LG Electronics USA D2343PB Part15 Subpart B-LCD Monitor User Manual BEJD2343PB 2
LG Electronics USA Part15 Subpart B-LCD Monitor BEJD2343PB 2
Contents
- 1. BEJD2343PB_User Manual 1
- 2. BEJD2343PB_User Manual 3
- 3. BEJD2343PB_User Manual 2
BEJD2343PB_User Manual 2
ENGLISH OWNER’S MANUAL CINEMA 3D MONITOR Please read this manual carefully before operating your set and retain it for future reference. CINEMA 3D MONITOR MODEL D2343P D2743P www.lg.com 2 TABLE OF CONTENTS CONTENTS ENGLISH ENG ASSEMBLING AND PREPARING Unpacking Parts and buttons Setting up the Monitor set - Attaching the Stand Base - Detaching the Stand Base - Mounting on a table - Using the cable holder - Mounting on a wall 10 USING THE MONITOR SET 10 Connecting to a PC 10 - D-SUB connection 10 - DVI-D connection 10 - HDMI connection 12 CUSTOMIZING SETTINGS 13 Customizing Settings 13 - Menu Settings 14 - PICTURE 15 - COLOR 16 - DISPLAY 16 - VOLUME 17 - OTHERS 18 - FUNC.Settings 18 - 3D SETTINGS 19 20 - Setting Dual Play PICTURE MODE 21 - SUPER+RESOLUTION 22 SUPER ENERGY SAVING 23 TROUBLESHOOTING 25 TROUBLESHOOTING WHEN USING 3D MODE 26 SPECIFICATIONS 26 D2343P 27 D2743P 28 Preset Modes (Resolution) 29 Indicator 30 SAFETY PRECAUTIONS 30 - Precautions to take when viewing 3D images 30 - When using 3D Glasses 31 PROPER POSTURE 31 Proper posture for using the Monitor set. 31 Precautions to take when viewing 3D images ASSEMBLING AND PREPARING ASSEMBLING AND PREPARING Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories. CD(Owner's Manual) / Card DVI-D Cable (This cable is not included in all countries.) D-SUB Cable or Power Cord AC-DC Adapter ( Depending on the country ) Stand Body Stand Body AC-DC Adapter ( Depending on the country ) Two Screws Stand Base 3D Glasses 3D Glasses (Normal type) (Clip-on type) The number of 3D glasses may differ depending on the model of country. CAUTION Do not use any unapproved accessories to ensure the safety and product life span. yy Any damages or injuries by using unapproved accessories are not covered by the warranty. yy NOTE The accessories supplied with your product may vary depending on the model. yy Product specifications or contents in this manual may be changed without prior notice due to upgrade yy of product functions. ENG ENGLISH Unpacking 4 ASSEMBLING AND PREPARING Parts and buttons ENGLISH ENG Power Indicator yyLighting On: Turned on yyLighting Off: Turned off (Power Button) Button (See p.12) Connection panel (See p.10) ASSEMBLING AND PREPARING Setting up the Monitor set 1 Place the Monitor set with the screen side down on a flat and cushioned surface. D2743P 1 Attach the Stand Body to the monitor set. 2 Use two screws to fix the Stand Body and monitor set. 3 Attach the Stand Base. 4 Tighten the screw to the right with a coin. CAUTION Lay a foam mat or soft protective cloth on the surface to protect the screen from damage. Stand Body 2 D2343P 1 Attach the Stand Body to the monitor set. 2 Attach the Stand Base. 3 Tighten the screw to the right with a coin. Stand Body Stand Body Stand Base Stand Base ENG ENGLISH Attaching the Stand Base 6 ASSEMBLING AND PREPARING ENGLISH ENG Detaching the Stand Base D2743P 1 Place the Monitor set with the screen side 1 Turn the screw to the left with a coin. down on a flat and cushioned surface. 2 Pull out the Stand Base from the Stand Body. 3 Remove two screws and pull out the Stand Body from the monitor set. 2 D2343P 1 Pull out the Stand Body and Stand Base from the monitor set. 2 Turn the screw to the left with a coin. 3 Pull out the Stand Base. Stand Body Stand Base Stand Body Stand Base Stand Body Stand Body Stand Base CAUTION This illustration depicts the general model of yy connection. Your monitor may differ from the items shown in the picture. Do not carry the product upside down holding yy only the stand base. The product may fall and get damaged or injure your foot. ASSEMBLING AND PREPARING Mounting on a table 3 Press (Power) button on the bottom switch position on a table. Leave a 10 cm (minimum) space from the wall for proper ventilation. CAUTION Unplug the power cord before moving the Monitor to another location. Otherwise electric shock may occur. 10 cm 10 cm 10 cm 10 cm Using the cable holder 2 Connect the AC-DC Adapter and Power Cord to a wall outlet. Cable holder ENG ENGLISH panel to turn the power on. 1 Lift and tilt the Monitor set into its upright or 8 ASSEMBLING AND PREPARING WARNING Using the Kensington security system ENGLISH ENG When you adjust the angle, do not hold the bottom of the Monitor set frame as shown on the following illustration, as may injure your fingers. The Kensington security system connector is located at the back of the Monitor set. For more information of installation and using, refer to the manual supplied with the Kensington security system or visit http://www.kensington.com . Connect the Kensington security system cable between the Monitor set and a table. Do not touch or press the screen when adjusting the angle of the monitor. Do not hold this set like below picture.Monitor screen can detach from stand base and injure your body. NOTE The Kensington security system is optional. You can obtain it from most electronics stores. NOTE Tilt from +20 to -5 degrees up or down to adjust the angle of the Monitor set to suit your view. Front Rear ASSEMBLING AND PREPARING Model For proper ventilation, allow a clearance of 10 cm on each side and from the wall. Detailed instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup Guide. VESA (A x B) Standard screw Number of screws D2343P 75 x 75 M4 D2743P 100 x 100 CAUTION 10 cm 10 cm 10 cm 10 cm If you intend to mount the Monitor set to a wall, attach Wall mounting interface (optional parts) to the back of the set. When you install the Monitor set using a wall mounting interface (optional parts), attach it carefully so it will not drop. 1 Please, Use the screw and wall mount interface in accordance with VESA Standards. 2 If you use screw longer than standard, the monitor might be damaged internally. 3 If you use improper screw, the product might be damaged and drop from mounted position. In this case, LG Electronics is not responsible for it. 4 VESA compatible. 5 Please use VESA standard as below. 784.8 mm (30.9 inch) and under yy * Wall Mount Pad Thickness : 2.6 mm * Screw : Φ 4.0 mm x Pitch 0.7 mm x Length 10 mm 787.4 mm (31.0 inch) and above yy * Please use VESA standard wall mount pad and screws. Disconnect the power cord first, and then yy move or install the Monitor set. Otherwise electric shock may occur. If you install the Monitor set on a ceiling or yy slanted wall, it may fall and result in severe injury. Use only an authorized LG wall mount yy and contact the local dealer or qualified personnel. Do not over tighten the screws as this may yy cause damage to the Monitor set and void your warranty. Use only screws and wall mounts that yy meet the VESA standard. Any damages or injuries by misuse or using an improper accessory are not covered by the warranty. NOTE Use the screws that are listed on the VESA yy standard screw specifications. The wall mount kit will include an installation yy manual and necessary parts. The wall mount bracket is optional. You can yy obtain additional accessories from your local dealer. The length of screws may differ depending yy on the wall mount. Be sure to use the proper length. For more information, refer to the yy instructions supplied with the wall mount. ENG ENGLISH Mounting on a wall 10 USING THE MONITOR SET USING THE MONITOR SET ENGLISH ENG Connecting to a PC Your Monitor set supports Plug & Play*. yy *Plug & Play: A PC recognizes a connected device that users connect to a PC and turn on, without device configuration or user intervention. DVI-D connection Transmits a digital video signal from your PC to the Monitor set. Connect the PC and the Monitor set with a DVI cable as shown in the following illustrations. D-SUB connection Transmits analog video from your PC to the Monitor set. Connect the PC and the Monitor set with the supplied D-sub 15 pin signal cable as shown in the following illustrations. HDMI connection Transmits the digital video and audio signals from your PC or A/V to the Monitor set. Connect the PC or A/V and the Monitor set with the HDMI cable as shown in the following illustrations. NOTE When using a D-Sub signal input cable yy connector for Macintosh Mac adapter yy For Apple Macintosh use, a separate plug adapter is needed to change the 15 pin high density (3 row) D-SUB VGA connector on the supplied cable to a 15 pin 2 row connector. NOTE If you use HDMI PC, it can cause compatibility yy problem. USING THE MONITOR SET CAUTION NOTE When you want to use two PC in our Monitor, yy please connect the signal cable(D-SUB/ DVI-D/HDMI) respectively in Monitor set. If you turn the Monitor set on while it is cold, yy the screen may flicker. This is normal. Some red, green, or blue spots may appear yy on the screen. This is normal. Self Image Setting Function Press the power button on the bottom panel to turn the power on. When monitor power is turned on, the "Self Image Setting" Function is executed automatically. (Only supported in Analog Mode) NOTE "Self Image Setting" Function. yy This function provides the user with optimal display settings.When the user connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual input signals.(Only supported in Analog Mode) ‘AUTO’ Function. yy When you encounter problems such as blurry screen, blurred letters, screen flicker or tilted screen while using the device or after changing screen resolution, press the AUTO function button to improve resolution. (Only supported in Analog Mode) ENG ENGLISH Connect the signal yy input cable and tighten it by turning the screws clockwise. Do not press the screen with your finger for yy a long time as this may result in temporary distortion on the screen. Avoid displaying a fixed image on the yy screen for a long period of time to prevent image burn. Use a screensaver if possible. 11 12 CUSTOMIZING SETTINGS CUSTOMIZING SETTINGS ENGLISH ENG 1 Press the desired button on the bottom of the Monitor set. 2 Change the value of the menu item by pressing the buttons on the bottom of the Monitor set. To return to the upper menu or set other menu items, use the up arrow ( ) button. 3 Select EXIT to leave the OSD menu. Monitor set Buttons Button Description Accesses the main menus.(See p.13) OSD LOCKED/ UNLOCKED This function allows you to lock the current control settings, so that they cannot be inadvertently changed. Press and hold the MENU button for several seconds. The message "OSD LOCKED" should appear. You can unlock the OSD controls at any time by pushing the MENU button for several seconds. The message "OSD UNLOCKED" should appear. The 2D → 3D hot key is used to move to the 3D Settings menu. Recognizes the input image automatically and displays 3D images without having the 3D mode on manually. Activates menus to select and adjust various functions. When adjusting your display settings, always press the AUTO button on the MONITOR SETUP OSD. (Only supported in Analog Mode) The best display mode 1920 x 1080 You can choose the input signal. • When two input signals are connected, you can select the input signal (D-SUB/DVI/ HDMI) you want. • When only one signal is connected, it is automatically detected. The default setting is D-SUB. EXIT Exit the OSD(On Screen Display). (Power Button) Turns the power on or off. Power Indicator The power indicator stays red if the display is running properly (On Mode). If the display is in Sleep Mode, the power indicator blinks red. CUSTOMIZING SETTINGS 13 Customizing Settings ENG ENGLISH Menu Settings 1 Press MENU button on the bottom of the Monitor set to display the MENU OSD. 2 Set the options by pressing the ◄ or ► or ▼ buttons. 3 Select the "NEXT MENU" button to enter the more option settings. 4 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button. Each option is explained below. MENU Analog Digital HDMI BRIGHTNESS ● ● ● CONTRAST ● ● ● WIDE/ORIGINAL Description To adjust the brightness, contrast of the screen WIDE Switch to full screen mode according to input image signal. ● ● ● ORIGINAL Change the input image signal ratio to original. * This function works only if input resolution is lower than Monitor set ratio (16:9). RESET ● ● MENU > NEXT MENU PICTURE SHARPNESS ● Restore all factory default settings. Press the◄ , ► buttons to reset immediately. Analog Digital HDMI ● ● BLACK LEVEL OVER SCAN RESPONSE TIME COLOR GAMMA COLOR TEMP DISPLAY HORIZONTAL VERTICAL CLOCK PHASE LANGUAGE POWER INDICATOR WHITE BALANCE ● To adjust the clearness of the screen . ● To set offset level ● To improve the clarity and stability of the screen ● ● ● To set the response time of displayed picture. ● ● ● To customize the color of the screen ● To adjust the position of the screen ● To improve the clarity and stability of the screen VOLUME OTHERS Description ● ● Analog: D-SUB(Analog signal) input. yy Digital: DVI-D(Digital signal) input. yy HDMI: HDMI(Digital signal) input. yy ● ● To adjust the volume ● To customize the screen status for a user's operating environment 14 CUSTOMIZING SETTINGS PICTURE ENGLISH ENG 1 Press MENU button on the bottom of the Monitor set to display the MENU OSD. 2 Select the "NEXT MENU" button to enter the more option settings. 3 Enter to PICTURE by pressing the ▼ button. 4 Set the options by pressing the ◄ or ► or ▼ buttons. 5 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button. Each option is explained below. MENU > NEXT MENU > PICTURE Description SHARPNESS To adjust the clearness of the screen. BLACK LEVEL You can set the offset level. If you select'HIGH', the screen will be bright and if you select ‘LOW’, the screen will be dark.(only for HDMI input) * Offset?As the criteria for video signal, it is the darkest screen the monitor can show. OVER SCAN To select the range of output image for DTV timing in HDMI input.(only for HDMI input)Recommend overscan function to turn on when connect AV equipment. RESPONSE TIME You can set a response time for displayed pictures based on the speed of the screen. For a normal environment, it is recommended that you use 'NORMAL'. For a fast-moving picture, it is recommended that you use 'FAST'. yyOVER SCAN and RESPONSE TIME are disabled in 3D mode. CUSTOMIZING SETTINGS 15 COLOR ENG ENGLISH 1 Press MENU button on the bottom of the Monitor set to display the MENU OSD. 2 Select the "NEXT MENU" button to enter the more option settings. 3 Select COLOR by pressing the ► button. 4 Enter to COLOR by pressing the ▼ button. 5 Set the options by pressing the ◄ or ► or ▼ buttons. 6 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button. Each option is explained below. MENU > NEXT MENU > COLOR Description GAMMA Set your own gamma value. : GAMMA 0, GAMMA 1, GAMMA 2 on the monitor, high gamma values display whitish images and low gamma values display blackish images. COLOR TEMP CUSTOM • RED:Set your own red color levels. • GREEN: Set your own green color levels. • BLUE:Set your own blue color levels. Select the screen color. WARM: Set the screen to warm color temperature (more red). MEDIUM: Set the screen to medium color temperature. COOL: Set the screen to cool color temperature (more blue). 16 CUSTOMIZING SETTINGS DISPLAY ENGLISH ENG 1 Press MENU button on the bottom of the Monitor set to display the MENU OSD. 2 Select the "NEXT MENU" button to enter the more option settings. 3 Select DISPLAY by pressing the ► button. 4 Enter to DISPLAY by pressing the ▼ button. 5 Set the options by pressing the ◄ or ► or ▼ buttons. 6 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button. Each option is explained below. MENU > NEXT MENU > DISPLAY Description HORIZONTAL To move image left and right. VERTICAL To move image up and down. CLOCK To minimize any vertical bars or stripes visible on the screen background.The horizontal screen size will also change. PHASE To adjust the focus of the display. This item allows you to remove any horizontal noise and clear or sharpen the image of characters. This setting is only available for analog input. yy VOLUME 1 Press MENU button on the bottom of the Monitor set to display the MENU OSD. 2 Select the "NEXT MENU" button to enter the more option settings. 3 Select VOLUME by pressing the ► button. 4 Enter to VOLUME by pressing the ▼ button. 5 Set the options by pressing the ◄ or ► buttons. 6 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button. Each option is explained below. MENU > NEXT MENU > VOLUME VOLUME Description To adjust the volume of headphone/earphone.(Only for HDMI input)
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Tagged PDF : Yes XMP Toolkit : 3.1-702 Modify Date : 2012:04:09 15:07:32+08:00 Create Date : 2012:04:09 15:07:27+08:00 Metadata Date : 2012:04:09 15:07:32+08:00 Creator Tool : Adobe InDesign CS4 (6.0) Format : application/pdf Document ID : uuid:05f7b71d-7230-4f2f-9746-2b05679d1915 Instance ID : uuid:dee72644-eb1d-484c-baae-12b4bd060069 Producer : Adobe PDF Library 9.0 Page Count : 16 Creator : Adobe InDesign CS4 (6.0)EXIF Metadata provided by EXIF.tools