LG Electronics USA DU60PY10 PDP Display User Manual 479Hen

LG Electronics USA PDP Display 479Hen

Contents

Users Manual Part 1

Owner’s Manual 15•Component Input portsTo get better picture quality, connect a DVD player to the compo-nent input ports as shown below.How to connectConnect the audio and video cables from the external equip-ment's output jacks to the TV input jacks, as shown in thefigure.When connecting the TV to external equipment, match thejack colors (Video = yellow, Audio Left = white, and AudioRight = red).How to use1. Select the input source with using the TV/VIDEO button onthe remote control. (If connected to A/V INPUT , selectVideo input source).2. Operate the corresponding external equipment. Refer toexternal equipment operating the tv guide on screen system.Component ports on the TV YPBPRVideo output ports on DVD playerYYYYPbB-YCbPBPrR-YCrPRHow to connect1. Connect the DVD video outputs (Y, PB, PR) to the COMPONENT (Y, PB, PR) INPUT jacks on the TV and connect the DVDaudio outputs to the AUDIO INPUT jacks on the TV, as shown in the figure.2. If your DVD only has an S-Video output jack, connect this to the S-VIDEO input on the TV and connect the DVD audio outputsto the AUDIO INPUT jacks on the TV, as shown in the figure.Note: If your DVD player does not have component video output, use S-Video.How to use1. Turn on the DVD player, insert a DVD.2. Use the TV/VIDEO or COMP/RGB/HDMI button on the remote control to select Component 1 or Component 2. (If connectedto S-VIDEO, select the Video or Front Video external input source.)3. Refer to the DVD player's manual for operating instructions.ExternalExternal A/V Source SetupA/V Source SetupDVD SetupDVD SetupCABLECableANTENNAAC INPUTRLAUDIO VIDEODVICOMPONENT2DIGITAL AUDIO(OPTICAL)VIDEO INPUTAUDIO INPUTHDMI /DVI(VIDEO)AC INPUTAC INPUTBR(R) AUDIO (L)DIGITAL AUDIOOPTICAL (R) AUDIO (L)S-VIDEOCABLECableANTENNADVICOMPONENT2DIGITAL AUDIO(OPTICAL)VIDEO INPUTAUDIO INPUTHDMI /DVI(VIDEO)DVDorCamcorderVideo Game SetNotes:• Digital Audio will not work for Component 1 input source.• Digital Audio operation has priority if Digital Audio and AUDIO L/Rare connected at the same time.or
16 Plasma TVInstallation- This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you do receive Digitalsignals from a digital set-top box or other digital external device, refer to the figure as shown below.- This TV supports HDCP (High-bandwidth Digital Contents Protection) protocol for Digital Contents (480p,720p,1080i).How to connectUse the TV’s COMPONENT (Y, PB, PR) INPUT, RGB or HDMI/DVI jackfor video connections, depending on your set-top box connector. Then,make the corresponding audio connections.How to use1. Turn on the digital set-top box. (Refer to the owner’s manual for thedigital set-top box.) 2. Use TV/VIDEO or COMP/RGB/HDMI on the remote control to selectComponent 1,Component 2,RGB-DTV, or HDMI/DVI source.HDSTB SetupHDSTB SetupAC INPUT(R) AUDIO (L)RGB-DTV OUTPUTBR(R) AUDIO (L)DIGITAL AUDIOOPTICAL(R) AUDIO (L)DVI-DTV OUTPUTDIGITAL AUDIOOPTICALDVICOMPONENT2DIGITAL AUDIO(OPTICAL)VIDEO INPUTAUDIO INPUTHDMI /DVI(VIDEO)CABLECableANTENNAHDMI-DTV OUTPUTDigital Set-top Boxor oror orSignal480i480p720p1080iComponent 1/2YesYesYesYesRGB-DTV,HDMI/DVINoYesYesYesCableCARDCableCARDTMTM SetupSetupAC INPUTCABLECableANTENNAHow to useInsert the CableCARDTMTM received from Cable Service provider toCableCARDTMTM slot of TV back panel. If Host or CableCARDTMTM does not display on the screen, contact with Cableservice provider by phone.Note :• CableCARDTMTM has the types of Motorola, Scientific Atlanta, SCM etc..These 3 types of CableCARDTMTM can be used for this PLASMA TV.Caution: When removing the CableCARDTMTM, do notfall it as this may cause impact to theCableCARDTMTM.
Owner’s Manual 17InstallationHow to connect1. To get the best picture quality, adjust the PC graphics card to 1024x768, 60Hz.2. Use the TV’s RGB INPUT or HDMI/DVI (Digital Visual Interface) INPUT port for video connections, depending on your PC con-nector. • If the graphic card on the PC does not output analog and digital RGB simultaneously, connect only one of either RGB INPUTor DVI INPUT to display the PC on the TV.• If the graphic card on the PC does output analog and digital RGB simultaneously, set the TV to either RGB or HDMI/DVI; (theother mode is set to Plug and Play automatically by the TV.)3. Then, make the corresponding audio connections. If using a sound card, adjust the PC sound as required.How to use1. Turn on the PC and the TV.2. Turn on the display by pressing the POWER button on the TV's remote control.3. Select RGB-PC or HDMI/DVI input source in main input option of SETUP menu. (Refer to P.59)4. Check the image on your TV. There may be noise associated with the resolution, vertical pattern, contrast or brightness in PCmode. If noise is present, change the PC mode to another resolution, change the refresh rate to another rate or adjust thebrightness and contrast on the menu until the picture is clear. If the refresh rate of the PC graphic card can not be changed,change the PC graphic card or consult the manufacturer of the PC graphic card.Notes: • Depending on the graphics card, DOS mode may not work if you use a HDMI to DVI cable. • Avoid keeping a fixed image on the TV's screen for a long period of time. The fixed image may become permanentlyimprinted on the screen. Use the Orbiter screen saver when possible.• The synchronization input form for Horizontal and Vertical frequencies is separate.PC SetupPC SetupAC INPUTDVICOMPONENT2DIGITAL AUDIO(OPTICAL)VIDEO INPUTAUDIO INPUTHDMI /DVI(VIDEO)CABLECableANTENNA- This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. - The TV perceives 640x480, 60Hz as DTV 480p based on the PC graphic card, change the screen scanning rate for the graphiccard accordingly.Resolution640x350720x400640x480800x600HorizontalFrequency(KHz)31.46837.86131.46937.92731.46937.86137.50043.26970.0985.0870.0885.0359.9472.8075.0085.0035.15637.87948.07746.87553.67448.36356.47660.02356.2560.3172.1875.0085.0660.0070.0675.02VerticalFrequency(Hz) Resolution HorizontalFrequency(KHz)VerticalFrequency(Hz)1024x768Monitor Display Specifications (RGB-PC )
18 Plasma TVInstallationSend the TV’s audio to external audio equipment (stereo system) viathe Digital Audio Output (Optical) port.How to connect1. Connect one end of an optical cable to the TV Digital Audio(Optical) Output port.2. Connect the other end of the optical cable to the digital audio (opti-cal) input on the audio equipment.3. Set the “ TV Speaker option - Off” in the AUDIO menu. Refer topage 64.See the external audio equipment instruction manual for operation.Caution: Do not look into the optical output port.Looking at the laser beam may damageyour vision.DigitalDigital Audio OutputAudio OutputCableANTENNADVICOMPONENT2DIGITAL AUDIO(OPTICAL)VIDEO INPUTAUDIO INPUTHDMI /DVI(VIDEO)The TV has a special signal output capability which allows you tohook up a second TV or monitor.Connect the second TV or monitor to the TV’s MONITOR OUTPUT.See the Operating Manual of the second TV or monitor for furtherdetails regarding that device’s input settings.Note• Component, RGB-PC/RGB-DTV, HDMI/DVI, DTV input sourcescannot be used for Monitor out.CableANTENNAS-VIDEO IN(R) AUDIO (L) VIDEODVICOMPONENT2DIGITAL AUDIO(OPTICAL)VIDEO INPUTAUDIO INPUTHDMI /DVI(VIDEO)Monitor Out SetupMonitor Out SetupResolution640x480800x600HorizontalFrequency(KHz)31.46937.86137.50035.15637.87948.07746.87559.9472.8075.0056.2560.3172.1875.0048.36356.47660.02360.0070.0675.02VerticalFrequency(Hz) Resolution HorizontalFrequency(KHz)VerticalFrequency(Hz)1024x768Monitor Display Specifications (HDMI/DVI Mode)
Owner’s Manual 19HDMIHDMI/DVI (VIDEO)HDMI/DVI (VIDEO)-HDMITM, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC."-This TV SET can receive the High-Definition Multimedia Interface(HDMI) or Input of Digital Visual Interface(DVI).-This TV SET supports HDCP(High-bandwidth Digital Contents Protection) Protocol for TV SET(480p, 720p, 1080i) modes.-When you Connect with HDMI/DVI Source Devices (DVD Player or Set Top Box or PC) supporting Auto HDMI/DVI function, auto-matically, support Plug & Play and then set the HDMI/DVI Source Devices(1280 x 720p). After reading in HDMI/DVI SourceDevices using Display Data Channel(DDC) Protocol, EDID stored in TV SET is used . If HDMI/DVI Source Devices not support-ed Auto HDMI/DVI is been, the Resolution is setted, manually.- To get the best picture quality, adjust the DVD Player or Set Top Box output resolution to 1280 x 720p.- To get the best picture quality, adjust the PC graphics card to 1024 x 768, 60Hz.- When Source Devices have DVI Output Connector, you must connect audio with separated cable.(Refer to <How to connect>)How to connect1. When Source Devices(DVD Player or Set Top Box) support HDMI.- If Source Devices have HDMI Output Connector, Source Devices connect to DTV with HDMI Cable .(not supplied with the prod-uct).- If Source Devices support Auto HDMI, automatically, Source Devices divert output resolution in 1280x720p. But if not, resolutiondivert Manually Setting for reference Manual of Source Devices.- To get the best picture quality, adjust the DVD Player or Set Top Box output resolution to 1280 x 720p.- Because HDMI sends Digital Video and Audio with one cable, need not especial Audio Cable for using HDMI Cable.2. When Source Devices(DVD Player or Set Top Box) supports DVI.- If Source Devices have DVI Output Connector, Source Devices connect to DTV with HDMI to DVI Cable (not supplied with theproduct).- If Source Devices support Auto DVI, automatically, Source Devices divert output resolution in 1280x720p. But if not, resolutiondivert Manually Setting for reference Manual of Source Devices.- To get the best picture quality, adjust the DVD Player or Set Top Box output resolution to 1280 x 720p.- In this case, Audio use other cable. When Source Devices have Fiber Optic Digital Audio Output Connector, Digital Audio DVIInput(DVI) of DTV connect to Fiber Optic Digital Audio Cable (not supplied with the product) or when Source Devices have AnalogAudio Output Connector, RGB/DVI Audio Input of DTV connect to Audio Cable (not supplied with the product). And then you canlisten to normal Audio.3. When PC supports DVI.- If PC have DVI Output Connector, Source Devices connect to DTV with HDMI to DVI Cable (not supplied with the product).- To get the best picture quality, adjust the PC graphics card to 1024 x 768, 60Hz.- Use the DTV’s HDMI/DVI(VIDEO) for video connections, depending on your PC connector.- If the graphics card on the PC does not output analog RGB and DVI simultaneously, connect only one of either RGB Input orHDMI/DVI Input to display the PC on the DTV.- If he graphics card on the PC does output analog RGB and DVI simultaneously, set the DTV to either RGB Input or HDMI/DVIInput;(the other mode is set to Plug and Play automatically by the DTV.)- Then, make the corresponding audio connections. If using a sound card, adjust the PC sound as required.- In this case, Audio use other cable. When PC (or sound card of PC) have Fiber Optic Digital Audio Output Connector, Digital AudioDVI Input(DVI) of DTV connect to Fiber Optic Digital Audio Cable (not supplied with the product) or when PC (or sound card ofPC) have Analog Audio Output Connector, RGB/DVI Audio Input of DTV connect to Analog Audio Cable (not supplied with theproduct). And then you can listen to normal Audio.
20 Plasma TVHDMIReferenceCable sampleHDMI Cable (not supplied with the product)HDMI to DVI Cable (not supplied with the product)Fiber Optic Digital Audio Cable(not supplied with the product)Analog Audio Cable(RCA type)(not supplied with the product)Analog Audio Cable(Stereo to RCA type)(not supplied with the product)
Owner’s Manual 21HDMIHow to use1. Connect the HDMI/DVI Source Devices(DVD Player or Set Top Box or PC) and the TV SET.2. Turn on the display by pressing the POWER button on the TV SET and HDMI/DVI Source Devices remote control.3. Select HDMI/DVI Input source in Main Input option of SETUP menu.(Refer to P.60)4. Check the image on your TV SET. There may be noise associated with the resolution, vertical pattern, contrast or brightness inHDMI/DVI Source Devices. If noise is present, change the HDMI/DVI Source Devices to another resolution, change the refreshrate or adjust the brightness and contrast on the menu until the picture is clear. If the refresh rate of the PC graphics card cannot changed, change the PC graphics card or consult the manufacturer of the PC graphics card.Notes:- Depending on the graphics card, DOS mode may not work if you use a HDMI to DVI Cable.- Avoid keeping a fixed image on the TV SET screen for a long period of time. The fixed image may become permanently imprint-ed on the screen. Use the Orbiter screen saver when possible.- When Source Devices connected HDMI/DVI Input, output PC Resolution(VGA, SVGA, XGA), Position, Size may not fit toScreen. As shown the lower picture, press the Adjust button to adjust the screen Position of TV SET and contact an PC graph-ics card service center.- When Source Devices connected HDMI/DVI Input output TV SET Resolution(480p, 720p, 1080i), TV SET Display fit EIA/CEA-861-B Specification to Screen. If not, refer to the Manual of HDMI/DVI Source Devices or contact your service center.- In case HDMI/DVI Source Devices is not connected Cable or poor cable connection, "NO SIGNAL" OSD display in HDMI/DVIInput. And In case of, Video Resolution not supported TV SET output in HDMI/DVI Source Devices, "INVALID FORMAT" OSDdisplay. Refer to the Manual of HDMI/DVI Source Devices or contact your service center.ClosePOSITION GSIZEPHASERESETAdjustDFGEIn This Mode, the Supported TV SET Resolution Specification- 1920 x 1080 I @ 59.94Hz / 60Hz, 16:9- 1280 x 720 P @ 59.94Hz / 60Hz, 16:9(preferred format)- 704 x 480 P @ 59.94Hz / 60Hz, 16:9- 704 x 480 P @ 59.94Hz / 60Hz, 4:3In This Mode, the Supported PC Resolution Specification- 640 x 480 @ 60Hz- 640 x 480 @ 72Hz- 640 x 480 @ 75Hz- 800 x 600 @ 56Hz- 800 x 600 @ 60Hz- 800 x 600 @ 72Hz- 800 x 600 @ 75Hz- 1024 x 768 @ 60Hz(preferred format)- 1024 x 768 @ 70Hz- 1024 x 768 @ 75Hz
22 Plasma TVInstallationTV Guide On Screen Setup- The TV Guide On Screen system uses Setup information to provide you with show listings and lineups in your area—which areupdated several times a day. - Once you set up the TV according to manufacturer’s instructions, you are ready to set up the TV Guide On Screen system.Note: The TV Guide On Screen System interactive program guide provides listings for cable-ready, cable box, and digital cableservices as well as over-the-air broadcast. It does not provide listings for satellite services.AC INPUTAC INPUTS-VIDEOOUTIN(R) AUDIO (L) VIDEO34OUTPUTSWITCHANT INANT OUTDVICOMPONENT2DIGITAL AUDIO(OPTICAL)VIDEO INPUTAUDIO INPUTCABLEHDMI /DVI(VIDEO)CableANTENNAHow to connect VCR and Cable Box1. Antenna Service2. Cable Service without a Cable BoxAC INPUTAC INPUTS-VIDEOOUTIN(R) AUDIO (L) VIDEO34OUTPUTSWITCHDVICOMPONENT2DIGITAL AUDIO(OPTICAL)VIDEO INPUTAUDIO INPUTCABLEHDMI /DVI(VIDEO)CableANTENNAANT INANT OUTVCR RearVCR FrontVCR RearVCR Front
Owner’s Manual 23Installation3. Cable Service with a Cable BoxAC INPUTAC INPUTRFTVVCRCable (R) AUDIO (L) VIDEO34OUTPUTSWITCHCABLECableANTENNAS-VIDEOOUTIN(R) AUDIO (L) VIDEO34OUTPUTSWITCHANT INANT OUT4. Antenna and Cable Service without a Cable Box5. Antenna and Cable Service with a Cable BoxAC INPUTS-VIDEOOUTIN(R) AUDIO (L) VIDEO34OUTPUTSWITCHCABLECableANTENNAANT INANT OUTAC INPUTAC INPUTAC INPUTAC INPUTCABLECableANTENNAS-VIDEOOUTIN(R) AUDIO (L) VIDEO34OUTPUTSWITCHRFTVVCRCable (R) AUDIO (L) VIDEO34OUTPUTSWITCHANT OUTANT INCable Box RearVCR RearVCR FrontCable Box FrontorVCR RearVCR FrontCable Box RearVCR RearVCR FrontCable Box Frontor
24 Plasma TVInstallation1.Reminder ScreenThe TV Guide On Screen system's Reminder Screen appears:-- after initial TV set up-- if you power Off the TV and then power it back OnTo make a selection, use the D/Ebutton to highlight to an option, and press ENTER.• "Set up TV Guide On Screen now," displays the Welcome Screen.Press ENTER to begin Setup.• "Remind me to set up later" returns you to watching TV.• "Don't remind me again" returns you to watching TV and stops thereminder screen from appearing upon power On.How to use1. Screen 1: Country•This screen asks you the location of your TV.•Use the D/Ebutton to highlight a country.•Press ENTER to display Screen 2.2.Welcome ScreenThe TV Guide On Screen system's Welcome Screen appears:-- by pressing the TV Guide key-- when you power On your TV if you previously skipped "Set up TV Guide On Screen now" on the Reminder Screen.The Welcome Screen highlights features of the TV Guide On Screensystem.Press ENTER to begin Setup.Note:• The G-LINK cable is necessary for the TV Guide On Screen system to work with your Cable Box and VCR. See Page 22~23 for G-LINK connection instructions.

Navigation menu