor.The horizontal portion of the gesture must be at least two times longer than the vertical portion.Insert a space at the cursor.The horizontal portion of the gesture must be at least two times longer than the vertical portion.Move the cursor one space back and erase any text.Do the gesture by drawing a line from right to left.ENTERING AND SEARCHING INFORMATIONENTERING AND SEARCHING INFORMATION
Do ToOpen the menu of alternate words if a word is selected or the onscreen Transcriber keyboard if no text is selected.Do the gesture by drawing a line straight down and back up.Change the capitalization of a selected letter, word, or block of text.Do the gesture by drawing a line straight up.Undo the last action.Do the gesture by drawing a line straight up and back down.Copy the selected text.Do the gesture by drawing a line from left to right and back.Cut the selected text.Do the gesture by drawing a line from right to left and back.Do ToPaste copied or cut text.Do the gesture by drawing a line from the lower left of the screen diagonally up toward the right and back down to the right.Insert a tab.The  horizontal  portion  of  the gesture must be at least two times longer than the vertical portion.Notev  You can also use the Enter, Space, and Backspace buttons on the Transcriber toolbar.ENTERING AND SEARCHING INFORMATION
The Transcriber toolbarTap ToYou can set the transcriber options such as writing direction, text and shorthand.You can set the shape of letters as your handwriting.You can enter numbers, punctuation and symbols. You can change text input methods. •  a mode. This is the default for optimum handwriting recognition.•  123 mode. Numbers and some letters are allowed and the calculator is activated.•  A mode. All letters are automatically capitalized.If you are in A or 123 mode, recognition returns automatically to the default mode once you lift the stylus.Tap ToYou can insert a space at the cursor.You can insert a paragraph return at the cursor.You can insert the cursor one space to the left.You can move the cursor one space to the right.back and erase any text.HelpENTERING AND SEARCHING INFORMATIONENTERING AND SEARCHING INFORMATION
Drawing and  Writing on the ScreenYou can draw directly on the screen, or write on the screen and save notes in your own handwriting. To do this, you must set the input mode in Notes to Writing.  If you prefer to use handwriting or frequently add drawings to your notes, you may find it helpful to set Writing as the default input mode. If you prefer typed text, set Typing as the default input mode.To set the input mode for Notes1. Tap Start > Programs > Notes.2. In the note list, tap Menu > Options.3.  In the Default mode box, tap one of the following:v  Writing if you want to draw or enter handwritten text in a note.v  Typing if you want to create a typed note.4. Tap OK.ENTERING AND SEARCHING INFORMATION
To write a note1. Tap Start > Programs > Notes.2. In the note list, tap New.3. Write your text on the screen.4.  When finished, tap OK to return to the note list.Notev  To select handwritten text, tap and hold next to the writing. As soon as dots appear, and before they form a complete circle, quickly drag across the writing. If a letter crosses three ruled lines, it is treated as a drawing rather than text.To draw in a note1. Tap Start > Programs > Notes.2. In the note list, tap New.3.  To draw on the screen, use the stylus like a pen.4.  A selection box appears around your drawing.5.  When finished, tap OK to return to the note list.Notev  To select a drawing (for example, to copy or delete it), tap and hold the drawing briefly. When you lift the stylus, the drawing is selected.ENTERING AND SEARCHING INFORMATIONENTERING AND SEARCHING INFORMATION
Recording a NoteYou can create a stand-alone recording (voice note) or you can add a recording to a note. To create a voice note1. Tap Start > Programs > Notes.2. Do one of the following:v  To create a stand-alone recording, record from the note list.v  To add a recording to a note, create or open a note.3.  If you do not see the Recording toolbar, tap Menu > View Recording Toolbar.4.  Hold your device’s microphone near your mouth or other source of sound.5.  If you adding a recording to a note, tap OK to return to the note list when finished.6.  If you are recording in an open note, an icon will appear in the note.7.  If you are creating a stand-alone recording, the recording will appear in the note list.Notev  To quickly create a recording, press the RECORD button. When you hear the beep, begin your recording. Release the button when you are finished.ENTERING AND SEARCHING INFORMATION
To change recording formats1.  Tap Start > Settings > Personal tab > Input.2.  Tap the Options tab, and in the Voice recording format list, tap the format you want.3. Tap OK.Notev  You can also change recording formats from within Notes. In the note list, tap Menu > Options > Global Input Options link (at the bottom of the page).Searching  InformationYou can search for files and other items stored on your device in the My Documents folder or on a storage card. You can search by file name or by words located in the item. For example, you can search in e-mail messages, notes, appointments, contacts, and tasks, as well as in online Help.To search for a file or an item1. Tap Start > Programs > Search.2.  In Search for, enter the file name, word, or other information you want to search for.ENTERING AND SEARCHING INFORMATIONENTERING AND SEARCHING INFORMATION
3.  If you have looked for this item before, tap the Search for arrow and select the item from the list.4.  In Type, select a data type to help narrow your search.5. Tap Search.6.  The My Documents folder and subfolders are searched.7.  In the Results list, tap the item you want to open. ENTERING AND SEARCHING INFORMATION
Adjust the device volumeYou can set the volume of System and Ringtone, which can be set  the volume On or Vibrate state or Off.v  System volume : You can change the volume for sounds, such as the sound you hear when you tap program names and menu options.v  Ringer volume : You can set the volume of Ringtone. Notev  To adjust the conversation phone volume, you must do it during a call. Adjusting the volume at another time will affect the ring, notification, and MP3 sound levels. When you activate Vibrate mode, sound will automatically be muted and the device will vibrate when an incoming call is received. The Vibrate icon (   ) will appear in the title bar to indicate that Vibrate mode is activated.GENERAL FUNCTIONSGENERAL FUNCTIONS
Making a CallYou  can make  a  call  from  Phone, Contacts, and Speed Dial.Make a call from Phonev  On the Phone screen, tap the desired phone number, and tap the t button.Notev  If you tap a wrong number, tap the Back arrow ( < ) to erase individual numbers one at a time. To delete all the numbers, tap and hold the Back arrow.Make a call from Contactsv  Tap Start > Contacts.v  Tap the desired contact, and tap Call.v  You can also tap the desired contact in the contacts list, and tap the phone number that you want to call. Or, tap and hold the desired contact, and on the shortcut menu, tap Call Work, Call Home, or Call Mobile.GENERAL FUNCTIONS
Make a call from Speed DialUse Speed Dial to call frequently-used numbers with a single tap. For example, if you assign a contact to the location 2 in Speed Dial, you can simply tap and hold 2 on the Phone screen to dial the contact’s number. Before you can create a Speed Dial entry, the number must already exist in Contacts.To create speed dial entry1.  On the Phone screen, tap Speed Dial or tap Menu > View > Speed Dial.2. Tap Menu > New.3.  Tap a contact. Tap the phone number for which you want to create a Speed Dial.4.  In the Location box, select an available location for the new Speed Dial.Notev  Location 1 is generally reserved for your voice mail, and Speed Dial will designate the next available location by default. If you want to place a number in a position that is already occupied, the new number will replace the number that is already there.v  To create a Speed Dial entry from Contacts, tap and hold the contact name, tap Add to Speed Dial, and select an available location for the new Speed Dial. To delete a Speed Dial entry, in the Speed Dial list, tap and hold the desired entry, and tap Delete.GENERAL FUNCTIONSGENERAL FUNCTIONS
Receiving a CallWhen you receive a phone call, a message will appear, giving you the option to either answer or ignore the incoming call.To answer or reject an  incoming callv  To answer the call, tap Answer, or press S on the device.v  To reject the call, tap Ignore, or press E on the device.To end a callOnce an incoming or outgoing call is in progress, you can tap End or press E on the device to hang up.In-call OptionsTo put a call on holdYour device notifies you when you have another incoming call, and gives you the choice of rejecting or accepting the call. If you are already on a call and accept the new call, you can choose to switch between the two callers, or set up a conference call between all three parties.1.  Tap Answer to take the second call, and put the first one on hold.2.  To end the second call and return to the first call, tap End or press END on your device.To switch between two callsv  Tap Swap.GENERAL FUNCTIONS
To set up a conference call1.  Either put a call on hold, and dial a second number; or, accept a second incoming call when you already have one in progress.2. Tap Menu > Conference.Notev  Not all service providers support conference calling. Contact your service provider for details.To turn on and off the  SpeakerphoneThe built-in Speakerphone on your device allows you to talk hands-free or lets other people listen to the conversation.v  During a call, tap Speaker On. The General functions speakerphone icon (  ) appears in the title bar.v  To turn off the speakerphone, tap Speaker Off.WARNING•  To avoid damage to your hearing, do not hold your device against your ear when the Speakerphone is turned on.To mute a callYou can turn off the microphone during a call, so that you can hear the caller but the caller cannot hear you.v  During a call, tap Mute.v  When the microphone is turned off, the mute icon (   ) appears on the screen. Tap Unmute to turn on the microphone again.GENERAL FUNCTIONSGENERAL FUNCTIONS
Additional Dialing InformationMake an emergency callv  Enter the international emergency number for your locale, and tap Talk.Notev  Additional emergency numbers may be included in your SIM card. Contact your service provider for details.Make an international call1.  Tap and hold 0 on the Phone keypad until the + sign appears. The + replaces the international prefix of the country that you are calling.2.  Enter the full phone number you want to dial, and tap Talk. The full phone number includes country code, area code (without the leading zero, if any) and phone number.SIM Tool Kit (STK)A SIM card must be inserted in your device in order to use this feature, which allows you to access a range of information services provided by your service provider.1.  Tap Start > Programs > STK Service icon. A list of provided services appears.2.  To access a service, tap the item in the list.GENERAL FUNCTIONS
SYNCHRONIZING YOUR DEVICESYNCHRONIZING YOUR DEVICEUsing ActiveSyncActiveSync synchronises information on your device with information on your PC, such as Outlook content. ActiveSync can also synchronise over a wireless or cellular network with Microsoft Exchange Server, if your company or service provider is running Microsoft Exchange Server with Exchange ActiveSync. When you synchronise, ActiveSync compares the information on your device with the information on your PC and/or Exchange Server and updates all locations with the most recent information.With ActiveSync, you can:v  Synchronise information, such as Outlook E-mail, Contacts, Calendar, or Tasks information on your device with your PC, as well as pictures, video, and music.v  Synchronise Outlook E-mail, Contacts, Calendar appointments, and Tasks on your device directly with Exchange Server so that you can stay up to date even when your PC is turned off.v  Exchange files between your device and your PC without synchronizing.v  Select which types of information are synchronised and specify how much information is synchronised. For example, you can choose how many weeks of past Calendar appointments to synchronise.
Before you can synchronise information with a PC, you must first install ActiveSync on your PC and create a synchronization relationship between your device and the PC. You can install ActiveSync from the Getting Started disc that comes. ActiveSync is already installed on your device.Once you have installed ActiveSync and set up a synchronization relationship, ActiveSync on the PC recognizes your device when you connect it, and automatically transfers the synchronization settings you specified on your device.You may be able to synchronise your device with Exchange Server through your company or wireless service provider. If you plan to do so, obtain the name of the Exchange Server, your user name, password, and domain name from your administrator before starting the Sync Setup Wizard.To install and set up  ActiveSync1.  Install ActiveSync on your PC, as described on the Getting Started disc. After Setup completes, the Sync Setup Wizard automatically starts when you connect your device to the PC.2.  Follow the instructions on the screen to complete the wizard. In the Sync Setup Wizard, do one or both of the following:v  Create a synchronization relationship between your PC and the device.v  Configure an Exchange Server connection to synchronise directly with Exchange Server.SYNCHRONIZING YOUR DEVICE
3.  Choose information types to synchronise.Notev  When you finish the wizard, ActiveSync synchronises your device automatically. Once synchronization completes, you can disconnect your device from your PC.Setting up Windows Vista™Microsoft Windows Mobile® Device Center is the replacement for Microsoft® ActiveSync® on Windows Vista™. Notev  Some versions of Windows Vista come with Windows Mobile Device Center already installed. If Windows Mobile Device Center is not available on your Windows Vista, you can install it from the Getting Started Disc that came with your device.Set up synchronization in Windows Mobile Device CenterWhen you connect your device to your PC and start Windows Mobile Device Center for the first time, you are asked to create a Windows Mobile partnership with your device. Follow the steps below to create a partnership.SYNCHRONIZING YOUR DEVICESYNCHRONIZING YOUR DEVICE
v  Connect your device to your PC. Windows Mobile Device Center configures itself and then opens.v  On the license agreement screen, click Accept.v  On the Windows Mobile Device Center’s Home screen, click Set up your device. Notev  Choose Connect without setting up your device if you only want to transfer media files, check for updates, and explore your device but not sync Outlook information.v  Select the items you want to synchronize, then click Next.v  Enter a device name and click Set Up. When you finish the setup wizard, Windows Mobile Device Center synchronizes your device automatically. Notice that Outlook e-mails and other information will appear on your device after synchronization.Use Windows Mobile Device CenterTo open Windows Mobile Device Center, click Start > All Programs > Windows Mobile Device Center on your Windows Vista computer. On Windows Mobile Device Center, you can do the following:v  Click Mobile Device Settings to change synchronization settings.SYNCHRONIZING YOUR DEVICE
v  When you click Pictures, Music and Video > ___ new pictures/video clips are available for import, a wizard guides you to tag and transfer photos from your device to the Photo Gallery on your Windows Vista PC.v  Click Pictures, Music and Video > Add media to your device from Windows Media Player to synchronize music and video files using Windows Media™ Player. For more information, see “Windows Media® Player Mobile” in Chapter 11.v  Click File Management > Browse the contents of your device to view documents and files from your device.Synchronizing  InformationWhen you connect your device to the PC using a USB or a Bluetooth connection, ActiveSync will immediately synchronise. While the device is connected, ActiveSync synchronises every time you make a change on either the PC or the device.Synchronizing Outlook  informationIf you have set up a synchronization relationship between your device and the PC, synchronization keeps Outlook information up-to-date on both computers. ActiveSync synchronises a limited amount of information by default to save storage space on your device. You can change the amount of information synchronised for a given SYNCHRONIZING YOUR DEVICESYNCHRONIZING YOUR DEVICE
information type in Settings for the information type.You can set up your device to synchronise with more than one PC or with a combination of one or more PCs and Exchange Server. When synchronizing with multiple computers, the items that you synchronise will appear on all of the computers with which they are synchronised.For example, if you have set up synchronization with two PCs (PC1 and PC2), which have different items, and you synchronise Contacts and Calendar on the device with both computers, the result is as follows:Location New statePC1All Outlook contacts and calendar appointments that were on PC2 are now also on PC1.PC2All Outlook contacts and calendar appointments that were on PC1 are now also on PC2.DeviceAll Outlook contacts and calendar appointments from both PC1 and PC2 are on the device.SYNCHRONIZING YOUR DEVICE
To start and stop  synchronizationv  To synchronise Outlook information and other local information on the PC, including media files, connect your device to the PC using Bluetooth or a cable.v  If you are synchronizing directly with Exchange Server, you can use this connection to the PC to "pass though" to the network, or you can synchronise without connecting to the PC over a cellular or Wi-Fi network.v  In ActiveSync, tap Sync. To end synchronization before it completes, tap Stop. To change which information is synchronised1.  In ActiveSync on the device, tap Menu > Options.2. Do one or both of the following:v  Select the check box for any items you want to synchronise. If you cannot select a check box, you might have to clear the check box for the same information type elsewhere in the list.v  Clear the check box for any items you want to stop synchronizing.3.  To stop synchronizing with one PC completely, tap the PC and tap Delete.Notev  Outlook e-mail can be synchronised with only one computer. To change available synchronization settings, select the type of information and tap Settings.SYNCHRONIZING YOUR DEVICESYNCHRONIZING YOUR DEVICE
To synchronise directly with  Exchange ServerYou can set up synchronization with Exchange Server on your device, if it is available to you through your company or wireless service provider. However, you should first ask your administrator for the following information and then carry on with the steps: Exchange Server name, your user name, password, and domain name.1.  In ActiveSync on the device, tap Menu > Configure Server. If you have not yet set up synchronization with Exchange Server, this will say Add Server Source.2.  In Server address, enter the name of the server running Exchange Server, and tap Next.3.  Enter your user name, password, and domain, and tap Next. To change the rules for resolving synchronization conflicts, tap Advanced.4.  Select the check boxes for the types of information items that you want to synchronise with Exchange Server.5.  To change available synchronization settings, select the type of information, and tap Settings.6. Tap Finish.Synchronizing via BluetoothYou can connect your device to the PC to synchronize using Bluetooth.SYNCHRONIZING YOUR DEVICE
To synchronise with a PC via Bluetooth1.  Firstly, check "Allow connections to one of the following" of the ActiveSync connections Settings menu on your PC.  Select the proper COM port.     If there is not available connections, then you should first make a Bluetooth pairing.2.  Select the ActiveSync via Bluetooth item in Bluetooth connection wizard(Bluetooth Settings->Bluetooth Manager->new->ActiveSync via Bluetooth).Synchronizing Music, Video, and PicturesIf you want to carry your music or other digital media with you along while you travel, ActiveSync works with Windows Media Player to synchronise music, video, and pictures.Other than selecting the Media information type in ActiveSync to be synchronised, all media synchronization settings must be set in Windows Media Player. Before media can be synchronised, you must do the following:v  Install Windows Media Player Version 10 on the PC.SYNCHRONIZING YOUR DEVICESYNCHRONIZING YOUR DEVICE
v  Connect your device to the PC with a USB cable. If the device is currently connected using Bluetooth, you must end that connection before media can be synchronised.v  Insert a storage card into your device (32MB or larger is recommended).v  Set up a sync partnership between the storage card and Windows Media Player.Change Media  synchronization settingsOnce you select the Media information type in ActiveSync to be synchronised, any of your favorite music, video, and picture files in Windows Media Player playlists can be synchronised. All you have to do is set up synchronization in Windows Media Player for those media files.To set up a sync relationship with a storage card1. Open Windows Media Player.2. Click the Sync tab.3. Select the storage card.4. Click Set up Sync.For information about using Windows Media Player on the device, see Chapter 8.SYNCHRONIZING YOUR DEVICE
COMMUNICATIONSCOMMUNICATIONSMessagesThis menu includes functions related to Text Messages, MMS, Email  IMAP, Email POP3 as well as New E-mail Account. You can send and receive Outlook e-mail, Internet e-mail through an Internet service provider (ISP), and text messages. You can also access e-mail from work using a VPN connection. To set up an e-mail accountYou need to set up an e-mail account that you have with an Internet service provider (ISP) or an account that you access using a VPN server connection (typically a work account) before you can send and receive mail.v  Tap Start > Messaging.v  Tap New E-mail Account.v  Enter your e-mail address, and tap Next.  Auto configuration attempts to download necessary e-mail server settings so that you do not need to enter them manually.v  Once Auto configuration has finished, tap Next.v  Enter your name (the name you want displayed when you send e-mail), user name, and password; tap Next.Select the Save Password check box if you want to save your password so that you do not need to enter it again.
COMMUNICATIONSIf Auto configuration was successful, the Your name and User name fields automatically get populated. Tap Next, and then Finish to complete setting up your account, or tap Options to access additional settings.If Auto configuration is unsuccessful or you have an account you access using a VPN server connection, contact your ISP or network administrator for the following information and enter it manually: New Text MessagesYou can write and edit text message, checking the number of message pages. v  Tap Start>Messaging>Text Message>Menu>NewNoteAccount Name “Text Message” can be changed by “SMS”  according to country.v  Enter the e-mail address or text message address of one or more recipients, separating them with a semicolon. To access addresses and phone numbers from Contacts, tap To.v  Enter your message. To quickly add common messages, tap Menu > My Text and tap a desired message.v  To check the spelling, tap Menu > Spell Check.v  Tap Send.
COMMUNICATIONSCOMMUNICATIONSNew Multimedia MessageYou can configure Multimedia message using the device camera to capture photos and video clips while composing a new MMS message, and send them along with your message.NoteYou can also send an MMS message directly from the Pictures & Videos or Camera programs. v  Select a picture from My Pictures, and tap Menu > Send. In Select an account, tap MMS.v  Capture a photo or an MMS video clip using the camera, and tap Send. In Select an account, tap MMS.To start MMS messageYou can compose MMS messages in a combination of various slides, where each slide can consist of a photo, audio or video clip, and/or text.v  Tap Start > Messaging > MMS > Menu > New.v  On the Choose a Media Message screen, select a template from the list of predefined templates.v  In To, enter the recipient’s phone number or e-mail address directly, or tap To, Cc, or Bcc to choose a phone number or an e-mail address from Contacts.v  Enter a subject for your message.v  Tap to select and send a photo or video clip.
v  Enter text and insert audio clips by tapping the respective areas.v  Tap Send to send the message.Managing Messagesv  Tap Start>Messaging, select an Account. v  Tap INBOX, you can view MMS, Outlook E-mail and Text Messages folders. v  Tap the folder and you can select message box. 1.  Deleted Items: You can view the deleted items.  2.  Drafts: You can view saved messages. Select a message and you can edit the message.3.  Inbox: You can view received messaged. Select a message and view. 4.  Outbox: The Outbox is temporary storage place for messages waiting to be sent. Failed messages are also placed in Outbox.5.  Sent Items: Show the messages you sent (Message/Email).NoteYou tap Sort by on the upper right bar and then you can sort messages by Message Type, From, Reveived, Subject.COMMUNICATIONS
Note Downloading messagesThe manner in which you download messages depends the type of account you have:•   To send and receive e-mail for an Outlook E-mail account, begin synchronization through ActiveSync. •    To send and receive e-mail messages for an e-mail account that you have with an Internet Service Provider (ISP) or that you access using a VPN server connection (typically a work account), download messages through a remote e-mail server. •   Text messages are automatically received when your phone is turned on. When your phone is turned off, messages are held by your service provider until the next time your phone is turned on.To reply to or forward a  message1.  Open the message and tap Reply, or Menu > Reply All, or Menu > Forward.2.   Enter your response. To quickly add common messages, tap Menu > My Text and tap a desired message.3.  To check the spelling, tap Menu > Spell Check.4. Tap Send.Tips To see more header information.COMMUNICATIONSCOMMUNICATIONS
NoteYou will be alerted when you have received messages. They will be stored in the Inbox.In the Inbox, you can identify each message by icons.If the phone shows ‘No space for SIM message’, you have to delete some messages from the Inbox. If the phone displays ‘No space for message’, you can make space of each repository by deleting messages, media and applications.* SIM messageSIM message means the message exceptionally stored in SIM card. You can move this message to the phone.COMMUNICATIONS
PhoneYou can use easily with SmartDialler feature If you press a number on the keypad, the screen displays the phone number in Call History, Starting with the number you enter, and the names in Contacts or Call History, starting with the characters you enter.You can select you want to call number. You can also make an international call or emergency call.NoteYou can find your phone number by tapping Start > Settings > Phone.Make a callEnter a phone number by tapping the Dialler screen keypad or by pressing the number on the keypad. Tap Talk or press S to make a call. When a call is connected, the call duration time displays. Ending a callYou can tap End or press E to end the call.COMMUNICATIONSCOMMUNICATIONS
Make a call from HistoryTap Call History, you can choose and call. When you tap the call you want to view, the screen shows the time and date you received of made a call and the duration of a call. You can personalize the settings of your phone, the services you have, and the network to which you are connected. Make a call using Speed dialYou can create a speed dial list. Tap Speed Dial>Menu>New, you can select the contact list with tapping.COMMUNICATIONS
Call logsYou can view the recently missed, received and dialed calls. You can make a call, send text message, multimedia message and save to contacts.You can delete the number selected or all at once. Save to ContactsYou can add the contact info from a communication event to your Contacts.View NoteTo view detailed information about the communication event.DeleteDelete all log contents.Send Text Message...After you have found the number you want, you can send a text message. Send Multimedia MessageAfter you have found the number you want, you can send multimedia message. [Option menu]COMMUNICATIONSCOMMUNICATIONS
Filterv  All Calls: Allows you to view the missed, received, and dialled call records. You can make a call, or send a message to the number you have selected from the records. You can also save the number in Contacts.v  Missed: Allows you to view the last 20 phone numbers from which someone unsuccessfully tried to reach you.v  Outgoing: Allows you to view the last 20 phone numbers that you have called or tried to call.v  Incoming: Allows you to view the last 20 phone numbers that you have answered.Delete All CallsYou can delete all calls. Call Timers...You can view the duration of calls to and from your phone.ContactsContacts is your address book and information storage for the people and business you communicate with. Store phone numbers, e-mail addresses, home addresses, and any other information that relates to a contact, such as a birthday or an anniversary date. You can also add a picture or assign a ring tone to a contact.COMMUNICATIONS
From the contact list, you can quickly communicate with people. Tap a contact in the list for a summary of contact information. From there, you can call or send a message.If you use Outlook on your PC, you can synchronise contacts between your device and PC.Overview of contactsContacts is your address book and information storage for the people and business you communicate with. Store phone numbers, e-mail addresses, home addresses, and any other information that relates to a contact, such as a birthday or an anniversary date. You can also add a picture or assign a ring tone to a contact.To create a contact1. Tap Start > Contacts.2.  Tap New and enter the contact information.3. When finished, tap OK.COMMUNICATIONSCOMMUNICATIONS
Tipv  If someone who is not in your list of contacts calls you or sends you a message, you can create a contact from Call History, or from the message by tapping Menu > Save to Contacts. In the list of contact information, you’ll see where you can add a picture or assign a ring tone to a contact.To change contact  information1. Tap Start > Contacts.2. Tap the contact.3.  Tap Menu > Edit and enter the changes.4. When finished, tap OK.To work with the contact listThere are several ways to use and synchronise the contact list. Here are a few tips:1. Tap Start > Contacts.2.  In the contact list, do any of the following:v  In Name view, you can search for a contact by entering a name or by using the alphabetical index. To switch to Name view, tap Menu > View By > Name.v  To see a summary of information about a contact, tap the contact. From there you can also make a call or send a message.v  To see a list of available actions for a contact, tap and hold the contact.COMMUNICATIONS
v  To see a list of contacts employed by a specific company, tap Menu > View By > Company. Then, tap the company name.To copy SIM contact to  ContactsIf you have saved contacts on your SIM card, you can copy them into Contacts on your device one by one.1. Tap Start > Contacts.2. Tap the contact to copy.3.  Tap Menu > Save to Contacts.  Or similarly you can copy Contacts on your device to your SIM card one by one, by selecting Save to SIM menu.To find a contactThere are several ways to find a contact when your contact list is long.1. Tap Start > Contacts.2.  If you are not in Name view, tap Menu > View By > Name.3. Do one of the following:v  Begin entering a name in the provided text box until the contact you want is displayed. To show all contacts again, tap the text box and clear the text.v  Use the alphabetical index displayed at the top of the contact list. When you tap the alphabetical index, the selection highlight moves to the first item beginning with that alphabet.COMMUNICATIONSCOMMUNICATIONS
v  Filter the list by categories. In the contact list, tap Menu > Filter. Then, tap a category you’ve assigned to a contact. To show all contacts again, select All Contacts.v  You can also find a contact tap Start > Programs > Search.COMMUNICATIONS
MULTIMEDIAMULTIMEDIAIf you tap the Multimedia icon, you can enter the menu related to Multimedia such as camera, video camera, voice recorder, MP3, Radio, and Java games.Notev  Do not change the default folder names, or it will not work properly.CameraDo one of the following to display the camera capture screen:1.  Press the c key to enter camera capture mode directly. Or, tap the Multimedia icon, and then select Camera menu.2.  Focus on the subject to capture the image, and then press e or OK/Confirm key.You can select the Internal camera or External camera with tapping Camera Switch on the left down side.3.  You can save the picture automatically.4.  The photo is saved in the My Pictures folder. You can find with tapping Pictures & Videos. Before taking a picture, you can view the menu as follows:v  Mode: Camera/Video Camera/Frame Shotv  Camera Switch: Internal/Externalv  Pictures & Videos : Go to Pictures & Videos programv  Resolution: 320X240, 640X480, 1024X768, 1600X1200v  Timer: Allows you to select the delay time (Off, 5 Seconds, 10 Seconds, 15 seconds). Then the phone takes a photo after the specified time.
v  Burst Mode: 1, 3, 6, 9v  Flash: Allow you to set the flash when you take a photo in dark place. (Off/Always on/When taking)v  White Balance: Auto, Daylight, Cloudy, Illuminate, Indoorsv  Filter: None/Black and White/Negative/SepiaConfiguring Camera modeFrom the Camera preview screen, tap Menu>Camera Options to access camera options.v  Save file:: You can set the photo to automatically save or manually save after taking.(Automatic/Manual)v  Video type: You can choose the type with Normal or MMS.(Normal/MMS). If you choose MMS type, video recoding will be stoped automatically when it reach MMS maximum size.v  Storage: You can select a storage space. Phone or Memory card.(Internal/External)v  Shtter sound:v  Quality: You can set the camera quality. (Super fine/ Fine/ Standard)v  Auto focus: You can set auto focus(On/ Off) MULTIMEDIA
Video Camera1.  Select Video Camera menu. Once the settings are displayed on the screen, you can scroll through them touching the icons. Scroll to the setting you wish to change, tap the screen and it will bring up the setting values. Scroll to your preferred choice.2.  To start recording press c or OK/Confirm key. As soon as it starts to record a timer will be displayed.Same as Camera settings except of Resolution, Sound. For details, refer to Multimedia > Camerav  Resolution: 128x96, 176x144, 320x240v  Sound: With/Without3.  Press the c or OK/Confirm key to end the recording and this will now be saved.MULTIMEDIAMULTIMEDIA
Frame shotYou can apply one of 19 frame effects when taking a picture .Tap the navigation button right or left, to change the frame.  Same as Camera settings. For details, refer to Multimedia > CameraWindows MediaYou can use Microsoft Windows Media Player 10 Mobile for Pocket PC to play digital audio and video files that are stored on your device or on a network, such as on a Web site.Using Windows Media Player, you can play both audio and video files. These are the following file formats that are supported by this version of Windows Media Player (WAV, WMA, WMV, MP3, MIDI,SP-MIDI, SMAF, AAC,AMR,3GP,MP4 etc).MULTIMEDIA
Icon Description       Plays/Pauses a file.   Increases the volume level.   Decreases the volume level.   Skips to the beginning of the current file or to the previous file.   Skips to the next file.  Adjusts the playback progress of a selected file.       Turns the sound on or off.   Displays a video by using the entire screen (full screen).   Displays a Web site where you can find music and videos to play.MULTIMEDIAMULTIMEDIA
Windows Media Player has three primary screens:Playback screenThe default screen that displays the playback controls (such as Play, Pause, Next, Previous, and Volume), the album art window, and the video window. You can change the appearance of this screen by choosing a different skin.When you are viewing the Playback screen, the following commands appear on Menu.v  Library: Displays the Library screen so you can choose a file to play.v  Play/Pause: Starts or pauses playback.v  Stop: Stops playback.v  Shuffle /Repeat: Plays the items in the Now Playing playlist randomly/ repeatedly.v  Full Screen: When a video is playing, displays it by using the entire screen.v  Options: Lets you adjust various Windows Media Player options, including network, skin, and hardware button options.v  Properties: Displays information about the currently playing file.v  About: Displays information about Windows Media Player, such as the version number.About the screens and menusNow Playing screenThe screen that displays the Now Playing playlist. This special playlist indicates the currently playing file and any files that are “queued up” to play next.MULTIMEDIA
When you are viewing the Now Playing screen, the following commands appear on Menu.v  Library: Displays the Library screen so you can choose a file to play.v  Move Up/ Down: Moves the selected item up/down in the playlist order.v  Remove from Playlist: Playlist Deletes the selected item from the playlist.v  Shuffle/Repeat: Plays the items in the Now Playing playlist randomly/ repeatedly.v  Save Playlist:v  Clear Now Playing: Playing Deletes all items from the Now Playing playlist.v  Error Details: Displays error information about the selected item (an exclamation mark appears before the item name if error details are available).v  Properties: Displays information about the selected file.Library screenThe screen that lets you quickly find your audio files, video files, and playlists. It contains categories such as My Music, My Video, My TV, My Playlists and Now playing.When you are viewing the Library screen, the following commands appear on Menu.v  Queue Up: Adds the selected item to the end of the current (Now Playing) playlist.MULTIMEDIAMULTIMEDIA
v  Delete from Library: Deletes the selected item from the library.v  Now Playing: Displays the Now Playing screen.v  Library: Displays the Library screen so you can choose a file to play.v  Update Library: Adds new items to the library by searching your device or storage card.v  Open File: Lets you find and play files that are stored on your device or storage card but that are not in the library..v  Open URL: Lets you play a file on a network, such as the Internet.v  Properties: Displays information about the selected file.At the bottom of each screen is a menu called Menu. The commands on this menu change depending upon which screen you are viewing.FM RadioYou can search radio stations and enjoy listening to the radio.Notev  To improve the radio reception, extend the headset cord which functions as the FM antenna.v  You cannot use the FM radio without the headset.MULTIMEDIA
1.  Tap the corresponding number key of a channel to store the currently selected radio station into.2.  After presetting the radio channels, you can listen to all the preset channels.3.  You can adjust frequency and change the radio station in the selected channel. You can search for the next station by tapping for at least two seconds.4.  You can access the following option menus tapping menu tap. v  Scan: If you tap Scan, it automatically sets the radio channels. If you want to save current channel, then stop->Menu->save preset.v  Save preset: You can set the channel that you use frequently. It can be found in preset list. v  Options: Allows to Enable RDS and Alternative Frequency SwitchingYou can hear FM radio with Bluetooth Headset if Bluetooth Hand-free channel opened.Notev  Enable RDS: On the screen displays the received data message from radio station.   Pictures & Videos The Pictures and Videos program collects, organizes, and sorts images and video clips in the following formats on your device.File Type File ExtensionsImage *.bmp, *.jpgVideo *.avi, *.wmv, *.mp4, *.3gpMULTIMEDIAMULTIMEDIA
You can view the pictures as a slide show, bean them, send them via e-mail, edit them, or set them as the background on the Today screen.To copy a picture or video clip to your device You can copy pictures from your PC and view them on your device.v  Copy the pictures from your PC or a storage card to the My Pictures folder on your device.Notev  You can also copy pictures from your PC to your device using a memory card. Insert the memory card into the memory card slot on your device, then copy the pictures from your PC to the folder you created on the memory card.To view pictures1.  Tap Start > Programs > Pictures & Videos. The images in the My Pictures folder appear as thumbnails by default.2.  Select a picture and tap View. If you cannot find a picture in the default My Pictures folder, go to another folder by tapping the Down arrow.MULTIMEDIA
v  Zoom :  Allows the panel buttons to zoom in or out of the area highlighted by the red box.To play videos with audio1.  Tap Start > Programs > Pictures & Videos. The video files in the My Pictures folder appear as thumbnails by default, which appear with a media icon.2.  Select a video and tap the thumbnail to play it with the built-in Windows Media Player.To sort pictures and video clipsIf you store a large number of pictures or video clips on your device, you may find it helpful to sort them to quickly find a specific picture or clip. You can sort by name, date, and size.1.  Tap Start > Programs > Pictures & Videos.2.  Tap the sort list (labeled Date by default), and select the item you want to sort by.To delete a picture or video clipDo any of the following to remove a picture or a video clip:MULTIMEDIAMULTIMEDIA
v  Select a picture or video clip on the Pictures & Videos screen, and tap Menu > Delete. Tap Yes to confirm the deletion.v  Tap and hold the thumbnail of the picture you want to delete, then tap Delete.To edit a picture or video clipYou can rotate, crop, and adjust the brightness and color contrast of your pictures.1.  Tap Start > Programs > Pictures & Videos.2. Tap the picture you want to edit.3.  Tap Menu > Edit, and do any of the following:v  To rotate a picture 90 degrees counterclockwise, tap Rotate.v  To crop a picture, tap Menu > Crop. Then, tap and drag to select the area to crop. Tap outside the box to stop cropping.v   To adjust the brightness and contrast levels of a picture, tap Menu > AutoCorrect.Notev  To undo an edit, tap Menu > Undo. To cancel all unsaved edits you made to the picture, tap Revert to Saved.To set a picture as the Today screen background You can use a picture as the background on the Today screen.1.  Tap Start > Programs > Pictures & Videos.MULTIMEDIA
2.  Select the picture you want to set as the background.3.  Tap Menu > Set as Today Background.4.  In Transparency level, select a higher percentage for a more transparent picture, or a lower percentage for a more opaque picture.5. Tap OK.To send pictures and video clips via e-mail You can send pictures and video clips to other devices via e-mail.1.  First, set up Messaging to send and receive messages.2.  From the program, select the item you want to send.3.  Tap Menu > Send, and Select an Account (such as Outlook E-mail or MMS) to send the attached item.4.  A new message is created with the item attached.5.  Enter the recipient name and subject, and tap Send. The message will be sent the next time you synchronise your device. Notev  Pictures and video clips are saved automatically before they are sent.To send pictures and video clips via BluetoothYou can send pictures and video clips to other devices via Bluetooth. MULTIMEDIAMULTIMEDIA
To assign pictures to contactsYou can assign a picture to a contact so that you can easily identify the contact at any point of time.1.  Tap Start > Programs > Pictures & Videos.2.  Select the picture you want to assign to a contact.3. Tap Menu > Save to Contact.4.  Tap the contact, or navigate and tap Select to choose the contact from your Contacts list.To use advance options1.  Tap Start > Programs > Pictures & Videos.2.  Select the picture for which you want to configure further settings.3.  Tap Menu > Options. The Options screen appears, allowing you to:v  Resize a picture so that you can send it faster to someone using your e-mails.v  Configure the view settings during slide shows and activate screensaver options.v  Configure your device camera and camcorder settings.v  Send: You can send the selected image via Message, E-mail  but some files which are protected by Digital Rights Management (DRM) cannot send.MULTIMEDIA
v  Save to Contact: You can set the image of selected entry in contacts. When you receive an incoming call, the image saved in contact is displayed.v  Save as: You can save as file name. v  Delete: Deletes the selected image.v  Edit: You can crop or rotate the image.v  Properties: You can preserve the image.v  Play Slide Show: You can view the images as a slide show.v  Set as Today Background...: You can set the image as screen background.v  Options...: When sending pictures in e-mail, pictures can be resized so that they transfer faster. Use this picture size: Original size/Large(640x480)/Medium(320x240)/Small(160x120)v  Send to your space Sends the selected file to MySpace site. You can use MySpace after sign in Windows live.v  Send via BluetoothMULTIMEDIAMULTIMEDIA
Mobile JavaCT810 supports Java and hence you can easily download java games and other java applications from the internet.Mobile Java has 2 subfolders : Games and Applications. Each folder has an embedded link for downloading Games or Applications from the internet .Please note that additional costs may be incurred when using online servicesGames In the Games folder 2 Java games (Solitaire and Bubble Breaker) have been added and you can download the full versions of these games from the internet.To play, tap the game that you want to enjoy and tap again to start. MULTIMEDIA
PROGRAMSInternet ExplorerInternet Explorer Mobile is a full-featured Internet browser, optimized for use on your mobile device.In the Address bar, enter the web address you want to visit and then tap . Tap the down arrow in the Address bar to choose one from previously entered addresses.v  Home: You can launch the web browser and access the homepage.v  Address Bar: You can manually enter a URL address and access the associated web page.v  Favorites...: You can store frequently accessed or favourite URLs/Pages. Send, Add new, Edit, Mark/Unmark or Delete operations can be performed on Bookmarks. Several preconfigured URLs are stored as bookmarks.v  Add to Favorites...:1.  Press the left soft key [Options] and select 2.Add new from Options menu.2.  Enter the title and associated URL information.3. Press Add button to savev  Forward:: Access a URL from the history list.v  Refresh: Refresh the current page.   v  History...: You can view the list of the pages you've already connected.v  View-  Text Size: Largest/Larger/Medium/Smaller/Smallest -  One Column: Fit horizontally into the available screen width, or until the minimum possible width is reached for all columns.PROGRAMS
-  Fit To Screen: Dynamically resizes web pages to maximize viewing on handheld devices without requiring a user to scroll across a page.-  Desktop: Automatically by designating a Web page that is displayed on the desktop computer.-  Full Screen: You can view in the Full screen  - Show Picturesv  Edit: Edit the title and associated URL information.- Cut: You can cut the text.- Copy: You can copy the text.- Paste: You can paste the text.-  Select All Text: You can select all of the text. v  Tools-  Send Link...: You can send the Link by text message.-  Properties...: You can view the page's information.  - Options...General: You can set the default page and character.Memory: You can set the saved number of pages visited in the past and delete web content that has been proviously viewed or synchronized with the device.Security: Tap the security settings box for warning with the page. PROGRAMS
Word MobileWord Mobile is a streamlined version of Microsoft Word. Word documents created on your PC can be opened and edited on your device. You can also create and edit documents and templates in Word Mobile and save them as *.doc, *.rtf, *.txt, and *.dot files.You can have only one document open at a time. When you open a second document, the first one is saved and closed automatically. When you close a newly created document, it is automatically named after the first several words in the document and placed in the Word Mobile document list. You can easily rename the document with a more meaningful name and move it to another folder or a storage card.To create a file1. In Word Mobile, tap New.2.  You’ll see either a blank document or template, depending on what you’ve selected as the default template.3. Enter text as desired.4.  When finished, tap OK to save the file.Unsupported features in Word Mobile Word Mobile does not fully support some features of Microsoft Word such as revision marks and password protection. Some data and formatting may be lost when you save the document on your device.The following features are not supported in Word Mobile.PROGRAMSPROGRAMS
• Backgrounds• Shapes and text boxes• Artistic page borders• Smart tags• Metafilesv  Bi-directional text. While Word Mobile will open documents containing bi-directional text, the indentations and alignment may be displayed and saved incorrectly.v  Password-protected files. Word Mobile does not support opening password-protected documents. You must first remove the password protection in Word on the PC if you want to view the document on the device.v  Document protection. Word Mobile does not support displaying files that have been protected in Word on the PC.The following features are partially supported in Word Mobile.v  Picture bulletsv  Revision marks: When you open a document that has revision marks in Word Mobile, the document appears as if all revision marks were accepted. When you save the document in Word Mobile, revision marks are lost.v  Table styles: When you save a document in Word Mobile, some or all the formatting that is defined in the table style is lost.  PROGRAMS
v  Underline styles. Underline styles not supported by Word Mobile are mapped to one of the four supported styles: regular, dotted, wavy, or thick/bold/wide.v  Legacy Pocket Word files. You can open *.psw files in Word Mobile; however, if you edit a file, you will need to save it in *.doc, *.rtf, *.txt, or *.dot format.The following features are not supported on the device; however, they are retained in the file so that when a file is opened on the PC again, they appear as expected.v  Footnotes, endnotes, headers, footersv  Page breaks: Word Mobile does not display breaks between pages. However, all page breaks except for breaks at the end of a document are retained in the document.v  Lists: When you open the document on the computer again, indented lists are displayed in the original form.v  Fonts and font sizes. Fonts not supported by the device are mapped to the closest font available, although the original font will be listed on the device.To get more help about Word Mobile•  When in Word Mobile, tap Start > Help.PROGRAMSPROGRAMS
Excel MobileExcel Mobile makes it easy for you to open and edit Excel workbooks and templates created on your PC. You can also can create new workbooks and templates on your device.Notev  Work in full-screen mode to see as much of your workbook as possible. Tap View > Zoom and select a percentage so that you can easily read the worksheet.Unsupported features in Excel MobileExcel Mobile does not fully support some features such as formulas and cell comments. Some data and formatting may be lost when you save the workbook on your device. Note the following Excel Mobile formatting considerations:v  Alignment. Horizontal, vertical, and wrap-text attributes remain the same, but vertical text appears horizontal.v  Borders. Appear as a single line.v  Cell patterns. Patterns applied to cells are removed.PROGRAMS
v  Fonts and font sizes. Fonts not supported by your device are mapped to the closest font available. The original font is listed on your device. When the workbook is opened in Excel on your PC again, the data is displayed in the original font.v  Number formats. Numbers formatted using the Microsoft Excel 2007 Version 6.1  conditional formatting feature are displayed in Number format.v   Formulas and functions. If an Excel file contains a function that is not supported by Excel Mobile, the function is removed, and only the returned value of the function appears. The following formulas are also converted to values: formulas entered as an array or containing an array argument, for example, =SUM({1;2;3;4}); formulas containing external link references or an intersection range reference; and formulas containing references past row 16384 are replaced with #REF!PROGRAMSPROGRAMS
v   Protection settings. Most worksheet and workbook protection features are disabled but not removed. However, support for password protection has been removed. Workbooks that are password-protected or workbooks in which one or more worksheets are password-protected cannot be opened. You must remove the password protection in Excel on the PC and then synchronise to open the file on the device.v  Zoom settings. Are not retained. Excel supports a per worksheet zoom setting, while the Excel Mobile zoom setting is applied to the entire workbook.v  Worksheet names. Names that reference worksheets within the same workbook are displayed accurately, but names that refer to other workbooks, arrays, for example, ={1;2;3;4}, array formulas, or intersection ranges are removed from the name list. If a name is removed from the list, it is left in formulas and functions, causing those formulas to be resolved as “#NAME?” All hidden names are not hidden.PROGRAMS
v  AutoFilter settings. Are removed. However, you can use the AutoFilter command in Excel Mobile to perform similar functions. If you have an AutoFilter applied to a worksheet that causes rows to be hidden, the rows remain hidden when the file is opened in Excel Mobile. Use the Unhide command to display the hidden rows.v   Chart formatting. All charts will be saved the way they are shown in Excel Mobile. Unsupported chart types are changed to one of these supported types: Column, Bar, Line, Pie, Scatter, and Area. Background colors, gridlines, data labels, trend lines, shadows, 3D effects, secondary axes, and logarithmic scales are turned off.v  Worksheet features. The following features are not supported in Excel Mobile and are removed or modified when a workbook is opened on the device: hidden sheets are not hidden; VBA modules, macro sheets, and dialog sheets are removed and replaced with a place holder sheet; text boxes, drawing objects, pictures, lists, conditional formats, and controls are removed; pivot table data is converted to values.PROGRAMSPROGRAMS
PowerPoint MobileWith PowerPoint Mobile, you can open and view slide show presentations created on your PC in *.ppt and *.pps format with PowerPoint '97 and later. Many presentation elements built into the slide shows such as slide transitions and animations will play back on the device. If the presentation is set up as a timed slide show, one slide will advance to the next automatically. Links to URLs are also supported.PowerPoint features not supported on the device include:v   Notes. Notes written for slides will not be visible.v   Rearranging or editing slides. PowerPoint Mobile is a viewer only.v   File formats. Files created in *.ppt format earlier than PowerPoint '97 and HTML files in *.htm and *.mht formats are not supported.To start a slide show  presentation1.  Tap Start > Programs > PowerPoint Mobile.2.  In the presentation list, tap the slide show you want to view.3.  Tap the current slide to advance to the next slide.If the presentation is set up as a timed slide show, slides will advance automatically.PROGRAMS
To stop a slide show•  In a PowerPoint Mobile presentation, tap > End Show.To navigate between slidesYou can advance to the next slide if a presentation is not set up as a timed slide show, return to the previous slide, or go to any slide out of sequence.1.  Tap Start > Programs > PowerPoint Mobile.2.  Open the presentation you want to view.3.  Tap > Next or Previous, or tap Go to Slide and tap the the slide you want to view.Tipv  Simply tap the current slide to go to the next one.Notev  If you have zoomed in to see a slide in more detail, you cannot navigate to another slide until you zoom out. Tapping Next or Previous may play an animation on a slide rather than navigate to another slide.PROGRAMSPROGRAMS
File ExplorerThe File Explorer application allows you to open an explorer window similar to a desktop Windows based system. The explorer window allows you to navigate through your phone to locate desired folders and files.You can also quickly manage, delete, copy, or edit any files and folders on your phone. You can create new folders.If you want to see the files or folders in the SafeStore or Storage Card folder, tap .To view the files or folders in the phone’s memory, tap .To open a file on a network, tap . Enter the file path and tap OK.Tap the folder category (labelled My Documents by default) and then the folder that you want to view.MessengerTo use Windows Live Messenger, you must have a Microsoft Passport™ account, Hotmail account, or a Microsoft Exchange e-mail account. If you have a Hotmail® or MSN account, you already have a Passport. Once you have obtained either a Microsoft Passport or a Microsoft Exchange account, you are ready to set up your account.Windows Live Messenger delivers the features of Windows Live Messenger to your mobile device. With Windows Live Messenger you can do the following:PROGRAMS
v  Send and receive instant messages.v  See which contacts are online or offline.v  Subscribe to status updates for selected contacts so you know when they come online.v  Block contacts from seeing your status or sending you messages.Before you can use Windows Live Messenger, your device must be connected to the Internet. For information about setting up an Internet connection. Notev  You must have either a Microsoft .NET Passport or Hotmail account to use Windows Live Messenger. If you have a Hotmail.com or MSN.com e-mail address, you already have a Passport. To get a Passport account, go to http://www.passport.com. To get a Hotmail account, go to http://www. hotmail.com.PROGRAMSPROGRAMS
To start Windows Live Messenger1.  Tap Start > Programs > Messenger.To sign in or outv  To sign in, tap Sign In. Enter the  e-mail address and password for your Passport or Hotmail account, and tap Next. Signing in may take several minutes, depending on your connection speed.v  To sign out, tap Menu > Sign Out. Your status changes to Offline.To add or delete contactsv  To add a contact, tap Menu > Add new contact, and follow the instructions on the screen.v  To delete a contact, tap the contact's name, and tap Menu > Contact options > Remove contact.To send an instant message1.  Tap the contact to whom you want to send a message.2.  Enter your message in the text entry area at the bottom of the screen, and tap Send.PROGRAMS
To block or unblock contactsv  To block a contact from seeing your status and sending you messages, tap the contact, then tap Menu > Contact options > Block contact.v  To unblock a contact, tap the name of the blocked contact, then tap Menu > Unblock contact.To check your own Messenger statusv  Tap your own name at the top of the page. Your current status is indicated in the displayed list by a bullet point.To change your display namev  Tap your own name at the top of the page, and tab Change appearance. Enter your Personal message and tab Done.To get more help about Windows Live Messengerv  When in Windows Live Messenger, tap Start > Help.NotesNotes helps you to quickly capture thoughts, questions, reminders, to-do lists, and meeting notes. You can create handwritten and typed notes, record voice notes, convert handwritten notes to text for easy readability, and send notes to others.PROGRAMSPROGRAMS
Entering information in NotesYou can enter typed text by using the on-screen keyboard or handwriting recognition software. You can also use the stylus to write or draw directly on the screen. On devices that support recording, you can create a standalone recording or embed a recording in a note.To set the default input mode for NotesIf you frequently add drawings to your notes, you may find it helpful toset Writing as the default input mode. If you prefer typed text, select Typing.1. Tap Start > Programs > Notes.2. In the note list, tap Menu > Options.3.  In the Default mode box, tap one of the following:v  Writing if you want to draw or enter handwritten text in a note.v  Typing if you want to create a typed note.4. Tap OK.To create a note1.  Tap Start > Programs > Notes. In the note list, tap New.2.  Tap the Input Selector arrow next to the Input Method icon on the menu bar, tap the input method you want, and enter your text.3.  If the Input Selector arrow is not displayed, tap the Input Method icon.4.  When finished, tap OK to return to the note list.PROGRAMS
TasksUse Tasks to keep track of things you need to do. A task can occur once or repeatedly (recurring). You can set reminders for your tasks and you can organize them using categories.Your tasks are displayed in a task list. Overdue tasks are displayed in red.To create a task1. Tap Start > Programs > Tasks.2. Tap Menu > New Task3.  Enter a subject for the task, and fill in information such as start and due dates, priority, and so on.4. When finished, tap OK..Notev  You can easily create a short, to-do-type task. Simply tap the Tap here to add a new task box, enter a subject, and press ENTER. If the task entry box is not available, tap Menu > Options and select the Show Tasks entry bar check box.To change the priority of a taskBefore you can sort tasks by priority, you need to specify a priority level for each task.PROGRAMSPROGRAMS
1. Tap Start > Programs > Tasks.2.  Tap the task you want to change the priority for.3.  Tap Edit and in the Priority box, tap a priority level.4. Tap OK to return to the task list.Notev  All new tasks are assigned a Normal priority by default.To set a default reminder for all new tasksYou can have a reminder automatically turned on for all new tasks you create.1. Tap Start > Programs > Tasks.2. Tap Menu > Options.3.  Select the Set reminders for new items check box.4. Tap OK to return to the task list.Notev  The new tasks must have due dates set in order for the reminder to take effect.To show start and due dates in the task list1. Tap Start > Programs > Tasks.2. Tap Menu > Options.3.  Select the Show start and due dates check box.4. Tap OK.PROGRAMS
To locate a taskWhen your list of tasks is long, you can display a subset of the tasks or sort the list to quickly find a specific task.1. Tap Start > Programs > Tasks.2.  In the task list, do one of the following:v  Sort the list. Tap Menu > Sort By, and tap a sort option.v   Filter the list by category. Tap Menu > Filter, and tap the category you want displayed.Notev  To filter your tasks further, tap Menu > Filter > Active Tasks or Completed Tasks.PSNotesPSNote is a multimedia input editor with handwriting recognition for Pocket PC. You can enter handwritten text (in English, French, German, Italian or Spanish, depending on the installation) in various styles (that is immediately converted into digital text), drawings, images, video, or sound and send it via e-mail, SMS or MMS. Standard tools that perform only one action.PROGRAMSPROGRAMS
•   The contents of the toolbar change depending on whether you are working on:- a text document: menusend pen colortools pen widthsave zoom styleinput type- or a drawing: menusend pen colortools pen widthsave zoom styleinput type- or a multimedia item: menusend playtools replacesave zoom input typeNew documentv  Tap Menu>File>New, to create a new document.v  You can write down on the note and tap Menu>File>Save or File>Save as(You can select the Microsoft Word or RTF document format.)to save the document. If you need more information, please tap Menu>Help, it shows more tips.  Writing text There are 6 different input modes for different handwriting styles. v  Tap Menu>Insert>Text> and set the input type on the toolbar.PROGRAMS
To change the fontv  Tap Menu>Options>the Advanced tab. v  To use a new font, open the drop-down list and choose the new font.  v  To insert the current date and time automatically into your document, tap>Menu>Insert>Time/date. Making drawingsYou can draw in the writing zone or over the top of an inserted image. v  Tap Menu>Insert>Drawing.v  To select a color that has been used in a drawing, tap the shape tool on the toolbar.Inserting imagesTap Menu>Insert>Image, to insert an image as a drawing background.Inserting MultimediaTap Menu>Insert>Movies, to insert a multimedia item from a file, open the options on the input type tool. Notev  Multimedia items can be sent by e-mail or MMS.  Tap Menu>Insert>Audio, to insert a sound file.PROGRAMSPROGRAMS
To cut/copy an entire areav  To cut/copy a portion of text or part of a drawing, select that part (double-click or drag for text,  for drawings). To change the zoom level v  Tap Menu>Zoom or zoom tool. You can set the zoom level (0.25, 0.5, 1, 1.5, 2).To use the personal dictionary v  Tap Menu>Options>the Dictionary tab. v  Type the word you wish to enter into the Word text box. To type in a word, open the SIP list  and choose the keyboard option. To write a word, open the SIP list  and choose a stylus input option. v  Tap the Add button to enter that word in your personal dictionary. The word will then appear in the Dictionary list.Notev  Once your writing is recognized, the input zone is cleared automatically. It need to write clearly. Space letters and words comfortably, avoiding very cramped words, or large spaces within words.PROGRAMS
Auto ProfileYou can configure the network profile for Internet, MMS, Java, Email automatically.To configure network profilev Tab Start>Programs>AutoProfile.v  Select proper operator in the operator list and tab Yes.v Reboot the device.Notev  Executing Auto Profile will remove current network profile exept for user created bookmark, user created email and other messages.PROGRAMSPROGRAMS
Internet SharingNotev  ActiveSync software version 4.5 or higher is required.v  Connect the USB cable to the PC.v  Tap Start>Programs>Internet Sharing.v  Set PC Connection to USB or Bluetooth PANv  Set Network Connection to proper APNv  Tap Connect  and Left Soft Key in the bottom linev  Data connection indicator (G/ E/ 3G/ H) is displayed when PDP activation is performed successfully.Notev  Operating System on your PC is required Windows XP SP2 or later. PROGRAMS
Phone settingYou can edit the general settings related to making and receiving calls.PhoneSoundv  Ring type: This option determines the incoming call notification mode. You can select from [Ring], [Increasing ring], [Ring once], [Vibrate], [Vibrate and ring], [Vibrate then ring], [None].v  Ring tone: You can select the ringtone for incoming voice calls.v  Keypad: You can set the key tone to be played when pressing the keys.(Long tones/Short tones/Off)SecurityWhen this is set to On, you are requested to enter your PIN each time you switch the phone on. ServicesTo access settings for a service, select it from the following list and tap "Get Settings".Call BarringBlock incoming calls : All calls, When roaming, Off Block outgoing calls : All calls, International, International except to home countryTo edit mobile call barring settings, you need a password. You obtain the barring password from your service provider upon subscription to this network service.SETTINGSSETTINGS
SETTINGSCall barring affects all voice and data calls, except emergency calls.Caller IDScroll to ‘Everyone’ to display your caller identity to the people you call, ‘No one’ to hide it or ‘Only to contacts’  to display your caller identity when you call from the contacts.Call ForwardingAllows you to forward your incoming calls to another phone number.Call WaitingTo be notified of incoming calls while you have a call in progress, select  Notify me.Voice Mail and Text MessagesWhen you insert the SIM card into your phone, it automatically detects and sets your voicemail and SMS servers by default. However, you can view the settings if you want.You can also view your voicemail numbers by tapping Voice Mail on the Speed Dial screen.Fixed DialingNetworkYou can select the network type, the manner of selecting networks and indicate when your phone is used in a Micro Cellular Network.
SETTINGSSETTINGSCurrent networkThe current network displays in the Current network field.Network selectionDefine how to choose between different available networks when travelling, for example.v  Manual: You can select the network yourself. Scroll to the desired network and tap OK .Tipv  Manual selection can be useful when you know that one network is less expensive than another or that it provides faster data transmission.v  Automatic: To have the network selected automatically.Preferred networkTap the Network tab > Set Networks (retrieving settings may take a few minutes). Select a network and re-priorities the order for network usage by tapping Move Up or Move Down.BandAutomatic, UMTS, GSM 900/1800, GSM 1900
Setting the time and dateTo set the time, tap Settings>System tab>Clock&Alarms>Time tab.  Select your location, hour, minutes, seconds to change the time setting.Tap the down arrow in the Date field to display a calendar and select the current date. When you are visiting, you can set the other date and time for the location with visiting.Setting alarmsTo set the alarms, Settings>System tab>Clock&Alarms>Alarms tab.  You can set up to 3 alarms. Tap Description and input a description and tap the day of the week you want.  You can also set the alarm sound.Sounds &  NotificationsTo set Sound & Notifications on actions1.  Tap Start > Settings > Personal tab > Sounds & Notifications.2.  On the Sounds tab, choose how you want to be notified by selecting the appropriate check boxes.3.  On the Notifications tab, in Event, tap an event name and choose how you want to be notified by selecting the appropriate check boxes. You can choose from several options, such as a special sound, a message, or a flashing light.SETTINGS
LockThere are two kinds of security on your device. You can protect your phone from unauthorized use by assigning a type of password called a PIN (personal identification number). Additionally, you can prevent unauthorized access to any part of the device by using password protection.Your first PIN will be given to you by your wireless service provider; you can change the PIN later.You create your own password when you begin using your device.To protect your phone with a PIN1.  From the Phone keypad, tap Menu> Settings > Lock tab.2. Tap Require PIN when phone is used.3.  To change the PIN at any time, tap Change PIN.Tipv  Emergency calls can be placed at any time, without requiring a PIN.To protect your device with a password You can help keep your data more secure by requiring a password every time the device is turned on.SETTINGSSETTINGS
1.  Tap Start > Settings > Personal tab > Lock.2.  Select the Prompt if device unused for check box, and in the box to the right, select how long your device must be turned off before a password is required. In the Password type box, select the type of password you would like to use. Enter the password and, if necessary, confirm the password. If your device is configured to connect to a network, use a strong password to help protect network security.3.  On the Hint tab, enter a phrase that will help you remember your password, but doesn’t allow others to guess your password. The hint will be displayed after the wrong password is entered four times.4.  Tap OK. The next time the device is turned on, you will be prompted to enter your password.Notev  Each time a wrong password is entered, the time the device takes to respond will get longer and longer until the device appears to be not responding.  If you forget your password, you must follow the instructions in your owner’s manual to clear memory before you can access your device.SETTINGS
To change your password1.  Tap Start > Settings > Personal tab > Lock. You will be prompted to enter your current password.2.  In the Password box, enter your new password.3.  On the Hint tab, enter a phrase that will help you remember your new password, but doesn’t allow others to guess your password. The hint will be displayed after the wrong password is entered four times.4. Tap OK.To display owner information on the Today screenHaving your contact information displayed on the Today screen on startup allows for easy identification of the device in case it is lost.1.  Tap Start > Settings > Personal tab > Owner Information.2.  On the Options tab, select the Identification information check box.3.  On the Options tab, select the Notes check box if you want additional text displayed, such as: Reward if found.4.  On the Notes tab, enter the additional text.Tipv  To display owner information on the Today screen, tap Start > Settings > Personal tab > Today. On the Items tab, select the Owner Info check box.SETTINGSSETTINGS
TodayToday screen settingsThe Today screen shows your upcoming appointments, active tasks, and information about e-mail messages. To synchronise the Today screen1.  Tap Start > Settings > Personal tab > Today.2.  On the Appearance tab, select the desired theme for the background of the Today screen.3.  On the Items tab, select the items you want to appear on the Today screen.Tipv  To change the order of items displayed on the Today screen, tap the item, and tap Move Up or Move Down.To add own background imageYou can use one of your own pictures as the background image on the Today screen. 1.  Tap Start > Settings > Personal tab > Today.2.  Select the Use this picture as the background check box, and tap Browse to view a list of your picture files.3.  Tap the file name of the picture you want to use.4. Tap OK.SETTINGS
To set options for displaying  appointments on the Today screenIf you have a large number of appointments, you may want to specify the kind of appointments that are displayed on the Today screen.1.  Tap Start > Settings > Personal tab > Today.2. Tap the Items tab.3. Select Calendar and tap Options.v  Select Next appointment to show only the next appointment in your schedule, or Upcoming appointments to show multiple appointments.v  Clear the Display all day events checked. To set options for displaying tasks on the Today screen If you have a large number of tasks, you may want to specify the kind of tasks that are displayed on the Today screen.1.  Tap Start > Settings > Personal tab > Today.2. Tap the Items tab.3. Select Tasks and tap Options.v  Select the type of tasks you want to appear on the Today screen.v  In the Category list, select whether to display only tasks assigned to a specific category or to display all tasks.SETTINGSSETTINGS
AlarmsTimeYou can view the time, day of the week and date.From the Start menu, tap Settings > System tab > Clock & Alarms > Time tab.Tap the hour, minutes, or seconds, then tap the up or down arrow to change the time setting. Tap the down arrow in the Date field to display a calendar.Tap a day on the calendar to select the current date.You can tap the left or right arrow at the top of the calendar to move backward or forward through the calendar.AlarmTap the Start menu, tap Settings > System tab > Clock & Alarms > Alarms tab. Tap a check box on the left and set the weekday and the clock you want to activate alarm. SETTINGS
Tap <Description> and enter a description of the alarm, and tap the day(s) of the week you want.Tap to set the alarm options, such as Play sound and Display message, and tap the time field to set the time for the alarm to sound. MoreDisplay the clock on the title bar in all programs.MemoryYou may need to stop a program if it becomes unstable or the program memory is low.SETTINGSSETTINGS
MainYou can to see how much memory is available.v  Tap Start > Settings > System tab > Memory > Main .On the Main tab, the amount of memory allocated to file and data storage versus program storage is displayed, as well as the amount of memory in use versus the available memory.Storage cardYou can see how much memory is available on a storage card that is inserted in your device.1.  Tap Start > Settings > System tab > Memory > Storage Card.2.  Tap the Storage Card tab.Tipv  If you have previously inserted more than one storage card, tap the list box and then the storage card whose information you want to see.Running ProgramsIn most cases, programs automatically close to free needed memory, however, you can close programs manually, if you prefer.1.  Tap Start > Settings > System tab > Memory > Running Programs tab.2.  In the Running Programs list, tap the program you want to close, and tap Stop.SETTINGS
PowerBatteryYour device contains a rechargeable Li-ion polymer battery. Your device is designed to use only manufacturer-specified original batteries and accessories. You can check the remaining amount of battery power.To check the battery powerv  Tap the battery level icon ( ) on the Today screen.v  Tap Start > Settings > System tab > Power.You can set whether or not the phone let switch the suspend mode after the specific period of time when the phone is inactive and the main battery is being used as the power source, or when connected to an external power.Advancedv  On battery power: Turn off device if not used for 1, 2, 3, 4, 5 minutes.v  On external power: Turn off device if not used for 1, 2, 5, 10, 15, 30 minutes.SETTINGSSETTINGS
Using the backlightYou can reduce the power consumption by turning off the backlight of the screen and button.  Pressing shortly will let you switch between suspend and resume mode. On suspend mode, the backlight will be completly turned off.Notev  Pushing and releasing the power key will force your phone in suspend or resume state.You can adjust the lighting time and the brightness for the backlight.To adjust the backlight setting:1. From the Start menu, tap Settings.2.  In the System tab, tap Backlight. In the Battery Power tab, set whether or not the phone turns off the backlight automatically, if not used for the specified period of time.SETTINGS
In the External Power tab, set whether or not the phone turns off the backlight automatically, if not used for the specified period of time, when connected to an external power.In the Brightness tab, select the brightness level.In the button tab, set whether or not the button backlight turns off automatically, if not used for the specified period of time. BluetoothTo set the bluetooth  configurationTap Start>Settings>Connections tab>BluetoothBluetooth enables compatible mobile devices, peripherals and computers that are in close proximity to communicate directly with each other without wires. This handset supports built-in Bluetooth connectivity, which makes it possible to connect them with compatible Bluetooth headsets, computer applications and so on.SETTINGSSETTINGS
Notev  If you use a pcsync via Bluetooth, you can exchange the data within only the phonebook.v  When you receive data from another Bluetooth device, the phone requests a confirmation. After confirming the transfer, the file will be copied in your phone.v  You can set the shared folder by Bluetooth settings->services->File Transfer->advanced.Generalv  Current profile: You can save the different bluetooth settings with different profile name.v  Bluetooth status: Bluetooth Turn On/Off.AccessibilityDevice Identificationv  Name: The name displays on remote device while pairing process.v  Address: The bluetooth address is displayed.  Accessibilityv  Allow other devices to connect All devices/paired devices only: You can select if other device can pair with yours or not. All devices means the remote device can pair with yours if authentication/authorization succeed. Paired devices only means remote device can discover but can not access any service discovery.SETTINGS
v  Other devices can discover me: If you don't want other device can search your device, then uncheck it.ServicesYou can set the configuration of each bluetooth profile(FTP, vCard exchange, Serial port, PAN, Hands-free, Phone-Book Access server, Dial-up Networking Server, PIM sync)Bluetooth modesBluetooth on your device operates in three different modes:v  On: Bluetooth is turned on and you can use Bluetooth features.v  Off: Bluetooth is turned off. In this mode, you can neither send nor receive information using Bluetooth. You might want to turn the radio off at times in order to conserve battery power, or in situations where radio use is prohibited, such as onboard an aircraft and in hospitals.v  Discoverable: Bluetooth is turned on, and all other Bluetoothenabled devices within a range of 10 meters can detect your device.Notev  By default, Bluetooth is turned off. If you turn it on, then turn off your device, Bluetooth also turns off. When you turn on your device again, Bluetooth automatically turns on.SETTINGSSETTINGS
To make your device discoverable1.  On your device, tap Start > Settings > Connections tab > Bluetooth.2.  Select the Turn on Bluetooth and Make this device discoverable to other devices check boxes.3. Tap OK.Notev  Selecting the Make this device discoverable to other devices check box also turns on Bluetooth.Bluetooth partnershipsA Bluetooth partnership is a relationship that you create between your device and another Bluetooth-enabled device in order to exchange information in a secure manner. Creating a partnership between two devices involves entering the same personal identification number (PIN) or Passkey on both devices. Creating a partnership between two devices is a one-time process. Once a partnership is created, the devices can recognize the partnership and exchange information without entering a PIN again. Make sure the two devices are within a range of 10 meters from one another, and Bluetooth is turned on and in discoverable mode.SETTINGS
To create a Bluetooth partnership1.  On your device, tap Start > Settings > Connections tab > Bluetooth.2. Tab the Bluetooth Manager->New3.  There are Bluetooth Applications and you can select one which you want to use.To accept a Bluetooth  partnership1.  Ensure that Bluetooth is turned on and in discoverable mode.2.  Tap Yes when prompted to establish a partnership with the other device.3.  Enter a passkey (the same passkey that is entered on the device requesting the partnership) to establish a secure connection. The passkey must be between 1 and 16 characters.4. Tap Next.5.  Tap Finish. You can now exchange information with the other device.Notev  If you tap start>Help in bluetooth settings window, you can use the Help to see the details of Bluetooth profiles.SETTINGSSETTINGS
USB to PC You can select the USB connection to the desktop PC. USB Active Sync or USB mass storage.To use the USB mass storage1.  Tap Start>Settings>Connections>USB to PC.2. Select the USB mass storage.3. Tap OKConnectionsYour device is equipped with powerful networking functions that enable you to connect to the Internet through a HSDPA(High Speed Downlink Packet Access), EDGE(Enhanced Data rates for Global Evolution), GPRS (General Packet Radio Service) network or a Bluetooth modem or a WLANnetwork. You can set up connections to the Internet or to a corporate network to browse the Internet, and exchange e-mail or instant messages.SETTINGS
Notev  Your phone is already set with the appropriate item to connect internet by default. So maybe you don’t need to change these connection settings.To connect to the Internet via pre-configured connections.1.  Tap Start > Settings > Connections tab  > Connections > Advanced tab.2. Tap Select Networks.3.  In the Programs that automatically connect to the Internet should connect using list, select the appropriate item.4. Tab OK.5.  To complete the connection wizard, tab OK.SETTINGSSETTINGS
To connect to the Internet via My ISP1.  Obtain the following information from your ISP:v  ISP server phone numberv  User namev  Passwordv  Access point name (required for GPRS connection)2.  Tap Start > Settings > Connections tab > Connections.3. Tap Add a new modem connection.4. Enter a name for the connection.5.  Select a modem from the list. For example, if you want to use the packet service network, select Cellular Line(GPRS,3G,HSDPA).6. Tap Next.7.  Complete the connection wizard by entering the required information and tap Finish.8.  Tab Advanced tab > Select Networks.9.  In the Programs that automatically connect to a private network should connect using list, select the My ISP and tab OK. SETTINGS
Notev  To view additional information for any screen, tap Help. To modify your connection settings, tap Manage existing connections on the Connections screen, and complete the connection wizard.v  If there are 2 or more connections in the My ISP, then Auto pick is selected automatically. If you want to change from Auto pick to the preferred connection, tab Manage existing connections of My ISP and select preferred connection and tab OK.To reset or modify the network card settings on your device1.  Tap Start > Settings > Connections tab > Wi- Fi.2. Select the Network Adapters tab.3.  In the My network card connects to list, Tap an adapter to modify settings:SETTINGSSETTINGS
v  If you want to connect to the Internet using your ISP or WLAN to browse web page with Internet Explorer, select the Internet.v  If you want to connect to a private network and browse the shared folder on the network with File Explorer, select Work.4.  In the Tap an adapter to modify settings field, select the appropriate adapter.5.  When you select a network card and enter the settings screen, you have to configure the required settings. On the IP Address tab, select Use specific IP address and enter the requested information. Contact your ISP or network administrator to obtain the IP address, Subnet mask, and Default gateway.6.  On the Name Servers tab, configure the DNS and WINS settings. Servers that require an assigned IP address may also require a way to map computer names to IP addresses. DNS and WINS are the resolution options supported on your device.Notev  To connect to the Internet using WLAN, ‘My ISP’ must exist in the connection settings.SETTINGS
Wireless ManagerWireless Manager allows you to manage Wi-Fi Internet and Bluetooth connections on your device. It allows the phone to connect local wireless networks, or access the Internet wirelessly. Wi- Fi is faster and has a greater range than Bluetooth wireless technology. v  Tap Wireless Manager in Today screen or Start>Settings> Connections>Wireless Manager.v  To turn on Wi-Fi, tap Wi-Fi in the Wireless Manager.SETTINGSSETTINGS
A bubble window pops up and shows scanned appropriate  Access Points near users. v  You can select the Access Point that you are permitted to access and tap OK.v  Then select The Internet to have an Internet service and tap Connect. NoteIf your Wi-Fi service provider or network administrator sets WEP encryption for network security, you should fill in WEP key in the pop-up window. If WEP encryption is not set, this pop-up window is not shown.If you don’t know the key, you need to ask it to your Wi-Fi service provider or network administrator. If  Wi-Fi connection is finished, you can see the connection name (SSID) in the  Wireless Manager.To  turn  off Wi-Fi,  tap Wi-Fi  in  the Wireless Manager again.SETTINGS
Configuring Wi-Fi connection settingsNoteBefore you set the WLAN configuration, you need to ask your WLAN service provider or your network administrator for the IP settings.v  Tap Start>Settings>Connections >Tap Wi-Fi>Network Adaptors Tap Samsung 2700S WiFi Adaptors v  If you tap Use server-assigned IP address, you can get IP settings assigned automatically.SETTINGSSETTINGS
v  If you tap Use specific IP address, you need to set IP address assigned by your WLAN service provider or network administrator.v  Fill in IP address, Subnet mask, and Default gateway.v  Tap Name Servers. v  Fill in DNS and Alt DNS, WINS and Alt WINS, if necessary. NoteTo prevent from the possible data loss of your phone, all of the wireless services such as phone, WLAN and Bluetooth automatically end when the battery almost runs out at the level of below two percent.SETTINGS151
ACCESSORIESACCESSORIESThere are various accessories for your mobile phone. You can select these options according to your personal communication requirements.Travel AdapterThis charger allows you to charge the battery while away from home or your office.Standard  BatteryData cable/CDYou can connect your phone to PC to exchange the data between them.Hands free earmicrophone.v  Stereo headsetNotev  Always use genuine LG accessories.v  Failure to do so may invalidate your warranty.v  Accessories  may  vary  in  different regions:  please  check  with  our regional service company or agent for further information.

Navigation menu