LG Electronics USA CU400 Dual-Band Dual-Mode GSM/EDGE/WCDMA Phone with BT User Manual CU400 ENG 0726 2
LG Electronics USA Dual-Band Dual-Mode GSM/EDGE/WCDMA Phone with BT CU400 ENG 0726 2
UserManual.wiki
>
LG Electronics USA
>
CU400 User Manual
>
Users Manual
Contents
1.
Users Manual
2.
Users Manual Insert
Users Manual
Navigation menu
Upload a User Manual
Namespaces
Wiki Guide
HTML
PDF
Info
Views
User Manual
Discussion / Help
Navigation
![7For Your SafetyImportant InformationThis user guide contains important information on theuse and operation of this phone. Please read all theinformation carefully for optimal performance and toprevent any damage to or misuse of the phone. Anychanges or modifications not expressly approved inthis user guide could void your warranty for thisequipment.Before You StartSafety InstructionsWARNING! To reduce the possibility of electric shock,do not expose your phone to high humidity areas, suchas the bathroom, swimming pool, etc.Always store your phone away from heat. Never storeyour phone in settings that may expose it totemperatures less than 32°F or greater than 104°F,such as outside during extreme weather conditions orin your car on a hot day. Exposure to excessive cold orheat will result in malfunction, damage and/orcatastrophic failure.Be careful when using your phone near otherelectronic devices. RF emissions from your mobilephone may affect nearby in adequately shieldedelectronic equipment. You should consult withmanufacturers of any personal medical devices suchas pacemakers and hearing aides to determine if theyare susceptible to interference from your mobilephone. Turn off your phone in a medical facility or at agas station. Never place your phone in a microwaveoven as this will cause the battery to explode.IMPORTANT! Please read the TIA SAFETYINFORMATION on page 82 before using your phone.Safety InformationRead these simple guidelines. Breaking the rules may bedangerous or illegal. Further detailed information is givenin this user guide.]Never use an unapproved battery since this coulddamage the phone and/or battery and could causethe battery to explode.]Never place your phone in a microwave oven as itwill cause the battery to explode.]Do not dispose of your battery by fire or withhazardous or flammable materials.](https://usermanual.wiki/LG-Electronics-USA/CU400.Users-Manual/User-Guide-691791-Page-7.png)
![8For Your Safety]Make sure that no sharp-edged items come intocontact with the battery. There is a risk of thiscausing a fire.]Store the battery in a place out of reach of children.]Be careful that children do not swallow any partssuch as rubber plugs (earphone, connection parts ofthe phone, etc.). This could cause asphyxiation orsuffocation.]Unplug the power cord and charger during lightningstorms to avoid electric shock or fire.]When riding in a car, do not leave your phone or setup the hands-free kit near to the air bag. If wirelessequipment is improperly installed and the air bag isactivated, you may be seriously injured.]Do not use a hand-held phone while driving.]Do not use the phone in areas where its use isprohibited. (For example: aircraft).]Do not expose the battery charger or adapter todirect sunlight or use it in places with high humidity,such as a bathroom.]Never store your phone in temperatures less than-4°F or greater than 122°F.]Do not use harsh chemicals(such as alcohol,benzene, thinners, etc.) or detergents to clean yourphone. There is a risk of this causing a fire.]Do not drop, strike, or shake your phone severely.Such actions may harm the internal circuit boards ofthe phone.]Do not use your phone in high explosive areas asthe phone may generate sparks.]Do not damage the power cord by bending, twisting,pulling, or heating. Do not use the plug if it is looseas it may cause a fire or electric shock.]Do not place any heavy items on the power cord. Donot allow the power cord to be crimped as it maycause fire or electric shock.]Do not handle the phone with wet hands while it isbeing charged. It may cause an electric shock orseriously damage your phone.]Do not disassemble the phone.]Do not place or answer calls while charging thephone as it may short-circuit the phone and/orcause electric shock or fire.](https://usermanual.wiki/LG-Electronics-USA/CU400.Users-Manual/User-Guide-691791-Page-8.png)
![9For Your Safety]Only use the batteries, antennas, and chargersprovided by LG. The warranty will not be applied toproducts provided by other suppliers.]Only authorized personnel should service the phoneand its accessories. Faulty installation or servicemay result in accidents and consequently invalidatethe warranty.]Do not hold or let the antenna come in contact withyour body during a call.]An emergency call can be made only within aservice area. For an emergency call, make sure thatyou are within a service area and that the phone isturned on.]Use accessories, such as earphones and headsets,with caution. Ensure that cables are tucked awaysafely and do not touch the antenna unnecessarily.FCC RF Exposure InformationWARNING! Read this information before operating thephone.In August 1996, the Federal Communications (FCC) ofhe United States, with its action in Report and OrderFCC 96-326, adopted an updated safety standard forhuman exposure to radio frequency (RF)electromagnetic energy emitted by FCC regulatedtransmitters. Those guidelines are consistent with thesafety standard previously set by both U.S. andinternational standards bodies.The design of this phone complies with the FCCguidelines and these international standards.CAUTIONUse only the supplied and approved antenna. Use ofunauthorized antennas or modifications could impair callquality, damage the phone, void your warranty and/orresult in violation of FCC regulations. Do not use thephone with a damaged antenna. If a damaged antennacomes into contact with skin, a minor burn may result.Contact your local dealer for a replacement antenna.Body-worn OperationThis device was tested for typical body-wornoperations with the back of the phone kept 0.6 inches(1.5cm) between the user’s body and the back of thephone. To comply with FCC RF exposure requirements,a minimum separation distance of 0.6 inches(1.5cm)must be maintained between the user s body and theback of the phone. Third-party belt-clips, holsters, andsimilar accessories containing metallic components](https://usermanual.wiki/LG-Electronics-USA/CU400.Users-Manual/User-Guide-691791-Page-9.png)
![10For Your Safetyshould not be used. Body-worn accessories thatcannot maintain 0.6 inches(1.5cm) separation distancebetween the user's body and the back of the phone,and have not been tested for typical body-wornoperations may not comply with FCC RF exposure limitsand should be avoided.Vehicle Mounted External Antenna(optional, if available)A minimum separation distance of 8 inches (20cm)must be maintained between the user/bystander andthe vehicle mounted external antenna to satisfy FCC RFexposure requirements. For more information about RFexposure, visit the FCC website at www.fcc.govFCC Part 15 Class B ComplianceThis device and its accessories comply with part 15 ofFCC rules. Operation is subject to the following twoconditions: (1) This device and its accessories may not causeharmful interference, and (2) this device and itsaccessories must accept any interference received,including interference that may cause undesiredoperation.Cautions for Battery]Do not disassemble.]Do not short-circuit.]Do not expose to high temperature: 60°C (140°F).]]Do not incinerate.Battery Disposal]Please dispose of your battery properly or bring toyour local wireless carrier for recycling.]Do not dispose in fire or with hazardous orflammable materials.Adapter (Charger) Cautions]Using the wrong battery charger could damage yourphone and void your warranty.]The adapter or battery charger is intended forindoor use only.Do not expose the adapter or battery charger to directsunlight or use it in places with high humidity, such asthe bathroom.](https://usermanual.wiki/LG-Electronics-USA/CU400.Users-Manual/User-Guide-691791-Page-10.png)
![11For Your SafetyAvoid damage to your hearing]Damage to your hearing can occur if you areexposed to loud sound for long periods of time. Wetherefore recommend that you do not turn on or offthe handset close to your ear. We also recommendthat music and call volumes are set to a reasonablelevel.]If you are listening to music whilst out and about,please ensure that the volume is at a reasonablelevel so that you are aware of your surroundings.This is particularly imperative when attempting tocross the street.Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that intereference will not occur in a particular installation. If th eequpiment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and the receiver.- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.- Consult the dealer or an experienced radio/TV technician for help and for additional suggestions.The user might find the following booklet prepared by the Federal Communications Commission helpful : "How to Identify and Resolve Radio-TV Interference Problems."This booklet is available from the US Government Printing Office, Washington, D.D. 20402, Stock No. 004-000-00345-4. FCC NoticeThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept anyinterference received, including interference that may cause undesired operation.Changes or modifications not expressly approved by the party responsible for compliance could voidthe user's authority to operate the equipment.](https://usermanual.wiki/LG-Electronics-USA/CU400.Users-Manual/User-Guide-691791-Page-11.png)
![17Getting StartedInstalling the SmartChipWhen you subscribe to a cellular network, you areprovided with a plug-in SmartChip loaded with yoursubscription details, such as your PIN, any optionalservices available and many others.nImportant!The plug-in SmartChip and its contacts can be easilydamaged by scratches or bending, so be careful whenhandling, inserting or removing the card. Keep allSmartChips out of the reach of small children.1. If necessary, switch off the phone by holding downthe [END] key until the power-off imageappears.2. Remove the battery. To do so:3. Slide the SmartChip into the SmartChip socket sothat it locks the card into place. Make sure that thenotched corner is at the top left and the goldcontacts of the card face into the phone.nNoteWhen you need to remove the SmartChip, slide it, as shown,and take it out of the socket.](https://usermanual.wiki/LG-Electronics-USA/CU400.Users-Manual/User-Guide-691791-Page-17.png)
![19Getting StartednNote]If your phone is powered on while charging, you’ll see thebars on the battery indicator icon cycle.When the battery is fully charged, the bars on the batteryindicator icon will flash on and off.If the battery fails to charge completely:]After turning the phone on and off, please attempt torecharge the battery.]After detaching and reattaching the battery, pleaseattempt to recharge the battery.Turning Your Phone On and Off1. Hold down the [END] key until the phoneswitches on.2. If the phone asks for a PIN, enter the PIN and pressthe key.The phone searches for your network and after findingit goes to the idle screen as illustrated below. From theidle screen, you can make or receive a call.nNoteThe display language is preset to Automatic at the factory.To change the language, use the Language menu option(Menu 9.2.5).3. When you wish to switch the phone off, hold down the[END] key until the power-off image displays.Access CodesYou can use the access codes described in thissection to avoid unauthorized use of your phone. Theaccess codes can be changed by using the ChangeCodes feature (Menu 9.6.4).Security code (4 digits)The security code protects the unauthorized use ofyour phone. The default security code is set to ‘0000’](https://usermanual.wiki/LG-Electronics-USA/CU400.Users-Manual/User-Guide-691791-Page-19.png)
![21General FunctionsMaking a Call1. Make sure your phone is powered on.2. Enter a phone number including the area code. Toedit a number on the display screen, simply pressthe key to erase one digit at a time.] Press and hold the key to erase the entirenumber.3. Press the [SEND] key to call the number.4. When finished, press the [END] key.Making a Call by Send Key1. Press the [SEND] key, and the most recentincoming, outgoing and missed phone numbers willbe displayed.2. Select the desired number by using the navigationkey.3. Press the [SEND] key.Making International Calls1. Press and hold the key and the internationalaccess character ‘+’ will appear.2. Enter the country code, area code, and the phonenumber.3. Press the [SEND] key.Ending a CallWhen you have finished a call, press the [END]key.Making a Call From the ContactsYou can store names and phone numbers dialedfrequently in the SmartChip as well as in the phonememory known as the Contacts.You can dial a number by simply selecting a name inthe contacts and pressing the [SEND] key.](https://usermanual.wiki/LG-Electronics-USA/CU400.Users-Manual/User-Guide-691791-Page-21.png)
![22General FunctionsAdjusting the VolumeDuring a call, if you want to adjust the earpiecevolume, use the side keys of the phone.In idle mode, you can adjust the ring volume using theside keys.Answering a CallWhen you receive a call, the phone rings and theflashing phone icon appears on the screen. If thecaller can be identified, the caller’s phone number (orname if stored in your Address Book) is displayed.1. Open the flip and press the [SEND] key or theleft soft key to answer an incoming call. If Any Keyhas been set as the answer mode (Menu 9.5.4), anykey press will answer a call except for the[END] key or the right soft key.nNote] To reject an incoming call, press and hold the side keyson the left side of the phone.] If Flip Open has been set as the Answer Mode (Menu9.5.4), you do not need to press any key. You can answerthe call simply by opening the flip.2. End the call by closing the phone or pressing the[END] key.nNoticeYou can answer a call while using the Address Book or othermenu features.Vibrate Mode (Quick)Vibrate Mode can be activated by pressing andholding down the [Star] key.Signal StrengthIf you are inside a building, being near a window maygive you better reception. You can see the strength ofyour signal by the signal indicator on your phone’sdisplay screen.Entering TextYou can enter alphanumeric characters by using thephone’s keypad. For example, storing names in theAddress Book, writing a message, or creating schedulingevents in the calendar all require entering text.The following text input methods are available on thephone.](https://usermanual.wiki/LG-Electronics-USA/CU400.Users-Manual/User-Guide-691791-Page-22.png)
![23General FunctionsT9 ModeThis mode allows you to enter words with only onekeystroke per letter. Each key on the keypad has morethan one letter. The T9 mode automatically comparesyour keystrokes with an internal linguistic dictionary todetermine the correct word, thus requiring far fewerkeystrokes than the traditional ABC mode.ABC ModeThis mode allows you to enter letters by pressing thekey labeled with the required letter once, twice, threeor four times until the letter is displayed.123 Mode (Numbers Mode)Type numbers using one keystroke per number. To change to 123 mode in a text entry field, press key until 123 mode is displayed.A long press changes the mode to 123.Symbol ModeThis mode allows you to enter special characters.nNoteYou can select a different T9 language from the menu option.The default setting on the phone is T9 disabled mode.Changing the Text Input ModeChange the text input mode by pressing . You cancheck the current text input mode in the upper rightcorner of the screen.Using the T9 ModeThe T9 predictive text input mode allows you to enterwords easily with a minimum number of key presses. Asyou press each key, the phone begins to display thecharacters that it thinks you are typing based on a built-indictionary. As new letters are added, the word changesto reflect the most likely candidate from the dictionary.1. When you are in the T9 predictive text input mode,start entering a word by pressing keys toPress one key per letter.]The word changes as letters are typed - ignorewhat’s on the screen until the word is typedcompletely.]If the word is still incorrect after typing completely,press the [Star] key once or more to cyclethrough the other word options.]If the desired word is missing from the wordchoices list, add it by using the ABC mode.](https://usermanual.wiki/LG-Electronics-USA/CU400.Users-Manual/User-Guide-691791-Page-23.png)
![24General Functions2. Enter the whole word before editing or deleting anykeystrokes.3. Complete each word with a space by pressing thekey or the right navigation key.To delete letters, press . Press and hold downto erase the letters continuously.nNoticeTo exit the text input mode without saving your input, press the[END] key.Using the ABC ModeUse the keypad keys to enter your text.1. Press the key labeled with the required letter:] Once for the first letter] Twice for the second letter] And so on2. To insert a space, press the key once. Todelete letters, press the key. Press and holddown the key to erase the letters continuously.nNoteRefer to the table below for more information on thecharacters available using the keys.Key Characters in the Order DisplayUpper Case Lower Case1 . , ' @ ? ! - : / 1 . , ' @ ? ! - : / 12 A B C 2 a b c 23 D E F 3 d e f 34 G H I 4 g h i 45 J K L 5 j k l 56 M N O 6 m n o 67 P Q R S 7 p q r s 78 T U V 8 t u v 89 W X Y Z 9 w x y z 90 Space Key, 0 (Long press) Space Key, 0 (Long press)](https://usermanual.wiki/LG-Electronics-USA/CU400.Users-Manual/User-Guide-691791-Page-24.png)
![25General FunctionsUsing the 123 (Numbers) ModeThe 123 Mode enables you to enter numbers in a textmessage (a telephone number, for example) morequickly.Press the keys corresponding to the required digitsbefore manually switching back to the appropriate textentry mode.Using the Symbol ModeThe Symbol Mode enables you to enter varioussymbols or special characters.To enter a symbol, press the [Star] key. Use thenavigation keys to select the desired symbol and pressthe [OK] key.T9 dictionaryThe T9 dictionary is a feature that allows the user toadd any unique or personal words to the T9 standardlanguage database. The T9 dictionary function can beselected from the Text Entry Settings sub menu underthe Options soft key menu. Within the T9 dictionaryfunction, the user can add, modify, delete or resetpersonal words.](https://usermanual.wiki/LG-Electronics-USA/CU400.Users-Manual/User-Guide-691791-Page-25.png)
![27In-Call MenuYour phone provides a number of control functions thatyou can use during a call. To access these functionsduring a call, press the right soft key [Options].During a CallThe menu displayed on the handset screen during acall is different from the default main menu displayedwhen in idle screen, and the options are describedbelow.Making a Second CallYou can select a number you wish to dial from theAddress Book to make a second call. Press the rightsoft key then select Contacts.Swapping Between Two CallsTo switch between two calls, press the right soft keyor the [SEND] key, and then select Swap.Answering an Incoming CallTo answer an incoming call when the handset isringing, simply press the [SEND] key. The handsetis also able to warn you of an incoming call while youare already on a call. A tone sounds in the earpiece,and the display will show that a second call is waiting.This feature, known as Call Waiting, is only available ifyour network supports it.If Call Waiting is on, you can put the first call on holdand answer the second call, by pressing the [SEND] key.Rejecting an Incoming CallYou can reject an incoming call without answering bysimply pressing the [END] key.During a call, you can reject an incoming call bypressing the [END] key.](https://usermanual.wiki/LG-Electronics-USA/CU400.Users-Manual/User-Guide-691791-Page-27.png)
![28In-Call MenuMuting the MicrophoneYou can mute the microphone during a call by pressingthe left soft key [Mute]. The handset can be unmutedby pressing the left soft key [Unmute]. When thehandset is muted, the caller cannot hear you, but youcan still hear the caller.Using the SpeakerphoneYou can use the integrated Speakerphone during a callby pressing the key. The loudspeaker isautomatically deactivated when you end the call.nWarningDue to higher volume levels, don’t place the phone near yourear while the speakerphone is enabled.Conference CallsThe conference service provides you with the ability tohave a simultaneous conversation with more than onecaller. The conference call feature can be used only ifyour network service provider supports this feature. Aconference call can only be set up when you have onecall active and one call on hold, meaning both callsmust have been answered. Once a conference call isset up, calls may be added, disconnected or separated(that is, removed from the conference call but stillconnected to you) by the person who set up theconference call. These options are all available fromthe In-Call menu. The maximum number of callers in aconference call is five. Once started, you are in controlof the conference call, and only you can add calls tothe conference call.](https://usermanual.wiki/LG-Electronics-USA/CU400.Users-Manual/User-Guide-691791-Page-28.png)
![29In-Call MenuMaking a Second CallYou can make a second call while currently on a callsimply by entering the second number and pressingthe [SEND] key. When the second call isconnected, the first call is automatically placed onhold. You can swap between calls, by pressing the[SEND] key.Setting Up a Conference CallTo set up a conference call, place one call on hold,conference in the second active call by pressing theright soft key and select the Join Calls sub menu optionfrom the Conference Call menu. Activate the Conference Call on HoldTo activate a conference call on hold, press the [SEND] key.Adding Calls to the Conference CallTo add a call to an existing conference call, press theright soft key, and then select the Join Calls sub menufrom the Conference Call option.Private Call in a Conference CallTo have a private call with one caller from aconference call, press the right soft key and select thePrivate Menu from the Conference Call option. Whenthe numbers of the callers are displayed, select theone you wish to speak in private. Ending a Conference CallCurrently active conference call can be disconnectedby pressing the [END] key.](https://usermanual.wiki/LG-Electronics-USA/CU400.Users-Manual/User-Guide-691791-Page-29.png)
![30Menu TreeThe following illustration shows the available menu structure and indicates the:]Number assigned to each menu option.]Page where you can find the feature description.1. Push to Talk (PTT) (see page 34)1.1 PTT Contacts1.2 Add Contact1.3 Add Group1.4 PTT Settings1.5 Pending Invitations2. Messaging (see page 42)2.1 New Message2.2 Inbox2.3 IM2.4 Mobile Email2.5 Drafts2.6 Outbox2.7 Sent2.8 Voicemail2. Messaging (continued)2.9 Templates2.9.1 Text Templates2.9.2 Multimedia Templates2.9.3 Signature2.0 Message Settings2.0.1 Text Message2.0.2 Multimedia Message2.0.3 Voicemail2.0.4 Download Messages3. Recent Calls (see page 53)3.1 Missed Calls3.2 Dialed Calls3.3 Received Calls3.4 All Calls3.5 Call Duration3.6 Data Counter3.6.1 Data Time3.6.2 Data Volume](https://usermanual.wiki/LG-Electronics-USA/CU400.Users-Manual/User-Guide-691791-Page-30.png)
![34Push to Talk (PTT)Welcome to PTTPush to Talk (PTT) from Cingular let's you see whetheryour family, friends, and co-workers are available totalk before you call. You can reach them individually orall at once via a group call, all in an instant. Read on tohear about all of the features Cingular Push to Talk hasto offer.Initialize your PTT ServiceBegin initializing your PTT service by pressing the PTTKey (gray button on left side of phone) or by enteringPush to Talk(6) from the Main Menu. You will then register your name and, onceinitialization completes, begin adding your family,friends, and co-workers who are also Cingular PTTsubscribers.PTT TipsPTT is a great way of communicating instantly with thepeople who are important to you. Here are a few tips tohelp you.1. Make sure you are holding the PTT Key down whileyou talk.2. Make sure you don't start talking until AFTER youhear the tone. 3. Note the location of the speakerphone andmicrophone to make sure you aren't covering eitherwith your grip.4. PTT calls can be easily started with the flip closed.During a PTT call with the flip open and speaker OFF,the call will be terminated when the flip is closed.When the speaker is ON, closing the flip will notterminate the call.5. Turn the volume up high to more clearly hear yourPTT calls.Icon Descriptions]My Availability: Your availability icon appears nextto the signal indicator on your idle screen. This iconindicates the availability others will see for youwhen you are listed in their PTT Contacts.AvailableThis will be your availability state once you initializeservice and it will not change unless you change it asnoted below.](https://usermanual.wiki/LG-Electronics-USA/CU400.Users-Manual/User-Guide-691791-Page-34.png)
![35Push to Talk (PTT)UnavailableThis becomes your availability state if you power offyour phone, turn PTT Off, or if the system detects youhave moved out of coverage.Do Not DisturbThis becomes your availability state if you change MyAvailability (Menu 6.4.1) to Do Not Disturb. In this stateyou may place PTT calls but will not receive a PTT call.PTT MessageThis icon appears in place of your availability statusnotifying you that a PTT message is waiting. To accessthese messages go to Push to Talk (6) on the MainMenu. The message will either immediately display ormay be found under Pending Invitations (5).]PTT Contact Availability: This section covers theicons which will appear next to individuals andgroups in your PTT Contacts list indicating theiravailability.• INDIVIDUALS:AvailableThis contact is available to talk.UnavailableThis contact has turned PTT Off, powered down theirphone, or moved out of coverage.Do Not DisturbThis contact is not receiving PTT calls.Silent/VibrateThis contact is available to receive PTT calls. Howeverthey will be given the option to accept or reject yourPTT call.Invitation in ProgressYou are waiting for this contact to accept yourinvitation.• GROUPS:AvailableAt least one member of the group is available to talk.UnavailableEvery member has powered down their phone, turnedPTT Off, or moved out of coverage.Do Not DisturbNone of the members of the group can be contacted.](https://usermanual.wiki/LG-Electronics-USA/CU400.Users-Manual/User-Guide-691791-Page-35.png)
![38Push to Talk (PTT)The PTT KeyThe gray key on the left hand side of the phone is yourPTT Key.• Pressing and releasing this key while idle displaysyour PTT contacts.• Pressing and holding this key while idle displaysyour PTT history.• Pressing and holding this key while in a PTT callallows you to speak to the other call participants.To make a call press and release your PTT key todisplay your contacts. Select the person or group youwish to connect with and Press and Hold the PTT Key.nNoteCustomers should not initiate or participate in a PTT callwhilst driving. The current version of our PTT productrequires you to press the button while talking. For thisreason we advise against using PTT while driving, includingwith a car kit or personal handsfree kit.PTT Contacts Menu 1.1When accessing your PTT Contacts, Options displayson your Right Soft Key. Options may change dependingon whether an individual or a group was highlightedwhen you selected Options.• INDIVIDUALS:]Call Me Alert: This option allows you to send amessage to an individual in your PTT Contactswhose status is Available, Silent/Vibrate, or Do NotDisturb. First select the individual, select Options,and then select Call Me Alert. A message will displayon their idle screen "Please Call" and your name.They can simply press their PTT Key to call you back.]Quick Group Call: This option allows you to make agroup call without pre-establishing it in your PTTContacts. After selecting this menu item from PTTContacts, Options, a list of available individuals willpresent. Select those you wish to include in yourcall (up to 6). Then press the PTT Key to begin yourQuick Group call.](https://usermanual.wiki/LG-Electronics-USA/CU400.Users-Manual/User-Guide-691791-Page-38.png)
![39Push to Talk (PTT)]Voice Message: This option allows you to leave avoicemail instantly. For a message to a contact,simply highlight the contact on your PTT Contacts,select Options, and select Voice Message. Pushingthe PTT Key begins the recording. Releasing the PTTKey ends the recording and deposits your message.]Add Contact: This option allows you to send aninvitation to the contact that the user has selected.After the person accepts the invitation, he or shewill be listed as an available PTT contact.]Rename: You can edit the name of the individual. ]Delete: You can delete the individual.]Copy to Address: This option allows you to copy thename and number to your Address Book.]New Message: You can send a new text ormultimedia message to selected member.• GROUPS:]View Members: This option displays all members ofa group along with their Availability.]Dynamic Call: It is similar to Quick Group Callhowever the participants you select from are onlythose participants in the group.]Voice Message: This option allows you to leave avoicemail to a group in your PTT Contacts or selectmembers from the group. Select the members ofVoice Message and press Ok once. Select the groupto receive the message. Pushing the PTT Key beginsthe recording. Releasing the PTT Key ends therecording and deposits your message.]Add Group: This option allows you to create a newPTT group.]Leave Group: If you have joined a group originatedby another this option allows you to leave the groupbut the group remains intact for all otherparticipants.]Add member: This option displays only when youhave highlighted a group which you have originated.After adding any additional members, a notificationis sent to the other group participants of the newgroup members.]Remove Member: This option displays only whenyou have highlighted a group which you haveoriginated. After removing a member a notificationis sent to the individual.](https://usermanual.wiki/LG-Electronics-USA/CU400.Users-Manual/User-Guide-691791-Page-39.png)
![40Push to Talk (PTT)]Rename: If you have joined a group originated byanother this option allows you to edit the name ofthe group.]New Message: You can send a new text message toall members of the selected group.]Delete Group: Deleting a group which youoriginated deletes the group from PTT Contacts forall participants.Add Contact Menu 1.21. Select Add Contact in the PTT menu.2. Enter the contact's name and phone number andthen select [Save]. An invitation to join your PTTContacts will be sent.3. The availability icon will be Invitation in Progressuntil the individual accepts.4. Once accepted they are part of your PTT Contactsand you are part of theirs.Add Group Menu 1.3Setting up a PTT group is a great way to quickly call agroup of people you routinely need to reach. A groupcan be made up of individuals in your PTT Contacts orother Cingular PTT subscribers you don't necessarilywant to add to your PTT Contacts.1. After selecting Add Group you will be asked to nameyour group.2. Next step is to choose members. Choosing Select InContacts lets you chose from your PTT Contacts.Choosing New Contact lets you add someone not inyour PTT Contacts.a. If you want to add both types of contacts then youwill need to select one option and save the group.b. Then using Add Member in the PTT ContactsOptions menu you can add the remainingmembers.3. Once you have saved your group invitations will besent to each contact for their acceptance. TheInvitation in Progress icon will display next to thegroup until one member accepts. Availability willthen update each time a person accepts.](https://usermanual.wiki/LG-Electronics-USA/CU400.Users-Manual/User-Guide-691791-Page-40.png)
![41Push to Talk (PTT)4. When a participant accepts your invitation the groupis now in their PTT Contacts and they may also placecalls to the group.5. Maximum members in a group is 30, 29 participantsand yourself. You may have up to 30 groups in yourPTT Contacts.PTT Settings Menu 1.4]My Availability: This option allows you to changeyour Availability status between Do Not Disturb andAvailable.]Contact Alerts: This feature allows you to be alertedwhen the availability status of a contact changesfrom Unavailable or Do Not Disturb to Available orSilent/Vibrate.1. Once Contact Alerts is selected a list of individualsfrom PTT Contacts will display. Select thoseindividuals for whom you want to receive alerts foravailability changes.2. Once selected you will receive alerts for availabilitychanges until you de-select them.3. An alert consists of a tone as well as a PTT messagewhen you access the PTT Menu.]Set Your Name: When you initialized service you seta name for yourself. This name is presented inContact Invitations. Changing your name will notimpact invitations already sent but will be reflectedin future invitations.]Auto Accept Invites: If you do not want to pre-screen all additions to your PTT Contacts you canuse this menu item to automatically accept yourinvitations.• Disable All allows you to pre-screen all invitations.• Contact Only automatically accepts individualinvitations.• Group Only automatically accepts groupinvitations.• Enable All automatically accepts all invitations.]PTT is On/PTT is Off: This menu item allows you toturn your PTT Service off or turn it on.Pending Invitations Menu 1.4This menu item only displays if you have invitationswhich have been waiting for your review. Selectingthis menu item displays a list of invitations pending.Invitations not disposed of within 7 days will expire.](https://usermanual.wiki/LG-Electronics-USA/CU400.Users-Manual/User-Guide-691791-Page-41.png)
![42MessagingThis menu includes functions related to SMS (ShortMessage Service), MMS (Multimedia Message Service),voice mail, as well as the network’s service messages.New Message Menu 2.1nNoteIf you select a graphic or an audio file while writing amultimedia message, the file loading time will take about 5seconds. You will not be able to activate any key during thefile loading time. When the file loading is complete, you willbe able to write a multimedia message. Editing a messageThe following options are available for Editing aMessage. (Press the left soft key [Insert])]Symbol: You can insert symbols ranging fromsentence notes to emoticons. Select the one youwant by navigating the left/right soft keys[Previous/Next].]Graphic: You can select a graphic image by usingthe left/right navigation keys. You can preview theselected picture by pressing the left soft key [View].]Audio: You can insert various ringtones.nNotevCard, vCalendar, vNote and vTask are created by AddressBook, Calendar, Notepad and Tasks respectively. Go to theTools and Address Book sections for more detailed information.]Video: You can insert a video clip by using thecenter key [Insert].]New Photo: You can insert a new image taken fromthe camera by pressing [Capture]. The followingcamera options are available when you press[Options]: zResolution: The resolution of the image can becaptured in 1280*960/640*480/320*240/160*120zQuality: The quality of the captured image can beSuper Fine/Fine/NormalzReverse View: You can view the photo upsidedownzView Full Image: Extends the photo screen to full.zSelf Timer: Camera timer can be set to Off/3 Seconds/5 Seconds/10 SecondszAdvanced Settings: Set the White Balance asAuto/Daylight/Incandescent/Cloudy/Fluorescent/Night mode. Color Effects includes options such](https://usermanual.wiki/LG-Electronics-USA/CU400.Users-Manual/User-Guide-691791-Page-42.png)
![43Messagingas Color/ Sepia/ Mono/Negative. Shutter Tonescan be set to Tone 1/ Tone 2/ Tone 3/ Off.zDefault Settings: Allows you to set to the defaultsettings.]New Audio: You can record a new audio bypressing the center key [Record]. After recording anew audio, you can cancel it by pressing the rightkey [Cancel]. To control the new audio menu,choose [Options] by pressing the right key. Under[Options], choose one of followingzRecord Mode: Set as MMS or General Mode.zQuality: Set the audio’s quality to Fine, Normal orEconomy.]New Video: You can record new video by pressingthe center key [Record].]Subject: Type a subject into the message.]Others: Allows you to insert vCard, vCalendar, vNoteor vTask.]Template- Text: You can easily insert the frequently usedsentences in the text message.- Multimedia: The preset multimedia templates areavailable.- Signature: Input your own signature created in(Menu 2.8.3). For further details, see page 46.]Contact: You can browse one of your contacts andinsert it.]Slide: You can insert a slide and place it to InsertSlide Before or Insert Slide After.Using OptionsPress right soft key [Options].zPreview: Shows the created multimedia messagebefore sending it.(Only for Multimedia Message)zRemove: Removes the selected multimedia orvObject.(Only for Multimedia Message)zSave to Drafts: Saves the selected message to draft.zSelect Slide: If the message has more than oneslide, you can select and move to the desiredslide.(Only for Multimedia Message)zSet Slide: Sets the Duration, Text color andbackground color of the selected slide.(Only forMultimedia Message)zText Entry Mode: Sets the text input mode. For moredetails, refer to Entering Text (page 22).](https://usermanual.wiki/LG-Electronics-USA/CU400.Users-Manual/User-Guide-691791-Page-43.png)
![44MessagingzText Entry Settings: Text Entry Languages allowsyou to set the text entry language to English,Spanish or French. T9 Next Word Prediction isavailable when it is set to On. Use T9 Dictionary toadd words or delete/reset/modify words.zCancel: Allows you to exit the text input modewithout saving your input message.Sending a MessageAfter completing a message using the Insert/Options,select Send To to send a message.zEnter the recipient(s) as To, Cc and Bcc. You canuse the Contacts option to choose a recipient.zPress the right soft key [Options].You can insert symbols, refer to recent messages orrecent calls to set as a recipient, and edit your message.For the Save to Drafts, Text Entry Mode, Text EntrySettings and Cancel options, see the descriptions above.Inbox Menu 2.2You will be alerted when you receive a message. Theywill be stored in the Inbox. In the Inbox, you canidentify each message by icons. If you are notified thatyou have received a multimedia message, you candownload the whole multimedia message by selectingit in the Receive menu. For download settings, see(Menu 2.9) for details.The following [Options] are available in the Inbox list.]Save Contact Info: You can save the sender's phonenumber in the Contact List.]Delete: You can delete the current message.]Forward: You can forward the selected message toanother party.]Reply All: Allows you to reply to all recipients on theselected message (Only for Multimedia messages).]Information: You can view information about receivedmessages; Message type, Subject, Sender's address,Message date & time, Priority, Message size,Attached Files (Only for Multimedia messages).]Multi Delete: Deletes a number of messages youhave selected from the folder.](https://usermanual.wiki/LG-Electronics-USA/CU400.Users-Manual/User-Guide-691791-Page-44.png)
![45Messaging]Delete All Read Messages: You can delete all readmessages.]Delete All: You can delete all messages.IM Menu 2.3The Instant Messaging feature can only be used with thesupport of the network operator or communities such asAIM, MSN Messenger, Y! Messenger and ICQ. ForInstant Messaging users, a valid User ID and Passwordwill be required in order to login and exchangemessages as well as checking the online status.There are two ways to use the Instant Messaging feature.1. Through the Main Menu.2. Through the IM hotkey (the right navigation key).Short pressing the hotkey will bring up the availableIM clients. The menu items below might not appearsince not all IM communities support the variousoptions. Also the menu strings may appear differentlybased on the selected IM communities. Thekeywords such as User ID, Login and Contact will beused as general terms in IM menus according to thecurrently selected communities such as AIM, MSNMessenger, Y! Messenger and ICQ.Offline MenuSign InThis allows users to login by filling in the User ID andPassword.nNoteOnce the User ID and Password are saved, you will not berequired to type them in again during Login process. Thisfeature is optional.Saved ConversationsThis is where a user can view saved conversations.Settings]My Status: Allows you to set your status toAvailable, Busy or Invisible.]Set Sound: Allows you to set on/off an alert for theContact when they have activity on their session.]Default Provider: Allows you to set the default IMcommunity to login.]Auto Sign On: You may set the automatic IM Loginprocess by choosing between the ’When Power On’or ’When IM Start’ options.](https://usermanual.wiki/LG-Electronics-USA/CU400.Users-Manual/User-Guide-691791-Page-45.png)
![46Messaging]Network: You may check your IM Network Profilesor Server Address information.IM InformationThis indicates the Instant Messaging Client Informationsuch as Client Name and Version Number.Online Menu / 1 to 1 conversationAfter a successful Login, a list of contacts with ScreenNames will appear on screen. Depending on thecursor location in the contacts, the following menuoptions will be available.When cursor is located on a Conversations ListnNoteThe Conversations List contains both the active contactwhere a conversation has taken place as well as anunknown contact.nNoteWhen you select the left/right navigation key or the Confirmkey on the Conversation List, it offers the ability to view orhide conversations.]Send to Others: This offers the ability to send amessage to an unknown contact. When selected, aUser ID must be typed in prior to starting an IMsession or conversation.]Saved Conversations: You may view or delete thestored conversation session.]Search: This allows you to search for the contact byEmail address or name. ]SettingszMy Status: Allows you to set your status toAvailable, Busy or Invisible.zSet Sound: Allows you to set an alert for theContact when they have activity on their session.zAuto Sign On: You may Login to an IM clientautomatically with the ‘When Power On’ or ‘WhenIM Start’ options.]Log Out: This begins the Logout process.When cursor is located on a Conversation]End Conversation: This closes the selectedconversation. If an unknown contact was selected,that contact is deleted.](https://usermanual.wiki/LG-Electronics-USA/CU400.Users-Manual/User-Guide-691791-Page-46.png)
![47Messaging]Block/Unblock Contact: This allows you toblock/unblock the selected Conversations Contact.]View Information: This allows you to view the UserID and Status Text information. ]Search: This allows you to search for the contact byEmail address or name.]Settings: Please refer to the previous Settings Menu.]Log Out: This begins the Logout process.When cursor is located on a Contact List]Add Contact: This adds a new contact to the selectedcontacts’ list; in the meantime this searches for thecontact on the basis of E-mail Address, First Name,or Last Name.]Refresh List: This refreshes the present informationon the contacts within the contacts.]Send to Others: This offers the ability to send amessage to an unknown contact. When selected,the User ID must be typed in prior to starting an IMsession or conversation.]Saved Conversations: This is where a user can viewsaved conversations.]Search: This allows you to search for the contact byEmail address or name.]Settings: Please refer to the previous SettingsMenu.]Log Out: This begins the Logout process.When cursor is located on a Contact]Add Contact: This adds a new contact to theselected contacts list; in the meantime thissearches for the contact on the basis of E-mailAddress, First Name, or Last Name.]Delete Contact: This deletes the selected Contact.]Block/Unblock Contact: This allows or blocksconversation with the selected Contact.]Refresh Contact: This refreshes the presentinformation on the selected contact.]View Information: This allows you to viewinformation. It provides User ID, Status Text.]Search: This allows you to search for the contact byEmail address or name.]Settings: Please refer to the previous Settings Menu.]Log Out: This begins the Logout process.](https://usermanual.wiki/LG-Electronics-USA/CU400.Users-Manual/User-Guide-691791-Page-47.png)
![48MessagingMenu options available in the Conversationscreen]Back To List: This brings the screen back to thecontacts.]Insert: You can insert Symbol, Template andemoticons in the conversation screen.]Block/Unblock Contact: This allows or blocksconversation with the selected Contact.]Save Conversation: Stores the currently activeconversation.]End Conversation: This ends the active conversationand clears the conversation buffer.]Settings: Please refer to the previous Settings Menu.]Text Entry Mode: Sets the text input mode such asabc, Abc, ABC, T9 abc, T9 Abc, T9 ABC and 123.]Text Entry Mode Settings: This selects the T9predictive mode Language.nNotezIn the conversation window, you can use the up/downnavigation key for scrolling through the conversation.zMaximum number of characters supported by a message is400 characters for receiving and 128 characters for sending.zThe present information might not update in real time sothe “Refresh List”/“Refresh Contact” option can be usedfor the most up to date status.Mobile Email Menu 2.4Mobile Email allows you to access your Yahoo! Mail,AOL Mail, AIM Mail and MSN Hotmail accounts onyour phone. So, now you can quickly and easily checkyour email while you’re away from your computer.To Set Up Mobile Email]Open Mobile Email: Slide out the keyboard,highlight Mobile Email (6) and press OK.]Select an Email Provider: Use the navigation key tohighlight the email provider you wish to use andpress Options, then Select.]Log In1. Highlight the ID entry field, press down on thenavigation key, and then type in your existingemail ID.2. Scroll down and highlight the Password field,press down on the navigation key, and enter yourpassword.](https://usermanual.wiki/LG-Electronics-USA/CU400.Users-Manual/User-Guide-691791-Page-48.png)
![49MessagingQuick Tip: Your password is case sensitive. Pressthe ,on the keypad to change to lower case orupper case.3. To save your password scroll down to RememberMe and press down on the navigation key tocheck the box.4. Select Sign In.]Opening an Email: Just scroll down and highlightthe email subject line you want to open and pressdown on the navigation key. Once the email opens,just select Options to reply, forward, or delete.]Deleting an Email: Just scroll down to the email youwant to delete, press Options, then Delete.For additional details, visit www.cingular.com/emailDrafts Menu 2.5You can view the messages saved as a draft. The draftmessages are listed with the date and time of whenthe messages were saved.The following [Options] are available.]Information: Allows you to view the information onthe message.]Multi Delete: Allows you to delete multiplemessages you selet from the folder.]Delete All: Deletes all messages in the folder.Outbox Menu 2.6Outbox is a temporary storage place for messageswaiting to be sent.When you press the [SEND] key, you can make acall to the number of the recipient number of theselected message.If the message is not sentfrom the Outbox, you willreceive a sound alert alongwith a Message Sent Failnotice on the screen.Another attempt will bemade to send the failedmessage and after twounsuccessful attempts, themessage will no longer besent automatically order to send the message that hasfailed, you must press Resend from the Options menu.](https://usermanual.wiki/LG-Electronics-USA/CU400.Users-Manual/User-Guide-691791-Page-49.png)
![50MessagingAfter the maximum number of Send attempts has beenreached the Send function has failed.If you were trying to send a text message, open themessage and check that the Sending options are correct.When the message Send has failed, the following[Options] are available.]Delete: Deletes the selected message which hasfialded.]Edit: Allows you to edit the selected message.]Error Status: Allows you to see the error status ofthe failed message.]Information: Allows you to view the information onthe message.]Delete All: Deletes all messages in the folder.Sent Menu 2.7This is where you can view the lists and contents ofsent messages and also verify if transmission wassuccessful.The following [Options] are available.]Delete: Deletes the selected message from the Sentlist.]Information: Allows you to view information on themessage.]Delete All: Deletes all messages in the folder.Voicemail Menu 2.8This menu provides you with a quick way of accessingyour voice mailbox (if provided by your network).Before using this feature, you must enter the voiceserver number obtained from your service provider.This may already be available; to check the voicemail,press and hold the keyWhen new voicemail is received, the symbol willbe displayed on the screen.nNotePlease check with your network service provider for detailsof their service in order to configure the handset accordingly.](https://usermanual.wiki/LG-Electronics-USA/CU400.Users-Manual/User-Guide-691791-Page-50.png)
![51MessagingTemplates Menu 2.9Text Templates (Menu 2.9.1)There are 6 predefined messages in the list. You canview and edit the template messages or create newmessages.The following [Options] are available.]Send: Allows you to send the selected template viaMessage.]Delete: Allows you to delete the selected templatemessage.]Edit: Allows you to write a new message or edit theselected template message.]Delete All: Deletes all messages in the folder.Multimedia Templates (Menu 2.9.2)1. You can add new multimedia templates by pressingthe left soft key [New].2. The following choices are available under Options.]Preview: You can preview multimedia messagesyou have created. ]Text Entry Mode: Sets the text input mode as abc,Abc, ABC, T9 abc, T9 Abc, T9 ABC and 123.]Text Entry Settings: Allows you to set the text entrylanguage to English, Spanish or French.]Cancel: Allows you to exit the text input modewithout saving your message.Signature (Menu 2.9.3)This feature allows you to create your Text signature.You can use symbols, templates and contacts as partof the signature.Message Settings Menu 2.0Text Message (Menu 2.0.1)]Message Center Number: If you want to send a textmessage, you can get the address of the SMScenter by using this menu.]Email Gateway: You can send the text message toan Email Address via this gateway.]Message Subject: You can enter the SMS Subjectfrom this menu. ]Insert Signature: You can insert your own signature(Menu 2.8.3) that you created.](https://usermanual.wiki/LG-Electronics-USA/CU400.Users-Manual/User-Guide-691791-Page-51.png)
![52MessagingMultimedia Message (Menu 2.0.2)]Priority: You can set the priority of the message youchoose.]Message Subject: You can enter the MMS Subjectwhen this menu is on.]Validity Period: This network service allows you toset how long your multimedia messages will bestored at the message center.]Request Delivery Receipt: Allows you to request adelivery confirmation mail for a Multimedia message.]Send Delivery Receipt: Allows you to send adelivery confirmation mail for a MultimediaMessage.]Request Read Receipt: Allows you to request amessage read confirmation mail for a MultimediaMessage]Send Read Receipt: Allows you to send a messageread confirmation mail for a Multimedia Message.]Automatic Download:- On: You can always receive multimedia messagesautomatically.- Off: You only receive notification messages in theinbox and then you can check the notifications.]Message Center: The details for the Multimediagateway are pre-loaded onto your handset andshould not be changed.]Message Size: This menu allows you to determinethe maximum size of a Multimedia message whenwriting the message.Voicemail (Menu 2.0.3)This menu allows you to set the voicemail centernumber if this feature is supported by the networkservice provider. Please check with your networkservice provider for details of their service in order toconfigure the handset accordingly.Download Messages (Menu 2.0.4)You can set the Service option to determine whetheryou will receive service messages or not.You can set the Automatic Download option todetermine whether you will automatically connect tothe service or not.](https://usermanual.wiki/LG-Electronics-USA/CU400.Users-Manual/User-Guide-691791-Page-52.png)
![55MEdia NetThis menu shows how to access the Internet bylaunching the WAP browser.MEdia Net is one of the services provided by Cingularand it gives you access to all the cool things you cando with your wireless phone. nNoteCheck the availability of WAP services, pricing and tariffswith your network operator and/or the service providerwhose service you wish to use. Service providers will alsogive you instructions on how to use their services.Please contact your service provider to open an Internetaccount.To launch the browser in standby mode, press andhold down the key.Once connected, the homepage is displayed. Thecontent depends on the service provider.To exit the browser at any time, press the [END]key. The idle screen is displayed.Menus for the BrowserYou can surf the Internet using either the phone keysor the WAP Browser menu.Using the Navigation KeysWhen surfing the Internet, the keys function differentlyfrom phone mode. Using the WAP Browser MenuThere are various menus available when surfing theInternet.MEdia Net Home Menu 4.1This connects to the homepage which is defined in theactivated account. The default accountconnects toCingular’s homepage.Key DescriptionScroll each line of the content areaup/down navigation key](https://usermanual.wiki/LG-Electronics-USA/CU400.Users-Manual/User-Guide-691791-Page-55.png)
![56MEdia NetBookmarks Menu 4.2This function allows you to store and edit frequentlyaccessed sites. The following [Options] are available.nNoteYour phone may have some pre-installed bookmarks for sitesnot affiliated with LG. LG does not warrant or endorse thesesites. If you choose to access them, you should take the sameprecautions for security or content as you would with any site.]View: Display the bookmark title and URL]Connect: Connect to the selected bookmark site]New: Add a new bookmark manually]Edit: Modify the existing bookmark item]Delete: Allows you to erase the selected bookmark]Send URL: Allows the bookmark information to besent via SMS to another person]Delete All: Allows you to erase all bookmarksnNotePre-installed bookmarks cannot be deleted or edited byusers. In order to change the text input mode for symbol input,please refer to the General Functions section.Saved Pages Menu 4.3This saves the page on display as an off-line file. A maximum of 20 pages can be saved.Go to URL Menu 4.4You can directly connect to the site you want byentering a specific URL.]Enter URL: Input the URL manually to connect to theInternet site.]Recent Pages: You can manage the list of theInternet pages you visited. Security Menu 4.5A list of the available certificates is shown.]Certificates: You can see the list of certificates andview them in detail.]Clear Session: Removes the secure session.](https://usermanual.wiki/LG-Electronics-USA/CU400.Users-Manual/User-Guide-691791-Page-56.png)
![57MEdia NetBrowser Settings Menu 4.6Accounts (Menu 4.6.1)This includes the network information used to connectthe browser to the Internet. Select the desired account by pressing the soft key,which is labelled as “Activate”. This will activate theaccount that will be used for future connection.MEdia Net is the predefined account that is set asdefault.]Activate: Select the account among the list ofaccounts, so it can be used for future connection. ]View: Allows you to see the specific accountinformation.]Edit: Allows you to change the account information.]Delete: Allows you to delete the account.]New: Allows you to create a maximum of 20 newaccounts.nNoteYou cannot edit and delete pre-installed accounts.In order to create a new account, please fill in thenetwork information.1. Account Name: Name associated with new account.2. Homepage: Homepage URL3. Connection Mode: Select from UDP(CO), UDP(CL),TCP with Proxy, TCP without Proxy4. Proxy Address: Proxy server address5. Proxy Port Number: Proxy server’s port number6. Security: Select the secure or non-secure mode. 7. Time Out: Values between 10 to 600 seconds8. Network Profiles: You can choose one from thenetwork profiles. Note you can create a newnetwork profile by selecting the list option on thecenter key.nNote1. The account information will be available from youroperator. 2. Creating or editing an account requires care. The browsercannot connect to the Internet if the account informationis not correct.](https://usermanual.wiki/LG-Electronics-USA/CU400.Users-Manual/User-Guide-691791-Page-57.png)
![58MEdia NetCache Settings (Menu 4.6.2)The web pages you have accessed are stored in thememory of the phone.]Clear Cache: Remove all cached data in thememory.]Allow Cache: Set a value to determine whether aconnection attempt is made through the cache or not.nNoteA cache is a buffer memory, which is used to store datatemporarily, especially when it is online.Cookie Settings (Menu 4.6.3)The information or services you have accessed arestored in the cookie.]Delete Cookies: Remove all cookies.]Allow Cookies: Set a value to determine whether aconnection attempt is made through the cookie ornot.Character Encoding (Menu 4.6.4)Select a character set from the following list: 1 Automatic 2 English(ASCII)3 English(ISO) 4 English(LATIN)5 Unicode(UCS2 BE) 6 Unicode(UCS2 LE)7 Unicode(UCS2 Auto) 8 Unicode(UTF-16 BE)9 Unicode(UTF-16 LE) 0 Unicode(UTF-16 Auto)* Unicode(UTF-8)Scrolling Control (Menu 4.6.5)This allows you to determine the scroll speed andselect from 1 Line, 2 Lines or 3 Lines.Show Image (Menu 4.6.6)This allows you to view pictures when browsing. AuthWallet (Menu 4.6.7)If set to On, the user’s personal information such as IDand Password used to access the Internet site will besaved automatically for future use.](https://usermanual.wiki/LG-Electronics-USA/CU400.Users-Manual/User-Guide-691791-Page-58.png)
![59MEdia NetOnline menuOnce you are connected to the Internet, the followingmenu options are available:]Back: Moves to the previous page.]Forward: Moves to the next page.]Reload: Loads the current page again.]Home: Moves to the initial homepage.]Go to URL: Connects to the specific URL after editing.]Bookmarks: You can add or save the current page toBookmark or view the list saved under Bookmark.]Settings: You can set browser related options suchas Clear cache, Clear cookies, etc.](https://usermanual.wiki/LG-Electronics-USA/CU400.Users-Manual/User-Guide-691791-Page-59.png)
![62My StuffGames Menu 7.1Java is a technology developed by Sun Microsystems.Similar to the way you would download the JavaApplet using the standard Netscape or MS InternetExplorer browsers, Java MIDIet can be downloadedusing a WAP enabled phone. Depending on the serviceprovider, Java based programs such as Java gamescan be downloaded and run on a phone. Oncedownloaded, the Java program can be viewed withinthe Games menu where you can select, execute ordelete. Java program files saved in the phone are in.JAD and .JAR formats.nNoteThe JAR file is a compressed format of the Java programand the JAD file is a description file that includes all detailedinformation. From the network, prior to download, you canview all detailed file descriptions from the JAD file.nWarningOnly J2ME (Java 2 Micro Edition) based programs will run ina phone environment.J2SE (Java 2 Standard Edition) based programs will only runin a PC environment.]Shop Games: This menu option connects toCingular’s game download site.]Games List: You can see the default anddownloaded games in the list.Applications Menu 7.2This menu displays the list of Java programsdownloaded using WAP. All previous downloadedprograms can be selected, deleted, or viewed in detailwithin the Application menu.]Shop Applications: This menu option connects toCingular’s application download site.]Applications List: You can see the downloadedgames and MobiTV in the list.Audio & Ringtones Menu 7.3]Shop Tones: This menu option connects toCingular’s ringtone download site.]Record Voice: You can record your own audio bypressing the center key [OK].]Files: You can view the audio files in the list.](https://usermanual.wiki/LG-Electronics-USA/CU400.Users-Manual/User-Guide-691791-Page-62.png)
![63My StuffGraphics Menu 7.4]Shop Graphics: This menu option connects toCingular’s graphic download site.nNoteAdditional charges may be incurred when downloadinggraphics. Contact your service provider for further information.]Take Photo: You can take your own photo bypressing the center key [OK].]Make Animated GIF: You can make an animation filewith the selected images in the list.]Files: You can view the graphic files in the list.Video Menu 7.5]Record Video: You can record your own video bypressing the center key [OK].]Files: You can view the video files in the list.nNoteDRM (Digital Rights Management) Contents Copyrightprotected contents.DRM sometimes restricts some functions, such as send, andedit. The indicates content controlled by DRM protection.Tools Menu 7.6Alarm Clock (Menu 7.6.1)The alarm function allows you to set up multipleseparate alarms. You can also set the time, repetitioninterval and alarm sound.Select your desired alarm setting to configure from thealarm list. If there is no alarm setting, press the left softkey [New] to add a new alarm.]Time: Select the desired set time mode using thenavigation key. Input your desired alarm time byspecifying the hour and minute. If the time is in 12hour clock format, you have to select either am’ orpm’ using the center soft key.]Repeat: Select the desired repeat mode using thenavigation key.]Alarm Tone: Select the alarm sound to use for thealarm using the key.]Memo: Input alarm name.](https://usermanual.wiki/LG-Electronics-USA/CU400.Users-Manual/User-Guide-691791-Page-63.png)
![64My StuffCalendar (Menu 7.6.2)When you enter this menu a calendar will be displayed.The square cursor is used to locate a particular day.The bottom bar on the calendar indicates schedule(s)for that day. This function helps to remind you of theschedule. The phone will sound an alarm tone if it hasbeen set for a specific schedule item.The following [Options] are available:]Search: Allows you to search the saved schedule(s)by pressing the character keys.]Delete: Allows you to delete the selected schedule.]Send via: Sends the selected schedule by Messageor Bluetooth.]Set Holiday: Allows you to set your personal holidayfor the selected date.]View All: Allows you to view all saved schedules.]Go to Date: Allows you to jump to a specific date.]Delete Schedules: Deletes the defined schedulessuch as Old Schedules, Daily, Weekly, Monthly orAll Schedules.Notepad (Menu 7.6.3)You can create up to a maximum of 30 memos.1. Select a memo pad you want to edit.2. Press the left soft key [New] to create a new memo.3. Input the memo and press the center key [Save] tosave.Calculator (Menu 7.6.4)The calculator function allows you to add, subtract,multiply and divide. You can input numbers using thenumber keys, and input operators using the up, down,left, and right navigation keys.You can input a decimal point by pressing the [Star] key.Whenever you press the key, characters aresequentially deleted in reverse order.Key Descriptionup/down navigation key Weeklyleft/right navigation key Dailykey/ key Annuallykey/ key Monthly](https://usermanual.wiki/LG-Electronics-USA/CU400.Users-Manual/User-Guide-691791-Page-64.png)
![65My StuffTip Calculator (Menu 7.6.5)This feature allows you to quickly and easily calculatethe tip amount based on the total bill as well as thesplit of the total bill based on the number of people. World Clock (Menu 7.6.6)The World clock function provides time information onmajor cities worldwide.1. You can view the time of desired city using thenavigation or the right soft key [Options] - [Cities].2. You can select a desired city as a base using the leftsoft key [Home zone].If you want to use Dual Clock, you must set "Homezone"to system time where you are currently stayingTasks (Menu 7.6.7)This feature allows you to save and manage a task. 1. To add a new To do item, select the left soft key[New] in the Task enquiry screen.2. Input due date, notes, priority and status for the newTask. 3. Press the left soft key [Save] to save the Task item.The following [Options] are available in the Task list.]Status: Allows you to change the status of theselected task as In Progress or Completed.]Delete: Deletes the selected task.]Send Via: Enables the selected task to be sent viaMessage and Bluetooth.]Edit: Allows you to edit a saved task.]View Calendar: The calendar pop-up window isdisplayed.]Delete Tasks: Deletes All Completed, All Past Tasksor All Tasks. Stop Watch (Menu 7.6.8)This menu allows you to record the elapsed time of anevent. The duration of an individual lap time (up to 20times) and the total time can be displayed.]New Time1. To start timing, press the center key [Start]. Therunning time is displayed as HH.MM.SS.hh (hours,minutes, seconds, hundredths of a second).2. During the timing, you can record an individual laptime by pressing the right soft key [Lap]. Up to 20lap times can be recorded.](https://usermanual.wiki/LG-Electronics-USA/CU400.Users-Manual/User-Guide-691791-Page-65.png)
![66My Stuff3. You can stop or restart timing by pressing the key.4. To reset the stop watch, press the left soft key[Reset].]Saved Times: You can see the saved recorded timeswhich are in the lap time list of the New Time option. Unit Converter (Menu 7.6.9)This function converts any measurement into a unityou want.There are 6 types of units that can be converted: Area,Length, Weight, Temperature, Volume, and Velocity.nNoteYou can input a decimal number by pressing the [Star]key.Date Finder (Menu 7.6.0)The date finder shows the start date, the target dateand the number of remaining days. D-Day Counter (Menu 7.6.*)1. To add a new D-Day Counter item, select the left softkey [New]. 2. Input the Date and notes when you add an item.3. Press the left soft key [Save] to save the item.]Edit: You can edit the selected item.]Delete: You can delete the selected item.]Show at Idle Screen: You can see the Remainingdays for this item (D-Day) on the Idle screen topright corner.]Delete All: Deletes all saved items.Camera & Recordings Menu 7.7Take Photo (Menu 7.7.1)Using the camera module built into your phone, youcan take pictures of people or events while on themove. Additionally, you can send photos to otherpeople in a picture message. The right soft key[Options] will bring up the following options.]Change to Video Mode: Go to the video application,enables you to record a video clip.]Resolution: Sets the image size to 1280*960(default), 640*480, 320*240 or 160*120. The selectedimage size appears on the capture screen.](https://usermanual.wiki/LG-Electronics-USA/CU400.Users-Manual/User-Guide-691791-Page-66.png)
![67My Stuff]Quality: You can select the desired quality of photoby selecting either Super Fine, Fine or Normal modeby using the navigation keys.]Reverse View: Allows you to reverse the image byusing the Side Keys.]View Full Image: Allows you to view the subject infull screen.]Self Timer: Determines the camera timer.]Advanced Settings- White Balance: This adjusts the Light Effect leveland you can select from the following options:Auto / Daylight / Incandescent / Cloudy /Fluorescent / Night Mode - Color- Color Effect: Allows you to apply special effects tothe picture. Press the left or right navigation key tofind the tone you want to use from the followingoptions: Color, Sepia, Mono and Negative.- Shutter Tones: Allows you to select a sound whenyou press the shutter. Tone 1 / Tone 2 / Tone 3 /Off]Default Settings: This restores the default camerasettings (Size, Brightness, Zoom, etc.).nNoteIn Take Photo mode, you can adjust the zoom scale by usingthe up/down navigation keys. The maximum zoom scaledepends on the resolution as follows.In Take Photo mode, you can adjust the brightness by usingthe left/right navigation key. Record Video (Menu 7.7.2)You can record a video clip in this menu by pressingthe Camera key. Before starting to record, press theright soft key [Options] to set the following values.Select the desired value and press the key toconfirm.]Change to Photo Mode: Go to the cameraapplication which enables you to take a still picture.]Video Record Mode: Sets the recording mode toeither MMS Video Mode or General Mode. Resolution Zoom scale1280*960 x1640*480 x1~x2320*240 x1~x2160*120 x1~x4](https://usermanual.wiki/LG-Electronics-USA/CU400.Users-Manual/User-Guide-691791-Page-67.png)
![68My Stuff]Quality: Determines the quality of a video clip.]Reverse View: Allows you to reverse the image.]White Balance: This adjusts the light effect leveland you can select from the following options: Auto / Daylight / Incandescent / Cloudy /Fluorescent/ Night mode.]Color Effects: Allows you to apply special effects tothe video clip. Press the Left/Right Navigation Keysto find the tone you want to want to use from thefollowing options: Color, Sepia, Mono and Negative.]Default Settings: This restores the default camerasettings (Size, Brightness, Zoom, etc.).nNoteIn Video Record mode, you can adjust the zoom scale byusing the up/down navigation keys. The maximum zoomscale depends on the resolution as follows.In Record Video mode, you can adjust the brightness byusing the left/right navigation keys.Record Voice (Menu 7.7.3)You can record an audio clip in this menu. Therecorded audio file is saved automatically in theAudios menu (Menu 7.2).The right soft key [Options] will bring up the followingoptions.]Record Mode: Sets the recording mode to eitherMMS or General.]Quality: Determines the quality of an audio clip.Other Files Menu 7.8When you receive files of an undefined format (suchas .vcs, .vcf, etc.) via E-mail, the files are saved in thisfolder.The following [Options] are available.]Delete: You can delete the selected file.]Rename: You can edit the name of the selected file.]New Folder: You can create a new folder.]Sort By: You can sort the folders by name, date andtype.]Delete All: You can delete all files.Resolution Zoom scale320*240 x1176*144 x1~x10](https://usermanual.wiki/LG-Electronics-USA/CU400.Users-Manual/User-Guide-691791-Page-68.png)
![69My Stuff]Multi Delete: You can delete several files at once.]Information: You can view information about theselected folder.](https://usermanual.wiki/LG-Electronics-USA/CU400.Users-Manual/User-Guide-691791-Page-69.png)
![70Address BookContact List Menu 8.1This menu allows you to save and manage contactaddress information. The Contacts’ functions allow youto add a new address or search saved contactaddresses by name.New Contact Menu 8.2This menu allows you to add a new contact address.You can enter input contact address informationincluding name, phone numbers, email addresses,group information items, memos, ring tones, and image(photograph).You have to select the Handset or the SmartChipmemory using the left and right navigation keys.Caller Groups Menu 8.3This menu allows you to manage group information. Bydefault, there are 4 groups: family, friends, colleaguesand school. You can also configure a ring tone for agroup so that the group ring tone sounds when a callfrom a specific contact address within that grouparrives and there is no ring tone configured for thespecific contact address.Speed Dial List Menu 8.4This menu allows you to configure the speed dialnumbers. You can select a number from 2 to 9 as aspeed dial. You can configure speed dial numbers forany of the 8 numbers for a specific contact address sothat a contact address may have multiple speed dialnumbers.Copy All Contacts Menu 8.5This menu allows you to copy all of the informationfrom your SmartChip, e.g. name, handset number, etc.,to your handset. If a name is duplicated during thecopying operation, the information is also duplicated.]SmartChip to Handset: You can copy the entry fromthe SmartChip card to the phone memory.]Handset to SmartChip: You can copy the entry fromthe handset memory to the SmartChip card (not allthe data will be copied).](https://usermanual.wiki/LG-Electronics-USA/CU400.Users-Manual/User-Guide-691791-Page-70.png)
![71Address BookDelete All Contacts Menu 8.6You can delete all entries in the SmartChip and theHandset.Press the [END] key to return to standby mode.Service Dial Numbers Menu 8.7You can view the list of Service Dialing Numbers (SDN)assigned by your network provider. Such numberscould include the emergency, directory assistance andvoice mail numbers.1. Select the Service dial number option.2. The names of the available services will be shown.3. Use the up/down navigation keys to select a service.Press the [SEND] key.My Numbers Menu 8.8This displays your phone numbers stored in theSmartChip.](https://usermanual.wiki/LG-Electronics-USA/CU400.Users-Manual/User-Guide-691791-Page-71.png)
![72SettingsAudio & Ringtones Menu 9.1There can be 4 sound modes: General, Vibrate All,Silent and Ear Mic. General, Vibrate, and All Silentmodes can be changed from the Volume menu underRing tone. In addition, pressing and holding the [Star] key on idle screen mode can swap Normal andManner mode. Ear Mic is available when respectiveinstruments are attached.Shop Tones (Menu 9.1.1)Connects to Cingular Ring tone Shops.Ringtones (Menu 9.1.2)Shows and plays ring tones. These can be downloadedring tones from Ring tone shops.Volume (Menu 9.1.3)This menu controls Ringtone, Key Tone, Call andMultimedia volume. It is available on Ring tone volumelevel 1~7.Ring Alert Type (Menu 9.1.4)Supports 3 ring alert types. Ring, Ring and Vibration,and Ring after Vibration.Key Tones (Menu 9.1.5)This menu option allows you to select a tone thatsounds when a key is pressed. You can set the keytone to on or off.Message Alert Tones (Menu 9.1.6)Allows you to select an alert tone which is playedwhen a message is received. You can select any onefrom 10 message alert tones.nNoteFull length music tracks cannot be set as ringtones.Display Menu 9.2Shop Graphics (Menu 9.2.1)Connects to Cingular’s graphic download site.Wallpapers (Menu 9.2.2)You can select the background picture in standbymode.Backlight Timer (Menu 9.2.3)Use this to select whether or not the phone uses thebacklight.](https://usermanual.wiki/LG-Electronics-USA/CU400.Users-Manual/User-Guide-691791-Page-72.png)
![74Settingsphone. This allows you to call using a Bluetoothconnection.A2DP profileThis icon appears when the A2DP profile is usedbetween the stereo headset device and thephone. This allows you to listen to an audio clip.A2DP is the Advanced Audio Distribution Profile,which provides support for streaming eithermono or stereo audio using Bluetooth.Hand-free +A2DP profileThis icon appears when both profiles of thehands-free and the A2DP are used between thecompatible device and the phone. This allows youto call and listen to an audio clip using aBluetooth connection.For using each device, see a manual that comes withthe device.nNoteWe recommend that your phone and the Bluetooth device youare communicating with be no more than 10 metres apart. Theconnection may be improved if there are no solid objects inbetween your phone and the other Bluetooth device.Bluetooth On/Off (Menu 9.3.1)This menu sets the Bluetooth on or off using thenavigation key. Device List (Menu 9.3.2)This function allows you to view the list of all devicesthat are paired with your phone at once.To add a new device, press the left soft key [New]1. Select the [New] key to search the device that canbe connected and which is within range. 2. If you want to stop searching, press the right softkey [Cancel].3. All of the devices found are displayed in the pop-upmenu.Select the desired device by pressing the OK key, andentering the password.Bluetooth Files (Menu 9.3.3)This option enables you to view a list of savedapplication files downloaded via Bluetooth. You canadd an application file stored in your phone.](https://usermanual.wiki/LG-Electronics-USA/CU400.Users-Manual/User-Guide-691791-Page-74.png)
![75SettingsBluetooth Settings (Menu 9.3.4)This menu allows you to configure the profile for aBluetooth.]My Visibility1. Selecting the Show option exposes your phone toother Bluetooth devices.2. Selecting Hide shows your phone only to alreadypaired devices.]My Name: Allows you to change the handset'sname that can be seen by other Bluetooth devices.]My Address: You can check your Bluetooth address.You cannot change the default setting.Date & Time Menu 9.4Set Date (Menu 9.4.1)This allows you to enter the day, month and year. Youcan change the date format via the Date Format menuoption. Date Format (Menu 9.4.2)MM/DD/YYYY(month/day/year)DD/MM/YYYY(day/month/year)YYYY/MM/DD(year/month/day)Set Time (Menu 9.4.3)This allows you to enter the current time. You canchoose the time format via the Time Format menuoption.Time Format (Menu 9.4.4)12 Hours/24 HoursAuto Update (Menu 9.4.5)Select On to set the phone to automatically update thetime and date according to the current local time zone.](https://usermanual.wiki/LG-Electronics-USA/CU400.Users-Manual/User-Guide-691791-Page-75.png)
![76SettingsCall Menu 9.5Call Forwarding (Menu 9.5.1)When this network service is activated, you can directyour incoming calls to another number, for example, toyour voice mailbox number. For details, contact yourservice provider. Select one of the divert options, forexample, select If busy to divert voice calls when yournumber is busy or when you reject incoming calls. The following options are available: ]All Voice Calls: Diverts voice calls unconditionally. ]If Busy: Diverts voice calls when the phone is in use.]If No Answer: Diverts voice calls which you do notanswer.]If Out of Reach: Diverts voice calls when the phoneis switched off or out of coverage. ]All Data Calls: Diverts to a number with a PCconnection unconditionally. ]All Fax Calls: Diverts to a number with a faxconnection unconditionally. Send My Number (Menu 9.5.2)This network service allows you to set your phonenumber to be displayed On or hidden Off from theperson you are calling. You can select Set by Networkif you prefer to have different settings for differentservice providers.Auto Redial (Menu 9.5.3)Select On, your phone redials the number you're tryingto call up to 10 times after you hear a quick, engagedsignal. Press [END] to stop the call attempts.This feature attempts to redial numbers that areengaged due to the wireless network. It does not redialnumbers to an engaged party.nNoteThere will be no alert indicating the call has been connected.You must stay on the line to hear when the call is connected.Answer Mode (Menu 9.5.4)This allows you to determine how to answer thephone.]Any Key: You can answer an incoming call bypressing any key, except the [END] key.](https://usermanual.wiki/LG-Electronics-USA/CU400.Users-Manual/User-Guide-691791-Page-76.png)
![77Settings]Send Key Only: You can only answer an incomingcall by pressing the [SEND] key.]Flip Open: When the phone rings, you can answer acall simply by opening the flip.Minute Minder (Menu 9.5.5)This option allows you to specify whether the phonewill beep every minute during an outgoing call to keepyou informed of the length of the call.Call Waiting (Menu 9.5.6)The network will notify you of a new incoming callwhile you have a call in progress. Select Activate torequest the network to activate call waiting, Deactivateto request the network to deactivate call waiting, orView Status, to check if the function is active or not.Call Reject (Menu 9.5.7)This menu allows you to enable or disable call rejectfor all numbers or a specific number.]Call Reject On/Off: This feature allows you to rejector not the incoming calls unconditionally bydisconnecting. When the Reject All Calls option isset, all incoming calls are routed directly to Voicemail.]Reject on List: Configures conditional call rejectmode. Press the left soft key [New] to add the phonenumber to be rejected to the list. When you add anumber to the list, you can add the number byentering it directly or by searching for the number inthe Contact List.TTY (Menu 9.5.8)Allows you to attach a TTY device enabling you tocommunicate with parties also using a TTY device. A phone with TTY support is able to translate typedcharacters to voice. Voice can also be translated intocharacters and then displayed on the TTY.](https://usermanual.wiki/LG-Electronics-USA/CU400.Users-Manual/User-Guide-691791-Page-77.png)
![79Settings6. When a connection is made, use the TTY equipmentto type in and send a text message or send a voicemessage.7. The voice or text message from the receiver endappears on the TTY equipment display.Send DTMF Tones (Menu 9.5.9)You can send the DTMF (dual tone multi-frequency)tones of the number on the display during a call.This option is helpful for entering a password oraccount number when you call an automated system,like a banking service.Security Menu 9.6Various codes and passwords are used to protect thefeatures and settings of your phone. They aredescribed in the following sections.Lock Handset (Menu 9.6.1)You can use a security code to avoid unauthorized useof the phone.If you set phone lock to When Power On, the phonewill request a security code whenever you switch thephone on. If you set the phone lock to When SmartChipChanged, your phone will request a security code onlywhen you change your SmartChip. If you set the phonelock to Immediately, your phone will lock immediately.PIN Code Request (Menu 9.6.2)When the PIN code request feature is set to ‘On’, youmust enter your PIN each time you switch the phoneon. Consequently, any person who does not have yourPIN cannot use your phone without your approval.nNoteBefore setting the PIN code request feature to Off, you mustenter your PINThe following [Options] are available:]On: You must enter the PIN each time the phone isswitched on.]Off: The phone connects directly to the networkwhen you switch it on.Fixed Dial Number (Menu 9.6.3)This allows you to restrict your outgoing calls toselected phone numbers, if this function is supportedby your SmartChip. The PIN2 code is required.](https://usermanual.wiki/LG-Electronics-USA/CU400.Users-Manual/User-Guide-691791-Page-79.png)
![80SettingsThe following [Options] are available:]On: You can only call phone numbers stored in theAddress Book. You must enter your PIN2.]Off: You can call any number.nNoteNot all SmartChips have a PIN2. If your SmartChip does not,this menu option is not displayed.Change Codes (Menu 9.6.4)The Change codes feature allows you to change yourcurrent password to a new one. You must enter thecurrent password before you can specify a new one.You can change the access codes for: Security Code,PIN1, PIN2nNotePIN: Personal Identification Number.Connection Menu 9.7Network Profiles (Menu 9.7.1)This menu shows the Network Profile. You canregister, delete and edit by using the Options Menu.However, you cannot delete or edit defaultconfigurations provided by Cingular.Network Selection (Menu 9.7.2)]Automatic: This function automatically searches forthe network and registers the handset to thenetwork.]Manual: This function enables you to search thenetwork list and specify which network to attemptregistration with.Preferred Lists (Menu 9.7.3)You can select preferred lists to display it saved in thecurrent SmartChip and can edit the current preferredlist.Dial Up Networking (Menu 9.7.4)You can use your phone with a variety of PCconnectivity and data communications applications.Select USB and Bluetooth you want to use for the dataconnection.](https://usermanual.wiki/LG-Electronics-USA/CU400.Users-Manual/User-Guide-691791-Page-80.png)
![81SettingsFlight Mode Menu 9.8This allows you to use only the phone’s features thatdo not require the use of the wireless network whenyou are in an airplane or in places where the wirelessnetwork is prevented.If you set the flight mode on, the icon will be displayedon the screen instead of the network signal icon.]On: You cannot make (or receive) any calls,including emergency calls, or use other featuresthat require network coverage]Off: You can deactivate the flight mode and restartyour handset to access the network.Software Update Menu 9.9This menu is used to resume a postponed softwareupdate. If new software exists, the Cingular servernotifies devices using a WAP push message. Beforeupdating new software after downloading it from theCingular server, users will whether they would like topostpone the operation. Reminder times can be set to30 minutes, 1 hour, and 3 hours. When the time is up,users are prompted again or users can resume thepostponed operation using this menu at any time.Check Memory Menu 9.0Common (Menu 9.0.1)This function shows the status of the user memory ofthe handset.Reserved (Menu 9.0.2)This function shows the status of the reserved memoryfor the user (Text Message, Contact List, Calendar,Tasks, Memo).SmartChip (Menu 9.0.3)This function shows the status of the SmartChip carduser memory.Handset Information Menu 9.*This menu is used to view My Numbers, Manufacturerand Model Name information etc.](https://usermanual.wiki/LG-Electronics-USA/CU400.Users-Manual/User-Guide-691791-Page-81.png)
![82SettingsReset Settings Menu 9.#This function allows you to restore factory settings. Todo this, you need the security code.Clear Memory (Menu 9.#.1)Deletes downloaded/user created contents (e.g.:images, videos) from Handset content.]Handset Contents: Deletes all downloaded/usercreated Images, Videos & Sounds from the HandsetMemory.]Handset Personal info.: Restores PersonalInformation stored in the handset memory (e.g.:address book, messages, tasks, alarm, Calendarschedules) to default values.Reset Default (Menu 9.#.2)Restores the settings (e.g.: Audio, Display, Language,Date & Time, Bluetooth Settings) stored in the handsetmemory to default values.](https://usermanual.wiki/LG-Electronics-USA/CU400.Users-Manual/User-Guide-691791-Page-82.png)
![83Q&APlease check to see if any problems you have encountered with the phone are described in this section before takingthe phone in for a service or calling a service engineer.QHow do I view the list of outgoing calls, incomingcalls and missed calls?APress the [SEND] key.QHow do I view all numbers stored in the memory?APress the down navigation key.QWhy is the connection inconsistent or not audible incertain areas?AWhen the frequency environment is unstable in acertain area, connection may be inconsistent andnot audible. Relocate to another area and try again.QWhy is the connection not consistent or abruptlydisconnects even when established?AWhen frequency is unstable or weak or if there aretoo many users, connection may be cut off evenafter it was established. Please try again later orattempt after relocating to other areas.QWhy does the LCD not turn on?ARemove the battery and turn on the power afterplacing it back in. If there is no change, fully chargethe battery and try again.QWhy is there an echo when a connection is madewith certain telephones in a certain area?AThis is called the ‘Echo Phenomenon’, which occursif the connection volume is too high or caused byspecial properties (semi-electronic telephoneexchange) of the equipment on the other end.QWhy does the phone heat up?AThe phone may get hot when there is a very longcall duration or when games are played or evenwhen surfing the Internet for a long time. This hasno effect upon the life of the product orperformance.](https://usermanual.wiki/LG-Electronics-USA/CU400.Users-Manual/User-Guide-691791-Page-83.png)
![87Safety GuidelinesTips on Efficient OperationFor your phone to operate most efficiently:]Do not touch the antenna unnecessarily when thephone is in use. Contact with the antenna affectscall quality and may cause the phone to operate at ahigher power level than otherwise needed.DrivingCheck the laws and regulations on the use of wirelessphones in the areas where you drive. Always obeythem. Also, if using your phone while driving, please:]Give full attention to driving - driving safely is yourfirst responsibility;]Use hands-free operation, if available;]Pull off the road and park before making oranswering a call if driving conditions so require.Electronic DevicesMost modern electronic equipment is shielded from RFsignals. However, certain electronic equipment maynot be shielded against the RF signals from yourwireless phone.PacemakersThe Health Industry Manufacturers Associationrecommends that a minimum separation of six (6’)inches be maintained between a handheld wirelessphone and a pacemaker to avoid potential interferencewith the pacemaker. These recommendations areconsistent with the independent research by andrecommendations of Wireless Technology Research.Persons with pacemakers:]Should ALWAYS keep the phone more than sixinches from their pacemaker when the phone isturned ON;]Should not carry the phone in a breast pocket.]Should use the ear opposite the pacemaker tominimize the potential for interference.]If you have any reason to suspect that interferenceis taking place, turn your phone OFF immediately.Hearing AidsSome digital wireless phones may interfere with somehearing aids. In the event of such interference, youmay want to consult your service provider.](https://usermanual.wiki/LG-Electronics-USA/CU400.Users-Manual/User-Guide-691791-Page-87.png)
![89Safety GuidelinesFor Vehicles Equipped with an Air BagAn air bag inflates with great force. DO NOT placeobjects, including either installed or portable wirelessequipment, in the area over the air bag or in the air bagdeployment area. If in-vehicle wireless equipment isimproperly installed and the air bag inflates, seriousinjury could result.Safety InformationPlease read and observe the following information forsafe and proper use of your phone and to preventdamage. Also, keep the user guide in an accessibleplace at all the times after reading it.Charger and Adapter Safety]The charger and adapter are intended for indooruse only.Battery Information and Care]Please dispose of your battery properly or take it toyour local wireless carrier for recycling.]The battery does not need to be fully dischargedbefore recharging.]Use only LG-approved chargers specific to yourphone model since they are designed to maximizebattery life.]Do not disassemble or impact the battery as it maycause electric shock, short-circuit, and fire. Storethe battery in a place out of reach of children.]Keep the battery’s metal contacts clean.]Replace the battery when it no longer providesacceptable performance. The battery can berecharged several hundred times beforereplacement.]Recharge the battery after long periods of non-useto maximize battery life.]Battery life will vary due to usage patterns andenvironmental conditions.]Use of extended backlighting, MEdia Net Browsing,and data connectivity kits affect battery life andtalk/standby times.]The self-protection function of the battery cuts thepower of the phone when its operation is in anabnormal state. In this case, remove the batteryfrom the phone, reinstall it, and turn the phone on.](https://usermanual.wiki/LG-Electronics-USA/CU400.Users-Manual/User-Guide-691791-Page-89.png)
![90Safety GuidelinesExplosion, Shock, and Fire Hazards]Do not put your phone in a place subject toexcessive dust and keep the minimum requireddistance between the power cord and heat sources.]Unplug the power cord prior to cleaning your phone,and clean the power plug pin when it is dirty.]When using the power plug, ensure that it is firmlyconnected. If it is not, it may cause excessive heator fire.]If you put your phone in a pocket or bag withoutcovering the receptacle of the phone (power plugpin), metallic articles (such as a coin, paperclip orpen) may short-circuit the phone. Always cover thereceptacle when not in use.]Do not short-circuit the battery. Metallic articlessuch as a coin, paperclip or pen in your pocket orbag may short-circuit the + and – terminals of thebattery (metal strips on the battery) upon moving.Short-circuit of the terminal may damage the batteryand cause an explosion.General Notice]Using a damaged battery or placing a battery in yourmouth may cause serious injury.]Do not place items containing magneticcomponents such as a credit card, phone card,bank book or subway ticket near your phone. Themagnetism of the phone may damage the datastored in the magnetic strip.]Talking on your phone for a long period of time mayreduce call quality due to heat generated duringuse.]When the phone is not used for a long period time,store it in a safe place with the power cordunplugged.]Using the phone in proximity to receiving equipment(i.e., TV or radio) may cause interference to thephone.]Do not use the phone if the antenna is damaged. If adamaged antenna contacts skin, it may cause aslight burn. Please contact an LG AuthorizedService Centre to replace the damaged antenna.]Do not immerse your phone in water. If thishappens, turn it off immediately and remove the](https://usermanual.wiki/LG-Electronics-USA/CU400.Users-Manual/User-Guide-691791-Page-90.png)
![91Safety Guidelinesbattery. If the phone does not work, take it to an LGAuthorized Service Centre.]Do not paint your phone.]The data saved in your phone might be deleted dueto careless use, repair of the phone, or upgrade ofthe software. Please backup your important phonenumbers. (Ring tones, text messages, voicemessages, pictures, and videos could also bedeleted.) The manufacturer is not liable for damagedue to the loss of data.]When you use the phone in public places, set thering tone to vibration so as not to disturb others.]Do not turn your phone on or off when putting it inyour ear.FDA Consumer UpdateThe U.S. Food and Drug Administration Centre forDevices and Radiological Health Consumer Update onMobile Phones.1. Do wireless phones pose a health hazard?The available scientific evidence does not show thatany health problems are associated with usingwireless phones. There is no proof, however, thatwireless phones are absolutely safe. Wirelessphones emit low levels of radiofrequency energy (RF)in the microwave range while being used. They alsoemit very low levels of RF when in the standby mode.Whereas high levels of RF can produce healtheffects (by heating tissue), exposure to low level RFthat does not produce heating effects causes noknown adverse health effects. Many studies of lowlevel RF exposures have not found any biologicaleffects. Some studies have suggested that somebiological effects may occur, but such findings havenot been confirmed by additional research. In somecases, other researchers have had difficulty inreproducing those studies, or in determining thereasons for inconsistent results.2. What is the FDA’s role concerning the safety ofwireless phones?Under the law, the FDA does not review the safety ofradiation-emitting consumer products such aswireless phones before they can be sold, as it doeswith new drugs or medical devices. However, theagency has authority to take action if wirelessphones are shown to emit radiofrequency energy](https://usermanual.wiki/LG-Electronics-USA/CU400.Users-Manual/User-Guide-691791-Page-91.png)
![92Safety Guidelines(RF) at a level that is hazardous to the user. In such acase, the FDA could require the manufacturers ofwireless phones to notify users of the health hazardand to repair, replace, or recall the phones so thatthe hazard no longer exists.Although the existing scientific data do not justifyFDA regulatory actions, the FDA has urged thewireless phone industry to take a number of steps,including the following:]Support needed research into possible biologicaleffects of RF of the type emitted by wirelessphones;]Design wireless phones in a way that minimizesany RF exposure to the user that is not necessaryfor device function; and]Cooperate in providing users of wireless phoneswith the best possible information on possibleeffects of wireless phone use on human health.The FDA belongs to an interagency working group ofthe federal agencies that have responsibility fordifferent aspects of RF safety to ensure coordinatedefforts at the federal level. The following agenciesbelong to this working group:]National Institute for Occupational Safety andHealth]Environmental Protection Agency]Occupational Safety and Health Administration(Administración de la seguridad y salud laborales)]Occupational Safety and Health Administration]National Telecommunications and InformationAdministrationThe National Institutes of Health participates in someinteragency working group activities, as well.The FDA shares regulatory responsibilities forwireless phones with the Federal CommunicationsCommission (FCC). All phones that are sold in theUnited States must comply with FCC safetyguidelines that limit RF exposure. The FCC relies onthe FDA and other health agencies for safetyquestions about wireless phones.The FCC also regulates the base stations that thewireless phone networks rely upon. While thesebase stations operate at higher power than do thewireless phones themselves, the RF exposures thatpeople get from these base stations are typicallythousands of times lower than those they can get](https://usermanual.wiki/LG-Electronics-USA/CU400.Users-Manual/User-Guide-691791-Page-92.png)
